diff options
Diffstat (limited to 'drivers/net/dm9000.c')
| -rw-r--r-- | drivers/net/dm9000.c | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 2d4c4fc1d90..31770811360 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev) /* Checksum mode */ dm9000_set_rx_csum_unlocked(dev, db->rx_csum); - /* GPIO0 on pre-activate PHY */ - iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ - iow(db, DM9000_GPR, 0); /* Enable PHY */ ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; @@ -852,8 +849,8 @@ static void dm9000_timeout(struct net_device *dev) unsigned long flags; /* Save previous register address */ - reg_save = readb(db->io_addr); spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); netif_stop_queue(dev); dm9000_reset(db); @@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev) if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) return -EAGAIN; + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + mdelay(1); /* delay needs by DM9000B */ + /* Initialize DM9000 board */ dm9000_reset(db); dm9000_init_dm9000(dev); @@ -1592,10 +1593,15 @@ dm9000_probe(struct platform_device *pdev) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); } - if (!is_valid_ether_addr(ndev->dev_addr)) + if (!is_valid_ether_addr(ndev->dev_addr)) { dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please " "set using ifconfig\n", ndev->name); + random_ether_addr(ndev->dev_addr); + mac_src = "random"; + } + + platform_set_drvdata(pdev, ndev); ret = register_netdev(ndev); |