diff options
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r-- | drivers/mmc/host/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/omap.c | 10 | ||||
-rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 8 | ||||
-rw-r--r-- | drivers/mmc/host/pxamci.c | 14 | ||||
-rw-r--r-- | drivers/mmc/host/s3cmci.c | 2 |
6 files changed, 20 insertions, 18 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 432ae8358c8..e04b751680d 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -329,7 +329,7 @@ config MMC_SDRICOH_CS config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" - depends on MFD_TMIO || MFD_ASIC3 + depends on MFD_TMIO || MFD_ASIC3 || SUPERH help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also HTC ASIC3 diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 705a5894a6b..90d168ad03b 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } - if (host->hw_designer == 0x80) + if (host->hw_designer == AMBA_VENDOR_ST) clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; /* This hasn't proven to be worthwhile */ diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index b8fd7af1cee..5f970e253e5 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -30,12 +30,12 @@ #include <asm/io.h> #include <asm/irq.h> -#include <mach/board.h> -#include <mach/mmc.h> +#include <plat/board.h> +#include <plat/mmc.h> #include <mach/gpio.h> -#include <mach/dma.h> -#include <mach/mux.h> -#include <mach/fpga.h> +#include <plat/dma.h> +#include <plat/mux.h> +#include <plat/fpga.h> #define OMAP_MMC_REG_CMD 0x00 #define OMAP_MMC_REG_ARGL 0x04 diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 0aecaaebef3..4b232251890 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -30,11 +30,11 @@ #include <linux/mmc/core.h> #include <linux/io.h> #include <linux/semaphore.h> -#include <mach/dma.h> +#include <plat/dma.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/mmc.h> -#include <mach/cpu.h> +#include <plat/board.h> +#include <plat/mmc.h> +#include <plat/cpu.h> /* OMAP HSMMC Host Controller Registers */ #define OMAP_HSMMC_SYSCONFIG 0x0010 diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index b00d6731905..bb47ff465c0 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -43,6 +43,9 @@ #define NR_SG 1 #define CLKRT_OFF (~0) +#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \ + || cpu_is_pxa935()) + struct pxamci_host { struct mmc_host *mmc; spinlock_t lock; @@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk_enable(host->clk); if (ios->clock == 26000000) { - /* to support 26MHz on pxa300/pxa310 */ + /* to support 26MHz */ host->clkrt = 7; } else { /* to handle (19.5MHz, 26MHz) */ @@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev) * Calculate minimum clock rate, rounding up. */ mmc->f_min = (host->clkrate + 63) / 64; - mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 - : host->clkrate; + mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate; pxamci_init_ocr(host); @@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev) if (!cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; - if (cpu_is_pxa300() || cpu_is_pxa310()) + if (mmc_has_26MHz()) mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; } @@ -760,6 +762,8 @@ static int pxamci_remove(struct platform_device *pdev) if (mmc) { struct pxamci_host *host = mmc_priv(mmc); + mmc_remove_host(mmc); + if (host->pdata) { gpio_cd = host->pdata->gpio_card_detect; gpio_ro = host->pdata->gpio_card_ro; @@ -779,8 +783,6 @@ static int pxamci_remove(struct platform_device *pdev) if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); - mmc_remove_host(mmc); - pxamci_stop_clock(host); writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD| END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 99b74a35102..941a4d35ef8 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1360,7 +1360,7 @@ static struct mmc_host_ops s3cmci_ops = { static struct s3c24xx_mci_pdata s3cmci_def_pdata = { /* This is currently here to avoid a number of if (host->pdata) - * checks. Any zero fields to ensure reaonable defaults are picked. */ + * checks. Any zero fields to ensure reasonable defaults are picked. */ }; #ifdef CONFIG_CPU_FREQ |