diff options
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/card/block.c | 76 |
1 files changed, 59 insertions, 17 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index cc9b3abf4a3..45b1f430685 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -229,7 +229,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret = 1; + int ret = 1, disable_multi = 0; mmc_claim_host(card->host); @@ -251,6 +251,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; brq.data.blocks = req->nr_sectors; + /* + * After a read error, we redo the request one sector at a time + * in order to accurately determine which sectors can be read + * successfully. + */ + if (disable_multi && brq.data.blocks > 1) + brq.data.blocks = 1; + if (brq.data.blocks > 1) { /* SPI multiblock writes terminate using a special * token, not a STOP_TRANSMISSION request. @@ -279,6 +287,25 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.sg = mq->sg; brq.data.sg_len = mmc_queue_map_sg(mq); + /* + * Adjust the sg list so it is the same size as the + * request. + */ + if (brq.data.blocks != req->nr_sectors) { + int i, data_size = brq.data.blocks << 9; + struct scatterlist *sg; + + for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { + data_size -= sg->length; + if (data_size <= 0) { + sg->length += data_size; + i++; + break; + } + } + brq.data.sg_len = i; + } + mmc_queue_bounce_pre(mq); mmc_wait_for_req(card->host, &brq.mrq); @@ -290,8 +317,16 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) * until later as we need to wait for the card to leave * programming mode even when things go wrong. */ - if (brq.cmd.error || brq.data.error || brq.stop.error) + if (brq.cmd.error || brq.data.error || brq.stop.error) { + if (brq.data.blocks > 1 && rq_data_dir(req) == READ) { + /* Redo read one sector at a time */ + printk(KERN_WARNING "%s: retrying using single " + "block read\n", req->rq_disk->disk_name); + disable_multi = 1; + continue; + } status = get_card_status(card, req); + } if (brq.cmd.error) { printk(KERN_ERR "%s: error %d sending read/write " @@ -348,8 +383,20 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) #endif } - if (brq.cmd.error || brq.data.error || brq.stop.error) + if (brq.cmd.error || brq.stop.error || brq.data.error) { + if (rq_data_dir(req) == READ) { + /* + * After an error, we redo I/O one sector at a + * time, so we only reach here after trying to + * read a single sector. + */ + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, -EIO, brq.data.blksz); + spin_unlock_irq(&md->lock); + continue; + } goto cmd_err; + } /* * A block was successfully transferred. @@ -371,25 +418,20 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) * If the card is not SD, we can still ok written sectors * as reported by the controller (which might be less than * the real number of written sectors, but never more). - * - * For reads we just fail the entire chunk as that should - * be safe in all cases. */ - if (rq_data_dir(req) != READ) { - if (mmc_card_sd(card)) { - u32 blocks; + if (mmc_card_sd(card)) { + u32 blocks; - blocks = mmc_sd_num_wr_blocks(card); - if (blocks != (u32)-1) { - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, blocks << 9); - spin_unlock_irq(&md->lock); - } - } else { + blocks = mmc_sd_num_wr_blocks(card); + if (blocks != (u32)-1) { spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq.data.bytes_xfered); + ret = __blk_end_request(req, 0, blocks << 9); spin_unlock_irq(&md->lock); } + } else { + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, 0, brq.data.bytes_xfered); + spin_unlock_irq(&md->lock); } mmc_release_host(card->host); |