diff options
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.c | 1541 |
1 files changed, 770 insertions, 771 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 7c6888c58c2..9a4b6cbddf2 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -33,106 +33,107 @@ #include "e1000_hw.h" -static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); -static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); -static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); -static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); -static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask); +static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask); +static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data); +static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data); +static s32 e1000_get_software_semaphore(struct e1000_hw *hw); static void e1000_release_software_semaphore(struct e1000_hw *hw); -static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); -static int32_t e1000_check_downshift(struct e1000_hw *hw); -static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); +static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw); +static s32 e1000_check_downshift(struct e1000_hw *hw); +static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); static void e1000_clear_hw_cntrs(struct e1000_hw *hw); static void e1000_clear_vfta(struct e1000_hw *hw); -static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); -static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); -static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); -static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); -static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank); -static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); -static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length); -static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); -static int32_t e1000_get_software_flag(struct e1000_hw *hw); -static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw); -static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout); -static int32_t e1000_id_led_init(struct e1000_hw *hw); -static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); -static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); +static s32 e1000_commit_shadow_ram(struct e1000_hw *hw); +static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, + bool link_up); +static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw); +static s32 e1000_detect_gig_phy(struct e1000_hw *hw); +static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank); +static s32 e1000_get_auto_rd_done(struct e1000_hw *hw); +static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length); +static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); +static s32 e1000_get_software_flag(struct e1000_hw *hw); +static s32 e1000_ich8_cycle_init(struct e1000_hw *hw); +static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout); +static s32 e1000_id_led_init(struct e1000_hw *hw); +static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, u32 cnf_base_addr, u32 cnf_size); +static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw); static void e1000_init_rx_addrs(struct e1000_hw *hw); static void e1000_initialize_hardware_bits(struct e1000_hw *hw); -static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); -static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); -static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum); -static int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr); -static int32_t e1000_mng_write_commit(struct e1000_hw *hw); -static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); -static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); -static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); -static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +static s32 e1000_mng_enable_host_if(struct e1000_hw *hw); +static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, u16 offset, u8 *sum); +static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr); +static s32 e1000_mng_write_commit(struct e1000_hw *hw); +static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); +static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t *data); -static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); -static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); -static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data); -static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t *data); -static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data); -static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); -static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data); +static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte); +static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte); +static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data); +static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 *data); +static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 data); +static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static void e1000_release_software_flag(struct e1000_hw *hw); -static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); +static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); +static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); +static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop); static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); -static int32_t e1000_wait_autoneg(struct e1000_hw *hw); -static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); -static int32_t e1000_set_phy_type(struct e1000_hw *hw); +static s32 e1000_wait_autoneg(struct e1000_hw *hw); +static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value); +static s32 e1000_set_phy_type(struct e1000_hw *hw); static void e1000_phy_init_script(struct e1000_hw *hw); -static int32_t e1000_setup_copper_link(struct e1000_hw *hw); -static int32_t e1000_setup_fiber_serdes_link(struct e1000_hw *hw); -static int32_t e1000_adjust_serdes_amplitude(struct e1000_hw *hw); -static int32_t e1000_phy_force_speed_duplex(struct e1000_hw *hw); -static int32_t e1000_config_mac_to_phy(struct e1000_hw *hw); -static void e1000_raise_mdi_clk(struct e1000_hw *hw, uint32_t *ctrl); -static void e1000_lower_mdi_clk(struct e1000_hw *hw, uint32_t *ctrl); -static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, uint32_t data, - uint16_t count); -static uint16_t e1000_shift_in_mdi_bits(struct e1000_hw *hw); -static int32_t e1000_phy_reset_dsp(struct e1000_hw *hw); -static int32_t e1000_write_eeprom_spi(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_write_eeprom_microwire(struct e1000_hw *hw, - uint16_t offset, uint16_t words, - uint16_t *data); -static int32_t e1000_spi_eeprom_ready(struct e1000_hw *hw); -static void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd); -static void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd); -static void e1000_shift_out_ee_bits(struct e1000_hw *hw, uint16_t data, - uint16_t count); -static int32_t e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t phy_data); -static int32_t e1000_read_phy_reg_ex(struct e1000_hw *hw,uint32_t reg_addr, - uint16_t *phy_data); -static uint16_t e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count); -static int32_t e1000_acquire_eeprom(struct e1000_hw *hw); +static s32 e1000_setup_copper_link(struct e1000_hw *hw); +static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw); +static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw); +static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); +static s32 e1000_config_mac_to_phy(struct e1000_hw *hw); +static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl); +static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl); +static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, + u16 count); +static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw); +static s32 e1000_phy_reset_dsp(struct e1000_hw *hw); +static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, + u16 offset, u16 words, + u16 *data); +static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw); +static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd); +static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd); +static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, + u16 count); +static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, + u16 phy_data); +static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr, + u16 *phy_data); +static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count); +static s32 e1000_acquire_eeprom(struct e1000_hw *hw); static void e1000_release_eeprom(struct e1000_hw *hw); static void e1000_standby_eeprom(struct e1000_hw *hw); -static int32_t e1000_set_vco_speed(struct e1000_hw *hw); -static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); -static int32_t e1000_set_phy_mode(struct e1000_hw *hw); -static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); -static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); -static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, - uint16_t duplex); -static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); +static s32 e1000_set_vco_speed(struct e1000_hw *hw); +static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw); +static s32 e1000_set_phy_mode(struct e1000_hw *hw); +static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer); +static u8 e1000_calculate_mng_checksum(char *buffer, u32 length); +static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, + u16 