diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/mmc/card/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/mmc/card/block.c | 58 | ||||
| -rw-r--r-- | drivers/mmc/card/queue.c | 24 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc_ops.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 52 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_irq.c | 16 | ||||
| -rw-r--r-- | drivers/mmc/host/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/mmc/host/atmel-mci-regs.h | 6 | ||||
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 1352 | ||||
| -rw-r--r-- | drivers/mmc/host/mmc_spi.c | 32 | ||||
| -rw-r--r-- | drivers/mmc/host/omap.c | 11 | ||||
| -rw-r--r-- | drivers/mmc/host/pxamci.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/host/s3cmci.c | 210 | ||||
| -rw-r--r-- | drivers/mmc/host/s3cmci.h | 6 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 46 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.h | 2 |
18 files changed, 1337 insertions, 537 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index c0b41e8bcd9..f2eeb38efa6 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -3,13 +3,14 @@ # menuconfig MMC - tristate "MMC/SD card support" + tristate "MMC/SD/SDIO card support" depends on HAS_IOMEM help - MMC is the "multi-media card" bus protocol. + This selects MultiMediaCard, Secure Digital and Secure + Digital I/O support. - If you want MMC support, you should say Y here and also - to the specific driver for your MMC interface. + If you want MMC/SD/SDIO support, you should say Y here and + also to your specific host controller driver. config MMC_DEBUG bool "MMC debugging" diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index dd0f398ee2f..3f2a912659a 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -2,7 +2,7 @@ # MMC/SD card drivers # -comment "MMC/SD Card Drivers" +comment "MMC/SD/SDIO Card Drivers" config MMC_BLOCK tristate "MMC block device driver" @@ -34,7 +34,6 @@ config MMC_BLOCK_BOUNCE config SDIO_UART tristate "SDIO UART/GPS class support" - depends on MMC help SDIO function driver for SDIO cards that implements the UART class, as well as the GPS class which appears like a UART. diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index ebc8b9d7761..24c97d3d16b 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -29,6 +29,7 @@ #include <linux/blkdev.h> #include <linux/mutex.h> #include <linux/scatterlist.h> +#include <linux/string_helpers.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -57,7 +58,6 @@ struct mmc_blk_data { struct mmc_queue queue; unsigned int usage; - unsigned int block_bits; unsigned int read_only; }; @@ -83,7 +83,7 @@ static void mmc_blk_put(struct mmc_blk_data *md) mutex_lock(&open_lock); md->usage--; if (md->usage == 0) { - int devidx = md->disk->first_minor >> MMC_SHIFT; + int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT; __clear_bit(devidx, dev_use); put_disk(md->disk); @@ -215,8 +215,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret = 1, data_size, i; - struct scatterlist *sg; + int ret = 1; mmc_claim_host(card->host); @@ -232,13 +231,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) if (!mmc_card_blockaddr(card)) brq.cmd.arg <<= 9; brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - brq.data.blksz = 1 << md->block_bits; + brq.data.blksz = 512; brq.stop.opcode = MMC_STOP_TRANSMISSION; brq.stop.arg = 0; brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); - if (brq.data.blocks > card->host->max_blk_count) - brq.data.blocks = card->host->max_blk_count; + brq.data.blocks = req->nr_sectors; if (brq.data.blocks > 1) { /* SPI multiblock writes terminate using a special @@ -270,24 +267,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_pre(mq); - /* - * Adjust the sg list so it is the same size as the - * request. - */ - if (brq.data.blocks != - (req->nr_sectors >> (md->block_bits - 9))) { - data_size = brq.data.blocks * brq.data.blksz; - for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { - data_size -= sg->length; - if (data_size <= 0) { - sg->length += data_size; - i++; - break; - } - } - brq.data.sg_len = i; - } - mmc_wait_for_req(card->host, &brq.mrq); mmc_queue_bounce_post(mq); @@ -372,16 +351,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) if (rq_data_dir(req) != READ) { if (mmc_card_sd(card)) { u32 blocks; - unsigned int bytes; blocks = mmc_sd_num_wr_blocks(card); if (blocks != (u32)-1) { - if (card->csd.write_partial) - bytes = blocks << md->block_bits; - else - bytes = blocks << 9; spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, bytes); + ret = __blk_end_request(req, 0, blocks << 9); spin_unlock_irq(&md->lock); } } else { @@ -431,13 +405,6 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) */ md->read_only = mmc_blk_readonly(card); - /* - * Both SD and MMC specifications state (although a bit - * unclearly in the MMC case) that a block size of 512 - * bytes must always be supported by the card. - */ - md->block_bits = 9; - md->disk = alloc_disk(1 << MMC_SHIFT); if (md->disk == NULL) { ret = -ENOMEM; @@ -475,7 +442,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) sprintf(md->disk->disk_name, "mmcblk%d", devidx); - blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); + blk_queue_hardsect_size(md->queue.queue, 512); if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { /* @@ -513,7 +480,7 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) mmc_claim_host(card->host); cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = 1 << md->block_bits; + cmd.arg = 512; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, 5); mmc_release_host(card->host); @@ -532,6 +499,8 @@ static int mmc_blk_probe(struct mmc_card *card) struct mmc_blk_data *md; int err; + char cap_str[10]; + /* * Check that the card supports the command class(es) we need. */ @@ -546,10 +515,11 @@ static int mmc_blk_probe(struct mmc_card *card) if (err) goto out; - printk(KERN_INFO "%s: %s %s %lluKiB %s\n", + string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2, + cap_str, sizeof(cap_str)); + printk(KERN_INFO "%s: %s %s %s %s\n", md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), - (unsigned long long)(get_capacity(md->disk) >> 1), - md->read_only ? "(ro)" : ""); + cap_str, md->read_only ? "(ro)" : ""); mmc_set_drvdata(card, md); add_disk(md->disk); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 3dee97e7d16..7a72e75d5c6 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -31,7 +31,7 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) /* * We only like normal block requests. */ - if (!blk_fs_request(req) && !blk_pc_request(req)) { + if (!blk_fs_request(req)) { blk_dump_rq_flags(req, "MMC bad request"); return BLKPREP_KILL; } @@ -131,6 +131,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock mq->req = NULL; blk_queue_prep_rq(mq->queue, mmc_prep_request); + blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN, NULL); + queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue); #ifdef CONFIG_MMC_BLOCK_BOUNCE if (host->max_hw_segs == 1) { @@ -142,12 +144,19 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock bouncesz = host->max_req_size; if (bouncesz > host->max_seg_size) bouncesz = host->max_seg_size; + if (bouncesz > (host->max_blk_count * 512)) + bouncesz = host->max_blk_count * 512; + + if (bouncesz > 512) { + mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); + if (!mq->bounce_buf) { + printk(KERN_WARNING "%s: unable to " + "allocate bounce buffer\n", + mmc_card_name(card)); + } + } - mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); - if (!mq->bounce_buf) { - printk(KERN_WARNING "%s: unable to allocate " - "bounce buffer\n", mmc_card_name(card)); - } else { + if (mq->bounce_buf) { blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY); blk_queue_max_sectors(mq->queue, bouncesz / 512); blk_queue_max_phys_segments(mq->queue, bouncesz / 512); @@ -175,7 +184,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock if (!mq->bounce_buf) { blk_queue_bounce_limit(mq->queue, limit); - blk_queue_max_sectors(mq->queue, host->max_req_size / 512); + blk_queue_max_sectors(mq->queue, + min(host->max_blk_count, host->max_req_size / 512)); blk_queue_max_phys_segments(mq->queue, host->max_phys_segs); blk_queue_max_hw_segments(mq->queue, host->max_hw_segs); blk_queue_max_segment_size(mq->queue, host->max_seg_size); diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 64b05c6270f..9c50e6f1c23 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -248,8 +248,12 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, sg_init_one(&sg, data_buf, len); - if (card) - mmc_set_data_timeout(&data, card); + /* + * The spec states that CSR and CID accesses have a timeout + * of 64 clock cycles. + */ + data.timeout_ns = 0; + data.timeout_clks = 64; mmc_wait_for_req(host, &mrq); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 4eab79e09cc..fb99ccff908 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -165,6 +165,36 @@ static int sdio_enable_wide(struct mmc_card *card) } /* + * Test if the card supports high-speed mode and, if so, switch to it. + */ +static int sdio_enable_hs(struct mmc_card *card) +{ + int ret; + u8 speed; + + if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED)) + return 0; + + if (!card->cccr.high_speed) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (ret) + return ret; + + speed |= SDIO_SPEED_EHS; + + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); + if (ret) + return ret; + + mmc_card_set_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + + return 0; +} + +/* * Host is being removed. Free up the current card. */ static void mmc_sdio_remove(struct mmc_host *host) @@ -333,10 +363,26 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* - * No support for high-speed yet, so just set - * the card's maximum speed. + * Switch to high-speed (if supported). */ - mmc_set_clock(host, card->cis.max_dtr); + err = sdio_enable_hs(card); + if (err) + goto remove; + + /* + * Change to the card's maximum speed. + */ + if (mmc_card_highspeed(card)) { + /* + * The SDIO specification doesn't