diff options
Diffstat (limited to 'drivers/mmc/core/mmc.c')
-rw-r--r-- | drivers/mmc/core/mmc.c | 203 |
1 files changed, 188 insertions, 15 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index d240427c124..59b9ba52e66 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -286,6 +286,27 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { + case EXT_CSD_CARD_TYPE_SDR_ALL: + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V: + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V: + case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52: + card->ext_csd.hs_max_dtr = 200000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200; + break; + case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL: + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V: + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V: + case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52: + card->ext_csd.hs_max_dtr = 200000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V; + break; + case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL: + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V: + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V: + case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52: + card->ext_csd.hs_max_dtr = 200000000; + card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V; + break; case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: card->ext_csd.hs_max_dtr = 52000000; @@ -348,7 +369,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; mmc_part_add(card, part_size, EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx, - "boot%d", idx, true); + "boot%d", idx, true, + MMC_BLK_DATA_AREA_BOOT); } } } @@ -435,7 +457,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) hc_wp_grp_sz); mmc_part_add(card, part_size << 19, EXT_CSD_PART_CONFIG_ACC_GP0 + idx, - "gp%d", idx, false); + "gp%d", idx, false, + MMC_BLK_DATA_AREA_GP); } } card->ext_csd.sec_trim_mult = @@ -446,6 +469,14 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; card->ext_csd.trim_timeout = 300 * ext_csd[EXT_CSD_TRIM_MULT]; + + /* + * Note that the call to mmc_part_add above defaults to read + * only. If this default assumption is changed, the call must + * take into account the value of boot_locked below. + */ + card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP]; + card->ext_csd.boot_ro_lockable = true; } if (card->ext_csd.rev >= 5) { @@ -690,6 +721,79 @@ static int mmc_select_powerclass(struct mmc_card *card, } /* + * Selects the desired buswidth and switch to the HS200 mode + * if bus width set without error + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + int idx, err = 0; + struct mmc_host *host; + static unsigned ext_csd_bits[] = { + EXT_CSD_BUS_WIDTH_4, + EXT_CSD_BUS_WIDTH_8, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_4, + MMC_BUS_WIDTH_8, + }; + + BUG_ON(!card); + + host = card->host; + + if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && + host->caps2 & MMC_CAP2_HS200_1_2V_SDR) + if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0)) + err = mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_180, 0); + + /* If fails try again during next card power cycle */ + if (err) + goto err; + + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0; + + /* + * Unlike SD, MMC cards dont have a configuration register to notify + * supported bus width. So bus test command should be run to identify + * the supported bus width or compare the ext csd values of current + * bus width and ext csd values of 1 bit mode read earlier. + */ + for (; idx >= 0; idx--) { + + /* + * Host is capable of 8bit transfer, then switch + * the device to work in 8bit transfer mode. If the + * mmc switch command returns error then switch to + * 4bit transfer mode. On success set the corresponding + * bus width on the host. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx], + card->ext_csd.generic_cmd6_time); + if (err) + continue; + + mmc_set_bus_width(card->host, bus_widths[idx]); + + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + err = mmc_compare_ext_csds(card, bus_widths[idx]); + else + err = mmc_bus_test(card, bus_widths[idx]); + if (!err) + break; + } + + /* switch to HS200 mode if bus width set successfully */ + if (!err) + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, 2, 0); +err: + return err; +} + +/* * Handle the detection and initialisation of a card. * * In the case of a resume, "oldcard" will contain the card @@ -895,11 +999,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Activate high speed (if