diff options
Diffstat (limited to 'drivers/misc')
| -rw-r--r-- | drivers/misc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/c2port/core.c | 2 | ||||
| -rw-r--r-- | drivers/misc/cb710/Kconfig | 25 | ||||
| -rw-r--r-- | drivers/misc/cb710/Makefile | 8 | ||||
| -rw-r--r-- | drivers/misc/cb710/core.c | 357 | ||||
| -rw-r--r-- | drivers/misc/cb710/debug.c | 119 | ||||
| -rw-r--r-- | drivers/misc/cb710/sgbuf2.c | 150 | ||||
| -rw-r--r-- | drivers/misc/eeprom/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/misc/eeprom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/eeprom/max6875.c | 246 | ||||
| -rw-r--r-- | drivers/misc/enclosure.c | 6 | ||||
| -rw-r--r-- | drivers/misc/sgi-gru/grufile.c | 2 | ||||
| -rw-r--r-- | drivers/misc/sgi-xp/xpc_uv.c | 2 | ||||
| -rw-r--r-- | drivers/misc/sgi-xp/xpnet.c | 3 |
15 files changed, 931 insertions, 6 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6d1ac180f6e..68ab39d7cb3 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -235,5 +235,6 @@ config ISL29003 source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" +source "drivers/misc/cb710/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7871f05dcb9..36f733cd60e 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_ISL29003) += isl29003.o obj-$(CONFIG_C2PORT) += c2port/ obj-y += eeprom/ +obj-y += cb710/ diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index 0207dd59090..b5346b4db91 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/kernel.h> +#include <linux/kmemcheck.h> #include <linux/ctype.h> #include <linux/delay.h> #include <linux/idr.h> @@ -891,6 +892,7 @@ struct c2port_device *c2port_device_register(char *name, return ERR_PTR(-EINVAL); c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL); + kmemcheck_annotate_bitfield(c2dev, flags); if (unlikely(!c2dev)) return ERR_PTR(-ENOMEM); diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig new file mode 100644 index 00000000000..22429b8b106 --- /dev/null +++ b/drivers/misc/cb710/Kconfig @@ -0,0 +1,25 @@ +config CB710_CORE + tristate "ENE CB710/720 Flash memory card reader support" + depends on PCI + help + This option enables support for PCI ENE CB710/720 Flash memory card + reader found in some laptops (ie. some versions of HP Compaq nx9500). + + You will also have to select some flash card format drivers (MMC/SD, + MemoryStick). + + This driver can also be built as a module. If so, the module + will be called cb710. + +config CB710_DEBUG + bool "Enable driver debugging" + depends on CB710_CORE != n + default n + help + This is an option for use by developers; most people should + say N here. This adds a lot of debugging output to dmesg. + +config CB710_DEBUG_ASSUMPTIONS + bool + depends on CB710_CORE != n + default y diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile new file mode 100644 index 00000000000..7b80cbf1a60 --- /dev/null +++ b/drivers/misc/cb710/Makefile @@ -0,0 +1,8 @@ +ifeq ($(CONFIG_CB710_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG +endif + +obj-$(CONFIG_CB710_CORE) += cb710.o + +cb710-y := core.o sgbuf2.o +cb710-$(CONFIG_CB710_DEBUG) += debug.o diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c new file mode 100644 index 00000000000..b14eab0f2ba --- /dev/null +++ b/drivers/misc/cb710/core.c @@ -0,0 +1,357 @@ +/* + * cb710/core.