diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/mmc/core/core.c | 16 | ||||
| -rw-r--r-- | drivers/mmc/core/core.h | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 23 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 21 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_cis.c | 167 | ||||
| -rw-r--r-- | drivers/mmc/host/Kconfig | 27 | ||||
| -rw-r--r-- | drivers/mmc/host/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 141 | ||||
| -rw-r--r-- | drivers/mmc/host/bfin_sdh.c | 639 | ||||
| -rw-r--r-- | drivers/mmc/host/davinci_mmc.c | 1349 | ||||
| -rw-r--r-- | drivers/mmc/host/mxcmmc.c | 10 | ||||
| -rw-r--r-- | drivers/mmc/host/of_mmc_spi.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/omap.c | 10 | ||||
| -rw-r--r-- | drivers/mmc/host/pxamci.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/s3cmci.c | 13 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci.c | 75 | ||||
| -rw-r--r-- | drivers/mmc/host/tmio_mmc.c | 2 |
18 files changed, 2339 insertions, 166 deletions
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index ab37a6d9d32..bb22ffd76ef 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -3,7 +3,7 @@ # config MMC_UNSAFE_RESUME - bool "Allow unsafe resume (DANGEROUS)" + bool "Assume MMC/SD cards are non-removable (DANGEROUS)" help If you say Y here, the MMC layer will assume that all cards stayed in their respective slots during the suspend. The @@ -14,3 +14,5 @@ config MMC_UNSAFE_RESUME This option is usually just for embedded systems which use a MMC/SD card for rootfs. Most people should say N here. + This option sets a default which can be overridden by the + module parameter "removable=0" or "removable=1". diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7dab2e5f4bc..30acd526582 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -48,6 +48,22 @@ int use_spi_crc = 1; module_param(use_spi_crc, bool, 0); /* + * We normally treat cards as removed during suspend if they are not + * known to be on a non-removable bus, to avoid the risk of writing + * back data to a different card after resume. Allow this to be + * overridden if necessary. + */ +#ifdef CONFIG_MMC_UNSAFE_RESUME +int mmc_assume_removable; +#else +int mmc_assume_removable = 1; +#endif +module_param_named(removable, mmc_assume_removable, bool, 0644); +MODULE_PARM_DESC( + removable, + "MMC/SD cards are removable and may be removed during suspend"); + +/* * Internal function. Schedule delayed work in the MMC work queue. */ static int mmc_schedule_delayed_work(struct delayed_work *work, diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 67ae6abc423..a811c52a165 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -54,7 +54,9 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr); int mmc_attach_sd(struct mmc_host *host, u32 ocr); int mmc_attach_sdio(struct mmc_host *host, u32 ocr); +/* Module parameters */ extern int use_spi_crc; +extern int mmc_assume_removable; /* Debugfs information for hosts and cards */ void mmc_add_host_debugfs(struct mmc_host *host); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index bfefce365ae..c11189446a1 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -602,25 +602,6 @@ static int mmc_awake(struct mmc_host *host) return err; } -#ifdef CONFIG_MMC_UNSAFE_RESUME - -static const struct mmc_bus_ops mmc_ops = { - .awake = mmc_awake, - .sleep = mmc_sleep, - .remove = mmc_remove, - .detect = mmc_detect, - .suspend = mmc_suspend, - .resume = mmc_resume, - .power_restore = mmc_power_restore, -}; - -static void mmc_attach_bus_ops(struct mmc_host *host) -{ - mmc_attach_bus(host, &mmc_ops); -} - -#else - static const struct mmc_bus_ops mmc_ops = { .awake = mmc_awake, .sleep = mmc_sleep, @@ -645,15 +626,13 @@ static void mmc_attach_bus_ops(struct mmc_host *host) { const struct mmc_bus_ops *bus_ops; - if (host->caps & MMC_CAP_NONREMOVABLE) + if (host->caps & MMC_CAP_NONREMOVABLE || !mmc_assume_removable) bus_ops = &mmc_ops_unsafe; else bus_ops = &mmc_ops; mmc_attach_bus(host, bus_ops); } -#endif - /* * Starting point for MMC card init. */ diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 10b2a4d20f5..fdd414eded0 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -606,23 +606,6 @@ static void mmc_sd_power_restore(struct mmc_host *host) mmc_release_host(host); } -#ifdef CONFIG_MMC_UNSAFE_RESUME - -static const struct mmc_bus_ops mmc_sd_ops = { - .remove = mmc_sd_remove, - .detect = mmc_sd_detect, - .suspend = mmc_sd_suspend, - .resume = mmc_sd_resume, - .power_restore = mmc_sd_power_restore, -}; - -static void mmc_sd_attach_bus_ops(struct mmc_host *host) -{ - mmc_attach_bus(host, &mmc_sd_ops); -} - -#else - static const struct mmc_bus_ops mmc_sd_ops = { .remove = mmc_sd_remove, .detect = mmc_sd_detect, @@ -643,15 +626,13 @@ static void mmc_sd_attach_bus_ops(struct mmc_host *host) { const struct mmc_bus_ops *bus_ops; - if (host->caps & MMC_CAP_NONREMOVABLE) + if (host->caps & MMC_CAP_NONREMOVABLE || !mmc_assume_removable) bus_ops = &mmc_sd_ops_unsafe; else bus_ops = &mmc_sd_ops; mmc_attach_bus(host, bus_ops); } -#endif - /* * Starting point for SD card init. */ diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index f85dcd53650..9538389783c 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -97,26 +97,56 @@ static const unsigned char speed_val[16] = static const unsigned int speed_unit[8] = { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 }; -/* FUNCE tuples with these types get passed to SDIO drivers */ -static const unsigned char funce_type_whitelist[] = { - 4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */ + +typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *, + const unsigned char *, unsigned); + +struct cis_tpl { + unsigned char code; + unsigned char min_size; + tpl_parse_t *parse; }; -static int cistpl_funce_whitelisted(unsigned char type) +static int cis_tpl_parse(struct mmc_card *card, struct sdio_func *func, + const char *tpl_descr, + const struct cis_tpl *tpl, int tpl_count, + unsigned char code, + const unsigned char *buf, unsigned size) { - int i; + int i, ret; - for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) { - if (funce_type_whitelist[i] == type) - return 1; + /* look for a matching code in the table */ + for (i = 0; i < tpl_count; i++, tpl++) { + if (tpl->code == code) + break; } - return 0; + if (i < tpl_count) { + if (size >= tpl->min_size) { + if (tpl->parse) + ret = tpl->parse(card, func, buf, size); + else + ret = -EILSEQ; /* known tuple, not parsed */ + } else { + /* invalid tuple */ + ret = -EINVAL; + } + if (ret && ret != -EILSEQ && ret != -ENOENT) { + printk(KERN_ERR "%s: bad %s tuple 0x%02x (%u bytes)\n", + mmc_hostname(card->host), tpl_descr, code, size); + } + } else { + /* unknown tuple */ + ret = -ENOENT; + } + + return ret; } -static int cistpl_funce_common(struct mmc_card *card, +static int cistpl_funce_common(struct mmc_card *card, struct sdio_func *func, const unsigned char *buf, unsigned size) { - if (size < 0x04 || buf[0] != 0) + /* Only valid for the common CIS (function 0) */ + if (func) return -EINVAL; /* TPLFE_FN0_BLK_SIZE */ @@ -129,20 +159,24 @@ static int cistpl_funce_common(struct mmc_card *card, return 0; } -static int cistpl_funce_func(struct sdio_func *func, +static int cistpl_funce_func(struct mmc_card *card, struct sdio_func *func, const unsigned char *buf, unsigned size) { unsigned vsn; unsigned min_size; - /* let SDIO drivers take care of whitelisted FUNCE tuples */ - if (cistpl_funce_whitelisted(buf[0])) - return -EILSEQ; + /* Only valid for the individual function's CIS (1-7) */ + if (!func) + return -EINVAL; + /* + * This tuple has a different length depending on the SDIO spec + * version. + */ vsn = func->card->cccr.sdio_vsn; min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42; - if (size < min_size || buf[0] != 1) + if (size < min_size) return -EINVAL; /* TPLFE_MAX_BLK_SIZE */ @@ -157,39 +191,32 @@ static int cistpl_funce_func(struct sdio_func *func, return 0; } +/* + * Known TPLFE_TYPEs table for CISTPL_FUNCE tuples. + * + * Note that, unlike PCMCIA, CISTPL_FUNCE tuples are not parsed depending + * on the TPLFID_FUNCTION value of the previous CISTPL_FUNCID as on SDIO + * TPLFID_FUNCTION is always hardcoded to 0x0C. + */ +static const struct cis_tpl cis_tpl_funce_list[] = { + { 0x00, 4, cistpl_funce_common }, + { 0x01, 0, cistpl_funce_func }, + { 0x04, 1+1+6, /* CISTPL_FUNCE_LAN_NODE_ID */ }, +}; + static int cistpl_funce(struct mmc_card *card, struct sdio_func *func, const unsigned char *buf, unsigned size) { - int ret; - - /* - * There should be two versions of the CISTPL_FUNCE tuple, - * one for the common CIS (function 0) and a version used by - * the individual function's CIS (1-7). Yet, the later has a - * different length depending on the SDIO spec version. - */ - if (func) - ret = cistpl_funce_func(func, buf, size); - else - ret = cistpl_funce_common(card, buf, size); - - if (ret && ret != -EILSEQ) { - printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u " - "type %u\n", mmc_hostname(card->host), size, buf[0]); - } + if (size < 1) + return -EINVAL; - return ret; + return cis_tpl_parse(card, func, "CISTPL_FUNCE", + cis_tpl_funce_list, + ARRAY_SIZE(cis_tpl_funce_list), + buf[0], buf, size); } -typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *, - const unsigned char *, unsigned); - -struct cis_tpl { - unsigned char code; - unsigned char min_size; - tpl_parse_t *parse; -}; - +/* Known TPL_CODEs table for CIS tuples */ static const struct cis_tpl cis_tpl_list[] = { { 0x15, 3, cistpl_vers_1 }, { 0x20, 4, cistpl_manfid }, @@ -268,46 +295,38 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) break; } - for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++) - if (cis_tpl_list[i].code == tpl_code) - break; - if (i < ARRAY_SIZE(cis_tpl_list)) { - const struct cis_tpl *tpl = cis_tpl_list + i; - if (tpl_link < tpl->min_size) { - printk(KERN_ERR - "%s: bad CIS tuple 0x%02x" - " (length = %u, expected >= %u)\n", - mmc_hostname(card->host), - tpl_code, tpl_link, tpl->min_size); - ret = -EINVAL; - } else if (tpl->parse) { - ret = tpl->parse(card, func, - this->data, tpl_link); - } + /* Try to parse the CIS tuple */ + ret = cis_tpl_parse(card, func, "CIS", + cis_tpl_list, ARRAY_SIZE(cis_tpl_list), + tpl_code, this->data, tpl_link); + if (ret == -EILSEQ || ret == -ENOENT) { /* - * We don't need the tuple anymore if it was - * successfully parsed by the SDIO core or if it is - * not going to be parsed by SDIO drivers. + * The tuple is unknown or known but not parsed. + * Queue the tuple for the function driver. */ - if (!ret || ret != -EILSEQ) - kfree(this); - } else { - /* unknown tuple */ - ret = -EILSEQ; - } - - if (ret == -EILSEQ) { - /* this tuple is unknown to the core or whitelisted */ this->next = NULL; this->code = tpl_code; this->size = tpl_link; *prev = this; prev = &this->next; - printk(KERN_DEBUG - "%s: queuing CIS tuple 0x%02x length %u\n", - mmc_hostname(card->host), tpl_code, tpl_link); + + if (ret == -ENOENT) { + /* warn about unknown tuples */ + printk(KERN_WARNING "%s: queuing unknown" + " CIS tuple 0x%02x (%u bytes)\n", + mmc_hostname(card->host), + tpl_code, tpl_link); + } + /* keep on analyzing tuples */ ret = 0; + } else { + /* + * We don't need the tuple anymore if it was + * successfully parsed by the SDIO core or if it is + * not going to be queued for a driver. + */ + kfree(this); } ptr += tpl_link; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index e04b751680d..9d405b18178 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -251,6 +251,14 @@ config MMC_MVSDIO To compile this driver as a