mention how + * the CIS transfer speed register relates to + * high-speed, but it seems that 50 MHz is + * mandatory. + */ + mmc_set_clock(host, 50000000); + } else { + mmc_set_clock(host, card->cis.max_dtr); + } /* * Switch to wider bus (if supported). diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index c292e124107..bb192f90e8e 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -5,6 +5,8 @@ * Created: June 18, 2007 * Copyright: MontaVista Software Inc. * + * Copyright 2008 Pierre Ossman + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at @@ -107,11 +109,14 @@ static int sdio_irq_thread(void *_host) /* * Give other threads a chance to run in the presence of - * errors. FIXME: determine if due to card removal and - * possibly exit this thread if so. + * errors. */ - if (ret < 0) - ssleep(1); + if (ret < 0) { + set_current_state(TASK_INTERRUPTIBLE); + if (!kthread_should_stop()) + schedule_timeout(HZ); + set_current_state(TASK_RUNNING); + } /* * Adaptive polling frequency based on the assumption @@ -154,7 +159,8 @@ static int sdio_card_irq_get(struct mmc_card *card) if (!host->sdio_irqs++) { atomic_set(&host->sdio_irq_thread_abort, 0); host->sdio_irq_thread = - kthread_run(sdio_irq_thread, host, "ksdiorqd"); + kthread_run(sdio_irq_thread, host, "ksdioirqd/%s", + mmc_hostname(host)); if (IS_ERR(host->sdio_irq_thread)) { int err = PTR_ERR(host->sdio_irq_thread); host->sdio_irqs--; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index ea8d7a3490d..dfa585f7fea 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -2,7 +2,7 @@ # MMC/SD host controller drivers # -comment "MMC/SD Host Controller Drivers" +comment "MMC/SD/SDIO Host Controller Drivers" config MMC_ARMMMCI tristate "ARM AMBA Multimedia Card Interface support" @@ -114,6 +114,17 @@ config MMC_ATMELMCI If unsure, say N. +config MMC_ATMELMCI_DMA + bool "Atmel MCI DMA support (EXPERIMENTAL)" + depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL + help + Say Y here to have the Atmel MCI driver use a DMA engine to + do data transfers and thus increase the throughput and + reduce the CPU utilization. Note that this is highly + experimental and may cause the driver to lock up. + + If unsure, say N. + config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" depends on ARCH_IMX @@ -141,21 +152,22 @@ config MMC_TIFM_SD module will be called tifm_sd. config MMC_SPI - tristate "MMC/SD over SPI" - depends on MMC && SPI_MASTER && !HIGHMEM && HAS_DMA + tristate "MMC/SD/SDIO over SPI" + depends on SPI_MASTER && !HIGHMEM && HAS_DMA select CRC7 select CRC_ITU_T help - Some systems accss MMC/SD cards using a SPI controller instead of - using a "native" MMC/SD controller. This has a disadvantage of - being relatively high overhead, but a compensating advantage of - working on many systems without dedicated MMC/SD controllers. + Some systems accss MMC/SD/SDIO cards using a SPI controller + instead of using a "native" MMC/SD/SDIO controller. This has a + disadvantage of being relatively high overhead, but a compensating + advantage of working on many systems without dedicated MMC/SD/SDIO + controllers. If unsure, or if your system has no SPI master driver, say N. config MMC_S3C tristate "Samsung S3C SD/MMC Card Interface support" - depends on ARCH_S3C2410 && MMC + depends on ARCH_S3C2410 help This selects a driver for the MCI interface found in Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. @@ -166,7 +178,7 @@ config MMC_S3C config MMC_SDRICOH_CS tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" - depends on EXPERIMENTAL && MMC && PCI && PCMCIA + depends on EXPERIMENTAL && PCI && PCMCIA help Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA card whenever you insert a MMC or SD card into the card slot. diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index 26bd80e6503..b58364ed6bb 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -25,8 +25,10 @@ #define MCI_SDCR 0x000c /* SD Card / SDIO */ # define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ # define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ -# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */ -# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */ +# define MCI_SDCSEL_MASK ( 3 << 0) +# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ +# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ +# define MCI_SDCBUS_MASK ( 3 << 6) #define MCI_ARGR 0x0010 /* Command Argument */ #define MCI_CMDR 0x0014 /* Command */ # define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 00008967ef7..7a3f2436b01 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -11,6 +11,8 @@ #include <linux/clk.h> #include <linux/debugfs.h> #include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> @@ -33,64 +35,178 @@ #include "atmel-mci-regs.h" #define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) +#define ATMCI_DMA_THRESHOLD 16 enum { EVENT_CMD_COMPLETE = 0, - EVENT_DATA_ERROR, - EVENT_DATA_COMPLETE, - EVENT_STOP_SENT, - EVENT_STOP_COMPLETE, EVENT_XFER_COMPLETE, + EVENT_DATA_COMPLETE, + EVENT_DATA_ERROR, +}; + +enum atmel_mci_state { + STATE_IDLE = 0, + STATE_SENDING_CMD, + STATE_SENDING_DATA, + STATE_DATA_BUSY, + STATE_SENDING_STOP, + STATE_DATA_ERROR, +}; + +struct atmel_mci_dma { +#ifdef CONFIG_MMC_ATMELMCI_DMA + struct dma_client client; + struct dma_chan *chan; + struct dma_async_tx_descriptor *data_desc; +#endif }; +/** + * struct atmel_mci - MMC controller state shared between all slots + * @lock: Spinlock protecting the queue and associated data. + * @regs: Pointer to MMIO registers. + * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @pio_offset: Offset into the current scatterlist entry. + * @cur_slot: The slot which is currently using the controller. + * @mrq: The request currently being processed on @cur_slot, + * or NULL if the controller is idle. + * @cmd: The command currently being sent to the card, or NULL. + * @data: The data currently being transferred, or NULL if no data + * transfer is in progress. + * @dma: DMA client state. + * @data_chan: DMA channel being used for the current data transfer. + * @cmd_status: Snapshot of SR taken upon completion of the current + * command. Only valid when EVENT_CMD_COMPLETE is pending. + * @data_status: Snapshot of SR taken upon completion of the current + * data transfer. Only valid when EVENT_DATA_COMPLETE or + * EVENT_DATA_ERROR is pending. + * @stop_cmdr: Value to be loaded into CMDR when the stop command is + * to be sent. + * @tasklet: Tasklet running the request state machine. + * @pending_events: Bitmask of events flagged by the interrupt handler + * to be processed by the tasklet. + * @completed_events: Bitmask of events which the state machine has + * processed. + * @state: Tasklet state. + * @queue: List of slots waiting for access to the controller. + * @need_clock_update: Update the clock rate before the next request. + * @need_reset: Reset controller before next request. + * @mode_reg: Value of the MR register. + * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus + * rate and timeout calculations. + * @mapbase: Physical address of the MMIO registers. + * @mck: The peripheral bus clock hooked up to the MMC controller. + * @pdev: Platform device associated with the MMC controller. + * @slot: Slots sharing this MMC controller. + * + * Locking + * ======= + * + * @lock is a softirq-safe spinlock protecting @queue as well as + * @cur_slot, @mrq and @state. These must always be updated + * at the same time while holding @lock. + * + * @lock also protects mode_reg and need_clock_update since these are + * used to synchronize mode register updates with the queue + * processing. + * + * The @mrq field of struct atmel_mci_slot is also protected by @lock, + * and must always be written at the same time as the slot is added to + * @queue. + * + * @pending_events and @completed_events are accessed using atomic bit + * operations, so they don't need any locking. + * + * None of the fields touched by the interrupt handler need any + * locking. However, ordering is important: Before EVENT_DATA_ERROR or + * EVENT_DATA_COMPLETE is set in @pending_events, all data-related + * interrupts must be disabled and @data_status updated with a + * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the + * CMDRDY interupt must be disabled and @cmd_status updated with a + * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the + * bytes_xfered field of @data must be written. This is ensured by + * using barriers. + */ struct atmel_mci { - struct mmc_host *mmc; + spinlock_t lock; void __iomem *regs; struct scatterlist *sg; unsigned int pio_offset; + struct atmel_mci_slot *cur_slot; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; + struct atmel_mci_dma dma; + struct dma_chan *data_chan; + u32 cmd_status; u32 data_status; - u32 stop_status; u32 stop_cmdr; - u32 mode_reg; - u32 sdc_reg; - struct tasklet_struct tasklet; unsigned long pending_events; unsigned long completed_events; + enum atmel_mci_state state; + struct list_head queue; - int present; - int detect_pin; - int wp_pin; - - /* For detect pin debouncing */ - struct timer_list detect_timer; - + bool need_clock_update; + bool need_reset; + u32 mode_reg; unsigned long bus_hz; unsigned long mapbase; struct clk *mck; struct platform_device *pdev; + + struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS]; +}; + +/** + * struct atmel_mci_slot - MMC slot state + * @mmc: The mmc_host representing this slot. + * @host: The MMC controller this slot is using. + * @sdc_reg: Value of SDCR to be written before using this slot. + * @mrq: mmc_request currently being processed or waiting to be + * processed, or NULL when the slot is idle. + * @queue_node: List node for placing this node in the @queue list of + * &struct atmel_mci. + * @clock: Clock rate configured by set_ios(). Protected by host->lock. + * @flags: Random state bits associated with the slot. + * @detect_pin: GPIO pin used for card detection, or negative if not + * available. + * @wp_pin: GPIO pin used for card write protect sending, or negative + * if not