diff options
Diffstat (limited to 'drivers/media')
385 files changed, 32985 insertions, 10453 deletions
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 8fa91f846d5..4952aeb5dd8 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -103,6 +103,56 @@ IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE] = { EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvbt); +/* Mauro Carvalho Chehab <mchehab@infradead.org> */ +IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE] = { + [0x00] = KEY_POWER2, + [0x2e] = KEY_DOT, /* '.' */ + [0x01] = KEY_MODE, /* TV/FM */ + + [0x05] = KEY_1, + [0x06] = KEY_2, + [0x07] = KEY_3, + [0x09] = KEY_4, + [0x0a] = KEY_5, + [0x0b] = KEY_6, + [0x0d] = KEY_7, + [0x0e] = KEY_8, + [0x0f] = KEY_9, + [0x11] = KEY_0, + + [0x13] = KEY_RIGHT, /* -> */ + [0x12] = KEY_LEFT, /* <- */ + + [0x17] = KEY_SLEEP, /* Capturar Imagem */ + [0x10] = KEY_SHUFFLE, /* Amostra */ + + /* FIXME: The keys bellow aren't ok */ + + [0x43] = KEY_CHANNELUP, + [0x42] = KEY_CHANNELDOWN, + [0x1f] = KEY_VOLUMEUP, + [0x1e] = KEY_VOLUMEDOWN, + [0x0c] = KEY_ENTER, + + [0x14] = KEY_MUTE, + [0x08] = KEY_AUDIO, + + [0x03] = KEY_TEXT, + [0x04] = KEY_EPG, + [0x2b] = KEY_TV2, /* TV2 */ + + [0x1d] = KEY_RED, + [0x1c] = KEY_YELLOW, + [0x41] = KEY_GREEN, + [0x40] = KEY_BLUE, + + [0x1a] = KEY_PLAYPAUSE, + [0x19] = KEY_RECORD, + [0x18] = KEY_PLAY, + [0x1b] = KEY_STOP, +}; +EXPORT_SYMBOL_GPL(ir_codes_avermedia_m135a); + /* Attila Kondoros <attila.kondoros@chello.hu> */ IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { @@ -467,7 +517,8 @@ EXPORT_SYMBOL_GPL(ir_codes_adstech_dvb_t_pci); /* ---------------------------------------------------------------------- */ -/* MSI TV@nywhere remote */ +/* MSI TV@nywhere MASTER remote */ + IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = { /* Keys 0 to 9 */ [ 0x00 ] = KEY_0, @@ -501,6 +552,95 @@ EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere); /* ---------------------------------------------------------------------- */ +/* + Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card + is marked "KS003". The controller is I2C at address 0x30, but does not seem + to respond to probes until a read is performed from a valid device. + I don't know why... + + Note: This remote may be of similar or identical design to the + Pixelview remote (?). The raw codes and duplicate button codes + appear to be the same. + + Henry Wong <henry@stuffedcow.net> + Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com> + +*/ + +IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE] = { + +/* ---- Remote Button Layout ---- + + POWER SOURCE SCAN MUTE + TV/FM 1 2 3 + |> 4 5 6 + <| 7 8 9 + ^^UP 0 + RECALL + vvDN RECORD STOP PLAY + + MINIMIZE ZOOM + + CH+ + VOL- VOL+ + CH- + + SNAPSHOT MTS + + << FUNC >> RESET +*/ + + [0x01] = KEY_KP1, /* 1 */ + [0x0b] = KEY_KP2, /* 2 */ + [0x1b] = KEY_KP3, /* 3 */ + [0x05] = KEY_KP4, /* 4 */ + [0x09] = KEY_KP5, /* 5 */ + [0x15] = KEY_KP6, /* 6 */ + [0x06] = KEY_KP7, /* 7 */ + [0x0a] = KEY_KP8, /* 8 */ + [0x12] = KEY_KP9, /* 9 */ + [0x02] = KEY_KP0, /* 0 */ + [0x10] = KEY_KPPLUS, /* + */ + [0x13] = KEY_AGAIN, /* Recall */ + + [0x1e] = KEY_POWER, /* Power */ + [0x07] = KEY_TUNER, /* Source */ + [0x1c] = KEY_SEARCH, /* Scan */ + [0x18] = KEY_MUTE, /* Mute */ + + [0x03] = KEY_RADIO, /* TV/FM */ + /* The next four keys are duplicates that appear to send the + same IR code as Ch+, Ch-, >>, and << . The raw code assigned + to them is the actual code + 0x20 - they will never be + detected as such unless some way is discovered to distinguish + these buttons from those that have the same code. */ + [0x3f] = KEY_RIGHT, /* |> and Ch+ */ + [0x37] = KEY_LEFT, /* <| and Ch- */ + [0x2c] = KEY_UP, /* ^^Up and >> */ + [0x24] = KEY_DOWN, /* vvDn and << */ + + [0x00] = KEY_RECORD, /* Record */ + [0x08] = KEY_STOP, /* Stop */ + [0x11] = KEY_PLAY, /* Play */ + + [0x0f] = KEY_CLOSE, /* Minimize */ + [0x19] = KEY_ZOOM, /* Zoom */ + [0x1a] = KEY_SHUFFLE, /* Snapshot */ + [0x0d] = KEY_LANGUAGE, /* MTS */ + + [0x14] = KEY_VOLUMEDOWN, /* Vol- */ + [0x16] = KEY_VOLUMEUP, /* Vol+ */ + [0x17] = KEY_CHANNELDOWN, /* Ch- */ + [0x1f] = KEY_CHANNELUP, /* Ch+ */ + + [0x04] = KEY_REWIND, /* << */ + [0x0e] = KEY_MENU, /* Function */ + [0x0c] = KEY_FASTFORWARD, /* >> */ + [0x1d] = KEY_RESTART, /* Reset */ +}; +EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus); + +/* ---------------------------------------------------------------------- */ + /* Cinergy 1400 DVB-T */ IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = { [ 0x01 ] = KEY_POWER, @@ -1792,12 +1932,61 @@ IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE] = { [ 0x41 ] = KEY_GREEN, /* AP2 */ [ 0x47 ] = KEY_YELLOW, /* AP3 */ [ 0x57 ] = KEY_BLUE, /* AP4 */ - - }; - EXPORT_SYMBOL_GPL(ir_codes_encore_enltv); +/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton + Mauro Carvalho Chehab <mchehab@infradead.org> */ +IR_KEYTAB_TYPE ir_codes_encore_enltv2[IR_KEYTAB_SIZE] = { + [0x4c] = KEY_POWER2, + [0x4a] = KEY_TUNER, + [0x40] = KEY_1, + [0x60] = KEY_2, + [0x50] = KEY_3, + [0x70] = KEY_4, + [0x48] = KEY_5, + [0x68] = KEY_6, + [0x58] = KEY_7, + [0x78] = KEY_8, + [0x44] = KEY_9, + [0x54] = KEY_0, + + [0x64] = KEY_LAST, /* +100 */ + [0x4e] = KEY_AGAIN, /* Recall */ + + [0x6c] = KEY_SWITCHVIDEOMODE, /* Video Source */ + [0x5e] = KEY_MENU, + [0x56] = KEY_SCREEN, + [0x7a] = KEY_SETUP, + + [0x46] = KEY_MUTE, + [0x5c] = KEY_MODE, /* Stereo */ + [0x74] = KEY_INFO, + [0x7c] = KEY_CLEAR, + + [0x55] = KEY_UP, + [0x49] = KEY_DOWN, + [0x7e] = KEY_LEFT, + [0x59] = KEY_RIGHT, + [0x6a] = KEY_ENTER, + + [0x42] = KEY_VOLUMEUP, + [0x62] = KEY_VOLUMEDOWN, + [0x52] = KEY_CHANNELUP, + [0x72] = KEY_CHANNELDOWN, + + [0x41] = KEY_RECORD, + [0x51] = KEY_SHUFFLE, /* Snapshot */ + [0x75] = KEY_TIME, /* Timeshift */ + [0x71] = KEY_TV2, /* PIP */ + + [0x45] = KEY_REWIND, + [0x6f] = KEY_PAUSE, + [0x7d] = KEY_FORWARD, + [0x79] = KEY_STOP, +}; +EXPORT_SYMBOL_GPL(ir_codes_encore_enltv2); + /* for the Technotrend 1500 bundled remotes (grey and black): */ IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE] = { [ 0x01 ] = KEY_POWER, @@ -2239,3 +2428,86 @@ IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { [0x2a] = KEY_MENU, }; EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d); + +/* Encore ENLTV-FM v5.3 + Mauro Carvalho Chehab <mchehab@infradead.org> + */ +IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE] = { + [0x10] = KEY_POWER2, + [0x06] = KEY_MUTE, + + [0x09] = KEY_1, + [0x1d] = KEY_2, + [0x1f] = KEY_3, + [0x19] = KEY_4, + [0x1b] = KEY_5, + [0x11] = KEY_6, + [0x17] = KEY_7, + [0x12] = KEY_8, + [0x16] = KEY_9, + [0x48] = KEY_0, + + [0x04] = KEY_LIST, /* -/-- */ + [0x40] = KEY_LAST, /* recall */ + + [0x02] = KEY_MODE, /* TV/AV */ + [0x05] = KEY_SHUFFLE, /* SNAPSHOT */ + + [0x4c] = KEY_CHANNELUP, /* UP */ + [0x00] = KEY_CHANNELDOWN, /* DOWN */ + [0x0d] = KEY_VOLUMEUP, /* RIGHT */ + [0x15] = KEY_VOLUMEDOWN, /* LEFT */ + [0x49] = KEY_ENTER, /* OK */ + + [0x54] = KEY_RECORD, + [0x4d] = KEY_PLAY, /* pause */ + + [0x1e] = KEY_UP, /* video setting */ + [0x0e] = KEY_RIGHT, /* <- */ + [0x1a] = KEY_LEFT, /* -> */ + + [0x0a] = KEY_DOWN, /* video default */ + [0x0c] = KEY_ZOOM, /* hide pannel */ + [0x47] = KEY_SLEEP, /* shutdown */ +}; +EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53); + +/* Zogis Real Audio 220 - 32 keys IR */ +IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE] = { + [0x1c] = KEY_RADIO, + [0x12] = KEY_POWER2, + + [0x01] = KEY_1, + [0x02] = KEY_2, + [0x03] = KEY_3, + [0x04] = KEY_4, + [0x05] = KEY_5, + [0x06] = KEY_6, + [0x07] = KEY_7, + [0x08] = KEY_8, + [0x09] = KEY_9, + [0x00] = KEY_0, + + [0x0c] = KEY_VOLUMEUP, + [0x18] = KEY_VOLUMEDOWN, + [0x0b] = KEY_CHANNELUP, + [0x15] = KEY_CHANNELDOWN, + [0x16] = KEY_ENTER, + + [0x11] = KEY_LIST, /* Source */ + [0x0d] = KEY_AUDIO, /* stereo */ + + [0x0f] = KEY_PREVIOUS, /* Prev */ + [0x1b] = KEY_PAUSE, /* Timeshift */ + [0x1a] = KEY_NEXT, /* Next */ + + [0x0e] = KEY_STOP, + [0x1f] = KEY_PLAY, + [0x1e] = KEY_PLAYPAUSE, /* Pause */ + + [0x1d] = KEY_RECORD, + [0x13] = KEY_MUTE, + [0x19] = KEY_SHUFFLE, /* Snapshot */ + +}; +EXPORT_SYMBOL_GPL(ir_codes_real_audio_220_32_keys); diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index d01965e9692..d599d360da3 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -234,7 +234,7 @@ void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt) int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt) { __le32 *cpu; - dma_addr_t dma_addr; + dma_addr_t dma_addr = 0; cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr); if (NULL == cpu) { diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index cf6a817d505..5b34c134aa2 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -533,7 +533,7 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, memcpy(vfd, &device_template, sizeof(struct video_device)); strlcpy(vfd->name, name, sizeof(vfd->name)); vfd->release = video_device_release; - vfd->priv = dev; + video_set_drvdata(vfd, dev); // fixme: -1 should be an insmod parameter *for the extension* (like "video_nr"); if (video_register_device(vfd, type, -1) < 0) { diff --git a/drivers/media/common/tuners/mt2060.c b/drivers/media/common/tuners/mt2060.c index 1305b0e63ce..12206d75dd4 100644 --- a/drivers/media/common/tuners/mt2060.c +++ b/drivers/media/common/tuners/mt2060.c @@ -170,6 +170,9 @@ static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame b[0] = REG_LO1B1; b[1] = 0xFF; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + mt2060_writeregs(priv,b,2); freq = params->frequency / 1000; // Hz -> kHz @@ -233,6 +236,9 @@ static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame i++; } while (i<10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + return ret; } @@ -296,13 +302,35 @@ static int mt2060_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) static int mt2060_init(struct dvb_frontend *fe) { struct mt2060_priv *priv = fe->tuner_priv; - return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x33); + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = mt2060_writereg(priv, REG_VGAG, + (priv->cfg->clock_out << 6) | 0x33); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; } static int mt2060_sleep(struct dvb_frontend *fe) { struct mt2060_priv *priv = fe->tuner_priv; - return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30); + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = mt2060_writereg(priv, REG_VGAG, + (priv->cfg->clock_out << 6) | 0x30); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; } static int mt2060_release(struct dvb_frontend *fe) @@ -344,6 +372,9 @@ struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter priv->i2c = i2c; priv->if1_freq = if1; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) { kfree(priv); return NULL; @@ -360,6 +391,9 @@ struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter mt2060_calibrate(priv); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + return fe; } EXPORT_SYMBOL(mt2060_attach); diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 227642b044a..a8878244bb3 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -3481,7 +3481,9 @@ static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum, } ctrlVal = 0; for (k = 0; k < state->MXL_Ctrl[i].size; k++) - ctrlVal += state->MXL_Ctrl[i].val[k] * (1 << k); + ctrlVal += state-> + MXL_Ctrl[i].val[k] * + (1 << k); } else return -1; } @@ -3581,7 +3583,7 @@ static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit, static u32 MXL_Ceiling(u32 value, u32 resolution) { - return (value/resolution + (value % resolution > 0 ? 1 : 0)); + return value / resolution + (value % resolution > 0 ? 1 : 0); } /* Retrieve the Initialzation Registers */ @@ -3910,7 +3912,10 @@ static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable, static int mxl5005s_init(struct dvb_frontend *fe) { + struct mxl5005s_state *state = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + state->current_mode = MXL_QAM; return mxl5005s_reconfigure(fe, MXL_QAM, MXL5005S_BANDWIDTH_6MHZ); } @@ -4092,7 +4097,6 @@ struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe, state->frontend = fe; state->config = config; state->i2c = i2c; - state->current_mode = MXL_QAM; printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n", config->i2c_address); diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index cb25e43502f..64379f2bf23 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -979,7 +979,6 @@ struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe, switch (instance) { case 0: goto fail; - break; case 1: /* new tuner instance */ state->config = cfg; diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 93063c6fbbf..1b48b5d0bf1 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -1155,7 +1155,6 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, switch (instance) { case 0: goto fail; - break; case 1: /* new tuner instance */ priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c index 8555d9cf905..4a74f65e759 100644 --- a/drivers/media/common/tuners/tda827x.c +++ b/drivers/media/common/tuners/tda827x.c @@ -447,17 +447,19 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, else arg = 0; } - if (priv->cfg->tuner_callback) - priv->cfg->tuner_callback(priv->i2c_adap->algo_data, - gp_func, arg); + if (fe->callback) + fe->callback(priv->i2c_adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, + gp_func, arg); buf[1] = high ? 0 : 1; if (priv->cfg->config == 2) buf[1] = high ? 1 : 0; i2c_transfer(priv->i2c_adap, &msg, 1); break; case 3: /* switch with GPIO of saa713x */ - if (priv->cfg->tuner_callback) - priv->cfg->tuner_callback(priv->i2c_adap->algo_data, 0, high); + if (fe->callback) + fe->callback(priv->i2c_adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, 0, high); break; } } diff --git a/drivers/media/common/tuners/tda827x.h b/drivers/media/common/tuners/tda827x.h index 7850a9a1dc8..7d72ce0a0c2 100644 --- a/drivers/media/common/tuners/tda827x.h +++ b/drivers/media/common/tuners/tda827x.h @@ -36,7 +36,6 @@ struct tda827x_config /* interface to tda829x driver */ unsigned int config; int switch_addr; - int (*tuner_callback) (void *dev, int command, int arg); void (*agcf)(struct dvb_frontend *fe); }; diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 91204d3f282..c112bdd4e0f 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -672,10 +672,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; priv->i2c_props.name = "tda829x"; - if (cfg) { + if (cfg) priv->cfg.config = cfg->lna_cfg; - priv->cfg.tuner_callback = cfg->tuner_callback; - } if (tda8290_probe(&priv->i2c_props) == 0) { priv->ver = TDA8290; diff --git a/drivers/media/common/tuners/tda8290.h b/drivers/media/common/tuners/tda8290.h index aa074f3f0c0..7e288b26fcc 100644 --- a/drivers/media/common/tuners/tda8290.h +++ b/drivers/media/common/tuners/tda8290.h @@ -22,7 +22,6 @@ struct tda829x_config { unsigned int lna_cfg; - int (*tuner_callback) (void *dev, int command, int arg); unsigned int probe_tuner:1; #define TDA829X_PROBE_TUNER 0 diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c index 72abf0b7348..ff1788cc5d4 100644 --- a/drivers/media/common/tuners/tda9887.c +++ b/drivers/media/common/tuners/tda9887.c @@ -686,7 +686,6 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, case 0: mutex_unlock(&tda9887_list_mutex); return NULL; - break; case 1: fe->analog_demod_priv = priv; priv->mode = T_STANDBY; diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index aa773a658a2..fb3f3b3adab 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -142,6 +142,7 @@ static inline int tuner_stereo(const int type, const int status) case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FM1256_IH3: case TUNER_LG_NTSC_TAPE: + case TUNER_TCL_MF02GIP_5N: return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); default: return status & TUNER_STEREO; @@ -492,8 +493,10 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: case TUNER_LG_NTSC_TAPE: case TUNER_PHILIPS_FM1256_IH3: + case TUNER_TCL_MF02GIP_5N: buffer[3] = 0x19; break; case TUNER_TNF_5335MF: @@ -765,6 +768,7 @@ static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf, switch (priv->type) { case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ && params->frequency >= 158870000) buf[3] |= 0x08; @@ -1038,7 +1042,6 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, case 0: mutex_unlock(&tuner_simple_list_mutex); return NULL; - break; case 1: fe->tuner_priv = priv; diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 10dddca8b5d..7c0bc064c00 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -946,7 +946,7 @@ static struct tuner_params tuner_tena_9533_di_params[] = { }, }; -/* ------------ TUNER_PHILIPS_FMD1216ME_MK3 - Philips PAL ------------ */ +/* ------------ TUNER_PHILIPS_FMD1216ME(X)_MK3 - Philips PAL ------------ */ static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = { { 16 * 160.00 /*MHz*/, 0x86, 0x51, }, @@ -984,6 +984,27 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { }, }; +static struct tuner_params tuner_philips_fmd1216mex_mk3_params[] = { + { + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_philips_fmd1216me_mk3_pal_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges), + .has_tda9887 = 1, + .port1_active = 1, + .port2_active = 1, + .port2_fm_high_sensitivity = 1, + .port2_invert_for_secam_lc = 1, + .port1_set_for_fm_mono = 1, + .radio_if = 1, + .fm_gain_normal = 1, + }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_philips_fmd1216me_mk3_dvb_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges), + .iffreq = 16 * 36.125, /*MHz*/ + }, +}; /* ------ TUNER_LG_TDVS_H06XF - LG INNOTEK / INFINEON ATSC ----- */ @@ -1216,6 +1237,23 @@ static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = { }, }; +/* ------------ TUNER_TCL_MF02GIP-5N-E - TCL MF02GIP-5N ------------ */ + +static struct tuner_range tuner_tcl_mf02gip_5n_ntsc_ranges[] = { + { 16 * 172.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 448.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, +}; + +static struct tuner_params tuner_tcl_mf02gip_5n_params[] = { + { + .type = TUNER_PARAM_TYPE_NTSC, + .ranges = tuner_tcl_mf02gip_5n_ntsc_ranges, + .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_ntsc_ranges), + .cb_first_if_lower_freq = 1, + }, +}; + /* --------------------------------------------------------------------- */ struct tunertype tuners[] = { @@ -1641,6 +1679,21 @@ struct tunertype tuners[] = { .name = "Xceive 5000 tuner", /* see xc5000.c for details */ }, + [TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */ + .name = "TCL tuner MF02GIP-5N-E", + .params = tuner_tcl_mf02gip_5n_params, + .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params), + }, + [TUNER_PHILIPS_FMD1216MEX_MK3] = { /* Philips PAL */ + .name = "Philips FMD1216MEX MK3 Hybrid Tuner", + .params = tuner_philips_fmd1216mex_mk3_params, + .count = ARRAY_SIZE(tuner_philips_fmd1216mex_mk3_params), + .min = 16 * 50.87, + .max = 16 * 858.00, + .stepsize = 166667, + .initdata = tua603x_agc112, + .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 }, + }, }; EXPORT_SYMBOL(tuners); diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 4dd1d2421cc..b65e6803e6c 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -71,9 +71,6 @@ struct firmware_properties { struct xc2028_data { struct list_head hybrid_tuner_instance_list; struct tuner_i2c_props i2c_props; - int (*tuner_callback) (void *dev, - int command, int arg); - void *video_dev; __u32 frequency; struct firmware_description *firm; @@ -492,6 +489,23 @@ ret: return i; } +static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg) +{ + struct xc2028_data *priv = fe->tuner_priv; + + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + + return (!fe->callback) ? -EINVAL : + fe->callback(((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : priv->i2c_props.adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, cmd, arg); +} + static int load_firmware(struct dvb_frontend *fe, unsigned int type, v4l2_std_id *id) { @@ -530,8 +544,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, if (!size) { /* Special callback command received */ - rc = priv->tuner_callback(priv->video_dev, - XC2028_TUNER_RESET, 0); + rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0); if (rc < 0) { tuner_err("Error at RESET code %d\n", (*p) & 0x7f); @@ -542,8 +555,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, if (size >= 0xff00) { switch (size) { case 0xff00: - rc = priv->tuner_callback(priv->video_dev, - XC2028_RESET_CLK, 0); + rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0); if (rc < 0) { tuner_err("Error at RESET code %d\n", (*p) & 0x7f); @@ -715,8 +727,7 @@ retry: memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); /* Reset is needed before loading firmware */ - rc = priv->tuner_callback(priv->video_dev, - XC2028_TUNER_RESET, 0); + rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0); if (rc < 0) goto fail; @@ -933,7 +944,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, The reset CLK is needed only with tm6000. Driver should work fine even if this fails. */ - priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1); + do_tuner_callback(fe, XC2028_RESET_CLK, 1); msleep(10); @@ -1002,11 +1013,6 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_dbg("%s called\n", __func__); - if (priv->ctrl.d2633) - type |= D2633; - else - type |= D2620; - switch(fe->ops.info.type) { case FE_OFDM: bw = p->u.ofdm.bandwidth; @@ -1021,10 +1027,8 @@ static int xc2028_set_params(struct dvb_frontend *fe, break; case FE_ATSC: bw = BANDWIDTH_6_MHZ; - /* The only ATSC firmware (at least on v2.7) is D2633, - so overrides ctrl->d2633 */ - type |= ATSC| D2633; - type &= ~D2620; + /* The only ATSC firmware (at least on v2.7) is D2633 */ + type |= ATSC | D2633; break; /* DVB-S is not supported */ default: @@ -1057,6 +1061,28 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_err("error: bandwidth not supported.\n"); }; + /* + Selects between D2633 or D2620 firmware. + It doesn't make sense for ATSC, since it should be D2633 on all cases + */ + if (fe->ops.info.type != FE_ATSC) { + switch (priv->ctrl.type) { + case XC2028_D2633: + type |= D2633; + break; + case XC2028_D2620: + type |= D2620; + break; + case XC2028_AUTO: + default: + /* Zarlink seems to need D2633 */ + if (priv->ctrl.demod == XC3028_FE_ZARLINK456) + type |= D2633; + else + type |= D2620; + } + } + /* All S-code tables need a 200kHz shift */ if (priv->ctrl.demod) demod = priv->ctrl.demod + 200; @@ -1177,20 +1203,10 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, break; case 1: /* new tuner instance */ - priv->tuner_callback = cfg->callback; priv->ctrl.max_len = 13; mutex_init(&priv->lock); - /* analog side (tuner-core) uses i2c_adap->algo_data. - * digital side is not guaranteed to have algo_data defined. - * - * digital side will always have fe->dvb defined. - * analog side (tuner-core) doesn't (yet) define fe->dvb. - */ - priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ? - fe->dvb->priv : cfg->i2c_adap->algo_data; - fe->tuner_priv = priv; break; case 2: diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h index 2c5b6282b56..19de7928a74 100644 --- a/drivers/media/common/tuners/tuner-xc2028.h +++ b/drivers/media/common/tuners/tuner-xc2028.h @@ -24,24 +24,28 @@ #define XC3028_FE_ZARLINK456 4560 #define XC3028_FE_CHINA 5200 +enum firmware_type { + XC2028_AUTO = 0, /* By default, auto-detects */ + XC2028_D2633, + XC2028_D2620, +}; + struct xc2028_ctrl { char *fname; int max_len; unsigned int scode_table; unsigned int mts :1; - unsigned int d2633 :1; unsigned int input1:1; unsigned int vhfbw7:1; unsigned int uhfbw8:1; unsigned int demod; + enum firmware_type type:2; }; struct xc2028_config { struct i2c_adapter *i2c_adap; u8 i2c_addr; - void *video_dev; struct xc2028_ctrl *ctrl; - int (*callback) (void *dev, int command, int arg); }; /* xc2028 commands for callback */ diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index dcddfa803a7..e12d13e0cbe 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -30,7 +30,7 @@ #include "dvb_frontend.h" #include "xc5000.h" -#include "xc5000_priv.h" +#include "tuner-i2c.h" static int debug; module_param(debug, int, 0644); @@ -40,12 +40,26 @@ static int xc5000_load_fw_on_attach; module_param_named(init_fw, xc5000_load_fw_on_attach, int, 0644); MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization."); -#define dprintk(level,fmt, arg...) if (debug >= level) \ +static DEFINE_MUTEX(xc5000_list_mutex); +static LIST_HEAD(hybrid_tuner_instance_list); + +#define dprintk(level, fmt, arg...) if (debug >= level) \ printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" #define XC5000_DEFAULT_FIRMWARE_SIZE 12332 +struct xc5000_priv { + struct tuner_i2c_props i2c_props; + struct list_head hybrid_tuner_instance_list; + + u32 if_khz; + u32 freq_hz; + u32 bandwidth; + u8 video_standard; + u8 rf_mode; +}; + /* Misc Defines */ #define MAX_TV_STANDARD 23 #define XC_MAX_I2C_WRITE_LENGTH 64 @@ -124,11 +138,11 @@ MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization."); immediately the length of the following transaction. */ -typedef struct { +struct XC_TV_STANDARD { char *Name; u16 AudioMode; u16 VideoMode; -} XC_TV_STANDARD; +}; /* Tuner standards */ #define MN_NTSC_PAL_BTSC 0 @@ -155,7 +169,7 @@ typedef struct { #define FM_Radio_INPUT2 21 #define FM_Radio_INPUT1 22 -static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { +static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, {"M/N-NTSC/PAL-A2", 0x0600, 0x8020}, {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020}, @@ -169,7 +183,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"D/K-PAL-NICAM", 0x0E80, 0x8009}, {"D/K-PAL-MONO", 0x1478, 0x8009}, {"D/K-SECAM-A2 DK1", 0x1200, 0x8009}, - {"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009}, + {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009}, {"D/K-SECAM-A2 MONO", 0x1478, 0x8009}, {"L-SECAM-NICAM", 0x8E82, 0x0009}, {"L'-SECAM-NICAM", 0x8E82, 0x4009}, @@ -216,9 +230,12 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __func__); - if (priv->cfg->tuner_callback) { - ret = priv->cfg->tuner_callback(priv->devptr, - XC5000_TUNER_RESET, 0); + if (fe->callback) { + ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : + priv->i2c_props.adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, + XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); } else @@ -290,9 +307,10 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) unsigned int len, pos, index; u8 buf[XC_MAX_I2C_WRITE_LENGTH]; - index=0; - while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) { - len = i2c_sequence[index]* 256 + i2c_sequence[index+1]; + index = 0; + while ((i2c_sequence[index] != 0xFF) || + (i2c_sequence[index + 1] != 0xFF)) { + len = i2c_sequence[index] * 256 + i2c_sequence[index+1]; if (len == 0x0000) { /* RESET command */ result = xc_reset(fe); @@ -312,15 +330,17 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) buf[1] = i2c_sequence[index + 1]; pos = 2; while (pos < len) { - if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) { - nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH; - } else { + if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) + nbytes_to_send = + XC_MAX_I2C_WRITE_LENGTH; + else nbytes_to_send = (len - pos + 2); + for (i = 2; i < nbytes_to_send; i++) { + buf[i] = i2c_sequence[index + pos + + i - 2]; } - for (i=2; i<nbytes_to_send; i++) { - buf[i] = i2c_sequence[index + pos + i - 2]; - } - result = xc_send_i2c_data(priv, buf, nbytes_to_send); + result = xc_send_i2c_data(priv, buf, + nbytes_to_send); if (result != XC_RESULT_SUCCESS) return result; @@ -369,8 +389,7 @@ static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode, rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); - if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) - { + if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) { rf_mode = XC_RF_MODE_CABLE; printk(KERN_ERR "%s(), Invalid mode, defaulting to CABLE", @@ -509,13 +528,13 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) u8 buf[2] = { reg >> 8, reg & 0xff }; u8 bval[2] = { 0, 0 }; struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, + { .addr = priv->i2c_props.addr, .flags = 0, .buf = &buf[0], .len = 2 }, - { .addr = priv->cfg->i2c_address, + { .addr = priv->i2c_props.addr, .flags = I2C_M_RD, .buf = &bval[0], .len = 2 }, }; - if (i2c_transfer(priv->i2c, msg, 2) != 2) { + if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) { printk(KERN_WARNING "xc5000: I2C read failed\n"); return -EREMOTEIO; } @@ -526,10 +545,10 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) { - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = 0, .buf = buf, .len = len }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", (int)len); return -EREMOTEIO; @@ -539,17 +558,17 @@ static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len) { - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = I2C_M_RD, .buf = buf, .len = len }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len); + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { + printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", (int)len); return -EREMOTEIO; } return 0; } -static int xc5000_fwupload(struct dvb_frontend* fe) +static int xc5000_fwupload(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; const struct firmware *fw; @@ -559,7 +578,8 @@ static int xc5000_fwupload(struct dvb_frontend* fe) printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", XC5000_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev); + ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, + &priv->i2c_props.adap->dev); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); ret = XC_RESULT_RESET_FAILURE; @@ -575,7 +595,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe) ret = XC_RESULT_RESET_FAILURE; } else { printk(KERN_INFO "xc5000: firmware upload\n"); - ret = xc_load_i2c_sequence(fe, fw->data ); + ret = xc_load_i2c_sequence(fe, fw->data); } out: @@ -634,7 +654,7 @@ static int xc5000_set_params(struct dvb_frontend *fe, dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); - switch(params->u.vsb.modulation) { + switch (params->u.vsb.modulation) { case VSB_8: case VSB_16: dprintk(1, "%s() VSB modulation\n", __func__); @@ -675,10 +695,10 @@ static int xc5000_set_params(struct dvb_frontend *fe, return -EREMOTEIO; } - ret = xc_set_IF_frequency(priv, priv->cfg->if_khz); + ret = xc_set_IF_frequency(priv, priv->if_khz); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", - priv->cfg->if_khz); + priv->if_khz); return -EIO; } @@ -731,42 +751,42 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, /* FIX ME: Some video standards may have several possible audio standards. We simply default to one of them here. */ - if(params->std & V4L2_STD_MN) { + if (params->std & V4L2_STD_MN) { /* default to BTSC audio standard */ priv->video_standard = MN_NTSC_PAL_BTSC; goto tune_channel; } - if(params->std & V4L2_STD_PAL_BG) { + if (params->std & V4L2_STD_PAL_BG) { /* default to NICAM audio standard */ priv->video_standard = BG_PAL_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_PAL_I) { + if (params->std & V4L2_STD_PAL_I) { /* default to NICAM audio standard */ priv->video_standard = I_PAL_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_PAL_DK) { + if (params->std & V4L2_STD_PAL_DK) { /* default to NICAM audio standard */ priv->video_standard = DK_PAL_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_SECAM_DK) { + if (params->std & V4L2_STD_SECAM_DK) { /* default to A2 DK1 audio standard */ priv->video_standard = DK_SECAM_A2DK1; goto tune_channel; } - if(params->std & V4L2_STD_SECAM_L) { + if (params->std & V4L2_STD_SECAM_L) { priv->video_standard = L_SECAM_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_SECAM_LC) { + if (params->std & V4L2_STD_SECAM_LC) { priv->video_standard = LC_SECAM_NICAM; goto tune_channel; } @@ -774,7 +794,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, tune_channel: ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { - printk(KERN_ERR + printk(KERN_ERR "xc5000: xc_SetSignalSource(%d) failed\n", priv->rf_mode); return -EREMOTEIO; @@ -846,7 +866,7 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) * I2C transactions until calibration is complete. This way we * don't have to rely on clock stretching working. */ - xc_wait( 100 ); + xc_wait(100); /* Default to "CABLE" mode */ ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); @@ -868,15 +888,13 @@ static int xc5000_sleep(struct dvb_frontend *fe) */ ret = xc_shutdown(priv); - if(ret != XC_RESULT_SUCCESS) { + if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: %s() unable to shutdown tuner\n", __func__); return -EREMOTEIO; - } - else { + } else return XC_RESULT_SUCCESS; - } } static int xc5000_init(struct dvb_frontend *fe) @@ -897,9 +915,19 @@ static int xc5000_init(struct dvb_frontend *fe) static int xc5000_release(struct dvb_frontend *fe) { + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); - kfree(fe->tuner_priv); + + mutex_lock(&xc5000_list_mutex); + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&xc5000_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -924,31 +952,45 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = { struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg, void *devptr) + struct xc5000_config *cfg) { struct xc5000_priv *priv = NULL; + int instance; u16 id = 0; - dprintk(1, "%s()\n", __func__); + dprintk(1, "%s(%d-%04x)\n", __func__, + i2c ? i2c_adapter_id(i2c) : -1, + cfg ? cfg->i2c_address : -1); - priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; + mutex_lock(&xc5000_list_mutex); - priv->cfg = cfg; - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->i2c = i2c; - priv->devptr = devptr; + instance = hybrid_tuner_request_state(struct xc5000_priv, priv, + hybrid_tuner_instance_list, + i2c, cfg->i2c_address, "xc5000"); + switch (instance) { + case 0: + goto fail; + break; + case 1: + /* new tuner instance */ + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->if_khz = cfg->if_khz; + + fe->tuner_priv = priv; + break; + default: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ - if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) { - kfree(priv); - return NULL; - } + if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) + goto fail; - switch(id) { + switch (id) { case XC_PRODUCT_ID_FW_LOADED: printk(KERN_INFO "xc5000: Successfully identified at address 0x%02x\n", @@ -967,19 +1009,23 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, printk(KERN_ERR "xc5000: Device not found at addr 0x%02x (0x%x)\n", cfg->i2c_address, id); - kfree(priv); - return NULL; + goto fail; } + mutex_unlock(&xc5000_list_mutex); + memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops, sizeof(struct dvb_tuner_ops)); - fe->tuner_priv = priv; - if (xc5000_load_fw_on_attach) xc5000_init(fe); return fe; +fail: + mutex_unlock(&xc5000_list_mutex); + + xc5000_release(fe); + return NULL; } EXPORT_SYMBOL(xc5000_attach); diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index 5389f740945..f4c146698a0 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -30,8 +30,6 @@ struct i2c_adapter; struct xc5000_config { u8 i2c_address; u32 if_khz; - - int (*tuner_callback) (void *priv, int command, int arg); }; /* xc5000 callback command */ @@ -47,19 +45,17 @@ struct xc5000_config { #if defined(CONFIG_MEDIA_TUNER_XC5000) || \ (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE)) -extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, +extern struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg, - void *devptr); + struct xc5000_config *cfg); #else -static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, +static inline struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg, - void *devptr) + struct xc5000_config *cfg) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_MEDIA_TUNER_XC5000 +#endif -#endif // __XC5000_H__ +#endif diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h deleted file mode 100644 index b2a0074c99c..00000000000 --- a/drivers/media/common/tuners/xc5000_priv.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" - * - * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef XC5000_PRIV_H -#define XC5000_PRIV_H - -struct xc5000_priv { - struct xc5000_config *cfg; - struct i2c_adapter *i2c; - - u32 freq_hz; - u32 bandwidth; - u8 video_standard; - u8 rf_mode; - - void *devptr; -}; - -#endif diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 8bc1445bd33..0bcd852576d 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -20,7 +20,6 @@ comment "Supported USB Adapters" source "drivers/media/dvb/dvb-usb/Kconfig" source "drivers/media/dvb/ttusb-budget/Kconfig" source "drivers/media/dvb/ttusb-dec/Kconfig" -source "drivers/media/dvb/cinergyT2/Kconfig" source "drivers/media/dvb/siano/Kconfig" comment "Supported FlexCopII (B2C2) Adapters" @@ -35,6 +34,10 @@ comment "Supported Pluto2 Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/pluto2/Kconfig" +comment "Supported SDMC DM1105 Adapters" + depends on DVB_CORE && PCI && I2C +source "drivers/media/dvb/dm1105/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index d6ba4d19520..f91e9eb15e5 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,4 +2,4 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ siano/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index a91ed28f03a..26f0011a507 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -10,7 +10,7 @@ int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size) { u8 *tcpu; - dma_addr_t tdma; + dma_addr_t tdma = 0; if (size % 2) { err("dma buffersize has to be even."); diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index 6afbfbbef0c..48762a2b9e4 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -702,7 +702,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) } if (card->fe == NULL) - printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("dvb-bt8xx: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", card->bt->dev->vendor, card->bt->dev->device, card->bt->dev->subsystem_vendor, diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig deleted file mode 100644 index c03513b2cca..00000000000 --- a/drivers/media/dvb/cinergyT2/Kconfig +++ /dev/null @@ -1,85 +0,0 @@ -config DVB_CINERGYT2 - tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver" - depends on DVB_CORE && USB && INPUT - help - Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers - - Say Y if you own such a device and want to use it. - - -config DVB_CINERGYT2_TUNING - bool "sophisticated fine-tuning for CinergyT2 cards" - depends on DVB_CINERGYT2 - help - Here you can fine-tune some parameters of the CinergyT2 driver. - - Normally you don't need to touch this, but in exotic setups you - may fine-tune your setup and adjust e.g. DMA buffer sizes for - a particular application. - - -config DVB_CINERGYT2_STREAM_URB_COUNT - int "Number of queued USB Request Blocks for Highspeed Stream Transfers" - depends on DVB_CINERGYT2_TUNING - default "32" - help - USB Request Blocks for Highspeed Stream transfers are scheduled in - a queue for the Host Controller. - - Usually the default value is a safe choice. - - You may increase this number if you are using this device in a - Server Environment with many high-traffic USB Highspeed devices - sharing the same USB bus. - - -config DVB_CINERGYT2_STREAM_BUF_SIZE - int "Size of URB Stream Buffers for Highspeed Transfers" - depends on DVB_CINERGYT2_TUNING - default "512" - help - Should be a multiple of native buffer size of 512 bytes. - Default value is a safe choice. - - You may increase this number if you are using this device in a - Server Environment with many high-traffic USB Highspeed devices - sharing the same USB bus. - - -config DVB_CINERGYT2_QUERY_INTERVAL - int "Status update interval [milliseconds]" - depends on DVB_CINERGYT2_TUNING - default "250" - help - This is the interval for status readouts from the demodulator. - You may try lower values if you need more responsive signal quality - measurements. - - Please keep in mind that these updates cause traffic on the tuner - control bus and thus may or may not affect reception sensitivity. - - The default value should be a safe choice for common applications. - - -config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE - bool "Register the onboard IR Remote Control Receiver as Input Device" - depends on DVB_CINERGYT2_TUNING - default y - help - Enable this option if you want to use the onboard Infrared Remote - Control Receiver as Linux-Input device. - - Right now only the keycode table for the default Remote Control - delivered with the device is supported, please see the driver - source code to find out how to add support for other controls. - - -config DVB_CINERGYT2_RC_QUERY_INTERVAL - int "Infrared Remote Controller update interval [milliseconds]" - depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE - default "50" - help - If you have a very fast-repeating remote control you can try lower - values, for normal consumer receivers the default value should be - a safe choice. - diff --git a/drivers/media/dvb/cinergyT2/Makefile b/drivers/media/dvb/cinergyT2/Makefile deleted file mode 100644 index d762d8cb0cf..00000000000 --- a/drivers/media/dvb/cinergyT2/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_CINERGYT2) += cinergyT2.o - -EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c deleted file mode 100644 index a824f3719f8..00000000000 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * TerraTec Cinergy T²/qanu USB2 DVB-T adapter. - * - * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and - * Holger Waechtler <holger@qanu.de> - * - * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/usb.h> -#include <linux/input.h> -#include <linux/dvb/frontend.h> -#include <linux/mutex.h> -#include <linux/mm.h> -#include <asm/io.h> - -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_net.h" - -#ifdef CONFIG_DVB_CINERGYT2_TUNING - #define STREAM_URB_COUNT (CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT) - #define STREAM_BUF_SIZE (CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE) - #define QUERY_INTERVAL (CONFIG_DVB_CINERGYT2_QUERY_INTERVAL) - #ifdef CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE - #define RC_QUERY_INTERVAL (CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL) - #define ENABLE_RC (1) - #endif -#else - #define STREAM_URB_COUNT (32) - #define STREAM_BUF_SIZE (512) /* bytes */ - #define ENABLE_RC (1) - #define RC_QUERY_INTERVAL (50) /* milliseconds */ - #define QUERY_INTERVAL (333) /* milliseconds */ -#endif - -#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" - -static int debug; -module_param_named(debug, debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define dprintk(level, args...) \ -do { \ - if ((debug & level)) { \ - printk("%s: %s(): ", KBUILD_MODNAME, \ - __func__); \ - printk(args); } \ -} while (0) - -enum cinergyt2_ep1_cmd { - CINERGYT2_EP1_PID_TABLE_RESET = 0x01, - CINERGYT2_EP1_PID_SETUP = 0x02, - CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, - CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, - CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, - CINERGYT2_EP1_START_SCAN = 0x06, - CINERGYT2_EP1_CONTINUE_SCAN = 0x07, - CINERGYT2_EP1_GET_RC_EVENTS = 0x08, - CINERGYT2_EP1_SLEEP_MODE = 0x09 -}; - -struct dvbt_set_parameters_msg { - uint8_t cmd; - __le32 freq; - uint8_t bandwidth; - __le16 tps; - uint8_t flags; -} __attribute__((packed)); - -struct dvbt_get_status_msg { - __le32 freq; - uint8_t bandwidth; - __le16 tps; - uint8_t flags; - __le16 gain; - uint8_t snr; - __le32 viterbi_error_rate; - __le32 rs_error_rate; - __le32 uncorrected_block_count; - uint8_t lock_bits; - uint8_t prev_lock_bits; -} __attribute__((packed)); - -static struct dvb_frontend_info cinergyt2_fe_info = { - .name = DRIVER_NAME, - .type = FE_OFDM, - .frequency_min = 174000000, - .frequency_max = 862000000, - .frequency_stepsize = 166667, - .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | - FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | - FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS -}; - -struct cinergyt2 { - struct dvb_demux demux; - struct usb_device *udev; - struct mutex sem; - struct mutex wq_sem; - struct dvb_adapter adapter; - struct dvb_device *fedev; - struct dmxdev dmxdev; - struct dvb_net dvbnet; - - int streaming; - int sleeping; - - struct dvbt_set_parameters_msg param; - struct dvbt_get_status_msg status; - struct delayed_work query_work; - - wait_queue_head_t poll_wq; - int pending_fe_events; - int disconnect_pending; - unsigned int uncorrected_block_count; - atomic_t inuse; - - void *streambuf; - dma_addr_t streambuf_dmahandle; - struct urb *stream_urb [STREAM_URB_COUNT]; - -#ifdef ENABLE_RC - struct input_dev *rc_input_dev; - char phys[64]; - struct delayed_work rc_query_work; - int rc_input_event; - __le32 rc_last_code; - unsigned long last_event_jiffies; -#endif -}; - -enum { - CINERGYT2_RC_EVENT_TYPE_NONE = 0x00, - CINERGYT2_RC_EVENT_TYPE_NEC = 0x01, - CINERGYT2_RC_EVENT_TYPE_RC5 = 0x02 -}; - -struct cinergyt2_rc_event { - char type; - __le32 value; -} __attribute__((packed)); - -static const uint32_t rc_keys[] = { - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfe01eb04, KEY_POWER, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfd02eb04, KEY_1, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfc03eb04, KEY_2, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfb04eb04, KEY_3, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfa05eb04, KEY_4, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf906eb04, KEY_5, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf807eb04, KEY_6, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf708eb04, KEY_7, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf609eb04, KEY_8, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf50aeb04, KEY_9, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf30ceb04, KEY_0, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf40beb04, KEY_VIDEO, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf20deb04, KEY_REFRESH, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf10eeb04, KEY_SELECT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf00feb04, KEY_EPG, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xef10eb04, KEY_UP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xeb14eb04, KEY_DOWN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xee11eb04, KEY_LEFT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xec13eb04, KEY_RIGHT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xed12eb04, KEY_OK, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xea15eb04, KEY_TEXT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe916eb04, KEY_INFO, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe817eb04, KEY_RED, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe718eb04, KEY_GREEN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe619eb04, KEY_YELLOW, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe51aeb04, KEY_BLUE, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe31ceb04, KEY_VOLUMEUP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe11eeb04, KEY_VOLUMEDOWN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe21deb04, KEY_MUTE, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe41beb04, KEY_CHANNELUP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe01feb04, KEY_CHANNELDOWN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xbf40eb04, KEY_PAUSE, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xb34ceb04, KEY_PLAY, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xa758eb04, KEY_RECORD, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xab54eb04, KEY_PREVIOUS, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xb748eb04, KEY_STOP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xa35ceb04, KEY_NEXT -}; - -static int cinergyt2_command (struct cinergyt2 *cinergyt2, - char *send_buf, int send_buf_len, - char *recv_buf, int recv_buf_len) -{ - int actual_len; - char dummy; - int ret; - - ret = usb_bulk_msg(cinergyt2->udev, usb_sndbulkpipe(cinergyt2->udev, 1), - send_buf, send_buf_len, &actual_len, 1000); - - if (ret) - dprintk(1, "usb_bulk_msg (send) failed, err %i\n", ret); - - if (!recv_buf) - recv_buf = &dummy; - - ret = usb_bulk_msg(cinergyt2->udev, usb_rcvbulkpipe(cinergyt2->udev, 1), - recv_buf, recv_buf_len, &actual_len, 1000); - - if (ret) - dprintk(1, "usb_bulk_msg (read) failed, err %i\n", ret); - - return ret ? ret : actual_len; -} - -static void cinergyt2_control_stream_transfer (struct cinergyt2 *cinergyt2, int enable) -{ - char buf [] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; - cinergyt2_command(cinergyt2, buf, sizeof(buf), NULL, 0); -} - -static void cinergyt2_sleep (struct cinergyt2 *cinergyt2, int sleep) -{ - char buf [] = { CINERGYT2_EP1_SLEEP_MODE, sleep ? 1 : 0 }; - cinergyt2_command(cinergyt2, buf, sizeof(buf), NULL, 0); - cinergyt2->sleeping = sleep; -} - -static void cinergyt2_stream_irq (struct urb *urb); - -static int cinergyt2_submit_stream_urb (struct cinergyt2 *cinergyt2, struct urb *urb) -{ - int err; - - usb_fill_bulk_urb(urb, - cinergyt2->udev, - usb_rcvbulkpipe(cinergyt2->udev, 0x2), - urb->transfer_buffer, - STREAM_BUF_SIZE, - cinergyt2_stream_irq, - cinergyt2); - - if ((err = usb_submit_urb(urb, GFP_ATOMIC))) - dprintk(1, "urb submission failed (err = %i)!\n", err); - - return err; -} - -static void cinergyt2_stream_irq (struct urb *urb) -{ - struct cinergyt2 *cinergyt2 = urb->context; - - if (urb->actual_length > 0) - dvb_dmx_swfilter(&cinergyt2->demux, - urb->transfer_buffer, urb->actual_length); - - if (cinergyt2->streaming) - cinergyt2_submit_stream_urb(cinergyt2, urb); -} - -static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) -{ - int i; - - for (i=0; i<STREAM_URB_COUNT; i++) - usb_free_urb(cinergyt2->stream_urb[i]); - - usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, - cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); -} - -static int cinergyt2_alloc_stream_urbs (struct cinergyt2 *cinergyt2) -{ - int i; - - cinergyt2->streambuf = usb_buffer_alloc(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, - GFP_KERNEL, &cinergyt2->streambuf_dmahandle); - if (!cinergyt2->streambuf) { - dprintk(1, "failed to alloc consistent stream memory area, bailing out!\n"); - return -ENOMEM; - } - - memset(cinergyt2->streambuf, 0, STREAM_URB_COUNT*STREAM_BUF_SIZE); - - for (i=0; i<STREAM_URB_COUNT; i++) { - struct urb *urb; - - if (!(urb = usb_alloc_urb(0, GFP_ATOMIC))) { - dprintk(1, "failed to alloc consistent stream urbs, bailing out!\n"); - cinergyt2_free_stream_urbs(cinergyt2); - return -ENOMEM; - } - - urb->transfer_buffer = cinergyt2->streambuf + i * STREAM_BUF_SIZE; - urb->transfer_buffer_length = STREAM_BUF_SIZE; - - cinergyt2->stream_urb[i] = urb; - } - - return 0; -} - -static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2) -{ - int i; - - cinergyt2_control_stream_transfer(cinergyt2, 0); - - for (i=0; i<STREAM_URB_COUNT; i++) - usb_kill_urb(cinergyt2->stream_urb[i]); -} - -static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2) -{ - int i, err; - - for (i=0; i<STREAM_URB_COUNT; i++) { - if ((err = cinergyt2_submit_stream_urb(cinergyt2, cinergyt2->stream_urb[i]))) { - cinergyt2_stop_stream_xfer(cinergyt2); - dprintk(1, "failed urb submission (%i: err = %i)!\n", i, err); - return err; - } - } - - cinergyt2_control_stream_transfer(cinergyt2, 1); - return 0; -} - -static int cinergyt2_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *demux = dvbdmxfeed->demux; - struct cinergyt2 *cinergyt2 = demux->priv; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - if (cinergyt2->streaming == 0) - cinergyt2_start_stream_xfer(cinergyt2); - - cinergyt2->streaming++; - mutex_unlock(&cinergyt2->sem); - return 0; -} - -static int cinergyt2_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *demux = dvbdmxfeed->demux; - struct cinergyt2 *cinergyt2 = demux->priv; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - if (--cinergyt2->streaming == 0) - cinergyt2_stop_stream_xfer(cinergyt2); - - mutex_unlock(&cinergyt2->sem); - return 0; -} - -/** - * convert linux-dvb frontend parameter set into TPS. - * See ETSI ETS-300744, section 4.6.2, table 9 for details. - * - * This function is probably reusable and may better get placed in a support - * library. - * - * We replace errornous fields by default TPS fields (the ones with value 0). - */ -static uint16_t compute_tps (struct dvb_frontend_parameters *p) -{ - struct dvb_ofdm_parameters *op = &p->u.ofdm; - uint16_t tps = 0; - - switch (op->code_rate_HP) { - case FEC_2_3: - tps |= (1 << 7); - break; - case FEC_3_4: - tps |= (2 << 7); - break; - case FEC_5_6: - tps |= (3 << 7); - break; - case FEC_7_8: - tps |= (4 << 7); - break; - case FEC_1_2: - case FEC_AUTO: - default: - /* tps |= (0 << 7) */; - } - - switch (op->code_rate_LP) { - case FEC_2_3: - tps |= (1 << 4); - break; - case FEC_3_4: - tps |= (2 << 4); - break; - case FEC_5_6: - tps |= (3 << 4); - break; - case FEC_7_8: - tps |= (4 << 4); - break; - case FEC_1_2: - case FEC_AUTO: - default: - /* tps |= (0 << 4) */; - } - - switch (op->constellation) { - case QAM_16: - tps |= (1 << 13); - break; - case QAM_64: - tps |= (2 << 13); - break; - case QPSK: - default: - /* tps |= (0 << 13) */; - } - - switch (op->transmission_mode) { - case TRANSMISSION_MODE_8K: - tps |= (1 << 0); - break; - case TRANSMISSION_MODE_2K: - default: - /* tps |= (0 << 0) */; - } - - switch (op->guard_interval) { - case GUARD_INTERVAL_1_16: - tps |= (1 << 2); - break; - case GUARD_INTERVAL_1_8: - tps |= (2 << 2); - break; - case GUARD_INTERVAL_1_4: - tps |= (3 << 2); - break; - case GUARD_INTERVAL_1_32: - default: - /* tps |= (0 << 2) */; - } - - switch (op->hierarchy_information) { - case HIERARCHY_1: - tps |= (1 << 10); - break; - case HIERARCHY_2: - tps |= (2 << 10); - break; - case HIERARCHY_4: - tps |= (3 << 10); - break; - case HIERARCHY_NONE: - default: - /* tps |= (0 << 10) */; - } - - return tps; -} - -static int cinergyt2_open (struct inode *inode, struct file *file) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - int err = -EAGAIN; - - if (cinergyt2->disconnect_pending) - goto out; - err = mutex_lock_interruptible(&cinergyt2->wq_sem); - if (err) - goto out; - - err = mutex_lock_interruptible(&cinergyt2->sem); - if (err) - goto out_unlock1; - - if ((err = dvb_generic_open(inode, file))) - goto out_unlock2; - - if ((file->f_flags & O_ACCMODE) != O_RDONLY) { - cinergyt2_sleep(cinergyt2, 0); - schedule_delayed_work(&cinergyt2->query_work, HZ/2); - } - - atomic_inc(&cinergyt2->inuse); - -out_unlock2: - mutex_unlock(&cinergyt2->sem); -out_unlock1: - mutex_unlock(&cinergyt2->wq_sem); -out: - return err; -} - -static void cinergyt2_unregister(struct cinergyt2 *cinergyt2) -{ - dvb_net_release(&cinergyt2->dvbnet); - dvb_dmxdev_release(&cinergyt2->dmxdev); - dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_device(cinergyt2->fedev); - dvb_unregister_adapter(&cinergyt2->adapter); - - cinergyt2_free_stream_urbs(cinergyt2); - kfree(cinergyt2); -} - -static int cinergyt2_release (struct inode *inode, struct file *file) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - - mutex_lock(&cinergyt2->wq_sem); - - if (!cinergyt2->disconnect_pending && (file->f_flags & O_ACCMODE) != O_RDONLY) { - cancel_rearming_delayed_work(&cinergyt2->query_work); - - mutex_lock(&cinergyt2->sem); - cinergyt2_sleep(cinergyt2, 1); - mutex_unlock(&cinergyt2->sem); - } - - mutex_unlock(&cinergyt2->wq_sem); - - if (atomic_dec_and_test(&cinergyt2->inuse) && cinergyt2->disconnect_pending) { - warn("delayed unregister in release"); - cinergyt2_unregister(cinergyt2); - } - - return dvb_generic_release(inode, file); -} - -static unsigned int cinergyt2_poll (struct file *file, struct poll_table_struct *wait) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - unsigned int mask = 0; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - poll_wait(file, &cinergyt2->poll_wq, wait); - - if (cinergyt2->pending_fe_events != 0) - mask |= (POLLIN | POLLRDNORM | POLLPRI); - - mutex_unlock(&cinergyt2->sem); - - return mask; -} - - -static int cinergyt2_ioctl (struct inode *inode, struct file *file, - unsigned cmd, unsigned long arg) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - struct dvbt_get_status_msg *stat = &cinergyt2->status; - fe_status_t status = 0; - - switch (cmd) { - case FE_GET_INFO: - return copy_to_user((void __user*) arg, &cinergyt2_fe_info, - sizeof(struct dvb_frontend_info)); - - case FE_READ_STATUS: - if (0xffff - le16_to_cpu(stat->gain) > 30) - status |= FE_HAS_SIGNAL; - if (stat->lock_bits & (1 << 6)) - status |= FE_HAS_LOCK; - if (stat->lock_bits & (1 << 5)) - status |= FE_HAS_SYNC; - if (stat->lock_bits & (1 << 4)) - status |= FE_HAS_CARRIER; - if (stat->lock_bits & (1 << 1)) - status |= FE_HAS_VITERBI; - - return copy_to_user((void __user*) arg, &status, sizeof(status)); - - case FE_READ_BER: - return put_user(le32_to_cpu(stat->viterbi_error_rate), - (__u32 __user *) arg); - - case FE_READ_SIGNAL_STRENGTH: - return put_user(0xffff - le16_to_cpu(stat->gain), - (__u16 __user *) arg); - - case FE_READ_SNR: - return put_user((stat->snr << 8) | stat->snr, - (__u16 __user *) arg); - - case FE_READ_UNCORRECTED_BLOCKS: - { - uint32_t unc_count; - - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - unc_count = cinergyt2->uncorrected_block_count; - cinergyt2->uncorrected_block_count = 0; - mutex_unlock(&cinergyt2->sem); - - /* UNC are already converted to host byte order... */ - return put_user(unc_count,(__u32 __user *) arg); - } - case FE_SET_FRONTEND: - { - struct dvbt_set_parameters_msg *param = &cinergyt2->param; - struct dvb_frontend_parameters p; - int err; - - if ((file->f_flags & O_ACCMODE) == O_RDONLY) - return -EPERM; - - if (copy_from_user(&p, (void __user*) arg, sizeof(p))) - return -EFAULT; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - param->tps = cpu_to_le16(compute_tps(&p)); - param->freq = cpu_to_le32(p.frequency / 1000); - param->bandwidth = 8 - p.u.ofdm.bandwidth - BANDWIDTH_8_MHZ; - - stat->lock_bits = 0; - cinergyt2->pending_fe_events++; - wake_up_interruptible(&cinergyt2->poll_wq); - - err = cinergyt2_command(cinergyt2, - (char *) param, sizeof(*param), - NULL, 0); - - mutex_unlock(&cinergyt2->sem); - - return (err < 0) ? err : 0; - } - - case FE_GET_FRONTEND: - /** - * trivial to implement (see struct dvbt_get_status_msg). - * equivalent to FE_READ ioctls, but needs - * TPS -> linux-dvb parameter set conversion. Feel free - * to implement this and send us a patch if you need this - * functionality. - */ - break; - - case FE_GET_EVENT: - { - /** - * for now we only fill the status field. the parameters - * are trivial to fill as soon FE_GET_FRONTEND is done. - */ - struct dvb_frontend_event __user *e = (void __user *) arg; - if (cinergyt2->pending_fe_events == 0) { - if (file->f_flags & O_NONBLOCK) - return -EWOULDBLOCK; - wait_event_interruptible(cinergyt2->poll_wq, - cinergyt2->pending_fe_events > 0); - } - cinergyt2->pending_fe_events = 0; - return cinergyt2_ioctl(inode, file, FE_READ_STATUS, - (unsigned long) &e->status); - } - - default: - ; - } - - return -EINVAL; -} - -static int cinergyt2_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - int ret = 0; - - lock_kernel(); - - if (vma->vm_flags & (VM_WRITE | VM_EXEC)) { - ret = -EPERM; - goto bailout; - } - - if (vma->vm_end > vma->vm_start + STREAM_URB_COUNT * STREAM_BUF_SIZE) { - ret = -EINVAL; - goto bailout; - } - - vma->vm_flags |= (VM_IO | VM_DONTCOPY); - vma->vm_file = file; - - ret = remap_pfn_range(vma, vma->vm_start, - virt_to_phys(cinergyt2->streambuf) >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot) ? -EAGAIN : 0; -bailout: - unlock_kernel(); - return ret; -} - -static struct file_operations cinergyt2_fops = { - .owner = THIS_MODULE, - .ioctl = cinergyt2_ioctl, - .poll = cinergyt2_poll, - .open = cinergyt2_open, - .release = cinergyt2_release, - .mmap = cinergyt2_mmap -}; - -static struct dvb_device cinergyt2_fe_template = { - .users = ~0, - .writers = 1, - .readers = (~0)-1, - .fops = &cinergyt2_fops -}; - -#ifdef ENABLE_RC - -static void cinergyt2_query_rc (struct work_struct *work) -{ - struct cinergyt2 *cinergyt2 = - container_of(work, struct cinergyt2, rc_query_work.work); - char buf[1] = { CINERGYT2_EP1_GET_RC_EVENTS }; - struct cinergyt2_rc_event rc_events[12]; - int n, len, i; - - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) - return; - - len = cinergyt2_command(cinergyt2, buf, sizeof(buf), - (char *) rc_events, sizeof(rc_events)); - if (len < 0) - goto out; - if (len == 0) { - if (time_after(jiffies, cinergyt2->last_event_jiffies + - msecs_to_jiffies(150))) { - /* stop key repeat */ - if (cinergyt2->rc_input_event != KEY_MAX) { - dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event); - input_report_key(cinergyt2->rc_input_dev, - cinergyt2->rc_input_event, 0); - input_sync(cinergyt2->rc_input_dev); - cinergyt2->rc_input_event = KEY_MAX; - } - cinergyt2->rc_last_code = cpu_to_le32(~0); - } - goto out; - } - cinergyt2->last_event_jiffies = jiffies; - - for (n = 0; n < (len / sizeof(rc_events[0])); n++) { - dprintk(1, "rc_events[%d].value = %x, type=%x\n", - n, le32_to_cpu(rc_events[n].value), rc_events[n].type); - - if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == cpu_to_le32(~0)) { - /* keyrepeat bit -> just repeat last rc_input_event */ - } else { - cinergyt2->rc_input_event = KEY_MAX; - for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) { - if (rc_keys[i + 0] == rc_events[n].type && - rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) { - cinergyt2->rc_input_event = rc_keys[i + 2]; - break; - } - } - } - - if (cinergyt2->rc_input_event != KEY_MAX) { - if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != cpu_to_le32(~0)) { - /* emit a key-up so the double event is recognized */ - dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); - input_report_key(cinergyt2->rc_input_dev, - cinergyt2->rc_input_event, 0); - } - dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event); - input_report_key(cinergyt2->rc_input_dev, - cinergyt2->rc_input_event, 1); - input_sync(cinergyt2->rc_input_dev); - cinergyt2->rc_last_code = rc_events[n].value; - } - } - -out: - schedule_delayed_work(&cinergyt2->rc_query_work, - msecs_to_jiffies(RC_QUERY_INTERVAL)); - - mutex_unlock(&cinergyt2->sem); -} - -static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) -{ - struct input_dev *input_dev; - int i; - int err; - - input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; - - usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); - strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); - cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = cpu_to_le32(~0); - INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc); - - input_dev->name = DRIVER_NAME " remote control"; - input_dev->phys = cinergyt2->phys; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) - set_bit(rc_keys[i + 2], input_dev->keybit); - input_dev->keycodesize = 0; - input_dev->keycodemax = 0; - input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); - input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); - input_dev->id.version = 1; - input_dev->dev.parent = &cinergyt2->udev->dev; - - err = input_register_device(input_dev); - if (err) { - input_free_device(input_dev); - return err; - } - - cinergyt2->rc_input_dev = input_dev; - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); - - return 0; -} - -static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) -{ - cancel_rearming_delayed_work(&cinergyt2->rc_query_work); - input_unregister_device(cinergyt2->rc_input_dev); -} - -static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) -{ - cancel_rearming_delayed_work(&cinergyt2->rc_query_work); -} - -static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) -{ - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); -} - -#else - -static inline int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) { return 0; } -static inline void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { } -static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { } -static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { } - -#endif /* ENABLE_RC */ - -static void cinergyt2_query (struct work_struct *work) -{ - struct cinergyt2 *cinergyt2 = - container_of(work, struct cinergyt2, query_work.work); - char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - struct dvbt_get_status_msg *s = &cinergyt2->status; - uint8_t lock_bits; - - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) - return; - - lock_bits = s->lock_bits; - - cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - - cinergyt2->uncorrected_block_count += - le32_to_cpu(s->uncorrected_block_count); - - if (lock_bits != s->lock_bits) { - wake_up_interruptible(&cinergyt2->poll_wq); - cinergyt2->pending_fe_events++; - } - - schedule_delayed_work(&cinergyt2->query_work, - msecs_to_jiffies(QUERY_INTERVAL)); - - mutex_unlock(&cinergyt2->sem); -} - -static int cinergyt2_probe (struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct cinergyt2 *cinergyt2; - int err; - - if (!(cinergyt2 = kzalloc (sizeof(struct cinergyt2), GFP_KERNEL))) { - dprintk(1, "out of memory?!?\n"); - return -ENOMEM; - } - - usb_set_intfdata (intf, (void *) cinergyt2); - - mutex_init(&cinergyt2->sem); - mutex_init(&cinergyt2->wq_sem); - init_waitqueue_head (&cinergyt2->poll_wq); - INIT_DELAYED_WORK(&cinergyt2->query_work, cinergyt2_query); - - cinergyt2->udev = interface_to_usbdev(intf); - cinergyt2->param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - - if (cinergyt2_alloc_stream_urbs (cinergyt2) < 0) { - dprintk(1, "unable to allocate stream urbs\n"); - kfree(cinergyt2); - return -ENOMEM; - } - - err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, - THIS_MODULE, &cinergyt2->udev->dev, - adapter_nr); - if (err < 0) { - kfree(cinergyt2); - return err; - } - - cinergyt2->demux.priv = cinergyt2; - cinergyt2->demux.filternum = 256; - cinergyt2->demux.feednum = 256; - cinergyt2->demux.start_feed = cinergyt2_start_feed; - cinergyt2->demux.stop_feed = cinergyt2_stop_feed; - cinergyt2->demux.dmx.capabilities = DMX_TS_FILTERING | - DMX_SECTION_FILTERING | - DMX_MEMORY_BASED_FILTERING; - - if ((err = dvb_dmx_init(&cinergyt2->demux)) < 0) { - dprintk(1, "dvb_dmx_init() failed (err = %d)\n", err); - goto bailout; - } - - cinergyt2->dmxdev.filternum = cinergyt2->demux.filternum; - cinergyt2->dmxdev.demux = &cinergyt2->demux.dmx; - cinergyt2->dmxdev.capabilities = 0; - - if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, &cinergyt2->adapter)) < 0) { - dprintk(1, "dvb_dmxdev_init() failed (err = %d)\n", err); - goto bailout; - } - - if (dvb_net_init(&cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx)) - dprintk(1, "dvb_net_init() failed!\n"); - - dvb_register_device(&cinergyt2->adapter, &cinergyt2->fedev, - &cinergyt2_fe_template, cinergyt2, - DVB_DEVICE_FRONTEND); - - err = cinergyt2_register_rc(cinergyt2); - if (err) - goto bailout; - - return 0; - -bailout: - dvb_net_release(&cinergyt2->dvbnet); - dvb_dmxdev_release(&cinergyt2->dmxdev); - dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_adapter(&cinergyt2->adapter); - cinergyt2_free_stream_urbs(cinergyt2); - kfree(cinergyt2); - return -ENOMEM; -} - -static void cinergyt2_disconnect (struct usb_interface *intf) -{ - struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - - cinergyt2_unregister_rc(cinergyt2); - cancel_rearming_delayed_work(&cinergyt2->query_work); - wake_up_interruptible(&cinergyt2->poll_wq); - - cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx); - cinergyt2->disconnect_pending = 1; - - if (!atomic_read(&cinergyt2->inuse)) - cinergyt2_unregister(cinergyt2); -} - -static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state) -{ - struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->wq_sem)) - return -ERESTARTSYS; - - cinergyt2_suspend_rc(cinergyt2); - cancel_rearming_delayed_work(&cinergyt2->query_work); - - mutex_lock(&cinergyt2->sem); - if (cinergyt2->streaming) - cinergyt2_stop_stream_xfer(cinergyt2); - cinergyt2_sleep(cinergyt2, 1); - mutex_unlock(&cinergyt2->sem); - - mutex_unlock(&cinergyt2->wq_sem); - - return 0; -} - -static int cinergyt2_resume (struct usb_interface *intf) -{ - struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - struct dvbt_set_parameters_msg *param = &cinergyt2->param; - int err = -EAGAIN; - - if (cinergyt2->disconnect_pending) - goto out; - err = mutex_lock_interruptible(&cinergyt2->wq_sem); - if (err) - goto out; - - err = mutex_lock_interruptible(&cinergyt2->sem); - if (err) - goto out_unlock1; - - if (!cinergyt2->sleeping) { - cinergyt2_sleep(cinergyt2, 0); - cinergyt2_command(cinergyt2, (char *) param, sizeof(*param), NULL, 0); - if (cinergyt2->streaming) - cinergyt2_start_stream_xfer(cinergyt2); - schedule_delayed_work(&cinergyt2->query_work, HZ/2); - } - - cinergyt2_resume_rc(cinergyt2); - - mutex_unlock(&cinergyt2->sem); -out_unlock1: - mutex_unlock(&cinergyt2->wq_sem); -out: - return err; -} - -static const struct usb_device_id cinergyt2_table [] __devinitdata = { - { USB_DEVICE(0x0ccd, 0x0038) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(usb, cinergyt2_table); - -static struct usb_driver cinergyt2_driver = { - .name = "cinergyT2", - .probe = cinergyt2_probe, - .disconnect = cinergyt2_disconnect, - .suspend = cinergyt2_suspend, - .resume = cinergyt2_resume, - .id_table = cinergyt2_table -}; - -static int __init cinergyt2_init (void) -{ - int err; - - if ((err = usb_register(&cinergyt2_driver)) < 0) - dprintk(1, "usb_register() failed! (err %i)\n", err); - - return err; -} - -static void __exit cinergyt2_exit (void) -{ - usb_deregister(&cinergyt2_driver); -} - -module_init (cinergyt2_init); -module_exit (cinergyt2_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Holger Waechtler, Daniel Mack"); diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig new file mode 100644 index 00000000000..1332301ef3a --- /dev/null +++ b/drivers/media/dvb/dm1105/Kconfig @@ -0,0 +1,18 @@ +config DVB_DM1105 + tristate "SDMC DM1105 based PCI cards" + depends on DVB_CORE && PCI && I2C + select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_STV0288 if !DVB_FE_CUSTOMISE + select DVB_STB6000 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_SI21XX if !DVB_FE_CUSTOMISE + help + Support for cards based on the SDMC DM1105 PCI chip like + DvbWorld 2002 + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. diff --git a/drivers/media/dvb/dm1105/Makefile b/drivers/media/dvb/dm1105/Makefile new file mode 100644 index 00000000000..8ac28b0546a --- /dev/null +++ b/drivers/media/dvb/dm1105/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_DM1105) += dm1105.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c new file mode 100644 index 00000000000..14e627ef646 --- /dev/null +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -0,0 +1,923 @@ +/* + * dm1105.c - driver for DVB cards based on SDMC DM1105 PCI chip + * + * Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/version.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/input.h> +#include <media/ir-common.h> + +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" +#include "dvb-pll.h" + +#include "stv0299.h" +#include "stv0288.h" +#include "stb6000.h" +#include "si21xx.h" +#include "cx24116.h" +#include "z0194a.h" + +/* ----------------------------------------------- */ +/* + * PCI ID's + */ +#ifndef PCI_VENDOR_ID_TRIGEM +#define PCI_VENDOR_ID_TRIGEM 0x109f +#endif +#ifndef PCI_DEVICE_ID_DM1105 +#define PCI_DEVICE_ID_DM1105 0x036f +#endif +#ifndef PCI_DEVICE_ID_DW2002 +#define PCI_DEVICE_ID_DW2002 0x2002 +#endif +#ifndef PCI_DEVICE_ID_DW2004 +#define PCI_DEVICE_ID_DW2004 0x2004 +#endif +/* ----------------------------------------------- */ +/* sdmc dm1105 registers */ + +/* TS Control */ +#define DM1105_TSCTR 0x00 +#define DM1105_DTALENTH 0x04 + +/* GPIO Interface */ +#define DM1105_GPIOVAL 0x08 +#define DM1105_GPIOCTR 0x0c + +/* PID serial number */ +#define DM1105_PIDN 0x10 + +/* Odd-even secret key select */ +#define DM1105_CWSEL 0x14 + +/* Host Command Interface */ +#define DM1105_HOST_CTR 0x18 +#define DM1105_HOST_AD 0x1c + +/* PCI Interface */ +#define DM1105_CR 0x30 +#define DM1105_RST 0x34 +#define DM1105_STADR 0x38 +#define DM1105_RLEN 0x3c +#define DM1105_WRP 0x40 +#define DM1105_INTCNT 0x44 +#define DM1105_INTMAK 0x48 +#define DM1105_INTSTS 0x4c + +/* CW Value */ +#define DM1105_ODD 0x50 +#define DM1105_EVEN 0x58 + +/* PID Value */ +#define DM1105_PID 0x60 + +/* IR Control */ +#define DM1105_IRCTR 0x64 +#define DM1105_IRMODE 0x68 +#define DM1105_SYSTEMCODE 0x6c +#define DM1105_IRCODE 0x70 + +/* Unknown Values */ +#define DM1105_ENCRYPT 0x74 +#define DM1105_VER 0x7c + +/* I2C Interface */ +#define DM1105_I2CCTR 0x80 +#define DM1105_I2CSTS 0x81 +#define DM1105_I2CDAT 0x82 +#define DM1105_I2C_RA 0x83 +/* ----------------------------------------------- */ +/* Interrupt Mask Bits */ + +#define INTMAK_TSIRQM 0x01 +#define INTMAK_HIRQM 0x04 +#define INTMAK_IRM 0x08 +#define INTMAK_ALLMASK (INTMAK_TSIRQM | \ + INTMAK_HIRQM | \ + INTMAK_IRM) +#define INTMAK_NONEMASK 0x00 + +/* Interrupt Status Bits */ +#define INTSTS_TSIRQ 0x01 +#define INTSTS_HIRQ 0x04 +#define INTSTS_IR 0x08 + +/* IR Control Bits */ +#define DM1105_IR_EN 0x01 +#define DM1105_SYS_CHK 0x02 +#define DM1105_REP_FLG 0x08 + +/* EEPROM addr */ +#define IIC_24C01_addr 0xa0 +/* Max board count */ +#define DM1105_MAX 0x04 + +#define DRIVER_NAME "dm1105" + +#define DM1105_DMA_PACKETS 47 +#define DM1105_DMA_PACKET_LENGTH (128*4) +#define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS) + +/* GPIO's for LNB power control */ +#define DM1105_LNB_MASK 0x00000000 +#define DM1105_LNB_13V 0x00010100 +#define DM1105_LNB_18V 0x00000100 + +static int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static u16 ir_codes_dm1105_nec[128] = { + [0x0a] = KEY_Q, /*power*/ + [0x0c] = KEY_M, /*mute*/ + [0x11] = KEY_1, + [0x12] = KEY_2, + [0x13] = KEY_3, + [0x14] = KEY_4, + [0x15] = KEY_5, + [0x16] = KEY_6, + [0x17] = KEY_7, + [0x18] = KEY_8, + [0x19] = KEY_9, + [0x10] = KEY_0, + [0x1c] = KEY_PAGEUP, /*ch+*/ + [0x0f] = KEY_PAGEDOWN, /*ch-*/ + [0x1a] = KEY_O, /*vol+*/ + [0x0e] = KEY_Z, /*vol-*/ + [0x04] = KEY_R, /*rec*/ + [0x09] = KEY_D, /*fav*/ + [0x08] = KEY_BACKSPACE, /*rewind*/ + [0x07] = KEY_A, /*fast*/ + [0x0b] = KEY_P, /*pause*/ + [0x02] = KEY_ESC, /*cancel*/ + [0x03] = KEY_G, /*tab*/ + [0x00] = KEY_UP, /*up*/ + [0x1f] = KEY_ENTER, /*ok*/ + [0x01] = KEY_DOWN, /*down*/ + [0x05] = KEY_C, /*cap*/ + [0x06] = KEY_S, /*stop*/ + [0x40] = KEY_F, /*full*/ + [0x1e] = KEY_W, /*tvmode*/ + [0x1b] = KEY_B, /*recall*/ +}; + +/* infrared remote control */ +struct infrared { + u16 key_map[128]; + struct input_dev *input_dev; + char input_phys[32]; + struct tasklet_struct ir_tasklet; + u32 ir_command; +}; + +struct dm1105dvb { + /* pci */ + struct pci_dev *pdev; + u8 __iomem *io_mem; + + /* ir */ + struct infrared ir; + + /* dvb */ + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + unsigned int full_ts_users; + + /* i2c */ + struct i2c_adapter i2c_adap; + + /* dma */ + dma_addr_t dma_addr; + unsigned char *ts_buf; + u32 wrp; + u32 buffer_size; + unsigned int PacketErrorCount; + unsigned int dmarst; + spinlock_t lock; + +}; + +#define dm_io_mem(reg) ((unsigned long)(&dm1105dvb->io_mem[reg])) + +static struct dm1105dvb *dm1105dvb_local; + +static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct dm1105dvb *dm1105dvb ; + + int addr, rc, i, j, k, len, byte, data; + u8 status; + + dm1105dvb = i2c_adap->algo_data; + for (i = 0; i < num; i++) { + outb(0x00, dm_io_mem(DM1105_I2CCTR)); + if (msgs[i].flags & I2C_M_RD) { + /* read bytes */ + addr = msgs[i].addr << 1; + addr |= 1; + outb(addr, dm_io_mem(DM1105_I2CDAT)); + for (byte = 0; byte < msgs[i].len; byte++) + outb(0, dm_io_mem(DM1105_I2CDAT + byte + 1)); + + outb(0x81 + msgs[i].len, dm_io_mem(DM1105_I2CCTR)); + for (j = 0; j < 55; j++) { + mdelay(10); + status = inb(dm_io_mem(DM1105_I2CSTS)); + if ((status & 0xc0) == 0x40) + break; + } + if (j >= 55) + return -1; + + for (byte = 0; byte < msgs[i].len; byte++) { + rc = inb(dm_io_mem(DM1105_I2CDAT + byte + 1)); + if (rc < 0) + goto err; + msgs[i].buf[byte] = rc; + } + } else { + if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) { + /* prepaired for cx24116 firmware */ + /* Write in small blocks */ + len = msgs[i].len - 1; + k = 1; + do { + outb(msgs[i].addr << 1, dm_io_mem(DM1105_I2CDAT)); + outb(0xf7, dm_io_mem(DM1105_I2CDAT + 1)); + for (byte = 0; byte < (len > 48 ? 48 : len); byte++) { + data = msgs[i].buf[k+byte]; + outb(data, dm_io_mem(DM1105_I2CDAT + byte + 2)); + } + outb(0x82 + (len > 48 ? 48 : len), dm_io_mem(DM1105_I2CCTR)); + for (j = 0; j < 25; j++) { + mdelay(10); + status = inb(dm_io_mem(DM1105_I2CSTS)); + if ((status & 0xc0) == 0x40) + break; + } + + if (j >= 25) + return -1; + + k += 48; + len -= 48; + } while (len > 0); + } else { + /* write bytes */ + outb(msgs[i].addr<<1, dm_io_mem(DM1105_I2CDAT)); + for (byte = 0; byte < msgs[i].len; byte++) { + data = msgs[i].buf[byte]; + outb(data, dm_io_mem(DM1105_I2CDAT + byte + 1)); + } + outb(0x81 + msgs[i].len, dm_io_mem(DM1105_I2CCTR)); + for (j = 0; j < 25; j++) { + mdelay(10); + status = inb(dm_io_mem(DM1105_I2CSTS)); + if ((status & 0xc0) == 0x40) + break; + } + + if (j >= 25) + return -1; + } + } + } + return num; + err: + return rc; +} + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dm1105_algo = { + .master_xfer = dm1105_i2c_xfer, + .functionality = functionality, +}; + +static inline struct dm1105dvb *feed_to_dm1105dvb(struct dvb_demux_feed *feed) +{ + return container_of(feed->demux, struct dm1105dvb, demux); +} + +static inline struct dm1105dvb *frontend_to_dm1105dvb(struct dvb_frontend *fe) +{ + return container_of(fe->dvb, struct dm1105dvb, dvb_adapter); +} + +static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe); + + if (voltage == SEC_VOLTAGE_18) { + outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR)); + outl(DM1105_LNB_18V, dm_io_mem(DM1105_GPIOVAL)); + } else { + /*LNB ON-13V by default!*/ + outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR)); + outl(DM1105_LNB_13V, dm_io_mem(DM1105_GPIOVAL)); + } + + return 0; +} + +static void dm1105dvb_set_dma_addr(struct dm1105dvb *dm1105dvb) +{ + outl(cpu_to_le32(dm1105dvb->dma_addr), dm_io_mem(DM1105_STADR)); +} + +static int __devinit dm1105dvb_dma_map(struct dm1105dvb *dm1105dvb) +{ + dm1105dvb->ts_buf = pci_alloc_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, &dm1105dvb->dma_addr); + + return pci_dma_mapping_error(dm1105dvb->pdev, dm1105dvb->dma_addr); +} + +static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb) +{ + pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr); +} + +static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) +{ + outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK)); + outb(1, dm_io_mem(DM1105_CR)); +} + +static void dm1105dvb_disable_irqs(struct dm1105dvb *dm1105dvb) +{ + outb(INTMAK_IRM, dm_io_mem(DM1105_INTMAK)); + outb(0, dm_io_mem(DM1105_CR)); +} + +static int dm1105dvb_start_feed(struct dvb_demux_feed *f) +{ + struct dm1105dvb *dm1105dvb = feed_to_dm1105dvb(f); + + if (dm1105dvb->full_ts_users++ == 0) + dm1105dvb_enable_irqs(dm1105dvb); + + return 0; +} + +static int dm1105dvb_stop_feed(struct dvb_demux_feed *f) +{ + struct dm1105dvb *dm1105dvb = feed_to_dm1105dvb(f); + + if (--dm1105dvb->full_ts_users == 0) + dm1105dvb_disable_irqs(dm1105dvb); + + return 0; +} + +/* ir tasklet */ +static void dm1105_emit_key(unsigned long parm) +{ + struct infrared *ir = (struct infrared *) parm; + u32 ircom = ir->ir_command; + u8 data; + u16 keycode; + + data = (ircom >> 8) & 0x7f; + + input_event(ir->input_dev, EV_MSC, MSC_RAW, (0x0000f8 << 16) | data); + input_event(ir->input_dev, EV_MSC, MSC_SCAN, data); + keycode = ir->key_map[data]; + + if (!keycode) + return; + + input_event(ir->input_dev, EV_KEY, keycode, 1); + input_sync(ir->input_dev); + input_event(ir->input_dev, EV_KEY, keycode, 0); + input_sync(ir->input_dev); + +} + +static irqreturn_t dm1105dvb_irq(int irq, void *dev_id) +{ + struct dm1105dvb *dm1105dvb = dev_id; + unsigned int piece; + unsigned int nbpackets; + u32 command; + u32 nextwrp; + u32 oldwrp; + + /* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */ + unsigned int intsts = inb(dm_io_mem(DM1105_INTSTS)); + outb(intsts, dm_io_mem(DM1105_INTSTS)); + + switch (intsts) { + case INTSTS_TSIRQ: + case (INTSTS_TSIRQ | INTSTS_IR): + nextwrp = inl(dm_io_mem(DM1105_WRP)) - + inl(dm_io_mem(DM1105_STADR)) ; + oldwrp = dm1105dvb->wrp; + spin_lock(&dm1105dvb->lock); + if (!((dm1105dvb->ts_buf[oldwrp] == 0x47) && + (dm1105dvb->ts_buf[oldwrp + 188] == 0x47) && + (dm1105dvb->ts_buf[oldwrp + 188 * 2] == 0x47))) { + dm1105dvb->PacketErrorCount++; + /* bad packet found */ + if ((dm1105dvb->PacketErrorCount >= 2) && + (dm1105dvb->dmarst == 0)) { + outb(1, dm_io_mem(DM1105_RST)); + dm1105dvb->wrp = 0; + dm1105dvb->PacketErrorCount = 0; + dm1105dvb->dmarst = 0; + spin_unlock(&dm1105dvb->lock); + return IRQ_HANDLED; + } + } + if (nextwrp < oldwrp) { + piece = dm1105dvb->buffer_size - oldwrp; + memcpy(dm1105dvb->ts_buf + dm1105dvb->buffer_size, dm1105dvb->ts_buf, nextwrp); + nbpackets = (piece + nextwrp)/188; + } else { + nbpackets = (nextwrp - oldwrp)/188; + } + dvb_dmx_swfilter_packets(&dm1105dvb->demux, &dm1105dvb->ts_buf[oldwrp], nbpackets); + dm1105dvb->wrp = nextwrp; + spin_unlock(&dm1105dvb->lock); + break; + case INTSTS_IR: + command = inl(dm_io_mem(DM1105_IRCODE)); + if (ir_debug) + printk("dm1105: received byte 0x%04x\n", command); + + dm1105dvb->ir.ir_command = command; + tasklet_schedule(&dm1105dvb->ir.ir_tasklet); + break; + } + return IRQ_HANDLED; + + +} + +/* register with input layer */ +static void input_register_keys(struct infrared *ir) +{ + int i; + + memset(ir->input_dev->keybit, 0, sizeof(ir->input_dev->keybit)); + + for (i = 0; i < ARRAY_SIZE(ir->key_map); i++) + set_bit(ir->key_map[i], ir->input_dev->keybit); + + ir->input_dev->keycode = ir->key_map; + ir->input_dev->keycodesize = sizeof(ir->key_map[0]); + ir->input_dev->keycodemax = ARRAY_SIZE(ir->key_map); +} + +int __devinit dm1105_ir_init(struct dm1105dvb *dm1105) +{ + struct input_dev *input_dev; + int err; + + dm1105dvb_local = dm1105; + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + dm1105->ir.input_dev = input_dev; + snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys), + "pci-%s/ir0", pci_name(dm1105->pdev)); + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->name = "DVB on-card IR receiver"; + + input_dev->phys = dm1105->ir.input_phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 2; + if (dm1105->pdev->subsystem_vendor) { + input_dev->id.vendor = dm1105->pdev->subsystem_vendor; + input_dev->id.product = dm1105->pdev->subsystem_device; + } else { + input_dev->id.vendor = dm1105->pdev->vendor; + input_dev->id.product = dm1105->pdev->device; + } + input_dev->dev.parent = &dm1105->pdev->dev; + /* initial keymap */ + memcpy(dm1105->ir.key_map, ir_codes_dm1105_nec, sizeof dm1105->ir.key_map); + input_register_keys(&dm1105->ir); + err = input_register_device(input_dev); + if (err) { + input_free_device(input_dev); + return err; + } + + tasklet_init(&dm1105->ir.ir_tasklet, dm1105_emit_key, (unsigned long) &dm1105->ir); + + return 0; +} + + +void __devexit dm1105_ir_exit(struct dm1105dvb *dm1105) +{ + tasklet_kill(&dm1105->ir.ir_tasklet); + input_unregister_device(dm1105->ir.input_dev); + +} + +static int __devinit dm1105dvb_hw_init(struct dm1105dvb *dm1105dvb) +{ + dm1105dvb_disable_irqs(dm1105dvb); + + outb(0, dm_io_mem(DM1105_HOST_CTR)); + + /*DATALEN 188,*/ + outb(188, dm_io_mem(DM1105_DTALENTH)); + /*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/ + outw(0xc10a, dm_io_mem(DM1105_TSCTR)); + + /* map DMA and set address */ + dm1105dvb_dma_map(dm1105dvb); + dm1105dvb_set_dma_addr(dm1105dvb); + /* big buffer */ + outl(5*DM1105_DMA_BYTES, dm_io_mem(DM1105_RLEN)); + outb(47, dm_io_mem(DM1105_INTCNT)); + + /* IR NEC mode enable */ + outb((DM1105_IR_EN | DM1105_SYS_CHK), dm_io_mem(DM1105_IRCTR)); + outb(0, dm_io_mem(DM1105_IRMODE)); + outw(0, dm_io_mem(DM1105_SYSTEMCODE)); + + return 0; +} + +static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb) +{ + dm1105dvb_disable_irqs(dm1105dvb); + + /* IR disable */ + outb(0, dm_io_mem(DM1105_IRCTR)); + outb(INTMAK_NONEMASK, dm_io_mem(DM1105_INTMAK)); + + dm1105dvb_dma_unmap(dm1105dvb); +} + +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + +static struct stv0288_config earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, +}; + +static struct si21xx_config serit_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + +}; + +static struct cx24116_config serit_sp2633_config = { + .demod_address = 0x55, +}; + +static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) +{ + int ret; + + switch (dm1105dvb->pdev->subsystem_device) { + case PCI_DEVICE_ID_DW2002: + dm1105dvb->fe = dvb_attach( + stv0299_attach, &sharp_z0194a_config, + &dm1105dvb->i2c_adap); + + if (dm1105dvb->fe) { + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60, + &dm1105dvb->i2c_adap, DVB_PLL_OPERA1); + } + + if (!dm1105dvb->fe) { + dm1105dvb->fe = dvb_attach( + stv0288_attach, &earda_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) { + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61, + &dm1105dvb->i2c_adap); + } + } + + if (!dm1105dvb->fe) { + dm1105dvb->fe = dvb_attach( + si21xx_attach, &serit_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + } + break; + case PCI_DEVICE_ID_DW2004: + dm1105dvb->fe = dvb_attach( + cx24116_attach, &serit_sp2633_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) + dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; + break; + } + + if (!dm1105dvb->fe) { + dev_err(&dm1105dvb->pdev->dev, "could not attach frontend\n"); + return -ENODEV; + } + + ret = dvb_register_frontend(&dm1105dvb->dvb_adapter, dm1105dvb->fe); + if (ret < 0) { + if (dm1105dvb->fe->ops.release) + dm1105dvb->fe->ops.release(dm1105dvb->fe); + dm1105dvb->fe = NULL; + return ret; + } + + return 0; +} + +static void __devinit dm1105dvb_read_mac(struct dm1105dvb *dm1105dvb, u8 *mac) +{ + static u8 command[1] = { 0x28 }; + + struct i2c_msg msg[] = { + { .addr = IIC_24C01_addr >> 1, .flags = 0, + .buf = command, .len = 1 }, + { .addr = IIC_24C01_addr >> 1, .flags = I2C_M_RD, + .buf = mac, .len = 6 }, + }; + + dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2); + dev_info(&dm1105dvb->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); +} + +static int __devinit dm1105_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dm1105dvb *dm1105dvb; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret = -ENOMEM; + + dm1105dvb = kzalloc(sizeof(struct dm1105dvb), GFP_KERNEL); + if (!dm1105dvb) + goto out; + + dm1105dvb->pdev = pdev; + dm1105dvb->buffer_size = 5 * DM1105_DMA_BYTES; + dm1105dvb->PacketErrorCount = 0; + dm1105dvb->dmarst = 0; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_kfree; + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + dm1105dvb->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!dm1105dvb->io_mem) { + ret = -EIO; + goto err_pci_release_regions; + } + + spin_lock_init(&dm1105dvb->lock); + pci_set_drvdata(pdev, dm1105dvb); + + ret = request_irq(pdev->irq, dm1105dvb_irq, IRQF_SHARED, DRIVER_NAME, dm1105dvb); + if (ret < 0) + goto err_pci_iounmap; + + ret = dm1105dvb_hw_init(dm1105dvb); + if (ret < 0) + goto err_free_irq; + + /* i2c */ + i2c_set_adapdata(&dm1105dvb->i2c_adap, dm1105dvb); + strcpy(dm1105dvb->i2c_adap.name, DRIVER_NAME); + dm1105dvb->i2c_adap.owner = THIS_MODULE; + dm1105dvb->i2c_adap.class = I2C_CLASS_TV_DIGITAL; + dm1105dvb->i2c_adap.dev.parent = &pdev->dev; + dm1105dvb->i2c_adap.algo = &dm1105_algo; + dm1105dvb->i2c_adap.algo_data = dm1105dvb; + ret = i2c_add_adapter(&dm1105dvb->i2c_adap); + + if (ret < 0) + goto err_dm1105dvb_hw_exit; + + /* dvb */ + ret = dvb_register_adapter(&dm1105dvb->dvb_adapter, DRIVER_NAME, + THIS_MODULE, &pdev->dev, adapter_nr); + if (ret < 0) + goto err_i2c_del_adapter; + + dvb_adapter = &dm1105dvb->dvb_adapter; + + dm1105dvb_read_mac(dm1105dvb, dvb_adapter->proposed_mac); + + dvbdemux = &dm1105dvb->demux; + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = dm1105dvb_start_feed; + dvbdemux->stop_feed = dm1105dvb_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + dm1105dvb->dmxdev.filternum = 256; + dm1105dvb->dmxdev.demux = dmx; + dm1105dvb->dmxdev.capabilities = 0; + + ret = dvb_dmxdev_init(&dm1105dvb->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + dm1105dvb->hw_frontend.source = DMX_FRONTEND_0; + + ret = dmx->add_frontend(dmx, &dm1105dvb->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + dm1105dvb->mem_frontend.source = DMX_MEMORY_FE; + + ret = dmx->add_frontend(dmx, &dm1105dvb->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &dm1105dvb->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = frontend_init(dm1105dvb); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &dm1105dvb->dvbnet, dmx); + dm1105_ir_init(dm1105dvb); +out: + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &dm1105dvb->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &dm1105dvb->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&dm1105dvb->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_i2c_del_adapter: + i2c_del_adapter(&dm1105dvb->i2c_adap); +err_dm1105dvb_hw_exit: + dm1105dvb_hw_exit(dm1105dvb); +err_free_irq: + free_irq(pdev->irq, dm1105dvb); +err_pci_iounmap: + pci_iounmap(pdev, dm1105dvb->io_mem); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(dm1105dvb); + goto out; +} + +static void __devexit dm1105_remove(struct pci_dev *pdev) +{ + struct dm1105dvb *dm1105dvb = pci_get_drvdata(pdev); + struct dvb_adapter *dvb_adapter = &dm1105dvb->dvb_adapter; + struct dvb_demux *dvbdemux = &dm1105dvb->demux; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dm1105_ir_exit(dm1105dvb); + dmx->close(dmx); + dvb_net_release(&dm1105dvb->dvbnet); + if (dm1105dvb->fe) + dvb_unregister_frontend(dm1105dvb->fe); + + dmx->disconnect_frontend(dmx); + dmx->remove_frontend(dmx, &dm1105dvb->mem_frontend); + dmx->remove_frontend(dmx, &dm1105dvb->hw_frontend); + dvb_dmxdev_release(&dm1105dvb->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_adapter(dvb_adapter); + if (&dm1105dvb->i2c_adap) + i2c_del_adapter(&dm1105dvb->i2c_adap); + + dm1105dvb_hw_exit(dm1105dvb); + synchronize_irq(pdev->irq); + free_irq(pdev->irq, dm1105dvb); + pci_iounmap(pdev, dm1105dvb->io_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(dm1105dvb); +} + +static struct pci_device_id dm1105_id_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_TRIGEM, + .device = PCI_DEVICE_ID_DM1105, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_DEVICE_ID_DW2002, + }, { + .vendor = PCI_VENDOR_ID_TRIGEM, + .device = PCI_DEVICE_ID_DM1105, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_DEVICE_ID_DW2004, + }, { + /* empty */ + }, +}; + +MODULE_DEVICE_TABLE(pci, dm1105_id_table); + +static struct pci_driver dm1105_driver = { + .name = DRIVER_NAME, + .id_table = dm1105_id_table, + .probe = dm1105_probe, + .remove = __devexit_p(dm1105_remove), +}; + +static int __init dm1105_init(void) +{ + return pci_register_driver(&dm1105_driver); +} + +static void __exit dm1105_exit(void) +{ + pci_unregister_driver(&dm1105_driver); +} + +module_init(dm1105_init); +module_exit(dm1105_exit); + +MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>"); +MODULE_DESCRIPTION("SDMC DM1105 DVB driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 3526e3ee948..5689d1f1d44 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -40,12 +40,14 @@ #include "dvb_frontend.h" #include "dvbdev.h" +#include <linux/dvb/version.h> static int dvb_frontend_debug; static int dvb_shutdown_timeout; static int dvb_force_auto_inversion; static int dvb_override_tune_delay; static int dvb_powerdown_on_sleep = 1; +static int dvb_mfe_wait_time = 5; module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); @@ -57,6 +59,8 @@ module_param(dvb_override_tune_delay, int, 0644); MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt"); module_param(dvb_powerdown_on_sleep, int, 0644); MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)"); +module_param(dvb_mfe_wait_time, int, 0644); +MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)"); #define dprintk if (dvb_frontend_debug) printk @@ -211,8 +215,9 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, static void dvb_frontend_init(struct dvb_frontend *fe) { - dprintk ("DVB: initialising frontend %i (%s)...\n", + dprintk ("DVB: initialising adapter %i frontend %i (%s)...\n", fe->dvb->num, + fe->id, fe->ops.info.name); if (fe->ops.init) @@ -685,7 +690,7 @@ static int dvb_frontend_start(struct dvb_frontend *fe) mb(); fe_thread = kthread_run(dvb_frontend_thread, fe, - "kdvb-fe-%i", fe->dvb->num); + "kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id); if (IS_ERR(fe_thread)) { ret = PTR_ERR(fe_thread); printk("dvb_frontend_start: failed to start kthread (%d)\n", ret); @@ -709,8 +714,8 @@ static void dvb_frontend_get_frequeny_limits(struct dvb_frontend *fe, *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); if (*freq_min == 0 || *freq_max == 0) - printk(KERN_WARNING "DVB: frontend %u frequency limits undefined - fix the driver\n", - fe->dvb->num); + printk(KERN_WARNING "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", + fe->dvb->num,fe->id); } static int dvb_frontend_check_parameters(struct dvb_frontend *fe, @@ -723,8 +728,8 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, dvb_frontend_get_frequeny_limits(fe, &freq_min, &freq_max); if ((freq_min && parms->frequency < freq_min) || (freq_max && parms->frequency > freq_max)) { - printk(KERN_WARNING "DVB: frontend %u frequency %u out of range (%u..%u)\n", - fe->dvb->num, parms->frequency, freq_min, freq_max); + printk(KERN_WARNING "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, parms->frequency, freq_min, freq_max); return -EINVAL; } @@ -734,8 +739,8 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, parms->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min) || (fe->ops.info.symbol_rate_max && parms->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max)) { - printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n", - fe->dvb->num, parms->u.qpsk.symbol_rate, + printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, parms->u.qpsk.symbol_rate, fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max); return -EINVAL; } @@ -745,8 +750,8 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, parms->u.qam.symbol_rate < fe->ops.info.symbol_rate_min) || (fe->ops.info.symbol_rate_max && parms->u.qam.symbol_rate > fe->ops.info.symbol_rate_max)) { - printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n", - fe->dvb->num, parms->u.qam.symbol_rate, + printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, parms->u.qam.symbol_rate, fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max); return -EINVAL; } @@ -755,6 +760,529 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, return 0; } +struct dtv_cmds_h dtv_cmds[] = { + [DTV_TUNE] = { + .name = "DTV_TUNE", + .cmd = DTV_TUNE, + .set = 1, + }, + [DTV_CLEAR] = { + .name = "DTV_CLEAR", + .cmd = DTV_CLEAR, + .set = 1, + }, + + /* Set */ + [DTV_FREQUENCY] = { + .name = "DTV_FREQUENCY", + .cmd = DTV_FREQUENCY, + .set = 1, + }, + [DTV_BANDWIDTH_HZ] = { + .name = "DTV_BANDWIDTH_HZ", + .cmd = DTV_BANDWIDTH_HZ, + .set = 1, + }, + [DTV_MODULATION] = { + .name = "DTV_MODULATION", + .cmd = DTV_MODULATION, + .set = 1, + }, + [DTV_INVERSION] = { + .name = "DTV_INVERSION", + .cmd = DTV_INVERSION, + .set = 1, + }, + [DTV_DISEQC_MASTER] = { + .name = "DTV_DISEQC_MASTER", + .cmd = DTV_DISEQC_MASTER, + .set = 1, + .buffer = 1, + }, + [DTV_SYMBOL_RATE] = { + .name = "DTV_SYMBOL_RATE", + .cmd = DTV_SYMBOL_RATE, + .set = 1, + }, + [DTV_INNER_FEC] = { + .name = "DTV_INNER_FEC", + .cmd = DTV_INNER_FEC, + .set = 1, + }, + [DTV_VOLTAGE] = { + .name = "DTV_VOLTAGE", + .cmd = DTV_VOLTAGE, + .set = 1, + }, + [DTV_TONE] = { + .name = "DTV_TONE", + .cmd = DTV_TONE, + .set = 1, + }, + [DTV_PILOT] = { + .name = "DTV_PILOT", + .cmd = DTV_PILOT, + .set = 1, + }, + [DTV_ROLLOFF] = { + .name = "DTV_ROLLOFF", + .cmd = DTV_ROLLOFF, + .set = 1, + }, + [DTV_DELIVERY_SYSTEM] = { + .name = "DTV_DELIVERY_SYSTEM", + .cmd = DTV_DELIVERY_SYSTEM, + .set = 1, + }, + [DTV_HIERARCHY] = { + .name = "DTV_HIERARCHY", + .cmd = DTV_HIERARCHY, + .set = 1, + }, + [DTV_CODE_RATE_HP] = { + .name = "DTV_CODE_RATE_HP", + .cmd = DTV_CODE_RATE_HP, + .set = 1, + }, + [DTV_CODE_RATE_LP] = { + .name = "DTV_CODE_RATE_LP", + .cmd = DTV_CODE_RATE_LP, + .set = 1, + }, + [DTV_GUARD_INTERVAL] = { + .name = "DTV_GUARD_INTERVAL", + .cmd = DTV_GUARD_INTERVAL, + .set = 1, + }, + [DTV_TRANSMISSION_MODE] = { + .name = "DTV_TRANSMISSION_MODE", + .cmd = DTV_TRANSMISSION_MODE, + .set = 1, + }, + /* Get */ + [DTV_DISEQC_SLAVE_REPLY] = { + .name = "DTV_DISEQC_SLAVE_REPLY", + .cmd = DTV_DISEQC_SLAVE_REPLY, + .set = 0, + .buffer = 1, + }, + [DTV_API_VERSION] = { + .name = "DTV_API_VERSION", + .cmd = DTV_API_VERSION, + .set = 0, + }, + [DTV_CODE_RATE_HP] = { + .name = "DTV_CODE_RATE_HP", + .cmd = DTV_CODE_RATE_HP, + .set = 0, + }, + [DTV_CODE_RATE_LP] = { + .name = "DTV_CODE_RATE_LP", + .cmd = DTV_CODE_RATE_LP, + .set = 0, + }, + [DTV_GUARD_INTERVAL] = { + .name = "DTV_GUARD_INTERVAL", + .cmd = DTV_GUARD_INTERVAL, + .set = 0, + }, + [DTV_TRANSMISSION_MODE] = { + .name = "DTV_TRANSMISSION_MODE", + .cmd = DTV_TRANSMISSION_MODE, + .set = 0, + }, + [DTV_HIERARCHY] = { + .name = "DTV_HIERARCHY", + .cmd = DTV_HIERARCHY, + .set = 0, + }, +}; + +void dtv_property_dump(struct dtv_property *tvp) +{ + int i; + + if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { + printk(KERN_WARNING "%s: tvp.cmd = 0x%08x undefined\n", + __func__, tvp->cmd); + return; + } + + dprintk("%s() tvp.cmd = 0x%08x (%s)\n" + ,__func__ + ,tvp->cmd + ,dtv_cmds[ tvp->cmd ].name); + + if(dtv_cmds[ tvp->cmd ].buffer) { + + dprintk("%s() tvp.u.buffer.len = 0x%02x\n" + ,__func__ + ,tvp->u.buffer.len); + + for(i = 0; i < tvp->u.buffer.len; i++) + dprintk("%s() tvp.u.buffer.data[0x%02x] = 0x%02x\n" + ,__func__ + ,i + ,tvp->u.buffer.data[i]); + + } else + dprintk("%s() tvp.u.data = 0x%08x\n", __func__, tvp->u.data); +} + +int is_legacy_delivery_system(fe_delivery_system_t s) +{ + if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) || + (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS)) + return 1; + + return 0; +} + +/* Synchronise the legacy tuning parameters into the cache, so that demodulator + * drivers can use a single set_frontend tuning function, regardless of whether + * it's being used for the legacy or new API, reducing code and complexity. + */ +void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + c->frequency = p->frequency; + c->inversion = p->inversion; + + switch (fe->ops.info.type) { + case FE_QPSK: + c->modulation = QPSK; /* implied for DVB-S in legacy API */ + c->rolloff = ROLLOFF_35;/* implied for DVB-S */ + c->symbol_rate = p->u.qpsk.symbol_rate; + c->fec_inner = p->u.qpsk.fec_inner; + c->delivery_system = SYS_DVBS; + break; + case FE_QAM: + c->symbol_rate = p->u.qam.symbol_rate; + c->fec_inner = p->u.qam.fec_inner; + c->modulation = p->u.qam.modulation; + c->delivery_system = SYS_DVBC_ANNEX_AC; + break; + case FE_OFDM: + if (p->u.ofdm.bandwidth == BANDWIDTH_6_MHZ) + c->bandwidth_hz = 6000000; + else if (p->u.ofdm.bandwidth == BANDWIDTH_7_MHZ) + c->bandwidth_hz = 7000000; + else if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) + c->bandwidth_hz = 8000000; + else + /* Including BANDWIDTH_AUTO */ + c->bandwidth_hz = 0; + c->code_rate_HP = p->u.ofdm.code_rate_HP; + c->code_rate_LP = p->u.ofdm.code_rate_LP; + c->modulation = p->u.ofdm.constellation; + c->transmission_mode = p->u.ofdm.transmission_mode; + c->guard_interval = p->u.ofdm.guard_interval; + c->hierarchy = p->u.ofdm.hierarchy_information; + c->delivery_system = SYS_DVBT; + break; + case FE_ATSC: + c->modulation = p->u.vsb.modulation; + if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) + c->delivery_system = SYS_ATSC; + else + c->delivery_system = SYS_DVBC_ANNEX_B; + break; + } +} + +/* Ensure the cached values are set correctly in the frontend + * legacy tuning structures, for the advanced tuning API. + */ +void dtv_property_legacy_params_sync(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_frontend_parameters *p = &fepriv->parameters; + + p->frequency = c->frequency; + p->inversion = c->inversion; + + switch (fe->ops.info.type) { + case FE_QPSK: + dprintk("%s() Preparing QPSK req\n", __func__); + p->u.qpsk.symbol_rate = c->symbol_rate; + p->u.qpsk.fec_inner = c->fec_inner; + c->delivery_system = SYS_DVBS; + break; + case FE_QAM: + dprintk("%s() Preparing QAM req\n", __func__); + p->u.qam.symbol_rate = c->symbol_rate; + p->u.qam.fec_inner = c->fec_inner; + p->u.qam.modulation = c->modulation; + c->delivery_system = SYS_DVBC_ANNEX_AC; + break; + case FE_OFDM: + dprintk("%s() Preparing OFDM req\n", __func__); + if (c->bandwidth_hz == 6000000) + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + else if (c->bandwidth_hz == 7000000) + p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; + else if (c->bandwidth_hz == 8000000) + p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; + else + p->u.ofdm.bandwidth = BANDWIDTH_AUTO; + p->u.ofdm.code_rate_HP = c->code_rate_HP; + p->u.ofdm.code_rate_LP = c->code_rate_LP; + p->u.ofdm.constellation = c->modulation; + p->u.ofdm.transmission_mode = c->transmission_mode; + p->u.ofdm.guard_interval = c->guard_interval; + p->u.ofdm.hierarchy_information = c->hierarchy; + c->delivery_system = SYS_DVBT; + break; + case FE_ATSC: + dprintk("%s() Preparing VSB req\n", __func__); + p->u.vsb.modulation = c->modulation; + if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) + c->delivery_system = SYS_ATSC; + else + c->delivery_system = SYS_DVBC_ANNEX_B; + break; + } +} + +/* Ensure the cached values are set correctly in the frontend + * legacy tuning structures, for the legacy tuning API. + */ +void dtv_property_adv_params_sync(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_frontend_parameters *p = &fepriv->parameters; + + p->frequency = c->frequency; + p->inversion = c->inversion; + + switch(c->modulation) { + case PSK_8: + case APSK_16: + case APSK_32: + case QPSK: + p->u.qpsk.symbol_rate = c->symbol_rate; + p->u.qpsk.fec_inner = c->fec_inner; + break; + default: + break; + } + + if(c->delivery_system == SYS_ISDBT) { + /* Fake out a generic DVB-T request so we pass validation in the ioctl */ + p->frequency = c->frequency; + p->inversion = INVERSION_AUTO; + p->u.ofdm.constellation = QAM_AUTO; + p->u.ofdm.code_rate_HP = FEC_AUTO; + p->u.ofdm.code_rate_LP = FEC_AUTO; + p->u.ofdm.bandwidth = BANDWIDTH_AUTO; + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; + p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; + p->u.ofdm.hierarchy_information = HIERARCHY_AUTO; + } +} + +void dtv_property_cache_submit(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* For legacy delivery systems we don't need the delivery_system to + * be specified, but we populate the older structures from the cache + * so we can call set_frontend on older drivers. + */ + if(is_legacy_delivery_system(c->delivery_system)) { + + dprintk("%s() legacy, modulation = %d\n", __func__, c->modulation); + dtv_property_legacy_params_sync(fe); + + } else { + dprintk("%s() adv, modulation = %d\n", __func__, c->modulation); + + /* For advanced delivery systems / modulation types ... + * we seed the lecacy dvb_frontend_parameters structure + * so that the sanity checking code later in the IOCTL processing + * can validate our basic frequency ranges, symbolrates, modulation + * etc. + */ + dtv_property_adv_params_sync(fe); + } +} + +static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, + unsigned int cmd, void *parg); +static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, + unsigned int cmd, void *parg); + +int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, + struct inode *inode, struct file *file) +{ + int r = 0; + + dtv_property_dump(tvp); + + /* Allow the frontend to validate incoming properties */ + if (fe->ops.get_property) + r = fe->ops.get_property(fe, tvp); + + if (r < 0) + return r; + + switch(tvp->cmd) { + case DTV_FREQUENCY: + tvp->u.data = fe->dtv_property_cache.frequency; + break; + case DTV_MODULATION: + tvp->u.data = fe->dtv_property_cache.modulation; + break; + case DTV_BANDWIDTH_HZ: + tvp->u.data = fe->dtv_property_cache.bandwidth_hz; + break; + case DTV_INVERSION: + tvp->u.data = fe->dtv_property_cache.inversion; + break; + case DTV_SYMBOL_RATE: + tvp->u.data = fe->dtv_property_cache.symbol_rate; + break; + case DTV_INNER_FEC: + tvp->u.data = fe->dtv_property_cache.fec_inner; + break; + case DTV_PILOT: + tvp->u.data = fe->dtv_property_cache.pilot; + break; + case DTV_ROLLOFF: + tvp->u.data = fe->dtv_property_cache.rolloff; + break; + case DTV_DELIVERY_SYSTEM: + tvp->u.data = fe->dtv_property_cache.delivery_system; + break; + case DTV_VOLTAGE: + tvp->u.data = fe->dtv_property_cache.voltage; + break; + case DTV_TONE: + tvp->u.data = fe->dtv_property_cache.sectone; + break; + case DTV_API_VERSION: + tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR; + break; + case DTV_CODE_RATE_HP: + tvp->u.data = fe->dtv_property_cache.code_rate_HP; + break; + case DTV_CODE_RATE_LP: + tvp->u.data = fe->dtv_property_cache.code_rate_LP; + break; + case DTV_GUARD_INTERVAL: + tvp->u.data = fe->dtv_property_cache.guard_interval; + break; + case DTV_TRANSMISSION_MODE: + tvp->u.data = fe->dtv_property_cache.transmission_mode; + break; + case DTV_HIERARCHY: + tvp->u.data = fe->dtv_property_cache.hierarchy; + break; + default: + r = -1; + } + + return r; +} + +int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, + struct inode *inode, struct file *file) +{ + int r = 0; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + dtv_property_dump(tvp); + + /* Allow the frontend to validate incoming properties */ + if (fe->ops.set_property) + r = fe->ops.set_property(fe, tvp); + + if (r < 0) + return r; + + switch(tvp->cmd) { + case DTV_CLEAR: + /* Reset a cache of data specific to the frontend here. This does + * not effect hardware. + */ + dprintk("%s() Flushing property cache\n", __func__); + memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties)); + fe->dtv_property_cache.state = tvp->cmd; + fe->dtv_property_cache.delivery_system = SYS_UNDEFINED; + break; + case DTV_TUNE: + /* interpret the cache of data, build either a traditional frontend + * tunerequest so we can pass validation in the FE_SET_FRONTEND + * ioctl. + */ + fe->dtv_property_cache.state = tvp->cmd; + dprintk("%s() Finalised property cache\n", __func__); + dtv_property_cache_submit(fe); + + r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, + &fepriv->parameters); + break; + case DTV_FREQUENCY: + fe->dtv_property_cache.frequency = tvp->u.data; + break; + case DTV_MODULATION: + fe->dtv_property_cache.modulation = tvp->u.data; + break; + case DTV_BANDWIDTH_HZ: + fe->dtv_property_cache.bandwidth_hz = tvp->u.data; + break; + case DTV_INVERSION: + fe->dtv_property_cache.inversion = tvp->u.data; + break; + case DTV_SYMBOL_RATE: + fe->dtv_property_cache.symbol_rate = tvp->u.data; + break; + case DTV_INNER_FEC: + fe->dtv_property_cache.fec_inner = tvp->u.data; + break; + case DTV_PILOT: + fe->dtv_property_cache.pilot = tvp->u.data; + break; + case DTV_ROLLOFF: + fe->dtv_property_cache.rolloff = tvp->u.data; + break; + case DTV_DELIVERY_SYSTEM: + fe->dtv_property_cache.delivery_system = tvp->u.data; + break; + case DTV_VOLTAGE: + fe->dtv_property_cache.voltage = tvp->u.data; + r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, + (void *)fe->dtv_property_cache.voltage); + break; + case DTV_TONE: + fe->dtv_property_cache.sectone = tvp->u.data; + r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_TONE, + (void *)fe->dtv_property_cache.sectone); + break; + case DTV_CODE_RATE_HP: + fe->dtv_property_cache.code_rate_HP = tvp->u.data; + break; + case DTV_CODE_RATE_LP: + fe->dtv_property_cache.code_rate_LP = tvp->u.data; + break; + case DTV_GUARD_INTERVAL: + fe->dtv_property_cache.guard_interval = tvp->u.data; + break; + case DTV_TRANSMISSION_MODE: + fe->dtv_property_cache.transmission_mode = tvp->u.data; + break; + case DTV_HIERARCHY: + fe->dtv_property_cache.hierarchy = tvp->u.data; + break; + default: + r = -1; + } + + return r; +} + static int dvb_frontend_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *parg) { @@ -776,6 +1304,112 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, if (down_interruptible (&fepriv->sem)) return -ERESTARTSYS; + if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY)) + err = dvb_frontend_ioctl_properties(inode, file, cmd, parg); + else { + fe->dtv_property_cache.state = DTV_UNDEFINED; + err = dvb_frontend_ioctl_legacy(inode, file, cmd, parg); + } + + up(&fepriv->sem); + return err; +} + +static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + int err = 0; + + struct dtv_properties *tvps = NULL; + struct dtv_property *tvp = NULL; + int i; + + dprintk("%s\n", __func__); + + if(cmd == FE_SET_PROPERTY) { + tvps = (struct dtv_properties __user *)parg; + + dprintk("%s() properties.num = %d\n", __func__, tvps->num); + dprintk("%s() properties.props = %p\n", __func__, tvps->props); + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) + return -EINVAL; + + tvp = (struct dtv_property *) kmalloc(tvps->num * + sizeof(struct dtv_property), GFP_KERNEL); + if (!tvp) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + for (i = 0; i < tvps->num; i++) { + (tvp + i)->result = dtv_property_process_set(fe, tvp + i, inode, file); + err |= (tvp + i)->result; + } + + if(fe->dtv_property_cache.state == DTV_TUNE) + dprintk("%s() Property cache is full, tuning\n", __func__); + + } else + if(cmd == FE_GET_PROPERTY) { + + tvps = (struct dtv_properties __user *)parg; + + dprintk("%s() properties.num = %d\n", __func__, tvps->num); + dprintk("%s() properties.props = %p\n", __func__, tvps->props); + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) + return -EINVAL; + + tvp = (struct dtv_property *) kmalloc(tvps->num * + sizeof(struct dtv_property), GFP_KERNEL); + if (!tvp) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + for (i = 0; i < tvps->num; i++) { + (tvp + i)->result = dtv_property_process_get(fe, tvp + i, inode, file); + err |= (tvp + i)->result; + } + + if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + } else + err = -EOPNOTSUPP; + +out: + kfree(tvp); + return err; +} + +static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + int err = -EOPNOTSUPP; + switch (cmd) { case FE_GET_INFO: { struct dvb_frontend_info* info = parg; @@ -942,13 +1576,21 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, case FE_SET_FRONTEND: { struct dvb_frontend_tune_settings fetunesettings; - if (dvb_frontend_check_parameters(fe, parg) < 0) { - err = -EINVAL; - break; - } + if(fe->dtv_property_cache.state == DTV_TUNE) { + if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) { + err = -EINVAL; + break; + } + } else { + if (dvb_frontend_check_parameters(fe, parg) < 0) { + err = -EINVAL; + break; + } - memcpy (&fepriv->parameters, parg, - sizeof (struct dvb_frontend_parameters)); + memcpy (&fepriv->parameters, parg, + sizeof (struct dvb_frontend_parameters)); + dtv_property_cache_sync(fe, &fepriv->parameters); + } memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); memcpy(&fetunesettings.parameters, parg, @@ -1027,10 +1669,10 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, break; }; - up (&fepriv->sem); return err; } + static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait) { struct dvb_device *dvbdev = file->private_data; @@ -1052,13 +1694,53 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_adapter *adapter = fe->dvb; int ret; dprintk ("%s\n", __func__); + if (adapter->mfe_shared) { + mutex_lock (&adapter->mfe_lock); + + if (adapter->mfe_dvbdev == NULL) + adapter->mfe_dvbdev = dvbdev; + + else if (adapter->mfe_dvbdev != dvbdev) { + struct dvb_device + *mfedev = adapter->mfe_dvbdev; + struct dvb_frontend + *mfe = mfedev->priv; + struct dvb_frontend_private + *mfepriv = mfe->frontend_priv; + int mferetry = (dvb_mfe_wait_time << 1); + + mutex_unlock (&adapter->mfe_lock); + while (mferetry-- && (mfedev->users != -1 || + mfepriv->thread != NULL)) { + if(msleep_interruptible(500)) { + if(signal_pending(current)) + return -EINTR; + } + } + + mutex_lock (&adapter->mfe_lock); + if(adapter->mfe_dvbdev != dvbdev) { + mfedev = adapter->mfe_dvbdev; + mfe = mfedev->priv; + mfepriv = mfe->frontend_priv; + if (mfedev->users != -1 || + mfepriv->thread != NULL) { + mutex_unlock (&adapter->mfe_lock); + return -EBUSY; + } + adapter->mfe_dvbdev = dvbdev; + } + } + } + if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) - return ret; + goto err0; } if ((ret = dvb_generic_open (inode, file)) < 0) @@ -1078,6 +1760,8 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) fepriv->events.eventr = fepriv->events.eventw = 0; } + if (adapter->mfe_shared) + mutex_unlock (&adapter->mfe_lock); return ret; err2: @@ -1085,6 +1769,9 @@ err2: err1: if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) fe->ops.ts_bus_ctrl(fe, 0); +err0: + if (adapter->mfe_shared) + mutex_unlock (&adapter->mfe_lock); return ret; } @@ -1154,8 +1841,9 @@ int dvb_register_frontend(struct dvb_adapter* dvb, fe->dvb = dvb; fepriv->inversion = INVERSION_OFF; - printk ("DVB: registering frontend %i (%s)...\n", + printk ("DVB: registering adapter %i frontend %i (%s)...\n", fe->dvb->num, + fe->id, fe->ops.info.name); dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index aa4133f0bd1..db4a63b0a32 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -169,6 +169,9 @@ struct dvb_frontend_ops { struct dvb_tuner_ops tuner_ops; struct analog_demod_ops analog_ops; + + int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp); + int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp); }; #define MAX_EVENT 8 @@ -182,6 +185,32 @@ struct dvb_fe_events { struct mutex mtx; }; +struct dtv_frontend_properties { + + /* Cache State */ + u32 state; + + u32 frequency; + fe_modulation_t modulation; + + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t sectone; + fe_spectral_inversion_t inversion; + fe_code_rate_t fec_inner; + fe_transmit_mode_t transmission_mode; + u32 bandwidth_hz; /* 0 = AUTO */ + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy; + u32 symbol_rate; + fe_code_rate_t code_rate_HP; + fe_code_rate_t code_rate_LP; + + fe_pilot_t pilot; + fe_rolloff_t rolloff; + + fe_delivery_system_t delivery_system; +}; + struct dvb_frontend { struct dvb_frontend_ops ops; struct dvb_adapter *dvb; @@ -190,6 +219,10 @@ struct dvb_frontend { void *frontend_priv; void *sec_priv; void *analog_demod_priv; + struct dtv_frontend_properties dtv_property_cache; +#define DVB_FRONTEND_COMPONENT_TUNER 0 + int (*callback)(void *adapter_priv, int component, int cmd, int arg); + int id; }; extern int dvb_register_frontend(struct dvb_adapter *dvb, diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index e7132770a3b..a113744a56c 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -233,7 +233,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, mutex_unlock(&dvbdev_register_lock); - clsdev = device_create_drvdata(dvb_class, adap->device, + clsdev = device_create(dvb_class, adap->device, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), NULL, "dvb%d.%s%d", adap->num, dnames[type], id); if (IS_ERR(clsdev)) { @@ -326,6 +326,9 @@ int dvb_register_adapter(struct dvb_adapter *adap, const char *name, adap->name = name; adap->module = module; adap->device = device; + adap->mfe_shared = 0; + adap->mfe_dvbdev = NULL; + mutex_init (&adap->mfe_lock); list_add_tail (&adap->list_head, &dvb_adapter_list); diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h index 89d12dc477a..574e336bac3 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb/dvb-core/dvbdev.h @@ -62,6 +62,10 @@ struct dvb_adapter { struct device *device; struct module *module; + + int mfe_shared; /* indicates mutually exclusive frontends */ + struct dvb_device *mfe_dvbdev; /* frontend device in use */ + struct mutex mfe_lock; /* access lock for thread creation */ }; diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index e84152b7576..3c13bcfa638 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -72,9 +72,11 @@ config DVB_USB_DIB0700 select DVB_DIB7000P select DVB_DIB7000M select DVB_DIB3000MC + select DVB_S5H1411 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select DVB_TUNER_DIB0070 help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The @@ -108,6 +110,8 @@ config DVB_USB_CXUSB select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select DVB_DIB7000P if !DVB_FE_CUSTOMISE + select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode @@ -245,12 +249,25 @@ config DVB_USB_AF9005_REMOTE Afatech AF9005 based receiver. config DVB_USB_DW2102 - tristate "DvbWorld 2102 DVB-S USB2.0 receiver" + tristate "DvbWorld DVB-S/S2 USB2.0 support" depends on DVB_USB - select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_STV0288 if !DVB_FE_CUSTOMISE + select DVB_STB6000 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_SI21XX if !DVB_FE_CUSTOMISE help - Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver. + Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers + and the TeVii S650. + +config DVB_USB_CINERGY_T2 + tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" + depends on DVB_USB + help + Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers + + Say Y if you own such a device and want to use it. config DVB_USB_ANYSEE tristate "Anysee DVB-T/C USB2.0 support" @@ -262,3 +279,22 @@ config DVB_USB_ANYSEE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. + +config DVB_USB_DTV5100 + tristate "AME DTV-5100 USB2.0 DVB-T support" + depends on DVB_USB + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + help + Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. + +config DVB_USB_AF9015 + tristate "Afatech AF9015 DVB-T USB2.0 support" + depends on DVB_USB && EXPERIMENTAL + select DVB_AF9013 + select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + help + Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index e206f1ea002..3122b7cc2c2 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -67,6 +67,16 @@ obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o dvb-usb-dw2102-objs = dw2102.o obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o +dvb-usb-dtv5100-objs = dtv5100.o +obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o + +dvb-usb-af9015-objs = af9015.o +obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o + +dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o +obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o + + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c index ff00c0e8f4a..7c596f92676 100644 --- a/drivers/media/dvb/dvb-usb/af9005-remote.c +++ b/drivers/media/dvb/dvb-usb/af9005-remote.c @@ -25,7 +25,7 @@ */ #include "af9005.h" /* debug */ -int dvb_usb_af9005_remote_debug; +static int dvb_usb_af9005_remote_debug; module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644); MODULE_PARM_DESC(debug, "enable (1) or disable (0) debug messages." diff --git a/drivers/media/dvb/dvb-usb/af9005-script.h b/drivers/media/dvb/dvb-usb/af9005-script.h index 6eeaae51b1c..4d69045426d 100644 --- a/drivers/media/dvb/dvb-usb/af9005-script.h +++ b/drivers/media/dvb/dvb-usb/af9005-script.h @@ -14,7 +14,7 @@ typedef struct { u8 val; } RegDesc; -RegDesc script[] = { +static RegDesc script[] = { {0xa180, 0x0, 0x8, 0xa}, {0xa181, 0x0, 0x8, 0xd7}, {0xa182, 0x0, 0x8, 0xa3}, diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index cfe71feefca..ca5a0a4d2a4 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -35,17 +35,17 @@ module_param_named(led, dvb_usb_af9005_led, bool, 0644); MODULE_PARM_DESC(led, "enable led (default: 1)."); /* eeprom dump */ -int dvb_usb_af9005_dump_eeprom = 0; +static int dvb_usb_af9005_dump_eeprom; module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); /* remote control decoder */ -int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event, - int *state); -void *rc_keys; -int *rc_keys_size; +static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, + u32 *event, int *state); +static void *rc_keys; +static int *rc_keys_size; u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; @@ -54,8 +54,8 @@ struct af9005_device_state { int led_state; }; -int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen, - u8 * rbuf, u16 rlen, int delay_ms) +static int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, + u8 *rbuf, u16 rlen, int delay_ms) { int actlen, ret = -ENOMEM; @@ -98,12 +98,7 @@ int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen, return ret; } -int af9005_usb_generic_write(struct dvb_usb_device *d, u8 * buf, u16 len) -{ - return af9005_usb_generic_rw(d, buf, len, NULL, 0, 0); -} - -int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, +static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, int readwrite, int type, u8 * values, int len) { struct af9005_device_state *st = d->priv; @@ -765,7 +760,7 @@ static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) return 0; } -int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) +static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) { int i, packets, ret, act_len; diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c new file mode 100644 index 00000000000..cb0829c038c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -0,0 +1,1474 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "af9015.h" +#include "af9013.h" +#include "mt2060.h" +#include "qt1010.h" +#include "tda18271.h" +#include "mxl5005s.h" +#if 0 +#include "mc44s80x.h" +#endif + +int dvb_usb_af9015_debug; +module_param_named(debug, dvb_usb_af9015_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +int dvb_usb_af9015_remote; +module_param_named(remote, dvb_usb_af9015_remote, int, 0644); +MODULE_PARM_DESC(remote, "select remote"); +int dvb_usb_af9015_dual_mode; +module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); +MODULE_PARM_DESC(dual_mode, "enable dual mode"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static DEFINE_MUTEX(af9015_usb_mutex); + +static struct af9015_config af9015_config; +static struct dvb_usb_device_properties af9015_properties[2]; +int af9015_properties_count = ARRAY_SIZE(af9015_properties); + +static struct af9013_config af9015_af9013_config[] = { + { + .demod_address = AF9015_I2C_DEMOD, + .output_mode = AF9013_OUTPUT_MODE_USB, + .api_version = { 0, 1, 9, 0 }, + .gpio[0] = AF9013_GPIO_HI, + .gpio[3] = AF9013_GPIO_TUNER_ON, + + }, { + .output_mode = AF9013_OUTPUT_MODE_SERIAL, + .api_version = { 0, 1, 9, 0 }, + .gpio[0] = AF9013_GPIO_TUNER_ON, + .gpio[1] = AF9013_GPIO_LO, + } +}; + +static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) +{ + int act_len, ret; + u8 buf[64]; + u8 write = 1; + u8 msg_len = 8; + static u8 seq; /* packet sequence number */ + + if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) + return -EAGAIN; + + buf[0] = req->cmd; + buf[1] = seq++; + buf[2] = req->i2c_addr; + buf[3] = req->addr >> 8; + buf[4] = req->addr & 0xff; + buf[5] = req->mbox; + buf[6] = req->addr_len; + buf[7] = req->data_len; + + switch (req->cmd) { + case GET_CONFIG: + case BOOT: + case READ_MEMORY: + case RECONNECT_USB: + case GET_IR_CODE: + write = 0; + break; + case READ_I2C: + write = 0; + buf[2] |= 0x01; /* set I2C direction */ + case WRITE_I2C: + buf[0] = READ_WRITE_I2C; + break; + case WRITE_MEMORY: + if (((req->addr & 0xff00) == 0xff00) || + ((req->addr & 0xae00) == 0xae00)) + buf[0] = WRITE_VIRTUAL_MEMORY; + case WRITE_VIRTUAL_MEMORY: + case COPY_FIRMWARE: + case DOWNLOAD_FIRMWARE: + break; + default: + err("unknown command:%d", req->cmd); + ret = -1; + goto error_unlock; + } + + /* write requested */ + if (write) { + memcpy(&buf[8], req->data, req->data_len); + msg_len += req->data_len; + } + deb_xfer(">>> "); + debug_dump(buf, msg_len, deb_xfer); + + /* send req */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, + &act_len, AF9015_USB_TIMEOUT); + if (ret) + err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); + else + if (act_len != msg_len) + ret = -1; /* all data is not send */ + if (ret) + goto error_unlock; + + /* no ack for those packets */ + if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) + goto exit_unlock; + + /* receive ack and data if read req */ + msg_len = 1 + 1 + req->data_len; /* seq + status + data len */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, + &act_len, AF9015_USB_TIMEOUT); + if (ret) { + err("recv bulk message failed:%d", ret); + ret = -1; + goto error_unlock; + } + + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + + /* remote controller query status is 1 if remote code is not received */ + if (req->cmd == GET_IR_CODE && buf[1] == 1) { + buf[1] = 0; /* clear command "error" status */ + memset(&buf[2], 0, req->data_len); + buf[3] = 1; /* no remote code received mark */ + } + + /* check status */ + if (buf[1]) { + err("command failed:%d", buf[1]); + ret = -1; + goto error_unlock; + } + + /* read request, copy returned data to return buf */ + if (!write) + memcpy(req->data, &buf[2], req->data_len); + +error_unlock: +exit_unlock: + mutex_unlock(&af9015_usb_mutex); + + return ret; +} + +static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) +{ + return af9015_rw_udev(d->udev, req); +} + +static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, + u8 len) +{ + struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) +{ + return af9015_write_regs(d, addr, &val, 1); +} + +static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) +{ + struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, 1, val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 val) +{ + struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; + + if (addr == af9015_af9013_config[0].demod_address || + addr == af9015_af9013_config[1].demod_address) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 *val) +{ + struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; + + if (addr == af9015_af9013_config[0].demod_address || + addr == af9015_af9013_config[1].demod_address) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0, i = 0; + u16 addr; + u8 mbox, addr_len; + struct req_t req; + +/* TODO: implement bus lock + +The bus lock is needed because there is two tuners both using same I2C-address. +Due to that the only way to select correct tuner is use demodulator I2C-gate. + +................................................ +. AF9015 includes integrated AF9013 demodulator. +. ____________ ____________ . ____________ +.| uC | | demod | . | tuner | +.|------------| |------------| . |------------| +.| AF9015 | | AF9013/5 | . | MXL5003 | +.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | +.| | | | addr 0x38 | . | addr 0xc6 | +.|____________| | |____________| . |____________| +.................|.............................. + | ____________ ____________ + | | demod | | tuner | + | |------------| |------------| + | | AF9013 | | MXL5003 | + +----I2C-------|-----/ -----|-------I2C-------| | + | addr 0x3a | | addr 0xc6 | + |____________| |____________| +*/ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (msg[i].addr == af9015_af9013_config[0].demod_address || + msg[i].addr == af9015_af9013_config[1].demod_address) { + addr = msg[i].buf[0] << 8; + addr += msg[i].buf[1]; + mbox = msg[i].buf[2]; + addr_len = 3; + } else { + addr = msg[i].buf[0]; + addr_len = 1; + mbox = 0; + } + + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + if (msg[i].addr == + af9015_af9013_config[0].demod_address) + req.cmd = READ_MEMORY; + else + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i+1].len; + req.data = &msg[i+1].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 2; + } else { + if (msg[i].addr == + af9015_af9013_config[0].demod_address) + req.cmd = WRITE_MEMORY; + else + req.cmd = WRITE_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len-addr_len; + req.data = &msg[i].buf[addr_len]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } + if (ret) + goto error; + + } + ret = i; + +error: + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 af9015_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9015_i2c_algo = { + .master_xfer = af9015_i2c_xfer, + .functionality = af9015_i2c_func, +}; + +static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +{ + int ret; + u8 val, mask = 0x01; + + ret = af9015_read_reg(d, addr, &val); + if (ret) + return ret; + + mask <<= bit; + if (op) { + /* set bit */ + val |= mask; + } else { + /* clear bit */ + mask ^= 0xff; + val &= mask; + } + + return af9015_write_reg(d, addr, val); +} + +static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 1); +} + +static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 0); +} + +static int af9015_init_endpoint(struct dvb_usb_device *d) +{ + int ret; + u16 frame_size; + u8 packet_size; + deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); + +#define TS_PACKET_SIZE 188 + +#define TS_USB20_PACKET_COUNT 348 +#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) + +#define TS_USB11_PACKET_COUNT 21 +#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) + +#define TS_USB20_MAX_PACKET_SIZE 512 +#define TS_USB11_MAX_PACKET_SIZE 64 + + if (d->udev->speed == USB_SPEED_FULL) { + frame_size = TS_USB11_FRAME_SIZE/4; + packet_size = TS_USB11_MAX_PACKET_SIZE/4; + } else { + frame_size = TS_USB20_FRAME_SIZE/4; + packet_size = TS_USB20_MAX_PACKET_SIZE/4; + } + + ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ + if (ret) + goto error; + } + ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + if (ret) + goto error; + } + /* EP4 xfer length */ + ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); + if (ret) + goto error; + /* EP5 xfer length */ + ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ + if (ret) + goto error; + } + + /* enable / disable mp2if2 */ + if (af9015_config.dual_mode) + ret = af9015_set_reg_bit(d, 0xd50b, 0); + else + ret = af9015_clear_reg_bit(d, 0xd50b, 0); +error: + if (ret) + err("endpoint init failed:%d", ret); + return ret; +} + +static int af9015_copy_firmware(struct dvb_usb_device *d) +{ + int ret; + u8 fw_params[4]; + u8 val, i; + struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), + fw_params }; + deb_info("%s:\n", __func__); + + fw_params[0] = af9015_config.firmware_size >> 8; + fw_params[1] = af9015_config.firmware_size & 0xff; + fw_params[2] = af9015_config.firmware_checksum >> 8; + fw_params[3] = af9015_config.firmware_checksum & 0xff; + + /* wait 2nd demodulator ready */ + msleep(100); + + ret = af9015_read_reg_i2c(d, 0x3a, 0x98be, &val); + if (ret) + goto error; + else + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + /* set I2C master clock to fast (to speed up firmware copy) */ + ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ + if (ret) + goto error; + + msleep(50); + + /* copy firmware */ + ret = af9015_ctrl_msg(d, &req); + if (ret) + err("firmware copy cmd failed:%d", ret); + deb_info("%s: firmware copy done\n", __func__); + + /* set I2C master clock back to normal */ + ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ + if (ret) + goto error; + + /* request boot firmware */ + ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address, + 0xe205, 1); + deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); + if (ret) + goto error; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9015_read_reg_i2c(d, + af9015_af9013_config[1].demod_address, 0x98be, &val); + deb_info("%s: firmware status cmd status:%d fw status:%02x\n", + __func__, ret, val); + if (ret) + goto error; + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + err("firmware did not run"); + ret = -1; + } else if (val != 0x0c) { + err("firmware boot timeout"); + ret = -1; + } + +error: +exit: + return ret; +} + +/* dump eeprom */ +static int af9015_eeprom_dump(struct dvb_usb_device *d) +{ + char buf[52], buf2[4]; + u8 reg, val; + + for (reg = 0; ; reg++) { + if (reg % 16 == 0) { + if (reg) + deb_info("%s\n", buf); + sprintf(buf, "%02x: ", reg); + } + if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0) + sprintf(buf2, "%02x ", val); + else + strcpy(buf2, "-- "); + strcat(buf, buf2); + if (reg == 0xff) + break; + } + deb_info("%s\n", buf); + return 0; +} + +int af9015_download_ir_table(struct dvb_usb_device *d) +{ + int i, packets = 0, ret; + u16 addr = 0x9a56; /* ir-table start address */ + struct req_t req = {WRITE_MEMORY, 0, 0, 0, 0, 1, NULL}; + u8 *data = NULL; + deb_info("%s:\n", __func__); + + data = af9015_config.ir_table; + packets = af9015_config.ir_table_size; + + /* no remote */ + if (!packets) + goto exit; + + /* load remote ir-table */ + for (i = 0; i < packets; i++) { + req.addr = addr + i; + req.data = &data[i]; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + err("ir-table download failed at packet %d with " \ + "code %d", i, ret); + return ret; + } + } + +exit: + return 0; +} + +static int af9015_init(struct dvb_usb_device *d) +{ + int ret; + deb_info("%s:\n", __func__); + + ret = af9015_init_endpoint(d); + if (ret) + goto error; + + ret = af9015_download_ir_table(d); + if (ret) + goto error; + +error: + return ret; +} + +static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + deb_info("%s: onoff:%d\n", __func__, onoff); + + if (onoff) + ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); + else + ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); + + return ret; +} + +static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + int ret; + u8 idx; + + deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", + __func__, index, pid, onoff); + + ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); + if (ret) + goto error; + + ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); + if (ret) + goto error; + + idx = ((index & 0x1f) | (1 << 5)); + ret = af9015_write_reg(adap->dev, 0xd504, idx); + +error: + return ret; +} + +static int af9015_download_firmware(struct usb_device *udev, + const struct firmware *fw) +{ + int i, len, packets, remainder, ret; + struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; + u16 addr = 0x5100; /* firmware start address */ + u16 checksum = 0; + + deb_info("%s:\n", __func__); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + af9015_config.firmware_size = fw->size; + af9015_config.firmware_checksum = checksum; + + #define FW_PACKET_MAX_DATA 55 + + packets = fw->size / FW_PACKET_MAX_DATA; + remainder = fw->size % FW_PACKET_MAX_DATA; + len = FW_PACKET_MAX_DATA; + for (i = 0; i <= packets; i++) { + if (i == packets) /* set size of the last packet */ + len = remainder; + + req.data_len = len; + req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); + req.addr = addr; + addr += FW_PACKET_MAX_DATA; + + ret = af9015_rw_udev(udev, &req); + if (ret) { + err("firmware download failed at packet %d with " \ + "code %d", i, ret); + goto error; + } + } + + /* firmware loaded, request boot */ + req.cmd = BOOT; + ret = af9015_rw_udev(udev, &req); + if (ret) { + err("firmware boot failed:%d", ret); + goto error; + } + + /* firmware is running, reconnect device in the usb bus */ + req.cmd = RECONNECT_USB; + ret = af9015_rw_udev(udev, &req); + if (ret) + err("reconnect failed: %d", ret); + +error: + return ret; +} + +static int af9015_read_config(struct usb_device *udev) +{ + int ret; + u8 val, i, offset = 0; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; + char manufacturer[10]; + + /* IR remote controller */ + req.addr = AF9015_EEPROM_IR_MODE; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + deb_info("%s: IR mode:%d\n", __func__, val); + for (i = 0; i < af9015_properties_count; i++) { + if (val == AF9015_IR_MODE_DISABLED || val == 0x04) { + af9015_properties[i].rc_key_map = NULL; + af9015_properties[i].rc_key_map_size = 0; + } else if (dvb_usb_af9015_remote) { + /* load remote defined as module param */ + switch (dvb_usb_af9015_remote) { + case AF9015_REMOTE_A_LINK_DTU_M: + af9015_properties[i].rc_key_map = + af9015_rc_keys_a_link; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_a_link); + af9015_config.ir_table = af9015_ir_table_a_link; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_a_link); + break; + case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3: + af9015_properties[i].rc_key_map = + af9015_rc_keys_msi; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_msi); + af9015_config.ir_table = af9015_ir_table_msi; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_msi); + break; + case AF9015_REMOTE_MYGICTV_U718: + af9015_properties[i].rc_key_map = + af9015_rc_keys_mygictv; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_mygictv); + af9015_config.ir_table = + af9015_ir_table_mygictv; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_mygictv); + break; + } + } else { + switch (udev->descriptor.idVendor) { + case USB_VID_LEADTEK: + af9015_properties[i].rc_key_map = + af9015_rc_keys_leadtek; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_leadtek); + af9015_config.ir_table = + af9015_ir_table_leadtek; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_leadtek); + break; + case USB_VID_VISIONPLUS: + if (udev->descriptor.idProduct == + USB_PID_AZUREWAVE_AD_TU700) { + af9015_properties[i].rc_key_map = + af9015_rc_keys_twinhan; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_twinhan); + af9015_config.ir_table = + af9015_ir_table_twinhan; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_twinhan); + } + break; + case USB_VID_KWORLD_2: + /* TODO: use correct rc keys */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_twinhan; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_twinhan); + af9015_config.ir_table = af9015_ir_table_kworld; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_kworld); + break; + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. */ + case USB_VID_AFATECH: + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("Geniatech", manufacturer)) { + /* iManufacturer 1 Geniatech + iProduct 2 AF9015 */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_mygictv; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_mygictv); + af9015_config.ir_table = + af9015_ir_table_mygictv; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_mygictv); + } else if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_msi; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_msi); + af9015_config.ir_table = + af9015_ir_table_msi; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_msi); + } + break; + } + } + } + + /* TS mode - one or two receivers */ + req.addr = AF9015_EEPROM_TS_MODE; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.dual_mode = val; + deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode); + /* disable dual mode by default because it is buggy */ + if (!dvb_usb_af9015_dual_mode) + af9015_config.dual_mode = 0; + + /* set buffer size according to USB port speed */ + for (i = 0; i < af9015_properties_count; i++) { + /* USB1.1 set smaller buffersize and disable 2nd adapter */ + if (udev->speed == USB_SPEED_FULL) { + af9015_properties[i].adapter->stream.u.bulk.buffersize = + TS_USB11_MAX_PACKET_SIZE; + /* disable 2nd adapter because we don't have + PID-filters */ + af9015_config.dual_mode = 0; + } else { + af9015_properties[i].adapter->stream.u.bulk.buffersize = + TS_USB20_MAX_PACKET_SIZE; + } + } + + if (af9015_config.dual_mode) { + /* read 2nd demodulator I2C address */ + req.addr = AF9015_EEPROM_DEMOD2_I2C; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[1].demod_address = val; + + /* enable 2nd adapter */ + for (i = 0; i < af9015_properties_count; i++) + af9015_properties[i].num_adapters = 2; + + } else { + /* disable 2nd adapter */ + for (i = 0; i < af9015_properties_count; i++) + af9015_properties[i].num_adapters = 1; + } + + for (i = 0; i < af9015_properties[0].num_adapters; i++) { + if (i == 1) + offset = AF9015_EEPROM_OFFSET; + /* xtal */ + req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + switch (val) { + case 0: + af9015_af9013_config[i].adc_clock = 28800; + break; + case 1: + af9015_af9013_config[i].adc_clock = 20480; + break; + case 2: + af9015_af9013_config[i].adc_clock = 28000; + break; + case 3: + af9015_af9013_config[i].adc_clock = 25000; + break; + }; + deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i, + val, af9015_af9013_config[i].adc_clock); + + /* tuner IF */ + req.addr = AF9015_EEPROM_IF1H + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[i].tuner_if = val << 8; + req.addr = AF9015_EEPROM_IF1L + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[i].tuner_if += val; + deb_info("%s: [%d] IF1:%d\n", __func__, i, + af9015_af9013_config[0].tuner_if); + + /* MT2060 IF1 */ + req.addr = AF9015_EEPROM_MT2060_IF1H + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.mt2060_if1[i] = val << 8; + req.addr = AF9015_EEPROM_MT2060_IF1L + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.mt2060_if1[i] += val; + deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i, + af9015_config.mt2060_if1[i]); + + /* tuner */ + req.addr = AF9015_EEPROM_TUNER_ID1 + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + switch (val) { + case AF9013_TUNER_ENV77H11D5: + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MC44S803: + case AF9013_TUNER_QT1010: + case AF9013_TUNER_UNKNOWN: + case AF9013_TUNER_MT2060_2: + case AF9013_TUNER_TDA18271: + case AF9013_TUNER_QT1010A: + af9015_af9013_config[i].rf_spec_inv = 1; + break; + case AF9013_TUNER_MXL5003D: + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + af9015_af9013_config[i].rf_spec_inv = 0; + break; + default: + warn("tuner id:%d not supported, please report!", val); + return -ENODEV; + }; + + af9015_af9013_config[i].tuner = val; + deb_info("%s: [%d] tuner id:%d\n", __func__, i, val); + } + +error: + if (ret) + err("eeprom read failed:%d", ret); + + return ret; +} + +static int af9015_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret; + u8 reply; + struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; + + ret = af9015_rw_udev(udev, &req); + if (ret) + return ret; + + deb_info("%s: reply:%02x\n", __func__, reply); + if (reply == 0x02) + *cold = 0; + else + *cold = 1; + + return ret; +} + +static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[8]; + struct req_t req = {GET_IR_CODE, 0, 0, 0, 0, sizeof(buf), buf}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + int i, ret; + + memset(buf, 0, sizeof(buf)); + + ret = af9015_ctrl_msg(d, &req); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (!buf[1] && keymap[i].custom == buf[0] && + keymap[i].data == buf[2]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + break; + } + } + if (!buf[1]) + deb_rc("%s: %02x %02x %02x %02x %02x %02x %02x %02x\n", + __func__, buf[0], buf[1], buf[2], buf[3], buf[4], + buf[5], buf[6], buf[7]); + + return 0; +} + +/* init 2nd I2C adapter */ +int af9015_i2c_init(struct dvb_usb_device *d) +{ + int ret; + struct af9015_state *state = d->priv; + deb_info("%s:\n", __func__); + + strncpy(state->i2c_adap.name, d->desc->name, + sizeof(state->i2c_adap.name)); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + state->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, +#else + state->i2c_adap.class = I2C_CLASS_TV_DIGITAL, +#endif + state->i2c_adap.algo = d->props.i2c_algo; + state->i2c_adap.algo_data = NULL; + state->i2c_adap.dev.parent = &d->udev->dev; + + i2c_set_adapdata(&state->i2c_adap, d); + + ret = i2c_add_adapter(&state->i2c_adap); + if (ret < 0) + err("could not add i2c adapter"); + + return ret; +} + +static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct af9015_state *state = adap->dev->priv; + struct i2c_adapter *i2c_adap; + + if (adap->id == 0) { + /* select I2C adapter */ + i2c_adap = &adap->dev->i2c_adap; + + deb_info("%s: init I2C\n", __func__); + ret = af9015_i2c_init(adap->dev); + + /* dump eeprom (debug) */ + ret = af9015_eeprom_dump(adap->dev); + if (ret) + return ret; + } else { + /* select I2C adapter */ + i2c_adap = &state->i2c_adap; + + /* copy firmware to 2nd demodulator */ + if (af9015_config.dual_mode) { + ret = af9015_copy_firmware(adap->dev); + if (ret) { + err("firmware copy to 2nd frontend " \ + "failed, will disable it"); + af9015_config.dual_mode = 0; + return -ENODEV; + } + } else { + return -ENODEV; + } + } + + /* attach demodulator */ + adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], + i2c_adap); + + return adap->fe == NULL ? -ENODEV : 0; +} + +static struct mt2060_config af9015_mt2060_config = { + .i2c_address = 0xc0, + .clock_out = 0, +}; + +static struct qt1010_config af9015_qt1010_config = { + .i2c_address = 0xc4, +}; + +static struct tda18271_config af9015_tda18271_config = { + .gate = TDA18271_GATE_DIGITAL, + .small_i2c = 1, +}; + +static struct mxl5005s_config af9015_mxl5003_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_DEFAULT, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mxl5005s_config af9015_mxl5005_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static int af9015_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct af9015_state *state = adap->dev->priv; + struct i2c_adapter *i2c_adap; + int ret; + deb_info("%s: \n", __func__); + + /* select I2C adapter */ + if (adap->id == 0) + i2c_adap = &adap->dev->i2c_adap; + else + i2c_adap = &state->i2c_adap; + + switch (af9015_af9013_config[adap->id].tuner) { + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MT2060_2: + ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap, + &af9015_mt2060_config, + af9015_config.mt2060_if1[adap->id]) + == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap, + &af9015_qt1010_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18271: + ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap, + &af9015_tda18271_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5003D: + ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + &af9015_mxl5003_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + &af9015_mxl5005_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_ENV77H11D5: + ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap, + DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MC44S803: +#if 0 + ret = dvb_attach(mc44s80x_attach, adap->fe, i2c_adap) + == NULL ? -ENODEV : 0; +#else + ret = -ENODEV; + info("Freescale MC44S803 tuner found but no driver for that" \ + "tuner. Look at the Linuxtv.org for tuner driver" \ + "status."); +#endif + break; + case AF9013_TUNER_UNKNOWN: + default: + ret = -ENODEV; + err("Unknown tuner id:%d", + af9015_af9013_config[adap->id].tuner); + } + return ret; +} + +static struct usb_device_id af9015_usb_table[] = { +/* 0 */{USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)}, + {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)}, + {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)}, + {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)}, +/* 5 */{USB_DEVICE(USB_VID_VISIONPLUS, + USB_PID_TINYTWIN)}, + {USB_DEVICE(USB_VID_VISIONPLUS, + USB_PID_AZUREWAVE_AD_TU700)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)}, +/* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, + {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, + {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, +/* 15 */{USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)}, + {0}, +}; +MODULE_DEVICE_TABLE(usb, af9015_usb_table); + +static struct dvb_usb_device_properties af9015_properties[] = { + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = af9015_download_firmware, + .firmware = "dvb-usb-af9015.fw", + + .size_of_priv = sizeof(struct af9015_state), \ + + .num_adapters = 2, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x84, + }, + }, + { + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x85, + }, + } + }, + + .identify_state = af9015_identify_state, + + .rc_query = af9015_rc_query, + .rc_interval = 150, + + .i2c_algo = &af9015_i2c_algo, + + .num_device_descs = 9, + .devices = { + { + .name = "Afatech AF9015 DVB-T USB2.0 stick", + .cold_ids = {&af9015_usb_table[0], + &af9015_usb_table[1], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Leadtek WinFast DTV Dongle Gold", + .cold_ids = {&af9015_usb_table[2], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Pinnacle PCTV 71e", + .cold_ids = {&af9015_usb_table[3], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "KWorld PlusTV Dual DVB-T Stick " \ + "(DVB-T 399U)", + .cold_ids = {&af9015_usb_table[4], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "DigitalNow TinyTwin DVB-T Receiver", + .cold_ids = {&af9015_usb_table[5], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "TwinHan AzureWave AD-TU700(704J)", + .cold_ids = {&af9015_usb_table[6], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "TerraTec Cinergy T USB XE", + .cold_ids = {&af9015_usb_table[7], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "KWorld PlusTV Dual DVB-T PCI " \ + "(DVB-T PC160-2T)", + .cold_ids = {&af9015_usb_table[8], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "AVerMedia AVerTV DVB-T Volar X", + .cold_ids = {&af9015_usb_table[9], NULL}, + .warm_ids = {NULL}, + }, + } + }, { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = af9015_download_firmware, + .firmware = "dvb-usb-af9015.fw", + + .size_of_priv = sizeof(struct af9015_state), \ + + .num_adapters = 2, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x84, + }, + }, + { + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x85, + }, + } + }, + + .identify_state = af9015_identify_state, + + .rc_query = af9015_rc_query, + .rc_interval = 150, + + .i2c_algo = &af9015_i2c_algo, + + .num_device_descs = 6, + .devices = { + { + .name = "Xtensions XD-380", + .cold_ids = {&af9015_usb_table[10], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "MSI DIGIVOX Duo", + .cold_ids = {&af9015_usb_table[11], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Fujitsu-Siemens Slim Mobile USB DVB-T", + .cold_ids = {&af9015_usb_table[12], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Telestar Starstick 2", + .cold_ids = {&af9015_usb_table[13], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "AVerMedia A309", + .cold_ids = {&af9015_usb_table[14], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "MSI Digi VOX mini III", + .cold_ids = {&af9015_usb_table[15], NULL}, + .warm_ids = {NULL}, + }, + } + } +}; + +static int af9015_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret = 0; + struct dvb_usb_device *d = NULL; + struct usb_device *udev = interface_to_usbdev(intf); + u8 i; + + deb_info("%s: interface:%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + /* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ + if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { + ret = af9015_read_config(udev); + if (ret) + return ret; + + for (i = 0; i < af9015_properties_count; i++) { + ret = dvb_usb_device_init(intf, &af9015_properties[i], + THIS_MODULE, &d, adapter_nr); + if (!ret) + break; + if (ret != -ENODEV) + return ret; + } + if (ret) + return ret; + + if (d) + ret = af9015_init(d); + } + + return ret; +} + +void af9015_i2c_exit(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + deb_info("%s: \n", __func__); + + /* remove 2nd I2C adapter */ + if (d->state & DVB_USB_STATE_I2C) + i2c_del_adapter(&state->i2c_adap); +} + +static void af9015_usb_device_exit(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + deb_info("%s: \n", __func__); + + /* remove 2nd I2C adapter */ + if (d != NULL && d->desc != NULL) + af9015_i2c_exit(d); + + dvb_usb_device_exit(intf); +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9015_usb_driver = { + .name = "dvb_usb_af9015", + .probe = af9015_usb_probe, + .disconnect = af9015_usb_device_exit, + .id_table = af9015_usb_table, +}; + +/* module stuff */ +static int __init af9015_usb_module_init(void) +{ + int ret; + ret = usb_register(&af9015_usb_driver); + if (ret) + err("module init failed:%d", ret); + + return ret; +} + +static void __exit af9015_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&af9015_usb_driver); +} + +module_init(af9015_usb_module_init); +module_exit(af9015_usb_module_exit); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Driver for Afatech AF9015 DVB-T"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h new file mode 100644 index 00000000000..882e8a4b368 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -0,0 +1,524 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_AF9015_H_ +#define _DVB_USB_AF9015_H_ + +#define DVB_USB_LOG_PREFIX "af9015" +#include "dvb-usb.h" + +extern int dvb_usb_af9015_debug; +#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_af9015_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_af9015_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_af9015_debug, 0x20, args) + +#define AF9015_I2C_EEPROM 0xa0 +#define AF9015_I2C_DEMOD 0x38 +#define AF9015_USB_TIMEOUT 2000 + +/* EEPROM locations */ +#define AF9015_EEPROM_IR_MODE 0x18 +#define AF9015_EEPROM_IR_REMOTE_TYPE 0x34 +#define AF9015_EEPROM_TS_MODE 0x31 +#define AF9015_EEPROM_DEMOD2_I2C 0x32 + +#define AF9015_EEPROM_SAW_BW1 0x35 +#define AF9015_EEPROM_XTAL_TYPE1 0x36 +#define AF9015_EEPROM_SPEC_INV1 0x37 +#define AF9015_EEPROM_IF1L 0x38 +#define AF9015_EEPROM_IF1H 0x39 +#define AF9015_EEPROM_MT2060_IF1L 0x3a +#define AF9015_EEPROM_MT2060_IF1H 0x3b +#define AF9015_EEPROM_TUNER_ID1 0x3c + +#define AF9015_EEPROM_SAW_BW2 0x45 +#define AF9015_EEPROM_XTAL_TYPE2 0x46 +#define AF9015_EEPROM_SPEC_INV2 0x47 +#define AF9015_EEPROM_IF2L 0x48 +#define AF9015_EEPROM_IF2H 0x49 +#define AF9015_EEPROM_MT2060_IF2L 0x4a +#define AF9015_EEPROM_MT2060_IF2H 0x4b +#define AF9015_EEPROM_TUNER_ID2 0x4c + +#define AF9015_EEPROM_OFFSET (AF9015_EEPROM_SAW_BW2 - AF9015_EEPROM_SAW_BW1) + +#define AF9015_GPIO_ON (1 << 0) +#define AF9015_GPIO_EN (1 << 1) +#define AF9015_GPIO_O (1 << 2) +#define AF9015_GPIO_I (1 << 3) + +#define AF9015_GPIO_TUNER_ON (AF9015_GPIO_ON|AF9015_GPIO_EN) +#define AF9015_GPIO_TUNER_OFF (AF9015_GPIO_ON|AF9015_GPIO_EN|AF9015_GPIO_O) + +struct req_t { + u8 cmd; /* [0] */ + /* seq */ /* [1] */ + u8 i2c_addr; /* [2] */ + u16 addr; /* [3|4] */ + u8 mbox; /* [5] */ + u8 addr_len; /* [6] */ + u8 data_len; /* [7] */ + u8 *data; +}; + +enum af9015_cmd { + GET_CONFIG = 0x10, + DOWNLOAD_FIRMWARE = 0x11, + BOOT = 0x13, + READ_MEMORY = 0x20, + WRITE_MEMORY = 0x21, + READ_WRITE_I2C = 0x22, + COPY_FIRMWARE = 0x23, + RECONNECT_USB = 0x5a, + WRITE_VIRTUAL_MEMORY = 0x26, + GET_IR_CODE = 0x27, + READ_I2C, + WRITE_I2C, +}; + +enum af9015_ir_mode { + AF9015_IR_MODE_DISABLED = 0, + AF9015_IR_MODE_HID, + AF9015_IR_MODE_RLC, + AF9015_IR_MODE_RC6, +}; + +struct af9015_state { + struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */ +}; + +struct af9015_config { + u8 dual_mode:1; + u16 mt2060_if1[2]; + u16 firmware_size; + u16 firmware_checksum; + u8 *ir_table; + u16 ir_table_size; +}; + +enum af9015_remote { + AF9015_REMOTE_NONE = 0, + AF9015_REMOTE_A_LINK_DTU_M, + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + AF9015_REMOTE_MYGICTV_U718, +}; + +/* Leadtek WinFast DTV Dongle Gold */ +static struct dvb_usb_rc_key af9015_rc_keys_leadtek[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x28, KEY_ENTER }, + { 0x00, 0x4f, KEY_VOLUMEUP }, + { 0x00, 0x50, KEY_VOLUMEDOWN }, + { 0x00, 0x51, KEY_CHANNELDOWN }, + { 0x00, 0x52, KEY_CHANNELUP }, +}; + +static u8 af9015_ir_table_leadtek[] = { + 0x03, 0xfc, 0x00, 0xff, 0x1a, 0x01, 0x00, + 0x03, 0xfc, 0x56, 0xa9, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4b, 0xb4, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4c, 0xb3, 0xb2, 0x04, 0x00, + 0x03, 0xfc, 0x4d, 0xb2, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4e, 0xb1, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x1f, 0xe0, 0x3d, 0x00, 0x00, + 0x03, 0xfc, 0x40, 0xbf, 0x13, 0x01, 0x00, + 0x03, 0xfc, 0x14, 0xeb, 0x10, 0x00, 0x00, + 0x03, 0xfc, 0x49, 0xb6, 0x05, 0x01, 0x00, + 0x03, 0xfc, 0x50, 0xaf, 0x29, 0x00, 0x00, + 0x03, 0xfc, 0x0c, 0xf3, 0x52, 0x00, 0x00, + 0x03, 0xfc, 0x03, 0xfc, 0x09, 0x00, 0x00, + 0x03, 0xfc, 0x08, 0xf7, 0x50, 0x00, 0x00, + 0x03, 0xfc, 0x13, 0xec, 0x28, 0x00, 0x00, + 0x03, 0xfc, 0x04, 0xfb, 0x4f, 0x00, 0x00, + 0x03, 0xfc, 0x4f, 0xb0, 0x0f, 0x01, 0x00, + 0x03, 0xfc, 0x10, 0xef, 0x51, 0x00, 0x00, + 0x03, 0xfc, 0x51, 0xae, 0x3f, 0x00, 0x00, + 0x03, 0xfc, 0x42, 0xbd, 0x13, 0x00, 0x00, + 0x03, 0xfc, 0x43, 0xbc, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x44, 0xbb, 0x11, 0x00, 0x00, + 0x03, 0xfc, 0x52, 0xad, 0x19, 0x00, 0x00, + 0x03, 0xfc, 0x54, 0xab, 0x05, 0x00, 0x00, + 0x03, 0xfc, 0x46, 0xb9, 0x29, 0x00, 0x00, + 0x03, 0xfc, 0x55, 0xaa, 0x2b, 0x00, 0x00, + 0x03, 0xfc, 0x53, 0xac, 0x41, 0x00, 0x00, + 0x03, 0xfc, 0x05, 0xfa, 0x1e, 0x00, 0x00, + 0x03, 0xfc, 0x06, 0xf9, 0x1f, 0x00, 0x00, + 0x03, 0xfc, 0x07, 0xf8, 0x20, 0x00, 0x00, + 0x03, 0xfc, 0x1e, 0xe1, 0x19, 0x00, 0x00, + 0x03, 0xfc, 0x09, 0xf6, 0x21, 0x00, 0x00, + 0x03, 0xfc, 0x0a, 0xf5, 0x22, 0x00, 0x00, + 0x03, 0xfc, 0x0b, 0xf4, 0x23, 0x00, 0x00, + 0x03, 0xfc, 0x1b, 0xe4, 0x16, 0x00, 0x00, + 0x03, 0xfc, 0x0d, 0xf2, 0x24, 0x00, 0x00, + 0x03, 0xfc, 0x0e, 0xf1, 0x25, 0x00, 0x00, + 0x03, 0xfc, 0x0f, 0xf0, 0x26, 0x00, 0x00, + 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, + 0x03, 0xfc, 0x41, 0xbe, 0x37, 0x00, 0x00, + 0x03, 0xfc, 0x12, 0xed, 0x27, 0x00, 0x00, + 0x03, 0xfc, 0x11, 0xee, 0x2a, 0x00, 0x00, + 0x03, 0xfc, 0x48, 0xb7, 0x2c, 0x00, 0x00, + 0x03, 0xfc, 0x4a, 0xb5, 0x3c, 0x00, 0x00, + 0x03, 0xfc, 0x47, 0xb8, 0x15, 0x01, 0x00, + 0x03, 0xfc, 0x45, 0xba, 0x0b, 0x01, 0x00, + 0x03, 0xfc, 0x5e, 0xa1, 0x43, 0x00, 0x00, + 0x03, 0xfc, 0x5a, 0xa5, 0x42, 0x00, 0x00, + 0x03, 0xfc, 0x5b, 0xa4, 0x4b, 0x00, 0x00, + 0x03, 0xfc, 0x5f, 0xa0, 0x4e, 0x00, 0x00, +}; + +/* TwinHan AzureWave AD-TU700(704J) */ +static struct dvb_usb_rc_key af9015_rc_keys_twinhan[] = { + { 0x05, 0x3f, KEY_POWER }, + { 0x00, 0x19, KEY_FAVORITES }, /* Favorite List */ + { 0x00, 0x04, KEY_TEXT }, /* Teletext */ + { 0x00, 0x0e, KEY_POWER }, + { 0x00, 0x0e, KEY_INFO }, /* Preview */ + { 0x00, 0x08, KEY_EPG }, /* Info/EPG */ + { 0x00, 0x0f, KEY_LIST }, /* Record List */ + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x29, KEY_CANCEL }, /* Cancel */ + { 0x00, 0x4c, KEY_CLEAR }, /* Clear */ + { 0x00, 0x2a, KEY_BACK }, /* Back */ + { 0x00, 0x2b, KEY_TAB }, /* Tab */ + { 0x00, 0x52, KEY_UP }, /* up arrow */ + { 0x00, 0x51, KEY_DOWN }, /* down arrow */ + { 0x00, 0x4f, KEY_RIGHT }, /* right arrow */ + { 0x00, 0x50, KEY_LEFT }, /* left arrow */ + { 0x00, 0x28, KEY_ENTER }, /* Enter / ok */ + { 0x02, 0x52, KEY_VOLUMEUP }, + { 0x02, 0x51, KEY_VOLUMEDOWN }, + { 0x00, 0x4e, KEY_CHANNELDOWN }, + { 0x00, 0x4b, KEY_CHANNELUP }, + { 0x00, 0x4a, KEY_RECORD }, + { 0x01, 0x11, KEY_PLAY }, + { 0x00, 0x17, KEY_PAUSE }, + { 0x00, 0x0c, KEY_REWIND }, /* FR << */ + { 0x00, 0x11, KEY_FASTFORWARD }, /* FF >> */ + { 0x01, 0x15, KEY_PREVIOUS }, /* Replay */ + { 0x01, 0x0e, KEY_NEXT }, /* Skip */ + { 0x00, 0x13, KEY_CAMERA }, /* Capture */ + { 0x01, 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x01, 0x13, KEY_TV2 }, /* PIP */ + { 0x00, 0x1d, KEY_ZOOM }, /* Full Screen */ + { 0x01, 0x17, KEY_SUBTITLE }, /* Subtitle / CC */ + { 0x00, 0x10, KEY_MUTE }, + { 0x01, 0x19, KEY_AUDIO }, /* L/R */ /* TODO better event */ + { 0x01, 0x16, KEY_SLEEP }, /* Hibernate */ + { 0x01, 0x16, KEY_SWITCHVIDEOMODE }, + /* A/V */ /* TODO does not work */ + { 0x00, 0x06, KEY_AGAIN }, /* Recall */ + { 0x01, 0x16, KEY_KPPLUS }, /* Zoom+ */ /* TODO does not work */ + { 0x01, 0x16, KEY_KPMINUS }, /* Zoom- */ /* TODO does not work */ + { 0x02, 0x15, KEY_RED }, + { 0x02, 0x0a, KEY_GREEN }, + { 0x02, 0x1c, KEY_YELLOW }, + { 0x02, 0x05, KEY_BLUE }, +}; + +static u8 af9015_ir_table_twinhan[] = { + 0x00, 0xff, 0x16, 0xe9, 0x3f, 0x05, 0x00, + 0x00, 0xff, 0x07, 0xf8, 0x16, 0x01, 0x00, + 0x00, 0xff, 0x14, 0xeb, 0x11, 0x01, 0x00, + 0x00, 0xff, 0x1a, 0xe5, 0x4d, 0x00, 0x00, + 0x00, 0xff, 0x4c, 0xb3, 0x17, 0x00, 0x00, + 0x00, 0xff, 0x12, 0xed, 0x11, 0x00, 0x00, + 0x00, 0xff, 0x40, 0xbf, 0x0c, 0x00, 0x00, + 0x00, 0xff, 0x11, 0xee, 0x4a, 0x00, 0x00, + 0x00, 0xff, 0x54, 0xab, 0x13, 0x00, 0x00, + 0x00, 0xff, 0x41, 0xbe, 0x15, 0x01, 0x00, + 0x00, 0xff, 0x42, 0xbd, 0x0e, 0x01, 0x00, + 0x00, 0xff, 0x43, 0xbc, 0x17, 0x01, 0x00, + 0x00, 0xff, 0x50, 0xaf, 0x0f, 0x01, 0x00, + 0x00, 0xff, 0x4d, 0xb2, 0x1d, 0x00, 0x00, + 0x00, 0xff, 0x47, 0xb8, 0x13, 0x01, 0x00, + 0x00, 0xff, 0x05, 0xfa, 0x4b, 0x00, 0x00, + 0x00, 0xff, 0x02, 0xfd, 0x4e, 0x00, 0x00, + 0x00, 0xff, 0x0e, 0xf1, 0x06, 0x00, 0x00, + 0x00, 0xff, 0x1e, 0xe1, 0x52, 0x02, 0x00, + 0x00, 0xff, 0x0a, 0xf5, 0x51, 0x02, 0x00, + 0x00, 0xff, 0x10, 0xef, 0x10, 0x00, 0x00, + 0x00, 0xff, 0x49, 0xb6, 0x19, 0x01, 0x00, + 0x00, 0xff, 0x15, 0xea, 0x27, 0x00, 0x00, + 0x00, 0xff, 0x03, 0xfc, 0x1e, 0x00, 0x00, + 0x00, 0xff, 0x01, 0xfe, 0x1f, 0x00, 0x00, + 0x00, 0xff, 0x06, 0xf9, 0x20, 0x00, 0x00, + 0x00, 0xff, 0x09, 0xf6, 0x21, 0x00, 0x00, + 0x00, 0xff, 0x1d, 0xe2, 0x22, 0x00, 0x00, + 0x00, 0xff, 0x1f, 0xe0, 0x23, 0x00, 0x00, + 0x00, 0xff, 0x0d, 0xf2, 0x24, 0x00, 0x00, + 0x00, 0xff, 0x19, 0xe6, 0x25, 0x00, 0x00, + 0x00, 0xff, 0x1b, 0xe4, 0x26, 0x00, 0x00, + 0x00, 0xff, 0x00, 0xff, 0x2b, 0x00, 0x00, + 0x00, 0xff, 0x4a, 0xb5, 0x4c, 0x00, 0x00, + 0x00, 0xff, 0x4b, 0xb4, 0x52, 0x00, 0x00, + 0x00, 0xff, 0x51, 0xae, 0x51, 0x00, 0x00, + 0x00, 0xff, 0x52, 0xad, 0x4f, 0x00, 0x00, + 0x00, 0xff, 0x4e, 0xb1, 0x50, 0x00, 0x00, + 0x00, 0xff, 0x0c, 0xf3, 0x29, 0x00, 0x00, + 0x00, 0xff, 0x4f, 0xb0, 0x28, 0x00, 0x00, + 0x00, 0xff, 0x13, 0xec, 0x2a, 0x00, 0x00, + 0x00, 0xff, 0x17, 0xe8, 0x19, 0x00, 0x00, + 0x00, 0xff, 0x04, 0xfb, 0x0f, 0x00, 0x00, + 0x00, 0xff, 0x48, 0xb7, 0x0e, 0x00, 0x00, + 0x00, 0xff, 0x0f, 0xf0, 0x04, 0x00, 0x00, + 0x00, 0xff, 0x1c, 0xe3, 0x08, 0x00, 0x00, + 0x00, 0xff, 0x18, 0xe7, 0x15, 0x02, 0x00, + 0x00, 0xff, 0x53, 0xac, 0x0a, 0x02, 0x00, + 0x00, 0xff, 0x5e, 0xa1, 0x1c, 0x02, 0x00, + 0x00, 0xff, 0x5f, 0xa0, 0x05, 0x02, 0x00, +}; + +/* A-Link DTU(m) */ +static struct dvb_usb_rc_key af9015_rc_keys_a_link[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x2e, KEY_CHANNELUP }, + { 0x00, 0x2d, KEY_CHANNELDOWN }, + { 0x04, 0x28, KEY_ZOOM }, + { 0x00, 0x41, KEY_MUTE }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x00, 0x44, KEY_GOTO }, /* jump */ + { 0x05, 0x45, KEY_POWER }, +}; + +static u8 af9015_ir_table_a_link[] = { + 0x08, 0xf7, 0x12, 0xed, 0x45, 0x05, 0x00, /* power */ + 0x08, 0xf7, 0x1a, 0xe5, 0x41, 0x00, 0x00, /* mute */ + 0x08, 0xf7, 0x01, 0xfe, 0x1e, 0x00, 0x00, /* 1 */ + 0x08, 0xf7, 0x1c, 0xe3, 0x21, 0x00, 0x00, /* 4 */ + 0x08, 0xf7, 0x03, 0xfc, 0x24, 0x00, 0x00, /* 7 */ + 0x08, 0xf7, 0x05, 0xfa, 0x28, 0x04, 0x00, /* zoom */ + 0x08, 0xf7, 0x00, 0xff, 0x43, 0x00, 0x00, /* volume up */ + 0x08, 0xf7, 0x16, 0xe9, 0x42, 0x00, 0x00, /* volume down */ + 0x08, 0xf7, 0x0f, 0xf0, 0x1f, 0x00, 0x00, /* 2 */ + 0x08, 0xf7, 0x0d, 0xf2, 0x22, 0x00, 0x00, /* 5 */ + 0x08, 0xf7, 0x1b, 0xe4, 0x25, 0x00, 0x00, /* 8 */ + 0x08, 0xf7, 0x06, 0xf9, 0x27, 0x00, 0x00, /* 0 */ + 0x08, 0xf7, 0x14, 0xeb, 0x2e, 0x00, 0x00, /* channel up */ + 0x08, 0xf7, 0x1d, 0xe2, 0x2d, 0x00, 0x00, /* channel down */ + 0x08, 0xf7, 0x02, 0xfd, 0x20, 0x00, 0x00, /* 3 */ + 0x08, 0xf7, 0x18, 0xe7, 0x23, 0x00, 0x00, /* 6 */ + 0x08, 0xf7, 0x04, 0xfb, 0x26, 0x00, 0x00, /* 9 */ + 0x08, 0xf7, 0x07, 0xf8, 0x44, 0x00, 0x00, /* jump */ +}; + +/* MSI DIGIVOX mini II V3.0 */ +static struct dvb_usb_rc_key af9015_rc_keys_msi[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x03, 0x0f, KEY_CHANNELUP }, + { 0x03, 0x0e, KEY_CHANNELDOWN }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x05, 0x45, KEY_POWER }, + { 0x00, 0x52, KEY_UP }, /* up */ + { 0x00, 0x51, KEY_DOWN }, /* down */ + { 0x00, 0x28, KEY_ENTER }, +}; + +static u8 af9015_ir_table_msi[] = { + 0x03, 0xfc, 0x17, 0xe8, 0x45, 0x05, 0x00, /* power */ + 0x03, 0xfc, 0x0d, 0xf2, 0x51, 0x00, 0x00, /* down */ + 0x03, 0xfc, 0x03, 0xfc, 0x52, 0x00, 0x00, /* up */ + 0x03, 0xfc, 0x1a, 0xe5, 0x1e, 0x00, 0x00, /* 1 */ + 0x03, 0xfc, 0x02, 0xfd, 0x1f, 0x00, 0x00, /* 2 */ + 0x03, 0xfc, 0x04, 0xfb, 0x20, 0x00, 0x00, /* 3 */ + 0x03, 0xfc, 0x1c, 0xe3, 0x21, 0x00, 0x00, /* 4 */ + 0x03, 0xfc, 0x08, 0xf7, 0x22, 0x00, 0x00, /* 5 */ + 0x03, 0xfc, 0x1d, 0xe2, 0x23, 0x00, 0x00, /* 6 */ + 0x03, 0xfc, 0x11, 0xee, 0x24, 0x00, 0x00, /* 7 */ + 0x03, 0xfc, 0x0b, 0xf4, 0x25, 0x00, 0x00, /* 8 */ + 0x03, 0xfc, 0x10, 0xef, 0x26, 0x00, 0x00, /* 9 */ + 0x03, 0xfc, 0x09, 0xf6, 0x27, 0x00, 0x00, /* 0 */ + 0x03, 0xfc, 0x14, 0xeb, 0x43, 0x00, 0x00, /* volume up */ + 0x03, 0xfc, 0x1f, 0xe0, 0x42, 0x00, 0x00, /* volume down */ + 0x03, 0xfc, 0x15, 0xea, 0x0f, 0x03, 0x00, /* channel up */ + 0x03, 0xfc, 0x05, 0xfa, 0x0e, 0x03, 0x00, /* channel down */ + 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, /* enter */ +}; + +/* MYGICTV U718 */ +static struct dvb_usb_rc_key af9015_rc_keys_mygictv[] = { + { 0x00, 0x3d, KEY_SWITCHVIDEOMODE }, + /* TV / AV */ + { 0x05, 0x45, KEY_POWER }, + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x41, KEY_MUTE }, + { 0x00, 0x2a, KEY_ESC }, /* Esc */ + { 0x00, 0x2e, KEY_CHANNELUP }, + { 0x00, 0x2d, KEY_CHANNELDOWN }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x00, 0x52, KEY_UP }, /* up arrow */ + { 0x00, 0x51, KEY_DOWN }, /* down arrow */ + { 0x00, 0x4f, KEY_RIGHT }, /* right arrow */ + { 0x00, 0x50, KEY_LEFT }, /* left arrow */ + { 0x00, 0x28, KEY_ENTER }, /* ok */ + { 0x01, 0x15, KEY_RECORD }, + { 0x03, 0x13, KEY_PLAY }, + { 0x01, 0x13, KEY_PAUSE }, + { 0x01, 0x16, KEY_STOP }, + { 0x03, 0x07, KEY_REWIND }, /* FR << */ + { 0x03, 0x09, KEY_FASTFORWARD }, /* FF >> */ + { 0x00, 0x3b, KEY_TIME }, /* TimeShift */ + { 0x00, 0x3e, KEY_CAMERA }, /* Snapshot */ + { 0x03, 0x16, KEY_CYCLEWINDOWS }, /* yellow, min / max */ + { 0x00, 0x00, KEY_ZOOM }, /* 'select' (?) */ + { 0x03, 0x16, KEY_SHUFFLE }, /* Shuffle */ + { 0x03, 0x45, KEY_POWER }, +}; + +static u8 af9015_ir_table_mygictv[] = { + 0x02, 0xbd, 0x0c, 0xf3, 0x3d, 0x00, 0x00, /* TV / AV */ + 0x02, 0xbd, 0x14, 0xeb, 0x45, 0x05, 0x00, /* power */ + 0x02, 0xbd, 0x00, 0xff, 0x1e, 0x00, 0x00, /* 1 */ + 0x02, 0xbd, 0x01, 0xfe, 0x1f, 0x00, 0x00, /* 2 */ + 0x02, 0xbd, 0x02, 0xfd, 0x20, 0x00, 0x00, /* 3 */ + 0x02, 0xbd, 0x03, 0xfc, 0x21, 0x00, 0x00, /* 4 */ + 0x02, 0xbd, 0x04, 0xfb, 0x22, 0x00, 0x00, /* 5 */ + 0x02, 0xbd, 0x05, 0xfa, 0x23, 0x00, 0x00, /* 6 */ + 0x02, 0xbd, 0x06, 0xf9, 0x24, 0x00, 0x00, /* 7 */ + 0x02, 0xbd, 0x07, 0xf8, 0x25, 0x00, 0x00, /* 8 */ + 0x02, 0xbd, 0x08, 0xf7, 0x26, 0x00, 0x00, /* 9 */ + 0x02, 0xbd, 0x09, 0xf6, 0x27, 0x00, 0x00, /* 0 */ + 0x02, 0xbd, 0x0a, 0xf5, 0x41, 0x00, 0x00, /* mute */ + 0x02, 0xbd, 0x1c, 0xe3, 0x2a, 0x00, 0x00, /* esc */ + 0x02, 0xbd, 0x1f, 0xe0, 0x43, 0x00, 0x00, /* volume up */ + 0x02, 0xbd, 0x12, 0xed, 0x52, 0x00, 0x00, /* up arrow */ + 0x02, 0xbd, 0x11, 0xee, 0x50, 0x00, 0x00, /* left arrow */ + 0x02, 0xbd, 0x15, 0xea, 0x28, 0x00, 0x00, /* ok */ + 0x02, 0xbd, 0x10, 0xef, 0x4f, 0x00, 0x00, /* right arrow */ + 0x02, 0xbd, 0x13, 0xec, 0x51, 0x00, 0x00, /* down arrow */ + 0x02, 0xbd, 0x0e, 0xf1, 0x42, 0x00, 0x00, /* volume down */ + 0x02, 0xbd, 0x19, 0xe6, 0x15, 0x01, 0x00, /* record */ + 0x02, 0xbd, 0x1e, 0xe1, 0x13, 0x03, 0x00, /* play */ + 0x02, 0xbd, 0x16, 0xe9, 0x16, 0x01, 0x00, /* stop */ + 0x02, 0xbd, 0x0b, 0xf4, 0x28, 0x04, 0x00, /* yellow, min / max */ + 0x02, 0xbd, 0x0f, 0xf0, 0x3b, 0x00, 0x00, /* time shift */ + 0x02, 0xbd, 0x18, 0xe7, 0x2e, 0x00, 0x00, /* channel up */ + 0x02, 0xbd, 0x1a, 0xe5, 0x2d, 0x00, 0x00, /* channel down */ + 0x02, 0xbd, 0x17, 0xe8, 0x3e, 0x00, 0x00, /* snapshot */ + 0x02, 0xbd, 0x40, 0xbf, 0x13, 0x01, 0x00, /* pause */ + 0x02, 0xbd, 0x41, 0xbe, 0x09, 0x03, 0x00, /* FF >> */ + 0x02, 0xbd, 0x42, 0xbd, 0x07, 0x03, 0x00, /* FR << */ + 0x02, 0xbd, 0x43, 0xbc, 0x00, 0x00, 0x00, /* 'select' (?) */ + 0x02, 0xbd, 0x44, 0xbb, 0x16, 0x03, 0x00, /* shuffle */ + 0x02, 0xbd, 0x45, 0xba, 0x45, 0x03, 0x00, /* power */ +}; + +/* KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) */ +static u8 af9015_ir_table_kworld[] = { + 0x86, 0x6b, 0x0c, 0xf3, 0x2e, 0x07, 0x00, + 0x86, 0x6b, 0x16, 0xe9, 0x2d, 0x07, 0x00, + 0x86, 0x6b, 0x1d, 0xe2, 0x37, 0x07, 0x00, + 0x86, 0x6b, 0x00, 0xff, 0x1e, 0x07, 0x00, + 0x86, 0x6b, 0x01, 0xfe, 0x1f, 0x07, 0x00, + 0x86, 0x6b, 0x02, 0xfd, 0x20, 0x07, 0x00, + 0x86, 0x6b, 0x03, 0xfc, 0x21, 0x07, 0x00, + 0x86, 0x6b, 0x04, 0xfb, 0x22, 0x07, 0x00, + 0x86, 0x6b, 0x05, 0xfa, 0x23, 0x07, 0x00, + 0x86, 0x6b, 0x06, 0xf9, 0x24, 0x07, 0x00, + 0x86, 0x6b, 0x07, 0xf8, 0x25, 0x07, 0x00, + 0x86, 0x6b, 0x08, 0xf7, 0x26, 0x07, 0x00, + 0x86, 0x6b, 0x09, 0xf6, 0x4d, 0x07, 0x00, + 0x86, 0x6b, 0x0a, 0xf5, 0x4e, 0x07, 0x00, + 0x86, 0x6b, 0x14, 0xeb, 0x4f, 0x07, 0x00, + 0x86, 0x6b, 0x1e, 0xe1, 0x50, 0x07, 0x00, + 0x86, 0x6b, 0x17, 0xe8, 0x52, 0x07, 0x00, + 0x86, 0x6b, 0x1f, 0xe0, 0x51, 0x07, 0x00, + 0x86, 0x6b, 0x0e, 0xf1, 0x0b, 0x07, 0x00, + 0x86, 0x6b, 0x20, 0xdf, 0x0c, 0x07, 0x00, + 0x86, 0x6b, 0x42, 0xbd, 0x0d, 0x07, 0x00, + 0x86, 0x6b, 0x0b, 0xf4, 0x0e, 0x07, 0x00, + 0x86, 0x6b, 0x43, 0xbc, 0x0f, 0x07, 0x00, + 0x86, 0x6b, 0x10, 0xef, 0x10, 0x07, 0x00, + 0x86, 0x6b, 0x21, 0xde, 0x11, 0x07, 0x00, + 0x86, 0x6b, 0x13, 0xec, 0x12, 0x07, 0x00, + 0x86, 0x6b, 0x11, 0xee, 0x13, 0x07, 0x00, + 0x86, 0x6b, 0x12, 0xed, 0x14, 0x07, 0x00, + 0x86, 0x6b, 0x19, 0xe6, 0x15, 0x07, 0x00, + 0x86, 0x6b, 0x1a, 0xe5, 0x16, 0x07, 0x00, + 0x86, 0x6b, 0x1b, 0xe4, 0x17, 0x07, 0x00, + 0x86, 0x6b, 0x4b, 0xb4, 0x18, 0x07, 0x00, + 0x86, 0x6b, 0x40, 0xbf, 0x19, 0x07, 0x00, + 0x86, 0x6b, 0x44, 0xbb, 0x1a, 0x07, 0x00, + 0x86, 0x6b, 0x41, 0xbe, 0x1b, 0x07, 0x00, + 0x86, 0x6b, 0x22, 0xdd, 0x1c, 0x07, 0x00, + 0x86, 0x6b, 0x15, 0xea, 0x1d, 0x07, 0x00, + 0x86, 0x6b, 0x0f, 0xf0, 0x3f, 0x07, 0x00, + 0x86, 0x6b, 0x1c, 0xe3, 0x40, 0x07, 0x00, + 0x86, 0x6b, 0x4a, 0xb5, 0x41, 0x07, 0x00, + 0x86, 0x6b, 0x48, 0xb7, 0x42, 0x07, 0x00, + 0x86, 0x6b, 0x49, 0xb6, 0x43, 0x07, 0x00, + 0x86, 0x6b, 0x18, 0xe7, 0x44, 0x07, 0x00, + 0x86, 0x6b, 0x23, 0xdc, 0x45, 0x07, 0x00, +}; + +#endif diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 2f408d2e1ef..c786359fba0 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -41,6 +41,9 @@ static int dvb_usb_anysee_debug; module_param_named(debug, dvb_usb_anysee_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +int dvb_usb_anysee_delsys; +module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); +MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static struct mutex anysee_usb_mutex; @@ -178,14 +181,14 @@ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, inc = 1; } if (ret) - return ret; + break; i += inc; } mutex_unlock(&d->i2c_mutex); - return i; + return ret ? ret : i; } static u32 anysee_i2c_func(struct i2c_adapter *adapter) @@ -272,9 +275,11 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) model demod hw firmware 1. E30 MT352 02 0.2.1 2. E30 ZL10353 02 0.2.1 - 3. E30 Plus ZL10353 06 0.1.0 - 4. E30C Plus TDA10023 0a 0.1.0 rev 0.2 - 4. E30C Plus TDA10023 0f 0.1.2 rev 0.4 + 3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo + 4. E30 Plus ZL10353 06 0.1.0 + 5. E30C Plus TDA10023 0a 0.1.0 rev 0.2 + E30C Plus TDA10023 0f 0.1.2 rev 0.4 + E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo */ /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ @@ -293,6 +298,21 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) return 0; } + /* for E30 Combo Plus DVB-T demodulator */ + if (dvb_usb_anysee_delsys) { + ret = anysee_write_reg(adap->dev, 0xb0, 0x01); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + } + /* connect demod on IO port D for TDA10023 & ZL10353 */ ret = anysee_write_reg(adap->dev, 0xb0, 0x25); if (ret) diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c new file mode 100644 index 00000000000..3ac9f74e9fb --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c @@ -0,0 +1,268 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "cinergyT2.h" + + +/* debug */ +int dvb_usb_cinergyt2_debug; +int disable_remote; + +module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " + "(or-able))."