module, choose M here: the module will be called mvsdio. +config MMC_DAVINCI + tristate "TI DAVINCI Multimedia Card Interface support" + depends on ARCH_DAVINCI + help + This selects the TI DAVINCI Multimedia card Interface. + If you have an DAVINCI board with a Multimedia Card slot, + say Y or M here. If unsure, say N. + config MMC_SPI tristate "MMC/SD/SDIO over SPI" depends on SPI_MASTER && !HIGHMEM && HAS_DMA @@ -357,3 +365,22 @@ config MMC_VIA_SDMMC If you have a controller with this interface, say Y or M here. If unsure, say N. + +config SDH_BFIN + tristate "Blackfin Secure Digital Host support" + depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512)) + help + If you say yes here you will get support for the Blackfin on-chip + Secure Digital Host interface. This includes support for MMC and + SD cards. + + To compile this driver as a module, choose M here: the + module will be called bfin_sdh. + + If unsure, say N. + +config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND + bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround" + depends on SDH_BFIN + help + If you say yes here SD-Cards may work on the EZkit. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index abcb0400e06..ded4d8cdd9d 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_MSM7X00A) += msm_sdcc.o obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o +obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o ifeq ($(CONFIG_OF),y) obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o @@ -34,6 +35,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o +obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index fc25586b7ee..8072128e933 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -25,6 +25,8 @@ #include <linux/stat.h> #include <linux/mmc/host.h> + +#include <mach/atmel-mci.h> #include <linux/atmel-mci.h> #include <asm/io.h> @@ -92,6 +94,7 @@ struct atmel_mci_dma { * @need_clock_update: Update the clock rate before the next request. * @need_reset: Reset controller before next request. * @mode_reg: Value of the MR register. + * @cfg_reg: Value of the CFG register. * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus * rate and timeout calculations. * @mapbase: Physical address of the MMIO registers. @@ -155,6 +158,7 @@ struct atmel_mci { bool need_clock_update; bool need_reset; u32 mode_reg; + u32 cfg_reg; unsigned long bus_hz; unsigned long mapbase; struct clk *mck; @@ -223,6 +227,19 @@ static bool mci_has_rwproof(void) } /* + * The new MCI2 module isn't 100% compatible with the old MCI module, + * and it has a few nice features which we want to use... + */ +static inline bool atmci_is_mci2(void) +{ + if (cpu_is_at91sam9g45()) + return true; + + return false; +} + + +/* * The debugfs stuff below is mostly optimized away when * CONFIG_DEBUG_FS is not set. */ @@ -357,12 +374,33 @@ static int atmci_regs_show(struct seq_file *s, void *v) buf[MCI_BLKR / 4], buf[MCI_BLKR / 4] & 0xffff, (buf[MCI_BLKR / 4] >> 16) & 0xffff); + if (atmci_is_mci2()) + seq_printf(s, "CSTOR:\t0x%08x\n", buf[MCI_CSTOR / 4]); /* Don't read RSPR and RDR; it will consume the data there */ atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]); atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]); + if (atmci_is_mci2()) { + u32 val; + + val = buf[MCI_DMA / 4]; + seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n", + val, val & 3, + ((val >> 4) & 3) ? + 1 << (((val >> 4) & 3) + 1) : 1, + val & MCI_DMAEN ? " DMAEN" : ""); + + val = buf[MCI_CFG / 4]; + seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n", + val, + val & MCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", + val & MCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", + val & MCI_CFG_HSMODE ? " HSMODE" : "", + val & MCI_CFG_LSYNC ? " LSYNC" : ""); + } + kfree(buf); return 0; @@ -557,6 +595,10 @@ static void atmci_dma_complete(void *arg) dev_vdbg(&host->pdev->dev, "DMA complete\n"); + if (atmci_is_mci2()) + /* Disable DMA hardware handshaking on MCI */ + mci_writel(host, DMA, mci_readl(host, DMA) & ~MCI_DMAEN); + atmci_dma_cleanup(host); /* @@ -592,7 +634,7 @@ static void atmci_dma_complete(void *arg) } static int -atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) +atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) { struct dma_chan *chan; struct dma_async_tx_descriptor *desc; @@ -624,6 +666,9 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) if (!chan) return -ENODEV; + if (atmci_is_mci2()) + mci_writel(host, DMA, MCI_DMA_CHKSIZE(3) | MCI_DMAEN); + if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; else @@ -641,10 +686,6 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) host->dma.data_desc = desc; desc->callback = atmci_dma_complete; desc->callback_param = host; - desc->tx_submit(desc); - - /* Go! */ - chan->device->device_issue_pending(chan); return 0; unmap_exit: @@ -652,13 +693,26 @@ unmap_exit: return -ENOMEM; } +static void atmci_submit_data(struct atmel_mci *host) +{ + struct dma_chan *chan = host->data_chan; + struct dma_async_tx_descriptor *desc = host->dma.data_desc; + + if (chan) { + desc->tx_submit(desc); + chan->device->device_issue_pending(chan); + } +} + #else /* CONFIG_MMC_ATMELMCI_DMA */ -static int atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) +static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) { return -ENOSYS; } +static void atmci_submit_data(struct atmel_mci *host) {} + static void atmci_stop_dma(struct atmel_mci *host) { /* Data transfer was stopped by the interrupt handler */ @@ -672,7 +726,7 @@ static void atmci_stop_dma(struct atmel_mci *host) * Returns a mask of interrupt flags to be enabled after the whole * request has been prepared. */ -static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) +static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) { u32 iflags; @@ -683,7 +737,7 @@ static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) host->data = data; iflags = ATMCI_DATA_ERROR_FLAGS; - if (atmci_submit_data_dma(host, data)) { + if (atmci_prepare_data_dma(host, data)) { host->data_chan = NULL; /* @@ -729,6 +783,8 @@ static void atmci_start_request(struct atmel_mci *host, mci_writel(host, CR, MCI_CR_SWRST); mci_writel(host, CR, MCI_CR_MCIEN); mci_writel(host, MR, host->mode_reg); + if (atmci_is_mci2()) + mci_writel(host, CFG, host->cfg_reg); host->need_reset = false; } mci_writel(host, SDCR, slot->sdc_reg); @@ -744,6 +800,7 @@ static void atmci_start_request(struct atmel_mci *host, while (!(mci_readl(host, SR) & MCI_CMDRDY)) cpu_relax(); } + iflags = 0; data = mrq->data; if (data) { atmci_set_timeout(host, slot, data); @@ -753,15 +810,17 @@ static void atmci_start_request(struct atmel_mci *host, | MCI_BLKLEN(data->blksz)); dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + + iflags |= atmci_prepare_data(host, data); } - iflags = MCI_CMDRDY; + iflags |= MCI_CMDRDY; cmd = mrq->cmd; cmdflags = atmci_prepare_command(slot->mmc, cmd); atmci_start_command(host, cmd, cmdflags); if (data) - iflags |= atmci_submit_data(host, data); + atmci_submit_data(host); if (mrq->stop) { host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); @@ -857,6 +916,8 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk_enable(host->mck); mci_writel(host, CR, MCI_CR_SWRST); mci_writel(host, CR, MCI_CR_MCIEN); + if (atmci_is_mci2()) + mci_writel(host, CFG, host->cfg_reg); } /* @@ -1095,6 +1156,8 @@ static void atmci_detect_change(unsigned long data) mci_writel(host, CR, MCI_CR_SWRST); mci_writel(host, CR, MCI_CR_MCIEN); mci_writel(host, MR, host->mode_reg); + if (atmci_is_mci2()) + mci_writel(host, CFG, host->cfg_reg); host->data = NULL; host->cmd = NULL; @@ -1584,14 +1647,47 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, #ifdef CONFIG_MMC_ATMELMCI_DMA static