aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/twl4030-irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/twl4030-irq.c')
-rw-r--r--drivers/mfd/twl4030-irq.c162
1 files changed, 143 insertions, 19 deletions
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index fb194fe244c..9df9a5ad38f 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -32,7 +32,7 @@
#include <linux/irq.h>
#include <linux/kthread.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
/*
@@ -74,6 +74,8 @@ struct sih {
u8 edr_offset;
u8 bytes_edr; /* bytelen of EDR */
+ u8 irq_lines; /* number of supported irq lines */
+
/* SIR ignored -- set interrupt, for testing only */
struct irq_data {
u8 isr_offset;
@@ -82,6 +84,9 @@ struct sih {
/* + 2 bytes padding */
};
+static const struct sih *sih_modules;
+static int nr_sih_modules;
+
#define SIH_INITIALIZER(modname, nbits) \
.module = TWL4030_MODULE_ ## modname, \
.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
@@ -89,6 +94,7 @@ struct sih {
.bytes_ixr = DIV_ROUND_UP(nbits, 8), \
.edr_offset = TWL4030_ ## modname ## _EDR, \
.bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
+ .irq_lines = 2, \
.mask = { { \
.isr_offset = TWL4030_ ## modname ## _ISR1, \
.imr_offset = TWL4030_ ## modname ## _IMR1, \
@@ -107,7 +113,8 @@ struct sih {
/* Order in this table matches order in PIH_ISR. That is,
* BIT(n) in PIH_ISR is sih_modules[n].
*/
-static const struct sih sih_modules[6] = {
+/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
+static const struct sih sih_modules_twl4030[6] = {
[0] = {
.name = "gpio",
.module = TWL4030_MODULE_GPIO,
@@ -118,6 +125,7 @@ static const struct sih sih_modules[6] = {
/* Note: *all* of these IRQs default to no-trigger */
.edr_offset = REG_GPIO_EDR1,
.bytes_edr = 5,
+ .irq_lines = 2,
.mask = { {
.isr_offset = REG_GPIO_ISR1A,
.imr_offset = REG_GPIO_IMR1A,
@@ -140,6 +148,7 @@ static const struct sih sih_modules[6] = {
.edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
/* Note: most of these IRQs default to no-trigger */
.bytes_edr = 3,
+ .irq_lines = 2,
.mask = { {
.isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
.imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
@@ -164,6 +173,99 @@ static const struct sih sih_modules[6] = {
/* there are no SIH modules #6 or #7 ... */
};
+static const struct sih sih_modules_twl5031[8] = {
+ [0] = {
+ .name = "gpio",
+ .module = TWL4030_MODULE_GPIO,
+ .control_offset = REG_GPIO_SIH_CTRL,
+ .set_cor = true,
+ .bits = TWL4030_GPIO_MAX,
+ .bytes_ixr = 3,
+ /* Note: *all* of these IRQs default to no-trigger */
+ .edr_offset = REG_GPIO_EDR1,
+ .bytes_edr = 5,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = REG_GPIO_ISR1A,
+ .imr_offset = REG_GPIO_IMR1A,
+ }, {
+ .isr_offset = REG_GPIO_ISR1B,
+ .imr_offset = REG_GPIO_IMR1B,
+ }, },
+ },
+ [1] = {
+ .name = "keypad",
+ .set_cor = true,
+ SIH_INITIALIZER(KEYPAD_KEYP, 4)
+ },
+ [2] = {
+ .name = "bci",
+ .module = TWL5031_MODULE_INTERRUPTS,
+ .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
+ .bits = 7,
+ .bytes_ixr = 1,
+ .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 2,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
+ .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
+ }, {
+ .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
+ .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
+ }, },
+ },
+ [3] = {
+ .name = "madc",
+ SIH_INITIALIZER(MADC, 4)
+ },
+ [4] = {
+ /* USB doesn't use the same SIH organization */
+ .name = "usb",
+ },
+ [5] = {
+ .name = "power",
+ .set_cor = true,
+ SIH_INITIALIZER(INT_PWR, 8)
+ },
+ [6] = {
+ /*
+ * ACI doesn't use the same SIH organization.