available. + * @detect_timer: Timer used for debouncing @detect_pin interrupts. + */ +struct atmel_mci_slot { + struct mmc_host *mmc; + struct atmel_mci *host; + + u32 sdc_reg; + + struct mmc_request *mrq; + struct list_head queue_node; + + unsigned int clock; + unsigned long flags; +#define ATMCI_CARD_PRESENT 0 +#define ATMCI_CARD_NEED_INIT 1 +#define ATMCI_SHUTDOWN 2 + + int detect_pin; + int wp_pin; + + struct timer_list detect_timer; }; -#define atmci_is_completed(host, event) \ - test_bit(event, &host->completed_events) #define atmci_test_and_clear_pending(host, event) \ test_and_clear_bit(event, &host->pending_events) -#define atmci_test_and_set_completed(host, event) \ - test_and_set_bit(event, &host->completed_events) #define atmci_set_completed(host, event) \ set_bit(event, &host->completed_events) #define atmci_set_pending(host, event) \ set_bit(event, &host->pending_events) -#define atmci_clear_pending(host, event) \ - clear_bit(event, &host->pending_events) /* * The debugfs stuff below is mostly optimized away when @@ -98,14 +214,15 @@ struct atmel_mci { */ static int atmci_req_show(struct seq_file *s, void *v) { - struct atmel_mci *host = s->private; - struct mmc_request *mrq = host->mrq; + struct atmel_mci_slot *slot = s->private; + struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_command *stop; struct mmc_data *data; /* Make sure we get a consistent snapshot */ - spin_lock_irq(&host->mmc->lock); + spin_lock_bh(&slot->host->lock); + mrq = slot->mrq; if (mrq) { cmd = mrq->cmd; @@ -130,7 +247,7 @@ static int atmci_req_show(struct seq_file *s, void *v) stop->resp[2], stop->error); } - spin_unlock_irq(&host->mmc->lock); + spin_unlock_bh(&slot->host->lock); return 0; } @@ -193,12 +310,16 @@ static int atmci_regs_show(struct seq_file *s, void *v) if (!buf) return -ENOMEM; - /* Grab a more or less consistent snapshot */ - spin_lock_irq(&host->mmc->lock); + /* + * Grab a more or less consistent snapshot. Note that we're + * not disabling interrupts, so IMR and SR may not be + * consistent. + */ + spin_lock_bh(&host->lock); clk_enable(host->mck); memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); clk_disable(host->mck); - spin_unlock_irq(&host->mmc->lock); + spin_unlock_bh(&host->lock); seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", buf[MCI_MR / 4], @@ -236,13 +357,13 @@ static const struct file_operations atmci_regs_fops = { .release = single_release, }; -static void atmci_init_debugfs(struct atmel_mci *host) +static void atmci_init_debugfs(struct atmel_mci_slot *slot) { - struct mmc_host *mmc; - struct dentry *root; - struct dentry *node; + struct mmc_host *mmc = slot->mmc; + struct atmel_mci *host = slot->host; + struct dentry *root; + struct dentry *node; - mmc = host->mmc; root = mmc->debugfs_root; if (!root) return; @@ -254,7 +375,11 @@ static void atmci_init_debugfs(struct atmel_mci *host) if (!node) goto err; - node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops); + node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); + if (!node) + goto err; + + node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); if (!node) goto err; @@ -271,25 +396,7 @@ static void atmci_init_debugfs(struct atmel_mci *host) return; err: - dev_err(&host->pdev->dev, - "failed to initialize debugfs for controller\n"); -} - -static void atmci_enable(struct atmel_mci *host) -{ - clk_enable(host->mck); - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - mci_writel(host, SDCR, host->sdc_reg); -} - -static void atmci_disable(struct atmel_mci *host) -{ - mci_writel(host, CR, MCI_CR_SWRST); - - /* Stall until write is complete, then disable the bus clock */ - mci_readl(host, SR); - clk_disable(host->mck); + dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } static inline unsigned int ns_to_clocks(struct atmel_mci *host, @@ -299,7 +406,7 @@ static inline unsigned int ns_to_clocks(struct atmel_mci *host, } static void atmci_set_timeout(struct atmel_mci *host, - struct mmc_data *data) + struct atmel_mci_slot *slot, struct mmc_data *data) { static unsigned dtomul_to_shift[] = { 0, 4, 7, 8, 10, 12, 16, 20 @@ -322,7 +429,7 @@ static void atmci_set_timeout(struct atmel_mci *host, dtocyc = 15; } - dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", + dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", dtocyc << dtomul_to_shift[dtomul]); mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); } @@ -375,15 +482,12 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, } static void atmci_start_command(struct atmel_mci *host, - struct mmc_command *cmd, - u32 cmd_flags) + struct mmc_command *cmd, u32 cmd_flags) { - /* Must read host->cmd after testing event flags */ - smp_rmb(); WARN_ON(host->cmd); host->cmd = cmd; - dev_vdbg(&host->mmc->class_dev, + dev_vdbg(&host->pdev->dev, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); @@ -391,34 +495,157 @@ static void atmci_start_command(struct atmel_mci *host, mci_writel(host, CMDR, cmd_flags); } -static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data) +static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) { - struct atmel_mci *host = mmc_priv(mmc); - atmci_start_command(host, data->stop, host->stop_cmdr); mci_writel(host, IER, MCI_CMDRDY); } -static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) +#ifdef CONFIG_MMC_ATMELMCI_DMA +static void atmci_dma_cleanup(struct atmel_mci *host) { - struct atmel_mci *host = mmc_priv(mmc); + struct mmc_data *data = host->data; - WARN_ON(host->cmd || host->data); - host->mrq = NULL; + dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); +} + +static void atmci_stop_dma(struct atmel_mci *host) +{ + struct dma_chan *chan = host->data_chan; + + if (chan) { + chan->device->device_terminate_all(chan); + atmci_dma_cleanup(host); + } else { + /* Data transfer was stopped by the interrupt handler */ + atmci_set_pending(host, EVENT_XFER_COMPLETE); + mci_writel(host, IER, MCI_NOTBUSY); + } +} + +/* This function is called by the DMA driver from tasklet context. */ +static void atmci_dma_complete(void *arg) +{ + struct atmel_mci *host = arg; + struct mmc_data *data = host->data; + + dev_vdbg(&host->pdev->dev, "DMA complete\n"); + + atmci_dma_cleanup(host); + + /* + * If the card was removed, data will be NULL. No point trying + * to send the stop command or waiting for NBUSY in this case. + */ + if (data) { + atmci_set_pending(host, EVENT_XFER_COMPLETE); + tasklet_schedule(&host->tasklet); + + /* + * Regardless of what the documentation says, we have + * to wait for NOTBUSY even after block read + * operations. + * + * When the DMA transfer is complete, the controller + * may still be reading the CRC from the card, i.e. + * the data transfer is still in progress and we + * haven't seen all the potential error bits yet. + * + * The interrupt handler will schedule a different + * tasklet to finish things up when the data transfer + * is completely done. + * + * We may not complete the mmc request here anyway + * because the mmc layer may call back and cause us to + * violate the "don't submit new operations from the + * completion callback" rule of the dma engine + * framework. + */ + mci_writel(host, IER, MCI_NOTBUSY); + } +} + +static int +atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) +{ + struct dma_chan *chan; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg; + unsigned int i; + enum dma_data_direction direction; + + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-word-aligned buffers or lengths. Also, we don't bother + * with all the DMA setup overhead for short transfers. + */ + if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) + return -EINVAL; + if (data->blksz & 3) + return -EINVAL; + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) + return -EINVAL; + } + + /* If we don't have a channel, we can't do DMA */ + chan = host->dma.chan; + if (chan) { + dma_chan_get(chan); + host->data_chan = chan; + } + + if (!chan) + return -ENODEV; + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + desc = chan->device->device_prep_slave_sg(chan, + data->sg, data->sg_len, direction, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -ENOMEM; - atmci_disable(host); + host->dma.data_desc = desc; + desc->callback = atmci_dma_complete; + desc->callback_param = host; + desc->tx_submit(desc); - mmc_request_done(mmc, mrq); + /* Go! */ + chan->device->device_issue_pending(chan); + + return 0; +} + +#else /* CONFIG_MMC_ATMELMCI_DMA */ + +static int atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) +{ + return -ENOSYS; } +static void atmci_stop_dma(struct atmel_mci *host) +{ + /* Data transfer was stopped by the interrupt handler */ + atmci_set_pending(host, EVENT_XFER_COMPLETE); + mci_writel(host, IER, MCI_NOTBUSY); +} + +#endif /* CONFIG_MMC_ATMELMCI_DMA */ + /* * Returns a mask of interrupt flags to be enabled after the whole * request has been prepared. */ -static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) +static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) { - struct atmel_mci *host = mmc_priv(mmc); - u32 iflags; + u32 iflags; data->error = -EINPROGRESS; @@ -426,77 +653,89 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) host->sg = NULL; host->data = data; - dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", - MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); - iflags = ATMCI_DATA_ERROR_FLAGS; - host->sg = data->sg; - host->pio_offset = 0; - if (data->flags & MMC_DATA_READ) - iflags |= MCI_RXRDY; - else - iflags |= MCI_TXRDY; + if (atmci_submit_data_dma(host, data)) { + host->data_chan = NULL; + + /* + * Errata: MMC data write operation with less than 12 + * bytes is impossible. + * + * Errata: MCI Transmit Data Register (TDR) FIFO + * corruption when length is not multiple of 4. + */ + if (data->blocks * data->blksz < 12 + || (data->blocks * data->blksz) & 3) + host->need_reset = true; + + host->sg = data->sg; + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + iflags |= MCI_RXRDY; + else + iflags |= MCI_TXRDY; + } return iflags; } -static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +static void atmci_start_request(struct atmel_mci *host, + struct atmel_mci_slot *slot) { - struct atmel_mci *host = mmc_priv(mmc); - struct mmc_data *data; + struct mmc_request *mrq; struct mmc_command *cmd; + struct mmc_data *data; u32 iflags; - u32 cmdflags = 0; - - iflags = mci_readl(host, IMR); - if (iflags) - dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", - mci_readl(host, IMR)); - - WARN_ON(host->mrq != NULL); - - /* - * We may "know" the card is gone even though there's still an - * electrical connection. If so, we really need to communicate - * this to the MMC core since there won't be any more - * interrupts as the card is completely removed. Otherwise, - * the MMC core might believe the card is still there even - * though the card was just removed very slowly. - */ - if (!host->present) { - mrq->cmd->error = -ENOMEDIUM; - mmc_request_done(mmc, mrq); - return; - } + u32 cmdflags; + mrq = slot->mrq; + host->cur_slot = slot; host->mrq = mrq; + host->pending_events = 0; host->completed_events = 0; + host->data_status = 0; - atmci_enable(host); + if (host->need_reset) { + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); + host->need_reset = false; + } + mci_writel(host, SDCR, slot->sdc_reg); - /* We don't support multiple blocks of weird lengths. */ + iflags = mci_readl(host, IMR); + if (iflags) + dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", + iflags); + + if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { + /* Send init sequence (74 clock cycles) */ + mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); + while (!(mci_readl(host, SR) & MCI_CMDRDY)) + cpu_relax(); + } data = mrq->data; if (data) { - if (data->blocks > 1 && data->blksz & 3) - goto fail; - atmci_set_timeout(host, data); + atmci_set_timeout(host, slot, data); /* Must set block count/size before sending command */ mci_writel(host, BLKR, MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", + MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); } iflags = MCI_CMDRDY; cmd = mrq->cmd; - cmdflags = atmci_prepare_command(mmc, cmd); + cmdflags = atmci_prepare_command(slot->mmc, cmd); atmci_start_command(host, cmd, cmdflags); if (data) - iflags |= atmci_submit_data(mmc, data); + iflags |= atmci_submit_data(host, data); if (mrq->stop) { - host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); + host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); host->stop_cmdr |= MCI_CMDR_STOP_XFER; if (!(data->flags & MMC_DATA_WRITE)) host->stop_cmdr |= MCI_CMDR_TRDIR_READ; @@ -513,59 +752,156 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) * prepared yet.) */ mci_writel(host, IER, iflags); +} - return; +static void atmci_queue_request(struct atmel_mci *host, + struct atmel_mci_slot *slot, struct mmc_request *mrq) +{ + dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", + host->state); + + spin_lock_bh(&host->lock); + slot->mrq = mrq; + if (host->state == STATE_IDLE) { + host->state = STATE_SENDING_CMD; + atmci_start_request(host, slot); + } else { + list_add_tail(&slot->queue_node, &host->queue); + } + spin_unlock_bh(&host->lock); +} -fail: - atmci_disable(host); - host->mrq = NULL; - mrq->cmd->error = -EINVAL; - mmc_request_done(mmc, mrq); +static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct atmel_mci_slot *slot = mmc_priv(mmc); + struct atmel_mci *host = slot->host; + struct mmc_data *data; + + WARN_ON(slot->mrq); + + /* + * We may "know" the card is gone even though there's still an + * electrical connection. If so, we really need to communicate + * this to the MMC core since there won't be any more + * interrupts as the card is completely removed. Otherwise, + * the MMC core might believe the card is still there even + * though the card was just removed very slowly. + */ + if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) { + mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + /* We don't support multiple blocks of weird lengths. */ + data = mrq->data; + if (data && data->blocks > 1 && data->blksz & 3) { + mrq->cmd->error = -EINVAL; + mmc_request_done(mmc, mrq); + } + + atmci_queue_request(host, slot, mrq); } static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci_slot *slot = mmc_priv(mmc); + struct atmel_mci *host = slot->host; + unsigned int i; + + slot->sdc_reg &= ~MCI_SDCBUS_MASK; + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + slot->sdc_reg |= MCI_SDCBUS_1BIT; + break; + case MMC_BUS_WIDTH_4: + slot->sdc_reg = MCI_SDCBUS_4BIT; + break; + } if (ios->clock) { + unsigned int clock_min = ~0U; u32 clkdiv; - /* Set clock rate */ - clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; + spin_lock_bh(&host->lock); + if (!host->mode_reg) { + clk_enable(host->mck); + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, CR, MCI_CR_MCIEN); + } + + /* + * Use mirror of ios->clock to prevent race with mmc + * core ios update when finding the minimum. + */ + slot->clock = ios->clock; + for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + if (host->slot[i] && host->slot[i]->clock + && host->slot[i]->clock < clock_min) + clock_min = host->slot[i]->clock; + } + + /* Calculate clock divider */ + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; if (clkdiv > 255) { dev_warn(&mmc->class_dev, "clock %u too slow; using %lu\n", - ios->clock, host->bus_hz / (2 * 256)); + clock_min, host->bus_hz / (2 * 256)); clkdiv = 255; } + /* + * WRPROOF and RDPROOF prevent overruns/underruns by + * stopping the clock when the FIFO is full/empty. + * This state is not expected to last for long. + */ host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF | MCI_MR_RDPROOF; - } - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - host->sdc_reg = 0; - break; - case MMC_BUS_WIDTH_4: - host->sdc_reg = MCI_SDCBUS_4BIT; - break; + if (list_empty(&host->queue)) + mci_writel(host, MR, host->mode_reg); + else + host->need_clock_update = true; + + spin_unlock_bh(&host->lock); + } else { + bool any_slot_active = false; + + spin_lock_bh(&host->lock); + slot->clock = 0; + for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + if (host->slot[i] && host->slot[i]->clock) { + any_slot_active = true; + break; + } + } + if (!any_slot_active) { + mci_writel(host, CR, MCI_CR_MCIDIS); + if (host->mode_reg) { + mci_readl(host, MR); + clk_disable(host->mck); + } + host->mode_reg = 0; + } + spin_unlock_bh(&host->lock); } switch (ios->power_mode) { - case MMC_POWER_ON: - /* Send init sequence (74 clock cycles) */ - atmci_enable(host); - mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); - while (!(mci_readl(host, SR) & MCI_CMDRDY)) - cpu_relax(); - atmci_disable(host); + case MMC_POWER_UP: + set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); break; default: /* * TODO: None of the currently available AVR32-based * boards allow MMC power to be turned off. Implement * power control when this can be tested properly. + * + * We also need to hook this into the clock management + * somehow so that newly inserted cards aren't + * subjected to a fast clock before we have a chance + * to figure out what the maximum rate is. Currently, + * there's no way to avoid this, and there never will + * be for boards that don't support power control. */ break; } @@ -573,31 +909,82 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) static int atmci_get_ro(struct mmc_host *mmc) { - int read_only = 0; - struct atmel_mci *host = mmc_priv(mmc); + int read_only = -ENOSYS; + struct atmel_mci_slot *slot = mmc_priv(mmc); - if (gpio_is_valid(host->wp_pin)) { - read_only = gpio_get_value(host->wp_pin); + if (gpio_is_valid(slot->wp_pin)) { + read_only = gpio_get_value(slot->wp_pin); dev_dbg(&mmc->class_dev, "card is %s\n", read_only ? "read-only" : "read-write"); - } else { - dev_dbg(&mmc->class_dev, - "no pin for checking read-only switch." - " Assuming write-enable.\n"); } return read_only; } -static struct mmc_host_ops atmci_ops = { +static int atmci_get_cd(struct mmc_host *mmc) +{ + int present = -ENOSYS; + struct atmel_mci_slot *slot = mmc_priv(mmc); + + if (gpio_is_valid(slot->detect_pin)) { + present = !gpio_get_value(slot->detect_pin); + dev_dbg(&mmc->class_dev, "card is %spresent\n", + present ? "" : "not "); + } + + return present; +} + +static const struct mmc_host_ops atmci_ops = { .request = atmci_request, .set_ios = atmci_set_ios, .get_ro = atmci_get_ro, + .get_cd = atmci_get_cd, }; +/* Called with host->lock held */ +static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) + __releases(&host->lock) + __acquires(&host->lock) +{ + struct atmel_mci_slot *slot = NULL; + struct mmc_host *prev_mmc = host->cur_slot->mmc; + + WARN_ON(host->cmd || host->data); + + /* + * Update the MMC clock rate if necessary. This may be + * necessary if set_ios() is called when a different slot is + * busy transfering data. + */ + if (host->need_clock_update) + mci_writel(host, MR, host->mode_reg); + + host->cur_slot->mrq = NULL; + host->mrq = NULL; + if (!list_empty(&host->queue)) { + slot = list_entry(host->queue.next, + struct atmel_mci_slot, queue_node); + list_del(&slot->queue_node); + dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", + mmc_hostname(slot->mmc)); + host->state = STATE_SENDING_CMD; + atmci_start_request(host, slot); + } else { + dev_vdbg(&host->pdev->dev, "list empty\n"); + host->state = STATE_IDLE; + } + + spin_unlock(&host->lock); + mmc_request_done(prev_mmc, mrq); + spin_lock(&host->lock); +} + static void atmci_command_complete(struct atmel_mci *host, - struct mmc_command *cmd, u32 status) + struct mmc_command *cmd) { + u32 status = host->cmd_status; + /* Read the response from the card (up to 16 bytes) */ cmd->resp[0] = mci_readl(host, RSPR); cmd->resp[1] = mci_readl(host, RSPR); @@ -614,11 +1001,12 @@ static void atmci_command_complete(struct atmel_mci *host, cmd->error = 0; if (cmd->error) { - dev_dbg(&host->mmc->class_dev, + dev_dbg(&host->pdev->dev, "command error: status=0x%08x\n", status); if (cmd->data) { host->data = NULL; + atmci_stop_dma(host); mci_writel(host, IDR, MCI_NOTBUSY | MCI_TXRDY | MCI_RXRDY | ATMCI_DATA_ERROR_FLAGS); @@ -628,146 +1016,222 @@ static void atmci_command_complete(struct atmel_mci *host, static void atmci_detect_change(unsigned long data) { - struct atmel_mci *host = (struct atmel_mci *)data; - struct mmc_request *mrq = host->mrq; - int present; + struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data; + bool present; + bool present_old; /* - * atmci_remove() sets detect_pin to -1 before freeing the - * interrupt. We must not re-enable the interrupt if it has - * been freed. + * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before + * freeing the interrupt. We must not re-enable the interrupt + * if it has been freed, and if we're shutting down, it + * doesn't really matter whether the card is present or not. */ smp_rmb(); - if (!gpio_is_valid(host->detect_pin)) + if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) return; - enable_irq(gpio_to_irq(host->detect_pin)); - present = !gpio_get_value(host->detect_pin); + enable_irq(gpio_to_irq(slot->detect_pin)); + present = !gpio_get_value(slot->detect_pin); + present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); + + dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", + present, present_old); - dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n", - present, host->present); + if (present != present_old) { + struct atmel_mci *host = slot->host; + struct mmc_request *mrq; - if (present != host->present) { - dev_dbg(&host->mmc->class_dev, "card %s\n", + dev_dbg(&slot->mmc->class_dev, "card %s\n", present ? "inserted" : "removed"); - host->present = present; - /* Reset controller if card is gone */ - if (!present) { - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, IDR, ~0UL); - mci_writel(host, CR, MCI_CR_MCIEN); - } + spin_lock(&host->lock); + + if (!present) + clear_bit(ATMCI_CARD_PRESENT, &slot->flags); + else + set_bit(ATMCI_CARD_PRESENT, &slot->flags); /* Clean up queue if present */ + mrq = slot->mrq; if (mrq) { - /* - * Reset controller to terminate any ongoing - * commands or data transfers. - */ - mci_writel(host, CR, MCI_CR_SWRST); + if (mrq == host->mrq) { + /* + * Reset controller to terminate any ongoing + * commands or data transfers. + */ + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); - if (!atmci_is_completed(host, EVENT_CMD_COMPLETE)) - mrq->cmd->error = -ENOMEDIUM; - - if (mrq->data && !atmci_is_completed(host, - EVENT_DATA_COMPLETE)) { host->data = NULL; - mrq->data->error = -ENOMEDIUM; + host->cmd = NULL; + + switch (host->state) { + case STATE_IDLE: + break; + case STATE_SENDING_CMD: + mrq->cmd->error = -ENOMEDIUM; + if (!mrq->data) + break; + /* fall through */ + case STATE_SENDING_DATA: + mrq->data->error = -ENOMEDIUM; + atmci_stop_dma(host); + break; + case STATE_DATA_BUSY: + case STATE_DATA_ERROR: + if (mrq->data->error == -EINPROGRESS) + mrq->data->error = -ENOMEDIUM; + if (!mrq->stop) + break; + /* fall through */ + case STATE_SENDING_STOP: + mrq->stop->error = -ENOMEDIUM; + break; + } + + atmci_request_end(host, mrq); + } else { + list_del(&slot->queue_node); + mrq->cmd->error = -ENOMEDIUM; + if (mrq->data) + mrq->data->error = -ENOMEDIUM; + if (mrq->stop) + mrq->stop->error = -ENOMEDIUM; + + spin_unlock(&host->lock); + mmc_request_done(slot->mmc, mrq); + spin_lock(&host->lock); } - if (mrq->stop && !atmci_is_completed(host, - EVENT_STOP_COMPLETE)) - mrq->stop->error = -ENOMEDIUM; - - host->cmd = NULL; - atmci_request_end(host->mmc, mrq); } + spin_unlock(&host->lock); - mmc_detect_change(host->mmc, 0); + mmc_detect_change(slot->mmc, 0); } } static void atmci_tasklet_func(unsigned long priv) { - struct mmc_host *mmc = (struct mmc_host *)priv; - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci *host = (struct atmel_mci *)priv; struct mmc_request *mrq = host->mrq; struct mmc_data *data = host->data; + struct mmc_command *cmd = host->cmd; + enum atmel_mci_state state = host->state; + enum atmel_mci_state prev_state; + u32 status; + + spin_lock(&host->lock); - dev_vdbg(&mmc->class_dev, - "tasklet: pending/completed/mask %lx/%lx/%x\n", - host->pending_events, host->completed_events, + state = host->state; + + dev_vdbg(&host->pdev->dev, + "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", + state, host->pending_events, host->completed_events, mci_readl(host, IMR)); - if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) { - /* - * host->cmd must be set to NULL before the interrupt - * handler sees EVENT_CMD_COMPLETE - */ - host->cmd = NULL; - smp_wmb(); - atmci_set_completed(host, EVENT_CMD_COMPLETE); - atmci_command_complete(host, mrq->cmd, host->cmd_status); - - if (!mrq->cmd->error && mrq->stop - && atmci_is_completed(host, EVENT_XFER_COMPLETE) - && !atmci_test_and_set_completed(host, - EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, mrq->data); - } - if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) { - /* - * host->cmd must be set to NULL before the interrupt - * handler sees EVENT_STOP_COMPLETE - */ - host->cmd = NULL; - smp_wmb(); - atmci_set_completed(host, EVENT_STOP_COMPLETE); - atmci_command_complete(host, mrq->stop, host->stop_status); - } - if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { - u32 status = host->data_status; + do { + prev_state = state; - dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status); + switch (state) { + case STATE_IDLE: + break; - atmci_set_completed(host, EVENT_DATA_ERROR); - atmci_set_completed(host, EVENT_DATA_COMPLETE); + case STATE_SENDING_CMD: + if (!atmci_test_and_clear_pending(host, + EVENT_CMD_COMPLETE)) + break; - if (status & MCI_DTOE) { - dev_dbg(&mmc->class_dev, - "data timeout error\n"); - data->error = -ETIMEDOUT; - } else if (status & MCI_DCRCE) { - dev_dbg(&mmc->class_dev, "data CRC error\n"); - data->error = -EILSEQ; - } else { - dev_dbg(&mmc->class_dev, - "data FIFO error (status=%08x)\n", - status); - data->error = -EIO; - } + host->cmd = NULL; + atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_command_complete(host, mrq->cmd); + if (!mrq->data || cmd->error) { + atmci_request_end(host, host->mrq); + goto unlock; + } + + prev_state = state = STATE_SENDING_DATA; + /* fall through */ + + case STATE_SENDING_DATA: + if (atmci_test_and_clear_pending(host, + EVENT_DATA_ERROR)) { + atmci_stop_dma(host); + if (data->stop) + send_stop_cmd(host, data); + state = STATE_DATA_ERROR; + break; + } - if (host->present && data->stop - && atmci_is_completed(host, EVENT_CMD_COMPLETE) - && !atmci_test_and_set_completed( - host, EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, data); + if (!atmci_test_and_clear_pending(host, + EVENT_XFER_COMPLETE)) + break; - host->data = NULL; - } - if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) { - atmci_set_completed(host, EVENT_DATA_COMPLETE); + atmci_set_completed(host, EVENT_XFER_COMPLETE); + prev_state = state = STATE_DATA_BUSY; + /* fall through */ + + case STATE_DATA_BUSY: + if (!atmci_test_and_clear_pending(host, + EVENT_DATA_COMPLETE)) + break; - if (!atmci_is_completed(host, EVENT_DATA_ERROR)) { - data->bytes_xfered = data->blocks * data->blksz; - data->error = 0; + host->data = NULL; + atmci_set_completed(host, EVENT_DATA_COMPLETE); + status = host->data_status; + if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { + if (status & MCI_DTOE) { + dev_dbg(&host->pdev->dev, + "data timeout error\n"); + data->error = -ETIMEDOUT; + } else if (status & MCI_DCRCE) { + dev_dbg(&host->pdev->dev, + "data CRC error\n"); + data->error = -EILSEQ; + } else { + dev_dbg(&host->pdev->dev, + "data FIFO error (status=%08x)\n", + status); + data->error = -EIO; + } + } else { + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; + } + + if (!data->stop) { + atmci_request_end(host, host->mrq); + goto unlock; + } + + prev_state = state = STATE_SENDING_STOP; + if (!data->error) + send_stop_cmd(host, data); + /* fall through */ + + case STATE_SENDING_STOP: + if (!atmci_test_and_clear_pending(host, + EVENT_CMD_COMPLETE)) + break; + + host->cmd = NULL; + atmci_command_complete(host, mrq->stop); + atmci_request_end(host, host->mrq); + goto unlock; + + case STATE_DATA_ERROR: + if (!atmci_test_and_clear_pending(host, + EVENT_XFER_COMPLETE)) + break; + + state = STATE_DATA_BUSY; + break; } + } while (state != prev_state); - host->data = NULL; - } + host->state = state; - if (host->mrq && !host->cmd && !host->data) - atmci_request_end(mmc, host->mrq); +unlock: + spin_unlock(&host->lock); } static void atmci_read_data_pio(struct atmel_mci *host) @@ -789,6 +1253,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) nbytes += 4; if (offset == sg->length) { + flush_dcache_page(sg_page(sg)); host->sg = sg = sg_next(sg); if (!sg) goto done; @@ -817,9 +1282,11 @@ static void atmci_read_data_pio(struct atmel_mci *host) mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; + data->bytes_xfered += nbytes; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); - break; + return; } } while (status & MCI_RXRDY); @@ -832,10 +1299,8 @@ done: mci_writel(host, IDR, MCI_RXRDY); mci_writel(host, IER, MCI_NOTBUSY); data->bytes_xfered += nbytes; - atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) - && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, data); + smp_wmb(); + atmci_set_pending(host, EVENT_XFER_COMPLETE); } static void atmci_write_data_pio(struct atmel_mci *host) @@ -888,9 +1353,11 @@ static void atmci_write_data_pio(struct atmel_mci *host) mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; + data->bytes_xfered += nbytes; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); - break; + return; } } while (status & MCI_TXRDY); @@ -903,38 +1370,26 @@ done: mci_writel(host, IDR, MCI_TXRDY); mci_writel(host, IER, MCI_NOTBUSY); data->bytes_xfered += nbytes; - atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) - && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, data); + smp_wmb(); + atmci_set_pending(host, EVENT_XFER_COMPLETE); } -static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) +static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) { - struct atmel_mci *host = mmc_priv(mmc); - mci_writel(host, IDR, MCI_CMDRDY); - if (atmci_is_completed(host, EVENT_STOP_SENT)) { - host->stop_status = status; - atmci_set_pending(host, EVENT_STOP_COMPLETE); - } else { - host->cmd_status = status; - atmci_set_pending(host, EVENT_CMD_COMPLETE); - } - + host->cmd_status = status; + smp_wmb(); + atmci_set_pending(host, EVENT_CMD_COMPLETE); tasklet_schedule(&host->tasklet); } static irqreturn_t atmci_interrupt(int irq, void *dev_id) { - struct mmc_host *mmc = dev_id; - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci *host = dev_id; u32 status, mask, pending; unsigned int pass_count = 0; - spin_lock(&mmc->lock); - do { status = mci_readl(host, SR); mask = mci_readl(host, IMR); @@ -946,13 +1401,18 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS | MCI_RXRDY | MCI_TXRDY); pending &= mci_readl(host, IMR); + host->data_status = status; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); } if (pending & MCI_NOTBUSY) { - mci_writel(host, IDR, (MCI_NOTBUSY - | ATMCI_DATA_ERROR_FLAGS)); + mci_writel(host, IDR, + ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); + if (!host->data_status) + host->data_status = status; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_COMPLETE); tasklet_schedule(&host->tasklet); } @@ -962,18 +1422,15 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_write_data_pio(host); if (pending & MCI_CMDRDY) - atmci_cmd_interrupt(mmc, status); + atmci_cmd_interrupt(host, status); } while (pass_count++ < 5); - spin_unlock(&mmc->lock); - return pass_count ? IRQ_HANDLED : IRQ_NONE; } static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) { - struct mmc_host *mmc = dev_id; - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci_slot *slot = dev_id; /* * Disable interrupts until the pin has stabilized and check @@ -981,19 +1438,176 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) * middle of the timer routine when this interrupt triggers. */ disable_irq_nosync(irq); - mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20)); + mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20)); return IRQ_HANDLED; } +#ifdef CONFIG_MMC_ATMELMCI_DMA + +static inline struct atmel_mci * +dma_client_to_atmel_mci(struct dma_client *client) +{ + return container_of(client, struct atmel_mci, dma.client); +} + +static enum dma_state_client atmci_dma_event(struct dma_client *client, + struct dma_chan *chan, enum dma_state state) +{ + struct atmel_mci *host; + enum dma_state_client ret = DMA_NAK; + + host = dma_client_to_atmel_mci(client); + + switch (state) { + case DMA_RESOURCE_AVAILABLE: + spin_lock_bh(&host->lock); + if (!host->dma.chan) { + host->dma.chan = chan; + ret = DMA_ACK; + } + spin_unlock_bh(&host->lock); + + if (ret == DMA_ACK) + dev_info(&host->pdev->dev, + "Using %s for DMA transfers\n", + chan->dev.bus_id); + break; + + case DMA_RESOURCE_REMOVED: + spin_lock_bh(&host->lock); + if (host->dma.chan == chan) { + host->dma.chan = NULL; + ret = DMA_ACK; + } + spin_unlock_bh(&host->lock); + + if (ret == DMA_ACK) + dev_info(&host->pdev->dev, + "Lost %s, falling back to PIO\n", + chan->dev.bus_id); + break; + + default: + break; + } + + + return ret; +} +#endif /* CONFIG_MMC_ATMELMCI_DMA */ + +static int __init atmci_init_slot(struct atmel_mci *host, + struct mci_slot_pdata *slot_data, unsigned int id, + u32 sdc_reg) +{ + struct mmc_host *mmc; + struct atmel_mci_slot *slot; + + mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); + if (!mmc) + return -ENOMEM; + + slot = mmc_priv(mmc); + slot->mmc = mmc; + slot->host = host; + slot->detect_pin = slot_data->detect_pin; + slot->wp_pin = slot_data->wp_pin; + slot->sdc_reg = sdc_reg; + + mmc->ops = &atmci_ops; + mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); + mmc->f_max = host->bus_hz / 2; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + if (slot_data->bus_width >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + + /* Assume card is present initially */ + set_bit(ATMCI_CARD_PRESENT, &slot->flags); + if (gpio_is_valid(slot->detect_pin)) { + if (gpio_request(slot->detect_pin, "mmc_detect")) { + dev_dbg(&mmc->class_dev, "no detect pin available\n"); + slot->detect_pin = -EBUSY; + } else if (gpio_get_value(slot->detect_pin)) { + clear_bit(ATMCI_CARD_PRESENT, &slot->flags); + } + } + + if (!gpio_is_valid(slot->detect_pin)) + mmc->caps |= MMC_CAP_NEEDS_POLL; + + if (gpio_is_valid(slot->wp_pin)) { + if (gpio_request(slot->wp_pin, "mmc_wp")) { + dev_dbg(&mmc->class_dev, "no WP pin available\n"); + slot->wp_pin = -EBUSY; + } + } + + host->slot[id] = slot; + mmc_add_host(mmc); + + if (gpio_is_valid(slot->detect_pin)) { + int ret; + + setup_timer(&slot->detect_timer, atmci_detect_change, + (unsigned long)slot); + + ret = request_irq(gpio_to_irq(slot->detect_pin), + atmci_detect_interrupt, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-detect", slot); + if (ret) { + dev_dbg(&mmc->class_dev, + "could not request IRQ %d for detect pin\n", + gpio_to_irq(slot->detect_pin)); + gpio_free(slot->detect_pin); + slot->detect_pin = -EBUSY; + } + } + + atmci_init_debugfs(slot); + + return 0; +} + +static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, + unsigned int id) +{ + /* Debugfs stuff is cleaned up by mmc core */ + + set_bit(ATMCI_SHUTDOWN, &slot->flags); + smp_wmb(); + + mmc_remove_host(slot->mmc); + + if (gpio_is_valid(slot->detect_pin)) { + int pin = slot->detect_pin; + + free_irq(gpio_to_irq(pin), slot); + del_timer_sync(&slot->detect_timer); + gpio_free(pin); + } + if (gpio_is_valid(slot->wp_pin)) + gpio_free(slot->wp_pin); + + slot->host->slot[id] = NULL; + mmc_free_host(slot->mmc); +} + static int __init atmci_probe(struct platform_device *pdev) { struct mci_platform_data *pdata; - struct atmel_mci *host; - struct mmc_host *mmc; - struct resource *regs; - int irq; - int ret; + struct atmel_mci *host; + struct resource *regs; + unsigned int nr_slots; + int irq; + int ret; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) @@ -1005,15 +1619,13 @@ static int __init atmci_probe(struct platform_device *pdev) if (irq < 0) return irq; - mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); - if (!mmc) + host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL); + if (!host) return -ENOMEM; - host = mmc_priv(mmc); host->pdev = pdev; - host->mmc = mmc; - host->detect_pin = pdata->detect_pin; - host->wp_pin = pdata->wp_pin; + spin_lock_init(&host->lock); + INIT_LIST_HEAD(&host->queue); host->mck = clk_get(&pdev->dev, "mci_clk"); if (IS_ERR(host->mck)) { @@ -1033,122 +1645,102 @@ static int __init atmci_probe(struct platform_device *pdev) host->mapbase = regs->start; - mmc->ops = &atmci_ops; - mmc->f_min = (host->bus_hz + 511) / 512; - mmc->f_max = host->bus_hz / 2; - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps |= MMC_CAP_4_BIT_DATA; - - mmc->max_hw_segs = 64; - mmc->max_phys_segs = 64; - mmc->max_req_size = 32768 * 512; - mmc->max_blk_size = 32768; - mmc->max_blk_count = 512; - - tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); + tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); - ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc); + ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, host); if (ret) goto err_request_irq; - /* Assume card is present if we don't have a detect pin */ - host->present = 1; - if (gpio_is_valid(host->detect_pin)) { - if (gpio_request(host->detect_pin, "mmc_detect")) { - dev_dbg(&mmc->class_dev, "no detect pin available\n"); - host->detect_pin = -1; - } else { - host->present = !gpio_get_value(host->detect_pin); - } - } +#ifdef CONFIG_MMC_ATMELMCI_DMA + if (pdata->dma_slave) { + struct dma_slave *slave = pdata->dma_slave; - if (!gpio_is_valid(host->detect_pin)) - mmc->caps |= MMC_CAP_NEEDS_POLL; + slave->tx_reg = regs->start + MCI_TDR; + slave->rx_reg = regs->start + MCI_RDR; - if (gpio_is_valid(host->wp_pin)) { - if (gpio_request(host->wp_pin, "mmc_wp")) { - dev_dbg(&mmc->class_dev, "no WP pin available\n"); - host->wp_pin = -1; - } + /* Try to grab a DMA channel */ + host->dma.client.event_callback = atmci_dma_event; + dma_cap_set(DMA_SLAVE, host->dma.client.cap_mask); + host->dma.client.slave = slave; + + dma_async_client_register(&host->dma.client); + dma_async_client_chan_request(&host->dma.client); + } else { + dev_notice(&pdev->dev, "DMA not available, using PIO\n"); } +#endif /* CONFIG_MMC_ATMELMCI_DMA */ platform_set_drvdata(pdev, host); - mmc_add_host(mmc); - - if (gpio_is_valid(host->detect_pin)) { - setup_timer(&host->detect_timer, atmci_detect_change, - (unsigned long)host); - - ret = request_irq(gpio_to_irq(host->detect_pin), - atmci_detect_interrupt, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "mmc-detect", mmc); - if (ret) { - dev_dbg(&mmc->class_dev, - "could not request IRQ %d for detect pin\n", - gpio_to_irq(host->detect_pin)); - gpio_free(host->detect_pin); - host->detect_pin = -1; - } + /* We need at least one slot to succeed */ + nr_slots = 0; + ret = -ENODEV; + if (pdata->slot[0].bus_width) { + ret = atmci_init_slot(host, &pdata->slot[0], + MCI_SDCSEL_SLOT_A, 0); + if (!ret) + nr_slots++; + } + if (pdata->slot[1].bus_width) { + ret = atmci_init_slot(host, &pdata->slot[1], + MCI_SDCSEL_SLOT_B, 1); + if (!ret) + nr_slots++; } - dev_info(&mmc->class_dev, - "Atmel MCI controller at 0x%08lx irq %d\n", - host->mapbase, irq); + if (!nr_slots) + goto err_init_slot; - atmci_init_debugfs(host); + dev_info(&pdev->dev, + "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", + host->mapbase, irq, nr_slots); return 0; +err_init_slot: +#ifdef CONFIG_MMC_ATMELMCI_DMA + if (pdata->dma_slave) + dma_async_client_unregister(&host->dma.client); +#endif + free_irq(irq, host); err_request_irq: iounmap(host->regs); err_ioremap: clk_put(host->mck); err_clk_get: - mmc_free_host(mmc); + kfree(host); return ret; } static int __exit atmci_remove(struct platform_device *pdev) { - struct atmel_mci *host = platform_get_drvdata(pdev); + struct atmel_mci *host = platform_get_drvdata(pdev); + unsigned int i; platform_set_drvdata(pdev, NULL); - if (host) { - /* Debugfs stuff is cleaned up by mmc core */ - - if (gpio_is_valid(host->detect_pin)) { - int