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/idr.h> +#include <linux/cb710.h> + +static DEFINE_IDA(cb710_ida); +static DEFINE_SPINLOCK(cb710_ida_lock); + +void cb710_pci_update_config_reg(struct pci_dev *pdev, + int reg, uint32_t mask, uint32_t xor) +{ + u32 rval; + + pci_read_config_dword(pdev, reg, &rval); + rval = (rval & mask) ^ xor; + pci_write_config_dword(pdev, reg, rval); +} +EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg); + +/* Some magic writes based on Windows driver init code */ +static int __devinit cb710_pci_configure(struct pci_dev *pdev) +{ + unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn); + u32 val; + + cb710_pci_update_config_reg(pdev, 0x48, + ~0x000000FF, 0x0000003F); + + pci_read_config_dword(pdev, 0x48, &val); + if (val & 0x80000000) + return 0; + + if (!pdev0) + return -ENODEV; + + if (pdev0->vendor == PCI_VENDOR_ID_ENE + && pdev0->device == PCI_DEVICE_ID_ENE_720) { + cb710_pci_update_config_reg(pdev0, 0x8C, + ~0x00F00000, 0x00100000); + cb710_pci_update_config_reg(pdev0, 0xB0, + ~0x08000000, 0x08000000); + } + + cb710_pci_update_config_reg(pdev0, 0x8C, + ~0x00000F00, 0x00000200); + cb710_pci_update_config_reg(pdev0, 0x90, + ~0x00060000, 0x00040000); + + pci_dev_put(pdev0); + + return 0; +} + +static irqreturn_t cb710_irq_handler(int irq, void *data) +{ + struct cb710_chip *chip = data; + struct cb710_slot *slot = &chip->slot[0]; + irqreturn_t handled = IRQ_NONE; + unsigned nr; + + spin_lock(&chip->irq_lock); /* incl. smp_rmb() */ + + for (nr = chip->slots; nr; ++slot, --nr) { + cb710_irq_handler_t handler_func = slot->irq_handler; + if (handler_func && handler_func(slot)) + handled = IRQ_HANDLED; + } + + spin_unlock(&chip->irq_lock); + + return handled; +} + +static void cb710_release_slot(struct device *dev) +{ +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev)); + struct cb710_chip *chip = cb710_slot_to_chip(slot); + + /* slot struct can be freed now */ + atomic_dec(&chip->slot_refs_count); +#endif +} + +static int __devinit cb710_register_slot(struct cb710_chip *chip, + unsigned slot_mask, unsigned io_offset, const char *name) +{ + int nr = chip->slots; + struct cb710_slot *slot = &chip->slot[nr]; + int err; + + dev_dbg(cb710_chip_dev(chip), + "register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n", + name, chip->platform_id, nr, slot_mask, io_offset); + + /* slot->irq_handler == NULL here; this needs to be + * seen before platform_device_register() */ + ++chip->slots; + smp_wmb(); + + slot->iobase = chip->iobase + io_offset; + slot->pdev.name = name; + slot->pdev.id = chip->platform_id; + slot->pdev.dev.parent = &chip->pdev->dev; + slot->pdev.dev.release = cb710_release_slot; + + err = platform_device_register(&slot->pdev); + +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + atomic_inc(&chip->slot_refs_count); +#endif + + if (err) { + /* device_initialize() called from platform_device_register() + * wants this on error path */ + platform_device_put(&slot->pdev); + + /* slot->irq_handler == NULL here anyway, so no lock needed */ + --chip->slots; + return err; + } + + chip->slot_mask |= slot_mask; + + return 0; +} + +static void cb710_unregister_slot(struct cb710_chip *chip, + unsigned slot_mask) +{ + int nr = chip->slots - 1; + + if (!(chip->slot_mask & slot_mask)) + return; + + platform_device_unregister(&chip->slot[nr].pdev); + + /* complementary to spin_unlock() in cb710_set_irq_handler() */ + smp_rmb(); + BUG_ON(chip->slot[nr].irq_handler != NULL); + + /* slot->irq_handler == NULL here, so no lock needed */ + --chip->slots; + chip->slot_mask &= ~slot_mask; +} + +void cb710_set_irq_handler(struct cb710_slot *slot, + cb710_irq_handler_t handler) +{ + struct cb710_chip *chip = cb710_slot_to_chip(slot); + unsigned long flags; + + spin_lock_irqsave(&chip->irq_lock, flags); + slot->irq_handler = handler; + spin_unlock_irqrestore(&chip->irq_lock, flags); +} +EXPORT_SYMBOL_GPL(cb710_set_irq_handler); + +#ifdef CONFIG_PM + +static int cb710_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct cb710_chip *chip = pci_get_drvdata(pdev); + + free_irq(pdev->irq, chip); + pci_save_state(pdev); + pci_disable_device(pdev); + if (state.event & PM_EVENT_SLEEP) + pci_set_power_state(pdev, PCI_D3cold); + return 0; +} + +static