duplex); +static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw); /* IGP cable length table */ static const -uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = +u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25, 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40, @@ -143,7 +144,7 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; static const -uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = +u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, @@ -158,7 +159,7 @@ uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static int32_t +static s32 e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); @@ -212,8 +213,8 @@ e1000_set_phy_type(struct e1000_hw *hw) static void e1000_phy_init_script(struct e1000_hw *hw) { - uint32_t ret_val; - uint16_t phy_saved_data; + u32 ret_val; + u16 phy_saved_data; DEBUGFUNC("e1000_phy_init_script"); @@ -271,7 +272,7 @@ e1000_phy_init_script(struct e1000_hw *hw) e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); if (hw->mac_type == e1000_82547) { - uint16_t fused, fine, coarse; + u16 fused, fine, coarse; /* Move to analog registers page */ e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused); @@ -305,7 +306,7 @@ e1000_phy_init_script(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +s32 e1000_set_mac_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_mac_type"); @@ -425,22 +426,22 @@ e1000_set_mac_type(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_ich8lan: - hw->swfwhw_semaphore_present = TRUE; - hw->asf_firmware_present = TRUE; + hw->swfwhw_semaphore_present = true; + hw->asf_firmware_present = true; break; case e1000_80003es2lan: - hw->swfw_sync_present = TRUE; + hw->swfw_sync_present = true; /* fall through */ case e1000_82571: case e1000_82572: case e1000_82573: - hw->eeprom_semaphore_present = TRUE; + hw->eeprom_semaphore_present = true; /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: case e1000_82547_rev_2: - hw->asf_firmware_present = TRUE; + hw->asf_firmware_present = true; break; default: break; @@ -450,20 +451,20 @@ e1000_set_mac_type(struct e1000_hw *hw) * FD mode */ if (hw->mac_type == e1000_82543) - hw->bad_tx_carr_stats_fd = TRUE; + hw->bad_tx_carr_stats_fd = true; /* capable of receiving management packets to the host */ if (hw->mac_type >= e1000_82571) - hw->has_manc2h = TRUE; + hw->has_manc2h = true; /* In rare occasions, ESB2 systems would end up started without * the RX unit being turned on. */ if (hw->mac_type == e1000_80003es2lan) - hw->rx_needs_kicking = TRUE; + hw->rx_needs_kicking = true; if (hw->mac_type > e1000_82544) - hw->has_smbus = TRUE; + hw->has_smbus = true; return E1000_SUCCESS; } @@ -476,13 +477,13 @@ e1000_set_mac_type(struct e1000_hw *hw) void e1000_set_media_type(struct e1000_hw *hw) { - uint32_t status; + u32 status; DEBUGFUNC("e1000_set_media_type"); if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ - hw->tbi_compatibility_en = FALSE; + hw->tbi_compatibility_en = false; } switch (hw->device_id) { @@ -513,7 +514,7 @@ e1000_set_media_type(struct e1000_hw *hw) if (status & E1000_STATUS_TBIMODE) { hw->media_type = e1000_media_type_fiber; /* tbi_compatibility not valid on fiber */ - hw->tbi_compatibility_en = FALSE; + hw->tbi_compatibility_en = false; } else { hw->media_type = e1000_media_type_copper; } @@ -527,17 +528,17 @@ e1000_set_media_type(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +s32 e1000_reset_hw(struct e1000_hw *hw) { - uint32_t ctrl; - uint32_t ctrl_ext; - uint32_t icr; - uint32_t manc; - uint32_t led_ctrl; - uint32_t timeout; - uint32_t extcnf_ctrl; - int32_t ret_val; + u32 ctrl; + u32 ctrl_ext; + u32 icr; + u32 manc; + u32 led_ctrl; + u32 timeout; + u32 extcnf_ctrl; + s32 ret_val; DEBUGFUNC("e1000_reset_hw"); @@ -569,7 +570,7 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ - hw->tbi_compatibility_on = FALSE; + hw->tbi_compatibility_on = false; /* Delay to allow any outstanding PCI transactions to complete before * resetting the device @@ -682,7 +683,7 @@ e1000_reset_hw(struct e1000_hw *hw) msleep(20); break; case e1000_82573: - if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + if (!e1000_is_onboard_nvm_eeprom(hw)) { udelay(10); ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; @@ -729,7 +730,7 @@ e1000_reset_hw(struct e1000_hw *hw) } if (hw->mac_type == e1000_ich8lan) { - uint32_t kab = E1000_READ_REG(hw, KABGTXD); + u32 kab = E1000_READ_REG(hw, KABGTXD); kab |= E1000_KABGTXD_BGSQLBIAS; E1000_WRITE_REG(hw, KABGTXD, kab); } @@ -751,10 +752,10 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) { if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { /* Settings common to all PCI-express silicon */ - uint32_t reg_ctrl, reg_ctrl_ext; - uint32_t reg_tarc0, reg_tarc1; - uint32_t reg_tctl; - uint32_t reg_txdctl, reg_txdctl1; + u32 