aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/video/gspca/sonixb.c170
1 files changed, 122 insertions, 48 deletions
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index dc2d88cdd4a..66fffa345e7 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -176,7 +176,7 @@ static const struct ctrl sd_ctrls[] = {
.maximum = 255,
.step = 1,
#define GAIN_DEF 127
-#define GAIN_KNEE 200
+#define GAIN_KNEE 230
.default_value = GAIN_DEF,
},
.set = sd_setgain,
@@ -188,10 +188,10 @@ static const struct ctrl sd_ctrls[] = {
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Exposure",
-#define EXPOSURE_DEF 33 /* 33 ms / 30 fps */
-#define EXPOSURE_KNEE 100 /* 100 ms / 10 fps */
+#define EXPOSURE_DEF 66 /* 33 ms / 30 fps (except on PAS202) */
+#define EXPOSURE_KNEE 200 /* 100 ms / 10 fps (except on PAS202) */
.minimum = 0,
- .maximum = 511,
+ .maximum = 1023,
.step = 1,
.default_value = EXPOSURE_DEF,
.flags = 0,
@@ -454,31 +454,41 @@ static const __u8 initPas202[] = {
0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
- 0x28, 0x1e, 0x28, 0x89, 0x20,
+ 0x28, 0x1e, 0x20, 0x89, 0x20,
0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
};
+
+/* "Known" PAS202BCB registers:
+ 0x02 clock divider
+ 0x04 Variable framerate bits 6-11 (*)
+ 0x05 Var framerate bits 0-5, one must leave the 2 msb's at 0 !!
+ 0x07 Blue Gain
+ 0x08 Green Gain
+ 0x09 Red Gain
+ 0x0b offset sign bit (bit0 1 > negative offset)
+ 0x0c offset
+ 0x0e Unknown image is slightly brighter when bit 0 is 0, if reg0f is 0 too,
+ leave at 1 otherwise we get a jump in our exposure control
+ 0x0f Exposure 0-255, 0 = use full frame time, 255 = no exposure at all
+ 0x10 Master gain 0 - 31
+ 0x11 write 1 to apply changes
+ (*) The variable framerate control must never be set lower then 500
+ which sets the framerate at 30 / reg02, otherwise vsync is lost.
+*/
static const __u8 pas202_sensor_init[][8] = {
- {0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10},
+ /* Set the clock divider to 4 -> 30 / 4 = 7.5 fps, we would like
+ to set it lower, but for some reason the bridge starts missing
+ vsync's then */
+ {0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},
{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},
{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},
- {0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x00, 0x32, 0x10},
+ {0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},
{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x03, 0x56, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10},
- {0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x10},
- {0xb0, 0x40, 0x0e, 0x00, 0x3d, 0x00, 0x63, 0x10},
-
- {0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x10, 0x08, 0x3d, 0x00, 0x63, 0x15},
- {0xa0, 0x40, 0x02, 0x04, 0x3d, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16},
- {0xb0, 0x40, 0x0e, 0x00, 0x31, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
- {0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15},
- {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
};
static const __u8 initTas5110c[] = {
@@ -524,8 +534,8 @@ SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
F_GAIN, 0, 0x21),
SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
0),
-SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
- NO_EXPO|NO_FREQ, 0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_GAIN,
+ NO_FREQ, 0),
SENS(initTas5110c, NULL, tas5110_sensor_init, NULL, NULL,
F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0),
SENS(initTas5110d, NULL, tas5110_sensor_init, NULL, NULL,
@@ -633,27 +643,20 @@ static void setbrightness(struct gspca_dev *gspca_dev)
break;
}
case SENSOR_PAS202: {
- /* __u8 i2cpexpo1[] =
- {0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x16}; */
- __u8 i2cpexpo[] =
- {0xb0, 0x40, 0x0e, 0x01, 0xab, 0x00, 0x63, 0x16};
- __u8 i2cp202[] =
- {0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15};
- static __u8 i2cpdoit[] =
- {0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16};
-
- /* change reg 0x10 */
- i2cpexpo[4] = 0xff - sd->brightness;
-/* if(i2c_w(gspca_dev,i2cpexpo1) < 0)
- goto err; */
-/* if(i2c_w(gspca_dev,i2cpdoit) < 0)
- goto err; */
- if (i2c_w(gspca_dev, i2cpexpo) < 0)
- goto err;
- if (i2c_w(gspca_dev, i2cpdoit) < 0)
- goto err;
- i2cp202[3] = sd->brightness >> 3;
- if (i2c_w(gspca_dev, i2cp202) < 0)
+ __u8 i2cpbright[] =
+ {0xb0, 0x40, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x16};
+ const __u8 i2cpdoit[] =
+ {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