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct cinergyt2_state { + u8 rc_counter; +}; + +/* We are missing a release hook with usb_device data */ +struct dvb_usb_device *cinergyt2_usb_device; + +static struct dvb_usb_device_properties cinergyt2_properties; + +static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) +{ + char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; + char result[64]; + return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, + sizeof(result), 0); +} + +static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) +{ + char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; + char state[3]; + return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); +} + +static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) +{ + char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; + char state[3]; + int ret; + + adap->fe = cinergyt2_fe_attach(adap->dev); + + ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, + sizeof(state), 0); + if (ret < 0) { + deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " + "state info\n"); + } + + /* Copy this pointer as we are gonna need it in the release phase */ + cinergyt2_usb_device = adap->dev; + + return 0; +} + +static struct dvb_usb_rc_key cinergyt2_rc_keys[] = { + { 0x04, 0x01, KEY_POWER }, + { 0x04, 0x02, KEY_1 }, + { 0x04, 0x03, KEY_2 }, + { 0x04, 0x04, KEY_3 }, + { 0x04, 0x05, KEY_4 }, + { 0x04, 0x06, KEY_5 }, + { 0x04, 0x07, KEY_6 }, + { 0x04, 0x08, KEY_7 }, + { 0x04, 0x09, KEY_8 }, + { 0x04, 0x0a, KEY_9 }, + { 0x04, 0x0c, KEY_0 }, + { 0x04, 0x0b, KEY_VIDEO }, + { 0x04, 0x0d, KEY_REFRESH }, + { 0x04, 0x0e, KEY_SELECT }, + { 0x04, 0x0f, KEY_EPG }, + { 0x04, 0x10, KEY_UP }, + { 0x04, 0x14, KEY_DOWN }, + { 0x04, 0x11, KEY_LEFT }, + { 0x04, 0x13, KEY_RIGHT }, + { 0x04, 0x12, KEY_OK }, + { 0x04, 0x15, KEY_TEXT }, + { 0x04, 0x16, KEY_INFO }, + { 0x04, 0x17, KEY_RED }, + { 0x04, 0x18, KEY_GREEN }, + { 0x04, 0x19, KEY_YELLOW }, + { 0x04, 0x1a, KEY_BLUE }, + { 0x04, 0x1c, KEY_VOLUMEUP }, + { 0x04, 0x1e, KEY_VOLUMEDOWN }, + { 0x04, 0x1d, KEY_MUTE }, + { 0x04, 0x1b, KEY_CHANNELUP }, + { 0x04, 0x1f, KEY_CHANNELDOWN }, + { 0x04, 0x40, KEY_PAUSE }, + { 0x04, 0x4c, KEY_PLAY }, + { 0x04, 0x58, KEY_RECORD }, + { 0x04, 0x54, KEY_PREVIOUS }, + { 0x04, 0x48, KEY_STOP }, + { 0x04, 0x5c, KEY_NEXT } +}; + +/* Number of keypresses to ignore before detect repeating */ +#define RC_REPEAT_DELAY 3 + +static int repeatable_keys[] = { + KEY_UP, + KEY_DOWN, + KEY_LEFT, + KEY_RIGHT, + KEY_VOLUMEUP, + KEY_VOLUMEDOWN, + KEY_CHANNELUP, + KEY_CHANNELDOWN +}; + +static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct cinergyt2_state *st = d->priv; + u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; + int i; + + *state = REMOTE_NO_KEY_PRESSED; + + dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); + if (key[4] == 0xff) { + /* key repeat */ + st->rc_counter++; + if (st->rc_counter > RC_REPEAT_DELAY) { + for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { + if (d->last_event == repeatable_keys[i]) { + *state = REMOTE_KEY_REPEAT; + *event = d->last_event; + deb_rc("repeat key, event %x\n", + *event); + return 0; + } + } + deb_rc("repeated key (non repeatable)\n"); + } + return 0; + } + + /* hack to pass checksum on the custom field */ + key[2] = ~key[1]; + dvb_usb_nec_rc_key_to_event(d, key, event, state); + if (key[0] != 0) { + if (*event != d->last_event) + st->rc_counter = 0; + + deb_rc("key: %x %x %x %x %x\n", + key[0], key[1], key[2], key[3], key[4]); + } + return 0; +} + +static int cinergyt2_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, NULL, adapter_nr); +} + + +static struct usb_device_id cinergyt2_usb_table[] = { + { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); + +static struct dvb_usb_device_properties cinergyt2_properties = { + .size_of_priv = sizeof(struct cinergyt2_state), + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cinergyt2_streaming_ctrl, + .frontend_attach = cinergyt2_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .power_ctrl = cinergyt2_power_ctrl, + + .rc_interval = 50, + .rc_key_map = cinergyt2_rc_keys, + .rc_key_map_size = ARRAY_SIZE(cinergyt2_rc_keys), + .rc_query = cinergyt2_rc_query, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver", + .cold_ids = {NULL}, + .warm_ids = { &cinergyt2_usb_table[0], NULL }, + }, + { NULL }, + } +}; + + +static struct usb_driver cinergyt2_driver = { + .name = "cinergyT2", + .probe = cinergyt2_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = cinergyt2_usb_table +}; + +static int __init cinergyt2_usb_init(void) +{ + int err; + + err = usb_register(&cinergyt2_driver); + if (err) { + err("usb_register() failed! (err %i)\n", err); + return err; + } + return 0; +} + +static void __exit cinergyt2_usb_exit(void) +{ + usb_deregister(&cinergyt2_driver); +} + +module_init(cinergyt2_usb_init); +module_exit(cinergyt2_usb_exit); + +MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tomi Orava"); diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c new file mode 100644 index 00000000000..649f25cca49 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c @@ -0,0 +1,351 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "cinergyT2.h" + + +/** + * convert linux-dvb frontend parameter set into TPS. + * See ETSI ETS-300744, section 4.6.2, table 9 for details. + * + * This function is probably reusable and may better get placed in a support + * library. + * + * We replace errornous fields by default TPS fields (the ones with value 0). + */ + +static uint16_t compute_tps(struct dvb_frontend_parameters *p) +{ + struct dvb_ofdm_parameters *op = &p->u.ofdm; + uint16_t tps = 0; + + switch (op->code_rate_HP) { + case FEC_2_3: + tps |= (1 << 7); + break; + case FEC_3_4: + tps |= (2 << 7); + break; + case FEC_5_6: + tps |= (3 << 7); + break; + case FEC_7_8: + tps |= (4 << 7); + break; + case FEC_1_2: + case FEC_AUTO: + default: + /* tps |= (0 << 7) */; + } + + switch (op->code_rate_LP) { + case FEC_2_3: + tps |= (1 << 4); + break; + case FEC_3_4: + tps |= (2 << 4); + break; + case FEC_5_6: + tps |= (3 << 4); + break; + case FEC_7_8: + tps |= (4 << 4); + break; + case FEC_1_2: + case FEC_AUTO: + default: + /* tps |= (0 << 4) */; + } + + switch (op->constellation) { + case QAM_16: + tps |= (1 << 13); + break; + case QAM_64: + tps |= (2 << 13); + break; + case QPSK: + default: + /* tps |= (0 << 13) */; + } + + switch (op->transmission_mode) { + case TRANSMISSION_MODE_8K: + tps |= (1 << 0); + break; + case TRANSMISSION_MODE_2K: + default: + /* tps |= (0 << 0) */; + } + + switch (op->guard_interval) { + case GUARD_INTERVAL_1_16: + tps |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + tps |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + tps |= (3 << 2); + break; + case GUARD_INTERVAL_1_32: + default: + /* tps |= (0 << 2) */; + } + + switch (op->hierarchy_information) { + case HIERARCHY_1: + tps |= (1 << 10); + break; + case HIERARCHY_2: + tps |= (2 << 10); + break; + case HIERARCHY_4: + tps |= (3 << 10); + break; + case HIERARCHY_NONE: + default: + /* tps |= (0 << 10) */; + } + + return tps; +} + +struct cinergyt2_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; +}; + +static int cinergyt2_fe_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg result; + u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, + sizeof(result), 0); + if (ret < 0) + return ret; + + *status = 0; + + if (0xffff - le16_to_cpu(result.gain) > 30) + *status |= FE_HAS_SIGNAL; + if (result.lock_bits & (1 << 6)) + *status |= FE_HAS_LOCK; + if (result.lock_bits & (1 << 5)) + *status |= FE_HAS_SYNC; + if (result.lock_bits & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (result.lock_bits & (1 << 1)) + *status |= FE_HAS_VITERBI; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) + return ret; + + *ber = le32_to_cpu(status.viterbi_error_rate); + return 0; +} + +static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", + ret); + return ret; + } + *unc = le32_to_cpu(status.uncorrected_block_count); + return 0; +} + +static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_signal_strength() Failed!" + " (Error=%d)\n", ret); + return ret; + } + *strength = (0xffff - le16_to_cpu(status.gain)); + return 0; +} + +static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); + return ret; + } + *snr = (status.snr << 8) | status.snr; + return 0; +} + +static int cinergyt2_fe_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int cinergyt2_fe_sleep(struct dvb_frontend *fe) +{ + deb_info("cinergyt2_fe_sleep() Called\n"); + return 0; +} + +static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_set_parameters_msg param; + char result[2]; + int err; + + param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; + param.tps = cpu_to_le16(compute_tps(fep)); + param.freq = cpu_to_le32(fep->frequency / 1000); + param.bandwidth = 8 - fep->u.ofdm.bandwidth - BANDWIDTH_8_MHZ; + + err = dvb_usb_generic_rw(state->d, + (char *)¶m, sizeof(param), + result, sizeof(result), 0); + if (err < 0) + err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); + + return (err < 0) ? err : 0; +} + +static int cinergyt2_fe_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + return 0; +} + +static void cinergyt2_fe_release(struct dvb_frontend *fe) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + if (state != NULL) + kfree(state); +} + +static struct dvb_frontend_ops cinergyt2_fe_ops; + +struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) +{ + struct cinergyt2_fe_state *s = kzalloc(sizeof( + struct cinergyt2_fe_state), GFP_KERNEL); + if (s == NULL) + return NULL; + + s->d = d; + memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + return &s->fe; +} + + +static struct dvb_frontend_ops cinergyt2_fe_ops = { + .info = { + .name = DRIVER_NAME, + .type = FE_OFDM, + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 166667, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 + | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 + | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 + | FE_CAN_FEC_AUTO | FE_CAN_QPSK + | FE_CAN_QAM_16 | FE_CAN_QAM_64 + | FE_CAN_QAM_AUTO + | FE_CAN_TRANSMISSION_MODE_AUTO + | FE_CAN_GUARD_INTERVAL_AUTO + | FE_CAN_HIERARCHY_AUTO + | FE_CAN_RECOVER + | FE_CAN_MUTE_TS + }, + + .release = cinergyt2_fe_release, + + .init = cinergyt2_fe_init, + .sleep = cinergyt2_fe_sleep, + + .set_frontend = cinergyt2_fe_set_frontend, + .get_frontend = cinergyt2_fe_get_frontend, + .get_tune_settings = cinergyt2_fe_get_tune_settings, + + .read_status = cinergyt2_fe_read_status, + .read_ber = cinergyt2_fe_read_ber, + .read_signal_strength = cinergyt2_fe_read_signal_strength, + .read_snr = cinergyt2_fe_read_snr, + .read_ucblocks = cinergyt2_fe_read_unc_blocks, +}; diff --git a/drivers/media/dvb/dvb-usb/cinergyT2.h b/drivers/media/dvb/dvb-usb/cinergyT2.h new file mode 100644 index 00000000000..11d79eb384c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2.h @@ -0,0 +1,95 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_CINERGYT2_H_ +#define _DVB_USB_CINERGYT2_H_ + +#include <linux/usb/input.h> + +#define DVB_USB_LOG_PREFIX "cinergyT2" +#include "dvb-usb.h" + +#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" + +extern int dvb_usb_cinergyt2_debug; + +#define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) +#define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) +#define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) +#define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) +#define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) +#define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) +#define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) +#define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) +#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args) + + + +enum cinergyt2_ep1_cmd { + CINERGYT2_EP1_PID_TABLE_RESET = 0x01, + CINERGYT2_EP1_PID_SETUP = 0x02, + CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, + CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, + CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, + CINERGYT2_EP1_START_SCAN = 0x06, + CINERGYT2_EP1_CONTINUE_SCAN = 0x07, + CINERGYT2_EP1_GET_RC_EVENTS = 0x08, + CINERGYT2_EP1_SLEEP_MODE = 0x09, + CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A +}; + + +struct dvbt_get_status_msg { + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; + uint16_t gain; + uint8_t snr; + uint32_t viterbi_error_rate; + uint32_t rs_error_rate; + uint32_t uncorrected_block_count; + uint8_t lock_bits; + uint8_t prev_lock_bits; +} __attribute__((packed)); + + +struct dvbt_set_parameters_msg { + uint8_t cmd; + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; +} __attribute__((packed)); + + +extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d); + +#endif /* _DVB_USB_CINERGYT2_H_ */ + diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 563400277a4..406d7fba369 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -36,6 +36,9 @@ #include "tuner-xc2028.h" #include "tuner-simple.h" #include "mxl5005s.h" +#include "dib7000p.h" +#include "dib0070.h" +#include "lgs8gl5.h" /* debug */ static int dvb_usb_cxusb_debug; @@ -109,6 +112,25 @@ static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); } +static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, + u8 addr, int onoff) +{ + u8 o[2] = {addr, onoff}; + u8 i; + int rc; + + rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); + + if (rc < 0) + return rc; + if (i == 0x01) + return 0; + else { + deb_info("gpio_write failed.\n"); + return -EIO; + } +} + /* I2C */ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) @@ -262,6 +284,20 @@ static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) return rc; } +static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 b; + ret = cxusb_power_ctrl(d, onoff); + if (!onoff) + return ret; + + msleep(128); + cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); + msleep(100); + return ret; +} + static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { u8 buf[2] = { 0x03, 0x00 }; @@ -283,6 +319,67 @@ static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return 0; } +static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) +{ + int ep = d->props.generic_bulk_ctrl_endpoint; + const int timeout = 100; + const int junk_len = 32; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, ep), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) +{ + struct usb_data_stream_properties *p = &d->props.adapter[0].stream; + const int timeout = 100; + const int junk_len = p->u.bulk.buffersize; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, p->endpoint), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static int cxusb_d680_dmb_streaming_ctrl( + struct dvb_usb_adapter *adap, int onoff) +{ + if (onoff) { + u8 buf[2] = { 0x03, 0x00 }; + cxusb_d680_dmb_drain_video(adap->dev); + return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, + buf, sizeof(buf), NULL, 0); + } else { + int ret = cxusb_ctrl_msg(adap->dev, + CMD_STREAMING_OFF, NULL, 0, NULL, 0); + return ret; + } +} + static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct dvb_usb_rc_key *keymap = d->props.rc_key_map; @@ -335,6 +432,32 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event, return 0; } +static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) + return 0; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + + return 0; + } + } + + return 0; +} + static struct dvb_usb_rc_key dvico_mce_rc_keys[] = { { 0xfe, 0x02, KEY_TV }, { 0xfe, 0x0e, KEY_MP3 }, @@ -422,6 +545,44 @@ static struct dvb_usb_rc_key dvico_portable_rc_keys[] = { { 0xfc, 0x00, KEY_UNKNOWN }, /* HD */ }; +static struct dvb_usb_rc_key d680_dmb_rc_keys[] = { + { 0x00, 0x38, KEY_UNKNOWN }, /* TV/AV */ + { 0x08, 0x0c, KEY_ZOOM }, + { 0x08, 0x00, KEY_0 }, + { 0x00, 0x01, KEY_1 }, + { 0x08, 0x02, KEY_2 }, + { 0x00, 0x03, KEY_3 }, + { 0x08, 0x04, KEY_4 }, + { 0x00, 0x05, KEY_5 }, + { 0x08, 0x06, KEY_6 }, + { 0x00, 0x07, KEY_7 }, + { 0x08, 0x08, KEY_8 }, + { 0x00, 0x09, KEY_9 }, + { 0x00, 0x0a, KEY_MUTE }, + { 0x08, 0x29, KEY_BACK }, + { 0x00, 0x12, KEY_CHANNELUP }, + { 0x08, 0x13, KEY_CHANNELDOWN }, + { 0x00, 0x2b, KEY_VOLUMEUP }, + { 0x08, 0x2c, KEY_VOLUMEDOWN }, + { 0x00, 0x20, KEY_UP }, + { 0x08, 0x21, KEY_DOWN }, + { 0x00, 0x11, KEY_LEFT }, + { 0x08, 0x10, KEY_RIGHT }, + { 0x00, 0x0d, KEY_OK }, + { 0x08, 0x1f, KEY_RECORD }, + { 0x00, 0x17, KEY_PLAYPAUSE }, + { 0x08, 0x16, KEY_PLAYPAUSE }, + { 0x00, 0x0b, KEY_STOP }, + { 0x08, 0x27, KEY_FASTFORWARD }, + { 0x00, 0x26, KEY_REWIND }, + { 0x08, 0x1e, KEY_UNKNOWN }, /* Time Shift */ + { 0x00, 0x0e, KEY_UNKNOWN }, /* Snapshot */ + { 0x08, 0x2d, KEY_UNKNOWN }, /* Mouse Cursor */ + { 0x00, 0x0f, KEY_UNKNOWN }, /* Minimize/Maximize */ + { 0x08, 0x14, KEY_UNKNOWN }, /* Shuffle */ + { 0x00, 0x25, KEY_POWER }, +}; + static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) { static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; @@ -527,6 +688,24 @@ static struct mxl5005s_config aver_a868r_tuner = { .AgcMasterByte = 0x00, }; +/* FIXME: needs tweaking */ +static struct mxl5005s_config d680_dmb_tuner = { + .i2c_address = 0x63, + .if_freq = 36125000UL, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + /* Callbacks for DVB USB */ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) { @@ -563,7 +742,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) return 0; } -static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) +static int dvico_bluebird_xc2028_callback(void *ptr, int component, + int command, int arg) { struct dvb_usb_adapter *adap = ptr; struct dvb_usb_device *d = adap->dev; @@ -591,14 +771,16 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) struct xc2028_config cfg = { .i2c_adap = &adap->dev->i2c_adap, .i2c_addr = 0x61, - .callback = dvico_bluebird_xc2028_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .demod = XC3028_FE_ZARLINK456, }; + /* FIXME: generalize & move to common area */ + adap->fe->callback = dvico_bluebird_xc2028_callback; + fe = dvb_attach(xc2028_attach, adap->fe, &cfg); if (fe == NULL || fe->ops.tuner_ops.set_config == NULL) return -EIO; @@ -615,6 +797,14 @@ static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + fe = dvb_attach(mxl5005s_attach, adap->fe, + &adap->dev->i2c_adap, &d680_dmb_tuner); + return (fe == NULL) ? -EIO : 0; +} + static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) { u8 b; @@ -726,6 +916,159 @@ no_IR: return 0; } +static struct dibx000_agc_config dib7070_agc_config = { + .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + + /* + * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 + */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + .inv_gain = 600, + .time_stabiliz = 10, + .alpha_level = 0, + .thlock = 118, + .wbd_inv = 0, + .wbd_ref = 3530, + .wbd_sel = 1, + .wbd_alpha = 5, + .agc1_max = 65535, + .agc1_min = 0, + .agc2_max = 65535, + .agc2_min = 0, + .agc1_pt1 = 0, + .agc1_pt2 = 40, + .agc1_pt3 = 183, + .agc1_slope1 = 206, + .agc1_slope2 = 255, + .agc2_pt1 = 72, + .agc2_pt2 = 152, + .agc2_slope1 = 88, + .agc2_slope2 = 90, + .alpha_mant = 17, + .alpha_exp = 27, + .beta_mant = 23, + .beta_exp = 51, + .perform_agc_softsplit = 0, +}; + +static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { + .internal = 60000, + .sampling = 15000, + .pll_prediv = 1, + .pll_ratio = 20, + .pll_range = 3, + .pll_reset = 1, + .pll_bypass = 0, + .enable_refdiv = 0, + .bypclk_div = 0, + .IO_CLK_en_core = 1, + .ADClkSrc = 1, + .modulo = 2, + /* refsel, sel, freq_15k */ + .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), + .ifreq = (0 << 25) | 0, + .timf = 20452225, + .xtal_hz = 12000000, +}; + +static struct dib7000p_config cxusb_dualdig4_rev2_config = { + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = 0xfcef, + .gpio_val = 0x0110, + + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, +}; + +static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 1) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); + + dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &cxusb_dualdig4_rev2_config); + + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &cxusb_dualdig4_rev2_config); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + +static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib7000p_set_gpio(fe, 8, 0, !onoff); +} + +static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return 0; +} + +static struct dib0070_config dib7070p_dib0070_config = { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, +}; + +struct dib0700_adapter_state { + int (*set_param_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); +}; + +static int dib7070_set_param_override(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); + switch (band) { + case BAND_VHF: offset = 950; break; + default: + case BAND_UHF: offset = 550; break; + } + + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + + return state->set_param_save(fe, fep); +} + +static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = + dib7000p_get_i2c_master(adap->fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, + &dib7070p_dib0070_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe->ops.tuner_ops.set_params; + adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override; + return 0; +} + static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) { if (usb_set_interface(adap->dev->udev, 0, 1) < 0) @@ -751,6 +1094,54 @@ static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) return -EIO; } +static struct lgs8gl5_config lgs8gl5_cfg = { + .demod_address = 0x19, +}; + +static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + int n; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint)); + + /* Drain USB pipes to avoid hang after reboot */ + for (n = 0; n < 5; n++) { + cxusb_d680_dmb_drain_message(d); + cxusb_d680_dmb_drain_video(d); + msleep(200); + } + + /* Reset the tuner */ + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { + err("clear tuner gpio failed"); + return -EIO; + } + msleep(100); + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { + err("set tuner gpio failed"); + return -EIO; + } + msleep(100); + + /* Attach frontend */ + adap->fe = dvb_attach(lgs8gl5_attach, &lgs8gl5_cfg, &d->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + /* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -826,9 +1217,11 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties; static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties; static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; static struct dvb_usb_device_properties cxusb_aver_a868r_properties; +static struct dvb_usb_device_properties cxusb_d680_dmb_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -852,6 +1245,11 @@ static int cxusb_probe(struct usb_interface *intf, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_dualdig4_rev2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, + THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -876,6 +1274,8 @@ static struct usb_device_id cxusb_table [] = { { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) }, { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, + { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1321,6 +1721,104 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { } }; +static +struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, + .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, + .size_of_priv = sizeof(struct dib0700_adapter_state), + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }, + }, + + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc_interval = 100, + .rc_key_map = dvico_mce_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dvico_mce_rc_keys), + .rc_query = cxusb_rc_query, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)", + { NULL }, + { &cxusb_table[17], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, + .frontend_attach = cxusb_d680_dmb_frontend_attach, + .tuner_attach = cxusb_d680_dmb_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc_interval = 100, + .rc_key_map = d680_dmb_rc_keys, + .rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys), + .rc_query = cxusb_d680_dmb_rc_query, + + .num_device_descs = 1, + .devices = { + { + "Conexant DMB-TH Stick", + { NULL }, + { &cxusb_table[18], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 66d4dc6ba46..739193943c1 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -31,6 +31,8 @@ extern int dvb_usb_dib0700_debug; // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " ) #define REQUEST_SET_RC 0x11 +#define REQUEST_NEW_I2C_READ 0x12 +#define REQUEST_NEW_I2C_WRITE 0x13 #define REQUEST_GET_VERSION 0x15 struct dib0700_state { @@ -39,6 +41,8 @@ struct dib0700_state { u8 rc_toggle; u8 rc_counter; u8 is_dib7000pc; + u8 fw_use_new_i2c_api; + u8 disable_streaming_master_mode; }; extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 595a04696c8..dd53cee3896 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -82,9 +82,98 @@ int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_ } /* - * I2C master xfer function + * I2C master xfer function (supported in 1.20 firmware) */ -static int dib0700_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num) +static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + /* The new i2c firmware messages are more reliable and in particular + properly support i2c read calls not preceded by a write */ + + struct dvb_usb_device *d = i2c_get_adapdata(adap); + uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */ + uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */ + uint8_t en_start = 0; + uint8_t en_stop = 0; + uint8_t buf[255]; /* TBV: malloc ? */ + int result, i; + + /* Ensure nobody else hits the i2c bus while we're sending our + sequence of messages, (such as the remote control thread) */ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if (i == 0) { + /* First message in the transaction */ + en_start = 1; + } else if (!(msg[i].flags & I2C_M_NOSTART)) { + /* Device supports repeated-start */ + en_start = 1; + } else { + /* Not the first packet and device doesn't support + repeated start */ + en_start = 0; + } + if (i == (num - 1)) { + /* Last message in the transaction */ + en_stop = 1; + } + + if (msg[i].flags & I2C_M_RD) { + /* Read request */ + u16 index, value; + uint8_t i2c_dest; + + i2c_dest = (msg[i].addr << 1); + value = ((en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F)) << 8 | i2c_dest; + /* I2C ctrl + FE bus; */ + index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + + result = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_READ, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, msg[i].buf, + msg[i].len, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + err("i2c read error (status = %d)\n", result); + break; + } + } else { + /* Write request */ + buf[0] = REQUEST_NEW_I2C_WRITE; + buf[1] = (msg[i].addr << 1); + buf[2] = (en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F); + /* I2C ctrl + FE bus; */ + buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + /* The Actual i2c payload */ + memcpy(&buf[4], msg[i].buf, msg[i].len); + + result = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_WRITE, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, buf, msg[i].len + 4, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + err("i2c write error (status = %d)\n", result); + break; + } + } + } + mutex_unlock(&d->i2c_mutex); + return i; +} + +/* + * I2C master xfer function (pre-1.20 firmware) + */ +static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, + struct i2c_msg *msg, int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i,len; @@ -124,6 +213,21 @@ static int dib0700_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num return i; } +static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dib0700_state *st = d->priv; + + if (st->fw_use_new_i2c_api == 1) { + /* User running at least fw 1.20 */ + return dib0700_i2c_xfer_new(adap, msg, num); + } else { + /* Use legacy calls */ + return dib0700_i2c_xfer_legacy(adap, msg, num); + } +} + static u32 dib0700_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; @@ -246,7 +350,12 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) b[0] = REQUEST_ENABLE_VIDEO; b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */ - b[2] = (0x01 << 4); /* Master mode */ + + if (st->disable_streaming_master_mode == 1) + b[2] = 0x00; + else + b[2] = (0x01 << 4); /* Master mode */ + b[3] = 0x00; deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id); diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 6c0e5c5f436..0cfccc24b19 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -14,6 +14,8 @@ #include "mt2060.h" #include "mt2266.h" #include "tuner-xc2028.h" +#include "xc5000.h" +#include "s5h1411.h" #include "dib0070.h" static int force_lna_activation; @@ -366,7 +368,8 @@ static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, }; -static int stk7700ph_xc3028_callback(void *ptr, int command, int arg) +static int stk7700ph_xc3028_callback(void *ptr, int component, + int command, int arg) { struct dvb_usb_adapter *adap = ptr; @@ -394,7 +397,6 @@ static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { static struct xc2028_config stk7700ph_xc3028_config = { .i2c_addr = 0x61, - .callback = stk7700ph_xc3028_callback, .ctrl = &stk7700ph_xc3028_ctrl, }; @@ -435,7 +437,9 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) DIBX000_I2C_INTERFACE_TUNER, 1); stk7700ph_xc3028_config.i2c_adap = tun_i2c; - stk7700ph_xc3028_config.video_dev = adap; + + /* FIXME: generalize & move to common area */ + adap->fe->callback = stk7700ph_xc3028_callback; return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config) == NULL ? -ENODEV : 0; @@ -677,6 +681,43 @@ static struct dvb_usb_rc_key dib0700_rc_keys[] = { { 0x01, 0x7d, KEY_VOLUMEDOWN }, { 0x02, 0x42, KEY_CHANNELUP }, { 0x00, 0x7d, KEY_CHANNELDOWN }, + + /* Key codes for Nova-TD "credit card" remote control. */ + { 0x1d, 0x00, KEY_0 }, + { 0x1d, 0x01, KEY_1 }, + { 0x1d, 0x02, KEY_2 }, + { 0x1d, 0x03, KEY_3 }, + { 0x1d, 0x04, KEY_4 }, + { 0x1d, 0x05, KEY_5 }, + { 0x1d, 0x06, KEY_6 }, + { 0x1d, 0x07, KEY_7 }, + { 0x1d, 0x08, KEY_8 }, + { 0x1d, 0x09, KEY_9 }, + { 0x1d, 0x0a, KEY_TEXT }, + { 0x1d, 0x0d, KEY_MENU }, + { 0x1d, 0x0f, KEY_MUTE }, + { 0x1d, 0x10, KEY_VOLUMEUP }, + { 0x1d, 0x11, KEY_VOLUMEDOWN }, + { 0x1d, 0x12, KEY_CHANNEL }, + { 0x1d, 0x14, KEY_UP }, + { 0x1d, 0x15, KEY_DOWN }, + { 0x1d, 0x16, KEY_LEFT }, + { 0x1d, 0x17, KEY_RIGHT }, + { 0x1d, 0x1c, KEY_TV }, + { 0x1d, 0x1e, KEY_NEXT }, + { 0x1d, 0x1f, KEY_BACK }, + { 0x1d, 0x20, KEY_CHANNELUP }, + { 0x1d, 0x21, KEY_CHANNELDOWN }, + { 0x1d, 0x24, KEY_LAST }, + { 0x1d, 0x25, KEY_OK }, + { 0x1d, 0x30, KEY_PAUSE }, + { 0x1d, 0x32, KEY_REWIND }, + { 0x1d, 0x34, KEY_FASTFORWARD }, + { 0x1d, 0x35, KEY_PLAY }, + { 0x1d, 0x36, KEY_STOP }, + { 0x1d, 0x37, KEY_RECORD }, + { 0x1d, 0x3b, KEY_GOTO }, + { 0x1d, 0x3d, KEY_POWER }, }; /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ @@ -1078,6 +1119,97 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } +/* S5H1411 */ +static struct s5h1411_config pinnacle_801e_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +/* Pinnacle PCTV HD Pro 801e GPIOs map: + GPIO0 - currently unknown + GPIO1 - xc5000 tuner reset + GPIO2 - CX25843 sleep + GPIO3 - currently unknown + GPIO4 - currently unknown + GPIO6 - currently unknown + GPIO7 - currently unknown + GPIO9 - currently unknown + GPIO10 - CX25843 reset + */ +static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + /* The s5h1411 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + /* All msleep values taken from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(400); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(60); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); + msleep(30); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* GPIOs are initialized, do the attach */ + adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, + &adap->dev->i2c_adap); + return adap->fe == NULL ? -ENODEV : 0; +} + +static int dib0700_xc5000_tuner_callback(void *priv, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + if (command == XC5000_TUNER_RESET) { + /* Reset the tuner */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); + msleep(330); /* from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); + msleep(330); /* from Windows USB trace */ + } else { + err("xc5000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } + + return 0; +} + +static struct xc5000_config s5h1411_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) +{ + /* FIXME: generalize & move to common area */ + adap->fe->callback = dib0700_xc5000_tuner_callback; + + return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, + &s5h1411_xc5000_tunerconfig) + == NULL ? -ENODEV : 0; +} + /* DVB-USB and USB stuff follows */ struct usb_device_id dib0700_usb_id_table[] = { /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, @@ -1119,6 +1251,11 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, +/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1126,7 +1263,7 @@ MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ .usb_ctrl = DEVICE_SPECIFIC, \ - .firmware = "dvb-usb-dib0700-1.10.fw", \ + .firmware = "dvb-usb-dib0700-1.20.fw", \ .download_firmware = dib0700_download_firmware, \ .no_reconnect = 1, \ .size_of_priv = sizeof(struct dib0700_state), \ @@ -1293,7 +1430,12 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[31], NULL }, { NULL }, } - } + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, @@ -1408,7 +1550,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 3, + .num_device_descs = 5, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[27], NULL }, @@ -1422,6 +1564,47 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[32], NULL }, { NULL }, }, + { "Gigabyte U8000-RH", + { &dib0700_usb_id_table[37], NULL }, + { NULL }, + }, + { "YUAN High-Tech STK7700PH", + { &dib0700_usb_id_table[38], NULL }, + { NULL }, + }, + { "Asus My Cinema-U3000Hybrid", + { &dib0700_usb_id_table[39], NULL }, + { NULL }, + }, + }, + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .frontend_attach = s5h1411_frontend_attach, + .tuner_attach = xc5000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Pinnacle PCTV HD Pro USB Stick", + { &dib0700_usb_id_table[40], NULL }, + { NULL }, + }, + { "Pinnacle PCTV HD USB Stick", + { &dib0700_usb_id_table[41], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c new file mode 100644 index 00000000000..078ce92ca43 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtv5100.c @@ -0,0 +1,240 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> + * http://royale.zerezo.com/dtv5100/ + * + * Inspired by gl861.c and au6610.c drivers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "dtv5100.h" +#include "zl10353.h" +#include "qt1010.h" + +/* debug */ +static int dvb_usb_dtv5100_debug; +module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u8 request; + u8 type; + u16 value; + u16 index; + + switch (wlen) { + case 1: + /* write { reg }, read { value } */ + request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : + DTV5100_TUNER_READ); + type = USB_TYPE_VENDOR | USB_DIR_IN; + value = 0; + break; + case 2: + /* write { reg, value } */ + request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : + DTV5100_TUNER_WRITE); + type = USB_TYPE_VENDOR | USB_DIR_OUT; + value = wbuf[1]; + break; + default: + warn("wlen = %x, aborting.", wlen); + return -EINVAL; + } + index = (addr << 8) + wbuf[0]; + + msleep(1); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, + type, value, index, rbuf, rlen, + DTV5100_USB_TIMEOUT); +} + +/* I2C */ +static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, msg[i+1].buf, + msg[i+1].len) < 0) + break; + i++; + } else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 dtv5100_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dtv5100_i2c_algo = { + .master_xfer = dtv5100_i2c_xfer, + .functionality = dtv5100_i2c_func, +}; + +/* Callbacks for DVB USB */ +static struct zl10353_config dtv5100_zl10353_config = { + .demod_address = DTV5100_DEMOD_ADDR, + .no_tuner = 1, + .parallel_ts = 1, +}; + +static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + /* disable i2c gate, or it won't work... is this safe? */ + adap->fe->ops.i2c_gate_ctrl = NULL; + + return 0; +} + +static struct qt1010_config dtv5100_qt1010_config = { + .i2c_address = DTV5100_TUNER_ADDR +}; + +static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(qt1010_attach, + adap->fe, &adap->dev->i2c_adap, + &dtv5100_qt1010_config) == NULL ? -ENODEV : 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties dtv5100_properties; + +static int dtv5100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int i, ret; + struct usb_device *udev = interface_to_usbdev(intf); + + /* initialize non qt1010/zl10353 part? */ + for (i = 0; dtv5100_init[i].request; i++) { + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + dtv5100_init[i].request, + USB_TYPE_VENDOR | USB_DIR_OUT, + dtv5100_init[i].value, + dtv5100_init[i].index, NULL, 0, + DTV5100_USB_TIMEOUT); + if (ret) + return ret; + } + + ret = dvb_usb_device_init(intf, &dtv5100_properties, + THIS_MODULE, NULL, adapter_nr); + if (ret) + return ret; + + return 0; +} + +static struct usb_device_id dtv5100_table[] = { + { USB_DEVICE(0x06be, 0xa232) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, dtv5100_table); + +static struct dvb_usb_device_properties dtv5100_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = {{ + .frontend_attach = dtv5100_frontend_attach, + .tuner_attach = dtv5100_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } }, + + .i2c_algo = &dtv5100_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "AME DTV-5100 USB2.0 DVB-T", + .cold_ids = { NULL }, + .warm_ids = { &dtv5100_table[0], NULL }, + }, + } +}; + +static struct usb_driver dtv5100_driver = { + .name = "dvb_usb_dtv5100", + .probe = dtv5100_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dtv5100_table, +}; + +/* module stuff */ +static int __init dtv5100_module_init(void) +{ + int ret; + + ret = usb_register(&dtv5100_driver); + if (ret) + err("usb_register failed. Error number %d", ret); + + return ret; +} + +static void __exit dtv5100_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dtv5100_driver); +} + +module_init(dtv5100_module_init); +module_exit(dtv5100_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/dvb/dvb-usb/dtv5100.h new file mode 100644 index 00000000000..93e96e04a82 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtv5100.h @@ -0,0 +1,51 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> + * http://royale.zerezo.com/dtv5100/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _DVB_USB_DTV5100_H_ +#define _DVB_USB_DTV5100_H_ + +#define DVB_USB_LOG_PREFIX "dtv5100" +#include "dvb-usb.h" + +#define DTV5100_USB_TIMEOUT 500 + +#define DTV5100_DEMOD_ADDR 0x00 +#define DTV5100_DEMOD_WRITE 0xc0 +#define DTV5100_DEMOD_READ 0xc1 + +#define DTV5100_TUNER_ADDR 0xc4 +#define DTV5100_TUNER_WRITE 0xc7 +#define DTV5100_TUNER_READ 0xc8 + +#define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" +#define DRIVER_DESC "AME DTV-5100 USB2.0 DVB-T" + +static struct { + u8 request; + u8 value; + u16 index; +} dtv5100_init[] = { + { 0x000000c5, 0x00000000, 0x00000001 }, + { 0x000000c5, 0x00000001, 0x00000001 }, + { } /* Terminating entry */ +}; + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 03dfb9f2fe3..7380b94b3b3 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -22,6 +22,7 @@ #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b #define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CONEXANT 0x0572 #define USB_VID_CYPRESS 0x04b4 #define USB_VID_DIBCOM 0x10b8 #define USB_VID_DPOSH 0x1498 @@ -33,16 +34,19 @@ #define USB_VID_HAUPPAUGE 0x2040 #define USB_VID_HYPER_PALTEK 0x1025 #define USB_VID_KWORLD 0xeb2a +#define USB_VID_KWORLD_2 0x1b80 #define USB_VID_KYE 0x0458 #define USB_VID_LEADTEK 0x0413 #define USB_VID_LITEON 0x04ca #define USB_VID_MEDION 0x1660 #define USB_VID_MIGLIA 0x18f3 #define USB_VID_MSI 0x0db0 +#define USB_VID_MSI_2 0x1462 #define USB_VID_OPERA1 0x695c #define USB_VID_PINNACLE 0x2304 #define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd +#define USB_VID_TELESTAR 0x10b9 #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 @@ -50,15 +54,18 @@ #define USB_VID_WIDEVIEW 0x14aa #define USB_VID_GIGABYTE 0x1044 #define USB_VID_YUAN 0x1164 - +#define USB_VID_XTENSIONS 0x1ae7 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 #define USB_PID_ADSTECH_USB2_WARM 0xa334 #define USB_PID_AFATECH_AF9005 0x9020 +#define USB_PID_AFATECH_AF9015_9015 0x9015 +#define USB_PID_AFATECH_AF9015_9016 0x9016 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_ANYSEE 0x861f +#define USB_PID_AZUREWAVE_AD_TU700 0x3237 #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 @@ -69,6 +76,7 @@ #define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d #define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78 #define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80 +#define USB_PID_CONEXANT_D680_DMB 0x86d6 #define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 #define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 @@ -87,9 +95,12 @@ #define USB_PID_UNIWILL_STK7700P 0x6003 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 #define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_KWORLD_399U 0xe399 +#define USB_PID_KWORLD_PC160_2T 0xc160 #define USB_PID_KWORLD_VSTREAM_COLD 0x17de #define USB_PID_KWORLD_VSTREAM_WARM 0x17df #define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 #define USB_PID_TWINHAN_VP7041_COLD 0x3201 #define USB_PID_TWINHAN_VP7041_WARM 0x3202 #define USB_PID_TWINHAN_VP7020_COLD 0x3203 @@ -98,6 +109,7 @@ #define USB_PID_TWINHAN_VP7045_WARM 0x3206 #define USB_PID_TWINHAN_VP7021_COLD 0x3207 #define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_TINYTWIN 0x3226 #define USB_PID_DNTV_TINYUSB2_COLD 0x3223 #define USB_PID_DNTV_TINYUSB2_WARM 0x3224 #define USB_PID_ULTIMA_TVBOX_COLD 0x8105 @@ -144,6 +156,9 @@ #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 +#define USB_PID_AVERMEDIA_VOLAR_X 0xa815 +#define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 +#define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 @@ -153,8 +168,11 @@ #define USB_PID_PINNACLE_PCTV2000E 0x022c #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 #define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV71E 0x022b #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV801E 0x023a +#define USB_PID_PINNACLE_PCTV801E_SE 0x023b #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 @@ -171,6 +189,7 @@ #define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59 #define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2 0xdb98 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71 #define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54 @@ -190,6 +209,7 @@ #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 +#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 #define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 #define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 #define USB_PID_GENPIX_8PSK_REV_2 0x0202 @@ -197,14 +217,21 @@ #define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 #define USB_PID_SIGMATEK_DVB_110 0x6610 #define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_MSI_DIGIVOX_DUO 0x8801 #define USB_PID_OPERA1_COLD 0x2830 #define USB_PID_OPERA1_WARM 0x3829 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 #define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_GIGABYTE_U8000 0x7002 #define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3000H 0x1736 #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc +#define USB_PID_YUAN_STK7700PH 0x1f08 #define USB_PID_DW2102 0x2102 +#define USB_PID_XTENSIONS_XD_380 0x0381 +#define USB_PID_TELESTAR_STARSTICK_2 0x8000 +#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807 #endif diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index a4d898b44e5..6286fbbe7fb 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -1,4 +1,5 @@ -/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card +/* DVB USB framework compliant Linux driver for the +* DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card * * Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) * @@ -10,62 +11,74 @@ */ #include <linux/version.h> #include "dw2102.h" +#include "si21xx.h" #include "stv0299.h" #include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" +#include "eds1547.h" +#include "cx24116.h" #ifndef USB_PID_DW2102 #define USB_PID_DW2102 0x2102 #endif -#define DW2102_READ_MSG 0 -#define DW2102_WRITE_MSG 1 +#ifndef USB_PID_DW2104 +#define USB_PID_DW2104 0x2104 +#endif + +#define DW210X_READ_MSG 0 +#define DW210X_WRITE_MSG 1 #define REG_1F_SYMBOLRATE_BYTE0 0x1f #define REG_20_SYMBOLRATE_BYTE1 0x20 #define REG_21_SYMBOLRATE_BYTE2 0x21 - +/* on my own*/ #define DW2102_VOLTAGE_CTRL (0x1800) #define DW2102_RC_QUERY (0x1a00) -struct dw2102_state { +struct dw210x_state { u32 last_key_pressed; }; -struct dw2102_rc_keys { +struct dw210x_rc_keys { u32 keycode; u32 event; }; +/* debug */ +static int dvb_usb_dw2102_debug; +module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS); + DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value, - u8 *data, u16 len, int flags) +static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, + u16 index, u8 * data, u16 len, int flags) { int ret; u8 u8buf[len]; - unsigned int pipe = (flags == DW2102_READ_MSG) ? - usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); - u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; + unsigned int pipe = (flags == DW210X_READ_MSG) ? + usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); + u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; - if (flags == DW2102_WRITE_MSG) + if (flags == DW210X_WRITE_MSG) memcpy(u8buf, data, len); - ret = usb_control_msg(dev, pipe, request, - request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000); + ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, + value, index , u8buf, len, 2000); - if (flags == DW2102_READ_MSG) + if (flags == DW210X_READ_MSG) memcpy(data, u8buf, len); return ret; } /* I2C */ - static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i = 0, ret = 0; u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; - u8 request; u16 value; if (!d) @@ -76,14 +89,12 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); switch (num) { case 2: /* read stv0299 register */ - request = 0xb5; value = msg[0].buf[0];/* register */ for (i = 0; i < msg[1].len; i++) { value = value + i; - ret = dw2102_op_rw(d->udev, 0xb5, - value, buf6, 2, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xb5, value, 0, + buf6, 2, DW210X_READ_MSG); msg[1].buf[i] = buf6[0]; - } break; case 1: @@ -93,8 +104,8 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); buf6[0] = 0x2a; buf6[1] = msg[0].buf[0]; buf6[2] = msg[0].buf[1]; - ret = dw2102_op_rw(d->udev, 0xb2, - 0, buf6, 3, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 3, DW210X_WRITE_MSG); break; case 0x60: if (msg[0].flags == 0) { @@ -106,28 +117,156 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); buf6[4] = msg[0].buf[1]; buf6[5] = msg[0].buf[2]; buf6[6] = msg[0].buf[3]; - ret = dw2102_op_rw(d->udev, 0xb2, - 0, buf6, 7, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 7, DW210X_WRITE_MSG); } else { - /* write to tuner pll */ - ret = dw2102_op_rw(d->udev, 0xb5, - 0, buf6, 1, DW2102_READ_MSG); + /* read from tuner */ + ret = dw210x_op_rw(d->udev, 0xb5, 0, 0, + buf6, 1, DW210X_READ_MSG); msg[0].buf[0] = buf6[0]; } break; case (DW2102_RC_QUERY): - ret = dw2102_op_rw(d->udev, 0xb8, - 0, buf6, 2, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW210X_READ_MSG); msg[0].buf[0] = buf6[0]; msg[0].buf[1] = buf6[1]; break; case (DW2102_VOLTAGE_CTRL): buf6[0] = 0x30; buf6[1] = msg[0].buf[0]; - ret = dw2102_op_rw(d->udev, 0xb2, - 0, buf6, 2, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW210X_WRITE_MSG); + break; + } + + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, + struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0; + u8 buf6[] = {0, 0, 0, 0, 0, 0, 0}; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: + /* read si2109 register by number */ + buf6[0] = 0xd0; + buf6[1] = msg[0].len; + buf6[2] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + buf6, msg[0].len + 2, DW210X_WRITE_MSG); + /* read si2109 register */ + ret = dw210x_op_rw(d->udev, 0xc3, 0xd0, 0, + buf6, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, buf6 + 2, msg[1].len); + + break; + case 1: + switch (msg[0].addr) { + case 0x68: + /* write to si2109 register */ + buf6[0] = 0xd0; + buf6[1] = msg[0].len; + memcpy(buf6 + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6, + msg[0].len + 2, DW210X_WRITE_MSG); + break; + case(DW2102_RC_QUERY): + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW210X_READ_MSG); + msg[0].buf[0] = buf6[0]; + msg[0].buf[1] = buf6[1]; + break; + case(DW2102_VOLTAGE_CTRL): + buf6[0] = 0x30; + buf6[1] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW210X_WRITE_MSG); + break; + } + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} +static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf [msg[1].len + 2], obuf[3]; + obuf[0] = 0xd0; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + /* second read registers */ + ret = dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x68: { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = 0xd0; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case 0x61: { + /* write to tuner */ + u8 obuf[msg[0].len + 2]; + obuf[0] = 0xc2; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); break; } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + case(DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + obuf[0] = 0x30; + obuf[1] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + } break; } @@ -136,17 +275,137 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); return num; } -static u32 dw2102_i2c_func(struct i2c_adapter *adapter) +static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0; + int len, i; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf [msg[1].len + 2], obuf[3]; + obuf[0] = 0xaa; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + /* second read registers */ + ret = dw210x_op_rw(d->udev, 0xc3, 0xab , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x55: { + if (msg[0].buf[0] == 0xf7) { + /* firmware */ + /* Write in small blocks */ + u8 obuf[19]; + obuf[0] = 0xaa; + obuf[1] = 0x11; + obuf[2] = 0xf7; + len = msg[0].len - 1; + i = 1; + do { + memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len)); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, (len > 16 ? 16 : len) + 3, DW210X_WRITE_MSG); + i += 16; + len -= 16; + } while (len > 0); + } else { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = 0xaa; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + } + break; + } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + case(DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + obuf[0] = 0x30; + obuf[1] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + } + + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static u32 dw210x_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; } static struct i2c_algorithm dw2102_i2c_algo = { .master_xfer = dw2102_i2c_transfer, - .functionality = dw2102_i2c_func, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw2102_serit_i2c_algo = { + .master_xfer = dw2102_serit_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw2102_earda_i2c_algo = { + .master_xfer = dw2102_earda_i2c_transfer, + .functionality = dw210x_i2c_func, }; -static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +static struct i2c_algorithm dw2104_i2c_algo = { + .master_xfer = dw2104_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 ibuf[] = {0, 0}; + u8 eeprom[256], eepromline[16]; + + for (i = 0; i < 256; i++) { + if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) { + err("read eeprom failed."); + return -1; + } else { + eepromline[i%16] = ibuf[0]; + eeprom[i] = ibuf[0]; + } + if ((i % 16) == 15) { + deb_xfer("%02x: ", i - 15); + debug_dump(eepromline, 16, deb_xfer); + } + } + memcpy(mac, eeprom + 8, 6); + return 0; +}; + +static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { static u8 command_13v[1] = {0x00}; static u8 command_18v[1] = {0x01}; @@ -163,18 +422,78 @@ static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) return 0; } -static int dw2102_frontend_attach(struct dvb_usb_adapter *d) +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + +static struct cx24116_config dw2104_config = { + .demod_address = 0x55, + .mpg_clk_pos_pol = 0x01, +}; + +static struct si21xx_config serit_sp1511lhb_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + +}; + +static int dw2104_frontend_attach(struct dvb_usb_adapter *d) { - d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, - &d->dev->i2c_adap); - if (d->fe != NULL) { - d->fe->ops.set_voltage = dw2102_set_voltage; - info("Attached stv0299!\n"); + if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config, + &d->dev->i2c_adap)) != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached cx24116!\n"); return 0; } return -EIO; } +static struct dvb_usb_device_properties dw2102_properties; + +static int dw2102_frontend_attach(struct dvb_usb_adapter *d) +{ + if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = NULL;*/ + d->fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config, + &d->dev->i2c_adap); + if (d->fe != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached si21xx!\n"); + return 0; + } + } + if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ + d->fe = dvb_attach(stv0288_attach, &earda_config, + &d->dev->i2c_adap); + if (d->fe != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached stv0288!\n"); + return 0; + } + } + + if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ + d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, + &d->dev->i2c_adap); + if (d->fe != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached stv0299!\n"); + return 0; + } + } + return -EIO; +} + static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) { dvb_attach(dvb_pll_attach, adap->fe, 0x60, @@ -182,7 +501,15 @@ static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) return 0; } -static struct dvb_usb_rc_key dw2102_rc_keys[] = { +static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(stb6000_attach, adap->fe, 0x61, + &adap->dev->i2c_adap); + + return 0; +} + +static struct dvb_usb_rc_key dw210x_rc_keys[] = { { 0xf8, 0x0a, KEY_Q }, /*power*/ { 0xf8, 0x0c, KEY_M }, /*mute*/ { 0xf8, 0x11, KEY_1 }, @@ -221,7 +548,7 @@ static struct dvb_usb_rc_key dw2102_rc_keys[] = { static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - struct dw2102_state *st = d->priv; + struct dw210x_state *st = d->priv; u8 key[2]; struct i2c_msg msg[] = { {.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key, @@ -231,12 +558,12 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *state = REMOTE_NO_KEY_PRESSED; if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) { - for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) { - if (dw2102_rc_keys[i].data == msg[0].buf[0]) { + for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) { + if (dw210x_rc_keys[i].data == msg[0].buf[0]) { *state = REMOTE_KEY_PRESSED; - *event = dw2102_rc_keys[i].event; + *event = dw210x_rc_keys[i].event; st->last_key_pressed = - dw2102_rc_keys[i].event; + dw210x_rc_keys[i].event; break; } st->last_key_pressed = 0; @@ -249,6 +576,8 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) static struct usb_device_id dw2102_table[] = { {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, + {USB_DEVICE(USB_VID_CYPRESS, 0x2104)}, + {USB_DEVICE(0x9022, 0xd650)}, { } }; @@ -260,7 +589,7 @@ static int dw2102_load_firmware(struct usb_device *dev, u8 *b, *p; int ret = 0, i; u8 reset; - u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0}; + u8 reset16[] = {0, 0, 0, 0, 0, 0, 0}; const struct firmware *fw; const char *filename = "dvb-usb-dw2101.fw"; switch (dev->descriptor.idProduct) { @@ -273,25 +602,23 @@ static int dw2102_load_firmware(struct usb_device *dev, return ret; } break; - case USB_PID_DW2102: + default: fw = frmwr; break; } - info("start downloading DW2102 firmware"); + info("start downloading DW210X firmware"); p = kmalloc(fw->size, GFP_KERNEL); reset = 1; /*stop the CPU*/ - dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG); - dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG); + dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG); if (p != NULL) { memcpy(p, fw->data, fw->size); for (i = 0; i < fw->size; i += 0x40) { b = (u8 *) p + i; - if (dw2102_op_rw - (dev, 0xa0, i, b , 0x40, - DW2102_WRITE_MSG) != 0x40 - ) { + if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40, + DW210X_WRITE_MSG) != 0x40) { err("error while transferring firmware"); ret = -EINVAL; break; @@ -299,43 +626,66 @@ static int dw2102_load_firmware(struct usb_device *dev, } /* restart the CPU */ reset = 0; - if (ret || dw2102_op_rw - (dev, 0xa0, 0x7f92, &reset, 1, - DW2102_WRITE_MSG) != 1) { + if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, + DW210X_WRITE_MSG) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } - if (ret || dw2102_op_rw - (dev, 0xa0, 0xe600, &reset, 1, - DW2102_WRITE_MSG) != 1) { + if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, + DW210X_WRITE_MSG) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } /* init registers */ switch (dev->descriptor.idProduct) { - case USB_PID_DW2102: - dw2102_op_rw - (dev, 0xbf, 0x0040, &reset, 0, - DW2102_WRITE_MSG); - dw2102_op_rw - (dev, 0xb9, 0x0000, &reset16[0], 2, - DW2102_READ_MSG); + case USB_PID_DW2104: + case 0xd650: + reset = 1; + dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, + DW210X_WRITE_MSG); + reset = 0; + dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW210X_WRITE_MSG); break; + case USB_PID_DW2102: + dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW210X_READ_MSG); + /* check STV0299 frontend */ + dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, + DW210X_READ_MSG); + if (reset16[0] == 0xa1) { + dw2102_properties.i2c_algo = &dw2102_i2c_algo; + dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach; + break; + } else { + /* check STV0288 frontend */ + reset16[0] = 0xd0; + reset16[1] = 1; + reset16[2] = 0; + dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3, + DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3, + DW210X_READ_MSG); + if (reset16[2] == 0x11) { + dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo; + dw2102_properties.adapter->tuner_attach = &dw2102_earda_tuner_attach; + break; + } + } case 0x2101: - dw2102_op_rw - (dev, 0xbc, 0x0030, &reset16[0], 2, - DW2102_READ_MSG); - dw2102_op_rw - (dev, 0xba, 0x0000, &reset16[0], 7, - DW2102_READ_MSG); - dw2102_op_rw - (dev, 0xba, 0x0000, &reset16[0], 7, - DW2102_READ_MSG); - dw2102_op_rw - (dev, 0xb9, 0x0000, &reset16[0], 2, - DW2102_READ_MSG); + dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW210X_READ_MSG); break; } + msleep(100); kfree(p); } return ret; @@ -345,12 +695,12 @@ static struct dvb_usb_device_properties dw2102_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .firmware = "dvb-usb-dw2102.fw", - .size_of_priv = sizeof(struct dw2102_state), + .size_of_priv = sizeof(struct dw210x_state), .no_reconnect = 1, - .i2c_algo = &dw2102_i2c_algo, - .rc_key_map = dw2102_rc_keys, - .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys), + .i2c_algo = &dw2102_serit_i2c_algo, + .rc_key_map = dw210x_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), .rc_interval = 150, .rc_query = dw2102_rc_query, @@ -358,11 +708,12 @@ static struct dvb_usb_device_properties dw2102_properties = { /* parameter for the MPEG2-data transfer */ .num_adapters = 1, .download_firmware = dw2102_load_firmware, - .adapter = { + .read_mac_address = dw210x_read_mac_address, + .adapter = { { .frontend_attach = dw2102_frontend_attach, .streaming_ctrl = NULL, - .tuner_attach = dw2102_tuner_attach, + .tuner_attach = NULL, .stream = { .type = USB_BULK, .count = 8, @@ -388,11 +739,64 @@ static struct dvb_usb_device_properties dw2102_properties = { } }; +static struct dvb_usb_device_properties dw2104_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dw2104.fw", + .size_of_priv = sizeof(struct dw210x_state), + .no_reconnect = 1, + + .i2c_algo = &dw2104_i2c_algo, + .rc_key_map = dw210x_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + + .generic_bulk_ctrl_endpoint = 0x81, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = dw210x_read_mac_address, + .adapter = { + { + .frontend_attach = dw2104_frontend_attach, + .streaming_ctrl = NULL, + /*.tuner_attach = dw2104_tuner_attach,*/ + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, + .num_device_descs = 2, + .devices = { + { "DVBWorld DW2104 USB2.0", + {&dw2102_table[2], NULL}, + {NULL}, + }, + { "TeVii S650 USB2.0", + {&dw2102_table[3], NULL}, + {NULL}, + }, + } +}; + static int dw2102_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &dw2102_properties, - THIS_MODULE, NULL, adapter_nr); + if (0 == dvb_usb_device_init(intf, &dw2102_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dw2104_properties, + THIS_MODULE, NULL, adapter_nr)) { + return 0; + } + return -ENODEV; } static struct usb_driver dw2102_driver = { @@ -420,6 +824,6 @@ module_init(dw2102_module_init); module_exit(dw2102_module_exit); MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); -MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device"); +MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h index 7a310f90683..e3370734e95 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.h +++ b/drivers/media/dvb/dvb-usb/dw2102.h @@ -4,6 +4,5 @@ #define DVB_USB_LOG_PREFIX "dw2102" #include "dvb-usb.h" -extern int dvb_usb_dw2102_debug; #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args) #endif diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 7dbb4a223c9..96b93e21a84 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -43,6 +43,20 @@ config DVB_S5H1420 help A DVB-S tuner module. Say Y when you want to support this frontend. +config DVB_STV0288 + tristate "ST STV0288 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STB6000 + tristate "ST STB6000 silicon tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + config DVB_STV0299 tristate "ST STV0299 based" depends on DVB_CORE && I2C @@ -92,6 +106,20 @@ config DVB_TUA6100 help A DVB-S PLL chip. +config DVB_CX24116 + tristate "Conexant CX24116 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_SI21XX + tristate "Silicon Labs SI21XX based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE @@ -385,4 +413,23 @@ config DVB_ISL6421 help An SEC control chip. +config DVB_LGS8GL5 + tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +comment "Tools to develop new frontends" + +config DVB_DUMMY_FE + tristate "Dummy frontend driver" + default n + +config DVB_AF9013 + tristate "Afatech AF9013 demodulator" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Say Y when you want to support this frontend. endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 028da55611c..aba79f4a63a 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -48,3 +48,10 @@ obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o obj-$(CONFIG_DVB_AU8522) += au8522.o obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o +obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o +obj-$(CONFIG_DVB_AF9013) += af9013.o +obj-$(CONFIG_DVB_CX24116) += cx24116.o +obj-$(CONFIG_DVB_SI21XX) += si21xx.o +obj-$(CONFIG_DVB_STV0288) += stv0288.o +obj-$(CONFIG_DVB_STB6000) += stb6000.o diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c new file mode 100644 index 00000000000..21c1060cf10 --- /dev/null +++ b/drivers/media/dvb/frontends/af9013.c @@ -0,0 +1,1685 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/firmware.h> + +#include "dvb_frontend.h" +#include "af9013_priv.h" +#include "af9013.h" + +int af9013_debug; + +struct af9013_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + + struct af9013_config config; + + u16 signal_strength; + u32 ber; + u32 ucblocks; + u16 snr; + u32 frequency; + unsigned long next_statistics_check; +}; + +static u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; + +static int af9013_write_regs(struct af9013_state *state, u8 mbox, u16 reg, + u8 *val, u8 len) +{ + u8 buf[3+len]; + struct i2c_msg msg = { + .addr = state->config.demod_address, + .flags = 0, + .len = sizeof(buf), + .buf = buf }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = mbox; + memcpy(&buf[3], val, len); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + warn("I2C write failed reg:%04x len:%d", reg, len); + return -EREMOTEIO; + } + return 0; +} + +static int af9013_write_ofdm_regs(struct af9013_state *state, u16 reg, u8 *val, + u8 len) +{ + u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(0 << 6)|(0 << 7); + return af9013_write_regs(state, mbox, reg, val, len); +} + +static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, + u8 len) +{ + u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(1 << 6)|(1 << 7); + return af9013_write_regs(state, mbox, reg, val, len); +} + +/* write single register */ +static int af9013_write_reg(struct af9013_state *state, u16 reg, u8 val) +{ + return af9013_write_ofdm_regs(state, reg, &val, 1); +} + +/* read single register */ +static int af9013_read_reg(struct af9013_state *state, u16 reg, u8 *val) +{ + u8 obuf[3] = { reg >> 8, reg & 0xff, 0 }; + u8 ibuf[1]; + struct i2c_msg msg[2] = { + { + .addr = state->config.demod_address, + .flags = 0, + .len = sizeof(obuf), + .buf = obuf + }, { + .addr = state->config.demod_address, + .flags = I2C_M_RD, + .len = sizeof(ibuf), + .buf = ibuf + } + }; + + if (i2c_transfer(state->i2c, msg, 2) != 2) { + warn("I2C read failed reg:%04x", reg); + return -EREMOTEIO; + } + *val = ibuf[0]; + return 0; +} + +static int af9013_write_reg_bits(struct af9013_state *state, u16 reg, u8 pos, + u8 len, u8 val) +{ + int ret; + u8 tmp, mask; + + ret = af9013_read_reg(state, reg, &tmp); + if (ret) + return ret; + + mask = regmask[len - 1] << pos; + tmp = (tmp & ~mask) | ((val << pos) & mask); + + return af9013_write_reg(state, reg, tmp); +} + +static int af9013_read_reg_bits(struct af9013_state *state, u16 reg, u8 pos, + u8 len, u8 *val) +{ + int ret; + u8 tmp; + + ret = af9013_read_reg(state, reg, &tmp); + if (ret) + return ret; + *val = (tmp >> pos) & regmask[len - 1]; + return 0; +} + +static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) +{ + int ret; + u8 pos; + u16 addr; + deb_info("%s: gpio:%d gpioval:%02x\n", __func__, gpio, gpioval); + +/* GPIO0 & GPIO1 0xd735 + GPIO2 & GPIO3 0xd736 */ + + switch (gpio) { + case 0: + case 1: + addr = 0xd735; + break; + case 2: + case 3: + addr = 0xd736; + break; + + default: + err("invalid gpio:%d\n", gpio); + ret = -EINVAL; + goto error; + }; + + switch (gpio) { + case 0: + case 2: + pos = 0; + break; + case 1: + case 3: + default: + pos = 4; + break; + }; + + ret = af9013_write_reg_bits(state, addr, pos, 4, gpioval); + +error: + return ret; +} + +static u32 af913_div(u32 a, u32 b, u32 x) +{ + u32 r = 0, c = 0, i; + deb_info("%s: a:%d b:%d x:%d\n", __func__, a, b, x); + + if (a > b) { + c = a / b; + a = a - c * b; + } + + for (i = 0; i < x; i++) { + if (a >= b) { + r += 1; + a -= b; + } + a <<= 1; + r <<= 1; + } + r = (c << (u32)x) + r; + + deb_info("%s: a:%d b:%d x:%d r:%d r:%x\n", __func__, a, b, x, r, r); + return r; +} + +static int af9013_set_coeff(struct af9013_state *state, fe_bandwidth_t bw) +{ + int ret = 0; + u8 i = 0; + u8 buf[24]; + u32 ns_coeff1_2048nu; + u32 ns_coeff1_8191nu; + u32 ns_coeff1_8192nu; + u32 ns_coeff1_8193nu; + u32 ns_coeff2_2k; + u32 ns_coeff2_8k; + + deb_info("%s: adc_clock:%d bw:%d\n", __func__, + state->config.adc_clock, bw); + + switch (state->config.adc_clock) { + case 28800: /* 28.800 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x01e79e7a; + ns_coeff1_8191nu = 0x0079eb6e; + ns_coeff1_8192nu = 0x0079e79e; + ns_coeff1_8193nu = 0x0079e3cf; + ns_coeff2_2k = 0x00f3cf3d; + ns_coeff2_8k = 0x003cf3cf; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x0238e38e; + ns_coeff1_8191nu = 0x008e3d55; + ns_coeff1_8192nu = 0x008e38e4; + ns_coeff1_8193nu = 0x008e3472; + ns_coeff2_2k = 0x011c71c7; + ns_coeff2_8k = 0x00471c72; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x028a28a3; + ns_coeff1_8191nu = 0x00a28f3d; + ns_coeff1_8192nu = 0x00a28a29; + ns_coeff1_8193nu = 0x00a28514; + ns_coeff2_2k = 0x01451451; + ns_coeff2_8k = 0x00514514; + break; + default: + ret = -EINVAL; + } + break; + case 20480: /* 20.480 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x02adb6dc; + ns_coeff1_8191nu = 0x00ab7313; + ns_coeff1_8192nu = 0x00ab6db7; + ns_coeff1_8193nu = 0x00ab685c; + ns_coeff2_2k = 0x0156db6e; + ns_coeff2_8k = 0x0055b6dc; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x03200001; + ns_coeff1_8191nu = 0x00c80640; + ns_coeff1_8192nu = 0x00c80000; + ns_coeff1_8193nu = 0x00c7f9c0; + ns_coeff2_2k = 0x01900000; + ns_coeff2_8k = 0x00640000; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x03924926; + ns_coeff1_8191nu = 0x00e4996e; + ns_coeff1_8192nu = 0x00e49249; + ns_coeff1_8193nu = 0x00e48b25; + ns_coeff2_2k = 0x01c92493; + ns_coeff2_8k = 0x00724925; + break; + default: + ret = -EINVAL; + } + break; + case 28000: /* 28.000 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x01f58d10; + ns_coeff1_8191nu = 0x007d672f; + ns_coeff1_8192nu = 0x007d6344; + ns_coeff1_8193nu = 0x007d5f59; + ns_coeff2_2k = 0x00fac688; + ns_coeff2_8k = 0x003eb1a2; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x02492492; + ns_coeff1_8191nu = 0x00924db7; + ns_coeff1_8192nu = 0x00924925; + ns_coeff1_8193nu = 0x00924492; + ns_coeff2_2k = 0x01249249; + ns_coeff2_8k = 0x00492492; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x029cbc15; + ns_coeff1_8191nu = 0x00a7343f; + ns_coeff1_8192nu = 0x00a72f05; + ns_coeff1_8193nu = 0x00a729cc; + ns_coeff2_2k = 0x014e5e0a; + ns_coeff2_8k = 0x00539783; + break; + default: + ret = -EINVAL; + } + break; + case 25000: /* 25.000 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x0231bcb5; + ns_coeff1_8191nu = 0x008c7391; + ns_coeff1_8192nu = 0x008c6f2d; + ns_coeff1_8193nu = 0x008c6aca; + ns_coeff2_2k = 0x0118de5b; + ns_coeff2_8k = 0x00463797; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x028f5c29; + ns_coeff1_8191nu = 0x00a3dc29; + ns_coeff1_8192nu = 0x00a3d70a; + ns_coeff1_8193nu = 0x00a3d1ec; + ns_coeff2_2k = 0x0147ae14; + ns_coeff2_8k = 0x0051eb85; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x02ecfb9d; + ns_coeff1_8191nu = 0x00bb44c1; + ns_coeff1_8192nu = 0x00bb3ee7; + ns_coeff1_8193nu = 0x00bb390d; + ns_coeff2_2k = 0x01767dce; + ns_coeff2_8k = 0x005d9f74; + break; + default: + ret = -EINVAL; + } + break; + default: + err("invalid xtal"); + return -EINVAL; + } + if (ret) { + err("invalid bandwidth"); + return ret; + } + + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x00ff0000) >> 16); + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff2_2k & 0x01c00000) >> 22); + buf[i++] = (u8) ((ns_coeff2_2k & 0x003fc000) >> 14); + buf[i++] = (u8) ((ns_coeff2_2k & 0x00003fc0) >> 6); + buf[i++] = (u8) ((ns_coeff2_2k & 0x0000003f)); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x00ffc000) >> 16); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x00ffc000) >> 16); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x00ffc000) >> 16); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff2_8k & 0x01c00000) >> 22); + buf[i++] = (u8) ((ns_coeff2_8k & 0x003fc000) >> 14); + buf[i++] = (u8) ((ns_coeff2_8k & 0x00003fc0) >> 6); + buf[i++] = (u8) ((ns_coeff2_8k & 0x0000003f)); + + deb_info("%s: coeff:", __func__); + debug_dump(buf, sizeof(buf), deb_info); + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, 0xae00 + i, buf[i]); + if (ret) + break; + } + + return ret; +} + +static int af9013_set_adc_ctrl(struct af9013_state *state) +{ + int ret; + u8 buf[3], tmp, i; + u32 adc_cw; + + deb_info("%s: adc_clock:%d\n", __func__, state->config.adc_clock); + + /* adc frequency type */ + switch (state->config.adc_clock) { + case 28800: /* 28.800 MHz */ + tmp = 0; + break; + case 20480: /* 20.480 MHz */ + tmp = 1; + break; + case 28000: /* 28.000 MHz */ + tmp = 2; + break; + case 25000: /* 25.000 MHz */ + tmp = 3; + break; + default: + err("invalid xtal"); + return -EINVAL; + } + + adc_cw = af913_div(state->config.adc_clock*1000, 1000000ul, 19ul); + + buf[0] = (u8) ((adc_cw & 0x000000ff)); + buf[1] = (u8) ((adc_cw & 0x0000ff00) >> 8); + buf[2] = (u8) ((adc_cw & 0x00ff0000) >> 16); + + deb_info("%s: adc_cw:", __func__); + debug_dump(buf, sizeof(buf), deb_info); + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, 0xd180 + i, buf[i]); + if (ret) + goto error; + } + ret = af9013_write_reg_bits(state, 0x9bd2, 0, 4, tmp); +error: + return ret; +} + +static int af9013_set_freq_ctrl(struct af9013_state *state, fe_bandwidth_t bw) +{ + int ret; + u16 addr; + u8 buf[3], i, j; + u32 adc_freq, freq_cw; + s8 bfs_spec_inv; + int if_sample_freq; + + for (j = 0; j < 3; j++) { + if (j == 0) { + addr = 0xd140; /* fcw normal */ + bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; + } else if (j == 1) { + addr = 0x9be7; /* fcw dummy ram */ + bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; + } else { + addr = 0x9bea; /* fcw inverted */ + bfs_spec_inv = state->config.rf_spec_inv ? 1 : -1; + } + + adc_freq = state->config.adc_clock * 1000; + if_sample_freq = state->config.tuner_if * 1000; + + /* TDA18271 uses different sampling freq for every bw */ + if (state->config.tuner == AF9013_TUNER_TDA18271) { + switch (bw) { + case BANDWIDTH_6_MHZ: + if_sample_freq = 3300000; /* 3.3 MHz */ + break; + case BANDWIDTH_7_MHZ: + if_sample_freq = 3800000; /* 3.8 MHz */ + break; + case BANDWIDTH_8_MHZ: + default: + if_sample_freq = 4300000; /* 4.3 MHz */ + break; + } + } + + while (if_sample_freq > (adc_freq / 2)) + if_sample_freq = if_sample_freq - adc_freq; + + if (if_sample_freq >= 0) + bfs_spec_inv = bfs_spec_inv * (-1); + else + if_sample_freq = if_sample_freq * (-1); + + freq_cw = af913_div(if_sample_freq, adc_freq, 23ul); + + if (bfs_spec_inv == -1) + freq_cw = 0x00800000 - freq_cw; + + buf[0] = (u8) ((freq_cw & 0x000000ff)); + buf[1] = (u8) ((freq_cw & 0x0000ff00) >> 8); + buf[2] = (u8) ((freq_cw & 0x007f0000) >> 16); + + + deb_info("%s: freq_cw:", __func__); + debug_dump(buf, sizeof(buf), deb_info); + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, addr++, buf[i]); + if (ret) + goto error; + } + } +error: + return ret; +} + +static int af9013_set_ofdm_params(struct af9013_state *state, + struct dvb_ofdm_parameters *params, u8 *auto_mode) +{ + int ret; + u8 i, buf[3] = {0, 0, 0}; + *auto_mode = 0; /* set if parameters are requested to auto set */ + + switch (params->transmission_mode) { + case TRANSMISSION_MODE_AUTO: + *auto_mode = 1; + case TRANSMISSION_MODE_2K: + break; + case TRANSMISSION_MODE_8K: + buf[0] |= (1 << 0); + break; + default: + return -EINVAL; + } + + switch (params->guard_interval) { + case GUARD_INTERVAL_AUTO: + *auto_mode = 1; + case GUARD_INTERVAL_1_32: + break; + case GUARD_INTERVAL_1_16: + buf[0] |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + buf[0] |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + buf[0] |= (3 << 2); + break; + default: + return -EINVAL; + } + + switch (params->hierarchy_information) { + case HIERARCHY_AUTO: + *auto_mode = 1; + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + buf[0] |= (1 << 4); + break; + case HIERARCHY_2: + buf[0] |= (2 << 4); + break; + case HIERARCHY_4: + buf[0] |= (3 << 4); + break; + default: + return -EINVAL; + }; + + switch (params->constellation) { + case QAM_AUTO: + *auto_mode = 1; + case QPSK: + break; + case QAM_16: + buf[1] |= (1 << 6); + break; + case QAM_64: + buf[1] |= (2 << 6); + break; + default: + return -EINVAL; + } + + /* Use HP. How and which case we can switch to LP? */ + buf[1] |= (1 << 4); + + switch (params->code_rate_HP) { + case FEC_AUTO: + *auto_mode = 1; + case FEC_1_2: + break; + case FEC_2_3: + buf[2] |= (1 << 0); + break; + case FEC_3_4: + buf[2] |= (2 << 0); + break; + case FEC_5_6: + buf[2] |= (3 << 0); + break; + case FEC_7_8: + buf[2] |= (4 << 0); + break; + default: + return -EINVAL; + } + + switch (params->code_rate_LP) { + case FEC_AUTO: + /* if HIERARCHY_NONE and FEC_NONE then LP FEC is set to FEC_AUTO + by dvb_frontend.c for compatibility */ + if (params->hierarchy_information != HIERARCHY_NONE) + *auto_mode = 1; + case FEC_1_2: + break; + case FEC_2_3: + buf[2] |= (1 << 3); + break; + case FEC_3_4: + buf[2] |= (2 << 3); + break; + case FEC_5_6: + buf[2] |= (3 << 3); + break; + case FEC_7_8: + buf[2] |= (4 << 3); + break; + case FEC_NONE: + if (params->hierarchy_information == HIERARCHY_AUTO) + break; + default: + return -EINVAL; + } + + switch (params->bandwidth) { + case BANDWIDTH_6_MHZ: + break; + case BANDWIDTH_7_MHZ: + buf[1] |= (1 << 2); + break; + case BANDWIDTH_8_MHZ: + buf[1] |= (2 << 2); + break; + default: + return -EINVAL; + } + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, 0xd3c0 + i, buf[i]); + if (ret) + break; + } + + return ret; +} + +static int af9013_reset(struct af9013_state *state, u8 sleep) +{ + int ret; + u8 tmp, i; + deb_info("%s\n", __func__); + + /* enable OFDM reset */ + ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 1); + if (ret) + goto error; + + /* start reset mechanism */ + ret = af9013_write_reg(state, 0xaeff, 1); + if (ret) + goto error; + + /* reset is done when bit 1 is set */ + for (i = 0; i < 150; i++) { + ret = af9013_read_reg_bits(state, 0xd417, 1, 1, &tmp); + if (ret) + goto error; + if (tmp) + break; /* reset done */ + msleep(10); + } + if (!tmp) + return -ETIMEDOUT; + + /* don't clear reset when going to sleep */ + if (!sleep) { + /* clear OFDM reset */ + ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); + if (ret) + goto error; + + /* disable OFDM reset */ + ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); + } +error: + return ret; +} + +static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) +{ + int ret; + deb_info("%s: onoff:%d\n", __func__, onoff); + + if (onoff) { + /* power on */ + ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 0); + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); + } else { + /* power off */ + ret = af9013_reset(state, 1); + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 1); + } +error: + return ret; +} + +static int af9013_lock_led(struct af9013_state *state, u8 onoff) +{ + deb_info("%s: onoff:%d\n", __func__, onoff); + + return af9013_write_reg_bits(state, 0xd730, 0, 1, onoff); +} + +static int af9013_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 auto_mode; /* auto set TPS */ + + deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency, + params->u.ofdm.bandwidth); + + state->frequency = params->frequency; + + /* program CFOE coefficients */ + ret = af9013_set_coeff(state, params->u.ofdm.bandwidth); + if (ret) + goto error; + + /* program frequency control */ + ret = af9013_set_freq_ctrl(state, params->u.ofdm.bandwidth); + if (ret) + goto error; + + /* clear TPS lock flag (inverted flag) */ + ret = af9013_write_reg_bits(state, 0xd330, 3, 1, 1); + if (ret) + goto error; + + /* clear MPEG2 lock flag */ + ret = af9013_write_reg_bits(state, 0xd507, 6, 1, 0); + if (ret) + goto error; + + /* empty channel function */ + ret = af9013_write_reg_bits(state, 0x9bfe, 0, 1, 0); + if (ret) + goto error; + + /* empty DVB-T channel function */ + ret = af9013_write_reg_bits(state, 0x9bc2, 0, 1, 0); + if (ret) + goto error; + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, params); + + /* program TPS and bandwidth, check if auto mode needed */ + ret = af9013_set_ofdm_params(state, ¶ms->u.ofdm, &auto_mode); + if (ret) + goto error; + + if (auto_mode) { + /* clear easy mode flag */ + ret = af9013_write_reg(state, 0xaefd, 0); + deb_info("%s: auto TPS\n", __func__); + } else { + /* set easy mode flag */ + ret = af9013_write_reg(state, 0xaefd, 1); + if (ret) + goto error; + ret = af9013_write_reg(state, 0xaefe, 0); + deb_info("%s: manual TPS\n", __func__); + } + if (ret) + goto error; + + /* everything is set, lets try to receive channel - OFSM GO! */ + ret = af9013_write_reg(state, 0xffff, 0); + if (ret) + goto error; + +error: + return ret; +} + +static int af9013_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 i, buf[3]; + deb_info("%s\n", __func__); + + /* read TPS registers */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0xd3c0 + i, &buf[i]); + if (ret) + goto error; + } + + switch ((buf[1] >> 6) & 3) { + case 0: + p->u.ofdm.constellation = QPSK; + break; + case 1: + p->u.ofdm.constellation = QAM_16; + break; + case 2: + p->u.ofdm.constellation = QAM_64; + break; + } + + switch ((buf[0] >> 0) & 3) { + case 0: + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[0] >> 2) & 3) { + case 0: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + p->u.ofdm.hierarchy_information = HIERARCHY_NONE; + break; + case 1: + p->u.ofdm.hierarchy_information = HIERARCHY_1; + break; + case 2: + p->u.ofdm.hierarchy_information = HIERARCHY_2; + break; + case 3: + p->u.ofdm.hierarchy_information = HIERARCHY_4; + break; + } + + switch ((buf[2] >> 0) & 7) { + case 0: + p->u.ofdm.code_rate_HP = FEC_1_2; + break; + case 1: + p->u.ofdm.code_rate_HP = FEC_2_3; + break; + case 2: + p->u.ofdm.code_rate_HP = FEC_3_4; + break; + case 3: + p->u.ofdm.code_rate_HP = FEC_5_6; + break; + case 4: + p->u.ofdm.code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[2] >> 3) & 7) { + case 0: + p->u.ofdm.code_rate_LP = FEC_1_2; + break; + case 1: + p->u.ofdm.code_rate_LP = FEC_2_3; + break; + case 2: + p->u.ofdm.code_rate_LP = FEC_3_4; + break; + case 3: + p->u.ofdm.code_rate_LP = FEC_5_6; + break; + case 4: + p->u.ofdm.code_rate_LP = FEC_7_8; + break; + } + + switch ((buf[1] >> 2) & 3) { + case 0: + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + break; + case 1: + p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; + break; + case 2: + p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; + break; + } + + p->inversion = INVERSION_AUTO; + p->frequency = state->frequency; + +error: + return ret; +} + +static int af9013_update_ber_unc(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[3], i; + u32 error_bit_count = 0; + u32 total_bit_count = 0; + u32 abort_packet_count = 0; + + state->ber = 0; + + /* check if error bit count is ready */ + ret = af9013_read_reg_bits(state, 0xd391, 4, 1, &buf[0]); + if (ret) + goto error; + if (!buf[0]) + goto exit; + + /* get RSD packet abort count */ + for (i = 0; i < 2; i++) { + ret = af9013_read_reg(state, 0xd38a + i, &buf[i]); + if (ret) + goto error; + } + abort_packet_count = (buf[1] << 8) + buf[0]; + + /* get error bit count */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0xd387 + i, &buf[i]); + if (ret) + goto error; + } + error_bit_count = (buf[2] << 16) + (buf[1] << 8) + buf[0]; + error_bit_count = error_bit_count - abort_packet_count * 8 * 8; + + /* get used RSD counting period (10000 RSD packets used) */ + for (i = 0; i < 2; i++) { + ret = af9013_read_reg(state, 0xd385 + i, &buf[i]); + if (ret) + goto error; + } + total_bit_count = (buf[1] << 8) + buf[0]; + total_bit_count = total_bit_count - abort_packet_count; + total_bit_count = total_bit_count * 204 * 8; + + if (total_bit_count) + state->ber = error_bit_count * 1000000000 / total_bit_count; + + state->ucblocks += abort_packet_count; + + deb_info("%s: err bits:%d total bits:%d abort count:%d\n", __func__, + error_bit_count, total_bit_count, abort_packet_count); + + /* set BER counting range */ + ret = af9013_write_reg(state, 0xd385, 10000 & 0xff); + if (ret) + goto error; + ret = af9013_write_reg(state, 0xd386, 10000 >> 8); + if (ret) + goto error; + /* reset and start BER counter */ + ret = af9013_write_reg_bits(state, 0xd391, 4, 1, 1); + if (ret) + goto error; + +exit: +error: + return ret; +} + +static int af9013_update_snr(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[3], i, len; + u32 quant = 0; + struct snr_table *snr_table; + + /* check if quantizer ready (for snr) */ + ret = af9013_read_reg_bits(state, 0xd2e1, 3, 1, &buf[0]); + if (ret) + goto error; + if (buf[0]) { + /* quantizer ready - read it */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0xd2e3 + i, &buf[i]); + if (ret) + goto error; + } + quant = (buf[2] << 16) + (buf[1] << 8) + buf[0]; + + /* read current constellation */ + ret = af9013_read_reg(state, 0xd3c1, &buf[0]); + if (ret) + goto error; + + switch ((buf[0] >> 6) & 3) { + case 0: + len = ARRAY_SIZE(qpsk_snr_table); + snr_table = qpsk_snr_table; + break; + case 1: + len = ARRAY_SIZE(qam16_snr_table); + snr_table = qam16_snr_table; + break; + case 2: + len = ARRAY_SIZE(qam64_snr_table); + snr_table = qam64_snr_table; + break; + default: + len = 0; + break; + } + + if (len) { + for (i = 0; i < len; i++) { + if (quant < snr_table[i].val) { + state->snr = snr_table[i].snr * 10; + break; + } + } + } + + /* set quantizer super frame count */ + ret = af9013_write_reg(state, 0xd2e2, 1); + if (ret) + goto error; + + /* check quantizer availability */ + for (i = 0; i < 10; i++) { + msleep(10); + ret = af9013_read_reg_bits(state, 0xd2e6, 0, 1, + &buf[0]); + if (ret) + goto error; + if (!buf[0]) + break; + } + + /* reset quantizer */ + ret = af9013_write_reg_bits(state, 0xd2e1, 3, 1, 1); + if (ret) + goto error; + } + +error: + return ret; +} + +static int af9013_update_signal_strength(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 tmp0; + u8 rf_gain, rf_50, rf_80, if_gain, if_50, if_80; + int signal_strength; + + deb_info("%s\n", __func__); + + state->signal_strength = 0; + + ret = af9013_read_reg_bits(state, 0x9bee, 0, 1, &tmp0); + if (ret) + goto error; + if (tmp0) { + ret = af9013_read_reg(state, 0x9bbd, &rf_50); + if (ret) + goto error; + ret = af9013_read_reg(state, 0x9bd0, &rf_80); + if (ret) + goto error; + ret = af9013_read_reg(state, 0x9be2, &if_50); + if (ret) + goto error; + ret = af9013_read_reg(state, 0x9be4, &if_80); + if (ret) + goto error; + ret = af9013_read_reg(state, 0xd07c, &rf_gain); + if (ret) + goto error; + ret = af9013_read_reg(state, 0xd07d, &if_gain); + if (ret) + goto error; + signal_strength = (0xffff / (9 * (rf_50 + if_50) - \ + 11 * (rf_80 + if_80))) * (10 * (rf_gain + if_gain) - \ + 11 * (rf_80 + if_80)); + if (signal_strength < 0) + signal_strength = 0; + else if (signal_strength > 0xffff) + signal_strength = 0xffff; + + state->signal_strength = signal_strength; + } + +error: + return ret; +} + +static int af9013_update_statistics(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + if (time_before(jiffies, state->next_statistics_check)) + return 0; + + /* set minimum statistic update interval */ + state->next_statistics_check = jiffies + msecs_to_jiffies(1200); + + ret = af9013_update_signal_strength(fe); + if (ret) + goto error; + ret = af9013_update_snr(fe); + if (ret) + goto error; + ret = af9013_update_ber_unc(fe); + if (ret) + goto error; + +error: + return ret; +} + +static int af9013_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 800; + fesettings->step_size = 0; + fesettings->max_drift = 0; + + return 0; +} + +static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret = 0; + u8 tmp; + *status = 0; + + /* TPS lock */ + ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + /* MPEG2 lock */ + ret = af9013_read_reg_bits(state, 0xd507, 6, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + + if (!*status & FE_HAS_SIGNAL) { + /* AGC lock */ + ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_SIGNAL; + } + + if (!*status & FE_HAS_CARRIER) { + /* CFO lock */ + ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_CARRIER; + } + + if (!*status & FE_HAS_CARRIER) { + /* SFOE lock */ + ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_CARRIER; + } + + ret = af9013_update_statistics(fe); + +error: + return ret; +} + + +static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *ber = state->ber; + return ret; +} + +static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *strength = state->signal_strength; + return ret; +} + +static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *snr = state->snr; + return ret; +} + +static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *ucblocks = state->ucblocks; + return ret; +} + +static int af9013_sleep(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + deb_info("%s\n", __func__); + + ret = af9013_lock_led(state, 0); + if (ret) + goto error; + + ret = af9013_power_ctrl(state, 0); +error: + return ret; +} + +static int af9013_init(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret, i, len; + u8 tmp0, tmp1; + struct regdesc *init; + deb_info("%s\n", __func__); + + /* reset OFDM */ + ret = af9013_reset(state, 0); + if (ret) + goto error; + + /* power on */ + ret = af9013_power_ctrl(state, 1); + if (ret) + goto error; + + /* enable ADC */ + ret = af9013_write_reg(state, 0xd73a, 0xa4); + if (ret) + goto error; + + /* write API version to firmware */ + for (i = 0; i < sizeof(state->config.api_version); i++) { + ret = af9013_write_reg(state, 0x9bf2 + i, + state->config.api_version[i]); + if (ret) + goto error; + } + + /* program ADC control */ + ret = af9013_set_adc_ctrl(state); + if (ret) + goto error; + + /* set I2C master clock */ + ret = af9013_write_reg(state, 0xd416, 0x14); + if (ret) + goto error; + + /* set 16 embx */ + ret = af9013_write_reg_bits(state, 0xd700, 1, 1, 1); + if (ret) + goto error; + + /* set no trigger */ + ret = af9013_write_reg_bits(state, 0xd700, 2, 1, 0); + if (ret) + goto error; + + /* set read-update bit for constellation */ + ret = af9013_write_reg_bits(state, 0xd371, 1, 1, 1); + if (ret) + goto error; + + /* enable FEC monitor */ + ret = af9013_write_reg_bits(state, 0xd392, 1, 1, 1); + if (ret) + goto error; + + /* load OFSM settings */ + deb_info("%s: load ofsm settings\n", __func__); + len = ARRAY_SIZE(ofsm_init); + init = ofsm_init; + for (i = 0; i < len; i++) { + ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, + init[i].len, init[i].val); + if (ret) + goto error; + } + + /* load tuner specific settings */ + deb_info("%s: load tuner specific settings\n", __func__); + switch (state->config.tuner) { + case AF9013_TUNER_MXL5003D: + len = ARRAY_SIZE(tuner_init_mxl5003d); + init = tuner_init_mxl5003d; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + len = ARRAY_SIZE(tuner_init_mxl5005); + init = tuner_init_mxl5005; + break; + case AF9013_TUNER_ENV77H11D5: + len = ARRAY_SIZE(tuner_init_env77h11d5); + init = tuner_init_env77h11d5; + break; + case AF9013_TUNER_MT2060: + len = ARRAY_SIZE(tuner_init_mt2060); + init = tuner_init_mt2060; + break; + case AF9013_TUNER_MC44S803: + len = ARRAY_SIZE(tuner_init_mc44s803); + init = tuner_init_mc44s803; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + len = ARRAY_SIZE(tuner_init_qt1010); + init = tuner_init_qt1010; + break; + case AF9013_TUNER_MT2060_2: + len = ARRAY_SIZE(tuner_init_mt2060_2); + init = tuner_init_mt2060_2; + break; + case AF9013_TUNER_TDA18271: + len = ARRAY_SIZE(tuner_init_tda18271); + init = tuner_init_tda18271; + break; + case AF9013_TUNER_UNKNOWN: + default: + len = ARRAY_SIZE(tuner_init_unknown); + init = tuner_init_unknown; + break; + } + + for (i = 0; i < len; i++) { + ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, + init[i].len, init[i].val); + if (ret) + goto error; + } + + /* set TS mode */ + deb_info("%s: setting ts mode\n", __func__); + tmp0 = 0; /* parallel mode */ + tmp1 = 0; /* serial mode */ + switch (state->config.output_mode) { + case AF9013_OUTPUT_MODE_PARALLEL: + tmp0 = 1; + break; + case AF9013_OUTPUT_MODE_SERIAL: + tmp1 = 1; + break; + case AF9013_OUTPUT_MODE_USB: + /* usb mode for AF9015 */ + default: + break; + } + ret = af9013_write_reg_bits(state, 0xd500, 1, 1, tmp0); /* parallel */ + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd500, 2, 1, tmp1); /* serial */ + if (ret) + goto error; + + /* enable lock led */ + ret = af9013_lock_led(state, 1); + if (ret) + goto error; + +error: + return ret; +} + +static struct dvb_frontend_ops af9013_ops; + +static int af9013_download_firmware(struct af9013_state *state) +{ + int i, len, packets, remainder, ret; + const struct firmware *fw; + u16 addr = 0x5100; /* firmware start address */ + u16 checksum = 0; + u8 val; + u8 fw_params[4]; + u8 *data; + u8 *fw_file = AF9013_DEFAULT_FIRMWARE; + + msleep(100); + /* check whether firmware is already running */ + ret = af9013_read_reg(state, 0x98be, &val); + if (ret) + goto error; + else + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + info("found a '%s' in cold state, will try to load a firmware", + af9013_ops.info.name); + + /* request the firmware, this will block and timeout */ + ret = request_firmware(&fw, fw_file, &state->i2c->dev); + if (ret) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details" \ + " on firmware-problems. (%d)", + fw_file, ret); + goto error; + } + + info("downloading firmware from file '%s'", fw_file); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + fw_params[0] = checksum >> 8; + fw_params[1] = checksum & 0xff; + fw_params[2] = fw->size >> 8; + fw_params[3] = fw->size & 0xff; + + /* write fw checksum & size */ + ret = af9013_write_ofsm_regs(state, 0x50fc, + fw_params, sizeof(fw_params)); + if (ret) + goto error_release; + + #define FW_PACKET_MAX_DATA 16 + + packets = fw->size / FW_PACKET_MAX_DATA; + remainder = fw->size % FW_PACKET_MAX_DATA; + len = FW_PACKET_MAX_DATA; + for (i = 0; i <= packets; i++) { + if (i == packets) /* set size of the last packet */ + len = remainder; + + data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); + ret = af9013_write_ofsm_regs(state, addr, data, len); + addr += FW_PACKET_MAX_DATA; + + if (ret) { + err("firmware download failed at %d with %d", i, ret); + goto error_release; + } + } + + /* request boot firmware */ + ret = af9013_write_reg(state, 0xe205, 1); + if (ret) + goto error_release; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9013_read_reg(state, 0x98be, &val); + if (ret) + goto error_release; + + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + err("firmware did not run"); + ret = -1; + } else if (val != 0x0c) { + err("firmware boot timeout"); + ret = -1; + } + +error_release: + release_firmware(fw); +error: +exit: + if (!ret) + info("found a '%s' in warm state.", af9013_ops.info.name); + return ret; +} + +static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int ret; + struct af9013_state *state = fe->demodulator_priv; + deb_info("%s: enable:%d\n", __func__, enable); + + if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) + ret = af9013_write_reg_bits(state, 0xd417, 3, 1, enable); + else + ret = af9013_write_reg_bits(state, 0xd607, 2, 1, enable); + + return ret; +} + +static void af9013_release(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops af9013_ops; + +struct dvb_frontend *af9013_attach(const struct af9013_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct af9013_state *state = NULL; + u8 buf[3], i; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct af9013_config)); + + /* chip version */ + ret = af9013_read_reg_bits(state, 0xd733, 4, 4, &buf[2]); + if (ret) + goto error; + + /* ROM version */ + for (i = 0; i < 2; i++) { + ret = af9013_read_reg(state, 0x116b + i, &buf[i]); + if (ret) + goto error; + } + deb_info("%s: chip version:%d ROM version:%d.%d\n", __func__, + buf[2], buf[0], buf[1]); + + /* download firmware */ + if (state->config.output_mode != AF9013_OUTPUT_MODE_USB) { + ret = af9013_download_firmware(state); + if (ret) + goto error; + } + + /* firmware version */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0x5103 + i, &buf[i]); + if (ret) + goto error; + } + info("firmware version:%d.%d.%d", buf[0], buf[1], buf[2]); + + /* settings for mp2if */ + if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) { + /* AF9015 split PSB to 1.5k + 0.5k */ + ret = af9013_write_reg_bits(state, 0xd50b, 2, 1, 1); + } else { + /* AF9013 change the output bit to data7 */ + ret = af9013_write_reg_bits(state, 0xd500, 3, 1, 1); + if (ret) + goto error; + /* AF9013 set mpeg to full speed */ + ret = af9013_write_reg_bits(state, 0xd502, 4, 1, 1); + } + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd520, 4, 1, 1); + if (ret) + goto error; + + /* set GPIOs */ + for (i = 0; i < sizeof(state->config.gpio); i++) { + ret = af9013_set_gpio(state, i, state->config.gpio[i]); + if (ret) + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &af9013_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(af9013_attach); + +static struct dvb_frontend_ops af9013_ops = { + .info = { + .name = "Afatech AF9013 DVB-T", + .type = FE_OFDM, + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 250000, + .frequency_tolerance = 0, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = af9013_release, + .init = af9013_init, + .sleep = af9013_sleep, + .i2c_gate_ctrl = af9013_i2c_gate_ctrl, + + .set_frontend = af9013_set_frontend, + .get_frontend = af9013_get_frontend, + + .get_tune_settings = af9013_get_tune_settings, + + .read_status = af9013_read_status, + .read_ber = af9013_read_ber, + .read_signal_strength = af9013_read_signal_strength, + .read_snr = af9013_read_snr, + .read_ucblocks = af9013_read_ucblocks, +}; + +module_param_named(debug, af9013_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb/frontends/af9013.h new file mode 100644 index 00000000000..28b90c91c76 --- /dev/null +++ b/drivers/media/dvb/frontends/af9013.h @@ -0,0 +1,107 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _AF9013_H_ +#define _AF9013_H_ + +#include <linux/dvb/frontend.h> + +enum af9013_ts_mode { + AF9013_OUTPUT_MODE_PARALLEL, + AF9013_OUTPUT_MODE_SERIAL, + AF9013_OUTPUT_MODE_USB, /* only for AF9015 */ +}; + +enum af9013_tuner { + AF9013_TUNER_MXL5003D = 3, /* MaxLinear */ + AF9013_TUNER_MXL5005D = 13, /* MaxLinear */ + AF9013_TUNER_MXL5005R = 30, /* MaxLinear */ + AF9013_TUNER_ENV77H11D5 = 129, /* Panasonic */ + AF9013_TUNER_MT2060 = 130, /* Microtune */ + AF9013_TUNER_MC44S803 = 133, /* Freescale */ + AF9013_TUNER_QT1010 = 134, /* Quantek */ + AF9013_TUNER_UNKNOWN = 140, /* for can tuners ? */ + AF9013_TUNER_MT2060_2 = 147, /* Microtune */ + AF9013_TUNER_TDA18271 = 156, /* NXP */ + AF9013_TUNER_QT1010A = 162, /* Quantek */ +}; + +/* AF9013/5 GPIOs (mostly guessed) + demod#1-gpio#0 - set demod#2 i2c-addr for dual devices + demod#1-gpio#1 - xtal setting (?) + demod#1-gpio#3 - tuner#1 + demod#2-gpio#0 - tuner#2 + demod#2-gpio#1 - xtal setting (?) +*/ +#define AF9013_GPIO_ON (1 << 0) +#define AF9013_GPIO_EN (1 << 1) +#define AF9013_GPIO_O (1 << 2) +#define AF9013_GPIO_I (1 << 3) + +#define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN) +#define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) + +#define AF9013_GPIO_TUNER_ON (AF9013_GPIO_ON|AF9013_GPIO_EN) +#define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) + +struct af9013_config { + /* demodulator's I2C address */ + u8 demod_address; + + /* frequencies in kHz */ + u32 adc_clock; + + /* tuner ID */ + u8 tuner; + + /* tuner IF */ + u16 tuner_if; + + /* TS data output mode */ + u8 output_mode:2; + + /* RF spectrum inversion */ + u8 rf_spec_inv:1; + + /* API version */ + u8 api_version[4]; + + /* GPIOs */ + u8 gpio[4]; +}; + + +#if defined(CONFIG_DVB_AF9013) || \ + (defined(CONFIG_DVB_AF9013_MODULE) && defined(MODULE)) +extern struct dvb_frontend *af9013_attach(const struct af9013_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *af9013_attach( +const struct af9013_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_AF9013 */ + +#endif /* _AF9013_H_ */ diff --git a/drivers/media/dvb/frontends/af9013_priv.h b/drivers/media/dvb/frontends/af9013_priv.h new file mode 100644 index 00000000000..163e251d0b7 --- /dev/null +++ b/drivers/media/dvb/frontends/af9013_priv.h @@ -0,0 +1,869 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _AF9013_PRIV_ +#define _AF9013_PRIV_ + +#define LOG_PREFIX "af9013" +extern int af9013_debug; + +#define dprintk(var, level, args...) \ + do { if ((var & level)) printk(args); } while (0) + +#define debug_dump(b, l, func) {\ + int loop_; \ + for (loop_ = 0; loop_ < l; loop_++) \ + func("%02x ", b[loop_]); \ + func("\n");\ +} + +#define deb_info(args...) dprintk(af9013_debug, 0x01, args) + +#undef err +#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) +#undef info +#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) +#undef warn +#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) + +#define AF9013_DEFAULT_FIRMWARE "dvb-fe-af9013.fw" + +struct regdesc { + u16 addr; + u8 pos:4; + u8 len:4; + u8 val; +}; + +struct snr_table { + u32 val; + u8 snr; +}; + +/* QPSK SNR lookup table */ +static struct snr_table qpsk_snr_table[] = { + { 0x0b4771, 0 }, + { 0x0c1aed, 1 }, + { 0x0d0d27, 2 }, + { 0x0e4d19, 3 }, + { 0x0e5da8, 4 }, + { 0x107097, 5 }, + { 0x116975, 6 }, + { 0x1252d9, 7 }, + { 0x131fa4, 8 }, + { 0x13d5e1, 9 }, + { 0x148e53, 10 }, + { 0x15358b, 11 }, + { 0x15dd29, 12 }, + { 0x168112, 13 }, + { 0x170b61, 14 }, + { 0xffffff, 15 }, +}; + +/* QAM16 SNR lookup table */ +static struct snr_table qam16_snr_table[] = { + { 0x05eb62, 5 }, + { 0x05fecf, 6 }, + { 0x060b80, 7 }, + { 0x062501, 8 }, + { 0x064865, 9 }, + { 0x069604, 10 }, + { 0x06f356, 11 }, + { 0x07706a, 12 }, + { 0x0804d3, 13 }, + { 0x089d1a, 14 }, + { 0x093e3d, 15 }, + { 0x09e35d, 16 }, + { 0x0a7c3c, 17 }, + { 0x0afaf8, 18 }, + { 0x0b719d, 19 }, + { 0xffffff, 20 }, +}; + +/* QAM64 SNR lookup table */ +static struct snr_table qam64_snr_table[] = { + { 0x03109b, 12 }, + { 0x0310d4, 13 }, + { 0x031920, 14 }, + { 0x0322d0, 15 }, + { 0x0339fc, 16 }, + { 0x0364a1, 17 }, + { 0x038bcc, 18 }, + { 0x03c7d3, 19 }, + { 0x0408cc, 20 }, + { 0x043bed, 21 }, + { 0x048061, 22 }, + { 0x04be95, 23 }, + { 0x04fa7d, 24 }, + { 0x052405, 25 }, + { 0x05570d, 26 }, + { 0xffffff, 27 }, +}; + +static struct regdesc ofsm_init[] = { + { 0xd73a, 0, 8, 0xa1 }, + { 0xd73b, 0, 8, 0x1f }, + { 0xd73c, 4, 4, 0x0a }, + { 0xd732, 3, 1, 0x00 }, + { 0xd731, 4, 2, 0x03 }, + { 0xd73d, 7, 1, 0x01 }, + { 0xd740, 0, 1, 0x00 }, + { 0xd740, 1, 1, 0x00 }, + { 0xd740, 2, 1, 0x00 }, + { 0xd740, 3, 1, 0x01 }, + { 0xd3c1, 4, 1, 0x01 }, + { 0xd3a2, 0, 8, 0x00 }, + { 0xd3a3, 0, 8, 0x04 }, + { 0xd305, 0, 8, 0x32 }, + { 0xd306, 0, 8, 0x10 }, + { 0xd304, 0, 8, 0x04 }, + { 0x9112, 0, 1, 0x01 }, + { 0x911d, 0, 1, 0x01 }, + { 0x911a, 0, 1, 0x01 }, + { 0x911b, 0, 1, 0x01 }, + { 0x9bce, 0, 4, 0x02 }, + { 0x9116, 0, 1, 0x01 }, + { 0x9bd1, 0, 1, 0x01 }, + { 0xd2e0, 0, 8, 0xd0 }, + { 0xd2e9, 0, 4, 0x0d }, + { 0xd38c, 0, 8, 0xfc }, + { 0xd38d, 0, 8, 0x00 }, + { 0xd38e, 0, 8, 0x7e }, + { 0xd38f, 0, 8, 0x00 }, + { 0xd390, 0, 8, 0x2f }, + { 0xd145, 4, 1, 0x01 }, + { 0xd1a9, 4, 1, 0x01 }, + { 0xd158, 5, 3, 0x01 }, + { 0xd159, 0, 6, 0x06 }, + { 0xd167, 0, 8, 0x00 }, + { 0xd168, 0, 4, 0x07 }, + { 0xd1c3, 5, 3, 0x00 }, + { 0xd1c4, 0, 6, 0x00 }, + { 0xd1c5, 0, 7, 0x10 }, + { 0xd1c6, 0, 3, 0x02 }, + { 0xd080, 2, 5, 0x03 }, + { 0xd081, 4, 4, 0x09 }, + { 0xd098, 4, 4, 0x0f }, + { 0xd098, 0, 4, 0x03 }, + { 0xdbc0, 3, 1, 0x01 }, + { 0xdbc0, 4, 1, 0x01 }, + { 0xdbc7, 0, 8, 0x08 }, + { 0xdbc8, 4, 4, 0x00 }, + { 0xdbc9, 0, 5, 0x01 }, + { 0xd280, 0, 8, 0xe0 }, + { 0xd281, 0, 8, 0xff }, + { 0xd282, 0, 8, 0xff }, + { 0xd283, 0, 8, 0xc3 }, + { 0xd284, 0, 8, 0xff }, + { 0xd285, 0, 4, 0x01 }, + { 0xd0f0, 0, 7, 0x1a }, + { 0xd0f1, 4, 1, 0x01 }, + { 0xd0f2, 0, 8, 0x0c }, + { 0xd103, 0, 4, 0x08 }, + { 0xd0f8, 0, 7, 0x20 }, + { 0xd111, 5, 1, 0x00 }, + { 0xd111, 6, 1, 0x00 }, + { 0x910b, 0, 8, 0x0a }, + { 0x9115, 0, 8, 0x02 }, + { 0x910c, 0, 8, 0x02 }, + { 0x910d, 0, 8, 0x08 }, + { 0x910e, 0, 8, 0x0a }, + { 0x9bf6, 0, 8, 0x06 }, + { 0x9bf8, 0, 8, 0x02 }, + { 0x9bf7, 0, 8, 0x05 }, + { 0x9bf9, 0, 8, 0x0f }, + { 0x9bfc, 0, 8, 0x13 }, + { 0x9bd3, 0, 8, 0xff }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, +}; + +/* Panasonic ENV77H11D5 tuner init + AF9013_TUNER_ENV77H11D5 = 129 */ +static struct regdesc tuner_init_env77h11d5[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x03 }, + { 0x9bbe, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0xd015, 0, 8, 0x50 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0xeb }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf4 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0xeb }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0x52 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* Microtune MT2060 tuner init + AF9013_TUNER_MT2060 = 130 */ +static struct regdesc tuner_init_mt2060[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x07 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bbe, 0, 1, 0x00 }, + { 0x9bcc, 0, 1, 0x00 }, + { 0x9bb9, 0, 8, 0x75 }, + { 0x9bcd, 0, 8, 0x24 }, + { 0x9bff, 0, 8, 0x30 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x32 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x36 }, + { 0xd00d, 0, 2, 0x03 }, + { 0xd00a, 0, 8, 0x35 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x90 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x36 }, + { 0x9bc6, 0, 8, 0x03 }, + { 0x9bba, 0, 8, 0xc9 }, + { 0x9bc9, 0, 8, 0x79 }, + { 0xd011, 0, 8, 0x10 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0x45 }, + { 0xd014, 0, 2, 0x03 }, + { 0xd040, 0, 8, 0x98 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0xcf }, + { 0xd043, 0, 2, 0x03 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xcc }, + { 0x9be4, 0, 8, 0xa0 }, + { 0x9bbd, 0, 8, 0x8e }, + { 0x9be2, 0, 8, 0x4d }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Microtune MT2060 tuner init + AF9013_TUNER_MT2060_2 = 147 */ +static struct regdesc tuner_init_mt2060_2[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x06 }, + { 0x9bbe, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x32 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x36 }, + { 0xd00d, 0, 2, 0x03 }, + { 0xd00a, 0, 8, 0x35 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x90 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x36 }, + { 0x9bc6, 0, 8, 0x03 }, + { 0x9bba, 0, 8, 0xc9 }, + { 0x9bc9, 0, 8, 0x79 }, + { 0xd011, 0, 8, 0x10 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0x45 }, + { 0xd014, 0, 2, 0x03 }, + { 0xd040, 0, 8, 0x98 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0xcf }, + { 0xd043, 0, 2, 0x03 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 8, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x96 }, + { 0xd054, 0, 8, 0x46 }, + { 0xd045, 7, 1, 0x00 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* MaxLinear MXL5003 tuner init + AF9013_TUNER_MXL5003D = 3 */ +static struct regdesc tuner_init_mxl5003d[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x09 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bfc, 0, 8, 0x0f }, + { 0x9bf6, 0, 8, 0x01 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0xd015, 0, 8, 0x33 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x40 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x6c }, + { 0xd007, 0, 2, 0x00 }, + { 0xd00c, 0, 8, 0x3d }, + { 0xd00d, 0, 2, 0x00 }, + { 0xd00a, 0, 8, 0x45 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x52 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x3d }, + { 0x9bc6, 0, 8, 0x00 }, + { 0x9bba, 0, 8, 0xa2 }, + { 0x9bc9, 0, 8, 0xa0 }, + { 0xd011, 0, 8, 0x56 }, + { 0xd012, 0, 2, 0x00 }, + { 0xd013, 0, 8, 0x50 }, + { 0xd014, 0, 2, 0x00 }, + { 0xd040, 0, 8, 0x56 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0x50 }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 8, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* MaxLinear MXL5005 tuner init + AF9013_TUNER_MXL5005D = 13 + AF9013_TUNER_MXL5005R = 30 */ +static struct regdesc tuner_init_mxl5005[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x07 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x28 }, + { 0x9bff, 0, 8, 0x24 }, + { 0xd015, 0, 8, 0x40 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x40 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x73 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0xfa }, + { 0xd00d, 0, 2, 0x01 }, + { 0xd00a, 0, 8, 0xff }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x23 }, + { 0x9bc8, 0, 8, 0x55 }, + { 0x9bc3, 0, 8, 0x01 }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0xfa }, + { 0x9bc6, 0, 8, 0x01 }, + { 0x9bba, 0, 8, 0xff }, + { 0x9bc9, 0, 8, 0xff }, + { 0x9bd3, 0, 8, 0x95 }, + { 0xd011, 0, 8, 0x70 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xfb }, + { 0xd014, 0, 2, 0x01 }, + { 0xd040, 0, 8, 0x70 }, + { 0xd041, 0, 2, 0x01 }, + { 0xd042, 0, 8, 0xfb }, + { 0xd043, 0, 2, 0x01 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0x93 }, + { 0x9be4, 0, 8, 0xfe }, + { 0x9bbd, 0, 8, 0x63 }, + { 0x9be2, 0, 8, 0xfe }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Quantek QT1010 tuner init + AF9013_TUNER_QT1010 = 134 + AF9013_TUNER_QT1010A = 162 */ +static struct regdesc tuner_init_qt1010[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x09 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x28 }, + { 0x9bff, 0, 8, 0x20 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x99 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x0f }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0x50 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x00 }, + { 0x9bc8, 0, 8, 0x00 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x0f }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bba, 0, 8, 0xc5 }, + { 0x9bc9, 0, 8, 0xff }, + { 0xd011, 0, 8, 0x58 }, + { 0xd012, 0, 2, 0x02 }, + { 0xd013, 0, 8, 0x89 }, + { 0xd014, 0, 2, 0x01 }, + { 0xd040, 0, 8, 0x58 }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x89 }, + { 0xd043, 0, 2, 0x01 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xcd }, + { 0x9be4, 0, 8, 0xbb }, + { 0x9bbd, 0, 8, 0x93 }, + { 0x9be2, 0, 8, 0x80 }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Freescale MC44S803 tuner init + AF9013_TUNER_MC44S803 = 133 */ +static struct regdesc tuner_init_mc44s803[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x06 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bf6, 0, 8, 0x01 }, + { 0x9bf8, 0, 8, 0x02 }, + { 0x9bf9, 0, 8, 0x02 }, + { 0x9bfc, 0, 8, 0x1f }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x24 }, + { 0x9bff, 0, 8, 0x24 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x01 }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x7b }, + { 0xd007, 0, 2, 0x00 }, + { 0xd00c, 0, 8, 0x7c }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xfe }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x08 }, + { 0x9bc8, 0, 8, 0x9a }, + { 0x9bc3, 0, 8, 0x01 }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x7c }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bba, 0, 8, 0xfc }, + { 0x9bc9, 0, 8, 0xaa }, + { 0xd011, 0, 8, 0x6b }, + { 0xd012, 0, 2, 0x00 }, + { 0xd013, 0, 8, 0x88 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x6b }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0x7c }, + { 0xd043, 0, 2, 0x02 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0x9e }, + { 0x9be4, 0, 8, 0xff }, + { 0x9bbd, 0, 8, 0x9e }, + { 0x9be2, 0, 8, 0x25 }, + { 0x9bee, 0, 1, 0x01 }, + { 0xd73b, 3, 1, 0x00 }, +}; + +/* unknown, probably for tin can tuner, tuner init + AF9013_TUNER_UNKNOWN = 140 */ +static struct regdesc tuner_init_unknown[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x02 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x18 }, + { 0x9bff, 0, 8, 0x2c }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x00 }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf6 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc8, 0, 8, 0xaa }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x00 }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0xf0 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* NXP TDA18271 tuner init + AF9013_TUNER_TDA18271 = 156 */ +static struct regdesc tuner_init_tda18271[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x04 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x18 }, + { 0x9bff, 0, 8, 0x2c }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x00 }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf6 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc8, 0, 8, 0xaa }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x00 }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0xf0 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xa8 }, + { 0x9be4, 0, 8, 0x7f }, + { 0x9bbd, 0, 8, 0xa8 }, + { 0x9be2, 0, 8, 0x20 }, + { 0x9bee, 0, 1, 0x01 }, +}; + +#endif /* _AF9013_PRIV_ */ diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 0b82cc2a1e1..eabf9a68e7e 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -40,6 +40,8 @@ struct au8522_state { u32 current_frequency; fe_modulation_t current_modulation; + u32 fe_status; + unsigned int led_state; }; static int debug; @@ -538,11 +540,98 @@ static int au8522_init(struct dvb_frontend *fe) return 0; } +static int au8522_led_gpio_enable(struct au8522_state *state, int onoff) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + u8 val; + + /* bail out if we cant control an LED */ + if (!led_config || !led_config->gpio_output || + !led_config->gpio_output_enable || !led_config->gpio_output_disable) + return 0; + + val = au8522_readreg(state, 0x4000 | + (led_config->gpio_output & ~0xc000)); + if (onoff) { + /* enable GPIO output */ + val &= ~((led_config->gpio_output_enable >> 8) & 0xff); + val |= (led_config->gpio_output_enable & 0xff); + } else { + /* disable GPIO output */ + val &= ~((led_config->gpio_output_disable >> 8) & 0xff); + val |= (led_config->gpio_output_disable & 0xff); + } + return au8522_writereg(state, 0x8000 | + (led_config->gpio_output & ~0xc000), val); +} + +/* led = 0 | off + * led = 1 | signal ok + * led = 2 | signal strong + * led < 0 | only light led if leds are currently off + */ +static int au8522_led_ctrl(struct au8522_state *state, int led) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + int i, ret = 0; + + /* bail out if we cant control an LED */ + if (!led_config || !led_config->gpio_leds || + !led_config->num_led_states || !led_config->led_states) + return 0; + + if (led < 0) { + /* if LED is already lit, then leave it as-is */ + if (state->led_state) + return 0; + else + led *= -1; + } + + /* toggle LED if changing state */ + if (state->led_state != led) { + u8 val; + + dprintk("%s: %d\n", __func__, led); + + au8522_led_gpio_enable(state, 1); + + val = au8522_readreg(state, 0x4000 | + (led_config->gpio_leds & ~0xc000)); + + /* start with all leds off */ + for (i = 0; i < led_config->num_led_states; i++) + val &= ~led_config->led_states[i]; + + /* set selected LED state */ + if (led < led_config->num_led_states) + val |= led_config->led_states[led]; + else if (led_config->num_led_states) + val |= + led_config->led_states[led_config->num_led_states - 1]; + + ret = au8522_writereg(state, 0x8000 | + (led_config->gpio_leds & ~0xc000), val); + if (ret < 0) + return ret; + + state->led_state = led; + + if (led == 0) + au8522_led_gpio_enable(state, 0); + } + + return 0; +} + static int au8522_sleep(struct dvb_frontend *fe) { struct au8522_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); + /* turn off led */ + au8522_led_ctrl(state, 0); + state->current_frequency = 0; return 0; @@ -592,12 +681,53 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; break; } + state->fe_status = *status; + + if (*status & FE_HAS_LOCK) + /* turn on LED, if it isn't on already */ + au8522_led_ctrl(state, -1); + else + /* turn off LED */ + au8522_led_ctrl(state, 0); dprintk("%s() status 0x%08x\n", __func__, *status); return 0; } +static int au8522_led_status(struct au8522_state *state, const u16 *snr) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + int led; + u16 strong; + + /* bail out if we cant control an LED */ + if (!led_config) + return 0; + + if (0 == (state->fe_status & FE_HAS_LOCK)) + return au8522_led_ctrl(state, 0); + else if (state->current_modulation == QAM_256) + strong = led_config->qam256_strong; + else if (state->current_modulation == QAM_64) + strong = led_config->qam64_strong; + else /* (state->current_modulation == VSB_8) */ + strong = led_config->vsb8_strong; + + if (*snr >= strong) + led = 2; + else + led = 1; + + if ((state->led_state) && + (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10)) + /* snr didn't change enough to bother + * changing the color of the led */ + return 0; + + return au8522_led_ctrl(state, led); +} + static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) { struct au8522_state *state = fe->demodulator_priv; @@ -621,6 +751,9 @@ static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) au8522_readreg(state, 0x4311), snr); + if (state->config->led_cfg) + au8522_led_status(state, snr); + return ret; } diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h index 595915ade8c..7b94f554a09 100644 --- a/drivers/media/dvb/frontends/au8522.h +++ b/drivers/media/dvb/frontends/au8522.h @@ -30,6 +30,21 @@ enum au8522_if_freq { AU8522_IF_3_25MHZ, }; +struct au8522_led_config { + u16 vsb8_strong; + u16 qam64_strong; + u16 qam256_strong; + + u16 gpio_output; + /* unset hi bits, set low bits */ + u16 gpio_output_enable; + u16 gpio_output_disable; + + u16 gpio_leds; + u8 *led_states; + unsigned int num_led_states; +}; + struct au8522_config { /* the demodulator's i2c address */ u8 demod_address; @@ -39,6 +54,8 @@ struct au8522_config { #define AU8522_DEMODLOCKING 1 u8 status_mode; + struct au8522_led_config *led_cfg; + enum au8522_if_freq vsb_if; enum au8522_if_freq qam_if; }; diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index 9430e03dba6..5d1abe34bdd 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -34,13 +34,12 @@ #include "dvb_frontend.h" #include "cx22702.h" - struct cx22702_state { - struct i2c_adapter* i2c; + struct i2c_adapter *i2c; /* configuration settings */ - const struct cx22702_config* config; + const struct cx22702_config *config; struct dvb_frontend frontend; @@ -49,10 +48,13 @@ struct cx22702_state { }; static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + #define dprintk if (debug) printk /* Register values to initialise the demod */ -static u8 init_tab [] = { +static u8 init_tab[] = { 0x00, 0x00, /* Stop aquisition */ 0x0B, 0x06, 0x09, 0x01, @@ -80,65 +82,67 @@ static u8 init_tab [] = { 0xfd, 0x00, }; -static int cx22702_writereg (struct cx22702_state* state, u8 reg, u8 data) +static int cx22702_writereg(struct cx22702_state *state, u8 reg, u8 data) { int ret; - u8 buf [] = { reg, data }; - struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, .flags = 0, + .buf = buf, .len = 2 }; ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + printk(KERN_ERR + "%s: error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } -static u8 cx22702_readreg (struct cx22702_state* state, u8 reg) +static u8 cx22702_readreg(struct cx22702_state *state, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0 }; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; - struct i2c_msg msg [] = { - { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) - printk("%s: readreg error (ret == %i)\n", __func__, ret); + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); return b1[0]; } -static int cx22702_set_inversion (struct cx22702_state *state, int inversion) +static int cx22702_set_inversion(struct cx22702_state *state, int inversion) { u8 val; switch (inversion) { - - case INVERSION_AUTO: - return -EOPNOTSUPP; - - case INVERSION_ON: - val = cx22702_readreg (state, 0x0C); - return cx22702_writereg (state, 0x0C, val | 0x01); - - case INVERSION_OFF: - val = cx22702_readreg (state, 0x0C); - return cx22702_writereg (state, 0x0C, val & 0xfe); - - default: - return -EINVAL; - + case INVERSION_AUTO: + return -EOPNOTSUPP; + case INVERSION_ON: + val = cx22702_readreg(state, 0x0C); + return cx22702_writereg(state, 0x0C, val | 0x01); + case INVERSION_OFF: + val = cx22702_readreg(state, 0x0C); + return cx22702_writereg(state, 0x0C, val & 0xfe); + default: + return -EINVAL; } } /* Retrieve the demod settings */ -static int cx22702_get_tps (struct cx22702_state *state, struct dvb_ofdm_parameters *p) +static int cx22702_get_tps(struct cx22702_state *state, + struct dvb_ofdm_parameters *p) { u8 val; @@ -146,180 +150,281 @@ static int cx22702_get_tps (struct cx22702_state *state, struct dvb_ofdm_paramet if (!(cx22702_readreg(state, 0x0A) & 0x20)) return -EAGAIN; - val = cx22702_readreg (state, 0x01); - switch( (val&0x18)>>3) { - case 0: p->constellation = QPSK; break; - case 1: p->constellation = QAM_16; break; - case 2: p->constellation = QAM_64; break; + val = cx22702_readreg(state, 0x01); + switch ((val & 0x18) >> 3) { + case 0: + p->constellation = QPSK; + break; + case 1: + p->constellation = QAM_16; + break; + case 2: + p->constellation = QAM_64; + break; } - switch( val&0x07 ) { - case 0: p->hierarchy_information = HIERARCHY_NONE; break; - case 1: p->hierarchy_information = HIERARCHY_1; break; - case 2: p->hierarchy_information = HIERARCHY_2; break; - case 3: p->hierarchy_information = HIERARCHY_4; break; + switch (val & 0x07) { + case 0: + p->hierarchy_information = HIERARCHY_NONE; + break; + case 1: + p->hierarchy_information = HIERARCHY_1; + break; + case 2: + p->hierarchy_information = HIERARCHY_2; + break; + case 3: + p->hierarchy_information = HIERARCHY_4; + break; } - val = cx22702_readreg (state, 0x02); - switch( (val&0x38)>>3 ) { - case 0: p->code_rate_HP = FEC_1_2; break; - case 1: p->code_rate_HP = FEC_2_3; break; - case 2: p->code_rate_HP = FEC_3_4; break; - case 3: p->code_rate_HP = FEC_5_6; break; - case 4: p->code_rate_HP = FEC_7_8; break; + val = cx22702_readreg(state, 0x02); + switch ((val & 0x38) >> 3) { + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; } - switch( val&0x07 ) { - case 0: p->code_rate_LP = FEC_1_2; break; - case 1: p->code_rate_LP = FEC_2_3; break; - case 2: p->code_rate_LP = FEC_3_4; break; - case 3: p->code_rate_LP = FEC_5_6; break; - case 4: p->code_rate_LP = FEC_7_8; break; + switch (val & 0x07) { + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; } - - val = cx22702_readreg (state, 0x03); - switch( (val&0x0c)>>2 ) { - case 0: p->guard_interval = GUARD_INTERVAL_1_32; break; - case 1: p->guard_interval = GUARD_INTERVAL_1_16; break; - case 2: p->guard_interval = GUARD_INTERVAL_1_8; break; - case 3: p->guard_interval = GUARD_INTERVAL_1_4; break; + val = cx22702_readreg(state, 0x03); + switch ((val & 0x0c) >> 2) { + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; } - switch( val&0x03 ) { - case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break; - case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break; + switch (val & 0x03) { + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; } return 0; } -static int cx22702_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +static int cx22702_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - struct cx22702_state* state = fe->demodulator_priv; - dprintk ("%s(%d)\n", __func__, enable); + struct cx22702_state *state = fe->demodulator_priv; + dprintk("%s(%d)\n", __func__, enable); if (enable) - return cx22702_writereg (state, 0x0D, cx22702_readreg(state, 0x0D) & 0xfe); + return cx22702_writereg(state, 0x0D, + cx22702_readreg(state, 0x0D) & 0xfe); else - return cx22702_writereg (state, 0x0D, cx22702_readreg(state, 0x0D) | 1); + return cx22702_writereg(state, 0x0D, + cx22702_readreg(state, 0x0D) | 1); } /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ -static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx22702_set_tps(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { u8 val; - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } /* set inversion */ - cx22702_set_inversion (state, p->inversion); + cx22702_set_inversion(state, p->inversion); /* set bandwidth */ - switch(p->u.ofdm.bandwidth) { + switch (p->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xcf) | 0x20 ); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xcf) | 0x20); break; case BANDWIDTH_7_MHZ: - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xcf) | 0x10 ); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xcf) | 0x10); break; case BANDWIDTH_8_MHZ: - cx22702_writereg(state, 0x0C, cx22702_readreg(state, 0x0C) &0xcf ); + cx22702_writereg(state, 0x0C, + cx22702_readreg(state, 0x0C) & 0xcf); break; default: - dprintk ("%s: invalid bandwidth\n",__func__); + dprintk("%s: invalid bandwidth\n", __func__); return -EINVAL; } - - p->u.ofdm.code_rate_LP = FEC_AUTO; //temp hack as manual not working + p->u.ofdm.code_rate_LP = FEC_AUTO; /* temp hack as manual not working */ /* use auto configuration? */ - if((p->u.ofdm.hierarchy_information==HIERARCHY_AUTO) || - (p->u.ofdm.constellation==QAM_AUTO) || - (p->u.ofdm.code_rate_HP==FEC_AUTO) || - (p->u.ofdm.code_rate_LP==FEC_AUTO) || - (p->u.ofdm.guard_interval==GUARD_INTERVAL_AUTO) || - (p->u.ofdm.transmission_mode==TRANSMISSION_MODE_AUTO) ) { + if ((p->u.ofdm.hierarchy_information == HIERARCHY_AUTO) || + (p->u.ofdm.constellation == QAM_AUTO) || + (p->u.ofdm.code_rate_HP == FEC_AUTO) || + (p->u.ofdm.code_rate_LP == FEC_AUTO) || + (p->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO) || + (p->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO)) { /* TPS Source - use hardware driven values */ cx22702_writereg(state, 0x06, 0x10); cx22702_writereg(state, 0x07, 0x9); cx22702_writereg(state, 0x08, 0xC1); - cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) & 0xfc ); - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40 ); + cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) + & 0xfc); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */ - dprintk("%s: Autodetecting\n",__func__); + dprintk("%s: Autodetecting\n", __func__); return 0; } /* manually programmed values */ - val=0; - switch(p->u.ofdm.constellation) { - case QPSK: val = (val&0xe7); break; - case QAM_16: val = (val&0xe7)|0x08; break; - case QAM_64: val = (val&0xe7)|0x10; break; - default: - dprintk ("%s: invalid constellation\n",__func__); - return -EINVAL; + val = 0; + switch (p->u.ofdm.constellation) { + case QPSK: + val = (val & 0xe7); + break; + case QAM_16: + val = (val & 0xe7) | 0x08; + break; + case QAM_64: + val = (val & 0xe7) | 0x10; + break; + default: + dprintk("%s: invalid constellation\n", __func__); + return -EINVAL; } - switch(p->u.ofdm.hierarchy_information) { - case HIERARCHY_NONE: val = (val&0xf8); break; - case HIERARCHY_1: val = (val&0xf8)|1; break; - case HIERARCHY_2: val = (val&0xf8)|2; break; - case HIERARCHY_4: val = (val&0xf8)|3; break; - default: - dprintk ("%s: invalid hierarchy\n",__func__); - return -EINVAL; + switch (p->u.ofdm.hierarchy_information) { + case HIERARCHY_NONE: + val = (val & 0xf8); + break; + case HIERARCHY_1: + val = (val & 0xf8) | 1; + break; + case HIERARCHY_2: + val = (val & 0xf8) | 2; + break; + case HIERARCHY_4: + val = (val & 0xf8) | 3; + break; + default: + dprintk("%s: invalid hierarchy\n", __func__); + return -EINVAL; } - cx22702_writereg (state, 0x06, val); - - val=0; - switch(p->u.ofdm.code_rate_HP) { - case FEC_NONE: - case FEC_1_2: val = (val&0xc7); break; - case FEC_2_3: val = (val&0xc7)|0x08; break; - case FEC_3_4: val = (val&0xc7)|0x10; break; - case FEC_5_6: val = (val&0xc7)|0x18; break; - case FEC_7_8: val = (val&0xc7)|0x20; break; - default: - dprintk ("%s: invalid code_rate_HP\n",__func__); - return -EINVAL; + cx22702_writereg(state, 0x06, val); + + val = 0; + switch (p->u.ofdm.code_rate_HP) { + case FEC_NONE: + case FEC_1_2: + val = (val & 0xc7); + break; + case FEC_2_3: + val = (val & 0xc7) | 0x08; + break; + case FEC_3_4: + val = (val & 0xc7) | 0x10; + break; + case FEC_5_6: + val = (val & 0xc7) | 0x18; + break; + case FEC_7_8: + val = (val & 0xc7) | 0x20; + break; + default: + dprintk("%s: invalid code_rate_HP\n", __func__); + return -EINVAL; } - switch(p->u.ofdm.code_rate_LP) { - case FEC_NONE: - case FEC_1_2: val = (val&0xf8); break; - case FEC_2_3: val = (val&0xf8)|1; break; - case FEC_3_4: val = (val&0xf8)|2; break; - case FEC_5_6: val = (val&0xf8)|3; break; - case FEC_7_8: val = (val&0xf8)|4; break; - default: - dprintk ("%s: invalid code_rate_LP\n",__func__); - return -EINVAL; + switch (p->u.ofdm.code_rate_LP) { + case FEC_NONE: + case FEC_1_2: + val = (val & 0xf8); + break; + case FEC_2_3: + val = (val & 0xf8) | 1; + break; + case FEC_3_4: + val = (val & 0xf8) | 2; + break; + case FEC_5_6: + val = (val & 0xf8) | 3; + break; + case FEC_7_8: + val = (val & 0xf8) | 4; + break; + default: + dprintk("%s: invalid code_rate_LP\n", __func__); + return -EINVAL; } - cx22702_writereg (state, 0x07, val); - - val=0; - switch(p->u.ofdm.guard_interval) { - case GUARD_INTERVAL_1_32: val = (val&0xf3); break; - case GUARD_INTERVAL_1_16: val = (val&0xf3)|0x04; break; - case GUARD_INTERVAL_1_8: val = (val&0xf3)|0x08; break; - case GUARD_INTERVAL_1_4: val = (val&0xf3)|0x0c; break; - default: - dprintk ("%s: invalid guard_interval\n",__func__); - return -EINVAL; + cx22702_writereg(state, 0x07, val); + + val = 0; + switch (p->u.ofdm.guard_interval) { + case GUARD_INTERVAL_1_32: + val = (val & 0xf3); + break; + case GUARD_INTERVAL_1_16: + val = (val & 0xf3) | 0x04; + break; + case GUARD_INTERVAL_1_8: + val = (val & 0xf3) | 0x08; + break; + case GUARD_INTERVAL_1_4: + val = (val & 0xf3) | 0x0c; + break; + default: + dprintk("%s: invalid guard_interval\n", __func__); + return -EINVAL; } - switch(p->u.ofdm.transmission_mode) { - case TRANSMISSION_MODE_2K: val = (val&0xfc); break; - case TRANSMISSION_MODE_8K: val = (val&0xfc)|1; break; - default: - dprintk ("%s: invalid transmission_mode\n",__func__); - return -EINVAL; + switch (p->u.ofdm.transmission_mode) { + case TRANSMISSION_MODE_2K: + val = (val & 0xfc); + break; + case TRANSMISSION_MODE_8K: + val = (val & 0xfc) | 1; + break; + default: + dprintk("%s: invalid transmission_mode\n", __func__); + return -EINVAL; } cx22702_writereg(state, 0x08, val); - cx22702_writereg(state, 0x0B, (cx22702_readreg(state, 0x0B) & 0xfc) | 0x02 ); - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40 ); + cx22702_writereg(state, 0x0B, + (cx22702_readreg(state, 0x0B) & 0xfc) | 0x02); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); /* Begin channel aquisition */ cx22702_writereg(state, 0x00, 0x01); @@ -329,109 +434,111 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet /* Reset the demod hardware and reset all of the configuration registers to a default state. */ -static int cx22702_init (struct dvb_frontend* fe) +static int cx22702_init(struct dvb_frontend *fe) { int i; - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - cx22702_writereg (state, 0x00, 0x02); + cx22702_writereg(state, 0x00, 0x02); msleep(10); - for (i=0; i<sizeof(init_tab); i+=2) - cx22702_writereg (state, init_tab[i], init_tab[i+1]); + for (i = 0; i < ARRAY_SIZE(init_tab); i += 2) + cx22702_writereg(state, init_tab[i], init_tab[i + 1]); - cx22702_writereg (state, 0xf8, (state->config->output_mode << 1) & 0x02); + cx22702_writereg(state, 0xf8, (state->config->output_mode << 1) + & 0x02); cx22702_i2c_gate_ctrl(fe, 0); return 0; } -static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int cx22702_read_status(struct dvb_frontend *fe, fe_status_t *status) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; u8 reg0A; u8 reg23; *status = 0; - reg0A = cx22702_readreg (state, 0x0A); - reg23 = cx22702_readreg (state, 0x23); + reg0A = cx22702_readreg(state, 0x0A); + reg23 = cx22702_readreg(state, 0x23); - dprintk ("%s: status demod=0x%02x agc=0x%02x\n" - ,__func__,reg0A,reg23); + dprintk("%s: status demod=0x%02x agc=0x%02x\n" + , __func__, reg0A, reg23); - if(reg0A & 0x10) { + if (reg0A & 0x10) { *status |= FE_HAS_LOCK; *status |= FE_HAS_VITERBI; *status |= FE_HAS_SYNC; } - if(reg0A & 0x20) + if (reg0A & 0x20) *status |= FE_HAS_CARRIER; - if(reg23 < 0xf0) + if (reg23 < 0xf0) *status |= FE_HAS_SIGNAL; return 0; } -static int cx22702_read_ber(struct dvb_frontend* fe, u32* ber) +static int cx22702_read_ber(struct dvb_frontend *fe, u32 *ber) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - if(cx22702_readreg (state, 0xE4) & 0x02) { + if (cx22702_readreg(state, 0xE4) & 0x02) { /* Realtime statistics */ - *ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 7 - | (cx22702_readreg (state, 0xDF)&0x7F); + *ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | (cx22702_readreg(state, 0xDF) & 0x7F); } else { /* Averagtine statistics */ - *ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 7 - | cx22702_readreg (state, 0xDF); + *ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | cx22702_readreg(state, 0xDF); } return 0; } -static int cx22702_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +static int cx22702_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; u16 rs_ber = 0; - rs_ber = cx22702_readreg (state, 0x23); + rs_ber = cx22702_readreg(state, 0x23); *signal_strength = (rs_ber << 8) | rs_ber; return 0; } -static int cx22702_read_snr(struct dvb_frontend* fe, u16* snr) +static int cx22702_read_snr(struct dvb_frontend *fe, u16 *snr) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - u16 rs_ber=0; - if(cx22702_readreg (state, 0xE4) & 0x02) { + u16 rs_ber = 0; + if (cx22702_readreg(state, 0xE4) & 0x02) { /* Realtime statistics */ - rs_ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 7 - | (cx22702_readreg (state, 0xDF)& 0x7F); + rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | (cx22702_readreg(state, 0xDF) & 0x7F); } else { /* Averagine statistics */ - rs_ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 8 - | cx22702_readreg (state, 0xDF); + rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 8 + | cx22702_readreg(state, 0xDF); } *snr = ~rs_ber; return 0; } -static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +static int cx22702_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; u8 _ucblocks; /* RS Uncorrectable Packet Count then reset */ - _ucblocks = cx22702_readreg (state, 0xE3); + _ucblocks = cx22702_readreg(state, 0xE3); if (state->prevUCBlocks < _ucblocks) *ucblocks = (_ucblocks - state->prevUCBlocks); else @@ -441,34 +548,36 @@ static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) return 0; } -static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx22702_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - u8 reg0C = cx22702_readreg (state, 0x0C); + u8 reg0C = cx22702_readreg(state, 0x0C); p->inversion = reg0C & 0x1 ? INVERSION_ON : INVERSION_OFF; - return cx22702_get_tps (state, &p->u.ofdm); + return cx22702_get_tps(state, &p->u.ofdm); } -static int cx22702_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +static int cx22702_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 1000; return 0; } -static void cx22702_release(struct dvb_frontend* fe) +static void cx22702_release(struct dvb_frontend *fe) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; kfree(state); } static struct dvb_frontend_ops cx22702_ops; -struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *cx22702_attach(const struct cx22702_config *config, + struct i2c_adapter *i2c) { - struct cx22702_state* state = NULL; + struct cx22702_state *state = NULL; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL); @@ -485,7 +594,8 @@ struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, goto error; /* create dvb_frontend */ - memcpy(&state->frontend.ops, &cx22702_ops, sizeof(struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &cx22702_ops, + sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; @@ -493,6 +603,7 @@ error: kfree(state); return NULL; } +EXPORT_SYMBOL(cx22702_attach); static struct dvb_frontend_ops cx22702_ops = { @@ -525,11 +636,6 @@ static struct dvb_frontend_ops cx22702_ops = { .read_ucblocks = cx22702_read_ucblocks, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable verbose debug messages"); - MODULE_DESCRIPTION("Conexant CX22702 DVB-T Demodulator driver"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(cx22702_attach); diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index b1e465c6c2c..f154e1f428e 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -30,8 +30,7 @@ #include <linux/dvb/frontend.h> -struct cx22702_config -{ +struct cx22702_config { /* the demodulator's i2c address */ u8 demod_address; @@ -41,16 +40,19 @@ struct cx22702_config u8 output_mode; }; -#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE)) -extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, - struct i2c_adapter* i2c); +#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *cx22702_attach( + const struct cx22702_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *cx22702_attach( + const struct cx22702_config *config, + struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_CX22702 +#endif -#endif // CX22702_H +#endif diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h index 1792adb23c4..fdcceee91f3 100644 --- a/drivers/media/dvb/frontends/cx24110.h +++ b/drivers/media/dvb/frontends/cx24110.h @@ -33,12 +33,17 @@ struct cx24110_config u8 demod_address; }; -static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) { - int r = 0; - u8 buf[] = {(u8) (val>>24), (u8) (val>>16), (u8) (val>>8)}; +static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) +{ + u8 buf[] = { + (u8)((val >> 24) & 0xff), + (u8)((val >> 16) & 0xff), + (u8)((val >> 8) & 0xff) + }; + if (fe->ops.write) - r = fe->ops.write(fe, buf, 3); - return r; + return fe->ops.write(fe, buf, 3); + return 0; } #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c new file mode 100644 index 00000000000..b144b308a4d --- /dev/null +++ b/drivers/media/dvb/frontends/cx24116.c @@ -0,0 +1,1470 @@ +/* + Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver + + Copyright (C) 2006-2008 Steven Toth <stoth@hauppauge.com> + Copyright (C) 2006-2007 Georg Acher + Copyright (C) 2007-2008 Darron Broad + March 2007 + Fixed some bugs. + Added diseqc support. + Added corrected signal strength support. + August 2007 + Sync with legacy version. + Some clean ups. + Copyright (C) 2008 Igor Liplianin + September, 9th 2008 + Fixed locking on high symbol rates (>30000). + Implement MPEG initialization parameter. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/firmware.h> + +#include "dvb_frontend.h" +#include "cx24116.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_INFO "cx24116: " args); \ + } while (0) + +#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" +#define CX24116_SEARCH_RANGE_KHZ 5000 + +/* known registers */ +#define CX24116_REG_COMMAND (0x00) /* command args 0x00..0x1e */ +#define CX24116_REG_EXECUTE (0x1f) /* execute command */ +#define CX24116_REG_MAILBOX (0x96) /* FW or multipurpose mailbox? */ +#define CX24116_REG_RESET (0x20) /* reset status > 0 */ +#define CX24116_REG_SIGNAL (0x9e) /* signal low */ +#define CX24116_REG_SSTATUS (0x9d) /* signal high / status */ +#define CX24116_REG_QUALITY8 (0xa3) +#define CX24116_REG_QSTATUS (0xbc) +#define CX24116_REG_QUALITY0 (0xd5) +#define CX24116_REG_BER0 (0xc9) +#define CX24116_REG_BER8 (0xc8) +#define CX24116_REG_BER16 (0xc7) +#define CX24116_REG_BER24 (0xc6) +#define CX24116_REG_UCB0 (0xcb) +#define CX24116_REG_UCB8 (0xca) +#define CX24116_REG_CLKDIV (0xf3) +#define CX24116_REG_RATEDIV (0xf9) + +/* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */ +#define CX24116_REG_FECSTATUS (0x9c) + +/* FECSTATUS bits */ +/* mask to determine configured fec (not tuned) or actual fec (tuned) */ +#define CX24116_FEC_FECMASK (0x1f) + +/* Select DVB-S demodulator, else DVB-S2 */ +#define CX24116_FEC_DVBS (0x20) +#define CX24116_FEC_UNKNOWN (0x40) /* Unknown/unused */ + +/* Pilot mode requested when tuning else always reset when tuned */ +#define CX24116_FEC_PILOT (0x80) + +/* arg buffer size */ +#define CX24116_ARGLEN (0x1e) + +/* rolloff */ +#define CX24116_ROLLOFF_020 (0x00) +#define CX24116_ROLLOFF_025 (0x01) +#define CX24116_ROLLOFF_035 (0x02) + +/* pilot bit */ +#define CX24116_PILOT_OFF (0x00) +#define CX24116_PILOT_ON (0x40) + +/* signal status */ +#define CX24116_HAS_SIGNAL (0x01) +#define CX24116_HAS_CARRIER (0x02) +#define CX24116_HAS_VITERBI (0x04) +#define CX24116_HAS_SYNCLOCK (0x08) +#define CX24116_HAS_UNKNOWN1 (0x10) +#define CX24116_HAS_UNKNOWN2 (0x20) +#define CX24116_STATUS_MASK (0x3f) +#define CX24116_SIGNAL_MASK (0xc0) + +#define CX24116_DISEQC_TONEOFF (0) /* toneburst never sent */ +#define CX24116_DISEQC_TONECACHE (1) /* toneburst cached */ +#define CX24116_DISEQC_MESGCACHE (2) /* message cached */ + +/* arg offset for DiSEqC */ +#define CX24116_DISEQC_BURST (1) +#define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */ +#define CX24116_DISEQC_ARG3_0 (3) /* unknown value=0 */ +#define CX24116_DISEQC_ARG4_0 (4) /* unknown value=0 */ +#define CX24116_DISEQC_MSGLEN (5) +#define CX24116_DISEQC_MSGOFS (6) + +/* DiSEqC burst */ +#define CX24116_DISEQC_MINI_A (0) +#define CX24116_DISEQC_MINI_B (1) + +/* DiSEqC tone burst */ +static int toneburst = 1; +module_param(toneburst, int, 0644); +MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, "\ + "2=MESSAGE CACHE (default:1)"); + +/* SNR measurements */ +static int esno_snr; +module_param(esno_snr, int, 0644); +MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, "\ + "1=ESNO(db * 10) (default:0)"); + +enum cmds { + CMD_SET_VCO = 0x10, + CMD_TUNEREQUEST = 0x11, + CMD_MPEGCONFIG = 0x13, + CMD_TUNERINIT = 0x14, + CMD_BANDWIDTH = 0x15, + CMD_GETAGC = 0x19, + CMD_LNBCONFIG = 0x20, + CMD_LNBSEND = 0x21, /* Formerly CMD_SEND_DISEQC */ + CMD_SET_TONEPRE = 0x22, + CMD_SET_TONE = 0x23, + CMD_UPDFWVERS = 0x35, + CMD_TUNERSLEEP = 0x36, + CMD_AGCCONTROL = 0x3b, /* Unknown */ +}; + +/* The Demod/Tuner can't easily provide these, we cache them */ +struct cx24116_tuning { + u32 frequency; + u32 symbol_rate; + fe_spectral_inversion_t inversion; + fe_code_rate_t fec; + + fe_modulation_t modulation; + fe_pilot_t pilot; + fe_rolloff_t rolloff; + + /* Demod values */ + u8 fec_val; + u8 fec_mask; + u8 inversion_val; + u8 pilot_val; + u8 rolloff_val; +}; + +/* Basic commands that are sent to the firmware */ +struct cx24116_cmd { + u8 len; + u8 args[CX24116_ARGLEN]; +}; + +struct cx24116_state { + struct i2c_adapter *i2c; + const struct cx24116_config *config; + + struct dvb_frontend frontend; + + struct cx24116_tuning dcur; + struct cx24116_tuning dnxt; + + u8 skip_fw_load; + u8 burst; + struct cx24116_cmd dsec_cmd; +}; + +static int cx24116_writereg(struct cx24116_state *state, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 2 }; + int err; + + if (debug > 1) + printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", + __func__, reg, data); + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," + " value == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +/* Bulk byte writes to a single I2C address, for 32k firmware load */ +static int cx24116_writeregN(struct cx24116_state *state, int reg, + const u8 *data, u16 len) +{ + int ret = -EREMOTEIO; + struct i2c_msg msg; + u8 *buf; + + buf = kmalloc(len + 1, GFP_KERNEL); + if (buf == NULL) { + printk("Unable to kmalloc\n"); + ret = -ENOMEM; + goto error; + } + + *(buf) = reg; + memcpy(buf + 1, data, len); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = len + 1; + + if (debug > 1) + printk(KERN_INFO "cx24116: %s: write regN 0x%02x, len = %d\n", + __func__, reg, len); + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n", + __func__, ret, reg); + ret = -EREMOTEIO; + } + +error: + kfree(buf); + + return ret; +} + +static int cx24116_readreg(struct cx24116_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "%s: reg=0x%x (error=%d)\n", + __func__, reg, ret); + return ret; + } + + if (debug > 1) + printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n", + reg, b1[0]); + + return b1[0]; +} + +static int cx24116_set_inversion(struct cx24116_state *state, + fe_spectral_inversion_t inversion) +{ + dprintk("%s(%d)\n", __func__, inversion); + + switch (inversion) { + case INVERSION_OFF: + state->dnxt.inversion_val = 0x00; + break; + case INVERSION_ON: + state->dnxt.inversion_val = 0x04; + break; + case INVERSION_AUTO: + state->dnxt.inversion_val = 0x0C; + break; + default: + return -EINVAL; + } + + state->dnxt.inversion = inversion; + + return 0; +} + +/* + * modfec (modulation and FEC) + * =========================== + * + * MOD FEC mask/val standard + * ---- -------- ----------- -------- + * QPSK FEC_1_2 0x02 0x02+X DVB-S + * QPSK FEC_2_3 0x04 0x02+X DVB-S + * QPSK FEC_3_4 0x08 0x02+X DVB-S + * QPSK FEC_4_5 0x10 0x02+X DVB-S (?) + * QPSK FEC_5_6 0x20 0x02+X DVB-S + * QPSK FEC_6_7 0x40 0x02+X DVB-S + * QPSK FEC_7_8 0x80 0x02+X DVB-S + * QPSK FEC_8_9 0x01 0x02+X DVB-S (?) (NOT SUPPORTED?) + * QPSK AUTO 0xff 0x02+X DVB-S + * + * For DVB-S high byte probably represents FEC + * and low byte selects the modulator. The high + * byte is search range mask. Bit 5 may turn + * on DVB-S and remaining bits represent some + * kind of calibration (how/what i do not know). + * + * Eg.(2/3) szap "Zone Horror" + * + * mask/val = 0x04, 0x20 + * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 0 | FE_HAS_LOCK + * + * mask/val = 0x04, 0x30 + * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 0 | FE_HAS_LOCK + * + * After tuning FECSTATUS contains actual FEC + * in use numbered 1 through to 8 for 1/2 .. 2/3 etc + * + * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only) + * + * NBC-QPSK FEC_1_2 0x00, 0x04 DVB-S2 + * NBC-QPSK FEC_3_5 0x00, 0x05 DVB-S2 + * NBC-QPSK FEC_2_3 0x00, 0x06 DVB-S2 + * NBC-QPSK FEC_3_4 0x00, 0x07 DVB-S2 + * NBC-QPSK FEC_4_5 0x00, 0x08 DVB-S2 + * NBC-QPSK FEC_5_6 0x00, 0x09 DVB-S2 + * NBC-QPSK FEC_8_9 0x00, 0x0a DVB-S2 + * NBC-QPSK FEC_9_10 0x00, 0x0b DVB-S2 + * + * NBC-8PSK FEC_3_5 0x00, 0x0c DVB-S2 + * NBC-8PSK FEC_2_3 0x00, 0x0d DVB-S2 + * NBC-8PSK FEC_3_4 0x00, 0x0e DVB-S2 + * NBC-8PSK FEC_5_6 0x00, 0x0f DVB-S2 + * NBC-8PSK FEC_8_9 0x00, 0x10 DVB-S2 + * NBC-8PSK FEC_9_10 0x00, 0x11 DVB-S2 + * + * For DVB-S2 low bytes selects both modulator + * and FEC. High byte is meaningless here. To + * set pilot, bit 6 (0x40) is set. When inspecting + * FECSTATUS bit 7 (0x80) represents the pilot + * selection whilst not tuned. When tuned, actual FEC + * in use is found in FECSTATUS as per above. Pilot + * value is reset. + */ + +/* A table of modulation, fec and configuration bytes for the demod. + * Not all S2 mmodulation schemes are support and not all rates with + * a scheme are support. Especially, no auto detect when in S2 mode. + */ +struct cx24116_modfec { + fe_delivery_system_t delivery_system; + fe_modulation_t modulation; + fe_code_rate_t fec; + u8 mask; /* In DVBS mode this is used to autodetect */ + u8 val; /* Passed to the firmware to indicate mode selection */ +} CX24116_MODFEC_MODES[] = { + /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ + + /*mod fec mask val */ + { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 }, + { SYS_DVBS, QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ + { SYS_DVBS, QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ + { SYS_DVBS, QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ + { SYS_DVBS, QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ + { SYS_DVBS, QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ + { SYS_DVBS, QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ + { SYS_DVBS, QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ + { SYS_DVBS, QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ + { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 }, + /* NBC-QPSK */ + { SYS_DVBS2, QPSK, FEC_1_2, 0x00, 0x04 }, + { SYS_DVBS2, QPSK, FEC_3_5, 0x00, 0x05 }, + { SYS_DVBS2, QPSK, FEC_2_3, 0x00, 0x06 }, + { SYS_DVBS2, QPSK, FEC_3_4, 0x00, 0x07 }, + { SYS_DVBS2, QPSK, FEC_4_5, 0x00, 0x08 }, + { SYS_DVBS2, QPSK, FEC_5_6, 0x00, 0x09 }, + { SYS_DVBS2, QPSK, FEC_8_9, 0x00, 0x0a }, + { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b }, + /* 8PSK */ + { SYS_DVBS2, PSK_8, FEC_3_5, 0x00, 0x0c }, + { SYS_DVBS2, PSK_8, FEC_2_3, 0x00, 0x0d }, + { SYS_DVBS2, PSK_8, FEC_3_4, 0x00, 0x0e }, + { SYS_DVBS2, PSK_8, FEC_5_6, 0x00, 0x0f }, + { SYS_DVBS2, PSK_8, FEC_8_9, 0x00, 0x10 }, + { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 }, + /* + * `val' can be found in the FECSTATUS register when tuning. + * FECSTATUS will give the actual FEC in use if tuning was successful. + */ +}; + +static int cx24116_lookup_fecmod(struct cx24116_state *state, + fe_modulation_t m, fe_code_rate_t f) +{ + int i, ret = -EOPNOTSUPP; + + dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f); + + for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) { + if ((m == CX24116_MODFEC_MODES[i].modulation) && + (f == CX24116_MODFEC_MODES[i].fec)) { + ret = i; + break; + } + } + + return ret; +} + +static int cx24116_set_fec(struct cx24116_state *state, + fe_modulation_t mod, fe_code_rate_t fec) +{ + int ret = 0; + + dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec); + + ret = cx24116_lookup_fecmod(state, mod, fec); + + if (ret < 0) + return ret; + + state->dnxt.fec = fec; + state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val; + state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask; + dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__, + state->dnxt.fec_mask, state->dnxt.fec_val); + + return 0; +} + +static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate) +{ + dprintk("%s(%d)\n", __func__, rate); + + /* check if symbol rate is within limits */ + if ((rate > state->frontend.ops.info.symbol_rate_max) || + (rate < state->frontend.ops.info.symbol_rate_min)) { + dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate); + return -EOPNOTSUPP; + } + + state->dnxt.symbol_rate = rate; + dprintk("%s() symbol_rate = %d\n", __func__, rate); + + return 0; +} + +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw); + +static int cx24116_firmware_ondemand(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + const struct firmware *fw; + int ret = 0; + + dprintk("%s()\n", __func__); + + if (cx24116_readreg(state, 0x20) > 0) { + + if (state->skip_fw_load) + return 0; + + /* Load firmware */ + /* request the firmware, this will block until loaded */ + printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", + __func__, CX24116_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, + &state->i2c->dev); + printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", + __func__); + if (ret) { + printk(KERN_ERR "%s: No firmware uploaded " + "(timeout or file not found?)\n", __func__); + return ret; + } + + /* Make sure we don't recurse back through here + * during loading */ + state->skip_fw_load = 1; + + ret = cx24116_load_firmware(fe, fw); + if (ret) + printk(KERN_ERR "%s: Writing firmware to device failed\n", + __func__); + + release_firmware(fw); + + printk(KERN_INFO "%s: Firmware upload %s\n", __func__, + ret == 0 ? "complete" : "failed"); + + /* Ensure firmware is always loaded if required */ + state->skip_fw_load = 0; + } + + return ret; +} + +/* Take a basic firmware command structure, format it + * and forward it for processing + */ +static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i, ret; + + dprintk("%s()\n", __func__); + + /* Load the firmware if required */ + ret = cx24116_firmware_ondemand(fe); + if (ret != 0) { + printk(KERN_ERR "%s(): Unable initialise the firmware\n", + __func__); + return ret; + } + + /* Write the command */ + for (i = 0; i < cmd->len ; i++) { + dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]); + cx24116_writereg(state, i, cmd->args[i]); + } + + /* Start execution and wait for cmd to terminate */ + cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01); + while (cx24116_readreg(state, CX24116_REG_EXECUTE)) { + msleep(10); + if (i++ > 64) { + /* Avoid looping forever if the firmware does + not respond */ + printk(KERN_WARNING "%s() Firmware not responding\n", + __func__); + return -EREMOTEIO; + } + } + return 0; +} + +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int i, ret; + unsigned char vers[4]; + + dprintk("%s\n", __func__); + dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", + fw->size, + fw->data[0], + fw->data[1], + fw->data[fw->size-2], + fw->data[fw->size-1]); + + /* Toggle 88x SRST pin to reset demod */ + if (state->config->reset_device) + state->config->reset_device(fe); + + /* Begin the firmware load process */ + /* Prepare the demod, load the firmware, cleanup after load */ + + /* Init PLL */ + cx24116_writereg(state, 0xE5, 0x00); + cx24116_writereg(state, 0xF1, 0x08); + cx24116_writereg(state, 0xF2, 0x13); + + /* Start PLL */ + cx24116_writereg(state, 0xe0, 0x03); + cx24116_writereg(state, 0xe0, 0x00); + + /* Unknown */ + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); + + /* Unknown */ + cx24116_writereg(state, 0xF0, 0x03); + cx24116_writereg(state, 0xF4, 0x81); + cx24116_writereg(state, 0xF5, 0x00); + cx24116_writereg(state, 0xF6, 0x00); + + /* write the entire firmware as one transaction */ + cx24116_writeregN(state, 0xF7, fw->data, fw->size); + + cx24116_writereg(state, 0xF4, 0x10); + cx24116_writereg(state, 0xF0, 0x00); + cx24116_writereg(state, 0xF8, 0x06); + + /* Firmware CMD 10: VCO config */ + cmd.args[0x00] = CMD_SET_VCO; + cmd.args[0x01] = 0x05; + cmd.args[0x02] = 0xdc; + cmd.args[0x03] = 0xda; + cmd.args[0x04] = 0xae; + cmd.args[0x05] = 0xaa; + cmd.args[0x06] = 0x04; + cmd.args[0x07] = 0x9d; + cmd.args[0x08] = 0xfc; + cmd.args[0x09] = 0x06; + cmd.len = 0x0a; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00); + + /* Firmware CMD 14: Tuner config */ + cmd.args[0x00] = CMD_TUNERINIT; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x00; + cmd.len = 0x03; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + cx24116_writereg(state, 0xe5, 0x00); + + /* Firmware CMD 13: MPEG config */ + cmd.args[0x00] = CMD_MPEGCONFIG; + cmd.args[0x01] = 0x01; + cmd.args[0x02] = 0x75; + cmd.args[0x03] = 0x00; + if (state->config->mpg_clk_pos_pol) + cmd.args[0x04] = state->config->mpg_clk_pos_pol; + else + cmd.args[0x04] = 0x02; + cmd.args[0x05] = 0x00; + cmd.len = 0x06; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Firmware CMD 35: Get firmware version */ + cmd.args[0x00] = CMD_UPDFWVERS; + cmd.len = 0x02; + for (i = 0; i < 4; i++) { + cmd.args[0x01] = i; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX); + } + printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__, + vers[0], vers[1], vers[2], vers[3]); + + return 0; +} + +static int cx24116_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + /* The isl6421 module will override this function in the fops. */ + dprintk("%s() This should never appear if the isl6421 module " + "is loaded correctly\n", __func__); + + return -EOPNOTSUPP; +} + +static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct cx24116_state *state = fe->demodulator_priv; + + int lock = cx24116_readreg(state, CX24116_REG_SSTATUS); + + dprintk("%s: status = 0x%02x\n", __func__, lock); + + *status = 0; + + if (lock & CX24116_HAS_SIGNAL) + *status |= FE_HAS_SIGNAL; + if (lock & CX24116_HAS_CARRIER) + *status |= FE_HAS_CARRIER; + if (lock & CX24116_HAS_VITERBI) + *status |= FE_HAS_VITERBI; + if (lock & CX24116_HAS_SYNCLOCK) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + + return 0; +} + +static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *ber = (cx24116_readreg(state, CX24116_REG_BER24) << 24) | + (cx24116_readreg(state, CX24116_REG_BER16) << 16) | + (cx24116_readreg(state, CX24116_REG_BER8) << 8) | + cx24116_readreg(state, CX24116_REG_BER0); + + return 0; +} + +/* TODO Determine function and scale appropriately */ +static int cx24116_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + u16 sig_reading; + + dprintk("%s()\n", __func__); + + /* Firmware CMD 19: Get AGC */ + cmd.args[0x00] = CMD_GETAGC; + cmd.len = 0x01; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + sig_reading = + (cx24116_readreg(state, + CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) | + (cx24116_readreg(state, CX24116_REG_SIGNAL) << 6); + *signal_strength = 0 - sig_reading; + + dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", + __func__, sig_reading, *signal_strength); + + return 0; +} + +/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ +static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr) +{ + struct cx24116_state *state = fe->demodulator_priv; + u8 snr_reading; + static const u32 snr_tab[] = { /* 10 x Table (rounded up) */ + 0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667, + 0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667, + 0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667, + 0x18000 }; + + dprintk("%s()\n", __func__); + + snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0); + + if (snr_reading >= 0xa0 /* 100% */) + *snr = 0xffff; + else + *snr = snr_tab[(snr_reading & 0xf0) >> 4] + + (snr_tab[(snr_reading & 0x0f)] >> 4); + + dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, + snr_reading, *snr); + + return 0; +} + +/* The reelbox patches show the value in the registers represents + * ESNO, from 0->30db (values 0->300). We provide this value by + * default. + */ +static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 | + cx24116_readreg(state, CX24116_REG_QUALITY0); + + dprintk("%s: raw 0x%04x\n", __func__, *snr); + + return 0; +} + +static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + if (esno_snr == 1) + return cx24116_read_snr_esno(fe, snr); + else + return cx24116_read_snr_pct(fe, snr); +} + +static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) | + cx24116_readreg(state, CX24116_REG_UCB0); + + return 0; +} + +/* Overwrite the current tuning params, we are about to tune */ +static void cx24116_clone_params(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); +} + +/* Wait for LNB */ +static int cx24116_wait_for_lnb(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i; + + dprintk("%s() qstatus = 0x%02x\n", __func__, + cx24116_readreg(state, CX24116_REG_QSTATUS)); + + /* Wait for up to 300 ms */ + for (i = 0; i < 30 ; i++) { + if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20) + return 0; + msleep(10); + } + + dprintk("%s(): LNB not ready\n", __func__); + + return -ETIMEDOUT; /* -EBUSY ? */ +} + +static int cx24116_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) +{ + struct cx24116_cmd cmd; + int ret; + + dprintk("%s(%d)\n", __func__, tone); + if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { + printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); + return -EINVAL; + } + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Min delay time after DiSEqC send */ + msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ + + /* This is always done before the tone is set */ + cmd.args[0x00] = CMD_SET_TONEPRE; + cmd.args[0x01] = 0x00; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Now we set the tone */ + cmd.args[0x00] = CMD_SET_TONE; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x00; + + switch (tone) { + case SEC_TONE_ON: + dprintk("%s: setting tone on\n", __func__); + cmd.args[0x03] = 0x01; + break; + case SEC_TONE_OFF: + dprintk("%s: setting tone off\n", __func__); + cmd.args[0x03] = 0x00; + break; + } + cmd.len = 0x04; + + /* Min delay time before DiSEqC send */ + msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ + + return cx24116_cmd_execute(fe, &cmd); +} + +/* Initialise DiSEqC */ +static int cx24116_diseqc_init(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + /* Firmware CMD 20: LNB/DiSEqC config */ + cmd.args[0x00] = CMD_LNBCONFIG; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x10; + cmd.args[0x03] = 0x00; + cmd.args[0x04] = 0x8f; + cmd.args[0x05] = 0x28; + cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01; + cmd.args[0x07] = 0x01; + cmd.len = 0x08; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Prepare a DiSEqC command */ + state->dsec_cmd.args[0x00] = CMD_LNBSEND; + + /* DiSEqC burst */ + state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; + + /* Unknown */ + state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; + state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; + /* Continuation flag? */ + state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; + + /* DiSEqC message length */ + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; + + /* Command length */ + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS; + + return 0; +} + +/* Send DiSEqC message with derived burst (hack) || previous burst */ +static int cx24116_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *d) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i, ret; + + /* Dump DiSEqC message */ + if (debug) { + printk(KERN_INFO "cx24116: %s(", __func__); + for (i = 0 ; i < d->msg_len ;) { + printk(KERN_INFO "0x%02x", d->msg[i]); + if (++i < d->msg_len) + printk(KERN_INFO ", "); + } + printk(") toneburst=%d\n", toneburst); + } + + /* Validate length */ + if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) + return -EINVAL; + + /* DiSEqC message */ + for (i = 0; i < d->msg_len; i++) + state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i]; + + /* DiSEqC message length */ + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; + + /* Command length */ + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS + + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; + + /* DiSEqC toneburst */ + if (toneburst == CX24116_DISEQC_MESGCACHE) + /* Message is cached */ + return 0; + + else if (toneburst == CX24116_DISEQC_TONEOFF) + /* Message is sent without burst */ + state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0; + + else if (toneburst == CX24116_DISEQC_TONECACHE) { + /* + * Message is sent with derived else cached burst + * + * WRITE PORT GROUP COMMAND 38 + * + * 0/A/A: E0 10 38 F0..F3 + * 1/B/B: E0 10 38 F4..F7 + * 2/C/A: E0 10 38 F8..FB + * 3/D/B: E0 10 38 FC..FF + * + * databyte[3]= 8421:8421 + * ABCD:WXYZ + * CLR :SET + * + * WX= PORT SELECT 0..3 (X=TONEBURST) + * Y = VOLTAGE (0=13V, 1=18V) + * Z = BAND (0=LOW, 1=HIGH(22K)) + */ + if (d->msg_len >= 4 && d->msg[2] == 0x38) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + ((d->msg[3] & 4) >> 2); + if (debug) + dprintk("%s burst=%d\n", __func__, + state->dsec_cmd.args[CX24116_DISEQC_BURST]); + } + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Wait for voltage/min repeat delay */ + msleep(100); + + /* Command */ + ret = cx24116_cmd_execute(fe, &state->dsec_cmd); + if (ret != 0) + return ret; + /* + * Wait for send + * + * Eutelsat spec: + * >15ms delay + (XXX determine if FW does this, see set_tone) + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay (XXX determine if FW does this, see set_tone) + */ + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60)); + + return 0; +} + +/* Send DiSEqC burst */ +static int cx24116_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct cx24116_state *state = fe->demodulator_priv; + int ret; + + dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst); + + /* DiSEqC burst */ + if (burst == SEC_MINI_A) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_A; + else if (burst == SEC_MINI_B) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_B; + else + return -EINVAL; + + /* DiSEqC toneburst */ + if (toneburst != CX24116_DISEQC_MESGCACHE) + /* Burst is cached */ + return 0; + + /* Burst is to be sent with cached message */ + + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if (ret != 0) + return ret; + + /* Wait for voltage/min repeat delay */ + msleep(100); + + /* Command */ + ret = cx24116_cmd_execute(fe, &state->dsec_cmd); + if (ret != 0) + return ret; + + /* + * Wait for send + * + * Eutelsat spec: + * >15ms delay + (XXX determine if FW does this, see set_tone) + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay (XXX determine if FW does this, see set_tone) + */ + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60); + + return 0; +} + +static void cx24116_release(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s\n", __func__); + kfree(state); +} + +static struct dvb_frontend_ops cx24116_ops; + +struct dvb_frontend *cx24116_attach(const struct cx24116_config *config, + struct i2c_adapter *i2c) +{ + struct cx24116_state *state = NULL; + int ret; + + dprintk("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL); + if (state == NULL) + goto error1; + + /* setup the state */ + memset(state, 0, sizeof(struct cx24116_state)); + + state->config = config; + state->i2c = i2c; + + /* check if the demod is present */ + ret = (cx24116_readreg(state, 0xFF) << 8) | + cx24116_readreg(state, 0xFE); + if (ret != 0x0501) { + printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n"); + goto error2; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx24116_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error2: kfree(state); +error1: return NULL; +} +EXPORT_SYMBOL(cx24116_attach); + +/* + * Initialise or wake up device + * + * Power config will reset and load initial firmware if required + */ +static int cx24116_initfe(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + dprintk("%s()\n", __func__); + + /* Power on */ + cx24116_writereg(state, 0xe0, 0); + cx24116_writereg(state, 0xe1, 0); + cx24116_writereg(state, 0xea, 0); + + /* Firmware CMD 36: Power config */ + cmd.args[0x00] = CMD_TUNERSLEEP; + cmd.args[0x01] = 0; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + return cx24116_diseqc_init(fe); +} + +/* + * Put device to sleep + */ +static int cx24116_sleep(struct dvb_frontend *fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + dprintk("%s()\n", __func__); + + /* Firmware CMD 36: Power config */ + cmd.args[0x00] = CMD_TUNERSLEEP; + cmd.args[0x01] = 1; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Power off (Shutdown clocks) */ + cx24116_writereg(state, 0xea, 0xff); + cx24116_writereg(state, 0xe1, 1); + cx24116_writereg(state, 0xe0, 1); + + return 0; +} + +static int cx24116_set_property(struct dvb_frontend *fe, + struct dtv_property *tvp) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int cx24116_get_property(struct dvb_frontend *fe, + struct dtv_property *tvp) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +/* dvb-core told us to tune, the tv property cache will be complete, + * it's safe for is to pull values and use them for tuning purposes. + */ +static int cx24116_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct cx24116_cmd cmd; + fe_status_t tunerstat; + int i, status, ret, retune; + + dprintk("%s()\n", __func__); + + switch (c->delivery_system) { + case SYS_DVBS: + dprintk("%s: DVB-S delivery system selected\n", __func__); + + /* Only QPSK is supported for DVB-S */ + if (c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + /* Pilot doesn't exist in DVB-S, turn bit off */ + state->dnxt.pilot_val = CX24116_PILOT_OFF; + retune = 1; + + /* DVB-S only supports 0.35 */ + if (c->rolloff != ROLLOFF_35) { + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; + + case SYS_DVBS2: + dprintk("%s: DVB-S2 delivery system selected\n", __func__); + + /* + * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, + * but not hardware auto detection + */ + if (c->modulation != PSK_8 && c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + switch (c->pilot) { + case PILOT_AUTO: /* Not supported but emulated */ + state->dnxt.pilot_val = (c->modulation == QPSK) + ? CX24116_PILOT_OFF : CX24116_PILOT_ON; + retune = 2; + break; + case PILOT_OFF: + state->dnxt.pilot_val = CX24116_PILOT_OFF; + break; + case PILOT_ON: + state->dnxt.pilot_val = CX24116_PILOT_ON; + break; + default: + dprintk("%s: unsupported pilot mode selected (%d)\n", + __func__, c->pilot); + return -EOPNOTSUPP; + } + + switch (c->rolloff) { + case ROLLOFF_20: + state->dnxt.rolloff_val = CX24116_ROLLOFF_020; + break; + case ROLLOFF_25: + state->dnxt.rolloff_val = CX24116_ROLLOFF_025; + break; + case ROLLOFF_35: + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; + case ROLLOFF_AUTO: /* Rolloff must be explicit */ + default: + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } + break; + + default: + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + state->dnxt.modulation = c->modulation; + state->dnxt.frequency = c->frequency; + state->dnxt.pilot = c->pilot; + state->dnxt.rolloff = c->rolloff; + + ret = cx24116_set_inversion(state, c->inversion); + if (ret != 0) + return ret; + + /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */ + ret = cx24116_set_fec(state, c->modulation, c->fec_inner); + if (ret != 0) + return ret; + + ret = cx24116_set_symbolrate(state, c->symbol_rate); + if (ret != 0) + return ret; + + /* discard the 'current' tuning parameters and prepare to tune */ + cx24116_clone_params(fe); + + dprintk("%s: modulation = %d\n", __func__, state->dcur.modulation); + dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency); + dprintk("%s: pilot = %d (val = 0x%02x)\n", __func__, + state->dcur.pilot, state->dcur.pilot_val); + dprintk("%s: retune = %d\n", __func__, retune); + dprintk("%s: rolloff = %d (val = 0x%02x)\n", __func__, + state->dcur.rolloff, state->dcur.rolloff_val); + dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); + dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, + state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); + dprintk("%s: Inversion = %d (val = 0x%02x)\n", __func__, + state->dcur.inversion, state->dcur.inversion_val); + + /* This is also done in advise/acquire on HVR4000 but not on LITE */ + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* Set/Reset B/W */ + cmd.args[0x00] = CMD_BANDWIDTH; + cmd.args[0x01] = 0x01; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Prepare a tune request */ + cmd.args[0x00] = CMD_TUNEREQUEST; + + /* Frequency */ + cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16; + cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8; + cmd.args[0x03] = (state->dcur.frequency & 0x0000ff); + + /* Symbol Rate */ + cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8; + cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff); + + /* Automatic Inversion */ + cmd.args[0x06] = state->dcur.inversion_val; + + /* Modulation / FEC / Pilot */ + cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val; + + cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8; + cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff; + cmd.args[0x0a] = 0x00; + cmd.args[0x0b] = 0x00; + cmd.args[0x0c] = state->dcur.rolloff_val; + cmd.args[0x0d] = state->dcur.fec_mask; + + if (state->dcur.symbol_rate > 30000000) { + cmd.args[0x0e] = 0x04; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x01; + cmd.args[0x11] = 0x77; + cmd.args[0x12] = 0x36; + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01); + } else { + cmd.args[0x0e] = 0x06; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x00; + cmd.args[0x11] = 0xFA; + cmd.args[0x12] = 0x24; + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); + } + + cmd.len = 0x13; + + /* We need to support pilot and non-pilot tuning in the + * driver automatically. This is a workaround for because + * the demod does not support autodetect. + */ + do { + /* Reset status register */ + status = cx24116_readreg(state, CX24116_REG_SSTATUS) + & CX24116_SIGNAL_MASK; + cx24116_writereg(state, CX24116_REG_SSTATUS, status); + + /* Tune */ + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + break; + + /* + * Wait for up to 500 ms before retrying + * + * If we are able to tune then generally it occurs within 100ms. + * If it takes longer, try a different toneburst setting. + */ + for (i = 0; i < 50 ; i++) { + cx24116_read_status(fe, &tunerstat); + status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); + if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { + dprintk("%s: Tuned\n", __func__); + goto tuned; + } + msleep(10); + } + + dprintk("%s: Not tuned\n", __func__); + + /* Toggle pilot bit when in auto-pilot */ + if (state->dcur.pilot == PILOT_AUTO) + cmd.args[0x07] ^= CX24116_PILOT_ON; + } while (--retune); + +tuned: /* Set/Reset B/W */ + cmd.args[0x00] = CMD_BANDWIDTH; + cmd.args[0x01] = 0x00; + cmd.len = 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + return ret; +} + +static struct dvb_frontend_ops cx24116_ops = { + + .info = { + .name = "Conexant CX24116/CX24118", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1011, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_RECOVER + }, + + .release = cx24116_release, + + .init = cx24116_initfe, + .sleep = cx24116_sleep, + .read_status = cx24116_read_status, + .read_ber = cx24116_read_ber, + .read_signal_strength = cx24116_read_signal_strength, + .read_snr = cx24116_read_snr, + .read_ucblocks = cx24116_read_ucblocks, + .set_tone = cx24116_set_tone, + .set_voltage = cx24116_set_voltage, + .diseqc_send_master_cmd = cx24116_send_diseqc_msg, + .diseqc_send_burst = cx24116_diseqc_send_burst, + + .set_property = cx24116_set_property, + .get_property = cx24116_get_property, + .set_frontend = cx24116_set_frontend, +}; + +MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb/frontends/cx24116.h new file mode 100644 index 00000000000..4cb3ddd6c62 --- /dev/null +++ b/drivers/media/dvb/frontends/cx24116.h @@ -0,0 +1,54 @@ +/* + Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver + + Copyright (C) 2006 Steven Toth <stoth@linuxtv.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef CX24116_H +#define CX24116_H + +#include <linux/dvb/frontend.h> + +struct cx24116_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); + + /* Need to reset device during firmware loading */ + int (*reset_device)(struct dvb_frontend *fe); + + /* Need to set MPEG parameters */ + u8 mpg_clk_pos_pol:0x02; +}; + +#if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE) +extern struct dvb_frontend *cx24116_attach( + const struct cx24116_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *cx24116_attach( + const struct cx24116_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* CX24116_H */ diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index 7156157cb34..1a8c36f7606 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -33,7 +33,13 @@ #define XTAL 10111000 static int force_band; +module_param(force_band, int, 0644); +MODULE_PARM_DESC(force_band, "Force a specific band select "\ + "(1-9, default:off)."); + static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); #define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0) #define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0) @@ -46,10 +52,9 @@ static int debug; } \ } while (0) -struct cx24123_state -{ - struct i2c_adapter* i2c; - const struct cx24123_config* config; +struct cx24123_state { + struct i2c_adapter *i2c; + const struct cx24123_config *config; struct dvb_frontend frontend; @@ -70,8 +75,7 @@ struct cx24123_state }; /* Various tuner defaults need to be established for a given symbol rate Sps */ -static struct -{ +static struct cx24123_AGC_val { u32 symbolrate_low; u32 symbolrate_high; u32 VCAprogdata; @@ -109,8 +113,7 @@ static struct * fixme: The bounds on the bands do not match the doc in real life. * fixme: Some of them have been moved, other might need adjustment. */ -static struct -{ +static struct cx24123_bandselect_val { u32 freq_low; u32 freq_high; u32 VCOdivider; @@ -249,7 +252,8 @@ static int cx24123_i2c_writereg(struct cx24123_state *state, /* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */ - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { printk("%s: writereg error(err == %i, reg == 0x%02x," " data == 0x%02x)\n", __func__, err, reg, data); return err; @@ -284,7 +288,8 @@ static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg) #define cx24123_writereg(state, reg, val) \ cx24123_i2c_writereg(state, state->config->demod_address, reg, val) -static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion) +static int cx24123_set_inversion(struct cx24123_state *state, + fe_spectral_inversion_t inversion) { u8 nom_reg = cx24123_readreg(state, 0x0e); u8 auto_reg = cx24123_readreg(state, 0x10); @@ -311,7 +316,8 @@ static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_invers return 0; } -static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_inversion_t *inversion) +static int cx24123_get_inversion(struct cx24123_state *state, + fe_spectral_inversion_t *inversion) { u8 val; @@ -328,18 +334,20 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers return 0; } -static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) +static int cx24123_set_fec(struct cx24123_state *state, fe_code_rate_t fec) { u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07; - if ( (fec < FEC_NONE) || (fec > FEC_AUTO) ) + if ((fec < FEC_NONE) || (fec > FEC_AUTO)) fec = FEC_AUTO; /* Set the soft decision threshold */ - if(fec == FEC_1_2) - cx24123_writereg(state, 0x43, cx24123_readreg(state, 0x43) | 0x01); + if (fec == FEC_1_2) + cx24123_writereg(state, 0x43, + cx24123_readreg(state, 0x43) | 0x01); else - cx24123_writereg(state, 0x43, cx24123_readreg(state, 0x43) & ~0x01); + cx24123_writereg(state, 0x43, + cx24123_readreg(state, 0x43) & ~0x01); switch (fec) { case FEC_1_2: @@ -388,11 +396,11 @@ static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) return 0; } -static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec) +static int cx24123_get_fec(struct cx24123_state *state, fe_code_rate_t *fec) { int ret; - ret = cx24123_readreg (state, 0x1b); + ret = cx24123_readreg(state, 0x1b); if (ret < 0) return ret; ret = ret & 0x07; @@ -433,16 +441,16 @@ static u32 cx24123_int_log2(u32 a, u32 b) { u32 exp, nearest = 0; u32 div = a / b; - if(a % b >= b / 2) ++div; - if(div < (1 << 31)) - { - for(exp = 1; div > exp; nearest++) + if (a % b >= b / 2) + ++div; + if (div < (1 << 31)) { + for (exp = 1; div > exp; nearest++) exp += exp; } return nearest; } -static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) +static int cx24123_set_symbolrate(struct cx24123_state *state, u32 srate) { u32 tmp, sample_rate, ratio, sample_gain; u8 pll_mult; @@ -498,9 +506,9 @@ static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) cx24123_writereg(state, 0x01, pll_mult * 6); - cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f ); - cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff ); - cx24123_writereg(state, 0x0a, (ratio ) & 0xff ); + cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f); + cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff); + cx24123_writereg(state, 0x0a, ratio & 0xff); /* also set the demodulator sample gain */ sample_gain = cx24123_int_log2(sample_rate, srate); @@ -514,10 +522,12 @@ static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) } /* - * Based on the required frequency and symbolrate, the tuner AGC has to be configured - * and the correct band selected. Calculate those values + * Based on the required frequency and symbolrate, the tuner AGC has + * to be configured and the correct band selected. + * Calculate those values. */ -static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_pll_calculate(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; u32 ndiv = 0, adiv = 0, vco_div = 0; @@ -525,6 +535,8 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa int pump = 2; int band = 0; int num_bands = ARRAY_SIZE(cx24123_bandselect_vals); + struct cx24123_bandselect_val *bsv = NULL; + struct cx24123_AGC_val *agcv = NULL; /* Defaults for low freq, low rate */ state->VCAarg = cx24123_AGC_vals[0].VCAprogdata; @@ -532,58 +544,65 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa state->bandselectarg = cx24123_bandselect_vals[0].progdata; vco_div = cx24123_bandselect_vals[0].VCOdivider; - /* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */ - for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) - { - if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) && - (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) { - state->VCAarg = cx24123_AGC_vals[i].VCAprogdata; - state->VGAarg = cx24123_AGC_vals[i].VGAprogdata; - state->FILTune = cx24123_AGC_vals[i].FILTune; + /* For the given symbol rate, determine the VCA, VGA and + * FILTUNE programming bits */ + for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) { + agcv = &cx24123_AGC_vals[i]; + if ((agcv->symbolrate_low <= p->u.qpsk.symbol_rate) && + (agcv->symbolrate_high >= p->u.qpsk.symbol_rate)) { + state->VCAarg = agcv->VCAprogdata; + state->VGAarg = agcv->VGAprogdata; + state->FILTune = agcv->FILTune; } } /* determine the band to use */ - if(force_band < 1 || force_band > num_bands) - { - for (i = 0; i < num_bands; i++) - { - if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) && - (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) + if (force_band < 1 || force_band > num_bands) { + for (i = 0; i < num_bands; i++) { + bsv = &cx24123_bandselect_vals[i]; + if ((bsv->freq_low <= p->frequency) && + (bsv->freq_high >= p->frequency)) band = i; } - } - else + } else band = force_band - 1; state->bandselectarg = cx24123_bandselect_vals[band].progdata; vco_div = cx24123_bandselect_vals[band].VCOdivider; /* determine the charge pump current */ - if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 ) + if (p->frequency < (cx24123_bandselect_vals[band].freq_low + + cx24123_bandselect_vals[band].freq_high) / 2) pump = 0x01; else pump = 0x02; /* Determine the N/A dividers for the requested lband freq (in kHz). */ - /* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */ - ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff; - adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f; + /* Note: the reference divider R=10, frequency is in KHz, + * XTAL is in Hz */ + ndiv = (((p->frequency * vco_div * 10) / + (2 * XTAL / 1000)) / 32) & 0x1ff; + adiv = (((p->frequency * vco_div * 10) / + (2 * XTAL / 1000)) % 32) & 0x1f; if (adiv == 0 && ndiv > 0) ndiv--; - /* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */ - state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv; + /* control bits 11, refdiv 11, charge pump polarity 1, + * charge pump current, ndiv, adiv */ + state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | + (pump << 14) | (ndiv << 5) | adiv; return 0; } /* * Tuner data is 21 bits long, must be left-aligned in data. - * Tuner cx24109 is written through a dedicated 3wire interface on the demod chip. + * Tuner cx24109 is written through a dedicated 3wire interface + * on the demod chip. */ -static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_parameters *p, u32 data) +static int cx24123_pll_writereg(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p, u32 data) { struct cx24123_state *state = fe->demodulator_priv; unsigned long timeout; @@ -610,7 +629,7 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par /* send another 8 bytes, wait for the send to be completed */ timeout = jiffies + msecs_to_jiffies(40); - cx24123_writereg(state, 0x22, (data>>8) & 0xff ); + cx24123_writereg(state, 0x22, (data >> 8) & 0xff); while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { if (time_after(jiffies, timeout)) { err("%s: demodulator is not responding, "\ @@ -620,9 +639,10 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par msleep(10); } - /* send the lower 5 bits of this byte, padded with 3 LBB, wait for the send to be completed */ + /* send the lower 5 bits of this byte, padded with 3 LBB, + * wait for the send to be completed */ timeout = jiffies + msecs_to_jiffies(40); - cx24123_writereg(state, 0x22, (data) & 0xff ); + cx24123_writereg(state, 0x22, (data) & 0xff); while ((cx24123_readreg(state, 0x20) & 0x80)) { if (time_after(jiffies, timeout)) { err("%s: demodulator is not responding," \ @@ -639,7 +659,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par return 0; } -static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_pll_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; u8 val; @@ -690,7 +711,7 @@ static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start) return cx24123_writereg(state, 0x23, r); } -static int cx24123_initfe(struct dvb_frontend* fe) +static int cx24123_initfe(struct dvb_frontend *fe) { struct cx24123_state *state = fe->demodulator_priv; int i; @@ -699,19 +720,22 @@ static int cx24123_initfe(struct dvb_frontend* fe) /* Configure the demod to a good set of defaults */ for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++) - cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data); + cx24123_writereg(state, cx24123_regdata[i].reg, + cx24123_regdata[i].data); /* Set the LNB polarity */ - if(state->config->lnb_polarity) - cx24123_writereg(state, 0x32, cx24123_readreg(state, 0x32) | 0x02); + if (state->config->lnb_polarity) + cx24123_writereg(state, 0x32, + cx24123_readreg(state, 0x32) | 0x02); if (state->config->dont_use_pll) - cx24123_repeater_mode(state, 1, 0); + cx24123_repeater_mode(state, 1, 0); return 0; } -static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +static int cx24123_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) { struct cx24123_state *state = fe->demodulator_priv; u8 val; @@ -740,7 +764,7 @@ static void cx24123_wait_for_diseqc(struct cx24123_state *state) { unsigned long timeout = jiffies + msecs_to_jiffies(200); while (!(cx24123_readreg(state, 0x29) & 0x40)) { - if(time_after(jiffies, timeout)) { + if (time_after(jiffies, timeout)) { err("%s: diseqc queue not ready, " \ "command may be lost.\n", __func__); break; @@ -749,7 +773,8 @@ static void cx24123_wait_for_diseqc(struct cx24123_state *state) } } -static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd) +static int cx24123_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) { struct cx24123_state *state = fe->demodulator_priv; int i, val, tone; @@ -771,20 +796,21 @@ static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma cx24123_writereg(state, 0x2C + i, cmd->msg[i]); val = cx24123_readreg(state, 0x29); - cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3)); + cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | + ((cmd->msg_len-3) & 3)); /* wait for diseqc message to finish sending */ cx24123_wait_for_diseqc(state); /* restart continuous tone if enabled */ - if (tone & 0x10) { + if (tone & 0x10) cx24123_writereg(state, 0x29, tone & ~0x40); - } return 0; } -static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +static int cx24123_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) { struct cx24123_state *state = fe->demodulator_priv; int val, tone; @@ -814,13 +840,13 @@ static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb); /* restart continuous tone if enabled */ - if (tone & 0x10) { + if (tone & 0x10) cx24123_writereg(state, 0x29, tone & ~0x40); - } + return 0; } -static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int cx24123_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct cx24123_state *state = fe->demodulator_priv; int sync = cx24123_readreg(state, 0x14); @@ -853,8 +879,9 @@ static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) } /* - * Configured to return the measurement of errors in blocks, because no UCBLOCKS value - * is available, so this value doubles up to satisfy both measurements + * Configured to return the measurement of errors in blocks, + * because no UCBLOCKS value is available, so this value doubles up + * to satisfy both measurements. */ static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber) { @@ -876,7 +903,8 @@ static int cx24123_read_signal_strength(struct dvb_frontend *fe, { struct cx24123_state *state = fe->demodulator_priv; - *signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */ + /* larger = better */ + *signal_strength = cx24123_readreg(state, 0x3b) << 8; dprintk("Signal strength = %d\n", *signal_strength); @@ -907,7 +935,7 @@ static int cx24123_set_frontend(struct dvb_frontend *fe, if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); - state->currentfreq=p->frequency; + state->currentfreq = p->frequency; state->currentsymbolrate = p->u.qpsk.symbol_rate; cx24123_set_inversion(state, p->inversion); @@ -932,7 +960,8 @@ static int cx24123_set_frontend(struct dvb_frontend *fe, return 0; } -static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; @@ -952,7 +981,7 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par return 0; } -static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +static int cx24123_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { struct cx24123_state *state = fe->demodulator_priv; u8 val; @@ -977,8 +1006,8 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) return 0; } -static int cx24123_tune(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params, +static int cx24123_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, unsigned int mode_flags, unsigned int *delay, fe_status_t *status) @@ -997,12 +1026,12 @@ static int cx24123_tune(struct dvb_frontend* fe, static int cx24123_get_algo(struct dvb_frontend *fe) { - return 1; //FE_ALGO_HW + return 1; /* FE_ALGO_HW */ } -static void cx24123_release(struct dvb_frontend* fe) +static void cx24123_release(struct dvb_frontend *fe) { - struct cx24123_state* state = fe->demodulator_priv; + struct cx24123_state *state = fe->demodulator_priv; dprintk("\n"); i2c_del_adapter(&state->tuner_i2c_adapter); kfree(state); @@ -1013,7 +1042,7 @@ static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, { struct cx24123_state *state = i2c_get_adapdata(i2c_adap); /* this repeater closes after the first stop */ - cx24123_repeater_mode(state, 1, 1); + cx24123_repeater_mode(state, 1, 1); return i2c_transfer(state->i2c, msg, num); } @@ -1037,8 +1066,8 @@ EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter); static struct dvb_frontend_ops cx24123_ops; -struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, + struct i2c_adapter *i2c) { struct cx24123_state *state = kzalloc(sizeof(struct cx24123_state), GFP_KERNEL); @@ -1057,20 +1086,25 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, /* check if the demod is there */ state->demod_rev = cx24123_readreg(state, 0x00); switch (state->demod_rev) { - case 0xe1: info("detected CX24123C\n"); break; - case 0xd1: info("detected CX24123\n"); break; + case 0xe1: + info("detected CX24123C\n"); + break; + case 0xd1: + info("detected CX24123\n"); + break; default: err("wrong demod revision: %x\n", state->demod_rev); goto error; } /* create dvb_frontend */ - memcpy(&state->frontend.ops, &cx24123_ops, sizeof(struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &cx24123_ops, + sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; - /* create tuner i2c adapter */ - if (config->dont_use_pll) - cx24123_repeater_mode(state, 1, 0); + /* create tuner i2c adapter */ + if (config->dont_use_pll) + cx24123_repeater_mode(state, 1, 0); strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus", sizeof(state->tuner_i2c_adapter.name)); @@ -1079,7 +1113,7 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, state->tuner_i2c_adapter.algo_data = NULL; i2c_set_adapdata(&state->tuner_i2c_adapter, state); if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { - err("tuner i2c bus could not be initialized\n"); + err("tuner i2c bus could not be initialized\n"); goto error; } @@ -1090,6 +1124,7 @@ error: return NULL; } +EXPORT_SYMBOL(cx24123_attach); static struct dvb_frontend_ops cx24123_ops = { @@ -1126,15 +1161,8 @@ static struct dvb_frontend_ops cx24123_ops = { .get_frontend_algo = cx24123_get_algo, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); - -module_param(force_band, int, 0644); -MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off)."); - MODULE_DESCRIPTION("DVB Frontend module for Conexant " \ "CX24123/CX24109/CX24113 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(cx24123_attach); diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h index cc6b411d6d2..51ae866e9fe 100644 --- a/drivers/media/dvb/frontends/cx24123.h +++ b/drivers/media/dvb/frontends/cx24123.h @@ -23,13 +23,12 @@ #include <linux/dvb/frontend.h> -struct cx24123_config -{ +struct cx24123_config { /* the demodulator's i2c address */ u8 demod_address; /* Need to set device param for start_dma */ - int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); /* 0 = LNB voltage normal, 1 = LNB voltage inverted */ int lnb_polarity; @@ -39,7 +38,8 @@ struct cx24123_config void (*agc_callback) (struct dvb_frontend *); }; -#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE)) +#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) \ + && defined(MODULE)) extern struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, struct i2c_adapter *i2c); extern struct i2c_adapter *cx24123_get_tuner_i2c_adapter(struct dvb_frontend *); @@ -56,6 +56,6 @@ static struct i2c_adapter * printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_CX24123 +#endif #endif /* CX24123_H */ diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 3eedfdf505b..21f2c5161af 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -41,6 +41,7 @@ struct dib0070_config { extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +extern u16 dib0070_wbd_offset(struct dvb_frontend *); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, @@ -49,9 +50,14 @@ static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } + +static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} #endif extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); -extern u16 dib0070_wbd_offset(struct dvb_frontend *); #endif diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c index 5f1375e30df..0109720353b 100644 --- a/drivers/media/dvb/frontends/dib7000m.c +++ b/drivers/media/dvb/frontends/dib7000m.c @@ -1284,7 +1284,10 @@ struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum di } EXPORT_SYMBOL(dib7000m_get_i2c_master); -int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[]) +#if 0 +/* used with some prototype boards */ +int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, + u8 default_addr, struct dib7000m_config cfg[]) { struct dib7000m_state st = { .i2c_adap = i2c }; int k = 0; @@ -1329,6 +1332,7 @@ int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 defau return 0; } EXPORT_SYMBOL(dib7000m_i2c_enumeration); +#endif static struct dvb_frontend_ops dib7000m_ops; struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg) diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 1a0142e0d74..8217e5b38f4 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1333,7 +1333,8 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, /* Ensure the output mode remains at the previous default if it's * not specifically set by the caller. */ - if (st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) + if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && + (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) st->cfg.output_mode = OUTMODE_MPEG2_FIFO; demod = &st->demod; diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index 07c4d12ed5b..3e812685712 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -41,6 +41,14 @@ struct dib7000p_config { extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +extern struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *, + enum dibx000_i2c_interface, + int); +extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, + int no_of_demods, u8 default_addr, + struct dib7000p_config cfg[]); +extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); +extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value); #else static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, @@ -49,13 +57,36 @@ static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif -extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); +static inline +struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *fe, + enum dibx000_i2c_interface i, int x) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, + int no_of_demods, u8 default_addr, + struct dib7000p_config cfg[]) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +extern int dib7000p_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +extern int dib7000p_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif -extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); extern int dib7000pc_detection(struct i2c_adapter *i2c_adap); -extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); -extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value); #endif diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index 3cbed874a6f..b9ca5c8d2dd 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -38,35 +38,32 @@ static const char mod_name[] = "drx397xD"; #define F_SET_0D0h 1 #define F_SET_0D4h 2 -typedef enum fw_ix { +enum fw_ix { #define _FW_ENTRY(a, b) b #include "drx397xD_fw.h" -} fw_ix_t; +}; /* chip specifics */ struct drx397xD_state { struct i2c_adapter *i2c; struct dvb_frontend frontend; struct drx397xD_config config; - fw_ix_t chip_rev; + enum fw_ix chip_rev; int flags; u32 bandwidth_parm; /* internal bandwidth conversions */ u32 f_osc; /* w90: actual osc frequency [Hz] */ }; -/******************************************************************************* - * Firmware - ******************************************************************************/ - +/* Firmware */ static const char *blob_name[] = { #define _BLOB_ENTRY(a, b) a #include "drx397xD_fw.h" }; -typedef enum blob_ix { +enum blob_ix { #define _BLOB_ENTRY(a, b) b #include "drx397xD_fw.h" -} blob_ix_t; +}; static struct { const char *name; @@ -85,7 +82,7 @@ static struct { }; /* use only with writer lock aquired */ -static void _drx_release_fw(struct drx397xD_state *s, fw_ix_t ix) +static void _drx_release_fw(struct drx397xD_state *s, enum fw_ix ix) { memset(&fw[ix].data[0], 0, sizeof(fw[0].data)); if (fw[ix].file) @@ -94,9 +91,9 @@ static void _drx_release_fw(struct drx397xD_state *s, fw_ix_t ix) static void drx_release_fw(struct drx397xD_state *s) { - fw_ix_t ix = s->chip_rev; + enum fw_ix ix = s->chip_rev; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); write_lock(&fw[ix].lock); if (fw[ix].refcnt) { @@ -107,13 +104,13 @@ static void drx_release_fw(struct drx397xD_state *s) write_unlock(&fw[ix].lock); } -static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix) +static int drx_load_fw(struct drx397xD_state *s, enum fw_ix ix) { const u8 *data; size_t size, len; int i = 0, j, rc = -EINVAL; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if (ix < 0 || ix >= ARRAY_SIZE(fw)) return -EINVAL; @@ -175,32 +172,34 @@ static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix) goto exit_corrupt; } } while (i < size); - exit_corrupt: + +exit_corrupt: printk(KERN_ERR "%s: Firmware is corrupt\n", mod_name); - exit_err: +exit_err: _drx_release_fw(s, ix); fw[ix].refcnt--; - exit_ok: +exit_ok: fw[ix].refcnt++; write_unlock(&fw[ix].lock); + return rc; } -/******************************************************************************* - * i2c bus IO - ******************************************************************************/ - -static int write_fw(struct drx397xD_state *s, blob_ix_t ix) +/* i2c bus IO */ +static int write_fw(struct drx397xD_state *s, enum blob_ix ix) { - struct i2c_msg msg = {.addr = s->config.demod_address,.flags = 0 }; const u8 *data; int len, rc = 0, i = 0; + struct i2c_msg msg = { + .addr = s->config.demod_address, + .flags = 0 + }; if (ix < 0 || ix >= ARRAY_SIZE(blob_name)) { - pr_debug("%s drx_fw_ix_t out of range\n", __FUNCTION__); + pr_debug("%s drx_fw_ix_t out of range\n", __func__); return -EINVAL; } - pr_debug("%s %s\n", __FUNCTION__, blob_name[ix]); + pr_debug("%s %s\n", __func__, blob_name[ix]); read_lock(&fw[s->chip_rev].lock); data = fw[s->chip_rev].data[ix]; @@ -229,33 +228,33 @@ static int write_fw(struct drx397xD_state *s, blob_ix_t ix) goto exit_rc; } } - exit_rc: +exit_rc: read_unlock(&fw[s->chip_rev].lock); + return 0; } /* Function is not endian safe, use the RD16 wrapper below */ -static int _read16(struct drx397xD_state *s, u32 i2c_adr) +static int _read16(struct drx397xD_state *s, __le32 i2c_adr) { int rc; u8 a[4]; - u16 v; + __le16 v; struct i2c_msg msg[2] = { { - .addr = s->config.demod_address, - .flags = 0, - .buf = a, - .len = sizeof(a) - } - , { - .addr = s->config.demod_address, - .flags = I2C_M_RD, - .buf = (u8 *) & v, - .len = sizeof(v) - } + .addr = s->config.demod_address, + .flags = 0, + .buf = a, + .len = sizeof(a) + }, { + .addr = s->config.demod_address, + .flags = I2C_M_RD, + .buf = (u8 *)&v, + .len = sizeof(v) + } }; - *(u32 *) a = i2c_adr; + *(__le32 *) a = i2c_adr; rc = i2c_transfer(s->i2c, msg, 2); if (rc != 2) @@ -265,7 +264,7 @@ static int _read16(struct drx397xD_state *s, u32 i2c_adr) } /* Function is not endian safe, use the WR16.. wrappers below */ -static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val) +static int _write16(struct drx397xD_state *s, __le32 i2c_adr, __le16 val) { u8 a[6]; int rc; @@ -276,28 +275,28 @@ static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val) .len = sizeof(a) }; - *(u32 *) a = i2c_adr; - *(u16 *) & a[4] = val; + *(__le32 *)a = i2c_adr; + *(__le16 *)&a[4] = val; rc = i2c_transfer(s->i2c, &msg, 1); if (rc != 1) return -EIO; + return 0; } -#define WR16(ss,adr, val) \ +#define WR16(ss, adr, val) \ _write16(ss, I2C_ADR_C0(adr), cpu_to_le16(val)) -#define WR16_E0(ss,adr, val) \ +#define WR16_E0(ss, adr, val) \ _write16(ss, I2C_ADR_E0(adr), cpu_to_le16(val)) -#define RD16(ss,adr) \ +#define RD16(ss, adr) \ _read16(ss, I2C_ADR_C0(adr)) -#define EXIT_RC( cmd ) if ( (rc = (cmd)) < 0) goto exit_rc - -/******************************************************************************* - * Tuner callback - ******************************************************************************/ +#define EXIT_RC(cmd) \ + if ((rc = (cmd)) < 0) \ + goto exit_rc +/* Tuner callback */ static int PLL_Set(struct drx397xD_state *s, struct dvb_frontend_parameters *fep, int *df_tuner) { @@ -305,7 +304,7 @@ static int PLL_Set(struct drx397xD_state *s, u32 f_tuner, f = fep->frequency; int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if ((f > s->frontend.ops.tuner_ops.info.frequency_max) || (f < s->frontend.ops.tuner_ops.info.frequency_min)) @@ -325,28 +324,26 @@ static int PLL_Set(struct drx397xD_state *s, return rc; *df_tuner = f_tuner - f; - pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __FUNCTION__, f, + pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __func__, f, f_tuner); return 0; } -/******************************************************************************* - * Demodulator helper functions - ******************************************************************************/ - +/* Demodulator helper functions */ static int SC_WaitForReady(struct drx397xD_state *s) { int cnt = 1000; int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); while (cnt--) { rc = RD16(s, 0x820043); if (rc == 0) return 0; } + return -1; } @@ -354,13 +351,14 @@ static int SC_SendCommand(struct drx397xD_state *s, int cmd) { int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); WR16(s, 0x820043, cmd); SC_WaitForReady(s); rc = RD16(s, 0x820042); if ((rc & 0xffff) == 0xffff) return -1; + return 0; } @@ -368,7 +366,7 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd) { int rc, cnt = 1000; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); rc = WR16(s, 0x420032, cmd); if (rc < 0) @@ -383,22 +381,24 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd) if (rc < 0) return rc; } while (--cnt); + return rc; } static int HI_CfgCommand(struct drx397xD_state *s) { - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); WR16(s, 0x420033, 0x3973); - WR16(s, 0x420034, s->config.w50); // code 4, log 4 - WR16(s, 0x420035, s->config.w52); // code 15, log 9 + WR16(s, 0x420034, s->config.w50); /* code 4, log 4 */ + WR16(s, 0x420035, s->config.w52); /* code 15, log 9 */ WR16(s, 0x420036, s->config.demod_address << 1); - WR16(s, 0x420037, s->config.w56); // code (set_i2c ?? initX 1 ), log 1 -// WR16(s, 0x420033, 0x3973); + WR16(s, 0x420037, s->config.w56); /* code (set_i2c ?? initX 1 ), log 1 */ + /* WR16(s, 0x420033, 0x3973); */ if ((s->config.w56 & 8) == 0) return HI_Command(s, 3); + return WR16(s, 0x420032, 0x3); } @@ -419,7 +419,7 @@ static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc) u16 w0C = agc->w0C; int quot, rem, i, rc = -EINVAL; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if (agc->w04 > 0x3ff) goto exit_rc; @@ -468,7 +468,7 @@ static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc) i = slowIncrDecLUT_15272[rem / 28]; EXIT_RC(WR16(s, 0x0c2002b, i)); rc = WR16(s, 0x0c2002c, i); - exit_rc: +exit_rc: return rc; } @@ -478,7 +478,7 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc) u16 w06 = agc->w06; int rc = -1; - pr_debug("%s %d 0x%x 0x%x\n", __FUNCTION__, agc->d00, w04, w06); + pr_debug("%s %d 0x%x 0x%x\n", __func__, agc->d00, w04, w06); if (w04 > 0x3ff) goto exit_rc; @@ -498,7 +498,7 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc) rc &= ~2; break; case 0: - // loc_8000659 + /* loc_8000659 */ s->config.w9C &= ~2; EXIT_RC(WR16(s, 0x0c20015, s->config.w9C)); EXIT_RC(RD16(s, 0x0c20010)); @@ -522,7 +522,8 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc) rc |= 2; } rc = WR16(s, 0x0c20013, rc); - exit_rc: + +exit_rc: return rc; } @@ -554,7 +555,7 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s) int lockstat; u32 clk, clk_limit; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if (s->config.d5C == 0) { EXIT_RC(WR16(s, 0x08200e8, 0x010)); @@ -598,11 +599,12 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s) if (clk - s->config.f_osc * 1000 + clk_limit <= 2 * clk_limit) { s->f_osc = clk; - pr_debug("%s: osc %d %d [Hz]\n", __FUNCTION__, + pr_debug("%s: osc %d %d [Hz]\n", __func__, s->config.f_osc * 1000, clk - s->config.f_osc * 1000); } rc = WR16(s, 0x08200e8, 0); - exit_rc: + +exit_rc: return rc; } @@ -610,7 +612,7 @@ static int ConfigureMPEGOutput(struct drx397xD_state *s, int type) { int rc, si, bp; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); si = s->config.wA0; if (s->config.w98 == 0) { @@ -620,17 +622,17 @@ static int ConfigureMPEGOutput(struct drx397xD_state *s, int type) si &= ~1; bp = 0x200; } - if (s->config.w9A == 0) { + if (s->config.w9A == 0) si |= 0x80; - } else { + else si &= ~0x80; - } EXIT_RC(WR16(s, 0x2150045, 0)); EXIT_RC(WR16(s, 0x2150010, si)); EXIT_RC(WR16(s, 0x2150011, bp)); rc = WR16(s, 0x2150012, (type == 0 ? 0xfff : 0)); - exit_rc: + +exit_rc: return rc; } @@ -646,7 +648,7 @@ static int drx_tune(struct drx397xD_state *s, int rc, df_tuner; int a, b, c, d; - pr_debug("%s %d\n", __FUNCTION__, s->config.d60); + pr_debug("%s %d\n", __func__, s->config.d60); if (s->config.d60 != 2) goto set_tuner; @@ -658,7 +660,7 @@ static int drx_tune(struct drx397xD_state *s, rc = ConfigureMPEGOutput(s, 0); if (rc < 0) goto set_tuner; - set_tuner: +set_tuner: rc = PLL_Set(s, fep, &df_tuner); if (rc < 0) { @@ -835,16 +837,16 @@ static int drx_tune(struct drx397xD_state *s, rc = WR16(s, 0x2010012, 0); if (rc < 0) goto exit_rc; - // QPSK QAM16 QAM64 - ebx = 0x19f; // 62 - ebp = 0x1fb; // 15 - v20 = 0x16a; // 62 - v1E = 0x195; // 62 - v16 = 0x1bb; // 15 - v14 = 0x1ef; // 15 - v12 = 5; // 16 - v10 = 5; // 16 - v0E = 5; // 16 + /* QPSK QAM16 QAM64 */ + ebx = 0x19f; /* 62 */ + ebp = 0x1fb; /* 15 */ + v20 = 0x16a; /* 62 */ + v1E = 0x195; /* 62 */ + v16 = 0x1bb; /* 15 */ + v14 = 0x1ef; /* 15 */ + v12 = 5; /* 16 */ + v10 = 5; /* 16 */ + v0E = 5; /* 16 */ } switch (fep->u.ofdm.constellation) { @@ -997,17 +999,17 @@ static int drx_tune(struct drx397xD_state *s, case BANDWIDTH_8_MHZ: /* 0 */ case BANDWIDTH_AUTO: rc = WR16(s, 0x0c2003f, 0x32); - s->bandwidth_parm = ebx = 0x8b8249; // 9142857 + s->bandwidth_parm = ebx = 0x8b8249; edx = 0; break; case BANDWIDTH_7_MHZ: rc = WR16(s, 0x0c2003f, 0x3b); - s->bandwidth_parm = ebx = 0x7a1200; // 8000000 + s->bandwidth_parm = ebx = 0x7a1200; edx = 0x4807; break; case BANDWIDTH_6_MHZ: rc = WR16(s, 0x0c2003f, 0x47); - s->bandwidth_parm = ebx = 0x68a1b6; // 6857142 + s->bandwidth_parm = ebx = 0x68a1b6; edx = 0x0f07; break; }; @@ -1060,8 +1062,6 @@ static int drx_tune(struct drx397xD_state *s, WR16(s, 0x0820040, 1); SC_SendCommand(s, 1); -// rc = WR16(s, 0x2150000, 1); -// if (rc < 0) goto exit_rc; rc = WR16(s, 0x2150000, 2); rc = WR16(s, 0x2150016, a); @@ -1069,7 +1069,8 @@ static int drx_tune(struct drx397xD_state *s, rc = WR16(s, 0x2150036, 0); rc = WR16(s, 0x2150000, 1); s->config.d60 = 2; - exit_rc: + +exit_rc: return rc; } @@ -1082,7 +1083,7 @@ static int drx397x_init(struct dvb_frontend *fe) struct drx397xD_state *s = fe->demodulator_priv; int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); s->config.rfagc.d00 = 2; /* 0x7c */ s->config.rfagc.w04 = 0; @@ -1102,18 +1103,18 @@ static int drx397x_init(struct dvb_frontend *fe) /* HI_CfgCommand */ s->config.w50 = 4; - s->config.w52 = 9; // 0xf; + s->config.w52 = 9; - s->config.f_if = 42800000; /* d14: intermediate frequency [Hz] */ - s->config.f_osc = 48000; /* s66 : oscillator frequency [kHz] */ - s->config.w92 = 12000; // 20000; + s->config.f_if = 42800000; /* d14: intermediate frequency [Hz] */ + s->config.f_osc = 48000; /* s66 : oscillator frequency [kHz] */ + s->config.w92 = 12000; s->config.w9C = 0x000e; s->config.w9E = 0x0000; /* ConfigureMPEGOutput params */ s->config.wA0 = 4; - s->config.w98 = 1; // 0; + s->config.w98 = 1; s->config.w9A = 1; /* get chip revision */ @@ -1248,7 +1249,7 @@ static int drx397x_init(struct dvb_frontend *fe) rc = WR16(s, 0x0c20012, 1); } - write_DRXD_InitFE_1: +write_DRXD_InitFE_1: rc = write_fw(s, DRXD_InitFE_1); if (rc < 0) @@ -1311,7 +1312,8 @@ static int drx397x_init(struct dvb_frontend *fe) s->config.d5C = 0; s->config.d60 = 1; s->config.d48 = 1; - error: + +error: return rc; } @@ -1326,7 +1328,8 @@ static int drx397x_set_frontend(struct dvb_frontend *fe, { struct drx397xD_state *s = fe->demodulator_priv; - s->config.s20d24 = 1; // 0; + s->config.s20d24 = 1; + return drx_tune(s, params); } @@ -1337,18 +1340,16 @@ static int drx397x_get_tune_settings(struct dvb_frontend *fe, fe_tune_settings->min_delay_ms = 10000; fe_tune_settings->step_size = 0; fe_tune_settings->max_drift = 0; + return 0; } -static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status) +static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct drx397xD_state *s = fe->demodulator_priv; int lockstat; GetLockStatus(s, &lockstat); - /* TODO */ -// if (lockstat & 1) -// CorrectSysClockDeviation(s); *status = 0; if (lockstat & 2) { @@ -1356,9 +1357,8 @@ static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status) ConfigureMPEGOutput(s, 1); *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; } - if (lockstat & 4) { + if (lockstat & 4) *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; - } return 0; } @@ -1366,16 +1366,18 @@ static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status) static int drx397x_read_ber(struct dvb_frontend *fe, unsigned int *ber) { *ber = 0; + return 0; } -static int drx397x_read_snr(struct dvb_frontend *fe, u16 * snr) +static int drx397x_read_snr(struct dvb_frontend *fe, u16 *snr) { *snr = 0; + return 0; } -static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct drx397xD_state *s = fe->demodulator_priv; int rc; @@ -1401,6 +1403,7 @@ static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 * strength) * The following does the same but with less rounding errors: */ *strength = ~(7720 + (rc * 30744 >> 10)); + return 0; } @@ -1408,6 +1411,7 @@ static int drx397x_read_ucblocks(struct dvb_frontend *fe, unsigned int *ucblocks) { *ucblocks = 0; + return 0; } @@ -1436,22 +1440,22 @@ static struct dvb_frontend_ops drx397x_ops = { .frequency_max = 855250000, .frequency_stepsize = 166667, .frequency_tolerance = 0, - .caps = /* 0x0C01B2EAE */ - FE_CAN_FEC_1_2 | // = 0x2, - FE_CAN_FEC_2_3 | // = 0x4, - FE_CAN_FEC_3_4 | // = 0x8, - FE_CAN_FEC_5_6 | // = 0x20, - FE_CAN_FEC_7_8 | // = 0x80, - FE_CAN_FEC_AUTO | // = 0x200, - FE_CAN_QPSK | // = 0x400, - FE_CAN_QAM_16 | // = 0x800, - FE_CAN_QAM_64 | // = 0x2000, - FE_CAN_QAM_AUTO | // = 0x10000, - FE_CAN_TRANSMISSION_MODE_AUTO | // = 0x20000, - FE_CAN_GUARD_INTERVAL_AUTO | // = 0x80000, - FE_CAN_HIERARCHY_AUTO | // = 0x100000, - FE_CAN_RECOVER | // = 0x40000000, - FE_CAN_MUTE_TS // = 0x80000000 + .caps = /* 0x0C01B2EAE */ + FE_CAN_FEC_1_2 | /* = 0x2, */ + FE_CAN_FEC_2_3 | /* = 0x4, */ + FE_CAN_FEC_3_4 | /* = 0x8, */ + FE_CAN_FEC_5_6 | /* = 0x20, */ + FE_CAN_FEC_7_8 | /* = 0x80, */ + FE_CAN_FEC_AUTO | /* = 0x200, */ + FE_CAN_QPSK | /* = 0x400, */ + FE_CAN_QAM_16 | /* = 0x800, */ + FE_CAN_QAM_64 | /* = 0x2000, */ + FE_CAN_QAM_AUTO | /* = 0x10000, */ + FE_CAN_TRANSMISSION_MODE_AUTO | /* = 0x20000, */ + FE_CAN_GUARD_INTERVAL_AUTO | /* = 0x80000, */ + FE_CAN_HIERARCHY_AUTO | /* = 0x100000, */ + FE_CAN_RECOVER | /* = 0x40000000, */ + FE_CAN_MUTE_TS /* = 0x80000000 */ }, .release = drx397x_release, @@ -1472,33 +1476,35 @@ static struct dvb_frontend_ops drx397x_ops = { struct dvb_frontend *drx397xD_attach(const struct drx397xD_config *config, struct i2c_adapter *i2c) { - struct drx397xD_state *s = NULL; + struct drx397xD_state *state; /* allocate memory for the internal state */ - s = kzalloc(sizeof(struct drx397xD_state), GFP_KERNEL); - if (s == NULL) + state = kzalloc(sizeof(struct drx397xD_state), GFP_KERNEL); + if (!state) goto error; /* setup the state */ - s->i2c = i2c; - memcpy(&s->config, config, sizeof(struct drx397xD_config)); + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct drx397xD_config)); /* check if the demod is there */ - if (RD16(s, 0x2410019) < 0) + if (RD16(state, 0x2410019) < 0) goto error; /* create dvb_frontend */ - memcpy(&s->frontend.ops, &drx397x_ops, sizeof(struct dvb_frontend_ops)); - s->frontend.demodulator_priv = s; + memcpy(&state->frontend.ops, &drx397x_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + kfree(state); - return &s->frontend; - error: - kfree(s); return NULL; } +EXPORT_SYMBOL(drx397xD_attach); MODULE_DESCRIPTION("Micronas DRX397xD DVB-T Frontend"); MODULE_AUTHOR("Henk Vergonet"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(drx397xD_attach); diff --git a/drivers/media/dvb/frontends/drx397xD.h b/drivers/media/dvb/frontends/drx397xD.h index ddc7a07971b..ba05d17290c 100644 --- a/drivers/media/dvb/frontends/drx397xD.h +++ b/drivers/media/dvb/frontends/drx397xD.h @@ -28,7 +28,7 @@ #define DRX_F_OFFSET 36000000 #define I2C_ADR_C0(x) \ -( (u32)cpu_to_le32( \ +( cpu_to_le32( \ (u32)( \ (((u32)(x) & (u32)0x000000ffUL) ) | \ (((u32)(x) & (u32)0x0000ff00UL) << 16) | \ @@ -38,7 +38,7 @@ ) #define I2C_ADR_E0(x) \ -( (u32)cpu_to_le32( \ +( cpu_to_le32( \ (u32)( \ (((u32)(x) & (u32)0x000000ffUL) ) | \ (((u32)(x) & (u32)0x0000ff00UL) << 16) | \ @@ -122,7 +122,7 @@ extern struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config static inline struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif /* CONFIG_DVB_DRX397XD */ diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c index fed09dfb2b7..db8a937cc63 100644 --- a/drivers/media/dvb/frontends/dvb_dummy_fe.c +++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c @@ -75,9 +75,10 @@ static int dvb_dummy_fe_get_frontend(struct dvb_frontend* fe, struct dvb_fronten static int dvb_dummy_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - if (fe->ops->tuner_ops->set_params) { - fe->ops->tuner_ops->set_params(fe, p); - if (fe->ops->i2c_gate_ctrl) fe->ops->i2c_gate_ctrl(fe, 0); + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } return 0; @@ -131,7 +132,7 @@ error: static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops; -struct dvb_frontend* dvb_dummy_fe_qpsk_attach() +struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void) { struct dvb_dummy_fe_state* state = NULL; @@ -151,7 +152,7 @@ error: static struct dvb_frontend_ops dvb_dummy_fe_qam_ops; -struct dvb_frontend* dvb_dummy_fe_qam_attach() +struct dvb_frontend *dvb_dummy_fe_qam_attach(void) { struct dvb_dummy_fe_state* state = NULL; diff --git a/drivers/media/dvb/frontends/eds1547.h b/drivers/media/dvb/frontends/eds1547.h new file mode 100644 index 00000000000..fa79b7c83dd --- /dev/null +++ b/drivers/media/dvb/frontends/eds1547.h @@ -0,0 +1,133 @@ +/* eds1547.h Earda EDS-1547 tuner support +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#ifndef EDS1547 +#define EDS1547 + +static u8 stv0288_earda_inittab[] = { + 0x01, 0x57, + 0x02, 0x20, + 0x03, 0x8e, + 0x04, 0x8e, + 0x05, 0x12, + 0x06, 0x00, + 0x07, 0x00, + 0x09, 0x00, + 0x0a, 0x04, + 0x0b, 0x00, + 0x0c, 0x00, + 0x0d, 0x00, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x44, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x00, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x00, + 0x23, 0x00, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x00, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbd, + 0x3a, 0x00, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x60, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x00, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x00, + 0x5f, 0xff, + 0x70, 0x00, + 0x71, 0x00, + 0x72, 0x00, + 0x74, 0x00, + 0x75, 0x00, + 0x76, 0x00, + 0x81, 0x00, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x00, + 0x85, 0x00, + 0x88, 0x00, + 0x89, 0x00, + 0x8a, 0x00, + 0x8b, 0x00, + 0x8c, 0x00, + 0x90, 0x00, + 0x91, 0x00, + 0x92, 0x00, + 0x93, 0x00, + 0x94, 0x1c, + 0x97, 0x00, + 0xa0, 0x48, + 0xa1, 0x00, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x00, + 0xf0, 0x00, + 0xf1, 0x00, + 0xf2, 0xc0, + 0xff,0xff, +}; + +static struct stv0288_config earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .inittab = stv0288_earda_inittab, +}; + +#endif diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c new file mode 100644 index 00000000000..855852fddf2 --- /dev/null +++ b/drivers/media/dvb/frontends/lgs8gl5.c @@ -0,0 +1,454 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee <timothy.lee@siriushk.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include "dvb_frontend.h" +#include "lgs8gl5.h" + + +#define REG_RESET 0x02 +#define REG_RESET_OFF 0x01 +#define REG_03 0x03 +#define REG_04 0x04 +#define REG_07 0x07 +#define REG_09 0x09 +#define REG_0A 0x0a +#define REG_0B 0x0b +#define REG_0C 0x0c +#define REG_37 0x37 +#define REG_STRENGTH 0x4b +#define REG_STRENGTH_MASK 0x7f +#define REG_STRENGTH_CARRIER 0x80 +#define REG_INVERSION 0x7c +#define REG_INVERSION_ON 0x80 +#define REG_7D 0x7d +#define REG_7E 0x7e +#define REG_A2 0xa2 +#define REG_STATUS 0xa4 +#define REG_STATUS_SYNC 0x04 +#define REG_STATUS_LOCK 0x01 + + +struct lgs8gl5_state { + struct i2c_adapter *i2c; + const struct lgs8gl5_config *config; + struct dvb_frontend frontend; +}; + + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "lgs8gl5: " args); \ + } while (0) + + +/* Writes into demod's register */ +static int +lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = {reg, data}; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: error (reg=0x%02x, val=0x%02x, ret=%i)\n", + __func__, reg, data, ret); + return (ret != 1) ? -1 : 0; +} + + +/* Reads from demod's register */ +static int +lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg) +{ + int ret; + u8 b0[] = {reg}; + u8 b1[] = {0}; + struct i2c_msg msg[2] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) + return -EIO; + + return b1[0]; +} + + +static int +lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + lgs8gl5_read_reg(state, reg); + lgs8gl5_write_reg(state, reg, data); + return 0; +} + + +/* Writes into alternate device's register */ +/* TODO: Find out what that device is for! */ +static int +lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret; + u8 b0[] = {reg}; + u8 b1[] = {0}; + u8 b2[] = {reg, data}; + struct i2c_msg msg[3] = { + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b2, + .len = 2 + }, + }; + + ret = i2c_transfer(state->i2c, msg, 3); + return (ret != 3) ? -1 : 0; +} + + +static void +lgs8gl5_soft_reset(struct lgs8gl5_state *state) +{ + u8 val; + + dprintk("%s\n", __func__); + + val = lgs8gl5_read_reg(state, REG_RESET); + lgs8gl5_write_reg(state, REG_RESET, val & ~REG_RESET_OFF); + lgs8gl5_write_reg(state, REG_RESET, val | REG_RESET_OFF); + msleep(5); +} + + +/* Starts demodulation */ +static void +lgs8gl5_start_demod(struct lgs8gl5_state *state) +{ + u8 val; + int n; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + lgs8gl5_update_reg(state, REG_03, 0x00); + lgs8gl5_update_reg(state, REG_7E, 0x01); + lgs8gl5_update_alt_reg(state, 0xc5, 0x00); + lgs8gl5_update_reg(state, REG_04, 0x02); + lgs8gl5_update_reg(state, REG_37, 0x01); + lgs8gl5_soft_reset(state); + + /* Wait for carrier */ + for (n = 0; n < 10; n++) { + val = lgs8gl5_read_reg(state, REG_STRENGTH); + dprintk("Wait for carrier[%d] 0x%02X\n", n, val); + if (val & REG_STRENGTH_CARRIER) + break; + msleep(4); + } + if (!(val & REG_STRENGTH_CARRIER)) + return; + + /* Wait for lock */ + for (n = 0; n < 20; n++) { + val = lgs8gl5_read_reg(state, REG_STATUS); + dprintk("Wait for lock[%d] 0x%02X\n", n, val); + if (val & REG_STATUS_LOCK) + break; + msleep(12); + } + if (!(val & REG_STATUS_LOCK)) + return; + + lgs8gl5_write_reg(state, REG_7D, lgs8gl5_read_reg(state, REG_A2)); + lgs8gl5_soft_reset(state); +} + + +static int +lgs8gl5_init(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + return 0; +} + + +static int +lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + u8 flags = lgs8gl5_read_reg(state, REG_STATUS); + + *status = 0; + + if ((level & REG_STRENGTH_MASK) > 0) + *status |= FE_HAS_SIGNAL; + if (level & REG_STRENGTH_CARRIER) + *status |= FE_HAS_CARRIER; + if (flags & REG_STATUS_SYNC) + *status |= FE_HAS_SYNC; + if (flags & REG_STATUS_LOCK) + *status |= FE_HAS_LOCK; + + return 0; +} + + +static int +lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + + return 0; +} + + +static int +lgs8gl5_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *signal_strength = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *snr = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + + return 0; +} + + +static int +lgs8gl5_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ) + return -EINVAL; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* lgs8gl5_set_inversion(state, p->inversion); */ + + lgs8gl5_start_demod(state); + + return 0; +} + + +static int +lgs8gl5_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 inv = lgs8gl5_read_reg(state, REG_INVERSION); + struct dvb_ofdm_parameters *o = &p->u.ofdm; + + p->inversion = (inv & REG_INVERSION_ON) ? INVERSION_ON : INVERSION_OFF; + + o->code_rate_HP = FEC_1_2; + o->code_rate_LP = FEC_7_8; + o->guard_interval = GUARD_INTERVAL_1_32; + o->transmission_mode = TRANSMISSION_MODE_2K; + o->constellation = QAM_64; + o->hierarchy_information = HIERARCHY_NONE; + o->bandwidth = BANDWIDTH_8_MHZ; + + return 0; +} + + +static int +lgs8gl5_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 240; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + + +static void +lgs8gl5_release(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops lgs8gl5_ops; + + +struct dvb_frontend* +lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c) +{ + struct lgs8gl5_state *state = NULL; + + dprintk("%s\n", __func__); + + /* Allocate memory for the internal state */ + state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + + /* Check if the demod is there */ + if (lgs8gl5_read_reg(state, REG_RESET) < 0) + goto error; + + /* Create dvb_frontend */ + memcpy(&state->frontend.ops, &lgs8gl5_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(lgs8gl5_attach); + + +static struct dvb_frontend_ops lgs8gl5_ops = { + .info = { + .name = "Legend Silicon LGS-8GL5 DMB-TH", + .type = FE_OFDM, + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_32 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_BANDWIDTH_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER + }, + + .release = lgs8gl5_release, + + .init = lgs8gl5_init, + + .set_frontend = lgs8gl5_set_frontend, + .get_frontend = lgs8gl5_get_frontend, + .get_tune_settings = lgs8gl5_get_tune_settings, + + .read_status = lgs8gl5_read_status, + .read_ber = lgs8gl5_read_ber, + .read_signal_strength = lgs8gl5_read_signal_strength, + .read_snr = lgs8gl5_read_snr, + .read_ucblocks = lgs8gl5_read_ucblocks, +}; + + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Legend Silicon LGS-8GL5 DMB-TH Demodulator driver"); +MODULE_AUTHOR("Timothy Lee"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/lgs8gl5.h b/drivers/media/dvb/frontends/lgs8gl5.h new file mode 100644 index 00000000000..d14176787a7 --- /dev/null +++ b/drivers/media/dvb/frontends/lgs8gl5.h @@ -0,0 +1,45 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee <timothy.lee@siriushk.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef LGS8GL5_H +#define LGS8GL5_H + +#include <linux/dvb/frontend.h> + +struct lgs8gl5_config { + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if defined(CONFIG_DVB_LGS8GL5) || \ + (defined(CONFIG_DVB_LGS8GL5_MODULE) && defined(MODULE)) +extern struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c) { + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LGS8GL5 */ + +#endif /* LGS8GL5_H */ diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c index af298358e82..a8429ebfa8a 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -80,7 +80,7 @@ static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len return 0; } -static u8 i2c_readbytes (struct nxt200x_state* state, u8 addr, u8* buf, u8 len) +static int i2c_readbytes(struct nxt200x_state *state, u8 addr, u8 *buf, u8 len) { int err; struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; @@ -111,7 +111,7 @@ static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, return 0; } -static u8 nxt200x_readbytes (struct nxt200x_state* state, u8 reg, u8* buf, u8 len) +static int nxt200x_readbytes(struct nxt200x_state *state, u8 reg, u8 *buf, u8 len) { u8 reg2 [] = { reg }; diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index 6afe12aaca4..16cf2fdd5d7 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -88,7 +88,7 @@ static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, return 0; } -static u8 i2c_readbytes (struct or51211_state* state, u8 reg, u8* buf, int len) +static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) { int err; struct i2c_msg msg; diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 7500a1c53e6..cf4d8936bb8 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -30,10 +30,10 @@ struct s5h1409_state { - struct i2c_adapter* i2c; + struct i2c_adapter *i2c; /* configuration settings */ - const struct s5h1409_config* config; + const struct s5h1409_config *config; struct dvb_frontend frontend; @@ -48,6 +48,9 @@ struct s5h1409_state { }; static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + #define dprintk if (debug) printk /* Register values to initialise the demod, this will set VSB by default */ @@ -299,10 +302,10 @@ static struct qam256_snr_tab { }; /* 8 bit registers, 16 bit values */ -static int s5h1409_writereg(struct s5h1409_state* state, u8 reg, u16 data) +static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data) { int ret; - u8 buf [] = { reg, data >> 8, data & 0xff }; + u8 buf[] = { reg, data >> 8, data & 0xff }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 }; @@ -310,19 +313,19 @@ static int s5h1409_writereg(struct s5h1409_state* state, u8 reg, u16 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " + printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, " "ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } -static u16 s5h1409_readreg(struct s5h1409_state* state, u8 reg) +static u16 s5h1409_readreg(struct s5h1409_state *state, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0, 0 }; + u8 b0[] = { reg }; + u8 b1[] = { 0, 0 }; - struct i2c_msg msg [] = { + struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, { .addr = state->config->demod_address, .flags = I2C_M_RD, @@ -335,9 +338,9 @@ static u16 s5h1409_readreg(struct s5h1409_state* state, u8 reg) return (b1[0] << 8) | b1[1]; } -static int s5h1409_softreset(struct dvb_frontend* fe) +static int s5h1409_softreset(struct dvb_frontend *fe) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); @@ -349,11 +352,11 @@ static int s5h1409_softreset(struct dvb_frontend* fe) } #define S5H1409_VSB_IF_FREQ 5380 -#define S5H1409_QAM_IF_FREQ state->config->qam_if +#define S5H1409_QAM_IF_FREQ (state->config->qam_if) -static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) +static int s5h1409_set_if_freq(struct dvb_frontend *fe, int KHz) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d KHz)\n", __func__, KHz); @@ -376,26 +379,26 @@ static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) return 0; } -static int s5h1409_set_spectralinversion(struct dvb_frontend* fe, int inverted) +static int s5h1409_set_spectralinversion(struct dvb_frontend *fe, int inverted) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, inverted); - if(inverted == 1) + if (inverted == 1) return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */ else return s5h1409_writereg(state, 0x1b, 0x0110); /* Normal */ } -static int s5h1409_enable_modulation(struct dvb_frontend* fe, +static int s5h1409_enable_modulation(struct dvb_frontend *fe, fe_modulation_t m) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(0x%08x)\n", __func__, m); - switch(m) { + switch (m) { case VSB_8: dprintk("%s() VSB_8\n", __func__); if (state->if_freq != S5H1409_VSB_IF_FREQ) @@ -422,9 +425,9 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe, return 0; } -static int s5h1409_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +static int s5h1409_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, enable); @@ -434,9 +437,9 @@ static int s5h1409_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) return s5h1409_writereg(state, 0xf3, 0); } -static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) +static int s5h1409_set_gpio(struct dvb_frontend *fe, int enable) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, enable); @@ -448,18 +451,18 @@ static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) s5h1409_readreg(state, 0xe3) & 0xfeff); } -static int s5h1409_sleep(struct dvb_frontend* fe, int enable) +static int s5h1409_sleep(struct dvb_frontend *fe, int enable) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, enable); return s5h1409_writereg(state, 0xf2, enable); } -static int s5h1409_register_reset(struct dvb_frontend* fe) +static int s5h1409_register_reset(struct dvb_frontend *fe) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); @@ -483,7 +486,7 @@ static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe) reg &= 0xff; s5h1409_writereg(state, 0x96, 0x00c); - if ((reg < 0x38) || (reg > 0x68) ) { + if ((reg < 0x38) || (reg > 0x68)) { s5h1409_writereg(state, 0x93, 0x3332); s5h1409_writereg(state, 0x9e, 0x2c37); } else { @@ -514,7 +517,7 @@ static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) s5h1409_writereg(state, 0x96, 0x20); s5h1409_writereg(state, 0xad, - ( ((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)) ); + (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff))); s5h1409_writereg(state, 0xab, s5h1409_readreg(state, 0xab) & 0xeffe); } @@ -529,10 +532,10 @@ static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) } /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ -static int s5h1409_set_frontend (struct dvb_frontend* fe, +static int s5h1409_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(frequency=%d)\n", __func__, p->frequency); @@ -546,9 +549,11 @@ static int s5h1409_set_frontend (struct dvb_frontend* fe, msleep(100); if (fe->ops.tuner_ops.set_params) { - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } /* Optimize the demod for QAM */ @@ -592,17 +597,17 @@ static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) /* Reset the demod hardware and reset all of the configuration registers to a default state. */ -static int s5h1409_init (struct dvb_frontend* fe) +static int s5h1409_init(struct dvb_frontend *fe) { int i; - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); s5h1409_sleep(fe, 0); s5h1409_register_reset(fe); - for (i=0; i < ARRAY_SIZE(init_tab); i++) + for (i = 0; i < ARRAY_SIZE(init_tab); i++) s5h1409_writereg(state, init_tab[i].reg, init_tab[i].data); /* The datasheet says that after initialisation, VSB is default */ @@ -627,9 +632,9 @@ static int s5h1409_init (struct dvb_frontend* fe) return 0; } -static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int s5h1409_read_status(struct dvb_frontend *fe, fe_status_t *status) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; u16 reg; u32 tuner_status = 0; @@ -637,12 +642,12 @@ static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Get the demodulator status */ reg = s5h1409_readreg(state, 0xf1); - if(reg & 0x1000) + if (reg & 0x1000) *status |= FE_HAS_VITERBI; - if(reg & 0x8000) + if (reg & 0x8000) *status |= FE_HAS_LOCK | FE_HAS_SYNC; - switch(state->config->status_mode) { + switch (state->config->status_mode) { case S5H1409_DEMODLOCKING: if (*status & FE_HAS_VITERBI) *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; @@ -668,12 +673,12 @@ static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } -static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) +static int s5h1409_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) { int i, ret = -EINVAL; dprintk("%s()\n", __func__); - for (i=0; i < ARRAY_SIZE(qam256_snr_tab); i++) { + for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) { if (v < qam256_snr_tab[i].val) { *snr = qam256_snr_tab[i].data; ret = 0; @@ -683,12 +688,12 @@ static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) return ret; } -static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) +static int s5h1409_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) { int i, ret = -EINVAL; dprintk("%s()\n", __func__); - for (i=0; i < ARRAY_SIZE(qam64_snr_tab); i++) { + for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) { if (v < qam64_snr_tab[i].val) { *snr = qam64_snr_tab[i].data; ret = 0; @@ -698,12 +703,12 @@ static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) return ret; } -static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) +static int s5h1409_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) { int i, ret = -EINVAL; dprintk("%s()\n", __func__); - for (i=0; i < ARRAY_SIZE(vsb_snr_tab); i++) { + for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) { if (v > vsb_snr_tab[i].val) { *snr = vsb_snr_tab[i].data; ret = 0; @@ -714,13 +719,13 @@ static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) return ret; } -static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) +static int s5h1409_read_snr(struct dvb_frontend *fe, u16 *snr) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; u16 reg; dprintk("%s()\n", __func__); - switch(state->current_modulation) { + switch (state->current_modulation) { case QAM_64: reg = s5h1409_readreg(state, 0xf0) & 0xff; return s5h1409_qam64_lookup_snr(fe, snr, reg); @@ -737,30 +742,30 @@ static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) return -EINVAL; } -static int s5h1409_read_signal_strength(struct dvb_frontend* fe, - u16* signal_strength) +static int s5h1409_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { return s5h1409_read_snr(fe, signal_strength); } -static int s5h1409_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +static int s5h1409_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; *ucblocks = s5h1409_readreg(state, 0xb5); return 0; } -static int s5h1409_read_ber(struct dvb_frontend* fe, u32* ber) +static int s5h1409_read_ber(struct dvb_frontend *fe, u32 *ber) { return s5h1409_read_ucblocks(fe, ber); } -static int s5h1409_get_frontend(struct dvb_frontend* fe, +static int s5h1409_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; p->frequency = state->current_frequency; p->u.vsb.modulation = state->current_modulation; @@ -768,25 +773,25 @@ static int s5h1409_get_frontend(struct dvb_frontend* fe, return 0; } -static int s5h1409_get_tune_settings(struct dvb_frontend* fe, +static int s5h1409_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 1000; return 0; } -static void s5h1409_release(struct dvb_frontend* fe) +static void s5h1409_release(struct dvb_frontend *fe) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; kfree(state); } static struct dvb_frontend_ops s5h1409_ops; -struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, + struct i2c_adapter *i2c) { - struct s5h1409_state* state = NULL; + struct s5h1409_state *state = NULL; u16 reg; /* allocate memory for the internal state */ @@ -825,6 +830,7 @@ error: kfree(state); return NULL; } +EXPORT_SYMBOL(s5h1409_attach); static struct dvb_frontend_ops s5h1409_ops = { @@ -850,14 +856,10 @@ static struct dvb_frontend_ops s5h1409_ops = { .release = s5h1409_release, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable verbose debug messages"); - MODULE_DESCRIPTION("Samsung S5H1409 QAM-B/ATSC Demodulator driver"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(s5h1409_attach); /* * Local variables: diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h index d1a1d2eb8e1..070d9743e33 100644 --- a/drivers/media/dvb/frontends/s5h1409.h +++ b/drivers/media/dvb/frontends/s5h1409.h @@ -24,8 +24,7 @@ #include <linux/dvb/frontend.h> -struct s5h1409_config -{ +struct s5h1409_config { /* the demodulator's i2c address */ u8 demod_address; @@ -60,12 +59,14 @@ struct s5h1409_config u16 mpeg_timing; }; -#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) && defined(MODULE)) -extern struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, - struct i2c_adapter* i2c); +#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *s5h1409_attach( + const struct s5h1409_config *config, + struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index 2da1a3763de..2febfb5a846 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -343,7 +343,7 @@ static int s5h1411_writereg(struct s5h1411_state *state, u8 addr, u8 reg, u16 data) { int ret; - u8 buf [] = { reg, data >> 8, data & 0xff }; + u8 buf[] = { reg, data >> 8, data & 0xff }; struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 }; @@ -359,10 +359,10 @@ static int s5h1411_writereg(struct s5h1411_state *state, static u16 s5h1411_readreg(struct s5h1411_state *state, u8 addr, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0, 0 }; + u8 b0[] = { reg }; + u8 b1[] = { 0, 0 }; - struct i2c_msg msg [] = { + struct i2c_msg msg[] = { { .addr = addr, .flags = 0, .buf = b0, .len = 1 }, { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c new file mode 100644 index 00000000000..3ddbe69c45c --- /dev/null +++ b/drivers/media/dvb/frontends/si21xx.c @@ -0,0 +1,974 @@ +/* DVB compliant Linux driver for the DVB-S si2109/2110 demodulator +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <asm/div64.h> + +#include "dvb_frontend.h" +#include "si21xx.h" + +#define REVISION_REG 0x00 +#define SYSTEM_MODE_REG 0x01 +#define TS_CTRL_REG_1 0x02 +#define TS_CTRL_REG_2 0x03 +#define PIN_CTRL_REG_1 0x04 +#define PIN_CTRL_REG_2 0x05 +#define LOCK_STATUS_REG_1 0x0f +#define LOCK_STATUS_REG_2 0x10 +#define ACQ_STATUS_REG 0x11 +#define ACQ_CTRL_REG_1 0x13 +#define ACQ_CTRL_REG_2 0x14 +#define PLL_DIVISOR_REG 0x15 +#define COARSE_TUNE_REG 0x16 +#define FINE_TUNE_REG_L 0x17 +#define FINE_TUNE_REG_H 0x18 + +#define ANALOG_AGC_POWER_LEVEL_REG 0x28 +#define CFO_ESTIMATOR_CTRL_REG_1 0x29 +#define CFO_ESTIMATOR_CTRL_REG_2 0x2a +#define CFO_ESTIMATOR_CTRL_REG_3 0x2b + +#define SYM_RATE_ESTIMATE_REG_L 0x31 +#define SYM_RATE_ESTIMATE_REG_M 0x32 +#define SYM_RATE_ESTIMATE_REG_H 0x33 + +#define CFO_ESTIMATOR_OFFSET_REG_L 0x36 +#define CFO_ESTIMATOR_OFFSET_REG_H 0x37 +#define CFO_ERROR_REG_L 0x38 +#define CFO_ERROR_REG_H 0x39 +#define SYM_RATE_ESTIMATOR_CTRL_REG 0x3a + +#define SYM_RATE_REG_L 0x3f +#define SYM_RATE_REG_M 0x40 +#define SYM_RATE_REG_H 0x41 +#define SYM_RATE_ESTIMATOR_MAXIMUM_REG 0x42 +#define SYM_RATE_ESTIMATOR_MINIMUM_REG 0x43 + +#define C_N_ESTIMATOR_CTRL_REG 0x7c +#define C_N_ESTIMATOR_THRSHLD_REG 0x7d +#define C_N_ESTIMATOR_LEVEL_REG_L 0x7e +#define C_N_ESTIMATOR_LEVEL_REG_H 0x7f + +#define BLIND_SCAN_CTRL_REG 0x80 + +#define LSA_CTRL_REG_1 0x8D +#define SPCTRM_TILT_CORR_THRSHLD_REG 0x8f +#define ONE_DB_BNDWDTH_THRSHLD_REG 0x90 +#define TWO_DB_BNDWDTH_THRSHLD_REG 0x91 +#define THREE_DB_BNDWDTH_THRSHLD_REG 0x92 +#define INBAND_POWER_THRSHLD_REG 0x93 +#define REF_NOISE_LVL_MRGN_THRSHLD_REG 0x94 + +#define VIT_SRCH_CTRL_REG_1 0xa0 +#define VIT_SRCH_CTRL_REG_2 0xa1 +#define VIT_SRCH_CTRL_REG_3 0xa2 +#define VIT_SRCH_STATUS_REG 0xa3 +#define VITERBI_BER_COUNT_REG_L 0xab +#define REED_SOLOMON_CTRL_REG 0xb0 +#define REED_SOLOMON_ERROR_COUNT_REG_L 0xb1 +#define PRBS_CTRL_REG 0xb5 + +#define LNB_CTRL_REG_1 0xc0 +#define LNB_CTRL_REG_2 0xc1 +#define LNB_CTRL_REG_3 0xc2 +#define LNB_CTRL_REG_4 0xc3 +#define LNB_CTRL_STATUS_REG 0xc4 +#define LNB_FIFO_REGS_0 0xc5 +#define LNB_FIFO_REGS_1 0xc6 +#define LNB_FIFO_REGS_2 0xc7 +#define LNB_FIFO_REGS_3 0xc8 +#define LNB_FIFO_REGS_4 0xc9 +#define LNB_FIFO_REGS_5 0xca +#define LNB_SUPPLY_CTRL_REG_1 0xcb +#define LNB_SUPPLY_CTRL_REG_2 0xcc +#define LNB_SUPPLY_CTRL_REG_3 0xcd +#define LNB_SUPPLY_CTRL_REG_4 0xce +#define LNB_SUPPLY_STATUS_REG 0xcf + +#define FALSE 0 +#define TRUE 1 +#define FAIL -1 +#define PASS 0 + +#define ALLOWABLE_FS_COUNT 10 +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "si21xx: " args); \ + } while (0) + +enum { + ACTIVE_HIGH, + ACTIVE_LOW +}; +enum { + BYTE_WIDE, + BIT_WIDE +}; +enum { + CLK_GAPPED_MODE, + CLK_CONTINUOUS_MODE +}; +enum { + RISING_EDGE, + FALLING_EDGE +}; +enum { + MSB_FIRST, + LSB_FIRST +}; +enum { + SERIAL, + PARALLEL +}; + +struct si21xx_state { + struct i2c_adapter *i2c; + const struct si21xx_config *config; + struct dvb_frontend frontend; + u8 initialised:1; + int errmode; + int fs; /*Sampling rate of the ADC in MHz*/ +}; + +/* register default initialization */ +static u8 serit_sp1511lhb_inittab[] = { + 0x01, 0x28, /* set i2c_inc_disable */ + 0x20, 0x03, + 0x27, 0x20, + 0xe0, 0x45, + 0xe1, 0x08, + 0xfe, 0x01, + 0x01, 0x28, + 0x89, 0x09, + 0x04, 0x80, + 0x05, 0x01, + 0x06, 0x00, + 0x20, 0x03, + 0x24, 0x88, + 0x29, 0x09, + 0x2a, 0x0f, + 0x2c, 0x10, + 0x2d, 0x19, + 0x2e, 0x08, + 0x2f, 0x10, + 0x30, 0x19, + 0x34, 0x20, + 0x35, 0x03, + 0x45, 0x02, + 0x46, 0x45, + 0x47, 0xd0, + 0x48, 0x00, + 0x49, 0x40, + 0x4a, 0x03, + 0x4c, 0xfd, + 0x4f, 0x2e, + 0x50, 0x2e, + 0x51, 0x10, + 0x52, 0x10, + 0x56, 0x92, + 0x59, 0x00, + 0x5a, 0x2d, + 0x5b, 0x33, + 0x5c, 0x1f, + 0x5f, 0x76, + 0x62, 0xc0, + 0x63, 0xc0, + 0x64, 0xf3, + 0x65, 0xf3, + 0x79, 0x40, + 0x6a, 0x40, + 0x6b, 0x0a, + 0x6c, 0x80, + 0x6d, 0x27, + 0x71, 0x06, + 0x75, 0x60, + 0x78, 0x00, + 0x79, 0xb5, + 0x7c, 0x05, + 0x7d, 0x1a, + 0x87, 0x55, + 0x88, 0x72, + 0x8f, 0x08, + 0x90, 0xe0, + 0x94, 0x40, + 0xa0, 0x3f, + 0xa1, 0xc0, + 0xa4, 0xcc, + 0xa5, 0x66, + 0xa6, 0x66, + 0xa7, 0x7b, + 0xa8, 0x7b, + 0xa9, 0x7b, + 0xaa, 0x9a, + 0xed, 0x04, + 0xad, 0x00, + 0xae, 0x03, + 0xcc, 0xab, + 0x01, 0x08, + 0xff, 0xff +}; + +/* low level read/writes */ +static int si21_writeregs(struct si21xx_state *state, u8 reg1, + u8 *data, int len) +{ + int ret; + u8 buf[60];/* = { reg1, data };*/ + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = len + 1 + }; + + msg.buf[0] = reg1; + memcpy(msg.buf + 1, data, len); + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, " + "ret == %i)\n", __func__, reg1, data[0], ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int si21_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct si21xx_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return si21_writereg(state, buf[0], buf[1]); +} + +static u8 si21_readreg(struct si21xx_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int si21_readregs(struct si21xx_state *state, u8 reg1, u8 *b, u8 len) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = ®1, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b, + .len = len + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); + + return ret == 2 ? 0 : -1; +} + +static int si21xx_wait_diseqc_idle(struct si21xx_state *state, int timeout) +{ + unsigned long start = jiffies; + + dprintk("%s\n", __func__); + + while ((si21_readreg(state, LNB_CTRL_REG_1) & 0x8) == 8) { + if (jiffies - start > timeout) { + dprintk("%s: timeout!!\n", __func__); + return -ETIMEDOUT; + } + msleep(10); + }; + + return 0; +} + +static int si21xx_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct si21xx_state *state = fe->demodulator_priv; + u32 sym_rate, data_rate; + int i; + u8 sym_rate_bytes[3]; + + dprintk("%s : srate = %i\n", __func__ , srate); + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + data_rate = srate; + sym_rate = 0; + + for (i = 0; i < 4; ++i) { + sym_rate /= 100; + sym_rate = sym_rate + ((data_rate % 100) * 0x800000) / + state->fs; + data_rate /= 100; + } + for (i = 0; i < 3; ++i) + sym_rate_bytes[i] = (u8)((sym_rate >> (i * 8)) & 0xff); + + si21_writeregs(state, SYM_RATE_REG_L, sym_rate_bytes, 0x03); + + return 0; +} + +static int si21xx_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 lnb_status; + u8 LNB_CTRL_1; + int status; + + dprintk("%s\n", __func__); + + status = PASS; + LNB_CTRL_1 = 0; + + status |= si21_readregs(state, LNB_CTRL_STATUS_REG, &lnb_status, 0x01); + status |= si21_readregs(state, LNB_CTRL_REG_1, &lnb_status, 0x01); + + /*fill the FIFO*/ + status |= si21_writeregs(state, LNB_FIFO_REGS_0, m->msg, m->msg_len); + + LNB_CTRL_1 = (lnb_status & 0x70); + LNB_CTRL_1 |= m->msg_len; + + LNB_CTRL_1 |= 0x80; /* begin LNB signaling */ + + status |= si21_writeregs(state, LNB_CTRL_REG_1, &LNB_CTRL_1, 0x01); + + return status; +} + +static int si21xx_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s\n", __func__); + + if (si21xx_wait_diseqc_idle(state, 100) < 0) + return -ETIMEDOUT; + + val = (0x80 | si21_readreg(state, 0xc1)); + if (si21_writereg(state, LNB_CTRL_REG_1, + burst == SEC_MINI_A ? (val & ~0x10) : (val | 0x10))) + return -EREMOTEIO; + + if (si21xx_wait_diseqc_idle(state, 100) < 0) + return -ETIMEDOUT; + + if (si21_writereg(state, LNB_CTRL_REG_1, val)) + return -EREMOTEIO; + + return 0; +} +/* 30.06.2008 */ +static int si21xx_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s\n", __func__); + val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1)); + + switch (tone) { + case SEC_TONE_ON: + return si21_writereg(state, LNB_CTRL_REG_1, val | 0x20); + + case SEC_TONE_OFF: + return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x20)); + + default: + return -EINVAL; + } +} + +static int si21xx_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + struct si21xx_state *state = fe->demodulator_priv; + + u8 val; + dprintk("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + + val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1)); + + switch (volt) { + case SEC_VOLTAGE_18: + return si21_writereg(state, LNB_CTRL_REG_1, val | 0x40); + break; + case SEC_VOLTAGE_13: + return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x40)); + break; + default: + return -EINVAL; + }; +} + +static int si21xx_init(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + int i; + int status = 0; + u8 reg1; + u8 val; + u8 reg2[2]; + + dprintk("%s\n", __func__); + + for (i = 0; ; i += 2) { + reg1 = serit_sp1511lhb_inittab[i]; + val = serit_sp1511lhb_inittab[i+1]; + if (reg1 == 0xff && val == 0xff) + break; + si21_writeregs(state, reg1, &val, 1); + } + + /*DVB QPSK SYSTEM MODE REG*/ + reg1 = 0x08; + si21_writeregs(state, SYSTEM_MODE_REG, ®1, 0x01); + + /*transport stream config*/ + /* + mode = PARALLEL; + sdata_form = LSB_FIRST; + clk_edge = FALLING_EDGE; + clk_mode = CLK_GAPPED_MODE; + strt_len = BYTE_WIDE; + sync_pol = ACTIVE_HIGH; + val_pol = ACTIVE_HIGH; + err_pol = ACTIVE_HIGH; + sclk_rate = 0x00; + parity = 0x00 ; + data_delay = 0x00; + clk_delay = 0x00; + pclk_smooth = 0x00; + */ + reg2[0] = + PARALLEL + (LSB_FIRST << 1) + + (FALLING_EDGE << 2) + (CLK_GAPPED_MODE << 3) + + (BYTE_WIDE << 4) + (ACTIVE_HIGH << 5) + + (ACTIVE_HIGH << 6) + (ACTIVE_HIGH << 7); + + reg2[1] = 0; + /* sclk_rate + (parity << 2) + + (data_delay << 3) + (clk_delay << 4) + + (pclk_smooth << 5); + */ + status |= si21_writeregs(state, TS_CTRL_REG_1, reg2, 0x02); + if (status != 0) + dprintk(" %s : TS Set Error\n", __func__); + + return 0; + +} + +static int si21_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 regs_read[2]; + u8 reg_read; + u8 i; + u8 lock; + u8 signal = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG); + + si21_readregs(state, LOCK_STATUS_REG_1, regs_read, 0x02); + reg_read = 0; + + for (i = 0; i < 7; ++i) + reg_read |= ((regs_read[0] >> i) & 0x01) << (6 - i); + + lock = ((reg_read & 0x7f) | (regs_read[1] & 0x80)); + + dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, lock); + *status = 0; + + if (signal > 10) + *status |= FE_HAS_SIGNAL; + + if (lock & 0x2) + *status |= FE_HAS_CARRIER; + + if (lock & 0x20) + *status |= FE_HAS_VITERBI; + + if (lock & 0x40) + *status |= FE_HAS_SYNC; + + if ((lock & 0x7b) == 0x7b) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int si21_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct si21xx_state *state = fe->demodulator_priv; + + /*status = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG, + (u8*)agclevel, 0x01);*/ + + u16 signal = (3 * si21_readreg(state, 0x27) * + si21_readreg(state, 0x28)); + + dprintk("%s : AGCPWR: 0x%02x%02x, signal=0x%04x\n", __func__, + si21_readreg(state, 0x27), + si21_readreg(state, 0x28), (int) signal); + + signal <<= 4; + *strength = signal; + + return 0; +} + +static int si21_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->errmode != STATUS_BER) + return 0; + + *ber = (si21_readreg(state, 0x1d) << 8) | + si21_readreg(state, 0x1e); + + return 0; +} + +static int si21_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct si21xx_state *state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((si21_readreg(state, 0x24) << 8) | + si21_readreg(state, 0x25)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + + dprintk("%s\n", __func__); + + return 0; +} + +static int si21_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->errmode != STATUS_UCBLOCKS) + *ucblocks = 0; + else + *ucblocks = (si21_readreg(state, 0x1d) << 8) | + si21_readreg(state, 0x1e); + + return 0; +} + +/* initiates a channel acquisition sequence + using the specified symbol rate and code rate */ +static int si21xx_setacquire(struct dvb_frontend *fe, int symbrate, + fe_code_rate_t crate) +{ + + struct si21xx_state *state = fe->demodulator_priv; + u8 coderates[] = { + 0x0, 0x01, 0x02, 0x04, 0x00, + 0x8, 0x10, 0x20, 0x00, 0x3f + }; + + u8 coderate_ptr; + int status; + u8 start_acq = 0x80; + u8 reg, regs[3]; + + dprintk("%s\n", __func__); + + status = PASS; + coderate_ptr = coderates[crate]; + + si21xx_set_symbolrate(fe, symbrate); + + /* write code rates to use in the Viterbi search */ + status |= si21_writeregs(state, + VIT_SRCH_CTRL_REG_1, + &coderate_ptr, 0x01); + + /* clear acq_start bit */ + status |= si21_readregs(state, ACQ_CTRL_REG_2, ®, 0x01); + reg &= ~start_acq; + status |= si21_writeregs(state, ACQ_CTRL_REG_2, ®, 0x01); + + /* use new Carrier Frequency Offset Estimator (QuickLock) */ + regs[0] = 0xCB; + regs[1] = 0x40; + regs[2] = 0xCB; + + status |= si21_writeregs(state, + TWO_DB_BNDWDTH_THRSHLD_REG, + ®s[0], 0x03); + reg = 0x56; + status |= si21_writeregs(state, + LSA_CTRL_REG_1, ®, 1); + reg = 0x05; + status |= si21_writeregs(state, + BLIND_SCAN_CTRL_REG, ®, 1); + /* start automatic acq */ + status |= si21_writeregs(state, + ACQ_CTRL_REG_2, &start_acq, 0x01); + + return status; +} + +static int si21xx_set_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int si21xx_get_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int si21xx_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *dfp) +{ + struct si21xx_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* freq Channel carrier frequency in KHz (i.e. 1550000 KHz) + datarate Channel symbol rate in Sps (i.e. 22500000 Sps)*/ + + /* in MHz */ + unsigned char coarse_tune_freq; + int fine_tune_freq; + unsigned char sample_rate = 0; + /* boolean */ + unsigned int inband_interferer_ind; + + /* INTERMEDIATE VALUES */ + int icoarse_tune_freq; /* MHz */ + int ifine_tune_freq; /* MHz */ + unsigned int band_high; + unsigned int band_low; + unsigned int x1; + unsigned int x2; + int i; + unsigned int inband_interferer_div2[ALLOWABLE_FS_COUNT] = { + FALSE, FALSE, FALSE, FALSE, FALSE, + FALSE, FALSE, FALSE, FALSE, FALSE + }; + unsigned int inband_interferer_div4[ALLOWABLE_FS_COUNT] = { + FALSE, FALSE, FALSE, FALSE, FALSE, + FALSE, FALSE, FALSE, FALSE, FALSE + }; + + int status; + + /* allowable sample rates for ADC in MHz */ + int afs[ALLOWABLE_FS_COUNT] = { 200, 192, 193, 194, 195, + 196, 204, 205, 206, 207 + }; + /* in MHz */ + int if_limit_high; + int if_limit_low; + int lnb_lo; + int lnb_uncertanity; + + int rf_freq; + int data_rate; + unsigned char regs[4]; + + dprintk("%s : FE_SET_FRONTEND\n", __func__); + + if (c->delivery_system != SYS_DVBS) { + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) + inband_interferer_div2[i] = inband_interferer_div4[i] = FALSE; + + if_limit_high = -700000; + if_limit_low = -100000; + /* in MHz */ + lnb_lo = 0; + lnb_uncertanity = 0; + + rf_freq = 10 * c->frequency ; + data_rate = c->symbol_rate / 100; + + status = PASS; + + band_low = (rf_freq - lnb_lo) - ((lnb_uncertanity * 200) + + (data_rate * 135)) / 200; + + band_high = (rf_freq - lnb_lo) + ((lnb_uncertanity * 200) + + (data_rate * 135)) / 200; + + + icoarse_tune_freq = 100000 * + (((rf_freq - lnb_lo) - + (if_limit_low + if_limit_high) / 2) + / 100000); + + ifine_tune_freq = (rf_freq - lnb_lo) - icoarse_tune_freq ; + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + x1 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) * + (afs[i] * 2500) + afs[i] * 2500; + + x2 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) * + (afs[i] * 2500); + + if (((band_low < x1) && (x1 < band_high)) || + ((band_low < x2) && (x2 < band_high))) + inband_interferer_div4[i] = TRUE; + + } + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + x1 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) * + (afs[i] * 5000) + afs[i] * 5000; + + x2 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) * + (afs[i] * 5000); + + if (((band_low < x1) && (x1 < band_high)) || + ((band_low < x2) && (x2 < band_high))) + inband_interferer_div2[i] = TRUE; + } + + inband_interferer_ind = TRUE; + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) + inband_interferer_ind &= inband_interferer_div2[i] | + inband_interferer_div4[i]; + + if (inband_interferer_ind) { + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if (inband_interferer_div2[i] == FALSE) { + sample_rate = (u8) afs[i]; + break; + } + } + } else { + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if ((inband_interferer_div2[i] | + inband_interferer_div4[i]) == FALSE) { + sample_rate = (u8) afs[i]; + break; + } + } + + } + + if (sample_rate > 207 || sample_rate < 192) + sample_rate = 200; + + fine_tune_freq = ((0x4000 * (ifine_tune_freq / 10)) / + ((sample_rate) * 1000)); + + coarse_tune_freq = (u8)(icoarse_tune_freq / 100000); + + regs[0] = sample_rate; + regs[1] = coarse_tune_freq; + regs[2] = fine_tune_freq & 0xFF; + regs[3] = fine_tune_freq >> 8 & 0xFF; + + status |= si21_writeregs(state, PLL_DIVISOR_REG, ®s[0], 0x04); + + state->fs = sample_rate;/*ADC MHz*/ + si21xx_setacquire(fe, c->symbol_rate, c->fec_inner); + + return 0; +} + +static int si21xx_sleep(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 regdata; + + dprintk("%s\n", __func__); + + si21_readregs(state, SYSTEM_MODE_REG, ®data, 0x01); + regdata |= 1 << 6; + si21_writeregs(state, SYSTEM_MODE_REG, ®data, 0x01); + state->initialised = 0; + + return 0; +} + +static void si21xx_release(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + kfree(state); +} + +static struct dvb_frontend_ops si21xx_ops = { + + .info = { + .name = "SL SI21XX DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = si21xx_release, + .init = si21xx_init, + .sleep = si21xx_sleep, + .write = si21_write, + .read_status = si21_read_status, + .read_ber = si21_read_ber, + .read_signal_strength = si21_read_signal_strength, + .read_snr = si21_read_snr, + .read_ucblocks = si21_read_ucblocks, + .diseqc_send_master_cmd = si21xx_send_diseqc_msg, + .diseqc_send_burst = si21xx_send_diseqc_burst, + .set_tone = si21xx_set_tone, + .set_voltage = si21xx_set_voltage, + + .set_property = si21xx_set_property, + .get_property = si21xx_get_property, + .set_frontend = si21xx_set_frontend, +}; + +struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, + struct i2c_adapter *i2c) +{ + struct si21xx_state *state = NULL; + int id; + + dprintk("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->errmode = STATUS_BER; + + /* check if the demod is there */ + id = si21_readreg(state, SYSTEM_MODE_REG); + si21_writereg(state, SYSTEM_MODE_REG, id | 0x40); /* standby off */ + msleep(200); + id = si21_readreg(state, 0x00); + + /* register 0x00 contains: + 0x34 for SI2107 + 0x24 for SI2108 + 0x14 for SI2109 + 0x04 for SI2110 + */ + if (id != 0x04 && id != 0x14) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &si21xx_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(si21xx_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("SL SI21XX DVB Demodulator driver"); +MODULE_AUTHOR("Igor M. Liplianin"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/si21xx.h b/drivers/media/dvb/frontends/si21xx.h new file mode 100644 index 00000000000..141b5b8a5f6 --- /dev/null +++ b/drivers/media/dvb/frontends/si21xx.h @@ -0,0 +1,37 @@ +#ifndef SI21XX_H +#define SI21XX_H + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + +struct si21xx_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* minimum delay before retuning */ + int min_delay_ms; +}; + +#if defined(CONFIG_DVB_SI21XX) || \ + (defined(CONFIG_DVB_SI21XX_MODULE) && defined(MODULE)) +extern struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *si21xx_attach( + const struct si21xx_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +static inline int si21xx_writeregister(struct dvb_frontend *fe, u8 reg, u8 val) +{ + int r = 0; + u8 buf[] = {reg, val}; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index 4543609e181..559509ab4da 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -337,7 +337,8 @@ static int sp887x_setup_frontend_parameters (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { struct sp887x_state* state = fe->demodulator_priv; - int actual_freq, err; + unsigned actual_freq; + int err; u16 val, reg0xc05; if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ && diff --git a/drivers/media/dvb/frontends/stb6000.c b/drivers/media/dvb/frontends/stb6000.c new file mode 100644 index 00000000000..0e2cb0df144 --- /dev/null +++ b/drivers/media/dvb/frontends/stb6000.c @@ -0,0 +1,255 @@ + /* + Driver for ST STB6000 DVBS Silicon tuner + + Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include <linux/module.h> +#include <linux/dvb/frontend.h> +#include <asm/types.h> + +#include "stb6000.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "stb6000: " args); \ + } while (0) + +struct stb6000_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u32 frequency; +}; + +static int stb6000_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int stb6000_sleep(struct dvb_frontend *fe) +{ + struct stb6000_priv *priv = fe->tuner_priv; + int ret; + u8 buf[] = { 10, 0 }; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int stb6000_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct stb6000_priv *priv = fe->tuner_priv; + unsigned int n, m; + int ret; + u32 freq_mhz; + int bandwidth; + u8 buf[12]; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 12 + }; + + dprintk("%s:\n", __func__); + + freq_mhz = params->frequency / 1000; + bandwidth = params->u.qpsk.symbol_rate / 1000000; + + if (bandwidth > 31) + bandwidth = 31; + + if ((freq_mhz > 949) && (freq_mhz < 2151)) { + buf[0] = 0x01; + buf[1] = 0xac; + if (freq_mhz < 1950) + buf[1] = 0xaa; + if (freq_mhz < 1800) + buf[1] = 0xa8; + if (freq_mhz < 1650) + buf[1] = 0xa6; + if (freq_mhz < 1530) + buf[1] = 0xa5; + if (freq_mhz < 1470) + buf[1] = 0xa4; + if (freq_mhz < 1370) + buf[1] = 0xa2; + if (freq_mhz < 1300) + buf[1] = 0xa1; + if (freq_mhz < 1200) + buf[1] = 0xa0; + if (freq_mhz < 1075) + buf[1] = 0xbc; + if (freq_mhz < 1000) + buf[1] = 0xba; + if (freq_mhz < 1075) { + n = freq_mhz / 8; /* vco=lo*4 */ + m = 2; + } else { + n = freq_mhz / 16; /* vco=lo*2 */ + m = 1; + } + buf[2] = n >> 1; + buf[3] = (unsigned char)(((n & 1) << 7) | + (m * freq_mhz - n * 16) | 0x60); + buf[4] = 0x04; + buf[5] = 0x0e; + + buf[6] = (unsigned char)(bandwidth); + + buf[7] = 0xd8; + buf[8] = 0xd0; + buf[9] = 0x50; + buf[10] = 0xeb; + buf[11] = 0x4f; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + udelay(10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + buf[0] = 0x07; + buf[1] = 0xdf; + buf[2] = 0xd0; + buf[3] = 0x50; + buf[4] = 0xfb; + msg.len = 5; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + udelay(10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + priv->frequency = freq_mhz * 1000; + + return (ret == 1) ? 0 : ret; + } + return -1; +} + +static int stb6000_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct stb6000_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static struct dvb_tuner_ops stb6000_tuner_ops = { + .info = { + .name = "ST STB6000", + .frequency_min = 950000, + .frequency_max = 2150000 + }, + .release = stb6000_release, + .sleep = stb6000_sleep, + .set_params = stb6000_set_params, + .get_frequency = stb6000_get_frequency, +}; + +struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c) +{ + struct stb6000_priv *priv = NULL; + u8 b0[] = { 0 }; + u8 b1[] = { 0, 0 }; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = 0, + .buf = b0, + .len = 0 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = b1, + .len = 2 + } + }; + int ret; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* is some i2c device here ? */ + ret = i2c_transfer(i2c, msg, 2); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 2) + return NULL; + + priv = kzalloc(sizeof(struct stb6000_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = addr; + priv->i2c = i2c; + + memcpy(&fe->ops.tuner_ops, &stb6000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(stb6000_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("DVB STB6000 driver"); +MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/stb6000.h b/drivers/media/dvb/frontends/stb6000.h new file mode 100644 index 00000000000..7be479c22d5 --- /dev/null +++ b/drivers/media/dvb/frontends/stb6000.h @@ -0,0 +1,51 @@ + /* + Driver for ST stb6000 DVBS Silicon tuner + + Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef __DVB_STB6000_H__ +#define __DVB_STB6000_H__ + +#include <linux/i2c.h> +#include "dvb_frontend.h" + +/** + * Attach a stb6000 tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param addr i2c address of the tuner. + * @param i2c i2c adapter to use. + * @return FE pointer on success, NULL on failure. + */ +#if defined(CONFIG_DVB_STB6000) || (defined(CONFIG_DVB_STB6000_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, + int addr, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_STB6000 */ + +#endif /* __DVB_STB6000_H__ */ diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c new file mode 100644 index 00000000000..ff1194de34c --- /dev/null +++ b/drivers/media/dvb/frontends/stv0288.c @@ -0,0 +1,618 @@ +/* + Driver for ST STV0288 demodulator + Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de + for Reel Multimedia + Copyright (C) 2008 TurboSight.com, Bob Liu <bob@turbosight.com> + Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by> + Removed stb6000 specific tuner code and revised some + procedures. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <asm/div64.h> + +#include "dvb_frontend.h" +#include "stv0288.h" + +struct stv0288_state { + struct i2c_adapter *i2c; + const struct stv0288_config *config; + struct dvb_frontend frontend; + + u8 initialised:1; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + int errmode; +}; + +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +static int debug_legacy_dish_switch; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "stv0288: " args); \ + } while (0) + + +static int stv0288_writeregI(struct stv0288_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int stv0288_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return stv0288_writeregI(state, buf[0], buf[1]); +} + +static u8 stv0288_readreg(struct stv0288_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int stv0288_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct stv0288_state *state = fe->demodulator_priv; + unsigned int temp; + unsigned char b[3]; + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + temp = (unsigned int)srate / 1000; + + temp = temp * 32768; + temp = temp / 25; + temp = temp / 125; + b[0] = (unsigned char)((temp >> 12) & 0xff); + b[1] = (unsigned char)((temp >> 4) & 0xff); + b[2] = (unsigned char)((temp << 4) & 0xf0); + stv0288_writeregI(state, 0x28, 0x80); /* SFRH */ + stv0288_writeregI(state, 0x29, 0); /* SFRM */ + stv0288_writeregI(state, 0x2a, 0); /* SFRL */ + + stv0288_writeregI(state, 0x28, b[0]); + stv0288_writeregI(state, 0x29, b[1]); + stv0288_writeregI(state, 0x2a, b[2]); + dprintk("stv0288: stv0288_set_symbolrate\n"); + + return 0; +} + +static int stv0288_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct stv0288_state *state = fe->demodulator_priv; + + int i; + + dprintk("%s\n", __func__); + + stv0288_writeregI(state, 0x09, 0); + msleep(30); + stv0288_writeregI(state, 0x05, 0x16); + + for (i = 0; i < m->msg_len; i++) { + if (stv0288_writeregI(state, 0x06, m->msg[i])) + return -EREMOTEIO; + msleep(12); + } + + return 0; +} + +static int stv0288_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct stv0288_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (stv0288_writeregI(state, 0x05, 0x16))/* burst mode */ + return -EREMOTEIO; + + if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff)) + return -EREMOTEIO; + + if (stv0288_writeregI(state, 0x06, 0x12)) + return -EREMOTEIO; + + return 0; +} + +static int stv0288_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct stv0288_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode */ + return -EREMOTEIO; + return stv0288_writeregI(state, 0x06, 0xff); + + case SEC_TONE_OFF: + if (stv0288_writeregI(state, 0x05, 0x13))/* burst mode */ + return -EREMOTEIO; + return stv0288_writeregI(state, 0x06, 0x00); + + default: + return -EINVAL; + } +} + +static u8 stv0288_inittab[] = { + 0x01, 0x15, + 0x02, 0x20, + 0x09, 0x0, + 0x0a, 0x4, + 0x0b, 0x0, + 0x0c, 0x0, + 0x0d, 0x0, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x80, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x0, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x0, + 0x23, 0x0, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x0, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbe, + 0x3a, 0x0, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x60, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x38, + 0x52, 0x21, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x0, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x0, + 0x5f, 0xff, + 0x70, 0x0, + 0x71, 0x0, + 0x72, 0x0, + 0x74, 0x0, + 0x75, 0x0, + 0x76, 0x0, + 0x81, 0x0, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x0, + 0x85, 0x0, + 0x88, 0x0, + 0x89, 0x0, + 0x8a, 0x0, + 0x8b, 0x0, + 0x8c, 0x0, + 0x90, 0x0, + 0x91, 0x0, + 0x92, 0x0, + 0x93, 0x0, + 0x94, 0x1c, + 0x97, 0x0, + 0xa0, 0x48, + 0xa1, 0x0, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x0, + 0xf0, 0x0, + 0xf1, 0x0, + 0xf2, 0xc0, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0xff, 0xff, +}; + +static int stv0288_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + dprintk("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + return 0; +} + +static int stv0288_init(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + int i; + u8 reg; + u8 val; + + dprintk("stv0288: init chip\n"); + stv0288_writeregI(state, 0x41, 0x04); + msleep(50); + + /* we have default inittab */ + if (state->config->inittab == NULL) { + for (i = 0; !(stv0288_inittab[i] == 0xff && + stv0288_inittab[i + 1] == 0xff); i += 2) + stv0288_writeregI(state, stv0288_inittab[i], + stv0288_inittab[i + 1]); + } else { + for (i = 0; ; i += 2) { + reg = state->config->inittab[i]; + val = state->config->inittab[i+1]; + if (reg == 0xff && val == 0xff) + break; + stv0288_writeregI(state, reg, val); + } + } + return 0; +} + +static int stv0288_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct stv0288_state *state = fe->demodulator_priv; + + u8 sync = stv0288_readreg(state, 0x24); + if (sync == 255) + sync = 0; + + dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync); + + *status = 0; + + if ((sync & 0x08) == 0x08) { + *status |= FE_HAS_LOCK; + dprintk("stv0288 has locked\n"); + } + + return 0; +} + +static int stv0288_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return 0; + *ber = (stv0288_readreg(state, 0x26) << 8) | + stv0288_readreg(state, 0x27); + dprintk("stv0288_read_ber %d\n", *ber); + + return 0; +} + + +static int stv0288_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stv0288_state *state = fe->demodulator_priv; + + s32 signal = 0xffff - ((stv0288_readreg(state, 0x10) << 8)); + + + signal = signal * 5 / 4; + *strength = (signal > 0xffff) ? 0xffff : (signal < 0) ? 0 : signal; + dprintk("stv0288_read_signal_strength %d\n", *strength); + + return 0; +} +static int stv0288_sleep(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + + stv0288_writeregI(state, 0x41, 0x84); + state->initialised = 0; + + return 0; +} +static int stv0288_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct stv0288_state *state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((stv0288_readreg(state, 0x2d) << 8) + | stv0288_readreg(state, 0x2e)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + dprintk("stv0288_read_snr %d\n", *snr); + + return 0; +} + +static int stv0288_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return 0; + *ucblocks = (stv0288_readreg(state, 0x26) << 8) | + stv0288_readreg(state, 0x27); + dprintk("stv0288_read_ber %d\n", *ucblocks); + + return 0; +} + +static int stv0288_set_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int stv0288_get_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int stv0288_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *dfp) +{ + struct stv0288_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + char tm; + unsigned char tda[3]; + + dprintk("%s : FE_SET_FRONTEND\n", __func__); + + if (c->delivery_system != SYS_DVBS) { + dprintk("%s: unsupported delivery " + "system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* only frequency & symbol_rate are used for tuner*/ + dfp->frequency = c->frequency; + dfp->u.qpsk.symbol_rate = c->symbol_rate; + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, dfp); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + udelay(10); + stv0288_set_symbolrate(fe, c->symbol_rate); + /* Carrier lock control register */ + stv0288_writeregI(state, 0x15, 0xc5); + + tda[0] = 0x2b; /* CFRM */ + tda[2] = 0x0; /* CFRL */ + for (tm = -6; tm < 7;) { + /* Viterbi status */ + if (stv0288_readreg(state, 0x24) & 0x80) + break; + + tda[2] += 40; + if (tda[2] < 40) + tm++; + tda[1] = (unsigned char)tm; + stv0288_writeregI(state, 0x2b, tda[1]); + stv0288_writeregI(state, 0x2c, tda[2]); + udelay(30); + } + + state->tuner_frequency = c->frequency; + state->fec_inner = FEC_AUTO; + state->symbol_rate = c->symbol_rate; + + return 0; +} + +static int stv0288_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (enable) + stv0288_writeregI(state, 0x01, 0xb5); + else + stv0288_writeregI(state, 0x01, 0x35); + + udelay(1); + + return 0; +} + +static void stv0288_release(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops stv0288_ops = { + + .info = { + .name = "ST STV0288 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = stv0288_release, + .init = stv0288_init, + .sleep = stv0288_sleep, + .write = stv0288_write, + .i2c_gate_ctrl = stv0288_i2c_gate_ctrl, + .read_status = stv0288_read_status, + .read_ber = stv0288_read_ber, + .read_signal_strength = stv0288_read_signal_strength, + .read_snr = stv0288_read_snr, + .read_ucblocks = stv0288_read_ucblocks, + .diseqc_send_master_cmd = stv0288_send_diseqc_msg, + .diseqc_send_burst = stv0288_send_diseqc_burst, + .set_tone = stv0288_set_tone, + .set_voltage = stv0288_set_voltage, + + .set_property = stv0288_set_property, + .get_property = stv0288_get_property, + .set_frontend = stv0288_set_frontend, +}; + +struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c) +{ + struct stv0288_state *state = NULL; + int id; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + state->errmode = STATUS_BER; + + stv0288_writeregI(state, 0x41, 0x04); + msleep(200); + id = stv0288_readreg(state, 0x00); + dprintk("stv0288 id %x\n", id); + + /* register 0x00 contains 0x11 for STV0288 */ + if (id != 0x11) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &stv0288_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(stv0288_attach); + +module_param(debug_legacy_dish_switch, int, 0444); +MODULE_PARM_DESC(debug_legacy_dish_switch, + "Enable timing analysis for Dish Network legacy switches"); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("ST STV0288 DVB Demodulator driver"); +MODULE_AUTHOR("Georg Acher, Bob Liu, Igor liplianin"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb/frontends/stv0288.h b/drivers/media/dvb/frontends/stv0288.h new file mode 100644 index 00000000000..f2b53db0606 --- /dev/null +++ b/drivers/media/dvb/frontends/stv0288.h @@ -0,0 +1,67 @@ +/* + Driver for ST STV0288 demodulator + + Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de + for Reel Multimedia + Copyright (C) 2008 TurboSight.com, <bob@turbosight.com> + Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by> + Removed stb6000 specific tuner code and revised some + procedures. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef STV0288_H +#define STV0288_H + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + +struct stv0288_config { + /* the demodulator's i2c address */ + u8 demod_address; + + u8* inittab; + + /* minimum delay before retuning */ + int min_delay_ms; + + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); +}; + +#if defined(CONFIG_DVB_STV0288) || (defined(CONFIG_DVB_STV0288_MODULE) && \ + defined(MODULE)) +extern struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_STV0288 */ + +static inline int stv0288_writereg(struct dvb_frontend *fe, u8 reg, u8 val) +{ + int r = 0; + u8 buf[] = { reg, val }; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif /* STV0288_H */ diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 35435bef8e7..6c1cb1973c6 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -559,6 +559,8 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par int invval = 0; dprintk ("%s : FE_SET_FRONTEND\n", __func__); + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); // set the inversion if (p->inversion == INVERSION_OFF) invval = 0; diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h index 3282f43022f..0fd96e22b65 100644 --- a/drivers/media/dvb/frontends/stv0299.h +++ b/drivers/media/dvb/frontends/stv0299.h @@ -89,15 +89,18 @@ struct stv0299_config int min_delay_ms; /* Set the symbol rate */ - int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio); + int (*set_symbol_rate)(struct dvb_frontend *fe, u32 srate, u32 ratio); + + /* Set device param to start dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); }; #if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE)) -extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, - struct i2c_adapter* i2c); +extern struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, + struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c index 04e7f1cc140..2a8bbcd44cd 100644 --- a/drivers/media/dvb/frontends/tda10048.c +++ b/drivers/media/dvb/frontends/tda10048.c @@ -195,7 +195,7 @@ static struct init_tab { static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) { int ret; - u8 buf [] = { reg, data }; + u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; @@ -213,9 +213,9 @@ static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) static u8 tda10048_readreg(struct tda10048_state *state, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0 }; - struct i2c_msg msg [] = { + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, { .addr = state->config->demod_address, @@ -393,43 +393,89 @@ static int tda10048_get_tps(struct tda10048_state *state, val = tda10048_readreg(state, TDA10048_OUT_CONF2); switch ((val & 0x60) >> 5) { - case 0: p->constellation = QPSK; break; - case 1: p->constellation = QAM_16; break; - case 2: p->constellation = QAM_64; break; + case 0: + p->constellation = QPSK; + break; + case 1: + p->constellation = QAM_16; + break; + case 2: + p->constellation = QAM_64; + break; } switch ((val & 0x18) >> 3) { - case 0: p->hierarchy_information = HIERARCHY_NONE; break; - case 1: p->hierarchy_information = HIERARCHY_1; break; - case 2: p->hierarchy_information = HIERARCHY_2; break; - case 3: p->hierarchy_information = HIERARCHY_4; break; + case 0: + p->hierarchy_information = HIERARCHY_NONE; + break; + case 1: + p->hierarchy_information = HIERARCHY_1; + break; + case 2: + p->hierarchy_information = HIERARCHY_2; + break; + case 3: + p->hierarchy_information = HIERARCHY_4; + break; } switch (val & 0x07) { - case 0: p->code_rate_HP = FEC_1_2; break; - case 1: p->code_rate_HP = FEC_2_3; break; - case 2: p->code_rate_HP = FEC_3_4; break; - case 3: p->code_rate_HP = FEC_5_6; break; - case 4: p->code_rate_HP = FEC_7_8; break; + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; } val = tda10048_readreg(state, TDA10048_OUT_CONF3); switch (val & 0x07) { - case 0: p->code_rate_LP = FEC_1_2; break; - case 1: p->code_rate_LP = FEC_2_3; break; - case 2: p->code_rate_LP = FEC_3_4; break; - case 3: p->code_rate_LP = FEC_5_6; break; - case 4: p->code_rate_LP = FEC_7_8; break; + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; } val = tda10048_readreg(state, TDA10048_OUT_CONF1); switch ((val & 0x0c) >> 2) { - case 0: p->guard_interval = GUARD_INTERVAL_1_32; break; - case 1: p->guard_interval = GUARD_INTERVAL_1_16; break; - case 2: p->guard_interval = GUARD_INTERVAL_1_8; break; - case 3: p->guard_interval = GUARD_INTERVAL_1_4; break; + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; } switch (val & 0x02) { - case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break; - case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break; + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; } return 0; diff --git a/drivers/media/dvb/frontends/tdhd1.h b/drivers/media/dvb/frontends/tdhd1.h new file mode 100644 index 00000000000..51f17067865 --- /dev/null +++ b/drivers/media/dvb/frontends/tdhd1.h @@ -0,0 +1,73 @@ +/* + * tdhd1.h - ALPS TDHD1-204A tuner support + * + * Copyright (C) 2008 Oliver Endriss <o.endriss@gmx.de> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * The project's page is at http://www.linuxtv.org + */ + +#ifndef TDHD1_H +#define TDHD1_H + +#include "tda1004x.h" + +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name); + +static struct tda1004x_config alps_tdhd1_204a_config = { + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .request_firmware = alps_tdhd1_204_request_firmware +}; + +static int alps_tdhd1_204a_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct i2c_adapter *i2c = fe->tuner_priv; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + u32 div; + + div = (params->frequency + 36166666) / 166666; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85; + + if (params->frequency >= 174000000 && params->frequency <= 230000000) + data[3] = 0x02; + else if (params->frequency >= 470000000 && params->frequency <= 823000000) + data[3] = 0x0C; + else if (params->frequency > 823000000 && params->frequency <= 862000000) + data[3] = 0x8C; + else + return -EINVAL; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + + return 0; +} + +#endif /* TDHD1_H */ diff --git a/drivers/media/dvb/frontends/z0194a.h b/drivers/media/dvb/frontends/z0194a.h index d2876d2e176..07f3fc0998f 100644 --- a/drivers/media/dvb/frontends/z0194a.h +++ b/drivers/media/dvb/frontends/z0194a.h @@ -12,7 +12,7 @@ #ifndef Z0194A #define Z0194A -static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe, +static int sharp_z0194a_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) { u8 aclk = 0; @@ -40,7 +40,7 @@ static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe, return 0; } -static u8 sharp_z0194a__inittab[] = { +static u8 sharp_z0194a_inittab[] = { 0x01, 0x15, 0x02, 0x00, 0x03, 0x00, @@ -82,16 +82,4 @@ static u8 sharp_z0194a__inittab[] = { 0xff, 0xff }; -static struct stv0299_config sharp_z0194a_config = { - .demod_address = 0x68, - .inittab = sharp_z0194a__inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = sharp_z0194a__set_symbol_rate, -}; - #endif diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 9da260fe3fd..6f9b7736044 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -42,6 +42,10 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5510), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0x5520), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0x5530), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5580), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5590), diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 41b5a988b61..867027ceab3 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -86,6 +86,7 @@ config DVB_BUDGET select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_TDA1004X if !DVB_FE_CUSTOMISE help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard MPEG2 decoder, and without diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 0777e8f9544..c7c770c2898 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -88,6 +88,7 @@ static int budgetpatch; static int wss_cfg_4_3 = 0x4008; static int wss_cfg_16_9 = 0x0007; static int tv_standard; +static int full_ts; module_param_named(debug, av7110_debug, int, 0644); MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)"); @@ -106,6 +107,8 @@ module_param(volume, int, 0444); MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)"); module_param(budgetpatch, int, 0444); MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)"); +module_param(full_ts, int, 0444); +MODULE_PARM_DESC(full_ts, "enable code for full-ts hardware modification: 0 disable (default), 1 enable"); module_param(wss_cfg_4_3, int, 0444); MODULE_PARM_DESC(wss_cfg_4_3, "WSS 4:3 - default 0x4008 - bit 15: disable, 14: burst mode, 13..0: wss data"); module_param(wss_cfg_16_9, int, 0444); @@ -116,6 +119,8 @@ MODULE_PARM_DESC(tv_standard, "TV standard: 0 PAL (default), 1 NTSC"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static void restart_feeds(struct av7110 *av7110); +static int budget_start_feed(struct dvb_demux_feed *feed); +static int budget_stop_feed(struct dvb_demux_feed *feed); static int av7110_num; @@ -376,9 +381,9 @@ static inline void start_debi_dma(struct av7110 *av7110, int dir, irdebi(av7110, DEBISWAB, addr, 0, len); } -static void debiirq(unsigned long data) +static void debiirq(unsigned long cookie) { - struct av7110 *av7110 = (struct av7110 *) data; + struct av7110 *av7110 = (struct av7110 *)cookie; int type = av7110->debitype; int handle = (type >> 8) & 0x1f; unsigned int xfer = 0; @@ -487,9 +492,9 @@ debi_done: } /* irq from av7110 firmware writing the mailbox register in the DPRAM */ -static void gpioirq(unsigned long data) +static void gpioirq(unsigned long cookie) { - struct av7110 *av7110 = (struct av7110 *) data; + struct av7110 *av7110 = (struct av7110 *)cookie; u32 rxbuf, txbuf; int len; @@ -806,6 +811,9 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) dprintk(4, "%p\n", av7110); + if (av7110->full_ts) + return 0; + if (dvbdmxfilter->type == DMX_TYPE_SEC) { if (hw_sections) { buf[4] = (dvbdmxfilter->filter.filter_value[0] << 8) | @@ -854,6 +862,9 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) dprintk(4, "%p\n", av7110); + if (av7110->full_ts) + return 0; + handle = dvbdmxfilter->hw_handle; if (handle >= 32) { printk("%s tried to stop invalid filter %04x, filter type = %x\n", @@ -913,7 +924,7 @@ static int dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) return ret; } - if ((dvbdmxfeed->ts_type & TS_PACKET)) { + if ((dvbdmxfeed->ts_type & TS_PACKET) && !av7110->full_ts) { if (dvbdmxfeed->pes_type == 0 && !(dvbdmx->pids[0] & 0x8000)) ret = av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed); if (dvbdmxfeed->pes_type == 1 && !