reg_ctrl, reg_ctrl_ext; + u32 reg_tarc0, reg_tarc1; + u32 reg_tctl; + u32 reg_txdctl, reg_txdctl1; /* link autonegotiation/sync workarounds */ reg_tarc0 = E1000_READ_REG(hw, TARC0); @@ -865,15 +866,15 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) * configuration and flow control settings. Clears all on-chip counters. Leaves * the transmit and receive units disabled and uninitialized. *****************************************************************************/ -int32_t +s32 e1000_init_hw(struct e1000_hw *hw) { - uint32_t ctrl; - uint32_t i; - int32_t ret_val; - uint32_t mta_size; - uint32_t reg_data; - uint32_t ctrl_ext; + u32 ctrl; + u32 i; + s32 ret_val; + u32 mta_size; + u32 reg_data; + u32 ctrl_ext; DEBUGFUNC("e1000_init_hw"); @@ -1019,7 +1020,7 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82573) { - uint32_t gcr = E1000_READ_REG(hw, GCR); + u32 gcr = E1000_READ_REG(hw, GCR); gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; E1000_WRITE_REG(hw, GCR, gcr); } @@ -1053,11 +1054,11 @@ e1000_init_hw(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code. *****************************************************************************/ -static int32_t +static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) { - uint16_t eeprom_data; - int32_t ret_val; + u16 eeprom_data; + s32 ret_val; DEBUGFUNC("e1000_adjust_serdes_amplitude"); @@ -1099,12 +1100,12 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw) * established. Assumes the hardware has previously been reset and the * transmitter and receiver are not enabled. *****************************************************************************/ -int32_t +s32 e1000_setup_link(struct e1000_hw *hw) { - uint32_t ctrl_ext; - int32_t ret_val; - uint16_t eeprom_data; + u32 ctrl_ext; + s32 ret_val; + u16 eeprom_data; DEBUGFUNC("e1000_setup_link"); @@ -1232,15 +1233,15 @@ e1000_setup_link(struct e1000_hw *hw) * link. Assumes the hardware has been previously reset and the transmitter * and receiver are not enabled. *****************************************************************************/ -static int32_t +static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) { - uint32_t ctrl; - uint32_t status; - uint32_t txcw = 0; - uint32_t i; - uint32_t signal = 0; - int32_t ret_val; + u32 ctrl; + u32 status; + u32 txcw = 0; + u32 i; + u32 signal = 0; + s32 ret_val; DEBUGFUNC("e1000_setup_fiber_serdes_link"); @@ -1379,12 +1380,12 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t +static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) { - uint32_t ctrl; - int32_t ret_val; - uint16_t phy_data; + u32 ctrl; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_copper_link_preconfig"); @@ -1428,7 +1429,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) if (hw->mac_type <= e1000_82543 || hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) - hw->phy_reset_disable = FALSE; + hw->phy_reset_disable = false; return E1000_SUCCESS; } @@ -1439,12 +1440,12 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static int32_t +static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) { - uint32_t led_ctrl; - int32_t ret_val; - uint16_t phy_data; + u32 led_ctrl; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_copper_link_igp_setup"); @@ -1470,7 +1471,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ if (hw->phy_type == e1000_phy_igp) { /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); + ret_val = e1000_set_d3_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D3\n"); return ret_val; @@ -1478,7 +1479,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) } /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, FALSE); + ret_val = e1000_set_d0_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D0\n"); return ret_val; @@ -1586,12 +1587,12 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static int32_t +static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t phy_data; - uint32_t reg_data; + s32 ret_val; + u16 phy_data; + u32 reg_data; DEBUGFUNC("e1000_copper_link_ggp_setup"); @@ -1691,7 +1692,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * firmware will have already initialized them. We only initialize * them if the HW is not in IAMT mode. */ - if (e1000_check_mng_mode(hw) == FALSE) { + if (!e1000_check_mng_mode(hw)) { /* Enable Electrical Idle on the PHY */ phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE; ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, @@ -1734,11 +1735,11 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static int32_t +static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t phy_data; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_copper_link_mgp_setup"); @@ -1838,11 +1839,11 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static int32_t +static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t