int cb710_resume(struct pci_dev *pdev) +{ + struct cb710_chip *chip = pci_get_drvdata(pdev); + int err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pcim_enable_device(pdev); + if (err) + return err; + + return devm_request_irq(&pdev->dev, pdev->irq, + cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip); +} + +#endif /* CONFIG_PM */ + +static int __devinit cb710_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct cb710_chip *chip; + unsigned long flags; + u32 val; + int err; + int n = 0; + + err = cb710_pci_configure(pdev); + if (err) + return err; + + /* this is actually magic... */ + pci_read_config_dword(pdev, 0x48, &val); + if (!(val & 0x80000000)) { + pci_write_config_dword(pdev, 0x48, val|0x71000000); + pci_read_config_dword(pdev, 0x48, &val); + } + + dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val); + if (!(val & 0x70000000)) + return -ENODEV; + val = (val >> 28) & 7; + if (val & CB710_SLOT_MMC) + ++n; + if (val & CB710_SLOT_MS) + ++n; + if (val & CB710_SLOT_SM) + ++n; + + chip = devm_kzalloc(&pdev->dev, + sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + err = pcim_enable_device(pdev); + if (err) + return err; + + err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME); + if (err) + return err; + + chip->pdev = pdev; + chip->iobase = pcim_iomap_table(pdev)[0]; + + pci_set_drvdata(pdev, chip); + + err = devm_request_irq(&pdev->dev, pdev->irq, + cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip); + if (err) + return err; + + do { + if (!ida_pre_get(&cb710_ida, GFP_KERNEL)) + return -ENOMEM; + + spin_lock_irqsave(&cb710_ida_lock, flags); + err = ida_get_new(&cb710_ida, &chip->platform_id); + spin_unlock_irqrestore(&cb710_ida_lock, flags); + + if (err && err != -EAGAIN) + return err; + } while (err); + + + dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n", + chip->platform_id, chip->iobase, pdev->irq); + + if (val & CB710_SLOT_MMC) { /* MMC/SD slot */ + err = cb710_register_slot(chip, + CB710_SLOT_MMC, 0x00, "cb710-mmc"); + if (err) + return err; + } + + if (val & CB710_SLOT_MS) { /* MemoryStick slot */ + err = cb710_register_slot(chip, + CB710_SLOT_MS, 0x40, "cb710-ms"); + if (err) + goto unreg_mmc; + } + + if (val & CB710_SLOT_SM) { /* SmartMedia slot */ + err = cb710_register_slot(chip, + CB710_SLOT_SM, 0x60, "cb710-sm"); + if (err) + goto unreg_ms; + } + + return 0; +unreg_ms: + cb710_unregister_slot(chip, CB710_SLOT_MS); +unreg_mmc: + cb710_unregister_slot(chip, CB710_SLOT_MMC); + +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + BUG_ON(atomic_read(&chip->slot_refs_count) != 0); +#endif + return err; +} + +static void __devexit cb710_remove_one(struct pci_dev *pdev) +{ + struct cb710_chip *chip = pci_get_drvdata(pdev); + unsigned long flags; + + cb710_unregister_slot(chip, CB710_SLOT_SM); + cb710_unregister_slot(chip, CB710_SLOT_MS); + cb710_unregister_slot(chip, CB710_SLOT_MMC); +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + BUG_ON(atomic_read(&chip->slot_refs_count) != 0); +#endif + + spin_lock_irqsave(&cb710_ida_lock, flags); + ida_remove(&cb710_ida, chip->platform_id); + spin_unlock_irqrestore(&cb710_ida_lock, flags); +} + +static const struct pci_device_id cb710_pci_tbl[] = { + { PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH, + PCI_ANY_ID, PCI_ANY_ID, }, + { 0, } +}; + +static struct pci_driver cb710_driver = { + .name = KBUILD_MODNAME, + .id_table = cb710_pci_tbl, + .probe = cb710_probe, + .remove = __devexit_p(cb710_remove_one), +#ifdef CONFIG_PM + .suspend = cb710_suspend, + .resume = cb710_resume, +#endif +}; + +static int __init cb710_init_module(void) +{ + return pci_register_driver(&cb710_driver); +} + +static void __exit cb710_cleanup_module(void) +{ + pci_unregister_driver(&cb710_driver); + ida_destroy(&cb710_ida); +} + +module_init(cb710_init_module); +module_exit(cb710_cleanup_module); + +MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>"); +MODULE_DESCRIPTION("ENE CB710 memory card reader driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cb710_pci_tbl); diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c new file mode 100644 index 00000000000..02358d086e0 --- /dev/null +++ b/drivers/misc/cb710/debug.c @@ -0,0 +1,119 @@ +/* + * cb710/debug.