+ * For example, it supports only one interrupt line
+ */
+ .name = "aci",
+ .module = TWL5031_MODULE_ACCESSORY,
+ .bits = 9,
+ .bytes_ixr = 2,
+ .irq_lines = 1,
+ .mask = { {
+ .isr_offset = TWL5031_ACIIDR_LSB,
+ .imr_offset = TWL5031_ACIIMR_LSB,
+ }, },
+
+ },
+ [7] = {
+ /* Accessory */
+ .name = "acc",
+ .module = TWL5031_MODULE_ACCESSORY,
+ .control_offset = TWL5031_ACCSIHCTRL,
+ .bits = 2,
+ .bytes_ixr = 1,
+ .edr_offset = TWL5031_ACCEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 1,
+ .irq_lines = 2,
+ .mask = { {
+ .isr_offset = TWL5031_ACCISR1,
+ .imr_offset = TWL5031_ACCIMR1,
+ }, {
+ .isr_offset = TWL5031_ACCISR2,
+ .imr_offset = TWL5031_ACCIMR2,
+ }, },
+ },
+};
+
#undef TWL4030_MODULE_KEYPAD_KEYP
#undef TWL4030_MODULE_INT_PWR
#undef TWL4030_INT_PWR_EDR
@@ -194,7 +296,7 @@ static int twl4030_irq_thread(void *data)
/* Wait for IRQ, then read PIH irq status (also blocking) */
wait_for_completion_interruptible(&irq_event);
- ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+ ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
REG_PIH_ISR_P1);
if (ret) {
pr_warning("twl4030: I2C error %d reading PIH ISR\n",
@@ -284,13 +386,17 @@ static int twl4030_init_sih_modules(unsigned line)
/* disable all interrupts on our line */
memset(buf, 0xff, sizeof buf);
sih = sih_modules;
- for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+ for (i = 0; i < nr_sih_modules; i++, sih++) {
/* skip USB -- it's funky */
if (!sih->bytes_ixr)
continue;
- status = twl4030_i2c_write(sih->module, buf,
+ /* Not all the SIH modules support multiple interrupt lines */
+ if (sih->irq_lines <= line)
+ continue;
+
+ status = twl_i2c_write(sih->module, buf,
sih->mask[line].imr_offset, sih->bytes_ixr);
if (status < 0)
pr_err("twl4030: err %d initializing %s %s\n",
@@ -304,7 +410,7 @@ static int twl4030_init_sih_modules(unsigned line)
* And for PWR_INT it's not documented...
*/
if (sih->set_cor) {
- status = twl4030_i2c_write_u8(sih->module,
+ status = twl_i2c_write_u8(sih->module,
TWL4030_SIH_CTRL_COR_MASK,
sih->control_offset);
if (status < 0)
@@ -314,7 +420,7 @@ static int twl4030_init_sih_modules(unsigned line)
}
sih = sih_modules;
- for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+ for (i = 0; i < nr_sih_modules; i++, sih++) {
u8 rxbuf[4];
int j;
@@ -322,20 +428,24 @@ static int twl4030_init_sih_modules(unsigned line)
if (!sih->bytes_ixr)
continue;
+ /* Not all the SIH modules support multiple interrupt lines */
+ if (sih->irq_lines <= line)
+ continue;
+
/* Clear pending interrupt status. Either the read was
* enough, or we need to write those bits. Repeat, in
* case an IRQ is pending (PENDDIS=0) ... that's not
* uncommon with PWR_INT.PWRON.
*/
for (j = 0; j < 2; j++) {
- status = twl4030_i2c_read(sih->module, rxbuf,
+ status = twl_i2c_read(sih->module, rxbuf,
sih->mask[line].isr_offset, sih->bytes_ixr);
if (status < 0)
pr_err("twl4030: err %d initializing %s %s\n",
status, sih->name, "ISR");
if (!sih->set_cor)
- status = twl4030_i2c_write(sih->module, buf,
+ status = twl_i2c_write(sih->module, buf,
sih->mask[line].isr_offset,
sih->bytes_ixr);
/* else COR=1 means read sufficed.