(dvbdmx->pids[1] & 0x8000)) @@ -974,7 +985,7 @@ static int av7110_start_feed(struct dvb_demux_feed *feed) if (!demux->dmx.frontend) return -EINVAL; - if (feed->pid > 0x1fff) + if (!av7110->full_ts && feed->pid > 0x1fff) return -EINVAL; if (feed->type == DMX_TYPE_TS) { @@ -1003,7 +1014,12 @@ static int av7110_start_feed(struct dvb_demux_feed *feed) } } - else if (feed->type == DMX_TYPE_SEC) { + if (av7110->full_ts) { + budget_start_feed(feed); + return ret; + } + + if (feed->type == DMX_TYPE_SEC) { int i; for (i = 0; i < demux->filternum; i++) { @@ -1050,7 +1066,12 @@ static int av7110_stop_feed(struct dvb_demux_feed *feed) ret = StopHWFilter(feed->filter); } - if (!ret && feed->type == DMX_TYPE_SEC) { + if (av7110->full_ts) { + budget_stop_feed(feed); + return ret; + } + + if (feed->type == DMX_TYPE_SEC) { for (i = 0; i<demux->filternum; i++) { if (demux->filter[i].state == DMX_STATE_GO && demux->filter[i].filter.parent == &feed->feed.sec) { @@ -1074,6 +1095,7 @@ static void restart_feeds(struct av7110 *av7110) struct dvb_demux *dvbdmx = &av7110->demux; struct dvb_demux_feed *feed; int mode; + int feeding; int i, j; dprintk(4, "%p\n", av7110); @@ -1082,6 +1104,8 @@ static void restart_feeds(struct av7110 *av7110) av7110->playing = 0; av7110->rec_mode = 0; + feeding = av7110->feeding1; /* full_ts mod */ + for (i = 0; i < dvbdmx->feednum; i++) { feed = &dvbdmx->feed[i]; if (feed->state == DMX_STATE_GO) { @@ -1099,6 +1123,8 @@ static void restart_feeds(struct av7110 *av7110) } } + av7110->feeding1 = feeding; /* full_ts mod */ + if (mode) av7110_av_start_play(av7110, mode); } @@ -1197,8 +1223,9 @@ static int start_ts_capture(struct av7110 *budget) if (budget->feeding1) return ++budget->feeding1; - memset(budget->grabbing, 0x00, TS_HEIGHT * TS_WIDTH); + memset(budget->grabbing, 0x00, TS_BUFLEN); budget->ttbp = 0; + SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ saa7146_write(budget->dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ return ++budget->feeding1; @@ -1233,18 +1260,14 @@ static int budget_stop_feed(struct dvb_demux_feed *feed) return status; } -static void vpeirq(unsigned long data) +static void vpeirq(unsigned long cookie) { - struct av7110 *budget = (struct av7110 *) data; + struct av7110 *budget = (struct av7110 *)cookie; u8 *mem = (u8 *) (budget->grabbing); u32 olddma = budget->ttbp; u32 newdma = saa7146_read(budget->dev, PCI_VDP3); + struct dvb_demux *demux = budget->full_ts ? &budget->demux : &budget->demux1; - if (!budgetpatch) { - printk("av7110.c: vpeirq() called while budgetpatch disabled!" - " check saa7146 IER register\n"); - BUG(); - } /* nearest lower position divisible by 188 */ newdma -= newdma % 188; @@ -1268,11 +1291,11 @@ static void vpeirq(unsigned long data) if (newdma > olddma) /* no wraparound, dump olddma..newdma */ - dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (newdma - olddma) / 188); + dvb_dmx_swfilter_packets(demux, mem + olddma, (newdma - olddma) / 188); else { /* wraparound, dump olddma..buflen and 0..newdma */ - dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (TS_BUFLEN - olddma) / 188); - dvb_dmx_swfilter_packets(&budget->demux1, mem, newdma / 188); + dvb_dmx_swfilter_packets(demux, mem + olddma, (TS_BUFLEN - olddma) / 188); + dvb_dmx_swfilter_packets(demux, mem, newdma / 188); } } @@ -1294,8 +1317,8 @@ static int av7110_register(struct av7110 *av7110) for (i = 0; i < 32; i++) av7110->handle2filter[i] = NULL; - dvbdemux->filternum = 32; - dvbdemux->feednum = 32; + dvbdemux->filternum = (av7110->full_ts) ? 256 : 32; + dvbdemux->feednum = (av7110->full_ts) ? 256 : 32; dvbdemux->start_feed = av7110_start_feed; dvbdemux->stop_feed = av7110_stop_feed; dvbdemux->write_to_decoder = av7110_write_to_decoder; @@ -1305,7 +1328,7 @@ static int av7110_register(struct av7110 *av7110) dvb_dmx_init(&av7110->demux); av7110->demux.dmx.get_stc = dvb_get_stc; - av7110->dmxdev.filternum = 32; + av7110->dmxdev.filternum = (av7110->full_ts) ? 256 : 32; av7110->dmxdev.demux = &dvbdemux->dmx; av7110->dmxdev.capabilities = 0; @@ -1422,7 +1445,6 @@ int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val) return i2c_transfer(&av7110->i2c_adap, &msgs, 1); } -#if 0 u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg) { u8 mm1[] = {0x00}; @@ -1439,7 +1461,6 @@ u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg) return mm2[0]; } -#endif /**************************************************************************** * INITIALIZATION @@ -2256,7 +2277,7 @@ static int frontend_init(struct av7110 *av7110) if (!av7110->fe) { /* FIXME: propagate the failure code from the lower layers */ ret = -ENOMEM; - printk("dvb-ttpci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", av7110->dev->pci->vendor, av7110->dev->pci->device, av7110->dev->pci->subsystem_vendor, @@ -2484,7 +2505,47 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, av7110->dvb_adapter.proposed_mac); ret = -ENOMEM; - if (budgetpatch) { + /* full-ts mod? */ + if (full_ts) + av7110->full_ts = true; + + /* check for full-ts flag in eeprom */ + if (i2c_readreg(av7110, 0xaa, 0) == 0x4f && i2c_readreg(av7110, 0xaa, 1) == 0x45) { + u8 flags = i2c_readreg(av7110, 0xaa, 2); + if (flags != 0xff && (flags & 0x01)) + av7110->full_ts = true; + } + + if (av7110->full_ts) { + printk(KERN_INFO "dvb-ttpci: full-ts mode enabled for saa7146 port B\n"); + spin_lock_init(&av7110->feedlock1); + av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, + &av7110->pt); + if (!av7110->grabbing) + goto err_i2c_del_3; + + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + + saa7146_write(dev, DD1_INIT, 0x00000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + saa7146_write(dev, BRS_CTRL, 0x60000000); + saa7146_write(dev, MC2, MASK_08 | MASK_24); + + /* dma3 */ + saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); + saa7146_write(dev, BASE_ODD3, 0); + saa7146_write(dev, BASE_EVEN3, 0); + saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT); + saa7146_write(dev, PITCH3, TS_WIDTH); + saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90); + saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH); + saa7146_write(dev, MC2, MASK_04 | MASK_20); + + tasklet_init(&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110); + + } else if (budgetpatch) { spin_lock_init(&av7110->feedlock1); av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, &av7110->pt); @@ -2710,11 +2771,13 @@ static int __devexit av7110_detach(struct saa7146_dev* saa) #if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE) av7110_ir_exit(av7110); #endif - if (budgetpatch) { - /* Disable RPS1 */ - saa7146_write(saa, MC1, MASK_29); - /* VSYNC LOW (inactive) */ - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + if (budgetpatch || av7110->full_ts) { + if (budgetpatch) { + /* Disable RPS1 */ + saa7146_write(saa, MC1, MASK_29); + /* VSYNC LOW (inactive) */ + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } saa7146_write(saa, MC1, MASK_20); /* DMA3 off */ SAA7146_IER_DISABLE(saa, MASK_10); SAA7146_ISR_CLEAR(saa, MASK_10); @@ -2794,7 +2857,7 @@ static void av7110_irq(struct saa7146_dev* dev, u32 *isr) tasklet_schedule(&av7110->gpio_tasklet); } - if ((*isr & MASK_10) && budgetpatch) + if (*isr & MASK_10) tasklet_schedule(&av7110->vpe_tasklet); } diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h index 55f23ddcb99..d85b8512ac3 100644 --- a/drivers/media/dvb/ttpci/av7110.h +++ b/drivers/media/dvb/ttpci/av7110.h @@ -192,6 +192,7 @@ struct av7110 { unsigned char *grabbing; struct saa7146_pgtable pt; struct tasklet_struct vpe_tasklet; + bool full_ts; int fe_synced; struct mutex pid_mutex; diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 184647ad1c7..bdc62acf209 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -788,6 +788,9 @@ int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t l dprintk(2, "av7110:%p, \n", av7110); + if (av7110->full_ts && demux->dmx.frontend->source != DMX_MEMORY_FE) + return 0; + switch (feed->pes_type) { case 0: if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index b7d1f2f18d3..1032ea77837 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -57,6 +57,8 @@ #define SLOTSTATUS_READY 8 #define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct budget_av { struct budget budget; struct video_device *vd; @@ -1049,7 +1051,7 @@ static void frontend_init(struct budget_av *budget_av) if (fe == NULL) { printk(KERN_ERR "budget-av: A frontend driver was not found " - "for device %04x/%04x subsystem %04x/%04x\n", + "for device [%04x:%04x] subsystem [%04x:%04x]\n", saa->pci->vendor, saa->pci->device, saa->pci->subsystem_vendor, @@ -1127,7 +1129,9 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio dev->ext_priv = budget_av; - if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) { + err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) { kfree(budget_av); return err; } diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 060e7c78532..0a5aad45435 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -92,6 +92,8 @@ static int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct budget_ci_ir { struct input_dev *dev; struct tasklet_struct msp430_irq_tasklet; @@ -1153,7 +1155,7 @@ static void frontend_init(struct budget_ci *budget_ci) } if (budget_ci->budget.dvb_frontend == NULL) { - printk("budget-ci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget_ci->budget.dev->pci->vendor, budget_ci->budget.dev->pci->device, budget_ci->budget.dev->pci->subsystem_vendor, @@ -1183,7 +1185,8 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio dev->ext_priv = budget_ci; - err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE); + err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, + adapter_nr); if (err) goto out2; diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index 6f4ddb643fe..ba18e56d5f1 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -57,8 +57,6 @@ module_param_named(bufsize, dma_buffer_size, int, 0444); MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - /**************************************************************************** * TT budget / WinTV Nova ****************************************************************************/ @@ -411,7 +409,7 @@ static void budget_unregister(struct budget *budget) int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, struct saa7146_pci_extension_data *info, - struct module *owner) + struct module *owner, short *adapter_nums) { int ret = 0; struct budget_info *bi = info->ext_priv; @@ -474,7 +472,7 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, - owner, &budget->dev->pci->dev, adapter_nr); + owner, &budget->dev->pci->dev, adapter_nums); if (ret < 0) return ret; diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index aa5ed4ef19f..60136688a9a 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -39,6 +39,8 @@ #include "bsru6.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define budget_patch budget static struct saa7146_extension budget_extension; @@ -360,7 +362,7 @@ static void frontend_init(struct budget_patch* budget) } if (budget->dvb_frontend == NULL) { - printk("dvb-ttpci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget->dev->pci->vendor, budget->dev->pci->device, budget->dev->pci->subsystem_vendor, @@ -592,8 +594,9 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte dprintk(2, "budget: %p\n", budget); - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { - kfree (budget); + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { + kfree(budget); return err; } diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index f0068996ac0..1638e1d9f53 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -46,11 +46,14 @@ #include "lnbp21.h" #include "bsru6.h" #include "bsbe1.h" +#include "tdhd1.h" static int diseqc_method; module_param(diseqc_method, int, 0444); MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static void Set22K (struct budget *budget, int state) { struct saa7146_dev *dev=budget->dev; @@ -390,6 +393,13 @@ static struct stv0299_config alps_bsbe1_config_activy = { .set_symbol_rate = alps_bsbe1_set_symbol_rate, }; +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) +{ + struct budget *budget = (struct budget *)fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) { @@ -511,6 +521,14 @@ static void frontend_init(struct budget *budget) } break; + case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ + budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + } + break; + case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); if (budget->dvb_frontend) { @@ -550,7 +568,7 @@ static void frontend_init(struct budget *budget) } if (budget->dvb_frontend == NULL) { - printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget->dev->pci->vendor, budget->dev->pci->device, budget->dev->pci->subsystem_vendor, @@ -582,7 +600,8 @@ static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_ dev->ext_priv = budget; - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { printk("==> failed\n"); kfree (budget); return err; @@ -624,6 +643,7 @@ MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), @@ -634,6 +654,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), + MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), { .vendor = 0, diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h index dd450b739bf..86435bf1626 100644 --- a/drivers/media/dvb/ttpci/budget.h +++ b/drivers/media/dvb/ttpci/budget.h @@ -109,7 +109,7 @@ static struct saa7146_pci_extension_data x_var = { \ extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, struct saa7146_pci_extension_data *info, - struct module *owner); + struct module *owner, short *adapter_nums); extern void ttpci_budget_init_hooks(struct budget *budget); extern int ttpci_budget_deinit(struct budget *budget); extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr); diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index e6c9cd2e3b9..66ab0c6e978 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1614,7 +1614,7 @@ static void frontend_init(struct ttusb* ttusb) } if (ttusb->fe == NULL) { - printk("dvb-ttusb-budget: A frontend driver was not found for device %04x/%04x\n", + printk("dvb-ttusb-budget: A frontend driver was not found for device [%04x:%04x]\n", le16_to_cpu(ttusb->dev->descriptor.idVendor), le16_to_cpu(ttusb->dev->descriptor.idProduct)); } else { diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index de5829b863f..ab33fec8a19 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1665,7 +1665,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, } if (dec->fe == NULL) { - printk("dvb-ttusb-dec: A frontend driver was not found for device %04x/%04x\n", + printk("dvb-ttusb-dec: A frontend driver was not found for device [%04x:%04x]\n", le16_to_cpu(dec->udev->descriptor.idVendor), le16_to_cpu(dec->udev->descriptor.idProduct)); } else { diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index 443af24097f..21260aad1e5 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -38,7 +38,17 @@ struct ttusbdecfe_state { }; -static int ttusbdecfe_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int ttusbdecfe_dvbs_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | + FE_HAS_SYNC | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; +} + + +static int ttusbdecfe_dvbt_read_status(struct dvb_frontend *fe, + fe_status_t *status) { struct ttusbdecfe_state* state = fe->demodulator_priv; u8 b[] = { 0x00, 0x00, 0x00, 0x00, @@ -251,7 +261,7 @@ static struct dvb_frontend_ops ttusbdecfe_dvbt_ops = { .get_tune_settings = ttusbdecfe_dvbt_get_tune_settings, - .read_status = ttusbdecfe_read_status, + .read_status = ttusbdecfe_dvbt_read_status, }; static struct dvb_frontend_ops ttusbdecfe_dvbs_ops = { @@ -273,7 +283,7 @@ static struct dvb_frontend_ops ttusbdecfe_dvbs_ops = { .set_frontend = ttusbdecfe_dvbs_set_frontend, - .read_status = ttusbdecfe_read_status, + .read_status = ttusbdecfe_dvbs_read_status, .diseqc_send_master_cmd = ttusbdecfe_dvbs_diseqc_send_master_cmd, .set_voltage = ttusbdecfe_dvbs_set_voltage, diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 1b41b3f77cf..04cd7c04bdd 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -359,6 +359,18 @@ config USB_SI470X computer's USB port. To compile this driver as a module, choose M here: the - module will be called radio-silabs. + module will be called radio-si470x. + +config USB_MR800 + tristate "AverMedia MR 800 USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called radio-mr800. endif # RADIO_ADAPTERS diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index 7ca71ab96b4..240ec63cdaf 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_SI470X) += radio-si470x.o +obj-$(CONFIG_USB_MR800) += radio-mr800.o EXTRA_CFLAGS += -Isound diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 70c65a74592..78f56944e64 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -274,7 +274,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -306,18 +306,18 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); radio->curfreq = f->frequency; if (dsbr100_setfreq(radio, radio->curfreq)==-1) - warn("Set frequency failed"); + dev_warn(&radio->usbdev->dev, "Set frequency failed\n"); return 0; } static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = radio->curfreq; @@ -342,7 +342,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -355,16 +355,22 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: if (ctrl->value) { - if (dsbr100_stop(radio)==-1) - warn("Radio did not respond properly"); + if (dsbr100_stop(radio) == -1) { + dev_warn(&radio->usbdev->dev, + "Radio did not respond properly\n"); + return -EBUSY; + } } else { - if (dsbr100_start(radio)==-1) - warn("Radio did not respond properly"); + if (dsbr100_start(radio) == -1) { + dev_warn(&radio->usbdev->dev, + "Radio did not respond properly\n"); + return -EBUSY; + } } return 0; } @@ -405,23 +411,27 @@ static int vidioc_s_audio(struct file *file, void *priv, static int usb_dsbr100_open(struct inode *inode, struct file *file) { - struct dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); + lock_kernel(); radio->users = 1; radio->muted = 1; if (dsbr100_start(radio)<0) { - warn("Radio did not start up properly"); + dev_warn(&radio->usbdev->dev, + "Radio did not start up properly\n"); radio->users = 0; + unlock_kernel(); return -EIO; } dsbr100_setfreq(radio, radio->curfreq); + unlock_kernel(); return 0; } static int usb_dsbr100_close(struct inode *inode, struct file *file) { - struct dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); if (!radio) return -ENODEV; @@ -494,7 +504,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf, radio->curfreq = FREQ_MIN*FREQ_MUL; video_set_drvdata(radio->videodev, radio); if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) { - warn("Could not register video device"); + dev_warn(&intf->dev, "Could not register video device\n"); video_device_release(radio->videodev); kfree(radio->transfer_buffer); kfree(radio); @@ -507,7 +517,8 @@ static int usb_dsbr100_probe(struct usb_interface *intf, static int __init dsbr100_init(void) { int retval = usb_register(&usb_dsbr100_driver); - info(DRIVER_VERSION ":" DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return retval; } diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 1f064f4b32d..9305e958fc6 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -51,6 +51,7 @@ static struct mutex lock; struct rt_device { + unsigned long in_use; int port; int curvol; unsigned long curfreq; @@ -245,8 +246,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -273,8 +273,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); rt->curfreq = f->frequency; rt_setfreq(rt, rt->curfreq); @@ -284,8 +283,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = rt->curfreq; @@ -310,8 +308,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -327,8 +324,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -378,10 +374,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct rt_device rtrack_unit; +static int rtrack_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &rtrack_unit.in_use) ? -EBUSY : 0; +} + +static int rtrack_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &rtrack_unit.in_use); + return 0; +} + static const struct file_operations rtrack_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = rtrack_exclusive_open, + .release = rtrack_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -408,6 +415,7 @@ static struct video_device rtrack_radio = { .name = "RadioTrack radio", .fops = &rtrack_fops, .ioctl_ops = &rtrack_ioctl_ops, + .release = video_device_release_empty, }; static int __init rtrack_init(void) @@ -424,7 +432,7 @@ static int __init rtrack_init(void) return -EBUSY; } - rtrack_radio.priv=&rtrack_unit; + video_set_drvdata(&rtrack_radio, &rtrack_unit); if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index 628c689e3ff..d7848957323 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -70,6 +70,7 @@ static struct mutex lock; struct az_device { + unsigned long in_use; int curvol; unsigned long curfreq; int stereo; @@ -195,8 +196,7 @@ static int vidioc_querycap (struct file *file, void *priv, static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -264,8 +264,7 @@ static int vidioc_s_audio (struct file *file, void *priv, static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_drvdata(file); az->curfreq = f->frequency; az_setfreq(az, az->curfreq); @@ -275,8 +274,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = az->curfreq; @@ -302,8 +300,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -322,8 +319,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -342,10 +338,21 @@ static int vidioc_s_ctrl (struct file *file, void *priv, static struct az_device aztech_unit; +static int aztech_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &aztech_unit.in_use) ? -EBUSY : 0; +} + +static int aztech_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &aztech_unit.in_use); + return 0; +} + static const struct file_operations aztech_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = aztech_exclusive_open, + .release = aztech_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -369,9 +376,10 @@ static const struct v4l2_ioctl_ops aztech_ioctl_ops = { }; static struct video_device aztech_radio = { - .name = "Aztech radio", - .fops = &aztech_fops, - .ioctl_ops = &aztech_ioctl_ops, + .name = "Aztech radio", + .fops = &aztech_fops, + .ioctl_ops = &aztech_ioctl_ops, + .release = video_device_release_empty, }; module_param_named(debug,aztech_radio.debug, int, 0644); @@ -392,7 +400,7 @@ static int __init aztech_init(void) } mutex_init(&lock); - aztech_radio.priv=&aztech_unit; + video_set_drvdata(&aztech_radio, &aztech_unit); if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io,2); diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index 04c3698d32e..0490a1fa999 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -589,6 +589,7 @@ static struct video_device cadet_radio = { .name = "Cadet radio", .fops = &cadet_fops, .ioctl_ops = &cadet_ioctl_ops, + .release = video_device_release_empty, }; #ifdef CONFIG_PNP diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index 5cd7f032298..e15bee6d7cf 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -100,9 +100,8 @@ struct gemtek_pci_card { u8 mute; }; -static const char rcsid[] = "$Id: radio-gemtek-pci.c,v 1.1 2001/07/23 08:08:16 ted Exp ted $"; - static int nr_radio = -1; +static unsigned long in_use; static inline u8 gemtek_pci_out( u16 value, u32 port ) { @@ -205,8 +204,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -233,8 +231,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_drvdata(file); if ( (f->frequency < GEMTEK_PCI_RANGE_LOW) || (f->frequency > GEMTEK_PCI_RANGE_HIGH) ) @@ -248,8 +245,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = card->current_frequency; @@ -273,8 +269,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -293,8 +288,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -364,10 +358,21 @@ MODULE_DEVICE_TABLE( pci, gemtek_pci_id ); static int mx = 1; +static int gemtek_pci_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int gemtek_pci_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations gemtek_pci_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = gemtek_pci_exclusive_open, + .release = gemtek_pci_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -391,9 +396,10 @@ static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = { }; static struct video_device vdev_template = { - .name = "Gemtek PCI Radio", - .fops = &gemtek_pci_fops, - .ioctl_ops = &gemtek_pci_ioctl_ops, + .name = "Gemtek PCI Radio", + .fops = &gemtek_pci_fops, + .ioctl_ops = &gemtek_pci_ioctl_ops, + .release = video_device_release_empty, }; static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci_device_id *pci_id ) @@ -431,7 +437,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci } card->videodev = devradio; - devradio->priv = card; + video_set_drvdata(devradio, card); gemtek_pci_mute( card ); printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n", diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 0a0f956bb30..d131a5d3812 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -57,6 +57,7 @@ static int shutdown = 1; static int keepmuted = 1; static int initmute = 1; static int radio_nr = -1; +static unsigned long in_use; module_param(io, int, 0444); MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic " @@ -393,10 +394,21 @@ static struct v4l2_queryctrl radio_qctrl[] = { } }; +static int gemtek_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int gemtek_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations gemtek_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = gemtek_exclusive_open, + .release = gemtek_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -447,8 +459,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_drvdata(file); gemtek_setfreq(rt, f->frequency); @@ -458,8 +469,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = rt->lastfreq; @@ -483,8 +493,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -503,8 +512,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -569,9 +577,10 @@ static const struct v4l2_ioctl_ops gemtek_ioctl_ops = { }; static struct video_device gemtek_radio = { - .name = "GemTek Radio card", - .fops = &gemtek_fops, - .ioctl_ops = &gemtek_ioctl_ops, + .name = "GemTek Radio card", + .fops = &gemtek_fops, + .ioctl_ops = &gemtek_ioctl_ops, + .release = video_device_release_empty, }; /* @@ -610,7 +619,7 @@ static int __init gemtek_init(void) return -EINVAL; } - gemtek_radio.priv = &gemtek_unit; + video_set_drvdata(&gemtek_radio, &gemtek_unit); if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 1); diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 9ef0a763eeb..4bf4d007bcf 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -75,7 +75,21 @@ static struct v4l2_queryctrl radio_qctrl[] = { static int radio_nr = -1; module_param(radio_nr, int, 0); +static unsigned long in_use; + static int maestro_probe(struct pci_dev *pdev, const struct pci_device_id *ent); + +static int maestro_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int maestro_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static void maestro_remove(struct pci_dev *pdev); static struct pci_device_id maestro_r_pci_tbl[] = { @@ -98,8 +112,8 @@ static struct pci_driver maestro_r_driver = { static const struct file_operations maestro_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = maestro_exclusive_open, + .release = maestro_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -196,8 +210,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -229,8 +242,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) return -EINVAL; @@ -241,8 +253,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = BITS2FREQ(radio_bits_get(card)); @@ -267,8 +278,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -281,8 +291,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); register u16 io = card->io; register u16 omask = inw(io + IO_MASK); @@ -374,6 +383,7 @@ static struct video_device maestro_radio = { .name = "Maestro radio", .fops = &maestro_fops, .ioctl_ops = &maestro_ioctl_ops, + .release = video_device_release, }; static int __devinit maestro_probe(struct pci_dev *pdev, diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 0cc6fcb041f..c777a17b00b 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -85,6 +85,7 @@ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16 ; static int radio_nr = -1; module_param(radio_nr, int, 0); +static unsigned long in_use; #define FREQ_LO 50*16000 #define FREQ_HI 150*16000 @@ -99,10 +100,21 @@ module_param(radio_nr, int, 0); #define BITS2FREQ(x) ((x) * FREQ_STEP - FREQ_IF) +static int maxiradio_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int maxiradio_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations maxiradio_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = maxiradio_exclusive_open, + .release = maxiradio_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -219,8 +231,7 @@ static int vidioc_querycap (struct file *file, void *priv, static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -290,8 +301,7 @@ static int vidioc_s_audio (struct file *file, void *priv, static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_drvdata(file); if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) { dprintk(1, "radio freq (%d.%02d MHz) out of range (%d-%d)\n", @@ -312,8 +322,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = card->freq; @@ -343,8 +352,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -358,8 +366,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -390,9 +397,10 @@ static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = { }; static struct video_device maxiradio_radio = { - .name = "Maxi Radio FM2000 radio", - .fops = &maxiradio_fops, - .ioctl_ops = &maxiradio_ioctl_ops, + .name = "Maxi Radio FM2000 radio", + .fops = &maxiradio_fops, + .ioctl_ops = &maxiradio_ioctl_ops, + .release = video_device_release_empty, }; static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -408,7 +416,7 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d radio_unit.io = pci_resource_start(pdev, 0); mutex_init(&radio_unit.lock); - maxiradio_radio.priv = &radio_unit; + video_set_drvdata(&maxiradio_radio, &radio_unit); if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) { printk("radio-maxiradio: can't register device!"); diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c new file mode 100644 index 00000000000..a33717c4800 --- /dev/null +++ b/drivers/media/radio/radio-mr800.c @@ -0,0 +1,628 @@ +/* + * A driver for the AverMedia MR 800 USB FM radio. This device plugs + * into both the USB and an analog audio input, so this thing + * only deals with initialization and frequency setting, the + * audio data has to be handled by a sound driver. + * + * Copyright (c) 2008 Alexey Klimov <klimov.linux@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Big thanks to authors of dsbr100.c and radio-si470x.c + * + * When work was looked pretty good, i discover this: + * http://av-usbradio.sourceforge.net/index.php + * http://sourceforge.net/projects/av-usbradio/ + * Latest release of theirs project was in 2005. + * Probably, this driver could be improved trough using their + * achievements (specifications given). + * So, we have smth to begin with. + * + * History: + * Version 0.01: First working version. + * It's required to blacklist AverMedia USB Radio + * in usbhid/hid-quirks.c + * + * Many things to do: + * - Correct power managment of device (suspend & resume) + * - Make x86 independance (little-endian and big-endian stuff) + * - Add code for scanning and smooth tuning + * - Checked and add stereo&mono stuff + * - Add code for sensitivity value + * - Correct mistakes + * - In Japan another FREQ_MIN and FREQ_MAX + */ + +/* kernel includes */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <linux/usb.h> +#include <linux/version.h> /* for KERNEL_VERSION MACRO */ + +/* driver and module definitions */ +#define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>" +#define DRIVER_DESC "AverMedia MR 800 USB FM radio driver" +#define DRIVER_VERSION "0.01" +#define RADIO_VERSION KERNEL_VERSION(0, 0, 1) + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define USB_AMRADIO_VENDOR 0x07ca +#define USB_AMRADIO_PRODUCT 0xb800 + +/* Probably USB_TIMEOUT should be modified in module parameter */ +#define BUFFER_LENGTH 8 +#define USB_TIMEOUT 500 + +/* Frequency limits in MHz -- these are European values. For Japanese +devices, that would be 76 and 91. */ +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + +/* module parameter */ +static int radio_nr = -1; +module_param(radio_nr, int, 0); +MODULE_PARM_DESC(radio_nr, "Radio Nr"); + +static struct v4l2_queryctrl radio_qctrl[] = { + { + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, +/* HINT: the disabled controls are only here to satify kradio and such apps */ + { .id = V4L2_CID_AUDIO_VOLUME, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_BALANCE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_BASS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_TREBLE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_LOUDNESS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, +}; + +static int usb_amradio_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void usb_amradio_disconnect(struct usb_interface *intf); +static int usb_amradio_open(struct inode *inode, struct file *file); +static int usb_amradio_close(struct inode *inode, struct file *file); +static int usb_amradio_suspend(struct usb_interface *intf, + pm_message_t message); +static int usb_amradio_resume(struct usb_interface *intf); + +/* Data for one (physical) device */ +struct amradio_device { + /* reference to USB and video device */ + struct usb_device *usbdev; + struct video_device *videodev; + + unsigned char *buffer; + struct mutex lock; /* buffer locking */ + int curfreq; + int stereo; + int users; + int removed; + int muted; +}; + +/* USB Device ID List */ +static struct usb_device_id usb_amradio_device_table[] = { + {USB_DEVICE_AND_INTERFACE_INFO(USB_AMRADIO_VENDOR, USB_AMRADIO_PRODUCT, + USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_amradio_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_amradio_driver = { + .name = "radio-mr800", + .probe = usb_amradio_probe, + .disconnect = usb_amradio_disconnect, + .suspend = usb_amradio_suspend, + .resume = usb_amradio_resume, + .reset_resume = usb_amradio_resume, + .id_table = usb_amradio_device_table, + .supports_autosuspend = 1, +}; + +/* switch on radio. Send 8 bytes to device. */ +static int amradio_start(struct amradio_device *radio) +{ + int retval; + int size; + + mutex_lock(&radio->lock); + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x55; + radio->buffer[2] = 0xaa; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0xab; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + mutex_unlock(&radio->lock); + + radio->muted = 0; + + return retval; +} + +/* switch off radio */ +static int amradio_stop(struct amradio_device *radio) +{ + int retval; + int size; + + mutex_lock(&radio->lock); + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x55; + radio->buffer[2] = 0xaa; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0xab; + radio->buffer[5] = 0x01; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + mutex_unlock(&radio->lock); + + radio->muted = 1; + + return retval; +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int amradio_setfreq(struct amradio_device *radio, int freq) +{ + int retval; + int size; + unsigned short freq_send = 0x13 + (freq >> 3) / 25; + + mutex_lock(&radio->lock); + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x55; + radio->buffer[2] = 0xaa; + radio->buffer[3] = 0x03; + radio->buffer[4] = 0xa4; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x08; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + /* frequency is calculated from freq_send and placed in first 2 bytes */ + radio->buffer[0] = (freq_send >> 8) & 0xff; + radio->buffer[1] = freq_send & 0xff; + radio->buffer[2] = 0x01; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0x00; + /* 5 and 6 bytes of buffer already = 0x00 */ + radio->buffer[7] = 0x00; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + mutex_unlock(&radio->lock); + + radio->stereo = 0; + + return retval; +} + +/* USB subsystem interface begins here */ + +/* handle unplugging of the device, release data structures +if nothing keeps us from doing it. If something is still +keeping us busy, the release callback of v4l will take care +of releasing it. */ +static void usb_amradio_disconnect(struct usb_interface *intf) +{ + struct amradio_device *radio = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (radio) { + video_unregister_device(radio->videodev); + radio->videodev = NULL; + if (radio->users) { + kfree(radio->buffer); + kfree(radio); + } else { + radio->removed = 1; + } + } +} + +/* vidioc_querycap - query device capabilities */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + strlcpy(v->driver, "radio-mr800", sizeof(v->driver)); + strlcpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card)); + sprintf(v->bus_info, "USB"); + v->version = RADIO_VERSION; + v->capabilities = V4L2_CAP_TUNER; + return 0; +} + +/* vidioc_g_tuner - get tuner attributes */ +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + if (v->index > 0) + return -EINVAL; + +/* TODO: Add function which look is signal stereo or not + * amradio_getstat(radio); + */ + radio->stereo = -1; + strcpy(v->name, "FM"); + v->type = V4L2_TUNER_RADIO; + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + v->capability = V4L2_TUNER_CAP_LOW; + if (radio->stereo) + v->audmode = V4L2_TUNER_MODE_STEREO; + else + v->audmode = V4L2_TUNER_MODE_MONO; + v->signal = 0xffff; /* Can't get the signal strength, sad.. */ + v->afc = 0; /* Don't know what is this */ + return 0; +} + +/* vidioc_s_tuner - set tuner attributes */ +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + if (v->index > 0) + return -EINVAL; + return 0; +} + +/* vidioc_s_frequency - set tuner radio frequency */ +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + radio->curfreq = f->frequency; + if (amradio_setfreq(radio, radio->curfreq) < 0) + warn("Set frequency failed"); + return 0; +} + +/* vidioc_g_frequency - get tuner radio frequency */ +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + f->type = V4L2_TUNER_RADIO; + f->frequency = radio->curfreq; + return 0; +} + +/* vidioc_queryctrl - enumerate control items */ +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { + if (qc->id && qc->id == radio_qctrl[i].id) { + memcpy(qc, &(radio_qctrl[i]), + sizeof(*qc)); + return 0; + } + } + return -EINVAL; +} + +/* vidioc_g_ctrl - get the value of a control */ +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + ctrl->value = radio->muted; + return 0; + } + return -EINVAL; +} + +/* vidioc_s_ctrl - set the value of a control */ +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value) { + if (amradio_stop(radio) < 0) { + warn("amradio_stop() failed"); + return -1; + } + } else { + if (amradio_start(radio) < 0) { + warn("amradio_start() failed"); + return -1; + } + } + return 0; + } + return -EINVAL; +} + +/* vidioc_g_audio - get audio attributes */ +static int vidioc_g_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + if (a->index > 1) + return -EINVAL; + + strcpy(a->name, "Radio"); + a->capability = V4L2_AUDCAP_STEREO; + return 0; +} + +/* vidioc_s_audio - set audio attributes */ +static int vidioc_s_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + if (a->index != 0) + return -EINVAL; + return 0; +} + +/* vidioc_g_input - get input */ +static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +/* vidioc_s_input - set input */ +static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + return 0; +} + +/* open device - amradio_start() and amradio_setfreq() */ +static int usb_amradio_open(struct inode *inode, struct file *file) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + radio->users = 1; + radio->muted = 1; + + if (amradio_start(radio) < 0) { + warn("Radio did not start up properly"); + radio->users = 0; + return -EIO; + } + if (amradio_setfreq(radio, radio->curfreq) < 0) + warn("Set frequency failed"); + return 0; +} + +/*close device - free driver structures */ +static int usb_amradio_close(struct inode *inode, struct file *file) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + radio->users = 0; + if (radio->removed) { + kfree(radio->buffer); + kfree(radio); + } + return 0; +} + +/* Suspend device - stop device. Need to be checked and fixed */ +static int usb_amradio_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct amradio_device *radio = usb_get_intfdata(intf); + + if (amradio_stop(radio) < 0) + warn("amradio_stop() failed"); + + info("radio-mr800: Going into suspend.."); + + return 0; +} + +/* Resume device - start device. Need to be checked and fixed */ +static int usb_amradio_resume(struct usb_interface *intf) +{ + struct amradio_device *radio = usb_get_intfdata(intf); + + if (amradio_start(radio) < 0) + warn("amradio_start() failed"); + + info("radio-mr800: Coming out of suspend.."); + + return 0; +} + +/* File system interface */ +static const struct file_operations usb_amradio_fops = { + .owner = THIS_MODULE, + .open = usb_amradio_open, + .release = usb_amradio_close, + .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT + .compat_ioctl = v4l_compat_ioctl32, +#endif + .llseek = no_llseek, +}; + +static const struct v4l2_ioctl_ops usb_amradio_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, +}; + +/* V4L2 interface */ +static struct video_device amradio_videodev_template = { + .name = "AverMedia MR 800 USB FM Radio", + .fops = &usb_amradio_fops, + .ioctl_ops = &usb_amradio_ioctl_ops, + .release = video_device_release, +}; + +/* check if the device is present and register with v4l and +usb if it is */ +static int usb_amradio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct amradio_device *radio; + + radio = kmalloc(sizeof(struct amradio_device), GFP_KERNEL); + + if (!(radio)) + return -ENOMEM; + + radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL); + + if (!(radio->buffer)) { + kfree(radio); + return -ENOMEM; + } + + radio->videodev = video_device_alloc(); + + if (!(radio->videodev)) { + kfree(radio->buffer); + kfree(radio); + return -ENOMEM; + } + + memcpy(radio->videodev, &amradio_videodev_template, + sizeof(amradio_videodev_template)); + + radio->removed = 0; + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + radio->curfreq = 95.16 * FREQ_MUL; + + mutex_init(&radio->lock); + + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) { + warn("Could not register video device"); + video_device_release(radio->videodev); + kfree(radio->buffer); + kfree(radio); + return -EIO; + } + + usb_set_intfdata(intf, radio); + return 0; +} + +static int __init amradio_init(void) +{ + int retval = usb_register(&usb_amradio_driver); + + info(DRIVER_VERSION " " DRIVER_DESC); + if (retval) + err("usb_register failed. Error number %d", retval); + return retval; +} + +static void __exit amradio_exit(void) +{ + usb_deregister(&usb_amradio_driver); +} + +module_init(amradio_init); +module_exit(amradio_exit); + diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 6d820e2481e..a6707977741 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -52,6 +52,7 @@ static spinlock_t lock; struct rt_device { + unsigned long in_use; int port; unsigned long curfreq; int muted; @@ -153,8 +154,7 @@ static int rt_getsigstr(struct rt_device *dev) static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -173,8 +173,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); rt->curfreq = f->frequency; rt_setfreq(rt, rt->curfreq); @@ -184,8 +183,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = rt->curfreq; @@ -210,8 +208,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -230,8 +227,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -284,10 +280,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct rt_device rtrack2_unit; +static int rtrack2_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &rtrack2_unit.in_use) ? -EBUSY : 0; +} + +static int rtrack2_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &rtrack2_unit.in_use); + return 0; +} + static const struct file_operations rtrack2_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = rtrack2_exclusive_open, + .release = rtrack2_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -314,6 +321,7 @@ static struct video_device rtrack2_radio = { .name = "RadioTrack II radio", .fops = &rtrack2_fops, .ioctl_ops = &rtrack2_ioctl_ops, + .release = video_device_release_empty, }; static int __init rtrack2_init(void) @@ -329,7 +337,7 @@ static int __init rtrack2_init(void) return -EBUSY; } - rtrack2_radio.priv=&rtrack2_unit; + video_set_drvdata(&rtrack2_radio, &rtrack2_unit); spin_lock_init(&lock); if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) { diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 0d478f54a90..329c90bddad 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -45,6 +45,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { struct fmi_device { + unsigned long in_use; int port; int curvol; /* 1 or 0 */ unsigned long curfreq; /* freq in kHz */ @@ -146,8 +147,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { int mult; - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -175,8 +175,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_drvdata(file); if (!(fmi->flags & V4L2_TUNER_CAP_LOW)) f->frequency *= 1000; @@ -193,8 +192,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = fmi->curfreq; @@ -221,8 +219,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -235,8 +232,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -284,10 +280,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct fmi_device fmi_unit; +static int fmi_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &fmi_unit.in_use) ? -EBUSY : 0; +} + +static int fmi_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &fmi_unit.in_use); + return 0; +} + static const struct file_operations fmi_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = fmi_exclusive_open, + .release = fmi_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -314,6 +321,7 @@ static struct video_device fmi_radio = { .name = "SF16FMx radio", .fops = &fmi_fops, .ioctl_ops = &fmi_ioctl_ops, + .release = video_device_release_empty, }; /* ladis: this is my card. does any other types exist? */ @@ -373,7 +381,7 @@ static int __init fmi_init(void) fmi_unit.curvol = 0; fmi_unit.curfreq = 0; fmi_unit.flags = V4L2_TUNER_CAP_LOW; - fmi_radio.priv = &fmi_unit; + video_set_drvdata(&fmi_radio, &fmi_unit); mutex_init(&lock); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 6290553d24b..b1f47c322e0 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -64,6 +64,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { /* this should be static vars for module size */ struct fmr2_device { + unsigned long in_use; int port; int curvol; /* 0-15 */ int mute; @@ -229,8 +230,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { int mult; - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -262,8 +262,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_drvdata(file); if (!(fmr2->flags & V4L2_TUNER_CAP_LOW)) f->frequency *= 1000; @@ -286,8 +285,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = fmr2->curfreq; @@ -313,8 +311,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -330,8 +327,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -400,10 +396,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct fmr2_device fmr2_unit; +static int fmr2_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &fmr2_unit.in_use) ? -EBUSY : 0; +} + +static int fmr2_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &fmr2_unit.in_use); + return 0; +} + static const struct file_operations fmr2_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = fmr2_exclusive_open, + .release = fmr2_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -430,6 +437,7 @@ static struct video_device fmr2_radio = { .name = "SF16FMR2 radio", .fops = &fmr2_fops, .ioctl_ops = &fmr2_ioctl_ops, + .release = video_device_release_empty, }; static int __init fmr2_init(void) @@ -441,7 +449,7 @@ static int __init fmr2_init(void) fmr2_unit.stereo = 1; fmr2_unit.flags = V4L2_TUNER_CAP_LOW; fmr2_unit.card_type = 0; - fmr2_radio.priv = &fmr2_unit; + video_set_drvdata(&fmr2_radio, &fmr2_unit); mutex_init(&lock); diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 16c7ef20265..5920cd30697 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -104,6 +104,7 @@ * - hardware frequency seek support * - afc indication * - more safety checks, let si470x_get_freq return errno + * - vidioc behavior corrected according to v4l2 spec * * ToDo: * - add firmware download/update support @@ -141,9 +142,9 @@ /* USB Device ID List */ static struct usb_device_id si470x_usb_driver_id_table[] = { /* Silicon Labs USB FM Radio Reference Design */ - { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ - { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; @@ -157,7 +158,7 @@ MODULE_DEVICE_TABLE(usb, si470x_usb_driver_id_table); /* Radio Nr */ static int radio_nr = -1; -module_param(radio_nr, int, 0); +module_param(radio_nr, int, 0444); MODULE_PARM_DESC(radio_nr, "Radio Nr"); /* Spacing (kHz) */ @@ -165,42 +166,42 @@ MODULE_PARM_DESC(radio_nr, "Radio Nr"); /* 1: 100 kHz (Europe, Japan) */ /* 2: 50 kHz */ static unsigned short space = 2; -module_param(space, ushort, 0); -MODULE_PARM_DESC(radio_nr, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); +module_param(space, ushort, 0444); +MODULE_PARM_DESC(space, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); /* Bottom of Band (MHz) */ /* 0: 87.5 - 108 MHz (USA, Europe)*/ /* 1: 76 - 108 MHz (Japan wide band) */ /* 2: 76 - 90 MHz (Japan) */ static unsigned short band = 1; -module_param(band, ushort, 0); -MODULE_PARM_DESC(radio_nr, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); +module_param(band, ushort, 0444); +MODULE_PARM_DESC(band, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); /* De-emphasis */ /* 0: 75 us (USA) */ /* 1: 50 us (Europe, Australia, Japan) */ static unsigned short de = 1; -module_param(de, ushort, 0); -MODULE_PARM_DESC(radio_nr, "De-emphasis: 0=75us *1=50us*"); +module_param(de, ushort, 0444); +MODULE_PARM_DESC(de, "De-emphasis: 0=75us *1=50us*"); /* USB timeout */ static unsigned int usb_timeout = 500; -module_param(usb_timeout, uint, 0); +module_param(usb_timeout, uint, 0644); MODULE_PARM_DESC(usb_timeout, "USB timeout (ms): *500*"); /* Tune timeout */ static unsigned int tune_timeout = 3000; -module_param(tune_timeout, uint, 0); +module_param(tune_timeout, uint, 0644); MODULE_PARM_DESC(tune_timeout, "Tune timeout: *3000*"); /* Seek timeout */ static unsigned int seek_timeout = 5000; -module_param(seek_timeout, uint, 0); +module_param(seek_timeout, uint, 0644); MODULE_PARM_DESC(seek_timeout, "Seek timeout: *5000*"); /* RDS buffer blocks */ static unsigned int rds_buf = 100; -module_param(rds_buf, uint, 0); +module_param(rds_buf, uint, 0444); MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*"); /* RDS maximum block errors */ @@ -209,7 +210,7 @@ static unsigned short max_rds_errors = 1; /* 1 means 1-2 errors requiring correction (used by original USBRadio.exe) */ /* 2 means 3-5 errors requiring correction */ /* 3 means 6+ errors or errors in checkword, correction not possible */ -module_param(max_rds_errors, ushort, 0); +module_param(max_rds_errors, ushort, 0644); MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); /* RDS poll frequency */ @@ -218,7 +219,7 @@ static unsigned int rds_poll_time = 40; /* 50 is used by radio-cadet */ /* 75 should be okay */ /* 80 is the usual RDS receive interval */ -module_param(rds_poll_time, uint, 0); +module_param(rds_poll_time, uint, 0644); MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); @@ -667,23 +668,29 @@ static int si470x_get_freq(struct si470x_device *radio, unsigned int *freq) int retval; /* Spacing (kHz) */ - switch (space) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { /* 0: 200 kHz (USA, Australia) */ - case 0 : spacing = 0.200 * FREQ_MUL; break; + case 0: + spacing = 0.200 * FREQ_MUL; break; /* 1: 100 kHz (Europe, Japan) */ - case 1 : spacing = 0.100 * FREQ_MUL; break; + case 1: + spacing = 0.100 * FREQ_MUL; break; /* 2: 50 kHz */ - default: spacing = 0.050 * FREQ_MUL; break; + default: + spacing = 0.050 * FREQ_MUL; break; }; /* Bottom of Band (MHz) */ - switch (band) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { /* 0: 87.5 - 108 MHz (USA, Europe) */ - case 0 : band_bottom = 87.5 * FREQ_MUL; break; + case 0: + band_bottom = 87.5 * FREQ_MUL; break; /* 1: 76 - 108 MHz (Japan wide band) */ - default: band_bottom = 76 * FREQ_MUL; break; + default: + band_bottom = 76 * FREQ_MUL; break; /* 2: 76 - 90 MHz (Japan) */ - case 2 : band_bottom = 76 * FREQ_MUL; break; + case 2: + band_bottom = 76 * FREQ_MUL; break; }; /* read channel */ @@ -706,23 +713,29 @@ static int si470x_set_freq(struct si470x_device *radio, unsigned int freq) unsigned short chan; /* Spacing (kHz) */ - switch (space) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { /* 0: 200 kHz (USA, Australia) */ - case 0 : spacing = 0.200 * FREQ_MUL; break; + case 0: + spacing = 0.200 * FREQ_MUL; break; /* 1: 100 kHz (Europe, Japan) */ - case 1 : spacing = 0.100 * FREQ_MUL; break; + case 1: + spacing = 0.100 * FREQ_MUL; break; /* 2: 50 kHz */ - default: spacing = 0.050 * FREQ_MUL; break; + default: + spacing = 0.050 * FREQ_MUL; break; }; /* Bottom of Band (MHz) */ - switch (band) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { /* 0: 87.5 - 108 MHz (USA, Europe) */ - case 0 : band_bottom = 87.5 * FREQ_MUL; break; + case 0: + band_bottom = 87.5 * FREQ_MUL; break; /* 1: 76 - 108 MHz (Japan wide band) */ - default: band_bottom = 76 * FREQ_MUL; break; + default: + band_bottom = 76 * FREQ_MUL; break; /* 2: 76 - 90 MHz (Japan) */ - case 2 : band_bottom = 76 * FREQ_MUL; break; + case 2: + band_bottom = 76 * FREQ_MUL; break; }; /* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */ @@ -986,7 +999,7 @@ static void si470x_work(struct work_struct *work) static ssize_t si470x_fops_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; unsigned int block_count = 0; @@ -1047,7 +1060,7 @@ done: static unsigned int si470x_fops_poll(struct file *file, struct poll_table_struct *pts) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* switch on rds reception */ @@ -1071,9 +1084,10 @@ static unsigned int si470x_fops_poll(struct file *file, */ static int si470x_fops_open(struct inode *inode, struct file *file) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval; + lock_kernel(); radio->users++; retval = usb_autopm_get_interface(radio->intf); @@ -1090,6 +1104,7 @@ static int si470x_fops_open(struct inode *inode, struct file *file) } done: + unlock_kernel(); return retval; } @@ -1099,7 +1114,7 @@ done: */ static int si470x_fops_release(struct inode *inode, struct file *file) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety check */ @@ -1162,7 +1177,6 @@ static const struct file_operations si470x_fops = { * si470x_v4l2_queryctrl - query control */ static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { -/* HINT: the disabled controls are only here to satify kradio and such apps */ { .id = V4L2_CID_AUDIO_VOLUME, .type = V4L2_CTRL_TYPE_INTEGER, @@ -1173,18 +1187,6 @@ static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { .default_value = 15, }, { - .id = V4L2_CID_AUDIO_BALANCE, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_BASS, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_TREBLE, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { .id = V4L2_CID_AUDIO_MUTE, .type = V4L2_CTRL_TYPE_BOOLEAN, .name = "Mute", @@ -1193,10 +1195,6 @@ static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { .step = 1, .default_value = 1, }, - { - .id = V4L2_CID_AUDIO_LOUDNESS, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, }; @@ -1218,56 +1216,34 @@ static int si470x_vidioc_querycap(struct file *file, void *priv, /* - * si470x_vidioc_g_input - get input - */ -static int si470x_vidioc_g_input(struct file *file, void *priv, - unsigned int *i) -{ - *i = 0; - - return 0; -} - - -/* - * si470x_vidioc_s_input - set input - */ -static int si470x_vidioc_s_input(struct file *file, void *priv, unsigned int i) -{ - int retval = 0; - - /* safety checks */ - if (i != 0) - retval = -EINVAL; - - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": set input failed with %d\n", retval); - return retval; -} - - -/* * si470x_vidioc_queryctrl - enumerate control items */ static int si470x_vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { - unsigned char i; + unsigned char i = 0; int retval = -EINVAL; - /* safety checks */ - if (!qc->id) + /* abort if qc->id is below V4L2_CID_BASE */ + if (qc->id < V4L2_CID_BASE) goto done; + /* search video control */ for (i = 0; i < ARRAY_SIZE(si470x_v4l2_queryctrl); i++) { if (qc->id == si470x_v4l2_queryctrl[i].id) { memcpy(qc, &(si470x_v4l2_queryctrl[i]), sizeof(*qc)); - retval = 0; + retval = 0; /* found */ break; } } + /* disable unsupported base controls */ + /* to satisfy kradio and such apps */ + if ((retval == -EINVAL) && (qc->id < V4L2_CID_LASTP1)) { + qc->flags = V4L2_CTRL_FLAG_DISABLED; + retval = 0; + } + done: if (retval < 0) printk(KERN_WARNING DRIVER_NAME @@ -1282,7 +1258,7 @@ done: static int si470x_vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1318,7 +1294,7 @@ done: static int si470x_vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1358,44 +1334,13 @@ done: static int si470x_vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *audio) { - int retval = 0; - - /* safety checks */ - if (audio->index != 0) { - retval = -EINVAL; - goto done; - } - + /* driver constants */ + audio->index = 0; strcpy(audio->name, "Radio"); audio->capability = V4L2_AUDCAP_STEREO; + audio->mode = 0; -done: - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": get audio failed with %d\n", retval); - return retval; -} - - -/* - * si470x_vidioc_s_audio - set audio attributes - */ -static int si470x_vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *audio) -{ - int retval = 0; - - /* safety checks */ - if (audio->index != 0) { - retval = -EINVAL; - goto done; - } - -done: - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": set audio failed with %d\n", retval); - return retval; + return 0; } @@ -1405,7 +1350,7 @@ done: static int si470x_vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *tuner) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1413,7 +1358,7 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, retval = -EIO; goto done; } - if ((tuner->index != 0) && (tuner->type != V4L2_TUNER_RADIO)) { + if (tuner->index != 0) { retval = -EINVAL; goto done; } @@ -1422,8 +1367,13 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, if (retval < 0) goto done; + /* driver constants */ strcpy(tuner->name, "FM"); - switch (band) { + tuner->type = V4L2_TUNER_RADIO; + tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + + /* range limits */ + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { /* 0: 87.5 - 108 MHz (USA, Europe, default) */ default: tuner->rangelow = 87.5 * FREQ_MUL; @@ -1440,14 +1390,18 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, tuner->rangehigh = 90 * FREQ_MUL; break; }; - tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - tuner->capability = V4L2_TUNER_CAP_LOW; - /* Stereo indicator == Stereo (instead of Mono) */ + /* stereo indicator == stereo (instead of mono) */ if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1) - tuner->audmode = V4L2_TUNER_MODE_STEREO; + tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; else + tuner->rxsubchans = V4L2_TUNER_SUB_MONO; + + /* mono/stereo selector */ + if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1) tuner->audmode = V4L2_TUNER_MODE_MONO; + else + tuner->audmode = V4L2_TUNER_MODE_STEREO; /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI) @@ -1471,23 +1425,28 @@ done: static int si470x_vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *tuner) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); - int retval = 0; + struct si470x_device *radio = video_drvdata(file); + int retval = -EINVAL; /* safety checks */ if (radio->disconnected) { retval = -EIO; goto done; } - if ((tuner->index != 0) && (tuner->type != V4L2_TUNER_RADIO)) { - retval = -EINVAL; + if (tuner->index != 0) goto done; - } - if (tuner->audmode == V4L2_TUNER_MODE_MONO) + /* mono/stereo selector */ + switch (tuner->audmode) { + case V4L2_TUNER_MODE_MONO: radio->registers[POWERCFG] |= POWERCFG_MONO; /* force mono */ - else + break; + case V4L2_TUNER_MODE_STEREO: radio->registers[POWERCFG] &= ~POWERCFG_MONO; /* try stereo */ + break; + default: + goto done; + } retval = si470x_set_register(radio, POWERCFG); @@ -1505,7 +1464,7 @@ done: static int si470x_vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *freq) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1513,11 +1472,12 @@ static int si470x_vidioc_g_frequency(struct file *file, void *priv, retval = -EIO; goto done; } - if ((freq->tuner != 0) && (freq->type != V4L2_TUNER_RADIO)) { + if (freq->tuner != 0) { retval = -EINVAL; goto done; } + freq->type = V4L2_TUNER_RADIO; retval = si470x_get_freq(radio, &freq->frequency); done: @@ -1534,7 +1494,7 @@ done: static int si470x_vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *freq) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1542,7 +1502,7 @@ static int si470x_vidioc_s_frequency(struct file *file, void *priv, retval = -EIO; goto done; } - if ((freq->tuner != 0) && (freq->type != V4L2_TUNER_RADIO)) { + if (freq->tuner != 0) { retval = -EINVAL; goto done; } @@ -1563,7 +1523,7 @@ done: static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv, struct v4l2_hw_freq_seek *seek) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1571,7 +1531,7 @@ static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv, retval = -EIO; goto done; } - if ((seek->tuner != 0) && (seek->type != V4L2_TUNER_RADIO)) { + if (seek->tuner != 0) { retval = -EINVAL; goto done; } @@ -1586,15 +1546,16 @@ done: return retval; } + +/* + * si470x_ioctl_ops - video device ioctl operations + */ static const struct v4l2_ioctl_ops si470x_ioctl_ops = { .vidioc_querycap = si470x_vidioc_querycap, - .vidioc_g_input = si470x_vidioc_g_input, - .vidioc_s_input = si470x_vidioc_s_input, .vidioc_queryctrl = si470x_vidioc_queryctrl, .vidioc_g_ctrl = si470x_vidioc_g_ctrl, .vidioc_s_ctrl = si470x_vidioc_s_ctrl, .vidioc_g_audio = si470x_vidioc_g_audio, - .vidioc_s_audio = si470x_vidioc_s_audio, .vidioc_g_tuner = si470x_vidioc_g_tuner, .vidioc_s_tuner = si470x_vidioc_s_tuner, .vidioc_g_frequency = si470x_vidioc_g_frequency, @@ -1602,14 +1563,15 @@ static const struct v4l2_ioctl_ops si470x_ioctl_ops = { .vidioc_s_hw_freq_seek = si470x_vidioc_s_hw_freq_seek, }; + /* - * si470x_viddev_tamples - video device interface + * si470x_viddev_template - video device interface */ static struct video_device si470x_viddev_template = { .fops = &si470x_fops, - .ioctl_ops = &si470x_ioctl_ops, .name = DRIVER_NAME, .release = video_device_release, + .ioctl_ops = &si470x_ioctl_ops, }; diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index 0876fecc5f2..0abb186a947 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -79,6 +79,7 @@ static spinlock_t lock; struct tt_device { + unsigned long in_use; int port; int curvol; unsigned long curfreq; @@ -220,8 +221,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -248,8 +248,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_drvdata(file); tt->curfreq = f->frequency; tt_setfreq(tt, tt->curfreq); @@ -259,8 +258,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = tt->curfreq; @@ -285,8 +283,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -305,8 +302,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -356,10 +352,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct tt_device terratec_unit; +static int terratec_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &terratec_unit.in_use) ? -EBUSY : 0; +} + +static int terratec_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &terratec_unit.in_use); + return 0; +} + static const struct file_operations terratec_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = terratec_exclusive_open, + .release = terratec_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -386,6 +393,7 @@ static struct video_device terratec_radio = { .name = "TerraTec ActiveRadio", .fops = &terratec_fops, .ioctl_ops = &terratec_ioctl_ops, + .release = video_device_release_empty, }; static int __init terratec_init(void) @@ -401,7 +409,7 @@ static int __init terratec_init(void) return -EBUSY; } - terratec_radio.priv=&terratec_unit; + video_set_drvdata(&terratec_radio, &terratec_unit); spin_lock_init(&lock); diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index 19316195625..e7b111fcd10 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -78,6 +78,7 @@ static __u16 curtreble; static unsigned long curfreq; static int curstereo; static int curmute; +static unsigned long in_use; /* i2c addresses */ #define TDA7318_ADDR 0x88 @@ -336,10 +337,21 @@ static int vidioc_s_audio(struct file *file, void *priv, return 0; } +static int trust_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int trust_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations trust_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = trust_exclusive_open, + .release = trust_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -366,6 +378,7 @@ static struct video_device trust_radio = { .name = "Trust FM Radio", .fops = &trust_fops, .ioctl_ops = &trust_ioctl_ops, + .release = video_device_release_empty, }; static int __init trust_init(void) diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index f8d62cfea77..952ec35a841 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -79,7 +79,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { #endif struct typhoon_device { - int users; + unsigned long in_use; int iobase; int curvol; int muted; @@ -223,8 +223,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_drvdata(file); typhoon->curfreq = f->frequency; typhoon_setfreq(typhoon, typhoon->curfreq); @@ -234,8 +233,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = typhoon->curfreq; @@ -261,8 +259,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -278,8 +275,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -334,10 +330,21 @@ static struct typhoon_device typhoon_unit = .mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ, }; +static int typhoon_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &typhoon_unit.in_use) ? -EBUSY : 0; +} + +static int typhoon_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &typhoon_unit.in_use); + return 0; +} + static const struct file_operations typhoon_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = typhoon_exclusive_open, + .release = typhoon_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -364,6 +371,7 @@ static struct video_device typhoon_radio = { .name = "Typhoon Radio", .fops = &typhoon_fops, .ioctl_ops = &typhoon_ioctl_ops, + .release = video_device_release_empty, }; #ifdef CONFIG_RADIO_TYPHOON_PROC_FS @@ -446,9 +454,8 @@ static int __init typhoon_init(void) return -EBUSY; } - typhoon_radio.priv = &typhoon_unit; - if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) == -1) - { + video_set_drvdata(&typhoon_radio, &typhoon_unit); + if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 8); return -EINVAL; } diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 51d57ed3b3e..15b10bad679 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -69,6 +69,7 @@ static int io = CONFIG_RADIO_ZOLTRIX_PORT; static int radio_nr = -1; struct zol_device { + unsigned long in_use; int port; int curvol; unsigned long curfreq; @@ -122,8 +123,11 @@ static int zol_setfreq(struct zol_device *dev, unsigned long freq) unsigned int stereo = dev->stereo; int i; - if (freq == 0) - return 1; + if (freq == 0) { + printk(KERN_WARNING "zoltrix: received zero freq. Failed to set.\n"); + return -EINVAL; + } + m = (freq / 160 - 8800) * 2; f = (unsigned long long) m + 0x4d1c; @@ -245,8 +249,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -276,19 +279,20 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_drvdata(file); zol->curfreq = f->frequency; - zol_setfreq(zol, zol->curfreq); + if (zol_setfreq(zol, zol->curfreq) != 0) { + printk(KERN_WARNING "zoltrix: Set frequency failed.\n"); + return -EINVAL; + } return 0; } static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = zol->curfreq; @@ -313,8 +317,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -330,8 +333,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -347,7 +349,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv, return 0; } zol->stereo = 1; - zol_setfreq(zol, zol->curfreq); + if (zol_setfreq(zol, zol->curfreq) != 0) { + printk(KERN_WARNING "zoltrix: Set frequency failed.\n"); + return -EINVAL; + } #if 0 /* FIXME: Implement stereo/mono switch on V4L2 */ if (v->mode & VIDEO_SOUND_STEREO) { @@ -396,11 +401,22 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct zol_device zoltrix_unit; +static int zoltrix_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &zoltrix_unit.in_use) ? -EBUSY : 0; +} + +static int zoltrix_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &zoltrix_unit.in_use); + return 0; +} + static const struct file_operations zoltrix_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = zoltrix_exclusive_open, + .release = zoltrix_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -427,6 +443,7 @@ static struct video_device zoltrix_radio = { .name = "Zoltrix Radio Plus", .fops = &zoltrix_fops, .ioctl_ops = &zoltrix_ioctl_ops, + .release = video_device_release_empty, }; static int __init zoltrix_init(void) @@ -440,7 +457,7 @@ static int __init zoltrix_init(void) return -ENXIO; } - zoltrix_radio.priv = &zoltrix_unit; + video_set_drvdata(&zoltrix_radio, &zoltrix_unit); if (!request_region(io, 2, "zoltrix")) { printk(KERN_ERR "zoltrix: port 0x%x already in use\n", io); return -EBUSY; diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3e9e0dcd217..47102c2c825 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -34,6 +34,7 @@ config VIDEOBUF_DVB select VIDEOBUF_GEN config VIDEO_BTCX + depends on PCI tristate config VIDEO_IR @@ -71,6 +72,15 @@ config VIDEO_ADV_DEBUG V4L devices. In doubt, say N. +config VIDEO_FIXED_MINOR_RANGES + bool "Enable old-style fixed minor ranges for video devices" + default n + ---help--- + Say Y here to enable the old-style fixed-range minor assignments. + Only useful if you rely on the old behavior and use mknod instead of udev. + + When in doubt, say N. + config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" default y @@ -578,13 +588,6 @@ config VIDEO_SAA5249 To compile this driver as a module, choose M here: the module will be called saa5249. -config TUNER_3036 - tristate "SAB3036 tuner" - depends on I2C && VIDEO_V4L1 - help - Say Y here to include support for Philips SAB3036 compatible tuners. - If in doubt, say N. - config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 @@ -602,79 +605,7 @@ config VIDEO_STRADIS driver for PCI. There is a product page at <http://www.stradis.com/>. -config VIDEO_ZORAN - tristate "Zoran ZR36057/36067 Video For Linux" - depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS - help - Say Y for support for MJPEG capture cards based on the Zoran - 36057/36067 PCI controller chipset. This includes the Iomega - Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is - a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For - more information, check <file:Documentation/video4linux/Zoran>. - - To compile this driver as a module, choose M here: the - module will be called zr36067. - -config VIDEO_ZORAN_DC30 - tristate "Pinnacle/Miro DC30(+) support" - depends on VIDEO_ZORAN - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback - card. This also supports really old DC10 cards based on the - zr36050 MJPEG codec and zr36016 VFE. - -config VIDEO_ZORAN_ZR36060 - tristate "Zoran ZR36060" - depends on VIDEO_ZORAN - help - Say Y to support Zoran boards based on 36060 chips. - This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 - and 33 R10 and AverMedia 6 boards. - -config VIDEO_ZORAN_BUZ - tristate "Iomega Buz support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Iomega Buz MJPEG capture/playback card. - -config VIDEO_ZORAN_DC10 - tristate "Pinnacle/Miro DC10(+) support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback - card. - -config VIDEO_ZORAN_LML33 - tristate "Linux Media Labs LML33 support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Linux Media Labs LML33 MJPEG capture/playback - card. - -config VIDEO_ZORAN_LML33R10 - tristate "Linux Media Labs LML33R10 support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO - help - support for the Linux Media Labs LML33R10 MJPEG capture/playback - card. - -config VIDEO_ZORAN_AVS6EYES - tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" - depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the AverMedia 6 Eyes video surveillance card. +source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" @@ -697,7 +628,7 @@ config VIDEO_MXB depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA7115 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO @@ -708,21 +639,6 @@ config VIDEO_MXB To compile this driver as a module, choose M here: the module will be called mxb. -config VIDEO_DPC - tristate "Philips-Semiconductors 'dpc7146 demonstration board'" - depends on PCI && VIDEO_V4L1 && I2C - select VIDEO_SAA7146_VV - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - ---help--- - This is a video4linux driver for the 'dpc7146 demonstration - board' by Philips-Semiconductors. It's the reference design - for SAA7146 bases boards, so if you have some unsupported - saa7146 based, analog video card, chances are good that it - will work with this skeleton driver. - - To compile this driver as a module, choose M here: the - module will be called dpc7146. - config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on PCI && VIDEO_V4L2 && I2C @@ -784,6 +700,70 @@ config VIDEO_CAFE_CCIC CMOS camera controller. This is the controller found on first- generation OLPC systems. +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA + select VIDEOBUF_GEN + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9M001_PCA9536_SWITCH + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config MT9M001_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9m001" + depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO + help + Select this if your MT9M001 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_MT9M111 + tristate "mt9m111 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9M111 cameras from Micron + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9V022_PCA9536_SWITCH + help + This driver supports MT9V022 cameras from Micron + +config MT9V022_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9v022" + depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO + help + Select this if your MT9V022 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_PLATFORM + tristate "platform camera support" + depends on SOC_CAMERA + help + This is a generic SoC camera platform driver, useful for testing + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x && SOC_CAMERA + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + +config VIDEO_SH_MOBILE_CEU + tristate "SuperH Mobile CEU Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA + select VIDEOBUF_DMA_CONTIG + ---help--- + This is a v4l2 driver for the SuperH Mobile CEU Interface + # # USB Multimedia device configuration # @@ -822,8 +802,7 @@ config VIDEO_OVCAMCHIP config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support" - depends on VIDEO_V4L1 && I2C - select VIDEO_OVCAMCHIP + depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP ---help--- Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. @@ -914,64 +893,4 @@ config USB_S2255 endif # V4L_USB_DRIVERS -config SOC_CAMERA - tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA - select VIDEOBUF_GEN - help - SoC Camera is a common API to several cameras, not connecting - over a bus like PCI or USB. For example some i2c camera connected - directly to the data bus of an SoC. - -config SOC_CAMERA_MT9M001 - tristate "mt9m001 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9M001_PCA9536_SWITCH - help - This driver supports MT9M001 cameras from Micron, monochrome - and colour models. - -config MT9M001_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9m001" - depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO - help - Select this if your MT9M001 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_MT9V022 - tristate "mt9v022 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9V022_PCA9536_SWITCH - help - This driver supports MT9V022 cameras from Micron - -config MT9V022_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9v022" - depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO - help - Select this if your MT9V022 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing - -config VIDEO_PXA27x - tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && PXA27x - select SOC_CAMERA - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the PXA27x Quick Capture Interface - -config VIDEO_SH_MOBILE_CEU - tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV && HAS_DMA - select SOC_CAMERA - select VIDEOBUF_DMA_CONTIG - ---help--- - This is a v4l2 driver for the SuperH Mobile CEU Interface - endif # VIDEO_CAPTURE_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index ef7c8d3ffb1..16962f3aa15 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -2,8 +2,6 @@ # Makefile for the video capture/playback device drivers. # -zr36067-objs := zoran_procfs.o zoran_device.o \ - zoran_driver.o zoran_card.o tuner-objs := tuner-core.o msp3400-objs := msp3400-driver.o msp3400-kthreads.o @@ -54,9 +52,7 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o obj-$(CONFIG_VIDEO_KS0127) += ks0127.o -obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o -obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o -obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o +obj-$(CONFIG_VIDEO_ZORAN) += zoran/ obj-$(CONFIG_VIDEO_PMS) += pms.o obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o @@ -84,8 +80,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o -obj-$(CONFIG_VIDEO_DPC) += dpc7146.o -obj-$(CONFIG_TUNER_3036) += tuner-3036.o obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o @@ -137,6 +131,7 @@ obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_SOC_CAMERA) += soc_camera.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index f794f2dbfb3..e0eb4f32144 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -29,43 +29,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Analog Devices ADV7170 video encoder driver"); MODULE_AUTHOR("Maxim Yevtyushkin"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(x) (x)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct adv7170 { @@ -80,21 +61,12 @@ struct adv7170 { int sat; }; -#define I2C_ADV7170 0xd4 -#define I2C_ADV7171 0x54 - -static char adv7170_name[] = "adv7170"; -static char adv7171_name[] = "adv7171"; - static char *inputs[] = { "pass_through", "play_back" }; static char *norms[] = { "PAL", "NTSC" }; /* ----------------------------------------------------------------------- */ -static inline int -adv7170_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int adv7170_write(struct i2c_client *client, u8 reg, u8 value) { struct adv7170 *encoder = i2c_get_clientdata(client); @@ -102,17 +74,13 @@ adv7170_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -adv7170_read (struct i2c_client *client, - u8 reg) +static inline int adv7170_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -adv7170_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int adv7170_write_block(struct i2c_client *client, + const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -133,33 +101,25 @@ adv7170_write_block (struct i2c_client *client, encoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = adv7170_write(client, reg, - *data++)) < 0) + ret = adv7170_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } } - return ret; } /* ----------------------------------------------------------------------- */ -// Output filter: S-Video Composite - -#define MR050 0x11 //0x09 -#define MR060 0x14 //0x0c - -//--------------------------------------------------------------------------- #define TR0MODE 0x4c #define TR0RST 0x80 @@ -167,7 +127,6 @@ adv7170_write_block (struct i2c_client *client, #define TR1CAPT 0x00 #define TR1PLAY 0x00 - static const unsigned char init_NTSC[] = { 0x00, 0x10, // MR0 0x01, 0x20, // MR1 @@ -227,15 +186,11 @@ static const unsigned char init_PAL[] = { }; -static int -adv7170_command (struct i2c_client *client, - unsigned int cmd, - void * arg) +static int adv7170_command(struct i2c_client *client, unsigned cmd, void *arg) { struct adv7170 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: #if 0 /* This is just for testing!!! */ @@ -254,18 +209,16 @@ adv7170_command (struct i2c_client *client, VIDEO_ENCODER_NTSC; cap->inputs = 2; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { int iarg = *(int *) arg; - dprintk(1, KERN_DEBUG "%s_command: set norm %d", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "set norm %d\n", iarg); switch (iarg) { - case VIDEO_MODE_NTSC: adv7170_write_block(client, init_NTSC, sizeof(init_NTSC)); @@ -285,16 +238,13 @@ adv7170_command (struct i2c_client *client, break; default: - dprintk(1, KERN_ERR "%s: illegal norm: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal norm: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_DEBUG "%s: switched to %s\n", I2C_NAME(client), - norms[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", norms[iarg]); encoder->norm = iarg; - } break; + } case ENCODER_SET_INPUT: { @@ -304,19 +254,17 @@ adv7170_command (struct i2c_client *client, *iarg = 1: input is from ZR36060 *iarg = 2: color bar */ - dprintk(1, KERN_DEBUG "%s_command: set input from %s\n", - I2C_NAME(client), + v4l_dbg(1, debug, client, "set input from %s\n", iarg == 0 ? "decoder" : "ZR36060"); switch (iarg) { - case 0: adv7170_write(client, 0x01, 0x20); adv7170_write(client, 0x08, TR1CAPT); /* TR1 */ adv7170_write(client, 0x02, 0x0e); // Enable genlock adv7170_write(client, 0x07, TR0MODE | TR0RST); adv7170_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; case 1: @@ -325,20 +273,17 @@ adv7170_command (struct i2c_client *client, adv7170_write(client, 0x02, 0x08); adv7170_write(client, 0x07, TR0MODE | TR0RST); adv7170_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; default: - dprintk(1, KERN_ERR "%s: illegal input: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal input: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_DEBUG "%s: switched to %s\n", I2C_NAME(client), - inputs[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", inputs[iarg]); encoder->input = iarg; - } break; + } case ENCODER_SET_OUTPUT: { @@ -348,16 +293,16 @@ adv7170_command (struct i2c_client *client, if (*iarg != 0) { return -EINVAL; } - } break; + } case ENCODER_ENABLE_OUTPUT: { int *iarg = arg; encoder->enable = !!*iarg; - } break; + } default: return -EINVAL; @@ -368,149 +313,67 @@ adv7170_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = - { I2C_ADV7170 >> 1, (I2C_ADV7170 >> 1) + 1, - I2C_ADV7171 >> 1, (I2C_ADV7171 >> 1) + 1, +static unsigned short normal_i2c[] = { + 0xd4 >> 1, 0xd6 >> 1, /* adv7170 IDs */ + 0x54 >> 1, 0x56 >> 1, /* adv7171 IDs */ I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; +I2C_CLIENT_INSMOD; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver i2c_driver_adv7170; - -static int -adv7170_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int adv7170_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i; - struct i2c_client *client; struct adv7170 *encoder; - char *dname; - - dprintk(1, - KERN_INFO - "adv7170.c: detecting adv7170 client on address 0x%x\n", - address << 1); + int i; /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_adv7170; - if ((client->addr == I2C_ADV7170 >> 1) || - (client->addr == (I2C_ADV7170 >> 1) + 1)) { - dname = adv7170_name; - } else if ((client->addr == I2C_ADV7171 >> 1) || - (client->addr == (I2C_ADV7171 >> 1) + 1)) { - dname = adv7171_name; - } else { - /* We should never get here!!! */ - kfree(client); - return 0; - } - strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct adv7170), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_NTSC; encoder->input = 0; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - i = adv7170_write_block(client, init_NTSC, sizeof(init_NTSC)); if (i >= 0) { i = adv7170_write(client, 0x07, TR0MODE | TR0RST); i = adv7170_write(client, 0x07, TR0MODE); i = adv7170_read(client, 0x12); - dprintk(1, KERN_INFO "%s_attach: rev. %d at 0x%02x\n", - I2C_NAME(client), i & 1, client->addr << 1); - } - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init error 0x%x\n", - I2C_NAME(client), i); + v4l_dbg(1, debug, client, "revision %d\n", i & 1); } - + if (i < 0) + v4l_dbg(1, debug, client, "init error 0x%x\n", i); return 0; } -static int -adv7170_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "adv7170.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &adv7170_detect_client); -} - -static int -adv7170_detach_client (struct i2c_client *client) +static int adv7170_remove(struct i2c_client *client) { - struct adv7170 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(encoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_adv7170 = { - .driver = { - .name = "adv7170", /* name */ - }, - - .id = I2C_DRIVERID_ADV7170, +static const struct i2c_device_id adv7170_id[] = { + { "adv7170", 0 }, + { "adv7171", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7170_id); - .attach_adapter = adv7170_attach_adapter, - .detach_client = adv7170_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "adv7170", + .driverid = I2C_DRIVERID_ADV7170, .command = adv7170_command, + .probe = adv7170_probe, + .remove = adv7170_remove, + .id_table = adv7170_id, }; - -static int __init -adv7170_init (void) -{ - return i2c_add_driver(&i2c_driver_adv7170); -} - -static void __exit -adv7170_exit (void) -{ - i2c_del_driver(&i2c_driver_adv7170); -} - -module_init(adv7170_init); -module_exit(adv7170_exit); diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 8ee07a68f70..6008e84653f 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -25,43 +25,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver"); MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct adv7175 { @@ -77,33 +58,23 @@ struct adv7175 { #define I2C_ADV7175 0xd4 #define I2C_ADV7176 0x54 -static char adv7175_name[] = "adv7175"; -static char adv7176_name[] = "adv7176"; - static char *inputs[] = { "pass_through", "play_back", "color_bar" }; static char *norms[] = { "PAL", "NTSC", "SECAM->PAL (may not work!)" }; /* ----------------------------------------------------------------------- */ -static inline int -adv7175_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int adv7175_write(struct i2c_client *client, u8 reg, u8 value) { return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -adv7175_read (struct i2c_client *client, - u8 reg) +static inline int adv7175_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -adv7175_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int adv7175_write_block(struct i2c_client *client, + const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -123,18 +94,17 @@ adv7175_write_block (struct i2c_client *client, reg++; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = adv7175_write(client, reg, - *data++)) < 0) + ret = adv7175_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -143,13 +113,11 @@ adv7175_write_block (struct i2c_client *client, return ret; } -static void -set_subcarrier_freq (struct i2c_client *client, - int pass_through) +static void set_subcarrier_freq(struct i2c_client *client, int pass_through) { /* for some reason pass_through NTSC needs * a different sub-carrier freq to remain stable. */ - if(pass_through) + if (pass_through) adv7175_write(client, 0x02, 0x00); else adv7175_write(client, 0x02, 0x55); @@ -160,12 +128,12 @@ set_subcarrier_freq (struct i2c_client *client, } /* ----------------------------------------------------------------------- */ -// Output filter: S-Video Composite +/* Output filter: S-Video Composite */ -#define MR050 0x11 //0x09 -#define MR060 0x14 //0x0c +#define MR050 0x11 /* 0x09 */ +#define MR060 0x14 /* 0x0c */ -//--------------------------------------------------------------------------- +/* ----------------------------------------------------------------------- */ #define TR0MODE 0x46 #define TR0RST 0x80 @@ -216,15 +184,11 @@ static const unsigned char init_ntsc[] = { 0x06, 0x1a, /* subc. phase */ }; -static int -adv7175_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) { struct adv7175 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: /* This is just for testing!!! */ adv7175_write_block(client, init_common, @@ -242,15 +206,14 @@ adv7175_command (struct i2c_client *client, VIDEO_ENCODER_SECAM; /* well, hacky */ cap->inputs = 2; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { int iarg = *(int *) arg; switch (iarg) { - case VIDEO_MODE_NTSC: adv7175_write_block(client, init_ntsc, sizeof(init_ntsc)); @@ -284,16 +247,13 @@ adv7175_command (struct i2c_client *client, adv7175_write(client, 0x07, TR0MODE); break; default: - dprintk(1, KERN_ERR "%s: illegal norm: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal norm: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_INFO "%s: switched to %s\n", I2C_NAME(client), - norms[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", norms[iarg]); encoder->norm = iarg; - } break; + } case ENCODER_SET_INPUT: { @@ -304,7 +264,6 @@ adv7175_command (struct i2c_client *client, *iarg = 2: color bar */ switch (iarg) { - case 0: adv7175_write(client, 0x01, 0x00); @@ -331,7 +290,7 @@ adv7175_command (struct i2c_client *client, adv7175_write(client, 0x0d, 0x49); adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; case 2: @@ -343,39 +302,35 @@ adv7175_command (struct i2c_client *client, adv7175_write(client, 0x0d, 0x49); adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; default: - dprintk(1, KERN_ERR "%s: illegal input: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal input: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_INFO "%s: switched to %s\n", I2C_NAME(client), - inputs[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", inputs[iarg]); encoder->input = iarg; - } break; + } case ENCODER_SET_OUTPUT: { int *iarg = arg; /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case ENCODER_ENABLE_OUTPUT: { int *iarg = arg; encoder->enable = !!*iarg; - } break; + } default: return -EINVAL; @@ -390,145 +345,67 @@ adv7175_command (struct i2c_client *client, * Generic i2c probe * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static unsigned short normal_i2c[] = - { I2C_ADV7175 >> 1, (I2C_ADV7175 >> 1) + 1, +static unsigned short normal_i2c[] = { + I2C_ADV7175 >> 1, (I2C_ADV7175 >> 1) + 1, I2C_ADV7176 >> 1, (I2C_ADV7176 >> 1) + 1, I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver i2c_driver_adv7175; +I2C_CLIENT_INSMOD; -static int -adv7175_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int adv7175_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; - struct i2c_client *client; struct adv7175 *encoder; - char *dname; - - dprintk(1, - KERN_INFO - "adv7175.c: detecting adv7175 client on address 0x%x\n", - address << 1); /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_adv7175; - if ((client->addr == I2C_ADV7175 >> 1) || - (client->addr == (I2C_ADV7175 >> 1) + 1)) { - dname = adv7175_name; - } else if ((client->addr == I2C_ADV7176 >> 1) || - (client->addr == (I2C_ADV7176 >> 1) + 1)) { - dname = adv7176_name; - } else { - /* We should never get here!!! */ - kfree(client); - return 0; - } - strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_PAL; encoder->input = 0; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - i = adv7175_write_block(client, init_common, sizeof(init_common)); if (i >= 0) { i = adv7175_write(client, 0x07, TR0MODE | TR0RST); i = adv7175_write(client, 0x07, TR0MODE); i = adv7175_read(client, 0x12); - dprintk(1, KERN_INFO "%s_attach: rev. %d at 0x%x\n", - I2C_NAME(client), i & 1, client->addr << 1); + v4l_dbg(1, debug, client, "revision %d\n", i & 1); } - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init error 0x%x\n", - I2C_NAME(client), i); - } - + if (i < 0) + v4l_dbg(1, debug, client, "init error 0x%x\n", i); return 0; } -static int -adv7175_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "adv7175.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &adv7175_detect_client); -} - -static int -adv7175_detach_client (struct i2c_client *client) +static int adv7175_remove(struct i2c_client *client) { - struct adv7175 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(encoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_adv7175 = { - .driver = { - .name = "adv7175", /* name */ - }, - - .id = I2C_DRIVERID_ADV7175, +static const struct i2c_device_id adv7175_id[] = { + { "adv7175", 0 }, + { "adv7176", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7175_id); - .attach_adapter = adv7175_attach_adapter, - .detach_client = adv7175_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "adv7175", + .driverid = I2C_DRIVERID_ADV7175, .command = adv7175_command, + .probe = adv7175_probe, + .remove = adv7175_remove, + .id_table = adv7175_id, }; - -static int __init -adv7175_init (void) -{ - return i2c_add_driver(&i2c_driver_adv7175); -} - -static void __exit -adv7175_exit (void) -{ - i2c_del_driver(&i2c_driver_adv7175); -} - -module_init(adv7175_init); -module_exit(adv7175_exit); diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 9e436ad3d34..218754b4906 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -116,6 +116,7 @@ struct ar_device { int width, height; int frame_bytes, line_bytes; wait_queue_head_t wait; + unsigned long in_use; struct mutex lock; }; @@ -269,7 +270,7 @@ static inline void wait_for_vertical_sync(int exp_line) static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) { struct video_device *v = video_devdata(file); - struct ar_device *ar = v->priv; + struct ar_device *ar = video_get_drvdata(v); long ret = ar->frame_bytes; /* return read bytes */ unsigned long arvcr1 = 0; unsigned long flags; @@ -399,7 +400,7 @@ static int ar_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { struct video_device *dev = video_devdata(file); - struct ar_device *ar = dev->priv; + struct ar_device *ar = video_get_drvdata(dev); DEBUG(1, "ar_ioctl()\n"); switch(cmd) { @@ -625,7 +626,7 @@ static void ar_interrupt(int irq, void *dev) */ static int ar_initialize(struct video_device *dev) { - struct ar_device *ar = dev->priv; + struct ar_device *ar = video_get_drvdata(dev); unsigned long cr = 0; int i,found=0; @@ -732,7 +733,7 @@ static int ar_initialize(struct video_device *dev) void ar_release(struct video_device *vfd) { - struct ar_device *ar = vfd->priv; + struct ar_device *ar = video_get_drvdata(vfd); mutex_lock(&ar->lock); video_device_release(vfd); } @@ -742,10 +743,23 @@ void ar_release(struct video_device *vfd) * Video4Linux Module functions * ****************************************************************************/ +static struct ar_device ardev; + +static int ar_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &ardev.in_use) ? -EBUSY : 0; +} + +static int ar_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &ardev.in_use); + return 0; +} + static const struct file_operations ar_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = ar_exclusive_open, + .release = ar_exclusive_release, .read = ar_read, .ioctl = ar_ioctl, #ifdef CONFIG_COMPAT @@ -762,7 +776,6 @@ static struct video_device ar_template = { }; #define ALIGN4(x) ((((int)(x)) & 0x3) == 0) -static struct ar_device ardev; static int __init ar_init(void) { @@ -802,7 +815,7 @@ static int __init ar_init(void) return -ENOMEM; } memcpy(ar->vdev, &ar_template, sizeof(ar_template)); - ar->vdev->priv = ar; + video_set_drvdata(ar->vdev, ar); if (vga) { ar->width = AR_WIDTH_VGA; diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index ed48908a903..d60123b413f 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = { /* Tuner callback function for au0828 boards. Currently only needed * for HVR1500Q, which has an xc5000 tuner. */ -int au0828_tuner_callback(void *priv, int command, int arg) +int au0828_tuner_callback(void *priv, int component, int command, int arg) { struct au0828_dev *dev = priv; @@ -90,6 +90,7 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */ + case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; @@ -185,7 +186,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) } /* table of devices that work with this driver */ -struct usb_device_id au0828_usb_id_table [] = { +struct usb_device_id au0828_usb_id_table[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x7240), @@ -198,6 +199,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x721b), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721e), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x721f), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x7280), diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c index d856de9f742..5765e865637 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/video/au0828/au0828-core.c @@ -91,7 +91,8 @@ static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, status = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), request, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, value, index, cp, size, 1000); diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index ba94be7e0ac..a882cf546d0 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -36,11 +36,39 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define _AU0828_BULKPIPE 0x83 #define _BULKPIPESIZE 0xe522 +static u8 hauppauge_hvr950q_led_states[] = { + 0x00, /* off */ + 0x02, /* yellow */ + 0x04, /* green */ +}; + +static struct au8522_led_config hauppauge_hvr950q_led_cfg = { + .gpio_output = 0x00e0, + .gpio_output_enable = 0x6006, + .gpio_output_disable = 0x0660, + + .gpio_leds = 0x00e2, + .led_states = hauppauge_hvr950q_led_states, + .num_led_states = sizeof(hauppauge_hvr950q_led_states), + + .vsb8_strong = 20 /* dB */ * 10, + .qam64_strong = 25 /* dB */ * 10, + .qam256_strong = 32 /* dB */ * 10, +}; + static struct au8522_config hauppauge_hvr950q_config = { .demod_address = 0x8e >> 1, .status_mode = AU8522_DEMODLOCKING, .qam_if = AU8522_IF_6MHZ, .vsb_if = AU8522_IF_6MHZ, + .led_cfg = &hauppauge_hvr950q_led_cfg, +}; + +static struct au8522_config fusionhdtv7usb_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_6MHZ, + .vsb_if = AU8522_IF_6MHZ, }; static struct au8522_config hauppauge_woodbury_config = { @@ -53,7 +81,6 @@ static struct au8522_config hauppauge_woodbury_config = { static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .i2c_address = 0x61, .if_khz = 6000, - .tuner_callback = au0828_tuner_callback }; static struct mxl5007t_config mxl5007t_hvr950q_config = { @@ -146,7 +173,8 @@ static int start_urb_transfer(struct au0828_dev *dev) purb->status = -EINPROGRESS; usb_fill_bulk_urb(purb, dev->usbdev, - usb_rcvbulkpipe(dev->usbdev, _AU0828_BULKPIPE), + usb_rcvbulkpipe(dev->usbdev, + _AU0828_BULKPIPE), purb->transfer_buffer, URB_BUFSIZE, urb_completion, @@ -353,14 +381,12 @@ int au0828_dvb_register(struct au0828_dev *dev) switch (dev->board) { case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: - case AU0828_BOARD_DVICO_FUSIONHDTV7: dvb->frontend = dvb_attach(au8522_attach, &hauppauge_hvr950q_config, &dev->i2c_adap); if (dvb->frontend != NULL) - dvb_attach(xc5000_attach, dvb->frontend, - &dev->i2c_adap, - &hauppauge_hvr950q_tunerconfig, dev); + dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, + &hauppauge_hvr950q_tunerconfig); break; case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: dvb->frontend = dvb_attach(au8522_attach, @@ -380,6 +406,16 @@ int au0828_dvb_register(struct au0828_dev *dev) 0x60, &dev->i2c_adap, &hauppauge_woodbury_tunerconfig); break; + case AU0828_BOARD_DVICO_FUSIONHDTV7: + dvb->frontend = dvb_attach(au8522_attach, + &fusionhdtv7usb_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) { + dvb_attach(xc5000_attach, dvb->frontend, + &dev->i2c_adap, + &hauppauge_hvr950q_tunerconfig); + } + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n"); @@ -390,6 +426,8 @@ int au0828_dvb_register(struct au0828_dev *dev) __func__); return -1; } + /* define general-purpose callback pointer */ + dvb->frontend->callback = au0828_tuner_callback; /* register everything */ ret = dvb_register(dev); diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h index 4f10ff30013..9d6a1161dc9 100644 --- a/drivers/media/video/au0828/au0828.h +++ b/drivers/media/video/au0828/au0828.h @@ -103,7 +103,8 @@ extern int au0828_debug; extern struct au0828_board au0828_boards[]; extern struct usb_device_id au0828_usb_id_table[]; extern void au0828_gpio_setup(struct au0828_dev *dev); -extern int au0828_tuner_callback(void *priv, int command, int arg); +extern int au0828_tuner_callback(void *priv, int component, + int command, int arg); extern void au0828_card_setup(struct au0828_dev *dev); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index ddd2a7964de..a07b7b88e5b 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -29,44 +29,25 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_decoder.h> - +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Brooktree-819 video decoder driver"); MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct bt819 { @@ -97,14 +78,9 @@ static struct timing timing_data[] = { {858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000}, }; -#define I2C_BT819 0x8a - /* ----------------------------------------------------------------------- */ -static inline int -bt819_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int bt819_write(struct i2c_client *client, u8 reg, u8 value) { struct bt819 *decoder = i2c_get_clientdata(client); @@ -112,24 +88,15 @@ bt819_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -bt819_setbit (struct i2c_client *client, - u8 reg, - u8 bit, - u8 value) +static inline int bt819_setbit(struct i2c_client *client, u8 reg, u8 bit, u8 value) { struct bt819 *decoder = i2c_get_clientdata(client); return bt819_write(client, reg, - (decoder-> - reg[reg] & ~(1 << bit)) | - (value ? (1 << bit) : 0)); + (decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0)); } -static int -bt819_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int bt819_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -150,10 +117,9 @@ bt819_write_block (struct i2c_client *client, decoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { @@ -169,20 +135,17 @@ bt819_write_block (struct i2c_client *client, return ret; } -static inline int -bt819_read (struct i2c_client *client, - u8 reg) +static inline int bt819_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -bt819_init (struct i2c_client *client) +static int bt819_init(struct i2c_client *client) { struct bt819 *decoder = i2c_get_clientdata(client); static unsigned char init[] = { - //0x1f, 0x00, /* Reset */ + /*0x1f, 0x00,*/ /* Reset */ 0x01, 0x59, /* 0x01 input format */ 0x02, 0x00, /* 0x02 temporal decimation */ 0x03, 0x12, /* 0x03 Cropping msb */ @@ -218,12 +181,10 @@ bt819_init (struct i2c_client *client) struct timing *timing = &timing_data[decoder->norm]; init[0x03 * 2 - 1] = - (((timing->vdelay >> 8) & 0x03) << 6) | (((timing-> - vactive >> 8) & - 0x03) << 4) | - (((timing->hdelay >> 8) & 0x03) << 2) | ((timing-> - hactive >> 8) & - 0x03); + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03); init[0x04 * 2 - 1] = timing->vdelay & 0xff; init[0x05 * 2 - 1] = timing->vactive & 0xff; init[0x06 * 2 - 1] = timing->hdelay & 0xff; @@ -238,27 +199,22 @@ bt819_init (struct i2c_client *client) /* init */ return bt819_write_block(client, init, sizeof(init)); - } /* ----------------------------------------------------------------------- */ -static int -bt819_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int bt819_command(struct i2c_client *client, unsigned cmd, void *arg) { int temp; struct bt819 *decoder = i2c_get_clientdata(client); - if (!decoder->initialized) { // First call to bt819_init could be - bt819_init(client); // without #FRST = 0 + if (!decoder->initialized) { /* First call to bt819_init could be */ + bt819_init(client); /* without #FRST = 0 */ decoder->initialized = 1; } switch (cmd) { - case 0: /* This is just for testing!!! */ bt819_init(client); @@ -274,8 +230,8 @@ bt819_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 8; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { @@ -285,9 +241,9 @@ bt819_command (struct i2c_client *client, status = bt819_read(client, 0x00); res = 0; - if ((status & 0x80)) { + if ((status & 0x80)) res |= DECODER_STATUS_GOOD; - } + switch (decoder->norm) { case VIDEO_MODE_NTSC: res |= DECODER_STATUS_NTSC; @@ -297,28 +253,25 @@ bt819_command (struct i2c_client *client, break; default: case VIDEO_MODE_AUTO: - if ((status & 0x10)) { + if ((status & 0x10)) res |= DECODER_STATUS_PAL; - } else { + else res |= DECODER_STATUS_NTSC; - } break; } res |= DECODER_STATUS_COLOR; *iarg = res; - dprintk(1, KERN_INFO "%s: get status %x\n", I2C_NAME(client), - *iarg); - } + v4l_dbg(1, debug, client, "get status %x\n", *iarg); break; + } case DECODER_SET_NORM: { int *iarg = arg; struct timing *timing = NULL; - dprintk(1, KERN_INFO "%s: set norm %x\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set norm %x\n", *iarg); switch (*iarg) { case VIDEO_MODE_NTSC: @@ -327,7 +280,7 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x01, 5, 0); bt819_write(client, 0x18, 0x68); bt819_write(client, 0x19, 0x5d); - //bt819_setbit(client, 0x1a, 5, 1); + /* bt819_setbit(client, 0x1a, 5, 1); */ timing = &timing_data[VIDEO_MODE_NTSC]; break; case VIDEO_MODE_PAL: @@ -336,7 +289,7 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x01, 5, 1); bt819_write(client, 0x18, 0x7f); bt819_write(client, 0x19, 0x72); - //bt819_setbit(client, 0x1a, 5, 0); + /* bt819_setbit(client, 0x1a, 5, 0); */ timing = &timing_data[VIDEO_MODE_PAL]; break; case VIDEO_MODE_AUTO: @@ -344,10 +297,7 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x01, 1, 0); break; default: - dprintk(1, - KERN_ERR - "%s: unsupported norm %d\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "unsupported norm %x\n", *iarg); return -EINVAL; } @@ -366,19 +316,17 @@ bt819_command (struct i2c_client *client, } decoder->norm = *iarg; - } break; + } case DECODER_SET_INPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set input %x\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set input %x\n", *iarg); - if (*iarg < 0 || *iarg > 7) { + if (*iarg < 0 || *iarg > 7) return -EINVAL; - } if (decoder->input != *iarg) { decoder->input = *iarg; @@ -391,52 +339,42 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x1a, 1, 0); } } - } break; + } case DECODER_SET_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set output %x\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set output %x\n", *iarg); /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case DECODER_ENABLE_OUTPUT: { int *iarg = arg; int enable = (*iarg != 0); - dprintk(1, KERN_INFO "%s: enable output %x\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "enable output %x\n", *iarg); if (decoder->enable != enable) { decoder->enable = enable; - - if (decoder->enable) { - bt819_setbit(client, 0x16, 7, 0); - } else { - bt819_setbit(client, 0x16, 7, 1); - } + bt819_setbit(client, 0x16, 7, !enable); } - } break; + } case DECODER_SET_PICTURE: { struct video_picture *pic = arg; - dprintk(1, - KERN_INFO - "%s: set picture brightness %d contrast %d colour %d\n", - I2C_NAME(client), pic->brightness, pic->contrast, - pic->colour); + v4l_dbg(1, debug, client, + "set picture brightness %d contrast %d colour %d\n", + pic->brightness, pic->contrast, pic->colour); if (decoder->bright != pic->brightness) { @@ -474,8 +412,8 @@ bt819_command (struct i2c_client *client, bt819_write(client, 0x0f, 128 - (decoder->hue >> 8)); } - } break; + } default: return -EINVAL; @@ -486,55 +424,44 @@ bt819_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { - I2C_BT819 >> 1, - I2C_CLIENT_END, -}; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x8a >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_bt819; +I2C_CLIENT_INSMOD; -static int -bt819_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int bt819_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i, id; + int i, ver; struct bt819 *decoder; - struct i2c_client *client; - - dprintk(1, - KERN_INFO - "bt819: detecting bt819 client on address 0x%x\n", - address << 1); + const char *name; /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_bt819; + ver = bt819_read(client, 0x17); + switch (ver & 0xf0) { + case 0x70: + name = "bt819a"; + break; + case 0x60: + name = "bt817a"; + break; + case 0x20: + name = "bt815a"; + break; + default: + v4l_dbg(1, debug, client, + "unknown chip version 0x%02x\n", ver); + return -ENODEV; + } + + v4l_info(client, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); + if (decoder == NULL) return -ENOMEM; - } decoder->norm = VIDEO_MODE_NTSC; decoder->input = 0; decoder->enable = 1; @@ -545,97 +472,33 @@ bt819_detect_client (struct i2c_adapter *adapter, decoder->initialized = 0; i2c_set_clientdata(client, decoder); - id = bt819_read(client, 0x17); - switch (id & 0xf0) { - case 0x70: - strlcpy(I2C_NAME(client), "bt819a", sizeof(I2C_NAME(client))); - break; - case 0x60: - strlcpy(I2C_NAME(client), "bt817a", sizeof(I2C_NAME(client))); - break; - case 0x20: - strlcpy(I2C_NAME(client), "bt815a", sizeof(I2C_NAME(client))); - break; - default: - dprintk(1, - KERN_ERR - "bt819: unknown chip version 0x%x (ver 0x%x)\n", - id & 0xf0, id & 0x0f); - kfree(decoder); - kfree(client); - return 0; - } - - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(decoder); - return i; - } - i = bt819_init(client); - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init status %d\n", - I2C_NAME(client), i); - } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version 0x%x at address 0x%x\n", - I2C_NAME(client), id & 0x0f, - client->addr << 1); - } - + if (i < 0) + v4l_dbg(1, debug, client, "init status %d\n", i); return 0; } -static int -bt819_attach_adapter (struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, &bt819_detect_client); -} - -static int -bt819_detach_client (struct i2c_client *client) +static int bt819_remove(struct i2c_client *client) { - struct bt819 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_bt819 = { - .driver = { - .name = "bt819", - }, - - .id = I2C_DRIVERID_BT819, +static const struct i2c_device_id bt819_id[] = { + { "bt819a", 0 }, + { "bt817a", 0 }, + { "bt815a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt819_id); - .attach_adapter = bt819_attach_adapter, - .detach_client = bt819_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "bt819", + .driverid = I2C_DRIVERID_BT819, .command = bt819_command, + .probe = bt819_probe, + .remove = bt819_remove, + .id_table = bt819_id, }; - -static int __init -bt819_init_module (void) -{ - return i2c_add_driver(&i2c_driver_bt819); -} - -static void __exit -bt819_exit (void) -{ - i2c_del_driver(&i2c_driver_bt819); -} - -module_init(bt819_init_module); -module_exit(bt819_exit); diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index 98ee2d8feb3..4213867507f 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -29,47 +29,28 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <linux/video_encoder.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> +#include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Brooktree-856A video encoder driver"); MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ -#define REG_OFFSET 0xDA -#define BT856_NR_REG 6 +#define BT856_REG_OFFSET 0xDA +#define BT856_NR_REG 6 struct bt856 { unsigned char reg[BT856_NR_REG]; @@ -78,61 +59,46 @@ struct bt856 { int enable; }; -#define I2C_BT856 0x88 - /* ----------------------------------------------------------------------- */ -static inline int -bt856_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int bt856_write(struct i2c_client *client, u8 reg, u8 value) { struct bt856 *encoder = i2c_get_clientdata(client); - encoder->reg[reg - REG_OFFSET] = value; + encoder->reg[reg - BT856_REG_OFFSET] = value; return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -bt856_setbit (struct i2c_client *client, - u8 reg, - u8 bit, - u8 value) +static inline int bt856_setbit(struct i2c_client *client, u8 reg, u8 bit, u8 value) { struct bt856 *encoder = i2c_get_clientdata(client); return bt856_write(client, reg, - (encoder-> - reg[reg - REG_OFFSET] & ~(1 << bit)) | - (value ? (1 << bit) : 0)); + (encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) | + (value ? (1 << bit) : 0)); } -static void -bt856_dump (struct i2c_client *client) +static void bt856_dump(struct i2c_client *client) { int i; struct bt856 *encoder = i2c_get_clientdata(client); - printk(KERN_INFO "%s: register dump:", I2C_NAME(client)); + v4l_info(client, "register dump:\n"); for (i = 0; i < BT856_NR_REG; i += 2) - printk(" %02x", encoder->reg[i]); - printk("\n"); + printk(KERN_CONT " %02x", encoder->reg[i]); + printk(KERN_CONT "\n"); } /* ----------------------------------------------------------------------- */ -static int -bt856_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) { struct bt856 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: /* This is just for testing!!! */ - dprintk(1, KERN_INFO "bt856: init\n"); + v4l_dbg(1, debug, client, "init\n"); bt856_write(client, 0xdc, 0x18); bt856_write(client, 0xda, 0); bt856_write(client, 0xde, 0); @@ -142,7 +108,6 @@ bt856_command (struct i2c_client *client, bt856_setbit(client, 0xdc, 4, 1); switch (encoder->norm) { - case VIDEO_MODE_NTSC: bt856_setbit(client, 0xdc, 2, 0); break; @@ -163,26 +128,23 @@ bt856_command (struct i2c_client *client, { struct video_encoder_capability *cap = arg; - dprintk(1, KERN_INFO "%s: get capabilities\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "get capabilities\n"); cap->flags = VIDEO_ENCODER_PAL | VIDEO_ENCODER_NTSC | VIDEO_ENCODER_CCIR; cap->inputs = 2; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set norm %d\n", *iarg); switch (*iarg) { - case VIDEO_MODE_NTSC: bt856_setbit(client, 0xdc, 2, 0); break; @@ -195,27 +157,23 @@ bt856_command (struct i2c_client *client, default: return -EINVAL; - } encoder->norm = *iarg; if (debug != 0) bt856_dump(client); - } break; + } case ENCODER_SET_INPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set input %d\n", *iarg); /* We only have video bus. * iarg = 0: input is from bt819 * iarg = 1: input is from ZR36060 */ - switch (*iarg) { - case 0: bt856_setbit(client, 0xde, 4, 0); bt856_setbit(client, 0xde, 3, 1); @@ -234,27 +192,24 @@ bt856_command (struct i2c_client *client, break; default: return -EINVAL; - } if (debug != 0) bt856_dump(client); - } break; + } case ENCODER_SET_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set output %d\n", *iarg); /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case ENCODER_ENABLE_OUTPUT: { @@ -262,10 +217,9 @@ bt856_command (struct i2c_client *client, encoder->enable = !!*iarg; - dprintk(1, KERN_INFO "%s: enable output %d\n", - I2C_NAME(client), encoder->enable); - } + v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable); break; + } default: return -EINVAL; @@ -276,64 +230,29 @@ bt856_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END }; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_bt856; +I2C_CLIENT_INSMOD; -static int -bt856_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int bt856_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i; - struct i2c_client *client; struct bt856 *encoder; - dprintk(1, - KERN_INFO - "bt856.c: detecting bt856 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_bt856; - strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_NTSC; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - bt856_write(client, 0xdc, 0x18); bt856_write(client, 0xda, 0); bt856_write(client, 0xde, 0); @@ -359,65 +278,26 @@ bt856_detect_client (struct i2c_adapter *adapter, if (debug != 0) bt856_dump(client); - - dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client), - client->addr << 1); - return 0; } -static int -bt856_attach_adapter (struct i2c_adapter *adapter) +static int bt856_remove(struct i2c_client *client) { - dprintk(1, - KERN_INFO - "bt856.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &bt856_detect_client); -} - -static int -bt856_detach_client (struct i2c_client *client) -{ - struct bt856 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(encoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } -/* ----------------------------------------------------------------------- */ - -static struct i2c_driver i2c_driver_bt856 = { - .driver = { - .name = "bt856", - }, - - .id = I2C_DRIVERID_BT856, +static const struct i2c_device_id bt856_id[] = { + { "bt856", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt856_id); - .attach_adapter = bt856_attach_adapter, - .detach_client = bt856_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "bt856", + .driverid = I2C_DRIVERID_BT856, .command = bt856_command, + .probe = bt856_probe, + .remove = bt856_remove, + .id_table = bt856_id, }; - -static int __init -bt856_init (void) -{ - return i2c_add_driver(&i2c_driver_bt856); -} - -static void __exit -bt856_exit (void) -{ - i2c_del_driver(&i2c_driver_bt856); -} - -module_init(bt856_init); -module_exit(bt856_exit); diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 96b415576f0..596f9e2376b 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -29,42 +29,28 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <linux/sched.h> #include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> #include <linux/i2c.h> - +#include <linux/i2c-id.h> #include <linux/videodev.h> -#include <asm/uaccess.h> - #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> +MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); -#define BT866_DEVNAME "bt866" -#define I2C_BT866 0x88 - -MODULE_LICENSE("GPL"); - -#define DEBUG(x) /* Debug driver */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ struct bt866 { - struct i2c_client *i2c; - int addr; - unsigned char reg[256]; + u8 reg[256]; int norm; int enable; @@ -74,20 +60,45 @@ struct bt866 { int sat; }; -static int bt866_write(struct bt866 *dev, - unsigned char subaddr, unsigned char data); +static int bt866_write(struct i2c_client *client, u8 subaddr, u8 data) +{ + struct bt866 *encoder = i2c_get_clientdata(client); + u8 buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data); + + for (err = 0; err < 3;) { + if (i2c_master_send(client, buffer, 2) == 2) + break; + err++; + v4l_warn(client, "error #%d writing to 0x%02x\n", + err, subaddr); + schedule_timeout_interruptible(msecs_to_jiffies(100)); + } + if (err == 3) { + v4l_warn(client, "giving up\n"); + return -1; + } + + return 0; +} -static int bt866_do_command(struct bt866 *encoder, - unsigned int cmd, void *arg) +static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) { + struct bt866 *encoder = i2c_get_clientdata(client); + switch (cmd) { case ENCODER_GET_CAPABILITIES: { struct video_encoder_capability *cap = arg; - DEBUG(printk - (KERN_INFO "%s: get capabilities\n", - encoder->i2c->name)); + v4l_dbg(1, debug, client, "get capabilities\n"); cap->flags = VIDEO_ENCODER_PAL @@ -95,18 +106,16 @@ static int bt866_do_command(struct bt866 *encoder, | VIDEO_ENCODER_CCIR; cap->inputs = 2; cap->outputs = 1; + break; } - break; case ENCODER_SET_NORM: { int *iarg = arg; - DEBUG(printk(KERN_INFO "%s: set norm %d\n", - encoder->i2c->name, *iarg)); + v4l_dbg(1, debug, client, "set norm %d\n", *iarg); switch (*iarg) { - case VIDEO_MODE_NTSC: break; @@ -115,11 +124,10 @@ static int bt866_do_command(struct bt866 *encoder, default: return -EINVAL; - } encoder->norm = *iarg; + break; } - break; case ENCODER_SET_INPUT: { @@ -155,7 +163,7 @@ static int bt866_do_command(struct bt866 *encoder, u8 val; for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) - bt866_write(encoder, init[i], init[i+1]); + bt866_write(client, init[i], init[i+1]); val = encoder->reg[0xdc]; @@ -164,17 +172,16 @@ static int bt866_do_command(struct bt866 *encoder, else val &= ~0x40; /* !CBSWAP */ - bt866_write(encoder, 0xdc, val); + bt866_write(client, 0xdc, val); val = encoder->reg[0xcc]; if (*iarg == 2) val |= 0x01; /* OSDBAR */ else val &= ~0x01; /* !OSDBAR */ - bt866_write(encoder, 0xcc, val); + bt866_write(client, 0xcc, val); - DEBUG(printk(KERN_INFO "%s: set input %d\n", - encoder->i2c->name, *iarg)); + v4l_dbg(1, debug, client, "set input %d\n", *iarg); switch (*iarg) { case 0: @@ -183,48 +190,44 @@ static int bt866_do_command(struct bt866 *encoder, break; default: return -EINVAL; - } + break; } - break; case ENCODER_SET_OUTPUT: { int *iarg = arg; - DEBUG(printk(KERN_INFO "%s: set output %d\n", - encoder->i2c->name, *iarg)); + v4l_dbg(1, debug, client, "set output %d\n", *iarg); /* not much choice of outputs */ if (*iarg != 0) return -EINVAL; + break; } - break; case ENCODER_ENABLE_OUTPUT: { int *iarg = arg; encoder->enable = !!*iarg; - DEBUG(printk - (KERN_INFO "%s: enable output %d\n", - encoder->i2c->name, encoder->enable)); + v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable); + break; } - break; case 4711: { int *iarg = arg; __u8 val; - printk("bt866: square = %d\n", *iarg); + v4l_dbg(1, debug, client, "square %d\n", *iarg); val = encoder->reg[0xdc]; if (*iarg) val |= 1; /* SQUARE */ else val &= ~1; /* !SQUARE */ - bt866_write(encoder, 0xdc, val); + bt866_write(client, 0xdc, val); break; } @@ -235,141 +238,49 @@ static int bt866_do_command(struct bt866 *encoder, return 0; } -static int bt866_write(struct bt866 *encoder, - unsigned char subaddr, unsigned char data) -{ - unsigned char buffer[2]; - int err; +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; - buffer[0] = subaddr; - buffer[1] = data; - - encoder->reg[subaddr] = data; +I2C_CLIENT_INSMOD; - DEBUG(printk - ("%s: write 0x%02X = 0x%02X\n", - encoder->i2c->name, subaddr, data)); - - for (err = 0; err < 3;) { - if (i2c_master_send(encoder->i2c, buffer, 2) == 2) - break; - err++; - printk(KERN_WARNING "%s: I/O error #%d " - "(write 0x%02x/0x%02x)\n", - encoder->i2c->name, err, encoder->addr, subaddr); - schedule_timeout_interruptible(msecs_to_jiffies(100)); - } - if (err == 3) { - printk(KERN_WARNING "%s: giving up\n", - encoder->i2c->name); - return -1; - } - - return 0; -} - -static int bt866_attach(struct i2c_adapter *adapter); -static int bt866_detach(struct i2c_client *client); -static int bt866_command(struct i2c_client *client, - unsigned int cmd, void *arg); - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = {I2C_BT866>>1, I2C_CLIENT_END}; -static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; -static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; - -static struct i2c_client_address_data addr_data = { - normal_i2c, - probe, - ignore, -}; - -static struct i2c_driver i2c_driver_bt866 = { - .driver.name = BT866_DEVNAME, - .id = I2C_DRIVERID_BT866, - .attach_adapter = bt866_attach, - .detach_client = bt866_detach, - .command = bt866_command -}; - - -static struct i2c_client bt866_client_tmpl = -{ - .name = "(nil)", - .addr = 0, - .adapter = NULL, - .driver = &i2c_driver_bt866, -}; - -static int bt866_found_proc(struct i2c_adapter *adapter, - int addr, int kind) +static int bt866_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct bt866 *encoder; - struct i2c_client *client; - client = kzalloc(sizeof(*client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &bt866_client_tmpl, sizeof(*client)); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } i2c_set_clientdata(client, encoder); - client->adapter = adapter; - client->addr = addr; - sprintf(client->name, "%s-%02x", BT866_DEVNAME, adapter->id); - - encoder->i2c = client; - encoder->addr = addr; - //encoder->encoder_type = ENCODER_TYPE_UNKNOWN; - - /* initialize */ - - i2c_attach_client(client); - - return 0; -} - -static int bt866_attach(struct i2c_adapter *adapter) -{ - if (adapter->id == I2C_HW_B_ZR36067) - return i2c_probe(adapter, &addr_data, bt866_found_proc); - return 0; -} - -static int bt866_detach(struct i2c_client *client) -{ - struct bt866 *encoder = i2c_get_clientdata(client); - - i2c_detach_client(client); - kfree(encoder); - kfree(client); - return 0; } -static int bt866_command(struct i2c_client *client, - unsigned int cmd, void *arg) +static int bt866_remove(struct i2c_client *client) { - struct bt866 *encoder = i2c_get_clientdata(client); - return bt866_do_command(encoder, cmd, arg); -} - -static int __devinit bt866_init(void) -{ - i2c_add_driver(&i2c_driver_bt866); + kfree(i2c_get_clientdata(client)); return 0; } -static void __devexit bt866_exit(void) +static int bt866_legacy_probe(struct i2c_adapter *adapter) { - i2c_del_driver(&i2c_driver_bt866); + return adapter->id == I2C_HW_B_ZR36067; } -module_init(bt866_init); -module_exit(bt866_exit); +static const struct i2c_device_id bt866_id[] = { + { "bt866", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt866_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "bt866", + .driverid = I2C_DRIVERID_BT866, + .command = bt866_command, + .probe = bt866_probe, + .remove = bt866_remove, + .legacy_probe = bt866_legacy_probe, + .id_table = bt866_id, +}; diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 6081edc362d..13742b0bbe3 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -305,7 +305,7 @@ static struct CARD { { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, - + { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, { 0, -1, NULL } }; @@ -3037,6 +3037,31 @@ struct tvcard bttv_tvcards[] = { .has_radio = 1, .has_remote = 1, }, + [BTTV_BOARD_ENLTV_FM_2] = { + /* Encore TV Tuner Pro ENL TV-FM-2 + Mauro Carvalho Chehab <mchehab@infradead.org */ + .name = "Encore ENL TV-FM-2", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + /* bit 6 -> IR disabled + bit 18/17 = 00 -> mute + 01 -> enable external audio input + 10 -> internal audio input (mono?) + 11 -> internal audio input + */ + .gpiomask = 0x060040, + .muxsel = { 2, 3, 3 }, + .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, + .gpiomute = 0, + .tuner_type = TUNER_TCL_MF02GIP_5N, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + } }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 933eaef41ea..5858bf5ff41 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -76,9 +76,9 @@ static unsigned int gbuffers = 8; static unsigned int gbufsize = 0x208000; static unsigned int reset_crop = 1; -static int video_nr = -1; -static int radio_nr = -1; -static int vbi_nr = -1; +static int video_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; static int debug_latency; static unsigned int fdsr; @@ -108,9 +108,6 @@ module_param(irq_debug, int, 0644); module_param(debug_latency, int, 0644); module_param(fdsr, int, 0444); -module_param(video_nr, int, 0444); -module_param(radio_nr, int, 0444); -module_param(vbi_nr, int, 0444); module_param(gbuffers, int, 0444); module_param(gbufsize, int, 0444); module_param(reset_crop, int, 0444); @@ -130,7 +127,10 @@ module_param(uv_ratio, int, 0444); module_param(full_luma_range, int, 0444); module_param(coring, int, 0444); -module_param_array(radio, int, NULL, 0444); +module_param_array(radio, int, NULL, 0444); +module_param_array(video_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); MODULE_PARM_DESC(radio,"The TV card supports radio, default is 0 (no)"); MODULE_PARM_DESC(bigendian,"byte order of the framebuffer, default is native endian"); @@ -152,6 +152,9 @@ MODULE_PARM_DESC(irq_iswitch,"switch inputs in irq handler"); MODULE_PARM_DESC(uv_ratio,"ratio between u and v gains, default is 50"); MODULE_PARM_DESC(full_luma_range,"use the full luma range, default is 0 (no)"); MODULE_PARM_DESC(coring,"set the luma coring level, default is 0 (no)"); +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards"); MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr"); @@ -1367,7 +1370,7 @@ static void init_irqreg(struct bttv *btv) (btv->gpioirq ? BT848_INT_GPINT : 0) | BT848_INT_SCERR | (fdsr ? BT848_INT_FDSR : 0) | - BT848_INT_RISCI|BT848_INT_OCERR|BT848_INT_VPRES| + BT848_INT_RISCI | BT848_INT_OCERR | BT848_INT_FMTCHG|BT848_INT_HLOCK| BT848_INT_I2CDONE, BT848_INT_MASK); @@ -2661,18 +2664,6 @@ static int bttv_querycap(struct file *file, void *priv, return 0; } -static int bttv_enum_fmt_vbi_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (0 != f->index) - return -EINVAL; - - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - - return 0; -} - static int bttv_enum_fmt_cap_ovr(struct v4l2_fmtdesc *f) { int index = -1, i; @@ -3227,6 +3218,7 @@ static int bttv_open(struct inode *inode, struct file *file) dprintk(KERN_DEBUG "bttv: open minor=%d\n",minor); + lock_kernel(); for (i = 0; i < bttv_num; i++) { if (bttvs[i].video_dev && bttvs[i].video_dev->minor == minor) { @@ -3241,16 +3233,20 @@ static int bttv_open(struct inode *inode, struct file *file) break; } } - if (NULL == btv) + if (NULL == btv) { + unlock_kernel(); return -ENODEV; + } dprintk(KERN_DEBUG "bttv%d: open called (type=%s)\n", btv->c.nr,v4l2_type_names[type]); /* allocate per filehandle data */ fh = kmalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; *fh = btv->init; fh->type = type; @@ -3270,6 +3266,7 @@ static int bttv_open(struct inode *inode, struct file *file) sizeof(struct bttv_buffer), fh); set_tvnorm(btv,btv->tvnorm); + set_input(btv, btv->input, btv->tvnorm); btv->users++; @@ -3290,6 +3287,7 @@ static int bttv_open(struct inode *inode, struct file *file) bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm); bttv_field_count(btv); + unlock_kernel(); return 0; } @@ -3330,6 +3328,10 @@ static int bttv_release(struct inode *inode, struct file *file) btv->users--; bttv_field_count(btv); + + if (!btv->users) + audio_mute(btv, 1); + return 0; } @@ -3367,7 +3369,6 @@ static const struct v4l2_ioctl_ops bttv_ioctl_ops = { .vidioc_g_fmt_vid_overlay = bttv_g_fmt_vid_overlay, .vidioc_try_fmt_vid_overlay = bttv_try_fmt_vid_overlay, .vidioc_s_fmt_vid_overlay = bttv_s_fmt_vid_overlay, - .vidioc_enum_fmt_vbi_cap = bttv_enum_fmt_vbi_cap, .vidioc_g_fmt_vbi_cap = bttv_g_fmt_vbi_cap, .vidioc_try_fmt_vbi_cap = bttv_try_fmt_vbi_cap, .vidioc_s_fmt_vbi_cap = bttv_s_fmt_vbi_cap, @@ -3430,21 +3431,26 @@ static int radio_open(struct inode *inode, struct file *file) dprintk("bttv: open minor=%d\n",minor); + lock_kernel(); for (i = 0; i < bttv_num; i++) { if (bttvs[i].radio_dev && bttvs[i].radio_dev->minor == minor) { btv = &bttvs[i]; break; } } - if (NULL == btv) + if (NULL == btv) { + unlock_kernel(); return -ENODEV; + } dprintk("bttv%d: open called (radio)\n",btv->c.nr); /* allocate per filehandle data */ fh = kmalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; *fh = btv->init; v4l2_prio_open(&btv->prio, &fh->prio); @@ -3457,6 +3463,7 @@ static int radio_open(struct inode *inode, struct file *file) audio_input(btv,TVAUDIO_INPUT_RADIO); mutex_unlock(&btv->lock); + unlock_kernel(); return 0; } @@ -4235,7 +4242,8 @@ static int __devinit bttv_register_video(struct bttv *btv) if (NULL == btv->video_dev) goto err; - if (video_register_device(btv->video_dev,VFL_TYPE_GRABBER,video_nr)<0) + if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER, + video_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device video%d\n", btv->c.nr,btv->video_dev->minor & 0x1f); @@ -4251,7 +4259,8 @@ static int __devinit bttv_register_video(struct bttv *btv) if (NULL == btv->vbi_dev) goto err; - if (video_register_device(btv->vbi_dev,VFL_TYPE_VBI,vbi_nr)<0) + if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI, + vbi_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device vbi%d\n", btv->c.nr,btv->vbi_dev->minor & 0x1f); @@ -4262,7 +4271,8 @@ static int __devinit bttv_register_video(struct bttv *btv) btv->radio_dev = vdev_init(btv, &radio_template, "radio"); if (NULL == btv->radio_dev) goto err; - if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0) + if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO, + radio_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device radio%d\n", btv->c.nr,btv->radio_dev->minor & 0x1f); diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index a38af98f4ca..2f289d981fe 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -28,8 +28,8 @@ #include "bttvp.h" -static int debug; -module_param(debug, int, 0644); /* debug level (0,1,2) */ +static int ir_debug; +module_param(ir_debug, int, 0644); static int repeat_delay = 500; module_param(repeat_delay, int, 0644); static int repeat_period = 33; @@ -40,6 +40,12 @@ module_param(ir_rc5_remote_gap, int, 0644); static int ir_rc5_key_timeout = 200; module_param(ir_rc5_key_timeout, int, 0644); +#undef dprintk +#define dprintk(arg...) do { \ + if (ir_debug >= 1) \ + printk(arg); \ +} while (0) + #define DEVNAME "bttv-input" /* ---------------------------------------------------------------------- */ @@ -79,6 +85,45 @@ static void ir_handle_key(struct bttv *btv) } +static void ir_enltv_handle_key(struct bttv *btv) +{ + struct card_ir *ir = btv->remote; + u32 gpio, data, keyup; + + /* read gpio value */ + gpio = bttv_gpio_read(&btv->c); + + /* extract data */ + data = ir_extract_bits(gpio, ir->mask_keycode); + + /* Check if it is keyup */ + keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0; + + if ((ir->last_gpio & 0x7f) != data) { + dprintk(KERN_INFO DEVNAME ": gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "up/down"); + + ir_input_keydown(ir->dev, &ir->ir, data, data); + if (keyup) + ir_input_nokey(ir->dev, &ir->ir); + } else { + if ((ir->last_gpio & 1 << 31) == keyup) + return; + + dprintk(KERN_INFO DEVNAME ":(cnt) gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "down"); + + if (keyup) + ir_input_nokey(ir->dev, &ir->ir); + else + ir_input_keydown(ir->dev, &ir->ir, data, data); + } + + ir->last_gpio = data | keyup; +} + void bttv_input_irq(struct bttv *btv) { struct card_ir *ir = btv->remote; @@ -92,7 +137,10 @@ static void bttv_input_timer(unsigned long data) struct bttv *btv = (struct bttv*)data; struct card_ir *ir = btv->remote; - ir_handle_key(btv); + if (btv->c.type == BTTV_BOARD_ENLTV_FM_2) + ir_enltv_handle_key(btv); + else + ir_handle_key(btv); mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); } @@ -284,6 +332,14 @@ int bttv_input_init(struct bttv *btv) ir->mask_keyup = 0x006000; ir->polling = 50; /* ms */ break; + case BTTV_BOARD_ENLTV_FM_2: + ir_codes = ir_codes_encore_enltv2; + ir->mask_keycode = 0x00fd00; + ir->mask_keyup = 0x000080; + ir->polling = 1; /* ms */ + ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c), + ir->mask_keycode); + break; } if (NULL == ir_codes) { dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type); diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index 6d93d16c96e..46cb90e0985 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -176,7 +176,7 @@ #define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95 #define BTTV_BOARD_GEOVISION_GV600 0x96 #define BTTV_BOARD_KOZUMI_KTV_01C 0x97 - +#define BTTV_BOARD_ENLTV_FM_2 0x98 /* more card-specific defines */ #define PT2254_L_CHANNEL 0x10 diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index 3324ab38f58..ac1b2687a20 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -64,7 +64,7 @@ int btcx_riscmem_alloc(struct pci_dev *pci, unsigned int size) { __le32 *cpu; - dma_addr_t dma; + dma_addr_t dma = 0; if (NULL != risc->cpu && risc->size < size) btcx_riscmem_free(pci,risc); diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 6e39e253ce5..ace4ff9ea02 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -495,7 +495,7 @@ static void qc_set(struct qcam_device *q) val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * q->transfer_scale; } - val = (val + val2 - 1) / val2; + val = DIV_ROUND_UP(val, val2); qc_command(q, 0x13); qc_command(q, val); @@ -651,7 +651,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l transperline = q->width * q->bpp; divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * q->transfer_scale; - transperline = (transperline + divisor - 1) / divisor; + transperline = DIV_ROUND_UP(transperline, divisor); for (i = 0, yield = yieldlines; i < linestotrans; i++) { @@ -894,10 +894,27 @@ static ssize_t qcam_read(struct file *file, char __user *buf, return len; } +static int qcam_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0; +} + +static int qcam_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + clear_bit(0, &qcam->in_use); + return 0; +} + static const struct file_operations qcam_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = qcam_exclusive_open, + .release = qcam_exclusive_release, .ioctl = qcam_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -909,6 +926,7 @@ static struct video_device qcam_template= { .name = "Connectix Quickcam", .fops = &qcam_fops, + .release = video_device_release_empty, }; #define MAX_CAMS 4 diff --git a/drivers/media/video/bw-qcam.h b/drivers/media/video/bw-qcam.h index 6701dafbc0d..8a60c5de093 100644 --- a/drivers/media/video/bw-qcam.h +++ b/drivers/media/video/bw-qcam.h @@ -65,4 +65,5 @@ struct qcam_device { int top, left; int status; unsigned int saved_bits; + unsigned long in_use; }; diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 7f6c6b4bec1..17aa0adb346 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -51,6 +51,7 @@ struct qcam_device { int contrast, brightness, whitebal; int top, left; unsigned int bidirectional; + unsigned long in_use; struct mutex lock; }; @@ -687,11 +688,28 @@ static ssize_t qcam_read(struct file *file, char __user *buf, return len; } +static int qcam_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0; +} + +static int qcam_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + clear_bit(0, &qcam->in_use); + return 0; +} + /* video device template */ static const struct file_operations qcam_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = qcam_exclusive_open, + .release = qcam_exclusive_release, .ioctl = qcam_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -704,6 +722,7 @@ static struct video_device qcam_template= { .name = "Colour QuickCam", .fops = &qcam_fops, + .release = video_device_release_empty, }; /* Initialize the QuickCam driver control structure. */ diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 5405c30dbb0..fc9497bdd32 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -1476,9 +1476,12 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) { struct cafe_camera *cam; + lock_kernel(); cam = cafe_find_dev(iminor(inode)); - if (cam == NULL) + if (cam == NULL) { + unlock_kernel(); return -ENODEV; + } filp->private_data = cam; mutex_lock(&cam->s_mutex); @@ -1490,6 +1493,7 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) } (cam->users)++; mutex_unlock(&cam->s_mutex); + unlock_kernel(); return 0; } @@ -2092,15 +2096,8 @@ static int cafe_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int ret; - u16 classword; struct cafe_camera *cam; - /* - * Make sure we have a camera here - we'll get calls for - * the other cafe devices as well. - */ - pci_read_config_word(pdev, PCI_CLASS_DEVICE, &classword); - if (classword != PCI_CLASS_MULTIMEDIA_VIDEO) - return -ENODEV; + /* * Start putting together one of our big camera structures. */ @@ -2288,8 +2285,8 @@ static int cafe_pci_resume(struct pci_dev *pdev) static struct pci_device_id cafe_ids[] = { - { PCI_DEVICE(0x11ab, 0x4100) }, /* Eventual real ID */ - { PCI_DEVICE(0x11ab, 0x4102) }, /* Really eventual real ID */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, + PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) }, { 0, } }; diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index a661800b0e6..1798b779a25 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -39,10 +39,6 @@ #include <asm/io.h> #include <linux/mutex.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - #include "cpia.h" static int video_nr = -1; @@ -3155,7 +3151,7 @@ static void put_cam(struct cpia_camera_ops* ops) static int cpia_open(struct inode *inode, struct file *file) { struct video_device *dev = video_devdata(file); - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int err; if (!cam) { @@ -3202,7 +3198,7 @@ static int cpia_open(struct inode *inode, struct file *file) /* Set ownership of /proc/cpia/videoX to current user */ if(cam->proc_entry) - cam->proc_entry->uid = current->uid; + cam->proc_entry->uid = current_uid(); /* set mark for loading first frame uncompressed */ cam->first_frame = 1; @@ -3232,7 +3228,7 @@ static int cpia_open(struct inode *inode, struct file *file) static int cpia_close(struct inode *inode, struct file *file) { struct video_device *dev = file->private_data; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); if (cam->ops) { /* Return ownership of /proc/cpia/videoX to root */ @@ -3284,7 +3280,7 @@ static ssize_t cpia_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct video_device *dev = file->private_data; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int err; /* make this _really_ smp and multithread-safe */ @@ -3341,7 +3337,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, void *arg) { struct video_device *dev = file->private_data; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int retval = 0; if (!cam || !cam->ops) @@ -3739,7 +3735,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma) unsigned long start = vma->vm_start; unsigned long size = vma->vm_end - vma->vm_start; unsigned long page, pos; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int retval; if (!cam || !cam->ops) @@ -3801,6 +3797,7 @@ static const struct file_operations cpia_fops = { static struct video_device cpia_template = { .name = "CPiA Camera", .fops = &cpia_fops, + .release = video_device_release_empty, }; /* initialise cam_data structure */ @@ -3928,7 +3925,7 @@ static void init_camera_struct(struct cam_data *cam, cam->proc_entry = NULL; memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template)); - cam->vdev.priv = cam; + video_set_drvdata(&cam->vdev, cam); cam->curframe = 0; for (i = 0; i < FRAME_NUM; i++) { diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index af8b9ec8e35..7e791b6923f 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -1537,7 +1537,7 @@ static int config_sensor_500(struct camera_data *cam, * * This sets all user changeable properties to the values in cam->params. *****************************************************************************/ -int set_all_properties(struct camera_data *cam) +static int set_all_properties(struct camera_data *cam) { /** * Don't set target_kb here, it will be set later. @@ -1588,7 +1588,7 @@ void cpia2_save_camera_state(struct camera_data *cam) * get_color_params * *****************************************************************************/ -void get_color_params(struct camera_data *cam) +static void get_color_params(struct camera_data *cam) { cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS, TRANSFER_READ, 0); cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION, TRANSFER_READ, 0); @@ -1881,7 +1881,7 @@ void cpia2_set_saturation(struct camera_data *cam, unsigned char value) * wake_system * *****************************************************************************/ -void wake_system(struct camera_data *cam) +static void wake_system(struct camera_data *cam) { cpia2_do_command(cam, CPIA2_CMD_SET_WAKEUP, TRANSFER_WRITE, 0); } @@ -1892,7 +1892,7 @@ void wake_system(struct camera_data *cam) * * Valid for STV500 sensor only *****************************************************************************/ -void set_lowlight_boost(struct camera_data *cam) +static void set_lowlight_boost(struct camera_data *cam) { struct cpia2_command cmd; @@ -2169,7 +2169,7 @@ void cpia2_dbg_dump_registers(struct camera_data *cam) * * Sets all values to the defaults *****************************************************************************/ -void reset_camera_struct(struct camera_data *cam) +static void reset_camera_struct(struct camera_data *cam) { /*** * The following parameter values are the defaults from the register map. diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c index a8a199047cb..73511a54207 100644 --- a/drivers/media/video/cpia2/cpia2_usb.c +++ b/drivers/media/video/cpia2/cpia2_usb.c @@ -478,7 +478,7 @@ int cpia2_usb_change_streaming_alternate(struct camera_data *cam, * set_alternate * *****************************************************************************/ -int set_alternate(struct camera_data *cam, unsigned int alt) +static int set_alternate(struct camera_data *cam, unsigned int alt) { int ret = 0; diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index eb9f15cd4c4..897e8d1a5c3 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -241,8 +241,7 @@ static struct v4l2_queryctrl controls[] = { *****************************************************************************/ static int cpia2_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); + struct camera_data *cam = video_drvdata(file); int retval = 0; if (!cam) { @@ -357,8 +356,7 @@ static int cpia2_close(struct inode *inode, struct file *file) static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *off) { - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); + struct camera_data *cam = video_drvdata(file); int noblock = file->f_flags&O_NONBLOCK; struct cpia2_fh *fh = file->private_data; @@ -382,9 +380,7 @@ static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, *****************************************************************************/ static unsigned int cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait) { - struct video_device *dev = video_devdata(filp); - struct camera_data *cam = video_get_drvdata(dev); - + struct camera_data *cam = video_drvdata(filp); struct cpia2_fh *fh = filp->private_data; if(!cam) @@ -1579,8 +1575,7 @@ static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) static int cpia2_do_ioctl(struct inode *inode, struct file *file, unsigned int ioctl_nr, void *arg) { - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); + struct camera_data *cam = video_drvdata(file); int retval = 0; if (!cam) @@ -1860,9 +1855,8 @@ static int cpia2_ioctl(struct inode *inode, struct file *file, *****************************************************************************/ static int cpia2_mmap(struct file *file, struct vm_area_struct *area) { + struct camera_data *cam = video_drvdata(file); int retval; - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); /* Priority check */ struct cpia2_fh *fh = file->private_data; diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/video/cx18/Makefile index b23d2e26120..f7bf0edf93f 100644 --- a/drivers/media/video/cx18/Makefile +++ b/drivers/media/video/cx18/Makefile @@ -2,7 +2,7 @@ cx18-objs := cx18-driver.o cx18-cards.o cx18-i2c.o cx18-firmware.o cx18-gpio. cx18-queue.o cx18-streams.o cx18-fileops.o cx18-ioctl.o cx18-controls.o \ cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \ cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \ - cx18-dvb.o + cx18-dvb.o cx18-io.o obj-$(CONFIG_VIDEO_CX18) += cx18.o diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c index 6d5b94fc708..57beddf0af4 100644 --- a/drivers/media/video/cx18/cx18-audio.c +++ b/drivers/media/video/cx18/cx18-audio.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-i2c.h" #include "cx18-cards.h" #include "cx18-audio.h" @@ -60,10 +61,10 @@ int cx18_audio_set_io(struct cx18 *cx) if (err) return err; - val = read_reg(CX18_AUDIO_ENABLE) & ~0x30; + val = cx18_read_reg(cx, CX18_AUDIO_ENABLE) & ~0x30; val |= (audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 : (audio_input << 4); - write_reg(val | 0xb00, CX18_AUDIO_ENABLE); + cx18_write_reg(cx, val | 0xb00, CX18_AUDIO_ENABLE); cx18_vapi(cx, CX18_APU_RESETAI, 1, 0); return 0; } diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 3b0a2c45060..73f5141a42d 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -22,27 +22,35 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" int cx18_av_write(struct cx18 *cx, u16 addr, u8 value) { - u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3)); + u32 reg = 0xc40000 + (addr & ~3); u32 mask = 0xff; int shift = (addr & 3) * 8; + u32 x = cx18_read_reg(cx, reg); x = (x & ~(mask << shift)) | ((u32)value << shift); - writel(x, cx->reg_mem + 0xc40000 + (addr & ~3)); + cx18_write_reg(cx, x, reg); return 0; } int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) { - writel(value, cx->reg_mem + 0xc40000 + addr); + cx18_write_reg(cx, value, 0xc40000 + addr); + return 0; +} + +int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value) +{ + cx18_write_reg_noretry(cx, value, 0xc40000 + addr); return 0; } u8 cx18_av_read(struct cx18 *cx, u16 addr) { - u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3)); + u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3)); int shift = (addr & 3) * 8; return (x >> shift) & 0xff; @@ -50,7 +58,12 @@ u8 cx18_av_read(struct cx18 *cx, u16 addr) u32 cx18_av_read4(struct cx18 *cx, u16 addr) { - return readl(cx->reg_mem + 0xc40000 + addr); + return cx18_read_reg(cx, 0xc40000 + addr); +} + +u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr) +{ + return cx18_read_reg_noretry(cx, 0xc40000 + addr); } int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask, diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index eb61fa1e096..b67d8df20cc 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -301,8 +301,10 @@ struct cx18_av_state { /* cx18_av-core.c */ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value); u8 cx18_av_read(struct cx18 *cx, u16 addr); u32 cx18_av_read4(struct cx18 *cx, u16 addr); +u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr); int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg); diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c index e996a4e3123..522a035b2e8 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -20,6 +20,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include <linux/firmware.h> #define CX18_AUDIO_ENABLE 0xc72014 @@ -49,7 +50,7 @@ int cx18_av_loadfw(struct cx18 *cx) cx18_av_write4(cx, 0x8100, 0x00010000); /* Put the 8051 in reset and enable firmware upload */ - cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000); + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000); ptr = fw->data; size = fw->size; @@ -58,22 +59,28 @@ int cx18_av_loadfw(struct cx18 *cx) u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16); u32 value = 0; int retries2; + int unrec_err = 0; - for (retries2 = 0; retries2 < 5; retries2++) { - cx18_av_write4(cx, CXADEC_DL_CTL, dl_control); + for (retries2 = 0; retries2 < CX18_MAX_MMIO_RETRIES; + retries2++) { + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, + dl_control); udelay(10); - value = cx18_av_read4(cx, CXADEC_DL_CTL); + value = cx18_av_read4_noretry(cx, + CXADEC_DL_CTL); if (value == dl_control) break; /* Check if we can correct the byte by changing the address. We can only write the lower address byte of the address. */ if ((value & 0x3F00) != (dl_control & 0x3F00)) { - retries2 = 5; + unrec_err = 1; break; } } - if (retries2 >= 5) + cx18_log_write_retries(cx, retries2, + cx->reg_mem + 0xc40000 + CXADEC_DL_CTL); + if (unrec_err || retries2 >= CX18_MAX_MMIO_RETRIES) break; } if (i == size) @@ -119,10 +126,10 @@ int cx18_av_loadfw(struct cx18 *cx) have a name in the spec. */ cx18_av_write4(cx, 0x09CC, 1); - v = read_reg(CX18_AUDIO_ENABLE); - /* If bit 11 is 1 */ + v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + /* If bit 11 is 1, clear bit 10 */ if (v & 0x800) - write_reg(v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Clear bit 10 */ + cx18_write_reg(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Enable WW auto audio standard detection */ v = cx18_av_read4(cx, CXADEC_STD_DET_CTL); diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 3cb9734ec07..5efe01ebe9d 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -292,12 +292,111 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { /* ------------------------------------------------------------------------- */ +/* Toshiba Qosmio laptop internal DVB-T/Analog Hybrid Tuner */ + +static const struct cx18_card_pci_info cx18_pci_toshiba_qosmio_dvbt[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_TOSHIBA, 0x0110 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = { + .type = CX18_CARD_TOSHIBA_QOSMIO_DVBT, + .name = "Toshiba Qosmio DVB-T/Analog", + .comment = "Experimenters and photos needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_all = CX18_HW_TUNER, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE6 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .ddr = { + .chip_config = 0x202, + .refresh = 0x3bb, + .timing1 = 0x33320a63, + .timing2 = 0x0a, + .tune_lane = 0, + .initial_emrs = 0x42, + }, + .xceive_pin = 15, + .pci_list = cx18_pci_toshiba_qosmio_dvbt, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Leadtek WinFast PVR2100 */ + +static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_leadtek_pvr2100 = { + .type = CX18_CARD_LEADTEK_PVR2100, + .name = "Leadtek WinFast PVR2100", + .comment = "Experimenters and photos needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_muxer = CX18_HW_GPIO, + .hw_all = CX18_HW_TUNER | CX18_HW_GPIO, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* + * Pointer to proper DDR config values provided by + * Terry Wu <terrywu at leadtek.com.tw> + */ + .chip_config = 0x303, + .refresh = 0x3bb, + .timing1 = 0x24220e83, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0x2, + }, + .gpio_init.initial_value = 0x6, + .gpio_init.direction = 0x7, + .gpio_audio_input = { .mask = 0x7, + .