aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc/eeprom
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/eeprom')
-rw-r--r--drivers/misc/eeprom/Kconfig25
-rw-r--r--drivers/misc/eeprom/Makefile2
-rw-r--r--drivers/misc/eeprom/digsy_mtc_eeprom.c85
-rw-r--r--drivers/misc/eeprom/eeprom_93xx46.c410
4 files changed, 522 insertions, 0 deletions
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 9118613af32..26cf12ca7f5 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -70,4 +70,29 @@ config EEPROM_93CX6
If unsure, say N.
+config EEPROM_93XX46
+ tristate "Microwire EEPROM 93XX46 support"
+ depends on SPI && SYSFS
+ help
+ Driver for the microwire EEPROM chipsets 93xx46x. The driver
+ supports both read and write commands and also the command to
+ erase the whole EEPROM.
+
+ This driver can also be built as a module. If so, the module
+ will be called eeprom_93xx46.
+
+ If unsure, say N.
+
+config EEPROM_DIGSY_MTC_CFG
+ bool "DigsyMTC display configuration EEPROMs device"
+ depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ help
+ This option enables access to display configuration EEPROMs
+ on digsy_mtc board. You have to additionally select Microwire
+ EEPROM 93XX46 driver. sysfs entries will be created for that
+ EEPROM allowing to read/write the configuration data or to
+ erase the whole EEPROM.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index df3d68ffa9d..fc1e81d2926 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_EEPROM_AT25) += at25.o
obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
+obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
new file mode 100644
index 00000000000..66d9e1baeae
--- /dev/null
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -0,0 +1,85 @@
+/*
+ * EEPROMs access control driver for display configuration EEPROMs
+ * on DigsyMTC board.
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/eeprom_93xx46.h>
+
+#define GPIO_EEPROM_CLK 216
+#define GPIO_EEPROM_CS 210
+#define GPIO_EEPROM_DI 217
+#define GPIO_EEPROM_DO 249
+#define GPIO_EEPROM_OE 255
+#define EE_SPI_BUS_NUM 1
+
+static void digsy_mtc_op_prepare(void *p)
+{
+ /* enable */
+ gpio_set_value(GPIO_EEPROM_OE, 0);
+}
+
+static void digsy_mtc_op_finish(void *p)
+{
+ /* disable */
+ gpio_set_value(GPIO_EEPROM_OE, 1);
+}
+
+struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
+ .flags = EE_ADDR8,
+ .prepare = digsy_mtc_op_prepare,
+ .finish = digsy_mtc_op_finish,
+};
+
+static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
+ .sck = GPIO_EEPROM_CLK,
+ .mosi = GPIO_EEPROM_DI,
+ .miso = GPIO_EEPROM_DO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device digsy_mtc_eeprom = {
+ .name = "spi_gpio",
+ .id = EE_SPI_BUS_NUM,
+ .dev = {
+ .platform_data = &eeprom_spi_gpio_data,
+ },
+};
+
+static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
+ {
+ .modalias = "93xx46",
+ .max_speed_hz = 1000000,
+ .bus_num = EE_SPI_BUS_NUM,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = (void *)GPIO_EEPROM_CS,
+ .platform_data = &digsy_mtc_eeprom_data,
+ },
+};
+
+static int __init digsy_mtc_eeprom_devices_init(void)
+{
+ int ret;
+
+ ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
+ "93xx46 EEPROMs OE");
+ if (ret) {
+ pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
+ return ret;
+ }
+ spi_register_board_info(digsy_mtc_eeprom_info,
+ ARRAY_SIZE(digsy_mtc_eeprom_info));
+ return platform_device_register(&digsy_mtc_eeprom);
+}
+device_initcall(digsy_mtc_eeprom_devices_init);
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
new file mode 100644
index 00000000000..0c7ebb1e19e
--- /dev/null
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -0,0 +1,410 @@
+/*
+ * Driver for 93xx46 EEPROMs
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/eeprom_93xx46.h>
+
+#define OP_START 0x4
+#define OP_WRITE (OP_START | 0x1)
+#define OP_READ (OP_START | 0x2)
