aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r--drivers/net/Kconfig47
1 files changed, 36 insertions, 11 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce2fcdd4ab9..5a6895320b4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -484,7 +484,7 @@ config XTENSA_XT2000_SONIC
config MIPS_AU1X00_ENET
tristate "MIPS AU1000 Ethernet support"
- depends on SOC_AU1X00
+ depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
help
@@ -530,14 +530,15 @@ config SH_ETH
depends on SUPERH && \
(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
- CPU_SUBTYPE_SH7724)
+ CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
select CRC32
select MII
select MDIO_BITBANG
select PHYLIB
help
Renesas SuperH Ethernet device driver.
- This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
+ This driver supporting CPUs are:
+ - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
config SUNLANCE
tristate "Sun LANCE support"
@@ -913,7 +914,7 @@ config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+ depends on ARM || M32R || SUPERH || \
MIPS || BLACKFIN || MN10300 || COLDFIRE
help
This is a driver for SMC's 91x series of Ethernet chipsets,
@@ -1463,7 +1464,7 @@ config FORCEDETH
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
+ || ARCH_IXDP2X01 || MACH_MX31ADS)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1477,7 +1478,7 @@ config CS89x0
config CS89x0_NONISA_IRQ
def_bool y
depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
@@ -1659,6 +1660,7 @@ config R6040
depends on NET_PCI && PCI
select CRC32
select MII
+ select PHYLIB
help
This is a driver for the R6040 Fast Ethernet MACs found in the
the RDC R-321x System-on-chips.
@@ -1748,11 +1750,12 @@ config TLAN
Please email feedback to <torben.mathiasen@compaq.com>.
config KS8842
- tristate "Micrel KSZ8842"
- depends on HAS_IOMEM
+ tristate "Micrel KSZ8841/42 with generic bus interface"
+ depends on HAS_IOMEM && DMA_ENGINE
help
- This platform driver is for Micrel KSZ8842 / KS8842
- 2-port ethernet switch chip (managed, VLAN, QoS).
+ This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+ ethernet switch chip (managed, VLAN, QoS) from Micrel or
+ Timberdale(FPGA).
config KS8851
tristate "Micrel KS8851 SPI"
@@ -2601,6 +2604,29 @@ config CHELSIO_T4
To compile this driver as a module choose M here; the module
will be called cxgb4.
+config CHELSIO_T4VF_DEPENDS
+ tristate
+ depends on PCI && INET
+ default y
+
+config CHELSIO_T4VF
+ tristate "Chelsio Communications T4 Virtual Function Ethernet support"
+ depends on CHELSIO_T4VF_DEPENDS
+ help
+ This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+ adapters with PCI-E SR-IOV Virtual Functions.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module choose M here; the module
+ will be called cxgb4vf.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
@@ -2614,7 +2640,6 @@ config EHEA
config ENIC
tristate "Cisco VIC Ethernet NIC Support"
depends on PCI && INET
- select INET_LRO
help
This enables the support for the Cisco VIC Ethernet card.