diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 57 |
1 files changed, 42 insertions, 15 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 2326774df84..58091961925 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -610,7 +610,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, /* reset and unreset the BigMac */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - udelay(10); + msleep(1); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); @@ -3525,13 +3525,19 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); /* Enable CL37 BAM */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_BAM, &val); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_BAM, val | 1); + if (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8073_BAM, &val); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8073_BAM, val | 1); + DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n"); + } if (params->loopback_mode == LOOPBACK_EXT) { bnx2x_807x_force_10G(bp, phy); DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n"); @@ -5302,7 +5308,7 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u16 autoneg_val, an_1000_val, an_10_100_val; - bnx2x_wait_reset_complete(bp, phy); + bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, 1 << NIG_LATCH_BC_ENABLE_MI_INT); @@ -5431,6 +5437,7 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, /* HW reset */ bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_wait_reset_complete(bp, phy); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); return bnx2x_848xx_cmn_config_init(phy, params, vars); @@ -5441,7 +5448,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u8 port = params->port, initialize = 1; + u8 port, initialize = 1; u16 val; u16 temp; u32 actual_phy_selection; @@ -5450,11 +5457,16 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, /* This is just for MDIO_CTL_REG_84823_MEDIA register. */ msleep(1); + if (CHIP_IS_E2(bp)) + port = BP_PATH(bp); + else + port = params->port; bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); - msleep(200); /* 100 is not enough */ - + bnx2x_wait_reset_complete(bp, phy); + /* Wait for GPHY to come out of reset */ + msleep(50); /* BCM84823 requires that XGXS links up first @ 10G for normal behavior */ temp = vars->line_speed; @@ -5625,7 +5637,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; - u8 port = params->port; + u8 port; + if (CHIP_IS_E2(bp)) + port = BP_PATH(bp); + else + port = params->port; bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_OUTPUT_LOW, port); @@ -6928,7 +6944,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, u8 reset_ext_phy) { struct bnx2x *bp = params->bp; - u8 phy_index, port = params->port; + u8 phy_index, port = params->port, clear_latch_ind = 0; DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port); /* disable attentions */ vars->link_status = 0; @@ -6966,9 +6982,18 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, params->phy[phy_index].link_reset( ¶ms->phy[phy_index], params); + if (params->phy[phy_index].flags & + FLAGS_REARM_LATCH_SIGNAL) + clear_latch_ind = 1; } } + if (clear_latch_ind) { + /* Clear latching indication */ + bnx2x_rearm_latch_signal(bp, port, 0); + bnx2x_bits_dis(bp, NIG_REG_LATCH_BC_0 + port*4, + 1 << NIG_LATCH_BC_ENABLE_MI_INT); + } if (params->phy[INT_PHY].link_reset) params->phy[INT_PHY].link_reset( ¶ms->phy[INT_PHY], params); @@ -6999,6 +7024,7 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, s8 port; s8 port_of_path = 0; + bnx2x_ext_phy_hw_reset(bp, 0); /* PART1 - Reset both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { u32 shmem_base, shmem2_base; @@ -7021,7 +7047,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, return -EINVAL; } /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + port_of_path*4, (NIG_MASK_XGXS0_LINK_STATUS | NIG_MASK_XGXS0_LINK10G | NIG_MASK_SERDES0_LINK_STATUS | @@ -7132,7 +7159,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); - bnx2x_ext_phy_hw_reset(bp, 1); + bnx2x_ext_phy_hw_reset(bp, 0); msleep(5); for (port = 0; port < PORT_MAX; port++) { u32 shmem_base, shmem2_base; |