+#define ADDR_EWDS 0x00
+#define ADDR_ERAL 0x20
+#define ADDR_EWEN 0x30
+
+struct eeprom_93xx46_dev {
+ struct spi_device *spi;
+ struct eeprom_93xx46_platform_data *pdata;
+ struct bin_attribute bin;
+ struct mutex lock;
+ int addrlen;
+};
+
+static ssize_t
+eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct eeprom_93xx46_dev *edev;
+ struct device *dev;
+ struct spi_message m;
+ struct spi_transfer t[2];
+ int bits, ret;
+ u16 cmd_addr;
+
+ dev = container_of(kobj, struct device, kobj);
+ edev = dev_get_drvdata(dev);
+
+ if (unlikely(off >= edev->bin.size))
+ return 0;
+ if ((off + count) > edev->bin.size)
+ count = edev->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ cmd_addr = OP_READ << edev->addrlen;
+
+ if (edev->addrlen == 7) {
+ cmd_addr |= off & 0x7f;
+ bits = 10;
+ } else {
+ cmd_addr |= off & 0x3f;
+ bits = 9;
+ }
+
+ dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
+ cmd_addr, edev->spi->max_speed_hz);
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = (char *)&cmd_addr;
+ t[0].len = 2;
+ t[0].bits_per_word = bits;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ t[1].bits_per_word = 8;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ ret = spi_sync(edev->spi, &m);
+ /* have to wait at least Tcsl ns */
+ ndelay(250);
+ if (ret) {
+ dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
+ count, (int)off, ret);
+ }
+
+ if (edev->pdata->finish)
+ edev->pdata->finish(edev);
+
+ mutex_unlock(&edev->lock);
+ return ret ? : count;
+}
+
+static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
+{
+ struct spi_message m;
+ struct spi_transfer t;
+ int bits, ret;
+ u16 cmd_addr;
+
+ cmd_addr = OP_START << edev->addrlen;
+ if (edev->addrlen == 7) {
+ cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
+ bits = 10;
+ } else {
+ cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
+ bits = 9;
+ }
+
+ dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr);
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ t.tx_buf = &cmd_addr;
+ t.len = 2;
+ t.bits_per_word = bits;
+ spi_message_add_tail(&t, &m);
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ ret = spi_sync(edev->spi, &m);
+ /* have to wait at least Tcsl ns */
+ ndelay(250);
+ if (ret)
+ dev_err(&edev->spi->dev, "erase/write %sable error %d\n",
+ is_on ? "en" : "dis", ret);
+
+ if (edev->pdata->finish)
+ edev->pdata->finish(edev);
+
+ mutex_unlock(&edev->lock);
+ return ret;
+}
+
+static ssize_t
+eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
+ const char *buf, unsigned off)
+{
+ struct spi_message m;
+ struct spi_transfer t[2];
+ int bits, data_len, ret;
+ u16 cmd_addr;
+
+ cmd_addr = OP_WRITE << edev->addrlen;
+
+ if (edev->addrlen == 7) {
+ cmd_addr |= off & 0x7f;
+ bits = 10;
+ data_len = 1;
+ } else {
+ cmd_addr |= off & 0x3f;
+ bits = 9;
+ data_len = 2;
+ }
+
+ dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = (char *)&cmd_addr;
+ t[0].len = 2;
+ t[0].bits_per_word = bits;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = data_len;
+ t[1].bits_per_word = 8;
+ spi_message_add_tail(&t[1], &m);
+
+ ret = spi_sync(edev->spi, &m);
+ /* have to wait program cycle time Twc ms */
+ mdelay(6);
+ return ret;
+}
+
+static ssize_t
+eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct eeprom_93xx46_dev *edev;
+ struct device *dev;
+ int i, ret, step = 1;
+
+ dev = container_of(kobj, struct device, kobj);
+ edev = dev_get_drvdata(dev);
+
+ if (unlikely(off >= edev->bin.size))
+ return 0;
+ if ((off + count) > edev->bin.size)
+ count = edev->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ /* only write even number of bytes on 16-bit devices */
+ if (edev->addrlen == 6) {
+ step = 2;
+ count &= ~1;
+ }
+
+ /* erase/write enable */
+ ret = eeprom_93xx46_ew(edev, 1);
+ if (ret)
+ return ret;
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ for (i = 0; i < count; i += step) {
+ ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
+ if (ret) {
+ dev_err(&edev->spi->dev, "write failed at %d: %d\n",
+ (int)off + i, ret);
+ break;
+ }
+ }
+
+ if (edev->pdata->finish)
+ edev->pdata->finish(edev);
+
+ mutex_unlock(&edev->lock);
+
+ /* erase/write disable */
+ eeprom_93xx46_ew(edev, 0);
+ return ret ? : count;
+}
+
+static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
+{
+ struct eeprom_93xx46_platform_data *pd = edev->pdata;
+ struct spi_message m;
+ struct spi_transfer t;
+ int bits, ret;
+ u16 cmd_addr;
+
+ cmd_addr = OP_START << edev->addrlen;
+ if (edev->addrlen == 7) {
+ cmd_addr |= ADDR_ERAL << 1;
+ bits = 10;
+ } else {
+ cmd_addr |= ADDR_ERAL;
+ bits = 9;
+ }
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ t.tx_buf = &cmd_addr;
+ t.len = 2;
+ t.bits_per_word = bits;
+ spi_message_add_tail(&t, &m);
+
+ mutex_lock(&edev->lock);
+
+ if (edev->pdata->prepare)
+ edev->pdata->prepare(edev);
+
+ ret = spi_sync(edev->spi, &m);
+ if (ret)
+ dev_err(&edev->spi->dev, "erase error %d\n", ret);
+ /* have to wait erase cycle time Tec ms */
+ mdelay(6);
+
+ if (pd->finish)
+ pd->finish(edev);
+
+ mutex_unlock(&edev->lock);
+ return ret;
+}
+
+static ssize_t eeprom_93xx46_store_erase(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
+ int erase = 0, ret;
+
+ sscanf(buf, "%d", &erase);
+ if (erase) {
+ ret = eeprom_93xx46_ew(edev, 1);
+ if (ret)
+ return ret;
+ ret = eeprom_93xx46_eral(edev);
+ if (ret)
+ return ret;
+ ret = eeprom_93xx46_ew(edev, 0);
+ if (ret)
+ return ret;
+ }
+ return count;
+}
+static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
+
+static int __devinit eeprom_93xx46_probe(struct spi_device *spi)
+{
+ struct eeprom_93xx46_platform_data *pd;
+ struct eeprom_93xx46_dev *edev;
+ int err;
+
+ pd = spi->dev.platform_data;
+ if (!pd) {
+ dev_err(&spi->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+ if (!edev)
+ return -ENOMEM;
+
+ if (pd->flags & EE_ADDR8)
+ edev->addrlen = 7;
+ else if (pd->flags & EE_ADDR16)
+ edev->addrlen = 6;
+ else {
+ dev_err(&spi->dev, "unspecified address type\n");
+ err = -EINVAL;
+ goto fail;
+ }
+
+ mutex_init(&edev->lock);
+
+ edev->spi = spi_dev_get(spi);
+ edev->pdata = pd;
+
+ sysfs_bin_attr_init(&edev->bin);
+ edev->bin.attr.name = "eeprom";
+ edev->bin.attr.mode = S_IRUSR;
+ edev->bin.read = eeprom_93xx46_bin_read;
+ edev->bin.size = 128;
+ if (!(pd->flags & EE_READONLY)) {
+ edev->bin.write = eeprom_93xx46_bin_write;
+ edev->bin.attr.mode |= S_IWUSR;
+ }
+
+ err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin);
+ if (err)
+ goto fail;
+
+ dev_info(&spi->dev, "%d-bit eeprom %s\n",
+ (pd->flags & EE_ADDR8) ? 8 : 16,
+ (pd->flags & EE_READONLY) ? "(readonly)" : "");
+
+ if (!(pd->flags & EE_READONLY)) {
+ if (device_create_file(&spi->dev, &dev_attr_erase))
+ dev_err(&spi->dev, "can't create erase interface\n");
+ }
+
+ dev_set_drvdata(&spi->dev, edev);
+ return 0;
+fail:
+ kfree(edev);
+ return err;
+}
+
+static int __devexit eeprom_93xx46_remove(struct spi_device *spi)
+{
+ struct eeprom_93xx46_dev *edev = dev_get_drvdata(&spi->dev);
+
+ if (!(edev->pdata->flags & EE_READONLY))
+ device_remove_file(&spi->dev, &dev_attr_erase);
+
+ sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(edev);
+ return 0;
+}
+
+static struct spi_driver eeprom_93xx46_driver = {
+ .driver = {
+ .name = "93xx46",
+ .owner = THIS_MODULE,
+ },
+ .probe = eeprom_93xx46_probe,
+ .remove = __devexit_p(eeprom_93xx46_remove),
+};
+
+static int __init eeprom_93xx46_init(void)
+{
+ return spi_register_driver(&eeprom_93xx46_driver);
+}
+module_init(eeprom_93xx46_init);
+
+static void __exit eeprom_93xx46_exit(void)
+{
+ spi_unregister_driver(&eeprom_93xx46_driver);
+}
+module_exit(eeprom_93xx46_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_ALIAS("spi:93xx46");
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-28 00:26:47 +0000