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, + .xceive_pin = 15, + .pci_list = cx18_pci_leadtek_pvr2100, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + static const struct cx18_card *cx18_card_list[] = { &cx18_card_hvr1600_esmt, &cx18_card_hvr1600_samsung, &cx18_card_h900, &cx18_card_mpc718, &cx18_card_cnxt_raptor_pal, + &cx18_card_toshiba_qosmio_dvbt, + &cx18_card_leadtek_pvr2100, }; const struct cx18_card *cx18_get_card(u16 index) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index bd18afebbf8..085121c2b47 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -4,6 +4,7 @@ * Derived from ivtv-driver.c * * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * Copyright (C) 2008 Andy Walls <awalls@radix.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,6 +23,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-version.h" #include "cx18-cards.h" #include "cx18-i2c.h" @@ -73,10 +75,14 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; - +static int mmio_ndelay[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; static unsigned cardtype_c = 1; static unsigned tuner_c = 1; static unsigned radio_c = 1; +static unsigned mmio_ndelay_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; @@ -90,15 +96,18 @@ static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS; static int cx18_pci_latency = 1; +int cx18_retry_mmio = 1; int cx18_debug; module_param_array(tuner, int, &tuner_c, 0644); module_param_array(radio, bool, &radio_c, 0644); module_param_array(cardtype, int, &cardtype_c, 0644); +module_param_array(mmio_ndelay, int, &mmio_ndelay_c, 0644); module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); module_param_named(debug, cx18_debug, int, 0644); +module_param_named(retry_mmio, cx18_retry_mmio, int, 0644); module_param(cx18_pci_latency, int, 0644); module_param(cx18_first_minor, int, 0644); @@ -121,6 +130,8 @@ MODULE_PARM_DESC(cardtype, "\t\t\t 3 = Compro VideoMate H900\n" "\t\t\t 4 = Yuan MPC718\n" "\t\t\t 5 = Conexant Raptor PAL/SECAM\n" + "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n" + "\t\t\t 7 = Leadtek WinFast PVR2100\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); @@ -140,6 +151,14 @@ MODULE_PARM_DESC(debug, MODULE_PARM_DESC(cx18_pci_latency, "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" "\t\t\tDefault: Yes"); +MODULE_PARM_DESC(retry_mmio, + "Check and retry memory mapped IO accesses\n" + "\t\t\tDefault: 1 [Yes]"); +MODULE_PARM_DESC(mmio_ndelay, + "Delay (ns) for each CX23418 memory mapped IO access.\n" + "\t\t\tTry larger values that are close to a multiple of the\n" + "\t\t\tPCI clock period, 30.3 ns, if your card doesn't work.\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_MMIO_NDELAY)); MODULE_PARM_DESC(enc_mpg_buffers, "Encoder MPG Buffers (in MB)\n" "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS)); @@ -156,7 +175,7 @@ MODULE_PARM_DESC(enc_pcm_buffers, "Encoder PCM buffers (in MB)\n" "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS)); -MODULE_PARM_DESC(cx18_first_minor, "Set minor assigned to first card"); +MODULE_PARM_DESC(cx18_first_minor, "Set kernel number assigned to first card"); MODULE_AUTHOR("Hans Verkuil"); MODULE_DESCRIPTION("CX23418 driver"); @@ -356,6 +375,11 @@ static void cx18_process_options(struct cx18 *cx) cx->options.tuner = tuner[cx->num]; cx->options.radio = radio[cx->num]; + if (mmio_ndelay[cx->num] < 0) + cx->options.mmio_ndelay = CX18_DEFAULT_MMIO_NDELAY; + else + cx->options.mmio_ndelay = mmio_ndelay[cx->num]; + cx->std = cx18_parse_std(cx); if (cx->options.cardtype == -1) { CX18_INFO("Ignore card\n"); @@ -395,9 +419,9 @@ done: if (cx->card == NULL) { cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); - CX18_ERR("Unknown card: vendor/device: %04x/%04x\n", + CX18_ERR("Unknown card: vendor/device: [%04x:%04x]\n", cx->dev->vendor, cx->dev->device); - CX18_ERR(" subsystem vendor/device: %04x/%04x\n", + CX18_ERR(" subsystem vendor/device: [%04x:%04x]\n", cx->dev->subsystem_vendor, cx->dev->subsystem_device); CX18_ERR("Defaulting to %s card\n", cx->card->name); CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); @@ -511,9 +535,9 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *dev, return -EIO; } - /* Check for bus mastering */ + /* Enable bus mastering and memory mapped IO for the CX23418 */ pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, cmd); pci_read_config_byte(dev, PCI_CLASS_REVISION, &cx->card_rev); @@ -525,11 +549,6 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *dev, pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency); } - /* This config space value relates to DMA latencies. The - default value 0x8080 is too low however and will lead - to DMA errors. 0xffff is the max value which solves - these problems. */ - pci_write_config_dword(dev, 0x40, 0xffff); CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " "irq: %d, latency: %d, memory: 0x%lx\n", @@ -656,7 +675,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, goto free_mem; } cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET; - devtype = read_reg(0xC72028); + devtype = cx18_read_reg(cx, 0xC72028); switch (devtype & 0xff000000) { case 0xff000000: CX18_INFO("cx23418 revision %08x (A)\n", devtype); @@ -815,6 +834,7 @@ err: if (retval == 0) retval = -ENODEV; CX18_ERR("Error %d on initialization\n", retval); + cx18_log_statistics(cx); kfree(cx18_cards[cx18_cards_active]); cx18_cards[cx18_cards_active] = NULL; @@ -902,8 +922,8 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_stop_all_captures(cx); /* Interrupts */ - sw1_irq_disable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); - sw2_irq_disable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); cx18_halt_firmware(cx); @@ -919,6 +939,7 @@ static void cx18_remove(struct pci_dev *pci_dev) pci_disable_device(cx->dev); + cx18_log_statistics(cx); CX18_INFO("Removed %s, card #%d\n", cx->card_name, cx->num); } @@ -938,7 +959,7 @@ static int module_start(void) /* Validate parameters */ if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) { - printk(KERN_ERR "cx18: Exiting, ivtv_first_minor must be between 0 and %d\n", + printk(KERN_ERR "cx18: Exiting, cx18_first_minor must be between 0 and %d\n", CX18_MAX_CARDS - 1); return -1; } diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 4801bc7fb5b..fa8be0731a3 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -38,7 +38,6 @@ #include <linux/i2c-algo-bit.h> #include <linux/list.h> #include <linux/unistd.h> -#include <linux/byteorder/swab.h> #include <linux/pagemap.h> #include <linux/workqueue.h> #include <linux/mutex.h> @@ -64,6 +63,9 @@ # error "This driver requires kernel PCI support." #endif +/* Default delay to throttle mmio access to the CX23418 */ +#define CX18_DEFAULT_MMIO_NDELAY 0 /* 0 ns = 0 PCI clock(s) / 33 MHz */ + #define CX18_MEM_OFFSET 0x00000000 #define CX18_MEM_SIZE 0x04000000 #define CX18_REG_OFFSET 0x02000000 @@ -77,7 +79,9 @@ #define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */ #define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ #define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */ -#define CX18_CARD_LAST 4 +#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/ +#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */ +#define CX18_CARD_LAST 6 #define CX18_ENC_STREAM_TYPE_MPG 0 #define CX18_ENC_STREAM_TYPE_TS 1 @@ -97,6 +101,8 @@ #define CX18_PCI_ID_COMPRO 0x185b #define CX18_PCI_ID_YUAN 0x12ab #define CX18_PCI_ID_CONEXANT 0x14f1 +#define CX18_PCI_ID_TOSHIBA 0x1179 +#define CX18_PCI_ID_LEADTEK 0x107D /* ======================================================================== */ /* ========================== START USER SETTABLE DMA VARIABLES =========== */ @@ -169,6 +175,7 @@ #define CX18_MAX_PGM_INDEX (400) +extern int cx18_retry_mmio; /* enable check & retry of mmio accesses */ extern int cx18_debug; @@ -177,6 +184,7 @@ struct cx18_options { int cardtype; /* force card type on load */ int tuner; /* set tuner on load */ int radio; /* enable/disable radio */ + unsigned long mmio_ndelay; /* delay in ns after every PCI mmio access */ }; /* per-buffer bit flags */ @@ -216,8 +224,7 @@ struct cx18_buffer { struct cx18_queue { struct list_head list; - u32 buffers; - u32 length; + atomic_t buffers; u32 bytesused; }; @@ -237,6 +244,8 @@ struct cx18_dvb { struct cx18; /* forward reference */ struct cx18_scb; /* forward reference */ +#define CX18_INVALID_TASK_HANDLE 0xffffffff + struct cx18_stream { /* These first four fields are always set, even if the stream is not actually created. */ @@ -259,7 +268,6 @@ struct cx18_stream { /* Buffer Stats */ u32 buffers; u32 buf_size; - u32 buffers_stolen; /* Buffer Queues */ struct cx18_queue q_free; /* free buffers */ @@ -341,6 +349,13 @@ struct cx18_i2c_algo_callback_data { int bus_index; /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */ }; +#define CX18_MAX_MMIO_RETRIES 10 + +struct cx18_mmio_stats { + atomic_t retried_write[CX18_MAX_MMIO_RETRIES+1]; + atomic_t retried_read[CX18_MAX_MMIO_RETRIES+1]; +}; + /* Struct to hold info about cx18 cards */ struct cx18 { int num; /* board number, -1 during init! */ @@ -430,6 +445,9 @@ struct cx18 { u32 gpio_val; struct mutex gpio_lock; + /* Statistics */ + struct cx18_mmio_stats mmio_stats; + /* v4l2 and User settings */ /* codec settings */ @@ -458,47 +476,4 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv); /* First-open initialization: load firmware, etc. */ int cx18_init_on_first_open(struct cx18 *cx); -/* This is a PCI post thing, where if the pci register is not read, then - the write doesn't always take effect right away. By reading back the - register any pending PCI writes will be performed (in order), and so - you can be sure that the writes are guaranteed to be done. - - Rarely needed, only in some timing sensitive cases. - Apparently if this is not done some motherboards seem - to kill the firmware and get into the broken state until computer is - rebooted. */ -#define write_sync(val, reg) \ - do { writel(val, reg); readl(reg); } while (0) - -#define read_reg(reg) readl(cx->reg_mem + (reg)) -#define write_reg(val, reg) writel(val, cx->reg_mem + (reg)) -#define write_reg_sync(val, reg) \ - do { write_reg(val, reg); read_reg(reg); } while (0) - -#define read_enc(addr) readl(cx->enc_mem + (u32)(addr)) -#define write_enc(val, addr) writel(val, cx->enc_mem + (u32)(addr)) -#define write_enc_sync(val, addr) \ - do { write_enc(val, addr); read_enc(addr); } while (0) - -#define sw1_irq_enable(val) do { \ - write_reg(val, SW1_INT_STATUS); \ - write_reg(read_reg(SW1_INT_ENABLE_PCI) | (val), SW1_INT_ENABLE_PCI); \ -} while (0) - -#define sw1_irq_disable(val) \ - write_reg(read_reg(SW1_INT_ENABLE_PCI) & ~(val), SW1_INT_ENABLE_PCI); - -#define sw2_irq_enable(val) do { \ - write_reg(val, SW2_INT_STATUS); \ - write_reg(read_reg(SW2_INT_ENABLE_PCI) | (val), SW2_INT_ENABLE_PCI); \ -} while (0) - -#define sw2_irq_disable(val) \ - write_reg(read_reg(SW2_INT_ENABLE_PCI) & ~(val), SW2_INT_ENABLE_PCI); - -#define setup_page(addr) do { \ - u32 val = read_reg(0xD000F8) & ~0x1f00; \ - write_reg(val | (((addr) >> 17) & 0x1f00), 0xD000F8); \ -} while (0) - #endif /* CX18_DRIVER_H */ diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index 1e420a804fc..afc694e7bdb 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -21,6 +21,7 @@ #include "cx18-version.h" #include "cx18-dvb.h" +#include "cx18-io.h" #include "cx18-streams.h" #include "cx18-cards.h" #include "s5h1409.h" @@ -87,13 +88,13 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) switch (cx->card->type) { case CX18_CARD_HVR_1600_ESMT: case CX18_CARD_HVR_1600_SAMSUNG: - v = read_reg(CX18_REG_DMUX_NUM_PORT_0_CONTROL); + v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL); v |= 0x00400000; /* Serial Mode */ v |= 0x00002000; /* Data Length - Byte */ v |= 0x00010000; /* Error - Polarity */ v |= 0x00020000; /* Error - Passthru */ v |= 0x000c0000; /* Error - Ignore */ - write_reg(v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); + cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); break; default: diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 1e537fe04a2..5f908990754 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -132,6 +132,7 @@ static void cx18_dualwatch(struct cx18 *cx) u16 new_stereo_mode; const u16 stereo_mask = 0x0300; const u16 dual = 0x0200; + u32 h; new_stereo_mode = cx->params.audio_properties & stereo_mask; memset(&vt, 0, sizeof(vt)); @@ -143,13 +144,21 @@ static void cx18_dualwatch(struct cx18 *cx) if (new_stereo_mode == cx->dualwatch_stereo_mode) return; - new_bitmap = new_stereo_mode | (cx->params.audio_properties & ~stereo_mask); + new_bitmap = new_stereo_mode + | (cx->params.audio_properties & ~stereo_mask); - CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. new audio_bitmask=0x%ux\n", - cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap); + CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. " + "new audio_bitmask=0x%ux\n", + cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap); - if (cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2, - cx18_find_handle(cx), new_bitmap) == 0) { + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_DEBUG_INFO("dualwatch: can't find valid task handle\n"); + return; + } + + if (cx18_vapi(cx, + CX18_CPU_SET_AUDIO_PARAMETERS, 2, h, new_bitmap) == 0) { cx->dualwatch_stereo_mode = new_stereo_mode; return; } @@ -223,7 +232,7 @@ static struct cx18_buffer *cx18_get_buffer(struct cx18_stream *s, int non_block, prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE); /* New buffers might have become available before we were added to the waitqueue */ - if (!s->q_full.buffers) + if (!atomic_read(&s->q_full.buffers)) schedule(); finish_wait(&s->waitq, &wait); if (signal_pending(current)) { @@ -509,7 +518,7 @@ unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) CX18_DEBUG_HI_FILE("Encoder poll\n"); poll_wait(filp, &s->waitq, wait); - if (s->q_full.length || s->q_io.length) + if (atomic_read(&s->q_full.buffers) || atomic_read(&s->q_io.buffers)) return POLLIN | POLLRDNORM; if (eof) return POLLHUP; @@ -695,20 +704,28 @@ int cx18_v4l2_open(struct inode *inode, struct file *filp) void cx18_mute(struct cx18 *cx) { - if (atomic_read(&cx->ana_capturing)) - cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, - cx18_find_handle(cx), 1); + u32 h; + if (atomic_read(&cx->ana_capturing)) { + h = cx18_find_handle(cx); + if (h != CX18_INVALID_TASK_HANDLE) + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 1); + else + CX18_ERR("Can't find valid task handle for mute\n"); + } CX18_DEBUG_INFO("Mute\n"); } void cx18_unmute(struct cx18 *cx) { + u32 h; if (atomic_read(&cx->ana_capturing)) { - cx18_msleep_timeout(100, 0); - cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, - cx18_find_handle(cx), 12); - cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, - cx18_find_handle(cx), 0); + h = cx18_find_handle(cx); + if (h != CX18_INVALID_TASK_HANDLE) { + cx18_msleep_timeout(100, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, h, 12); + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 0); + } else + CX18_ERR("Can't find valid task handle for unmute\n"); } CX18_DEBUG_INFO("Unmute\n"); } diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c index 78fadd2ada5..51534428cd0 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -20,6 +20,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-scb.h" #include "cx18-irq.h" #include "cx18-firmware.h" @@ -113,11 +114,11 @@ static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx) src = (const u32 *)fw->data; for (i = 0; i < fw->size; i += 4096) { - setup_page(i); + cx18_setup_page(cx, i); for (j = i; j < fw->size && j < i + 4096; j += 4) { /* no need for endianness conversion on the ppc */ - __raw_writel(*src, dst); - if (__raw_readl(dst) != *src) { + cx18_raw_writel(cx, *src, dst); + if (cx18_raw_readl(cx, dst) != *src) { CX18_ERR("Mismatch at offset %x\n", i); release_firmware(fw); return -EIO; @@ -170,12 +171,15 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx) if (offset + seghdr.size > sz) break; for (i = 0; i < seghdr.size; i += 4096) { - setup_page(offset + i); + cx18_setup_page(cx, offset + i); for (j = i; j < seghdr.size && j < i + 4096; j += 4) { /* no need for endianness conversion on the ppc */ - __raw_writel(src[(offset + j) / 4], dst + seghdr.addr + j); - if (__raw_readl(dst + seghdr.addr + j) != src[(offset + j) / 4]) { - CX18_ERR("Mismatch at offset %x\n", offset + j); + cx18_raw_writel(cx, src[(offset + j) / 4], + dst + seghdr.addr + j); + if (cx18_raw_readl(cx, dst + seghdr.addr + j) + != src[(offset + j) / 4]) { + CX18_ERR("Mismatch at offset %x\n", + offset + j); release_firmware(fw); return -EIO; } @@ -189,43 +193,45 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx) size = fw->size; release_firmware(fw); /* Clear bit0 for APU to start from 0 */ - write_reg(read_reg(0xc72030) & ~1, 0xc72030); + cx18_write_reg(cx, cx18_read_reg(cx, 0xc72030) & ~1, 0xc72030); return size; } void cx18_halt_firmware(struct cx18 *cx) { CX18_DEBUG_INFO("Preparing for firmware halt.\n"); - write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ - write_reg(0x00020002, CX18_ADEC_CONTROL); + cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + cx18_write_reg(cx, 0x00020002, CX18_ADEC_CONTROL); } void cx18_init_power(struct cx18 *cx, int lowpwr) { /* power-down Spare and AOM PLLs */ /* power-up fast, slow and mpeg PLLs */ - write_reg(0x00000008, CX18_PLL_POWER_DOWN); + cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN); /* ADEC out of sleep */ - write_reg(0x00020000, CX18_ADEC_CONTROL); + cx18_write_reg(cx, 0x00020000, CX18_ADEC_CONTROL); /* The fast clock is at 200/245 MHz */ - write_reg(lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); - write_reg(lowpwr ? 0x1EFBF37 : 0x038E3D7, CX18_FAST_CLOCK_PLL_FRAC); + cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); + cx18_write_reg(cx, lowpwr ? 0x1EFBF37 : 0x038E3D7, + CX18_FAST_CLOCK_PLL_FRAC); - write_reg(2, CX18_FAST_CLOCK_PLL_POST); - write_reg(1, CX18_FAST_CLOCK_PLL_PRESCALE); - write_reg(4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH); + cx18_write_reg(cx, 2, CX18_FAST_CLOCK_PLL_POST); + cx18_write_reg(cx, 1, CX18_FAST_CLOCK_PLL_PRESCALE); + cx18_write_reg(cx, 4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH); /* set slow clock to 125/120 MHz */ - write_reg(lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT); - write_reg(lowpwr ? 0xEBAF05 : 0x18618A8, CX18_SLOW_CLOCK_PLL_FRAC); - write_reg(4, CX18_SLOW_CLOCK_PLL_POST); + cx18_write_reg(cx, lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT); + cx18_write_reg(cx, lowpwr ? 0xEBAF05 : 0x18618A8, + CX18_SLOW_CLOCK_PLL_FRAC); + cx18_write_reg(cx, 4, CX18_SLOW_CLOCK_PLL_POST); /* mpeg clock pll 54MHz */ - write_reg(0xF, CX18_MPEG_CLOCK_PLL_INT); - write_reg(0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC); - write_reg(8, CX18_MPEG_CLOCK_PLL_POST); + cx18_write_reg(cx, 0xF, CX18_MPEG_CLOCK_PLL_INT); + cx18_write_reg(cx, 0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC); + cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST); /* Defaults */ /* APU = SC or SC/2 = 125/62.5 */ @@ -242,81 +248,84 @@ void cx18_init_power(struct cx18 *cx, int lowpwr) /* VFC = disabled */ /* USB = disabled */ - write_reg(lowpwr ? 0xFFFF0020 : 0x00060004, CX18_CLOCK_SELECT1); - write_reg(lowpwr ? 0xFFFF0004 : 0x00060006, CX18_CLOCK_SELECT2); + cx18_write_reg(cx, lowpwr ? 0xFFFF0020 : 0x00060004, + CX18_CLOCK_SELECT1); + cx18_write_reg(cx, lowpwr ? 0xFFFF0004 : 0x00060006, + CX18_CLOCK_SELECT2); - write_reg(0xFFFF0002, CX18_HALF_CLOCK_SELECT1); - write_reg(0xFFFF0104, CX18_HALF_CLOCK_SELECT2); + cx18_write_reg(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1); + cx18_write_reg(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2); - write_reg(0xFFFF9026, CX18_CLOCK_ENABLE1); - write_reg(0xFFFF3105, CX18_CLOCK_ENABLE2); + cx18_write_reg(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1); + cx18_write_reg(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2); } void cx18_init_memory(struct cx18 *cx) { cx18_msleep_timeout(10, 0); - write_reg(0x10000, CX18_DDR_SOFT_RESET); + cx18_write_reg(cx, 0x10000, CX18_DDR_SOFT_RESET); cx18_msleep_timeout(10, 0); - write_reg(cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); + cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); cx18_msleep_timeout(10, 0); - write_reg(cx->card->ddr.refresh, CX18_DDR_REFRESH); - write_reg(cx->card->ddr.timing1, CX18_DDR_TIMING1); - write_reg(cx->card->ddr.timing2, CX18_DDR_TIMING2); + cx18_write_reg(cx, cx->card->ddr.refresh, CX18_DDR_REFRESH); + cx18_write_reg(cx, cx->card->ddr.timing1, CX18_DDR_TIMING1); + cx18_write_reg(cx, cx->card->ddr.timing2, CX18_DDR_TIMING2); cx18_msleep_timeout(10, 0); /* Initialize DQS pad time */ - write_reg(cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE); - write_reg(cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS); + cx18_write_reg(cx, cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE); + cx18_write_reg(cx, cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS); cx18_msleep_timeout(10, 0); - write_reg(0x20000, CX18_DDR_SOFT_RESET); + cx18_write_reg(cx, 0x20000, CX18_DDR_SOFT_RESET); cx18_msleep_timeout(10, 0); /* use power-down mode when idle */ - write_reg(0x00000010, CX18_DDR_POWER_REG); - - write_reg(0x10001, CX18_REG_BUS_TIMEOUT_EN); - - write_reg(0x48, CX18_DDR_MB_PER_ROW_7); - write_reg(0xE0000, CX18_DDR_BASE_63_ADDR); - - write_reg(0x00000101, CX18_WMB_CLIENT02); /* AO */ - write_reg(0x00000101, CX18_WMB_CLIENT09); /* AI2 */ - write_reg(0x00000101, CX18_WMB_CLIENT05); /* VIM1 */ - write_reg(0x00000101, CX18_WMB_CLIENT06); /* AI1 */ - write_reg(0x00000101, CX18_WMB_CLIENT07); /* 3D comb */ - write_reg(0x00000101, CX18_WMB_CLIENT10); /* ME */ - write_reg(0x00000101, CX18_WMB_CLIENT12); /* ENC */ - write_reg(0x00000101, CX18_WMB_CLIENT13); /* PK */ - write_reg(0x00000101, CX18_WMB_CLIENT11); /* RC */ - write_reg(0x00000101, CX18_WMB_CLIENT14); /* AVO */ + cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG); + + cx18_write_reg(cx, 0x10001, CX18_REG_BUS_TIMEOUT_EN); + + cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7); + cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR); + + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT02); /* AO */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT09); /* AI2 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT05); /* VIM1 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT06); /* AI1 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT07); /* 3D comb */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT10); /* ME */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT12); /* ENC */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT13); /* PK */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT11); /* RC */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14); /* AVO */ } int cx18_firmware_init(struct cx18 *cx) { /* Allow chip to control CLKRUN */ - write_reg(0x5, CX18_DSP0_INTERRUPT_MASK); + cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK); - write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ cx18_msleep_timeout(1, 0); - sw1_irq_enable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); - sw2_irq_enable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); /* Only if the processor is not running */ - if (read_reg(CX18_PROC_SOFT_RESET) & 8) { + if (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 8) { int sz = load_apu_fw_direct("v4l-cx23418-apu.fw", cx->enc_mem, cx); - write_enc(0xE51FF004, 0); - write_enc(0xa00000, 4); /* todo: not hardcoded */ - write_reg(0x00010000, CX18_PROC_SOFT_RESET); /* Start APU */ + cx18_write_enc(cx, 0xE51FF004, 0); + cx18_write_enc(cx, 0xa00000, 4); /* todo: not hardcoded */ + /* Start APU */ + cx18_write_reg(cx, 0x00010000, CX18_PROC_SOFT_RESET); cx18_msleep_timeout(500, 0); sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw", @@ -326,9 +335,10 @@ int cx18_firmware_init(struct cx18 *cx) int retries = 0; /* start the CPU */ - write_reg(0x00080000, CX18_PROC_SOFT_RESET); + cx18_write_reg(cx, 0x00080000, CX18_PROC_SOFT_RESET); while (retries++ < 50) { /* Loop for max 500mS */ - if ((read_reg(CX18_PROC_SOFT_RESET) & 1) == 0) + if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET) + & 1) == 0) break; cx18_msleep_timeout(10, 0); } @@ -342,6 +352,6 @@ int cx18_firmware_init(struct cx18 *cx) return -EIO; } /* initialize GPIO */ - write_reg(0x14001400, 0xC78110); + cx18_write_reg(cx, 0x14001400, 0xC78110); return 0; } diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 3d495dba498..0e560421989 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-cards.h" #include "cx18-gpio.h" #include "tuner-xc2028.h" @@ -49,11 +50,11 @@ static void gpio_write(struct cx18 *cx) u32 dir = cx->gpio_dir; u32 val = cx->gpio_val; - write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - write_reg(((dir & 0xffff) << 16) | (val & 0xffff), + cx18_write_reg(cx, (dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + cx18_write_reg(cx, ((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); - write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), + cx18_write_reg(cx, dir & 0xffff0000, CX18_REG_GPIO_DIR2); + cx18_write_reg_sync(cx, (dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } @@ -141,15 +142,17 @@ void cx18_gpio_init(struct cx18 *cx) } CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", - read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), - read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); + cx18_read_reg(cx, CX18_REG_GPIO_DIR1), + cx18_read_reg(cx, CX18_REG_GPIO_DIR2), + cx18_read_reg(cx, CX18_REG_GPIO_OUT1), + cx18_read_reg(cx, CX18_REG_GPIO_OUT2)); gpio_write(cx); mutex_unlock(&cx->gpio_lock); } /* Xceive tuner reset function */ -int cx18_reset_tuner_gpio(void *dev, int cmd, int value) +int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value) { struct i2c_algo_bit_data *algo = dev; struct cx18_i2c_algo_callback_data *cb_data = algo->data; diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h index 22cd7ddf855..beb7424b994 100644 --- a/drivers/media/video/cx18/cx18-gpio.h +++ b/drivers/media/video/cx18/cx18-gpio.h @@ -23,5 +23,5 @@ void cx18_gpio_init(struct cx18 *cx); void cx18_reset_i2c_slaves_gpio(struct cx18 *cx); void cx18_reset_ir_gpio(void *data); -int cx18_reset_tuner_gpio(void *dev, int cmd, int value); +int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value); int cx18_gpio(struct cx18 *cx, unsigned int command, void *arg); diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index 6023ba3bd3a..aa09e557b19 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -22,13 +22,12 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-cards.h" #include "cx18-gpio.h" #include "cx18-av-core.h" #include "cx18-i2c.h" -#include <media/ir-kbd-i2c.h> - #define CX18_REG_I2C_1_WR 0xf15000 #define CX18_REG_I2C_1_RD 0xf15008 #define CX18_REG_I2C_2_WR 0xf25100 @@ -158,12 +157,12 @@ static void cx18_setscl(void *data, int state) struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; - u32 r = read_reg(addr); + u32 r = cx18_read_reg(cx, addr); if (state) - write_reg_sync(r | SETSCL_BIT, addr); + cx18_write_reg_sync(cx, r | SETSCL_BIT, addr); else - write_reg_sync(r & ~SETSCL_BIT, addr); + cx18_write_reg_sync(cx, r & ~SETSCL_BIT, addr); } static void cx18_setsda(void *data, int state) @@ -171,12 +170,12 @@ static void cx18_setsda(void *data, int state) struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; - u32 r = read_reg(addr); + u32 r = cx18_read_reg(cx, addr); if (state) - write_reg_sync(r | SETSDL_BIT, addr); + cx18_write_reg_sync(cx, r | SETSDL_BIT, addr); else - write_reg_sync(r & ~SETSDL_BIT, addr); + cx18_write_reg_sync(cx, r & ~SETSDL_BIT, addr); } static int cx18_getscl(void *data) @@ -185,7 +184,7 @@ static int cx18_getscl(void *data) int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; - return read_reg(addr) & GETSCL_BIT; + return cx18_read_reg(cx, addr) & GETSCL_BIT; } static int cx18_getsda(void *data) @@ -194,7 +193,7 @@ static int cx18_getsda(void *data) int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; - return read_reg(addr) & GETSDL_BIT; + return cx18_read_reg(cx, addr) & GETSDL_BIT; } /* template for i2c-bit-algo */ @@ -394,29 +393,33 @@ int init_cx18_i2c(struct cx18 *cx) cx->i2c_adap[i].dev.parent = &cx->dev->dev; } - if (read_reg(CX18_REG_I2C_2_WR) != 0x0003c02f) { + if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) { /* Reset/Unreset I2C hardware block */ - write_reg(0x10000000, 0xc71004); /* Clock select 220MHz */ - write_reg_sync(0x10001000, 0xc71024); /* Clock Enable */ + /* Clock select 220MHz */ + cx18_write_reg(cx, 0x10000000, 0xc71004); + /* Clock Enable */ + cx18_write_reg_sync(cx, 0x10001000, 0xc71024); } /* courtesy of Steven Toth <stoth@hauppauge.com> */ - write_reg_sync(0x00c00000, 0xc7001c); + cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c); mdelay(10); - write_reg_sync(0x00c000c0, 0xc7001c); + cx18_write_reg_sync(cx, 0x00c000c0, 0xc7001c); mdelay(10); - write_reg_sync(0x00c00000, 0xc7001c); + cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c); mdelay(10); - write_reg_sync(0x00c00000, 0xc730c8); /* Set to edge-triggered intrs. */ - write_reg_sync(0x00c00000, 0xc730c4); /* Clear any stale intrs */ + /* Set to edge-triggered intrs. */ + cx18_write_reg_sync(cx, 0x00c00000, 0xc730c8); + /* Clear any stale intrs */ + cx18_write_reg_sync(cx, 0x00c00000, 0xc730c4); /* Hw I2C1 Clock Freq ~100kHz */ - write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_1_WR); + cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR); cx18_setscl(&cx->i2c_algo_cb_data[0], 1); cx18_setsda(&cx->i2c_algo_cb_data[0], 1); /* Hw I2C2 Clock Freq ~100kHz */ - write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_2_WR); + cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR); cx18_setscl(&cx->i2c_algo_cb_data[1], 1); cx18_setsda(&cx->i2c_algo_cb_data[1], 1); @@ -430,8 +433,10 @@ void exit_cx18_i2c(struct cx18 *cx) { int i; CX18_DEBUG_I2C("i2c exit\n"); - write_reg(read_reg(CX18_REG_I2C_1_WR) | 4, CX18_REG_I2C_1_WR); - write_reg(read_reg(CX18_REG_I2C_2_WR) | 4, CX18_REG_I2C_2_WR); + cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_1_WR) | 4, + CX18_REG_I2C_1_WR); + cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_2_WR) | 4, + CX18_REG_I2C_2_WR); for (i = 0; i < 2; i++) { i2c_del_adapter(&cx->i2c_adap[i]); diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c new file mode 100644 index 00000000000..700ab9439c1 --- /dev/null +++ b/drivers/media/video/cx18/cx18-io.c @@ -0,0 +1,254 @@ +/* + * cx18 driver PCI memory mapped IO access routines + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * Copyright (C) 2008 Andy Walls <awalls@radix.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-io.h" +#include "cx18-irq.h" + +void cx18_log_statistics(struct cx18 *cx) +{ + int i; + + if (!(cx18_debug & CX18_DBGFLG_INFO)) + return; + + for (i = 0; i <= CX18_MAX_MMIO_RETRIES; i++) + CX18_DEBUG_INFO("retried_write[%d] = %d\n", i, + atomic_read(&cx->mmio_stats.retried_write[i])); + for (i = 0; i <= CX18_MAX_MMIO_RETRIES; i++) + CX18_DEBUG_INFO("retried_read[%d] = %d\n", i, + atomic_read(&cx->mmio_stats.retried_read[i])); + return; +} + +void cx18_raw_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_raw_writel_noretry(cx, val, addr); + if (val == cx18_raw_readl_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +u32 cx18_raw_readl_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u32 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_raw_readl_noretry(cx, addr); + if (val != 0xffffffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +u16 cx18_raw_readw_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u16 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_raw_readw_noretry(cx, addr); + if (val != 0xffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + if (val == cx18_readl_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writew_noretry(cx, val, addr); + if (val == cx18_readw_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +void cx18_writeb_retry(struct cx18 *cx, u8 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writeb_noretry(cx, val, addr); + if (val == cx18_readb_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +u32 cx18_readl_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u32 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_readl_noretry(cx, addr); + if (val != 0xffffffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +u16 cx18_readw_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u16 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_readw_noretry(cx, addr); + if (val != 0xffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +u8 cx18_readb_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u8 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_readb_noretry(cx, addr); + if (val != 0xff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +void cx18_memcpy_fromio(struct cx18 *cx, void *to, + const void __iomem *from, unsigned int len) +{ + const u8 __iomem *src = from; + u8 *dst = to; + + /* Align reads on the CX23418's addresses */ + if ((len > 0) && ((unsigned long) src & 1)) { + *dst = cx18_readb(cx, src); + len--; + dst++; + src++; + } + if ((len > 1) && ((unsigned long) src & 2)) { + *((u16 *)dst) = cx18_raw_readw(cx, src); + len -= 2; + dst += 2; + src += 2; + } + while (len > 3) { + *((u32 *)dst) = cx18_raw_readl(cx, src); + len -= 4; + dst += 4; + src += 4; + } + if (len > 1) { + *((u16 *)dst) = cx18_raw_readw(cx, src); + len -= 2; + dst += 2; + src += 2; + } + if (len > 0) + *dst = cx18_readb(cx, src); +} + +void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) +{ + u8 __iomem *dst = addr; + u16 val2 = val | (val << 8); + u32 val4 = val2 | (val2 << 16); + + /* Align writes on the CX23418's addresses */ + if ((count > 0) && ((unsigned long)dst & 1)) { + cx18_writeb(cx, (u8) val, dst); + count--; + dst++; + } + if ((count > 1) && ((unsigned long)dst & 2)) { + cx18_writew(cx, val2, dst); + count -= 2; + dst += 2; + } + while (count > 3) { + cx18_writel(cx, val4, dst); + count -= 4; + dst += 4; + } + if (count > 1) { + cx18_writew(cx, val2, dst); + count -= 2; + dst += 2; + } + if (count > 0) + cx18_writeb(cx, (u8) val, dst); +} + +void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) +{ + u32 r; + cx18_write_reg(cx, val, SW1_INT_STATUS); + r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); + cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); +} + +void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) +{ + u32 r; + r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); + cx18_write_reg(cx, r & ~val, SW1_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) +{ + u32 r; + cx18_write_reg(cx, val, SW2_INT_STATUS); + r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); + cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_disable(struct cx18 *cx, u32 val) +{ + u32 r; + r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); + cx18_write_reg(cx, r & ~val, SW2_INT_ENABLE_PCI); +} + +void cx18_setup_page(struct cx18 *cx, u32 addr) +{ + u32 val; + val = cx18_read_reg(cx, 0xD000F8); + val = (val & ~0x1f00) | ((addr >> 17) & 0x1f00); + cx18_write_reg(cx, val, 0xD000F8); +} diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h new file mode 100644 index 00000000000..197d4fbd9f9 --- /dev/null +++ b/drivers/media/video/cx18/cx18-io.h @@ -0,0 +1,378 @@ +/* + * cx18 driver PCI memory mapped IO access routines + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * Copyright (C) 2008 Andy Walls <awalls@radix.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_IO_H +#define CX18_IO_H + +#include "cx18-driver.h" + +static inline void cx18_io_delay(struct cx18 *cx) +{ + if (cx->options.mmio_ndelay) + ndelay(cx->options.mmio_ndelay); +} + +/* + * Readback and retry of MMIO access for reliability: + * The concept was suggested by Steve Toth <stoth@linuxtv.org>. + * The implmentation is the fault of Andy Walls <awalls@radix.net>. + */ + +/* Statistics gathering */ +static inline +void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr) +{ + if (i > CX18_MAX_MMIO_RETRIES) + i = CX18_MAX_MMIO_RETRIES; + atomic_inc(&cx->mmio_stats.retried_write[i]); + return; +} + +static inline +void cx18_log_read_retries(struct cx18 *cx, int i, const void *addr) +{ + if (i > CX18_MAX_MMIO_RETRIES) + i = CX18_MAX_MMIO_RETRIES; + atomic_inc(&cx->mmio_stats.retried_read[i]); + return; +} + +void cx18_log_statistics(struct cx18 *cx); + +/* Non byteswapping memory mapped IO */ +static inline +void cx18_raw_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + __raw_writel(val, addr); + cx18_io_delay(cx); +} + +void cx18_raw_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr); + +static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_raw_writel_retry(cx, val, addr); + else + cx18_raw_writel_noretry(cx, val, addr); +} + + +static inline +u32 cx18_raw_readl_noretry(struct cx18 *cx, const void __iomem *addr) +{ + u32 ret = __raw_readl(addr); + cx18_io_delay(cx); + return ret; +} + +u32 cx18_raw_readl_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_raw_readl_retry(cx, addr); + + return cx18_raw_readl_noretry(cx, addr); +} + + +static inline +u16 cx18_raw_readw_noretry(struct cx18 *cx, const void __iomem *addr) +{ + u16 ret = __raw_readw(addr); + cx18_io_delay(cx); + return ret; +} + +u16 cx18_raw_readw_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u16 cx18_raw_readw(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_raw_readw_retry(cx, addr); + + return cx18_raw_readw_noretry(cx, addr); +} + + +/* Normal memory mapped IO */ +static inline +void cx18_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + writel(val, addr); + cx18_io_delay(cx); +} + +void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr); + +static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_writel_retry(cx, val, addr); + else + cx18_writel_noretry(cx, val, addr); +} + + +static inline +void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr) +{ + writew(val, addr); + cx18_io_delay(cx); +} + +void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr); + +static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_writew_retry(cx, val, addr); + else + cx18_writew_noretry(cx, val, addr); +} + + +static inline +void cx18_writeb_noretry(struct cx18 *cx, u8 val, void __iomem *addr) +{ + writeb(val, addr); + cx18_io_delay(cx); +} + +void cx18_writeb_retry(struct cx18 *cx, u8 val, void __iomem *addr); + +static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_writeb_retry(cx, val, addr); + else + cx18_writeb_noretry(cx, val, addr); +} + + +static inline u32 cx18_readl_noretry(struct cx18 *cx, const void __iomem *addr) +{ + u32 ret = readl(addr); + cx18_io_delay(cx); + return ret; +} + +u32 cx18_readl_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_readl_retry(cx, addr); + + return cx18_readl_noretry(cx, addr); +} + + +static inline u16 cx18_readw_noretry(struct cx18 *cx, const void __iomem *addr) +{ + u16 ret = readw(addr); + cx18_io_delay(cx); + return ret; +} + +u16 cx18_readw_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u16 cx18_readw(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_readw_retry(cx, addr); + + return cx18_readw_noretry(cx, addr); +} + + +static inline u8 cx18_readb_noretry(struct cx18 *cx, const void __iomem *addr) +{ + u8 ret = readb(addr); + cx18_io_delay(cx); + return ret; +} + +u8 cx18_readb_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_readb_retry(cx, addr); + + return cx18_readb_noretry(cx, addr); +} + + +static inline +u32 cx18_write_sync_noretry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + cx18_writel_noretry(cx, val, addr); + return cx18_readl_noretry(cx, addr); +} + +static inline +u32 cx18_write_sync_retry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + cx18_writel_retry(cx, val, addr); + return cx18_readl_retry(cx, addr); +} + +static inline u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_write_sync_retry(cx, val, addr); + + return cx18_write_sync_noretry(cx, val, addr); +} + + +void cx18_memcpy_fromio(struct cx18 *cx, void *to, + const void __iomem *from, unsigned int len); +void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count); + + +/* Access "register" region of CX23418 memory mapped I/O */ +static inline void cx18_write_reg_noretry(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel_noretry(cx, val, cx->reg_mem + reg); +} + +static inline void cx18_write_reg_retry(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel_retry(cx, val, cx->reg_mem + reg); +} + +static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) +{ + if (cx18_retry_mmio) + cx18_write_reg_retry(cx, val, reg); + else + cx18_write_reg_noretry(cx, val, reg); +} + + +static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg) +{ + return cx18_readl_noretry(cx, cx->reg_mem + reg); +} + +static inline u32 cx18_read_reg_retry(struct cx18 *cx, u32 reg) +{ + return cx18_readl_retry(cx, cx->reg_mem + reg); +} + +static inline u32 cx18_read_reg(struct cx18 *cx, u32 reg) +{ + if (cx18_retry_mmio) + return cx18_read_reg_retry(cx, reg); + + return cx18_read_reg_noretry(cx, reg); +} + + +static inline u32 cx18_write_reg_sync_noretry(struct cx18 *cx, u32 val, u32 reg) +{ + return cx18_write_sync_noretry(cx, val, cx->reg_mem + reg); +} + +static inline u32 cx18_write_reg_sync_retry(struct cx18 *cx, u32 val, u32 reg) +{ + return cx18_write_sync_retry(cx, val, cx->reg_mem + reg); +} + +static inline u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg) +{ + if (cx18_retry_mmio) + return cx18_write_reg_sync_retry(cx, val, reg); + + return cx18_write_reg_sync_noretry(cx, val, reg); +} + + +/* Access "encoder memory" region of CX23418 memory mapped I/O */ +static inline void cx18_write_enc_noretry(struct cx18 *cx, u32 val, u32 addr) +{ + cx18_writel_noretry(cx, val, cx->enc_mem + addr); +} + +static inline void cx18_write_enc_retry(struct cx18 *cx, u32 val, u32 addr) +{ + cx18_writel_retry(cx, val, cx->enc_mem + addr); +} + +static inline void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr) +{ + if (cx18_retry_mmio) + cx18_write_enc_retry(cx, val, addr); + else + cx18_write_enc_noretry(cx, val, addr); +} + + +static inline u32 cx18_read_enc_noretry(struct cx18 *cx, u32 addr) +{ + return cx18_readl_noretry(cx, cx->enc_mem + addr); +} + +static inline u32 cx18_read_enc_retry(struct cx18 *cx, u32 addr) +{ + return cx18_readl_retry(cx, cx->enc_mem + addr); +} + +static inline u32 cx18_read_enc(struct cx18 *cx, u32 addr) +{ + if (cx18_retry_mmio) + return cx18_read_enc_retry(cx, addr); + + return cx18_read_enc_noretry(cx, addr); +} + +static inline +u32 cx18_write_enc_sync_noretry(struct cx18 *cx, u32 val, u32 addr) +{ + return cx18_write_sync_noretry(cx, val, cx->enc_mem + addr); +} + +static inline +u32 cx18_write_enc_sync_retry(struct cx18 *cx, u32 val, u32 addr) +{ + return cx18_write_sync_retry(cx, val, cx->enc_mem + addr); +} + +static inline +u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr) +{ + if (cx18_retry_mmio) + return cx18_write_enc_sync_retry(cx, val, addr); + + return cx18_write_enc_sync_noretry(cx, val, addr); +} + +void cx18_sw1_irq_enable(struct cx18 *cx, u32 val); +void cx18_sw1_irq_disable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_enable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_disable(struct cx18 *cx, u32 val); +void cx18_setup_page(struct cx18 *cx, u32 addr); + +#endif /* CX18_IO_H */ diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index a7f839631d6..f0ca50f5fdd 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-version.h" #include "cx18-mailbox.h" #include "cx18-i2c.h" @@ -170,7 +171,6 @@ static int cx18_try_fmt_vid_cap(struct file *file, void *fh, { struct cx18_open_id *id = fh; struct cx18 *cx = id->cx; - int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; @@ -202,8 +202,7 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, struct cx18_open_id *id = fh; struct cx18 *cx = id->cx; int ret; - int w = fmt->fmt.pix.width; - int h = fmt->fmt.pix.height; + int w, h; ret = v4l2_prio_check(&cx->prio, &id->prio); if (ret) @@ -212,6 +211,8 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, ret = cx18_try_fmt_vid_cap(file, fh, fmt); if (ret) return ret; + w = fmt->fmt.pix.width; + h = fmt->fmt.pix.height; if (cx->params.width == w && cx->params.height == h) return 0; @@ -286,9 +287,9 @@ static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg) spin_lock_irqsave(&cx18_cards_lock, flags); if (cmd == VIDIOC_DBG_G_REGISTER) - regs->val = read_enc(regs->reg); + regs->val = cx18_read_enc(cx, regs->reg); else - write_enc(regs->val, regs->reg); + cx18_write_enc(cx, regs->val, regs->reg); spin_unlock_irqrestore(&cx18_cards_lock, flags); return 0; } @@ -345,7 +346,7 @@ static int cx18_querycap(struct file *file, void *fh, strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); - strlcpy(vcap->bus_info, pci_name(cx->dev), sizeof(vcap->bus_info)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(cx->dev)); vcap->version = CX18_DRIVER_VERSION; /* version */ vcap->capabilities = cx->v4l2_cap; /* capabilities */ return 0; @@ -622,6 +623,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, { struct cx18_open_id *id = fh; struct cx18 *cx = id->cx; + u32 h; switch (enc->cmd) { case V4L2_ENC_CMD_START: @@ -643,8 +645,14 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return -EPERM; if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_ERR("Can't find valid task handle for " + "V4L2_ENC_CMD_PAUSE\n"); + return -EBADFD; + } cx18_mute(cx); - cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, cx18_find_handle(cx)); + cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, h); break; case V4L2_ENC_CMD_RESUME: @@ -654,7 +662,13 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return -EPERM; if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; - cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, cx18_find_handle(cx)); + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_ERR("Can't find valid task handle for " + "V4L2_ENC_CMD_RESUME\n"); + return -EBADFD; + } + cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h); cx18_unmute(cx); break; @@ -731,12 +745,14 @@ static int cx18_log_status(struct file *file, void *fh) continue; CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n", s->name, s->s_flags, - (s->buffers - s->q_free.buffers) * 100 / s->buffers, + (s->buffers - atomic_read(&s->q_free.buffers)) + * 100 / s->buffers, (s->buffers * s->buf_size) / 1024, s->buffers); } CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", (long long)cx->mpg_data_received, (long long)cx->vbi_data_inserted); + cx18_log_statistics(cx); CX18_INFO("================== END STATUS CARD #%d ==================\n", cx->num); return 0; } diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index ab218315c84..360330f5463 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -20,6 +20,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-firmware.h" #include "cx18-fileops.h" #include "cx18-queue.h" @@ -48,8 +49,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) break; } if (i == CX18_MAX_STREAMS) { - CX18_WARN("DMA done for unknown handle %d for stream %s\n", - handle, s->name); + CX18_WARN("Got DMA done notification for unknown/inactive" + " handle %d\n", handle); mb->error = CXERR_NOT_OPEN; mb->cmd = 0; cx18_mb_ack(cx, mb); @@ -60,8 +61,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) if (mb->args[2] != 1) CX18_WARN("Ack struct = %d for %s\n", mb->args[2], s->name); - id = read_enc(off); - buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4)); + id = cx18_read_enc(cx, off); + buf = cx18_queue_get_buf_irq(s, id, cx18_read_enc(cx, off + 4)); CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id); if (buf) { cx18_buf_sync_for_cpu(s, buf); @@ -81,7 +82,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); } else { CX18_WARN("Could not find buf %d for stream %s\n", - read_enc(off), s->name); + cx18_read_enc(cx, off), s->name); } mb->error = 0; mb->cmd = 0; @@ -97,8 +98,8 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb) char *p; if (mb->args[1]) { - setup_page(mb->args[1]); - memcpy_fromio(str, cx->enc_mem + mb->args[1], 252); + cx18_setup_page(cx, mb->args[1]); + cx18_memcpy_fromio(cx, str, cx->enc_mem + mb->args[1], 252); str[252] = 0; } cx18_mb_ack(cx, mb); @@ -113,7 +114,7 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1) struct cx18_mailbox mb; if (sw1 & IRQ_CPU_TO_EPU) { - memcpy_fromio(&mb, &cx->scb->cpu2epu_mb, sizeof(mb)); + cx18_memcpy_fromio(cx, &mb, &cx->scb->cpu2epu_mb, sizeof(mb)); mb.error = 0; switch (mb.cmd) { @@ -141,16 +142,16 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) spin_lock(&cx->dma_reg_lock); - hw2_mask = read_reg(HW2_INT_MASK5_PCI); - hw2 = read_reg(HW2_INT_CLR_STATUS) & hw2_mask; - sw2_mask = read_reg(SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; - sw2 = read_reg(SW2_INT_STATUS) & sw2_mask; - sw1_mask = read_reg(SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; - sw1 = read_reg(SW1_INT_STATUS) & sw1_mask; + hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); + hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; + sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; + sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - write_reg(sw2&sw2_mask, SW2_INT_STATUS); - write_reg(sw1&sw1_mask, SW1_INT_STATUS); - write_reg(hw2&hw2_mask, HW2_INT_CLR_STATUS); + cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS); + cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS); + cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); @@ -161,15 +162,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) */ if (sw2) { - if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) | - readl(&cx->scb->cpu2epu_irq_ack))) + if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) | + cx18_readl(cx, &cx->scb->cpu2epu_irq_ack))) wake_up(&cx->mb_cpu_waitq); - if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) | - readl(&cx->scb->apu2epu_irq_ack))) + if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) | + cx18_readl(cx, &cx->scb->apu2epu_irq_ack))) wake_up(&cx->mb_apu_waitq); - if (sw2 & readl(&cx->scb->epu2hpu_irq_ack)) + if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack)) wake_up(&cx->mb_epu_waitq); - if (sw2 & readl(&cx->scb->hpu2epu_irq_ack)) + if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack)) wake_up(&cx->mb_hpu_waitq); } diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 93177514e84..9d18dd22de7 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -22,6 +22,7 @@ #include <stdarg.h> #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-scb.h" #include "cx18-irq.h" #include "cx18-mailbox.h" @@ -82,6 +83,7 @@ static const struct cx18_api_info api_info[] = { API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST), + API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, 0), API_ENTRY(0, 0, 0), }; @@ -105,20 +107,20 @@ static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu switch (rpu) { case APU: mb = &cx->scb->epu2apu_mb; - *state = readl(&cx->scb->apu_state); - *irq = readl(&cx->scb->epu2apu_irq); + *state = cx18_readl(cx, &cx->scb->apu_state); + *irq = cx18_readl(cx, &cx->scb->epu2apu_irq); break; case CPU: mb = &cx->scb->epu2cpu_mb; - *state = readl(&cx->scb->cpu_state); - *irq = readl(&cx->scb->epu2cpu_irq); + *state = cx18_readl(cx, &cx->scb->cpu_state); + *irq = cx18_readl(cx, &cx->scb->epu2cpu_irq); break; case HPU: mb = &cx->scb->epu2hpu_mb; - *state = readl(&cx->scb->hpu_state); - *irq = readl(&cx->scb->epu2hpu_irq); + *state = cx18_readl(cx, &cx->scb->hpu_state); + *irq = cx18_readl(cx, &cx->scb->epu2hpu_irq); break; } @@ -126,8 +128,8 @@ static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu return mb; do { - *req = readl(&mb->request); - ack = readl(&mb->ack); + *req = cx18_readl(cx, &mb->request); + ack = cx18_readl(cx, &mb->ack); wait_count++; } while (*req != ack && wait_count < 600); @@ -172,9 +174,9 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) return -EINVAL; } - setup_page(SCB_OFFSET); - write_sync(mb->request, &ack_mb->ack); - write_reg(ack_irq, SW2_INT_SET); + cx18_setup_page(cx, SCB_OFFSET); + cx18_write_sync(cx, mb->request, &ack_mb->ack); + cx18_write_reg(cx, ack_irq, SW2_INT_SET); return 0; } @@ -199,7 +201,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) CX18_DEBUG_HI_API("%s\n", info->name); else CX18_DEBUG_API("%s\n", info->name); - setup_page(SCB_OFFSET); + cx18_setup_page(cx, SCB_OFFSET); mb = cx18_mb_is_complete(cx, info->rpu, &state, &irq, &req); if (mb == NULL) { @@ -208,11 +210,11 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } oldreq = req - 1; - writel(cmd, &mb->cmd); + cx18_writel(cx, cmd, &mb->cmd); for (i = 0; i < args; i++) - writel(data[i], &mb->args[i]); - writel(0, &mb->error); - writel(req, &mb->request); + cx18_writel(cx, data[i], &mb->args[i]); + cx18_writel(cx, 0, &mb->error); + cx18_writel(cx, req, &mb->request); switch (info->rpu) { case APU: waitq = &cx->mb_apu_waitq; break; @@ -223,9 +225,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - write_reg(irq, SW1_INT_SET); + cx18_write_reg(cx, irq, SW1_INT_SET); - while (!sig && readl(&mb->ack) != readl(&mb->request) && cnt < 660) { + while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) + && cnt < 660) { if (cnt > 200 && !in_atomic()) sig = cx18_msleep_timeout(10, 1); cnt++; @@ -233,13 +236,13 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) if (sig) return -EINTR; if (cnt == 660) { - writel(oldreq, &mb->request); + cx18_writel(cx, oldreq, &mb->request); CX18_ERR("mb %s failed\n", info->name); return -EINVAL; } for (i = 0; i < MAX_MB_ARGUMENTS; i++) - data[i] = readl(&mb->args[i]); - err = readl(&mb->error); + data[i] = cx18_readl(cx, &mb->args[i]); + err = cx18_readl(cx, &mb->error); if (!in_atomic() && (info->flags & API_SLOW)) cx18_msleep_timeout(300, 0); if (err) diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index dbe792ac300..a33ba04a268 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -37,8 +37,7 @@ void cx18_buf_swap(struct cx18_buffer *buf) void cx18_queue_init(struct cx18_queue *q) { INIT_LIST_HEAD(&q->list); - q->buffers = 0; - q->length = 0; + atomic_set(&q->buffers, 0); q->bytesused = 0; } @@ -55,8 +54,7 @@ void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf, } spin_lock_irqsave(&s->qlock, flags); list_add_tail(&buf->list, &q->list); - q->buffers++; - q->length += s->buf_size; + atomic_inc(&q->buffers); q->bytesused += buf->bytesused - buf->readpos; spin_unlock_irqrestore(&s->qlock, flags); } @@ -70,8 +68,7 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) if (!list_empty(&q->list)) { buf = list_entry(q->list.next, struct cx18_buffer, list); list_del_init(q->list.next); - q->buffers--; - q->length -= s->buf_size; + atomic_dec(&q->buffers); q->bytesused -= buf->bytesused - buf->readpos; } spin_unlock_irqrestore(&s->qlock, flags); @@ -95,10 +92,8 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, /* the transport buffers are handled differently, they are not moved to the full queue */ if (s->type != CX18_ENC_STREAM_TYPE_TS) { - s->q_free.buffers--; - s->q_free.length -= s->buf_size; - s->q_full.buffers++; - s->q_full.length += s->buf_size; + atomic_dec(&s->q_free.buffers); + atomic_inc(&s->q_full.buffers); s->q_full.bytesused += buf->bytesused; list_move_tail(&buf->list, &s->q_full.list); } @@ -124,8 +119,7 @@ static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q) buf = list_entry(q->list.next, struct cx18_buffer, list); list_move_tail(q->list.next, &s->q_free.list); buf->bytesused = buf->readpos = buf->b_flags = 0; - s->q_free.buffers++; - s->q_free.length += s->buf_size; + atomic_inc(&s->q_free.buffers); } cx18_queue_init(q); spin_unlock_irqrestore(&s->qlock, flags); diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c index 30bc803e30d..f56d3772aa6 100644 --- a/drivers/media/video/cx18/cx18-scb.c +++ b/drivers/media/video/cx18/cx18-scb.c @@ -20,102 +20,103 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-scb.h" void cx18_init_scb(struct cx18 *cx) { - setup_page(SCB_OFFSET); - memset_io(cx->scb, 0, 0x10000); + cx18_setup_page(cx, SCB_OFFSET); + cx18_memset_io(cx, cx->scb, 0, 0x10000); - writel(IRQ_APU_TO_CPU, &cx->scb->apu2cpu_irq); - writel(IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack); - writel(IRQ_HPU_TO_CPU, &cx->scb->hpu2cpu_irq); - writel(IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack); - writel(IRQ_PPU_TO_CPU, &cx->scb->ppu2cpu_irq); - writel(IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack); - writel(IRQ_EPU_TO_CPU, &cx->scb->epu2cpu_irq); - writel(IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_CPU, &cx->scb->apu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_CPU, &cx->scb->hpu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_CPU, &cx->scb->ppu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_CPU, &cx->scb->epu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack); - writel(IRQ_CPU_TO_APU, &cx->scb->cpu2apu_irq); - writel(IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack); - writel(IRQ_HPU_TO_APU, &cx->scb->hpu2apu_irq); - writel(IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack); - writel(IRQ_PPU_TO_APU, &cx->scb->ppu2apu_irq); - writel(IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack); - writel(IRQ_EPU_TO_APU, &cx->scb->epu2apu_irq); - writel(IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_APU, &cx->scb->cpu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_APU, &cx->scb->hpu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_APU, &cx->scb->ppu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_APU, &cx->scb->epu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack); - writel(IRQ_CPU_TO_HPU, &cx->scb->cpu2hpu_irq); - writel(IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack); - writel(IRQ_APU_TO_HPU, &cx->scb->apu2hpu_irq); - writel(IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack); - writel(IRQ_PPU_TO_HPU, &cx->scb->ppu2hpu_irq); - writel(IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack); - writel(IRQ_EPU_TO_HPU, &cx->scb->epu2hpu_irq); - writel(IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_HPU, &cx->scb->cpu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_HPU, &cx->scb->apu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_HPU, &cx->scb->ppu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_HPU, &cx->scb->epu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack); - writel(IRQ_CPU_TO_PPU, &cx->scb->cpu2ppu_irq); - writel(IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack); - writel(IRQ_APU_TO_PPU, &cx->scb->apu2ppu_irq); - writel(IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack); - writel(IRQ_HPU_TO_PPU, &cx->scb->hpu2ppu_irq); - writel(IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack); - writel(IRQ_EPU_TO_PPU, &cx->scb->epu2ppu_irq); - writel(IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_PPU, &cx->scb->cpu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_PPU, &cx->scb->apu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_PPU, &cx->scb->hpu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_PPU, &cx->scb->epu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack); - writel(IRQ_CPU_TO_EPU, &cx->scb->cpu2epu_irq); - writel(IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack); - writel(IRQ_APU_TO_EPU, &cx->scb->apu2epu_irq); - writel(IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack); - writel(IRQ_HPU_TO_EPU, &cx->scb->hpu2epu_irq); - writel(IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack); - writel(IRQ_PPU_TO_EPU, &cx->scb->ppu2epu_irq); - writel(IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_EPU, &cx->scb->cpu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_EPU, &cx->scb->apu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_EPU, &cx->scb->hpu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_EPU, &cx->scb->ppu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb), &cx->scb->apu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb), &cx->scb->hpu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb), &cx->scb->ppu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb), &cx->scb->epu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb), &cx->scb->cpu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb), &cx->scb->hpu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb), &cx->scb->ppu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb), &cx->scb->epu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb), &cx->scb->cpu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb), &cx->scb->apu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb), &cx->scb->ppu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb), &cx->scb->epu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb), &cx->scb->cpu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb), &cx->scb->apu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb), &cx->scb->hpu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb), &cx->scb->epu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb), &cx->scb->cpu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb), &cx->scb->apu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb), &cx->scb->hpu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb), &cx->scb->ppu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu_state), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu_state), &cx->scb->ipc_offset); - writel(1, &cx->scb->hpu_state); - writel(1, &cx->scb->epu_state); + cx18_writel(cx, 1, &cx->scb->hpu_state); + cx18_writel(cx, 1, &cx->scb->epu_state); } diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 0da57f583bf..0c8e7542cf6 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-fileops.h" #include "cx18-mailbox.h" #include "cx18-i2c.h" @@ -56,7 +57,7 @@ static struct file_operations cx18_v4l2_enc_fops = { static struct { const char *name; int vfl_type; - int minor_offset; + int num_offset; int dma; enum v4l2_buf_type buf_type; struct file_operations *fops; @@ -119,7 +120,7 @@ static void cx18_stream_init(struct cx18 *cx, int type) s->cx = cx; s->type = type; s->name = cx18_stream_info[type].name; - s->handle = 0xffffffff; + s->handle = CX18_INVALID_TASK_HANDLE; s->dma = cx18_stream_info[type].dma; s->buf_size = cx->stream_buf_size[type]; @@ -143,8 +144,8 @@ static int cx18_prep_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; u32 cap = cx->v4l2_cap; - int minor_offset = cx18_stream_info[type].minor_offset; - int minor; + int num_offset = cx18_stream_info[type].num_offset; + int num = cx->num + cx18_first_minor + num_offset; /* These four fields are always initialized. If v4l2dev == NULL, then this stream is not in use. In that case no other fields but these @@ -163,9 +164,6 @@ static int cx18_prep_dev(struct cx18 *cx, int type) !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE))) return 0; - /* card number + user defined offset + device offset */ - minor = cx->num + cx18_first_minor + minor_offset; - /* User explicitly selected 0 buffers for these streams, so don't create them. */ if (cx18_stream_info[type].dma != PCI_DMA_NONE && @@ -176,7 +174,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) cx18_stream_init(cx, type); - if (minor_offset == -1) + if (num_offset == -1) return 0; /* allocate and initialize the v4l2 video device structure */ @@ -190,7 +188,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "cx18-%d", cx->num); - s->v4l2dev->minor = minor; + s->v4l2dev->num = num; s->v4l2dev->parent = &cx->dev->dev; s->v4l2dev->fops = cx18_stream_info[type].fops; s->v4l2dev->release = video_device_release; @@ -226,7 +224,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; int vfl_type = cx18_stream_info[type].vfl_type; - int minor; + int num; /* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something? * We need a VFL_TYPE_TS defined. @@ -244,38 +242,44 @@ static int cx18_reg_dev(struct cx18 *cx, int type) if (s->v4l2dev == NULL) return 0; - minor = s->v4l2dev->minor; + num = s->v4l2dev->num; + /* card number + user defined offset + device offset */ + if (type != CX18_ENC_STREAM_TYPE_MPG) { + struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; + + if (s_mpg->v4l2dev) + num = s_mpg->v4l2dev->num + cx18_stream_info[type].num_offset; + } /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->v4l2dev, vfl_type, minor) && - video_register_device(s->v4l2dev, vfl_type, -1)) { - CX18_ERR("Couldn't register v4l2 device for %s minor %d\n", - s->name, minor); + if (video_register_device(s->v4l2dev, vfl_type, num)) { + CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n", + s->name, num); video_device_release(s->v4l2dev); s->v4l2dev = NULL; return -ENOMEM; } - minor = s->v4l2dev->minor; + num = s->v4l2dev->num; switch (vfl_type) { case VFL_TYPE_GRABBER: CX18_INFO("Registered device video%d for %s (%d MB)\n", - minor, s->name, cx->options.megabytes[type]); + num, s->name, cx->options.megabytes[type]); break; case VFL_TYPE_RADIO: CX18_INFO("Registered device radio%d for %s\n", - minor - MINOR_VFL_TYPE_RADIO_MIN, s->name); + num, s->name); break; case VFL_TYPE_VBI: if (cx->options.megabytes[type]) CX18_INFO("Registered device vbi%d for %s (%d MB)\n", - minor - MINOR_VFL_TYPE_VBI_MIN, + num, s->name, cx->options.megabytes[type]); else CX18_INFO("Registered device vbi%d for %s\n", - minor - MINOR_VFL_TYPE_VBI_MIN, s->name); + num, s->name); break; } @@ -432,7 +436,6 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) default: return -EINVAL; } - s->buffers_stolen = 0; /* mute/unmute video */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, @@ -470,7 +473,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) if (atomic_read(&cx->tot_capturing) == 0) { clear_bit(CX18_F_I_EOS, &cx->i_flags); - write_reg(7, CX18_DSP0_INTERRUPT_MASK); + cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK); } cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, @@ -480,8 +483,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) list_for_each(p, &s->q_free.list) { struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); - writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); - writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length); + cx18_writel(cx, buf->dma_handle, + &cx->scb->cpu_mdl[buf->id].paddr); + cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, buf->id, s->buf_size); @@ -489,7 +493,14 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { CX18_DEBUG_WARN("Error starting capture!\n"); + /* Ensure we're really not capturing before releasing MDLs */ + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1); + else + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); + /* FIXME - clean-up DSP0_INT mask, i_flags, s_flags, etc. */ return -EINVAL; } @@ -541,6 +552,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } + /* Tell the CX23418 it can't use our buffers anymore */ + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); + if (s->type != CX18_ENC_STREAM_TYPE_TS) atomic_dec(&cx->ana_capturing); atomic_dec(&cx->tot_capturing); @@ -549,12 +563,12 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) clear_bit(CX18_F_S_STREAMING, &s->s_flags); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); - s->handle = 0xffffffff; + s->handle = CX18_INVALID_TASK_HANDLE; if (atomic_read(&cx->tot_capturing) > 0) return 0; - write_reg(5, CX18_DSP0_INTERRUPT_MASK); + cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); wake_up(&s->waitq); return 0; @@ -568,8 +582,8 @@ u32 cx18_find_handle(struct cx18 *cx) for (i = 0; i < CX18_MAX_STREAMS; i++) { struct cx18_stream *s = &cx->streams[i]; - if (s->v4l2dev && s->handle) + if (s->v4l2dev && (s->handle != CX18_INVALID_TASK_HANDLE)) return s->handle; } - return 0; + return CX18_INVALID_TASK_HANDLE; } diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h index d5c7a6f968d..9f6be2d457f 100644 --- a/drivers/media/video/cx18/cx18-version.h +++ b/drivers/media/video/cx18/cx18-version.h @@ -25,7 +25,7 @@ #define CX18_DRIVER_NAME "cx18" #define CX18_DRIVER_VERSION_MAJOR 1 #define CX18_DRIVER_VERSION_MINOR 0 -#define CX18_DRIVER_VERSION_PATCHLEVEL 0 +#define CX18_DRIVER_VERSION_PATCHLEVEL 1 #define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL) #define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \ diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h index e7ed053059a..668f968d776 100644 --- a/drivers/media/video/cx18/cx23418.h +++ b/drivers/media/video/cx18/cx23418.h @@ -351,7 +351,7 @@ Descriptor Lists to the driver IN[0] - Task handle. Handle of the task to start ReturnCode - One of the ERR_DE_... */ -/* #define CX18_CPU_DE_ReleaseMDL (CPU_CMD_MASK_DE | 0x0006) */ +#define CX18_CPU_DE_RELEASE_MDL (CPU_CMD_MASK_DE | 0x0006) /* Description: This command signals the cpu that the dat buffer has been consumed and ready for re-use. diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c index 22847a0444f..cbbe47fb87b 100644 --- a/drivers/media/video/cx2341x.c +++ b/drivers/media/video/cx2341x.c @@ -508,7 +508,10 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, /* this setting is read-only for the cx2341x since the V4L2_CID_MPEG_STREAM_TYPE really determines the MPEG-1/2 setting */ - err = v4l2_ctrl_query_fill_std(qctrl); + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ENCODING_MPEG_1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); if (err == 0) qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; return err; diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index e60bd31b51a..8c1b7fa47a4 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -15,6 +15,7 @@ config VIDEO_CX23885 select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 7b0e8c01692..395c11fa47c 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -36,7 +36,6 @@ #include <media/cx2341x.h> #include "cx23885.h" -#include "media/cx2341x.h" #define CX23885_FIRM_IMAGE_SIZE 376836 #define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" @@ -632,7 +631,7 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) /* ------------------------------------------------------------------ */ /* MPEG encoder API */ -char *cmd_to_str(int cmd) +static char *cmd_to_str(int cmd) { switch (cmd) { case CX2341X_ENC_PING_FW: @@ -1583,6 +1582,7 @@ static int mpeg_open(struct inode *inode, struct file *file) dprintk(2, "%s()\n", __func__); + lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); if (h->v4l_device->minor == minor) { @@ -1591,13 +1591,17 @@ static int mpeg_open(struct inode *inode, struct file *file) } } - if (dev == NULL) + if (dev == NULL) { + unlock_kernel(); return -ENODEV; + } /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; @@ -1608,6 +1612,7 @@ static int mpeg_open(struct inode *inode, struct file *file) V4L2_FIELD_INTERLACED, sizeof(struct cx23885_buffer), fh); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index c36d3f63210..dac5ccc9ba7 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -26,6 +26,7 @@ #include <media/cx25840.h> #include "cx23885.h" +#include "tuner-xc2028.h" /* ------------------------------------------------------------------ */ /* board config info */ @@ -38,16 +39,16 @@ struct cx23885_board cx23885_boards[] = { .input = {{ .type = CX23885_VMUX_COMPOSITE1, .vmux = 0, - },{ + }, { .type = CX23885_VMUX_COMPOSITE2, .vmux = 1, - },{ + }, { .type = CX23885_VMUX_COMPOSITE3, .vmux = 2, - },{ + }, { .type = CX23885_VMUX_COMPOSITE4, .vmux = 3, - }}, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = { .name = "Hauppauge WinTV-HVR1800lp", @@ -56,19 +57,19 @@ struct cx23885_board cx23885_boards[] = { .type = CX23885_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xff00, - },{ + }, { .type = CX23885_VMUX_DEBUG, .vmux = 0, .gpio0 = 0xff01, - },{ + }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xff02, - },{ + }, { .type = CX23885_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xff02, - }}, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1800] = { .name = "Hauppauge WinTV-HVR1800", @@ -83,20 +84,20 @@ struct cx23885_board cx23885_boards[] = { CX25840_VIN5_CH2 | CX25840_VIN2_CH1, .gpio0 = 0, - },{ + }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = CX25840_VIN7_CH3 | CX25840_VIN4_CH2 | CX25840_VIN6_CH1, .gpio0 = 0, - },{ + }, { .type = CX23885_VMUX_SVIDEO, .vmux = CX25840_VIN7_CH3 | CX25840_VIN4_CH2 | CX25840_VIN8_CH1 | CX25840_SVIDEO_ON, .gpio0 = 0, - }}, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1250] = { .name = "Hauppauge WinTV-HVR1250", @@ -105,19 +106,19 @@ struct cx23885_board cx23885_boards[] = { .type = CX23885_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xff00, - },{ + }, { .type = CX23885_VMUX_DEBUG, .vmux = 0, .gpio0 = 0xff01, - },{ + }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xff02, - },{ + }, { .type = CX23885_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xff02, - }}, + } }, }, [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = { .name = "DViCO FusionHDTV5 Express", @@ -148,6 +149,15 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = { + .name = "DViCO FusionHDTV DVB-T Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = { + .name = "Leadtek Winfast PxDVR3200 H", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -159,43 +169,43 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x3400, .card = CX23885_BOARD_UNKNOWN, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7600, .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7800, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7801, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7809, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7911, .card = CX23885_BOARD_HAUPPAUGE_HVR1250, - },{ + }, { .subvendor = 0x18ac, .subdevice = 0xd500, .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7790, .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7797, .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7710, .card = CX23885_BOARD_HAUPPAUGE_HVR1500, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7717, .card = CX23885_BOARD_HAUPPAUGE_HVR1500, @@ -215,10 +225,18 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x8010, .card = CX23885_BOARD_HAUPPAUGE_HVR1400, - },{ + }, { .subvendor = 0x18ac, .subdevice = 0xd618, .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdb78, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, + }, { + .subvendor = 0x107d, + .subdevice = 0x6681, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -229,23 +247,25 @@ void cx23885_card_list(struct cx23885_dev *dev) if (0 == dev->pci->subsystem_vendor && 0 == dev->pci->subsystem_device) { - printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n" - "%s: be autodetected. Please pass card=<n> insmod option to\n" - "%s: workaround that. Redirect complaints to the vendor of\n" - "%s: the TV card. Best regards,\n" + printk(KERN_INFO + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card=<n> insmod option\n" + "%s: to workaround that. Redirect complaints to the\n" + "%s: vendor of the TV card. Best regards,\n" "%s: -- tux\n", dev->name, dev->name, dev->name, dev->name, dev->name); } else { - printk("%s: Your board isn't known (yet) to the driver. You can\n" - "%s: try to pick one of the existing card configs via\n" + printk(KERN_INFO + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" "%s: card=<n> insmod option. Updating to the latest\n" "%s: version might help as well.\n", dev->name, dev->name, dev->name, dev->name); } - printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n", + printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n", dev->name); for (i = 0; i < cx23885_bcount; i++) - printk("%s: card=%d -> %s\n", + printk(KERN_INFO "%s: card=%d -> %s\n", dev->name, i, cx23885_boards[i].name); } @@ -253,11 +273,11 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); /* Make sure we support the board model */ - switch (tv.model) - { + switch (tv.model) { case 71009: /* WinTV-HVR1200 (PCIe, Retail, full height) * DVB-T and basic analog */ @@ -285,21 +305,51 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 71999: /* WinTV-HVR1200 (PCIe, OEM, full height) * DVB-T and basic analog */ - case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */ - case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */ - case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ - case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */ - case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */ - case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */ - case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */ - case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ - case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ - case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ + case 76601: + /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual + channel ATSC and MPEG2 HW Encoder */ + case 77001: + /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC + and Basic analog */ + case 77011: + /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC + and Basic analog */ + case 77041: + /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM + and Basic analog */ + case 77051: + /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM + and Basic analog */ + case 78011: + /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78501: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78521: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78531: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78631: + /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 79001: + /* WinTV-HVR1250 (PCIe, Retail, IR, full height, + ATSC and Basic analog */ + case 79101: + /* WinTV-HVR1250 (PCIe, Retail, IR, half height, + ATSC and Basic analog */ + case 79561: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ + case 79571: + /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, + ATSC and Basic analog */ + case 79671: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ case 80019: /* WinTV-HVR1400 (Express Card, Retail, IR, * DVB-T and Basic analog */ @@ -311,7 +361,8 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) * DVB-T and MPEG2 HW Encoder */ break; default: - printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model); + printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", + dev->name, tv.model); break; } @@ -319,37 +370,37 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } -/* Tuner callback function for cx23885 boards. Currently only needed - * for HVR1500Q, which has an xc5000 tuner. - */ -int cx23885_tuner_callback(void *priv, int command, int arg) +int cx23885_tuner_callback(void *priv, int component, int command, int arg) { - struct cx23885_i2c *bus = priv; - struct cx23885_dev *dev = bus->dev; + struct cx23885_tsport *port = priv; + struct cx23885_dev *dev = port->dev; u32 bitmask = 0; + if (command == XC2028_RESET_CLK) + return 0; + if (command != 0) { printk(KERN_ERR "%s(): Unknown command 0x%x.\n", __func__, command); return -EINVAL; } - switch(dev->board) { + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: - /* Tuner Reset Command from xc5000 */ - if (command == 0) - bitmask = 0x04; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + /* Tuner Reset Command */ + bitmask = 0x04; break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: - if (command == 0) { - - /* Two identical tuners on two different i2c buses, - * we need to reset the correct gpio. */ - if (bus->nr == 0) - bitmask = 0x01; - else if (bus->nr == 1) - bitmask = 0x04; - } + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* Two identical tuners on two different i2c buses, + * we need to reset the correct gpio. */ + if (port->nr == 0) + bitmask = 0x01; + else if (port->nr == 1) + bitmask = 0x04; break; } @@ -365,7 +416,7 @@ int cx23885_tuner_callback(void *priv, int command, int arg) void cx23885_gpio_setup(struct cx23885_dev *dev) { - switch(dev->board) { + switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: /* GPIO-0 cx24227 demodulator reset */ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ @@ -465,6 +516,32 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx_set(GP0_IO, 0x000f000f); break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* GPIO-0 portb xc3028 reset */ + /* GPIO-1 portb zl10353 reset */ + /* GPIO-2 portc xc3028 reset */ + /* GPIO-3 portc zl10353 reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + /* GPIO-2 xc3028 tuner reset */ + + /* The following GPIO's are on the internal AVCore (cx25840) */ + /* GPIO-? zl10353 demod reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00040000); + mdelay(20); + cx_clear(GP0_IO, 0x00000004); + mdelay(20); + cx_set(GP0_IO, 0x00040004); + break; } } @@ -479,6 +556,9 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1400: /* FIXME: Implement me */ break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + request_module("ir-kbd-i2c"); + break; } return 0; @@ -516,6 +596,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) switch (dev->board) { case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; @@ -548,6 +629,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ @@ -561,16 +643,10 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: request_module("cx25840"); break; } } /* ------------------------------------------------------------------ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 25fb0993874..8f6fb2add7d 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -37,12 +37,12 @@ MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); MODULE_LICENSE("GPL"); static unsigned int debug; -module_param(debug,int,0644); -MODULE_PARM_DESC(debug,"enable debug messages"); +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card,"card type"); +MODULE_PARM_DESC(card, "card type"); #define dprintk(level, fmt, arg...)\ do { if (debug >= level)\ @@ -364,13 +364,12 @@ void cx23885_wakeup(struct cx23885_tsport *port, list_del(&buf->vb.queue); wake_up(&buf->vb.done); } - if (list_empty(&q->active)) { + if (list_empty(&q->active)) del_timer(&q->timeout); - } else { + else mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); - } if (bc != 1) - printk("%s: %d buffers handled (should be 1)\n", + printk(KERN_WARNING "%s: %d buffers handled (should be 1)\n", __func__, bc); } @@ -381,8 +380,7 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, unsigned int i, lines; u32 cdt; - if (ch->cmds_start == 0) - { + if (ch->cmds_start == 0) { dprintk(1, "%s() Erasing channel [%s]\n", __func__, ch->name); cx_write(ch->ptr1_reg, 0); @@ -418,15 +416,15 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, /* write CMDS */ if (ch->jumponly) - cx_write(ch->cmds_start + 0, 8); + cx_write(ch->cmds_start + 0, 8); else - cx_write(ch->cmds_start + 0, risc); + cx_write(ch->cmds_start + 0, risc); cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ cx_write(ch->cmds_start + 8, cdt); cx_write(ch->cmds_start + 12, (lines*16) >> 3); cx_write(ch->cmds_start + 16, ch->ctrl_start); if (ch->jumponly) - cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2) ); + cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); else cx_write(ch->cmds_start + 20, 64 >> 2); for (i = 24; i < 80; i += 4) @@ -436,9 +434,9 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, cx_write(ch->ptr1_reg, ch->fifo_start); cx_write(ch->ptr2_reg, cdt); cx_write(ch->cnt2_reg, (lines*16) >> 3); - cx_write(ch->cnt1_reg, (bpl >> 3) -1); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); - dprintk(2,"[bridge %d] sram setup %s: bpl=%d lines=%d\n", + dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n", dev->bridge, ch->name, bpl, @@ -469,43 +467,43 @@ void cx23885_sram_channel_dump(struct cx23885_dev *dev, u32 risc; unsigned int i, j, n; - printk("%s: %s - dma channel status dump\n", + printk(KERN_WARNING "%s: %s - dma channel status dump\n", dev->name, ch->name); for (i = 0; i < ARRAY_SIZE(name); i++) - printk("%s: cmds: %-15s: 0x%08x\n", + printk(KERN_WARNING "%s: cmds: %-15s: 0x%08x\n", dev->name, name[i], cx_read(ch->cmds_start + 4*i)); for (i = 0; i < 4; i++) { risc = cx_read(ch->cmds_start + 4 * (i + 14)); - printk("%s: risc%d: ", dev->name, i); + printk(KERN_WARNING "%s: risc%d: ", dev->name, i); cx23885_risc_decode(risc); } for (i = 0; i < (64 >> 2); i += n) { risc = cx_read(ch->ctrl_start + 4 * i); /* No consideration for bits 63-32 */ - printk("%s: (0x%08x) iq %x: ", dev->name, + printk(KERN_WARNING "%s: (0x%08x) iq %x: ", dev->name, ch->ctrl_start + 4 * i, i); n = cx23885_risc_decode(risc); for (j = 1; j < n; j++) { risc = cx_read(ch->ctrl_start + 4 * (i + j)); - printk("%s: iq %x: 0x%08x [ arg #%d ]\n", + printk(KERN_WARNING "%s: iq %x: 0x%08x [ arg #%d ]\n", dev->name, i+j, risc, j); } } - printk("%s: fifo: 0x%08x -> 0x%x\n", + printk(KERN_WARNING "%s: fifo: 0x%08x -> 0x%x\n", dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size); - printk("%s: ctrl: 0x%08x -> 0x%x\n", + printk(KERN_WARNING "%s: ctrl: 0x%08x -> 0x%x\n", dev->name, ch->ctrl_start, ch->ctrl_start + 6*16); - printk("%s: ptr1_reg: 0x%08x\n", + printk(KERN_WARNING "%s: ptr1_reg: 0x%08x\n", dev->name, cx_read(ch->ptr1_reg)); - printk("%s: ptr2_reg: 0x%08x\n", + printk(KERN_WARNING "%s: ptr2_reg: 0x%08x\n", dev->name, cx_read(ch->ptr2_reg)); - printk("%s: cnt1_reg: 0x%08x\n", + printk(KERN_WARNING "%s: cnt1_reg: 0x%08x\n", dev->name, cx_read(ch->cnt1_reg)); - printk("%s: cnt2_reg: 0x%08x\n", + printk(KERN_WARNING "%s: cnt2_reg: 0x%08x\n", dev->name, cx_read(ch->cnt2_reg)); } @@ -515,13 +513,13 @@ static void cx23885_risc_disasm(struct cx23885_tsport *port, struct cx23885_dev *dev = port->dev; unsigned int i, j, n; - printk("%s: risc disasm: %p [dma=0x%08lx]\n", + printk(KERN_INFO "%s: risc disasm: %p [dma=0x%08lx]\n", dev->name, risc->cpu, (unsigned long)risc->dma); for (i = 0; i < (risc->size >> 2); i += n) { - printk("%s: %04d: ", dev->name, i); + printk(KERN_INFO "%s: %04d: ", dev->name, i); n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i])); for (j = 1; j < n; j++) - printk("%s: %04d: 0x%08x [ arg #%d ]\n", + printk(KERN_INFO "%s: %04d: 0x%08x [ arg #%d ]\n", dev->name, i + j, risc->cpu[i + j], j); if (risc->cpu[i] == cpu_to_le32(RISC_JUMP)) break; @@ -600,7 +598,7 @@ static int cx23885_pci_quirks(struct cx23885_dev *dev) * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not * occur on the cx23887 bridge. */ - if(dev->bridge == CX23885_BRIDGE_885) + if (dev->bridge == CX23885_BRIDGE_885) cx_clear(RDR_TLCTL0, 1 << 4); return 0; @@ -608,13 +606,13 @@ static int cx23885_pci_quirks(struct cx23885_dev *dev) static int get_resources(struct cx23885_dev *dev) { - if (request_mem_region(pci_resource_start(dev->pci,0), - pci_resource_len(dev->pci,0), + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), dev->name)) return 0; printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n", - dev->name, (unsigned long long)pci_resource_start(dev->pci,0)); + dev->name, (unsigned long long)pci_resource_start(dev->pci, 0)); return -EBUSY; } @@ -623,7 +621,8 @@ static void cx23885_timeout(unsigned long data); int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value); -static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *port, int portno) +static int cx23885_init_tsport(struct cx23885_dev *dev, + struct cx23885_tsport *port, int portno) { dprintk(1, "%s(portno=%d)\n", __func__, portno); @@ -643,7 +642,18 @@ static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *p port->mpegq.timeout.data = (unsigned long)port; init_timer(&port->mpegq.timeout); - switch(portno) { + mutex_init(&port->frontends.lock); + INIT_LIST_HEAD(&port->frontends.felist); + port->frontends.active_fe_id = 0; + + /* This should be hardcoded allow a single frontend + * attachment to this tsport, keeping the -dvb.c + * code clean and safe. + */ + if (!port->num_frontends) + port->num_frontends = 1; + + switch (portno) { case 1: port->reg_gpcnt = VID_B_GPCNT; port->reg_gpcnt_ctl = VID_B_GPCNT_CTL; @@ -744,13 +754,13 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) mutex_unlock(&devlist); /* Configure the internal memory */ - if(dev->pci->device == 0x8880) { + if (dev->pci->device == 0x8880) { dev->bridge = CX23885_BRIDGE_887; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 25000000; dev->sram_channels = cx23887_sram_channels; } else - if(dev->pci->device == 0x8852) { + if (dev->pci->device == 0x8852) { dev->bridge = CX23885_BRIDGE_885; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 28000000; @@ -831,8 +841,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) } /* PCIe stuff */ - dev->lmmio = ioremap(pci_resource_start(dev->pci,0), - pci_resource_len(dev->pci,0)); + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); dev->bmmio = (u8 __iomem *)dev->lmmio; @@ -862,7 +872,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_i2c_register(&dev->i2c_bus[1]); cx23885_i2c_register(&dev->i2c_bus[2]); cx23885_card_setup(dev); - cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); + cx23885_call_i2c_clients(&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); cx23885_ir_init(dev); if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { @@ -908,8 +918,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) static void cx23885_dev_unregister(struct cx23885_dev *dev) { - release_mem_region(pci_resource_start(dev->pci,0), - pci_resource_len(dev->pci,0)); + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); if (!atomic_dec_and_test(&dev->refcount)) return; @@ -936,7 +946,7 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) iounmap(dev->lmmio); } -static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, +static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines) @@ -957,31 +967,31 @@ static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, } if (bpl <= sg_dma_len(sg)-offset) { /* fits into current chunk */ - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ - offset+=bpl; + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl); + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += bpl; } else { /* scanline needs to be split */ todo = bpl; - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL| + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_SOL| (sg_dma_len(sg)-offset)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ todo -= (sg_dma_len(sg)-offset); offset = 0; sg++; while (todo > sg_dma_len(sg)) { - *(rp++)=cpu_to_le32(RISC_WRITE| + *(rp++) = cpu_to_le32(RISC_WRITE| sg_dma_len(sg)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ todo -= sg_dma_len(sg); sg++; } - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo); - *(rp++)=cpu_to_le32(sg_dma_address(sg)); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ offset += todo; } offset += padding; @@ -1010,9 +1020,11 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, can cause next bpl to start close to a page border. First DMA region may be smaller than PAGE_SIZE */ /* write and jump need and extra dword */ - instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines); + instructions = fields * (1 + ((bpl + padding) * lines) + / PAGE_SIZE + lines); instructions += 2; - if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0) + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) return rc; /* write risc instructions */ @@ -1026,7 +1038,7 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); return 0; } @@ -1048,7 +1060,8 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; instructions += 1; - if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0) + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) return rc; /* write risc instructions */ @@ -1057,7 +1070,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); return 0; } @@ -1067,7 +1080,8 @@ int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, __le32 *rp; int rc; - if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) + rc = btcx_riscmem_alloc(pci, risc, 4*16); + if (rc < 0) return rc; /* write risc instructions */ @@ -1161,22 +1175,23 @@ static int cx23885_start_dma(struct cx23885_tsport *port, /* setup fifo + format */ cx23885_sram_channel_setup(dev, - &dev->sram_channels[ port->sram_chno ], + &dev->sram_channels[port->sram_chno], port->ts_packet_size, buf->risc.dma); - if(debug > 5) { - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ] ); + if (debug > 5) { + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); cx23885_risc_disasm(port, &buf->risc); } /* write TS length to chip */ cx_write(port->reg_lngth, buf->vb.width); - if ( (!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && - (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB)) ) { - printk( "%s() Failed. Unsupported value in .portb/c (0x%08x)/(0x%08x)\n", + if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && + (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) { + printk("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n", __func__, cx23885_boards[dev->board].portb, - cx23885_boards[dev->board].portc ); + cx23885_boards[dev->board].portc); return -EINVAL; } @@ -1186,7 +1201,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port, udelay(100); /* If the port supports SRC SELECT, configure it */ - if(port->reg_src_sel) + if (port->reg_src_sel) cx_write(port->reg_src_sel, port->src_sel_val); cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val); @@ -1195,7 +1210,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_write(port->reg_gen_ctrl, port->gen_ctrl_val); udelay(100); - // NOTE: this is 2 (reserved) for portb, does it matter? + /* NOTE: this is 2 (reserved) for portb, does it matter? */ /* reset counter to zero */ cx_write(port->reg_gpcnt_ctl, 3); q->count = 1; @@ -1229,11 +1244,11 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_write(ALT_PIN_OUT_SEL, 0x10100045); } - switch(dev->bridge) { + switch (dev->bridge) { case CX23885_BRIDGE_885: case CX23885_BRIDGE_887: /* enable irqs */ - dprintk(1, "%s() enabling TS int's and DMA\n", __func__ ); + dprintk(1, "%s() enabling TS int's and DMA\n", __func__); cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); cx_set(port->reg_dma_ctl, port->dma_ctl_val); cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask); @@ -1292,8 +1307,7 @@ int cx23885_restart_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf; dprintk(5, "%s()\n", __func__); - if (list_empty(&q->active)) - { + if (list_empty(&q->active)) { struct cx23885_buffer *prev; prev = NULL; @@ -1311,7 +1325,7 @@ int cx23885_restart_queue(struct cx23885_tsport *port, buf->vb.state = VIDEOBUF_ACTIVE; buf->count = q->count++; mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(5, "[%p/%d] restart_queue - first active\n", + dprintk(5, "[%p/%d] restart_queue - f/active\n", buf, buf->vb.i); } else if (prev->vb.width == buf->vb.width && @@ -1322,8 +1336,9 @@ int cx23885_restart_queue(struct cx23885_tsport *port, buf->vb.state = VIDEOBUF_ACTIVE; buf->count = q->count++; prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); - prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ - dprintk(5,"[%p/%d] restart_queue - move to active\n", + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(5, "[%p/%d] restart_queue - m/active\n", buf, buf->vb.i); } else { return 0; @@ -1362,7 +1377,8 @@ int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port, buf->vb.size = size; buf->vb.field = field /*V4L2_FIELD_TOP*/; - if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL))) + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) goto fail; cx23885_risc_databuffer(dev->pci, &buf->risc, videobuf_to_dma(&buf->vb)->sglist, @@ -1388,7 +1404,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ if (list_empty(&cx88q->active)) { - dprintk( 1, "queue is empty - first active\n" ); + dprintk(1, "queue is empty - first active\n"); list_add_tail(&buf->vb.queue, &cx88q->active); cx23885_start_dma(port, cx88q, buf); buf->vb.state = VIDEOBUF_ACTIVE; @@ -1397,7 +1413,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) dprintk(1, "[%p/%d] %s - first active\n", buf, buf->vb.i, __func__); } else { - dprintk( 1, "queue is not empty - append to active\n" ); + dprintk(1, "queue is not empty - append to active\n"); prev = list_entry(cx88q->active.prev, struct cx23885_buffer, vb.queue); list_add_tail(&buf->vb.queue, &cx88q->active); @@ -1405,7 +1421,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) buf->count = cx88q->count++; prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ - dprintk( 1, "[%p/%d] %s - append to active\n", + dprintk(1, "[%p/%d] %s - append to active\n", buf, buf->vb.i, __func__); } } @@ -1431,7 +1447,7 @@ static void do_cancel_buffers(struct cx23885_tsport *port, char *reason, buf, buf->vb.i, reason, (unsigned long)buf->risc.dma); } if (restart) { - dprintk(1, "restarting queue\n" ); + dprintk(1, "restarting queue\n"); cx23885_restart_queue(port, q); } spin_unlock_irqrestore(&port->slock, flags); @@ -1442,7 +1458,7 @@ void cx23885_cancel_buffers(struct cx23885_tsport *port) struct cx23885_dev *dev = port->dev; struct cx23885_dmaqueue *q = &port->mpegq; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); del_timer_sync(&q->timeout); cx23885_stop_dma(port); do_cancel_buffers(port, "cancel", 0); @@ -1453,10 +1469,11 @@ static void cx23885_timeout(unsigned long data) struct cx23885_tsport *port = (struct cx23885_tsport *)data; struct cx23885_dev *dev = port->dev; - dprintk(1, "%s()\n",__func__); + dprintk(1, "%s()\n", __func__); if (debug > 5) - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); cx23885_stop_dma(port); do_cancel_buffers(port, "timeout", 1); @@ -1532,16 +1549,23 @@ static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) if ((status & VID_BC_MSK_OPC_ERR) || (status & VID_BC_MSK_BAD_PKT) || (status & VID_BC_MSK_SYNC) || - (status & VID_BC_MSK_OF)) - { + (status & VID_BC_MSK_OF)) { + if (status & VID_BC_MSK_OPC_ERR) - dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", VID_BC_MSK_OPC_ERR); + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", + VID_BC_MSK_OPC_ERR); + if (status & VID_BC_MSK_BAD_PKT) - dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", VID_BC_MSK_BAD_PKT); + dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", + VID_BC_MSK_BAD_PKT); + if (status & VID_BC_MSK_SYNC) - dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", VID_BC_MSK_SYNC); + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", + VID_BC_MSK_SYNC); + if (status & VID_BC_MSK_OF) - dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", VID_BC_MSK_OF); + dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", + VID_BC_MSK_OF); printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); @@ -1595,7 +1619,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) ts2_status = cx_read(VID_C_INT_STAT); ts2_mask = cx_read(VID_C_INT_MSK); - if ( (pci_status == 0) && (ts2_status == 0) && (ts1_status == 0) ) + if ((pci_status == 0) && (ts2_status == 0) && (ts1_status == 0)) goto out; vida_count = cx_read(VID_A_GPCNT); @@ -1610,38 +1634,56 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, ts2_count); - if ( (pci_status & PCI_MSK_RISC_RD) || - (pci_status & PCI_MSK_RISC_WR) || - (pci_status & PCI_MSK_AL_RD) || - (pci_status & PCI_MSK_AL_WR) || - (pci_status & PCI_MSK_APB_DMA) || - (pci_status & PCI_MSK_VID_C) || - (pci_status & PCI_MSK_VID_B) || - (pci_status & PCI_MSK_VID_A) || - (pci_status & PCI_MSK_AUD_INT) || - (pci_status & PCI_MSK_AUD_EXT) ) - { + if ((pci_status & PCI_MSK_RISC_RD) || + (pci_status & PCI_MSK_RISC_WR) || + (pci_status & PCI_MSK_AL_RD) || + (pci_status & PCI_MSK_AL_WR) || + (pci_status & PCI_MSK_APB_DMA) || + (pci_status & PCI_MSK_VID_C) || + (pci_status & PCI_MSK_VID_B) || + (pci_status & PCI_MSK_VID_A) || + (pci_status & PCI_MSK_AUD_INT) || + (pci_status & PCI_MSK_AUD_EXT)) { if (pci_status & PCI_MSK_RISC_RD) - dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", PCI_MSK_RISC_RD); + dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", + PCI_MSK_RISC_RD); + if (pci_status & PCI_MSK_RISC_WR) - dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", PCI_MSK_RISC_WR); + dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", + PCI_MSK_RISC_WR); + if (pci_status & PCI_MSK_AL_RD) - dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", PCI_MSK_AL_RD); + dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", + PCI_MSK_AL_RD); + if (pci_status & PCI_MSK_AL_WR) - dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", PCI_MSK_AL_WR); + dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", + PCI_MSK_AL_WR); + if (pci_status & PCI_MSK_APB_DMA) - dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", PCI_MSK_APB_DMA); + dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", + PCI_MSK_APB_DMA); + if (pci_status & PCI_MSK_VID_C) - dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", PCI_MSK_VID_C); + dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", + PCI_MSK_VID_C); + if (pci_status & PCI_MSK_VID_B) - dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", PCI_MSK_VID_B); + dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", + PCI_MSK_VID_B); + if (pci_status & PCI_MSK_VID_A) - dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", PCI_MSK_VID_A); + dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", + PCI_MSK_VID_A); + if (pci_status & PCI_MSK_AUD_INT) - dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", PCI_MSK_AUD_INT); + dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", + PCI_MSK_AUD_INT); + if (pci_status & PCI_MSK_AUD_EXT) - dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", PCI_MSK_AUD_EXT); + dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", + PCI_MSK_AUD_EXT); } @@ -1753,13 +1795,13 @@ static struct pci_device_id cx23885_pci_tbl[] = { .device = 0x8852, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - },{ + }, { /* CX23887 Rev 2 */ .vendor = 0x14f1, .device = 0x8880, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - },{ + }, { /* --- end of list --- */ } }; @@ -1797,9 +1839,3 @@ module_init(cx23885_init); module_exit(cx23885_fini); /* ----------------------------------------------------------- */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 291b9d008da..e1aac07b315 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -42,6 +42,7 @@ #include "tuner-simple.h" #include "dib7000p.h" #include "dibx000_common.h" +#include "zl10353.h" static unsigned int debug; @@ -77,19 +78,19 @@ static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, enum v4l2_field field) { struct cx23885_tsport *port = q->priv_data; - return cx23885_buf_prepare(q, port, (struct cx23885_buffer*)vb, field); + return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field); } static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) { struct cx23885_tsport *port = q->priv_data; - cx23885_buf_queue(port, (struct cx23885_buffer*)vb); + cx23885_buf_queue(port, (struct cx23885_buffer *)vb); } static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - cx23885_free_buffer(q, (struct cx23885_buffer*)vb); + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); } static struct videobuf_queue_ops dvb_qops = { @@ -188,13 +189,11 @@ static struct s5h1411_config dvico_s5h1411_config = { static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, - .tuner_callback = cx23885_tuner_callback }; static struct xc5000_config dvico_xc5000_tunerconfig = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = cx23885_tuner_callback }; static struct tda829x_config tda829x_no_probe = { @@ -303,53 +302,35 @@ static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { .output_mode = OUTMODE_MPEG2_SERIAL, }; -static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) -{ - struct cx23885_tsport *port = ptr; - struct cx23885_dev *dev = port->dev; - - switch (command) { - case XC2028_TUNER_RESET: - /* Send the tuner in then out of reset */ - /* GPIO-2 xc3028 tuner */ - dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg); - - cx_set(GP0_IO, 0x00040000); - cx_clear(GP0_IO, 0x00000004); - msleep(5); - - cx_set(GP0_IO, 0x00040004); - msleep(5); - break; - case XC2028_RESET_CLK: - dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg); - break; - default: - dprintk(1, "%s: unknown command %d, arg %d\n", __func__, - command, arg); - return -EINVAL; - } - - return 0; -} +static struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, +}; static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; struct cx23885_i2c *i2c_bus = NULL; + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (!fe0) + return -EINVAL; /* init struct videobuf_dvb */ - port->dvb.name = dev->name; + fe0->dvb.name = dev->name; /* init frontend */ switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_generic_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(mt2131_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_generic_tunerconfig, 0); } @@ -358,27 +339,27 @@ static int dvb_register(struct cx23885_tsport *port) i2c_bus = &dev->i2c_bus[0]; switch (alt_tuner) { case 1: - port->dvb.frontend = + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_ezqam_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(tda829x_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_bus[1].i2c_adap, 0x42, &tda829x_no_probe); - dvb_attach(tda18271_attach, port->dvb.frontend, + dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_tda18271_config); } break; case 0: default: - port->dvb.frontend = + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_generic_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) - dvb_attach(mt2131_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) + dvb_attach(mt2131_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_generic_tunerconfig, 0); break; @@ -386,56 +367,55 @@ static int dvb_register(struct cx23885_tsport *port) break; case CX23885_BOARD_HAUPPAUGE_HVR1800lp: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1800lp_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(mt2131_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_generic_tunerconfig, 0); } break; case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_5_express, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(simple_tuner_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); } break; case CX23885_BOARD_HAUPPAUGE_HVR1500Q: i2c_bus = &dev->i2c_bus[1]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1500q_config, &dev->i2c_bus[0].i2c_adap); - if (port->dvb.frontend != NULL) - dvb_attach(xc5000_attach, port->dvb.frontend, - &i2c_bus->i2c_adap, - &hauppauge_hvr1500q_tunerconfig, i2c_bus); + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_hvr1500q_tunerconfig); break; case CX23885_BOARD_HAUPPAUGE_HVR1500: i2c_bus = &dev->i2c_bus[1]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1500_config, &dev->i2c_bus[0].i2c_adap); - if (port->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, - .callback = cx23885_hvr1500_xc3028_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .scode_table = XC3028_FE_OREN538, }; fe = dvb_attach(xc2028_attach, - port->dvb.frontend, &cfg); + fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } @@ -443,39 +423,40 @@ static int dvb_register(struct cx23885_tsport *port) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(tda10048_attach, + fe0->dvb.frontend = dvb_attach(tda10048_attach, &hauppauge_hvr1200_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(tda829x_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_bus[1].i2c_adap, 0x42, &tda829x_no_probe); - dvb_attach(tda18271_attach, port->dvb.frontend, + dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr1200_tuner_config); } break; case CX23885_BOARD_HAUPPAUGE_HVR1400: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(dib7000p_attach, + fe0->dvb.frontend = dvb_attach(dib7000p_attach, &i2c_bus->i2c_adap, 0x12, &hauppauge_hvr1400_dib7000_config); - if (port->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, .i2c_addr = 0x64, - .callback = cx23885_hvr1500_xc3028_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028L-v36.fw", + .fname = XC3028L_DEFAULT_FIRMWARE, .max_len = 64, .demod = 5000, - .d2633 = 1 + /* This is true for all demods with + v36 firmware? */ + .type = XC2028_D2633, }; fe = dvb_attach(xc2028_attach, - port->dvb.frontend, &cfg); + fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } @@ -483,77 +464,163 @@ static int dvb_register(struct cx23885_tsport *port) case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: i2c_bus = &dev->i2c_bus[port->nr - 1]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &dvico_s5h1409_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend == NULL) - port->dvb.frontend = dvb_attach(s5h1411_attach, + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(s5h1411_attach, &dvico_s5h1411_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) - dvb_attach(xc5000_attach, port->dvb.frontend, - &i2c_bus->i2c_adap, - &dvico_xc5000_tunerconfig, i2c_bus); + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &dvico_xc5000_tunerconfig); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + } + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } break; default: - printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", + printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " + " isn't supported yet\n", dev->name); break; } - if (NULL == port->dvb.frontend) { - printk("%s: frontend initialization failed\n", dev->name); + if (NULL == fe0->dvb.frontend) { + printk(KERN_ERR "%s: frontend initialization failed\n", + dev->name); return -1; } + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = cx23885_tuner_callback; /* Put the analog decoder in standby to keep it quiet */ cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL); - if (port->dvb.frontend->ops.analog_ops.standby) - port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend); + if (fe0->dvb.frontend->ops.analog_ops.standby) + fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); /* register everything */ - return videobuf_dvb_register(&port->dvb, THIS_MODULE, port, - &dev->pci->dev, adapter_nr); + return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, + &dev->pci->dev, adapter_nr, 0); + } int cx23885_dvb_register(struct cx23885_tsport *port) { + + struct videobuf_dvb_frontend *fe0; struct cx23885_dev *dev = port->dev; - int err; + int err, i; + + /* Here we need to allocate the correct number of frontends, + * as reflected in the cards struct. The reality is that currrently + * no cx23885 boards support this - yet. But, if we don't modify this + * code then the second frontend would never be allocated (later) + * and fail with error before the attach in dvb_register(). + * Without these changes we risk an OOPS later. The changes here + * are for safety, and should provide a good foundation for the + * future addition of any multi-frontend cx23885 based boards. + */ + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + port->num_frontends); + + for (i = 1; i <= port->num_frontends; i++) { + if (videobuf_dvb_alloc_frontend( + &port->frontends, i) == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } + + fe0 = videobuf_dvb_get_frontend(&port->frontends, i); + if (!fe0) + err = -EINVAL; - dprintk(1, "%s\n", __func__); - dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", - dev->board, - dev->name, - dev->pci_bus, - dev->pci_slot); + dprintk(1, "%s\n", __func__); + dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n", + dev->board, + dev->name, + dev->pci_bus, + dev->pci_slot); - err = -ENODEV; + err = -ENODEV; - /* dvb stuff */ - printk("%s: cx23885 based dvb card\n", dev->name); - videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock, + /* dvb stuff */ + /* We have to init the queue for each frontend on a port. */ + printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name); + videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &port->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx23885_buffer), port); + } err = dvb_register(port); if (err != 0) - printk("%s() dvb_register failed err = %d\n", __func__, err); + printk(KERN_ERR "%s() dvb_register failed err = %d\n", + __func__, err); return err; } int cx23885_dvb_unregister(struct cx23885_tsport *port) { - /* dvb */ - if(port->dvb.frontend) - videobuf_dvb_unregister(&port->dvb); + struct videobuf_dvb_frontend *fe0; + + /* FIXME: in an error condition where the we have + * an expected number of frontends (attach problem) + * then this might not clean up correctly, if 1 + * is invalid. + * This comment only applies to future boards IF they + * implement MFE support. + */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (fe0->dvb.frontend) + videobuf_dvb_unregister_bus(&port->frontends); return 0; } -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off -*/ diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index f98e476e961..bb7f71a1fcb 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -131,7 +131,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, printk(" >\n"); } - for (cnt = 1; cnt < msg->len; cnt++ ) { + for (cnt = 1; cnt < msg->len; cnt++) { /* following bytes */ wdata = msg->buf[cnt]; ctrl = bus->i2c_period | (1 << 12) | (1 << 2); @@ -151,9 +151,9 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, if (retval == 0) goto eio; if (i2c_debug) { - printk(" %02x", msg->buf[cnt]); + dprintk(1, " %02x", msg->buf[cnt]); if (!(ctrl & I2C_NOSTOP)) - printk(" >\n"); + dprintk(1, " >\n"); } } return msg->len; @@ -162,7 +162,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, retval = -EIO; err: if (i2c_debug) - printk(" ERR: %d\n", retval); + printk(KERN_ERR " ERR: %d\n", retval); return retval; } @@ -194,12 +194,12 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, if (i2c_debug) { if (joined) - printk(" R"); + dprintk(1, " R"); else - printk(" <R %02x", (msg->addr << 1) + 1); + dprintk(1, " <R %02x", (msg->addr << 1) + 1); } - for(cnt = 0; cnt < msg->len; cnt++) { + for (cnt = 0; cnt < msg->len; cnt++) { ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1; @@ -216,9 +216,9 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, goto eio; msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff; if (i2c_debug) { - printk(" %02x", msg->buf[cnt]); + dprintk(1, " %02x", msg->buf[cnt]); if (!(ctrl & I2C_NOSTOP)) - printk(" >\n"); + dprintk(1, " >\n"); } } return msg->len; @@ -227,7 +227,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, retval = -EIO; err: if (i2c_debug) - printk(" ERR: %d\n", retval); + printk(KERN_ERR " ERR: %d\n", retval); return retval; } @@ -353,17 +353,17 @@ static struct i2c_client cx23885_i2c_client_template = { }; static char *i2c_devs[128] = { - [0x10 >> 1] = "tda10048", - [0x12 >> 1] = "dib7000pc", - [ 0x1c >> 1 ] = "lgdt3303", - [ 0x86 >> 1 ] = "tda9887", - [ 0x32 >> 1 ] = "cx24227", - [ 0x88 >> 1 ] = "cx25837", - [ 0x84 >> 1 ] = "tda8295", - [ 0xa0 >> 1 ] = "eeprom", - [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275", + [0x10 >> 1] = "tda10048", + [0x12 >> 1] = "dib7000pc", + [0x1c >> 1] = "lgdt3303", + [0x86 >> 1] = "tda9887", + [0x32 >> 1] = "cx24227", + [0x88 >> 1] = "cx25837", + [0x84 >> 1] = "tda8295", + [0xa0 >> 1] = "eeprom", + [0xc0 >> 1] = "tuner/mt2131/tda8275", [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", - [0xc8 >> 1] = "tuner/xc3028L", + [0xc8 >> 1] = "tuner/xc3028L", }; static void do_i2c_scan(char *name, struct i2c_client *c) @@ -376,7 +376,7 @@ static void do_i2c_scan(char *name, struct i2c_client *c) rc = i2c_master_recv(c, &buf, 0); if (rc < 0) continue; - printk("%s: i2c scan: found device @ 0x%x [%s]\n", + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x [%s]\n", name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); } } @@ -408,11 +408,12 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) bus->i2c_client.adapter = &bus->i2c_adap; if (0 == bus->i2c_rc) { - printk("%s: i2c bus %d registered\n", dev->name, bus->nr); + dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr); if (i2c_scan) do_i2c_scan(dev->name, &bus->i2c_client); } else - printk("%s: i2c bus %d register FAILED\n", dev->name, bus->nr); + printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); return bus->i2c_rc; } diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c index 35e61cd112f..5b297f0323b 100644 --- a/drivers/media/video/cx23885/cx23885-vbi.c +++ b/drivers/media/video/cx23885/cx23885-vbi.c @@ -85,18 +85,8 @@ static int cx23885_start_vbi_dma(struct cx23885_dev *dev, return 0; } -int cx23885_stop_vbi_dma(struct cx23885_dev *dev) -{ - /* stop dma */ - cx_clear(VID_A_DMA_CTL, 0x00000022); - - /* disable irqs */ - cx_clear(PCI_INT_MSK, 0x000001); - cx_clear(VID_A_INT_MSK, 0x00000022); - return 0; -} -int cx23885_restart_vbi_queue(struct cx23885_dev *dev, +static int cx23885_restart_vbi_queue(struct cx23885_dev *dev, struct cx23885_dmaqueue *q) { struct cx23885_buffer *buf; diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 6047c78d84b..ab3110d6046 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -244,7 +244,7 @@ static struct cx23885_ctrl cx23885_ctls[] = { }; static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls); -const u32 cx23885_user_ctrls[] = { +static const u32 cx23885_user_ctrls[] = { V4L2_CID_USER_CLASS, V4L2_CID_BRIGHTNESS, V4L2_CID_CONTRAST, @@ -254,14 +254,13 @@ const u32 cx23885_user_ctrls[] = { V4L2_CID_AUDIO_MUTE, 0 }; -EXPORT_SYMBOL(cx23885_user_ctrls); static const u32 *ctrl_classes[] = { cx23885_user_ctrls, NULL }; -void cx23885_video_wakeup(struct cx23885_dev *dev, +static void cx23885_video_wakeup(struct cx23885_dev *dev, struct cx23885_dmaqueue *q, u32 count) { struct cx23885_buffer *buf; @@ -286,17 +285,16 @@ void cx23885_video_wakeup(struct cx23885_dev *dev, list_del(&buf->vb.queue); wake_up(&buf->vb.done); } - if (list_empty(&q->active)) { + if (list_empty(&q->active)) del_timer(&q->timeout); - } else { + else mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); - } if (bc != 1) printk(KERN_ERR "%s: %d buffers handled (should be 1)\n", __func__, bc); } -int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) +static int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) { dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", __func__, @@ -314,7 +312,7 @@ int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) return 0; } -struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, +static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, struct pci_dev *pci, struct video_device *template, char *type) @@ -334,7 +332,7 @@ struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, return vfd; } -int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) +static int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) { int i; @@ -351,7 +349,6 @@ int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) *qctrl = cx23885_ctls[i].v; return 0; } -EXPORT_SYMBOL(cx23885_ctrl_query); /* ------------------------------------------------------------------- */ /* resource management */ @@ -381,12 +378,12 @@ static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh, static int res_check(struct cx23885_fh *fh, unsigned int bit) { - return (fh->resources & bit); + return fh->resources & bit; } static int res_locked(struct cx23885_dev *dev, unsigned int bit) { - return (dev->resources & bit); + return dev->resources & bit; } static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, @@ -402,7 +399,7 @@ static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, mutex_unlock(&dev->lock); } -int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) +static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) { struct v4l2_routing route; memset(&route, 0, sizeof(route)); @@ -422,10 +419,9 @@ int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) return 0; } -EXPORT_SYMBOL(cx23885_video_mux); /* ------------------------------------------------------------------ */ -int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width, +static int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width, unsigned int height, enum v4l2_field field) { dprintk(1, "%s()\n", __func__); @@ -731,6 +727,7 @@ static int video_open(struct inode *inode, struct file *file) enum v4l2_buf_type type = 0; int radio = 0; + lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); if (h->video_dev->minor == minor) { @@ -748,16 +745,20 @@ static int video_open(struct inode *inode, struct file *file) dev = h; } } - if (NULL == dev) + if (NULL == dev) { + unlock_kernel(); return -ENODEV; + } dprintk(1, "open minor=%d radio=%d type=%s\n", minor, radio, v4l2_type_names[type]); /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -775,6 +776,7 @@ static int video_open(struct inode *inode, struct file *file) dprintk(1, "post videobuf_queue_init()\n"); + unlock_kernel(); return 0; } @@ -884,21 +886,21 @@ static int video_mmap(struct file *file, struct vm_area_struct *vma) /* ------------------------------------------------------------------ */ /* VIDEO CTRL IOCTLS */ -int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +static int cx23885_get_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl); return 0; } -EXPORT_SYMBOL(cx23885_get_control); -int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +static int cx23885_set_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)" " (disabled - no action)\n", __func__); return 0; } -EXPORT_SYMBOL(cx23885_set_control); static void init_controls(struct cx23885_dev *dev) { @@ -1072,29 +1074,29 @@ static int vidioc_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { struct cx23885_fh *fh = priv; - return (videobuf_reqbufs(get_queue(fh), p)); + return videobuf_reqbufs(get_queue(fh), p); } static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct cx23885_fh *fh = priv; - return (videobuf_querybuf(get_queue(fh), p)); + return videobuf_querybuf(get_queue(fh), p); } static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct cx23885_fh *fh = priv; - return (videobuf_qbuf(get_queue(fh), p)); + return videobuf_qbuf(get_queue(fh), p); } static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct cx23885_fh *fh = priv; - return (videobuf_dqbuf(get_queue(fh), p, - file->f_flags & O_NONBLOCK)); + return videobuf_dqbuf(get_queue(fh), p, + file->f_flags & O_NONBLOCK); } static int vidioc_streamon(struct file *file, void *priv, @@ -1146,7 +1148,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *tvnorms) return 0; } -int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) +static int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) { static const char *iname[] = { [CX23885_VMUX_COMPOSITE1] = "Composite1", @@ -1179,7 +1181,6 @@ int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) i->std = CX23885_NORMS; return 0; } -EXPORT_SYMBOL(cx23885_enum_input); static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *i) @@ -1288,7 +1289,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, return 0; } -int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) +static int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) { if (unlikely(UNSET == dev->tuner_type)) return -EINVAL; @@ -1307,7 +1308,6 @@ int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) return 0; } -EXPORT_SYMBOL(cx23885_set_freq); static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index e23d97c071e..1d53f54cd94 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -37,7 +37,7 @@ #include <linux/version.h> #include <linux/mutex.h> -#define CX23885_VERSION_CODE KERNEL_VERSION(0,0,1) +#define CX23885_VERSION_CODE KERNEL_VERSION(0, 0, 1) #define UNSET (-1U) @@ -64,6 +64,8 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1700 8 #define CX23885_BOARD_HAUPPAUGE_HVR1400 9 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 +#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ @@ -223,7 +225,7 @@ struct cx23885_tsport { int nr; int sram_chno; - struct videobuf_dvb dvb; + struct videobuf_dvb_frontends frontends; /* dma queues */ struct cx23885_dmaqueue mpegq; @@ -260,6 +262,9 @@ struct cx23885_tsport { u32 src_sel_val; u32 vld_misc_val; u32 hw_sop_ctrl_val; + + /* Allow a single tsport to have multiple frontends */ + u32 num_frontends; }; struct cx23885_dev { @@ -365,14 +370,14 @@ struct sram_channel { /* ----------------------------------------------------------- */ #define cx_read(reg) readl(dev->lmmio + ((reg)>>2)) -#define cx_write(reg,value) writel((value), dev->lmmio + ((reg)>>2)) +#define cx_write(reg, value) writel((value), dev->lmmio + ((reg)>>2)) -#define cx_andor(reg,mask,value) \ +#define cx_andor(reg, mask, value) \ writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\ ((value) & (mask)), dev->lmmio+((reg)>>2)) -#define cx_set(reg,bit) cx_andor((reg),(bit),(bit)) -#define cx_clear(reg,bit) cx_andor((reg),(bit),0) +#define cx_set(reg, bit) cx_andor((reg), (bit), (bit)) +#define cx_clear(reg, bit) cx_andor((reg), (bit), 0) /* ----------------------------------------------------------- */ /* cx23885-core.c */ @@ -409,7 +414,8 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; -extern int cx23885_tuner_callback(void *priv, int command, int arg); +extern int cx23885_tuner_callback(void *priv, int component, + int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); @@ -477,11 +483,3 @@ static inline unsigned int norm_swidth(v4l2_std_id norm) { return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; } - - -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c index 69f2bbdbb92..58e6ef1c28a 100644 --- a/drivers/media/video/cx25840/cx25840-vbi.c +++ b/drivers/media/video/cx25840/cx25840-vbi.c @@ -141,10 +141,11 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) u8 lcr[24]; fmt = arg; - if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE && + fmt->type != V4L2_BUF_TYPE_VBI_CAPTURE) return -EINVAL; svbi = &fmt->fmt.sliced; - if (svbi->service_set == 0) { + if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { /* raw VBI */ memset(svbi, 0, sizeof(*svbi)); diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 9dd7bdf659b..0b9e5fac623 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -58,6 +58,10 @@ config VIDEO_CX88_DVB select DVB_ISL6421 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_STV0288 if !DVB_FE_CUSTOMISE + select DVB_STB6000 if !DVB_FE_CUSTOMISE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 9a1374a38ec..e7136975430 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1057,12 +1057,15 @@ static int mpeg_open(struct inode *inode, struct file *file) struct cx8802_driver *drv = NULL; int err; + lock_kernel(); dev = cx8802_get_device(inode); dprintk( 1, "%s\n", __func__); - if (dev == NULL) + if (dev == NULL) { + unlock_kernel(); return -ENODEV; + } /* Make sure we can acquire the hardware */ drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD); @@ -1070,6 +1073,7 @@ static int mpeg_open(struct inode *inode, struct file *file) err = drv->request_acquire(drv); if(err != 0) { dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err); + unlock_kernel(); return err; } } @@ -1077,6 +1081,7 @@ static int mpeg_open(struct inode *inode, struct file *file) if (blackbird_initialize_codec(dev) < 0) { if (drv) drv->request_release(drv); + unlock_kernel(); return -EINVAL; } dprintk(1,"open minor=%d\n",minor); @@ -1086,6 +1091,7 @@ static int mpeg_open(struct inode *inode, struct file *file) if (NULL == fh) { if (drv) drv->request_release(drv); + unlock_kernel(); return -ENOMEM; } file->private_data = fh; @@ -1101,6 +1107,7 @@ static int mpeg_open(struct inode *inode, struct file *file) /* FIXME: locking against other video device */ cx88_set_scale(dev->core, dev->width, dev->height, fh->mpegq.field); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index de199a206a1..fbc224f46e0 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1270,27 +1270,40 @@ static const struct cx88_board cx88_boards[] = { .mpeg = CX88_MPEG_DVB, }, [CX88_BOARD_HAUPPAUGE_HVR3000] = { - /* FIXME: Add dvb & radio support */ .name = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T", .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x84bf, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x84bf, + /* 2: Line-In */ + .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x84bf, + /* 2: Line-In */ + .audioroute = 2, }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x84bf, + /* 4: FM Stereo (untested) */ + .audioroute = 8, + }, .mpeg = CX88_MPEG_DVB, + .num_frontends = 2, }, [CX88_BOARD_NORWOOD_MICRO] = { .name = "Norwood Micro TV Tuner", @@ -1349,27 +1362,34 @@ static const struct cx88_board cx88_boards[] = { .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, .audio_chip = V4L2_IDENT_WM8775, + /* + * gpio0 as reported by Mike Crash <mike AT mikecrash.com> + */ .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0xe780, + .gpio0 = 0xef88, + /* 1: TV Audio / FM Mono */ .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0xe780, + .gpio0 = 0xef88, + /* 2: Line-In */ .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, - .gpio0 = 0xe780, + .gpio0 = 0xef88, + /* 2: Line-In */ .audioroute = 2, }}, - /* fixme: Add radio support */ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, .radio = { .type = CX88_RADIO, - .gpio0 = 0xe780, + .gpio0 = 0xef88, + /* 4: FM Stereo (untested) */ + .audioroute = 8, }, }, [CX88_BOARD_ADSTECH_PTV_390] = { @@ -1446,15 +1466,26 @@ static const struct cx88_board cx88_boards[] = { .name = "Pinnacle Hybrid PCTV", .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .radio_type = TUNER_XC2028, + .radio_addr = 0x61, .input = { { .type = CX88_VMUX_TELEVISION, .vmux = 0, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x00001, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, } }, .radio = { .type = CX88_RADIO, @@ -1462,6 +1493,7 @@ static const struct cx88_board cx88_boards[] = { .gpio1 = 0x010ff, .gpio2 = 0x0ff, }, + .mpeg = CX88_MPEG_DVB, }, [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { .name = "Winfast TV2000 XP Global", @@ -1566,9 +1598,9 @@ static const struct cx88_board cx88_boards[] = { }, [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = { .name = "DViCO FusionHDTV DVB-T PRO", - .tuner_type = TUNER_ABSENT, /* XXX: Has XC3028 */ + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, .radio_type = UNSET, - .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .input = { { .type = CX88_VMUX_COMPOSITE1, @@ -1625,6 +1657,36 @@ static const struct cx88_board cx88_boards[] = { .gpio2 = 0x0cfb, }, }, + [CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = { + .name = "Prolink Pixelview Global Extreme", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x04ff, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, + }, /* Both radio, analog and ATSC work with this board. However, for analog to work, s5h1409 gate should be open, otherwise, tuner-xc3028 won't be detected. @@ -1664,6 +1726,151 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_HAUPPAUGE_HVR4000] = { + .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, + /* + * GPIO0 (WINTV2000) + * + * Analogue SAT DVB-T + * Antenna 0xc4bf 0xc4bb + * Composite 0xc4bf 0xc4bb + * S-Video 0xc4bf 0xc4bb + * Composite1 0xc4ff 0xc4fb + * S-Video1 0xc4ff 0xc4fb + * + * BIT VALUE FUNCTION GP{x}_IO + * 0 1 I:? + * 1 1 I:? + * 2 1 O:MPEG PORT 0=DVB-T 1=DVB-S + * 3 1 I:? + * 4 1 I:? + * 5 1 I:? + * 6 0 O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION + * 7 1 O:DVB-T DEMOD RESET LOW + * + * BIT VALUE FUNCTION GP{x}_OE + * 8 0 I + * 9 0 I + * a 1 O + * b 0 I + * c 0 I + * d 0 I + * e 1 O + * f 1 O + * + * WM8775 ADC + * + * 1: TV Audio / FM Mono + * 2: Line-In + * 3: Line-In Expansion + * 4: FM Stereo + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xc4bf, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xc4bf, + /* 2: Line-In */ + .audioroute = 2, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xc4bf, + /* 2: Line-In */ + .audioroute = 2, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xc4bf, + /* 4: FM Stereo */ + .audioroute = 8, + }, + .mpeg = CX88_MPEG_DVB, + .num_frontends = 2, + }, + [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = { + .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TEVII_S420] = { + .name = "TeVii S420 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TEVII_S460] = { + .name = "TeVii S460 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_OMICOM_SS4_PCI] = { + .name = "Omicom SS4 DVB-S/S2 PCI", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_TBS_8920] = { + .name = "TBS 8920 DVB-S/S2", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 1, + } }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_PROF_7300] = { + .name = "PROF 7300 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2010,9 +2217,53 @@ static const struct cx88_subid cx88_subids[] = { .subdevice = 0x4935, .card = CX88_BOARD_PROLINK_PV_8000GT, }, { + .subvendor = 0x1554, + .subdevice = 0x4976, + .card = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME, + }, { .subvendor = 0x17de, .subdevice = 0x08c1, .card = CX88_BOARD_KWORLD_ATSC_120, + }, { + .subvendor = 0x0070, + .subdevice = 0x6900, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6904, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6902, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6905, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0x0070, + .subdevice = 0x6906, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0xd420, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S420, + }, { + .subvendor = 0xd460, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S460, + }, { + .subvendor = 0xA044, + .subdevice = 0x2011, + .card = CX88_BOARD_OMICOM_SS4_PCI, + }, { + .subvendor = 0x8920, + .subdevice = 0x8888, + .card = CX88_BOARD_TBS_8920, + }, { + .subvendor = 0xB033, + .subdevice = 0x3033, + .card = CX88_BOARD_PROF_7300, }, }; @@ -2065,6 +2316,13 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */ case 28552: /* WinTV-PVR 'Roslyn' (No IR) */ case 34519: /* WinTV-PCI-FM */ + case 69009: + /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */ + case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */ + case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */ + case 69559: + /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */ + case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */ case 90002: /* Nova-T-PCI (9002) */ case 92001: /* Nova-S-Plus (Video and IR) */ case 92002: /* Nova-S-Plus (Video and IR) */ @@ -2149,9 +2407,21 @@ static int cx88_dvico_xc2028_callback(struct cx88_core *core, { switch (command) { case XC2028_TUNER_RESET: - cx_write(MO_GP0_IO, 0x101000); - mdelay(5); - cx_set(MO_GP0_IO, 0x101010); + switch (core->boardnr) { + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + /* GPIO-4 xc3028 tuner */ + + cx_set(MO_GP0_IO, 0x00001000); + cx_clear(MO_GP0_IO, 0x00000010); + msleep(100); + cx_set(MO_GP0_IO, 0x00000010); + msleep(100); + break; + default: + cx_write(MO_GP0_IO, 0x101000); + mdelay(5); + cx_set(MO_GP0_IO, 0x101010); + } break; default: return -EINVAL; @@ -2258,8 +2528,10 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, return cx88_xc3028_geniatech_tuner_callback(core, command, arg); case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: return cx88_pv_8000gt_callback(core, command, arg); case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); } @@ -2327,7 +2599,7 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core, return 0; /* Should never be here */ } -int cx88_tuner_callback(void *priv, int command, int arg) +int cx88_tuner_callback(void *priv, int component, int command, int arg) { struct i2c_algo_bit_data *i2c_algo = priv; struct cx88_core *core; @@ -2344,6 +2616,9 @@ int cx88_tuner_callback(void *priv, int command, int arg) return -EINVAL; } + if (component != DVB_FRONTEND_COMPONENT_TUNER) + return -EINVAL; + switch (core->board.tuner_type) { case TUNER_XC2028: info_printk(core, "Calling XC2028/3028 callback\n"); @@ -2392,16 +2667,22 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) { switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_HVR1300: - /* Bring the 702 demod up before i2c scanning/attach or devices are hidden */ - /* We leave here with the 702 on the bus */ - cx_write(MO_GP0_IO, 0x0000e780); + /* + * Bring the 702 demod up before i2c scanning/attach or devices are hidden + * We leave here with the 702 on the bus + * + * "reset the IR receiver on GPIO[3]" + * Reported by Mike Crash <mike AT mikecrash.com> + */ + cx_write(MO_GP0_IO, 0x0000ef88); udelay(1000); - cx_clear(MO_GP0_IO, 0x00000080); + cx_clear(MO_GP0_IO, 0x00000088); udelay(50); - cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ + cx_set(MO_GP0_IO, 0x00000088); /* 702 out of reset */ udelay(1000); break; + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: cx_write(MO_GP2_IO, 0xcf7); mdelay(50); @@ -2411,10 +2692,21 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) msleep(10); break; - case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: /* Enable the xc5000 tuner */ cx_set(MO_GP0_IO, 0x00001010); break; + + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* Init GPIO */ + cx_write(MO_GP0_IO, core->board.input[0].gpio0); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ + udelay(1000); + break; } } @@ -2435,17 +2727,22 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: - ctl->scode_table = XC3028_FE_ZARLINK456; + ctl->demod = XC3028_FE_ZARLINK456; break; case CX88_BOARD_KWORLD_ATSC_120: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: /* - * This board uses non-MTS firmware + * Those boards uses non-MTS firmware */ break; + case CX88_BOARD_PINNACLE_HYBRID_PCTV: + ctl->demod = XC3028_FE_ZARLINK456; + ctl->mts = 1; + break; default: ctl->demod = XC3028_FE_OREN538; ctl->mts = 1; @@ -2489,6 +2786,8 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: if (0 == core->i2c_rc) hauppauge_eeprom(core, eeprom); break; @@ -2570,7 +2869,18 @@ static void cx88_card_setup(struct cx88_core *core) tea5767_cfg.priv = &ctl; cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg); + break; } + case CX88_BOARD_TEVII_S420: + case CX88_BOARD_TEVII_S460: + case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: + cx_write(MO_SRST_IO, 0); + msleep(100); + cx_write(MO_SRST_IO, 1); + msleep(100); + break; } /*end switch() */ @@ -2734,10 +3044,14 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board)); - info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + if (!core->board.num_frontends) + core->board.num_frontends=1; + + info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n", pci->subsystem_vendor, pci->subsystem_device, core->board.name, core->boardnr, card[core->nr] == core->boardnr ? - "insmod option" : "autodetected"); + "insmod option" : "autodetected", + core->board.num_frontends); if (tuner[core->nr] != UNSET) core->board.tuner_type = tuner[core->nr]; diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index d656fec5901..60705b08bfe 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -549,7 +549,8 @@ void cx88_wakeup(struct cx88_core *core, mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); } if (bc != 1) - printk("%s: %d buffers handled (should be 1)\n",__func__,bc); + dprintk(2, "%s: %d buffers handled (should be 1)\n", + __func__, bc); } void cx88_shutdown(struct cx88_core *core) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index d96173ff1db..6968ab0181a 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -48,6 +48,11 @@ #include "tuner-simple.h" #include "tda9887.h" #include "s5h1411.h" +#include "stv0299.h" +#include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" +#include "cx24116.h" MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); @@ -111,13 +116,23 @@ static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire) struct cx8802_dev *dev= fe->dvb->priv; struct cx8802_driver *drv = NULL; int ret = 0; + int fe_id; + + fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe); + if (!fe_id) { + printk(KERN_ERR "%s() No frontend found\n", __func__); + return -EINVAL; + } drv = cx8802_get_driver(dev, CX88_MPEG_DVB); if (drv) { - if (acquire) + if (acquire){ + dev->frontends.active_fe_id = fe_id; ret = drv->request_acquire(drv); - else + } else { ret = drv->request_release(drv); + dev->frontends.active_fe_id = 0; + } } return ret; @@ -375,37 +390,28 @@ static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, return 0; } -static int cx88_pci_nano_callback(void *ptr, int command, int arg) +static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) { - struct cx88_core *core = ptr; - - switch (command) { - case XC2028_TUNER_RESET: - /* Send the tuner in then out of reset */ - dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg); - - switch (core->boardnr) { - case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: - /* GPIO-4 xc3028 tuner */ - - cx_set(MO_GP0_IO, 0x00001000); - cx_clear(MO_GP0_IO, 0x00000010); - msleep(100); - cx_set(MO_GP0_IO, 0x00000010); - msleep(100); - break; - } + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; - break; - case XC2028_RESET_CLK: - dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg); - break; - default: - dprintk(1, "%s: unknown command %d, arg %d\n", __func__, - command, arg); - return -EINVAL; + switch (voltage) { + case SEC_VOLTAGE_13: + printk("LNB Voltage SEC_VOLTAGE_13\n"); + cx_write(MO_GP0_IO, 0x00006040); + break; + case SEC_VOLTAGE_18: + printk("LNB Voltage SEC_VOLTAGE_18\n"); + cx_write(MO_GP0_IO, 0x00006060); + break; + case SEC_VOLTAGE_OFF: + printk("LNB Voltage SEC_VOLTAGE_off\n"); + break; } + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); return 0; } @@ -456,7 +462,12 @@ static struct s5h1409_config kworld_atsc_120_config = { static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = cx88_tuner_callback, +}; + +static struct zl10353_config cx88_pinnacle_hybrid_pctv = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, }; static struct zl10353_config cx88_geniatech_x8000_mt = { @@ -477,21 +488,25 @@ static struct s5h1411_config dvico_fusionhdtv7_config = { static struct xc5000_config dvico_fusionhdtv7_tuner_config = { .i2c_address = 0xc2 >> 1, .if_khz = 5380, - .tuner_callback = cx88_tuner_callback, }; static int attach_xc3028(u8 addr, struct cx8802_dev *dev) { struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; struct xc2028_ctrl ctl; struct xc2028_config cfg = { .i2c_adap = &dev->core->i2c_adap, .i2c_addr = addr, .ctrl = &ctl, - .callback = cx88_tuner_callback, }; - if (!dev->dvb.frontend) { + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { printk(KERN_ERR "%s/2: dvb frontend not attached. " "Can't attach xc3028\n", dev->core->name); @@ -505,10 +520,13 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) */ cx88_setup_xc3028(dev->core, &ctl); - fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); if (!fe) { printk(KERN_ERR "%s/2: xc3028 attach failed\n", dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; return -EINVAL; } @@ -518,22 +536,84 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) return 0; } +static int cx24116_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0x2; + + return 0; +} + +static int cx24116_reset_device(struct dvb_frontend *fe) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + /* Reset the part */ + /* Put the cx24116 into reset */ + cx_write(MO_SRST_IO, 0); + msleep(10); + /* Take the cx24116 out of reset */ + cx_write(MO_SRST_IO, 1); + msleep(10); + + return 0; +} + +static struct cx24116_config hauppauge_hvr4000_config = { + .demod_address = 0x05, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + +static struct cx24116_config tevii_s460_config = { + .demod_address = 0x55, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + +static struct stv0299_config tevii_tuner_sharp_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = 1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, + .set_ts_params = cx24116_set_ts_param, +}; + +static struct stv0288_config tevii_tuner_earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .set_ts_params = cx24116_set_ts_param, +}; + static int dvb_register(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ - /* init struct videobuf_dvb */ - dev->dvb.name = core->name; - dev->ts_gen_cntrl = 0x0c; + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + /* multi-frontend gate control is undefined or defaults to fe0 */ + dev->frontends.gate = 0; - /* init frontend */ + /* init frontend(s) */ switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_DVB_T1: - dev->dvb.frontend = dvb_attach(cx22702_attach, + fe0->dvb.frontend = dvb_attach(cx22702_attach, &connexant_refboard_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, &core->i2c_adap, DVB_PLL_THOMSON_DTT759X)) goto frontend_detach; @@ -543,11 +623,11 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_CONEXANT_DVB_T1: case CX88_BOARD_KWORLD_DVB_T_CX22702: case CX88_BOARD_WINFAST_DTV1000: - dev->dvb.frontend = dvb_attach(cx22702_attach, + fe0->dvb.frontend = dvb_attach(cx22702_attach, &connexant_refboard_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, &core->i2c_adap, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; @@ -557,33 +637,67 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR1300: - case CX88_BOARD_HAUPPAUGE_HVR3000: - dev->dvb.frontend = dvb_attach(cx22702_attach, + fe0->dvb.frontend = dvb_attach(cx22702_attach, &hauppauge_hvr_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) goto frontend_detach; } break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + /* DVB-S init */ + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &hauppauge_novas_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) { + dprintk( 1, "%s(): HVR3000 - DVB-S LNB Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR3000 - DVB-S Init: failed\n", __func__); + } + /* DVB-T init */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (fe1) { + dev->frontends.gate = 2; + mfe_shared = 1; + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend, + &dev->core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) { + dprintk( 1, "%s(): HVR3000 - DVB-T misc Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR3000 - DVB-T Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR3000 - DVB-T Init: can't find frontend 2.\n", __func__); + } + break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; break; } /* ZL10353 replaces MT352 on later cards */ - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_plus_v1_1, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; } @@ -591,31 +705,31 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: /* The tin box says DEE1601, but it seems to be DTT7579 * compatible, with a slightly different MT352 AGC gain. */ - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv_dual, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; break; } /* ZL10353 replaces MT352 on later cards */ - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_plus_v1_1, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_LG_Z201)) goto frontend_detach; } @@ -623,11 +737,11 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_KWORLD_DVB_T: case CX88_BOARD_DNTV_LIVE_DVB_T: case CX88_BOARD_ADSTECH_DVB_T_PCI: - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_UNKNOWN_1)) goto frontend_detach; } @@ -635,10 +749,10 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: #if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE)) /* MT352 is on a secondary I2C bus made from some GPIO lines */ - dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, &dev->vp3054->adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) goto frontend_detach; @@ -649,22 +763,22 @@ static int dvb_register(struct cx8802_dev *dev) #endif break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_hybrid, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_THOMSON_FE6600)) goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_xc3028, &core->i2c_adap); - if (dev->dvb.frontend == NULL) - dev->dvb.frontend = dvb_attach(mt352_attach, + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv_mt352_xc3028, &core->i2c_adap); /* @@ -672,16 +786,16 @@ static int dvb_register(struct cx8802_dev *dev) * We must not permit gate_ctrl to be performed, or * the xc3028 cannot communicate on the bus. */ - if (dev->dvb.frontend) - dev->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (fe0->dvb.frontend) + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; if (attach_xc3028(0x61, dev) < 0) return -EINVAL; break; case CX88_BOARD_PCHDTV_HD3000: - dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, + fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) goto frontend_detach; @@ -698,11 +812,11 @@ static int dvb_register(struct cx8802_dev *dev) /* Select RF connector callback */ fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_MICROTUNE_4042FI5)) goto frontend_detach; @@ -716,11 +830,11 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 9); mdelay(200); - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) goto frontend_detach; @@ -734,15 +848,15 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 1); mdelay(200); - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_5_gold, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF)) goto frontend_detach; - if (!dvb_attach(tda9887_attach, dev->dvb.frontend, + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, &core->i2c_adap, 0x43)) goto frontend_detach; } @@ -755,25 +869,25 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 1); mdelay(200); - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &pchdtv_hd5500, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF)) goto frontend_detach; - if (!dvb_attach(tda9887_attach, dev->dvb.frontend, + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, &core->i2c_adap, 0x43)) goto frontend_detach; } break; case CX88_BOARD_ATI_HDTVWONDER: - dev->dvb.frontend = dvb_attach(nxt200x_attach, + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &ati_hdtvwonder, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D)) goto frontend_detach; @@ -781,135 +895,224 @@ static int dvb_register(struct cx8802_dev *dev) break; case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: - dev->dvb.frontend = dvb_attach(cx24123_attach, + fe0->dvb.frontend = dvb_attach(cx24123_attach, &hauppauge_novas_config, &core->i2c_adap); - if (dev->dvb.frontend) { - if (!dvb_attach(isl6421_attach, dev->dvb.frontend, - &core->i2c_adap, 0x08, 0x00, 0x00)) + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) goto frontend_detach; } break; case CX88_BOARD_KWORLD_DVBS_100: - dev->dvb.frontend = dvb_attach(cx24123_attach, + fe0->dvb.frontend = dvb_attach(cx24123_attach, &kworld_dvbs_100_config, &core->i2c_adap); - if (dev->dvb.frontend) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; } break; case CX88_BOARD_GENIATECH_DVBS: - dev->dvb.frontend = dvb_attach(cx24123_attach, + fe0->dvb.frontend = dvb_attach(cx24123_attach, &geniatech_dvbs_config, &core->i2c_adap); - if (dev->dvb.frontend) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; } break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: - dev->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &pinnacle_pctv_hd_800i_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - /* tuner_config.video_dev must point to - * i2c_adap.algo_data - */ - if (!dvb_attach(xc5000_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, &core->i2c_adap, - &pinnacle_pctv_hd_800i_tuner_config, - core->i2c_adap.algo_data)) + &pinnacle_pctv_hd_800i_tuner_config)) goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: - dev->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &dvico_hdtv5_pci_nano_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &core->i2c_adap, .i2c_addr = 0x61, - .callback = cx88_pci_nano_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .scode_table = XC3028_FE_OREN538, }; fe = dvb_attach(xc2028_attach, - dev->dvb.frontend, &cfg); + fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } break; case CX88_BOARD_PINNACLE_HYBRID_PCTV: - dev->dvb.frontend = dvb_attach(zl10353_attach, - &cx88_geniatech_x8000_mt, + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_pinnacle_hybrid_pctv, &core->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) - goto frontend_detach; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } break; case CX88_BOARD_GENIATECH_X8000_MT: dev->ts_gen_cntrl = 0x00; - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &cx88_geniatech_x8000_mt, &core->i2c_adap); if (attach_xc3028(0x61, dev) < 0) goto frontend_detach; break; case CX88_BOARD_KWORLD_ATSC_120: - dev->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &kworld_atsc_120_config, &core->i2c_adap); if (attach_xc3028(0x61, dev) < 0) goto frontend_detach; break; case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: - dev->dvb.frontend = dvb_attach(s5h1411_attach, + fe0->dvb.frontend = dvb_attach(s5h1411_attach, &dvico_fusionhdtv7_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - /* tuner_config.video_dev must point to - * i2c_adap.algo_data - */ - if (!dvb_attach(xc5000_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, &core->i2c_adap, - &dvico_fusionhdtv7_tuner_config, - core->i2c_adap.algo_data)) + &dvico_fusionhdtv7_tuner_config)) goto frontend_detach; } break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + /* DVB-S/S2 Init */ + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if(!