bool filter(struct dma_chan *chan, void *slave) { - struct dw_dma_slave *dws = slave; + struct mci_dma_data *sl = slave; - if (dws->dma_dev == chan->device->dev) { - chan->private = dws; + if (sl && find_slave_dev(sl) == chan->device->dev) { + chan->private = slave_data_ptr(sl); return true; - } else + } else { return false; + } } + +static void atmci_configure_dma(struct atmel_mci *host) +{ + struct mci_platform_data *pdata; + + if (host == NULL) + return; + + pdata = host->pdev->dev.platform_data; + + if (pdata && find_slave_dev(pdata->dma_slave)) { + dma_cap_mask_t mask; + + setup_dma_addr(pdata->dma_slave, + host->mapbase + MCI_TDR, + host->mapbase + MCI_RDR); + + /* Try to grab a DMA channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + host->dma.chan = + dma_request_channel(mask, filter, pdata->dma_slave); + } + if (!host->dma.chan) + dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); + else + dev_info(&host->pdev->dev, + "Using %s for DMA transfers\n", + dma_chan_name(host->dma.chan)); +} +#else +static void atmci_configure_dma(struct atmel_mci *host) {} #endif static int __init atmci_probe(struct platform_device *pdev) @@ -1645,22 +1741,7 @@ static int __init atmci_probe(struct platform_device *pdev) if (ret) goto err_request_irq; -#ifdef CONFIG_MMC_ATMELMCI_DMA - if (pdata->dma_slave.dma_dev) { - struct dw_dma_slave *dws = &pdata->dma_slave; - dma_cap_mask_t mask; - - dws->tx_reg = regs->start + MCI_TDR; - dws->rx_reg = regs->start + MCI_RDR; - - /* Try to grab a DMA channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = dma_request_channel(mask, filter, dws); - } - if (!host->dma.chan) - dev_notice(&pdev->dev, "DMA not available, using PIO\n"); -#endif /* CONFIG_MMC_ATMELMCI_DMA */ + atmci_configure_dma(host); platform_set_drvdata(pdev, host); diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c new file mode 100644 index 00000000000..3343a57355c --- /dev/null +++ b/drivers/mmc/host/bfin_sdh.c @@ -0,0 +1,639 @@ +/* + * bfin_sdh.c - Analog Devices Blackfin SDH Controller + * + * Copyright (C) 2007-2009 Analog Device Inc. + * + * Licensed under the GPL-2 or later. + */ + +#define DRIVER_NAME "bfin-sdh" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/mmc/host.h> +#include <linux/proc_fs.h> + +#include <asm/cacheflush.h> +#include <asm/dma.h> +#include <asm/portmux.h> +#include <asm/bfin_sdh.h> + +#if defined(CONFIG_BF51x) +#define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL +#define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL +#define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CTL +#define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CTL +#define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT +#define bfin_write_SDH_COMMAND bfin_write_RSI_COMMAND +#define bfin_write_SDH_DATA_TIMER bfin_write_RSI_DATA_TIMER +#define bfin_read_SDH_RESPONSE0 bfin_read_RSI_RESPONSE0 +#define bfin_read_SDH_RESPONSE1 bfin_read_RSI_RESPONSE1 +#define bfin_read_SDH_RESPONSE2 bfin_read_RSI_RESPONSE2 +#define bfin_read_SDH_RESPONSE3 bfin_read_RSI_RESPONSE3 +#define bfin_write_SDH_DATA_LGTH bfin_write_RSI_DATA_LGTH +#define bfin_read_SDH_DATA_CTL bfin_read_RSI_DATA_CTL +#define bfin_write_SDH_DATA_CTL bfin_write_RSI_DATA_CTL +#define bfin_read_SDH_DATA_CNT bfin_read_RSI_DATA_CNT +#define bfin_write_SDH_STATUS_CLR bfin_write_RSI_STATUS_CLR +#define bfin_read_SDH_E_STATUS bfin_read_RSI_E_STATUS +#define bfin_write_SDH_E_STATUS bfin_write_RSI_E_STATUS +#define bfin_read_SDH_STATUS bfin_read_RSI_STATUS +#define bfin_write_SDH_MASK0 bfin_write_RSI_MASK0 +#define bfin_read_SDH_CFG bfin_read_RSI_CFG +#define bfin_write_SDH_CFG bfin_write_RSI_CFG +#endif + +struct dma_desc_array { + unsigned long start_addr; + unsigned short cfg; + unsigned short x_count; + short x_modify; +} __packed; + +struct sdh_host { + struct mmc_host *mmc; + spinlock_t lock; + struct