diff options
Diffstat (limited to 'drivers/mmc/core/sdio.c')
-rw-r--r-- | drivers/mmc/core/sdio.c | 342 |
1 files changed, 316 insertions, 26 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 3ab565e32a6..bd7bacc950d 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -14,6 +14,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/sdio.h> #include <linux/mmc/sdio_func.h> #include <linux/mmc/sdio_ids.h> @@ -102,6 +103,7 @@ static int sdio_read_cccr(struct mmc_card *card) int ret; int cccr_vsn; unsigned char data; + unsigned char speed; memset(&card->cccr, 0, sizeof(struct sdio_cccr)); @@ -140,12 +142,60 @@ static int sdio_read_cccr(struct mmc_card *card) } if (cccr_vsn >= SDIO_CCCR_REV_1_20) { - ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &data); + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); if (ret) goto out; - if (data & SDIO_SPEED_SHS) - card->cccr.high_speed = 1; + card->scr.sda_spec3 = 0; + card->sw_caps.sd3_bus_mode = 0; + card->sw_caps.sd3_drv_type = 0; + if (cccr_vsn >= SDIO_CCCR_REV_3_00) { + card->scr.sda_spec3 = 1; + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_UHS, 0, &data); + if (ret) + goto out; + + if (card->host->caps & + (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_DDR50)) { + if (data & SDIO_UHS_DDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_DDR50; + + if (data & SDIO_UHS_SDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR50; + + if (data & SDIO_UHS_SDR104) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR104; + } + + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_DRIVE_STRENGTH, 0, &data); + if (ret) + goto out; + + if (data & SDIO_DRIVE_SDTA) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A; + if (data & SDIO_DRIVE_SDTC) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; + if (data & SDIO_DRIVE_SDTD) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; + } + + /* if no uhs mode ensure we check for high speed */ + if (!card->sw_caps.sd3_bus_mode) { + if (speed & SDIO_SPEED_SHS) { + card->cccr.high_speed = 1; + card->sw_caps.hs_max_dtr = 50000000; + } else { + card->cccr.high_speed = 0; + card->sw_caps.hs_max_dtr = 25000000; + } + } } out: @@ -327,6 +377,194 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) return max_dtr; } +static unsigned char host_drive_to_sdio_drive(int host_strength) +{ + switch (host_strength) { + case MMC_SET_DRIVER_TYPE_A: + return SDIO_DTSx_SET_TYPE_A; + case MMC_SET_DRIVER_TYPE_B: + return SDIO_DTSx_SET_TYPE_B; + case MMC_SET_DRIVER_TYPE_C: + return SDIO_DTSx_SET_TYPE_C; + case MMC_SET_DRIVER_TYPE_D: + return SDIO_DTSx_SET_TYPE_D; + default: + return SDIO_DTSx_SET_TYPE_B; + } +} + +static void sdio_select_driver_type(struct mmc_card *card) +{ + int host_drv_type = SD_DRIVER_TYPE_B; + int card_drv_type = SD_DRIVER_TYPE_B; + int drive_strength; + unsigned char card_strength; + int err; + + /* + * If the host doesn't support any of the Driver Types A,C or D, + * or there is no board specific handler then default Driver + * Type B is used. + */ + if (!(card->host->caps & + (MMC_CAP_DRIVER_TYPE_A | + MMC_CAP_DRIVER_TYPE_C | + MMC_CAP_DRIVER_TYPE_D))) + return; + + if (!card->host->ops->select_drive_strength) + return; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type |= SD_DRIVER_TYPE_A; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type |= SD_DRIVER_TYPE_C; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) + card_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + drive_strength = card->host->ops->select_drive_strength( + card->sw_caps.uhs_max_dtr, + host_drv_type, card_drv_type); + + /* if error just use default for drive strength B */ + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0, + &card_strength); + if (err) + return; + + card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT); + card_strength |= host_drive_to_sdio_drive(drive_strength); + + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH, + card_strength, NULL); + + /* if error default to drive strength B */ + if (!err) + mmc_set_driver_type(card->host, drive_strength); +} + + +static int sdio_set_bus_speed_mode(struct mmc_card *card) +{ + unsigned int bus_speed, timing; + int err; + unsigned char speed; + + /* + * If the host doesn't support any of the UHS-I modes, fallback on + * default speed. + */ + if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) + return 0; + + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + if ((card->host->caps & MMC_CAP_UHS_SDR104) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { + bus_speed = SDIO_SPEED_SDR104; + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { + bus_speed = SDIO_SPEED_DDR50; + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR50)) { + bus_speed = SDIO_SPEED_SDR50; + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { + bus_speed = SDIO_SPEED_SDR25; + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR12)) { + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + } + + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (err) + return err; + + speed &= ~SDIO_SPEED_BSS_MASK; + speed |= bus_speed; + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); + if (err) + return err; + + if (bus_speed) { + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr); + } + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sdio_init_uhs_card(struct mmc_card *card) +{ + int err; + + if (!card->scr.sda_spec3) + return 0; + + /* + * Switch to wider bus (if supported). + */ + if (card->host->caps & MMC_CAP_4_BIT_DATA) { + err = sdio_enable_4bit_bus(card); + if (err > 0) { + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + err = 0; + } + } + + /* Set the driver strength for the card */ + sdio_select_driver_type(card); + + /* Set bus speed mode of the card */ + err = sdio_set_bus_speed_mode(card); + if (err) + goto out; + + /* Initialize and start re-tuning timer */ + if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK); + +out: + + return err; +} + /* * Handle the detection and initialisation of a card. * @@ -394,6 +632,30 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, host->ops->init_card(host, card); /* + * If the host and card support UHS-I mode request the card + * to switch to 1.8V signaling level. No 1.8v signalling if + * UHS mode is not enabled to maintain compatibilty and some + * systems that claim 1.8v signalling in fact do not support + * it. + */ + if ((ocr & R4_18V_PRESENT) && + (host->caps & + (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_DDR50))) { + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, + true); + if (err) { + ocr &= ~R4_18V_PRESENT; + host->ocr &= ~R4_18V_PRESENT; + } + err = 0; + } else { + ocr &= ~R4_18V_PRESENT; + host->ocr &= ~R4_18V_PRESENT; + } + + /* * For native busses: set card RCA and quit open drain mode. */ if (!powered_resume && !mmc_host_is_spi(host)) { @@ -492,29 +754,39 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, if (err) goto remove; - /* - * Switch to high-speed (if supported). - */ - err = sdio_enable_hs(card); - if (err > 0) - mmc_sd_go_highspeed(card); - else if (err) - goto remove; + /* Initialization sequence for UHS-I cards */ + /* Only if card supports 1.8v and UHS signaling */ + if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) { + err = mmc_sdio_init_uhs_card(card); + if (err) + goto remove; - /* - * Change to the card's maximum speed. - */ - mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + /* Card is an ultra-high-speed card */ + mmc_card_set_uhs(card); + } else { + /* + * Switch to high-speed (if supported). + */ + err = sdio_enable_hs(card); + if (err > 0) + mmc_sd_go_highspeed(card); + else if (err) + goto remove; - /* - * Switch to wider bus (if supported). - */ - err = sdio_enable_4bit_bus(card); - if (err > 0) - mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); - else if (err) - goto remove; + /* + * Change to the card's maximum speed. + */ + mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + /* + * Switch to wider bus (if supported). + */ + err = sdio_enable_4bit_bus(card); + if (err > 0) + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + else if (err) + goto remove; + } finish: if (!oldcard) host->card = card; @@ -550,6 +822,14 @@ static void mmc_sdio_remove(struct mmc_host *host) } /* + * Card detection - card is alive. + */ +static int mmc_sdio_alive(struct mmc_host *host) +{ + return mmc_select_card(host->card); +} + +/* * Card detection callback from host. */ static void mmc_sdio_detect(struct mmc_host *host) @@ -571,7 +851,7 @@ static void mmc_sdio_detect(struct mmc_host *host) /* * Just check if our card has been removed. */ - err = mmc_select_card(host->card); + err = _mmc_detect_card_removed(host); mmc_release_host(host); @@ -749,6 +1029,7 @@ static const struct mmc_bus_ops mmc_sdio_ops = { .suspend = mmc_sdio_suspend, .resume = mmc_sdio_resume, .power_restore = mmc_sdio_power_restore, + .alive = mmc_sdio_alive, }; @@ -797,8 +1078,17 @@ int mmc_attach_sdio(struct mmc_host *host) * Detect and init the card. */ err = mmc_sdio_init_card(host, host->ocr, NULL, 0); - if (err) - goto err; + if (err) { + if (err == -EAGAIN) { + /* + * Retry initialization with S18R set to 0. + */ + host->ocr &= ~R4_18V_PRESENT; + err = mmc_sdio_init_card(host, host->ocr, NULL, 0); + } + if (err) + goto err; + } card = host->card; /* |