diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 355 |
1 files changed, 166 insertions, 189 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7d57f4a25dc..5fb659f8b20 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3,10 +3,7 @@ # Network device configuration # -menu "Network device support" - depends on NET - -config NETDEVICES +menuconfig NETDEVICES default y if UML bool "Network device support" ---help--- @@ -28,6 +25,14 @@ config NETDEVICES # that for each of the symbols. if NETDEVICES +config NETDEVICES_MULTIQUEUE + bool "Netdevice multiple hardware queue support" + ---help--- + Say Y here if you want to allow the network stack to use multiple + hardware TX queues on an ethernet device. + + Most people will say N here. + config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT @@ -77,6 +82,16 @@ config BONDING To compile this driver as a module, choose M here: the module will be called bonding. +config MACVLAN + tristate "MAC-VLAN support (EXPERIMENTAL)" + depends on EXPERIMENTAL + ---help--- + This allows one to create virtual interfaces that map packets to + or from specific MAC addresses to a particular interface. + + To compile this driver as a module, choose M here: the module + will be called macvlan. + config EQUALIZER tristate "EQL (serial line load balancing) support" ---help--- @@ -151,11 +166,9 @@ source "drivers/net/phy/Kconfig" # Ethernet # -menu "Ethernet (10 or 100Mbit)" - depends on !UML - -config NET_ETHERNET +menuconfig NET_ETHERNET bool "Ethernet (10 or 100Mbit)" + depends on !UML ---help--- Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common type of Local Area Network (LAN) in universities and companies. @@ -180,9 +193,10 @@ config NET_ETHERNET kernel: saying N will just cause the configurator to skip all the questions about Ethernet network cards. If unsure, say N. +if NET_ETHERNET + config MII tristate "Generic Media Independent Interface device support" - depends on NET_ETHERNET help Most ethernet controllers have MII transceiver either as an external or internal device. It is safe to say Y or M here even if your @@ -190,8 +204,8 @@ config MII config MACB tristate "Atmel MACB support" - depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263) - select MII + depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 + select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 parts. Say Y to include support for the MACB chip. @@ -201,9 +215,18 @@ config MACB source "drivers/net/arm/Kconfig" +config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on ARM || MIPS + select CRC32 + select MII + help + AX88796 driver, using platform bus to provide + chip detection and resources + config MACE tristate "MACE (Power Mac ethernet) support" - depends on NET_ETHERNET && PPC_PMAC && PPC32 + depends on PPC_PMAC && PPC32 select CRC32 help Power Macintoshes and clones with Ethernet built-in on the @@ -226,7 +249,7 @@ config MACE_AAUI_PORT config BMAC tristate "BMAC (G3 ethernet) support" - depends on NET_ETHERNET && PPC_PMAC && PPC32 + depends on PPC_PMAC && PPC32 select CRC32 help Say Y for support of BMAC Ethernet interfaces. These are used on G3 @@ -237,7 +260,7 @@ config BMAC config ARIADNE tristate "Ariadne support" - depends on NET_ETHERNET && ZORRO + depends on ZORRO help If you have a Village Tronic Ariadne Ethernet adapter, say Y. Otherwise, say N. @@ -247,7 +270,7 @@ config ARIADNE config A2065 tristate "A2065 support" - depends on NET_ETHERNET && ZORRO + depends on ZORRO select CRC32 help If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, @@ -258,7 +281,7 @@ config A2065 config HYDRA tristate "Hydra support" - depends on NET_ETHERNET && ZORRO + depends on ZORRO select CRC32 help If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. @@ -268,7 +291,7 @@ config HYDRA config ZORRO8390 tristate "Zorro NS8390-based Ethernet support" - depends on NET_ETHERNET && ZORRO + depends on ZORRO select CRC32 help This driver is for Zorro Ethernet cards using an NS8390-compatible @@ -281,7 +304,7 @@ config ZORRO8390 config APNE tristate "PCMCIA NE2000 support" - depends on NET_ETHERNET && AMIGA_PCMCIA + depends on AMIGA_PCMCIA select CRC32 help If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, @@ -292,7 +315,7 @@ config APNE config APOLLO_ELPLUS tristate "Apollo 3c505 support" - depends on NET_ETHERNET && APOLLO + depends on APOLLO help Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card. If you don't have one made for Apollos, you can use one from a PC, @@ -301,7 +324,7 @@ config APOLLO_ELPLUS config MAC8390 bool "Macintosh NS 8390 based ethernet cards" - depends on NET_ETHERNET && MAC + depends on MAC select CRC32 help If you want to include a driver to support Nubus or LC-PDS @@ -311,7 +334,7 @@ config MAC8390 config MAC89x0 tristate "Macintosh CS89x0 based ethernet cards" - depends on NET_ETHERNET && MAC + depends on MAC ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a Nubus or LC-PDS network (Ethernet) card of this type, say Y and @@ -324,7 +347,7 @@ config MAC89x0 config MACSONIC tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" - depends on NET_ETHERNET && MAC + depends on MAC ---help--- Support for NatSemi SONIC based Ethernet devices. This includes the onboard Ethernet in many Quadras as well as some LC-PDS, @@ -338,7 +361,7 @@ config MACSONIC config MACMACE bool "Macintosh (AV) onboard MACE ethernet" - depends on NET_ETHERNET && MAC + depends on MAC select CRC32 help Support for the onboard AMD 79C940 MACE Ethernet controller used in @@ -348,7 +371,7 @@ config MACMACE config MVME147_NET tristate "MVME147 (Lance) Ethernet support" - depends on NET_ETHERNET && MVME147 + depends on MVME147 select CRC32 help Support for the on-board Ethernet interface on the Motorola MVME147 @@ -358,7 +381,7 @@ config MVME147_NET config MVME16x_NET tristate "MVME16x Ethernet support" - depends on NET_ETHERNET && MVME16x + depends on MVME16x help This is the driver for the Ethernet interface on the Motorola MVME162, 166, 167, 172 and 177 boards. Say Y here to include the @@ -367,7 +390,7 @@ config MVME16x_NET config BVME6000_NET tristate "BVME6000 Ethernet support" - depends on NET_ETHERNET && BVME6000 + depends on BVME6000 help This is the driver for the Ethernet interface on BVME4000 and BVME6000 VME boards. Say Y here to include the driver for this chip @@ -376,31 +399,15 @@ config BVME6000_NET config ATARILANCE tristate "Atari Lance support" - depends on NET_ETHERNET && ATARI + depends on ATARI help Say Y to include support for several Atari Ethernet adapters based on the AMD Lance chipset: RieblCard (with or without battery), or PAMCard VME (also the version by Rhotron, with different addresses). -config ATARI_BIONET - tristate "BioNet-100 support" - depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN - help - Say Y to include support for BioData's BioNet-100 Ethernet adapter - for the ACSI port. The driver works (has to work...) with a polled - I/O scheme, so it's rather slow :-( - -config ATARI_PAMSNET - tristate "PAMsNet support" - depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN - help - Say Y to include support for the PAMsNet Ethernet adapter for the - ACSI port ("ACSI node"). The driver works (has to work...) with a - polled I/O scheme, so it's rather slow :-( - config SUN3LANCE tristate "Sun3/Sun3x on-board LANCE support" - depends on NET_ETHERNET && (SUN3 || SUN3X) + depends on SUN3 || SUN3X help Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) featured an AMD Lance 10Mbit Ethernet controller on board; say Y @@ -413,7 +420,7 @@ config SUN3LANCE config SUN3_82586 bool "Sun3 on-board Intel 82586 support" - depends on NET_ETHERNET && SUN3 + depends on SUN3 help This driver enables support for the on-board Intel 82586 based Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note @@ -422,7 +429,7 @@ config SUN3_82586 config HPLANCE bool "HP on-board LANCE support" - depends on NET_ETHERNET && DIO + depends on DIO select CRC32 help If you want to use the builtin "LANCE" Ethernet controller on an @@ -430,21 +437,28 @@ config HPLANCE config LASI_82596 tristate "Lasi ethernet" - depends on NET_ETHERNET && GSC + depends on GSC help Say Y here to support the builtin Intel 82596 ethernet controller found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. +config SNI_82596 + tristate "SNI RM ethernet" + depends on NET_ETHERNET && SNI_RM + help + Say Y here to support the on-board Intel 82596 ethernet controller + built into SNI RM machines. + config MIPS_JAZZ_SONIC tristate "MIPS JAZZ onboard SONIC Ethernet support" - depends on NET_ETHERNET && MACH_JAZZ + depends on MACH_JAZZ help This is the driver for the onboard card of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM systems. config MIPS_AU1X00_ENET bool "MIPS AU1000 Ethernet support" - depends on NET_ETHERNET && SOC_AU1X00 + depends on SOC_AU1X00 select PHYLIB select CRC32 help @@ -453,11 +467,11 @@ config MIPS_AU1X00_ENET config NET_SB1250_MAC tristate "SB1250 Ethernet support" - depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC + depends on SIBYTE_SB1xxx_SOC config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" - depends on NET_ETHERNET && PCI && SGI_IP27 + depends on PCI && SGI_IP27 select CRC32 select MII help @@ -487,7 +501,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM config MIPS_SIM_NET tristate "MIPS simulator Network device" - depends on NET_ETHERNET && MIPS_SIM + depends on MIPS_SIM help The MIPSNET device is a simple Ethernet network device which is emulated by the MIPS Simulator. @@ -495,11 +509,11 @@ config MIPS_SIM_NET config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" - depends on NET_ETHERNET && SGI_IP32=y + depends on SGI_IP32=y config STNIC tristate "National DP83902AV support" - depends on NET_ETHERNET && SUPERH + depends on SUPERH select CRC32 help Support for cards based on the National Semiconductor DP83902AV @@ -511,7 +525,7 @@ config STNIC config SUNLANCE tristate "Sun LANCE support" - depends on NET_ETHERNET && SBUS + depends on SBUS select CRC32 help This driver supports the "le" interface present on all 32-bit Sparc @@ -524,7 +538,7 @@ config SUNLANCE config HAPPYMEAL tristate "Sun Happy Meal 10/100baseT support" - depends on NET_ETHERNET && (SBUS || PCI) + depends on SBUS || PCI select CRC32 help This driver supports the "hme" interface present on most Ultra @@ -537,7 +551,7 @@ config HAPPYMEAL config SUNBMAC tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)" - depends on NET_ETHERNET && SBUS && EXPERIMENTAL + depends on SBUS && EXPERIMENTAL select CRC32 help This driver supports the "be" interface available as an Sbus option. @@ -548,7 +562,7 @@ config SUNBMAC config SUNQE tristate "Sun QuadEthernet support" - depends on NET_ETHERNET && SBUS + depends on SBUS select CRC32 help This driver supports the "qe" 10baseT Ethernet device, available as @@ -560,7 +574,7 @@ config SUNQE config SUNGEM tristate "Sun GEM support" - depends on NET_ETHERNET && PCI + depends on PCI select CRC32 help Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also @@ -568,15 +582,21 @@ config SUNGEM config CASSINI tristate "Sun Cassini support" - depends on NET_ETHERNET && PCI + depends on PCI select CRC32 help Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf> +config SUNVNET + tristate "Sun Virtual Network support" + depends on SUN_LDOMS + help + Support for virtual network devices under Sun Logical Domains. + config NET_VENDOR_3COM bool "3COM cards" - depends on NET_ETHERNET && (ISA || EISA || MCA || PCI) + depends on ISA || EISA || MCA || PCI help If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -736,7 +756,7 @@ config TYPHOON config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" - depends on NET_ETHERNET && ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API help If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from @@ -748,7 +768,7 @@ config LANCE config NET_VENDOR_SMC bool "Western Digital/SMC cards" - depends on NET_ETHERNET && (ISA || MCA || EISA || MAC) + depends on ISA || MCA || EISA || MAC help If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -818,11 +838,27 @@ config ULTRA32 <file:Documentation/networking/net-modules.txt>. The module will be called smc-ultra32. +config SMC9194 + tristate "SMC 9194 support" + depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) + select CRC32 + ---help--- + This is support for the SMC9xxx based Ethernet cards. Choose this + option if you have a DELL laptop with the docking station, or + another SMC9192/9194 based chipset. Say Y if you want it compiled + into the kernel, and read the file + <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smc9194. + config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN) + depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN help This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it @@ -836,26 +872,10 @@ config SMC91X module, say M here and read <file:Documentation/kbuild/modules.txt> as well as <file:Documentation/networking/net-modules.txt>. -config SMC9194 - tristate "SMC 9194 support" - depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) - select CRC32 - ---help--- - This is support for the SMC9xxx based Ethernet cards. Choose this - option if you have a DELL laptop with the docking station, or - another SMC9192/9194 based chipset. Say Y if you want it compiled - into the kernel, and read the file - <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module - will be called smc9194. - config NET_NETX tristate "NetX Ethernet support" select MII - depends on NET_ETHERNET && ARCH_NETX + depends on ARCH_NETX help This is support for the Hilscher netX builtin Ethernet ports @@ -865,7 +885,7 @@ config NET_NETX config DM9000 tristate "DM9000 support" - depends on (ARM || MIPS) && NET_ETHERNET + depends on ARM || BLACKFIN || MIPS select CRC32 select MII ---help--- @@ -879,7 +899,7 @@ config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on NET_ETHERNET && ARCH_PXA + depends on ARCH_PXA help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. @@ -893,7 +913,7 @@ config SMC911X config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" - depends on NET_ETHERNET && ISA + depends on ISA help If you have a network (Ethernet) card belonging to this class, such as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO, @@ -945,7 +965,7 @@ source "drivers/net/tulip/Kconfig" config AT1700 tristate "AT1700/1720 support (EXPERIMENTAL)" - depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL + depends on (ISA || MCA_LEGACY) && EXPERIMENTAL select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read @@ -958,7 +978,7 @@ config AT1700 config DEPCA tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" - depends on NET_ETHERNET && (ISA || EISA || MCA) + depends on ISA || EISA || MCA select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read @@ -972,7 +992,7 @@ config DEPCA config HP100 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support" - depends on NET_ETHERNET && (ISA || EISA || PCI) + depends on ISA || EISA || PCI help If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from @@ -984,7 +1004,7 @@ config HP100 config NET_ISA bool "Other ISA cards" - depends on NET_ETHERNET && ISA + depends on ISA ---help--- If your network (Ethernet) card hasn't been mentioned yet and its bus system (that's the way the cards talks to the other components @@ -1147,7 +1167,7 @@ config SEEQ8005 config NE2_MCA tristate "NE/2 (ne2000 MCA version) support" - depends on NET_ETHERNET && MCA_LEGACY + depends on MCA_LEGACY select CRC32 help If you have a network (Ethernet) card of this type, say Y and read @@ -1160,7 +1180,7 @@ config NE2_MCA config IBMLANA tristate "IBM LAN Adapter/A support" - depends on NET_ETHERNET && MCA && MCA_LEGACY + depends on MCA && MCA_LEGACY ---help--- This is a Micro Channel Ethernet adapter. You need to set CONFIG_MCA to use this driver. It is both available as an in-kernel @@ -1176,7 +1196,7 @@ config IBMLANA config IBMVETH tristate "IBM LAN Virtual Ethernet support" - depends on NET_ETHERNET && PPC_PSERIES + depends on PPC_PSERIES ---help--- This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. @@ -1187,7 +1207,7 @@ config IBMVETH config IBM_EMAC tristate "PowerPC 4xx on-chip Ethernet support" - depends on 4xx + depends on 4xx && !PPC_MERGE help This driver supports the PowerPC 4xx EMAC family of on-chip Ethernet controllers. @@ -1257,7 +1277,7 @@ config IBM_EMAC_TAH config NET_PCI bool "EISA, VLB, PCI and on board controllers" - depends on NET_ETHERNET && (ISA || EISA || PCI) + depends on ISA || EISA || PCI help This is another class of network cards which attach directly to the bus. If you have one of those, say Y and read the Ethernet-HOWTO, @@ -1313,6 +1333,7 @@ config AMD8111_ETH To compile this driver as a module, choose M here and read <file:Documentation/networking/net-modules.txt>. The module will be called amd8111e. + config AMD8111E_NAPI bool "Enable NAPI support" depends on AMD8111_ETH @@ -1778,7 +1799,7 @@ config SC92031 config NET_POCKET bool "Pocket and portable adapters" - depends on NET_ETHERNET && PARPORT + depends on PARPORT ---help--- Cute little network (Ethernet) devices which attach to the parallel port ("pocket adapters"), commonly used with laptops. If you have @@ -1847,14 +1868,14 @@ config DE620 config SGISEEQ tristate "SGI Seeq ethernet controller support" - depends on NET_ETHERNET && SGI_IP22 + depends on SGI_IP22 help Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. config DECLANCE tristate "DEC LANCE ethernet controller support" - depends on NET_ETHERNET && MACH_DECSTATION + depends on MACH_DECSTATION select CRC32 help This driver is for the series of Ethernet controllers produced by @@ -1884,7 +1905,7 @@ config FEC2 config NE_H8300 tristate "NE2000 compatible support for H8/300" - depends on H8300 && NET_ETHERNET + depends on H8300 help Say Y here if you want to use the NE2000 compatible controller on the Renesas H8/300 processor. @@ -1892,7 +1913,7 @@ config NE_H8300 source "drivers/net/fec_8xx/Kconfig" source "drivers/net/fs_enet/Kconfig" -endmenu +endif # NET_ETHERNET # # Gigabit Ethernet @@ -2101,7 +2122,7 @@ config SKGE with better performance and more complete ethtool support. It does not support the link failover and network management - features that "portable" vendor supplied sk98lin driver does. + features available in the hardware. This driver supports adapters based on the original Yukon chipset: Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, @@ -2114,7 +2135,7 @@ config SKGE will be called skge. This is recommended. config SKY2 - tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" + tristate "SysKonnect Yukon2 support" depends on PCI select CRC32 ---help--- @@ -2129,92 +2150,15 @@ config SKY2 To compile this driver as a module, choose M here: the module will be called sky2. This is recommended. -config SK98LIN - tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" - depends on PCI - ---help--- - Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx - compliant Gigabit Ethernet Adapter. - - This driver supports the original Yukon chipset. This driver is - deprecated and will be removed from the kernel in the near future, - it has been replaced by the skge driver. skge is cleaner and - seems to work better. +config SKY2_DEBUG + bool "Debugging interface" + depends on SKY2 && DEBUG_FS + help + This option adds the ability to dump driver state for debugging. + The file debugfs/sky2/ethX displays the state of the internal + transmit and receive rings. - This driver does not support the newer Yukon2 chipset. A separate - driver, sky2, is provided to support Yukon2-based adapters. - - The following adapters are supported by this driver: - - 3Com 3C940 Gigabit LOM Ethernet Adapter - - 3Com 3C941 Gigabit