diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/at91_mci.c | 144 | ||||
| -rw-r--r-- | drivers/mmc/au1xmmc.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/imxmmc.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/mmc.c | 1 | ||||
| -rw-r--r-- | drivers/mmc/mmc_block.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/mmci.c | 9 | ||||
| -rw-r--r-- | drivers/mmc/omap.c | 52 | ||||
| -rw-r--r-- | drivers/mmc/pxamci.c | 1 | ||||
| -rw-r--r-- | drivers/mmc/sdhci.c | 604 | ||||
| -rw-r--r-- | drivers/mmc/sdhci.h | 34 | ||||
| -rw-r--r-- | drivers/mmc/wbsd.c | 3 |
11 files changed, 558 insertions, 300 deletions
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 88f0eef9cf3..6b7638b8429 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -53,7 +53,6 @@ Gets the status of the write protect pin, if available. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -81,13 +80,6 @@ #undef SUPPORT_4WIRE -#ifdef CONFIG_MMC_DEBUG -#define DBG(fmt...) \ - printk(fmt) -#else -#define DBG(fmt...) do { } while (0) -#endif - static struct clk *mci_clk; #define FL_SENT_COMMAND (1 << 0) @@ -202,50 +194,50 @@ static void at91mci_pre_dma_read(struct at91mci_host *host) struct mmc_command *cmd; struct mmc_data *data; - DBG("pre dma read\n"); + pr_debug("pre dma read\n"); cmd = host->cmd; if (!cmd) { - DBG("no command\n"); + pr_debug("no command\n"); return; } data = cmd->data; if (!data) { - DBG("no data\n"); + pr_debug("no data\n"); return; } for (i = 0; i < 2; i++) { /* nothing left to transfer */ if (host->transfer_index >= data->sg_len) { - DBG("Nothing left to transfer (index = %d)\n", host->transfer_index); + pr_debug("Nothing left to transfer (index = %d)\n", host->transfer_index); break; } /* Check to see if this needs filling */ if (i == 0) { if (at91_mci_read(AT91_PDC_RCR) != 0) { - DBG("Transfer active in current\n"); + pr_debug("Transfer active in current\n"); continue; } } else { if (at91_mci_read(AT91_PDC_RNCR) != 0) { - DBG("Transfer active in next\n"); + pr_debug("Transfer active in next\n"); continue; } } /* Setup the next transfer */ - DBG("Using transfer index %d\n", host->transfer_index); + pr_debug("Using transfer index %d\n", host->transfer_index); sg = &data->sg[host->transfer_index++]; - DBG("sg = %p\n", sg); + pr_debug("sg = %p\n", sg); sg->dma_address = dma_map_page(NULL, sg->page, sg->offset, sg->length, DMA_FROM_DEVICE); - DBG("dma address = %08X, length = %d\n", sg->dma_address, sg->length); + pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length); if (i == 0) { at91_mci_write(AT91_PDC_RPR, sg->dma_address); @@ -257,7 +249,7 @@ static void at91mci_pre_dma_read(struct at91mci_host *host) } } - DBG("pre dma read done\n"); + pr_debug("pre dma read done\n"); } /* @@ -268,17 +260,17 @@ static void at91mci_post_dma_read(struct at91mci_host *host) struct mmc_command *cmd; struct mmc_data *data; - DBG("post dma read\n"); + pr_debug("post dma read\n"); cmd = host->cmd; if (!cmd) { - DBG("no command\n"); + pr_debug("no command\n"); return; } data = cmd->data; if (!data) { - DBG("no data\n"); + pr_debug("no data\n"); return; } @@ -289,17 +281,17 @@ static void at91mci_post_dma_read(struct at91mci_host *host) struct scatterlist *sg; - DBG("finishing index %d\n", host->in_use_index); + pr_debug("finishing index %d\n", host->in_use_index); sg = &data->sg[host->in_use_index++]; - DBG("Unmapping page %08X\n", sg->dma_address); + pr_debug("Unmapping page %08X\n", sg->dma_address); dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE); /* Swap the contents of the buffer */ buffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset; - DBG("buffer = %p, length = %d\n", buffer, sg->length); + pr_debug("buffer = %p, length = %d\n", buffer, sg->length); data->bytes_xfered += sg->length; @@ -320,7 +312,7 @@ static void at91mci_post_dma_read(struct at91mci_host *host) at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); } - DBG("post dma read done\n"); + pr_debug("post dma read done\n"); } /* @@ -331,7 +323,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) struct mmc_command *cmd; struct mmc_data *data; - DBG("Handling the transmit\n"); + pr_debug("Handling the transmit\n"); /* Disable the transfer */ at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); @@ -387,12 +379,12 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ /* Not sure if this is needed */ #if 0 if ((at91_mci_read(AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) { - DBG("Clearing timeout\n"); + pr_debug("Clearing timeout\n"); at91_mci_write(AT91_MCI_ARGR, 0); at91_mci_write(AT91_MCI_CMDR, AT91_MCI_OPDCMD); while (!(at91_mci_read(AT91_MCI_SR) & AT91_MCI_CMDRDY)) { /* spin */ - DBG("Clearing: SR = %08X\n", at91_mci_read(AT91_MCI_SR)); + pr_debug("Clearing: SR = %08X\n", at91_mci_read(AT91_MCI_SR)); } } #endif @@ -411,7 +403,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ } if (data) { - block_length = 1 << data->blksz_bits; + block_length = data->blksz; blocks = data->blocks; /* always set data start - also set direction flag for read */ @@ -439,7 +431,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ /* * Set the arguments and send the command */ - DBG("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n", + pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n", cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(AT91_MCI_MR)); if (!data) { @@ -491,7 +483,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ at91mci_sg_to_dma(host, data); - DBG("Transmitting %d bytes\n", host->total_length); + pr_debug("Transmitting %d bytes\n", host->total_length); at91_mci_write(AT91_PDC_TPR, host->physical_address); at91_mci_write(AT91_PDC_TCR, host->total_length / 4); @@ -525,7 +517,7 @@ static void at91mci_process_command(struct at91mci_host *host, struct mmc_comman ier = at91_mci_send_command(host, cmd); - DBG("setting ier to %08X\n", ier); + pr_debug("setting ier to %08X\n", ier); /* Stop on errors or the required value */ at91_mci_write(AT91_MCI_IER, 0xffff0000 | ier); @@ -570,7 +562,7 @@ static void at91mci_completed_command(struct at91mci_host *host) status = at91_mci_read(AT91_MCI_SR); - DBG("Status = %08X [%08X %08X %08X %08X]\n", + pr_debug("Status = %08X [%08X %08X %08X %08X]\n", status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE | @@ -590,7 +582,7 @@ static void at91mci_completed_command(struct at91mci_host *host) else cmd->error = MMC_ERR_FAILED; - DBG("Error detected and set to %d (cmd = %d, retries = %d)\n", + pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n", cmd->error, cmd->opcode, cmd->retries); } } @@ -621,10 +613,7 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct at91mci_host *host = mmc_priv(mmc); unsigned long at91_master_clock = clk_get_rate(mci_clk); - if (host) - host->bus_mode = ios->bus_mode; - else - printk("MMC: No host for bus_mode\n"); + host->bus_mode = ios->bus_mode; if (ios->clock == 0) { /* Disable the MCI controller */ @@ -640,15 +629,15 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) else clkdiv = (at91_master_clock / ios->clock) / 2; - DBG("clkdiv = %d. mcck = %ld\n", clkdiv, + pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv, at91_master_clock / (2 * (clkdiv + 1))); } if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) { - DBG("MMC: Setting controller bus width to 4\n"); + pr_debug("MMC: Setting controller bus width to 4\n"); at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) | AT91_MCI_SDCBUS); } else { - DBG("MMC: Setting controller bus width to 1\n"); + pr_debug("MMC: Setting controller bus width to 1\n"); at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS); } @@ -656,7 +645,7 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) at91_mci_write(AT91_MCI_MR, (at91_mci_read(AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv); /* maybe switch power to the card */ - if (host && host->board->vcc_pin) { + if (host->board->vcc_pin) { switch (ios->power_mode) { case MMC_POWER_OFF: at91_set_gpio_output(host->board->vcc_pin, 0); @@ -679,11 +668,8 @@ static irqreturn_t at91_mci_irq(int irq, void *devid, struct pt_regs *regs) unsigned int int_status; - if (host == NULL) - return IRQ_HANDLED; - int_status = at91_mci_read(AT91_MCI_SR); - DBG("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(AT91_MCI_IMR), + pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(AT91_MCI_IMR), int_status & at91_mci_read(AT91_MCI_IMR)); if ((int_status & at91_mci_read(AT91_MCI_IMR)) & 0xffff0000) @@ -692,75 +678,75 @@ static irqreturn_t at91_mci_irq(int irq, void *devid, struct pt_regs *regs) int_status &= at91_mci_read(AT91_MCI_IMR); if (int_status & AT91_MCI_UNRE) - DBG("MMC: Underrun error\n"); + pr_debug("MMC: Underrun error\n"); if (int_status & AT91_MCI_OVRE) - DBG("MMC: Overrun error\n"); + pr_debug("MMC: Overrun error\n"); if (int_status & AT91_MCI_DTOE) - DBG("MMC: Data timeout\n"); + pr_debug("MMC: Data timeout\n"); if (int_status & AT91_MCI_DCRCE) - DBG("MMC: CRC error in data\n"); + pr_debug("MMC: CRC error in data\n"); if (int_status & AT91_MCI_RTOE) - DBG("MMC: Response timeout\n"); + pr_debug("MMC: Response timeout\n"); if (int_status & AT91_MCI_RENDE) - DBG("MMC: Response end bit error\n"); + pr_debug("MMC: Response end bit error\n"); if (int_status & AT91_MCI_RCRCE) - DBG("MMC: Response CRC error\n"); + pr_debug("MMC: Response CRC error\n"); if (int_status & AT91_MCI_RDIRE) - DBG("MMC: Response direction error\n"); + pr_debug("MMC: Response direction error\n"); if (int_status & AT91_MCI_RINDE) - DBG("MMC: Response index error\n"); + pr_debug("MMC: Response index error\n"); /* Only continue processing if no errors */ if (!completed) { if (int_status & AT91_MCI_TXBUFE) { - DBG("TX buffer empty\n"); + pr_debug("TX buffer empty\n"); at91_mci_handle_transmitted(host); } if (int_status & AT91_MCI_RXBUFF) { - DBG("RX buffer full\n"); + pr_debug("RX buffer full\n"); at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY); } if (int_status & AT91_MCI_ENDTX) { - DBG("Transmit has ended\n"); + pr_debug("Transmit has ended\n"); } if (int_status & AT91_MCI_ENDRX) { - DBG("Receive has ended\n"); + pr_debug("Receive has ended\n"); at91mci_post_dma_read(host); } if (int_status & AT91_MCI_NOTBUSY) { - DBG("Card is ready\n"); + pr_debug("Card is ready\n"); at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY); } if (int_status & AT91_MCI_DTIP) { - DBG("Data transfer in progress\n"); + pr_debug("Data transfer in progress\n"); } if (int_status & AT91_MCI_BLKE) { - DBG("Block transfer has ended\n"); + pr_debug("Block transfer has ended\n"); } if (int_status & AT91_MCI_TXRDY) { - DBG("Ready to transmit\n"); + pr_debug("Ready to transmit\n"); } if (int_status & AT91_MCI_RXRDY) { - DBG("Ready to receive\n"); + pr_debug("Ready to receive\n"); } if (int_status & AT91_MCI_CMDRDY) { - DBG("Command ready\n"); + pr_debug("Command ready\n"); completed = 1; } } at91_mci_write(AT91_MCI_IDR, int_status); if (completed) { - DBG("Completed command\n"); + pr_debug("Completed command\n"); at91_mci_write(AT91_MCI_IDR, 0xffffffff); at91mci_completed_command(host); } @@ -779,10 +765,10 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host, struct pt_regs *regs) */ if (present != host->present) { host->present = present; - DBG("%s: card %s\n", mmc_hostname(host->mmc), + pr_debug("%s: card %s\n", mmc_hostname(host->mmc), present ? "insert" : "remove"); if (!present) { - DBG("****** Resetting SD-card bus width ******\n"); + pr_debug("****** Resetting SD-card bus width ******\n"); at91_mci_write(AT91_MCI_SDCR, 0); } mmc_detect_change(host->mmc, msecs_to_jiffies(100)); @@ -822,13 +808,13 @@ static int at91_mci_probe(struct platform_device *pdev) struct at91mci_host *host; int ret; - DBG("Probe MCI devices\n"); + pr_debug("Probe MCI devices\n"); at91_mci_disable(); at91_mci_enable(); mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev); if (!mmc) { - DBG("Failed to allocate mmc host\n"); + pr_debug("Failed to allocate mmc host\n"); return -ENOMEM; } @@ -854,8 +840,9 @@ static int at91_mci_probe(struct platform_device *pdev) * Get Clock */ mci_clk = clk_get(&pdev->dev, "mci_clk"); - if (!mci_clk) { + if (IS_ERR(mci_clk)) { printk(KERN_ERR "AT91 MMC: no clock defined.