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/cb710.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> + +#define CB710_REG_COUNT 0x80 + +static const u16 allow[CB710_REG_COUNT/16] = { + 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF, + 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF, +}; +static const char *const prefix[ARRAY_SIZE(allow)] = { + "MMC", "MMC", "MMC", "MMC", + "MS?", "MS?", "SM?", "SM?" +}; + +static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits) +{ + unsigned mask = (1 << bits/8) - 1; + offset *= bits/8; + return ((allow[block] >> offset) & mask) == mask; +} + +#define CB710_READ_REGS_TEMPLATE(t) \ +static void cb710_read_regs_##t(void __iomem *iobase, \ + u##t *reg, unsigned select) \ +{ \ + unsigned i, j; \ + \ + for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \ + if (!(select & (1 << i))) \ + continue; \ + \ + for (j = 0; j < 0x10/(t/8); ++j) { \ + if (!allow_reg_read(i, j, t)) \ + continue; \ + reg[j] = ioread##t(iobase \ + + (i << 4) + (j * (t/8))); \ + } \ + } \ +} + +static const char cb710_regf_8[] = "%02X"; +static const char cb710_regf_16[] = "%04X"; +static const char cb710_regf_32[] = "%08X"; +static const char cb710_xes[] = "xxxxxxxx"; + +#define CB710_DUMP_REGS_TEMPLATE(t) \ +static void cb710_dump_regs_##t(struct device *dev, \ + const u##t *reg, unsigned select) \ +{ \ + const char *const xp = &cb710_xes[8 - t/4]; \ + const char *const format = cb710_regf_##t; \ + \ + char msg[100], *p; \ + unsigned i, j; \ + \ + for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \ + if (!(select & (1 << i))) \ + continue; \ + p = msg; \ + for (j = 0; j < 0x10/(t/8); ++j) { \ + *p++ = ' '; \ + if (j == 8/(t/8)) \ + *p++ = ' '; \ + if (allow_reg_read(i, j, t)) \ + p += sprintf(p, format, reg[j]); \ + else \ + p += sprintf(p, "%s", xp); \ + } \ + dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \ + } \ +} + +#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \ +static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \ + unsigned select) \ +{ \ + u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \ + \ + memset(®s, 0, sizeof(regs)); \ + cb710_read_regs_##t(chip->iobase, regs, select); \ + cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \ +} + +#define CB710_REG_ACCESS_TEMPLATES(t) \ + CB710_READ_REGS_TEMPLATE(t) \ + CB710_DUMP_REGS_TEMPLATE(t) \ + CB710_READ_AND_DUMP_REGS_TEMPLATE(t) + +CB710_REG_ACCESS_TEMPLATES(8) +CB710_REG_ACCESS_TEMPLATES(16) +CB710_REG_ACCESS_TEMPLATES(32) + +void cb710_dump_regs(struct cb710_chip *chip, unsigned select) +{ + if (!(select & CB710_DUMP_REGS_MASK)) + select = CB710_DUMP_REGS_ALL; + if (!(select & CB710_DUMP_ACCESS_MASK)) + select |= CB710_DUMP_ACCESS_8; + + if (select & CB710_DUMP_ACCESS_32) + cb710_read_and_dump_regs_32(chip, select); + if (select & CB710_DUMP_ACCESS_16) + cb710_read_and_dump_regs_16(chip, select); + if (select & CB710_DUMP_ACCESS_8) + cb710_read_and_dump_regs_8(chip, select); +} +EXPORT_SYMBOL_GPL(cb710_dump_regs); + diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c new file mode 100644 index 00000000000..d38a7acdb6e --- /dev/null +++ b/drivers/misc/cb710/sgbuf2.c @@ -0,0 +1,150 @@ +/* + * cb710/sgbuf2.