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) { + dprintk( 1, "%s(): HVR4000 - DVB-S LNB Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR4000 - DVB-S Init: failed\n", __func__); + } + /* DVB-T Init */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (fe1) { + dev->frontends.gate = 2; + mfe_shared = 1; + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend, + &dev->core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) { + dprintk( 1, "%s(): HVR4000 - DVB-T misc Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR4000 - DVB-T Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR4000 - DVB-T Init: can't find frontend 2.\n", __func__); + } + break; + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->core->i2c_adap, + 0x08, ISL6421_DCL, 0x00); + } + break; + case CX88_BOARD_TEVII_S420: + fe0->dvb.frontend = dvb_attach(stv0299_attach, + &tevii_tuner_sharp_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, + &core->i2c_adap, DVB_PLL_OPERA1)) + goto frontend_detach; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + + } else { + fe0->dvb.frontend = dvb_attach(stv0288_attach, + &tevii_tuner_earda_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61, + &core->i2c_adap)) + goto frontend_detach; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + + } + } + break; + case CX88_BOARD_TEVII_S460: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tevii_s460_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + break; + case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", core->name); break; } - if (NULL == dev->dvb.frontend) { + + if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) { printk(KERN_ERR "%s/2: frontend initialization failed\n", core->name); return -EINVAL; } + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = cx88_tuner_callback; /* Ensure all frontends negotiate bus access */ - dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; /* Put the analog decoder in standby to keep it quiet */ cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL); /* register everything */ - return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, - &dev->pci->dev, adapter_nr); + return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, mfe_shared); frontend_detach: - if (dev->dvb.frontend) { - dvb_frontend_detach(dev->dvb.frontend); - dev->dvb.frontend = NULL; + if (fe0->dvb.frontend) { + dvb_frontend_detach(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; } return -EINVAL; } @@ -933,6 +1136,38 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) cx_clear(MO_GP0_IO, 0x00000004); udelay(1000); break; + + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + if(core->dvbdev->frontends.active_fe_id == 1) { + /* DVB-S/S2 Enabled */ + + /* Toggle reset on cx22702 leaving i2c active */ + cx_write(MO_GP0_IO, (core->board.input[0].gpio0 & 0x0000ff00) | 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */ + cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */ + udelay(1000); + + cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */ + core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */ + } else + if (core->dvbdev->frontends.active_fe_id == 2) { + /* DVB-T Enabled */ + + /* Put the cx24116/cx24123 into reset */ + cx_write(MO_SRST_IO, 0); + + /* cx22702 out of reset and enable it */ + cx_set(MO_GP0_IO, 0x00000080); + cx_clear(MO_GP0_IO, 0x00000004); + core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */ + udelay(1000); + } + break; + default: err = -ENODEV; } @@ -950,6 +1185,9 @@ static int cx8802_dvb_advise_release(struct cx8802_driver *drv) case CX88_BOARD_HAUPPAUGE_HVR1300: /* Do Nothing, leave the cx22702 on the bus. */ break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + break; default: err = -ENODEV; } @@ -960,7 +1198,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) { struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; - int err; + int err, i; + struct videobuf_dvb_frontend *fe; dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", @@ -980,18 +1219,28 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); - videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops, + dev->ts_gen_cntrl = 0x0c; + + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (!fe) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); + continue; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), dev); + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; + } err = dvb_register(dev); if (err != 0) printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n", core->name, err); - - fail_core: +fail_core: return err; } @@ -999,9 +1248,7 @@ static int cx8802_dvb_remove(struct cx8802_driver *drv) { struct cx8802_dev *dev = drv->core->dvbdev; - /* dvb */ - if (dev->dvb.frontend) - videobuf_dvb_unregister(&dev->dvb); + videobuf_dvb_unregister_bus(&dev->frontends); vp3054_i2c_remove(dev); diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index d7406a994f0..01de2300709 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -116,18 +116,25 @@ static int detach_inform(struct i2c_client *client) void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg) { + struct videobuf_dvb_frontends *f = &core->dvbdev->frontends; + struct videobuf_dvb_frontend *fe = NULL; if (0 != core->i2c_rc) return; #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) - if ( (core->dvbdev) && (core->dvbdev->dvb.frontend) ) { - if (core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl) - core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl(core->dvbdev->dvb.frontend, 1); + if (core->dvbdev && f) { + if(f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, 1); i2c_clients_command(&core->i2c_adap, cmd, arg); - if (core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl) - core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl(core->dvbdev->dvb.frontend, 0); + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, 0); } else #endif i2c_clients_command(&core->i2c_adap, cmd, arg); @@ -201,7 +208,23 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) core->i2c_rc = i2c_bit_add_bus(&core->i2c_adap); if (0 == core->i2c_rc) { + static u8 tuner_data[] = + { 0x0b, 0xdc, 0x86, 0x52 }; + static struct i2c_msg tuner_msg = + { .flags = 0, .addr = 0xc2 >> 1, .buf = tuner_data, .len = 4 }; + dprintk(1, "i2c register ok\n"); + switch( core->boardnr ) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + printk("%s: i2c init: enabling analog demod on HVR1300/3000/4000 tuner\n", + core->name); + i2c_transfer(core->i2c_client.adapter, &tuner_msg, 1); + break; + default: + break; + } if (i2c_scan) do_i2c_scan(core->name,&core->i2c_client); } else diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 53526d997a4..8683d104de7 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -224,6 +224,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: ir_codes = ir_codes_hauppauge_new; ir_type = IR_TYPE_RC5; ir->sampling = 1; @@ -259,6 +261,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->polling = 1; /* ms */ break; case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: ir_codes = ir_codes_pixelview_new; ir->gpio_addr = MO_GP1_IO; ir->mask_keycode = 0x3f; @@ -392,7 +395,7 @@ void cx88_ir_irq(struct cx88_core *core) { struct cx88_IR *ir = core->ir; u32 samples, ircode; - int i; + int i, start, range, toggle, dev, code; if (NULL == ir) return; @@ -461,6 +464,34 @@ void cx88_ir_irq(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); + ir_dprintk("biphase decoded: %x\n", ircode); + /* + * RC5 has an extension bit which adds a new range + * of available codes, this is detected here. Also + * hauppauge remotes (black/silver) always use + * specific device ids. If we do not filter the + * device ids then messages destined for devices + * such as TVs (id=0) will get through to the + * device causing mis-fired events. + */ + /* split rc5 data block ... */ + start = (ircode & 0x2000) >> 13; + range = (ircode & 0x1000) >> 12; + toggle= (ircode & 0x0800) >> 11; + dev = (ircode & 0x07c0) >> 6; + code = (ircode & 0x003f) | ((range << 6) ^ 0x0040); + if( start != 1) + /* no key pressed */ + break; + if ( dev != 0x1e && dev != 0x1f ) + /* not a hauppauge remote */ + break; + ir_input_keydown(ir->input, &ir->ir, code, ircode); + ir->release = jiffies + msecs_to_jiffies(120); + break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); ir_dprintk("biphase decoded: %x\n", ircode); diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index a6b061c2644..6df5cf31418 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -768,7 +768,8 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, { struct cx8802_dev *dev; struct cx88_core *core; - int err; + struct videobuf_dvb_frontend *demod; + int err,i; /* general setup */ core = cx88_core_get(pci_dev); @@ -781,6 +782,11 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, if (!core->board.mpeg) goto fail_core; + if (!core->board.num_frontends) { + printk(KERN_ERR "%s() .num_frontends should be non-zero, err = %d\n", __func__, err); + goto fail_core; + } + err = -ENOMEM; dev = kzalloc(sizeof(*dev),GFP_KERNEL); if (NULL == dev) @@ -795,6 +801,20 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, INIT_LIST_HEAD(&dev->drvlist); list_add_tail(&dev->devlist,&cx8802_devlist); + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); + + for (i = 1; i <= core->board.num_frontends; i++) { + demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if(demod == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + err = -ENOMEM; + goto fail_free; + } + } + /* Maintain a reference so cx88-video can query the 8802 device. */ core->dvbdev = dev; diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 3a1977f41e2..7dd506b987f 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -767,6 +767,14 @@ void cx88_set_tvaudio(struct cx88_core *core) case WW_FM: set_audio_standard_FM(core, radio_deemphasis); break; + case WW_I2SADC: + set_audio_start(core, 0x01); + /* Slave/Philips/Autobaud */ + cx_write(AUD_I2SINPUTCNTL, 0); + /* Switch to "I2S ADC mode" */ + cx_write(AUD_I2SCNTL, 0x1); + set_audio_finish(core, EN_I2SIN_ENABLE); + break; case WW_NONE: default: printk("%s/0: unknown tv audio mode [%d]\n", @@ -895,6 +903,9 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) break; } break; + case WW_I2SADC: + /* DO NOTHING */ + break; } if (UNSET != ctl) { diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index ef4d56ea002..3904b73f52e 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -426,24 +426,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) /* if there are audioroutes defined, we have an external ADC to deal with audio */ - if (INPUT(input).audioroute) { - - /* cx2388's C-ADC is connected to the tuner only. - When used with S-Video, that ADC is busy dealing with - chroma, so an external must be used for baseband audio */ - - if (INPUT(input).type != CX88_VMUX_TELEVISION && - INPUT(input).type != CX88_RADIO) { - /* "ADC mode" */ - cx_write(AUD_I2SCNTL, 0x1); - cx_set(AUD_CTL, EN_I2SIN_ENABLE); - } else { - /* Normal mode */ - cx_write(AUD_I2SCNTL, 0x0); - cx_clear(AUD_CTL, EN_I2SIN_ENABLE); - } - /* The wm8775 module has the "2" route hardwired into the initialization. Some boards may use different routes for different inputs. HVR-1300 surely does */ @@ -454,9 +437,19 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) route.input = INPUT(input).audioroute; cx88_call_i2c_clients(core, VIDIOC_INT_S_AUDIO_ROUTING, &route); - } - + /* cx2388's C-ADC is connected to the tuner only. + When used with S-Video, that ADC is busy dealing with + chroma, so an external must be used for baseband audio */ + if (INPUT(input).type != CX88_VMUX_TELEVISION ) { + /* "I2S ADC mode" */ + core->tvaudio = WW_I2SADC; + cx88_set_tvaudio(core); + } else { + /* Normal mode */ + cx_write(AUD_I2SCNTL, 0x0); + cx_clear(AUD_CTL, EN_I2SIN_ENABLE); + } } return 0; @@ -773,6 +766,7 @@ static int video_open(struct inode *inode, struct file *file) enum v4l2_buf_type type = 0; int radio = 0; + lock_kernel(); list_for_each_entry(h, &cx8800_devlist, devlist) { if (h->video_dev->minor == minor) { dev = h; @@ -788,8 +782,10 @@ static int video_open(struct inode *inode, struct file *file) dev = h; } } - if (NULL == dev) + if (NULL == dev) { + unlock_kernel(); return -ENODEV; + } core = dev->core; @@ -798,8 +794,10 @@ static int video_open(struct inode *inode, struct file *file) /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -827,11 +825,29 @@ static int video_open(struct inode *inode, struct file *file) cx_write(MO_GP0_IO, core->board.radio.gpio0); cx_write(MO_GP1_IO, core->board.radio.gpio1); cx_write(MO_GP2_IO, core->board.radio.gpio2); - core->tvaudio = WW_FM; - cx88_set_tvaudio(core); - cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); + if (core->board.radio.audioroute) { + if(core->board.audio_chip && + core->board.audio_chip == V4L2_IDENT_WM8775) { + struct v4l2_routing route; + + route.input = core->board.radio.audioroute; + cx88_call_i2c_clients(core, + VIDIOC_INT_S_AUDIO_ROUTING, &route); + } + /* "I2S ADC mode" */ + core->tvaudio = WW_I2SADC; + cx88_set_tvaudio(core); + } else { + /* FM Mode */ + core->tvaudio = WW_FM; + cx88_set_tvaudio(core); + cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); + } cx88_call_i2c_clients(core,AUDC_SET_RADIO,NULL); } + unlock_kernel(); + + atomic_inc(&core->users); return 0; } @@ -920,7 +936,8 @@ static int video_release(struct inode *inode, struct file *file) file->private_data = NULL; kfree(fh); - cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); + if(atomic_dec_and_test(&dev->core->users)) + cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); return 0; } diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 54fe6509471..76207c2856b 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -221,6 +221,14 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 #define CX88_BOARD_PROLINK_PV_8000GT 66 #define CX88_BOARD_KWORLD_ATSC_120 67 +#define CX88_BOARD_HAUPPAUGE_HVR4000 68 +#define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 +#define CX88_BOARD_TEVII_S460 70 +#define CX88_BOARD_OMICOM_SS4_PCI 71 +#define CX88_BOARD_TBS_8920 72 +#define CX88_BOARD_TEVII_S420 73 +#define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 +#define CX88_BOARD_PROF_7300 75 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -239,7 +247,7 @@ struct cx88_input { enum cx88_itype type; u32 gpio0, gpio1, gpio2, gpio3; unsigned int vmux:2; - unsigned int audioroute:2; + unsigned int audioroute:4; }; struct cx88_board { @@ -253,6 +261,7 @@ struct cx88_board { struct cx88_input radio; enum cx88_board_type mpeg; unsigned int audio_chip; + int num_frontends; }; struct cx88_subid { @@ -342,11 +351,13 @@ struct cx88_core { struct mutex lock; /* various v4l controls */ u32 freq; + atomic_t users; /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ struct cx8802_dev *dvbdev; enum cx88_board_type active_type_id; int active_ref; + int active_fe_id; }; struct cx8800_dev; @@ -481,7 +492,7 @@ struct cx8802_dev { #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) /* for dvb only */ - struct videobuf_dvb dvb; + struct videobuf_dvb_frontends frontends; #endif #if defined(CONFIG_VIDEO_CX88_VP3054) || \ @@ -601,7 +612,7 @@ extern void cx88_call_i2c_clients(struct cx88_core *core, /* ----------------------------------------------------------- */ /* cx88-cards.c */ -extern int cx88_tuner_callback(void *dev, int command, int arg); +extern int cx88_tuner_callback(void *dev, int component, int command, int arg); extern int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci); extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr); @@ -619,6 +630,7 @@ extern void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl); #define WW_EIAJ 7 #define WW_I2SPT 8 #define WW_FM 9 +#define WW_I2SADC 10 void cx88_set_tvaudio(struct cx88_core *core); void cx88_newstation(struct cx88_core *core); diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 79faedf5852..298810d5262 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -192,7 +192,7 @@ static void dabusb_iso_complete (struct urb *purb) err("dabusb_iso_complete: invalid len %d", len); } else - warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status); + dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status); if (dst != purb->actual_length) err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length); } @@ -289,7 +289,7 @@ static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb) } if( ret == -EPIPE ) { - warn("CLEAR_FEATURE request to remove STALL condition."); + dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n"); if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe))) err("request failed"); } @@ -866,7 +866,8 @@ static int __init dabusb_init (void) dbg("dabusb_init: driver registered"); - info(DRIVER_VERSION ":" DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); out: return retval; diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c deleted file mode 100644 index 88d6df71d05..00000000000 --- a/drivers/media/video/dpc7146.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - dpc7146.c - v4l2 driver for the dpc7146 demonstration board - - Copyright (C) 2000-2003 Michael Hunold <michael@mihu.de> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#define DEBUG_VARIABLE debug - -#include <media/saa7146_vv.h> -#include <linux/video_decoder.h> /* for saa7111a */ - -#define I2C_SAA7111A 0x24 - -/* All unused bytes are reserverd. */ -#define SAA711X_CHIP_VERSION 0x00 -#define SAA711X_ANALOG_INPUT_CONTROL_1 0x02 -#define SAA711X_ANALOG_INPUT_CONTROL_2 0x03 -#define SAA711X_ANALOG_INPUT_CONTROL_3 0x04 -#define SAA711X_ANALOG_INPUT_CONTROL_4 0x05 -#define SAA711X_HORIZONTAL_SYNC_START 0x06 -#define SAA711X_HORIZONTAL_SYNC_STOP 0x07 -#define SAA711X_SYNC_CONTROL 0x08 -#define SAA711X_LUMINANCE_CONTROL 0x09 -#define SAA711X_LUMINANCE_BRIGHTNESS 0x0A -#define SAA711X_LUMINANCE_CONTRAST 0x0B -#define SAA711X_CHROMA_SATURATION 0x0C -#define SAA711X_CHROMA_HUE_CONTROL 0x0D -#define SAA711X_CHROMA_CONTROL 0x0E -#define SAA711X_FORMAT_DELAY_CONTROL 0x10 -#define SAA711X_OUTPUT_CONTROL_1 0x11 -#define SAA711X_OUTPUT_CONTROL_2 0x12 -#define SAA711X_OUTPUT_CONTROL_3 0x13 -#define SAA711X_V_GATE_1_START 0x15 -#define SAA711X_V_GATE_1_STOP 0x16 -#define SAA711X_V_GATE_1_MSB 0x17 -#define SAA711X_TEXT_SLICER_STATUS 0x1A -#define SAA711X_DECODED_BYTES_OF_TS_1 0x1B -#define SAA711X_DECODED_BYTES_OF_TS_2 0x1C -#define SAA711X_STATUS_BYTE 0x1F - -#define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "debug verbosity"); - -static int dpc_num; - -#define DPC_INPUTS 2 -static struct v4l2_input dpc_inputs[DPC_INPUTS] = { - { 0, "Port A", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, - { 1, "Port B", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, -}; - -#define DPC_AUDIOS 0 - -static struct saa7146_extension_ioctls ioctls[] = { - { VIDIOC_G_INPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_S_INPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_S_STD, SAA7146_AFTER }, - { 0, 0 } -}; - -struct dpc -{ - struct video_device *video_dev; - struct video_device *vbi_dev; - - struct i2c_adapter i2c_adapter; - struct i2c_client *saa7111a; - - int cur_input; /* current input */ -}; - -static int dpc_check_clients(struct device *dev, void *data) -{ - struct dpc* dpc = data; - struct i2c_client *client = i2c_verify_client(dev); - - if( !client ) - return 0; - - if( I2C_SAA7111A == client->addr ) - dpc->saa7111a = client; - - return 0; -} - -/* fixme: add vbi stuff here */ -static int dpc_probe(struct saa7146_dev* dev) -{ - struct dpc* dpc = NULL; - - dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL); - if( NULL == dpc ) { - printk("dpc_v4l2.o: dpc_probe: not enough kernel memory.\n"); - return -ENOMEM; - } - - /* FIXME: enable i2c-port pins, video-port-pins - video port pins should be enabled here ?! */ - saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); - - dpc->i2c_adapter = (struct i2c_adapter) { - .class = I2C_CLASS_TV_ANALOG, - .name = "dpc7146", - }; - saa7146_i2c_adapter_prepare(dev, &dpc->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); - if(i2c_add_adapter(&dpc->i2c_adapter) < 0) { - DEB_S(("cannot register i2c-device. skipping.\n")); - kfree(dpc); - return -EFAULT; - } - - /* loop through all i2c-devices on the bus and look who is there */ - device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients); - - /* check if all devices are present */ - if (!dpc->saa7111a) { - DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n")); - i2c_del_adapter(&dpc->i2c_adapter); - kfree(dpc); - return -ENODEV; - } - - /* all devices are present, probe was successful */ - DEB_D(("dpc_v4l2.o: dpc_probe succeeded for this device.\n")); - - /* we store the pointer in our private data field */ - dev->ext_priv = dpc; - - return 0; -} - -/* bring hardware to a sane state. this has to be done, just in case someone - wants to capture from this device before it has been properly initialized. - the capture engine would badly fail, because no valid signal arrives on the - saa7146, thus leading to timeouts and stuff. */ -static int dpc_init_done(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_D(("dpc_v4l2.o: dpc_init_done called.\n")); - - /* initialize the helper ics to useful values */ - i2c_smbus_write_byte_data(dpc->saa7111a, 0x00, 0x11); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x02, 0xc0); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x03, 0x30); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x04, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x05, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x06, 0xde); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x07, 0xad); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x08, 0xa8); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x09, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0a, 0x80); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0b, 0x47); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0c, 0x40); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0d, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0e, 0x03); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x10, 0xd0); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x11, 0x1c); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x12, 0xc1); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x13, 0x30); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x1f, 0x81); - - return 0; -} - -static struct saa7146_ext_vv vv_data; - -/* this function only gets called when the probing was successful */ -static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_D(("dpc_v4l2.o: dpc_attach called.\n")); - - /* checking for i2c-devices can be omitted here, because we - already did this in "dpc_vl42_probe" */ - - saa7146_vv_init(dev,&vv_data); - if( 0 != saa7146_register_device(&dpc->video_dev, dev, "dpc", VFL_TYPE_GRABBER)) { - ERR(("cannot register capture v4l2 device. skipping.\n")); - return -1; - } - - /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ - if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { - if( 0 != saa7146_register_device(&dpc->vbi_dev, dev, "dpc", VFL_TYPE_VBI)) { - ERR(("cannot register vbi v4l2 device. skipping.\n")); - } - } - - i2c_use_client(dpc->saa7111a); - - printk("dpc: found 'dpc7146 demonstration board'-%d.\n",dpc_num); - dpc_num++; - - /* the rest */ - dpc->cur_input = 0; - dpc_init_done(dev); - - return 0; -} - -static int dpc_detach(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_EE(("dev:%p\n",dev)); - - i2c_release_client(dpc->saa7111a); - - saa7146_unregister_device(&dpc->video_dev,dev); - if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { - saa7146_unregister_device(&dpc->vbi_dev,dev); - } - saa7146_vv_release(dev); - - dpc_num--; - - i2c_del_adapter(&dpc->i2c_adapter); - kfree(dpc); - return 0; -} - -#ifdef axa -int dpc_vbi_bypass(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - int i = 1; - - /* switch bypass in saa7111a */ - if ( 0 != dpc->saa7111a->driver->command(dpc->saa7111a,SAA711X_VBI_BYPASS, &i)) { - printk("dpc_v4l2.o: VBI_BYPASS: could not address saa7111a.\n"); - return -1; - } - - return 0; -} -#endif - -static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) -{ - struct saa7146_dev *dev = fh->dev; - struct dpc* dpc = (struct dpc*)dev->ext_priv; -/* - struct saa7146_vv *vv = dev->vv_data; -*/ - switch(cmd) - { - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); - - if( i->index < 0 || i->index >= DPC_INPUTS) { - return -EINVAL; - } - - memcpy(i, &dpc_inputs[i->index], sizeof(struct v4l2_input)); - - DEB_D(("dpc_v4l2.o: v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n",i->index)); - return 0; - } - case VIDIOC_G_INPUT: - { - int *input = (int *)arg; - *input = dpc->cur_input; - - DEB_D(("dpc_v4l2.o: VIDIOC_G_INPUT: %d\n",*input)); - return 0; - } - case VIDIOC_S_INPUT: - { - int input = *(int *)arg; - - if (input < 0 || input >= DPC_INPUTS) { - return -EINVAL; - } - - dpc->cur_input = input; - - /* fixme: switch input here, switch audio, too! */ -// saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); - printk("dpc_v4l2.o: VIDIOC_S_INPUT: fixme switch input.\n"); - - return 0; - } - default: -/* - DEB_D(("dpc_v4l2.o: v4l2_ioctl does not handle this ioctl.\n")); -*/ - return -ENOIOCTLCMD; - } - return 0; -} - -static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) -{ - return 0; -} - -static struct saa7146_standard standard[] = { - { - .name = "PAL", .id = V4L2_STD_PAL, - .v_offset = 0x17, .v_field = 288, - .h_offset = 0x14, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "NTSC", .id = V4L2_STD_NTSC, - .v_offset = 0x16, .v_field = 240, - .h_offset = 0x06, .h_pixels = 708, - .v_max_out = 480, .h_max_out = 640, - }, { - .name = "SECAM", .id = V4L2_STD_SECAM, - .v_offset = 0x14, .v_field = 288, - .h_offset = 0x14, .h_pixels = 720, - .v_max_out = 576, .h_max_out = 768, - } -}; - -static struct saa7146_extension extension; - -static struct saa7146_pci_extension_data dpc = { - .ext_priv = "Multimedia eXtension Board", - .ext = &extension, -}; - -static struct pci_device_id pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x0000, - .subdevice = 0x0000, - .driver_data = (unsigned long)&dpc, - }, { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_ext_vv vv_data = { - .inputs = DPC_INPUTS, - .capabilities = V4L2_CAP_VBI_CAPTURE, - .stds = &standard[0], - .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), - .std_callback = &std_callback, - .ioctls = &ioctls[0], - .ioctl = dpc_ioctl, -}; - -static struct saa7146_extension extension = { - .name = "dpc7146 demonstration board", - .flags = SAA7146_USE_I2C_IRQ, - - .pci_tbl = &pci_tbl[0], - .module = THIS_MODULE, - - .probe = dpc_probe, - .attach = dpc_attach, - .detach = dpc_detach, - - .irq_mask = 0, - .irq_func = NULL, -}; - -static int __init dpc_init_module(void) -{ - if( 0 != saa7146_register_extension(&extension)) { - DEB_S(("failed to register extension.\n")); - return -ENODEV; - } - - return 0; -} - -static void __exit dpc_cleanup_module(void) -{ - saa7146_unregister_extension(&extension); -} - -module_init(dpc_init_module); -module_exit(dpc_cleanup_module); - -MODULE_DESCRIPTION("video4linux-2 driver for the 'dpc7146 demonstration board'"); -MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index de943cf6c16..d65d0572403 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1101,7 +1101,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), - .driver_info = EM2820_BOARD_UNKNOWN }, + .driver_info = EM2820_BOARD_PROLINK_PLAYTV_USB2 }, { USB_DEVICE(0xeb1a, 0x2860), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2861), @@ -1271,7 +1271,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT}, }; -int em28xx_tuner_callback(void *ptr, int command, int arg) +int em28xx_tuner_callback(void *ptr, int component, int command, int arg) { int rc = 0; struct em28xx *dev = ptr; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d2b1a1a5268..c99e2383b7e 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -249,7 +249,6 @@ static int attach_xc3028(u8 addr, struct em28xx *dev) memset(&cfg, 0, sizeof(cfg)); cfg.i2c_adap = &dev->i2c_adap; cfg.i2c_addr = addr; - cfg.callback = em28xx_tuner_callback; if (!dev->dvb->frontend) { printk(KERN_ERR "%s/2: dvb frontend not attached. " @@ -274,7 +273,7 @@ static int attach_xc3028(u8 addr, struct em28xx *dev) /* ------------------------------------------------------------------ */ -int register_dvb(struct em28xx_dvb *dvb, +static int register_dvb(struct em28xx_dvb *dvb, struct module *module, struct em28xx *dev, struct device *device) @@ -422,6 +421,8 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2880_BOARD_KWORLD_DVB_310U: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_with_xc3028, &dev->i2c_adap); @@ -443,24 +444,6 @@ static int dvb_init(struct em28xx *dev) } break; #endif - case EM2880_BOARD_TERRATEC_HYBRID_XS: - dvb->frontend = dvb_attach(zl10353_attach, - &em28xx_zl10353_with_xc3028, - &dev->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) { - result = -EINVAL; - goto out_free; - } - break; - case EM2880_BOARD_KWORLD_DVB_310U: - dvb->frontend = dvb_attach(zl10353_attach, - &em28xx_zl10353_with_xc3028, - &dev->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) { - result = -EINVAL; - goto out_free; - } - break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n", @@ -474,6 +457,8 @@ static int dvb_init(struct em28xx *dev) result = -EINVAL; goto out_free; } + /* define general-purpose callback pointer */ + dvb->frontend->callback = em28xx_tuner_callback; /* register everything */ result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 97853384c94..3bab56b997f 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -143,10 +143,11 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr) } for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0; write_timeout -= 5) { - unsigned msg = dev->em28xx_read_reg(dev, 0x5); - if (msg == 0x94) + unsigned reg = dev->em28xx_read_reg(dev, 0x5); + + if (reg == 0x94) return -ENODEV; - else if (msg == 0x84) + else if (reg == 0x84) return 0; msleep(5); } @@ -335,8 +336,11 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client, &buf, 0); - if (err < 0) - return -1; + if (err < 0) { + em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n", + __func__, err); + return err; + } buf = 0; @@ -344,7 +348,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) if (err != 1) { printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", dev->name, err); - return -1; + return err; } while (size > 0) { if (size > 16) @@ -357,7 +361,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) printk(KERN_WARNING "%s: i2c eeprom read error (err=%d)\n", dev->name, err); - return -1; + return err; } size -= block; p += block; @@ -585,18 +589,31 @@ void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg) */ int em28xx_i2c_register(struct em28xx *dev) { + int retval; + BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg); BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req); dev->i2c_adap = em28xx_adap_template; dev->i2c_adap.dev.parent = &dev->udev->dev; strcpy(dev->i2c_adap.name, dev->name); dev->i2c_adap.algo_data = dev; - i2c_add_adapter(&dev->i2c_adap); + + retval = i2c_add_adapter(&dev->i2c_adap); + if (retval < 0) { + em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n", + __func__, retval); + return retval; + } dev->i2c_client = em28xx_client_template; dev->i2c_client.adapter = &dev->i2c_adap; - em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); + retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); + if (retval < 0) { + em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n", + __func__, retval); + return retval; + } if (i2c_scan) em28xx_do_i2c_scan(dev); diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 49ab0629702..c53649e5315 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -513,10 +513,17 @@ static struct videobuf_queue_ops em28xx_video_qops = { */ static int em28xx_config(struct em28xx *dev) { + int retval; /* Sets I2C speed to 100 KHz */ - if (!dev->is_em2800) - em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + if (!dev->is_em2800) { + retval = em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + if (retval < 0) { + em28xx_errdev("%s: em28xx_write_regs_req failed! retval [%d]\n", + __func__, retval); + return retval; + } + } /* enable vbi capturing */ @@ -1512,6 +1519,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) struct em28xx_fh *fh; enum v4l2_buf_type fh_type = 0; + lock_kernel(); list_for_each_entry(h, &em28xx_devlist, devlist) { if (h->vdev->minor == minor) { dev = h; @@ -1527,8 +1535,10 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev = h; } } - if (NULL == dev) + if (NULL == dev) { + unlock_kernel(); return -ENODEV; + } em28xx_videodbg("open minor=%d type=%s users=%d\n", minor, v4l2_type_names[fh_type], dev->users); @@ -1537,6 +1547,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); + unlock_kernel(); return -ENOMEM; } mutex_lock(&dev->lock); @@ -1573,6 +1584,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); + unlock_kernel(); return errCode; } @@ -1588,8 +1600,7 @@ static void em28xx_release_resources(struct em28xx *dev) /*FIXME: I2C IR should be disconnected */ em28xx_info("V4L2 devices /dev/video%d and /dev/vbi%d deregistered\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, - dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); + dev->vdev->num, dev->vbi_dev->num); list_del(&dev->devlist); if (dev->sbutton_input_dev) em28xx_deregister_snapshot_button(dev); @@ -1948,13 +1959,23 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, } /* register i2c bus */ - em28xx_i2c_register(dev); + errCode = em28xx_i2c_register(dev); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n", + __func__, errCode); + return errCode; + } /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); /* Configure audio */ - em28xx_audio_analog_set(dev); + errCode = em28xx_audio_analog_set(dev); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_audio_analog_set - errCode [%d]!\n", + __func__, errCode); + return errCode; + } /* configure the device */ em28xx_config_i2c(dev); @@ -1974,6 +1995,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->ctl_input = 2; errCode = em28xx_config(dev); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_config - errCode [%d]!\n", + __func__, errCode); + return errCode; + } list_add_tail(&dev->devlist, &em28xx_devlist); @@ -2026,17 +2052,27 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, if (dev->has_msp34xx) { /* Send a reset to other chips via gpio */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1); + errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(1) failed! errCode [%d]\n", + __func__, errCode); + return errCode; + } msleep(3); - em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1); + + errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(2) failed! errCode [%d]\n", + __func__, errCode); + return errCode; + } msleep(3); } video_mux(dev, 0); em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, - dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); + dev->vdev->num, dev->vbi_dev->num); mutex_lock(&em28xx_extension_devlist_lock); if (!list_empty(&em28xx_extension_devlist)) { @@ -2236,7 +2272,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) em28xx_warn ("device /dev/video%d is open! Deregistration and memory " "deallocation are deferred on close.\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN); + dev->vdev->num); dev->state |= DEV_MISCONFIGURED; em28xx_uninit_isoc(dev); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 9a331074868..82781178e0a 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -411,8 +411,8 @@ struct em28xx { /* frame properties */ int width; /* current frame width */ int height; /* current frame height */ - int hscale; /* horizontal scale factor (see datasheet) */ - int vscale; /* vertical scale factor (see datasheet) */ + unsigned hscale; /* horizontal scale factor (see datasheet) */ + unsigned vscale; /* vertical scale factor (see datasheet) */ int interlaced; /* 1=interlace fileds, 0=just top fileds */ unsigned int video_bytesread; /* Number of bytes read */ @@ -528,7 +528,7 @@ extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); -int em28xx_tuner_callback(void *ptr, int command, int arg); +int em28xx_tuner_callback(void *ptr, int component, int command, int arg); /* Provided by em28xx-input.c */ /* TODO: Check if the standard get_key handlers on ir-common can be used */ diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 8db2a05bf9c..7a85c41b0ee 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -1214,7 +1214,7 @@ static int et61x251_open(struct inode* inode, struct file* filp) if (!down_read_trylock(&et61x251_dev_lock)) return -ERESTARTSYS; - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); if (wait_for_completion_interruptible(&cam->probe)) { up_read(&et61x251_dev_lock); @@ -1297,7 +1297,7 @@ static int et61x251_release(struct inode* inode, struct file* filp) down_write(&et61x251_dev_lock); - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); et61x251_stop_transfer(cam); et61x251_release_buffers(cam); @@ -1318,7 +1318,7 @@ static ssize_t et61x251_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); struct et61x251_frame_t* f, * i; unsigned long lock_flags; long timeout; @@ -1426,7 +1426,7 @@ exit: static unsigned int et61x251_poll(struct file *filp, poll_table *wait) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); struct et61x251_frame_t* f; unsigned long lock_flags; unsigned int mask = 0; @@ -1502,7 +1502,7 @@ static struct vm_operations_struct et61x251_vm_ops = { static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; void *pos; @@ -2395,7 +2395,7 @@ et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg) static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp, unsigned int cmd, void __user * arg) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); switch (cmd) { @@ -2490,7 +2490,7 @@ static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp, static int et61x251_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); int err = 0; if (mutex_lock_interruptible(&cam->fileop_mutex)) diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 42b90742b40..4d0817471c9 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -1,13 +1,212 @@ -config USB_GSPCA - tristate "USB GSPCA driver" +menuconfig USB_GSPCA + tristate "GSPCA based webcams" depends on VIDEO_V4L2 + default m ---help--- - Say Y here if you want support for various USB webcams. + Say Y here if you want to enable selecting webcams based + on the GSPCA framework. - See <file:Documentation/video4linux/gspca.txt> for more info. + See <file:Documentation/video4linux/gspca.txt> for more info. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. - To compile this driver as modules, choose M here: the - modules will be called gspca_xxxx. + To compile this driver as modules, choose M here: the + modules will be called gspca_main. + + +if USB_GSPCA && VIDEO_V4L2 + +source "drivers/media/video/gspca/m5602/Kconfig" + +config USB_GSPCA_CONEX + tristate "Conexant Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Conexant chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_conex. + +config USB_GSPCA_ETOMS + tristate "Etoms USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Etoms chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_etoms. + +config USB_GSPCA_FINEPIX + tristate "Fujifilm FinePix USB V4L2 driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the FinePix chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_finepix. + +config USB_GSPCA_MARS + tristate "Mars USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Mars chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_mars. + +config USB_GSPCA_OV519 + tristate "OV519 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the OV519 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_ov519. + +config USB_GSPCA_PAC207 + tristate "Pixart PAC207 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the PAC207 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_pac207. + +config USB_GSPCA_PAC7311 + tristate "Pixart PAC7311 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the PAC7311 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_pac7311. + +config USB_GSPCA_SONIXB + tristate "SN9C102 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SONIXB chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_sonixb. + +config USB_GSPCA_SONIXJ + tristate "SONIX JPEG USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SONIXJ chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_sonixj + +config USB_GSPCA_SPCA500 + tristate "SPCA500 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA500 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca500. + +config USB_GSPCA_SPCA501 + tristate "SPCA501 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA501 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca501. + +config USB_GSPCA_SPCA505 + tristate "SPCA505 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA505 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca505. + +config USB_GSPCA_SPCA506 + tristate "SPCA506 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA506 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca506. + +config USB_GSPCA_SPCA508 + tristate "SPCA508 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA508 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca508. + +config USB_GSPCA_SPCA561 + tristate "SPCA561 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA561 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca561. + +config USB_GSPCA_STK014 + tristate "Syntek DV4000 (STK014) USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the STK014 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_stk014. + +config USB_GSPCA_SUNPLUS + tristate "SUNPLUS USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Sunplus + SPCA504(abc) SPCA533 SPCA536 chips. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca5xx. + +config USB_GSPCA_T613 + tristate "T613 (JPEG Compliance) USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the T613 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_t613. + +config USB_GSPCA_TV8532 + tristate "TV8532 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the TV8531 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_tv8532. + +config USB_GSPCA_VC032X + tristate "VC032X USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the VC032X chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_vc032x. + +config USB_GSPCA_ZC3XX + tristate "VC3xx USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the ZC3XX chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_zc3xx. + +endif diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index e68a8965297..22734f5a6c3 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -1,29 +1,48 @@ -obj-$(CONFIG_USB_GSPCA) += gspca_main.o \ - gspca_conex.o gspca_etoms.o gspca_mars.o \ - gspca_ov519.o gspca_pac207.o gspca_pac7311.o \ - gspca_sonixb.o gspca_sonixj.o gspca_spca500.o gspca_spca501.o \ - gspca_spca505.o gspca_spca506.o gspca_spca508.o gspca_spca561.o \ - gspca_sunplus.o gspca_stk014.o gspca_t613.o gspca_tv8532.o \ - gspca_vc032x.o gspca_zc3xx.o +obj-$(CONFIG_USB_GSPCA) += gspca_main.o +obj-$(CONFIG_USB_GSPCA_CONEX) += gspca_conex.o +obj-$(CONFIG_USB_GSPCA_ETOMS) += gspca_etoms.o +obj-$(CONFIG_USB_GSPCA_FINEPIX) += gspca_finepix.o +obj-$(CONFIG_USB_GSPCA_MARS) += gspca_mars.o +obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o +obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o +obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o +obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o +obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o +obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o +obj-$(CONFIG_USB_GSPCA_SPCA501) += gspca_spca501.o +obj-$(CONFIG_USB_GSPCA_SPCA505) += gspca_spca505.o +obj-$(CONFIG_USB_GSPCA_SPCA506) += gspca_spca506.o +obj-$(CONFIG_USB_GSPCA_SPCA508) += gspca_spca508.o +obj-$(CONFIG_USB_GSPCA_SPCA561) += gspca_spca561.o +obj-$(CONFIG_USB_GSPCA_SUNPLUS) += gspca_sunplus.o +obj-$(CONFIG_USB_GSPCA_STK014) += gspca_stk014.o +obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o +obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o +obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o +obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o + +gspca_main-objs := gspca.o +gspca_conex-objs := conex.o +gspca_etoms-objs := etoms.o +gspca_finepix-objs := finepix.o +gspca_mars-objs := mars.o +gspca_ov519-objs := ov519.o +gspca_pac207-objs := pac207.o +gspca_pac7311-objs := pac7311.o +gspca_sonixb-objs := sonixb.o +gspca_sonixj-objs := sonixj.o +gspca_spca500-objs := spca500.o +gspca_spca501-objs := spca501.o +gspca_spca505-objs := spca505.o +gspca_spca506-objs := spca506.o +gspca_spca508-objs := spca508.o +gspca_spca561-objs := spca561.o +gspca_stk014-objs := stk014.o +gspca_sunplus-objs := sunplus.o +gspca_t613-objs := t613.o +gspca_tv8532-objs := tv8532.o +gspca_vc032x-objs := vc032x.o +gspca_zc3xx-objs := zc3xx.o + +obj-$(CONFIG_USB_M5602) += m5602/ -gspca_main-objs := gspca.o -gspca_conex-objs := conex.o -gspca_etoms-objs := etoms.o -gspca_mars-objs := mars.o -gspca_ov519-objs := ov519.o -gspca_pac207-objs := pac207.o -gspca_pac7311-objs := pac7311.o -gspca_sonixb-objs := sonixb.o -gspca_sonixj-objs := sonixj.o -gspca_spca500-objs := spca500.o -gspca_spca501-objs := spca501.o -gspca_spca505-objs := spca505.o -gspca_spca506-objs := spca506.o -gspca_spca508-objs := spca508.o -gspca_spca561-objs := spca561.o -gspca_stk014-objs := stk014.o -gspca_sunplus-objs := sunplus.o -gspca_t613-objs := t613.o -gspca_tv8532-objs := tv8532.o -gspca_vc032x-objs := vc032x.o -gspca_zc3xx-objs := zc3xx.o diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 4d9f4cc255a..a9d51ba7c57 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -837,12 +837,13 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { cx11646_initsize(gspca_dev); cx11646_fw(gspca_dev); cx_sensor(gspca_dev); cx11646_jpeg(gspca_dev); + return 0; } static void sd_stop0(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index 4ff0e386914..3be30b420a2 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -691,7 +691,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -704,6 +704,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev, ET_RESET_ALL, 0x08); et_video(gspca_dev, 1); /* video on */ + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c new file mode 100644 index 00000000000..65d3cbfe6b2 --- /dev/null +++ b/drivers/media/video/gspca/finepix.c @@ -0,0 +1,466 @@ +/* + * Fujifilm Finepix subdriver + * + * Copyright (C) 2008 Frank Zago + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "finepix" + +#include "gspca.h" + +MODULE_AUTHOR("Frank Zago <frank@zago.net>"); +MODULE_DESCRIPTION("Fujifilm FinePix USB V4L2 driver"); +MODULE_LICENSE("GPL"); + +/* Default timeout, in ms */ +#define FPIX_TIMEOUT (HZ / 10) + +/* Maximum transfer size to use. The windows driver reads by chunks of + * 0x2000 bytes, so do the same. Note: reading more seems to work + * too. */ +#define FPIX_MAX_TRANSFER 0x2000 + +/* Structure to hold all of our device specific stuff */ +struct usb_fpix { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + /* + * USB stuff + */ + struct usb_ctrlrequest ctrlreq; + struct urb *control_urb; + struct timer_list bulk_timer; + + enum { + FPIX_NOP, /* inactive, else streaming */ + FPIX_RESET, /* must reset */ + FPIX_REQ_FRAME, /* requesting a frame */ + FPIX_READ_FRAME, /* reading frame */ + } state; + + /* + * Driver stuff + */ + struct delayed_work wqe; + struct completion can_close; + int streaming; +}; + +/* Delay after which claim the next frame. If the delay is too small, + * the camera will return old frames. On the 4800Z, 20ms is bad, 25ms + * will fail every 4 or 5 frames, but 30ms is perfect. */ +#define NEXT_FRAME_DELAY (((HZ * 30) + 999) / 1000) + +#define dev_new_state(new_state) { \ + PDEBUG(D_STREAM, "new state from %d to %d at %s:%d", \ + dev->state, new_state, __func__, __LINE__); \ + dev->state = new_state; \ +} + +/* These cameras only support 320x200. */ +static struct v4l2_pix_format fpix_mode[1] = { + { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0} +}; + +/* Reads part of a frame */ +static void read_frame_part(struct usb_fpix *dev) +{ + int ret; + + PDEBUG(D_STREAM, "read_frame_part"); + + /* Reads part of a frame */ + ret = usb_submit_urb(dev->gspca_dev.urb[0], GFP_ATOMIC); + if (ret) { + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + PDEBUG(D_STREAM, "usb_submit_urb failed with %d", + ret); + } else { + /* Sometimes we never get a callback, so use a timer. + * Is this masking a bug somewhere else? */ + dev->bulk_timer.expires = jiffies + msecs_to_jiffies(150); + add_timer(&dev->bulk_timer); + } +} + +/* Callback for URBs. */ +static void urb_callback(struct urb *urb) +{ + struct gspca_dev *gspca_dev = urb->context; + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + PDEBUG(D_PACK, + "enter urb_callback - status=%d, length=%d", + urb->status, urb->actual_length); + + if (dev->state == FPIX_READ_FRAME) + del_timer(&dev->bulk_timer); + + if (urb->status != 0) { + /* We kill a stuck urb every 50 frames on average, so don't + * display a log message for that. */ + if (urb->status != -ECONNRESET) + PDEBUG(D_STREAM, "bad URB status %d", urb->status); + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + } + + switch (dev->state) { + case FPIX_REQ_FRAME: + dev_new_state(FPIX_READ_FRAME); + read_frame_part(dev); + break; + + case FPIX_READ_FRAME: { + unsigned char *data = urb->transfer_buffer; + struct gspca_frame *frame; + + frame = gspca_get_i_frame(&dev->gspca_dev); + if (frame == NULL) + gspca_dev->last_packet_type = DISCARD_PACKET; + if (urb->actual_length < FPIX_MAX_TRANSFER || + (data[urb->actual_length-2] == 0xff && + data[urb->actual_length-1] == 0xd9)) { + + /* If the result is less than what was asked + * for, then it's the end of the + * frame. Sometime the jpeg is not complete, + * but there's nothing we can do. We also end + * here if the the jpeg ends right at the end + * of the frame. */ + if (frame) + gspca_frame_add(gspca_dev, LAST_PACKET, + frame, + data, urb->actual_length); + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, NEXT_FRAME_DELAY); + } else { + + /* got a partial image */ + if (frame) + gspca_frame_add(gspca_dev, + gspca_dev->last_packet_type + == LAST_PACKET + ? FIRST_PACKET : INTER_PACKET, + frame, + data, urb->actual_length); + read_frame_part(dev); + } + break; + } + + case FPIX_NOP: + case FPIX_RESET: + PDEBUG(D_STREAM, "invalid state %d", dev->state); + break; + } +} + +/* Request a new frame */ +static void request_frame(struct usb_fpix *dev) +{ + int ret; + struct gspca_dev *gspca_dev = &dev->gspca_dev; + + /* Setup command packet */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xd3; + gspca_dev->usb_buf[7] = 0x01; + + /* Request a frame */ + dev->ctrlreq.bRequestType = + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + dev->ctrlreq.bRequest = USB_REQ_GET_STATUS; + dev->ctrlreq.wValue = 0; + dev->ctrlreq.wIndex = 0; + dev->ctrlreq.wLength = cpu_to_le16(12); + + usb_fill_control_urb(dev->control_urb, + gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + (unsigned char *) &dev->ctrlreq, + gspca_dev->usb_buf, + 12, urb_callback, gspca_dev); + + ret = usb_submit_urb(dev->control_urb, GFP_ATOMIC); + if (ret) { + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + PDEBUG(D_STREAM, "usb_submit_urb failed with %d", ret); + } +} + +/*--------------------------------------------------------------------------*/ + +/* State machine. */ +static void fpix_sm(struct work_struct *work) +{ + struct usb_fpix *dev = container_of(work, struct usb_fpix, wqe.work); + + PDEBUG(D_STREAM, "fpix_sm state %d", dev->state); + + /* verify that the device wasn't unplugged */ + if (!dev->gspca_dev.present) { + PDEBUG(D_STREAM, "device is gone"); + dev_new_state(FPIX_NOP); + complete(&dev->can_close); + return; + } + + if (!dev->streaming) { + PDEBUG(D_STREAM, "stopping state machine"); + dev_new_state(FPIX_NOP); + complete(&dev->can_close); + return; + } + + switch (dev->state) { + case FPIX_RESET: + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, HZ / 10); + break; + + case FPIX_REQ_FRAME: + /* get an image */ + request_frame(dev); + break; + + case FPIX_NOP: + case FPIX_READ_FRAME: + PDEBUG(D_STREAM, "invalid state %d", dev->state); + break; + } +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + + cam->cam_mode = fpix_mode; + cam->nmodes = 1; + cam->epaddr = 0x01; /* todo: correct for all cams? */ + cam->bulk_size = FPIX_MAX_TRANSFER; + +/* gspca_dev->nbalt = 1; * use bulk transfer */ + return 0; +} + +/* Stop streaming and free the ressources allocated by sd_start. */ +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + dev->streaming = 0; + + /* Stop the state machine */ + if (dev->state != FPIX_NOP) + wait_for_completion(&dev->can_close); + + usb_free_urb(dev->control_urb); + dev->control_urb = NULL; +} + +/* Kill an URB that hasn't completed. */ +static void timeout_kill(unsigned long data) +{ + struct urb *urb = (struct urb *) data; + + usb_unlink_urb(urb); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + INIT_DELAYED_WORK(&dev->wqe, fpix_sm); + + init_timer(&dev->bulk_timer); + dev->bulk_timer.function = timeout_kill; + + return 0; +} + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + int ret; + int size_ret; + + /* Reset bulk in endpoint */ + usb_clear_halt(gspca_dev->dev, gspca_dev->cam.epaddr); + + /* Init the device */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xc6; + gspca_dev->usb_buf[8] = 0x20; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf, + 12, FPIX_TIMEOUT); + + if (ret != 12) { + PDEBUG(D_STREAM, "usb_control_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Read the result of the command. Ignore the result, for it + * varies with the device. */ + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, + gspca_dev->cam.epaddr), + gspca_dev->usb_buf, FPIX_MAX_TRANSFER, &size_ret, + FPIX_TIMEOUT); + if (ret != 0) { + PDEBUG(D_STREAM, "usb_bulk_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Request a frame, but don't read it */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xd3; + gspca_dev->usb_buf[7] = 0x01; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf, + 12, FPIX_TIMEOUT); + if (ret != 12) { + PDEBUG(D_STREAM, "usb_control_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Again, reset bulk in endpoint */ + usb_clear_halt(gspca_dev->dev, gspca_dev->cam.epaddr); + + /* Allocate a control URB */ + dev->control_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->control_urb) { + PDEBUG(D_STREAM, "No free urbs available"); + ret = -EIO; + goto error; + } + + /* Various initializations. */ + init_completion(&dev->can_close); + dev->bulk_timer.data = (unsigned long)dev->gspca_dev.urb[0]; + dev->gspca_dev.urb[0]->complete = urb_callback; + dev->streaming = 1; + + /* Schedule a frame request. */ + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, 1); + + return 0; + +error: + /* Free the ressources */ + sd_stopN(gspca_dev); + return ret; +} + +/* Table of supported USB devices */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x04cb, 0x0104)}, + {USB_DEVICE(0x04cb, 0x0109)}, + {USB_DEVICE(0x04cb, 0x010b)}, + {USB_DEVICE(0x04cb, 0x010f)}, + {USB_DEVICE(0x04cb, 0x0111)}, + {USB_DEVICE(0x04cb, 0x0113)}, + {USB_DEVICE(0x04cb, 0x0115)}, + {USB_DEVICE(0x04cb, 0x0117)}, + {USB_DEVICE(0x04cb, 0x0119)}, + {USB_DEVICE(0x04cb, 0x011b)}, + {USB_DEVICE(0x04cb, 0x011d)}, + {USB_DEVICE(0x04cb, 0x0121)}, + {USB_DEVICE(0x04cb, 0x0123)}, + {USB_DEVICE(0x04cb, 0x0125)}, + {USB_DEVICE(0x04cb, 0x0127)}, + {USB_DEVICE(0x04cb, 0x0129)}, + {USB_DEVICE(0x04cb, 0x012b)}, + {USB_DEVICE(0x04cb, 0x012d)}, + {USB_DEVICE(0x04cb, 0x012f)}, + {USB_DEVICE(0x04cb, 0x0131)}, + {USB_DEVICE(0x04cb, 0x013b)}, + {USB_DEVICE(0x04cb, 0x013d)}, + {USB_DEVICE(0x04cb, 0x013f)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct usb_fpix), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index ac95c55887d..e48fbfc8ad0 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -21,6 +21,7 @@ #define MODULE_NAME "gspca" #include <linux/init.h> +#include <linux/version.h> #include <linux/fs.h> #include <linux/vmalloc.h> #include <linux/sched.h> @@ -29,6 +30,7 @@ #include <linux/string.h> #include <linux/pagemap.h> #include <linux/io.h> +#include <linux/kref.h> #include <asm/page.h> #include <linux/uaccess.h> #include <linux/jiffies.h> @@ -43,7 +45,7 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); MODULE_DESCRIPTION("GSPCA USB Camera Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 2, 0) +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 3, 0) static int video_nr = -1; @@ -102,6 +104,22 @@ static struct vm_operations_struct gspca_vm_ops = { .close = gspca_vm_close, }; +/* get the current input frame buffer */ +struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev) +{ + struct gspca_frame *frame; + int i; + + i = gspca_dev->fr_i; + i = gspca_dev->fr_queue[i]; + frame = &gspca_dev->frame[i]; + if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) + != V4L2_BUF_FLAG_QUEUED) + return NULL; + return frame; +} +EXPORT_SYMBOL(gspca_get_i_frame); + /* * fill a video frame from an URB and resubmit */ @@ -110,7 +128,7 @@ static void fill_frame(struct gspca_dev *gspca_dev, { struct gspca_frame *frame; __u8 *data; /* address of data in the iso message */ - int i, j, len, st; + int i, len, st; cam_pkt_op pkt_scan; if (urb->status != 0) { @@ -124,11 +142,8 @@ static void fill_frame(struct gspca_dev *gspca_dev, for (i = 0; i < urb->number_of_packets; i++) { /* check the availability of the frame buffer */ - j = gspca_dev->fr_i; - j = gspca_dev->fr_queue[j]; - frame = &gspca_dev->frame[j]; - if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) - != V4L2_BUF_FLAG_QUEUED) { + frame = gspca_get_i_frame(gspca_dev); + if (!frame) { gspca_dev->last_packet_type = DISCARD_PACKET; break; } @@ -178,6 +193,39 @@ static void isoc_irq(struct urb *urb } /* + * bulk message interrupt from the USB device + */ +static void bulk_irq(struct urb *urb +) +{ + struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; + struct gspca_frame *frame; + + PDEBUG(D_PACK, "bulk irq"); + if (!gspca_dev->streaming) + return; + if (urb->status != 0 && urb->status != -ECONNRESET) { +#ifdef CONFIG_PM + if (!gspca_dev->frozen) +#endif + PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status); + return; /* disconnection ? */ + } + + /* check the availability of the frame buffer */ + frame = gspca_get_i_frame(gspca_dev); + if (!frame) { + gspca_dev->last_packet_type = DISCARD_PACKET; + } else { + PDEBUG(D_PACK, "packet l:%d", urb->actual_length); + gspca_dev->sd_desc->pkt_scan(gspca_dev, + frame, + urb->transfer_buffer, + urb->actual_length); + } +} + +/* * add data to the current frame * * This function is called by the subdrivers at interrupt level. @@ -190,7 +238,7 @@ static void isoc_irq(struct urb *urb * On LAST_PACKET, a new frame is returned. */ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, - int packet_type, + enum gspca_packet_type packet_type, struct gspca_frame *frame, const __u8 *data, int len) @@ -232,7 +280,7 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, } gspca_dev->last_packet_type = packet_type; - /* if last packet, wake the application and advance in the queue */ + /* if last packet, wake up the application and advance in the queue */ if (packet_type == LAST_PACKET) { frame->v4l2_buf.bytesused = frame->data_end - frame->data; frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_QUEUED; @@ -270,7 +318,6 @@ static void *rvmalloc(unsigned long size) void *mem; unsigned long adr; -/* size = PAGE_ALIGN(size); (already done) */ mem = vmalloc_32(size); if (mem != NULL) { adr = (unsigned long) mem; @@ -357,7 +404,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) unsigned int i; PDEBUG(D_STREAM, "kill transfer"); - for (i = 0; i < MAX_NURBS; ++i) { + for (i = 0; i < MAX_NURBS; i++) { urb = gspca_dev->urb[i]; if (urb == NULL) break; @@ -374,10 +421,11 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) } /* - * search an input isochronous endpoint in an alternate setting + * look for an input transfer endpoint in an alternate setting */ -static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt, - __u8 epaddr) +static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt, + __u8 epaddr, + __u8 xfer) { struct usb_host_endpoint *ep; int i, attr; @@ -388,7 +436,7 @@ static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt, if (ep->desc.bEndpointAddress == epaddr) { attr = ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (attr == USB_ENDPOINT_XFER_ISOC) + if (attr == xfer) return ep; break; } @@ -397,14 +445,14 @@ static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt, } /* - * search an input isochronous endpoint + * look for an input (isoc or bulk) endpoint * * The endpoint is defined by the subdriver. * Use only the first isoc (some Zoran - 0x0572:0x0001 - have two such ep). * This routine may be called many times when the bandwidth is too small * (the bandwidth is checked on urb submit). */ -static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev) +static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev) { struct usb_interface *intf; struct usb_host_endpoint *ep; @@ -413,28 +461,41 @@ static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev) intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); ep = NULL; i = gspca_dev->alt; /* previous alt setting */ + + /* try isoc */ while (--i > 0) { /* alt 0 is unusable */ - ep = alt_isoc(&intf->altsetting[i], gspca_dev->cam.epaddr); + ep = alt_xfer(&intf->altsetting[i], + gspca_dev->cam.epaddr, + USB_ENDPOINT_XFER_ISOC); if (ep) break; } + + /* if no isoc, try bulk */ if (ep == NULL) { - err("no ISOC endpoint found"); - return NULL; + ep = alt_xfer(&intf->altsetting[0], + gspca_dev->cam.epaddr, + USB_ENDPOINT_XFER_BULK); + if (ep == NULL) { + err("no transfer endpoint found"); + return NULL; + } } - PDEBUG(D_STREAM, "use ISOC alt %d ep 0x%02x", + PDEBUG(D_STREAM, "use alt %d ep 0x%02x", i, ep->desc.bEndpointAddress); - ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i); - if (ret < 0) { - err("set interface err %d", ret); - return NULL; + if (i > 0) { + ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i); + if (ret < 0) { + err("set interface err %d", ret); + return NULL; + } } gspca_dev->alt = i; /* memorize the current alt setting */ return ep; } /* - * create the isochronous URBs + * create the URBs for image transfer */ static int create_urbs(struct gspca_dev *gspca_dev, struct usb_host_endpoint *ep) @@ -445,15 +506,27 @@ static int create_urbs(struct gspca_dev *gspca_dev, /* calculate the packet size and the number of packets */ psize = le16_to_cpu(ep->desc.wMaxPacketSize); - /* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */ - psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); - npkt = ISO_MAX_SIZE / psize; - if (npkt > ISO_MAX_PKT) - npkt = ISO_MAX_PKT; - bsize = psize * npkt; - PDEBUG(D_STREAM, - "isoc %d pkts size %d (bsize:%d)", npkt, psize, bsize); - nurbs = DEF_NURBS; + if (gspca_dev->alt != 0) { /* isoc */ + + /* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */ + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + npkt = ISO_MAX_SIZE / psize; + if (npkt > ISO_MAX_PKT) + npkt = ISO_MAX_PKT; + bsize = psize * npkt; + PDEBUG(D_STREAM, + "isoc %d pkts size %d = bsize:%d", + npkt, psize, bsize); + nurbs = DEF_NURBS; + } else { /* bulk */ + npkt = 0; + bsize = gspca_dev->cam. bulk_size; + if (bsize == 0) + bsize = psize; + PDEBUG(D_STREAM, "bulk bsize:%d", bsize); + nurbs = 1; + } + gspca_dev->nurbs = nurbs; for (n = 0; n < nurbs; n++) { urb = usb_alloc_urb(npkt, GFP_KERNEL); @@ -476,17 +549,24 @@ static int create_urbs(struct gspca_dev *gspca_dev, gspca_dev->urb[n] = urb; urb->dev = gspca_dev->dev; urb->context = gspca_dev; - urb->pipe = usb_rcvisocpipe(gspca_dev->dev, - ep->desc.bEndpointAddress); - urb->transfer_flags = URB_ISO_ASAP - | URB_NO_TRANSFER_DMA_MAP; - urb->interval = ep->desc.bInterval; - urb->complete = isoc_irq; - urb->number_of_packets = npkt; urb->transfer_buffer_length = bsize; - for (i = 0; i < npkt; i++) { - urb->iso_frame_desc[i].length = psize; - urb->iso_frame_desc[i].offset = psize * i; + if (npkt != 0) { /* ISOC */ + urb->pipe = usb_rcvisocpipe(gspca_dev->dev, + ep->desc.bEndpointAddress); + urb->transfer_flags = URB_ISO_ASAP + | URB_NO_TRANSFER_DMA_MAP; + urb->interval = ep->desc.bInterval; + urb->complete = isoc_irq; + urb->number_of_packets = npkt; + for (i = 0; i < npkt; i++) { + urb->iso_frame_desc[i].length = psize; + urb->iso_frame_desc[i].offset = psize * i; + } + } else { /* bulk */ + urb->pipe = usb_rcvbulkpipe(gspca_dev->dev, + ep->desc.bEndpointAddress), + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + urb->complete = bulk_irq; } } return 0; @@ -508,7 +588,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) gspca_dev->alt = gspca_dev->nbalt; for (;;) { PDEBUG(D_STREAM, "init transfer alt %d", gspca_dev->alt); - ep = get_isoc_ep(gspca_dev); + ep = get_ep(gspca_dev); if (ep == NULL) { ret = -EIO; goto out; @@ -518,10 +598,18 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) goto out; /* start the cam */ - gspca_dev->sd_desc->start(gspca_dev); + ret = gspca_dev->sd_desc->start(gspca_dev); + if (ret < 0) { + destroy_urbs(gspca_dev); + goto out; + } gspca_dev->streaming = 1; atomic_set(&gspca_dev->nevent, 0); + /* bulk transfers are started by the subdriver */ + if (gspca_dev->alt == 0) + break; + /* submit the URBs */ for (n = 0; n < gspca_dev->nurbs; n++) { ret = usb_submit_urb(gspca_dev->urb[n], GFP_KERNEL); @@ -553,7 +641,7 @@ static int gspca_set_alt0(struct gspca_dev *gspca_dev) return ret; } -/* Note both the queue and the usb lock should be hold when calling this */ +/* Note: both the queue and the usb locks should be held when calling this */ static void gspca_stream_off(struct gspca_dev *gspca_dev) { gspca_dev->streaming = 0; @@ -759,6 +847,16 @@ out: return ret; } +static void gspca_delete(struct kref *kref) +{ + struct gspca_dev *gspca_dev = container_of(kref, struct gspca_dev, kref); + + PDEBUG(D_STREAM, "device deleted"); + + kfree(gspca_dev->usb_buf); + kfree(gspca_dev); +} + static int dev_open(struct inode *inode, struct file *file) { struct gspca_dev *gspca_dev; @@ -778,13 +876,19 @@ static int dev_open(struct inode *inode, struct file *file) goto out; } gspca_dev->users++; + + /* one more user */ + kref_get(&gspca_dev->kref); + file->private_data = gspca_dev; #ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) - gspca_dev->vdev.debug |= 3; + gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL + | V4L2_DEBUG_IOCTL_ARG; else - gspca_dev->vdev.debug &= ~3; + gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL + | V4L2_DEBUG_IOCTL_ARG); #endif ret = 0; out: @@ -818,7 +922,11 @@ static int dev_close(struct inode *inode, struct file *file) } file->private_data = NULL; mutex_unlock(&gspca_dev->queue_lock); + PDEBUG(D_STREAM, "close done"); + + kref_put(&gspca_dev->kref, gspca_delete); + return 0; } @@ -829,7 +937,6 @@ static int vidioc_querycap(struct file *file, void *priv, memset(cap, 0, sizeof *cap); strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver); -/* strncpy(cap->card, gspca_dev->cam.dev_name, sizeof cap->card); */ if (gspca_dev->dev->product != NULL) { strncpy(cap->card, gspca_dev->dev->product, sizeof cap->card); @@ -1463,7 +1570,6 @@ static int vidioc_qbuf(struct file *file, void *priv, } frame->v4l2_buf.flags |= V4L2_BUF_FLAG_QUEUED; -/* frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; */ if (frame->v4l2_buf.memory == V4L2_MEMORY_USERPTR) { frame->v4l2_buf.m.userptr = v4l2_buf->m.userptr; @@ -1610,7 +1716,7 @@ static ssize_t dev_read(struct file *file, char __user *data, } /* if the process slept for more than 1 second, - * get anewer frame */ + * get a newer frame */ frame = &gspca_dev->frame[v4l2_buf.index]; if (--n < 0) break; /* avoid infinite loop */ @@ -1728,21 +1834,21 @@ int gspca_dev_probe(struct usb_interface *intf, if (dev_size < sizeof *gspca_dev) dev_size = sizeof *gspca_dev; gspca_dev = kzalloc(dev_size, GFP_KERNEL); - if (gspca_dev == NULL) { + if (!gspca_dev) { err("couldn't kzalloc gspca struct"); - return -EIO; + return -ENOMEM; } + kref_init(&gspca_dev->kref); gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL); if (!gspca_dev->usb_buf) { err("out of memory"); - ret = -EIO; + ret = -ENOMEM; goto out; } gspca_dev->dev = dev; gspca_dev->iface = interface->bInterfaceNumber; gspca_dev->nbalt = intf->num_altsetting; gspca_dev->sd_desc = sd_desc; -/* gspca_dev->users = 0; (done by kzalloc) */ gspca_dev->nbufread = 2; /* configure the subdriver and initialize the USB device */ @@ -1781,8 +1887,7 @@ int gspca_dev_probe(struct usb_interface *intf, PDEBUG(D_PROBE, "probe ok"); return 0; out: - kfree(gspca_dev->usb_buf); - kfree(gspca_dev); + kref_put(&gspca_dev->kref, gspca_delete); return ret; } EXPORT_SYMBOL(gspca_dev_probe); @@ -1797,25 +1902,16 @@ void gspca_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); - if (!gspca_dev) - return; - gspca_dev->present = 0; - mutex_lock(&gspca_dev->queue_lock); - mutex_lock(&gspca_dev->usb_lock); - gspca_dev->streaming = 0; - destroy_urbs(gspca_dev); - mutex_unlock(&gspca_dev->usb_lock); - mutex_unlock(&gspca_dev->queue_lock); - while (gspca_dev->users != 0) { /* wait until fully closed */ - atomic_inc(&gspca_dev->nevent); - wake_up_interruptible(&gspca_dev->wq); /* wake processes */ - schedule(); - } + usb_set_intfdata(intf, NULL); + /* We don't want people trying to open up the device */ video_unregister_device(&gspca_dev->vdev); -/* Free the memory */ - kfree(gspca_dev->usb_buf); - kfree(gspca_dev); + + gspca_dev->present = 0; + gspca_dev->streaming = 0; + + kref_put(&gspca_dev->kref, gspca_delete); + PDEBUG(D_PROBE, "disconnect complete"); } EXPORT_SYMBOL(gspca_disconnect); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index c17625cff9b..1d9dc90b479 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -2,7 +2,6 @@ #define GSPCAV2_H #include <linux/module.h> -#include <linux/version.h> #include <linux/kernel.h> #include <linux/usb.h> #include <linux/videodev2.h> @@ -49,13 +48,14 @@ extern int gspca_debug; } while (0) #define GSPCA_MAX_FRAMES 16 /* maximum number of video frame buffers */ -/* ISOC transfers */ -#define MAX_NURBS 16 /* max number of URBs */ +/* image transfers */ +#define MAX_NURBS 4 /* max number of URBs */ #define ISO_MAX_PKT 32 /* max number of packets in an ISOC transfer */ #define ISO_MAX_SIZE 0x8000 /* max size of one URB buffer (32 Kb) */ /* device information - set at probe time */ struct cam { + int bulk_size; /* buffer size when image transfer by bulk */ struct v4l2_pix_format *cam_mode; /* size nmodes */ char nmodes; __u8 epaddr; @@ -93,7 +93,7 @@ struct sd_desc { /* mandatory operations */ cam_cf_op config; /* called on probe */ cam_op init; /* called on probe and resume */ - cam_v_op start; /* called on stream on */ + cam_op start; /* called on stream on */ cam_pkt_op pkt_scan; /* optional operations */ cam_v_op stopN; /* called on stream off - main alt */ @@ -105,10 +105,12 @@ struct sd_desc { }; /* packet types when moving from iso buf to frame buf */ -#define DISCARD_PACKET 0 -#define FIRST_PACKET 1 -#define INTER_PACKET 2 -#define LAST_PACKET 3 +enum gspca_packet_type { + DISCARD_PACKET, + FIRST_PACKET, + INTER_PACKET, + LAST_PACKET +}; struct gspca_frame { __u8 *data; /* frame buffer */ @@ -121,6 +123,7 @@ struct gspca_dev { struct video_device vdev; /* !! must be the first item */ struct file_operations fops; struct usb_device *dev; + struct kref kref; struct file *capt_file; /* file doing video capture */ struct cam cam; /* device information */ @@ -173,10 +176,11 @@ int gspca_dev_probe(struct usb_interface *intf, struct module *module); void gspca_disconnect(struct usb_interface *intf); struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, - int packet_type, + enum gspca_packet_type packet_type, struct gspca_frame *frame, const __u8 *data, int len); +struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev); #ifdef CONFIG_PM int gspca_suspend(struct usb_interface *intf, pm_message_t message); int gspca_resume(struct usb_interface *intf); diff --git a/drivers/media/video/gspca/m5602/Kconfig b/drivers/media/video/gspca/m5602/Kconfig new file mode 100644 index 00000000000..5a69016ed75 --- /dev/null +++ b/drivers/media/video/gspca/m5602/Kconfig @@ -0,0 +1,11 @@ +config USB_M5602 + tristate "ALi USB m5602 Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the + ALi m5602 connected to various image sensors. + + See <file:Documentation/video4linux/m5602.txt> for more info. + + To compile this driver as a module, choose M here: the + module will be called gspca_m5602. diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile new file mode 100644 index 00000000000..226ab4fc9d6 --- /dev/null +++ b/drivers/media/video/gspca/m5602/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_USB_M5602) += gspca_m5602.o + +gspca_m5602-objs := m5602_core.o \ + m5602_ov9650.o \ + m5602_mt9m111.o \ + m5602_po1030.o \ + m5602_s5k83a.o \ + m5602_s5k4aa.o + +EXTRA_CFLAGS += -Idrivers/media/video/gspca + diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h new file mode 100644 index 00000000000..1a37ae4bc82 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -0,0 +1,143 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_BRIDGE_H_ +#define M5602_BRIDGE_H_ + +#include "gspca.h" + +#define MODULE_NAME "ALi m5602" + +/*****************************************************************************/ + +#define M5602_XB_SENSOR_TYPE 0x00 +#define M5602_XB_SENSOR_CTRL 0x01 +#define M5602_XB_LINE_OF_FRAME_H 0x02 +#define M5602_XB_LINE_OF_FRAME_L 0x03 +#define M5602_XB_PIX_OF_LINE_H 0x04 +#define M5602_XB_PIX_OF_LINE_L 0x05 +#define M5602_XB_VSYNC_PARA 0x06 +#define M5602_XB_HSYNC_PARA 0x07 +#define M5602_XB_TEST_MODE_1 0x08 +#define M5602_XB_TEST_MODE_2 0x09 +#define M5602_XB_SIG_INI 0x0a +#define M5602_XB_DS_PARA 0x0e +#define M5602_XB_TRIG_PARA 0x0f +#define M5602_XB_CLK_PD 0x10 +#define M5602_XB_MCU_CLK_CTRL 0x12 +#define M5602_XB_MCU_CLK_DIV 0x13 +#define M5602_XB_SEN_CLK_CTRL 0x14 +#define M5602_XB_SEN_CLK_DIV 0x15 +#define M5602_XB_AUD_CLK_CTRL 0x16 +#define M5602_XB_AUD_CLK_DIV 0x17 +#define M5602_XB_DEVCTR1 0x41 +#define M5602_XB_EPSETR0 0x42 +#define M5602_XB_EPAFCTR 0x47 +#define M5602_XB_EPBFCTR 0x49 +#define M5602_XB_EPEFCTR 0x4f +#define M5602_XB_TEST_REG 0x53 +#define M5602_XB_ALT2SIZE 0x54 +#define M5602_XB_ALT3SIZE 0x55 +#define M5602_XB_OBSFRAME 0x56 +#define M5602_XB_PWR_CTL 0x59 +#define M5602_XB_ADC_CTRL 0x60 +#define M5602_XB_ADC_DATA 0x61 +#define M5602_XB_MISC_CTRL 0x62 +#define M5602_XB_SNAPSHOT 0x63 +#define M5602_XB_SCRATCH_1 0x64 +#define M5602_XB_SCRATCH_2 0x65 +#define M5602_XB_SCRATCH_3 0x66 +#define M5602_XB_SCRATCH_4 0x67 +#define M5602_XB_I2C_CTRL 0x68 +#define M5602_XB_I2C_CLK_DIV 0x69 +#define M5602_XB_I2C_DEV_ADDR 0x6a +#define M5602_XB_I2C_REG_ADDR 0x6b +#define M5602_XB_I2C_DATA 0x6c +#define M5602_XB_I2C_STATUS 0x6d +#define M5602_XB_GPIO_DAT_H 0x70 +#define M5602_XB_GPIO_DAT_L 0x71 +#define M5602_XB_GPIO_DIR_H 0x72 +#define M5602_XB_GPIO_DIR_L 0x73 +#define M5602_XB_GPIO_EN_H 0x74 +#define M5602_XB_GPIO_EN_L 0x75 +#define M5602_XB_GPIO_DAT 0x76 +#define M5602_XB_GPIO_DIR 0x77 +#define M5602_XB_MISC_CTL 0x70 + +#define I2C_BUSY 0x80 + +/*****************************************************************************/ + +/* Driver info */ +#define DRIVER_AUTHOR "ALi m5602 Linux Driver Project" +#define DRIVER_DESC "ALi m5602 webcam driver" + +#define M5602_ISOC_ENDPOINT_ADDR 0x81 +#define M5602_INTR_ENDPOINT_ADDR 0x82 + +#define M5602_MAX_FRAMES 32 +#define M5602_URBS 2 +#define M5602_ISOC_PACKETS 14 + +#define M5602_URB_TIMEOUT msecs_to_jiffies(2 * M5602_ISOC_PACKETS) +#define M5602_URB_MSG_TIMEOUT 5000 +#define M5602_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +/* A skeleton used for sending messages to the m5602 bridge */ +static const unsigned char bridge_urb_skeleton[] = { + 0x13, 0x00, 0x81, 0x00 +}; + +/* A skeleton used for sending messages to the sensor */ +static const unsigned char sensor_urb_skeleton[] = { + 0x23, M5602_XB_GPIO_EN_H, 0x81, 0x06, + 0x23, M5602_XB_MISC_CTRL, 0x81, 0x80, + 0x13, M5602_XB_I2C_DEV_ADDR, 0x81, 0x00, + 0x13, M5602_XB_I2C_REG_ADDR, 0x81, 0x00, + 0x13, M5602_XB_I2C_DATA, 0x81, 0x00, + 0x13, M5602_XB_I2C_CTRL, 0x81, 0x11 +}; + +/* m5602 device descriptor, currently it just wraps the m5602_camera struct */ +struct sd { + struct gspca_dev gspca_dev; + + /* The name of the m5602 camera */ + char *name; + + /* A pointer to the currently connected sensor */ + struct m5602_sensor *sensor; + + struct sd_desc *desc; + + /* The current frame's id, used to detect frame boundaries */ + u8 frame_id; + + /* The current frame count */ + u32 frame_count; +}; + +int m5602_read_bridge( + struct sd *sd, u8 address, u8 *i2c_data); + +int m5602_write_bridge( + struct sd *sd, u8 address, u8 i2c_data); + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c new file mode 100644 index 00000000000..fd6ce384b48 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -0,0 +1,309 @@ + /* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_ov9650.h" +#include "m5602_mt9m111.h" +#include "m5602_po1030.h" +#include "m5602_s5k83a.h" +#include "m5602_s5k4aa.h" + +/* Kernel module parameters */ +int force_sensor; +int dump_bridge; +int dump_sensor; + +static const __devinitdata struct usb_device_id m5602_table[] = { + {USB_DEVICE(0x0402, 0x5602)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, m5602_table); + +/* Reads a byte from the m5602 */ +int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x04, 0xc0, 0x14, + 0x8100 + address, buf, + 1, M5602_URB_MSG_TIMEOUT); + *i2c_data = buf[0]; + + PDEBUG(D_CONF, "Reading bridge register 0x%x containing 0x%x", + address, *i2c_data); + + /* usb_control_msg(...) returns the number of bytes sent upon success, + mask that and return zero upon success instead*/ + return (err < 0) ? err : 0; +} + +/* Writes a byte to to the m5602 */ +int m5602_write_bridge(struct sd *sd, u8 address, u8 i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + PDEBUG(D_CONF, "Writing bridge register 0x%x with 0x%x", + address, i2c_data); + + memcpy(buf, bridge_urb_skeleton, + sizeof(bridge_urb_skeleton)); + buf[1] = address; + buf[3] = i2c_data; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); + + /* usb_control_msg(...) returns the number of bytes sent upon success, + mask that and return zero upon success instead */ + return (err < 0) ? err : 0; +} + +/* Dump all the registers of the m5602 bridge, + unfortunately this breaks the camera until it's power cycled */ +static void m5602_dump_bridge(struct sd *sd) +{ + int i; + for (i = 0; i < 0x80; i++) { + unsigned char val = 0; + m5602_read_bridge(sd, i, &val); + info("ALi m5602 address 0x%x contains 0x%x", i, val); + } + info("Warning: The ALi m5602 webcam probably won't work " + "until it's power cycled"); +} + +static int m5602_probe_sensor(struct sd *sd) +{ + /* Try the po1030 */ + sd->sensor = &po1030; + if (!sd->sensor->probe(sd)) + return 0; + + /* Try the mt9m111 sensor */ + sd->sensor = &mt9m111; + if (!sd->sensor->probe(sd)) + return 0; + + /* Try the s5k4aa */ + sd->sensor = &s5k4aa; + if (!sd->sensor->probe(sd)) + return 0; + + /* Try the ov9650 */ + sd->sensor = &ov9650; + if (!sd->sensor->probe(sd)) + return 0; + + /* Try the s5k83a */ + sd->sensor = &s5k83a; + if (!sd->sensor->probe(sd)) + return 0; + + /* More sensor probe function goes here */ + info("Failed to find a sensor"); + sd->sensor = NULL; + return -ENODEV; +} + +static int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id); + +static int m5602_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int err; + + PDEBUG(D_CONF, "Initializing ALi m5602 webcam"); + /* Run the init sequence */ + err = sd->sensor->init(sd); + + return err; +} + +static int m5602_start_transfer(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 *buf = sd->gspca_dev.usb_buf; + int err; + + /* Send start command to the camera */ + const u8 buffer[4] = {0x13, 0xf9, 0x0f, 0x01}; + memcpy(buf, buffer, sizeof(buffer)); + err = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x04, 0x40, 0x19, 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); + + PDEBUG(D_STREAM, "Transfer started"); + return (err < 0) ? err : 0; +} + +static void m5602_urb_complete(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, + __u8 *data, int len) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (len < 6) { + PDEBUG(D_PACK, "Packet is less than 6 bytes"); + return; + } + + /* Frame delimiter: ff xx xx xx ff ff */ + if (data[0] == 0xff && data[4] == 0xff && data[5] == 0xff && + data[2] != sd->frame_id) { + PDEBUG(D_FRAM, "Frame delimiter detected"); + sd->frame_id = data[2]; + + /* Remove the extra fluff appended on each header */ + data += 6; + len -= 6; + + /* Complete the last frame (if any) */ + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); + sd->frame_count++; + + /* Create a new frame */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); + + PDEBUG(D_FRAM, "Starting new frame %d", + sd->frame_count); + + } else { + int cur_frame_len = frame->data_end - frame->data; + + /* Remove urb header */ + data += 4; + len -= 4; + + if (cur_frame_len + len <= frame->v4l2_buf.length) { + PDEBUG(D_FRAM, "Continuing frame %d copying %d bytes", + sd->frame_count, len); + + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, len); + } else if (frame->v4l2_buf.length - cur_frame_len > 0) { + /* Add the remaining data up to frame size */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, + frame->v4l2_buf.length - cur_frame_len); + } + } +} + +static void m5602_stop_transfer(struct gspca_dev *gspca_dev) +{ + /* Is there are a command to stop a data transfer? */ +} + +/* sub-driver description, the ctrl and nctrl is filled at probe time */ +static struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = m5602_configure, + .init = m5602_init, + .start = m5602_start_transfer, + .stopN = m5602_stop_transfer, + .pkt_scan = m5602_urb_complete +}; + +/* this function is called at probe time */ +static int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + int err; + + cam = &gspca_dev->cam; + cam->epaddr = M5602_ISOC_ENDPOINT_ADDR; + sd->desc = &sd_desc; + + if (dump_bridge) + m5602_dump_bridge(sd); + + /* Probe sensor */ + err = m5602_probe_sensor(sd); + if (err) + goto fail; + + return 0; + +fail: + PDEBUG(D_ERR, "ALi m5602 webcam failed"); + cam->cam_mode = NULL; + cam->nmodes = 0; + + return err; +} + +static int m5602_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = m5602_table, + .probe = m5602_probe, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif + .disconnect = gspca_disconnect +}; + +/* -- module insert / remove -- */ +static int __init mod_m5602_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "registered"); + return 0; +} +static void __exit mod_m5602_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(mod_m5602_init); +module_exit(mod_m5602_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +module_param(force_sensor, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(force_sensor, + "force detection of sensor, " + "1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030"); + +module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); + +module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers " + "at startup providing a sensor is found"); diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c new file mode 100644 index 00000000000..fb700c2d055 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -0,0 +1,345 @@ +/* + * Driver for the mt9m111 sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_mt9m111.h" + +int mt9m111_probe(struct sd *sd) +{ + u8 data[2] = {0x00, 0x00}; + int i; + + if (force_sensor) { + if (force_sensor == MT9M111_SENSOR) { + info("Forcing a %s sensor", mt9m111.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a mt9m111 sensor"); + + /* Do the preinit */ + for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) { + if (preinit_mt9m111[i][0] == BRIDGE) { + m5602_write_bridge(sd, + preinit_mt9m111[i][1], + preinit_mt9m111[i][2]); + } else { + data[0] = preinit_mt9m111[i][2]; + data[1] = preinit_mt9m111[i][3]; + mt9m111_write_sensor(sd, + preinit_mt9m111[i][1], data, 2); + } + } + + if (mt9m111_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2)) + return -ENODEV; + + if ((data[0] == 0x14) && (data[1] == 0x3a)) { + info("Detected a mt9m111 sensor"); + goto sensor_found; + } + + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = mt9m111.modes; + sd->gspca_dev.cam.nmodes = mt9m111.nmodes; + sd->desc->ctrls = mt9m111.ctrls; + sd->desc->nctrls = mt9m111.nctrls; + return 0; +} + +int mt9m111_init(struct sd *sd) +{ + int i, err = 0; + + /* Init the sensor */ + for (i = 0; i < ARRAY_SIZE(init_mt9m111); i++) { + u8 data[2]; + + if (init_mt9m111[i][0] == BRIDGE) { + err = m5602_write_bridge(sd, + init_mt9m111[i][1], + init_mt9m111[i][2]); + } else { + data[0] = init_mt9m111[i][2]; + data[1] = init_mt9m111[i][3]; + err = mt9m111_write_sensor(sd, + init_mt9m111[i][1], data, 2); + } + } + + if (dump_sensor) + mt9m111_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int mt9m111_power_down(struct sd *sd) +{ + return 0; +} + +int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); + *val = data[0] & MT9M111_RMB_MIRROR_ROWS; + PDEBUG(D_V4L2, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set vertical flip to %d", val); + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); + if (err < 0) + goto out; + + data[0] = (data[0] & 0xfe) | val; + err = mt9m111_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); + *val = data[0] & MT9M111_RMB_MIRROR_COLS; + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set horizontal flip to %d", val); + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); + if (err < 0) + goto out; + + data[0] = (data[0] & 0xfd) | ((val << 1) & 0x02); + err = mt9m111_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err, tmp; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_GLOBAL_GAIN, data, 2); + tmp = ((data[1] << 8) | data[0]); + + *val = ((tmp & (1 << 10)) * 2) | + ((tmp & (1 << 9)) * 2) | + ((tmp & (1 << 8)) * 2) | + (tmp & 0x7f); + + PDEBUG(D_V4L2, "Read gain %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err, tmp; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + if (val >= INITIAL_MAX_GAIN * 2 * 2 * 2) + return -EINVAL; + + if ((val >= INITIAL_MAX_GAIN * 2 * 2) && + (val < (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2)) + tmp = (1 << 10) | (val << 9) | + (val << 8) | (val / 8); + else if ((val >= INITIAL_MAX_GAIN * 2) && + (val < INITIAL_MAX_GAIN * 2 * 2)) + tmp = (1 << 9) | (1 << 8) | (val / 4); + else if ((val >= INITIAL_MAX_GAIN) && + (val < INITIAL_MAX_GAIN * 2)) + tmp = (1 << 8) | (val / 2); + else + tmp = val; + + data[1] = (tmp & 0xff00) >> 8; + data[0] = (tmp & 0xff); + PDEBUG(D_V4L2, "tmp=%d, data[1]=%d, data[0]=%d", tmp, + data[1], data[0]); + + err = mt9m111_write_sensor(sd, MT9M111_SC_GLOBAL_GAIN, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) { + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x1a); + if (err < 0) + goto out; + + for (i = 0; i < len && !err; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(D_CONF, "Reading sensor register " + "0x%x contains 0x%x ", address, *i2c_data); + } +out: + return (err < 0) ? err : 0; +} + +int mt9m111_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger + than 16 bits has yet been seen, nor with 0 :p*/ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +void mt9m111_dump_registers(struct sd *sd) +{ + u8 address, value[2] = {0x00, 0x00}; + + info("Dumping the mt9m111 register state"); + + info("Dumping the mt9m111 sensor core registers"); + value[1] = MT9M111_SENSOR_CORE; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("Dumping the mt9m111 color pipeline registers"); + value[1] = MT9M111_COLORPIPE; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("Dumping the mt9m111 camera control registers"); + value[1] = MT9M111_CAMERA_CONTROL; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("mt9m111 register state dump complete"); +} diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h new file mode 100644 index 00000000000..315209d5aee --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -0,0 +1,1019 @@ +/* + * Driver for the mt9m111 sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * Some defines taken from the mt9m111 sensor driver + * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_MT9M111_H_ +#define M5602_MT9M111_H_ + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define MT9M111_SC_CHIPVER 0x00 +#define MT9M111_SC_ROWSTART 0x01 +#define MT9M111_SC_COLSTART 0x02 +#define MT9M111_SC_WINDOW_HEIGHT 0x03 +#define MT9M111_SC_WINDOW_WIDTH 0x04 +#define MT9M111_SC_HBLANK_CONTEXT_B 0x05 +#define MT9M111_SC_VBLANK_CONTEXT_B 0x06 +#define MT9M111_SC_HBLANK_CONTEXT_A 0x07 +#define MT9M111_SC_VBLANK_CONTEXT_A 0x08 +#define MT9M111_SC_SHUTTER_WIDTH 0x09 +#define MT9M111_SC_ROW_SPEED 0x0a + +#define MT9M111_SC_EXTRA_DELAY 0x0b +#define MT9M111_SC_SHUTTER_DELAY 0x0c +#define MT9M111_SC_RESET 0x0d +#define MT9M111_SC_R_MODE_CONTEXT_B 0x20 +#define MT9M111_SC_R_MODE_CONTEXT_A 0x21 +#define MT9M111_SC_FLASH_CONTROL 0x23 +#define MT9M111_SC_GREEN_1_GAIN 0x2b +#define MT9M111_SC_BLUE_GAIN 0x2c +#define MT9M111_SC_RED_GAIN 0x2d +#define MT9M111_SC_GREEN_2_GAIN 0x2e +#define MT9M111_SC_GLOBAL_GAIN 0x2f + +#define MT9M111_RMB_MIRROR_ROWS (1 << 0) +#define MT9M111_RMB_MIRROR_COLS (1 << 1) + +#define MT9M111_CONTEXT_CONTROL 0xc8 +#define MT9M111_PAGE_MAP 0xf0 +#define MT9M111_BYTEWISE_ADDRESS 0xf1 + +#define MT9M111_CP_OPERATING_MODE_CTL 0x06 +#define MT9M111_CP_LUMA_OFFSET 0x34 +#define MT9M111_CP_LUMA_CLIP 0x35 +#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A 0x3a +#define MT9M111_CP_LENS_CORRECTION_1 0x3b +#define MT9M111_CP_DEFECT_CORR_CONTEXT_A 0x4c +#define MT9M111_CP_DEFECT_CORR_CONTEXT_B 0x4d +#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B 0x9b +#define MT9M111_CP_GLOBAL_CLK_CONTROL 0xb3 + +#define MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18 0x65 +#define MT9M111_CC_AWB_PARAMETER_7 0x28 + +#define MT9M111_SENSOR_CORE 0x00 +#define MT9M111_COLORPIPE 0x01 +#define MT9M111_CAMERA_CONTROL 0x02 + +#define INITIAL_MAX_GAIN 64 +#define DEFAULT_GAIN 283 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; + +int mt9m111_probe(struct sd *sd); +int mt9m111_init(struct sd *sd); +int mt9m111_power_down(struct sd *sd); + +int mt9m111_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int mt9m111_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +void mt9m111_dump_registers(struct sd *sd); + +int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor mt9m111 = { + .name = "MT9M111", + + .i2c_slave_id = 0xba, + + .probe = mt9m111_probe, + .init = mt9m111_init, + .power_down = mt9m111_power_down, + + .read_sensor = mt9m111_read_sensor, + .write_sensor = mt9m111_write_sensor, + + .nctrls = 3, + .ctrls = { + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = mt9m111_set_vflip, + .get = mt9m111_get_vflip + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = mt9m111_set_hflip, + .get = mt9m111_get_hflip + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0, + .maximum = (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2, + .step = 1, + .default_value = DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = mt9m111_set_gain, + .get = mt9m111_get_gain + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_mt9m111[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xf7}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00} +}; + +static const unsigned char init_mt9m111[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xde}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xf7}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0xff, 0xff}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe3, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xe6}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + /* Set number of blank rows chosen to 400 */ + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90}, + /* Set the global gain to 283 (of 512) */ + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x03, 0x63} +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c new file mode 100644 index 00000000000..837c7e47661 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -0,0 +1,546 @@ +/* + * Driver for the ov9650 sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_ov9650.h" + +int ov9650_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + /* The ov9650 registers have a max depth of one byte */ + if (len > 1 || !len) + return -EINVAL; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + ov9650.i2c_slave_id); + m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08); + + for (i = 0; i < len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(D_CONF, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + return (err < 0) ? err : 0; +} + +int ov9650_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* The ov9650 only supports one byte writes */ + if (len > 1 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int ov9650_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0, i; + + if (force_sensor) { + if (force_sensor == OV9650_SENSOR) { + info("Forcing an %s sensor", ov9650.name); + goto sensor_found; + } + /* If we want to force another sensor, + don't try to probe this one */ + return -ENODEV; + } + + info("Probing for an ov9650 sensor"); + + /* Run the pre-init to actually probe the unit */ + for (i = 0; i < ARRAY_SIZE(preinit_ov9650); i++) { + u8 data = preinit_ov9650[i][2]; + if (preinit_ov9650[i][0] == SENSOR) + ov9650_write_sensor(sd, + preinit_ov9650[i][1], &data, 1); + else + m5602_write_bridge(sd, preinit_ov9650[i][1], data); + } + + if (ov9650_read_sensor(sd, OV9650_PID, &prod_id, 1)) + return -ENODEV; + + if (ov9650_read_sensor(sd, OV9650_VER, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0x96) && (ver_id == 0x52)) { + info("Detected an ov9650 sensor"); + goto sensor_found; + } + + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = ov9650.modes; + sd->gspca_dev.cam.nmodes = ov9650.nmodes; + sd->desc->ctrls = ov9650.ctrls; + sd->desc->nctrls = ov9650.nctrls; + return 0; +} + +int ov9650_init(struct sd *sd) +{ + int i, err = 0; + u8 data; + + if (dump_sensor) + ov9650_dump_registers(sd); + + for (i = 0; i < ARRAY_SIZE(init_ov9650) && !err; i++) { + data = init_ov9650[i][2]; + if (init_ov9650[i][0] == SENSOR) + err = ov9650_write_sensor(sd, init_ov9650[i][1], + &data, 1); + else + err = m5602_write_bridge(sd, init_ov9650[i][1], data); + } + + if (!err && dmi_check_system(ov9650_flip_dmi_table)) { + info("vflip quirk active"); + data = 0x30; + err = ov9650_write_sensor(sd, OV9650_MVFP, &data, 1); + } + + return (err < 0) ? err : 0; +} + +int ov9650_power_down(struct sd *sd) +{ + int i; + for (i = 0; i < ARRAY_SIZE(power_down_ov9650); i++) { + u8 data = power_down_ov9650[i][2]; + if (power_down_ov9650[i][0] == SENSOR) + ov9650_write_sensor(sd, + power_down_ov9650[i][1], &data, 1); + else + m5602_write_bridge(sd, power_down_ov9650[i][1], data); + } + + return 0; +} + +int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = ov9650_read_sensor(sd, OV9650_COM1, &i2c_data, 1); + if (err < 0) + goto out; + *val = i2c_data & 0x03; + + err = ov9650_read_sensor(sd, OV9650_AECH, &i2c_data, 1); + if (err < 0) + goto out; + *val |= (i2c_data << 2); + + err = ov9650_read_sensor(sd, OV9650_AECHM, &i2c_data, 1); + if (err < 0) + goto out; + *val |= (i2c_data & 0x3f) << 10; + + PDEBUG(D_V4L2, "Read exposure %d", *val); +out: + return (err < 0) ? err : 0; +} + +int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(D_V4L2, "Set exposure to %d", + val & 0xffff); + + /* The 6 MSBs */ + i2c_data = (val >> 10) & 0x3f; + err = ov9650_write_sensor(sd, OV9650_AECHM, + &i2c_data, 1); + if (err < 0) + goto out; + + /* The 8 middle bits */ + i2c_data = (val >> 2) & 0xff; + err = ov9650_write_sensor(sd, OV9650_AECH, + &i2c_data, 1); + if (err < 0) + goto out; + + /* The 2 LSBs */ + i2c_data = val & 0x03; + err = ov9650_write_sensor(sd, OV9650_COM1, &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + *val = (i2c_data & 0x03) << 8; + + err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); + *val |= i2c_data; + PDEBUG(D_V4L2, "Read gain %d", *val); + return (err < 0) ? err : 0; +} + +int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + /* The 2 MSB */ + /* Read the OV9650_VREF register first to avoid + corrupting the VREF high and low bits */ + ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + /* Mask away all uninteresting bits */ + i2c_data = ((val & 0x0300) >> 2) | + (i2c_data & 0x3F); + err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1); + + /* The 8 LSBs */ + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_RED, &i2c_data, 1); + *val = i2c_data; + + PDEBUG(D_V4L2, "Read red gain %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set red gain to %d", + val & 0xff); + + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_RED, &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_BLUE, &i2c_data, 1); + *val = i2c_data; + + PDEBUG(D_V4L2, "Read blue gain %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set blue gain to %d", + val & 0xff); + + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_BLUE, &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (dmi_check_system(ov9650_flip_dmi_table)) + *val = ((i2c_data & OV9650_HFLIP) >> 5) ? 0 : 1; + else + *val = (i2c_data & OV9650_HFLIP) >> 5; + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set horizontal flip to %d", val); + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (err < 0) + goto out; + + if (dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((i2c_data & 0xdf) | + (((val ? 0 : 1) & 0x01) << 5)); + else + i2c_data = ((i2c_data & 0xdf) | + ((val & 0x01) << 5)); + + err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (dmi_check_system(ov9650_flip_dmi_table)) + *val = ((i2c_data & 0x10) >> 4) ? 0 : 1; + else + *val = (i2c_data & 0x10) >> 4; + PDEBUG(D_V4L2, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set vertical flip to %d", val); + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (err < 0) + goto out; + + if (dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((i2c_data & 0xef) | + (((val ? 0 : 1) & 0x01) << 4)); + else + i2c_data = ((i2c_data & 0xef) | + ((val & 0x01) << 4)); + + err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + *val = (i2c_data & 0x03) << 8; + + err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); + *val |= i2c_data; + PDEBUG(D_V4L2, "Read gain %d", *val); +out: + return (err < 0) ? err : 0; +} + +int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set gain to %d", val & 0x3ff); + + /* Read the OV9650_VREF register first to avoid + corrupting the VREF high and low bits */ + err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + + /* Mask away all uninteresting bits */ + i2c_data = ((val & 0x0300) >> 2) | (i2c_data & 0x3F); + err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + + /* The 8 LSBs */ + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + *val = (i2c_data & OV9650_AWB_EN) >> 1; + PDEBUG(D_V4L2, "Read auto white balance %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set auto white balance to %d", val); + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = ((i2c_data & 0xfd) | ((val & 0x01) << 1)); + err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + *val = (i2c_data & OV9650_AGC_EN) >> 2; + PDEBUG(D_V4L2, "Read auto gain control %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set auto gain control to %d", val); + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2)); + err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +void ov9650_dump_registers(struct sd *sd) +{ + int address; + info("Dumping the ov9650 register state"); + for (address = 0; address < 0xa9; address++) { + u8 value; + ov9650_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + + info("ov9650 register state dump complete"); + + info("Probing for which registers that are read/write"); + for (address = 0; address < 0xff; address++) { + u8 old_value, ctrl_value; + u8 test_value[2] = {0xff, 0xff}; + + ov9650_read_sensor(sd, address, &old_value, 1); + ov9650_write_sensor(sd, address, test_value, 1); + ov9650_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value[0]) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + ov9650_write_sensor(sd, address, &old_value, 1); + } +} diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h new file mode 100644 index 00000000000..065632f0378 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -0,0 +1,502 @@ +/* + * Driver for the ov9650 sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_OV9650_H_ +#define M5602_OV9650_H_ + +#include <linux/dmi.h> + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define OV9650_GAIN 0x00 +#define OV9650_BLUE 0x01 +#define OV9650_RED 0x02 +#define OV9650_VREF 0x03 +#define OV9650_COM1 0x04 +#define OV9650_BAVE 0x05 +#define OV9650_GEAVE 0x06 +#define OV9650_RSVD7 0x07 +#define OV9650_PID 0x0a +#define OV9650_VER 0x0b +#define OV9650_COM3 0x0c +#define OV9650_COM5 0x0e +#define OV9650_COM6 0x0f +#define OV9650_AECH 0x10 +#define OV9650_CLKRC 0x11 +#define OV9650_COM7 0x12 +#define OV9650_COM8 0x13 +#define OV9650_COM9 0x14 +#define OV9650_COM10 0x15 +#define OV9650_RSVD16 0x16 +#define OV9650_HSTART 0x17 +#define OV9650_HSTOP 0x18 +#define OV9650_VSTRT 0x19 +#define OV9650_VSTOP 0x1a +#define OV9650_PSHFT 0x1b +#define OV9650_MVFP 0x1e +#define OV9650_AEW 0x24 +#define OV9650_AEB 0x25 +#define OV9650_VPT 0x26 +#define OV9650_BBIAS 0x27 +#define OV9650_GbBIAS 0x28 +#define OV9650_Gr_COM 0x29 +#define OV9650_RBIAS 0x2c +#define OV9650_HREF 0x32 +#define OV9650_CHLF 0x33 +#define OV9650_ARBLM 0x34 +#define OV9650_RSVD35 0x35 +#define OV9650_RSVD36 0x36 +#define OV9650_ADC 0x37 +#define OV9650_ACOM38 0x38 +#define OV9650_OFON 0x39 +#define OV9650_TSLB 0x3a +#define OV9650_COM12 0x3c +#define OV9650_COM13 0x3d +#define OV9650_COM15 0x40 +#define OV9650_COM16 0x41 +#define OV9650_LCC1 0x62 +#define OV9650_LCC2 0x63 +#define OV9650_LCC3 0x64 +#define OV9650_LCC4 0x65 +#define OV9650_LCC5 0x66 +#define OV9650_HV 0x69 +#define OV9650_DBLV 0x6b +#define OV9650_COM21 0x8b +#define OV9650_COM22 0x8c +#define OV9650_COM24 0x8e +#define OV9650_DBLC1 0x8f +#define OV9650_RSVD94 0x94 +#define OV9650_RSVD95 0x95 +#define OV9650_RSVD96 0x96 +#define OV9650_LCCFB 0x9d +#define OV9650_LCCFR 0x9e +#define OV9650_AECHM 0xa1 +#define OV9650_COM26 0xa5 +#define OV9650_ACOMA8 0xa8 +#define OV9650_ACOMA9 0xa9 + +#define OV9650_REGISTER_RESET (1 << 7) +#define OV9650_VGA_SELECT (1 << 6) +#define OV9650_RGB_SELECT (1 << 2) +#define OV9650_RAW_RGB_SELECT (1 << 0) + +#define OV9650_FAST_AGC_AEC (1 << 7) +#define OV9650_AEC_UNLIM_STEP_SIZE (1 << 6) +#define OV9650_BANDING (1 << 5) +#define OV9650_AGC_EN (1 << 2) +#define OV9650_AWB_EN (1 << 1) +#define OV9650_AEC_EN (1 << 0) + +#define OV9650_VARIOPIXEL (1 << 2) +#define OV9650_SYSTEM_CLK_SEL (1 << 7) +#define OV9650_SLAM_MODE (1 << 4) + +#define OV9650_VFLIP (1 << 4) +#define OV9650_HFLIP (1 << 5) + +#define GAIN_DEFAULT 0x14 +#define RED_GAIN_DEFAULT 0x70 +#define BLUE_GAIN_DEFAULT 0x20 +#define EXPOSURE_DEFAULT 0x5003 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; + +int ov9650_probe(struct sd *sd); +int ov9650_init(struct sd *sd); +int ov9650_power_down(struct sd *sd); + +int ov9650_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int ov9650_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +void ov9650_dump_registers(struct sd *sd); + +int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor ov9650 = { + .name = "OV9650", + .i2c_slave_id = 0x60, + .probe = ov9650_probe, + .init = ov9650_init, + .power_down = ov9650_power_down, + .read_sensor = ov9650_read_sensor, + .write_sensor = ov9650_write_sensor, + + .nctrls = 8, + .ctrls = { + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0xffff, + .step = 0x1, + .default_value = EXPOSURE_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_exposure, + .get = ov9650_get_exposure + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0x3ff, + .step = 0x1, + .default_value = GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_gain, + .get = ov9650_get_gain + }, { + { + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = RED_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_red_balance, + .get = ov9650_get_red_balance + }, { + { + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = BLUE_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_blue_balance, + .get = ov9650_get_blue_balance + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_hflip, + .get = ov9650_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_vflip, + .get = ov9650_get_vflip + }, { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto white balance", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_auto_white_balance, + .get = ov9650_get_auto_white_balance + }, { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto gain control", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_auto_gain, + .get = ov9650_get_auto_gain + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_ov9650[][3] = +{ + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40} +}; + +static const unsigned char init_ov9650[][3] = +{ + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40}, + + /* Set QQVGA */ + {SENSOR, OV9650_COM1, 0x20}, + /* Set fast AGC/AEC algorithm with unlimited step size */ + {SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC | + OV9650_AEC_UNLIM_STEP_SIZE | + OV9650_AWB_EN | OV9650_AGC_EN}, + + {SENSOR, OV9650_CHLF, 0x10}, + {SENSOR, OV9650_ARBLM, 0xbf}, + {SENSOR, OV9650_ACOM38, 0x81}, + /* Turn off color matrix coefficient double option */ + {SENSOR, OV9650_COM16, 0x00}, + /* Enable color matrix for RGB/YUV, Delay Y channel, + set output Y/UV delay to 1 */ + {SENSOR, OV9650_COM13, 0x19}, + /* Enable digital BLC, Set output mode to U Y V Y */ + {SENSOR, OV9650_TSLB, 0x0c}, + /* Limit the AGC/AEC stable upper region */ + {SENSOR, OV9650_COM24, 0x00}, + /* Enable HREF and some out of spec things */ + {SENSOR, OV9650_COM12, 0x73}, + /* Set all DBLC offset signs to positive and + do some out of spec stuff */ + {SENSOR, OV9650_DBLC1, 0xdf}, + {SENSOR, OV9650_COM21, 0x06}, + {SENSOR, OV9650_RSVD35, 0x91}, + /* Necessary, no camera stream without it */ + {SENSOR, OV9650_RSVD16, 0x06}, + {SENSOR, OV9650_RSVD94, 0x99}, + {SENSOR, OV9650_RSVD95, 0x99}, + {SENSOR, OV9650_RSVD96, 0x04}, + /* Enable full range output */ + {SENSOR, OV9650_COM15, 0x0}, + /* Enable HREF at optical black, enable ADBLC bias, + enable ADBLC, reset timings at format change */ + {SENSOR, OV9650_COM6, 0x4b}, + /* Subtract 32 from the B channel bias */ + {SENSOR, OV9650_BBIAS, 0xa0}, + /* Subtract 32 from the Gb channel bias */ + {SENSOR, OV9650_GbBIAS, 0xa0}, + /* Do not bypass the analog BLC and to some out of spec stuff */ + {SENSOR, OV9650_Gr_COM, 0x00}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0xa0}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0x0}, + {SENSOR, OV9650_COM26, 0x80}, + {SENSOR, OV9650_ACOMA9, 0x98}, + /* Set the AGC/AEC stable region upper limit */ + {SENSOR, OV9650_AEW, 0x68}, + /* Set the AGC/AEC stable region lower limit */ + {SENSOR, OV9650_AEB, 0x5c}, + /* Set the high and low limit nibbles to 3 */ + {SENSOR, OV9650_VPT, 0xc3}, + /* Set the Automatic Gain Ceiling (AGC) to 128x, + drop VSYNC at frame drop, + limit exposure timing, + drop frame when the AEC step is larger than the exposure gap */ + {SENSOR, OV9650_COM9, 0x6e}, + /* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync) + and set PWDN to SLVS (slave mode vertical sync) */ + {SENSOR, OV9650_COM10, 0x42}, + /* Set horizontal column start high to default value */ + {SENSOR, OV9650_HSTART, 0x1a}, + /* Set horizontal column end */ + {SENSOR, OV9650_HSTOP, 0xbf}, + /* Complementing register to the two writes above */ + {SENSOR, OV9650_HREF, 0xb2}, + /* Set vertical row start high bits */ + {SENSOR, OV9650_VSTRT, 0x02}, + /* Set vertical row end low bits */ + {SENSOR, OV9650_VSTOP, 0x7e}, + /* Set complementing vertical frame control */ + {SENSOR, OV9650_VREF, 0x10}, + /* Set raw RGB output format with VGA resolution */ + {SENSOR, OV9650_COM7, OV9650_VGA_SELECT | + OV9650_RGB_SELECT | + OV9650_RAW_RGB_SELECT}, + {SENSOR, OV9650_ADC, 0x04}, + {SENSOR, OV9650_HV, 0x40}, + /* Enable denoise, and white-pixel erase */ + {SENSOR, OV9650_COM22, 0x23}, + + /* Set the high bits of the exposure value */ + {SENSOR, OV9650_AECH, ((EXPOSURE_DEFAULT & 0xff00) >> 8)}, + + /* Set the low bits of the exposure value */ + {SENSOR, OV9650_COM1, (EXPOSURE_DEFAULT & 0xff)}, + {SENSOR, OV9650_GAIN, GAIN_DEFAULT}, + {SENSOR, OV9650_BLUE, BLUE_GAIN_DEFAULT}, + {SENSOR, OV9650_RED, RED_GAIN_DEFAULT}, + + {SENSOR, OV9650_COM3, OV9650_VARIOPIXEL}, + {SENSOR, OV9650_COM5, OV9650_SYSTEM_CLK_SEL}, + + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x09}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x5e}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0xde} +}; + +static const unsigned char power_down_ov9650[][3] = +{ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {SENSOR, OV9650_COM7, 0x80}, + {SENSOR, OV9650_OFON, 0xf4}, + {SENSOR, OV9650_MVFP, 0x80}, + {SENSOR, OV9650_DBLV, 0x3f}, + {SENSOR, OV9650_RSVD36, 0x49}, + {SENSOR, OV9650_COM7, 0x05}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0} +}; + +/* Vertically and horizontally flips the image if matched, needed for machines + where the sensor is mounted upside down */ +static + const + struct dmi_system_id ov9650_flip_dmi_table[] = { + { + .ident = "ASUS A6VC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6VC") + } + }, + { + .ident = "ASUS A6VM", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6VM") + } + }, + { + .ident = "ASUS A6JC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6JC") + } + }, + { + .ident = "ASUS A6Kt", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt") + } + }, + { } +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c new file mode 100644 index 00000000000..d17ac52566e --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_po1030.c @@ -0,0 +1,400 @@ +/* + * Driver for the po1030 sensor + * + * Copyright (c) 2008 Erik Andrén + * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_po1030.h" + +int po1030_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0, i; + + if (force_sensor) { + if (force_sensor == PO1030_SENSOR) { + info("Forcing a %s sensor", po1030.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a po1030 sensor"); + + /* Run the pre-init to actually probe the unit */ + for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) { + u8 data = preinit_po1030[i][2]; + if (preinit_po1030[i][0] == SENSOR) + po1030_write_sensor(sd, + preinit_po1030[i][1], &data, 1); + else + m5602_write_bridge(sd, preinit_po1030[i][1], data); + } + + if (po1030_read_sensor(sd, 0x3, &prod_id, 1)) + return -ENODEV; + + if (po1030_read_sensor(sd, 0x4, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0x02) && (ver_id == 0xef)) { + info("Detected a po1030 sensor"); + goto sensor_found; + } + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = po1030.modes; + sd->gspca_dev.cam.nmodes = po1030.nmodes; + sd->desc->ctrls = po1030.ctrls; + sd->desc->nctrls = po1030.nctrls; + return 0; +} + +int po1030_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08); + + for (i = 0; i < len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(D_CONF, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + return (err < 0) ? err : 0; +} + +int po1030_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* The po1030 only supports one byte writes */ + if (len > 1 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the footer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int po1030_init(struct sd *sd) +{ + int i, err = 0; + + /* Init the sensor */ + for (i = 0; i < ARRAY_SIZE(init_po1030); i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_po1030[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_po1030[i][1], + init_po1030[i][2]); + break; + + case SENSOR: + data[0] = init_po1030[i][2]; + err = po1030_write_sensor(sd, + init_po1030[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_po1030[i][2]; + data[1] = init_po1030[i][3]; + err = po1030_write_sensor(sd, + init_po1030[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + po1030_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_H, + &i2c_data, 1); + if (err < 0) + goto out; + *val = (i2c_data << 8); + + err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_M, + &i2c_data, 1); + *val |= i2c_data; + + PDEBUG(D_V4L2, "Exposure read as %d", *val); +out: + return (err < 0) ? err : 0; +} + +int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(D_V4L2, "Set exposure to %d", val & 0xffff); + + i2c_data = ((val & 0xff00) >> 8); + PDEBUG(D_V4L2, "Set exposure to high byte to 0x%x", + i2c_data); + + err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_H, + &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = (val & 0xff); + PDEBUG(D_V4L2, "Set exposure to low byte to 0x%x", + i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_M, + &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(D_V4L2, "Read global gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_CONTROL2, + &i2c_data, 1); + + *val = (i2c_data >> 7) & 0x01 ; + + PDEBUG(D_V4L2, "Read hflip %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(D_V4L2, "Set hflip %d", val); + + i2c_data = (val & 0x01) << 7; + + err = po1030_write_sensor(sd, PO1030_REG_CONTROL2, + &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + + *val = (i2c_data >> 6) & 0x01; + + PDEBUG(D_V4L2, "Read vflip %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(D_V4L2, "Set vflip %d", val); + + i2c_data = (val & 0x01) << 6; + + err = po1030_write_sensor(sd, PO1030_REG_CONTROL2, + &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + i2c_data = val & 0xff; + PDEBUG(D_V4L2, "Set global gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_RED_GAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(D_V4L2, "Read red gain %d", *val); + return (err < 0) ? err : 0; +} + +int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + i2c_data = val & 0xff; + PDEBUG(D_V4L2, "Set red gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_RED_GAIN, + &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_BLUE_GAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(D_V4L2, "Read blue gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + i2c_data = val & 0xff; + PDEBUG(D_V4L2, "Set blue gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_BLUE_GAIN, + &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int po1030_power_down(struct sd *sd) +{ + return 0; +} + +void po1030_dump_registers(struct sd *sd) +{ + int address; + u8 value = 0; + + info("Dumping the po1030 sensor core registers"); + for (address = 0; address < 0x7f; address++) { + po1030_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + + info("po1030 register state dump complete"); + + info("Probing for which registers that are read/write"); + for (address = 0; address < 0xff; address++) { + u8 old_value, ctrl_value; + u8 test_value[2] = {0xff, 0xff}; + + po1030_read_sensor(sd, address, &old_value, 1); + po1030_write_sensor(sd, address, test_value, 1); + po1030_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value[0]) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + po1030_write_sensor(sd, address, &old_value, 1); + } +} diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h new file mode 100644 index 00000000000..a0b75ff61d7 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -0,0 +1,508 @@ +/* + * Driver for the po1030 sensor. + * + * Copyright (c) 2008 Erik Andrén + * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * Register defines taken from Pascal Stangs Proxycon Armlib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_PO1030_H_ +#define M5602_PO1030_H_ + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define PO1030_REG_DEVID_H 0x00 +#define PO1030_REG_DEVID_L 0x01 +#define PO1030_REG_FRAMEWIDTH_H 0x04 +#define PO1030_REG_FRAMEWIDTH_L 0x05 +#define PO1030_REG_FRAMEHEIGHT_H 0x06 +#define PO1030_REG_FRAMEHEIGHT_L 0x07 +#define PO1030_REG_WINDOWX_H 0x08 +#define PO1030_REG_WINDOWX_L 0x09 +#define PO1030_REG_WINDOWY_H 0x0a +#define PO1030_REG_WINDOWY_L 0x0b +#define PO1030_REG_WINDOWWIDTH_H 0x0c +#define PO1030_REG_WINDOWWIDTH_L 0x0d +#define PO1030_REG_WINDOWHEIGHT_H 0x0e +#define PO1030_REG_WINDOWHEIGHT_L 0x0f + +#define PO1030_REG_GLOBALIBIAS 0x12 +#define PO1030_REG_PIXELIBIAS 0x13 + +#define PO1030_REG_GLOBALGAIN 0x15 +#define PO1030_REG_RED_GAIN 0x16 +#define PO1030_REG_GREEN_1_GAIN 0x17 +#define PO1030_REG_BLUE_GAIN 0x18 +#define PO1030_REG_GREEN_2_GAIN 0x19 + +#define PO1030_REG_INTEGLINES_H 0x1a +#define PO1030_REG_INTEGLINES_M 0x1b +#define PO1030_REG_INTEGLINES_L 0x1c + +#define PO1030_REG_CONTROL1 0x1d +#define PO1030_REG_CONTROL2 0x1e +#define PO1030_REG_CONTROL3 0x1f +#define PO1030_REG_CONTROL4 0x20 + +#define PO1030_REG_PERIOD50_H 0x23 +#define PO1030_REG_PERIOD50_L 0x24 +#define PO1030_REG_PERIOD60_H 0x25 +#define PO1030_REG_PERIOD60_L 0x26 +#define PO1030_REG_REGCLK167 0x27 +#define PO1030_REG_DELTA50 0x28 +#define PO1030_REG_DELTA60 0x29 + +#define PO1030_REG_ADCOFFSET 0x2c + +/* Gamma Correction Coeffs */ +#define PO1030_REG_GC0 0x2d +#define PO1030_REG_GC1 0x2e +#define PO1030_REG_GC2 0x2f +#define PO1030_REG_GC3 0x30 +#define PO1030_REG_GC4 0x31 +#define PO1030_REG_GC5 0x32 +#define PO1030_REG_GC6 0x33 +#define PO1030_REG_GC7 0x34 + +/* Color Transform Matrix */ +#define PO1030_REG_CT0 0x35 +#define PO1030_REG_CT1 0x36 +#define PO1030_REG_CT2 0x37 +#define PO1030_REG_CT3 0x38 +#define PO1030_REG_CT4 0x39 +#define PO1030_REG_CT5 0x3a +#define PO1030_REG_CT6 0x3b +#define PO1030_REG_CT7 0x3c +#define PO1030_REG_CT8 0x3d + +#define PO1030_REG_AUTOCTRL1 0x3e +#define PO1030_REG_AUTOCTRL2 0x3f + +#define PO1030_REG_YTARGET 0x40 +#define PO1030_REG_GLOBALGAINMIN 0x41 +#define PO1030_REG_GLOBALGAINMAX 0x42 + +/* Output format control */ +#define PO1030_REG_OUTFORMCTRL1 0x5a +#define PO1030_REG_OUTFORMCTRL2 0x5b +#define PO1030_REG_OUTFORMCTRL3 0x5c +#define PO1030_REG_OUTFORMCTRL4 0x5d +#define PO1030_REG_OUTFORMCTRL5 0x5e + +/* Imaging coefficients */ +#define PO1030_REG_YBRIGHT 0x73 +#define PO1030_REG_YCONTRAST 0x74 +#define PO1030_REG_YSATURATION 0x75 + +#define PO1030_HFLIP (1 << 7) +#define PO1030_VFLIP (1 << 6) + +/*****************************************************************************/ + +#define PO1030_GLOBAL_GAIN_DEFAULT 0x12 +#define PO1030_EXPOSURE_DEFAULT 0x0085 +#define PO1030_BLUE_GAIN_DEFAULT 0x40 +#define PO1030_RED_GAIN_DEFAULT 0x40 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; + +int po1030_probe(struct sd *sd); +int po1030_init(struct sd *sd); +int po1030_power_down(struct sd *sd); + +void po1030_dump_registers(struct sd *sd); + +int po1030_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int po1030_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor po1030 = { + .name = "PO1030", + + .i2c_slave_id = 0xdc, + + .probe = po1030_probe, + .init = po1030_init, + .power_down = po1030_power_down, + + .nctrls = 6, + .ctrls = { + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0x4f, + .step = 0x1, + .default_value = PO1030_GLOBAL_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_gain, + .get = po1030_get_gain + }, { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x02ff, + .step = 0x1, + .default_value = PO1030_EXPOSURE_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_exposure, + .get = po1030_get_exposure + }, { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_RED_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_red_balance, + .get = po1030_get_red_balance + }, { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_BLUE_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_blue_balance, + .get = po1030_get_blue_balance + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + .set = po1030_set_hflip, + .get = po1030_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + .set = po1030_set_vflip, + .get = po1030_get_vflip + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_po1030[][3] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00} +}; + +static const unsigned char init_po1030[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + /*sequence 1*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d}, + + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + /*end of sequence 1*/ + + /*sequence 2 (same as stop sequence)*/ + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + /*end of sequence 2*/ + + /*sequence 5*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + /*end of sequence 5*/ + + /*sequence 2 stop */ + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + /*end of sequence 2 stop */ + +/* --------------------------------- + * end of init - begin of start + * --------------------------------- */ + + /*sequence 3*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + /*end of sequence 3*/ + /*sequence 4*/ + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x04}, + + /* Set the width to 751 */ + {SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef}, + + /* Set the height to 540 */ + {SENSOR, PO1030_REG_FRAMEHEIGHT_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEHEIGHT_L, 0x1c}, + + /* Set the x window to 1 */ + {SENSOR, PO1030_REG_WINDOWX_H, 0x00}, + {SENSOR, PO1030_REG_WINDOWX_L, 0x01}, + + /* Set the y window to 1 */ + {SENSOR, PO1030_REG_WINDOWY_H, 0x00}, + {SENSOR, PO1030_REG_WINDOWY_L, 0x01}, + + {SENSOR, PO1030_REG_WINDOWWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_WINDOWWIDTH_L, 0x87}, + {SENSOR, PO1030_REG_WINDOWHEIGHT_H, 0x01}, + {SENSOR, PO1030_REG_WINDOWHEIGHT_L, 0xe3}, + + {SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04}, + {SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04}, + {SENSOR, PO1030_REG_AUTOCTRL1, 0x08}, + {SENSOR, PO1030_REG_CONTROL2, 0x03}, + {SENSOR, 0x21, 0x90}, + {SENSOR, PO1030_REG_YTARGET, 0x60}, + {SENSOR, 0x59, 0x13}, + {SENSOR, PO1030_REG_OUTFORMCTRL1, 0x40}, + {SENSOR, 0x5f, 0x00}, + {SENSOR, 0x60, 0x80}, + {SENSOR, 0x78, 0x14}, + {SENSOR, 0x6f, 0x01}, + {SENSOR, PO1030_REG_CONTROL1, 0x18}, + {SENSOR, PO1030_REG_GLOBALGAINMAX, 0x14}, + {SENSOR, 0x63, 0x38}, + {SENSOR, 0x64, 0x38}, + {SENSOR, PO1030_REG_CONTROL1, 0x58}, + {SENSOR, PO1030_REG_RED_GAIN, 0x30}, + {SENSOR, PO1030_REG_GREEN_1_GAIN, 0x30}, + {SENSOR, PO1030_REG_BLUE_GAIN, 0x30}, + {SENSOR, PO1030_REG_GREEN_2_GAIN, 0x30}, + {SENSOR, PO1030_REG_GC0, 0x10}, + {SENSOR, PO1030_REG_GC1, 0x20}, + {SENSOR, PO1030_REG_GC2, 0x40}, + {SENSOR, PO1030_REG_GC3, 0x60}, + {SENSOR, PO1030_REG_GC4, 0x80}, + {SENSOR, PO1030_REG_GC5, 0xa0}, + {SENSOR, PO1030_REG_GC6, 0xc0}, + {SENSOR, PO1030_REG_GC7, 0xff}, + /*end of sequence 4*/ + /*sequence 5*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7e}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + /*end of sequence 5*/ + + /*sequence 6*/ + /* Changing 40 in f0 the image becomes green in bayer mode and red in + * rgb mode */ + {SENSOR, PO1030_REG_RED_GAIN, PO1030_RED_GAIN_DEFAULT}, + /* in changing 40 in f0 the image becomes green in bayer mode and red in + * rgb mode */ + {SENSOR, PO1030_REG_BLUE_GAIN, PO1030_BLUE_GAIN_DEFAULT}, + + /* with a very low lighted environment increase the exposure but + * decrease the FPS (Frame Per Second) */ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + + /* Controls high exposure more than SENSOR_LOW_EXPOSURE, use only in + * low lighted environment (f0 is more than ff ?)*/ + {SENSOR, PO1030_REG_INTEGLINES_H, ((PO1030_EXPOSURE_DEFAULT >> 2) + & 0xff)}, + + /* Controls middle exposure, use only in high lighted environment */ + {SENSOR, PO1030_REG_INTEGLINES_M, PO1030_EXPOSURE_DEFAULT & 0xff}, + + /* Controls clarity (not sure) */ + {SENSOR, PO1030_REG_INTEGLINES_L, 0x00}, + /* Controls gain (the image is more lighted) */ + {SENSOR, PO1030_REG_GLOBALGAIN, PO1030_GLOBAL_GAIN_DEFAULT}, + + /* Sets the width */ + {SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef} + /*end of sequence 6*/ +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c new file mode 100644 index 00000000000..14b1eac5b81 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -0,0 +1,463 @@ +/* + * Driver for the s5k4aa sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_s5k4aa.h" + +int s5k4aa_probe(struct sd *sd) +{ + u8 prod_id[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + const u8 expected_prod_id[6] = {0x00, 0x10, 0x00, 0x4b, 0x33, 0x75}; + int i, err = 0; + + if (force_sensor) { + if (force_sensor == S5K4AA_SENSOR) { + info("Forcing a %s sensor", s5k4aa.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a s5k4aa sensor"); + + /* Preinit the sensor */ + for (i = 0; i < ARRAY_SIZE(preinit_s5k4aa) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (preinit_s5k4aa[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + preinit_s5k4aa[i][1], + preinit_s5k4aa[i][2]); + break; + + case SENSOR: + data[0] = preinit_s5k4aa[i][2]; + err = s5k4aa_write_sensor(sd, + preinit_s5k4aa[i][1], + data, 1); + break; + + case SENSOR_LONG: + data[0] = preinit_s5k4aa[i][2]; + data[1] = preinit_s5k4aa[i][3]; + err = s5k4aa_write_sensor(sd, + preinit_s5k4aa[i][1], + data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + /* Test some registers, but we don't know their exact meaning yet */ + if (s5k4aa_read_sensor(sd, 0x00, prod_id, sizeof(prod_id))) + return -ENODEV; + + if (memcmp(prod_id, expected_prod_id, sizeof(prod_id))) + return -ENODEV; + else + info("Detected a s5k4aa sensor"); +sensor_found: + sd->gspca_dev.cam.cam_mode = s5k4aa.modes; + sd->gspca_dev.cam.nmodes = s5k4aa.nmodes; + sd->desc->ctrls = s5k4aa.ctrls; + sd->desc->nctrls = s5k4aa.nctrls; + + return 0; +} + +int s5k4aa_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len); + if (err < 0) + goto out; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + for (i = 0; (i < len) & !err; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(D_CONF, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger than 16 bits has yet been seen */ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int s5k4aa_init(struct sd *sd) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(init_s5k4aa) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_s5k4aa[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_s5k4aa[i][1], + init_s5k4aa[i][2]); + break; + + case SENSOR: + data[0] = init_s5k4aa[i][2]; + err = s5k4aa_write_sensor(sd, + init_s5k4aa[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_s5k4aa[i][2]; + data[1] = init_s5k4aa[i][3]; + err = s5k4aa_write_sensor(sd, + init_s5k4aa[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + s5k4aa_dump_registers(sd); + + if (!err && dmi_check_system(s5k4aa_vflip_dmi_table)) { + u8 data = 0x02; + info("vertical flip quirk active"); + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + s5k4aa_read_sensor(sd, S5K4AA_READ_MODE, &data, 1); + data |= S5K4AA_RM_V_FLIP; + data &= ~S5K4AA_RM_H_FLIP; + s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + + /* Decrement COLSTART to preserve color order (BGGR) */ + s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + data--; + s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + + /* Increment ROWSTART to preserve color order (BGGR) */ + s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + data++; + s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } + + return (err < 0) ? err : 0; +} + +int s5k4aa_power_down(struct sd *sd) +{ + return 0; +} + +int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1); + if (err < 0) + goto out; + + *val = data << 8; + err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); + *val |= data; + PDEBUG(D_V4L2, "Read exposure %d", *val); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(D_V4L2, "Set exposure to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + data = (val >> 8) & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1); + if (err < 0) + goto out; + data = val & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + *val = (data & S5K4AA_RM_V_FLIP) >> 7; + PDEBUG(D_V4L2, "Read vertical flip %d", *val); + +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(D_V4L2, "Set vertical flip to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + data = ((data & ~S5K4AA_RM_V_FLIP) + | ((val & 0x01) << 7)); + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + if (val) { + err = s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + if (err < 0) + goto out; + + data++; + err = s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } else { + err = s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + if (err < 0) + goto out; + + data--; + err = s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + *val = (data & S5K4AA_RM_H_FLIP) >> 6; + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(D_V4L2, "Set horizontal flip to %d", + val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + data = ((data & ~S5K4AA_RM_H_FLIP) | ((val & 0x01) << 6)); + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + if (val) { + err = s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + data++; + err = s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + } else { + err = s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + data--; + err = s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_GAIN_2, &data, 1); + *val = data; + PDEBUG(D_V4L2, "Read gain %d", *val); + +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(D_V4L2, "Set gain to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + data = val & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_GAIN_2, &data, 1); + +out: + return (err < 0) ? err : 0; +} + +void s5k4aa_dump_registers(struct sd *sd) +{ + int address; + u8 page, old_page; + s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1); + for (page = 0; page < 16; page++) { + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1); + info("Dumping the s5k4aa register state for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 value = 0; + s5k4aa_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + } + info("s5k4aa register state dump complete"); + + for (page = 0; page < 16; page++) { + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1); + info("Probing for which registers that are " + "read/write for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 old_value, ctrl_value, test_value = 0xff; + + s5k4aa_read_sensor(sd, address, &old_value, 1); + s5k4aa_write_sensor(sd, address, &test_value, 1); + s5k4aa_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + s5k4aa_write_sensor(sd, address, &old_value, 1); + } + } + info("Read/write register probing complete"); + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1); +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h new file mode 100644 index 00000000000..eaef67655af --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -0,0 +1,369 @@ +/* + * Driver for the s5k4aa sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K4AA_H_ +#define M5602_S5K4AA_H_ + +#include <linux/dmi.h> + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define S5K4AA_PAGE_MAP 0xec + +#define S5K4AA_PAGE_MAP_0 0x00 +#define S5K4AA_PAGE_MAP_1 0x01 +#define S5K4AA_PAGE_MAP_2 0x02 + +/* Sensor register definitions for page 0x02 */ +#define S5K4AA_READ_MODE 0x03 +#define S5K4AA_ROWSTART_HI 0x04 +#define S5K4AA_ROWSTART_LO 0x05 +#define S5K4AA_COLSTART_HI 0x06 +#define S5K4AA_COLSTART_LO 0x07 +#define S5K4AA_WINDOW_HEIGHT_HI 0x08 +#define S5K4AA_WINDOW_HEIGHT_LO 0x09 +#define S5K4AA_WINDOW_WIDTH_HI 0x0a +#define S5K4AA_WINDOW_WIDTH_LO 0x0b +#define S5K4AA_GLOBAL_GAIN__ 0x0f /* Only a guess ATM !!! */ +#define S5K4AA_H_BLANK_HI__ 0x1d /* Only a guess ATM !!! sync lost + if too low, reduces frame rate + if too high */ +#define S5K4AA_H_BLANK_LO__ 0x1e /* Only a guess ATM !!! */ +#define S5K4AA_EXPOSURE_HI 0x17 +#define S5K4AA_EXPOSURE_LO 0x18 +#define S5K4AA_GAIN_1 0x1f /* (digital?) gain : 5 bits */ +#define S5K4AA_GAIN_2 0x20 /* (analogue?) gain : 7 bits */ + +#define S5K4AA_RM_ROW_SKIP_4X 0x08 +#define S5K4AA_RM_ROW_SKIP_2X 0x04 +#define S5K4AA_RM_COL_SKIP_4X 0x02 +#define S5K4AA_RM_COL_SKIP_2X 0x01 +#define S5K4AA_RM_H_FLIP 0x40 +#define S5K4AA_RM_V_FLIP 0x80 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; + +int s5k4aa_probe(struct sd *sd); +int s5k4aa_init(struct sd *sd); +int s5k4aa_power_down(struct sd *sd); + +void s5k4aa_dump_registers(struct sd *sd); + +int s5k4aa_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int s5k4aa_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor s5k4aa = { + .name = "S5K4AA", + .probe = s5k4aa_probe, + .init = s5k4aa_init, + .power_down = s5k4aa_power_down, + .read_sensor = s5k4aa_read_sensor, + .write_sensor = s5k4aa_write_sensor, + .i2c_slave_id = 0x5a, + .nctrls = 4, + .ctrls = { + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k4aa_set_vflip, + .get = s5k4aa_get_vflip + + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k4aa_set_hflip, + .get = s5k4aa_get_hflip + + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 0xa0, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k4aa_set_gain, + .get = s5k4aa_get_gain + }, { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 13, + .maximum = 0xfff, + .step = 1, + .default_value = 0x100, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k4aa_set_exposure, + .get = s5k4aa_get_exposure + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_s5k4aa[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x14, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K4AA_PAGE_MAP, 0x00, 0x00} +}; + +static const unsigned char init_s5k4aa[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x14, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K4AA_PAGE_MAP, 0x07, 0x00}, + {SENSOR, 0x36, 0x01, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, 0x0c, 0x05, 0x00}, + {SENSOR, 0x02, 0x0e, 0x00}, + {SENSOR, S5K4AA_GAIN_1, 0x0f, 0x00}, + {SENSOR, S5K4AA_GAIN_2, 0x00, 0x00}, + {SENSOR, S5K4AA_GLOBAL_GAIN__, 0x01, 0x00}, + {SENSOR, 0x11, 0x00, 0x00}, + {SENSOR, 0x12, 0x00, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, S5K4AA_READ_MODE, 0xa0, 0x00}, + {SENSOR, 0x37, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00}, + {SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_COLSTART_LO, 0x0b, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc4, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x08, 0x00}, + {SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_LO__, 0x48, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_LO, 0x43, 0x00}, + {SENSOR, 0x11, 0x04, 0x00}, + {SENSOR, 0x12, 0xc3, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + /* VSYNC_PARA, VSYNC_PARA : img height 480 = 0x01e0 */ + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + /* HSYNC_PARA, HSYNC_PARA : img width 640 = 0x0280 */ + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x80, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, /* 48 MHz */ + + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, S5K4AA_READ_MODE, S5K4AA_RM_H_FLIP | S5K4AA_RM_ROW_SKIP_2X + | S5K4AA_RM_COL_SKIP_2X, 0x00}, + /* 0x37 : Fix image stability when light is too bright and improves + * image quality in 640x480, but worsens it in 1280x1024 */ + {SENSOR, 0x37, 0x01, 0x00}, + /* ROWSTART_HI, ROWSTART_LO : 10 + (1024-960)/2 = 42 = 0x002a */ + {SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00}, + {SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_COLSTART_LO, 0x0c, 0x00}, + /* window_height_hi, window_height_lo : 960 = 0x03c0 */ + {SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc0, 0x00}, + /* window_width_hi, window_width_lo : 1280 = 0x0500 */ + {SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_LO__, 0xa8, 0x00}, /* helps to sync... */ + {SENSOR, S5K4AA_EXPOSURE_HI, 0x01, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_LO, 0x00, 0x00}, + {SENSOR, 0x11, 0x04, 0x00}, + {SENSOR, 0x12, 0xc3, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, 0x02, 0x0e, 0x00}, + {SENSOR_LONG, S5K4AA_GLOBAL_GAIN__, 0x0f, 0x00}, + {SENSOR, S5K4AA_GAIN_1, 0x0b, 0x00}, + {SENSOR, S5K4AA_GAIN_2, 0xa0, 0x00} +}; + +static + const + struct dmi_system_id s5k4aa_vflip_dmi_table[] = { + { + .ident = "Fujitsu-Siemens Amilo Xa 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") + } + }, + { + .ident = "Fujitsu-Siemens Amilo Xi 2550", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2550") + } + }, + { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "07/26/2007") + } + }, + { } +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c new file mode 100644 index 00000000000..8988a728e0b --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -0,0 +1,423 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_s5k83a.h" + +int s5k83a_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0; + int i, err = 0; + + if (force_sensor) { + if (force_sensor == S5K83A_SENSOR) { + info("Forcing a %s sensor", s5k83a.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a s5k83a sensor"); + + /* Preinit the sensor */ + for (i = 0; i < ARRAY_SIZE(preinit_s5k83a) && !err; i++) { + u8 data[2] = {preinit_s5k83a[i][2], preinit_s5k83a[i][3]}; + if (preinit_s5k83a[i][0] == SENSOR) + err = s5k83a_write_sensor(sd, preinit_s5k83a[i][1], + data, 2); + else + err = m5602_write_bridge(sd, preinit_s5k83a[i][1], + data[0]); + } + + /* We don't know what register (if any) that contain the product id + * Just pick the first addresses that seem to produce the same results + * on multiple machines */ + if (s5k83a_read_sensor(sd, 0x00, &prod_id, 1)) + return -ENODEV; + + if (s5k83a_read_sensor(sd, 0x01, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0xff) || (ver_id == 0xff)) + return -ENODEV; + else + info("Detected a s5k83a sensor"); + +sensor_found: + sd->gspca_dev.cam.cam_mode = s5k83a.modes; + sd->gspca_dev.cam.nmodes = s5k83a.nmodes; + sd->desc->ctrls = s5k83a.ctrls; + sd->desc->nctrls = s5k83a.nctrls; + return 0; +} + +int s5k83a_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len); + if (err < 0) + goto out; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + if (err < 0) + goto out; + for (i = 0; i < len && !len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(D_CONF, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + +out: + return (err < 0) ? err : 0; +} + +int s5k83a_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger than 16 bits has yet been seen */ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int s5k83a_init(struct sd *sd) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(init_s5k83a) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_s5k83a[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_s5k83a[i][1], + init_s5k83a[i][2]); + break; + + case SENSOR: + data[0] = init_s5k83a[i][2]; + err = s5k83a_write_sensor(sd, + init_s5k83a[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_s5k83a[i][2]; + data[1] = init_s5k83a[i][3]; + err = s5k83a_write_sensor(sd, + init_s5k83a[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + s5k83a_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int s5k83a_power_down(struct sd *sd) +{ + return 0; +} + +void s5k83a_dump_registers(struct sd *sd) +{ + int address; + u8 page, old_page; + s5k83a_read_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1); + + for (page = 0; page < 16; page++) { + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1); + info("Dumping the s5k83a register state for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 val = 0; + s5k83a_read_sensor(sd, address, &val, 1); + info("register 0x%x contains 0x%x", + address, val); + } + } + info("s5k83a register state dump complete"); + + for (page = 0; page < 16; page++) { + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1); + info("Probing for which registers that are read/write " + "for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 old_val, ctrl_val, test_val = 0xff; + + s5k83a_read_sensor(sd, address, &old_val, 1); + s5k83a_write_sensor(sd, address, &test_val, 1); + s5k83a_read_sensor(sd, address, &ctrl_val, 1); + + if (ctrl_val == test_val) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original val */ + s5k83a_write_sensor(sd, address, &old_val, 1); + } + } + info("Read/write register probing complete"); + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1); +} + +int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_BRIGHTNESS, data, 2); + data[1] = data[1] << 1; + *val = data[1]; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x00; + data[1] = 0x20; + err = s5k83a_write_sensor(sd, 0x14, data, 2); + if (err < 0) + return err; + + data[0] = 0x01; + data[1] = 0x00; + err = s5k83a_write_sensor(sd, 0x0d, data, 2); + if (err < 0) + return err; + + /* FIXME: This is not sane, we need to figure out the composition + of these registers */ + data[0] = val >> 3; /* brightness, high 5 bits */ + data[1] = val >> 1; /* brightness, high 7 bits */ + err = s5k83a_write_sensor(sd, S5K83A_BRIGHTNESS, data, 2); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_WHITENESS, &data, 1); + + *val = data; + return (err < 0) ? err : 0; +} + +int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = val; + err = s5k83a_write_sensor(sd, S5K83A_WHITENESS, data, 1); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_GAIN, data, 2); + + data[1] = data[1] & 0x3f; + if (data[1] > S5K83A_MAXIMUM_GAIN) + data[1] = S5K83A_MAXIMUM_GAIN; + + *val = data[1]; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0; + data[1] = val; + err = s5k83a_write_sensor(sd, S5K83A_GAIN, data, 2); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + *val = (data[0] | 0x40) ? 1 : 0; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + /* set or zero six bit, seven is hflip */ + data[0] = (val) ? (data[0] & 0x80) | 0x40 | S5K83A_FLIP_MASK + : (data[0] & 0x80) | S5K83A_FLIP_MASK; + err = s5k83a_write_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + data[0] = (val) ? 0x0b : 0x0a; + err = s5k83a_write_sensor(sd, S5K83A_VFLIP_TUNE, data, 1); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + *val = (data[0] | 0x80) ? 1 : 0; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + /* set or zero seven bit, six is vflip */ + data[0] = (val) ? (data[0] & 0x40) | 0x80 | S5K83A_FLIP_MASK + : (data[0] & 0x40) | S5K83A_FLIP_MASK; + err = s5k83a_write_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + data[0] = (val) ? 0x0a : 0x0b; + err = s5k83a_write_sensor(sd, S5K83A_HFLIP_TUNE, data, 1); + + return (err < 0) ? err : 0; +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h new file mode 100644 index 00000000000..ee3ee9cfca1 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -0,0 +1,482 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K83A_H_ +#define M5602_S5K83A_H_ + +#include "m5602_sensor.h" + +#define S5K83A_FLIP 0x01 +#define S5K83A_HFLIP_TUNE 0x03 +#define S5K83A_VFLIP_TUNE 0x05 +#define S5K83A_WHITENESS 0x0a +#define S5K83A_GAIN 0x18 +#define S5K83A_BRIGHTNESS 0x1b +#define S5K83A_PAGE_MAP 0xec + +#define S5K83A_DEFAULT_BRIGHTNESS 0x71 +#define S5K83A_DEFAULT_WHITENESS 0x7e +#define S5K83A_DEFAULT_GAIN 0x00 +#define S5K83A_MAXIMUM_GAIN 0x3c +#define S5K83A_FLIP_MASK 0x10 + + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; + +int s5k83a_probe(struct sd *sd); +int s5k83a_init(struct sd *sd); +int s5k83a_power_down(struct sd *sd); + +void s5k83a_dump_registers(struct sd *sd); + +int s5k83a_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int s5k83a_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val); + + +static struct m5602_sensor s5k83a = { + .name = "S5K83A", + .probe = s5k83a_probe, + .init = s5k83a_init, + .power_down = s5k83a_power_down, + .read_sensor = s5k83a_read_sensor, + .write_sensor = s5k83a_write_sensor, + .i2c_slave_id = 0x5a, + .nctrls = 5, + .ctrls = { + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = S5K83A_DEFAULT_BRIGHTNESS, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_brightness, + .get = s5k83a_get_brightness + + }, { + { + .id = V4L2_CID_WHITENESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "whiteness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = S5K83A_DEFAULT_WHITENESS, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_whiteness, + .get = s5k83a_get_whiteness, + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = S5K83A_MAXIMUM_GAIN, + .step = 0x01, + .default_value = S5K83A_DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_gain, + .get = s5k83a_get_gain + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k83a_set_hflip, + .get = s5k83a_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k83a_set_vflip, + .get = s5k83a_get_vflip + } + }, + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_s5k83a[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00} +}; + +/* This could probably be considerably shortened. + I don't have the hardware to experiment with it, patches welcome +*/ +static const unsigned char init_s5k83a[][4] = +{ + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + /* ff ( init value )is very dark) || 71 and f0 better */ + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + /* some values like 0x10 give a blue-purple image */ + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + /* under 80 don't work, highter depend on value */ + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + /* The following sequence is useless after a clean boot + but is necessary after resume from suspend */ + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + /* normal colors + (this is value after boot, but after tries can be different) */ + {SENSOR, 0x00, 0x06, 0x00}, + + /* set default brightness */ + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x01, 0x00}, + {SENSOR_LONG, 0x1b, S5K83A_DEFAULT_BRIGHTNESS >> 3, + S5K83A_DEFAULT_BRIGHTNESS >> 1}, + + /* set default whiteness */ + {SENSOR, S5K83A_WHITENESS, S5K83A_DEFAULT_WHITENESS, 0x00}, + + /* set default gain */ + {SENSOR_LONG, 0x18, 0x00, S5K83A_DEFAULT_GAIN}, + + /* set default flip */ + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, S5K83A_FLIP, 0x00 | S5K83A_FLIP_MASK, 0x00}, + {SENSOR, S5K83A_HFLIP_TUNE, 0x0b, 0x00}, + {SENSOR, S5K83A_VFLIP_TUNE, 0x0a, 0x00} + +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_sensor.h b/drivers/media/video/gspca/m5602/m5602_sensor.h new file mode 100644 index 00000000000..60c9a48e0c0 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_sensor.h @@ -0,0 +1,76 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_SENSOR_H_ +#define M5602_SENSOR_H_ + +#include "m5602_bridge.h" + +#define M5602_DEFAULT_FRAME_WIDTH 640 +#define M5602_DEFAULT_FRAME_HEIGHT 480 + +#define M5602_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10) + +/* Enumerates all supported sensors */ +enum sensors { + OV9650_SENSOR = 1, + S5K83A_SENSOR = 2, + S5K4AA_SENSOR = 3, + MT9M111_SENSOR = 4, + PO1030_SENSOR = 5 +}; + +/* Enumerates all possible instruction types */ +enum instruction { + BRIDGE, + SENSOR, + SENSOR_LONG +}; + +struct m5602_sensor { + /* Defines the name of a sensor */ + char name[32]; + + /* What i2c address the sensor is connected to */ + u8 i2c_slave_id; + + /* Probes if the sensor is connected */ + int (*probe)(struct sd *sd); + + /* Performs a initialization sequence */ + int (*init)(struct sd *sd); + + /* Performs a power down sequence */ + int (*power_down)(struct sd *sd); + + /* Reads a sensor register */ + int (*read_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + /* Writes to a sensor register */ + int (*write_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + int nctrls; + struct ctrl ctrls[M5602_MAX_CTRLS]; + + char nmodes; + struct v4l2_pix_format modes[]; +}; + +#endif diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index 4d5db47ba8c..277ca34a881 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -134,7 +134,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int err_code; __u8 *data; @@ -143,9 +143,10 @@ static void sd_start(struct gspca_dev *gspca_dev) int intpipe; PDEBUG(D_STREAM, "camera start, iface %d, alt 8", gspca_dev->iface); - if (usb_set_interface(gspca_dev->dev, gspca_dev->iface, 8) < 0) { + err_code = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 8); + if (err_code < 0) { PDEBUG(D_ERR|D_STREAM, "Set packet size: set interface error"); - return; + return err_code; } data = gspca_dev->usb_buf; @@ -154,7 +155,7 @@ static void sd_start(struct gspca_dev *gspca_dev) err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; /* Initialize the MR97113 chip register @@ -180,14 +181,14 @@ static void sd_start(struct gspca_dev *gspca_dev) err_code = reg_w(gspca_dev, data[0], 11); if (err_code < 0) - return; + return err_code; data[0] = 0x23; /* address */ data[1] = 0x09; /* reg 35, append frame header */ err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; data[0] = 0x3c; /* address */ /* if (gspca_dev->width == 1280) */ @@ -198,7 +199,7 @@ static void sd_start(struct gspca_dev *gspca_dev) * (unit: 4KB) 200KB */ err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; if (0) { /* fixed dark-gain */ data[1] = 0; /* reg 94, Y Gain (1.75) */ @@ -240,13 +241,13 @@ static void sd_start(struct gspca_dev *gspca_dev) err_code = reg_w(gspca_dev, data[0], 6); if (err_code < 0) - return; + return err_code; data[0] = 0x67; data[1] = 0x13; /* reg 103, first pixel B, disable sharpness */ err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; /* * initialize the value of MI sensor... @@ -326,6 +327,7 @@ static void sd_start(struct gspca_dev *gspca_dev) data[0] = 0x00; data[1] = 0x4d; /* ISOC transfering enable... */ reg_w(gspca_dev, data[0], 2); + return err_code; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 4df4eec9f7e..ca671194679 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -1854,7 +1854,7 @@ static int set_ov_sensor_window(struct sd *sd) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int ret; @@ -1871,9 +1871,10 @@ static void sd_start(struct gspca_dev *gspca_dev) goto out; PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt); ov51x_led_control(sd, 1); - return; + return 0; out: PDEBUG(D_ERR, "camera start error:%d", ret); + return ret; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 83b5f740c94..0b0c573d06d 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -281,7 +281,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 mode; @@ -323,6 +323,7 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->sof_read = 0; sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -534,6 +535,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2470)}, {USB_DEVICE(0x093a, 0x2471)}, {USB_DEVICE(0x093a, 0x2472)}, + {USB_DEVICE(0x093a, 0x2476)}, {USB_DEVICE(0x2001, 0xf115)}, {} }; diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index ba865b7f1ed..e5ff9a6199e 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -675,7 +675,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -724,6 +724,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x01); else reg_w(gspca_dev, 0x78, 0x05); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 12b81ae526b..6c69bc7778f 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -490,7 +490,7 @@ static const __u8 tas5130_sensor_init[][8] = { {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}, }; -struct sensor_data sensor_data[] = { +static struct sensor_data sensor_data[] = { SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, @@ -892,7 +892,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam = &gspca_dev->cam; @@ -976,6 +976,7 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->frames_to_drop = 0; sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 572b0f363b6..53cb82d9e7c 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -39,6 +39,7 @@ struct sd { unsigned char contrast; unsigned char colors; unsigned char autogain; + __u8 vflip; /* ov7630 only */ signed char ag_cnt; #define AG_CNT_START 13 @@ -70,6 +71,8 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { { @@ -131,6 +134,22 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, +/* ov7630 only */ +#define VFLIP_IDX 4 + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEF 1 + .default_value = VFLIP_DEF, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, }; static struct v4l2_pix_format vga_mode[] = { @@ -248,10 +267,12 @@ static const __u8 gamma_def[] = { 0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff }; +/* color matrix and offsets */ static const __u8 reg84[] = { - 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f, - 0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f, - 0xf7, 0x0f, 0x00, 0x00, 0x00 + 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, /* YR YG YB gains */ + 0xe8, 0x0f, 0xda, 0x0f, 0x40, 0x00, /* UR UG UB */ + 0x3e, 0x00, 0xcd, 0x0f, 0xf7, 0x0f, /* VR VG VB */ + 0x00, 0x00, 0x00 /* YUV offsets */ }; static const __u8 hv7131r_sensor_init[][8] = { {0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10}, @@ -434,7 +455,8 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, /*fixme: + 0x12, 0x04*/ - {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10}, +/* {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10}, * COMN + * set by setvflip */ {0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, @@ -949,6 +971,8 @@ static int sd_config(struct gspca_dev *gspca_dev, gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX); break; } + if (sd->sensor != SENSOR_OV7630) + gspca_dev->ctrl_dis |= (1 << VFLIP_IDX); return 0; } @@ -1080,20 +1104,17 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev, static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - unsigned val; + int val; __u8 reg84_full[0x15]; - memset(reg84_full, 0, sizeof reg84_full); - val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10; /* 10..30 */ - reg84_full[2] = val; - reg84_full[0] = (val + 1) / 2; - reg84_full[4] = (val + 1) / 5; - if (val > BRIGHTNESS_DEF) - val = (sd->brightness - BRIGHTNESS_DEF) * 0x20 + memcpy(reg84_full, reg84, sizeof reg84_full); + val = sd->contrast * 0x30 / CONTRAST_MAX + 0x10; /* 10..40 */ + reg84_full[0] = (val + 1) / 2; /* red */ + reg84_full[2] = val; /* green */ + reg84_full[4] = (val + 1) / 5; /* blue */ + val = (sd->brightness - BRIGHTNESS_DEF) * 0x10 / BRIGHTNESS_MAX; - else - val = 0; - reg84_full[0x12] = val; /* 00..1f */ + reg84_full[0x12] = val & 0x1f; /* 5:0 signed value */ reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full); } @@ -1172,8 +1193,16 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->ag_cnt = -1; } +static void setvflip(struct sd *sd) +{ + if (sd->sensor != SENSOR_OV7630) + return; + i2c_w1(&sd->gspca_dev, 0x75, /* COMN */ + sd->vflip ? 