+
+ if (sd->brightness < 127) {
+ /* change reg 0x0b, signreg */
+ i2cpbright[3] = 0x01;
+ /* set reg 0x0c, offset */
+ i2cpbright[4] = 127 - sd->brightness;
+ } else
+ i2cpbright[4] = sd->brightness - 127;
+
+ if (i2c_w(gspca_dev, i2cpbright) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpdoit) < 0)
goto err;
@@ -706,6 +709,27 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
goto err;
break;
}
+ case SENSOR_PAS202: {
+ __u8 i2cpgain[] =
+ {0xa0, 0x40, 0x10, 0x00, 0x00, 0x00, 0x63, 0x15};
+ __u8 i2cpcolorgain[] =
+ {0xc0, 0x40, 0x07, 0x00, 0x00, 0x00, 0x00, 0x15};
+ const __u8 i2cpdoit[] =
+ {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x63, 0x16};
+
+ i2cpgain[3] = sd->gain >> 3;
+ i2cpcolorgain[3] = sd->gain >> 4;
+ i2cpcolorgain[4] = sd->gain >> 4;
+ i2cpcolorgain[5] = sd->gain >> 4;
+
+ if (i2c_w(gspca_dev, i2cpgain) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpcolorgain) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpdoit) < 0)
+ goto err;
+ break;
+ }
}
return;
err:
@@ -779,7 +803,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
} else
reg10_max = 0x41;
- reg11 = (30 * sd->exposure + 999) / 1000;
+ reg11 = (15 * sd->exposure + 999) / 1000;
if (reg11 < 1)
reg11 = 1;
else if (reg11 > 16)
@@ -791,8 +815,8 @@ static void setexposure(struct gspca_dev *gspca_dev)
reg11 = 3;
/* frame exposure time in ms = 1000 * reg11 / 30 ->
- reg10 = sd->exposure * reg10_max / (1000 * reg11 / 30) */
- reg10 = (sd->exposure * 30 * reg10_max) / (1000 * reg11);
+ reg10 = (sd->exposure / 2) * reg10_max / (1000 * reg11 / 30) */
+ reg10 = (sd->exposure * 15 * reg10_max) / (1000 * reg11);
/* Don't allow this to get below 10 when using autogain, the
steps become very large (relatively) when below 10 causing
@@ -815,10 +839,53 @@ static void setexposure(struct gspca_dev *gspca_dev)
if (i2c_w(gspca_dev, i2c) == 0)
sd->reg11 = reg11;
else
- PDEBUG(D_ERR, "i2c error exposure");
+ goto err;
+ break;
+ }
+ case SENSOR_PAS202: {
+ __u8 i2cpframerate[] =
+ {0xb0, 0x40, 0x04, 0x00, 0x00, 0x00, 0x00, 0x16};
+ __u8 i2cpexpo[] =
+ {0xa0, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x16};
+ const __u8 i2cpdoit[] =
+ {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
+ int framerate_ctrl;
+
+ /* The exposure knee for the autogain algorithm is 200
+ (100 ms / 10 fps on other sensors), for values below this
+ use the control for setting the partial frame expose time,
+ above that use variable framerate. This way we run at max
+ framerate (640x480@7.5 fps, 320x240@10fps) until the knee
+ is reached. Using the variable framerate control above 200
+ is better then playing around with both clockdiv + partial
+ frame exposure times (like we are doing with the ov chips),
+ as that sometimes leads to jumps in the exposure control,
+ which are bad for auto exposure. */
+ if (sd->exposure < 200) {
+ i2cpexpo[3] = 255 - (sd->exposure * 255) / 200;
+ framerate_ctrl = 500;
+ } else {
+ /* The PAS202's exposure control goes from 0 - 4095,
+ but anything below 500 causes vsync issues, so scale
+ our 200-1023 to 500-4095 */
+ framerate_ctrl = (sd->exposure - 200) * 1000 / 229 +
+ 500;
+ }
+
+ i2cpframerate[3] = framerate_ctrl >> 6;
+ i2cpframerate[4] = framerate_ctrl & 0x3f;
+ if (i2c_w(gspca_dev, i2cpframerate) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpexpo) < 0)
+ goto err;
+ if (i2c_w(gspca_dev, i2cpdoit) < 0)
+ goto err;
break;
}
}
+ return;
+err:
+ PDEBUG(D_ERR, "i2c error exposure");
}
static void setfreq(struct gspca_dev *gspca_dev)
@@ -965,9 +1032,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
/* Special cases where reg 17 and or 19 value depends on mode */
switch (sd->sensor) {
- case SENSOR_PAS202:
- reg12_19[5] = mode ? 0x24 : 0x20;
- break;
case SENSOR_TAS5130CXX:
/* probably not mode specific at all most likely the upper
nibble of 0x19 is exposure (clock divider) just as with
@@ -1003,6 +1067,16 @@ static int sd_start(struct gspca_dev *gspca_dev)
sensor_data[sd->sensor].sensor_bridge_init_size[
sd->bridge]);
+ /* Mode specific sensor setup */
+ switch (sd->sensor) {
+ case SENSOR_PAS202: {
+ const __u8 i2cpclockdiv[] =
+ {0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10};
+ /* clockdiv from 4 to 3 (7.5 -> 10 fps) when in low res mode */
+ if (mode)
+ i2c_w(gspca_dev, i2cpclockdiv);
+ }
+ }
/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
reg_w(gspca_dev, 0x15, &reg12_19[3], 2);
/* compression register */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-16 19:37:50 +0000