\n"); + mmc_free_host(mmc); return -ENODEV; } clk_enable(mci_clk); /* Enable the peripheral clock */ @@ -863,9 +850,12 @@ static int at91_mci_probe(struct platform_device *pdev) /* * Allocate the MCI interrupt */ - ret = request_irq(AT91_ID_MCI, at91_mci_irq, SA_SHIRQ, DRIVER_NAME, host); + ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); if (ret) { - DBG("Failed to request MCI interrupt\n"); + printk(KERN_ERR "Failed to request MCI interrupt\n"); + clk_disable(mci_clk); + clk_put(mci_clk); + mmc_free_host(mmc); return ret; } @@ -886,12 +876,12 @@ static int at91_mci_probe(struct platform_device *pdev) */ if (host->board->det_pin) { ret = request_irq(host->board->det_pin, at91_mmc_det_irq, - SA_SAMPLE_RANDOM, DRIVER_NAME, host); + 0, DRIVER_NAME, host); if (ret) - DBG("couldn't allocate MMC detect irq\n"); + printk(KERN_ERR "couldn't allocate MMC detect irq\n"); } - DBG(KERN_INFO "Added MCI driver\n"); + pr_debug(KERN_INFO "Added MCI driver\n"); return 0; } @@ -924,7 +914,7 @@ static int at91_mci_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - DBG("Removed\n"); + pr_debug("MCI Removed\n"); return 0; } diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 5dc4bee7abe..fb606165af3 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -34,7 +34,6 @@ * So we use the timer to check the status manually. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -887,7 +886,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) int i, ret = 0; /* THe interrupt is shared among all controllers */ - ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, SA_INTERRUPT, "MMC", 0); + ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0); if (ret) { printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n", diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index a4eb1d0e7a7..7ca9e95bdf8 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -25,7 +25,6 @@ * deficiencies * */ -#include <linux/config.h> #ifdef CONFIG_MMC_DEBUG #define DEBUG @@ -228,7 +227,7 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host, static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) { unsigned int nob = data->blocks; - unsigned int blksz = 1 << data->blksz_bits; + unsigned int blksz = data->blksz; unsigned int datasz = nob * blksz; int i; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 6201f3086a0..247ff2f23ac 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -9,7 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 587458b370b..115cc21094b 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -27,7 +27,6 @@ #include <linux/hdreg.h> #include <linux/kdev_t.h> #include <linux/blkdev.h> -#include <linux/devfs_fs_kernel.h> #include <linux/mutex.h> #include <linux/mmc/card.h> @@ -409,7 +408,6 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) */ sprintf(md->disk->disk_name, "mmcblk%d", devidx); - sprintf(md->disk->devfs_name, "mmc/blk%d", devidx); blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); @@ -555,7 +553,6 @@ static int __init mmc_blk_init(void) if (major == 0) major = res; - devfs_mk_dir("mmc"); return mmc_register_driver(&mmc_driver); out: @@ -565,7 +562,6 @@ static int __init mmc_blk_init(void) static void __exit mmc_blk_exit(void) { mmc_unregister_driver(&mmc_driver); - devfs_remove("mmc"); unregister_blkdev(major, "mmc"); } diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index da8e4d7339c..1886562abdd 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -532,11 +531,11 @@ static int mmci_probe(struct amba_device *dev, void *id) writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); - ret = request_irq(dev->irq[0], mmci_irq, SA_SHIRQ, DRIVER_NAME " (cmd)", host); + ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); if (ret) goto unmap; - ret = request_irq(dev->irq[1], mmci_pio_irq, SA_SHIRQ, DRIVER_NAME " (pio)", host); + ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host); if (ret) goto irq0_free; @@ -546,9 +545,9 @@ static int mmci_probe(struct amba_device *dev, void *id) mmc_add_host(mmc); - printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%08lx irq %d,%d\n", + printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n", mmc_hostname(mmc), amba_rev(dev), amba_config(dev), - dev->res.start, dev->irq[0], dev->irq[1]); + (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); init_timer(&host->timer); host->timer.data = (unsigned long)host; diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c index becb3c68c34..ddf06b32c15 100644 --- a/drivers/mmc/omap.c +++ b/drivers/mmc/omap.c @@ -11,7 +11,6 @@ * published by the Free Software Foundation. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -61,6 +60,7 @@ struct mmc_omap_host { unsigned char id; /* 16xx chips have 2 MMC blocks */ struct clk * iclk; struct clk * fclk; + struct resource *res; void __iomem *base; int irq; unsigned char bus_mode; @@ -340,8 +340,6 @@ static void mmc_omap_xfer_data(struct mmc_omap_host *host, int write) { int n; - void __iomem *reg; - u16 *p; if (host->buffer_bytes_left == 0) { host->sg_idx++; @@ -584,10 +582,10 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data) int sync_dev = 0; data_addr = io_v2p((u32) host->base) + OMAP_MMC_REG_DATA; - frame = 1 << data->blksz_bits; + frame = data->blksz; count = sg_dma_len(sg); - if ((data->blocks == 1) && (count > (1 << data->blksz_bits))) + if ((data->blocks == 1) && (count > data->blksz)) count = frame; host->dma_len = count; @@ -658,12 +656,12 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) struct mmc_data *mmcdat = host->data; if (unlikely(host->dma_ch < 0)) { - dev_err(mmc_dev(host->mmc), "DMA callback while DMA not - enabled\n"); + dev_err(mmc_dev(host->mmc), + "DMA callback while DMA not enabled\n"); return; } /* FIXME: We really should do something to _handle_ the errors */ - if (ch_status & OMAP_DMA_TOUT_IRQ) { + if (ch_status & OMAP1_DMA_TOUT_IRQ) { dev_err(mmc_dev(host->mmc),"DMA timeout\n"); return; } @@ -776,7 +774,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) } - block_size = 1 << data->blksz_bits; + block_size = data->blksz; OMAP_MMC_WRITE(host->base, NBLK, data->blocks - 1); OMAP_MMC_WRITE(host->base, BLEN, block_size - 1); @@ -973,20 +971,20 @@ static int __init mmc_omap_probe(struct platform_device *pdev) struct omap_mmc_conf *minfo = pdev->dev.platform_data; struct mmc_host *mmc; struct mmc_omap_host *host = NULL; + struct resource *r; int ret = 0; + int irq; - if (platform_get_resource(pdev, IORESOURCE_MEM, 