@@ -404,7 +514,7 @@ static void twl4030_sih_do_mask(struct work_struct *work)
return;
/* write the whole mask ... simpler than subsetting it */
- status = twl4030_i2c_write(sih->module, imr.bytes,
+ status = twl_i2c_write(sih->module, imr.bytes,
sih->mask[irq_line].imr_offset, sih->bytes_ixr);
if (status)
pr_err("twl4030: %s, %s --> %d\n", __func__,
@@ -435,7 +545,7 @@ static void twl4030_sih_do_edge(struct work_struct *work)
* any processor on the other IRQ line, EDR registers are
* shared.
*/
- status = twl4030_i2c_read(sih->module, bytes + 1,
+ status = twl_i2c_read(sih->module, bytes + 1,
sih->edr_offset, sih->bytes_edr);
if (status) {
pr_err("twl4030: %s, %s --> %d\n", __func__,
@@ -458,18 +568,18 @@ static void twl4030_sih_do_edge(struct work_struct *work)
bytes[byte] &= ~(0x03 << off);
- spin_lock_irq(&d->lock);
+ raw_spin_lock_irq(&d->lock);
if (d->status & IRQ_TYPE_EDGE_RISING)
bytes[byte] |= BIT(off + 1);
if (d->status & IRQ_TYPE_EDGE_FALLING)
bytes[byte] |= BIT(off + 0);
- spin_unlock_irq(&d->lock);
+ raw_spin_unlock_irq(&d->lock);
edge_change &= ~BIT(i);
}
/* Write */
- status = twl4030_i2c_write(sih->module, bytes,
+ status = twl_i2c_write(sih->module, bytes,
sih->edr_offset, sih->bytes_edr);
if (status)
pr_err("twl4030: %s, %s --> %d\n", __func__,
@@ -554,7 +664,7 @@ static inline int sih_read_isr(const struct sih *sih)
/* FIXME need retry-on-error ... */
isr.word = 0;
- status = twl4030_i2c_read(sih->module, isr.bytes,
+ status = twl_i2c_read(sih->module, isr.bytes,
sih->mask[irq_line].isr_offset, sih->bytes_ixr);
return (status < 0) ? status : le32_to_cpu(isr.word);
@@ -611,7 +721,7 @@ int twl4030_sih_setup(int module)
/* only support modules with standard clear-on-read for now */
for (sih_mod = 0, sih = sih_modules;
- sih_mod < ARRAY_SIZE(sih_modules);
+ sih_mod < nr_sih_modules;
sih_mod++, sih++) {
if (sih->module == module && sih->set_cor) {
if (!WARN((irq_base + sih->bits) > NR_IRQS,
@@ -668,7 +778,7 @@ int twl4030_sih_setup(int module)
/* FIXME pass in which interrupt line we'll use ... */
#define twl_irq_line 0
-int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
{
static struct irq_chip twl4030_irq_chip;
@@ -728,7 +838,8 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
goto fail_rqirq;
}
- task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+ task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
+ "twl4030-irq");
if (IS_ERR(task)) {
pr_err("twl4030: could not create irq %d thread!\n", irq_num);
status = PTR_ERR(task);
@@ -747,7 +858,7 @@ fail:
return status;
}
-int twl_exit_irq(void)
+int twl4030_exit_irq(void)
{
/* FIXME undo twl_init_irq() */
if (twl4030_irq_base) {
@@ -756,3 +867,16 @@ int twl_exit_irq(void)
}
return 0;
}
+
+int twl4030_init_chip_irq(const char *chip)
+{
+ if (!strcmp(chip, "twl5031")) {
+ sih_modules = sih_modules_twl5031;
+ nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
+ } else {
+ sih_modules = sih_modules_twl4030;
+ nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
+ }
+
+ return 0;
+}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-29 02:13:07 +0000