1 files changed, 168 insertions, 42 deletions

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index b9dee28ee7d..bd2755e8d9a 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -18,6 +18,7 @@
 
 #include "core.h"
 #include "bus.h"
+#include "sd.h"
 #include "sdio_bus.h"
 #include "mmc_ops.h"
 #include "sd_ops.h"
@@ -62,13 +63,19 @@ static int sdio_init_func(struct mmc_card *card, unsigned int fn)
 
 	func->num = fn;
 
-	ret = sdio_read_fbr(func);
-	if (ret)
-		goto fail;
+	if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
+		ret = sdio_read_fbr(func);
+		if (ret)
+			goto fail;
 
-	ret = sdio_read_func_cis(func);
-	if (ret)
-		goto fail;
+		ret = sdio_read_func_cis(func);
+		if (ret)
+			goto fail;
+	} else {
+		func->vendor = func->card->cis.vendor;
+		func->device = func->card->cis.device;
+		func->max_blksize = func->card->cis.blksize;
+	}
 
 	card->sdio_func[fn - 1] = func;
 
@@ -159,9 +166,7 @@ static int sdio_enable_wide(struct mmc_card *card)
 	if (ret)
 		return ret;
 
-	mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
-
-	return 0;
+	return 1;
 }
 
 /*
@@ -221,10 +226,34 @@ static int sdio_disable_wide(struct mmc_card *card)
 	return 0;
 }
 
+
+static int sdio_enable_4bit_bus(struct mmc_card *card)
+{
+	int err;
+
+	if (card->type == MMC_TYPE_SDIO)
+		return sdio_enable_wide(card);
+
+	if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
+		(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+		err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+		if (err)
+			return err;
+	} else
+		return 0;
+
+	err = sdio_enable_wide(card);
+	if (err <= 0)
+		mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
+
+	return err;
+}
+
+
 /*
  * Test if the card supports high-speed mode and, if so, switch to it.
  */
-static int sdio_enable_hs(struct mmc_card *card)
+static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
 {
 	int ret;
 	u8 speed;
@@ -239,16 +268,56 @@ static int sdio_enable_hs(struct mmc_card *card)
 	if (ret)
 		return ret;
 
-	speed |= SDIO_SPEED_EHS;
+	if (enable)
+		speed |= SDIO_SPEED_EHS;
+	else
+		speed &= ~SDIO_SPEED_EHS;
 
 	ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
 	if (ret)
 		return ret;
 
-	mmc_card_set_highspeed(card);
-	mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+	return 1;
+}
 
-	return 0;
+/*
+ * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
+ */
+static int sdio_enable_hs(struct mmc_card *card)
+{
+	int ret;
+
+	ret = mmc_sdio_switch_hs(card, true);
+	if (ret <= 0 || card->type == MMC_TYPE_SDIO)
+		return ret;
+
+	ret = mmc_sd_switch_hs(card);
+	if (ret <= 0)
+		mmc_sdio_switch_hs(card, false);
+
+	return ret;
+}
+
+static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
+{
+	unsigned max_dtr;
+
+	if (mmc_card_highspeed(card)) {
+		/*
+		 * The SDIO specification doesn't mention how
+		 * the CIS transfer speed register relates to
+		 * high-speed, but it seems that 50 MHz is
+		 * mandatory.
+		 */
+		max_dtr = 50000000;
+	} else {
+		max_dtr = card->cis.max_dtr;
+	}
+
+	if (card->type == MMC_TYPE_SD_COMBO)
+		max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
+
+	return max_dtr;
 }
 
 /*
@@ -293,7 +362,24 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		goto err;
 	}
 
-	card->type = MMC_TYPE_SDIO;
+	err = mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid);
+
+	if (!err) {
+		card->type = MMC_TYPE_SD_COMBO;
+
+		if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
+		    memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
+			mmc_remove_card(card);
+			return -ENOENT;
+		}
+	} else {
+		card->type = MMC_TYPE_SDIO;
+
+		if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
+			mmc_remove_card(card);
+			return -ENOENT;
+		}
+	}
 
