aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x')
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c8
-rw-r--r--drivers/net/bnx2x/bnx2x_sp.c86
2 files changed, 75 insertions, 19 deletions
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 7a891824fab..e4dea114d04 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -2984,8 +2984,12 @@ static inline void bnx2x_sp_prod_update(struct bnx2x *bp)
{
int func = BP_FUNC(bp);
- /* Make sure that BD data is updated before writing the producer */
- wmb();
+ /*
+ * Make sure that BD data is updated before writing the producer:
+ * BD data is written to the memory, the producer is read from the
+ * memory, thus we need a full memory barrier to ensure the ordering.
+ */
+ mb();
REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
bp->spq_prod_idx);
diff --git a/drivers/net/bnx2x/bnx2x_sp.c b/drivers/net/bnx2x/bnx2x_sp.c
index 5a213e476d8..cce87d5e760 100644
--- a/drivers/net/bnx2x/bnx2x_sp.c
+++ b/drivers/net/bnx2x/bnx2x_sp.c
@@ -1563,8 +1563,13 @@ static int bnx2x_execute_vlan_mac(struct bnx2x *bp,
idx++;
}
- /* Commit the data writes towards the memory */
- mb();
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
rc = bnx2x_sp_post(bp, o->ramrod_cmd, r->cid,
U64_HI(r->rdata_mapping),
@@ -2224,8 +2229,13 @@ static int bnx2x_set_rx_mode_e2(struct bnx2x *bp,
data->header.rule_cnt, p->rx_accept_flags,
p->tx_accept_flags);
- /* Commit writes towards the memory before sending a ramrod */
- mb();
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
/* Send a ramrod */
rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_FILTER_RULES, p->cid,
@@ -2918,16 +2928,22 @@ static int bnx2x_mcast_setup_e2(struct bnx2x *bp,
if (!o->total_pending_num)
bnx2x_mcast_refresh_registry_e2(bp, o);
- /* Commit writes towards the memory before sending a ramrod */
- mb();
-
- /* If CLEAR_ONLY was requested - don't send a ramrod and clear
+ /*
+ * If CLEAR_ONLY was requested - don't send a ramrod and clear
* RAMROD_PENDING status immediately.
*/
if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) {
raw->clear_pending(raw);
return 0;
} else {
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
+
/* Send a ramrod */
rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_MULTICAST_RULES,
raw->cid, U64_HI(raw->rdata_mapping),
@@ -3404,16 +3420,22 @@ static int bnx2x_mcast_setup_e1(struct bnx2x *bp,
if (rc)
return rc;
- /* Commit writes towards the memory before sending a ramrod */
- mb();
-
- /* If CLEAR_ONLY was requested - don't send a ramrod and clear
+ /*
+ * If CLEAR_ONLY was requested - don't send a ramrod and clear
* RAMROD_PENDING status immediately.
*/
if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) {
raw->clear_pending(raw);
return 0;
} else {
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
+
/* Send a ramrod */
rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, raw->cid,
U64_HI(raw->rdata_mapping),
@@ -4038,8 +4060,13 @@ static int bnx2x_setup_rss(struct bnx2x *bp,
data->capabilities |= ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY;
}
- /* Commit writes towards the memory before sending a ramrod */
- mb();
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
/* Send a ramrod */
rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_RSS_UPDATE, r->cid,
@@ -4505,7 +4532,13 @@ static inline int bnx2x_q_send_setup_e1x(struct bnx2x *bp,
/* Fill the ramrod data */
bnx2x_q_fill_setup_data_cmn(bp, params, rdata);
- mb();
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX],
U64_HI(data_mapping),
@@ -4528,6 +4561,13 @@ static inline int bnx2x_q_send_setup_e2(struct bnx2x *bp,
bnx2x_q_fill_setup_data_cmn(bp, params, rdata);
bnx2x_q_fill_setup_data_e2(bp, params, rdata);
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
return bnx2x_sp_post(bp, ramrod, o->cids[BNX2X_PRIMARY_CID_INDEX],
U64_HI(data_mapping),
@@ -4665,7 +4705,13 @@ static inline int bnx2x_q_send_update(struct bnx2x *bp,
/* Fill the ramrod data */
bnx2x_q_fill_update_data(bp, o, update_params, rdata);
- mb();
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
return bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_UPDATE,
o->cids[cid_index], U64_HI(data_mapping),
@@ -5484,7 +5530,13 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
rdata->path_id = BP_PATH(bp);
rdata->network_cos_mode = start_params->network_cos_mode;
- mb();
+ /*
+ * No need for an explicit memory barrier here as long we would
+ * need to ensure the ordering of writing to the SPQ element
+ * and updating of the SPQ producer which involves a memory
+ * read and we will have to put a full memory barrier there
+ * (inside bnx2x_sp_post()).
+ */
return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_START, 0,
U64_HI(data_mapping),
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-30 02:33:37 +0000