supported) */ - if ((card->ext_csd.hs_max_dtr != 0) && - (host->caps & MMC_CAP_MMC_HIGHSPEED)) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1, - card->ext_csd.generic_cmd6_time); + if (card->ext_csd.hs_max_dtr != 0) { + err = 0; + if (card->ext_csd.hs_max_dtr > 52000000 && + host->caps2 & MMC_CAP2_HS200) + err = mmc_select_hs200(card); + else if (host->caps & MMC_CAP_MMC_HIGHSPEED) + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, 1, 0); + if (err && err != -EBADMSG) goto free_card; @@ -908,8 +1016,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, mmc_hostname(card->host)); err = 0; } else { - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + if (card->ext_csd.hs_max_dtr > 52000000 && + host->caps2 & MMC_CAP2_HS200) { + mmc_card_set_hs200(card); + mmc_set_timing(card->host, + MMC_TIMING_MMC_HS200); + } else { + mmc_card_set_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + } } } @@ -934,7 +1049,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ max_dtr = (unsigned int)-1; - if (mmc_card_highspeed(card)) { + if (mmc_card_highspeed(card) || mmc_card_hs200(card)) { if (max_dtr > card->ext_csd.hs_max_dtr) max_dtr = card->ext_csd.hs_max_dtr; } else if (max_dtr > card->csd.max_dtr) { @@ -960,9 +1075,48 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* + * Indicate HS200 SDR mode (if supported). + */ + if (mmc_card_hs200(card)) { + u32 ext_csd_bits; + u32 bus_width = card->host->ios.bus_width; + + /* + * For devices supporting HS200 mode, the bus width has + * to be set before executing the tuning function. If + * set before tuning, then device will respond with CRC + * errors for responses on CMD line. So for HS200 the + * sequence will be + * 1. set bus width 4bit / 8 bit (1 bit not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz <=200MHz and + * 4. execute tuning for HS200 + */ + if ((host->caps2 & MMC_CAP2_HS200) && + card->host->ops->execute_tuning) + err = card->host->ops->execute_tuning(card->host, + MMC_SEND_TUNING_BLOCK_HS200); + if (err) { + pr_warning("%s: tuning execution failed\n", + mmc_hostname(card->host)); + goto err; + } + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + err = mmc_select_powerclass(card, ext_csd_bits, ext_csd); + if (err) { + pr_err("%s: power class selection to bus width %d failed\n", + mmc_hostname(card->host), 1 << bus_width); + goto err; + } + } + + /* * Activate wide bus and DDR (if supported). */ - if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && + if (!mmc_card_hs200(card) && + (card->csd.mmca_vsn >= CSD_SPEC_VER_3) && (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { static unsigned ext_csd_bits[][2] = { { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 }, @@ -1048,7 +1202,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * * WARNING: eMMC rules are NOT the same as SD DDR */ - if (ddr == EXT_CSD_CARD_TYPE_DDR_1_2V) { + if (ddr == MMC_1_2V_DDR_MODE) { err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0); if (err) @@ -1067,14 +1221,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if ((host->caps2 & MMC_CAP2_CACHE_CTRL) && card->ext_csd.cache_size > 0) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_CACHE_CTRL, 1, 0); + EXT_CSD_CACHE_CTRL, 1, + card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; /* * Only if no error, cache is turned on successfully. */ - card->ext_csd.cache_ctrl = err ? 0 : 1; + if (err) { + pr_warning("%s: Cache is supported, " + "but failed to turn on (%d)\n", + mmc_hostname(card->host), err); + card->ext_csd.cache_ctrl = 0; + err = 0; + } else { + card->ext_csd.cache_ctrl = 1; + } } if (!oldcard) @@ -1105,6 +1268,14 @@ static void mmc_remove(struct mmc_host *host) } /* + * Card detection - card is alive. + */ +static int mmc_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* * Card detection callback from host. */ static void mmc_detect(struct mmc_host *host) @@ -1119,7 +1290,7 @@ static void mmc_detect(struct mmc_host *host) /* * Just check if our card has been removed. */ - err = mmc_send_status(host->card, NULL); + err = _mmc_detect_card_removed(host); mmc_release_host(host); @@ -1224,6 +1395,7 @@ static const struct mmc_bus_ops mmc_ops = { .suspend = NULL, .resume = NULL, .power_restore = mmc_power_restore, + .alive = mmc_alive, }; static const struct mmc_bus_ops mmc_ops_unsafe = { @@ -1234,6 +1406,7 @@ static const struct mmc_bus_ops mmc_ops_unsafe = { .suspend = mmc_suspend, .resume = mmc_resume, .power_restore = mmc_power_restore, + .alive = mmc_alive, }; static void mmc_attach_bus_ops(struct mmc_host *host) |