LOM Ethernet Adapter - - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter - - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter - - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter - - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter - - Allied Telesyn AT-2971T Gigabit Ethernet Adapter - - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 - - EG1032 v2 Instant Gigabit Network Adapter - - EG1064 v2 Instant Gigabit Network Adapter - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) - - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) - - Marvell RDK-8001 Adapter - - Marvell RDK-8002 Adapter - - Marvell RDK-8003 Adapter - - Marvell RDK-8004 Adapter - - Marvell RDK-8006 Adapter - - Marvell RDK-8007 Adapter - - Marvell RDK-8008 Adapter - - Marvell RDK-8009 Adapter - - Marvell RDK-8010 Adapter - - Marvell RDK-8011 Adapter - - Marvell RDK-8012 Adapter - - Marvell RDK-8052 Adapter - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) - - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) - - SK-9521 10/100/1000Base-T Adapter - - SK-9521 V2.0 10/100/1000Base-T Adapter - - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) - - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter - - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) - - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) - - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter - - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) - - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) - - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) - - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) - - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) - - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) - - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter - - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) - - SMC EZ Card 1000 (SMC9452TXV.2) - - The adapters support Jumbo Frames. - The dual link adapters support link-failover and dual port features. - Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support - the scatter-gather functionality with sendfile(). Please refer to - <file:Documentation/networking/sk98lin.txt> for more information about - optional driver parameters. - Questions concerning this driver may be addressed to: - <linux@syskonnect.de> - - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read <file:Documentation/kbuild/modules.txt>. The module will - be called sk98lin. This is recommended. + If unsure, say N. config VIA_VELOCITY tristate "VIA Velocity support" @@ -2264,6 +2208,16 @@ config TSI108_ETH To compile this driver as a module, choose M here: the module will be called tsi108_eth. +config GELIC_NET + tristate "PS3 Gigabit Ethernet driver" + depends on PPC_PS3 + help + This driver supports the network device on the PS3 game + console. This driver has built-in support for Ethernet. + + To compile this driver as a module, choose M here: the + module will be called ps3_gelic. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx || PPC_86xx @@ -2303,7 +2257,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "MV-643XX Ethernet support" - depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32) + depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) select MII help This driver supports the gigabit Ethernet on the Marvell MV643XX @@ -2532,6 +2486,18 @@ source "drivers/atm/Kconfig" source "drivers/s390/net/Kconfig" +config XEN_NETDEV_FRONTEND + tristate "Xen network device frontend driver" + depends on XEN + default y + help + The network device frontend driver allows the kernel to + access network devices exported exported by a virtual + machine containing a physical network device driver. The + frontend driver is intended for unprivileged guest domains; + if you are compiling a kernel for a Xen guest, you almost + certainly want to enable this. + config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" depends on PPC_ISERIES @@ -2838,6 +2804,19 @@ config PPPOATM which can lead to bad results if the ATM peer loses state and changes its encapsulation unilaterally. +config PPPOL2TP + tristate "PPP over L2TP (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP + help + Support for PPP-over-L2TP socket family. L2TP is a protocol + used by ISPs and enterprises to tunnel PPP traffic over UDP + tunnels. L2TP is replacing PPTP for VPN uses. + + This kernel component handles only L2TP data packets: a + userland daemon handles L2TP the control protocol (tunnel + and session setup). One such daemon is OpenL2TP + (http://openl2tp.sourceforge.net/). + config SLIP tristate "SLIP (serial line) support" ---help--- @@ -2948,8 +2927,6 @@ config NETCONSOLE If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.txt> for details. -endif #NETDEVICES - config NETPOLL def_bool NETCONSOLE @@ -2961,4 +2938,4 @@ config NETPOLL_TRAP config NET_POLL_CONTROLLER def_bool NETPOLL -endmenu +endif # NETDEVICES |