diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 81 |
1 files changed, 64 insertions, 17 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index fd018366d67..3ed3ff06be5 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -60,15 +60,6 @@ config MFD_ASIC3 This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) -config MFD_SH_MOBILE_SDHI - bool "Support for SuperH Mobile SDHI" - depends on SUPERH || ARCH_SHMOBILE - select MFD_CORE - select TMIO_MMC_DMA - ---help--- - This driver supports the SDHI hardware block found in many - SuperH Mobile SoCs. - config MFD_DAVINCI_VOICECODEC tristate select MFD_CORE @@ -81,6 +72,17 @@ config MFD_DM355EVM_MSP boards. MSP430 firmware manages resets and power sequencing, inputs from buttons and the IR remote, LEDs, an RTC, and more. +config MFD_TI_SSP + tristate "TI Sequencer Serial Port support" + depends on ARCH_DAVINCI_TNETV107X + select MFD_CORE + ---help--- + Say Y here if you want support for the Sequencer Serial Port + in a Texas Instruments TNETV107X SoC. + + To compile this driver as a module, choose M here: the + module will be called ti-ssp. + config HTC_EGPIO bool "HTC EGPIO support" depends on GENERIC_HARDIRQS && GPIOLIB && ARM @@ -118,6 +120,18 @@ config UCB1400_CORE To compile this driver as a module, choose M here: the module will be called ucb1400_core. +config TPS6105X + tristate "TPS61050/61052 Boost Converters" + depends on I2C + select REGULATOR + select MFD_CORE + select REGULATOR_FIXED_VOLTAGE + help + This option enables a driver for the TP61050/TPS61052 + high-power "white LED driver". This boost converter is + sometimes used for other things than white LEDs, and + also contains a GPIO pin. + config TPS65010 tristate "TPS6501x Power Management chips" depends on I2C && GPIOLIB @@ -167,6 +181,16 @@ config TWL4030_CORE high speed USB OTG transceiver, an audio codec (on most versions) and many other features. +config TWL4030_MADC + tristate "Texas Instruments TWL4030 MADC" + depends on TWL4030_CORE + help + This driver provides support for triton TWL4030-MADC. The + driver supports both RT and SW conversion methods. + + This driver can be built as a module. If so it will be + named twl4030-madc + config TWL4030_POWER bool "Support power resources on TWL4030 family chips" depends on TWL4030_CORE && ARM @@ -177,7 +201,7 @@ config TWL4030_POWER as clock request handshaking. This driver uses board-specific data to initialize the resources - and load scripts controling which resources are switched off/on + and load scripts controlling which resources are switched off/on or reset when a sleep, wakeup or warm reset event occurs. config TWL4030_CODEC @@ -233,11 +257,6 @@ config MFD_TMIO bool default n -config TMIO_MMC_DMA - bool - select DMA_ENGINE - select DMADEVICES - config MFD_T7L66XB bool "Support Toshiba T7L66XB" depends on ARM && HAVE_CLK @@ -293,6 +312,18 @@ config MFD_MAX8925 accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX8997 + bool "Maxim Semiconductor MAX8997/8966 PMIC Support" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + help + Say yes here to support for Maxim Semiconductor MAX8998/8966. + This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, + MUIC controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX8998 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS @@ -523,6 +554,13 @@ config AB8500_DEBUG Select this option if you want debug information using the debug filesystem, debugfs. +config AB8500_GPADC + bool "AB8500 GPADC driver" + depends on AB8500_CORE && REGULATOR_AB8500 + default y + help + AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage + config AB3550_CORE bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions" select MFD_CORE @@ -540,7 +578,7 @@ config AB3550_CORE config MFD_CS5535 tristate "Support for CS5535 and CS5536 southbridge core functions" select MFD_CORE - depends on PCI + depends on PCI && X86 ---help--- This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. @@ -615,7 +653,7 @@ config MFD_VX855 and/or vx855_gpio drivers for this to do anything useful. config MFD_WL1273_CORE - tristate + tristate "Support for TI WL1273 FM radio." depends on I2C select MFD_CORE default n @@ -624,6 +662,15 @@ config MFD_WL1273_CORE driver connects the radio-wl1273 V4L2 module and the wl1273 audio codec. +config MFD_OMAP_USB_HOST + bool "Support OMAP USBHS core driver" + depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 + default y + help + This is the core driver for the OAMP EHCI and OHCI drivers. + This MFD driver does the required setup functionalities for + OMAP USB Host drivers. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" |