pin = host->detect_pin; - - /* Make sure the timer doesn't enable the interrupt */ - host->detect_pin = -1; - smp_wmb(); - - free_irq(gpio_to_irq(pin), host->mmc); - del_timer_sync(&host->detect_timer); - gpio_free(pin); - } - - mmc_remove_host(host->mmc); + for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + if (host->slot[i]) + atmci_cleanup_slot(host->slot[i], i); + } - clk_enable(host->mck); - mci_writel(host, IDR, ~0UL); - mci_writel(host, CR, MCI_CR_MCIDIS); - mci_readl(host, SR); - clk_disable(host->mck); + clk_enable(host->mck); + mci_writel(host, IDR, ~0UL); + mci_writel(host, CR, MCI_CR_MCIDIS); + mci_readl(host, SR); + clk_disable(host->mck); - if (gpio_is_valid(host->wp_pin)) - gpio_free(host->wp_pin); +#ifdef CONFIG_MMC_ATMELMCI_DMA + if (host->dma.client.slave) + dma_async_client_unregister(&host->dma.client); +#endif - free_irq(platform_get_irq(pdev, 0), host->mmc); - iounmap(host->regs); + free_irq(platform_get_irq(pdev, 0), host); + iounmap(host->regs); - clk_put(host->mck); + clk_put(host->mck); + kfree(host); - mmc_free_host(host->mmc); - } return 0; } diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 7503b81374e..07faf5412a1 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -95,8 +95,6 @@ * reads which takes nowhere near that long. Older cards may be able to use * shorter timeouts ... but why bother? */ -#define readblock_timeout ktime_set(0, 100 * 1000 * 1000) -#define writeblock_timeout ktime_set(0, 250 * 1000 * 1000) #define r1b_timeout ktime_set(3, 0) @@ -220,9 +218,9 @@ mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout) return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0); } -static int mmc_spi_readtoken(struct mmc_spi_host *host) +static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout) { - return mmc_spi_skip(host, readblock_timeout, 1, 0xff); + return mmc_spi_skip(host, timeout, 1, 0xff); } @@ -605,7 +603,8 @@ mmc_spi_setup_data_message( * Return negative errno, else success. */ static int -mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t) +mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, + ktime_t timeout) { struct spi_device *spi = host->spi; int status, i; @@ -673,7 +672,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t) if (scratch->status[i] != 0) return 0; } - return mmc_spi_wait_unbusy(host, writeblock_timeout); + return mmc_spi_wait_unbusy(host, timeout); } /* @@ -693,7 +692,8 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t) * STOP_TRANSMISSION command. */ static int -mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t) +mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, + ktime_t timeout) { struct spi_device *spi = host->spi; int status; @@ -707,7 +707,7 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t) return status; status = scratch->status[0]; if (status == 0xff || status == 0) - status = mmc_spi_readtoken(host); + status = mmc_spi_readtoken(host, timeout); if (status == SPI_TOKEN_SINGLE) { if (host->dma_dev) { @@ -778,6 +778,8 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, struct scatterlist *sg; unsigned n_sg; int multiple = (data->blocks > 1); + u32 clock_rate; + ktime_t timeout; if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; @@ -786,6 +788,14 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, mmc_spi_setup_data_message(host, multiple, direction); t = &host->t; + if (t->speed_hz) + clock_rate = t->speed_hz; + else + clock_rate = spi->max_speed_hz; + + timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns + + data->timeout_clks * 1000000 / clock_rate); + /* Handle scatterlist segments one at a time, with synch for * each 512-byte block */ @@ -832,9 +842,9 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, t->len); if (direction == DMA_TO_DEVICE) - status = mmc_spi_writeblock(host, t); + status = mmc_spi_writeblock(host, t, timeout); else - status = mmc_spi_readblock(host, t); + status = mmc_spi_readblock(host, t, timeout); if (status < 0) break; @@ -917,7 +927,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, if (scratch->status[tmp] != 0) return; } - tmp = mmc_spi_wait_unbusy(host, writeblock_timeout); + tmp = mmc_spi_wait_unbusy(host, timeout); if (tmp < 0 && !data->error) data->error = tmp; } diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index c16028872bb..1b9fc3c6b87 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -172,7 +172,7 @@ struct mmc_omap_host { struct omap_mmc_platform_data *pdata; }; -void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot) +static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot) { unsigned long tick_ns; @@ -182,7 +182,7 @@ void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot) } } -void mmc_omap_fclk_enable(struct mmc_omap_host *host, unsigned int enable) +static void mmc_omap_fclk_enable(struct mmc_omap_host *host, unsigned int enable) { unsigned long flags; @@ -1455,7 +1455,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->irq = irq; host->phys_base = host->mem_res->start; - host->virt_base = (void __iomem *) IO_ADDRESS(host->phys_base); + host->virt_base = ioremap(res->start, res->end - res->start + 1); + if (!host->virt_base) + goto err_ioremap; if (cpu_is_omap24xx()) { host->iclk = clk_get(&pdev->dev, "mmc_ick"); @@ -1510,6 +1512,8 @@ err_free_iclk: clk_put(host->iclk); } err_free_mmc_host: + iounmap(host->virt_base); +err_ioremap: kfree(host); err_free_mem_region: release_mem_region(res->start, res->end - res->start + 1); @@ -1536,6 +1540,7 @@ static int mmc_omap_remove(struct platform_device *pdev) if (host->fclk && !IS_ERR(host->fclk)) clk_put(host->fclk); + iounmap(host->virt_base); release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 55093ad132c..ebfaa996093 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -520,7 +520,7 @@ static int pxamci_probe(struct platform_device *pdev) /* * Block length register is only 10 bits before PXA27x. */ - mmc->max_blk_size = (cpu_is_pxa21x() || cpu_is_pxa25x()) ? 1023 : 2048; + mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048; /* * Block count register is 16 bits. @@ -554,7 +554,7 @@ static int pxamci_probe(struct platform_device *pdev) MMC_VDD_32_33|MMC_VDD_33_34; mmc->caps = 0; host->cmdat = 0; - if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) { + if (!cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; if (cpu_is_pxa300() || cpu_is_pxa310()) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index ae16d845d74..3b2085b5776 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -3,6 +3,9 @@ * * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de> * + * Current driver maintained by Ben Dooks and Simtec Electronics + * Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -13,6 +16,7 @@ #include <linux/clk.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> +#include <linux/cpufreq.h> #include <linux/irq.h> #include <linux/io.h> @@ -39,9 +43,9 @@ enum dbg_channels { dbg_conf = (1 << 8), }; -static const int dbgmap_err = dbg_err | dbg_fail; +static const int dbgmap_err = dbg_fail; static const int dbgmap_info = dbg_info | dbg_conf; -static const int dbgmap_debug = dbg_debug; +static const int dbgmap_debug = dbg_err | dbg_debug; #define dbg(host, channels, args...) \ do { \ @@ -189,7 +193,7 @@ static inline void clear_imask(struct s3cmci_host *host) } static inline int get_data_buffer(struct s3cmci_host *host, - u32 *words, u32 **pointer) + u32 *bytes, u32 **pointer) { struct scatterlist *sg; @@ -206,7 +210,7 @@ static inline int get_data_buffer(struct s3cmci_host *host, } sg = &host->mrq->data->sg[host->pio_sgptr]; - *words = sg->length >> 2; + *bytes = sg->length; *pointer = sg_virt(sg); host->pio_sgptr++; @@ -222,7 +226,7 @@ static inline u32 fifo_count(struct s3cmci_host *host) u32 fifostat = readl(host->base + S3C2410_SDIFSTA); fifostat &= S3C2410_SDIFSTA_COUNTMASK; - return fifostat >> 2; + return fifostat; } static inline u32 fifo_free(struct s3cmci_host *host) @@ -230,13 +234,15 @@ static inline u32 fifo_free(struct s3cmci_host *host) u32 fifostat = readl(host->base + S3C2410_SDIFSTA); fifostat &= S3C2410_SDIFSTA_COUNTMASK; - return (63 - fifostat) >> 2; + return 63 - fifostat; } static void do_pio_read(struct s3cmci_host *host) { int res; u32 fifo; + u32 *ptr; + u32 fifo_words; void __iomem *from_ptr; /* write real prescaler to host, it might be set slow to fix */ @@ -245,8 +251,8 @@ static void do_pio_read(struct s3cmci_host *host) from_ptr = host->base + host->sdidata; while ((fifo = fifo_count(host))) { - if (!host->pio_words) { - res = get_data_buffer(host, &host->pio_words, + if (!host->pio_bytes) { + res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); if (res) { host->pio_active = XFER_NONE; @@ -259,26 +265,47 @@ static void do_pio_read(struct s3cmci_host *host) dbg(host, dbg_pio, "pio_read(): new target: [%i]@[%p]\n", - host->pio_words, host->pio_ptr); + host->pio_bytes, host->pio_ptr); } dbg(host, dbg_pio, "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", - fifo, host->pio_words, + fifo, host->pio_bytes, readl(host->base + S3C2410_SDIDCNT)); - if (fifo > host->pio_words) - fifo = host->pio_words; + /* If we have reached the end of the block, we can + * read a word and get 1 to 3 bytes. If we in the + * middle of the block, we have to read full words, + * otherwise we will write garbage, so round down to + * an even multiple of 4. */ + if (fifo >= host->pio_bytes) + fifo = host->pio_bytes; + else + fifo -= fifo & 3; - host->pio_words -= fifo; + host->pio_bytes -= fifo; host->pio_count += fifo; - while (fifo--) - *(host->pio_ptr++) = readl(from_ptr); + fifo_words = fifo >> 2; + ptr = host->pio_ptr; + while (fifo_words--) + *ptr++ = readl(from_ptr); + host->pio_ptr = ptr; + + if (fifo & 3) { + u32 n = fifo & 3; + u32 data = readl(from_ptr); + u8 *p = (u8 *)host->pio_ptr; + + while (n--) { + *p++ = data; + data >>= 8; + } + } } - if (!host->pio_words) { - res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); + if (!host->pio_bytes) { + res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); if (res) { dbg(host, dbg_pio, "pio_read(): complete (no more buffers).