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cb710.h> + +static bool sg_dwiter_next(struct sg_mapping_iter *miter) +{ + if (sg_miter_next(miter)) { + miter->consumed = 0; + return true; + } else + return false; +} + +static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter) +{ + return miter->length == miter->consumed && !sg_dwiter_next(miter); +} + +static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter) +{ + size_t len, left = 4; + uint32_t data; + void *addr = &data; + + do { + len = min(miter->length - miter->consumed, left); + memcpy(addr, miter->addr + miter->consumed, len); + miter->consumed += len; + left -= len; + if (!left) + return data; + addr += len; + } while (sg_dwiter_next(miter)); + + memset(addr, 0, left); + return data; +} + +static inline bool needs_unaligned_copy(const void *ptr) +{ +#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS + return false; +#else + return ((ptr - NULL) & 3) != 0; +#endif +} + +static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr) +{ + size_t len; + + if (sg_dwiter_is_at_end(miter)) + return true; + + len = miter->length - miter->consumed; + + if (likely(len >= 4 && !needs_unaligned_copy( + miter->addr + miter->consumed))) { + *ptr = miter->addr + miter->consumed; + miter->consumed += 4; + return true; + } + + return false; +} + +/** + * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer + * @miter: sg mapping iterator used for reading + * + * Description: + * Returns 32-bit word starting at byte pointed to by @miter@ + * handling any alignment issues. Bytes past the buffer's end + * are not accessed (read) but are returned as zeroes. @miter@ + * is advanced by 4 bytes or to the end of buffer whichever is + * closer. + * + * Context: + * Same requirements as in sg_miter_next(). + * + * Returns: + * 32-bit word just read. + */ +uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter) +{ + uint32_t *ptr = NULL; + + if (likely(sg_dwiter_get_next_block(miter, &ptr))) + return ptr ? *ptr : 0; + + return sg_dwiter_read_buffer(miter); +} +EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block); + +static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data) +{ + size_t len, left = 4; + void *addr = &data; + + do { + len = min(miter->length - miter->consumed, left); + memcpy(miter->addr, addr, len); + miter->consumed += len; + left -= len; + if (!left) + return; + addr += len; + flush_kernel_dcache_page(miter->page); + } while (sg_dwiter_next(miter)); +} + +/** + * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer + * @miter: sg mapping iterator used for writing + * + * Description: + * Writes 32-bit word starting at byte pointed to by @miter@ + * handling any alignment issues. Bytes which would be written + * past the buffer's end are silently discarded. @miter@ is + * advanced by 4 bytes or to the end of buffer whichever is closer. + * + * Context: + * Same requirements as in sg_miter_next(). + */ +void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data) +{ + uint32_t *ptr = NULL; + + if (likely(sg_dwiter_get_next_block(miter, &ptr))) { + if (ptr) + *ptr = data; + else + return; + } else + sg_dwiter_write_slow(miter, data); + + if (miter->length == miter->consumed) + flush_kernel_dcache_page(miter->page); +} +EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block); + diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 89fec052f3b..9118613af32 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -48,6 +48,20 @@ config EEPROM_LEGACY This driver can also be built as a module. If so, the module will be called eeprom. +config EEPROM_MAX6875 + tristate "Maxim MAX6874/5 power supply supervisor" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get read-only support for the user EEPROM of + the Maxim MAX6874/5 EEPROM-programmable, quad power-supply + sequencer/supervisor. + + All other features of this chip should be accessed via i2c-dev. + + This