phy_data; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_copper_link_autoneg"); @@ -1892,7 +1893,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) } } - hw->get_link_status = TRUE; + hw->get_link_status = true; return E1000_SUCCESS; } @@ -1909,10 +1910,10 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t +static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { - int32_t ret_val; + s32 ret_val; DEBUGFUNC("e1000_copper_link_postconfig"); if (hw->mac_type >= e1000_82544) { @@ -1932,7 +1933,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) /* Config DSP to improve Giga link quality */ if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, TRUE); + ret_val = e1000_config_dsp_after_link_change(hw, true); if (ret_val) { DEBUGOUT("Error Configuring DSP after link up\n"); return ret_val; @@ -1947,13 +1948,13 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t +static s32 e1000_setup_copper_link(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t i; - uint16_t phy_data; - uint16_t reg_data; + s32 ret_val; + u16 i; + u16 phy_data; + u16 reg_data; DEBUGFUNC("e1000_setup_copper_link"); @@ -2061,12 +2062,12 @@ e1000_setup_copper_link(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t -e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex) +static s32 +e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) { - int32_t ret_val = E1000_SUCCESS; - uint32_t tipg; - uint16_t reg_data; + s32 ret_val = E1000_SUCCESS; + u32 tipg; + u16 reg_data; DEBUGFUNC("e1000_configure_kmrn_for_10_100"); @@ -2097,12 +2098,12 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex) return ret_val; } -static int32_t +static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw) { - int32_t ret_val = E1000_SUCCESS; - uint16_t reg_data; - uint32_t tipg; + s32 ret_val = E1000_SUCCESS; + u16 reg_data; + u32 tipg; DEBUGFUNC("e1000_configure_kmrn_for_1000"); @@ -2134,12 +2135,12 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -int32_t +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t mii_autoneg_adv_reg; - uint16_t mii_1000t_ctrl_reg; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; DEBUGFUNC("e1000_phy_setup_autoneg"); @@ -2283,15 +2284,15 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t +static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) { - uint32_t ctrl; - int32_t ret_val; - uint16_t mii_ctrl_reg; - uint16_t mii_status_reg; - uint16_t phy_data; - uint16_t i; + u32 ctrl; + s32 ret_val; + u16 mii_ctrl_reg; + u16 mii_status_reg; + u16 phy_data; + u16 i; DEBUGFUNC("e1000_phy_force_speed_duplex"); @@ -2537,7 +2538,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) void e1000_config_collision_dist(struct e1000_hw *hw) { - uint32_t tctl, coll_dist; + u32 tctl, coll_dist; DEBUGFUNC("e1000_config_collision_dist"); @@ -2564,12 +2565,12 @@ e1000_config_collision_dist(struct e1000_hw *hw) * The contents of the PHY register containing the needed information need to * be passed in. ******************************************************************************/ -static int32_t +static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) { - uint32_t ctrl; - int32_t ret_val; - uint16_t phy_data; + u32 ctrl; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_config_mac_to_phy"); @@ -2623,10 +2624,10 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) * by the PHY rather than the MAC. Software must also configure these * bits when link is forced on a fiber connection. *****************************************************************************/ -int32_t +s32 e1000_force_mac_fc(struct e1000_hw *hw) { - uint32_t ctrl; + u32 ctrl; DEBUGFUNC("e1000_force_mac_fc"); @@ -2690,15 +2691,15 @@ e1000_force_mac_fc(struct e1000_hw *hw) * based on the flow control negotiated by the PHY. In TBI mode, the TFCE * and RFCE bits will be automaticaly set to the negotiated flow control mode. *****************************************************************************/ -static int32_t +static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t mii_status_reg; - uint16_t mii_nway_adv_reg; - uint16_t mii_nway_lp_ability_reg; - uint16_t speed; - uint16_t duplex; + s32 ret_val; + u16 mii_status_reg; + u16 mii_nway_adv_reg; + u16 mii_nway_lp_ability_reg; + u16 speed; + u16 duplex; DEBUGFUNC("e1000_config_fc_after_link_up"); @@ -2895,17 +2896,17 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * * Called by any function that needs to check the link status of the adapter. *****************************************************************************/ -int32_t +s32 e1000_check_for_link(struct e1000_hw *hw) { - uint32_t rxcw = 0; - uint32_t ctrl; - uint32_t status; - uint32_t rctl; - uint32_t icr; - uint32_t signal = 0; - int32_t ret_val; - uint16_t phy_data; + u32 rxcw = 0; + u32 ctrl; + u32 