diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 75 |
1 files changed, 74 insertions, 1 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 9da0e504bbe..db51ea1c608 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -7,7 +7,16 @@ menuconfig MFD_SUPPORT depends on HAS_IOMEM default y help - Configure MFD device drivers. + Multifunction devices embed several functions (e.g. GPIOs, + touchscreens, keyboards, current regulators, power management chips, + etc...) in one single integrated circuit. They usually talk to the + main CPU through one or more IRQ lines and low speed data busses (SPI, + I2C, etc..). They appear as one single device to the main system + through the data bus and the MFD framework allows for sub devices + (a.k.a. functions) to appear as discrete platform devices. + MFDs are typically found on embedded platforms. + + This option alone does not add any kernel code. if MFD_SUPPORT @@ -177,6 +186,38 @@ config TWL4030_CODEC select MFD_CORE default n +config TWL6030_PWM + tristate "TWL6030 PWM (Pulse Width Modulator) Support" + depends on TWL4030_CORE + select HAVE_PWM + default n + help + Say yes here if you want support for TWL6030 PWM. + This is used to control charging LED brightness. + +config MFD_STMPE + bool "Support STMicroelectronics STMPE" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + help + Support for the STMPE family of I/O Expanders from + STMicroelectronics. + + Currently supported devices are: + + STMPE811: GPIO, Touchscreen + STMPE1601: GPIO, Keypad + STMPE2401: GPIO, Keypad + STMPE2403: GPIO, Keypad + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. Currently available sub drivers are: + + GPIO: stmpe-gpio + Keypad: stmpe-keypad + Touchscreen: stmpe-ts + config MFD_TC35892 bool "Support Toshiba TC35892" depends on I2C=y && GENERIC_HARDIRQS @@ -252,6 +293,16 @@ config MFD_MAX8925 accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX8998 + bool "Maxim Semiconductor MAX8998 PMIC Support" + depends on I2C=y + select MFD_CORE + help + Say yes here to support for Maxim Semiconductor MAX8998. This is + a Power Management IC. This driver provies common support for + accessing the device, additional drivers must be enabled in order + to use the functionality of the device. + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" select MFD_CORE @@ -482,6 +533,28 @@ config MFD_JANZ_CMODIO host many different types of MODULbus daughterboards, including CAN and GPIO controllers. +config MFD_JZ4740_ADC + tristate "Support for the JZ4740 SoC ADC core" + select MFD_CORE + depends on MACH_JZ4740 + help + Say yes here if you want support for the ADC unit in the JZ4740 SoC. + This driver is necessary for jz4740-battery and jz4740-hwmon driver. + +config MFD_TPS6586X + tristate "TPS6586x Power Management chips" + depends on I2C && GPIOLIB + select MFD_CORE + help + If you say yes here you get support for the TPS6586X series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + + This driver can also be built as a module. If so, the module + will be called tps6586x. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" |