diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 90 |
1 files changed, 52 insertions, 38 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 03823327db2..dc280bc8eba 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -238,8 +238,8 @@ source "drivers/net/arm/Kconfig" config AX88796 tristate "ASIX AX88796 NE2000 clone support" depends on ARM || MIPS || SUPERH - select CRC32 - select MII + select PHYLIB + select MDIO_BITBANG help AX88796 driver, using platform bus to provide chip detection and resources @@ -1498,7 +1498,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || MACH_MX31ADS) + || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1512,7 +1512,7 @@ config CS89x0 config CS89x0_NONISA_IRQ def_bool y depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440 config TC35815 tristate "TOSHIBA TC35815 Ethernet support" @@ -1944,7 +1944,8 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on M523x || M527x || M5272 || M528x || M520x || M532x || \ - MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28 + IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC + default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM select PHYLIB help Say Y here if you want to use the built-in 10/100 Fast ethernet @@ -2007,6 +2008,15 @@ config BCM63XX_ENET This driver supports the ethernet MACs in the Broadcom 63xx MIPS chipset family (BCM63XX). +config FTMAC100 + tristate "Faraday FTMAC100 10/100 Ethernet support" + depends on ARM + select MII + help + This driver supports the FTMAC100 10/100 Ethernet controller + from Faraday. It is used on Faraday A320, Andes AG101 and some + other ARM/NDS32 SoC's. + source "drivers/net/fs_enet/Kconfig" source "drivers/net/octeon/Kconfig" @@ -2098,7 +2108,9 @@ config E1000 config E1000E tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" + select CRC32 depends on PCI && (!SPARC32 || BROKEN) + select CRC32 ---help--- This driver supports the PCI-Express Intel(R) PRO/1000 gigabit ethernet family of adapters. For PCI or PCI-X e1000 adapters, @@ -2235,15 +2247,6 @@ config R8169 To compile this driver as a module, choose M here: the module will be called r8169. This is recommended. -config R8169_VLAN - bool "VLAN support" - depends on R8169 && VLAN_8021Q - ---help--- - Say Y here for the r8169 driver to support the functions required - by the kernel 802.1Q code. - - If in doubt, say Y. - config SB1250_MAC tristate "SB1250 Gigabit Ethernet support" depends on SIBYTE_SB1xxx_SOC @@ -2594,14 +2597,9 @@ config CHELSIO_T1_1G Enables support for Chelsio's gigabit Ethernet PCI cards. If you are using only 10G cards say 'N' here. -config CHELSIO_T3_DEPENDS - tristate - depends on PCI && INET - default y - config CHELSIO_T3 tristate "Chelsio Communications T3 10Gb Ethernet support" - depends on CHELSIO_T3_DEPENDS + depends on PCI && INET select FW_LOADER select MDIO help @@ -2619,14 +2617,9 @@ config CHELSIO_T3 To compile this driver as a module, choose M here: the module will be called cxgb3. -config CHELSIO_T4_DEPENDS - tristate - depends on PCI && INET - default y - config CHELSIO_T4 tristate "Chelsio Communications T4 Ethernet support" - depends on CHELSIO_T4_DEPENDS + depends on PCI select FW_LOADER select MDIO help @@ -2644,14 +2637,9 @@ config CHELSIO_T4 To compile this driver as a module choose M here; the module will be called cxgb4. -config CHELSIO_T4VF_DEPENDS - tristate - depends on PCI && INET - default y - config CHELSIO_T4VF tristate "Chelsio Communications T4 Virtual Function Ethernet support" - depends on CHELSIO_T4VF_DEPENDS + depends on PCI help This driver supports Chelsio T4-based gigabit and 10Gb Ethernet adapters with PCI-E SR-IOV Virtual Functions. @@ -2966,12 +2954,38 @@ config XEN_NETDEV_FRONTEND select XEN_XENBUS_FRONTEND default y help - The network device frontend driver allows the kernel to - access network devices exported exported by a virtual - machine containing a physical network device driver. The - frontend driver is intended for unprivileged guest domains; - if you are compiling a kernel for a Xen guest, you almost - certainly want to enable this. + This driver provides support for Xen paravirtual network + devices exported by a Xen network driver domain (often + domain 0). + + The corresponding Linux backend driver is enabled by the + CONFIG_XEN_NETDEV_BACKEND option. + + If you are compiling a kernel for use as Xen guest, you + should say Y here. To compile this driver as a module, chose + M here: the module will be called xen-netfront. + +config XEN_NETDEV_BACKEND + tristate "Xen backend network device" + depends on XEN_BACKEND + help + This driver allows the kernel to act as a Xen network driver + domain which exports paravirtual network devices to other + Xen domains. These devices can be accessed by any operating + system that implements a compatible front end. + + The corresponding Linux frontend driver is enabled by the + CONFIG_XEN_NETDEV_FRONTEND configuration option. + + The backend driver presents a standard network device + endpoint for each paravirtual network device to the driver + domain network stack. These can then be bridged or routed + etc in order to provide full network connectivity. + + If you are compiling a kernel to run in a Xen network driver + domain (often this is domain 0) you should say Y here. To + compile this driver as a module, chose M here: the module + will be called xen-netback. config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" |