status; + u32 rctl; + u32 icr; + u32 signal = 0; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_check_for_link"); @@ -2923,7 +2924,7 @@ e1000_check_for_link(struct e1000_hw *hw) if (hw->media_type == e1000_media_type_fiber) { signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; if (status & E1000_STATUS_LU) - hw->get_link_status = FALSE; + hw->get_link_status = false; } } @@ -2947,7 +2948,7 @@ e1000_check_for_link(struct e1000_hw *hw) return ret_val; if (phy_data & MII_SR_LINK_STATUS) { - hw->get_link_status = FALSE; + hw->get_link_status = false; /* Check if there was DownShift, must be checked immediately after * link-up */ e1000_check_downshift(hw); @@ -2973,7 +2974,7 @@ e1000_check_for_link(struct e1000_hw *hw) } else { /* No link detected */ - e1000_config_dsp_after_link_change(hw, FALSE); + e1000_config_dsp_after_link_change(hw, false); return 0; } @@ -2983,7 +2984,7 @@ e1000_check_for_link(struct e1000_hw *hw) if (!hw->autoneg) return -E1000_ERR_CONFIG; /* optimize the dsp settings for the igp phy */ - e1000_config_dsp_after_link_change(hw, TRUE); + e1000_config_dsp_after_link_change(hw, true); /* We have a M88E1000 PHY and Auto-Neg is enabled. If we * have Si on board that is 82544 or newer, Auto @@ -3021,7 +3022,7 @@ e1000_check_for_link(struct e1000_hw *hw) * at gigabit speed, we turn on TBI compatibility. */ if (hw->tbi_compatibility_en) { - uint16_t speed, duplex; + u16 speed, duplex; ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); if (ret_val) { DEBUGOUT("Error getting link speed and duplex\n"); @@ -3036,7 +3037,7 @@ e1000_check_for_link(struct e1000_hw *hw) rctl = E1000_READ_REG(hw, RCTL); rctl &= ~E1000_RCTL_SBP; E1000_WRITE_REG(hw, RCTL, rctl); - hw->tbi_compatibility_on = FALSE; + hw->tbi_compatibility_on = false; } } else { /* If TBI compatibility is was previously off, turn it on. For @@ -3045,7 +3046,7 @@ e1000_check_for_link(struct e1000_hw *hw) * will look like CRC errors to to the hardware. */ if (!hw->tbi_compatibility_on) { - hw->tbi_compatibility_on = TRUE; + hw->tbi_compatibility_on = true; rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_SBP; E1000_WRITE_REG(hw, RCTL, rctl); @@ -3098,7 +3099,7 @@ e1000_check_for_link(struct e1000_hw *hw) E1000_WRITE_REG(hw, TXCW, hw->txcw); E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU)); - hw->serdes_link_down = FALSE; + hw->serdes_link_down = false; } /* If we force link for non-auto-negotiation switch, check link status * based on MAC synchronization for internal serdes media type. @@ -3109,11 +3110,11 @@ e1000_check_for_link(struct e1000_hw *hw) udelay(10); if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) { if (!(rxcw & E1000_RXCW_IV)) { - hw->serdes_link_down = FALSE; + hw->serdes_link_down = false; DEBUGOUT("SERDES: Link is up.\n"); } } else { - hw->serdes_link_down = TRUE; + hw->serdes_link_down = true; DEBUGOUT("SERDES: Link is down.\n"); } } @@ -3131,14 +3132,14 @@ e1000_check_for_link(struct e1000_hw *hw) * speed - Speed of the connection * duplex - Duplex setting of the connection *****************************************************************************/ -int32_t +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, - uint16_t *speed, - uint16_t *duplex) + u16 *speed, + u16 *duplex) { - uint32_t status; - int32_t ret_val; - uint16_t phy_data; + u32 status; + s32 ret_val; + u16 phy_data; DEBUGFUNC("e1000_get_speed_and_duplex"); @@ -3213,12 +3214,12 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static int32_t +static s32 e1000_wait_autoneg(struct e1000_hw *hw) { - int32_t ret_val; - uint16_t i; - uint16_t phy_data; + s32 ret_val; + u16 i; + u16 phy_data; DEBUGFUNC("e1000_wait_autoneg"); DEBUGOUT("Waiting for Auto-Neg to complete.\n"); @@ -3250,7 +3251,7 @@ e1000_wait_autoneg(struct e1000_hw *hw) ******************************************************************************/ static void e1000_raise_mdi_clk(struct e1000_hw *hw, - uint32_t *ctrl) + u32 *ctrl) { /* Raise the clock input to the Management Data Clock (by setting the MDC * bit), and then delay 10 microseconds. @@ -3268,7 +3269,7 @@ e1000_raise_mdi_clk(struct e1000_hw *hw, ******************************************************************************/ static void e1000_lower_mdi_clk(struct e1000_hw *hw, - uint32_t *ctrl) + u32 *ctrl) { /* Lower the clock input to the Management Data Clock (by clearing the MDC * bit), and then delay 10 microseconds. @@ -3289,11 +3290,11 @@ e1000_lower_mdi_clk(struct e1000_hw *hw, ******************************************************************************/ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, - uint32_t data, - uint16_t count) + u32 data, + u16 count) { - uint32_t ctrl; - uint32_t mask; + u32 ctrl; + u32 mask; /* We need to shift "count" number of bits out to the PHY. So, the value |