0x82 : 0x02); +} + /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i; @@ -1263,6 +1292,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; case SENSOR_OV7630: ov7630_InitSensor(gspca_dev); + setvflip(sd); reg17 = 0xe2; reg1 = 0x44; break; @@ -1320,12 +1350,16 @@ static void sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); break; + case SENSOR_OV7630: + setvflip(sd); + /* fall thru */ default: /* OV76xx */ setbrightcont(gspca_dev); break; } setautogain(gspca_dev); reg_w1(gspca_dev, 0x01, reg1); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -1546,6 +1580,24 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + if (gspca_dev->streaming) + setvflip(sd); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->vflip; + return 0; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -1567,6 +1619,7 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)}, + {USB_DEVICE(0x0458, 0x702e), BSI(SN9C120, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x0471, 0x0327), BSI(SN9C105, MI0360, 0x5d)}, @@ -1588,7 +1641,9 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x60fa), BSI(SN9C105, OV7648, 0x??)}, */ {USB_DEVICE(0x0c45, 0x60fb), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x0c45, 0x60fc), BSI(SN9C105, HV7131R, 0x11)}, -/* {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x??)}, */ +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE + {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x21)}, +#endif /* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */ diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 6e733901fcc..bca106c153f 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -660,7 +660,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int err; @@ -867,6 +867,7 @@ static void sd_start(struct gspca_dev *gspca_dev) write_vector(gspca_dev, Clicksmart510_defaults); break; } + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index e9eb59bae4f..b742f260c7c 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -1980,7 +1980,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int mode; @@ -2012,6 +2012,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); setcolors(gspca_dev); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index f601daf19eb..b345749213c 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -688,7 +688,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int ret; @@ -733,6 +733,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg_write(dev, 0x5, 0x0, 0x0); */ /* reg_write(dev, 0x5, 0x0, 0x1); */ /* reg_write(dev, 0x5, 0x11, 0x2); */ + return ret; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index 195dce96ef0..645ee9d44d0 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -422,7 +422,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; __u16 norme; @@ -549,6 +549,7 @@ static void sd_start(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "webcam started"); spca506_GetNormeInput(gspca_dev, &norme, &channel); spca506_SetNormeInput(gspca_dev, norme, channel); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 281ce02103a..63ec902c895 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1528,7 +1528,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int mode; @@ -1546,6 +1546,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; } reg_write(gspca_dev->dev, 0x8112, 0x10 | 0x20); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 95fcfcb9e31..020a03c466c 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -152,7 +152,7 @@ static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value) ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0, /* request */ - USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, NULL, 0, 500); PDEBUG(D_USBO, "reg write: 0x%02x:0x%02x", index, value); if (ret < 0) @@ -699,7 +699,7 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->ag_cnt = -1; } -static void sd_start_12a(struct gspca_dev *gspca_dev) +static int sd_start_12a(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */ @@ -725,8 +725,9 @@ static void sd_start_12a(struct gspca_dev *gspca_dev) setwhite(gspca_dev); setautogain(gspca_dev); setexposure(gspca_dev); + return 0; } -static void sd_start_72a(struct gspca_dev *gspca_dev) +static int sd_start_72a(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int Clck; @@ -750,6 +751,7 @@ static void sd_start_72a(struct gspca_dev *gspca_dev) reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */ reg_w_val(dev, 0x8112, 0x10 | 0x20); setautogain(gspca_dev); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -1064,7 +1066,7 @@ static struct ctrl sd_ctrls_12a[] = { { .id = V4L2_CID_DO_WHITE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "While Balance", + .name = "White Balance", .minimum = WHITE_MIN, .maximum = WHITE_MAX, .step = 1, diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 2f2de429e27..d9d64911f22 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -324,7 +324,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int ret, value; @@ -374,9 +374,10 @@ static void sd_start(struct gspca_dev *gspca_dev) set_par(gspca_dev, 0x01000000); set_par(gspca_dev, 0x01000000); PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt); - return; + return 0; out: PDEBUG(D_ERR|D_STREAM, "camera start err %d", ret); + return ret; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 1cfcc6c4955..bd9288665a8 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -961,7 +961,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; @@ -1042,6 +1042,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; } sp5xx_initContBrigHueRegisters(gspca_dev); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index f034c748fc7..eac245d7a75 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -28,8 +28,6 @@ #include "gspca.h" -#define MAX_GAMMA 0x10 /* 0 to 15 */ - #define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0) MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>"); @@ -49,6 +47,10 @@ struct sd { unsigned char whitebalance; unsigned char mirror; unsigned char effect; + + __u8 sensor; +#define SENSOR_TAS5130A 0 +#define SENSOR_OM6802 1 }; /* V4L2 controls supported by the driver */ @@ -83,9 +85,9 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Brightness", .minimum = 0, - .maximum = 0x0f, + .maximum = 14, .step = 1, - .default_value = 0x09, + .default_value = 8, }, .set = sd_setbrightness, .get = sd_getbrightness, @@ -118,16 +120,17 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, -#define SD_GAMMA 3 +#define GAMMA_MAX 16 +#define GAMMA_DEF 10 { { .id = V4L2_CID_GAMMA, /* (gamma on win) */ .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Gamma (Untested)", + .name = "Gamma", .minimum = 0, - .maximum = MAX_GAMMA, + .maximum = GAMMA_MAX - 1, .step = 1, - .default_value = 0x09, + .default_value = GAMMA_DEF, }, .set = sd_setgamma, .get = sd_getgamma, @@ -185,7 +188,7 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, - .default_value = 1, + .default_value = 0, }, .set = sd_setwhitebalance, .get = sd_getwhitebalance @@ -197,7 +200,7 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Sharpness", .minimum = 0, - .maximum = MAX_GAMMA, /* 0 to 16 */ + .maximum = 15, .step = 1, .default_value = 0x06, }, @@ -258,7 +261,59 @@ static struct v4l2_pix_format vga_mode_t16[] = { .priv = 0}, }; -#define T16_OFFSET_DATA 631 +/* sensor specific data */ +struct additional_sensor_data { + const __u8 data1[20]; + const __u8 data2[18]; + const __u8 data3[18]; + const __u8 data4[4]; + const __u8 data5[6]; + const __u8 stream[4]; +}; + +const static struct additional_sensor_data sensor_data[] = { + { /* TAS5130A */ + .data1 = + {0xd0, 0xbb, 0xd1, 0x28, 0xd2, 0x10, 0xd3, 0x10, + 0xd4, 0xbb, 0xd5, 0x28, 0xd6, 0x1e, 0xd7, 0x27, + 0xd8, 0xc8, 0xd9, 0xfc}, + .data2 = + {0xe0, 0x60, 0xe1, 0xa8, 0xe2, 0xe0, 0xe3, 0x60, + 0xe4, 0xa8, 0xe5, 0xe0, 0xe6, 0x60, 0xe7, 0xa8, + 0xe8, 0xe0}, + .data3 = + {0xc7, 0x60, 0xc8, 0xa8, 0xc9, 0xe0, 0xca, 0x60, + 0xcb, 0xa8, 0xcc, 0xe0, 0xcd, 0x60, 0xce, 0xa8, + 0xcf, 0xe0}, + .data4 = /* Freq (50/60Hz). Splitted for test purpose */ + {0x66, 0x00, 0xa8, 0xe8}, + .data5 = + {0x0c, 0x03, 0xab, 0x10, 0x81, 0x20}, + .stream = + {0x0b, 0x04, 0x0a, 0x40}, + }, + { /* OM6802 */ + .data1 = + {0xd0, 0xc2, 0xd1, 0x28, 0xd2, 0x0f, 0xd3, 0x22, + 0xd4, 0xcd, 0xd5, 0x27, 0xd6, 0x2c, 0xd7, 0x06, + 0xd8, 0xb3, 0xd9, 0xfc}, + .data2 = + {0xe0, 0x80, 0xe1, 0xff, 0xe2, 0xff, 0xe3, 0x80, + 0xe4, 0xff, 0xe5, 0xff, 0xe6, 0x80, 0xe7, 0xff, + 0xe8, 0xff}, + .data3 = + {0xc7, 0x80, 0xc8, 0xff, 0xc9, 0xff, 0xca, 0x80, + 0xcb, 0xff, 0xcc, 0xff, 0xcd, 0x80, 0xce, 0xff, + 0xcf, 0xff}, + .data4 = /*Freq (50/60Hz). Splitted for test purpose */ + {0x66, 0xca, 0xa8, 0xf0 }, + .data5 = /* this could be removed later */ + {0x0c, 0x03, 0xab, 0x13, 0x81, 0x23}, + .stream = + {0x0b, 0x04, 0x0a, 0x78}, + } +}; + #define MAX_EFFECTS 7 /* easily done by soft, this table could be removed, * i keep it here just in case */ @@ -272,87 +327,87 @@ static const __u8 effects_table[MAX_EFFECTS][6] = { {0xa8, 0xc8, 0xc6, 0xd2, 0xc0, 0x40}, /* Negative */ }; -static const __u8 gamma_table[MAX_GAMMA][34] = { - {0x90, 0x00, 0x91, 0x3e, 0x92, 0x69, 0x93, 0x85, +static const __u8 gamma_table[GAMMA_MAX][34] = { + {0x90, 0x00, 0x91, 0x3e, 0x92, 0x69, 0x93, 0x85, /* 0 */ 0x94, 0x95, 0x95, 0xa1, 0x96, 0xae, 0x97, 0xb9, 0x98, 0xc2, 0x99, 0xcb, 0x9a, 0xd4, 0x9b, 0xdb, 0x9c, 0xe3, 0x9d, 0xea, 0x9e, 0xf1, 0x9f, 0xf8, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x33, 0x92, 0x5A, 0x93, 0x75, - 0x94, 0x85, 0x95, 0x93, 0x96, 0xA1, 0x97, 0xAD, - 0x98, 0xB7, 0x99, 0xC2, 0x9A, 0xCB, 0x9B, 0xD4, - 0x9C, 0xDE, 0x9D, 0xE7, 0x9E, 0xF0, 0x9F, 0xF7, + {0x90, 0x00, 0x91, 0x33, 0x92, 0x5a, 0x93, 0x75, /* 1 */ + 0x94, 0x85, 0x95, 0x93, 0x96, 0xa1, 0x97, 0xad, + 0x98, 0xb7, 0x99, 0xc2, 0x9a, 0xcb, 0x9b, 0xd4, + 0x9c, 0xde, 0x9D, 0xe7, 0x9e, 0xf0, 0x9f, 0xf7, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x2F, 0x92, 0x51, 0x93, 0x6B, - 0x94, 0x7C, 0x95, 0x8A, 0x96, 0x99, 0x97, 0xA6, - 0x98, 0xB1, 0x99, 0xBC, 0x9A, 0xC6, 0x9B, 0xD0, - 0x9C, 0xDB, 0x9D, 0xE4, 0x9E, 0xED, 0x9F, 0xF6, + {0x90, 0x00, 0x91, 0x2f, 0x92, 0x51, 0x93, 0x6b, /* 2 */ + 0x94, 0x7c, 0x95, 0x8a, 0x96, 0x99, 0x97, 0xa6, + 0x98, 0xb1, 0x99, 0xbc, 0x9a, 0xc6, 0x9b, 0xd0, + 0x9c, 0xdb, 0x9d, 0xe4, 0x9e, 0xed, 0x9f, 0xf6, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x29, 0x92, 0x48, 0x93, 0x60, - 0x94, 0x72, 0x95, 0x81, 0x96, 0x90, 0x97, 0x9E, - 0x98, 0xAA, 0x99, 0xB5, 0x9A, 0xBF, 0x9B, 0xCB, - 0x9C, 0xD6, 0x9D, 0xE1, 0x9E, 0xEB, 0x9F, 0xF5, + {0x90, 0x00, 0x91, 0x29, 0x92, 0x48, 0x93, 0x60, /* 3 */ + 0x94, 0x72, 0x95, 0x81, 0x96, 0x90, 0x97, 0x9e, + 0x98, 0xaa, 0x99, 0xb5, 0x9a, 0xbf, 0x9b, 0xcb, + 0x9c, 0xd6, 0x9d, 0xe1, 0x9e, 0xeb, 0x9f, 0xf5, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x23, 0x92, 0x3F, 0x93, 0x55, + {0x90, 0x00, 0x91, 0x23, 0x92, 0x3f, 0x93, 0x55, /* 4 */ 0x94, 0x68, 0x95, 0x77, 0x96, 0x86, 0x97, 0x95, - 0x98, 0xA2, 0x99, 0xAD, 0x9A, 0xB9, 0x9B, 0xC6, - 0x9C, 0xD2, 0x9D, 0xDE, 0x9E, 0xE9, 0x9F, 0xF4, + 0x98, 0xa2, 0x99, 0xad, 0x9a, 0xb9, 0x9b, 0xc6, + 0x9c, 0xd2, 0x9d, 0xde, 0x9e, 0xe9, 0x9f, 0xf4, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x1B, 0x92, 0x33, 0x93, 0x48, + {0x90, 0x00, 0x91, 0x1b, 0x92, 0x33, 0x93, 0x48, /* 5 */ 0x94, 0x59, 0x95, 0x69, 0x96, 0x79, 0x97, 0x87, - 0x98, 0x96, 0x99, 0xA3, 0x9A, 0xB1, 0x9B, 0xBE, - 0x9C, 0xCC, 0x9D, 0xDA, 0x9E, 0xE7, 0x9F, 0xF3, + 0x98, 0x96, 0x99, 0xa3, 0x9a, 0xb1, 0x9b, 0xbe, + 0x9c, 0xcc, 0x9d, 0xda, 0x9e, 0xe7, 0x9f, 0xf3, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x02, 0x92, 0x10, 0x93, 0x20, + {0x90, 0x00, 0x91, 0x02, 0x92, 0x10, 0x93, 0x20, /* 6 */ 0x94, 0x32, 0x95, 0x40, 0x96, 0x57, 0x97, 0x67, 0x98, 0x77, 0x99, 0x88, 0x9a, 0x99, 0x9b, 0xaa, 0x9c, 0xbb, 0x9d, 0xcc, 0x9e, 0xdd, 0x9f, 0xee, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x02, 0x92, 0x14, 0x93, 0x26, - 0x94, 0x38, 0x95, 0x4A, 0x96, 0x60, 0x97, 0x70, - 0x98, 0x80, 0x99, 0x90, 0x9A, 0xA0, 0x9B, 0xB0, - 0x9C, 0xC0, 0x9D, 0xD0, 0x9E, 0xE0, 0x9F, 0xF0, + {0x90, 0x00, 0x91, 0x02, 0x92, 0x14, 0x93, 0x26, /* 7 */ + 0x94, 0x38, 0x95, 0x4a, 0x96, 0x60, 0x97, 0x70, + 0x98, 0x80, 0x99, 0x90, 0x9a, 0xa0, 0x9b, 0xb0, + 0x9c, 0xc0, 0x9D, 0xd0, 0x9e, 0xe0, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x10, 0x92, 0x22, 0x93, 0x35, - 0x94, 0x47, 0x95, 0x5A, 0x96, 0x69, 0x97, 0x79, - 0x98, 0x88, 0x99, 0x97, 0x9A, 0xA7, 0x9B, 0xB6, - 0x9C, 0xC4, 0x9D, 0xD3, 0x9E, 0xE0, 0x9F, 0xF0, + {0x90, 0x00, 0x91, 0x10, 0x92, 0x22, 0x93, 0x35, /* 8 */ + 0x94, 0x47, 0x95, 0x5a, 0x96, 0x69, 0x97, 0x79, + 0x98, 0x88, 0x99, 0x97, 0x9a, 0xa7, 0x9b, 0xb6, + 0x9c, 0xc4, 0x9d, 0xd3, 0x9e, 0xe0, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x10, 0x92, 0x26, 0x93, 0x40, + {0x90, 0x00, 0x91, 0x10, 0x92, 0x26, 0x93, 0x40, /* 9 */ 0x94, 0x54, 0x95, 0x65, 0x96, 0x75, 0x97, 0x84, 0x98, 0x93, 0x99, 0xa1, 0x9a, 0xb0, 0x9b, 0xbd, 0x9c, 0xca, 0x9d, 0xd6, 0x9e, 0xe0, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x18, 0x92, 0x2B, 0x93, 0x44, - 0x94, 0x60, 0x95, 0x70, 0x96, 0x80, 0x97, 0x8E, - 0x98, 0x9C, 0x99, 0xAA, 0x9A, 0xB7, 0x9B, 0xC4, - 0x9C, 0xD0, 0x9D, 0xD8, 0x9E, 0xE2, 0x9F, 0xF0, + {0x90, 0x00, 0x91, 0x18, 0x92, 0x2b, 0x93, 0x44, /* 10 */ + 0x94, 0x60, 0x95, 0x70, 0x96, 0x80, 0x97, 0x8e, + 0x98, 0x9c, 0x99, 0xaa, 0x9a, 0xb7, 0x9b, 0xc4, + 0x9c, 0xd0, 0x9d, 0xd8, 0x9e, 0xe2, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x1A, 0x92, 0x34, 0x93, 0x52, - 0x94, 0x66, 0x95, 0x7E, 0x96, 0x8D, 0x97, 0x9B, - 0x98, 0xA8, 0x99, 0xB4, 0x9A, 0xC0, 0x9B, 0xCB, - 0x9C, 0xD6, 0x9D, 0xE1, 0x9E, 0xEB, 0x9F, 0xF5, + {0x90, 0x00, 0x91, 0x1a, 0x92, 0x34, 0x93, 0x52, /* 11 */ + 0x94, 0x66, 0x95, 0x7e, 0x96, 0x8D, 0x97, 0x9B, + 0x98, 0xa8, 0x99, 0xb4, 0x9a, 0xc0, 0x9b, 0xcb, + 0x9c, 0xd6, 0x9d, 0xe1, 0x9e, 0xeb, 0x9f, 0xf5, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x3F, 0x92, 0x5A, 0x93, 0x6E, - 0x94, 0x7F, 0x95, 0x8E, 0x96, 0x9C, 0x97, 0xA8, - 0x98, 0xB4, 0x99, 0xBF, 0x9A, 0xC9, 0x9B, 0xD3, - 0x9C, 0xDC, 0x9D, 0xE5, 0x9E, 0xEE, 0x9F, 0xF6, - 0xA0, 0xFF}, - {0x90, 0x00, 0x91, 0x54, 0x92, 0x6F, 0x93, 0x83, - 0x94, 0x93, 0x95, 0xA0, 0x96, 0xAD, 0x97, 0xB7, - 0x98, 0xC2, 0x99, 0xCB, 0x9A, 0xD4, 0x9B, 0xDC, - 0x9C, 0xE4, 0x9D, 0xEB, 0x9E, 0xF2, 0x9F, 0xF9, + {0x90, 0x00, 0x91, 0x3f, 0x92, 0x5a, 0x93, 0x6e, /* 12 */ + 0x94, 0x7f, 0x95, 0x8e, 0x96, 0x9c, 0x97, 0xa8, + 0x98, 0xb4, 0x99, 0xbf, 0x9a, 0xc9, 0x9b, 0xd3, + 0x9c, 0xdc, 0x9d, 0xe5, 0x9e, 0xee, 0x9f, 0xf6, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x6E, 0x92, 0x88, 0x93, 0x9A, - 0x94, 0xA8, 0x95, 0xB3, 0x96, 0xBD, 0x97, 0xC6, - 0x98, 0xCF, 0x99, 0xD6, 0x9A, 0xDD, 0x9B, 0xE3, - 0x9C, 0xE9, 0x9D, 0xEF, 0x9E, 0xF4, 0x9F, 0xFA, + {0x90, 0x00, 0x91, 0x54, 0x92, 0x6f, 0x93, 0x83, /* 13 */ + 0x94, 0x93, 0x95, 0xa0, 0x96, 0xad, 0x97, 0xb7, + 0x98, 0xc2, 0x99, 0xcb, 0x9a, 0xd4, 0x9b, 0xdc, + 0x9c, 0xe4, 0x9d, 0xeb, 0x9e, 0xf2, 0x9f, 0xf9, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x93, 0x92, 0xA8, 0x93, 0xB7, - 0x94, 0xC1, 0x95, 0xCA, 0x96, 0xD2, 0x97, 0xD8, - 0x98, 0xDE, 0x99, 0xE3, 0x9A, 0xE8, 0x9B, 0xED, - 0x9C, 0xF1, 0x9D, 0xF5, 0x9E, 0xF8, 0x9F, 0xFC, - 0xA0, 0xFF} + {0x90, 0x00, 0x91, 0x6e, 0x92, 0x88, 0x93, 0x9a, /* 14 */ + 0x94, 0xa8, 0x95, 0xb3, 0x96, 0xbd, 0x97, 0xc6, + 0x98, 0xcf, 0x99, 0xd6, 0x9a, 0xdd, 0x9b, 0xe3, + 0x9c, 0xe9, 0x9d, 0xef, 0x9e, 0xf4, 0x9f, 0xfa, + 0xa0, 0xff}, + {0x90, 0x00, 0x91, 0x93, 0x92, 0xa8, 0x93, 0xb7, /* 15 */ + 0x94, 0xc1, 0x95, 0xca, 0x96, 0xd2, 0x97, 0xd8, + 0x98, 0xde, 0x99, 0xe3, 0x9a, 0xe8, 0x9b, 0xed, + 0x9c, 0xf1, 0x9d, 0xf5, 0x9e, 0xf8, 0x9f, 0xfc, + 0xa0, 0xff} }; static const __u8 tas5130a_sensor_init[][8] = { @@ -363,8 +418,10 @@ static const __u8 tas5130a_sensor_init[][8] = { {}, }; +static __u8 sensor_reset[] = {0x61, 0x68, 0x62, 0xff, 0x60, 0x07}; + /* read 1 byte */ -static int reg_r_1(struct gspca_dev *gspca_dev, +static int reg_r(struct gspca_dev *gspca_dev, __u16 index) { usb_control_msg(gspca_dev->dev, @@ -378,26 +435,26 @@ static int reg_r_1(struct gspca_dev *gspca_dev, } static void reg_w(struct gspca_dev *gspca_dev, - __u16 value, - __u16 index, - const __u8 *buffer, __u16 len) + __u16 index) +{ + usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, + NULL, 0, 500); +} + +static void reg_w_buf(struct gspca_dev *gspca_dev, + const __u8 *buffer, __u16 len) { - if (buffer == NULL) { - usb_control_msg(gspca_dev->dev, - usb_sndctrlpipe(gspca_dev->dev, 0), - 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, index, - NULL, 0, 500); - return; - } if (len <= USB_BUF_SZ) { memcpy(gspca_dev->usb_buf, buffer, len); usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, index, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x01, 0, gspca_dev->usb_buf, len, 500); } else { __u8 *tmpbuf; @@ -407,13 +464,72 @@ static void reg_w(struct gspca_dev *gspca_dev, usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, index, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x01, 0, tmpbuf, len, 500); kfree(tmpbuf); } } +/* Reported as OM6802*/ +static void om6802_sensor_init(struct gspca_dev *gspca_dev) +{ + int i; + const __u8 *p; + __u8 byte; + __u8 val[6] = {0x62, 0, 0x64, 0, 0x60, 0x05}; + static const __u8 sensor_init[] = { + 0xdf, 0x6d, + 0xdd, 0x18, + 0x5a, 0xe0, + 0x5c, 0x07, + 0x5d, 0xb0, + 0x5e, 0x1e, + 0x60, 0x71, + 0xef, 0x00, + 0xe9, 0x00, + 0xea, 0x00, + 0x90, 0x24, + 0x91, 0xb2, + 0x82, 0x32, + 0xfd, 0x41, + 0x00 /* table end */ + }; + + reg_w_buf(gspca_dev, sensor_reset, sizeof sensor_reset); + msleep(5); + i = 4; + while (--i < 0) { + byte = reg_r(gspca_dev, 0x0060); + if (!(byte & 0x01)) + break; + msleep(100); + } + byte = reg_r(gspca_dev, 0x0063); + if (byte != 0x17) { + err("Bad sensor reset %02x", byte); + /* continue? */ + } + + p = sensor_init; + while (*p != 0) { + val[1] = *p++; + val[3] = *p++; + if (*p == 0) + reg_w(gspca_dev, 0x3c80); + reg_w_buf(gspca_dev, val, sizeof val); + i = 4; + while (--i >= 0) { + msleep(15); + byte = reg_r(gspca_dev, 0x60); + if (!(byte & 0x01)) + break; + } + } + msleep(15); + reg_w(gspca_dev, 0x3c80); +} + /* this function is called at probe time */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) @@ -430,7 +546,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value; - sd->gamma = sd_ctrls[SD_GAMMA].qctrl.default_value; + sd->gamma = GAMMA_DEF; sd->mirror = sd_ctrls[SD_MIRROR].qctrl.default_value; sd->freq = sd_ctrls[SD_LIGHTFREQ].qctrl.default_value; sd->whitebalance = sd_ctrls[SD_WHITE_BALANCE].qctrl.default_value; @@ -439,27 +555,98 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -static int init_default_parameters(struct gspca_dev *gspca_dev) +static void setbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + unsigned int brightness; + __u8 set6[4] = { 0x8f, 0x24, 0xc3, 0x00 }; + + brightness = sd->brightness; + if (brightness < 7) { + set6[1] = 0x26; + set6[3] = 0x70 - brightness * 0x10; + } else { + set6[3] = 0x00 + ((brightness - 7) * 0x10); + } + + reg_w_buf(gspca_dev, set6, sizeof set6); +} + +static void setcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + unsigned int contrast = sd->contrast; + __u16 reg_to_write; + + if (contrast < 7) + reg_to_write = 0x8ea9 - contrast * 0x200; + else + reg_to_write = 0x00a9 + (contrast - 7) * 0x200; + + reg_w(gspca_dev, reg_to_write); +} + +static void setcolors(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u16 reg_to_write; + + reg_to_write = 0x80bb + sd->colors * 0x100; /* was 0xc0 */ + reg_w(gspca_dev, reg_to_write); +} + +static void setgamma(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_CONF, "Gamma: %d", sd->gamma); + reg_w_buf(gspca_dev, gamma_table[sd->gamma], sizeof gamma_table[0]); +} + +static void setwhitebalance(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + __u8 white_balance[8] = + {0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38}; + + if (sd->whitebalance) + white_balance[7] = 0x3c; + + reg_w_buf(gspca_dev, white_balance, sizeof white_balance); +} + +static void setsharpness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u16 reg_to_write; + + reg_to_write = 0x0aa6 + 0x1000 * sd->sharpness; + + reg_w(gspca_dev, reg_to_write); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { /* some of this registers are not really neded, because * they are overriden by setbrigthness, setcontrast, etc, * but wont hurt anyway, and can help someone with similar webcam * to see the initial parameters.*/ - int i = 0; - __u8 test_byte; + struct sd *sd = (struct sd *) gspca_dev; + int i; + __u8 byte, test_byte; static const __u8 read_indexs[] = { 0x06, 0x07, 0x0a, 0x0b, 0x66, 0x80, 0x81, 0x8e, 0x8f, 0xa5, 0xa6, 0xa8, 0xbb, 0xbc, 0xc6, 0x00, 0x00 }; - static const __u8 n1[6] = + static const __u8 n1[] = {0x08, 0x03, 0x09, 0x03, 0x12, 0x04}; - static const __u8 n2[2] = + static const __u8 n2[] = {0x08, 0x00}; - static const __u8 nset[6] = - { 0x61, 0x68, 0x62, 0xff, 0x60, 0x07 }; - static const __u8 n3[6] = + static const __u8 n3[] = {0x61, 0x68, 0x65, 0x0a, 0x60, 0x04}; - static const __u8 n4[0x46] = + static const __u8 n4[] = {0x09, 0x01, 0x12, 0x04, 0x66, 0x8a, 0x80, 0x3c, 0x81, 0x22, 0x84, 0x50, 0x8a, 0x78, 0x8b, 0x68, 0x8c, 0x88, 0x8e, 0x33, 0x8f, 0x24, 0xaa, 0xb1, @@ -469,131 +656,113 @@ static int init_default_parameters(struct gspca_dev *gspca_dev) 0x65, 0x0a, 0xbb, 0x86, 0xaf, 0x58, 0xb0, 0x68, 0x87, 0x40, 0x89, 0x2b, 0x8d, 0xff, 0x83, 0x40, 0xac, 0x84, 0xad, 0x86, 0xaf, 0x46}; - static const __u8 nset4[18] = { - 0xe0, 0x60, 0xe1, 0xa8, 0xe2, 0xe0, 0xe3, 0x60, 0xe4, 0xa8, - 0xe5, 0xe0, 0xe6, 0x60, 0xe7, 0xa8, - 0xe8, 0xe0 - }; - /* ojo puede ser 0xe6 en vez de 0xe9 */ - static const __u8 nset2[20] = { - 0xd0, 0xbb, 0xd1, 0x28, 0xd2, 0x10, 0xd3, 0x10, 0xd4, 0xbb, - 0xd5, 0x28, 0xd6, 0x1e, 0xd7, 0x27, - 0xd8, 0xc8, 0xd9, 0xfc - }; - static const __u8 missing[8] = - { 0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38 }; - static const __u8 nset3[18] = { - 0xc7, 0x60, 0xc8, 0xa8, 0xc9, 0xe0, 0xca, 0x60, 0xcb, 0xa8, - 0xcc, 0xe0, 0xcd, 0x60, 0xce, 0xa8, - 0xcf, 0xe0 - }; - static const __u8 nset5[4] = - { 0x8f, 0x24, 0xc3, 0x00 }; /* bright */ - static const __u8 nset6[34] = { - 0x90, 0x00, 0x91, 0x1c, 0x92, 0x30, 0x93, 0x43, 0x94, 0x54, - 0x95, 0x65, 0x96, 0x75, 0x97, 0x84, - 0x98, 0x93, 0x99, 0xa1, 0x9a, 0xb0, 0x9b, 0xbd, 0x9c, 0xca, - 0x9d, 0xd8, 0x9e, 0xe5, 0x9f, 0xf2, - 0xa0, 0xff - }; /* Gamma */ - static const __u8 nset7[4] = - { 0x66, 0xca, 0xa8, 0xf8 }; /* 50/60 Hz */ static const __u8 nset9[4] = { 0x0b, 0x04, 0x0a, 0x78 }; static const __u8 nset8[6] = { 0xa8, 0xf0, 0xc6, 0x88, 0xc0, 0x00 }; - static const __u8 nset10[6] = - { 0x0c, 0x03, 0xab, 0x10, 0x81, 0x20 }; - reg_w(gspca_dev, 0x01, 0x0000, n1, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, nset, 0x06); - reg_r_1(gspca_dev, 0x0063); - reg_w(gspca_dev, 0x01, 0x0000, n2, 0x02); + byte = reg_r(gspca_dev, 0x06); + test_byte = reg_r(gspca_dev, 0x07); + if (byte == 0x08 && test_byte == 0x07) { + PDEBUG(D_CONF, "sensor om6802"); + sd->sensor = SENSOR_OM6802; + } else if (byte == 0x08 && test_byte == 0x01) { + PDEBUG(D_CONF, "sensor tas5130a"); + sd->sensor = SENSOR_TAS5130A; + } else { + PDEBUG(D_CONF, "unknown sensor %02x %02x", byte, test_byte); + sd->sensor = SENSOR_TAS5130A; + } + reg_w_buf(gspca_dev, n1, sizeof n1); + test_byte = 0; + i = 5; + while (--i >= 0) { + reg_w_buf(gspca_dev, sensor_reset, sizeof sensor_reset); + test_byte = reg_r(gspca_dev, 0x0063); + msleep(100); + if (test_byte == 0x17) + break; /* OK */ + } + if (i < 0) { + err("Bad sensor reset %02x", test_byte); +/* return -EIO; */ +/*fixme: test - continue */ + } + reg_w_buf(gspca_dev, n2, sizeof n2); + + i = 0; while (read_indexs[i] != 0x00) { - test_byte = reg_r_1(gspca_dev, read_indexs[i]); - PDEBUG(D_CONF, "Reg 0x%02x => 0x%02x", read_indexs[i], + test_byte = reg_r(gspca_dev, read_indexs[i]); + PDEBUG(D_STREAM, "Reg 0x%02x = 0x%02x", read_indexs[i], test_byte); i++; } - reg_w(gspca_dev, 0x01, 0x0000, n3, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, n4, 0x46); - reg_r_1(gspca_dev, 0x0080); - reg_w(gspca_dev, 0x00, 0x2c80, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset2, 0x14); - reg_w(gspca_dev, 0x01, 0x0000, nset3, 0x12); - reg_w(gspca_dev, 0x01, 0x0000, nset4, 0x12); - reg_w(gspca_dev, 0x00, 0x3880, NULL, 0); - reg_w(gspca_dev, 0x00, 0x3880, NULL, 0); - reg_w(gspca_dev, 0x00, 0x338e, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset5, 0x04); - reg_w(gspca_dev, 0x00, 0x00a9, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset6, 0x22); - reg_w(gspca_dev, 0x00, 0x86bb, NULL, 0); - reg_w(gspca_dev, 0x00, 0x4aa6, NULL, 0); - - reg_w(gspca_dev, 0x01, 0x0000, missing, 0x08); - - reg_w(gspca_dev, 0x00, 0x2087, NULL, 0); - reg_w(gspca_dev, 0x00, 0x2088, NULL, 0); - reg_w(gspca_dev, 0x00, 0x2089, NULL, 0); - - reg_w(gspca_dev, 0x01, 0x0000, nset7, 0x04); - reg_w(gspca_dev, 0x01, 0x0000, nset10, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, nset8, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, nset9, 0x04); - - reg_w(gspca_dev, 0x00, 0x2880, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset2, 0x14); - reg_w(gspca_dev, 0x01, 0x0000, nset3, 0x12); - reg_w(gspca_dev, 0x01, 0x0000, nset4, 0x12); + reg_w_buf(gspca_dev, n3, sizeof n3); + reg_w_buf(gspca_dev, n4, sizeof n4); + reg_r(gspca_dev, 0x0080); + reg_w(gspca_dev, 0x2c80); - return 0; -} + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data1, + sizeof sensor_data[sd->sensor].data1); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data3, + sizeof sensor_data[sd->sensor].data3); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data2, + sizeof sensor_data[sd->sensor].data2); -/* this function is called at probe and resume time */ -static int sd_init(struct gspca_dev *gspca_dev) -{ - init_default_parameters(gspca_dev); - return 0; -} + reg_w(gspca_dev, 0x3880); + reg_w(gspca_dev, 0x3880); + reg_w(gspca_dev, 0x338e); -static void setbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - unsigned int brightness; - __u8 set6[4] = { 0x8f, 0x26, 0xc3, 0x80 }; - brightness = sd->brightness; + setbrightness(gspca_dev); + setcontrast(gspca_dev); + setgamma(gspca_dev); + setcolors(gspca_dev); + setsharpness(gspca_dev); + setwhitebalance(gspca_dev); - if (brightness < 7) { - set6[3] = 0x70 - (brightness * 0xa); - } else { - set6[1] = 0x24; - set6[3] = 0x00 + ((brightness - 7) * 0xa); - } + reg_w(gspca_dev, 0x2087); /* tied to white balance? */ + reg_w(gspca_dev, 0x2088); + reg_w(gspca_dev, 0x2089); - reg_w(gspca_dev, 0x01, 0x0000, set6, 4); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data4, + sizeof sensor_data[sd->sensor].data4); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data5, + sizeof sensor_data[sd->sensor].data5); + reg_w_buf(gspca_dev, nset8, sizeof nset8); + reg_w_buf(gspca_dev, nset9, sizeof nset9); + + reg_w(gspca_dev, 0x2880); + + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data1, + sizeof sensor_data[sd->sensor].data1); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data3, + sizeof sensor_data[sd->sensor].data3); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data2, + sizeof sensor_data[sd->sensor].data2); + + return 0; } static void setflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 flipcmd[8] = - { 0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09 }; + {0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09}; - if (sd->mirror == 1) + if (sd->mirror) flipcmd[3] = 0x01; - reg_w(gspca_dev, 0x01, 0x0000, flipcmd, 8); + reg_w_buf(gspca_dev, flipcmd, sizeof flipcmd); } static void seteffect(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - reg_w(gspca_dev, 0x01, 0x0000, effects_table[sd->effect], 0x06); + reg_w_buf(gspca_dev, effects_table[sd->effect], + sizeof effects_table[0]); if (sd->effect == 1 || sd->effect == 5) { PDEBUG(D_CONF, "This effect have been disabled for webcam \"safety\""); @@ -601,22 +770,9 @@ static void seteffect(struct gspca_dev *gspca_dev) } if (sd->effect == 1 || sd->effect == 4) - reg_w(gspca_dev, 0x00, 0x4aa6, NULL, 0); + reg_w(gspca_dev, 0x4aa6); else - reg_w(gspca_dev, 0x00, 0xfaa6, NULL, 0); -} - -static void setwhitebalance(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - __u8 white_balance[8] = - { 0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38 }; - - if (sd->whitebalance == 1) - white_balance[7] = 0x3c; - - reg_w(gspca_dev, 0x01, 0x0000, white_balance, 8); + reg_w(gspca_dev, 0xfaa6); } static void setlightfreq(struct gspca_dev *gspca_dev) @@ -627,44 +783,143 @@ static void setlightfreq(struct gspca_dev *gspca_dev) if (sd->freq == 2) /* 60hz */ freq[1] = 0x00; - reg_w(gspca_dev, 0x1, 0x0000, freq, 0x4); + reg_w_buf(gspca_dev, freq, sizeof freq); } -static void setcontrast(struct gspca_dev *gspca_dev) +/* Is this really needed? + * i added some module parameters for test with some users */ +static void poll_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - unsigned int contrast = sd->contrast; - __u16 reg_to_write = 0x00; - - if (contrast < 7) - reg_to_write = 0x8ea9 - (0x200 * contrast); - else - reg_to_write = (0x00a9 + ((contrast - 7) * 0x200)); - - reg_w(gspca_dev, 0x00, reg_to_write, NULL, 0); + static const __u8 poll1[] = + {0x67, 0x05, 0x68, 0x81, 0x69, 0x80, 0x6a, 0x82, + 0x6b, 0x68, 0x6c, 0x69, 0x72, 0xd9, 0x73, 0x34, + 0x74, 0x32, 0x75, 0x92, 0x76, 0x00, 0x09, 0x01, + 0x60, 0x14}; + static const __u8 poll2[] = + {0x67, 0x02, 0x68, 0x71, 0x69, 0x72, 0x72, 0xa9, + 0x73, 0x02, 0x73, 0x02, 0x60, 0x14}; + static const __u8 poll3[] = + {0x87, 0x3f, 0x88, 0x20, 0x89, 0x2d}; + static const __u8 poll4[] = + {0xa6, 0x0a, 0xea, 0xcf, 0xbe, 0x26, 0xb1, 0x5f, + 0xa1, 0xb1, 0xda, 0x6b, 0xdb, 0x98, 0xdf, 0x0c, + 0xc2, 0x80, 0xc3, 0x10}; + + if (sd->sensor != SENSOR_TAS5130A) { + PDEBUG(D_STREAM, "[Sensor requires polling]"); + reg_w_buf(gspca_dev, poll1, sizeof poll1); + reg_w_buf(gspca_dev, poll2, sizeof poll2); + reg_w_buf(gspca_dev, poll3, sizeof poll3); + reg_w_buf(gspca_dev, poll4, sizeof poll4); + } } -static void setcolors(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u16 reg_to_write; + int i, mode; + __u8 t2[] = { 0x07, 0x00, 0x0d, 0x60, 0x0e, 0x80 }; + static const __u8 t3[] = + { 0xb3, 0x07, 0xb4, 0x00, 0xb5, 0x88, 0xb6, 0x02, 0xb7, 0x06, + 0xb8, 0x00, 0xb9, 0xe7, 0xba, 0x01 }; + + mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode]. priv; + switch (mode) { + case 1: /* 352x288 */ + t2[1] = 0x40; + break; + case 2: /* 320x240 */ + t2[1] = 0x10; + break; + case 3: /* 176x144 */ + t2[1] = 0x50; + break; + case 4: /* 160x120 */ + t2[1] = 0x20; + break; + default: /* 640x480 (0x00) */ + break; + } - reg_to_write = 0xc0bb + sd->colors * 0x100; - reg_w(gspca_dev, 0x00, reg_to_write, NULL, 0); + if (sd->sensor == SENSOR_TAS5130A) { + i = 0; + while (tas5130a_sensor_init[i][0] != 0) { + reg_w_buf(gspca_dev, tas5130a_sensor_init[i], + sizeof tas5130a_sensor_init[0]); + i++; + } + reg_w(gspca_dev, 0x3c80); + /* just in case and to keep sync with logs (for mine) */ + reg_w_buf(gspca_dev, tas5130a_sensor_init[3], + sizeof tas5130a_sensor_init[0]); + reg_w(gspca_dev, 0x3c80); + } else { + om6802_sensor_init(gspca_dev); + } + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data4, + sizeof sensor_data[sd->sensor].data4); + reg_r(gspca_dev, 0x0012); + reg_w_buf(gspca_dev, t2, sizeof t2); + reg_w_buf(gspca_dev, t3, sizeof t3); + reg_w(gspca_dev, 0x0013); + msleep(15); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, + sizeof sensor_data[sd->sensor].stream); + poll_sensor(gspca_dev); + + /* restart on each start, just in case, sometimes regs goes wrong + * when using controls from app */ + setbrightness(gspca_dev); + setcontrast(gspca_dev); + setcolors(gspca_dev); + return 0; } -static void setgamma(struct gspca_dev *gspca_dev) +static void sd_stopN(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, + sizeof sensor_data[sd->sensor].stream); + msleep(20); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, + sizeof sensor_data[sd->sensor].stream); + msleep(20); + reg_w(gspca_dev, 0x0309); } -static void setsharpness(struct gspca_dev *gspca_dev) +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ { - struct sd *sd = (struct sd *) gspca_dev; - __u16 reg_to_write; + static __u8 ffd9[] = { 0xff, 0xd9 }; - reg_to_write = 0x0aa6 + 0x1000 * sd->sharpness; + if (data[0] == 0x5a) { + /* Control Packet, after this came the header again, + * but extra bytes came in the packet before this, + * sometimes an EOF arrives, sometimes not... */ + return; + } + data += 2; + len -= 2; + if (data[0] == 0xff && data[1] == 0xd8) { + /* extra bytes....., could be processed too but would be + * a waste of time, right now leave the application and + * libjpeg do it for ourserlves.. */ + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, + ffd9, 2); + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); + return; + } - reg_w(gspca_dev, 0x00, reg_to_write, NULL, 0); + if (data[len - 2] == 0xff && data[len - 1] == 0xd9) { + /* Just in case, i have seen packets with the marker, + * other's do not include it... */ + len -= 2; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) @@ -788,6 +1043,7 @@ static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val) static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; + *val = sd->gamma; return 0; } @@ -835,9 +1091,9 @@ static int sd_setlowlight(struct gspca_dev *gspca_dev, __s32 val) sd->autogain = val; if (val != 0) - reg_w(gspca_dev, 0x00, 0xf48e, NULL, 0); + reg_w(gspca_dev, 0xf48e); else - reg_w(gspca_dev, 0x00, 0xb48e, NULL, 0); + reg_w(gspca_dev, 0xb48e); return 0; } @@ -849,99 +1105,6 @@ static int sd_getlowlight(struct gspca_dev *gspca_dev, __s32 *val) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) -{ - int mode; - - static const __u8 t1[] = { 0x66, 0x00, 0xa8, 0xe8 }; - __u8 t2[] = { 0x07, 0x00, 0x0d, 0x60, 0x0e, 0x80 }; - static const __u8 t3[] = - { 0xb3, 0x07, 0xb4, 0x00, 0xb5, 0x88, 0xb6, 0x02, 0xb7, 0x06, - 0xb8, 0x00, 0xb9, 0xe7, 0xba, 0x01 }; - static const __u8 t4[] = { 0x0b, 0x04, 0x0a, 0x40 }; - - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode]. priv; - switch (mode) { - case 1: /* 352x288 */ - t2[1] = 0x40; - break; - case 2: /* 320x240 */ - t2[1] = 0x10; - break; - case 3: /* 176x144 */ - t2[1] = 0x50; - break; - case 4: /* 160x120 */ - t2[1] = 0x20; - break; - default: /* 640x480 (0x00) */ - break; - } - - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[0], 0x8); - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[1], 0x8); - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[2], 0x8); - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[3], 0x8); - reg_w(gspca_dev, 0x00, 0x3c80, NULL, 0); - /* just in case and to keep sync with logs (for mine) */ - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[3], 0x8); - reg_w(gspca_dev, 0x00, 0x3c80, NULL, 0); - /* just in case and to keep sync with logs (for mine) */ - reg_w(gspca_dev, 0x01, 0x0000, t1, 4); - reg_w(gspca_dev, 0x01, 0x0000, t2, 6); - reg_r_1(gspca_dev, 0x0012); - reg_w(gspca_dev, 0x01, 0x0000, t3, 0x10); - reg_w(gspca_dev, 0x00, 0x0013, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, t4, 0x4); - /* restart on each start, just in case, sometimes regs goes wrong - * when using controls from app */ - setbrightness(gspca_dev); - setcontrast(gspca_dev); - setcolors(gspca_dev); -} - -static void sd_pkt_scan(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ - int len) /* iso packet length */ -{ - int sof = 0; - static __u8 ffd9[] = { 0xff, 0xd9 }; - - if (data[0] == 0x5a) { - /* Control Packet, after this came the header again, - * but extra bytes came in the packet before this, - * sometimes an EOF arrives, sometimes not... */ - return; - } - - if (data[len - 1] == 0xff && data[len] == 0xd9) { - /* Just in case, i have seen packets with the marker, - * other's do not include it... */ - data += 2; - len -= 4; - } else if (data[2] == 0xff && data[3] == 0xd8) { - sof = 1; - data += 2; - len -= 2; - } else { - data += 2; - len -= 2; - } - - if (sof) { - /* extra bytes....., could be processed too but would be - * a waste of time, right now leave the application and - * libjpeg do it for ourserlves.. */ - frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, - ffd9, 2); - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); - return; - } - - gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); -} - static int sd_querymenu(struct gspca_dev *gspca_dev, struct v4l2_querymenu *menu) { @@ -975,6 +1138,7 @@ static const struct sd_desc sd_desc = { .config = sd_config, .init = sd_init, .start = sd_start, + .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, }; diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index 084af05302a..968a5911704 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -390,7 +390,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32); reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00); @@ -443,6 +443,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /************************************************/ tv_8532_PollReg(gspca_dev); reg_w_1(gspca_dev, TV8532_UDP_UPDATE, 0x00); /* 0x31 */ + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index bd4c226c9a0..be46d923254 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -80,7 +80,6 @@ static struct ctrl sd_ctrls[] = { .step = 1, #define FREQ_DEF 1 .default_value = FREQ_DEF, - .default_value = 1, }, .set = sd_setfreq, .get = sd_getfreq, @@ -1502,7 +1501,7 @@ static void setlightfreq(struct gspca_dev *gspca_dev) usb_exchange(gspca_dev, ov7660_freq_tb[sd->lightfreq]); } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; const __u8 *GammaT = NULL; @@ -1586,7 +1585,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; default: PDEBUG(D_PROBE, "Damned !! no sensor found Bye"); - return; + return -EMEDIUMTYPE; } if (GammaT && MatrixT) { put_tab_to_reg(gspca_dev, GammaT, 17, 0xb84a); @@ -1622,6 +1621,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setautogain(gspca_dev); setlightfreq(gspca_dev); } + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d61ef727e0c..d0a4451dc46 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7178,7 +7178,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; @@ -7331,6 +7331,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(dev, 0x02, 0x0008); break; } + return 0; } static void sd_stop0(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index a30254bed31..efe849981ab 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -12,6 +12,10 @@ * Markus Rechberger <mrechberger@gmail.com> * modified for DViCO Fusion HDTV 5 RT GOLD by * Chaogui Zhang <czhang1974@gmail.com> + * modified for MSI TV@nywhere Plus by + * Henry Wong <henry@stuffedcow.net> + * Mark Schultz <n9xmj@yahoo.com> + * Brian Rogers <brian_rogers@comcast.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -65,7 +69,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, int size, int offset) { unsigned char buf[6]; - int start, range, toggle, dev, code; + int start, range, toggle, dev, code, ircode; /* poll IR chip */ if (size != i2c_master_recv(&ir->c,buf,size)) @@ -85,6 +89,24 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, if (!start) /* no key pressed */ return 0; + /* + * Hauppauge remotes (black/silver) always use + * specific device ids. If we do not filter the + * device ids then messages destined for devices + * such as TVs (id=0) will get through causing + * mis-fired events. + * + * We also filter out invalid key presses which + * produce annoying debug log entries. + */ + ircode= (start << 12) | (toggle << 11) | (dev << 6) | code; + if ((ircode & 0x1fff)==0x1fff) + /* invalid key press */ + return 0; + + if (dev!=0x1e && dev!=0x1f) + /* not a hauppauge remote */ + return 0; if (!range) code += 64; @@ -94,7 +116,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, /* return key */ *ir_key = code; - *ir_raw = (start << 12) | (toggle << 11) | (dev << 6) | code; + *ir_raw = ircode; return 1; } @@ -224,9 +246,15 @@ static void ir_timer(unsigned long data) static void ir_work(struct work_struct *work) { struct IR_i2c *ir = container_of(work, struct IR_i2c, work); + int polling_interval = 100; + + /* MSI TV@nywhere Plus requires more frequent polling + otherwise it will miss some keypresses */ + if (ir->c.adapter->id == I2C_HW_SAA7134 && ir->c.addr == 0x30) + polling_interval = 50; ir_key_poll(ir); - mod_timer(&ir->timer, jiffies + msecs_to_jiffies(100)); + mod_timer(&ir->timer, jiffies + msecs_to_jiffies(polling_interval)); } /* ----------------------------------------------------------------------- */ @@ -465,9 +493,37 @@ static int ir_probe(struct i2c_adapter *adap) (1 == rc) ? "yes" : "no"); if (1 == rc) { ir_attach(adap, probe[i], 0, 0); - break; + return 0; } } + + /* Special case for MSI TV@nywhere Plus remote */ + if (adap->id == I2C_HW_SAA7134) { + u8 temp; + + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... */ + + msg.addr = 0x50; + rc = i2c_transfer(adap, &msg, 1); + dprintk(1, "probe 0x%02x @ %s: %s\n", + msg.addr, adap->name, + (1 == rc) ? "yes" : "no"); + + /* Now do the probe. The controller does not respond + to 0-byte reads, so we use a 1-byte read instead. */ + msg.addr = 0x30; + msg.len = 1; + msg.buf = &temp; + rc = i2c_transfer(adap, &msg, 1); + dprintk(1, "probe 0x%02x @ %s: %s\n", + msg.addr, adap->name, + (1 == rc) ? "yes" : "no"); + if (1 == rc) + ir_attach(adap, msg.addr, 0, 0); + } + return 0; } diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h index 381af1bceef..0b8fe85fb69 100644 --- a/drivers/media/video/ivtv/ivtv-cards.h +++ b/drivers/media/video/ivtv/ivtv-cards.h @@ -154,7 +154,7 @@ #define IVTV_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | V4L2_CAP_VBI_CAPTURE | \ V4L2_CAP_SLICED_VBI_CAPTURE) -#define IVTV_CAP_DECODER (V4L2_CAP_VBI_OUTPUT | V4L2_CAP_VIDEO_OUTPUT | \ +#define IVTV_CAP_DECODER (V4L2_CAP_VIDEO_OUTPUT | \ V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_OVERLAY) struct ivtv_card_video_input { diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 4afc7ea07e8..aeaa13f6cb3 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -61,14 +61,14 @@ #include "tuner-xc2028.h" /* var to keep track of the number of array elements in use */ -int ivtv_cards_active = 0; +int ivtv_cards_active; /* If you have already X v4l cards, then set this to X. This way the device numbers stay matched. Example: you have a WinTV card without radio and a PVR-350 with. Normally this would give a video1 device together with a radio0 device for the PVR. By setting this to 1 you ensure that radio0 is now also radio1. */ -int ivtv_first_minor = 0; +int ivtv_first_minor; /* Master variable for all ivtv info */ struct ivtv *ivtv_cards[IVTV_MAX_CARDS]; @@ -251,7 +251,7 @@ MODULE_PARM_DESC(newi2c, "\t\t\t-1 is autodetect, 0 is off, 1 is on\n" "\t\t\tDefault is autodetect"); -MODULE_PARM_DESC(ivtv_first_minor, "Set minor assigned to first card"); +MODULE_PARM_DESC(ivtv_first_minor, "Set kernel number assigned to first card"); MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); MODULE_DESCRIPTION("CX23415/CX23416 driver"); @@ -655,9 +655,9 @@ done: if (itv->card == NULL) { itv->card = ivtv_get_card(IVTV_CARD_PVR_150); - IVTV_ERR("Unknown card: vendor/device: %04x/%04x\n", + IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n", itv->dev->vendor, itv->dev->device); - IVTV_ERR(" subsystem vendor/device: %04x/%04x\n", + IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n", itv->dev->subsystem_vendor, itv->dev->subsystem_device); IVTV_ERR(" %s based\n", chipname); IVTV_ERR("Defaulting to %s card\n", itv->card->name); @@ -720,7 +720,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) itv->speed = 1000; /* VBI */ - itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced; /* Init the sg table for osd/yuv output */ diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 2ceb5227637..bc29436e8a3 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -49,7 +49,6 @@ #include <linux/i2c-algo-bit.h> #include <linux/list.h> #include <linux/unistd.h> -#include <linux/byteorder/swab.h> #include <linux/pagemap.h> #include <linux/scatterlist.h> #include <linux/workqueue.h> @@ -507,6 +506,8 @@ struct yuv_playback_info struct v4l2_rect main_rect; u32 v4l2_src_w; u32 v4l2_src_h; + + u8 running; /* Have any frames been displayed */ }; #define IVTV_VBI_FRAMES 32 @@ -751,6 +752,12 @@ void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv); /* First-open initialization: load firmware, init cx25840, etc. */ int ivtv_init_on_first_open(struct ivtv *itv); +/* Test if the current VBI mode is raw (1) or sliced (0) */ +static inline int ivtv_raw_vbi(const struct ivtv *itv) +{ + return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE; +} + /* This is a PCI post thing, where if the pci register is not read, then the write doesn't always take effect right away. By reading back the register any pending PCI writes will be performed (in order), and so diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 7ec5c99f9ad..1c404e454a3 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -39,7 +39,7 @@ associated VBI streams are also automatically claimed. Possible error returns: -EBUSY if someone else has claimed the stream or 0 on success. */ -int ivtv_claim_stream(struct ivtv_open_id *id, int type) +static int ivtv_claim_stream(struct ivtv_open_id *id, int type) { struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[type]; @@ -78,7 +78,7 @@ int ivtv_claim_stream(struct ivtv_open_id *id, int type) if (type == IVTV_DEC_STREAM_TYPE_MPG) { vbi_type = IVTV_DEC_STREAM_TYPE_VBI; } else if (type == IVTV_ENC_STREAM_TYPE_MPG && - itv->vbi.insert_mpeg && itv->vbi.sliced_in->service_set) { + itv->vbi.insert_mpeg && !ivtv_raw_vbi(itv)) { vbi_type = IVTV_ENC_STREAM_TYPE_VBI; } else { return 0; @@ -305,7 +305,7 @@ static size_t ivtv_copy_buf_to_user(struct ivtv_stream *s, struct ivtv_buffer *b if (len > ucount) len = ucount; if (itv->vbi.insert_mpeg && s->type == IVTV_ENC_STREAM_TYPE_MPG && - itv->vbi.sliced_in->service_set && buf != &itv->vbi.sliced_mpeg_buf) { + !ivtv_raw_vbi(itv) && buf != &itv->vbi.sliced_mpeg_buf) { const char *start = buf->buf + buf->readpos; const char *p = start + 1; const u8 *q; @@ -372,7 +372,7 @@ static ssize_t ivtv_read(struct ivtv_stream *s, char __user *ubuf, size_t tot_co /* Each VBI buffer is one frame, the v4l2 API says that for VBI the frames should arrive one-by-one, so make sure we never output more than one VBI frame at a time */ if (s->type == IVTV_DEC_STREAM_TYPE_VBI || - (s->type == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set)) + (s->type == IVTV_ENC_STREAM_TYPE_VBI && !ivtv_raw_vbi(itv))) single_frame = 1; for (;;) { @@ -600,13 +600,14 @@ retry: since we may get here before the stream has been fully set-up */ if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { while (count >= itv->dma_data_req_size) { - if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) { - bytes_written += itv->dma_data_req_size; - user_buf += itv->dma_data_req_size; - count -= itv->dma_data_req_size; - } else { - break; - } + rc = ivtv_yuv_udma_stream_frame(itv, (void __user *)user_buf); + + if (rc < 0) + return rc; + + bytes_written += itv->dma_data_req_size; + user_buf += itv->dma_data_req_size; + count -= itv->dma_data_req_size; } if (count == 0) { IVTV_DEBUG_HI_FILE("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused); diff --git a/drivers/media/video/ivtv/ivtv-fileops.h b/drivers/media/video/ivtv/ivtv-fileops.h index 2c8d5186c9c..df81e790147 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.h +++ b/drivers/media/video/ivtv/ivtv-fileops.h @@ -38,11 +38,6 @@ void ivtv_unmute(struct ivtv *itv); /* Utilities */ -/* Try to claim a stream for the filehandle. Return 0 on success, - -EBUSY if stream already claimed. Once a stream is claimed, it - remains claimed until the associated filehandle is closed. */ -int ivtv_claim_stream(struct ivtv_open_id *id, int type); - /* Release a previously claimed stream. */ void ivtv_release_stream(struct ivtv_stream *s); diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index bc22905ea20..74a44844cca 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -124,7 +124,7 @@ void ivtv_reset_ir_gpio(struct ivtv *itv) } /* Xceive tuner reset function */ -int ivtv_reset_tuner_gpio(void *dev, int cmd, int value) +int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value) { struct i2c_algo_bit_data *algo = dev; struct ivtv *itv = algo->data; diff --git a/drivers/media/video/ivtv/ivtv-gpio.h b/drivers/media/video/ivtv/ivtv-gpio.h index 964a265d91a..48b6291613a 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.h +++ b/drivers/media/video/ivtv/ivtv-gpio.h @@ -24,7 +24,7 @@ /* GPIO stuff */ void ivtv_gpio_init(struct ivtv *itv); void ivtv_reset_ir_gpio(struct ivtv *itv); -int ivtv_reset_tuner_gpio(void *dev, int cmd, int value); +int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value); int ivtv_gpio(struct ivtv *itv, unsigned int command, void *arg); #endif diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index af154238fb9..24700c211d5 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -64,8 +64,6 @@ #include "ivtv-gpio.h" #include "ivtv-i2c.h" -#include <media/ir-kbd-i2c.h> - /* i2c implementation for cx23415/6 chip, ivtv project. * Author: Kevin Thayer (nufan_wfk at yahoo.com) */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 61030309d0a..208fb54842f 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -101,18 +101,15 @@ void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) } } -static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +static void check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) { int f, l; - u16 set = 0; for (f = 0; f < 2; f++) { for (l = 0; l < 24; l++) { fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); - set |= fmt->service_lines[f][l]; } } - return set != 0; } u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt) @@ -474,7 +471,7 @@ static int ivtv_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format int h = fmt->fmt.pix.height; w = min(w, 720); - w = max(w, 1); + w = max(w, 2); h = min(h, itv->is_50hz ? 576 : 480); h = max(h, 2); ivtv_g_fmt_vid_cap(file, fh, fmt); @@ -512,27 +509,34 @@ static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { struct ivtv_open_id *id = fh; - s32 w, h; - int field; - int ret; + s32 w = fmt->fmt.pix.width; + s32 h = fmt->fmt.pix.height; + int field = fmt->fmt.pix.field; + int ret = ivtv_g_fmt_vid_out(file, fh, fmt); - w = fmt->fmt.pix.width; - h = fmt->fmt.pix.height; - field = fmt->fmt.pix.field; - ret = ivtv_g_fmt_vid_out(file, fh, fmt); + w = min(w, 720); + w = max(w, 2); + /* Why can the height be 576 even when the output is NTSC? + + Internally the buffers of the PVR350 are always set to 720x576. The + decoded video frame will always be placed in the top left corner of + this buffer. For any video which is not 720x576, the buffer will + then be cropped to remove the unused right and lower areas, with + the remaining image being scaled by the hardware to fit the display + area. The video can be scaled both up and down, so a 720x480 video + can be displayed full-screen on PAL and a 720x576 video can be + displayed without cropping on NTSC. + + Note that the scaling only occurs on the video stream, the osd + resolution is locked to the broadcast standard and not scaled. + + Thanks to Ian Armstrong for this explanation. */ + h = min(h, 576); + h = max(h, 2); + if (id->type == IVTV_DEC_STREAM_TYPE_YUV) + fmt->fmt.pix.field = field; fmt->fmt.pix.width = w; fmt->fmt.pix.height = h; - if (!ret && id->type == IVTV_DEC_STREAM_TYPE_YUV) { - fmt->fmt.pix.field = field; - if (fmt->fmt.pix.width < 2) - fmt->fmt.pix.width = 2; - if (fmt->fmt.pix.width > 720) - fmt->fmt.pix.width = 720; - if (fmt->fmt.pix.height < 2) - fmt->fmt.pix.height = 2; - if (fmt->fmt.pix.height > 576) - fmt->fmt.pix.height = 576; - } return ret; } @@ -560,9 +564,9 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f struct ivtv_open_id *id = fh; struct ivtv *itv = id->itv; struct cx2341x_mpeg_params *p = &itv->params; + int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; - int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); if (ret) return ret; @@ -585,8 +589,11 @@ static int ivtv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f { struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + if (!ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) + return -EBUSY; itv->vbi.sliced_in->service_set = 0; - itv->video_dec_func(itv, VIDIOC_S_FMT, &itv->vbi.in); + itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; + itv->video_dec_func(itv, VIDIOC_S_FMT, fmt); return ivtv_g_fmt_vbi_cap(file, fh, fmt); } @@ -600,10 +607,10 @@ static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo if (ret || id->type == IVTV_DEC_STREAM_TYPE_VBI) return ret; - if (check_service_set(vbifmt, itv->is_50hz) == 0) - return -EINVAL; - if (atomic_read(&itv->capturing) > 0) + check_service_set(vbifmt, itv->is_50hz); + if (ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) return -EBUSY; + itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; itv->video_dec_func(itv, VIDIOC_S_FMT, fmt); memcpy(itv->vbi.sliced_in, vbifmt, sizeof(*itv->vbi.sliced_in)); return 0; @@ -651,8 +658,6 @@ static int ivtv_s_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *f itv->dma_data_req_size = 1080 * ((yi->v4l2_src_h + 31) & ~31); - /* Force update of yuv registers */ - yi->yuv_forced_update = 1; return 0; } @@ -761,7 +766,7 @@ static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vc strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); - strlcpy(vcap->bus_info, pci_name(itv->dev), sizeof(vcap->bus_info)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->dev)); vcap->version = IVTV_DRIVER_VERSION; /* version */ vcap->capabilities = itv->v4l2_cap; /* capabilities */ return 0; @@ -1370,6 +1375,9 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) if (itv->osd_global_alpha_state) fb->flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA; + if (yi->track_osd) + fb->flags |= V4L2_FBUF_FLAG_OVERLAY; + pixfmt &= 7; /* no local alpha for RGB565 or unknown formats */ @@ -1389,8 +1397,6 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) else fb->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA; } - if (yi->track_osd) - fb->flags |= V4L2_FBUF_FLAG_OVERLAY; return 0; } diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 34f3ab82785..f5d00ec5da7 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -753,7 +753,7 @@ static void ivtv_irq_vsync(struct ivtv *itv) */ unsigned int frame = read_reg(0x28c0) & 1; struct yuv_playback_info *yi = &itv->yuv_info; - int last_dma_frame = atomic_read(&itv->yuv_info.next_dma_frame); + int last_dma_frame = atomic_read(&yi->next_dma_frame); struct yuv_frame_info *f = &yi->new_frame_info[last_dma_frame]; if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n"); @@ -772,6 +772,7 @@ static void ivtv_irq_vsync(struct ivtv *itv) next_dma_frame = (next_dma_frame + 1) % IVTV_YUV_BUFFERS; atomic_set(&yi->next_dma_frame, next_dma_frame); yi->fields_lapsed = -1; + yi->running = 1; } } } @@ -804,9 +805,11 @@ static void ivtv_irq_vsync(struct ivtv *itv) } /* Check if we need to update the yuv registers */ - if ((yi->yuv_forced_update || f->update) && last_dma_frame != -1) { + if (yi->running && (yi->yuv_forced_update || f->update)) { if (!f->update) { - last_dma_frame = (u8)(last_dma_frame - 1) % IVTV_YUV_BUFFERS; + last_dma_frame = + (u8)(atomic_read(&yi->next_dma_frame) - + 1) % IVTV_YUV_BUFFERS; f = &yi->new_frame_info[last_dma_frame]; } diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 730e85d86fc..5bbf31e3930 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -75,7 +75,7 @@ static const struct file_operations ivtv_v4l2_dec_fops = { static struct { const char *name; int vfl_type; - int minor_offset; + int num_offset; int dma, pio; enum v4l2_buf_type buf_type; const struct file_operations *fops; @@ -171,8 +171,8 @@ static void ivtv_stream_init(struct ivtv *itv, int type) static int ivtv_prep_dev(struct ivtv *itv, int type) { struct ivtv_stream *s = &itv->streams[type]; - int minor_offset = ivtv_stream_info[type].minor_offset; - int minor; + int num_offset = ivtv_stream_info[type].num_offset; + int num = itv->num + ivtv_first_minor + num_offset; /* These four fields are always initialized. If v4l2dev == NULL, then this stream is not in use. In that case no other fields but these @@ -188,9 +188,6 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) if (type >= IVTV_DEC_STREAM_TYPE_MPG && !(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return 0; - /* card number + user defined offset + device offset */ - minor = itv->num + ivtv_first_minor + minor_offset; - /* User explicitly selected 0 buffers for these streams, so don't create them. */ if (ivtv_stream_info[type].dma != PCI_DMA_NONE && @@ -211,7 +208,7 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "ivtv%d %s", itv->num, s->name); - s->v4l2dev->minor = minor; + s->v4l2dev->num = num; s->v4l2dev->parent = &itv->dev->dev; s->v4l2dev->fops = ivtv_stream_info[type].fops; s->v4l2dev->release = video_device_release; @@ -250,39 +247,46 @@ static int ivtv_reg_dev(struct ivtv *itv, int type) { struct ivtv_stream *s = &itv->streams[type]; int vfl_type = ivtv_stream_info[type].vfl_type; - int minor; + int num; if (s->v4l2dev == NULL) return 0; - minor = s->v4l2dev->minor; + num = s->v4l2dev->num; + /* card number + user defined offset + device offset */ + if (type != IVTV_ENC_STREAM_TYPE_MPG) { + struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG]; + + if (s_mpg->v4l2dev) + num = s_mpg->v4l2dev->num + ivtv_stream_info[type].num_offset; + } + /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->v4l2dev, vfl_type, minor) && - video_register_device(s->v4l2dev, vfl_type, -1)) { - IVTV_ERR("Couldn't register v4l2 device for %s minor %d\n", - s->name, minor); + if (video_register_device(s->v4l2dev, vfl_type, num)) { + IVTV_ERR("Couldn't register v4l2 device for %s kernel number %d\n", + s->name, num); video_device_release(s->v4l2dev); s->v4l2dev = NULL; return -ENOMEM; } + num = s->v4l2dev->num; switch (vfl_type) { case VFL_TYPE_GRABBER: IVTV_INFO("Registered device video%d for %s (%d kB)\n", - s->v4l2dev->minor, s->name, itv->options.kilobytes[type]); + num, s->name, itv->options.kilobytes[type]); break; case VFL_TYPE_RADIO: IVTV_INFO("Registered device radio%d for %s\n", - s->v4l2dev->minor - MINOR_VFL_TYPE_RADIO_MIN, s->name); + num, s->name); break; case VFL_TYPE_VBI: if (itv->options.kilobytes[type]) IVTV_INFO("Registered device vbi%d for %s (%d kB)\n", - s->v4l2dev->minor - MINOR_VFL_TYPE_VBI_MIN, - s->name, itv->options.kilobytes[type]); + num, s->name, itv->options.kilobytes[type]); else IVTV_INFO("Registered device vbi%d for %s\n", - s->v4l2dev->minor - MINOR_VFL_TYPE_VBI_MIN, s->name); + num, s->name); break; } return 0; @@ -330,7 +334,7 @@ void ivtv_streams_cleanup(struct ivtv *itv, int unregister) static void ivtv_vbi_setup(struct ivtv *itv) { - int raw = itv->vbi.sliced_in->service_set == 0; + int raw = ivtv_raw_vbi(itv); u32 data[CX2341X_MBOX_MAX_DATA]; int lines; int i; diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c index 1ce9deb1104..4a37a7d2e69 100644 --- a/drivers/media/video/ivtv/ivtv-vbi.c +++ b/drivers/media/video/ivtv/ivtv-vbi.c @@ -334,7 +334,7 @@ void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf, int y; /* Raw VBI data */ - if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set == 0) { + if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && ivtv_raw_vbi(itv)) { u8 type; ivtv_buf_swap(buf); diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 3092ff1d00a..ee91107376c 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1147,6 +1147,7 @@ void ivtv_yuv_close(struct ivtv *itv) IVTV_DEBUG_YUV("ivtv_yuv_close\n"); ivtv_waitq(&itv->vsync_waitq); + yi->running = 0; atomic_set(&yi->next_dma_frame, -1); atomic_set(&yi->next_fill_frame, 0); diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index bdfda48e56b..8a4a150b12f 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -275,7 +275,6 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, int size_in_bytes) { DEFINE_WAIT(wait); - int ret = 0; int got_sig = 0; mutex_lock(&itv->udma.lock); @@ -316,7 +315,7 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, return -EINTR; } - return ret; + return 0; } static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source, @@ -368,11 +367,12 @@ static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source, } static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { unsigned long p = *ppos; void *dst; int err = 0; + int dma_err; unsigned long total_size; struct ivtv *itv = (struct ivtv *) info->par; unsigned long dma_offset = @@ -399,7 +399,6 @@ static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, if (count + p > total_size) { if (!err) err = -ENOSPC; - count = total_size - p; } @@ -408,39 +407,34 @@ static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, if (info->fbops->fb_sync) info->fbops->fb_sync(info); - if (!access_ok(VERIFY_READ, buf, count)) { - IVTVFB_WARN("Invalid userspace pointer 0x%08lx\n", - (unsigned long)buf); - err = -EFAULT; - } - - if (!err) { - /* If transfer size > threshold and both src/dst - addresses are aligned, use DMA */ - if (count >= 4096 && - ((unsigned long)buf & 3) == ((unsigned long)dst & 3)) { - /* Odd address = can't DMA. Align */ - if ((unsigned long)dst & 3) { - lead = 4 - ((unsigned long)dst & 3); - memcpy(dst, buf, lead); - buf += lead; - dst += lead; - } - /* DMA resolution is 32 bits */ - if ((count - lead) & 3) - tail = (count - lead) & 3; - /* DMA the data */ - dma_size = count - lead - tail; - err = ivtvfb_prep_dec_dma_to_device(itv, - p + lead + dma_offset, (void *)buf, dma_size); - dst += dma_size; - buf += dma_size; - /* Copy any leftover data */ - if (tail) - memcpy(dst, buf, tail); - } else { - memcpy(dst, buf, count); + /* If transfer size > threshold and both src/dst + addresses are aligned, use DMA */ + if (count >= 4096 && + ((unsigned long)buf & 3) == ((unsigned long)dst & 3)) { + /* Odd address = can't DMA. Align */ + if ((unsigned long)dst & 3) { + lead = 4 - ((unsigned long)dst & 3); + if (copy_from_user(dst, buf, lead)) + return -EFAULT; + buf += lead; + dst += lead; } + /* DMA resolution is 32 bits */ + if ((count - lead) & 3) + tail = (count - lead) & 3; + /* DMA the data */ + dma_size = count - lead - tail; + dma_err = ivtvfb_prep_dec_dma_to_device(itv, + p + lead + dma_offset, (void __user *)buf, dma_size); + if (dma_err) + return dma_err; + dst += dma_size; + buf += dma_size; + /* Copy any leftover data */ + if (tail && copy_from_user(dst, buf, tail)) + return -EFAULT; + } else if (copy_from_user(dst, buf, count)) { + return -EFAULT; } if (!err) @@ -463,9 +457,12 @@ static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long ar vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT | FB_VBLANK_HAVE_VSYNC; trace = read_reg(0x028c0) >> 16; - if (itv->is_50hz && trace > 312) trace -= 312; - else if (itv->is_60hz && trace > 262) trace -= 262; - if (trace == 1) vblank.flags |= FB_VBLANK_VSYNCING; + if (itv->is_50hz && trace > 312) + trace -= 312; + else if (itv->is_60hz && trace > 262) + trace -= 262; + if (trace == 1) + vblank.flags |= FB_VBLANK_VSYNCING; vblank.count = itv->last_vsync_field; vblank.vcount = trace; vblank.hcount = 0; @@ -476,7 +473,8 @@ static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long ar case FBIO_WAITFORVSYNC: prepare_to_wait(&itv->vsync_waitq, &wait, TASK_INTERRUPTIBLE); - if (!schedule_timeout(msecs_to_jiffies(50))) rc = -ETIMEDOUT; + if (!schedule_timeout(msecs_to_jiffies(50))) + rc = -ETIMEDOUT; finish_wait(&itv->vsync_waitq, &wait); return rc; diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index 2fd4b4a44aa..bae2d2beb70 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -33,27 +33,20 @@ * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard */ -#ifndef __KERNEL__ -#define __KERNEL__ -#endif - #include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/proc_fs.h> -#include "ks0127.h" - #include <linux/i2c.h> #include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> +#include "ks0127.h" -#define dprintk if (debug) printk - -/* i2c identification */ -#define I2C_KS0127_ADDON 0xD8 -#define I2C_KS0127_ONBOARD 0xDA +MODULE_DESCRIPTION("KS0127 video decoder driver"); +MODULE_AUTHOR("Ryan Drake"); +MODULE_LICENSE("GPL"); #define KS_TYPE_UNKNOWN 0 #define KS_TYPE_0122S 1 @@ -204,8 +197,6 @@ struct adjust { }; struct ks0127 { - struct i2c_client *client; - unsigned char addr; int format_width; int format_height; int cap_width; @@ -220,16 +211,18 @@ static int debug; /* insmod parameter */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug output"); -MODULE_LICENSE("GPL"); static u8 reg_defaults[64]; - - static void init_reg_defaults(void) { + static int initialized; u8 *table = reg_defaults; + if (initialized) + return; + initialized = 1; + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ table[KS_CMDC] = 0x00; /* Test options */ @@ -308,50 +301,53 @@ static void init_reg_defaults(void) * An explanation from kayork@mail.utexas.edu: * * During I2C reads, the KS0127 only samples for a stop condition - * during the place where the acknoledge bit should be. Any standard + * during the place where the acknowledge bit should be. Any standard * I2C implementation (correctly) throws in another clock transition * at the 9th bit, and the KS0127 will not recognize the stop condition * and will continue to clock out data. * * So we have to do the read ourself. Big deal. - workaround in i2c-algo-bit + * workaround in i2c-algo-bit */ -static u8 ks0127_read(struct ks0127 *ks, u8 reg) +static u8 ks0127_read(struct i2c_client *c, u8 reg) { - struct i2c_client *c = ks->client; char val = 0; struct i2c_msg msgs[] = { - {c->addr, 0, sizeof(reg), ®}, - {c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val}}; + { c->addr, 0, sizeof(reg), ® }, + { c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val } + }; int ret; ret = i2c_transfer(c->adapter, msgs, ARRAY_SIZE(msgs)); if (ret != ARRAY_SIZE(msgs)) - dprintk("ks0127_write error\n"); + v4l_dbg(1, debug, c, "read error\n"); return val; } -static void ks0127_write(struct ks0127 *ks, u8 reg, u8 val) +static void ks0127_write(struct i2c_client *c, u8 reg, u8 val) { - char msg[] = {reg, val}; + struct ks0127 *ks = i2c_get_clientdata(c); + char msg[] = { reg, val }; - if (i2c_master_send(ks->client, msg, sizeof(msg)) != sizeof(msg)) - dprintk("ks0127_write error\n"); + if (i2c_master_send(c, msg, sizeof(msg)) != sizeof(msg)) + v4l_dbg(1, debug, c, "write error\n"); ks->regs[reg] = val; } /* generic bit-twiddling */ -static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) +static void ks0127_and_or(struct i2c_client *client, u8 reg, u8 and_v, u8 or_v) { + struct ks0127 *ks = i2c_get_clientdata(client); + u8 val = ks->regs[reg]; val = (val & and_v) | or_v; - ks0127_write(ks, reg, val); + ks0127_write(client, reg, val); } @@ -359,73 +355,69 @@ static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) /**************************************************************************** * ks0127 private api ****************************************************************************/ -static void ks0127_reset(struct ks0127* ks) +static void ks0127_reset(struct i2c_client *c) { - int i; + struct ks0127 *ks = i2c_get_clientdata(c); u8 *table = reg_defaults; + int i; ks->ks_type = KS_TYPE_UNKNOWN; - dprintk("ks0127: reset\n"); + v4l_dbg(1, debug, c, "reset\n"); msleep(1); /* initialize all registers to known values */ /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ - for(i = 1; i < 33; i++) - ks0127_write(ks, i, table[i]); + for (i = 1; i < 33; i++) + ks0127_write(c, i, table[i]); - for(i = 35; i < 40; i++) - ks0127_write(ks, i, table[i]); + for (i = 35; i < 40; i++) + ks0127_write(c, i, table[i]); - for(i = 41; i < 56; i++) - ks0127_write(ks, i, table[i]); + for (i = 41; i < 56; i++) + ks0127_write(c, i, table[i]); - for(i = 58; i < 64; i++) - ks0127_write(ks, i, table[i]); + for (i = 58; i < 64; i++) + ks0127_write(c, i, table[i]); - if ((ks0127_read(ks, KS_STAT) & 0x80) == 0) { + if ((ks0127_read(c, KS_STAT) & 0x80) == 0) { ks->ks_type = KS_TYPE_0122S; - dprintk("ks0127: ks0122s Found\n"); + v4l_dbg(1, debug, c, "ks0122s found\n"); return; } - switch(ks0127_read(ks, KS_CMDE) & 0x0f) { - + switch (ks0127_read(c, KS_CMDE) & 0x0f) { case 0: ks->ks_type = KS_TYPE_0127; - dprintk("ks0127: ks0127 found\n"); + v4l_dbg(1, debug, c, "ks0127 found\n"); break; case 9: ks->ks_type = KS_TYPE_0127B; - dprintk("ks0127: ks0127B Revision A found\n"); + v4l_dbg(1, debug, c, "ks0127B Revision A found\n"); break; default: - dprintk("ks0127: unknown revision\n"); + v4l_dbg(1, debug, c, "unknown revision\n"); break; } } -static int ks0127_command(struct i2c_client *client, - unsigned int cmd, void *arg) +static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) { - struct ks0127 *ks = i2c_get_clientdata(client); - - int *iarg = (int*)arg; - + struct ks0127 *ks = i2c_get_clientdata(c); + int *iarg = (int *)arg; int status; if (!ks) return -ENODEV; switch (cmd) { - case DECODER_INIT: - dprintk("ks0127: command DECODER_INIT\n"); - ks0127_reset(ks); + v4l_dbg(1, debug, c, "DECODER_INIT\n"); + ks0127_reset(c); break; case DECODER_SET_INPUT: @@ -436,161 +428,160 @@ static int ks0127_command(struct i2c_client *client, case KS_INPUT_COMPOSITE_4: case KS_INPUT_COMPOSITE_5: case KS_INPUT_COMPOSITE_6: - dprintk("ks0127: command DECODER_SET_INPUT %d: " - "Composite\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT %d: Composite\n", *iarg); /* autodetect 50/60 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); /* VSE=0 */ - ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + ks0127_and_or(c, KS_CMDA, ~0x40, 0x00); /* set input line */ - ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + ks0127_and_or(c, KS_CMDB, 0xb0, *iarg); /* non-freerunning mode */ - ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + ks0127_and_or(c, KS_CMDC, 0x70, 0x0a); /* analog input */ - ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + ks0127_and_or(c, KS_CMDD, 0x03, 0x00); /* enable chroma demodulation */ - ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(c, KS_CTRACK, 0xcf, 0x00); /* chroma trap, HYBWR=1 */ - ks0127_and_or(ks, KS_LUMA, 0x00, + ks0127_and_or(c, KS_LUMA, 0x00, (reg_defaults[KS_LUMA])|0x0c); /* scaler fullbw, luma comb off */ - ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + ks0127_and_or(c, KS_VERTIA, 0x08, 0x81); /* manual chroma comb .25 .5 .25 */ - ks0127_and_or(ks, KS_VERTIC, 0x0f, 0x90); + ks0127_and_or(c, KS_VERTIC, 0x0f, 0x90); /* chroma path delay */ - ks0127_and_or(ks, KS_CHROMB, 0x0f, 0x90); + ks0127_and_or(c, KS_CHROMB, 0x0f, 0x90); - ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); - ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); - ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); - ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + ks0127_write(c, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(c, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(c, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(c, KS_UVOFFL, reg_defaults[KS_UVOFFL]); break; case KS_INPUT_SVIDEO_1: case KS_INPUT_SVIDEO_2: case KS_INPUT_SVIDEO_3: - dprintk("ks0127: command DECODER_SET_INPUT %d: " - "S-Video\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT %d: S-Video\n", *iarg); /* autodetect 50/60 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); /* VSE=0 */ - ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + ks0127_and_or(c, KS_CMDA, ~0x40, 0x00); /* set input line */ - ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + ks0127_and_or(c, KS_CMDB, 0xb0, *iarg); /* non-freerunning mode */ - ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + ks0127_and_or(c, KS_CMDC, 0x70, 0x0a); /* analog input */ - ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + ks0127_and_or(c, KS_CMDD, 0x03, 0x00); /* enable chroma demodulation */ - ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); - ks0127_and_or(ks, KS_LUMA, 0x00, + ks0127_and_or(c, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(c, KS_LUMA, 0x00, reg_defaults[KS_LUMA]); /* disable luma comb */ - ks0127_and_or(ks, KS_VERTIA, 0x08, + ks0127_and_or(c, KS_VERTIA, 0x08, (reg_defaults[KS_VERTIA]&0xf0)|0x01); - ks0127_and_or(ks, KS_VERTIC, 0x0f, + ks0127_and_or(c, KS_VERTIC, 0x0f, reg_defaults[KS_VERTIC]&0xf0); - ks0127_and_or(ks, KS_CHROMB, 0x0f, + ks0127_and_or(c, KS_CHROMB, 0x0f, reg_defaults[KS_CHROMB]&0xf0); - ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); - ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); - ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); - ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + ks0127_write(c, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(c, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(c, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(c, KS_UVOFFL, reg_defaults[KS_UVOFFL]); break; case KS_INPUT_YUV656: - dprintk("ks0127: command DECODER_SET_INPUT 15: " - "YUV656\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT 15: YUV656\n"); if (ks->norm == VIDEO_MODE_NTSC || ks->norm == KS_STD_PAL_M) /* force 60 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x03); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x03); else /* force 50 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x02); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x02); - ks0127_and_or(ks, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + ks0127_and_or(c, KS_CMDA, 0xff, 0x40); /* VSE=1 */ /* set input line and VALIGN */ - ks0127_and_or(ks, KS_CMDB, 0xb0, (*iarg | 0x40)); + ks0127_and_or(c, KS_CMDB, 0xb0, (*iarg | 0x40)); /* freerunning mode, */ /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ - ks0127_and_or(ks, KS_CMDC, 0x70, 0x87); + ks0127_and_or(c, KS_CMDC, 0x70, 0x87); /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ - ks0127_and_or(ks, KS_CMDD, 0x03, 0x08); + ks0127_and_or(c, KS_CMDD, 0x03, 0x08); /* disable chroma demodulation */ - ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x30); + ks0127_and_or(c, KS_CTRACK, 0xcf, 0x30); /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ - ks0127_and_or(ks, KS_LUMA, 0x00, 0x71); - ks0127_and_or(ks, KS_VERTIC, 0x0f, + ks0127_and_or(c, KS_LUMA, 0x00, 0x71); + ks0127_and_or(c, KS_VERTIC, 0x0f, reg_defaults[KS_VERTIC]&0xf0); /* scaler fullbw, luma comb off */ - ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + ks0127_and_or(c, KS_VERTIA, 0x08, 0x81); - ks0127_and_or(ks, KS_CHROMB, 0x0f, + ks0127_and_or(c, KS_CHROMB, 0x0f, reg_defaults[KS_CHROMB]&0xf0); - ks0127_and_or(ks, KS_CON, 0x00, 0x00); - ks0127_and_or(ks, KS_BRT, 0x00, 32); /* spec: 34 */ + ks0127_and_or(c, KS_CON, 0x00, 0x00); + ks0127_and_or(c, KS_BRT, 0x00, 32); /* spec: 34 */ /* spec: 229 (e5) */ - ks0127_and_or(ks, KS_SAT, 0x00, 0xe8); - ks0127_and_or(ks, KS_HUE, 0x00, 0); + ks0127_and_or(c, KS_SAT, 0x00, 0xe8); + ks0127_and_or(c, KS_HUE, 0x00, 0); - ks0127_and_or(ks, KS_UGAIN, 0x00, 238); - ks0127_and_or(ks, KS_VGAIN, 0x00, 0x00); + ks0127_and_or(c, KS_UGAIN, 0x00, 238); + ks0127_and_or(c, KS_VGAIN, 0x00, 0x00); /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ - ks0127_and_or(ks, KS_UVOFFH, 0x00, 0x4f); - ks0127_and_or(ks, KS_UVOFFL, 0x00, 0x00); + ks0127_and_or(c, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(c, KS_UVOFFL, 0x00, 0x00); break; default: - dprintk("ks0127: command DECODER_SET_INPUT: " - "Unknown input %d\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT: Unknown input %d\n", *iarg); break; } /* hack: CDMLPF sometimes spontaneously switches on; */ /* force back off */ - ks0127_write(ks, KS_DEMOD, reg_defaults[KS_DEMOD]); + ks0127_write(c, KS_DEMOD, reg_defaults[KS_DEMOD]); break; case DECODER_SET_OUTPUT: switch(*iarg) { case KS_OUTPUT_YUV656E: - dprintk("ks0127: command DECODER_SET_OUTPUT: " - "OUTPUT_YUV656E (Missing)\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_OUTPUT: OUTPUT_YUV656E (Missing)\n"); return -EINVAL; - break; case KS_OUTPUT_EXV: - dprintk("ks0127: command DECODER_SET_OUTPUT: " - "OUTPUT_EXV\n"); - ks0127_and_or(ks, KS_OFMTA, 0xf0, 0x09); + v4l_dbg(1, debug, c, + "DECODER_SET_OUTPUT: OUTPUT_EXV\n"); + ks0127_and_or(c, KS_OFMTA, 0xf0, 0x09); break; } break; - case DECODER_SET_NORM: //sam This block mixes old and new norm names... + case DECODER_SET_NORM: /* sam This block mixes old and new norm names... */ /* Set to automatic SECAM/Fsc mode */ - ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x00); ks->norm = *iarg; - switch(*iarg) - { + switch (*iarg) { /* this is untested !! */ /* It just detects PAL_N/NTSC_M (no special frequencies) */ /* And you have to set the standard a second time afterwards */ case VIDEO_MODE_AUTO: - dprintk("ks0127: command DECODER_SET_NORM: AUTO\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: AUTO\n"); /* The chip determines the format */ /* based on the current field rate */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); /* This is wrong for PAL ! As I said, */ /* you need to set the standard once again !! */ ks->format_height = 240; @@ -598,84 +589,86 @@ static int ks0127_command(struct i2c_client *client, break; case VIDEO_MODE_NTSC: - dprintk("ks0127: command DECODER_SET_NORM: NTSC_M\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: NTSC_M\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); ks->format_height = 240; ks->format_width = 704; break; case KS_STD_NTSC_N: - dprintk("ks0127: command KS0127_SET_STANDARD: " - "NTSC_N (fixme)\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + v4l_dbg(1, debug, c, + "KS0127_SET_NORM: NTSC_N (fixme)\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x40); ks->format_height = 240; ks->format_width = 704; break; case VIDEO_MODE_PAL: - dprintk("ks0127: command DECODER_SET_NORM: PAL_N\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: PAL_N\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); ks->format_height = 290; ks->format_width = 704; break; case KS_STD_PAL_M: - dprintk("ks0127: command KS0127_SET_STANDARD: " - "PAL_M (fixme)\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + v4l_dbg(1, debug, c, + "KS0127_SET_NORM: PAL_M (fixme)\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x40); ks->format_height = 290; ks->format_width = 704; break; case VIDEO_MODE_SECAM: - dprintk("ks0127: command KS0127_SET_STANDARD: " - "SECAM\n"); + v4l_dbg(1, debug, c, + "KS0127_SET_NORM: SECAM\n"); ks->format_height = 290; ks->format_width = 704; /* set to secam autodetection */ - ks0127_and_or(ks, KS_CHROMA, 0xdf, 0x20); - ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + ks0127_and_or(c, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x00); schedule_timeout_interruptible(HZ/10+1); /* did it autodetect? */ - if (ks0127_read(ks, KS_DEMOD) & 0x40) + if (ks0127_read(c, KS_DEMOD) & 0x40) break; /* force to secam mode */ - ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x0f); + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x0f); break; default: - dprintk("ks0127: command DECODER_SET_NORM: " - "Unknown norm %d\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: Unknown norm %d\n", *iarg); break; } break; case DECODER_SET_PICTURE: - dprintk("ks0127: command DECODER_SET_PICTURE " - "not yet supported (fixme)\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_PICTURE: not yet supported\n"); return -EINVAL; - //sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE - //sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE - //sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? - //sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE - //sam todo: KS0127_SET_AGC_MODE: - //sam todo: KS0127_SET_AGC: - //sam todo: KS0127_SET_CHROMA_MODE: - //sam todo: KS0127_SET_PIXCLK_MODE: - //sam todo: KS0127_SET_GAMMA_MODE: - //sam todo: KS0127_SET_UGAIN: - //sam todo: KS0127_SET_VGAIN: - //sam todo: KS0127_SET_INVALY: - //sam todo: KS0127_SET_INVALU: - //sam todo: KS0127_SET_INVALV: - //sam todo: KS0127_SET_UNUSEY: - //sam todo: KS0127_SET_UNUSEU: - //sam todo: KS0127_SET_UNUSEV: - //sam todo: KS0127_SET_VSALIGN_MODE: + /* sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE */ + /* sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE */ + /* sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? */ + /* sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE */ + /* sam todo: KS0127_SET_AGC_MODE: */ + /* sam todo: KS0127_SET_AGC: */ + /* sam todo: KS0127_SET_CHROMA_MODE: */ + /* sam todo: KS0127_SET_PIXCLK_MODE: */ + /* sam todo: KS0127_SET_GAMMA_MODE: */ + /* sam todo: KS0127_SET_UGAIN: */ + /* sam todo: KS0127_SET_VGAIN: */ + /* sam todo: KS0127_SET_INVALY: */ + /* sam todo: KS0127_SET_INVALU: */ + /* sam todo: KS0127_SET_INVALV: */ + /* sam todo: KS0127_SET_UNUSEY: */ + /* sam todo: KS0127_SET_UNUSEU: */ + /* sam todo: KS0127_SET_UNUSEV: */ + /* sam todo: KS0127_SET_VSALIGN_MODE: */ case DECODER_ENABLE_OUTPUT: { @@ -684,34 +677,32 @@ static int ks0127_command(struct i2c_client *client, iarg = arg; enable = (*iarg != 0); if (enable) { - dprintk("ks0127: command " - "DECODER_ENABLE_OUTPUT on " - "(%d)\n", enable); + v4l_dbg(1, debug, c, + "DECODER_ENABLE_OUTPUT on\n"); /* All output pins on */ - ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); + ks0127_and_or(c, KS_OFMTA, 0xcf, 0x30); /* Obey the OEN pin */ - ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); + ks0127_and_or(c, KS_CDEM, 0x7f, 0x00); } else { - dprintk("ks0127: command " - "DECODER_ENABLE_OUTPUT off " - "(%d)\n", enable); + v4l_dbg(1, debug, c, + "DECODER_ENABLE_OUTPUT off\n"); /* Video output pins off */ - ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); + ks0127_and_or(c, KS_OFMTA, 0xcf, 0x00); /* Ignore the OEN pin */ - ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); + ks0127_and_or(c, KS_CDEM, 0x7f, 0x80); } - } break; + } - //sam todo: KS0127_SET_OUTPUT_MODE: - //sam todo: KS0127_SET_WIDTH: - //sam todo: KS0127_SET_HEIGHT: - //sam todo: KS0127_SET_HSCALE: + /* sam todo: KS0127_SET_OUTPUT_MODE: */ + /* sam todo: KS0127_SET_WIDTH: */ + /* sam todo: KS0127_SET_HEIGHT: */ + /* sam todo: KS0127_SET_HSCALE: */ case DECODER_GET_STATUS: - dprintk("ks0127: command DECODER_GET_STATUS\n"); + v4l_dbg(1, debug, c, "DECODER_GET_STATUS\n"); *iarg = 0; - status = ks0127_read(ks, KS_STAT); + status = ks0127_read(c, KS_STAT); if (!(status & 0x20)) /* NOVID not set */ *iarg = (*iarg | DECODER_STATUS_GOOD); if ((status & 0x01)) /* CLOCK set */ @@ -722,124 +713,81 @@ static int ks0127_command(struct i2c_client *client, *iarg = (*iarg | DECODER_STATUS_NTSC); break; - //Catch any unknown command + /* Catch any unknown command */ default: - dprintk("ks0127: command unknown: %04X\n", cmd); + v4l_dbg(1, debug, c, "unknown: 0x%08x\n", cmd); return -EINVAL; } return 0; } - - -static int ks0127_probe(struct i2c_adapter *adapter); -static int ks0127_detach(struct i2c_client *client); -static int ks0127_command(struct i2c_client *client, - unsigned int cmd, void *arg); - - - /* Addresses to scan */ -static unsigned short normal_i2c[] = {I2C_KS0127_ADDON>>1, - I2C_KS0127_ONBOARD>>1, I2C_CLIENT_END}; -static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; -static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; -static struct i2c_client_address_data addr_data = { - normal_i2c, - probe, - ignore, -}; +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA -static struct i2c_driver i2c_driver_ks0127 = { - .driver.name = "ks0127", - .id = I2C_DRIVERID_KS0127, - .attach_adapter = ks0127_probe, - .detach_client = ks0127_detach, - .command = ks0127_command +static unsigned short normal_i2c[] = { + I2C_KS0127_ADDON >> 1, + I2C_KS0127_ONBOARD >> 1, + I2C_CLIENT_END }; -static struct i2c_client ks0127_client_tmpl = -{ - .name = "(ks0127 unset)", - .addr = 0, - .adapter = NULL, - .driver = &i2c_driver_ks0127, -}; +I2C_CLIENT_INSMOD; -static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind) +static int ks0127_probe(struct i2c_client *c, const struct i2c_device_id *id) { struct ks0127 *ks; - struct i2c_client *client; - client = kzalloc(sizeof(*client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &ks0127_client_tmpl, sizeof(*client)); + v4l_info(c, "%s chip found @ 0x%x (%s)\n", + c->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board", + c->addr << 1, c->adapter->name); ks = kzalloc(sizeof(*ks), GFP_KERNEL); - if (ks == NULL) { - kfree(client); + if (ks == NULL) return -ENOMEM; - } - i2c_set_clientdata(client, ks); - client->adapter = adapter; - client->addr = addr; - sprintf(client->name, "ks0127-%02x", adapter->id); + i2c_set_clientdata(c, ks); - ks->client = client; - ks->addr = addr; ks->ks_type = KS_TYPE_UNKNOWN; /* power up */ - ks0127_write(ks, KS_CMDA, 0x2c); + init_reg_defaults(); + ks0127_write(c, KS_CMDA, 0x2c); mdelay(10); /* reset the device */ - ks0127_reset(ks); - printk(KERN_INFO "ks0127: attach: %s video decoder\n", - ks->addr==(I2C_KS0127_ADDON>>1) ? "addon" : "on-board"); - - i2c_attach_client(client); + ks0127_reset(c); return 0; } - -static int ks0127_probe(struct i2c_adapter *adapter) +static int ks0127_remove(struct i2c_client *c) { - if (adapter->id == I2C_HW_B_ZR36067) - return i2c_probe(adapter, &addr_data, ks0127_found_proc); - return 0; -} - -static int ks0127_detach(struct i2c_client *client) -{ - struct ks0127 *ks = i2c_get_clientdata(client); + struct ks0127 *ks = i2c_get_clientdata(c); - ks0127_write(ks, KS_OFMTA, 0x20); /*tristate*/ - ks0127_write(ks, KS_CMDA, 0x2c | 0x80); /* power down */ + ks0127_write(c, KS_OFMTA, 0x20); /* tristate */ + ks0127_write(c, KS_CMDA, 0x2c | 0x80); /* power down */ - i2c_detach_client(client); kfree(ks); - kfree(client); - - dprintk("ks0127: detach\n"); return 0; } - -static int __devinit ks0127_init_module(void) +static int ks0127_legacy_probe(struct i2c_adapter *adapter) { - init_reg_defaults(); - return i2c_add_driver(&i2c_driver_ks0127); + return adapter->id == I2C_HW_B_ZR36067; } -static void __devexit ks0127_cleanup_module(void) -{ - i2c_del_driver(&i2c_driver_ks0127); -} - - -module_init(ks0127_init_module); -module_exit(ks0127_cleanup_module); +static const struct i2c_device_id ks0127_id[] = { + { "ks0127", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ks0127_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "ks0127", + .driverid = I2C_DRIVERID_KS0127, + .command = ks0127_command, + .probe = ks0127_probe, + .remove = ks0127_remove, + .legacy_probe = ks0127_legacy_probe, + .id_table = ks0127_id, +}; diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index a9ef7802eb5..6418f4a78f2 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -843,17 +843,16 @@ again: static int meye_open(struct inode *inode, struct file *file) { - int i, err; + int i; - err = video_exclusive_open(inode, file); - if (err < 0) - return err; + if (test_and_set_bit(0, &meye.in_use)) + return -EBUSY; mchip_hic_stop(); if (mchip_dma_alloc()) { printk(KERN_ERR "meye: mchip framebuffer allocation failed\n"); - video_exclusive_release(inode, file); + clear_bit(0, &meye.in_use); return -ENOBUFS; } @@ -868,7 +867,7 @@ static int meye_release(struct inode *inode, struct file *file) { mchip_hic_stop(); mchip_dma_free(); - video_exclusive_release(inode, file); + clear_bit(0, &meye.in_use); return 0; } @@ -1774,6 +1773,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outnotdev; } + ret = -ENOMEM; meye.mchip_dev = pcidev; meye.video_dev = video_device_alloc(); if (!meye.video_dev) { @@ -1781,7 +1781,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outnotdev; } - ret = -ENOMEM; meye.grab_temp = vmalloc(MCHIP_NB_PAGES_MJPEG * PAGE_SIZE); if (!meye.grab_temp) { printk(KERN_ERR "meye: grab buffer allocation failed\n"); diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h index d535748df44..5f70a106ba2 100644 --- a/drivers/media/video/meye.h +++ b/drivers/media/video/meye.h @@ -311,6 +311,7 @@ struct meye { struct video_device *video_dev; /* video device parameters */ struct video_picture picture; /* video picture parameters */ struct meye_params params; /* additional parameters */ + unsigned long in_use; /* set to 1 if the device is in use */ #ifdef CONFIG_PM u8 pm_mchip_mode; /* old mchip mode */ #endif diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 554d2295484..0c524376b67 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -117,24 +117,51 @@ static int reg_clear(struct soc_camera_device *icd, const u8 reg, static int mt9m001_init(struct soc_camera_device *icd) { + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + struct soc_camera_link *icl = mt9m001->client->dev.platform_data; int ret; - /* Disable chip, synchronous option update */ dev_dbg(icd->vdev->parent, "%s\n", __func__); - ret = reg_write(icd, MT9M001_RESET, 1); - if (ret >= 0) - ret = reg_write(icd, MT9M001_RESET, 0); - if (ret >= 0) + if (icl->power) { + ret = icl->power(&mt9m001->client->dev, 1); + if (ret < 0) { + dev_err(icd->vdev->parent, + "Platform failed to power-on the camera.\n"); + return ret; + } + } + + /* The camera could have been already on, we reset it additionally */ + if (icl->reset) + ret = icl->reset(&mt9m001->client->dev); + else + ret = -ENODEV; + + if (ret < 0) { + /* Either no platform reset, or platform reset failed */ + ret = reg_write(icd, MT9M001_RESET, 1); + if (!ret) + ret = reg_write(icd, MT9M001_RESET, 0); + } + /* Disable chip, synchronous option update */ + if (!ret) ret = reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); - return ret >= 0 ? 0 : -EIO; + return ret; } static int mt9m001_release(struct soc_camera_device *icd) { + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + struct soc_camera_link *icl = mt9m001->client->dev.platform_data; + /* Disable the chip */ reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); + + if (icl->power) + icl->power(&mt9m001->client->dev, 0); + return 0; } @@ -267,24 +294,24 @@ static int mt9m001_set_fmt_cap(struct soc_camera_device *icd, /* Blanking and start values - default... */ ret = reg_write(icd, MT9M001_HORIZONTAL_BLANKING, hblank); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_VERTICAL_BLANKING, vblank); /* The caller provides a supported format, as verified per * call to icd->try_fmt_cap() */ - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_COLUMN_START, rect->left); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_ROW_START, rect->top); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_WINDOW_WIDTH, rect->width - 1); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_WINDOW_HEIGHT, rect->height + icd->y_skip_top - 1); - if (ret >= 0 && mt9m001->autoexposure) { + if (!ret && mt9m001->autoexposure) { ret = reg_write(icd, MT9M001_SHUTTER_WIDTH, rect->height + icd->y_skip_top + vblank); - if (ret >= 0) { + if (!ret) { const struct v4l2_queryctrl *qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); @@ -295,7 +322,7 @@ static int mt9m001_set_fmt_cap(struct soc_camera_device *icd, } } - return ret < 0 ? ret : 0; + return ret; } static int mt9m001_try_fmt_cap(struct soc_camera_device *icd, diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c new file mode 100644 index 00000000000..da0b2d553fd --- /dev/null +++ b/drivers/media/video/mt9m111.c @@ -0,0 +1,973 @@ +/* + * Driver for MT9M111 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> +#include <media/soc_camera.h> + +/* + * mt9m111 i2c address is 0x5d or 0x48 (depending on SAddr pin) + * The platform has to define i2c_board_info and call i2c_register_board_info() + */ + +/* mt9m111: Sensor register addresses */ +#define MT9M111_CHIP_VERSION 0x000 +#define MT9M111_ROW_START 0x001 +#define MT9M111_COLUMN_START 0x002 +#define MT9M111_WINDOW_HEIGHT 0x003 +#define MT9M111_WINDOW_WIDTH 0x004 +#define MT9M111_HORIZONTAL_BLANKING_B 0x005 +#define MT9M111_VERTICAL_BLANKING_B 0x006 +#define MT9M111_HORIZONTAL_BLANKING_A 0x007 +#define MT9M111_VERTICAL_BLANKING_A 0x008 +#define MT9M111_SHUTTER_WIDTH 0x009 +#define MT9M111_ROW_SPEED 0x00a +#define MT9M111_EXTRA_DELAY 0x00b +#define MT9M111_SHUTTER_DELAY 0x00c +#define MT9M111_RESET 0x00d +#define MT9M111_READ_MODE_B 0x020 +#define MT9M111_READ_MODE_A 0x021 +#define MT9M111_FLASH_CONTROL 0x023 +#define MT9M111_GREEN1_GAIN 0x02b +#define MT9M111_BLUE_GAIN 0x02c +#define MT9M111_RED_GAIN 0x02d +#define MT9M111_GREEN2_GAIN 0x02e +#define MT9M111_GLOBAL_GAIN 0x02f +#define MT9M111_CONTEXT_CONTROL 0x0c8 +#define MT9M111_PAGE_MAP 0x0f0 +#define MT9M111_BYTE_WISE_ADDR 0x0f1 + +#define MT9M111_RESET_SYNC_CHANGES (1 << 15) +#define MT9M111_RESET_RESTART_BAD_FRAME (1 << 9) +#define MT9M111_RESET_SHOW_BAD_FRAMES (1 << 8) +#define MT9M111_RESET_RESET_SOC (1 << 5) +#define MT9M111_RESET_OUTPUT_DISABLE (1 << 4) +#define MT9M111_RESET_CHIP_ENABLE (1 << 3) +#define MT9M111_RESET_ANALOG_STANDBY (1 << 2) +#define MT9M111_RESET_RESTART_FRAME (1 << 1) +#define MT9M111_RESET_RESET_MODE (1 << 0) + +#define MT9M111_RMB_MIRROR_COLS (1 << 1) +#define MT9M111_RMB_MIRROR_ROWS (1 << 0) +#define MT9M111_CTXT_CTRL_RESTART (1 << 15) +#define MT9M111_CTXT_CTRL_DEFECTCOR_B (1 << 12) +#define MT9M111_CTXT_CTRL_RESIZE_B (1 << 10) +#define MT9M111_CTXT_CTRL_CTRL2_B (1 << 9) +#define MT9M111_CTXT_CTRL_GAMMA_B (1 << 8) +#define MT9M111_CTXT_CTRL_XENON_EN (1 << 7) +#define MT9M111_CTXT_CTRL_READ_MODE_B (1 << 3) +#define MT9M111_CTXT_CTRL_LED_FLASH_EN (1 << 2) +#define MT9M111_CTXT_CTRL_VBLANK_SEL_B (1 << 1) +#define MT9M111_CTXT_CTRL_HBLANK_SEL_B (1 << 0) +/* + * mt9m111: Colorpipe register addresses (0x100..0x1ff) + */ +#define MT9M111_OPER_MODE_CTRL 0x106 +#define MT9M111_OUTPUT_FORMAT_CTRL 0x108 +#define MT9M111_REDUCER_XZOOM_B 0x1a0 +#define MT9M111_REDUCER_XSIZE_B 0x1a1 +#define MT9M111_REDUCER_YZOOM_B 0x1a3 +#define MT9M111_REDUCER_YSIZE_B 0x1a4 +#define MT9M111_REDUCER_XZOOM_A 0x1a6 +#define MT9M111_REDUCER_XSIZE_A 0x1a7 +#define MT9M111_REDUCER_YZOOM_A 0x1a9 +#define MT9M111_REDUCER_YSIZE_A 0x1aa + +#define MT9M111_OUTPUT_FORMAT_CTRL2_A 0x13a +#define MT9M111_OUTPUT_FORMAT_CTRL2_B 0x19b + +#define MT9M111_OPMODE_AUTOEXPO_EN (1 << 14) + + +#define MT9M111_OUTFMT_PROCESSED_BAYER (1 << 14) +#define MT9M111_OUTFMT_BYPASS_IFP (1 << 10) +#define MT9M111_OUTFMT_INV_PIX_CLOCK (1 << 9) +#define MT9M111_OUTFMT_RGB (1 << 8) +#define MT9M111_OUTFMT_RGB565 (0x0 << 6) +#define MT9M111_OUTFMT_RGB555 (0x1 << 6) +#define MT9M111_OUTFMT_RGB444x (0x2 << 6) +#define MT9M111_OUTFMT_RGBx444 (0x3 << 6) +#define MT9M111_OUTFMT_TST_RAMP_OFF (0x0 << 4) +#define MT9M111_OUTFMT_TST_RAMP_COL (0x1 << 4) +#define MT9M111_OUTFMT_TST_RAMP_ROW (0x2 << 4) +#define MT9M111_OUTFMT_TST_RAMP_FRAME (0x3 << 4) +#define MT9M111_OUTFMT_SHIFT_3_UP (1 << 3) +#define MT9M111_OUTFMT_AVG_CHROMA (1 << 2) +#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y (1 << 1) +#define MT9M111_OUTFMT_SWAP_RGB_EVEN (1 << 1) +#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr (1 << 0) +/* + * mt9m111: Camera control register addresses (0x200..0x2ff not implemented) + */ + +#define reg_read(reg) mt9m111_reg_read(icd, MT9M111_##reg) +#define reg_write(reg, val) mt9m111_reg_write(icd, MT9M111_##reg, (val)) +#define reg_set(reg, val) mt9m111_reg_set(icd, MT9M111_##reg, (val)) +#define reg_clear(reg, val) mt9m111_reg_clear(icd, MT9M111_##reg, (val)) + +#define MT9M111_MIN_DARK_ROWS 8 +#define MT9M111_MIN_DARK_COLS 24 +#define MT9M111_MAX_HEIGHT 1024 +#define MT9M111_MAX_WIDTH 1280 + +#define COL_FMT(_name, _depth, _fourcc, _colorspace) \ + { .name = _name, .depth = _depth, .fourcc = _fourcc, \ + .colorspace = _colorspace } +#define RGB_FMT(_name, _depth, _fourcc) \ + COL_FMT(_name, _depth, _fourcc, V4L2_COLORSPACE_SRGB) + +static const struct soc_camera_data_format mt9m111_colour_formats[] = { + COL_FMT("YCrYCb 8 bit", 8, V4L2_PIX_FMT_YUYV, V4L2_COLORSPACE_JPEG), + RGB_FMT("RGB 565", 16, V4L2_PIX_FMT_RGB565), + RGB_FMT("RGB 555", 16, V4L2_PIX_FMT_RGB555), + RGB_FMT("Bayer (sRGB) 10 bit", 10, V4L2_PIX_FMT_SBGGR16), + RGB_FMT("Bayer (sRGB) 8 bit", 8, V4L2_PIX_FMT_SBGGR8), +}; + +enum mt9m111_context { + HIGHPOWER = 0, + LOWPOWER, +}; + +struct mt9m111 { + struct i2c_client *client; + struct soc_camera_device icd; + int model; /* V4L2_IDENT_MT9M111* codes from v4l2-chip-ident.h */ + enum mt9m111_context context; + unsigned int left, top, width, height; + u32 pixfmt; + unsigned char autoexposure; + unsigned char datawidth; + unsigned int powered:1; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int swap_rgb_even_odd:1; + unsigned int swap_rgb_red_blue:1; + unsigned int swap_yuv_y_chromas:1; + unsigned int swap_yuv_cb_cr:1; +}; + +static int reg_page_map_set(struct i2c_client *client, const u16 reg) +{ + int ret; + u16 page; + static int lastpage = -1; /* PageMap cache value */ + + page = (reg >> 8); + if (page == lastpage) + return 0; + if (page > 2) + return -EINVAL; + + ret = i2c_smbus_write_word_data(client, MT9M111_PAGE_MAP, swab16(page)); + if (!ret) + lastpage = page; + return ret; +} + +static int mt9m111_reg_read(struct soc_camera_device *icd, const u16 reg) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct i2c_client *client = mt9m111->client; + int ret; + + ret = reg_page_map_set(client, reg); + if (!ret) + ret = swab16(i2c_smbus_read_word_data(client, (reg & 0xff))); + + dev_dbg(&icd->dev, "read reg.%03x -> %04x\n", reg, ret); + return ret; +} + +static int mt9m111_reg_write(struct soc_camera_device *icd, const u16 reg, + const u16 data) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct i2c_client *client = mt9m111->client; + int ret; + + ret = reg_page_map_set(client, reg); + if (!ret) + ret = i2c_smbus_write_word_data(mt9m111->client, (reg & 0xff), + swab16(data)); + dev_dbg(&icd->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret); + return ret; +} + +static int mt9m111_reg_set(struct soc_camera_device *icd, const u16 reg, + const u16 data) +{ + int ret; + + ret = mt9m111_reg_read(icd, reg); + if (ret >= 0) + ret = mt9m111_reg_write(icd, reg, ret | data); + return ret; +} + +static int mt9m111_reg_clear(struct soc_camera_device *icd, const u16 reg, + const u16 data) +{ + int ret; + + ret = mt9m111_reg_read(icd, reg); + return mt9m111_reg_write(icd, reg, ret & ~data); +} + +static int mt9m111_set_context(struct soc_camera_device *icd, + enum mt9m111_context ctxt) +{ + int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B + | MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B + | MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B + | MT9M111_CTXT_CTRL_VBLANK_SEL_B + | MT9M111_CTXT_CTRL_HBLANK_SEL_B; + int valA = MT9M111_CTXT_CTRL_RESTART; + + if (ctxt == HIGHPOWER) + return reg_write(CONTEXT_CONTROL, valB); + else + return reg_write(CONTEXT_CONTROL, valA); +} + +static int mt9m111_setup_rect(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret, is_raw_format; + int width = mt9m111->width; + int height = mt9m111->height; + + if ((mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8) + || (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16)) + is_raw_format = 1; + else + is_raw_format = 0; + + ret = reg_write(COLUMN_START, mt9m111->left); + if (!ret) + ret = reg_write(ROW_START, mt9m111->top); + + if (is_raw_format) { + if (!ret) + ret = reg_write(WINDOW_WIDTH, width); + if (!ret) + ret = reg_write(WINDOW_HEIGHT, height); + } else { + if (!ret) + ret = reg_write(REDUCER_XZOOM_B, MT9M111_MAX_WIDTH); + if (!ret) + ret = reg_write(REDUCER_YZOOM_B, MT9M111_MAX_HEIGHT); + if (!ret) + ret = reg_write(REDUCER_XSIZE_B, width); + if (!ret) + ret = reg_write(REDUCER_YSIZE_B, height); + if (!ret) + ret = reg_write(REDUCER_XZOOM_A, MT9M111_MAX_WIDTH); + if (!ret) + ret = reg_write(REDUCER_YZOOM_A, MT9M111_MAX_HEIGHT); + if (!ret) + ret = reg_write(REDUCER_XSIZE_A, width); + if (!ret) + ret = reg_write(REDUCER_YSIZE_A, height); + } + + return ret; +} + +static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt) +{ + int ret; + + ret = reg_write(OUTPUT_FORMAT_CTRL2_A, outfmt); + if (!ret) + ret = reg_write(OUTPUT_FORMAT_CTRL2_B, outfmt); + return ret; +} + +static int mt9m111_setfmt_bayer8(struct soc_camera_device *icd) +{ + return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_PROCESSED_BAYER); +} + +static int mt9m111_setfmt_bayer10(struct soc_camera_device *icd) +{ + return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_BYPASS_IFP); +} + +static int mt9m111_setfmt_rgb565(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int val = 0; + + if (mt9m111->swap_rgb_red_blue) + val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; + if (mt9m111->swap_rgb_even_odd) + val |= MT9M111_OUTFMT_SWAP_RGB_EVEN; + val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565; + + return mt9m111_setup_pixfmt(icd, val); +} + +static int mt9m111_setfmt_rgb555(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int val = 0; + + if (mt9m111->swap_rgb_red_blue) + val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; + if (mt9m111->swap_rgb_even_odd) + val |= MT9M111_OUTFMT_SWAP_RGB_EVEN; + val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555; + + return mt9m111_setup_pixfmt(icd, val); +} + +static int mt9m111_setfmt_yuv(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int val = 0; + + if (mt9m111->swap_yuv_cb_cr) + val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; + if (mt9m111->swap_yuv_y_chromas) + val |= MT9M111_OUTFMT_SWAP_YCbCr_C_Y; + + return mt9m111_setup_pixfmt(icd, val); +} + +static int mt9m111_enable(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct soc_camera_link *icl = mt9m111->client->dev.platform_data; + int ret; + + if (icl->power) { + ret = icl->power(&mt9m111->client->dev, 1); + if (ret < 0) { + dev_err(icd->vdev->parent, + "Platform failed to power-on the camera.\n"); + return ret; + } + } + + ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE); + if (!ret) + mt9m111->powered = 1; + return ret; +} + +static int mt9m111_disable(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct soc_camera_link *icl = mt9m111->client->dev.platform_data; + int ret; + + ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE); + if (!ret) + mt9m111->powered = 0; + + if (icl->power) + icl->power(&mt9m111->client->dev, 0); + + return ret; +} + +static int mt9m111_reset(struct soc_camera_device *icd) +{ + int ret; + + ret = reg_set(RESET, MT9M111_RESET_RESET_MODE); + if (!ret) + ret = reg_set(RESET, MT9M111_RESET_RESET_SOC); + if (!ret) + ret = reg_clear(RESET, MT9M111_RESET_RESET_MODE + | MT9M111_RESET_RESET_SOC); + return ret; +} + +static int mt9m111_start_capture(struct soc_camera_device *icd) +{ + return 0; +} + +static int mt9m111_stop_capture(struct soc_camera_device *icd) +{ + return 0; +} + +static unsigned long mt9m111_query_bus_param(struct soc_camera_device *icd) +{ + return SOCAM_MASTER | SOCAM_PCLK_SAMPLE_RISING | + SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | + SOCAM_DATAWIDTH_8; +} + +static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f) +{ + return 0; +} + +static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + switch (pixfmt) { + case V4L2_PIX_FMT_SBGGR8: + ret = mt9m111_setfmt_bayer8(icd); + break; + case V4L2_PIX_FMT_SBGGR16: + ret = mt9m111_setfmt_bayer10(icd); + break; + case V4L2_PIX_FMT_RGB555: + ret = mt9m111_setfmt_rgb555(icd); + break; + case V4L2_PIX_FMT_RGB565: + ret = mt9m111_setfmt_rgb565(icd); + break; + case V4L2_PIX_FMT_YUYV: + ret = mt9m111_setfmt_yuv(icd); + break; + default: + dev_err(&icd->dev, "Pixel format not handled : %x\n", pixfmt); + ret = -EINVAL; + } + + if (!ret) + mt9m111->pixfmt = pixfmt; + + return ret; +} + +static int mt9m111_set_fmt_cap(struct soc_camera_device *icd, + __u32 pixfmt, struct v4l2_rect *rect) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + mt9m111->left = rect->left; + mt9m111->top = rect->top; + mt9m111->width = rect->width; + mt9m111->height = rect->height; + + dev_dbg(&icd->dev, "%s fmt=%x left=%d, top=%d, width=%d, height=%d\n", + __func__, pixfmt, mt9m111->left, mt9m111->top, mt9m111->width, + mt9m111->height); + + ret = mt9m111_setup_rect(icd); + if (!ret) + ret = mt9m111_set_pixfmt(icd, pixfmt); + return ret; +} + +static int mt9m111_try_fmt_cap(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + if (f->fmt.pix.height > MT9M111_MAX_HEIGHT) + f->fmt.pix.height = MT9M111_MAX_HEIGHT; + if (f->fmt.pix.width > MT9M111_MAX_WIDTH) + f->fmt.pix.width = MT9M111_MAX_WIDTH; + + return 0; +} + +static int mt9m111_get_chip_id(struct soc_camera_device *icd, + struct v4l2_chip_ident *id) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + if (id->match_type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match_chip != mt9m111->client->addr) + return -ENODEV; + + id->ident = mt9m111->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m111_get_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + int val; + + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff) + return -EINVAL; + if (reg->match_chip != mt9m111->client->addr) + return -ENODEV; + + val = mt9m111_reg_read(icd, reg->reg); + reg->val = (u64)val; + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m111_set_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff) + return -EINVAL; + + if (reg->match_chip != mt9m111->client->addr) + return -ENODEV; + + if (mt9m111_reg_write(icd, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static const struct v4l2_queryctrl mt9m111_controls[] = { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Verticaly", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Horizontaly", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { /* gain = 1/32*val (=>gain=1 if val==32) */ + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 63 * 2 * 2, + .step = 1, + .default_value = 32, + .flags = V4L2_CTRL_FLAG_SLIDER, + }, { + .id = V4L2_CID_EXPOSURE_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + } +}; + +static int mt9m111_video_probe(struct soc_camera_device *); +static void mt9m111_video_remove(struct soc_camera_device *); +static int mt9m111_get_control(struct soc_camera_device *, + struct v4l2_control *); +static int mt9m111_set_control(struct soc_camera_device *, + struct v4l2_control *); +static int mt9m111_resume(struct soc_camera_device *icd); +static int mt9m111_init(struct soc_camera_device *icd); +static int mt9m111_release(struct soc_camera_device *icd); + +static struct soc_camera_ops mt9m111_ops = { + .owner = THIS_MODULE, + .probe = mt9m111_video_probe, + .remove = mt9m111_video_remove, + .init = mt9m111_init, + .resume = mt9m111_resume, + .release = mt9m111_release, + .start_capture = mt9m111_start_capture, + .stop_capture = mt9m111_stop_capture, + .set_fmt_cap = mt9m111_set_fmt_cap, + .try_fmt_cap = mt9m111_try_fmt_cap, + .query_bus_param = mt9m111_query_bus_param, + .set_bus_param = mt9m111_set_bus_param, + .controls = mt9m111_controls, + .num_controls = ARRAY_SIZE(mt9m111_controls), + .get_control = mt9m111_get_control, + .set_control = mt9m111_set_control, + .get_chip_id = mt9m111_get_chip_id, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .get_register = mt9m111_get_register, + .set_register = mt9m111_set_register, +#endif +}; + +static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + if (mt9m111->context == HIGHPOWER) { + if (flip) + ret = reg_set(READ_MODE_B, mask); + else + ret = reg_clear(READ_MODE_B, mask); + } else { + if (flip) + ret = reg_set(READ_MODE_A, mask); + else + ret = reg_clear(READ_MODE_A, mask); + } + + return ret; +} + +static int mt9m111_get_global_gain(struct soc_camera_device *icd) +{ + unsigned int data, gain; + + data = reg_read(GLOBAL_GAIN); + if (data >= 0) + gain = ((data & (1 << 10)) * 2) + | ((data & (1 << 9)) * 2) + | (data & 0x2f); + else + gain = data; + + return gain; +} +static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain) +{ + u16 val; + + if (gain > 63 * 2 * 2) + return -EINVAL; + + icd->gain = gain; + if ((gain >= 64 * 2) && (gain < 63 * 2 * 2)) + val = (1 << 10) | (1 << 9) | (gain / 4); + else if ((gain >= 64) && (gain < 64 * 2)) + val = (1 << 9) | (gain / 2); + else + val = gain; + + return reg_write(GLOBAL_GAIN, val); +} + +static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + if (on) + ret = reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); + else + ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); + + if (!ret) + mt9m111->autoexposure = on; + + return ret; +} +static int mt9m111_get_control(struct soc_camera_device *icd, + struct v4l2_control *ctrl) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (mt9m111->context == HIGHPOWER) + data = reg_read(READ_MODE_B); + else + data = reg_read(READ_MODE_A); + + if (data < 0) + return -EIO; + ctrl->value = !!(data & MT9M111_RMB_MIRROR_ROWS); + break; + case V4L2_CID_HFLIP: + if (mt9m111->context == HIGHPOWER) + data = reg_read(READ_MODE_B); + else + data = reg_read(READ_MODE_A); + + if (data < 0) + return -EIO; + ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS); + break; + case V4L2_CID_GAIN: + data = mt9m111_get_global_gain(icd); + if (data < 0) + return data; + ctrl->value = data; + break; + case V4L2_CID_EXPOSURE_AUTO: + ctrl->value = mt9m111->autoexposure; + break; + } + return 0; +} + +static int mt9m111_set_control(struct soc_camera_device *icd, + struct v4l2_control *ctrl) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + const struct v4l2_queryctrl *qctrl; + int ret; + + qctrl = soc_camera_find_qctrl(&mt9m111_ops, ctrl->id); + + if (!qctrl) + return -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + mt9m111->vflip = ctrl->value; + ret = mt9m111_set_flip(icd, ctrl->value, + MT9M111_RMB_MIRROR_ROWS); + break; + case V4L2_CID_HFLIP: + mt9m111->hflip = ctrl->value; + ret = mt9m111_set_flip(icd, ctrl->value, + MT9M111_RMB_MIRROR_COLS); + break; + case V4L2_CID_GAIN: + ret = mt9m111_set_global_gain(icd, ctrl->value); + break; + case V4L2_CID_EXPOSURE_AUTO: + ret = mt9m111_set_autoexposure(icd, ctrl->value); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int mt9m111_restore_state(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + mt9m111_set_context(icd, mt9m111->context); + mt9m111_set_pixfmt(icd, mt9m111->pixfmt); + mt9m111_setup_rect(icd); + mt9m111_set_flip(icd, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS); + mt9m111_set_flip(icd, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS); + mt9m111_set_global_gain(icd, icd->gain); + mt9m111_set_autoexposure(icd, mt9m111->autoexposure); + return 0; +} + +static int mt9m111_resume(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret = 0; + + if (mt9m111->powered) { + ret = mt9m111_enable(icd); + if (!ret) + ret = mt9m111_reset(icd); + if (!ret) + ret = mt9m111_restore_state(icd); + } + return ret; +} + +static int mt9m111_init(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + mt9m111->context = HIGHPOWER; + ret = mt9m111_enable(icd); + if (!ret) + ret = mt9m111_reset(icd); + if (!ret) + ret = mt9m111_set_context(icd, mt9m111->context); + if (!ret) + ret = mt9m111_set_autoexposure(icd, mt9m111->autoexposure); + if (ret) + dev_err(&icd->dev, "mt9m111 init failed: %d\n", ret); + return ret; +} + +static int mt9m111_release(struct soc_camera_device *icd) +{ + int ret; + + ret = mt9m111_disable(icd); + if (ret < 0) + dev_err(&icd->dev, "mt9m111 release failed: %d\n", ret); + + return ret; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m111_video_probe(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + s32 data; + int ret; + + /* + * We must have a parent by now. And it cannot be a wrong one. + * So this entire test is completely redundant. + */ + if (!icd->dev.parent || + to_soc_camera_host(icd->dev.parent)->nr != icd->iface) + return -ENODEV; + + ret = mt9m111_enable(icd); + if (ret) + goto ei2c; + ret = mt9m111_reset(icd); + if (ret) + goto ei2c; + + data = reg_read(CHIP_VERSION); + + switch (data) { + case 0x143a: + mt9m111->model = V4L2_IDENT_MT9M111; + icd->formats = mt9m111_colour_formats; + icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats); + break; + default: + ret = -ENODEV; + dev_err(&icd->dev, + "No MT9M111 chip detected, register read %x\n", data); + goto ei2c; + } + + dev_info(&icd->dev, "Detected a MT9M111 chip ID 0x143a\n"); + + ret = soc_camera_video_start(icd); + if (ret) + goto eisis; + + mt9m111->autoexposure = 1; + + mt9m111->swap_rgb_even_odd = 1; + mt9m111->swap_rgb_red_blue = 1; + + return 0; +eisis: +ei2c: + return ret; +} + +static void mt9m111_video_remove(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m111->client->addr, + mt9m111->icd.dev.parent, mt9m111->icd.vdev); + soc_camera_video_stop(&mt9m111->icd); +} + +static int mt9m111_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9m111 *mt9m111; + struct soc_camera_device *icd; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_link *icl = client->dev.platform_data; + int ret; + + if (!icl) { + dev_err(&client->dev, "MT9M111 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m111 = kzalloc(sizeof(struct mt9m111), GFP_KERNEL); + if (!mt9m111) + return -ENOMEM; + + mt9m111->client = client; + i2c_set_clientdata(client, mt9m111); + + /* Second stage probe - when a capture adapter is there */ + icd = &mt9m111->icd; + icd->ops = &mt9m111_ops; + icd->control = &client->dev; + icd->x_min = MT9M111_MIN_DARK_COLS; + icd->y_min = MT9M111_MIN_DARK_ROWS; + icd->x_current = icd->x_min; + icd->y_current = icd->y_min; + icd->width_min = MT9M111_MIN_DARK_ROWS; + icd->width_max = MT9M111_MAX_WIDTH; + icd->height_min = MT9M111_MIN_DARK_COLS; + icd->height_max = MT9M111_MAX_HEIGHT; + icd->y_skip_top = 0; + icd->iface = icl->bus_id; + + ret = soc_camera_device_register(icd); + if (ret) + goto eisdr; + return 0; + +eisdr: + kfree(mt9m111); + return ret; +} + +static int mt9m111_remove(struct i2c_client *client) +{ + struct mt9m111 *mt9m111 = i2c_get_clientdata(client); + soc_camera_device_unregister(&mt9m111->icd); + kfree(mt9m111); + + return 0; +} + +static const struct i2c_device_id mt9m111_id[] = { + { "mt9m111", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m111_id); + +static struct i2c_driver mt9m111_i2c_driver = { + .driver = { + .name = "mt9m111", + }, + .probe = mt9m111_probe, + .remove = mt9m111_remove, + .id_table = mt9m111_id, +}; + +static int __init mt9m111_mod_init(void) +{ + return i2c_add_driver(&mt9m111_i2c_driver); +} + +static void __exit mt9m111_mod_exit(void) +{ + i2c_del_driver(&mt9m111_i2c_driver); +} + +module_init(mt9m111_mod_init); +module_exit(mt9m111_mod_exit); + +MODULE_DESCRIPTION("Micron MT9M111 Camera driver"); +MODULE_AUTHOR("Robert Jarzmik"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 56808cd2f8a..2584201059d 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -134,34 +134,56 @@ static int reg_clear(struct soc_camera_device *icd, const u8 reg, static int mt9v022_init(struct soc_camera_device *icd) { struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + struct soc_camera_link *icl = mt9v022->client->dev.platform_data; int ret; + if (icl->power) { + ret = icl->power(&mt9v022->client->dev, 1); + if (ret < 0) { + dev_err(icd->vdev->parent, + "Platform failed to power-on the camera.\n"); + return ret; + } + } + + /* + * The camera could have been already on, we hard-reset it additionally, + * if available. Soft reset is done in video_probe(). + */ + if (icl->reset) + icl->reset(&mt9v022->client->dev); + /* Almost the default mode: master, parallel, simultaneous, and an * undocumented bit 0x200, which is present in table 7, but not in 8, * plus snapshot mode to disable scan for now */ mt9v022->chip_control |= 0x10; ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control); - if (ret >= 0) - reg_write(icd, MT9V022_READ_MODE, 0x300); + if (!ret) + ret = reg_write(icd, MT9V022_READ_MODE, 0x300); /* All defaults */ - if (ret >= 0) + if (!ret) /* AEC, AGC on */ ret = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x3); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480); - if (ret >= 0) + if (!ret) /* default - auto */ ret = reg_clear(icd, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_DIGITAL_TEST_PATTERN, 0); - return ret >= 0 ? 0 : -EIO; + return ret; } static int mt9v022_release(struct soc_camera_device *icd) { - /* Nothing? */ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + struct soc_camera_link *icl = mt9v022->client->dev.platform_data; + + if (icl->power) + icl->power(&mt9v022->client->dev, 0); + return 0; } @@ -352,21 +374,21 @@ static int mt9v022_set_fmt_cap(struct soc_camera_device *icd, rect->height + icd->y_skip_top + 43); } /* Setup frame format: defaults apart from width and height */ - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_COLUMN_START, rect->left); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_ROW_START, rect->top); - if (ret >= 0) + if (!ret) /* Default 94, Phytec driver says: * "width + horizontal blank >= 660" */ ret = reg_write(icd, MT9V022_HORIZONTAL_BLANKING, rect->width > 660 - 43 ? 43 : 660 - rect->width); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_VERTICAL_BLANKING, 45); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_WINDOW_WIDTH, rect->width); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_WINDOW_HEIGHT, rect->height + icd->y_skip_top); @@ -717,7 +739,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd) icd->num_formats = 1; } - if (ret >= 0) + if (!ret) ret = soc_camera_video_start(icd); if (ret < 0) goto eisis; diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 8ef578caba3..7f130284b5c 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -27,6 +27,7 @@ #include <media/tuner.h> #include <linux/video_decoder.h> #include <media/v4l2-common.h> +#include <media/saa7115.h> #include "mxb.h" #include "tea6415c.h" @@ -122,6 +123,8 @@ static struct saa7146_extension_ioctls ioctls[] = { { VIDIOC_S_FREQUENCY, SAA7146_EXCLUSIVE }, { VIDIOC_G_AUDIO, SAA7146_EXCLUSIVE }, { VIDIOC_S_AUDIO, SAA7146_EXCLUSIVE }, + { VIDIOC_DBG_G_REGISTER, SAA7146_EXCLUSIVE }, + { VIDIOC_DBG_S_REGISTER, SAA7146_EXCLUSIVE }, { MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */ { MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */ { 0, 0 } @@ -134,12 +137,12 @@ struct mxb struct i2c_adapter i2c_adapter; - struct i2c_client* saa7111a; - struct i2c_client* tda9840; - struct i2c_client* tea6415c; - struct i2c_client* tuner; - struct i2c_client* tea6420_1; - struct i2c_client* tea6420_2; + struct i2c_client *saa7111a; + struct i2c_client *tda9840; + struct i2c_client *tea6415c; + struct i2c_client *tuner; + struct i2c_client *tea6420_1; + struct i2c_client *tea6420_2; int cur_mode; /* current audio mode (mono, stereo, ...) */ int cur_input; /* current input */ @@ -151,23 +154,23 @@ static struct saa7146_extension extension; static int mxb_check_clients(struct device *dev, void *data) { - struct mxb* mxb = data; + struct mxb *mxb = data; struct i2c_client *client = i2c_verify_client(dev); - if( !client ) + if (!client) return 0; - if( I2C_ADDR_TEA6420_1 == client->addr ) + if (I2C_ADDR_TEA6420_1 == client->addr) mxb->tea6420_1 = client; - if( I2C_ADDR_TEA6420_2 == client->addr ) + if (I2C_ADDR_TEA6420_2 == client->addr) mxb->tea6420_2 = client; - if( I2C_TEA6415C_2 == client->addr ) + if (I2C_TEA6415C_2 == client->addr) mxb->tea6415c = client; - if( I2C_ADDR_TDA9840 == client->addr ) + if (I2C_ADDR_TDA9840 == client->addr) mxb->tda9840 = client; - if( I2C_SAA7111 == client->addr ) + if (I2C_SAA7111 == client->addr) mxb->saa7111a = client; - if( 0x60 == client->addr ) + if (0x60 == client->addr) mxb->tuner = client; return 0; @@ -178,23 +181,28 @@ static int mxb_probe(struct saa7146_dev* dev) struct mxb* mxb = NULL; int result; - if ((result = request_module("saa7111")) < 0) { + result = request_module("saa7115"); + if (result < 0) { printk("mxb: saa7111 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tea6420")) < 0) { + result = request_module("tea6420"); + if (result < 0) { printk("mxb: tea6420 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tea6415c")) < 0) { + result = request_module("tea6415c"); + if (result < 0) { printk("mxb: tea6415c i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tda9840")) < 0) { + result = request_module("tda9840"); + if (result < 0) { printk("mxb: tda9840 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tuner")) < 0) { + result = request_module("tuner"); + if (result < 0) { printk("mxb: tuner i2c module not available.\n"); return -ENODEV; } @@ -207,9 +215,10 @@ static int mxb_probe(struct saa7146_dev* dev) mxb->i2c_adapter = (struct i2c_adapter) { .class = I2C_CLASS_TV_ANALOG, - .name = "mxb", }; + snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num); + saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); if(i2c_add_adapter(&mxb->i2c_adapter) < 0) { DEB_S(("cannot register i2c-device. skipping.\n")); @@ -290,38 +299,7 @@ static struct { { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, { 3, { 0x80, 0xb3, 0x0a } }, - {-1, { 0} } -}; - -static const unsigned char mxb_saa7111_init[] = { - 0x00, 0x00, /* 00 - ID byte */ - 0x01, 0x00, /* 01 - reserved */ - - /*front end */ - 0x02, 0xd8, /* 02 - FUSE=x, GUDL=x, MODE=x */ - 0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */ - 0x04, 0x00, /* 04 - GAI1=256 */ - 0x05, 0x00, /* 05 - GAI2=256 */ - - /* decoder */ - 0x06, 0xf0, /* 06 - HSB at xx(50Hz) / xx(60Hz) pixels after end of last line */ - 0x07, 0x30, /* 07 - HSS at xx(50Hz) / xx(60Hz) pixels after end of last line */ - 0x08, 0xa8, /* 08 - AUFD=x, FSEL=x, EXFIL=x, VTRC=x, HPLL=x, VNOI=x */ - 0x09, 0x02, /* 09 - BYPS=x, PREF=x, BPSS=x, VBLB=x, UPTCV=x, APER=x */ - 0x0a, 0x80, /* 0a - BRIG=128 */ - 0x0b, 0x47, /* 0b - CONT=1.109 */ - 0x0c, 0x40, /* 0c - SATN=1.0 */ - 0x0d, 0x00, /* 0d - HUE=0 */ - 0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, FCTC=0, CHBW=1 */ - 0x0f, 0x00, /* 0f - reserved */ - 0x10, 0xd0, /* 10 - OFTS=x, HDEL=x, VRLN=x, YDEL=x */ - 0x11, 0x8c, /* 11 - GPSW=x, CM99=x, FECO=x, COMPO=x, OEYC=1, OEHV=1, VIPB=0, COLO=0 */ - 0x12, 0x80, /* 12 - xx output control 2 */ - 0x13, 0x30, /* 13 - xx output control 3 */ - 0x14, 0x00, /* 14 - reserved */ - 0x15, 0x15, /* 15 - VBI */ - 0x16, 0x04, /* 16 - VBI */ - 0x17, 0x00, /* 17 - VBI */ + {-1, { 0 } } }; /* bring hardware to a sane state. this has to be done, just in case someone @@ -331,37 +309,28 @@ static const unsigned char mxb_saa7111_init[] = { static int mxb_init_done(struct saa7146_dev* dev) { struct mxb* mxb = (struct mxb*)dev->ext_priv; - struct video_decoder_init init; struct i2c_msg msg; struct tuner_setup tun_setup; v4l2_std_id std = V4L2_STD_PAL_BG; + struct v4l2_routing route; int i = 0, err = 0; - struct tea6415c_multiplex vm; + struct tea6415c_multiplex vm; /* select video mode in saa7111a */ - i = VIDEO_MODE_PAL; - /* fixme: currently pointless: gets overwritten by configuration below */ - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_NORM, &i); - - /* write configuration to saa7111a */ - init.data = mxb_saa7111_init; - init.len = sizeof(mxb_saa7111_init); - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_INIT, &init); + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_S_STD, &std); /* select tuner-output on saa7111a */ i = 0; - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i); - - /* enable vbi bypass */ - i = 1; - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_VBI_BYPASS, &i); + route.input = SAA7115_COMPOSITE0; + route.output = SAA7111_FMT_CCIR | SAA7111_VBI_BYPASS; + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_VIDEO_ROUTING, &route); /* select a tuner type */ tun_setup.mode_mask = T_ANALOG_TV; tun_setup.addr = ADDR_UNSET; tun_setup.type = TUNER_PHILIPS_PAL; - mxb->tuner->driver->command(mxb->tuner,TUNER_SET_TYPE_ADDR, &tun_setup); + mxb->tuner->driver->command(mxb->tuner, TUNER_SET_TYPE_ADDR, &tun_setup); /* tune in some frequency on tuner */ mxb->cur_freq.tuner = 0; mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; @@ -373,27 +342,26 @@ static int mxb_init_done(struct saa7146_dev* dev) mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); /* mute audio on tea6420s */ - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]); - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[6][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[6][1]); + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, &TEA6420_line[6][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, &TEA6420_line[6][1]); + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, &TEA6420_cd[6][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, &TEA6420_cd[6][1]); /* switch to tuner-channel on tea6415c*/ vm.out = 17; vm.in = 3; - mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); + mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm); /* select tuner-output on multicable on tea6415c*/ vm.in = 3; vm.out = 13; - mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); + mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm); /* the rest for mxb */ mxb->cur_input = 0; mxb->cur_mute = 1; mxb->cur_mode = V4L2_TUNER_MODE_STEREO; - mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &mxb->cur_mode); /* check if the saa7740 (aka 'sound arena module') is present on the mxb. if so, we must initialize it. due to lack of @@ -404,21 +372,22 @@ static int mxb_init_done(struct saa7146_dev* dev) msg.len = mxb_saa7740_init[0].length; msg.buf = &mxb_saa7740_init[0].data[0]; - if( 1 == (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { + err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); + if (err == 1) { /* the sound arena module is a pos, that's probably the reason philips refuses to hand out a datasheet for the saa7740... it seems to screw up the i2c bus, so we disable fast irq based i2c transactions here and rely on the slow and safe polling method ... */ extension.flags &= ~SAA7146_USE_I2C_IRQ; - for(i = 1;;i++) { - if( -1 == mxb_saa7740_init[i].length ) { + for (i = 1; ; i++) { + if (-1 == mxb_saa7740_init[i].length) break; - } msg.len = mxb_saa7740_init[i].length; msg.buf = &mxb_saa7740_init[i].data[0]; - if( 1 != (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { + err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); + if (err != 1) { DEB_D(("failed to initialize 'sound arena module'.\n")); goto err; } @@ -432,7 +401,8 @@ err: /* ext->saa has been filled by the core driver */ /* some stuff is done via variables */ - saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, input_port_selection[mxb->cur_input].hps_sync); + saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, + input_port_selection[mxb->cur_input].hps_sync); /* some stuff is done via direct write to the registers */ @@ -457,24 +427,24 @@ void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) static struct saa7146_ext_vv vv_data; /* this function only gets called when the probing was successful */ -static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) +static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) { - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; - DEB_EE(("dev:%p\n",dev)); + DEB_EE(("dev:%p\n", dev)); /* checking for i2c-devices can be omitted here, because we already did this in "mxb_vl42_probe" */ - saa7146_vv_init(dev,&vv_data); - if( 0 != saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { + saa7146_vv_init(dev, &vv_data); + if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { ERR(("cannot register capture v4l2 device. skipping.\n")); return -1; } /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ - if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { - if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { + if (MXB_BOARD_CAN_DO_VBI(dev)) { + if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { ERR(("cannot register vbi v4l2 device. skipping.\n")); } } @@ -486,18 +456,18 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data i2c_use_client(mxb->saa7111a); i2c_use_client(mxb->tuner); - printk("mxb: found 'Multimedia eXtension Board'-%d.\n",mxb_num); + printk("mxb: found Multimedia eXtension Board #%d.\n", mxb_num); mxb_num++; mxb_init_done(dev); return 0; } -static int mxb_detach(struct saa7146_dev* dev) +static int mxb_detach(struct saa7146_dev *dev) { - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; - DEB_EE(("dev:%p\n",dev)); + DEB_EE(("dev:%p\n", dev)); i2c_release_client(mxb->tea6420_1); i2c_release_client(mxb->tea6420_2); @@ -507,9 +477,8 @@ static int mxb_detach(struct saa7146_dev* dev) i2c_release_client(mxb->tuner); saa7146_unregister_device(&mxb->video_dev,dev); - if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { - saa7146_unregister_device(&mxb->vbi_dev,dev); - } + if (MXB_BOARD_CAN_DO_VBI(dev)) + saa7146_unregister_device(&mxb->vbi_dev, dev); saa7146_vv_release(dev); mxb_num--; @@ -523,7 +492,7 @@ static int mxb_detach(struct saa7146_dev* dev) static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct saa7146_dev *dev = fh->dev; - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; struct saa7146_vv *vv = dev->vv_data; switch(cmd) { @@ -532,11 +501,9 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct v4l2_input *i = arg; DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); - if( i->index < 0 || i->index >= MXB_INPUTS) { + if (i->index < 0 || i->index >= MXB_INPUTS) return -EINVAL; - } memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); - return 0; } /* the saa7146 provides some controls (brightness, contrast, saturation) @@ -550,7 +517,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) for (i = MAXCONTROLS - 1; i >= 0; i--) { if (mxb_controls[i].id == qc->id) { *qc = mxb_controls[i]; - DEB_D(("VIDIOC_QUERYCTRL %d.\n",qc->id)); + DEB_D(("VIDIOC_QUERYCTRL %d.\n", qc->id)); return 0; } } @@ -562,56 +529,51 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) int i; for (i = MAXCONTROLS - 1; i >= 0; i--) { - if (mxb_controls[i].id == vc->id) { + if (mxb_controls[i].id == vc->id) break; - } } - if( i < 0 ) { + if (i < 0) return -EAGAIN; - } - switch (vc->id ) { - case V4L2_CID_AUDIO_MUTE: { - vc->value = mxb->cur_mute; - DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); - return 0; - } + if (vc->id == V4L2_CID_AUDIO_MUTE) { + vc->value = mxb->cur_mute; + DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value)); + return 0; } - DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); + DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value)); return 0; } case VIDIOC_S_CTRL: { - struct v4l2_control *vc = arg; + struct v4l2_control *vc = arg; int i = 0; for (i = MAXCONTROLS - 1; i >= 0; i--) { - if (mxb_controls[i].id == vc->id) { + if (mxb_controls[i].id == vc->id) break; - } } - if( i < 0 ) { + if (i < 0) return -EAGAIN; - } - switch (vc->id ) { - case V4L2_CID_AUDIO_MUTE: { - mxb->cur_mute = vc->value; - if( 0 == vc->value ) { - /* switch the audio-source */ - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][1]); - } else { - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]); - } - DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n",vc->value)); - break; + if (vc->id == V4L2_CID_AUDIO_MUTE) { + mxb->cur_mute = vc->value; + if (!vc->value) { + /* switch the audio-source */ + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[mxb->cur_input]][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[mxb->cur_input]][1]); + } else { + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, + &TEA6420_line[6][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, + &TEA6420_line[6][1]); } + DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n", vc->value)); } return 0; } @@ -620,106 +582,84 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) int *input = (int *)arg; *input = mxb->cur_input; - DEB_EE(("VIDIOC_G_INPUT %d.\n",*input)); + DEB_EE(("VIDIOC_G_INPUT %d.\n", *input)); return 0; } case VIDIOC_S_INPUT: { int input = *(int *)arg; - struct tea6415c_multiplex vm; + struct tea6415c_multiplex vm; + struct v4l2_routing route; int i = 0; - DEB_EE(("VIDIOC_S_INPUT %d.\n",input)); + DEB_EE(("VIDIOC_S_INPUT %d.\n", input)); - if (input < 0 || input >= MXB_INPUTS) { + if (input < 0 || input >= MXB_INPUTS) return -EINVAL; - } - - /* fixme: locke das setzen des inputs mit hilfe des mutexes - mutex_lock(&dev->lock); - video_mux(dev,*i); - mutex_unlock(&dev->lock); - */ - - /* fixme: check if streaming capture - if ( 0 != dev->streaming ) { - DEB_D(("VIDIOC_S_INPUT illegal while streaming.\n")); - return -EPERM; - } - */ mxb->cur_input = input; - saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); + saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, + input_port_selection[input].hps_sync); /* prepare switching of tea6415c and saa7111a; have a look at the 'background'-file for further informations */ - switch( input ) { - - case TUNER: - { - i = 0; - vm.in = 3; - vm.out = 17; - - if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { - printk("VIDIOC_S_INPUT: could not address tea6415c #1\n"); - return -EFAULT; - } - /* connect tuner-output always to multicable */ - vm.in = 3; - vm.out = 13; - break; - } - case AUX3_YC: - { - /* nothing to be done here. aux3_yc is - directly connected to the saa711a */ - i = 5; - break; - } - case AUX3: - { - /* nothing to be done here. aux3 is - directly connected to the saa711a */ - i = 1; - break; - } - case AUX1: - { - i = 0; - vm.in = 1; - vm.out = 17; - break; + switch (input) { + case TUNER: + i = SAA7115_COMPOSITE0; + vm.in = 3; + vm.out = 17; + + if (mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm)) { + printk(KERN_ERR "VIDIOC_S_INPUT: could not address tea6415c #1\n"); + return -EFAULT; } + /* connect tuner-output always to multicable */ + vm.in = 3; + vm.out = 13; + break; + case AUX3_YC: + /* nothing to be done here. aux3_yc is + directly connected to the saa711a */ + i = SAA7115_SVIDEO1; + break; + case AUX3: + /* nothing to be done here. aux3 is + directly connected to the saa711a */ + i = SAA7115_COMPOSITE1; + break; + case AUX1: + i = SAA7115_COMPOSITE0; + vm.in = 1; + vm.out = 17; + break; } /* switch video in tea6415c only if necessary */ - switch( input ) { - case TUNER: - case AUX1: - { - if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { - printk("VIDIOC_S_INPUT: could not address tea6415c #3\n"); - return -EFAULT; - } - break; - } - default: - { - break; + switch (input) { + case TUNER: + case AUX1: + if (mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm)) { + printk(KERN_ERR "VIDIOC_S_INPUT: could not address tea6415c #3\n"); + return -EFAULT; } + break; + default: + break; } /* switch video in saa7111a */ - if ( 0 != mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i)) { + route.input = i; + route.output = 0; + if (mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_VIDEO_ROUTING, &route)) printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n"); - } /* switch the audio-source only if necessary */ if( 0 == mxb->cur_mute ) { - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][1]); + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[input]][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[input]][1]); } return 0; @@ -727,114 +667,44 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case VIDIOC_G_TUNER: { struct v4l2_tuner *t = arg; - int byte = 0; - if( 0 != t->index ) { + if (t->index) { DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index)); return -EINVAL; } DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index)); - memset(t,0,sizeof(*t)); - strcpy(t->name, "Television"); + memset(t, 0, sizeof(*t)); + i2c_clients_command(&mxb->i2c_adapter, cmd, arg); + strlcpy(t->name, "TV Tuner", sizeof(t->name)); t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; - t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */ - t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */ - /* FIXME: add the real signal strength here */ - t->signal = 0xffff; - t->afc = 0; - - mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte); + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | \ + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; t->audmode = mxb->cur_mode; - - if( byte < 0 ) { - t->rxsubchans = V4L2_TUNER_SUB_MONO; - } else { - switch(byte) { - case TDA9840_MONO_DETECT: { - t->rxsubchans = V4L2_TUNER_SUB_MONO; - DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_MONO.\n")); - break; - } - case TDA9840_DUAL_DETECT: { - t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; - DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_LANG1.\n")); - break; - } - case TDA9840_STEREO_DETECT: { - t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; - DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_STEREO.\n")); - break; - } - default: { /* TDA9840_INCORRECT_DETECT */ - t->rxsubchans = V4L2_TUNER_MODE_MONO; - DEB_D(("VIDIOC_G_TUNER: TDA9840_INCORRECT_DETECT => V4L2_TUNER_MODE_MONO\n")); - break; - } - } - } - return 0; } case VIDIOC_S_TUNER: { struct v4l2_tuner *t = arg; - int result = 0; - int byte = 0; - if( 0 != t->index ) { + if (t->index) { DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index)); return -EINVAL; } - switch(t->audmode) { - case V4L2_TUNER_MODE_STEREO: { - mxb->cur_mode = V4L2_TUNER_MODE_STEREO; - byte = TDA9840_SET_STEREO; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n")); - break; - } - case V4L2_TUNER_MODE_LANG1_LANG2: { - mxb->cur_mode = V4L2_TUNER_MODE_LANG1_LANG2; - byte = TDA9840_SET_BOTH; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n")); - break; - } - case V4L2_TUNER_MODE_LANG1: { - mxb->cur_mode = V4L2_TUNER_MODE_LANG1; - byte = TDA9840_SET_LANG1; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n")); - break; - } - case V4L2_TUNER_MODE_LANG2: { - mxb->cur_mode = V4L2_TUNER_MODE_LANG2; - byte = TDA9840_SET_LANG2; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n")); - break; - } - default: { /* case V4L2_TUNER_MODE_MONO: {*/ - mxb->cur_mode = V4L2_TUNER_MODE_MONO; - byte = TDA9840_SET_MONO; - DEB_D(("VIDIOC_S_TUNER: TDA9840_SET_MONO\n")); - break; - } - } - - if( 0 != (result = mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &byte))) { - printk("VIDIOC_S_TUNER error. result:%d, byte:%d\n",result,byte); - } - + mxb->cur_mode = t->audmode; + i2c_clients_command(&mxb->i2c_adapter, cmd, arg); return 0; } case VIDIOC_G_FREQUENCY: { struct v4l2_frequency *f = arg; - if(0 != mxb->cur_input) { - DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); + if (mxb->cur_input) { + DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n", + mxb->cur_input)); return -EINVAL; } @@ -847,14 +717,14 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (0 != f->tuner) + if (f->tuner) return -EINVAL; if (V4L2_TUNER_ANALOG_TV != f->type) return -EINVAL; - if(0 != mxb->cur_input) { - DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); + if (mxb->cur_input) { + DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n", mxb->cur_input)); return -EINVAL; } @@ -875,7 +745,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { int i = *(int*)arg; - if( i < 0 || i >= MXB_AUDIOS ) { + if (i < 0 || i >= MXB_AUDIOS) { DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i)); return -EINVAL; } @@ -891,7 +761,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { int i = *(int*)arg; - if( i < 0 || i >= MXB_AUDIOS ) { + if (i < 0 || i >= MXB_AUDIOS) { DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i)); return -EINVAL; } @@ -906,12 +776,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_audio *a = arg; - if( a->index < 0 || a->index > MXB_INPUTS ) { - DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index)); + if (a->index < 0 || a->index > MXB_INPUTS) { + DEB_D(("VIDIOC_G_AUDIO %d out of range.\n", a->index)); return -EINVAL; } - DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index)); + DEB_EE(("VIDIOC_G_AUDIO %d.\n", a->index)); memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio)); return 0; @@ -919,9 +789,16 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case VIDIOC_S_AUDIO: { struct v4l2_audio *a = arg; - DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index)); + + DEB_D(("VIDIOC_S_AUDIO %d.\n", a->index)); return 0; } +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_DBG_S_REGISTER: + case VIDIOC_DBG_G_REGISTER: + i2c_clients_command(&mxb->i2c_adapter, cmd, arg); + return 0; +#endif default: /* DEB2(printk("does not handle this ioctl.\n")); @@ -944,7 +821,7 @@ static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standa /* set the 7146 gpio register -- I don't know what this does exactly */ saa7146_write(dev, GPIO_CTRL, 0x00404050); /* unset the 7111 gpio register -- I don't know what this does exactly */ - mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero); + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_GPIO, &zero); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); } else { v4l2_std_id std = V4L2_STD_PAL_BG; @@ -953,7 +830,7 @@ static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standa /* set the 7146 gpio register -- I don't know what this does exactly */ saa7146_write(dev, GPIO_CTRL, 0x00404050); /* set the 7111 gpio register -- I don't know what this does exactly */ - mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one); + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_GPIO, &one); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); } return 0; @@ -1029,7 +906,7 @@ static struct saa7146_extension extension = { static int __init mxb_init_module(void) { - if( 0 != saa7146_register_extension(&extension)) { + if (saa7146_register_extension(&extension)) { DEB_S(("failed to register extension.