0) || - platform_get_irq(pdev, IORESOURCE_IRQ, 0)) { - dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n"); - return -ENODEV; - } + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (!r || irq < 0) + return -ENXIO; - if (!request_mem_region(pdev->resource[0].start, + r = request_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1, - pdev->name)) { - dev_dbg(&pdev->dev, "request_mem_region failed\n"); + pdev->name); + if (!r) return -EBUSY; - } mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); if (!mmc) { @@ -1003,6 +1001,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->dma_timer.data = (unsigned long) host; host->id = pdev->id; + host->res = r; + host->irq = irq; if (cpu_is_omap24xx()) { host->iclk = clk_get(&pdev->dev, "mmc_ick"); @@ -1032,13 +1032,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->dma_ch = -1; host->irq = pdev->resource[1].start; - host->base = ioremap(pdev->res.start, SZ_4K); - if (!host->base) { - ret = -ENOMEM; - goto out; - } + host->base = (void __iomem*)IO_ADDRESS(r->start); - if (minfo->wire4) + if (minfo->wire4) mmc->caps |= MMC_CAP_4_BIT_DATA; mmc->ops = &mmc_omap_ops; @@ -1057,8 +1053,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev) if (host->power_pin >= 0) { if ((ret = omap_request_gpio(host->power_pin)) != 0) { - dev_err(mmc_dev(host->mmc), "Unable to get GPIO - pin for MMC power\n"); + dev_err(mmc_dev(host->mmc), + "Unable to get GPIO pin for MMC power\n"); goto out; } omap_set_gpio_direction(host->power_pin, 0); @@ -1086,7 +1082,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev) omap_set_gpio_direction(host->switch_pin, 1); ret = request_irq(OMAP_GPIO_IRQ(host->switch_pin), - mmc_omap_switch_irq, SA_TRIGGER_RISING, DRIVER_NAME, host); + mmc_omap_switch_irq, IRQF_TRIGGER_RISING, DRIVER_NAME, host); if (ret) { dev_warn(mmc_dev(host->mmc), "Unable to get IRQ for MMC cover switch\n"); omap_free_gpio(host->switch_pin); @@ -1100,7 +1096,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev) device_remove_file(&pdev->dev, &dev_attr_cover_switch); } if (ret) { - dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n"); + dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n"); free_irq(OMAP_GPIO_IRQ(host->switch_pin), host); omap_free_gpio(host->switch_pin); host->switch_pin = -1; diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index b49368fd96b..ef350908478 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -16,7 +16,6 @@ * 1 and 3 byte data transfers not supported * max block length up to 1023 */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/ioport.h> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index b0053280ff2..893319108ba 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -8,12 +8,6 @@ * published by the Free Software Foundation. */ - /* - * Note that PIO transfer is rather crappy atm. The buffer full/empty - * interrupts aren't reliable so we currently transfer the entire buffer - * directly. Patches to solve the problem are welcome. - */ - #include <linux/delay.h> #include <linux/highmem.h> #include <linux/pci.h> @@ -27,16 +21,50 @@ #include "sdhci.h" #define DRIVER_NAME "sdhci" -#define DRIVER_VERSION "0.11" +#define DRIVER_VERSION "0.12" #define BUGMAIL "<sdhci-devel@list.drzeus.cx>" #define DBG(f, x...) \ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x) +static unsigned int debug_nodma = 0; +static unsigned int debug_forcedma = 0; +static unsigned int debug_quirks = 0; + +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +#define SDHCI_QUIRK_FORCE_DMA (1<<1) + static const struct pci_device_id pci_ids[] __devinitdata = { - /* handle any SD host controller */ - {PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)}, + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET | + SDHCI_QUIRK_FORCE_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_FORCE_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_TI, + .device = PCI_DEVICE_ID_TI_XX21_XX11_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_FORCE_DMA, + }, + + { /* Generic SD host controller */ + PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) + }, + { /* end: all zeroes */ }, }; @@ -94,12 +122,27 @@ static void sdhci_dumpregs(struct sdhci_host *host) static void sdhci_reset(struct sdhci_host *host, u8 mask) { + unsigned long timeout; + writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET); - if (mask & SDHCI_RESET_ALL) { + if (mask & SDHCI_RESET_ALL) host->clock = 0; - mdelay(50); + /* Wait max 100 ms */ + timeout = 100; + + /* hw clears the bit when it's done */ + while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) { + if (timeout == 0) { + printk(KERN_ERR "%s: Reset 0x%x never completed. " + "Please report this to " BUGMAIL ".\n", + mmc_hostname(host->mmc), (int)mask); + sdhci_dumpregs(host); + return; + } + timeout--; + mdelay(1); } } @@ -109,13 +152,15 @@ static void sdhci_init(struct sdhci_host *host) sdhci_reset(host, SDHCI_RESET_ALL); - intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL); + intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | + SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | + SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | + SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT | + SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | + SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE; writel(intmask, host->ioaddr + SDHCI_INT_ENABLE); writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE); - - /* This is unknown magic. */ - writeb(0xE, host->ioaddr + SDHCI_TIMEOUT_CONTROL); } static void sdhci_activate_led(struct sdhci_host *host) @@ -172,79 +217,96 @@ static inline int sdhci_next_sg(struct sdhci_host* host) return host->num_sg; } -static void sdhci_transfer_pio(struct sdhci_host *host) +static void sdhci_read_block_pio(struct sdhci_host *host) { + int blksize, chunk_remain; + u32 data; char *buffer; - u32 mask; - int bytes, size; - unsigned long max_jiffies; + int size; - BUG_ON(!host->data); + DBG("PIO reading\n"); - if (host->num_sg == 0) - return; - - bytes = 0; - if (host->data->flags & MMC_DATA_READ) - mask = SDHCI_DATA_AVAILABLE; - else - mask = SDHCI_SPACE_AVAILABLE; + blksize = host->data->blksz; + chunk_remain = 0; + data = 0; buffer = sdhci_kmap_sg(host) + host->offset; - /* Transfer shouldn't take more than 5 s */ - max_jiffies = jiffies + HZ * 5; + while (blksize) { + if (chunk_remain == 0) { + data = readl(host->ioaddr + SDHCI_BUFFER); + chunk_remain = min(blksize, 4); + } - while (host->size > 0) { - if (time_after(jiffies, max_jiffies)) { - printk(KERN_ERR "%s: PIO transfer stalled. " - "Please report this to " - BUGMAIL ".