 	/*
 	 * Call the optional HC's init_card function to handle quirks.
@@ -313,6 +399,17 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
+	 * Read CSD, before selecting the card
+	 */
+	if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
+		err = mmc_sd_get_csd(host, card);
+		if (err)
+			return err;
+
+		mmc_decode_cid(card);
+	}
+
+	/*
 	 * Select card, as all following commands rely on that.
 	 */
 	if (!powered_resume && !mmc_host_is_spi(host)) {
@@ -321,6 +418,23 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 			goto remove;
 	}
 
+	if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
+		/*
+		 * This is non-standard SDIO device, meaning it doesn't
+		 * have any CIA (Common I/O area) registers present.
+		 * It's host's responsibility to fill cccr and cis
+		 * structures in init_card().
+		 */
+		mmc_set_clock(host, card->cis.max_dtr);
+
+		if (card->cccr.high_speed) {
+			mmc_card_set_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+		}
+
+		goto finish;
+	}
+
 	/*
 	 * Read the common registers.
 	 */
@@ -339,43 +453,57 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		int same = (card->cis.vendor == oldcard->cis.vendor &&
 			    card->cis.device == oldcard->cis.device);
 		mmc_remove_card(card);
-		if (!same) {
-			err = -ENOENT;
-			goto err;
-		}
+		if (!same)
+			return -ENOENT;
+
 		card = oldcard;
 		return 0;
 	}
 
+	if (card->type == MMC_TYPE_SD_COMBO) {
+		err = mmc_sd_setup_card(host, card, oldcard != NULL);
+		/* handle as SDIO-only card if memory init failed */
+		if (err) {
+			mmc_go_idle(host);
+			if (mmc_host_is_spi(host))
+				/* should not fail, as it worked previously */
+				mmc_spi_set_crc(host, use_spi_crc);
+			card->type = MMC_TYPE_SDIO;
+		} else
+			card->dev.type = &sd_type;
+	}
+
+	/*
+	 * If needed, disconnect card detection pull-up resistor.
+	 */
+	err = sdio_disable_cd(card);
+	if (err)
+		goto remove;
+
 	/*
 	 * Switch to high-speed (if supported).
 	 */
 	err = sdio_enable_hs(card);
-	if (err)
+	if (err > 0)
+		mmc_sd_go_highspeed(card);
+	else if (err)
 		goto remove;
 
 	/*
 	 * Change to the card's maximum speed.
 	 */
-	if (mmc_card_highspeed(card)) {
-		/*
-		 * The SDIO specification doesn't mention how
-		 * the CIS transfer speed register relates to
-		 * high-speed, but it seems that 50 MHz is
-		 * mandatory.
-		 */
-		mmc_set_clock(host, 50000000);
-	} else {
-		mmc_set_clock(host, card->cis.max_dtr);
-	}
+	mmc_set_clock(host, mmc_sdio_get_max_clock(card));
 
 	/*
 	 * Switch to wider bus (if supported).
 	 */
-	err = sdio_enable_wide(card);
-	if (err)
+	err = sdio_enable_4bit_bus(card);
+	if (err > 0)
+		mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+	else if (err)
 		goto remove;
 
+finish:
 	if (!oldcard)
 		host->card = card;
 	return 0;
@@ -487,9 +615,14 @@ static int mmc_sdio_resume(struct mmc_host *host)
 	mmc_claim_host(host);
 	err = mmc_sdio_init_card(host, host->ocr, host->card,
 				 (host->pm_flags & MMC_PM_KEEP_POWER));
-	if (!err)
+	if (!err) {
 		/* We may have switched to 1-bit mode during suspend. */
-		err = sdio_enable_wide(host->card);
+		err = sdio_enable_4bit_bus(host->card);
+		if (err > 0) {
+			mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+			err = 0;
+		}
+	}
 	if (!err && host->sdio_irqs)
 		mmc_signal_sdio_irq(host);
 	mmc_release_host(host);
@@ -574,13 +707,6 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	card->sdio_funcs = 0;
 
 	/*
-	 * If needed, disconnect card detection pull-up resistor.
-	 */
-	err = sdio_disable_cd(card);
-	if (err)
-		goto remove;
-
-	/*
 	 * Initialize (but don't add) all present functions.
 	 */
 	for (i = 0; i < funcs; i++, card->sdio_funcs++) {