resource *res; + void __iomem *base; + int irq; + int stat_irq; + int dma_ch; + int dma_dir; + struct dma_desc_array *sg_cpu; + dma_addr_t sg_dma; + int dma_len; + + unsigned int imask; + unsigned int power_mode; + unsigned int clk_div; + + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; +}; + +static struct bfin_sd_host *get_sdh_data(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} + +static void sdh_stop_clock(struct sdh_host *host) +{ + bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() & ~CLK_E); + SSYNC(); +} + +static void sdh_enable_stat_irq(struct sdh_host *host, unsigned int mask) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->imask |= mask; + bfin_write_SDH_MASK0(mask); + SSYNC(); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void sdh_disable_stat_irq(struct sdh_host *host, unsigned int mask) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->imask &= ~mask; + bfin_write_SDH_MASK0(host->imask); + SSYNC(); + spin_unlock_irqrestore(&host->lock, flags); +} + +static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data) +{ + unsigned int length; + unsigned int data_ctl; + unsigned int dma_cfg; + struct scatterlist *sg; + + dev_dbg(mmc_dev(host->mmc), "%s enter flags: 0x%x\n", __func__, data->flags); + host->data = data; + data_ctl = 0; + dma_cfg = 0; + + length = data->blksz * data->blocks; + bfin_write_SDH_DATA_LGTH(length); + + if (data->flags & MMC_DATA_STREAM) + data_ctl |= DTX_MODE; + + if (data->flags & MMC_DATA_READ) + data_ctl |= DTX_DIR; + /* Only supports power-of-2 block size */ + if (data->blksz & (data->blksz - 1)) + return -EINVAL; + data_ctl |= ((ffs(data->blksz) - 1) << 4); + + bfin_write_SDH_DATA_CTL(data_ctl); + + bfin_write_SDH_DATA_TIMER(0xFFFF); + SSYNC(); + + if (data->flags & MMC_DATA_READ) { + host->dma_dir = DMA_FROM_DEVICE; + dma_cfg |= WNR; + } else + host->dma_dir = DMA_TO_DEVICE; + + sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END)); + host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); +#if defined(CONFIG_BF54x) + dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN; + { + int i; + for_each_sg(data->sg, sg, host->dma_len, i) { + host->sg_cpu[i].start_addr = sg_dma_address(sg); + host->sg_cpu[i].cfg = dma_cfg; + host->sg_cpu[i].x_count = sg_dma_len(sg) / 4; + host->sg_cpu[i].x_modify = 4; + dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, " + "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n", + i, host->sg_cpu[i].start_addr, + host->sg_cpu[i].cfg, host->sg_cpu[i].x_count, + host->sg_cpu[i].x_modify); + } + } + flush_dcache_range((unsigned int)host->sg_cpu, + (unsigned int)host->sg_cpu + + host->dma_len * sizeof(struct dma_desc_array)); + /* Set the last descriptor to stop mode */ + host->sg_cpu[host->dma_len - 1].cfg &= ~(DMAFLOW | NDSIZE); + host->sg_cpu[host->dma_len - 1].cfg |= DI_EN; + + set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma); + set_dma_x_count(host->dma_ch, 0); + set_dma_x_modify(host->dma_ch, 0); + set_dma_config(host->dma_ch, dma_cfg); +#elif defined(CONFIG_BF51x) + /* RSI DMA doesn't work in array mode */ + dma_cfg |= WDSIZE_32 | DMAEN; + set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0])); + set_dma_x_count(host->dma_ch, length / 4); + set_dma_x_modify(host->dma_ch, 4); + set_dma_config(host->dma_ch, dma_cfg); +#endif + bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E); + + SSYNC(); + + dev_dbg(mmc_dev(host->mmc), "%s exit\n", __func__); + return 0; +} + +static void sdh_start_cmd(struct sdh_host *host, struct mmc_command *cmd) +{ + unsigned int sdh_cmd; + unsigned int stat_mask; + + dev_dbg(mmc_dev(host->mmc), "%s enter cmd: 0x%p\n", __func__, cmd); + WARN_ON(host->cmd != NULL); + host->cmd = cmd; + + sdh_cmd = 0; + stat_mask = 0; + + sdh_cmd |= cmd->opcode; + + if (cmd->flags & MMC_RSP_PRESENT) { + sdh_cmd |= CMD_RSP; + stat_mask |= CMD_RESP_END; |