\n", mmc_hostname(host->mmc)); - sdhci_dumpregs(host); + size = min(host->size, host->remain); + size = min(size, chunk_remain); - sdhci_kunmap_sg(host); + chunk_remain -= size; + blksize -= size; + host->offset += size; + host->remain -= size; + host->size -= size; + while (size) { + *buffer = data & 0xFF; + buffer++; + data >>= 8; + size--; + } - host->data->error = MMC_ERR_FAILED; - sdhci_finish_data(host); - return; + if (host->remain == 0) { + sdhci_kunmap_sg(host); + if (sdhci_next_sg(host) == 0) { + BUG_ON(blksize != 0); + return; + } + buffer = sdhci_kmap_sg(host); } + } - if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask)) - continue; + sdhci_kunmap_sg(host); +} - size = min(host->size, host->remain); +static void sdhci_write_block_pio(struct sdhci_host *host) +{ + int blksize, chunk_remain; + u32 data; + char *buffer; + int bytes, size; - if (size >= 4) { - if (host->data->flags & MMC_DATA_READ) - *(u32*)buffer = readl(host->ioaddr + SDHCI_BUFFER); - else - writel(*(u32*)buffer, host->ioaddr + SDHCI_BUFFER); - size = 4; - } else if (size >= 2) { - if (host->data->flags & MMC_DATA_READ) - *(u16*)buffer = readw(host->ioaddr + SDHCI_BUFFER); - else - writew(*(u16*)buffer, host->ioaddr + SDHCI_BUFFER); - size = 2; - } else { - if (host->data->flags & MMC_DATA_READ) - *(u8*)buffer = readb(host->ioaddr + SDHCI_BUFFER); - else - writeb(*(u8*)buffer, host->ioaddr + SDHCI_BUFFER); - size = 1; - } + DBG("PIO writing\n"); + + blksize = host->data->blksz; + chunk_remain = 4; + data = 0; - buffer += size; + bytes = 0; + buffer = sdhci_kmap_sg(host) + host->offset; + + while (blksize) { + size = min(host->size, host->remain); + size = min(size, chunk_remain); + + chunk_remain -= size; + blksize -= size; host->offset += size; host->remain -= size; - - bytes += size; host->size -= size; + while (size) { + data >>= 8; + data |= (u32)*buffer << 24; + buffer++; + size--; + } + + if (chunk_remain == 0) { + writel(data, host->ioaddr + SDHCI_BUFFER); + chunk_remain = min(blksize, 4); + } if (host->remain == 0) { sdhci_kunmap_sg(host); if (sdhci_next_sg(host) == 0) { - DBG("PIO transfer: %d bytes\n", bytes); + BUG_ON(blksize != 0); return; } buffer = sdhci_kmap_sg(host); @@ -252,38 +314,87 @@ static void sdhci_transfer_pio(struct sdhci_host *host) } sdhci_kunmap_sg(host); +} + +static void sdhci_transfer_pio(struct sdhci_host *host) +{ + u32 mask; + + BUG_ON(!host->data); + + if (host->size == 0) + return; + + if (host->data->flags & MMC_DATA_READ) + mask = SDHCI_DATA_AVAILABLE; + else + mask = SDHCI_SPACE_AVAILABLE; + + while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { + if (host->data->flags & MMC_DATA_READ) + sdhci_read_block_pio(host); + else + sdhci_write_block_pio(host); + + if (host->size == 0) + break; + + BUG_ON(host->num_sg == 0); + } - DBG("PIO transfer: %d bytes\n", bytes); + DBG("PIO transfer complete.\n"); } static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) { - u16 mode; + u8 count; + unsigned target_timeout, current_timeout; WARN_ON(host->data); - if (data == NULL) { - writew(0, host->ioaddr + SDHCI_TRANSFER_MODE); + if (data == NULL) return; - } DBG("blksz %04x blks %04x flags %08x\n", - 1 << data->blksz_bits, data->blocks, data->flags); + data->blksz, data->blocks, data->flags); DBG("tsac %d ms nsac %d clk\n", data->timeout_ns / 1000000, data->timeout_clks); - mode = SDHCI_TRNS_BLK_CNT_EN; - if (data->blocks > 1) - mode |= SDHCI_TRNS_MULTI; - if (data->flags & MMC_DATA_READ) - mode |= SDHCI_TRNS_READ; - if (host->flags & SDHCI_USE_DMA) - mode |= SDHCI_TRNS_DMA; + /* Sanity checks */ + BUG_ON(data->blksz * data->blocks > 524288); + BUG_ON(data->blksz > host->max_block); + BUG_ON(data->blocks > 65535); - writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); + /* timeout in us */ + target_timeout = data->timeout_ns / 1000 + + data->timeout_clks / host->clock; - writew(1 << data->blksz_bits, host->ioaddr + SDHCI_BLOCK_SIZE); - writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT); + /* + * Figure out needed cycles. + * We do this in steps in order to fit inside a 32 bit int. + * The first step is the minimum timeout, which will have a + * minimum resolution of 6 bits: + * (1) 2^13*1000 > 2^22, + * (2) host->timeout_clk < 2^16 + * => + * (1) / (2) > 2^6 + */ + count = 0; + current_timeout = (1 << 13) * 1000 / host->timeout_clk; + while (current_timeout < target_timeout) { + count++; + current_timeout <<= 1; + if (count >= 0xF) + break; + } + + if (count >= 0xF) { + printk(KERN_WARNING "%s: Too large timeout requested!\n", + mmc_hostname(host->mmc)); + count = 0xE; + } + + writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); if (host->flags & SDHCI_USE_DMA) { int count; @@ -294,7 +405,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS); } else { - host->size = (1 << data->blksz_bits) * data->blocks; + host->size = data->blksz * data->blocks; host->cur_sg = data->sg; host->num_sg = data->sg_len; @@ -302,12 +413,37 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) host->offset = 0; host->remain = host->cur_sg->length; } + + /* We do not handle DMA boundaries, so set it to max (512 KiB) */ + writew(SDHCI_MAKE_BLKSZ(7, data->blksz), + host->ioaddr + SDHCI_BLOCK_SIZE); + writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT); +} + +static void sdhci_set_transfer_mode(struct sdhci_host *host, + struct mmc_data *data) +{ + u16 mode; + + WARN_ON(host->data); + + if (data == NULL) + return; + + mode = SDHCI_TRNS_BLK_CNT_EN; + if (data->blocks > 1) + mode |= SDHCI_TRNS_MULTI; + if (data->flags & MMC_DATA_READ) + mode |= SDHCI_TRNS_READ; + if (host->flags & SDHCI_USE_DMA) + mode |= SDHCI_TRNS_DMA; + + writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); } static void sdhci_finish_data(struct sdhci_host *host) { struct mmc_data *data; - u32 intmask; u16 blocks; BUG_ON(!host->data); @@ -318,14 +454,6 @@ static void sdhci_finish_data(struct sdhci_host *host) if (host->flags & SDHCI_USE_DMA) { pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); - } else { - intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE); - intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL); - writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE); - - intmask = readl(host->ioaddr + SDHCI_INT_ENABLE); - intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL); - writel(intmask, host->ioaddr + SDHCI_INT_ENABLE); } /* @@ -335,16 +463,14 @@ static void sdhci_finish_data(struct sdhci_host *host) blocks = 0; else blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT); - data->bytes_xfered = (1 << data->blksz_bits) * (data->blocks - blocks); + data->bytes_xfered = data->blksz * (data->blocks - blocks); if ((data->error == MMC_ERR_NONE) && blocks) { printk(KERN_ERR "%s: Controller signalled completion even " "though there were blocks left. Please report this " "to " BUGMAIL ".\n", mmc_hostname(host->mmc)); data->error = MMC_ERR_FAILED; - } - - if (host->size != 0) { + } else if (host->size != 0) { printk(KERN_ERR "%s: %d bytes were left untransferred. " "Please report this to " BUGMAIL ".\n", mmc_hostname(host->mmc), host->size); @@ -371,27 +497,38 @@ static void sdhci_finish_data(struct sdhci_host *host) static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) { int flags; - u32 present; - unsigned long max_jiffies; + u32 mask; + unsigned long timeout; WARN_ON(host->cmd); DBG("Sending cmd (%x)\n", cmd->opcode); /* Wait max 10 ms */ - max_jiffies = jiffies + (HZ + 99)/100; - do { - if (time_after(jiffies, max_jiffies)) { + timeout = 10; + + mask = SDHCI_CMD_INHIBIT; + if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) + mask |= SDHCI_DATA_INHIBIT; + + /* We shouldn't wait for data inihibit for stop commands, even + though they might use busy signaling */ + if (host->mrq->data && (cmd == host->mrq->data->stop)) + mask &= ~SDHCI_DATA_INHIBIT; + + while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { + if (timeout == 0) { printk(KERN_ERR "%s: Controller never released " - "inhibit bits. Please report this to " + "inhibit bit(s). Please report this to " BUGMAIL ".\n", mmc_hostname(host->mmc)); sdhci_dumpregs(host); cmd->error = MMC_ERR_FAILED; tasklet_schedule(&host->finish_tasklet); return; } - present = readl(host->ioaddr + SDHCI_PRESENT_STATE); - } while (present & (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)); + timeout--; + mdelay(1); + } mod_timer(&host->timer, jiffies + 10 * HZ); @@ -401,6 +538,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT); + sdhci_set_transfer_mode(host, cmd->data); + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { printk(KERN_ERR "%s: Unsupported response type! " "Please report this to " BUGMAIL ".\n", @@ -456,31 +595,9 @@ static void sdhci_finish_command(struct sdhci_host *host) DBG("Ending cmd (%x)\n", host->cmd->opcode); - if (host->cmd->data) { - u32 intmask; - + if (host->cmd->data) host->data = host->cmd->data; - - if (!(host->flags & SDHCI_USE_DMA)) { - /* - * Don't enable the interrupts until now to make sure we - * get stable handling of the FIFO. - */ - intmask = readl(host->ioaddr + SDHCI_INT_ENABLE); - intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL; - writel(intmask, host->ioaddr + SDHCI_INT_ENABLE); - - intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE); - intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL; - writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE); - - /* - * The buffer interrupts are to unreliable so we - * start the transfer immediatly. - */ - sdhci_transfer_pio(host); - } - } else + else tasklet_schedule(&host->finish_tasklet); host->cmd = NULL; @@ -490,7 +607,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { int div; u16 clk; - unsigned long max_jiffies; + unsigned long timeout; if (clock == host->clock) return; @@ -511,17 +628,19 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL); /* Wait max 10 ms */ - max_jiffies = jiffies + (HZ + 99)/100; - do { - if (time_after(jiffies, max_jiffies)) { + timeout = 10; + while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { printk(KERN_ERR "%s: Internal clock never stabilised. " "Please report this to " BUGMAIL ".\n", mmc_hostname(host->mmc)); sdhci_dumpregs(host); return; } - clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL); - } while (!(clk & SDHCI_CLOCK_INT_STABLE)); + timeout--; + mdelay(1); + } clk |= SDHCI_CLOCK_CARD_EN; writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL); @@ -530,6 +649,46 @@ out: host->clock = clock; } +static void sdhci_set_power(struct sdhci_host *host, unsigned short power) +{ + u8 pwr; + + if (host->power == power) + return; + + writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); + + if (power == (unsigned short)-1) + goto out; + + pwr = SDHCI_POWER_ON; + + switch (power) { + case MMC_VDD_170: + case MMC_VDD_180: + case MMC_VDD_190: + pwr |= SDHCI_POWER_180; + break; + case MMC_VDD_290: + case MMC_VDD_300: + case MMC_VDD_310: + pwr |= SDHCI_POWER_300; + break; + case MMC_VDD_320: + case MMC_VDD_330: + case MMC_VDD_340: + pwr |= SDHCI_POWER_330; + break; + default: + BUG(); + } + + writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); + +out: + host->power = power; +} + /*****************************************************************************\ * * * MMC callbacks * @@ -576,17 +735,15 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) */ if (ios->power_mode == MMC_POWER_OFF) { writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE); - spin_unlock_irqrestore(&host->lock, flags); sdhci_init(host); - spin_lock_irqsave(&host->lock, flags); } sdhci_set_clock(host, ios->clock); if (ios->power_mode == MMC_POWER_OFF) - writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); + sdhci_set_power(host, -1); else - writeb(0xFF, host->ioaddr + SDHCI_POWER_CONTROL); + sdhci_set_power(host, ios->vdd); ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); if (ios->bus_width == MMC_BUS_WIDTH_4) @@ -679,6 +836,19 @@ static void sdhci_tasklet_finish(unsigned long param) if ((mrq->cmd->error != MMC_ERR_NONE) || (mrq->data && ((mrq->data->error != MMC_ERR_NONE) || (mrq->data->stop && (mrq->data->stop->error != MMC_ERR_NONE))))) { + + /* Some controllers need this kick or reset won't work here */ + if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { + unsigned int clock; + + /* This is to force an update */ + clock = host->clock; + host->clock = 0; + sdhci_set_clock(host, clock); + } + + /* Spec says we should do both at the same time, but Ricoh + controllers do not like that. */ sdhci_reset(host, SDHCI_RESET_CMD); sdhci_reset(host, SDHCI_RESET_DATA); } @@ -793,7 +963,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (host->data->error != MMC_ERR_NONE) sdhci_finish_data(host); else { - if (intmask & (SDHCI_INT_BUF_FULL | SDHCI_INT_BUF_EMPTY)) + if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) sdhci_transfer_pio(host); if (intmask & SDHCI_INT_DATA_END) @@ -818,50 +988,44 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id, struct pt_regs *regs) DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask); - if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) + if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { + writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE), + host->ioaddr + SDHCI_INT_STATUS); tasklet_schedule(&host->card_tasklet); + } - if (intmask & SDHCI_INT_CMD_MASK) { - sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); + intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE); + if (intmask & SDHCI_INT_CMD_MASK) { writel(intmask & SDHCI_INT_CMD_MASK, host->ioaddr + SDHCI_INT_STATUS); + sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); } if (intmask & SDHCI_INT_DATA_MASK) { - sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); - writel(intmask & SDHCI_INT_DATA_MASK, host->ioaddr + SDHCI_INT_STATUS); + sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK); } intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); - if (intmask & SDHCI_INT_CARD_INT) { - printk(KERN_ERR "%s: Unexpected card interrupt. Please " - "report this to " BUGMAIL ".\n", - mmc_hostname(host->mmc)); - sdhci_dumpregs(host); - } - if (intmask & SDHCI_INT_BUS_POWER) { - printk(KERN_ERR "%s: Unexpected bus power interrupt. Please " - "report this to " BUGMAIL ".\n", + printk(KERN_ERR "%s: Card is consuming too much power!\n", mmc_hostname(host->mmc)); - sdhci_dumpregs(host); + writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS); } - if (intmask & SDHCI_INT_ACMD12ERR) { - printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please " + intmask &= SDHCI_INT_BUS_POWER; + + if (intmask) { + printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please " "report this to " BUGMAIL ".\n", - mmc_hostname(host->mmc)); + mmc_hostname(host->mmc), intmask); sdhci_dumpregs(host); - writew(~0, host->ioaddr + SDHCI_ACMD12_ERR); - } - - if (intmask) writel(intmask, host->ioaddr + SDHCI_INT_STATUS); + } result = IRQ_HANDLED; @@ -954,6 +1118,7 @@ static int sdhci_resume (struct pci_dev *pdev) static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) { int ret; + unsigned int version; struct sdhci_chip *chip; struct mmc_host *mmc; struct sdhci_host *host; @@ -985,6 +1150,16 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) return -ENODEV; } + if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { + printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n"); + return -ENODEV; + } + + if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) { + printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n"); + return -ENODEV; + } + mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev); if (!mmc) return -ENOMEM; @@ -1012,9 +1187,32 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) goto release; } + sdhci_reset(host, SDHCI_RESET_ALL); + + version = readw(host->ioaddr + SDHCI_HOST_VERSION); + version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; + if (version != 0) { + printk(KERN_ERR "%s: Unknown controller version (%d). " + "Cowardly refusing to continue.\n", host->slot_descr, + version); + ret = -ENODEV; + goto unmap; + } + caps = readl(host->ioaddr + SDHCI_CAPABILITIES); - if ((caps & SDHCI_CAN_DO_DMA) && ((pdev->class & 0x0000FF) == 0x01)) + if (debug_nodma) + DBG("DMA forced off\n"); + else if (debug_forcedma) { + DBG("DMA forced on\n"); + host->flags |= SDHCI_USE_DMA; + } else if (chip->quirks & SDHCI_QUIRK_FORCE_DMA) + host->flags |= SDHCI_USE_DMA; + else if ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) + DBG("Controller doesn't have DMA interface\n"); + else if (!(caps & SDHCI_CAN_DO_DMA)) + DBG("Controller doesn't have DMA capability\n"); + else host->flags |= SDHCI_USE_DMA; if (host->flags & SDHCI_USE_DMA) { @@ -1030,18 +1228,59 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) else /* XXX: Hack to get MMC layer to avoid highmem */ pdev->dma_mask = 0; - host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; + host->max_clk = + (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; + if (host->max_clk == 0) { + printk(KERN_ERR "%s: Hardware doesn't specify base clock " + "frequency.\n", host->slot_descr); + ret = -ENODEV; + goto unmap; + } host->max_clk *= 1000000; + host->timeout_clk = + (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; + if (host->timeout_clk == 0) { + printk(KERN_ERR "%s: Hardware doesn't specify timeout clock " + "frequency.\n", host->slot_descr); + ret = -ENODEV; + goto unmap; + } + if (caps & SDHCI_TIMEOUT_CLK_UNIT) + host->timeout_clk *= 1000; + + host->max_block = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT; + if (host->max_block >= 3) { + printk(KERN_ERR "%s: Invalid maximum block size.\n", + host->slot_descr); + ret = -ENODEV; + goto unmap; + } + host->max_block = 512 << host->max_block; + /* * Set host parameters. */ mmc->ops = &sdhci_ops; mmc->f_min = host->max_clk / 256; mmc->f_max = host->max_clk; - mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; mmc->caps = MMC_CAP_4_BIT_DATA; + mmc->ocr_avail = 0; + if (caps & SDHCI_CAN_VDD_330) + mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34; + else if (caps & SDHCI_CAN_VDD_300) + mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31; + else if (caps & SDHCI_CAN_VDD_180) + mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19; + + if (mmc->ocr_avail == 0) { + printk(KERN_ERR "%s: Hardware doesn't report any " + "support voltages.\n", host->slot_descr); + ret = -ENODEV; + goto unmap; + } + spin_lock_init(&host->lock); /* @@ -1054,10 +1293,10 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) mmc->max_phys_segs = 16; /* - * Maximum number of sectors in one transfer. Limited by sector - * count register. + * Maximum number of sectors in one transfer. Limited by DMA boundary + * size (512KiB), which means (512 KiB/512=) 1024 entries. */ - mmc->max_sectors = 0x3FFF; + mmc->max_sectors = 1024; /* * Maximum segment size. Could be one segment with the maximum number @@ -1073,12 +1312,12 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) tasklet_init(&host->finish_tasklet, sdhci_tasklet_finish, (unsigned long)host); - setup_timer(&host->timer, sdhci_timeout_timer, (int)host); + setup_timer(&host->timer, sdhci_timeout_timer, (long)host); - ret = request_irq(host->irq, sdhci_irq, SA_SHIRQ, + ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, host->slot_descr, host); if (ret) - goto unmap; + goto untasklet; sdhci_init(host); @@ -1097,10 +1336,10 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) return 0; -unmap: +untasklet: tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); - +unmap: iounmap(host->ioaddr); release: pci_release_region(pdev, host->bar); @@ -1144,13 +1383,18 @@ static int __devinit sdhci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret, i; - u8 slots; + u8 slots, rev; struct sdhci_chip *chip; BUG_ON(pdev == NULL); BUG_ON(ent == NULL); - DBG("found at %s\n", pci_name(pdev)); + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); + + printk(KERN_INFO DRIVER_NAME + ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n", + pci_name(pdev), (int)pdev->vendor, (int)pdev->device, + (int)rev); ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); if (ret) @@ -1173,6 +1417,10 @@ static int __devinit sdhci_probe(struct pci_dev *pdev, } chip->pdev = pdev; + chip->quirks = ent->driver_data; + + if (debug_quirks) + chip->quirks = debug_quirks; chip->num_slots = slots; pci_set_drvdata(pdev, chip); @@ -1251,7 +1499,15 @@ static void __exit sdhci_drv_exit(void) module_init(sdhci_drv_init); module_exit(sdhci_drv_exit); +module_param(debug_nodma, uint, 0444); +module_param(debug_forcedma, uint, 0444); +module_param(debug_quirks, uint, 0444); + MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver"); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); + +MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers. (default 0)"); +MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers. (default 0)"); +MODULE_PARM_DESC(debug_quirks, "Force certain quirks."); diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h index 3b270ef486b..f2453343f78 100644 --- a/drivers/mmc/sdhci.h +++ b/drivers/mmc/sdhci.h @@ -12,6 +12,10 @@ * PCI registers */ +#define PCI_SDHCI_IFPIO 0x00 +#define PCI_SDHCI_IFDMA 0x01 +#define PCI_SDHCI_IFVENDOR 0x02 + #define PCI_SLOT_INFO 0x40 /* 8 bits */ #define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) #define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 @@ -23,6 +27,7 @@ #define SDHCI_DMA_ADDRESS 0x00 #define SDHCI_BLOCK_SIZE 0x04 +#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) #define SDHCI_BLOCK_COUNT 0x06 @@ -67,6 +72,10 @@ #define SDHCI_CTRL_4BITBUS 0x02 #define SDHCI_POWER_CONTROL 0x29 +#define SDHCI_POWER_ON 0x01 +#define SDHCI_POWER_180 0x0A +#define SDHCI_POWER_300 0x0C +#define SDHCI_POWER_330 0x0E #define SDHCI_BLOCK_GAP_CONTROL 0x2A @@ -91,8 +100,8 @@ #define SDHCI_INT_RESPONSE 0x00000001 #define SDHCI_INT_DATA_END 0x00000002 #define SDHCI_INT_DMA_END 0x00000008 -#define SDHCI_INT_BUF_EMPTY 0x00000010 -#define SDHCI_INT_BUF_FULL 0x00000020 +#define SDHCI_INT_SPACE_AVAIL 0x00000010 +#define SDHCI_INT_DATA_AVAIL 0x00000020 #define SDHCI_INT_CARD_INSERT 0x00000040 #define SDHCI_INT_CARD_REMOVE 0x00000080 #define SDHCI_INT_CARD_INT 0x00000100 @@ -112,7 +121,7 @@ #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ - SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL | \ + SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ SDHCI_INT_DATA_END_BIT) @@ -121,9 +130,17 @@ /* 3E-3F reserved */ #define SDHCI_CAPABILITIES 0x40 -#define SDHCI_CAN_DO_DMA 0x00400000 +#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F +#define SDHCI_TIMEOUT_CLK_SHIFT 0 +#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 #define SDHCI_CLOCK_BASE_MASK 0x00003F00 #define SDHCI_CLOCK_BASE_SHIFT 8 +#define SDHCI_MAX_BLOCK_MASK 0x00030000 +#define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_DMA 0x00400000 +#define SDHCI_CAN_VDD_330 0x01000000 +#define SDHCI_CAN_VDD_300 0x02000000 +#define SDHCI_CAN_VDD_180 0x04000000 /* 44-47 reserved for more caps */ @@ -136,6 +153,10 @@ #define SDHCI_SLOT_INT_STATUS 0xFC #define SDHCI_HOST_VERSION 0xFE +#define SDHCI_VENDOR_VER_MASK 0xFF00 +#define SDHCI_VENDOR_VER_SHIFT 8 +#define SDHCI_SPEC_VER_MASK 0x00FF +#define SDHCI_SPEC_VER_SHIFT 0 struct sdhci_chip; @@ -149,8 +170,11 @@ struct sdhci_host { #define SDHCI_USE_DMA (1<<0) unsigned int max_clk; /* Max possible freq (MHz) */ + unsigned int timeout_clk; /* Timeout freq (KHz) */ + unsigned int max_block; /* Max block size (bytes) */ unsigned int clock; /* Current clock (MHz) */ + unsigned short power; /* Current voltage */ struct mmc_request *mrq; /* Current request */ struct mmc_command *cmd; /* Current command */ @@ -180,6 +204,8 @@ struct sdhci_host { struct sdhci_chip { struct pci_dev *pdev; + unsigned long quirks; + int num_slots; /* Slots on controller */ struct sdhci_host *hosts[0]; /* Pointers to hosts */ }; diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 8167332d401..8a30ef3ae41 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -21,7 +21,6 @@ * - On APIC systems the FIFO empty interrupt is sometimes lost. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -1554,7 +1553,7 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) * Allocate interrupt. */ - ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host); + ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); if (ret) return ret; |