driver can also be built as a module. If so, the module + will be called max6875. + + config EEPROM_93CX6 tristate "EEPROM 93CX6 support" help diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 539dd8f8812..df3d68ffa9d 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_EEPROM_AT24) += at24.o obj-$(CONFIG_EEPROM_AT25) += at25.o obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o +obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c new file mode 100644 index 00000000000..3c0c58eed34 --- /dev/null +++ b/drivers/misc/eeprom/max6875.c @@ -0,0 +1,246 @@ +/* + max6875.c - driver for MAX6874/MAX6875 + + Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> + + Based on eeprom.c + + The MAX6875 has a bank of registers and two banks of EEPROM. + Address ranges are defined as follows: + * 0x0000 - 0x0046 = configuration registers + * 0x8000 - 0x8046 = configuration EEPROM + * 0x8100 - 0x82FF = user EEPROM + + This driver makes the user EEPROM available for read. + + The registers & config EEPROM should be accessed via i2c-dev. + + The MAX6875 ignores the lowest address bit, so each chip responds to + two addresses - 0x50/0x51 and 0x52/0x53. + + Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read + address, so this driver is destructive if loaded for the wrong EEPROM chip. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mutex.h> + +/* Do not scan - the MAX6875 access method will write to some EEPROM chips */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(max6875); + +/* The MAX6875 can only read/write 16 bytes at a time */ +#define SLICE_SIZE 16 +#define SLICE_BITS 4 + +/* USER EEPROM is at addresses 0x8100 - 0x82FF */ +#define USER_EEPROM_BASE 0x8100 +#define USER_EEPROM_SIZE 0x0200 +#define USER_EEPROM_SLICES 32 + +/* MAX6875 commands */ +#define MAX6875_CMD_BLK_READ 0x84 + +/* Each client has this additional data */ +struct max6875_data { + struct i2c_client *fake_client; + struct mutex update_lock; + + u32 valid; + u8 data[USER_EEPROM_SIZE]; + unsigned long last_updated[USER_EEPROM_SLICES]; +}; + +static void max6875_update_slice(struct i2c_client *client, int slice) +{ + struct max6875_data *data = i2c_get_clientdata(client); + int i, j, addr; + u8 *buf; + + if (slice >= USER_EEPROM_SLICES) + return; + + mutex_lock(&data->update_lock); + + buf = &data->data[slice << SLICE_BITS]; + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice])) { + + dev_dbg(&client->dev, "Starting update of slice %u\n", slice); + + data->valid &= ~(1 << slice); + + addr = USER_EEPROM_BASE + (slice << SLICE_BITS); + + /* select the eeprom address */ + if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) { + dev_err(&client->dev, "address set failed\n"); + goto exit_up; + } + + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + if (i2c_smbus_read_i2c_block_data(client, + MAX6875_CMD_BLK_READ, + SLICE_SIZE, + buf) != SLICE_SIZE) { + goto exit_up; + } + } else { + for (i = 0; i < SLICE_SIZE; i++) { + j = i2c_smbus_read_byte(client); + if (j < 0) { + goto exit_up; + } + buf[i] = j; + } + } + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit_up: + mutex_unlock(&data->update_lock); +} + +static ssize_t max6875_read(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = kobj_to_i2c_client(kobj); + struct max6875_data *data = i2c_get_clientdata(client); + int slice, max_slice; + + if (off > USER_EEPROM_SIZE) + return 0; + + if (off + count > USER_EEPROM_SIZE) + count = USER_EEPROM_SIZE - off; + + /* refresh slices which contain requested bytes */ + max_slice = (off + count - 1) >> SLICE_BITS; + for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++) + max6875_update_slice(client, slice); + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute user_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = USER_EEPROM_SIZE, + .read = max6875_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max6875_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA + | I2C_FUNC_SMBUS_READ_BYTE)) + return -ENODEV; + + /* Only check even addresses */ + if (client->addr & 1) + return -ENODEV; + + strlcpy(info->type, "max6875", I2C_NAME_SIZE); + + return 0; +} + +static int max6875_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max6875_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) + return -ENOMEM; + + /* A fake client is created on the odd address */ + data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1); + if (!data->fake_client) { + err = -ENOMEM; + goto exit_kfree; + } + + /* Init real i2c_client */ + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + err = sysfs_create_bin_file(&client->dev.kobj, &user_eeprom_attr); + if (err) + goto exit_remove_fake; + + return 0; + +exit_remove_fake: + i2c_unregister_device(data->fake_client); +exit_kfree: + kfree(data); + return err; +} + +static int max6875_remove(struct i2c_client *client) +{ + struct max6875_data *data = i2c_get_clientdata(client); + + i2c_unregister_device(data->fake_client); + + sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr); + kfree(data); + + return 0; +} + +static const struct i2c_device_id max6875_id[] = { + { "max6875", 0 }, + { } +}; + +static struct i2c_driver max6875_driver = { + .driver = { + .name = "max6875", + }, + .probe = max6875_probe, + .remove = max6875_remove, + .id_table = max6875_id, + + .detect = max6875_detect, + .address_data = &addr_data, +}; + +static int __init max6875_init(void) +{ + return i2c_add_driver(&max6875_driver); +} + +static void __exit max6875_exit(void) +{ + i2c_del_driver(&max6875_driver); +} + + +MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); +MODULE_DESCRIPTION("MAX6875 driver"); +MODULE_LICENSE("GPL"); + +module_init(max6875_init); +module_exit(max6875_exit); diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 3cf61ece71d..348443bdb23 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components, edev->edev.class = &enclosure_class; edev->edev.parent = get_device(dev); edev->cb = cb; - dev_set_name(&edev->edev, name); + dev_set_name(&edev->edev, "%s", name); err = device_register(&edev->edev); if (err) goto err; @@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev, ecomp->number = number; cdev = &ecomp->cdev; cdev->parent = get_device(&edev->edev); - if (name) - dev_set_name(cdev, name); + if (name && name[0]) + dev_set_name(cdev, "%s", name); else dev_set_name(cdev, "%u", number); diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index bbefe77c67a..3ce2920e2bf 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -302,7 +302,7 @@ static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr) pnode = uv_node_to_pnode(nid); if (bid < 0 || gru_base[bid]) continue; - page = alloc_pages_node(nid, GFP_KERNEL, order); + page = alloc_pages_exact_node(nid, GFP_KERNEL, order); if (!page) goto fail; gru_base[bid] = page_address(page); diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 9172fcdee4e..c76677afda1 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -232,7 +232,7 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name, mq->mmr_blade = uv_cpu_to_blade_id(cpu); nid = cpu_to_node(cpu); - page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, pg_order); if (page == NULL) { dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 6faefcffcb5..8d1c60a3f0d 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -450,7 +450,8 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) "packet\n", sizeof(struct xpnet_pending_msg)); dev->stats.tx_errors++; - return -ENOMEM; + dev_kfree_skb(skb); + return NETDEV_TX_OK; } /* get the beginning of the first cacheline and end of last */ |