\n"); @@ -298,12 +325,13 @@ static void do_pio_write(struct s3cmci_host *host) void __iomem *to_ptr; int res; u32 fifo; + u32 *ptr; to_ptr = host->base + host->sdidata; while ((fifo = fifo_free(host))) { - if (!host->pio_words) { - res = get_data_buffer(host, &host->pio_words, + if (!host->pio_bytes) { + res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); if (res) { dbg(host, dbg_pio, @@ -315,18 +343,27 @@ static void do_pio_write(struct s3cmci_host *host) dbg(host, dbg_pio, "pio_write(): new source: [%i]@[%p]\n", - host->pio_words, host->pio_ptr); + host->pio_bytes, host->pio_ptr); } - if (fifo > host->pio_words) - fifo = host->pio_words; + /* If we have reached the end of the block, we have to + * write exactly the remaining number of bytes. If we + * in the middle of the block, we have to write full + * words, so round down to an even multiple of 4. */ + if (fifo >= host->pio_bytes) + fifo = host->pio_bytes; + else + fifo -= fifo & 3; - host->pio_words -= fifo; + host->pio_bytes -= fifo; host->pio_count += fifo; + fifo = (fifo + 3) >> 2; + ptr = host->pio_ptr; while (fifo--) - writel(*(host->pio_ptr++), to_ptr); + writel(*ptr++, to_ptr); + host->pio_ptr = ptr; } enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); @@ -349,9 +386,9 @@ static void pio_tasklet(unsigned long data) clear_imask(host); if (host->pio_active != XFER_NONE) { dbg(host, dbg_err, "unfinished %s " - "- pio_count:[%u] pio_words:[%u]\n", + "- pio_count:[%u] pio_bytes:[%u]\n", (host->pio_active == XFER_READ) ? "read" : "write", - host->pio_count, host->pio_words); + host->pio_count, host->pio_bytes); if (host->mrq->data) host->mrq->data->error = -EINVAL; @@ -812,11 +849,10 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) /* We cannot deal with unaligned blocks with more than * one block being transfered. */ - if (data->blocks > 1) + if (data->blocks > 1) { + pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz); return -EINVAL; - - /* No support yet for non-word block transfers. */ - return -EINVAL; + } } while (readl(host->base + S3C2410_SDIDSTA) & @@ -896,7 +932,7 @@ static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); host->pio_sgptr = 0; - host->pio_words = 0; + host->pio_bytes = 0; host->pio_count = 0; host->pio_active = rw ? XFER_WRITE : XFER_READ; @@ -1033,10 +1069,33 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) s3cmci_send_request(mmc); } +static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios) +{ + u32 mci_psc; + + /* Set clock */ + for (mci_psc = 0; mci_psc < 255; mci_psc++) { + host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); + + if (host->real_rate <= ios->clock) + break; + } + + if (mci_psc > 255) + mci_psc = 255; + + host->prescaler = mci_psc; + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + /* If requested clock is 0, real_rate will be 0, too */ + if (ios->clock == 0) + host->real_rate = 0; +} + static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct s3cmci_host *host = mmc_priv(mmc); - u32 mci_psc, mci_con; + u32 mci_con; /* Set the power state */ @@ -1074,23 +1133,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; } - /* Set clock */ - for (mci_psc = 0; mci_psc < 255; mci_psc++) { - host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); - - if (host->real_rate <= ios->clock) - break; - } - - if (mci_psc > 255) - mci_psc = 255; - - host->prescaler = mci_psc; - writel(host->prescaler, host->base + S3C2410_SDIPRE); - - /* If requested clock is 0, real_rate will be 0, too */ - if (ios->clock == 0) - host->real_rate = 0; + s3cmci_set_clk(host, ios); /* Set CLOCK_ENABLE */ if (ios->clock) @@ -1148,6 +1191,61 @@ static struct s3c24xx_mci_pdata s3cmci_def_pdata = { * checks. Any zero fields to ensure reaonable defaults are picked. */ }; +#ifdef CONFIG_CPU_FREQ + +static int s3cmci_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3cmci_host *host; + struct mmc_host *mmc; + unsigned long newclk; + unsigned long flags; + + host = container_of(nb, struct s3cmci_host, freq_transition); + newclk = clk_get_rate(host->clk); + mmc = host->mmc; + + if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) || + (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) { + spin_lock_irqsave(&mmc->lock, flags); + + host->clk_rate = newclk; + + if (mmc->ios.power_mode != MMC_POWER_OFF && + mmc->ios.clock != 0) + s3cmci_set_clk(host, &mmc->ios); + + spin_unlock_irqrestore(&mmc->lock, flags); + } + + return 0; +} + +static inline int s3cmci_cpufreq_register(struct s3cmci_host *host) +{ + host->freq_transition.notifier_call = s3cmci_cpufreq_transition; + + return cpufreq_register_notifier(&host->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host) +{ + cpufreq_unregister_notifier(&host->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3cmci_cpufreq_register(struct s3cmci_host *host) +{ + return 0; +} + +static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host) +{ +} +#endif + static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) { struct s3cmci_host *host; @@ -1298,10 +1396,16 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) (host->is2440?"2440":""), host->base, host->irq, host->irq_cd, host->dma); + ret = s3cmci_cpufreq_register(host); + if (ret) { + dev_err(&pdev->dev, "failed to register cpufreq\n"); + goto free_dmabuf; + } + ret = mmc_add_host(mmc); if (ret) { dev_err(&pdev->dev, "failed to add mmc host.\n"); - goto free_dmabuf; + goto free_cpufreq; } platform_set_drvdata(pdev, mmc); @@ -1309,6 +1413,9 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) return 0; + free_cpufreq: + s3cmci_cpufreq_deregister(host); + free_dmabuf: clk_disable(host->clk); @@ -1342,6 +1449,7 @@ static void s3cmci_shutdown(struct platform_device *pdev) if (host->irq_cd >= 0) free_irq(host->irq_cd, host); + s3cmci_cpufreq_deregister(host); mmc_remove_host(mmc); clk_disable(host->clk); } @@ -1455,7 +1563,7 @@ module_exit(s3cmci_exit); MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>"); +MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>"); MODULE_ALIAS("platform:s3c2410-sdi"); MODULE_ALIAS("platform:s3c2412-sdi"); MODULE_ALIAS("platform:s3c2440-sdi"); diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index 37d9c60010c..ca1ba3d58cf 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -51,7 +51,7 @@ struct s3cmci_host { int dma_complete; u32 pio_sgptr; - u32 pio_words; + u32 pio_bytes; u32 pio_count; u32 *pio_ptr; #define XFER_NONE 0 @@ -67,4 +67,8 @@ struct s3cmci_host { unsigned int ccnt, dcnt; struct tasklet_struct pio_tasklet; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif }; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index fcb14c2346c..9bd7026b002 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -144,7 +144,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST | - SDHCI_QUIRK_BROKEN_SMALL_PIO; + SDHCI_QUIRK_BROKEN_SMALL_PIO | + SDHCI_QUIRK_FORCE_HIGHSPEED; } /* @@ -326,7 +327,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { { .vendor = PCI_VENDOR_ID_MARVELL, - .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, + .device = PCI_DEVICE_ID_MARVELL_88ALP01_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .driver_data = (kernel_ulong_t)&sdhci_cafe, diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index e3a8133560a..30f64b1f235 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -177,7 +177,7 @@ static void sdhci_read_block_pio(struct sdhci_host *host) { unsigned long flags; size_t blksize, len, chunk; - u32 scratch; + u32 uninitialized_var(scratch); u8 *buf; DBG("PIO reading\n"); @@ -1154,7 +1154,7 @@ static void sdhci_tasklet_card(unsigned long param) spin_unlock_irqrestore(&host->lock, flags); - mmc_detect_change(host->mmc, msecs_to_jiffies(500)); + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); } static void sdhci_tasklet_finish(unsigned long param) @@ -1266,9 +1266,31 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) SDHCI_INT_INDEX)) host->cmd->error = -EILSEQ; - if (host->cmd->error) + if (host->cmd->error) { tasklet_schedule(&host->finish_tasklet); - else if (intmask & SDHCI_INT_RESPONSE) + return; + } + + /* + * The host can send and interrupt when the busy state has + * ended, allowing us to wait without wasting CPU cycles. + * Unfortunately this is overloaded on the "data complete" + * interrupt, so we need to take some care when handling + * it. + * + * Note: The 1.0 specification is a bit ambiguous about this + * feature so there might be some problems with older + * controllers. + */ + if (host->cmd->flags & MMC_RSP_BUSY) { + if (host->cmd->data) + DBG("Cannot wait for busy signal when also " + "doing a data transfer"); + else + return; + } + + if (intmask & SDHCI_INT_RESPONSE) sdhci_finish_command(host); } @@ -1278,11 +1300,16 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (!host->data) { /* - * A data end interrupt is sent together with the response - * for the stop command. + * The "data complete" interrupt is also used to + * indicate that a busy state has ended. See comment + * above in sdhci_cmd_irq(). */ - if (intmask & SDHCI_INT_DATA_END) - return; + if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { + if (intmask & SDHCI_INT_DATA_END) { + sdhci_finish_command(host); + return; + } + } printk(KERN_ERR "%s: Got data interrupt 0x%08x even " "though no data operation was in progress.\n", @@ -1604,7 +1631,8 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; - if (caps & SDHCI_CAN_DO_HISPD) + if ((caps & SDHCI_CAN_DO_HISPD) || + (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED)) mmc->caps |= MMC_CAP_SD_HIGHSPEED; mmc->ocr_avail = 0; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 197d4a05f4a..31f4b1528e7 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -208,6 +208,8 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) /* Controller has an issue with buffer bits for small transfers */ #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) +/* Controller supports high speed but doesn't have the caps bit set */ +#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ |