diff options
Diffstat (limited to 'drivers/mmc/host/atmel-mci.c')
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 42 |
1 files changed, 38 insertions, 4 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 7b603e4b41d..fc25586b7ee 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -30,6 +30,7 @@ #include <asm/io.h> #include <asm/unaligned.h> +#include <mach/cpu.h> #include <mach/board.h> #include "atmel-mci-regs.h" @@ -210,6 +211,18 @@ struct atmel_mci_slot { set_bit(event, &host->pending_events) /* + * Enable or disable features/registers based on + * whether the processor supports them + */ +static bool mci_has_rwproof(void) +{ + if (cpu_is_at91sam9261() || cpu_is_at91rm9200()) + return false; + else + return true; +} + +/* * The debugfs stuff below is mostly optimized away when * CONFIG_DEBUG_FS is not set. */ @@ -276,8 +289,13 @@ static void atmci_show_status_reg(struct seq_file *s, [3] = "BLKE", [4] = "DTIP", [5] = "NOTBUSY", + [6] = "ENDRX", + [7] = "ENDTX", [8] = "SDIOIRQA", [9] = "SDIOIRQB", + [12] = "SDIOWAIT", + [14] = "RXBUFF", + [15] = "TXBUFE", [16] = "RINDE", [17] = "RDIRE", [18] = "RCRCE", @@ -285,6 +303,11 @@ static void atmci_show_status_reg(struct seq_file *s, [20] = "RTOE", [21] = "DCRCE", [22] = "DTOE", + [23] = "CSTOE", + [24] = "BLKOVRE", + [25] = "DMADONE", + [26] = "FIFOEMPTY", + [27] = "XFRDONE", [30] = "OVRE", [31] = "UNRE", }; @@ -576,6 +599,7 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) struct scatterlist *sg; unsigned int i; enum dma_data_direction direction; + unsigned int sglen; /* * We don't do DMA on "complex" transfers, i.e. with @@ -605,11 +629,14 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) else direction = DMA_TO_DEVICE; + sglen = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, direction); + if (sglen != data->sg_len) + goto unmap_exit; desc = chan->device->device_prep_slave_sg(chan, data->sg, data->sg_len, direction, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) - return -ENOMEM; + goto unmap_exit; host->dma.data_desc = desc; desc->callback = atmci_dma_complete; @@ -620,6 +647,9 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) chan->device->device_issue_pending(chan); return 0; +unmap_exit: + dma_unmap_sg(&host->pdev->dev, data->sg, sglen, direction); + return -ENOMEM; } #else /* CONFIG_MMC_ATMELMCI_DMA */ @@ -849,13 +879,15 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clkdiv = 255; } + host->mode_reg = MCI_MR_CLKDIV(clkdiv); + /* * WRPROOF and RDPROOF prevent overruns/underruns by * stopping the clock when the FIFO is full/empty. * This state is not expected to last for long. */ - host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF - | MCI_MR_RDPROOF; + if (mci_has_rwproof()) + host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF); if (list_empty(&host->queue)) mci_writel(host, MR, host->mode_reg); @@ -1648,8 +1680,10 @@ static int __init atmci_probe(struct platform_device *pdev) nr_slots++; } - if (!nr_slots) + if (!nr_slots) { + dev_err(&pdev->dev, "init failed: no slot defined\n"); goto err_init_slot; + } dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", |