\n")); return -ENODEV; } diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index c6852402c5e..210f1240b33 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -974,14 +974,14 @@ dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn) for (i = reg1; i <= regn; i++) { rc = i2c_r(ov, i); - info("Sensor[0x%02X] = 0x%02X", i, rc); + dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc); } } static void dump_i2c_regs(struct usb_ov511 *ov) { - info("I2C REGS"); + dev_info(&ov->dev->dev, "I2C REGS\n"); dump_i2c_range(ov, 0x00, 0x7C); } @@ -992,28 +992,28 @@ dump_reg_range(struct usb_ov511 *ov, int reg1, int regn) for (i = reg1; i <= regn; i++) { rc = reg_r(ov, i); - info("OV511[0x%02X] = 0x%02X", i, rc); + dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc); } } static void ov511_dump_regs(struct usb_ov511 *ov) { - info("CAMERA INTERFACE REGS"); + dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n"); dump_reg_range(ov, 0x10, 0x1f); - info("DRAM INTERFACE REGS"); + dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n"); dump_reg_range(ov, 0x20, 0x23); - info("ISO FIFO REGS"); + dev_info(&ov->dev->dev, "ISO FIFO REGS\n"); dump_reg_range(ov, 0x30, 0x31); - info("PIO REGS"); + dev_info(&ov->dev->dev, "PIO REGS\n"); dump_reg_range(ov, 0x38, 0x39); dump_reg_range(ov, 0x3e, 0x3e); - info("I2C REGS"); + dev_info(&ov->dev->dev, "I2C REGS\n"); dump_reg_range(ov, 0x40, 0x49); - info("SYSTEM CONTROL REGS"); + dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n"); dump_reg_range(ov, 0x50, 0x55); dump_reg_range(ov, 0x5e, 0x5f); - info("OmniCE REGS"); + dev_info(&ov->dev->dev, "OmniCE REGS\n"); dump_reg_range(ov, 0x70, 0x79); /* NOTE: Quantization tables are not readable. You will get the value * in reg. 0x79 for every table register */ @@ -1025,25 +1025,25 @@ ov511_dump_regs(struct usb_ov511 *ov) static void ov518_dump_regs(struct usb_ov511 *ov) { - info("VIDEO MODE REGS"); + dev_info(&ov->dev->dev, "VIDEO MODE REGS\n"); dump_reg_range(ov, 0x20, 0x2f); - info("DATA PUMP AND SNAPSHOT REGS"); + dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n"); dump_reg_range(ov, 0x30, 0x3f); - info("I2C REGS"); + dev_info(&ov->dev->dev, "I2C REGS\n"); dump_reg_range(ov, 0x40, 0x4f); - info("SYSTEM CONTROL AND VENDOR REGS"); + dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n"); dump_reg_range(ov, 0x50, 0x5f); - info("60 - 6F"); + dev_info(&ov->dev->dev, "60 - 6F\n"); dump_reg_range(ov, 0x60, 0x6f); - info("70 - 7F"); + dev_info(&ov->dev->dev, "70 - 7F\n"); dump_reg_range(ov, 0x70, 0x7f); - info("Y QUANTIZATION TABLE"); + dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n"); dump_reg_range(ov, 0x80, 0x8f); - info("UV QUANTIZATION TABLE"); + dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n"); dump_reg_range(ov, 0x90, 0x9f); - info("A0 - BF"); + dev_info(&ov->dev->dev, "A0 - BF\n"); dump_reg_range(ov, 0xa0, 0xbf); - info("CBR"); + dev_info(&ov->dev->dev, "CBR\n"); dump_reg_range(ov, 0xc0, 0xcf); } #endif @@ -1098,9 +1098,10 @@ ov51x_clear_snapshot(struct usb_ov511 *ov) reg_w(ov, R51x_SYS_SNAP, 0x02); reg_w(ov, R51x_SYS_SNAP, 0x00); } else if (ov->bclass == BCL_OV518) { - warn("snapshot reset not supported yet on OV518(+)"); + dev_warn(&ov->dev->dev, + "snapshot reset not supported yet on OV518(+)\n"); } else { - err("clear snap: invalid bridge type"); + dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n"); } } @@ -1115,14 +1116,16 @@ ov51x_check_snapshot(struct usb_ov511 *ov) if (ov->bclass == BCL_OV511) { ret = reg_r(ov, R51x_SYS_SNAP); if (ret < 0) { - err("Error checking snspshot status (%d)", ret); + dev_err(&ov->dev->dev, + "Error checking snspshot status (%d)\n", ret); } else if (ret & 0x08) { status = 1; } } else if (ov->bclass == BCL_OV518) { - warn("snapshot check not supported yet on OV518(+)"); + dev_warn(&ov->dev->dev, + "snapshot check not supported yet on OV518(+)\n"); } else { - err("check snap: invalid bridge type"); + dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n"); } return status; @@ -3205,9 +3208,10 @@ ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n) */ if (printph) { - info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x", - pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], - in[7], in[8], in[9], in[10], in[11]); + dev_info(&ov->dev->dev, + "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n", + pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], + in[7], in[8], in[9], in[10], in[11]); } /* Check for SOF/EOF packet */ @@ -3366,8 +3370,10 @@ ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n) * the definitive SOF/EOF format */ if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) { if (printph) { - info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0], - in[1], in[2], in[3], in[4], in[5], in[6], in[7]); + dev_info(&ov->dev->dev, + "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n", + in[0], in[1], in[2], in[3], in[4], in[5], + in[6], in[7]); } if (frame->scanstate == STATE_LINES) { @@ -3646,14 +3652,16 @@ ov51x_init_isoc(struct usb_ov511 *ov) if (packetsize == -1) { ov518_set_packet_size(ov, 640); } else { - info("Forcing packet size to %d", packetsize); + dev_info(&ov->dev->dev, "Forcing packet size to %d\n", + packetsize); ov518_set_packet_size(ov, packetsize); } } else { if (packetsize == -1) { ov511_set_packet_size(ov, size); } else { - info("Forcing packet size to %d", packetsize); + dev_info(&ov->dev->dev, "Forcing packet size to %d\n", + packetsize); ov511_set_packet_size(ov, packetsize); } } @@ -4121,7 +4129,7 @@ ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file, return -EIO; if (force_palette && p->palette != force_palette) { - info("Palette rejected (%s)", + dev_info(&ov->dev->dev, "Palette rejected (%s)\n", symbolic(v4l1_plist, p->palette)); return -EINVAL; } @@ -4849,26 +4857,27 @@ ov7xx0_configure(struct usb_ov511 *ov) err("Error detecting sensor type"); return -1; } else if ((rc & 3) == 3) { - info("Sensor is an OV7610"); + dev_info(&ov->dev->dev, "Sensor is an OV7610\n"); ov->sensor = SEN_OV7610; } else if ((rc & 3) == 1) { /* I don't know what's different about the 76BE yet. */ if (i2c_r(ov, 0x15) & 1) - info("Sensor is an OV7620AE"); + dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n"); else - info("Sensor is an OV76BE"); + dev_info(&ov->dev->dev, "Sensor is an OV76BE\n"); /* OV511+ will return all zero isoc data unless we * configure the sensor as a 7620. Someone needs to * find the exact reg. setting that causes this. */ if (ov->bridge == BRG_OV511PLUS) { - info("Enabling 511+/7620AE workaround"); + dev_info(&ov->dev->dev, + "Enabling 511+/7620AE workaround\n"); ov->sensor = SEN_OV7620; } else { ov->sensor = SEN_OV76BE; } } else if ((rc & 3) == 0) { - info("Sensor is an OV7620"); + dev_info(&ov->dev->dev, "Sensor is an OV7620\n"); ov->sensor = SEN_OV7620; } else { err("Unknown image sensor version: %d", rc & 3); @@ -5024,16 +5033,16 @@ ov6xx0_configure(struct usb_ov511 *ov) if ((rc & 3) == 0) { ov->sensor = SEN_OV6630; - info("Sensor is an OV6630"); + dev_info(&ov->dev->dev, "Sensor is an OV6630\n"); } else if ((rc & 3) == 1) { ov->sensor = SEN_OV6620; - info("Sensor is an OV6620"); + dev_info(&ov->dev->dev, "Sensor is an OV6620\n"); } else if ((rc & 3) == 2) { ov->sensor = SEN_OV6630; - info("Sensor is an OV6630AE"); + dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n"); } else if ((rc & 3) == 3) { ov->sensor = SEN_OV6630; - info("Sensor is an OV6630AF"); + dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n"); } /* Set sensor-specific vars */ @@ -5088,10 +5097,10 @@ ks0127_configure(struct usb_ov511 *ov) err("Error detecting sensor type"); return -1; } else if ((rc & 0x0f) == 0) { - info("Sensor is a KS0127"); + dev_info(&ov->dev->dev, "Sensor is a KS0127\n"); ov->sensor = SEN_KS0127; } else if ((rc & 0x0f) == 9) { - info("Sensor is a KS0127B Rev. A"); + dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n"); ov->sensor = SEN_KS0127B; } } else { @@ -5200,7 +5209,8 @@ saa7111a_configure(struct usb_ov511 *ov) err("Error detecting sensor version"); return -1; } else { - info("Sensor is an SAA7111A (version 0x%x)", rc); + dev_info(&ov->dev->dev, + "Sensor is an SAA7111A (version 0x%x)\n", rc); ov->sensor = SEN_SAA7111A; } @@ -5210,7 +5220,8 @@ saa7111a_configure(struct usb_ov511 *ov) if (ov->bclass == BCL_OV511) reg_w(ov, 0x11, 0x00); else - warn("SAA7111A not yet supported with OV518/OV518+"); + dev_warn(&ov->dev->dev, + "SAA7111A not yet supported with OV518/OV518+\n"); return 0; } @@ -5262,7 +5273,7 @@ ov511_configure(struct usb_ov511 *ov) PDEBUG (1, "CustomID = %d", ov->customid); ov->desc = symbolic(camlist, ov->customid); - info("model: %s", ov->desc); + dev_info(&ov->dev->dev, "model: %s\n", ov->desc); if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) { err("Camera type (%d) not recognized", ov->customid); @@ -5426,7 +5437,8 @@ ov518_configure(struct usb_ov511 *ov) PDEBUG(4, ""); /* First 5 bits of custom ID reg are a revision ID on OV518 */ - info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID)); + dev_info(&ov->dev->dev, "Device revision %d\n", + 0x1F & reg_r(ov, R511_SYS_CUST_ID)); /* Give it the default description */ ov->desc = symbolic(camlist, 0); @@ -5448,7 +5460,8 @@ ov518_configure(struct usb_ov511 *ov) * required. OV518 has no uncompressed mode, to save RAM. */ if (!dumppix && !ov->compress) { ov->compress = 1; - warn("Compression required with OV518...enabling"); + dev_warn(&ov->dev->dev, + "Compression required with OV518...enabling\n"); } if (ov->bridge == BRG_OV518) { @@ -5773,7 +5786,8 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) goto error; } - info("USB %s video device found", symbolic(brglist, ov->bridge)); + dev_info(&intf->dev, "USB %s video device found\n", + symbolic(brglist, ov->bridge)); init_waitqueue_head(&ov->wq); @@ -5854,8 +5868,8 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) goto error; } - info("Device at %s registered to minor %d", ov->usb_path, - ov->vdev->minor); + dev_info(&intf->dev, "Device at %s registered to minor %d\n", + ov->usb_path, ov->vdev->minor); usb_set_intfdata(intf, ov); if (ov_create_sysfs(ov->vdev)) { @@ -5958,7 +5972,8 @@ usb_ov511_init(void) if (retval) goto out; - info(DRIVER_VERSION " : " DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); out: return retval; @@ -5968,8 +5983,7 @@ static void __exit usb_ov511_exit(void) { usb_deregister(&ov511_driver); - info("driver deregistered"); - + printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n"); } module_init(usb_ov511_init); diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h index baded1262ca..70d99e52329 100644 --- a/drivers/media/video/ov511.h +++ b/drivers/media/video/ov511.h @@ -12,7 +12,8 @@ #ifdef OV511_DEBUG #define PDEBUG(level, fmt, args...) \ - if (debug >= (level)) info("[%s:%d] " fmt, \ + if (debug >= (level)) \ + printk(KERN_INFO KBUILD_MODNAME "[%s:%d] \n" fmt, \ __func__, __LINE__ , ## args) #else #define PDEBUG(level, fmt, args...) do {} while(0) diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c index 065c2454113..2c4acbf5a4f 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_core.c +++ b/drivers/media/video/ovcamchip/ovcamchip_core.c @@ -49,12 +49,6 @@ MODULE_LICENSE("GPL"); #define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */ #define GENERIC_REG_COM_I 0x29 /* misc ID bits */ -extern struct ovcamchip_ops ov6x20_ops; -extern struct ovcamchip_ops ov6x30_ops; -extern struct ovcamchip_ops ov7x10_ops; -extern struct ovcamchip_ops ov7x20_ops; -extern struct ovcamchip_ops ov76be_ops; - static char *chip_names[NUM_CC_TYPES] = { [CC_UNKNOWN] = "Unknown chip", [CC_OV76BE] = "OV76BE", diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h index 9afa4fe4772..a05650faedd 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_priv.h +++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h @@ -53,6 +53,12 @@ struct ovcamchip { int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */ }; +extern struct ovcamchip_ops ov6x20_ops; +extern struct ovcamchip_ops ov6x30_ops; +extern struct ovcamchip_ops ov7x10_ops; +extern struct ovcamchip_ops ov7x20_ops; +extern struct ovcamchip_ops ov76be_ops; + /* --------------------------------- */ /* I2C I/O */ /* --------------------------------- */ diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index 7c84f795db5..994807818aa 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -47,6 +47,7 @@ struct pms_device struct video_picture picture; int height; int width; + unsigned long in_use; struct mutex lock; }; @@ -881,10 +882,27 @@ static ssize_t pms_read(struct file *file, char __user *buf, return len; } +static int pms_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *v = video_devdata(file); + struct pms_device *pd = (struct pms_device *)v; + + return test_and_set_bit(0, &pd->in_use) ? -EBUSY : 0; +} + +static int pms_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *v = video_devdata(file); + struct pms_device *pd = (struct pms_device *)v; + + clear_bit(0, &pd->in_use); + return 0; +} + static const struct file_operations pms_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = pms_exclusive_open, + .release = pms_exclusive_release, .ioctl = pms_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -897,6 +915,7 @@ static struct video_device pms_template= { .name = "Mediavision PMS", .fops = &pms_fops, + .release = video_device_release_empty, }; static struct pms_device pms_device; diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c index 0764fbfffb7..203f54cd18a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c @@ -134,13 +134,17 @@ int pvr2_ctrl_get_min(struct pvr2_ctrl *cptr) /* Retrieve control's default value (any type) */ -int pvr2_ctrl_get_def(struct pvr2_ctrl *cptr) +int pvr2_ctrl_get_def(struct pvr2_ctrl *cptr, int *valptr) { int ret = 0; if (!cptr) return 0; LOCK_TAKE(cptr->hdw->big_lock); do { if (cptr->info->type == pvr2_ctl_int) { - ret = cptr->info->default_value; + if (cptr->info->get_def_value) { + ret = cptr->info->get_def_value(cptr, valptr); + } else { + *valptr = cptr->info->default_value; + } } } while(0); LOCK_GIVE(cptr->hdw->big_lock); return ret; diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.h b/drivers/media/video/pvrusb2/pvrusb2-ctrl.h index 0371ae6e6e4..794ff90121c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.h +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.h @@ -49,7 +49,7 @@ int pvr2_ctrl_get_max(struct pvr2_ctrl *); int pvr2_ctrl_get_min(struct pvr2_ctrl *); /* Retrieve control's default value (any type) */ -int pvr2_ctrl_get_def(struct pvr2_ctrl *); +int pvr2_ctrl_get_def(struct pvr2_ctrl *, int *valptr); /* Retrieve control's enumeration count (enum only) */ int pvr2_ctrl_get_cnt(struct pvr2_ctrl *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 657f861593b..de7ee7264be 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -82,6 +82,7 @@ struct pvr2_ctl_info { /* Control's implementation */ pvr2_ctlf_get_value get_value; /* Get its value */ + pvr2_ctlf_get_value get_def_value; /* Get its default value */ pvr2_ctlf_get_value get_min_value; /* Get minimum allowed value */ pvr2_ctlf_get_value get_max_value; /* Get maximum allowed value */ pvr2_ctlf_set_value set_value; /* Set its value */ @@ -307,6 +308,10 @@ struct pvr2_hdw { struct v4l2_tuner tuner_signal_info; int tuner_signal_stale; + /* Cropping capability info */ + struct v4l2_cropcap cropcap_info; + int cropcap_stale; + /* Video standard handling */ v4l2_std_id std_mask_eeprom; // Hardware supported selections v4l2_std_id std_mask_avail; // Which standards we may select from @@ -367,6 +372,10 @@ struct pvr2_hdw { VCREATE_DATA(bass); VCREATE_DATA(treble); VCREATE_DATA(mute); + VCREATE_DATA(cropl); + VCREATE_DATA(cropt); + VCREATE_DATA(cropw); + VCREATE_DATA(croph); VCREATE_DATA(input); VCREATE_DATA(audiomode); VCREATE_DATA(res_hor); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index f051c6aa7f1..94265bd3d92 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -298,6 +298,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, unsigned int timeout,int probe_fl, void *write_data,unsigned int write_len, void *read_data,unsigned int read_len); +static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw); static void trace_stbit(const char *name,int val) @@ -402,6 +403,194 @@ static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) return 0; } +static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *left = cap->bounds.left; + return 0; +} + +static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *left = cap->bounds.left; + if (cap->bounds.width > cptr->hdw->cropw_val) { + *left += cap->bounds.width - cptr->hdw->cropw_val; + } + return 0; +} + +static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *top = cap->bounds.top; + return 0; +} + +static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *top = cap->bounds.top; + if (cap->bounds.height > cptr->hdw->croph_val) { + *top += cap->bounds.height - cptr->hdw->croph_val; + } + return 0; +} + +static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = 0; + if (cap->bounds.width > cptr->hdw->cropl_val) { + *val = cap->bounds.width - cptr->hdw->cropl_val; + } + return 0; +} + +static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = 0; + if (cap->bounds.height > cptr->hdw->cropt_val) { + *val = cap->bounds.height - cptr->hdw->cropt_val; + } + return 0; +} + +static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.left; + return 0; +} + +static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.top; + return 0; +} + +static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.width; + return 0; +} + +static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->bounds.height; + return 0; +} + +static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.left; + return 0; +} + +static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.top; + return 0; +} + +static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.width; + return 0; +} + +static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->defrect.height; + return 0; +} + +static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->pixelaspect.numerator; + return 0; +} + +static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + return stat; + } + *val = cap->pixelaspect.denominator; + return 0; +} + static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) { /* Actual maximum depends on the video standard in effect. */ @@ -779,6 +968,10 @@ VCREATE_FUNCS(balance) VCREATE_FUNCS(bass) VCREATE_FUNCS(treble) VCREATE_FUNCS(mute) +VCREATE_FUNCS(cropl) +VCREATE_FUNCS(cropt) +VCREATE_FUNCS(cropw) +VCREATE_FUNCS(croph) VCREATE_FUNCS(audiomode) VCREATE_FUNCS(res_hor) VCREATE_FUNCS(res_ver) @@ -849,6 +1042,72 @@ static const struct pvr2_ctl_info control_defs[] = { .default_value = 0, DEFREF(mute), DEFBOOL, + }, { + .desc = "Capture crop left margin", + .name = "crop_left", + .internal_id = PVR2_CID_CROPL, + .default_value = 0, + DEFREF(cropl), + DEFINT(-129, 340), + .get_min_value = ctrl_cropl_min_get, + .get_max_value = ctrl_cropl_max_get, + .get_def_value = ctrl_get_cropcapdl, + }, { + .desc = "Capture crop top margin", + .name = "crop_top", + .internal_id = PVR2_CID_CROPT, + .default_value = 0, + DEFREF(cropt), + DEFINT(-35, 544), + .get_min_value = ctrl_cropt_min_get, + .get_max_value = ctrl_cropt_max_get, + .get_def_value = ctrl_get_cropcapdt, + }, { + .desc = "Capture crop width", + .name = "crop_width", + .internal_id = PVR2_CID_CROPW, + .default_value = 720, + DEFREF(cropw), + .get_max_value = ctrl_cropw_max_get, + .get_def_value = ctrl_get_cropcapdw, + }, { + .desc = "Capture crop height", + .name = "crop_height", + .internal_id = PVR2_CID_CROPH, + .default_value = 480, + DEFREF(croph), + .get_max_value = ctrl_croph_max_get, + .get_def_value = ctrl_get_cropcapdh, + }, { + .desc = "Capture capability pixel aspect numerator", + .name = "cropcap_pixel_numerator", + .internal_id = PVR2_CID_CROPCAPPAN, + .get_value = ctrl_get_cropcappan, + }, { + .desc = "Capture capability pixel aspect denominator", + .name = "cropcap_pixel_denominator", + .internal_id = PVR2_CID_CROPCAPPAD, + .get_value = ctrl_get_cropcappad, + }, { + .desc = "Capture capability bounds top", + .name = "cropcap_bounds_top", + .internal_id = PVR2_CID_CROPCAPBT, + .get_value = ctrl_get_cropcapbt, + }, { + .desc = "Capture capability bounds left", + .name = "cropcap_bounds_left", + .internal_id = PVR2_CID_CROPCAPBL, + .get_value = ctrl_get_cropcapbl, + }, { + .desc = "Capture capability bounds width", + .name = "cropcap_bounds_width", + .internal_id = PVR2_CID_CROPCAPBW, + .get_value = ctrl_get_cropcapbw, + }, { + .desc = "Capture capability bounds height", + .name = "cropcap_bounds_height", + .internal_id = PVR2_CID_CROPCAPBH, + .get_value = ctrl_get_cropcapbh, },{ .desc = "Video Source", .name = "input", @@ -1313,9 +1572,19 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE; memcpy(fw_ptr, fw_entry->data + fw_done, bcnt); /* Usbsnoop log shows that we must swap bytes... */ + /* Some background info: The data being swapped here is a + firmware image destined for the mpeg encoder chip that + lives at the other end of a USB endpoint. The encoder + chip always talks in 32 bit chunks and its storage is + organized into 32 bit words. However from the file + system to the encoder chip everything is purely a byte + stream. The firmware file's contents are always 32 bit + swapped from what the encoder expects. Thus the need + always exists to swap the bytes regardless of the endian + type of the host processor and therefore swab32() makes + the most sense. */ for (icnt = 0; icnt < bcnt/4 ; icnt++) - ((u32 *)fw_ptr)[icnt] = - ___swab32(((u32 *)fw_ptr)[icnt]); + ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]); ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt, &actual_length, HZ); @@ -1905,7 +2174,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, const struct usb_device_id *devid) { unsigned int idx,cnt1,cnt2,m; - struct pvr2_hdw *hdw; + struct pvr2_hdw *hdw = NULL; int valid_std_mask; struct pvr2_ctrl *cptr; const struct pvr2_device_desc *hdw_desc; @@ -1915,6 +2184,16 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info); + if (hdw_desc == NULL) { + pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:" + " No device description pointer," + " unable to continue."); + pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type," + " please contact Mike Isely <isely@pobox.com>" + " to get it included in the driver\n"); + goto fail; + } + hdw = kzalloc(sizeof(*hdw),GFP_KERNEL); pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", hdw,hdw_desc->description); @@ -2072,6 +2351,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, valid_std_mask; } + hdw->cropcap_stale = !0; hdw->eeprom_addr = -1; hdw->unit_number = -1; hdw->v4l_minor_number_video = -1; @@ -2508,6 +2788,28 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) /* Can't commit anything until pathway is ok. */ return 0; } + /* The broadcast decoder can only scale down, so if + * res_*_dirty && crop window < output format ==> enlarge crop. + * + * The mpeg encoder receives fields of res_hor_val dots and + * res_ver_val halflines. Limits: hor<=720, ver<=576. + */ + if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) { + hdw->cropw_val = hdw->res_hor_val; + hdw->cropw_dirty = !0; + } else if (hdw->cropw_dirty) { + hdw->res_hor_dirty = !0; /* must rescale */ + hdw->res_hor_val = min(720, hdw->cropw_val); + } + if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) { + hdw->croph_val = hdw->res_ver_val; + hdw->croph_dirty = !0; + } else if (hdw->croph_dirty) { + int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576; + hdw->res_ver_dirty = !0; + hdw->res_ver_val = min(nvres, hdw->croph_val); + } + /* If any of the below has changed, then we can't do the update while the pipeline is running. Pipeline must be paused first and decoder -> encoder connection be made quiescent before we @@ -2518,6 +2820,8 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) hdw->srate_dirty || hdw->res_ver_dirty || hdw->res_hor_dirty || + hdw->cropw_dirty || + hdw->croph_dirty || hdw->input_dirty || (hdw->active_stream_type != hdw->desired_stream_type)); if (disruptive_change && !hdw->state_pipeline_idle) { @@ -2587,6 +2891,9 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) } hdw->state_pipeline_config = !0; + /* Hardware state may have changed in a way to cause the cropping + capabilities to have changed. So mark it stale, which will + cause a later re-fetch. */ trace_stbit("state_pipeline_config",hdw->state_pipeline_config); return !0; } @@ -2677,6 +2984,33 @@ void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw) } +static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw) +{ + if (!hdw->cropcap_stale) { + return 0; + } + pvr2_i2c_core_status_poll(hdw); + if (hdw->cropcap_stale) { + return -EIO; + } + return 0; +} + + +/* Return information about cropping capabilities */ +int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp) +{ + int stat = 0; + LOCK_TAKE(hdw->big_lock); + stat = pvr2_hdw_check_cropcap(hdw); + if (!stat) { + memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info)); + } + LOCK_GIVE(hdw->big_lock); + return stat; +} + + /* Return information about the tuner */ int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index c04956d304a..49482d1f2b2 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -36,6 +36,16 @@ #define PVR2_CID_FREQUENCY 6 #define PVR2_CID_HRES 7 #define PVR2_CID_VRES 8 +#define PVR2_CID_CROPL 9 +#define PVR2_CID_CROPT 10 +#define PVR2_CID_CROPW 11 +#define PVR2_CID_CROPH 12 +#define PVR2_CID_CROPCAPPAN 13 +#define PVR2_CID_CROPCAPPAD 14 +#define PVR2_CID_CROPCAPBL 15 +#define PVR2_CID_CROPCAPBT 16 +#define PVR2_CID_CROPCAPBW 17 +#define PVR2_CID_CROPCAPBH 18 /* Legal values for the INPUT state variable */ #define PVR2_CVAL_INPUT_TV 0 @@ -170,6 +180,9 @@ void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *); /* Return information about the tuner */ int pvr2_hdw_get_tuner_status(struct pvr2_hdw *,struct v4l2_tuner *); +/* Return information about cropping capabilities */ +int pvr2_hdw_get_cropcap(struct pvr2_hdw *, struct v4l2_cropcap *); + /* Query device and see if it thinks it is on a high-speed USB link */ int pvr2_hdw_is_hsm(struct pvr2_hdw *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c index ccdb429fc7a..94a47718e88 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c @@ -37,8 +37,9 @@ #define OP_VOLUME 3 #define OP_FREQ 4 #define OP_AUDIORATE 5 -#define OP_SIZE 6 -#define OP_LOG 7 +#define OP_CROP 6 +#define OP_SIZE 7 +#define OP_LOG 8 static const struct pvr2_i2c_op * const ops[] = { [OP_STANDARD] = &pvr2_i2c_op_v4l2_standard, @@ -46,6 +47,7 @@ static const struct pvr2_i2c_op * const ops[] = { [OP_BCSH] = &pvr2_i2c_op_v4l2_bcsh, [OP_VOLUME] = &pvr2_i2c_op_v4l2_volume, [OP_FREQ] = &pvr2_i2c_op_v4l2_frequency, + [OP_CROP] = &pvr2_i2c_op_v4l2_crop, [OP_SIZE] = &pvr2_i2c_op_v4l2_size, [OP_LOG] = &pvr2_i2c_op_v4l2_log, }; @@ -59,6 +61,7 @@ void pvr2_i2c_probe(struct pvr2_hdw *hdw,struct pvr2_i2c_client *cp) (1 << OP_BCSH) | (1 << OP_VOLUME) | (1 << OP_FREQ) | + (1 << OP_CROP) | (1 << OP_SIZE) | (1 << OP_LOG)); cp->status_poll = pvr2_v4l2_cmd_status_poll; diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c index 55f04a0b204..16bb11902a5 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c @@ -37,6 +37,7 @@ static void set_standard(struct pvr2_hdw *hdw) pvr2_i2c_core_cmd(hdw,VIDIOC_S_STD,&vs); } hdw->tuner_signal_stale = !0; + hdw->cropcap_stale = !0; } @@ -233,6 +234,37 @@ const struct pvr2_i2c_op pvr2_i2c_op_v4l2_size = { }; +static void set_crop(struct pvr2_hdw *hdw) +{ + struct v4l2_crop crop; + + memset(&crop, 0, sizeof crop); + crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop.c.left = hdw->cropl_val; + crop.c.top = hdw->cropt_val; + crop.c.height = hdw->croph_val; + crop.c.width = hdw->cropw_val; + + pvr2_trace(PVR2_TRACE_CHIPS, + "i2c v4l2 set_crop crop=%d:%d:%d:%d", + crop.c.width, crop.c.height, crop.c.left, crop.c.top); + + pvr2_i2c_core_cmd(hdw, VIDIOC_S_CROP, &crop); +} + +static int check_crop(struct pvr2_hdw *hdw) +{ + return (hdw->cropl_dirty || hdw->cropt_dirty || + hdw->cropw_dirty || hdw->croph_dirty); +} + +const struct pvr2_i2c_op pvr2_i2c_op_v4l2_crop = { + .check = check_crop, + .update = set_crop, + .name = "v4l2_crop", +}; + + static void do_log(struct pvr2_hdw *hdw) { pvr2_trace(PVR2_TRACE_CHIPS,"i2c v4l2 do_log()"); @@ -263,7 +295,19 @@ void pvr2_v4l2_cmd_stream(struct pvr2_i2c_client *cp,int fl) void pvr2_v4l2_cmd_status_poll(struct pvr2_i2c_client *cp) { - pvr2_i2c_client_cmd(cp,VIDIOC_G_TUNER,&cp->hdw->tuner_signal_info); + int stat; + struct pvr2_hdw *hdw = cp->hdw; + if (hdw->cropcap_stale) { + hdw->cropcap_info.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + stat = pvr2_i2c_client_cmd(cp, VIDIOC_CROPCAP, + &hdw->cropcap_info); + if (stat == 0) { + /* Check was successful, so the data is no + longer considered stale. */ + hdw->cropcap_stale = 0; + } + } + pvr2_i2c_client_cmd(cp, VIDIOC_G_TUNER, &hdw->tuner_signal_info); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h index 7fa38683b3b..eb744a20610 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h @@ -29,6 +29,7 @@ extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_radio; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_bcsh; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_volume; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_frequency; +extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_crop; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_size; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_audiomode; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_log; diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index e600576a6c4..d6a35401fef 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -827,7 +827,7 @@ static unsigned int pvr2_i2c_client_describe(struct pvr2_i2c_client *cp, if ((detail & PVR2_I2C_DETAIL_CTLMASK) && cp->ctl_mask) { unsigned int idx; unsigned long msk,sm; - int spcfl; + bcnt = scnprintf(buf,maxlen," ["); ccnt += bcnt; buf += bcnt; maxlen -= bcnt; sm = 0; @@ -891,6 +891,7 @@ static int pvr2_i2c_attach_inform(struct i2c_client *client) INIT_LIST_HEAD(&cp->list); cp->client = client; mutex_lock(&hdw->i2c_list_lock); do { + hdw->cropcap_stale = !0; list_add_tail(&cp->list,&hdw->i2c_clients); hdw->i2c_pend_types |= PVR2_I2C_PEND_DETECT; } while (0); mutex_unlock(&hdw->i2c_list_lock); @@ -905,6 +906,7 @@ static int pvr2_i2c_detach_inform(struct i2c_client *client) unsigned long amask = 0; int foundfl = 0; mutex_lock(&hdw->i2c_list_lock); do { + hdw->cropcap_stale = !0; list_for_each_entry_safe(cp, ncp, &hdw->i2c_clients, list) { if (cp->client == client) { trace_i2c("pvr2_i2c_detach" @@ -946,22 +948,32 @@ static struct i2c_adapter pvr2_i2c_adap_template = { .client_unregister = pvr2_i2c_detach_inform, }; -static void do_i2c_scan(struct pvr2_hdw *hdw) + +/* Return true if device exists at given address */ +static int do_i2c_probe(struct pvr2_hdw *hdw, int addr) { struct i2c_msg msg[1]; - int i,rc; + int rc; msg[0].addr = 0; msg[0].flags = I2C_M_RD; msg[0].len = 0; msg[0].buf = NULL; - printk("%s: i2c scan beginning\n",hdw->name); + msg[0].addr = addr; + rc = i2c_transfer(&hdw->i2c_adap, msg, ARRAY_SIZE(msg)); + return rc == 1; +} + +static void do_i2c_scan(struct pvr2_hdw *hdw) +{ + int i; + printk(KERN_INFO "%s: i2c scan beginning\n", hdw->name); for (i = 0; i < 128; i++) { - msg[0].addr = i; - rc = i2c_transfer(&hdw->i2c_adap,msg, ARRAY_SIZE(msg)); - if (rc != 1) continue; - printk("%s: i2c scan: found device @ 0x%x\n",hdw->name,i); + if (do_i2c_probe(hdw, i)) { + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x\n", + hdw->name, i); + } } - printk("%s: i2c scan done.\n",hdw->name); + printk(KERN_INFO "%s: i2c scan done.\n", hdw->name); } void pvr2_i2c_core_init(struct pvr2_hdw *hdw) @@ -980,8 +992,6 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) hdw->i2c_func[0x18] = i2c_black_hole; } else if (ir_mode[hdw->unit_number] == 1) { if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) { - /* This comment is present PURELY to get - checkpatch.pl to STFU. Lovely, eh? */ hdw->i2c_func[0x18] = i2c_24xxx_ir; } } @@ -1006,6 +1016,16 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) mutex_init(&hdw->i2c_list_lock); hdw->i2c_linked = !0; i2c_add_adapter(&hdw->i2c_adap); + if (hdw->i2c_func[0x18] == i2c_24xxx_ir) { + /* Probe for a different type of IR receiver on this + device. If present, disable the emulated IR receiver. */ + if (do_i2c_probe(hdw, 0x71)) { + pvr2_trace(PVR2_TRACE_INFO, + "Device has newer IR hardware;" + " disabling unneeded virtual IR device"); + hdw->i2c_func[0x18] = NULL; + } + } if (i2c_scan) do_i2c_scan(hdw); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index ad0d98c2ebb..9b3c874d96d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -137,9 +137,11 @@ static int __init pvr_init(void) ret = usb_register(&pvr_driver); if (ret == 0) - info(DRIVER_DESC " : " DRIVER_VERSION); - if (pvrusb2_debug) info("Debug mask is %d (0x%x)", - pvrusb2_debug,pvrusb2_debug); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + if (pvrusb2_debug) + printk(KERN_INFO KBUILD_MODNAME ": Debug mask is %d (0x%x)\n", + pvrusb2_debug,pvrusb2_debug); pvr2_trace(PVR2_TRACE_INIT,"pvr_init complete"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 46a8c39ba03..733680f2131 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -65,6 +65,7 @@ struct pvr2_sysfs_ctl_item { struct device_attribute attr_type; struct device_attribute attr_min; struct device_attribute attr_max; + struct device_attribute attr_def; struct device_attribute attr_enum; struct device_attribute attr_bits; struct device_attribute attr_val; @@ -145,6 +146,23 @@ static ssize_t show_max(struct device *class_dev, return scnprintf(buf, PAGE_SIZE, "%ld\n", val); } +static ssize_t show_def(struct device *class_dev, + struct device_attribute *attr, + char *buf) +{ + struct pvr2_sysfs_ctl_item *cip; + int val; + int ret; + cip = container_of(attr, struct pvr2_sysfs_ctl_item, attr_def); + ret = pvr2_ctrl_get_def(cip->cptr, &val); + pvr2_sysfs_trace("pvr2_sysfs(%p) show_def(cid=%d) is %d, stat=%d", + cip->chptr, cip->ctl_id, val, ret); + if (ret < 0) { + return ret; + } + return scnprintf(buf, PAGE_SIZE, "%d\n", val); +} + static ssize_t show_val_norm(struct device *class_dev, struct device_attribute *attr, char *buf) @@ -320,6 +338,10 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) cip->attr_max.attr.mode = S_IRUGO; cip->attr_max.show = show_max; + cip->attr_def.attr.name = "def_val"; + cip->attr_def.attr.mode = S_IRUGO; + cip->attr_def.show = show_def; + cip->attr_val.attr.name = "cur_val"; cip->attr_val.attr.mode = S_IRUGO; @@ -343,6 +365,7 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) cip->attr_gen[acnt++] = &cip->attr_name.attr; cip->attr_gen[acnt++] = &cip->attr_type.attr; cip->attr_gen[acnt++] = &cip->attr_val.attr; + cip->attr_gen[acnt++] = &cip->attr_def.attr; cip->attr_val.show = show_val_norm; cip->attr_val.store = store_val_norm; if (pvr2_ctrl_has_custom_symbols(cptr)) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 00306faeac0..f048d80b77e 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -533,7 +533,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, lmin = pvr2_ctrl_get_min(hcp); lmax = pvr2_ctrl_get_max(hcp); - ldef = pvr2_ctrl_get_def(hcp); + pvr2_ctrl_get_def(hcp, &ldef); if (w == -1) { w = ldef; } else if (w < lmin) { @@ -543,7 +543,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, } lmin = pvr2_ctrl_get_min(vcp); lmax = pvr2_ctrl_get_max(vcp); - ldef = pvr2_ctrl_get_def(vcp); + pvr2_ctrl_get_def(vcp, &ldef); if (h == -1) { h = ldef; } else if (h < lmin) { @@ -604,6 +604,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_QUERYCTRL: { struct pvr2_ctrl *cptr; + int val; struct v4l2_queryctrl *vc = (struct v4l2_queryctrl *)arg; ret = 0; if (vc->id & V4L2_CTRL_FLAG_NEXT_CTRL) { @@ -627,7 +628,8 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, pvr2_ctrl_get_desc(cptr)); strlcpy(vc->name,pvr2_ctrl_get_desc(cptr),sizeof(vc->name)); vc->flags = pvr2_ctrl_get_v4lflags(cptr); - vc->default_value = pvr2_ctrl_get_def(cptr); + pvr2_ctrl_get_def(cptr, &val); + vc->default_value = val; switch (pvr2_ctrl_get_type(cptr)) { case pvr2_ctl_enum: vc->type = V4L2_CTRL_TYPE_MENU; @@ -753,6 +755,92 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, break; } + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *cap = (struct v4l2_cropcap *)arg; + if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret = -EINVAL; + break; + } + ret = pvr2_hdw_get_cropcap(hdw, cap); + cap->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; /* paranoia */ + break; + } + case VIDIOC_G_CROP: + { + struct v4l2_crop *crop = (struct v4l2_crop *)arg; + int val = 0; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPL), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.left = val; + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPT), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.top = val; + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPW), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.width = val; + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPH), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.height = val; + } + case VIDIOC_S_CROP: + { + struct v4l2_crop *crop = (struct v4l2_crop *)arg; + struct v4l2_cropcap cap; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret = -EINVAL; + break; + } + cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPL), + crop->c.left); + if (ret != 0) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPT), + crop->c.top); + if (ret != 0) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPW), + crop->c.width); + if (ret != 0) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPH), + crop->c.height); + if (ret != 0) { + ret = -EINVAL; + break; + } + } case VIDIOC_LOG_STATUS: { pvr2_hdw_trigger_module_log(hdw); diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index dbc56074255..c6653021019 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -41,7 +41,6 @@ #include <asm/uaccess.h> #endif #include <asm/errno.h> -#include <linux/version.h> #include "pwc.h" #include "pwc-uncompress.h" diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 9aee7cb6f79..ab28389b4cd 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1112,7 +1112,7 @@ static int pwc_video_open(struct inode *inode, struct file *file) PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev); - pdev = (struct pwc_device *)vdev->priv; + pdev = video_get_drvdata(vdev); BUG_ON(!pdev); if (pdev->vopen) { PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n"); @@ -1233,7 +1233,7 @@ static int pwc_video_close(struct inode *inode, struct file *file) PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); lock_kernel(); - pdev = (struct pwc_device *)vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev->vopen == 0) PWC_DEBUG_MODULE("video_close() called on closed device?\n"); @@ -1304,7 +1304,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, vdev, buf, count); if (vdev == NULL) return -EFAULT; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev == NULL) return -EFAULT; @@ -1386,7 +1386,7 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait) if (vdev == NULL) return -EFAULT; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev == NULL) return -EFAULT; @@ -1408,7 +1408,7 @@ static int pwc_video_ioctl(struct inode *inode, struct file *file, if (!vdev) goto out; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); mutex_lock(&pdev->modlock); if (!pdev->unplugged) @@ -1428,7 +1428,7 @@ static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) int index; PWC_DEBUG_MEMORY(">> %s\n", __func__); - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); size = vma->vm_end - vma->vm_start; start = vma->vm_start; diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index 1742889874d..76a1376c975 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -346,7 +346,7 @@ int pwc_video_do_ioctl(struct inode *inode, struct file *file, if (vdev == NULL) return -EFAULT; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev == NULL) return -EFAULT; diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 388cf94055d..eb6be580292 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -629,17 +629,6 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev) pdata->init(pcdev->dev); } - if (pdata && pdata->power) { - dev_dbg(pcdev->dev, "%s: Power on camera\n", __func__); - pdata->power(pcdev->dev, 1); - } - - if (pdata && pdata->reset) { - dev_dbg(pcdev->dev, "%s: Releasing camera reset\n", - __func__); - pdata->reset(pcdev->dev, 1); - } - CICR0 = 0x3FF; /* disable all interrupts */ if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) @@ -660,20 +649,7 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev) static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev) { - struct pxacamera_platform_data *board = pcdev->pdata; - clk_disable(pcdev->clk); - - if (board && board->reset) { - dev_dbg(pcdev->dev, "%s: Asserting camera reset\n", - __func__); - board->reset(pcdev->dev, 0); - } - - if (board && board->power) { - dev_dbg(pcdev->dev, "%s: Power off camera\n", __func__); - board->power(pcdev->dev, 0); - } } static irqreturn_t pxa_camera_irq(int irq, void *data) @@ -1025,9 +1001,9 @@ static int pxa_camera_resume(struct soc_camera_device *icd) struct pxa_camera_dev *pcdev = ici->priv; int i = 0, ret = 0; - DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; - DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; - DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD; CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB; CICR1 = pcdev->save_cicr[i++]; @@ -1144,36 +1120,36 @@ static int pxa_camera_probe(struct platform_device *pdev) pcdev->dev = &pdev->dev; /* request dma */ - pcdev->dma_chans[0] = pxa_request_dma("CI_Y", DMA_PRIO_HIGH, - pxa_camera_dma_irq_y, pcdev); - if (pcdev->dma_chans[0] < 0) { + err = pxa_request_dma("CI_Y", DMA_PRIO_HIGH, + pxa_camera_dma_irq_y, pcdev); + if (err < 0) { dev_err(pcdev->dev, "Can't request DMA for Y\n"); - err = -ENOMEM; goto exit_iounmap; } + pcdev->dma_chans[0] = err; dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chans[0]); - pcdev->dma_chans[1] = pxa_request_dma("CI_U", DMA_PRIO_HIGH, - pxa_camera_dma_irq_u, pcdev); - if (pcdev->dma_chans[1] < 0) { + err = pxa_request_dma("CI_U", DMA_PRIO_HIGH, + pxa_camera_dma_irq_u, pcdev); + if (err < 0) { dev_err(pcdev->dev, "Can't request DMA for U\n"); - err = -ENOMEM; goto exit_free_dma_y; } + pcdev->dma_chans[1] = err; dev_dbg(pcdev->dev, "got DMA channel (U) %d\n", pcdev->dma_chans[1]); - pcdev->dma_chans[2] = pxa_request_dma("CI_V", DMA_PRIO_HIGH, - pxa_camera_dma_irq_v, pcdev); - if (pcdev->dma_chans[0] < 0) { + err = pxa_request_dma("CI_V", DMA_PRIO_HIGH, + pxa_camera_dma_irq_v, pcdev); + if (err < 0) { dev_err(pcdev->dev, "Can't request DMA for V\n"); - err = -ENOMEM; goto exit_free_dma_u; } + pcdev->dma_chans[2] = err; dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]); - DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; - DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; - DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD; /* request irq */ err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME, diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 92b83feae36..5272926db73 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -58,6 +58,8 @@ +/* default JPEG quality */ +#define S2255_DEF_JPEG_QUAL 50 /* vendor request in */ #define S2255_VR_IN 0 /* vendor request out */ @@ -67,20 +69,21 @@ /* USB endpoint number for configuring the device */ #define S2255_CONFIG_EP 2 /* maximum time for DSP to start responding after last FW word loaded(ms) */ -#define S2255_DSP_BOOTTIME 400 +#define S2255_DSP_BOOTTIME 800 /* maximum time to wait for firmware to load (ms) */ #define S2255_LOAD_TIMEOUT (5000 + S2255_DSP_BOOTTIME) #define S2255_DEF_BUFS 16 +#define S2255_SETMODE_TIMEOUT 500 #define MAX_CHANNELS 4 -#define FRAME_MARKER 0x2255DA4AL -#define MAX_PIPE_USBBLOCK (40 * 1024) -#define DEFAULT_PIPE_USBBLOCK (16 * 1024) +#define S2255_MARKER_FRAME 0x2255DA4AL +#define S2255_MARKER_RESPONSE 0x2255ACACL +#define S2255_USB_XFER_SIZE (16 * 1024) #define MAX_CHANNELS 4 #define MAX_PIPE_BUFFERS 1 #define SYS_FRAMES 4 /* maximum size is PAL full size plus room for the marker header(s) */ -#define SYS_FRAMES_MAXSIZE (720 * 288 * 2 * 2 + 4096) -#define DEF_USB_BLOCK (4096) +#define SYS_FRAMES_MAXSIZE (720*288*2*2 + 4096) +#define DEF_USB_BLOCK S2255_USB_XFER_SIZE #define LINE_SZ_4CIFS_NTSC 640 #define LINE_SZ_2CIFS_NTSC 640 #define LINE_SZ_1CIFS_NTSC 320 @@ -108,6 +111,9 @@ #define COLOR_YUVPL 1 /* YUV planar */ #define COLOR_YUVPK 2 /* YUV packed */ #define COLOR_Y8 4 /* monochrome */ +#define COLOR_JPG 5 /* JPEG */ +#define MASK_COLOR 0xff +#define MASK_JPG_QUALITY 0xff00 /* frame decimation. Not implemented by V4L yet(experimental in V4L) */ #define FDEC_1 1 /* capture every frame. default */ @@ -148,16 +154,14 @@ struct s2255_mode { u32 restart; /* if DSP requires restart */ }; -/* frame structure */ -#define FRAME_STATE_UNUSED 0 -#define FRAME_STATE_FILLING 1 -#define FRAME_STATE_FULL 2 +#define S2255_READ_IDLE 0 +#define S2255_READ_FRAME 1 +/* frame structure */ struct s2255_framei { unsigned long size; - - unsigned long ulState; /* ulState ==0 unused, 1 being filled, 2 full */ + unsigned long ulState; /* ulState:S2255_READ_IDLE, S2255_READ_FRAME*/ void *lpvbits; /* image data */ unsigned long cur_size; /* current data copied to it */ }; @@ -188,6 +192,10 @@ struct s2255_dmaqueue { #define S2255_FW_FAILED 3 #define S2255_FW_DISCONNECTING 4 +#define S2255_FW_MARKER 0x22552f2f +/* 2255 read states */ +#define S2255_READ_IDLE 0 +#define S2255_READ_FRAME 1 struct s2255_fw { int fw_loaded; int fw_size; @@ -195,7 +203,6 @@ struct s2255_fw { atomic_t fw_state; void *pfw_data; wait_queue_head_t wait_fw; - struct timer_list dsp_wait; const struct firmware *fw; }; @@ -237,15 +244,27 @@ struct s2255_dev { struct s2255_pipeinfo pipes[MAX_PIPE_BUFFERS]; struct s2255_bufferi buffer[MAX_CHANNELS]; struct s2255_mode mode[MAX_CHANNELS]; + /* jpeg compression */ + struct v4l2_jpegcompression jc[MAX_CHANNELS]; const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; int cur_frame[MAX_CHANNELS]; int last_frame[MAX_CHANNELS]; u32 cc; /* current channel */ int b_acquire[MAX_CHANNELS]; + /* allocated image size */ unsigned long req_image_size[MAX_CHANNELS]; + /* received packet size */ + unsigned long pkt_size[MAX_CHANNELS]; int bad_payload[MAX_CHANNELS]; unsigned long frame_count[MAX_CHANNELS]; int frame_ready; + /* if JPEG image */ + int jpg_size[MAX_CHANNELS]; + /* if channel configured to default state */ + int chn_configured[MAX_CHANNELS]; + wait_queue_head_t wait_setmode[MAX_CHANNELS]; + int setmode_ready[MAX_CHANNELS]; + int chn_ready; struct kref kref; spinlock_t slock; }; @@ -306,12 +325,16 @@ static void s2255_stop_readpipe(struct s2255_dev *dev); static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn); static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn); static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, - int chn); + int chn, int jpgsize); static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, struct s2255_mode *mode); static int s2255_board_shutdown(struct s2255_dev *dev); static void s2255_exit_v4l(struct s2255_dev *dev); -static void s2255_fwload_start(struct s2255_dev *dev); +static void s2255_fwload_start(struct s2255_dev *dev, int reset); +static void s2255_destroy(struct kref *kref); +static long s2255_vendor_req(struct s2255_dev *dev, unsigned char req, + u16 index, u16 value, void *buf, + s32 buf_len, int bOut); #define dprintk(level, fmt, arg...) \ do { \ @@ -407,6 +430,10 @@ static const struct s2255_fmt formats[] = { .fourcc = V4L2_PIX_FMT_UYVY, .depth = 16 }, { + .name = "JPG", + .fourcc = V4L2_PIX_FMT_JPEG, + .depth = 24 + }, { .name = "8bpp GREY", .fourcc = V4L2_PIX_FMT_GREY, .depth = 8 @@ -464,6 +491,13 @@ static void planar422p_to_yuv_packed(const unsigned char *in, return; } +static void s2255_reset_dsppower(struct s2255_dev *dev) +{ + s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1); + msleep(10); + s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1); + return; +} /* kickstarts the firmware loading. from probe */ @@ -480,18 +514,6 @@ static void s2255_timer(unsigned long user_data) } } -/* called when DSP is up and running. DSP is guaranteed to - be running after S2255_DSP_BOOTTIME */ -static void s2255_dsp_running(unsigned long user_data) -{ - struct s2255_fw *data = (struct s2255_fw *)user_data; - dprintk(1, "dsp running\n"); - atomic_set(&data->fw_state, S2255_FW_SUCCESS); - wake_up(&data->wait_fw); - printk(KERN_INFO "s2255: firmware loaded successfully\n"); - return; -} - /* this loads the firmware asynchronously. Originally this was done synchroously in probe. @@ -549,19 +571,14 @@ static void s2255_fwchunk_complete(struct urb *urb) } data->fw_loaded += len; } else { - init_timer(&data->dsp_wait); - data->dsp_wait.function = s2255_dsp_running; - data->dsp_wait.data = (unsigned long)data; atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT); - mod_timer(&data->dsp_wait, msecs_to_jiffies(S2255_DSP_BOOTTIME) - + jiffies); } dprintk(100, "2255 complete done\n"); return; } -static int s2255_got_frame(struct s2255_dev *dev, int chn) +static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) { struct s2255_dmaqueue *dma_q = &dev->vidq[chn]; struct s2255_buffer *buf; @@ -586,8 +603,7 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn) list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); - - s2255_fillbuff(dev, buf, dma_q->channel); + s2255_fillbuff(dev, buf, dma_q->channel, jpgsize); wake_up(&buf->vb.done); dprintk(2, "wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i); unlock: @@ -621,7 +637,7 @@ static const struct s2255_fmt *format_by_fourcc(int fourcc) * */ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, - int chn) + int chn, int jpgsize) { int pos = 0; struct timeval ts; @@ -649,6 +665,10 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, case V4L2_PIX_FMT_GREY: memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height); break; + case V4L2_PIX_FMT_JPEG: + buf->vb.size = jpgsize; + memcpy(vbuf, tmpbuf, buf->vb.size); + break; case V4L2_PIX_FMT_YUV422P: memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height * 2); @@ -657,9 +677,6 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, printk(KERN_DEBUG "s2255: unknown format?\n"); } dev->last_frame[chn] = -1; - /* done with the frame, free it */ - frm->ulState = 0; - dprintk(4, "freeing buffer\n"); } else { printk(KERN_ERR "s2255: =======no frame\n"); return; @@ -1021,6 +1038,10 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, case V4L2_PIX_FMT_GREY: fh->mode.color = COLOR_Y8; break; + case V4L2_PIX_FMT_JPEG: + fh->mode.color = COLOR_JPG | + (fh->dev->jc[fh->channel].quality << 8); + break; case V4L2_PIX_FMT_YUV422P: fh->mode.color = COLOR_YUVPL; break; @@ -1139,7 +1160,7 @@ static u32 get_transfer_size(struct s2255_mode *mode) } } outImageSize = linesPerFrame * pixelsPerLine; - if (mode->color != COLOR_Y8) { + if ((mode->color & MASK_COLOR) != COLOR_Y8) { /* 2 bytes/pixel if not monochrome */ outImageSize *= 2; } @@ -1185,12 +1206,17 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, u32 *buffer; unsigned long chn_rev; + mutex_lock(&dev->lock); chn_rev = G_chnmap[chn]; dprintk(3, "mode scale [%ld] %p %d\n", chn, mode, mode->scale); dprintk(3, "mode scale [%ld] %p %d\n", chn, &dev->mode[chn], dev->mode[chn].scale); dprintk(2, "mode contrast %x\n", mode->contrast); + /* if JPEG, set the quality */ + if ((mode->color & MASK_COLOR) == COLOR_JPG) + mode->color = (dev->jc[chn].quality << 8) | COLOR_JPG; + /* save the mode */ dev->mode[chn] = *mode; dev->req_image_size[chn] = get_transfer_size(mode); @@ -1199,6 +1225,7 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, buffer = kzalloc(512, GFP_KERNEL); if (buffer == NULL) { dev_err(&dev->udev->dev, "out of mem\n"); + mutex_unlock(&dev->lock); return -ENOMEM; } @@ -1214,12 +1241,20 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, dprintk(1, "set mode done chn %lu, %d\n", chn, res); /* wait at least 3 frames before continuing */ - if (mode->restart) - msleep(125); + if (mode->restart) { + dev->setmode_ready[chn] = 0; + wait_event_timeout(dev->wait_setmode[chn], + (dev->setmode_ready[chn] != 0), + msecs_to_jiffies(S2255_SETMODE_TIMEOUT)); + if (dev->setmode_ready[chn] != 1) { + printk(KERN_DEBUG "s2255: no set mode response\n"); + res = -EFAULT; + } + } /* clear the restart flag */ dev->mode[chn].restart = 0; - + mutex_unlock(&dev->lock); return res; } @@ -1270,7 +1305,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) dev->cur_frame[chn] = 0; dev->frame_count[chn] = 0; for (j = 0; j < SYS_FRAMES; j++) { - dev->buffer[chn].frame[j].ulState = 0; + dev->buffer[chn].frame[j].ulState = S2255_READ_IDLE; dev->buffer[chn].frame[j].cur_size = 0; } res = videobuf_streamon(&fh->vb_vidq); @@ -1446,6 +1481,27 @@ static int vidioc_s_ctrl(struct file *file, void *priv, return -EINVAL; } +static int vidioc_g_jpegcomp(struct file *file, void *priv, + struct v4l2_jpegcompression *jc) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + *jc = dev->jc[fh->channel]; + dprintk(2, "getting jpegcompression, quality %d\n", jc->quality); + return 0; +} + +static int vidioc_s_jpegcomp(struct file *file, void *priv, + struct v4l2_jpegcompression *jc) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + if (jc->quality < 0 || jc->quality > 100) + return -EINVAL; + dev->jc[fh->channel].quality = jc->quality; + dprintk(2, "setting jpeg quality %d\n", jc->quality); + return 0; +} static int s2255_open(struct inode *inode, struct file *file) { int minor = iminor(inode); @@ -1455,8 +1511,10 @@ static int s2255_open(struct inode *inode, struct file *file) enum v4l2_buf_type type = 0; int i = 0; int cur_channel = -1; + int state; dprintk(1, "s2255: open called (minor=%d)\n", minor); + lock_kernel(); list_for_each(list, &s2255_devlist) { h = list_entry(list, struct s2255_dev, s2255_devlist); for (i = 0; i < MAX_CHANNELS; i++) { @@ -1469,45 +1527,78 @@ static int s2255_open(struct inode *inode, struct file *file) } if ((NULL == dev) || (cur_channel == -1)) { - dprintk(1, "s2255: openv4l no dev\n"); + unlock_kernel(); + printk(KERN_INFO "s2255: openv4l no dev\n"); return -ENODEV; } + if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_DISCONNECTING) { + unlock_kernel(); + printk(KERN_INFO "disconnecting\n"); + return -ENODEV; + } + kref_get(&dev->kref); mutex_lock(&dev->open_lock); dev->users[cur_channel]++; dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]); - if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) { + switch (atomic_read(&dev->fw_data->fw_state)) { + case S2255_FW_FAILED: err("2255 firmware load failed. retrying.\n"); - s2255_fwload_start(dev); + s2255_fwload_start(dev, 1); wait_event_timeout(dev->fw_data->wait_fw, - (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_NOTLOADED), + ((atomic_read(&dev->fw_data->fw_state) + == S2255_FW_SUCCESS) || + (atomic_read(&dev->fw_data->fw_state) + == S2255_FW_DISCONNECTING)), msecs_to_jiffies(S2255_LOAD_TIMEOUT)); - if (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_SUCCESS) { - printk(KERN_INFO "2255 FW load failed.\n"); - dev->users[cur_channel]--; - mutex_unlock(&dev->open_lock); - return -EFAULT; - } - } else if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_NOTLOADED) { + break; + case S2255_FW_NOTLOADED: + case S2255_FW_LOADED_DSPWAIT: /* give S2255_LOAD_TIMEOUT time for firmware to load in case driver loaded and then device immediately opened */ printk(KERN_INFO "%s waiting for firmware load\n", __func__); wait_event_timeout(dev->fw_data->wait_fw, - (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_NOTLOADED), - msecs_to_jiffies(S2255_LOAD_TIMEOUT)); - if (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_SUCCESS) { - printk(KERN_INFO "2255 firmware not loaded" - "try again\n"); - dev->users[cur_channel]--; - mutex_unlock(&dev->open_lock); - return -EBUSY; + ((atomic_read(&dev->fw_data->fw_state) + == S2255_FW_SUCCESS) || + (atomic_read(&dev->fw_data->fw_state) + == S2255_FW_DISCONNECTING)), + msecs_to_jiffies(S2255_LOAD_TIMEOUT)); + break; + case S2255_FW_SUCCESS: + default: + break; + } + state = atomic_read(&dev->fw_data->fw_state); + if (state != S2255_FW_SUCCESS) { + int rc; + switch (state) { + case S2255_FW_FAILED: + printk(KERN_INFO "2255 FW load failed. %d\n", state); + rc = -ENODEV; + break; + case S2255_FW_DISCONNECTING: + printk(KERN_INFO "%s: disconnecting\n", __func__); + rc = -ENODEV; + break; + case S2255_FW_LOADED_DSPWAIT: + case S2255_FW_NOTLOADED: + printk(KERN_INFO "%s: firmware not loaded yet" + "please try again later\n", + __func__); + rc = -EAGAIN; + break; + default: + printk(KERN_INFO "%s: unknown state\n", __func__); + rc = -EFAULT; + break; } + dev->users[cur_channel]--; + mutex_unlock(&dev->open_lock); + kref_put(&dev->kref, s2255_destroy); + unlock_kernel(); + return rc; } /* allocate + initialize per filehandle data */ @@ -1515,6 +1606,8 @@ static int s2255_open(struct inode *inode, struct file *file) if (NULL == fh) { dev->users[cur_channel]--; mutex_unlock(&dev->open_lock); + kref_put(&dev->kref, s2255_destroy); + unlock_kernel(); return -ENOMEM; } @@ -1528,6 +1621,13 @@ static int s2255_open(struct inode *inode, struct file *file) fh->height = NUM_LINES_4CIFS_NTSC * 2; fh->channel = cur_channel; + /* configure channel to default state */ + if (!dev->chn_configured[cur_channel]) { + s2255_set_mode(dev, cur_channel, &fh->mode); + dev->chn_configured[cur_channel] = 1; + } + + /* Put all controls at a sane state */ for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) qctl_regs[i] = s2255_qctrl[i].default_value; @@ -1546,8 +1646,8 @@ static int s2255_open(struct inode *inode, struct file *file) V4L2_FIELD_INTERLACED, sizeof(struct s2255_buffer), fh); - kref_get(&dev->kref); mutex_unlock(&dev->open_lock); + unlock_kernel(); return 0; } @@ -1569,30 +1669,24 @@ static unsigned int s2255_poll(struct file *file, static void s2255_destroy(struct kref *kref) { struct s2255_dev *dev = to_s2255_dev(kref); + struct list_head *list; + int i; if (!dev) { printk(KERN_ERR "s2255drv: kref problem\n"); return; } - - /* - * Wake up any firmware load waiting (only done in .open, - * which holds the open_lock mutex) - */ atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); wake_up(&dev->fw_data->wait_fw); - - /* prevent s2255_disconnect from racing s2255_open */ + for (i = 0; i < MAX_CHANNELS; i++) { + dev->setmode_ready[i] = 1; + wake_up(&dev->wait_setmode[i]); + } mutex_lock(&dev->open_lock); + /* reset the DSP so firmware can be reload next time */ + s2255_reset_dsppower(dev); s2255_exit_v4l(dev); - /* - * device unregistered so no longer possible to open. open_mutex - * can be unlocked and timers deleted afterwards. - */ - mutex_unlock(&dev->open_lock); - /* board shutdown stops the read pipe if it is running */ s2255_board_shutdown(dev); - /* make sure firmware still not trying to load */ del_timer(&dev->timer); /* only started in .probe and .open */ @@ -1602,23 +1696,19 @@ static void s2255_destroy(struct kref *kref) usb_free_urb(dev->fw_data->fw_urb); dev->fw_data->fw_urb = NULL; } - - /* - * delete the dsp_wait timer, which sets the firmware - * state on completion. This is done before fw_data - * is freed below. - */ - - del_timer(&dev->fw_data->dsp_wait); /* only started in .open */ - if (dev->fw_data->fw) release_firmware(dev->fw_data->fw); kfree(dev->fw_data->pfw_data); kfree(dev->fw_data); - usb_put_dev(dev->udev); dprintk(1, "%s", __func__); kfree(dev); + + while (!list_empty(&s2255_devlist)) { + list = s2255_devlist.next; + list_del(list); + } + mutex_unlock(&dev->open_lock); } static int s2255_close(struct inode *inode, struct file *file) @@ -1702,6 +1792,8 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = { #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidioc_cgmbuf, #endif + .vidioc_s_jpegcomp = vidioc_s_jpegcomp, + .vidioc_g_jpegcomp = vidioc_g_jpegcomp, }; static struct video_device template = { @@ -1740,7 +1832,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev) ret = video_register_device(dev->vdev[i], VFL_TYPE_GRABBER, cur_nr + i); - dev->vdev[i]->priv = dev; + video_set_drvdata(dev->vdev[i], dev); if (ret != 0) { dev_err(&dev->udev->dev, @@ -1754,18 +1846,16 @@ static int s2255_probe_v4l(struct s2255_dev *dev) static void s2255_exit_v4l(struct s2255_dev *dev) { - struct list_head *list; + int i; - /* unregister the video devices */ - while (!list_empty(&s2255_devlist)) { - list = s2255_devlist.next; - list_del(list); - } for (i = 0; i < MAX_CHANNELS; i++) { - if (-1 != dev->vdev[i]->minor) + if (-1 != dev->vdev[i]->minor) { video_unregister_device(dev->vdev[i]); - else + printk(KERN_INFO "s2255 unregistered\n"); + } else { video_device_release(dev->vdev[i]); + printk(KERN_INFO "s2255 released\n"); + } } } @@ -1775,134 +1865,123 @@ static void s2255_exit_v4l(struct s2255_dev *dev) * function again). * * Received frame structure: - * bytes 0-3: marker : 0x2255DA4AL (FRAME_MARKER) + * bytes 0-3: marker : 0x2255DA4AL (S2255_MARKER_FRAME) * bytes 4-7: channel: 0-3 * bytes 8-11: payload size: size of the frame * bytes 12-payloadsize+12: frame data */ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) { - static int dbgsync; /* = 0; */ char *pdest; u32 offset = 0; - int bsync = 0; - int btrunc = 0; + int bframe = 0; char *psrc; unsigned long copy_size; unsigned long size; s32 idx = -1; struct s2255_framei *frm; unsigned char *pdata; - unsigned long cur_size; - int bsearch = 0; - struct s2255_bufferi *buf; + dprintk(100, "buffer to user\n"); idx = dev->cur_frame[dev->cc]; - buf = &dev->buffer[dev->cc]; - frm = &buf->frame[idx]; - - if (frm->ulState == 0) { - frm->ulState = 1; - frm->cur_size = 0; - bsearch = 1; - } else if (frm->ulState == 2) { - /* system frame was not freed */ - dprintk(2, "sys frame not free. overrun ringbuf\n"); - bsearch = 1; - frm->ulState = 1; - frm->cur_size = 0; - } - - if (bsearch) { - if (*(s32 *) pipe_info->transfer_buffer != FRAME_MARKER) { - u32 jj; - if (dbgsync == 0) { - dprintk(3, "not synched, discarding all packets" - "until marker\n"); + frm = &dev->buffer[dev->cc].frame[idx]; - dbgsync++; - } - pdata = (unsigned char *)pipe_info->transfer_buffer; - for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); - jj++) { - if (*(s32 *) pdata == FRAME_MARKER) { - int cc; - dprintk(3, - "found frame marker at offset:" - " %d [%x %x]\n", jj, pdata[0], - pdata[1]); - offset = jj; - bsync = 1; - cc = *(u32 *) (pdata + sizeof(u32)); - if (cc >= MAX_CHANNELS) { - printk(KERN_ERR - "bad channel\n"); - return -EINVAL; - } - /* reverse it */ - dev->cc = G_chnmap[cc]; + if (frm->ulState == S2255_READ_IDLE) { + int jj; + unsigned int cc; + s32 *pdword; + int payload; + /* search for marker codes */ + pdata = (unsigned char *)pipe_info->transfer_buffer; + for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); jj++) { + switch (*(s32 *) pdata) { + case S2255_MARKER_FRAME: + pdword = (s32 *)pdata; + dprintk(4, "found frame marker at offset:" + " %d [%x %x]\n", jj, pdata[0], + pdata[1]); + offset = jj + PREFIX_SIZE; + bframe = 1; + cc = pdword[1]; + if (cc >= MAX_CHANNELS) { + printk(KERN_ERR + "bad channel\n"); + return -EINVAL; + } + /* reverse it */ + dev->cc = G_chnmap[cc]; + payload = pdword[3]; + if (payload > dev->req_image_size[dev->cc]) { + dev->bad_payload[dev->cc]++; + /* discard the bad frame */ + return -EINVAL; + } + dev->pkt_size[dev->cc] = payload; + dev->jpg_size[dev->cc] = pdword[4]; + break; + case S2255_MARKER_RESPONSE: + pdword = (s32 *)pdata; + pdata += DEF_USB_BLOCK; + jj += DEF_USB_BLOCK; + if (pdword[1] >= MAX_CHANNELS) + break; + cc = G_chnmap[pdword[1]]; + if (!(cc >= 0 && cc < MAX_CHANNELS)) + break; + switch (pdword[2]) { + case 0x01: + /* check if channel valid */ + /* set mode ready */ + dev->setmode_ready[cc] = 1; + wake_up(&dev->wait_setmode[cc]); + dprintk(5, "setmode ready %d\n", cc); break; + case 0x10: + + dev->chn_ready |= (1 << cc); + if ((dev->chn_ready & 0x0f) != 0x0f) + break; + /* all channels ready */ + printk(KERN_INFO "s2255: fw loaded\n"); + atomic_set(&dev->fw_data->fw_state, + S2255_FW_SUCCESS); + wake_up(&dev->fw_data->wait_fw); + break; + default: + printk(KERN_INFO "s2255 unknwn resp\n"); } + default: pdata++; + break; } - if (bsync == 0) - return -EINVAL; - } else { - u32 *pword; - u32 payload; - int cc; - dbgsync = 0; - bsync = 1; - pword = (u32 *) pipe_info->transfer_buffer; - cc = pword[1]; - - if (cc >= MAX_CHANNELS) { - printk("invalid channel found. " - "throwing out data!\n"); - return -EINVAL; - } - dev->cc = G_chnmap[cc]; - payload = pword[2]; - if (payload != dev->req_image_size[dev->cc]) { - dprintk(1, "[%d][%d]unexpected payload: %d" - "required: %lu \n", cc, dev->cc, - payload, dev->req_image_size[dev->cc]); - dev->bad_payload[dev->cc]++; - /* discard the bad frame */ - return -EINVAL; - } - - } - } - /* search done. now find out if should be acquiring - on this channel */ - if (!dev->b_acquire[dev->cc]) { - frm->ulState = 0; - return -EINVAL; + if (bframe) + break; + } /* for */ + if (!bframe) + return -EINVAL; } + idx = dev->cur_frame[dev->cc]; frm = &dev->buffer[dev->cc].frame[idx]; - if (frm->ulState == 0) { - frm->ulState = 1; - frm->cur_size = 0; - } else if (frm->ulState == 2) { - /* system frame ring buffer overrun */ - dprintk(2, "sys frame overrun. overwriting frame %d %d\n", - dev->cc, idx); - frm->ulState = 1; - frm->cur_size = 0; + /* search done. now find out if should be acquiring on this channel */ + if (!dev->b_acquire[dev->cc]) { + /* we found a frame, but this channel is turned off */ + frm->ulState = S2255_READ_IDLE; + return -EINVAL; } - if (bsync) { - /* skip the marker 512 bytes (and offset if out of sync) */ - psrc = (u8 *)pipe_info->transfer_buffer + offset + PREFIX_SIZE; - } else { - psrc = (u8 *)pipe_info->transfer_buffer; + if (frm->ulState == S2255_READ_IDLE) { + frm->ulState = S2255_READ_FRAME; + frm->cur_size = 0; } + /* skip the marker 512 bytes (and offset if out of sync) */ + psrc = (u8 *)pipe_info->transfer_buffer + offset; + + if (frm->lpvbits == NULL) { dprintk(1, "s2255 frame buffer == NULL.%p %p %d %d", frm, dev, dev->cc, idx); @@ -1911,33 +1990,20 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) pdest = frm->lpvbits + frm->cur_size; - if (bsync) { - copy_size = - (pipe_info->cur_transfer_size - offset) - PREFIX_SIZE; - if (copy_size > pipe_info->cur_transfer_size) { - printk("invalid copy size, overflow!\n"); - return -ENOMEM; - } - } else { - copy_size = pipe_info->cur_transfer_size; - } + copy_size = (pipe_info->cur_transfer_size - offset); - cur_size = frm->cur_size; - size = dev->req_image_size[dev->cc]; + size = dev->pkt_size[dev->cc] - PREFIX_SIZE; - if ((copy_size + cur_size) > size) { - copy_size = size - cur_size; - btrunc = 1; - } + /* sanity check on pdest */ + if ((copy_size + frm->cur_size) < dev->req_image_size[dev->cc]) + memcpy(pdest, psrc, copy_size); - memcpy(pdest, psrc, copy_size); - cur_size += copy_size; frm->cur_size += copy_size; - dprintk(50, "cur_size size %lu size %lu \n", cur_size, size); + dprintk(4, "cur_size size %lu size %lu \n", frm->cur_size, size); + + if (frm->cur_size >= size) { - if (cur_size >= (size - PREFIX_SIZE)) { u32 cc = dev->cc; - frm->ulState = 2; dprintk(2, "****************[%d]Buffer[%d]full*************\n", cc, idx); dev->last_frame[cc] = dev->cur_frame[cc]; @@ -1946,16 +2012,13 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) if ((dev->cur_frame[cc] == SYS_FRAMES) || (dev->cur_frame[cc] == dev->buffer[cc].dwFrames)) dev->cur_frame[cc] = 0; - - /* signal the semaphore for this channel */ + /* frame ready */ if (dev->b_acquire[cc]) - s2255_got_frame(dev, cc); + s2255_got_frame(dev, cc, dev->jpg_size[cc]); dev->frame_count[cc]++; - } - /* frame was truncated */ - if (btrunc) { - /* return more data to process */ - return EAGAIN; + frm->ulState = S2255_READ_IDLE; + frm->cur_size = 0; + } /* done successfully */ return 0; @@ -1974,8 +2037,8 @@ static void s2255_read_video_callback(struct s2255_dev *dev, } /* otherwise copy to the system buffers */ res = save_frame(dev, pipe_info); - if (res == EAGAIN) - save_frame(dev, pipe_info); + if (res != 0) + dprintk(4, "s2255: read callback failed\n"); dprintk(50, "callback read video done\n"); return; @@ -2095,11 +2158,9 @@ static int s2255_board_init(struct s2255_dev *dev) memset(pipe, 0, sizeof(*pipe)); pipe->dev = dev; - pipe->cur_transfer_size = DEFAULT_PIPE_USBBLOCK; - pipe->max_transfer_size = MAX_PIPE_USBBLOCK; + pipe->cur_transfer_size = S2255_USB_XFER_SIZE; + pipe->max_transfer_size = S2255_USB_XFER_SIZE; - if (pipe->cur_transfer_size > pipe->max_transfer_size) - pipe->cur_transfer_size = pipe->max_transfer_size; pipe->transfer_buffer = kzalloc(pipe->max_transfer_size, GFP_KERNEL); if (pipe->transfer_buffer == NULL) { @@ -2119,6 +2180,7 @@ static int s2255_board_init(struct s2255_dev *dev) for (j = 0; j < MAX_CHANNELS; j++) { dev->b_acquire[j] = 0; dev->mode[j] = mode_def; + dev->jc[j].quality = S2255_DEF_JPEG_QUAL; dev->cur_fmt[j] = &formats[0]; dev->mode[j].restart = 1; dev->req_image_size[j] = get_transfer_size(&mode_def); @@ -2323,7 +2385,7 @@ static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn) kfree(buffer); dev->b_acquire[chn] = 0; - return 0; + return res; } static void s2255_stop_readpipe(struct s2255_dev *dev) @@ -2359,8 +2421,10 @@ static void s2255_stop_readpipe(struct s2255_dev *dev) return; } -static void s2255_fwload_start(struct s2255_dev *dev) +static void s2255_fwload_start(struct s2255_dev *dev, int reset) { + if (reset) + s2255_reset_dsppower(dev); dev->fw_data->fw_size = dev->fw_data->fw->size; atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED); memcpy(dev->fw_data->pfw_data, @@ -2383,6 +2447,8 @@ static int s2255_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *endpoint; int i; int retval = -ENOMEM; + __le32 *pdata; + int fw_size; dprintk(2, "s2255: probe\n"); @@ -2437,6 +2503,8 @@ static int s2255_probe(struct usb_interface *interface, dev->timer.data = (unsigned long)dev->fw_data; init_waitqueue_head(&dev->fw_data->wait_fw); + for (i = 0; i < MAX_CHANNELS; i++) + init_waitqueue_head(&dev->wait_setmode[i]); dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -2456,16 +2524,30 @@ static int s2255_probe(struct usb_interface *interface, printk(KERN_ERR "sensoray 2255 failed to get firmware\n"); goto error; } + /* check the firmware is valid */ + fw_size = dev->fw_data->fw->size; + pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8]; + if (*pdata != S2255_FW_MARKER) { + printk(KERN_INFO "Firmware invalid.\n"); + retval = -ENODEV; + goto error; + } else { + /* make sure firmware is the latest */ + __le32 *pRel; + pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4]; + printk(KERN_INFO "s2255 dsp fw version %x\n", *pRel); + } /* loads v4l specific */ s2255_probe_v4l(dev); + usb_reset_device(dev->udev); /* load 2255 board specific */ s2255_board_init(dev); dprintk(4, "before probe done %p\n", dev); spin_lock_init(&dev->slock); - s2255_fwload_start(dev); + s2255_fwload_start(dev, 0); dev_info(&interface->dev, "Sensoray 2255 detected\n"); return 0; error: @@ -2476,14 +2558,30 @@ error: static void s2255_disconnect(struct usb_interface *interface) { struct s2255_dev *dev = NULL; + int i; dprintk(1, "s2255: disconnect interface %p\n", interface); dev = usb_get_intfdata(interface); + + /* + * wake up any of the timers to allow open_lock to be + * acquired sooner + */ + atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); + wake_up(&dev->fw_data->wait_fw); + for (i = 0; i < MAX_CHANNELS; i++) { + dev->setmode_ready[i] = 1; + wake_up(&dev->wait_setmode[i]); + } + + mutex_lock(&dev->open_lock); + usb_set_intfdata(interface, NULL); + mutex_unlock(&dev->open_lock); + if (dev) { kref_put(&dev->kref, s2255_destroy); dprintk(1, "s2255drv: disconnect\n"); dev_info(&interface->dev, "s2255usb now disconnected\n"); } - usb_set_intfdata(interface, NULL); } static struct usb_driver s2255_driver = { diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 6ee63e69b36..4a21b8a6a70 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -43,135 +43,363 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/i2c.h> +#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/videotext.h> #include <linux/videodev.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> -#include <linux/mutex.h> - -#include "saa5246a.h" +#include <media/v4l2-i2c-drv-legacy.h> MODULE_AUTHOR("Michael Geng <linux@MichaelGeng.de>"); MODULE_DESCRIPTION("Philips SAA5246A, SAA5281 Teletext decoder driver"); MODULE_LICENSE("GPL"); -struct saa5246a_device -{ - u8 pgbuf[NUM_DAUS][VTX_VIRTUALSIZE]; - int is_searching[NUM_DAUS]; - struct i2c_client *client; - struct mutex lock; -}; +#define MAJOR_VERSION 1 /* driver major version number */ +#define MINOR_VERSION 8 /* driver minor version number */ + +/* Number of DAUs = number of pages that can be searched at the same time. */ +#define NUM_DAUS 4 + +#define NUM_ROWS_PER_PAGE 40 + +/* first column is 0 (not 1) */ +#define POS_TIME_START 32 +#define POS_TIME_END 39 + +#define POS_HEADER_START 7 +#define POS_HEADER_END 31 + +/* Returns 'true' if the part of the videotext page described with req contains + (at least parts of) the time field */ +#define REQ_CONTAINS_TIME(p_req) \ + ((p_req)->start <= POS_TIME_END && \ + (p_req)->end >= POS_TIME_START) + +/* Returns 'true' if the part of the videotext page described with req contains + (at least parts of) the page header */ +#define REQ_CONTAINS_HEADER(p_req) \ + ((p_req)->start <= POS_HEADER_END && \ + (p_req)->end >= POS_HEADER_START) + +/*****************************************************************************/ +/* Mode register numbers of the SAA5246A */ +/*****************************************************************************/ +#define SAA5246A_REGISTER_R0 0 +#define SAA5246A_REGISTER_R1 1 +#define SAA5246A_REGISTER_R2 2 +#define SAA5246A_REGISTER_R3 3 +#define SAA5246A_REGISTER_R4 4 +#define SAA5246A_REGISTER_R5 5 +#define SAA5246A_REGISTER_R6 6 +#define SAA5246A_REGISTER_R7 7 +#define SAA5246A_REGISTER_R8 8 +#define SAA5246A_REGISTER_R9 9 +#define SAA5246A_REGISTER_R10 10 +#define SAA5246A_REGISTER_R11 11 +#define SAA5246A_REGISTER_R11B 11 + +/* SAA5246A mode registers often autoincrement to the next register. + Therefore we use variable argument lists. The following macro indicates + the end of a command list. */ +#define COMMAND_END (-1) + +/*****************************************************************************/ +/* Contents of the mode registers of the SAA5246A */ +/*****************************************************************************/ +/* Register R0 (Advanced Control) */ +#define R0_SELECT_R11 0x00 +#define R0_SELECT_R11B 0x01 + +#define R0_PLL_TIME_CONSTANT_LONG 0x00 +#define R0_PLL_TIME_CONSTANT_SHORT 0x02 + +#define R0_ENABLE_nODD_EVEN_OUTPUT 0x00 +#define R0_DISABLE_nODD_EVEN_OUTPUT 0x04 + +#define R0_ENABLE_HDR_POLL 0x00 +#define R0_DISABLE_HDR_POLL 0x10 + +#define R0_DO_NOT_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x00 +#define R0_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x20 + +#define R0_NO_FREE_RUN_PLL 0x00 +#define R0_FREE_RUN_PLL 0x40 + +#define R0_NO_AUTOMATIC_FASTEXT_PROMPT 0x00 +#define R0_AUTOMATIC_FASTEXT_PROMPT 0x80 + +/* Register R1 (Mode) */ +#define R1_INTERLACED_312_AND_HALF_312_AND_HALF_LINES 0x00 +#define R1_NON_INTERLACED_312_313_LINES 0x01 +#define R1_NON_INTERLACED_312_312_LINES 0x02 +#define R1_FFB_LEADING_EDGE_IN_FIRST_BROAD_PULSE 0x03 +#define R1_FFB_LEADING_EDGE_IN_SECOND_BROAD_PULSE 0x07 + +#define R1_DEW 0x00 +#define R1_FULL_FIELD 0x08 + +#define R1_EXTENDED_PACKET_DISABLE 0x00 +#define R1_EXTENDED_PACKET_ENABLE 0x10 + +#define R1_DAUS_ALL_ON 0x00 +#define R1_DAUS_ALL_OFF 0x20 + +#define R1_7_BITS_PLUS_PARITY 0x00 +#define R1_8_BITS_NO_PARITY 0x40 + +#define R1_VCS_TO_SCS 0x00 +#define R1_NO_VCS_TO_SCS 0x80 + +/* Register R2 (Page request address) */ +#define R2_IN_R3_SELECT_PAGE_HUNDREDS 0x00 +#define R2_IN_R3_SELECT_PAGE_TENS 0x01 +#define R2_IN_R3_SELECT_PAGE_UNITS 0x02 +#define R2_IN_R3_SELECT_HOURS_TENS 0x03 +#define R2_IN_R3_SELECT_HOURS_UNITS 0x04 +#define R2_IN_R3_SELECT_MINUTES_TENS 0x05 +#define R2_IN_R3_SELECT_MINUTES_UNITS 0x06 + +#define R2_DAU_0 0x00 +#define R2_DAU_1 0x10 +#define R2_DAU_2 0x20 +#define R2_DAU_3 0x30 + +#define R2_BANK_0 0x00 +#define R2_BANK 1 0x40 + +#define R2_HAMMING_CHECK_ON 0x80 +#define R2_HAMMING_CHECK_OFF 0x00 + +/* Register R3 (Page request data) */ +#define R3_PAGE_HUNDREDS_0 0x00 +#define R3_PAGE_HUNDREDS_1 0x01 +#define R3_PAGE_HUNDREDS_2 0x02 +#define R3_PAGE_HUNDREDS_3 0x03 +#define R3_PAGE_HUNDREDS_4 0x04 +#define R3_PAGE_HUNDREDS_5 0x05 +#define R3_PAGE_HUNDREDS_6 0x06 +#define R3_PAGE_HUNDREDS_7 0x07 -static struct video_device saa_template; /* Declared near bottom */ +#define R3_HOLD_PAGE 0x00 +#define R3_UPDATE_PAGE 0x08 -/* Addresses to scan */ -static unsigned short normal_i2c[] = { I2C_ADDRESS, I2C_CLIENT_END }; +#define R3_PAGE_HUNDREDS_DO_NOT_CARE 0x00 +#define R3_PAGE_HUNDREDS_DO_CARE 0x10 -I2C_CLIENT_INSMOD; +#define R3_PAGE_TENS_DO_NOT_CARE 0x00 +#define R3_PAGE_TENS_DO_CARE 0x10 -static struct i2c_client client_template; +#define R3_PAGE_UNITS_DO_NOT_CARE 0x00 +#define R3_PAGE_UNITS_DO_CARE 0x10 -static int saa5246a_attach(struct i2c_adapter *adap, int addr, int kind) -{ - int pgbuf; - int err; - struct i2c_client *client; - struct video_device *vd; - struct saa5246a_device *t; +#define R3_HOURS_TENS_DO_NOT_CARE 0x00 +#define R3_HOURS_TENS_DO_CARE 0x10 - printk(KERN_INFO "saa5246a: teletext chip found.\n"); - client=kmalloc(sizeof(*client), GFP_KERNEL); - if(client==NULL) - return -ENOMEM; - client_template.adapter = adap; - client_template.addr = addr; - memcpy(client, &client_template, sizeof(*client)); - t = kzalloc(sizeof(*t), GFP_KERNEL); - if(t==NULL) - { - kfree(client); - return -ENOMEM; - } - strlcpy(client->name, IF_NAME, I2C_NAME_SIZE); - mutex_init(&t->lock); +#define R3_HOURS_UNITS_DO_NOT_CARE 0x00 +#define R3_HOURS_UNITS_DO_CARE 0x10 - /* - * Now create a video4linux device - */ +#define R3_MINUTES_TENS_DO_NOT_CARE 0x00 +#define R3_MINUTES_TENS_DO_CARE 0x10 - vd = video_device_alloc(); - if(vd==NULL) - { - kfree(t); - kfree(client); - return -ENOMEM; - } - i2c_set_clientdata(client, vd); - memcpy(vd, &saa_template, sizeof(*vd)); +#define R3_MINUTES_UNITS_DO_NOT_CARE 0x00 +#define R3_MINUTES_UNITS_DO_CARE 0x10 - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) - { - memset(t->pgbuf[pgbuf], ' ', sizeof(t->pgbuf[0])); - t->is_searching[pgbuf] = false; - } - vd->priv=t; +/* Register R4 (Display chapter) */ +#define R4_DISPLAY_PAGE_0 0x00 +#define R4_DISPLAY_PAGE_1 0x01 +#define R4_DISPLAY_PAGE_2 0x02 +#define R4_DISPLAY_PAGE_3 0x03 +#define R4_DISPLAY_PAGE_4 0x04 +#define R4_DISPLAY_PAGE_5 0x05 +#define R4_DISPLAY_PAGE_6 0x06 +#define R4_DISPLAY_PAGE_7 0x07 +/* Register R5 (Normal display control) */ +#define R5_PICTURE_INSIDE_BOXING_OFF 0x00 +#define R5_PICTURE_INSIDE_BOXING_ON 0x01 - /* - * Register it - */ +#define R5_PICTURE_OUTSIDE_BOXING_OFF 0x00 +#define R5_PICTURE_OUTSIDE_BOXING_ON 0x02 - if((err=video_register_device(vd, VFL_TYPE_VTX,-1))<0) - { - kfree(t); - kfree(client); - video_device_release(vd); - return err; - } - t->client = client; - i2c_attach_client(client); - return 0; -} +#define R5_TEXT_INSIDE_BOXING_OFF 0x00 +#define R5_TEXT_INSIDE_BOXING_ON 0x04 -/* - * We do most of the hard work when we become a device on the i2c. - */ -static int saa5246a_probe(struct i2c_adapter *adap) -{ - if (adap->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adap, &addr_data, saa5246a_attach); - return 0; -} +#define R5_TEXT_OUTSIDE_BOXING_OFF 0x00 +#define R5_TEXT_OUTSIDE_BOXING_ON 0x08 -static int saa5246a_detach(struct i2c_client *client) -{ - struct video_device *vd = i2c_get_clientdata(client); - i2c_detach_client(client); - video_unregister_device(vd); - kfree(vd->priv); - kfree(client); - return 0; -} +#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 +#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 -/* - * I2C interfaces - */ +#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 +#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 + +#define R5_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 +#define R5_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 + +#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 +#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 + +/* Register R6 (Newsflash display) */ +#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_ON 0x01 + +#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_ON 0x02 + +#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_ON 0x04 + +#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_ON 0x08 + +#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 + +#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 + +#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 + +#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 + +/* Register R7 (Display mode) */ +#define R7_BOX_OFF_ROW_0 0x00 +#define R7_BOX_ON_ROW_0 0x01 + +#define R7_BOX_OFF_ROW_1_TO_23 0x00 +#define R7_BOX_ON_ROW_1_TO_23 0x02 + +#define R7_BOX_OFF_ROW_24 0x00 +#define R7_BOX_ON_ROW_24 0x04 + +#define R7_SINGLE_HEIGHT 0x00 +#define R7_DOUBLE_HEIGHT 0x08 + +#define R7_TOP_HALF 0x00 +#define R7_BOTTOM_HALF 0x10 + +#define R7_REVEAL_OFF 0x00 +#define R7_REVEAL_ON 0x20 + +#define R7_CURSER_OFF 0x00 +#define R7_CURSER_ON 0x40 + +#define R7_STATUS_BOTTOM 0x00 +#define R7_STATUS_TOP 0x80 + +/* Register R8 (Active chapter) */ +#define R8_ACTIVE_CHAPTER_0 0x00 +#define R8_ACTIVE_CHAPTER_1 0x01 +#define R8_ACTIVE_CHAPTER_2 0x02 +#define R8_ACTIVE_CHAPTER_3 0x03 +#define R8_ACTIVE_CHAPTER_4 0x04 +#define R8_ACTIVE_CHAPTER_5 0x05 +#define R8_ACTIVE_CHAPTER_6 0x06 +#define R8_ACTIVE_CHAPTER_7 0x07 + +#define R8_CLEAR_MEMORY 0x08 +#define R8_DO_NOT_CLEAR_MEMORY 0x00 + +/* Register R9 (Curser row) */ +#define R9_CURSER_ROW_0 0x00 +#define R9_CURSER_ROW_1 0x01 +#define R9_CURSER_ROW_2 0x02 +#define R9_CURSER_ROW_25 0x19 + +/* Register R10 (Curser column) */ +#define R10_CURSER_COLUMN_0 0x00 +#define R10_CURSER_COLUMN_6 0x06 +#define R10_CURSER_COLUMN_8 0x08 + +/*****************************************************************************/ +/* Row 25 control data in column 0 to 9 */ +/*****************************************************************************/ +#define ROW25_COLUMN0_PAGE_UNITS 0x0F + +#define ROW25_COLUMN1_PAGE_TENS 0x0F + +#define ROW25_COLUMN2_MINUTES_UNITS 0x0F -static struct i2c_driver i2c_driver_videotext = +#define ROW25_COLUMN3_MINUTES_TENS 0x07 +#define ROW25_COLUMN3_DELETE_PAGE 0x08 + +#define ROW25_COLUMN4_HOUR_UNITS 0x0F + +#define ROW25_COLUMN5_HOUR_TENS 0x03 +#define ROW25_COLUMN5_INSERT_HEADLINE 0x04 +#define ROW25_COLUMN5_INSERT_SUBTITLE 0x08 + +#define ROW25_COLUMN6_SUPPRESS_HEADER 0x01 +#define ROW25_COLUMN6_UPDATE_PAGE 0x02 +#define ROW25_COLUMN6_INTERRUPTED_SEQUENCE 0x04 +#define ROW25_COLUMN6_SUPPRESS_DISPLAY 0x08 + +#define ROW25_COLUMN7_SERIAL_MODE 0x01 +#define ROW25_COLUMN7_CHARACTER_SET 0x0E + +#define ROW25_COLUMN8_PAGE_HUNDREDS 0x07 +#define ROW25_COLUMN8_PAGE_NOT_FOUND 0x10 + +#define ROW25_COLUMN9_PAGE_BEING_LOOKED_FOR 0x20 + +#define ROW25_COLUMN0_TO_7_HAMMING_ERROR 0x10 + +/*****************************************************************************/ +/* Helper macros for extracting page, hour and minute digits */ +/*****************************************************************************/ +/* BYTE_POS 0 is at row 0, column 0, + BYTE_POS 1 is at row 0, column 1, + BYTE_POS 40 is at row 1, column 0, (with NUM_ROWS_PER_PAGE = 40) + BYTE_POS 41 is at row 1, column 1, (with NUM_ROWS_PER_PAGE = 40), + ... */ +#define ROW(BYTE_POS) (BYTE_POS / NUM_ROWS_PER_PAGE) +#define COLUMN(BYTE_POS) (BYTE_POS % NUM_ROWS_PER_PAGE) + +/*****************************************************************************/ +/* Helper macros for extracting page, hour and minute digits */ +/*****************************************************************************/ +/* Macros for extracting hundreds, tens and units of a page number which + must be in the range 0 ... 0x799. + Note that page is coded in hexadecimal, i.e. 0x123 means page 123. + page 0x.. means page 8.. */ +#define HUNDREDS_OF_PAGE(page) (((page) / 0x100) & 0x7) +#define TENS_OF_PAGE(page) (((page) / 0x10) & 0xF) +#define UNITS_OF_PAGE(page) ((page) & 0xF) + +/* Macros for extracting tens and units of a hour information which + must be in the range 0 ... 0x24. + Note that hour is coded in hexadecimal, i.e. 0x12 means 12 hours */ +#define TENS_OF_HOUR(hour) ((hour) / 0x10) +#define UNITS_OF_HOUR(hour) ((hour) & 0xF) + +/* Macros for extracting tens and units of a minute information which + must be in the range 0 ... 0x59. + Note that minute is coded in hexadecimal, i.e. 0x12 means 12 minutes */ +#define TENS_OF_MINUTE(minute) ((minute) / 0x10) +#define UNITS_OF_MINUTE(minute) ((minute) & 0xF) + +#define HOUR_MAX 0x23 +#define MINUTE_MAX 0x59 +#define PAGE_MAX 0x8FF + + +struct saa5246a_device { - .driver = { - .name = IF_NAME, /* name */ - }, - .id = I2C_DRIVERID_SAA5249, /* in i2c.h */ - .attach_adapter = saa5246a_probe, - .detach_client = saa5246a_detach, + u8 pgbuf[NUM_DAUS][VTX_VIRTUALSIZE]; + int is_searching[NUM_DAUS]; + struct i2c_client *client; + unsigned long in_use; + struct mutex lock; }; -static struct i2c_client client_template = { - .driver = &i2c_driver_videotext, - .name = "(unset)", -}; +static struct video_device saa_template; /* Declared near bottom */ + +/* + * I2C interfaces + */ static int i2c_sendbuf(struct saa5246a_device *t, int reg, int count, u8 *data) { @@ -579,8 +807,8 @@ static inline int saa5246a_stop_dau(struct saa5246a_device *t, static int do_saa5246a_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t=vd->priv; + struct saa5246a_device *t = video_drvdata(file); + switch(cmd) { case VTXIOCGETINFO: @@ -720,8 +948,7 @@ static inline unsigned int vtx_fix_command(unsigned int cmd) static int saa5246a_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = vd->priv; + struct saa5246a_device *t = video_drvdata(file); int err; cmd = vtx_fix_command(cmd); @@ -733,21 +960,15 @@ static int saa5246a_ioctl(struct inode *inode, struct file *file, static int saa5246a_open(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = vd->priv; - int err; + struct saa5246a_device *t = video_drvdata(file); - err = video_exclusive_open(inode,file); - if (err < 0) - return err; + if (t->client == NULL) + return -ENODEV; - if (t->client==NULL) { - err = -ENODEV; - goto fail; - } + if (test_and_set_bit(0, &t->in_use)) + return -EBUSY; if (i2c_senddata(t, SAA5246A_REGISTER_R0, - R0_SELECT_R11 | R0_PLL_TIME_CONSTANT_LONG | R0_ENABLE_nODD_EVEN_OUTPUT | @@ -773,21 +994,15 @@ static int saa5246a_open(struct inode *inode, struct file *file) COMMAND_END)) { - err = -EIO; - goto fail; + clear_bit(0, &t->in_use); + return -EIO; } - return 0; - -fail: - video_exclusive_release(inode,file); - return err; } static int saa5246a_release(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = vd->priv; + struct saa5246a_device *t = video_drvdata(file); /* Stop all acquisition circuits. */ i2c_senddata(t, SAA5246A_REGISTER_R1, @@ -800,26 +1015,10 @@ static int saa5246a_release(struct inode *inode, struct file *file) R1_VCS_TO_SCS, COMMAND_END); - video_exclusive_release(inode,file); + clear_bit(0, &t->in_use); return 0; } -static int __init init_saa_5246a (void) -{ - printk(KERN_INFO - "SAA5246A (or compatible) Teletext decoder driver version %d.%d\n", - MAJOR_VERSION, MINOR_VERSION); - return i2c_add_driver(&i2c_driver_videotext); -} - -static void __exit cleanup_saa_5246a (void) -{ - i2c_del_driver(&i2c_driver_videotext); -} - -module_init(init_saa_5246a); -module_exit(cleanup_saa_5246a); - static const struct file_operations saa_fops = { .owner = THIS_MODULE, .open = saa5246a_open, @@ -830,8 +1029,79 @@ static const struct file_operations saa_fops = { static struct video_device saa_template = { - .name = IF_NAME, + .name = "saa5246a", .fops = &saa_fops, .release = video_device_release, .minor = -1, }; + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + +static int saa5246a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int pgbuf; + int err; + struct video_device *vd; + struct saa5246a_device *t; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + v4l_info(client, "VideoText version %d.%d\n", + MAJOR_VERSION, MINOR_VERSION); + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (t == NULL) + return -ENOMEM; + mutex_init(&t->lock); + + /* Now create a video4linux device */ + vd = video_device_alloc(); + if (vd == NULL) { + kfree(t); + return -ENOMEM; + } + i2c_set_clientdata(client, vd); + memcpy(vd, &saa_template, sizeof(*vd)); + + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { + memset(t->pgbuf[pgbuf], ' ', sizeof(t->pgbuf[0])); + t->is_searching[pgbuf] = false; + } + video_set_drvdata(vd, t); + + /* Register it */ + err = video_register_device(vd, VFL_TYPE_VTX, -1); + if (err < 0) { + kfree(t); + video_device_release(vd); + return err; + } + t->client = client; + return 0; +} + +static int saa5246a_remove(struct i2c_client *client) +{ + struct video_device *vd = i2c_get_clientdata(client); + + video_unregister_device(vd); + kfree(video_get_drvdata(vd)); + return 0; +} + +static const struct i2c_device_id saa5246a_id[] = { + { "saa5246a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa5246a_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa5246a", + .driverid = I2C_DRIVERID_SAA5249, + .probe = saa5246a_probe, + .remove = saa5246a_remove, + .id_table = saa5246a_id, +}; diff --git a/drivers/media/video/saa5246a.h b/drivers/media/video/saa5246a.h deleted file mode 100644 index 64394c036c6..00000000000 --- a/drivers/media/video/saa5246a.h +++ /dev/null @@ -1,359 +0,0 @@ -/* - Driver for the SAA5246A or SAA5281 Teletext (=Videotext) decoder chips from - Philips. - - Copyright (C) 2004 Michael Geng (linux@MichaelGeng.de) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - */ -#ifndef __SAA5246A_H__ -#define __SAA5246A_H__ - -#define MAJOR_VERSION 1 /* driver major version number */ -#define MINOR_VERSION 8 /* driver minor version number */ - -#define IF_NAME "SAA5246A" - -#define I2C_ADDRESS 17 - -/* Number of DAUs = number of pages that can be searched at the same time. */ -#define NUM_DAUS 4 - -#define NUM_ROWS_PER_PAGE 40 - -/* first column is 0 (not 1) */ -#define POS_TIME_START 32 -#define POS_TIME_END 39 - -#define POS_HEADER_START 7 -#define POS_HEADER_END 31 - -/* Returns 'true' if the part of the videotext page described with req contains - (at least parts of) the time field */ -#define REQ_CONTAINS_TIME(p_req) \ - ((p_req)->start <= POS_TIME_END && \ - (p_req)->end >= POS_TIME_START) - -/* Returns 'true' if the part of the videotext page described with req contains - (at least parts of) the page header */ -#define REQ_CONTAINS_HEADER(p_req) \ - ((p_req)->start <= POS_HEADER_END && \ - (p_req)->end >= POS_HEADER_START) - -/*****************************************************************************/ -/* Mode register numbers of the SAA5246A */ -/*****************************************************************************/ -#define SAA5246A_REGISTER_R0 0 -#define SAA5246A_REGISTER_R1 1 -#define SAA5246A_REGISTER_R2 2 -#define SAA5246A_REGISTER_R3 3 -#define SAA5246A_REGISTER_R4 4 -#define SAA5246A_REGISTER_R5 5 -#define SAA5246A_REGISTER_R6 6 -#define SAA5246A_REGISTER_R7 7 -#define SAA5246A_REGISTER_R8 8 -#define SAA5246A_REGISTER_R9 9 -#define SAA5246A_REGISTER_R10 10 -#define SAA5246A_REGISTER_R11 11 -#define SAA5246A_REGISTER_R11B 11 - -/* SAA5246A mode registers often autoincrement to the next register. - Therefore we use variable argument lists. The following macro indicates - the end of a command list. */ -#define COMMAND_END (- 1) - -/*****************************************************************************/ -/* Contents of the mode registers of the SAA5246A */ -/*****************************************************************************/ -/* Register R0 (Advanced Control) */ -#define R0_SELECT_R11 0x00 -#define R0_SELECT_R11B 0x01 - -#define R0_PLL_TIME_CONSTANT_LONG 0x00 -#define R0_PLL_TIME_CONSTANT_SHORT 0x02 - -#define R0_ENABLE_nODD_EVEN_OUTPUT 0x00 -#define R0_DISABLE_nODD_EVEN_OUTPUT 0x04 - -#define R0_ENABLE_HDR_POLL 0x00 -#define R0_DISABLE_HDR_POLL 0x10 - -#define R0_DO_NOT_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x00 -#define R0_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x20 - -#define R0_NO_FREE_RUN_PLL 0x00 -#define R0_FREE_RUN_PLL 0x40 - -#define R0_NO_AUTOMATIC_FASTEXT_PROMPT 0x00 -#define R0_AUTOMATIC_FASTEXT_PROMPT 0x80 - -/* Register R1 (Mode) */ -#define R1_INTERLACED_312_AND_HALF_312_AND_HALF_LINES 0x00 -#define R1_NON_INTERLACED_312_313_LINES 0x01 -#define R1_NON_INTERLACED_312_312_LINES 0x02 -#define R1_FFB_LEADING_EDGE_IN_FIRST_BROAD_PULSE 0x03 -#define R1_FFB_LEADING_EDGE_IN_SECOND_BROAD_PULSE 0x07 - -#define R1_DEW 0x00 -#define R1_FULL_FIELD 0x08 - -#define R1_EXTENDED_PACKET_DISABLE 0x00 -#define R1_EXTENDED_PACKET_ENABLE 0x10 - -#define R1_DAUS_ALL_ON 0x00 -#define R1_DAUS_ALL_OFF 0x20 - -#define R1_7_BITS_PLUS_PARITY 0x00 -#define R1_8_BITS_NO_PARITY 0x40 - -#define R1_VCS_TO_SCS 0x00 -#define R1_NO_VCS_TO_SCS 0x80 - -/* Register R2 (Page request address) */ -#define R2_IN_R3_SELECT_PAGE_HUNDREDS 0x00 -#define R2_IN_R3_SELECT_PAGE_TENS 0x01 -#define R2_IN_R3_SELECT_PAGE_UNITS 0x02 -#define R2_IN_R3_SELECT_HOURS_TENS 0x03 -#define R2_IN_R3_SELECT_HOURS_UNITS 0x04 -#define R2_IN_R3_SELECT_MINUTES_TENS 0x05 -#define R2_IN_R3_SELECT_MINUTES_UNITS 0x06 - -#define R2_DAU_0 0x00 -#define R2_DAU_1 0x10 -#define R2_DAU_2 0x20 -#define R2_DAU_3 0x30 - -#define R2_BANK_0 0x00 -#define R2_BANK 1 0x40 - -#define R2_HAMMING_CHECK_ON 0x80 -#define R2_HAMMING_CHECK_OFF 0x00 - -/* Register R3 (Page request data) */ -#define R3_PAGE_HUNDREDS_0 0x00 -#define R3_PAGE_HUNDREDS_1 0x01 -#define R3_PAGE_HUNDREDS_2 0x02 -#define R3_PAGE_HUNDREDS_3 0x03 -#define R3_PAGE_HUNDREDS_4 0x04 -#define R3_PAGE_HUNDREDS_5 0x05 -#define R3_PAGE_HUNDREDS_6 0x06 -#define R3_PAGE_HUNDREDS_7 0x07 - -#define R3_HOLD_PAGE 0x00 -#define R3_UPDATE_PAGE 0x08 - -#define R3_PAGE_HUNDREDS_DO_NOT_CARE 0x00 -#define R3_PAGE_HUNDREDS_DO_CARE 0x10 - -#define R3_PAGE_TENS_DO_NOT_CARE 0x00 -#define R3_PAGE_TENS_DO_CARE 0x10 - -#define R3_PAGE_UNITS_DO_NOT_CARE 0x00 -#define R3_PAGE_UNITS_DO_CARE 0x10 - -#define R3_HOURS_TENS_DO_NOT_CARE 0x00 -#define R3_HOURS_TENS_DO_CARE 0x10 - -#define R3_HOURS_UNITS_DO_NOT_CARE 0x00 -#define R3_HOURS_UNITS_DO_CARE 0x10 - -#define R3_MINUTES_TENS_DO_NOT_CARE 0x00 -#define R3_MINUTES_TENS_DO_CARE 0x10 - -#define R3_MINUTES_UNITS_DO_NOT_CARE 0x00 -#define R3_MINUTES_UNITS_DO_CARE 0x10 - -/* Register R4 (Display chapter) */ -#define R4_DISPLAY_PAGE_0 0x00 -#define R4_DISPLAY_PAGE_1 0x01 -#define R4_DISPLAY_PAGE_2 0x02 -#define R4_DISPLAY_PAGE_3 0x03 -#define R4_DISPLAY_PAGE_4 0x04 -#define R4_DISPLAY_PAGE_5 0x05 -#define R4_DISPLAY_PAGE_6 0x06 -#define R4_DISPLAY_PAGE_7 0x07 - -/* Register R5 (Normal display control) */ -#define R5_PICTURE_INSIDE_BOXING_OFF 0x00 -#define R5_PICTURE_INSIDE_BOXING_ON 0x01 - -#define R5_PICTURE_OUTSIDE_BOXING_OFF 0x00 -#define R5_PICTURE_OUTSIDE_BOXING_ON 0x02 - -#define R5_TEXT_INSIDE_BOXING_OFF 0x00 -#define R5_TEXT_INSIDE_BOXING_ON 0x04 - -#define R5_TEXT_OUTSIDE_BOXING_OFF 0x00 -#define R5_TEXT_OUTSIDE_BOXING_ON 0x08 - -#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 -#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 - -#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 -#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 - -#define R5_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 -#define R5_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 - -#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 -#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 - -/* Register R6 (Newsflash display) */ -#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_ON 0x01 - -#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_ON 0x02 - -#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_ON 0x04 - -#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_ON 0x08 - -#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 - -#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 - -#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 - -#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 - -/* Register R7 (Display mode) */ -#define R7_BOX_OFF_ROW_0 0x00 -#define R7_BOX_ON_ROW_0 0x01 - -#define R7_BOX_OFF_ROW_1_TO_23 0x00 -#define R7_BOX_ON_ROW_1_TO_23 0x02 - -#define R7_BOX_OFF_ROW_24 0x00 -#define R7_BOX_ON_ROW_24 0x04 - -#define R7_SINGLE_HEIGHT 0x00 -#define R7_DOUBLE_HEIGHT 0x08 - -#define R7_TOP_HALF 0x00 -#define R7_BOTTOM_HALF 0x10 - -#define R7_REVEAL_OFF 0x00 -#define R7_REVEAL_ON 0x20 - -#define R7_CURSER_OFF 0x00 -#define R7_CURSER_ON 0x40 - -#define R7_STATUS_BOTTOM 0x00 -#define R7_STATUS_TOP 0x80 - -/* Register R8 (Active chapter) */ -#define R8_ACTIVE_CHAPTER_0 0x00 -#define R8_ACTIVE_CHAPTER_1 0x01 -#define R8_ACTIVE_CHAPTER_2 0x02 -#define R8_ACTIVE_CHAPTER_3 0x03 -#define R8_ACTIVE_CHAPTER_4 0x04 -#define R8_ACTIVE_CHAPTER_5 0x05 -#define R8_ACTIVE_CHAPTER_6 0x06 -#define R8_ACTIVE_CHAPTER_7 0x07 - -#define R8_CLEAR_MEMORY 0x08 -#define R8_DO_NOT_CLEAR_MEMORY 0x00 - -/* Register R9 (Curser row) */ -#define R9_CURSER_ROW_0 0x00 -#define R9_CURSER_ROW_1 0x01 -#define R9_CURSER_ROW_2 0x02 -#define R9_CURSER_ROW_25 0x19 - -/* Register R10 (Curser column) */ -#define R10_CURSER_COLUMN_0 0x00 -#define R10_CURSER_COLUMN_6 0x06 -#define R10_CURSER_COLUMN_8 0x08 - -/*****************************************************************************/ -/* Row 25 control data in column 0 to 9 */ -/*****************************************************************************/ -#define ROW25_COLUMN0_PAGE_UNITS 0x0F - -#define ROW25_COLUMN1_PAGE_TENS 0x0F - -#define ROW25_COLUMN2_MINUTES_UNITS 0x0F - -#define ROW25_COLUMN3_MINUTES_TENS 0x07 -#define ROW25_COLUMN3_DELETE_PAGE 0x08 - -#define ROW25_COLUMN4_HOUR_UNITS 0x0F - -#define ROW25_COLUMN5_HOUR_TENS 0x03 -#define ROW25_COLUMN5_INSERT_HEADLINE 0x04 -#define ROW25_COLUMN5_INSERT_SUBTITLE 0x08 - -#define ROW25_COLUMN6_SUPPRESS_HEADER 0x01 -#define ROW25_COLUMN6_UPDATE_PAGE 0x02 -#define ROW25_COLUMN6_INTERRUPTED_SEQUENCE 0x04 -#define ROW25_COLUMN6_SUPPRESS_DISPLAY 0x08 - -#define ROW25_COLUMN7_SERIAL_MODE 0x01 -#define ROW25_COLUMN7_CHARACTER_SET 0x0E - -#define ROW25_COLUMN8_PAGE_HUNDREDS 0x07 -#define ROW25_COLUMN8_PAGE_NOT_FOUND 0x10 - -#define ROW25_COLUMN9_PAGE_BEING_LOOKED_FOR 0x20 - -#define ROW25_COLUMN0_TO_7_HAMMING_ERROR 0x10 - -/*****************************************************************************/ -/* Helper macros for extracting page, hour and minute digits */ -/*****************************************************************************/ -/* BYTE_POS 0 is at row 0, column 0, - BYTE_POS 1 is at row 0, column 1, - BYTE_POS 40 is at row 1, column 0, (with NUM_ROWS_PER_PAGE = 40) - BYTE_POS 41 is at row 1, column 1, (with NUM_ROWS_PER_PAGE = 40), - ... */ -#define ROW(BYTE_POS) (BYTE_POS / NUM_ROWS_PER_PAGE) -#define COLUMN(BYTE_POS) (BYTE_POS % NUM_ROWS_PER_PAGE) - -/*****************************************************************************/ -/* Helper macros for extracting page, hour and minute digits */ -/*****************************************************************************/ -/* Macros for extracting hundreds, tens and units of a page number which - must be in the range 0 ... 0x799. - Note that page is coded in hexadecimal, i.e. 0x123 means page 123. - page 0x.. means page 8.. */ -#define HUNDREDS_OF_PAGE(page) (((page) / 0x100) & 0x7) -#define TENS_OF_PAGE(page) (((page) / 0x10) & 0xF) -#define UNITS_OF_PAGE(page) ((page) & 0xF) - -/* Macros for extracting tens and units of a hour information which - must be in the range 0 ... 0x24. - Note that hour is coded in hexadecimal, i.e. 0x12 means 12 hours */ -#define TENS_OF_HOUR(hour) ((hour) / 0x10) -#define UNITS_OF_HOUR(hour) ((hour) & 0xF) - -/* Macros for extracting tens and units of a minute information which - must be in the range 0 ... 0x59. - Note that minute is coded in hexadecimal, i.e. 0x12 means 12 minutes */ -#define TENS_OF_MINUTE(minute) ((minute) / 0x10) -#define UNITS_OF_MINUTE(minute) ((minute) & 0xF) - -#define HOUR_MAX 0x23 -#define MINUTE_MAX 0x59 -#define PAGE_MAX 0x8FF - -#endif /* __SAA5246A_H__ */ diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 0d639738d4e..3bb959c25d9 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -15,8 +15,6 @@ * * Copyright (c) 1998 Richard Guenther <richard.guenther@student.uni-tuebingen.de> * - * $Id: saa5249.c,v 1.1 1998/03/30 22:23:23 alan Exp $ - * * Derived From * * vtx.c: @@ -45,33 +43,28 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/mm.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/slab.h> #include <linux/init.h> -#include <stdarg.h> #include <linux/i2c.h> +#include <linux/smp_lock.h> +#include <linux/mutex.h> +#include <linux/delay.h> #include <linux/videotext.h> #include <linux/videodev.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> -#include <linux/mutex.h> - +#include <media/v4l2-i2c-drv-legacy.h> -#include <asm/io.h> -#include <asm/uaccess.h> +MODULE_AUTHOR("Michael Geng <linux@MichaelGeng.de>"); +MODULE_DESCRIPTION("Philips SAA5249 Teletext decoder driver"); +MODULE_LICENSE("GPL"); #define VTX_VER_MAJ 1 #define VTX_VER_MIN 8 - #define NUM_DAUS 4 #define NUM_BUFS 8 -#define IF_NAME "SAA5249" static const int disp_modes[8][3] = { @@ -109,6 +102,7 @@ struct saa5249_device int disp_mode; int virtual_mode; struct i2c_client *client; + unsigned long in_use; struct mutex lock; }; @@ -123,125 +117,8 @@ struct saa5249_device #define VTX_DEV_MINOR 0 -/* General defines and debugging support */ - -#define RESCHED do { cond_resched(); } while(0) - static struct video_device saa_template; /* Declared near bottom */ -/* Addresses to scan */ -static unsigned short normal_i2c[] = {34>>1,I2C_CLIENT_END}; - -I2C_CLIENT_INSMOD; - -static struct i2c_client client_template; - -static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) -{ - int pgbuf; - int err; - struct i2c_client *client; - struct video_device *vd; - struct saa5249_device *t; - - printk(KERN_INFO "saa5249: teletext chip found.\n"); - client=kmalloc(sizeof(*client), GFP_KERNEL); - if(client==NULL) - return -ENOMEM; - client_template.adapter = adap; - client_template.addr = addr; - memcpy(client, &client_template, sizeof(*client)); - t = kzalloc(sizeof(*t), GFP_KERNEL); - if(t==NULL) - { - kfree(client); - return -ENOMEM; - } - strlcpy(client->name, IF_NAME, I2C_NAME_SIZE); - mutex_init(&t->lock); - - /* - * Now create a video4linux device - */ - - vd = kmalloc(sizeof(struct video_device), GFP_KERNEL); - if(vd==NULL) - { - kfree(t); - kfree(client); - return -ENOMEM; - } - i2c_set_clientdata(client, vd); - memcpy(vd, &saa_template, sizeof(*vd)); - - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) - { - memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); - memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); - memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat)); - t->vdau[pgbuf].expire = 0; - t->vdau[pgbuf].clrfound = true; - t->vdau[pgbuf].stopped = true; - t->is_searching[pgbuf] = false; - } - vd->priv=t; - - - /* - * Register it - */ - - if((err=video_register_device(vd, VFL_TYPE_VTX,-1))<0) - { - kfree(t); - kfree(vd); - kfree(client); - return err; - } - t->client = client; - i2c_attach_client(client); - return 0; -} - -/* - * We do most of the hard work when we become a device on the i2c. - */ - -static int saa5249_probe(struct i2c_adapter *adap) -{ - if (adap->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adap, &addr_data, saa5249_attach); - return 0; -} - -static int saa5249_detach(struct i2c_client *client) -{ - struct video_device *vd = i2c_get_clientdata(client); - i2c_detach_client(client); - video_unregister_device(vd); - kfree(vd->priv); - kfree(vd); - kfree(client); - return 0; -} - -/* new I2C driver support */ - -static struct i2c_driver i2c_driver_videotext = -{ - .driver = { - .name = IF_NAME, /* name */ - }, - .id = I2C_DRIVERID_SAA5249, /* in i2c.h */ - .attach_adapter = saa5249_probe, - .detach_client = saa5249_detach, -}; - -static struct i2c_client client_template = { - .driver = &i2c_driver_videotext, - .name = "(unset)", -}; - /* * Wait the given number of jiffies (10ms). This calls the scheduler, so the actual * delay may be longer. @@ -275,7 +152,7 @@ static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data) buf[0] = reg; memcpy(buf+1, data, count); - if(i2c_master_send(t->client, buf, count+1)==count+1) + if (i2c_master_send(t->client, buf, count + 1) == count + 1) return 0; return -1; } @@ -317,246 +194,236 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { static int virtual_mode = false; - struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; + struct saa5249_device *t = video_drvdata(file); - switch(cmd) + switch (cmd) { + case VTXIOCGETINFO: { - case VTXIOCGETINFO: - { - vtx_info_t *info = arg; - info->version_major = VTX_VER_MAJ; - info->version_minor = VTX_VER_MIN; - info->numpages = NUM_DAUS; - /*info->cct_type = CCT_TYPE;*/ - return 0; - } + vtx_info_t *info = arg; + info->version_major = VTX_VER_MAJ; + info->version_minor = VTX_VER_MIN; + info->numpages = NUM_DAUS; + /*info->cct_type = CCT_TYPE;*/ + return 0; + } - case VTXIOCCLRPAGE: - { - vtx_pagereq_t *req = arg; + case VTXIOCCLRPAGE: + { + vtx_pagereq_t *req = arg; - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); - t->vdau[req->pgbuf].clrfound = true; - return 0; - } + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); + t->vdau[req->pgbuf].clrfound = true; + return 0; + } - case VTXIOCCLRFOUND: - { - vtx_pagereq_t *req = arg; + case VTXIOCCLRFOUND: + { + vtx_pagereq_t *req = arg; - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - t->vdau[req->pgbuf].clrfound = true; - return 0; - } + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + t->vdau[req->pgbuf].clrfound = true; + return 0; + } - case VTXIOCPAGEREQ: - { - vtx_pagereq_t *req = arg; - if (!(req->pagemask & PGMASK_PAGE)) - req->page = 0; - if (!(req->pagemask & PGMASK_HOUR)) - req->hour = 0; - if (!(req->pagemask & PGMASK_MINUTE)) - req->minute = 0; - if (req->page < 0 || req->page > 0x8ff) /* 7FF ?? */ - return -EINVAL; - req->page &= 0x7ff; - if (req->hour < 0 || req->hour > 0x3f || req->minute < 0 || req->minute > 0x7f || - req->pagemask < 0 || req->pagemask >= PGMASK_MAX || req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - t->vdau[req->pgbuf].sregs[0] = (req->pagemask & PG_HUND ? 0x10 : 0) | (req->page / 0x100); - t->vdau[req->pgbuf].sregs[1] = (req->pagemask & PG_TEN ? 0x10 : 0) | ((req->page / 0x10) & 0xf); - t->vdau[req->pgbuf].sregs[2] = (req->pagemask & PG_UNIT ? 0x10 : 0) | (req->page & 0xf); - t->vdau[req->pgbuf].sregs[3] = (req->pagemask & HR_TEN ? 0x10 : 0) | (req->hour / 0x10); - t->vdau[req->pgbuf].sregs[4] = (req->pagemask & HR_UNIT ? 0x10 : 0) | (req->hour & 0xf); - t->vdau[req->pgbuf].sregs[5] = (req->pagemask & MIN_TEN ? 0x10 : 0) | (req->minute / 0x10); - t->vdau[req->pgbuf].sregs[6] = (req->pagemask & MIN_UNIT ? 0x10 : 0) | (req->minute & 0xf); - t->vdau[req->pgbuf].stopped = false; - t->vdau[req->pgbuf].clrfound = true; - t->is_searching[req->pgbuf] = true; - return 0; - } + case VTXIOCPAGEREQ: + { + vtx_pagereq_t *req = arg; + if (!(req->pagemask & PGMASK_PAGE)) + req->page = 0; + if (!(req->pagemask & PGMASK_HOUR)) + req->hour = 0; + if (!(req->pagemask & PGMASK_MINUTE)) + req->minute = 0; + if (req->page < 0 || req->page > 0x8ff) /* 7FF ?? */ + return -EINVAL; + req->page &= 0x7ff; + if (req->hour < 0 || req->hour > 0x3f || req->minute < 0 || req->minute > 0x7f || + req->pagemask < 0 || req->pagemask >= PGMASK_MAX || req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + t->vdau[req->pgbuf].sregs[0] = (req->pagemask & PG_HUND ? 0x10 : 0) | (req->page / 0x100); + t->vdau[req->pgbuf].sregs[1] = (req->pagemask & PG_TEN ? 0x10 : 0) | ((req->page / 0x10) & 0xf); + t->vdau[req->pgbuf].sregs[2] = (req->pagemask & PG_UNIT ? 0x10 : 0) | (req->page & 0xf); + t->vdau[req->pgbuf].sregs[3] = (req->pagemask & HR_TEN ? 0x10 : 0) | (req->hour / 0x10); + t->vdau[req->pgbuf].sregs[4] = (req->pagemask & HR_UNIT ? 0x10 : 0) | (req->hour & 0xf); + t->vdau[req->pgbuf].sregs[5] = (req->pagemask & MIN_TEN ? 0x10 : 0) | (req->minute / 0x10); + t->vdau[req->pgbuf].sregs[6] = (req->pagemask & MIN_UNIT ? 0x10 : 0) | (req->minute & 0xf); + t->vdau[req->pgbuf].stopped = false; + t->vdau[req->pgbuf].clrfound = true; + t->is_searching[req->pgbuf] = true; + return 0; + } - case VTXIOCGETSTAT: - { - vtx_pagereq_t *req = arg; - u8 infobits[10]; - vtx_pageinfo_t info; - int a; - - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - if (!t->vdau[req->pgbuf].stopped) - { - if (i2c_senddata(t, 2, 0, -1) || - i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) || - i2c_senddata(t, 8, 0, 25, 0, ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', -1) || - i2c_senddata(t, 2, 0, t->vdau[req->pgbuf].sregs[0] | 8, -1) || - i2c_senddata(t, 8, 0, 25, 0, -1)) - return -EIO; - jdelay(PAGE_WAIT); - if (i2c_getdata(t, 10, infobits)) - return -EIO; + case VTXIOCGETSTAT: + { + vtx_pagereq_t *req = arg; + u8 infobits[10]; + vtx_pageinfo_t info; + int a; + + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + if (!t->vdau[req->pgbuf].stopped) { + if (i2c_senddata(t, 2, 0, -1) || + i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) || + i2c_senddata(t, 8, 0, 25, 0, ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', -1) || + i2c_senddata(t, 2, 0, t->vdau[req->pgbuf].sregs[0] | 8, -1) || + i2c_senddata(t, 8, 0, 25, 0, -1)) + return -EIO; + jdelay(PAGE_WAIT); + if (i2c_getdata(t, 10, infobits)) + return -EIO; - if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) && /* check FOUND-bit */ - (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || - time_after_eq(jiffies, t->vdau[req->pgbuf].expire))) - { /* check if new page arrived */ - if (i2c_senddata(t, 8, 0, 0, 0, -1) || - i2c_getdata(t, VTX_PAGESIZE, t->vdau[req->pgbuf].pgbuf)) + if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) && /* check FOUND-bit */ + (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || + time_after_eq(jiffies, t->vdau[req->pgbuf].expire))) + { /* check if new page arrived */ + if (i2c_senddata(t, 8, 0, 0, 0, -1) || + i2c_getdata(t, VTX_PAGESIZE, t->vdau[req->pgbuf].pgbuf)) + return -EIO; + t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE; + memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE); + if (t->virtual_mode) { + /* Packet X/24 */ + if (i2c_senddata(t, 8, 0, 0x20, 0, -1) || + i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 20 * 40)) + return -EIO; + /* Packet X/27/0 */ + if (i2c_senddata(t, 8, 0, 0x21, 0, -1) || + i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 16 * 40)) + return -EIO; + /* Packet 8/30/0...8/30/15 + * FIXME: AFAIK, the 5249 does hamming-decoding for some bytes in packet 8/30, + * so we should undo this here. + */ + if (i2c_senddata(t, 8, 0, 0x22, 0, -1) || + i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 23 * 40)) return -EIO; - t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE; - memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE); - if (t->virtual_mode) - { - /* Packet X/24 */ - if (i2c_senddata(t, 8, 0, 0x20, 0, -1) || - i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 20 * 40)) - return -EIO; - /* Packet X/27/0 */ - if (i2c_senddata(t, 8, 0, 0x21, 0, -1) || - i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 16 * 40)) - return -EIO; - /* Packet 8/30/0...8/30/15 - * FIXME: AFAIK, the 5249 does hamming-decoding for some bytes in packet 8/30, - * so we should undo this here. - */ - if (i2c_senddata(t, 8, 0, 0x22, 0, -1) || - i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 23 * 40)) - return -EIO; - } - t->vdau[req->pgbuf].clrfound = false; - memcpy(t->vdau[req->pgbuf].laststat, infobits, sizeof(infobits)); - } - else - { - memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)); } - } - else - { + t->vdau[req->pgbuf].clrfound = false; + memcpy(t->vdau[req->pgbuf].laststat, infobits, sizeof(infobits)); + } else { memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)); } + } else { + memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)); + } - info.pagenum = ((infobits[8] << 8) & 0x700) | ((infobits[1] << 4) & 0xf0) | (infobits[0] & 0x0f); - if (info.pagenum < 0x100) - info.pagenum += 0x800; - info.hour = ((infobits[5] << 4) & 0x30) | (infobits[4] & 0x0f); - info.minute = ((infobits[3] << 4) & 0x70) | (infobits[2] & 0x0f); - info.charset = ((infobits[7] >> 1) & 7); - info.delete = !!(infobits[3] & 8); - info.headline = !!(infobits[5] & 4); - info.subtitle = !!(infobits[5] & 8); - info.supp_header = !!(infobits[6] & 1); - info.update = !!(infobits[6] & 2); - info.inter_seq = !!(infobits[6] & 4); - info.dis_disp = !!(infobits[6] & 8); - info.serial = !!(infobits[7] & 1); - info.notfound = !!(infobits[8] & 0x10); - info.pblf = !!(infobits[9] & 0x20); - info.hamming = 0; - for (a = 0; a <= 7; a++) - { - if (infobits[a] & 0xf0) - { - info.hamming = 1; - break; - } - } - if (t->vdau[req->pgbuf].clrfound) - info.notfound = 1; - if(copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t))) - return -EFAULT; - if (!info.hamming && !info.notfound) - { - t->is_searching[req->pgbuf] = false; + info.pagenum = ((infobits[8] << 8) & 0x700) | ((infobits[1] << 4) & 0xf0) | (infobits[0] & 0x0f); + if (info.pagenum < 0x100) + info.pagenum += 0x800; + info.hour = ((infobits[5] << 4) & 0x30) | (infobits[4] & 0x0f); + info.minute = ((infobits[3] << 4) & 0x70) | (infobits[2] & 0x0f); + info.charset = ((infobits[7] >> 1) & 7); + info.delete = !!(infobits[3] & 8); + info.headline = !!(infobits[5] & 4); + info.subtitle = !!(infobits[5] & 8); + info.supp_header = !!(infobits[6] & 1); + info.update = !!(infobits[6] & 2); + info.inter_seq = !!(infobits[6] & 4); + info.dis_disp = !!(infobits[6] & 8); + info.serial = !!(infobits[7] & 1); + info.notfound = !!(infobits[8] & 0x10); + info.pblf = !!(infobits[9] & 0x20); + info.hamming = 0; + for (a = 0; a <= 7; a++) { + if (infobits[a] & 0xf0) { + info.hamming = 1; + break; } - return 0; } + if (t->vdau[req->pgbuf].clrfound) + info.notfound = 1; + if (copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t))) + return -EFAULT; + if (!info.hamming && !info.notfound) + t->is_searching[req->pgbuf] = false; + return 0; + } - case VTXIOCGETPAGE: - { - vtx_pagereq_t *req = arg; - int start, end; - - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS || req->start < 0 || - req->start > req->end || req->end >= (virtual_mode ? VTX_VIRTUALSIZE : VTX_PAGESIZE)) - return -EINVAL; - if(copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1)) + case VTXIOCGETPAGE: + { + vtx_pagereq_t *req = arg; + int start, end; + + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS || req->start < 0 || + req->start > req->end || req->end >= (virtual_mode ? VTX_VIRTUALSIZE : VTX_PAGESIZE)) + return -EINVAL; + if (copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1)) + return -EFAULT; + + /* + * Always read the time directly from SAA5249 + */ + + if (req->start <= 39 && req->end >= 32) { + int len; + char buf[16]; + start = max(req->start, 32); + end = min(req->end, 39); + len = end - start + 1; + if (i2c_senddata(t, 8, 0, 0, start, -1) || + i2c_getdata(t, len, buf)) + return -EIO; + if (copy_to_user(req->buffer + start - req->start, buf, len)) + return -EFAULT; + } + /* Insert the current header if DAU is still searching for a page */ + if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) { + char buf[32]; + int len; + + start = max(req->start, 7); + end = min(req->end, 31); + len = end - start + 1; + if (i2c_senddata(t, 8, 0, 0, start, -1) || + i2c_getdata(t, len, buf)) + return -EIO; + if (copy_to_user(req->buffer + start - req->start, buf, len)) return -EFAULT; - - /* - * Always read the time directly from SAA5249 - */ - - if (req->start <= 39 && req->end >= 32) - { - int len; - char buf[16]; - start = max(req->start, 32); - end = min(req->end, 39); - len=end-start+1; - if (i2c_senddata(t, 8, 0, 0, start, -1) || - i2c_getdata(t, len, buf)) - return -EIO; - if(copy_to_user(req->buffer+start-req->start, buf, len)) - return -EFAULT; - } - /* Insert the current header if DAU is still searching for a page */ - if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) - { - char buf[32]; - int len; - start = max(req->start, 7); - end = min(req->end, 31); - len=end-start+1; - if (i2c_senddata(t, 8, 0, 0, start, -1) || - i2c_getdata(t, len, buf)) - return -EIO; - if(copy_to_user(req->buffer+start-req->start, buf, len)) - return -EFAULT; - } - return 0; } + return 0; + } - case VTXIOCSTOPDAU: - { - vtx_pagereq_t *req = arg; + case VTXIOCSTOPDAU: + { + vtx_pagereq_t *req = arg; - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - t->vdau[req->pgbuf].stopped = true; - t->is_searching[req->pgbuf] = false; - return 0; - } + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + t->vdau[req->pgbuf].stopped = true; + t->is_searching[req->pgbuf] = false; + return 0; + } - case VTXIOCPUTPAGE: - case VTXIOCSETDISP: - case VTXIOCPUTSTAT: - return 0; + case VTXIOCPUTPAGE: + case VTXIOCSETDISP: + case VTXIOCPUTSTAT: + return 0; - case VTXIOCCLRCACHE: - { - if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11, - ' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ', - ' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ', -1)) - return -EIO; - if (i2c_senddata(t, 3, 0x20, -1)) - return -EIO; - jdelay(10 * CLEAR_DELAY); /* I have no idea how long we have to wait here */ - return 0; - } + case VTXIOCCLRCACHE: + { + if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11, + ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ' ', ' ', ' ', ' ', ' ', + -1)) + return -EIO; + if (i2c_senddata(t, 3, 0x20, -1)) + return -EIO; + jdelay(10 * CLEAR_DELAY); /* I have no idea how long we have to wait here */ + return 0; + } - case VTXIOCSETVIRT: - { - /* The SAA5249 has virtual-row reception turned on always */ - t->virtual_mode = (int)(long)arg; - return 0; - } + case VTXIOCSETVIRT: + { + /* The SAA5249 has virtual-row reception turned on always */ + t->virtual_mode = (int)(long)arg; + return 0; + } } return -EINVAL; } @@ -616,8 +483,7 @@ static inline unsigned int vtx_fix_command(unsigned int cmd) static int saa5249_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; + struct saa5249_device *t = video_drvdata(file); int err; cmd = vtx_fix_command(cmd); @@ -629,32 +495,27 @@ static int saa5249_ioctl(struct inode *inode, struct file *file, static int saa5249_open(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; - int err,pgbuf; + struct saa5249_device *t = video_drvdata(file); + int pgbuf; - err = video_exclusive_open(inode,file); - if (err < 0) - return err; + if (t->client == NULL) + return -ENODEV; - if (t->client==NULL) { - err = -ENODEV; - goto fail; - } + if (test_and_set_bit(0, &t->in_use)) + return -EBUSY; - if (i2c_senddata(t, 0, 0, -1) || /* Select R11 */ - /* Turn off parity checks (we do this ourselves) */ + if (i2c_senddata(t, 0, 0, -1) || /* Select R11 */ + /* Turn off parity checks (we do this ourselves) */ i2c_senddata(t, 1, disp_modes[t->disp_mode][0], 0, -1) || - /* Display TV-picture, no virtual rows */ - i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) /* Set display to page 4 */ - + /* Display TV-picture, no virtual rows */ + i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) + /* Set display to page 4 */ { - err = -EIO; - goto fail; + clear_bit(0, &t->in_use); + return -EIO; } - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) - { + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat)); @@ -665,39 +526,20 @@ static int saa5249_open(struct inode *inode, struct file *file) } t->virtual_mode = false; return 0; - - fail: - video_exclusive_release(inode,file); - return err; } static int saa5249_release(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; + struct saa5249_device *t = video_drvdata(file); + i2c_senddata(t, 1, 0x20, -1); /* Turn off CCT */ i2c_senddata(t, 5, 3, 3, -1); /* Turn off TV-display */ - video_exclusive_release(inode,file); + clear_bit(0, &t->in_use); return 0; } -static int __init init_saa_5249 (void) -{ - printk(KERN_INFO "SAA5249 driver (" IF_NAME " interface) for VideoText version %d.%d\n", - VTX_VER_MAJ, VTX_VER_MIN); - return i2c_add_driver(&i2c_driver_videotext); -} - -static void __exit cleanup_saa_5249 (void) -{ - i2c_del_driver(&i2c_driver_videotext); -} - -module_init(init_saa_5249); -module_exit(cleanup_saa_5249); - static const struct file_operations saa_fops = { .owner = THIS_MODULE, .open = saa5249_open, @@ -711,8 +553,84 @@ static const struct file_operations saa_fops = { static struct video_device saa_template = { - .name = IF_NAME, + .name = "saa5249", .fops = &saa_fops, + .release = video_device_release, }; -MODULE_LICENSE("GPL"); +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + +static int saa5249_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int pgbuf; + int err; + struct video_device *vd; + struct saa5249_device *t; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + v4l_info(client, "VideoText version %d.%d\n", + VTX_VER_MAJ, VTX_VER_MIN); + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (t == NULL) + return -ENOMEM; + mutex_init(&t->lock); + + /* Now create a video4linux device */ + vd = kmalloc(sizeof(struct video_device), GFP_KERNEL); + if (vd == NULL) { + kfree(client); + return -ENOMEM; + } + i2c_set_clientdata(client, vd); + memcpy(vd, &saa_template, sizeof(*vd)); + + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { + memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); + memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); + memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat)); + t->vdau[pgbuf].expire = 0; + t->vdau[pgbuf].clrfound = true; + t->vdau[pgbuf].stopped = true; + t->is_searching[pgbuf] = false; + } + video_set_drvdata(vd, t); + + /* Register it */ + err = video_register_device(vd, VFL_TYPE_VTX, -1); + if (err < 0) { + kfree(t); + kfree(vd); + return err; + } + t->client = client; + return 0; +} + +static int saa5249_remove(struct i2c_client *client) +{ + struct video_device *vd = i2c_get_clientdata(client); + + video_unregister_device(vd); + kfree(video_get_drvdata(vd)); + kfree(vd); + return 0; +} + +static const struct i2c_device_id saa5249_id[] = { + { "saa5249", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa5249_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa5249", + .driverid = I2C_DRIVERID_SAA5249, + .probe = saa5249_probe, + .remove = saa5249_remove, + .id_table = saa5249_id, +}; diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 4aa82b31070..adf2ba79496 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -31,36 +31,24 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/wait.h> -#include <asm/io.h> #include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev.h> +#include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7110 video decoder driver"); MODULE_AUTHOR("Pauline Middelink"); MODULE_LICENSE("GPL"); -#include <linux/i2c.h> - -#define I2C_NAME(s) (s)->name - -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <linux/video_decoder.h> - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - #define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ #define SAA7110_MAX_OUTPUT 0 /* its a decoder only */ -#define I2C_SAA7110 0x9C /* or 0x9E */ - #define SAA7110_NR_REG 0x35 struct saa7110 { @@ -81,10 +69,7 @@ struct saa7110 { /* I2C support functions */ /* ----------------------------------------------------------------------- */ -static int -saa7110_write (struct i2c_client *client, - u8 reg, - u8 value) +static int saa7110_write(struct i2c_client *client, u8 reg, u8 value) { struct saa7110 *decoder = i2c_get_clientdata(client); @@ -92,10 +77,7 @@ saa7110_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static int -saa7110_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7110_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg = *data; /* first register to write to */ @@ -115,8 +97,8 @@ saa7110_write_block (struct i2c_client *client, memcpy(decoder->reg + reg, data + 1, len - 1); } else { for (++data, --len; len; len--) { - if ((ret = saa7110_write(client, reg++, - *data++)) < 0) + ret = saa7110_write(client, reg++, *data++); + if (ret < 0) break; } } @@ -124,8 +106,7 @@ saa7110_write_block (struct i2c_client *client, return ret; } -static inline int -saa7110_read (struct i2c_client *client) +static inline int saa7110_read(struct i2c_client *client) { return i2c_smbus_read_byte(client); } @@ -138,9 +119,7 @@ saa7110_read (struct i2c_client *client) #define FRESP_06H_SVIDEO 0x83 //0xC0 -static int -saa7110_selmux (struct i2c_client *client, - int chan) +static int saa7110_selmux(struct i2c_client *client, int chan) { static const unsigned char modes[9][8] = { /* mode 0 */ @@ -197,8 +176,7 @@ static const unsigned char initseq[1 + SAA7110_NR_REG] = { /* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02 }; -static int -determine_norm (struct i2c_client *client) +static int determine_norm(struct i2c_client *client) { DEFINE_WAIT(wait); struct saa7110 *decoder = i2c_get_clientdata(client); @@ -212,29 +190,23 @@ determine_norm (struct i2c_client *client) finish_wait(&decoder->wq, &wait); status = saa7110_read(client); if (status & 0x40) { - dprintk(1, KERN_INFO "%s: status=0x%02x (no signal)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (no signal)\n", status); return decoder->norm; // no change } if ((status & 3) == 0) { saa7110_write(client, 0x06, 0x83); if (status & 0x20) { - dprintk(1, - KERN_INFO - "%s: status=0x%02x (NTSC/no color)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (NTSC/no color)\n", status); //saa7110_write(client,0x2E,0x81); return VIDEO_MODE_NTSC; } - dprintk(1, KERN_INFO "%s: status=0x%02x (PAL/no color)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (PAL/no color)\n", status); //saa7110_write(client,0x2E,0x9A); return VIDEO_MODE_PAL; } //saa7110_write(client,0x06,0x03); if (status & 0x20) { /* 60Hz */ - dprintk(1, KERN_INFO "%s: status=0x%02x (NTSC)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (NTSC)\n", status); saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x50); saa7110_write(client, 0x11, 0x2C); @@ -254,13 +226,11 @@ determine_norm (struct i2c_client *client) status = saa7110_read(client); if ((status & 0x03) == 0x01) { - dprintk(1, KERN_INFO "%s: status=0x%02x (SECAM)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (SECAM)\n", status); saa7110_write(client, 0x0D, 0x87); return VIDEO_MODE_SECAM; } - dprintk(1, KERN_INFO "%s: status=0x%02x (PAL)\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status=0x%02x (PAL)\n", status); return VIDEO_MODE_PAL; } @@ -286,8 +256,8 @@ saa7110_command (struct i2c_client *client, VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO; dc->inputs = SAA7110_MAX_INPUT; dc->outputs = SAA7110_MAX_OUTPUT; - } break; + } case DECODER_GET_STATUS: { @@ -295,8 +265,8 @@ saa7110_command (struct i2c_client *client, int res = 0; status = saa7110_read(client); - dprintk(1, KERN_INFO "%s: status=0x%02x norm=%d\n", - I2C_NAME(client), status, decoder->norm); + v4l_dbg(1, debug, client, "status=0x%02x norm=%d\n", + status, decoder->norm); if (!(status & 0x40)) res |= DECODER_STATUS_GOOD; if (status & 0x03) @@ -314,8 +284,8 @@ saa7110_command (struct i2c_client *client, break; } *(int *) arg = res; - } break; + } case DECODER_SET_NORM: v = *(int *) arg; @@ -328,34 +298,24 @@ saa7110_command (struct i2c_client *client, saa7110_write(client, 0x0F, 0x50); saa7110_write(client, 0x11, 0x2C); //saa7110_write(client, 0x2E, 0x81); - dprintk(1, - KERN_INFO "%s: switched to NTSC\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to NTSC\n"); break; case VIDEO_MODE_PAL: saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); //saa7110_write(client, 0x2E, 0x9A); - dprintk(1, - KERN_INFO "%s: switched to PAL\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to PAL\n"); break; case VIDEO_MODE_SECAM: saa7110_write(client, 0x0D, 0x87); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); //saa7110_write(client, 0x2E, 0x9A); - dprintk(1, - KERN_INFO - "%s: switched to SECAM\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to SECAM\n"); break; case VIDEO_MODE_AUTO: - dprintk(1, - KERN_INFO - "%s: TV standard detection...\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to AUTO\n"); decoder->norm = determine_norm(client); *(int *) arg = decoder->norm; break; @@ -368,15 +328,12 @@ saa7110_command (struct i2c_client *client, case DECODER_SET_INPUT: v = *(int *) arg; if (v < 0 || v > SAA7110_MAX_INPUT) { - dprintk(1, - KERN_INFO "%s: input=%d not available\n", - I2C_NAME(client), v); + v4l_dbg(1, debug, client, "input=%d not available\n", v); return -EINVAL; } if (decoder->input != v) { saa7110_selmux(client, v); - dprintk(1, KERN_INFO "%s: switched to input=%d\n", - I2C_NAME(client), v); + v4l_dbg(1, debug, client, "switched to input=%d\n", v); } break; @@ -392,8 +349,7 @@ saa7110_command (struct i2c_client *client, if (decoder->enable != v) { decoder->enable = v; saa7110_write(client, 0x0E, v ? 0x18 : 0x80); - dprintk(1, KERN_INFO "%s: YUV %s\n", I2C_NAME(client), - v ? "on" : "off"); + v4l_dbg(1, debug, client, "YUV %s\n", v ? "on" : "off"); } break; @@ -423,23 +379,23 @@ saa7110_command (struct i2c_client *client, saa7110_write(client, 0x07, (decoder->hue >> 8) - 128); } - } break; + } case DECODER_DUMP: + if (!debug) + break; for (v = 0; v < SAA7110_NR_REG; v += 16) { int j; - dprintk(1, KERN_DEBUG "%s: %02x:", I2C_NAME(client), - v); + v4l_dbg(1, debug, client, "%02x:", v); for (j = 0; j < 16 && v + j < SAA7110_NR_REG; j++) - dprintk(1, " %02x", decoder->reg[v + j]); - dprintk(1, "\n"); + printk(KERN_CONT " %02x", decoder->reg[v + j]); + printk(KERN_CONT "\n"); } break; default: - dprintk(1, KERN_INFO "unknown saa7110_command??(%d)\n", - cmd); + v4l_dbg(1, debug, client, "unknown command %08x\n", cmd); return -EINVAL; } return 0; @@ -451,55 +407,28 @@ saa7110_command (struct i2c_client *client, * Generic i2c probe * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static unsigned short normal_i2c[] = { - I2C_SAA7110 >> 1, - (I2C_SAA7110 >> 1) + 1, - I2C_CLIENT_END -}; - -static unsigned short ignore = I2C_CLIENT_END; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x9c >> 1, 0x9e >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_saa7110; +I2C_CLIENT_INSMOD; -static int -saa7110_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7110_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; struct saa7110 *decoder; int rv; - dprintk(1, - KERN_INFO - "saa7110.c: detecting saa7110 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality - (adapter, - I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7110; - strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL); - if (!decoder) { - kfree(client); + if (!decoder) return -ENOMEM; - } decoder->norm = VIDEO_MODE_PAL; decoder->input = 0; decoder->enable = 1; @@ -510,18 +439,10 @@ saa7110_detect_client (struct i2c_adapter *adapter, init_waitqueue_head(&decoder->wq); i2c_set_clientdata(client, decoder); - rv = i2c_attach_client(client); - if (rv) { - kfree(client); - kfree(decoder); - return rv; - } - rv = saa7110_write_block(client, initseq, sizeof(initseq)); - if (rv < 0) - dprintk(1, KERN_ERR "%s_attach: init status %d\n", - I2C_NAME(client), rv); - else { + if (rv < 0) { + v4l_dbg(1, debug, client, "init status %d\n", rv); + } else { int ver, status; saa7110_write(client, 0x21, 0x10); saa7110_write(client, 0x0e, 0x18); @@ -530,10 +451,8 @@ saa7110_detect_client (struct i2c_adapter *adapter, saa7110_write(client, 0x0D, 0x06); //mdelay(150); status = saa7110_read(client); - dprintk(1, - KERN_INFO - "%s_attach: SAA7110A version %x at 0x%02x, status=0x%02x\n", - I2C_NAME(client), ver, client->addr << 1, status); + v4l_dbg(1, debug, client, "version %x, status=0x%02x\n", + ver, status); saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); @@ -547,58 +466,25 @@ saa7110_detect_client (struct i2c_adapter *adapter, return 0; } -static int -saa7110_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "saa7110.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7110_detect_client); -} - -static int -saa7110_detach_client (struct i2c_client *client) +static int saa7110_remove(struct i2c_client *client) { - struct saa7110 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7110 = { - .driver = { - .name = "saa7110", - }, - - .id = I2C_DRIVERID_SAA7110, +static const struct i2c_device_id saa7110_id[] = { + { "saa7110", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7110_id); - .attach_adapter = saa7110_attach_adapter, - .detach_client = saa7110_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7110", + .driverid = I2C_DRIVERID_SAA7110, .command = saa7110_command, + .probe = saa7110_probe, + .remove = saa7110_remove, + .id_table = saa7110_id, }; - -static int __init -saa7110_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7110); -} - -static void __exit -saa7110_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7110); -} - -module_init(saa7110_init); -module_exit(saa7110_exit); diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c index 96c3d435772..a4738a2fb4d 100644 --- a/drivers/media/video/saa7111.c +++ b/drivers/media/video/saa7111.c @@ -28,43 +28,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7111 video decoder driver"); MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ #define SAA7111_NR_REG 0x18 @@ -77,14 +58,9 @@ struct saa7111 { int enable; }; -#define I2C_SAA7111 0x48 - /* ----------------------------------------------------------------------- */ -static inline int -saa7111_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int saa7111_write(struct i2c_client *client, u8 reg, u8 value) { struct saa7111 *decoder = i2c_get_clientdata(client); @@ -92,8 +68,7 @@ saa7111_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline void -saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) +static inline void saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) { struct saa7111 *decoder = i2c_get_clientdata(client); @@ -103,10 +78,7 @@ saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) } } -static int -saa7111_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7111_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -127,18 +99,17 @@ saa7111_write_block (struct i2c_client *client, decoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = saa7111_write(client, reg, - *data++)) < 0) + ret = saa7111_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -147,16 +118,13 @@ saa7111_write_block (struct i2c_client *client, return ret; } -static int -saa7111_init_decoder (struct i2c_client *client, - struct video_decoder_init *init) +static int saa7111_init_decoder(struct i2c_client *client, + struct video_decoder_init *init) { return saa7111_write_block(client, init->data, init->len); } -static inline int -saa7111_read (struct i2c_client *client, - u8 reg) +static inline int saa7111_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } @@ -203,28 +171,23 @@ static const unsigned char saa7111_i2c_init[] = { 0x17, 0x00, /* 17 - VBI */ }; -static int -saa7111_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int saa7111_command(struct i2c_client *client, unsigned cmd, void *arg) { struct saa7111 *decoder = i2c_get_clientdata(client); switch (cmd) { - case 0: break; case DECODER_INIT: { struct video_decoder_init *init = arg; + struct video_decoder_init vdi; + if (NULL != init) return saa7111_init_decoder(client, init); - else { - struct video_decoder_init vdi; - vdi.data = saa7111_i2c_init; - vdi.len = sizeof(saa7111_i2c_init); - return saa7111_init_decoder(client, &vdi); - } + vdi.data = saa7111_i2c_init; + vdi.len = sizeof(saa7111_i2c_init); + return saa7111_init_decoder(client, &vdi); } case DECODER_DUMP: @@ -234,15 +197,15 @@ saa7111_command (struct i2c_client *client, for (i = 0; i < SAA7111_NR_REG; i += 16) { int j; - printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i); + v4l_info(client, "%03x", i); for (j = 0; j < 16 && i + j < SAA7111_NR_REG; ++j) { - printk(" %02x", + printk(KERN_CONT " %02x", saa7111_read(client, i + j)); } - printk("\n"); + printk(KERN_CONT "\n"); } - } break; + } case DECODER_GET_CAPABILITIES: { @@ -255,8 +218,8 @@ saa7111_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 8; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { @@ -265,8 +228,7 @@ saa7111_command (struct i2c_client *client, int res; status = saa7111_read(client, 0x1f); - dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status: 0x%02x\n", status); res = 0; if ((status & (1 << 6)) == 0) { res |= DECODER_STATUS_GOOD; @@ -294,8 +256,8 @@ saa7111_command (struct i2c_client *client, res |= DECODER_STATUS_COLOR; } *iarg = res; - } break; + } case DECODER_SET_GPIO: { @@ -362,8 +324,8 @@ saa7111_command (struct i2c_client *client, } decoder->norm = *iarg; - } break; + } case DECODER_SET_INPUT: { @@ -387,8 +349,8 @@ saa7111_command (struct i2c_client *client, 3) ? 0x80 : 0)); } - } break; + } case DECODER_SET_OUTPUT: { @@ -398,8 +360,8 @@ saa7111_command (struct i2c_client *client, if (*iarg != 0) { return -EINVAL; } - } break; + } case DECODER_ENABLE_OUTPUT: { @@ -439,8 +401,8 @@ saa7111_command (struct i2c_client *client, (decoder->reg[0x11] & 0xf3)); } } - } break; + } case DECODER_SET_PICTURE: { @@ -454,8 +416,8 @@ saa7111_command (struct i2c_client *client, saa7111_write(client, 0x0c, pic->colour >> 9); /* We want -128 to 127 we get 0-65535 */ saa7111_write(client, 0x0d, (pic->hue - 32768) >> 8); - } break; + } default: return -EINVAL; @@ -466,48 +428,23 @@ saa7111_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END }; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x48 >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_saa7111; +I2C_CLIENT_INSMOD; -static int -saa7111_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7111_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; - struct i2c_client *client; struct saa7111 *decoder; struct video_decoder_init vdi; - dprintk(1, - KERN_INFO - "saa7111.c: detecting saa7111 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7111; - strlcpy(I2C_NAME(client), "saa7111", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct saa7111), GFP_KERNEL); if (decoder == NULL) { @@ -519,82 +456,37 @@ saa7111_detect_client (struct i2c_adapter *adapter, decoder->enable = 1; i2c_set_clientdata(client, decoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(decoder); - return i; - } - vdi.data = saa7111_i2c_init; vdi.len = sizeof(saa7111_i2c_init); i = saa7111_init_decoder(client, &vdi); if (i < 0) { - dprintk(1, KERN_ERR "%s_attach error: init status %d\n", - I2C_NAME(client), i); + v4l_dbg(1, debug, client, "init status %d\n", i); } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version %x at address 0x%x\n", - I2C_NAME(client), saa7111_read(client, 0x00) >> 4, - client->addr << 1); + v4l_dbg(1, debug, client, "revision %x\n", + saa7111_read(client, 0x00) >> 4); } - return 0; } -static int -saa7111_attach_adapter (struct i2c_adapter *adapter) +static int saa7111_remove(struct i2c_client *client) { - dprintk(1, - KERN_INFO - "saa7111.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7111_detect_client); -} - -static int -saa7111_detach_client (struct i2c_client *client) -{ - struct saa7111 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7111 = { - .driver = { - .name = "saa7111", - }, - - .id = I2C_DRIVERID_SAA7111A, +static const struct i2c_device_id saa7111_id[] = { + { "saa7111_old", 0 }, /* "saa7111" maps to the saa7115 driver */ + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7111_id); - .attach_adapter = saa7111_attach_adapter, - .detach_client = saa7111_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7111", + .driverid = I2C_DRIVERID_SAA7111A, .command = saa7111_command, + .probe = saa7111_probe, + .remove = saa7111_remove, + .id_table = saa7111_id, }; - -static int __init -saa7111_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7111); -} - -static void __exit -saa7111_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7111); -} - -module_init(saa7111_init); -module_exit(saa7111_exit); diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c index e79075533be..7ca709fda5f 100644 --- a/drivers/media/video/saa7114.c +++ b/drivers/media/video/saa7114.c @@ -29,43 +29,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7114H video decoder driver"); MODULE_AUTHOR("Maxim Yevtyushkin"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(x) (x)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct saa7114 { @@ -81,9 +62,6 @@ struct saa7114 { int playback; }; -#define I2C_SAA7114 0x42 -#define I2C_SAA7114A 0x40 - #define I2C_DELAY 10 @@ -129,18 +107,12 @@ struct saa7114 { /* ----------------------------------------------------------------------- */ -static inline int -saa7114_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int saa7114_write(struct i2c_client *client, u8 reg, u8 value) { return i2c_smbus_write_byte_data(client, reg, value); } -static int -saa7114_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7114_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -160,18 +132,17 @@ saa7114_write_block (struct i2c_client *client, reg++; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = saa7114_write(client, reg, - *data++)) < 0) + ret = saa7114_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -180,9 +151,7 @@ saa7114_write_block (struct i2c_client *client, return ret; } -static inline int -saa7114_read (struct i2c_client *client, - u8 reg) +static inline int saa7114_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } @@ -452,15 +421,11 @@ static const unsigned char init[] = { 0xef, 0x00 }; -static int -saa7114_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int saa7114_command(struct i2c_client *client, unsigned cmd, void *arg) { struct saa7114 *decoder = i2c_get_clientdata(client); switch (cmd) { - case 0: //dprintk(1, KERN_INFO "%s: writing init\n", I2C_NAME(client)); //saa7114_write_block(client, init, sizeof(init)); @@ -470,27 +435,28 @@ saa7114_command (struct i2c_client *client, { int i; - dprintk(1, KERN_INFO "%s: decoder dump\n", I2C_NAME(client)); + if (!debug) + break; + v4l_info(client, "decoder dump\n"); for (i = 0; i < 32; i += 16) { int j; - printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i); + v4l_info(client, "%03x", i); for (j = 0; j < 16; ++j) { - printk(" %02x", + printk(KERN_CONT " %02x", saa7114_read(client, i + j)); } - printk("\n"); + printk(KERN_CONT "\n"); } - } break; + } case DECODER_GET_CAPABILITIES: { struct video_decoder_capability *cap = arg; - dprintk(1, KERN_DEBUG "%s: decoder get capabilities\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "get capabilities\n"); cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC | @@ -498,8 +464,8 @@ saa7114_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 8; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { @@ -509,8 +475,7 @@ saa7114_command (struct i2c_client *client, status = saa7114_read(client, 0x1f); - dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status: 0x%02x\n", status); res = 0; if ((status & (1 << 6)) == 0) { res |= DECODER_STATUS_GOOD; @@ -538,8 +503,8 @@ saa7114_command (struct i2c_client *client, res |= DECODER_STATUS_COLOR; } *iarg = res; - } break; + } case DECODER_SET_NORM: { @@ -547,12 +512,11 @@ saa7114_command (struct i2c_client *client, short int hoff = 0, voff = 0, w = 0, h = 0; - dprintk(1, KERN_DEBUG "%s: decoder set norm ", - I2C_NAME(client)); - switch (*iarg) { + v4l_dbg(1, debug, client, "set norm\n"); + switch (*iarg) { case VIDEO_MODE_NTSC: - dprintk(1, "NTSC\n"); + v4l_dbg(1, debug, client, "NTSC\n"); decoder->reg[REG_ADDR(0x06)] = SAA_7114_NTSC_HSYNC_START; decoder->reg[REG_ADDR(0x07)] = @@ -571,7 +535,7 @@ saa7114_command (struct i2c_client *client, break; case VIDEO_MODE_PAL: - dprintk(1, "PAL\n"); + v4l_dbg(1, debug, client, "PAL\n"); decoder->reg[REG_ADDR(0x06)] = SAA_7114_PAL_HSYNC_START; decoder->reg[REG_ADDR(0x07)] = @@ -590,9 +554,8 @@ saa7114_command (struct i2c_client *client, break; default: - dprintk(1, " Unknown video mode!!!\n"); + v4l_dbg(1, debug, client, "Unknown video mode\n"); return -EINVAL; - } @@ -644,22 +607,20 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x80, 0x36); // i-port and scaler back end clock selection decoder->norm = *iarg; - } break; + } case DECODER_SET_INPUT: { int *iarg = arg; - dprintk(1, KERN_DEBUG "%s: decoder set input (%d)\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "set input (%d)\n", *iarg); if (*iarg < 0 || *iarg > 7) { return -EINVAL; } if (decoder->input != *iarg) { - dprintk(1, KERN_DEBUG "%s: now setting %s input\n", - I2C_NAME(client), + v4l_dbg(1, debug, client, "now setting %s input\n", *iarg >= 6 ? "S-Video" : "Composite"); decoder->input = *iarg; @@ -690,30 +651,29 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x0e, decoder->reg[REG_ADDR(0x0e)]); } - } break; + } case DECODER_SET_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_DEBUG "%s: decoder set output\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "set output\n"); /* not much choice of outputs */ if (*iarg != 0) { return -EINVAL; } - } break; + } case DECODER_ENABLE_OUTPUT: { int *iarg = arg; int enable = (*iarg != 0); - dprintk(1, KERN_DEBUG "%s: decoder %s output\n", - I2C_NAME(client), enable ? "enable" : "disable"); + v4l_dbg(1, debug, client, "%s output\n", + enable ? "enable" : "disable"); decoder->playback = !enable; @@ -754,18 +714,16 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x80, 0x36); } - } break; + } case DECODER_SET_PICTURE: { struct video_picture *pic = arg; - dprintk(1, - KERN_DEBUG - "%s: decoder set picture bright=%d contrast=%d saturation=%d hue=%d\n", - I2C_NAME(client), pic->brightness, pic->contrast, - pic->colour, pic->hue); + v4l_dbg(1, debug, client, + "decoder set picture bright=%d contrast=%d saturation=%d hue=%d\n", + pic->brightness, pic->contrast, pic->colour, pic->hue); if (decoder->bright != pic->brightness) { /* We want 0 to 255 we get 0-65535 */ @@ -789,8 +747,8 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x0d, (decoder->hue - 32768) >> 8); } - } break; + } default: return -EINVAL; @@ -801,58 +759,30 @@ saa7114_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = - { I2C_SAA7114 >> 1, I2C_SAA7114A >> 1, I2C_CLIENT_END }; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_saa7114; +I2C_CLIENT_INSMOD; -static int -saa7114_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7114_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i, err[30]; short int hoff = SAA_7114_NTSC_HOFFSET; short int voff = SAA_7114_NTSC_VOFFSET; short int w = SAA_7114_NTSC_WIDTH; short int h = SAA_7114_NTSC_HEIGHT; - struct i2c_client *client; struct saa7114 *decoder; - dprintk(1, - KERN_INFO - "saa7114.c: detecting saa7114 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7114; - strlcpy(I2C_NAME(client), "saa7114", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct saa7114), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); + if (decoder == NULL) return -ENOMEM; - } decoder->norm = VIDEO_MODE_NTSC; decoder->input = -1; decoder->enable = 1; @@ -937,8 +867,7 @@ saa7114_detect_client (struct i2c_adapter *adapter, decoder->reg[REG_ADDR(0x0e)] |= 1; // combfilter on - dprintk(1, KERN_DEBUG "%s_attach: starting decoder init\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "starting init\n"); err[0] = saa7114_write_block(client, decoder->reg + (0x20 << 1), @@ -962,28 +891,23 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 0; i <= 5; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } for (i = 6; i < 8; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } - dprintk(1, - KERN_DEBUG - "%s_attach: performing decoder reset sequence\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, + "performing decoder reset sequence\n"); err[6] = saa7114_write(client, 0x80, 0x06); // i-port and scaler backend clock selection, task A&B off err[7] = saa7114_write(client, 0x88, 0xd8); // sw reset scaler @@ -991,19 +915,15 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 6; i <= 8; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } - dprintk(1, KERN_INFO "%s_attach: performing the rest of init\n", - I2C_NAME(client)); - + v4l_dbg(1, debug, client, "performing the rest of init\n"); err[9] = saa7114_write(client, 0x01, decoder->reg[REG_ADDR(0x01)]); err[10] = saa7114_write_block(client, decoder->reg + (0x03 << 1), (0x1e + 1 - 0x03) << 1); // big seq @@ -1039,37 +959,32 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 9; i <= 18; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } for (i = 6; i < 8; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } for (i = 0x11; i <= 0x13; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } - dprintk(1, KERN_DEBUG "%s_attach: setting video input\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "setting video input\n"); err[19] = saa7114_write(client, 0x02, decoder->reg[REG_ADDR(0x02)]); @@ -1080,20 +995,15 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 19; i <= 21; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } - dprintk(1, - KERN_DEBUG - "%s_attach: performing decoder reset sequence\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "performing decoder reset sequence\n"); err[22] = saa7114_write(client, 0x88, 0xd8); // sw reset scaler err[23] = saa7114_write(client, 0x88, 0xf8); // sw reset scaler release @@ -1102,13 +1012,11 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 22; i <= 24; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } @@ -1116,101 +1024,45 @@ saa7114_detect_client (struct i2c_adapter *adapter, err[26] = saa7114_write(client, 0x07, init[REG_ADDR(0x07)]); err[27] = saa7114_write(client, 0x10, init[REG_ADDR(0x10)]); - dprintk(1, - KERN_INFO - "%s_attach: chip version %x, decoder status 0x%02x\n", - I2C_NAME(client), saa7114_read(client, 0x00) >> 4, + v4l_dbg(1, debug, client, "chip version %x, decoder status 0x%02x\n", + saa7114_read(client, 0x00) >> 4, saa7114_read(client, 0x1f)); - dprintk(1, - KERN_DEBUG - "%s_attach: power save control: 0x%02x, scaler status: 0x%02x\n", - I2C_NAME(client), saa7114_read(client, 0x88), + v4l_dbg(1, debug, client, + "power save control: 0x%02x, scaler status: 0x%02x\n", + saa7114_read(client, 0x88), saa7114_read(client, 0x8f)); for (i = 0x94; i < 0x96; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(decoder); - return i; - } - //i = saa7114_write_block(client, init, sizeof(init)); - i = 0; - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach error: init status %d\n", - I2C_NAME(client), i); - } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version %x at address 0x%x\n", - I2C_NAME(client), saa7114_read(client, 0x00) >> 4, - client->addr << 1); - } - return 0; } -static int -saa7114_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "saa7114.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7114_detect_client); -} - -static int -saa7114_detach_client (struct i2c_client *client) +static int saa7114_remove(struct i2c_client *client) { - struct saa7114 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7114 = { - .driver = { - .name = "saa7114", - }, - - .id = I2C_DRIVERID_SAA7114, +static const struct i2c_device_id saa7114_id[] = { + { "saa7114_old", 0 }, /* "saa7114" maps to the saa7115 driver */ + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7114_id); - .attach_adapter = saa7114_attach_adapter, - .detach_client = saa7114_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7114", + .driverid = I2C_DRIVERID_SAA7114, .command = saa7114_command, + .probe = saa7114_probe, + .remove = saa7114_remove, + .id_table = saa7114_id, }; - -static int __init -saa7114_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7114); -} - -static void __exit -saa7114_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7114); -} - -module_init(saa7114_init); -module_exit(saa7114_exit); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index ad733caec72..c8e9cb3db30 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1057,7 +1057,7 @@ static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo for (i = 0; i <= 23; i++) lcr[i] = 0xff; - if (fmt->service_set == 0) { + if (fmt == NULL) { /* raw VBI */ if (is_50hz) for (i = 6; i <= 23; i++) @@ -1113,7 +1113,7 @@ static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo } /* enable/disable raw VBI capturing */ - saa711x_writeregs(client, fmt->service_set == 0 ? + saa711x_writeregs(client, fmt == NULL ? saa7115_cfg_vbi_on : saa7115_cfg_vbi_off); } @@ -1153,6 +1153,10 @@ static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt saa711x_set_lcr(client, &fmt->fmt.sliced); return 0; } + if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + saa711x_set_lcr(client, NULL); + return 0; + } if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -1309,10 +1313,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar case VIDIOC_INT_S_VIDEO_ROUTING: { struct v4l2_routing *route = arg; + u32 input = route->input; + u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0; v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output); - /* saa7113 does not have these inputs */ - if (state->ident == V4L2_IDENT_SAA7113 && + /* saa7111/3 does not have these inputs */ + if ((state->ident == V4L2_IDENT_SAA7113 || + state->ident == V4L2_IDENT_SAA7111) && (route->input == SAA7115_COMPOSITE4 || route->input == SAA7115_COMPOSITE5)) { return -EINVAL; @@ -1327,10 +1334,23 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar (route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); state->input = route->input; + /* saa7111 has slightly different input numbering */ + if (state->ident == V4L2_IDENT_SAA7111) { + if (input >= SAA7115_COMPOSITE4) + input -= 2; + /* saa7111 specific */ + saa711x_write(client, R_10_CHROMA_CNTL_2, + (saa711x_read(client, R_10_CHROMA_CNTL_2) & 0x3f) | + ((route->output & 0xc0) ^ 0x40)); + saa711x_write(client, R_13_RT_X_PORT_OUT_CNTL, + (saa711x_read(client, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | + ((route->output & 2) ? 0x0a : 0)); + } + /* select mode */ saa711x_write(client, R_02_INPUT_CNTL_1, - (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) | - state->input); + (saa711x_read(client, R_02_INPUT_CNTL_1) & mask) | + input); /* bypass chrominance trap for S-Video modes */ saa711x_write(client, R_09_LUMA_CNTL, @@ -1384,6 +1404,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar saa711x_writeregs(client, saa7115_cfg_reset_scaler); break; + case VIDIOC_INT_S_GPIO: + if (state->ident != V4L2_IDENT_SAA7111) + return -EINVAL; + saa711x_write(client, 0x11, (saa711x_read(client, 0x11) & 0x7f) | + (*(u32 *)arg ? 0x80 : 0)); + break; + case VIDIOC_INT_G_VBI_DATA: { struct v4l2_sliced_vbi_data *data = arg; @@ -1539,7 +1566,8 @@ static int saa7115_probe(struct i2c_client *client, state->crystal_freq = SAA7115_FREQ_32_11_MHZ; saa711x_writeregs(client, saa7115_init_auto_input); } - saa711x_writeregs(client, saa7115_init_misc); + if (state->ident != V4L2_IDENT_SAA7111) + saa711x_writeregs(client, saa7115_init_misc); saa711x_set_v4lstd(client, V4L2_STD_NTSC); v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n", diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index d0e83fe0ff5..cc02fb18efa 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -29,7 +29,7 @@ * Note: the saa7126 is identical to the saa7127, and the saa7128 is * identical to the saa7129, except that the saa7126 and saa7128 have * macrovision anti-taping support. This driver will almost certainly - * work find for those chips, except of course for the missing anti-taping + * work fine for those chips, except of course for the missing anti-taping * support. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index 707be175509..1fb6eccdade 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -1,3 +1,27 @@ + /* + saa6752hs - i2c-driver for the saa6752hs by Philips + + Copyright (C) 2004 Andrew de Quincey + + AC-3 support: + + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License vs published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA. + */ + #include <linux/module.h> #include <linux/kernel.h> #include <linux/string.h> @@ -10,6 +34,8 @@ #include <linux/types.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-i2c-drv-legacy.h> #include <linux/init.h> #include <linux/crc32.h> @@ -27,9 +53,6 @@ MODULE_DESCRIPTION("device driver for saa6752hs MPEG2 encoder"); MODULE_AUTHOR("Andrew de Quincey"); MODULE_LICENSE("GPL"); -static struct i2c_driver driver; -static struct i2c_client client_template; - enum saa6752hs_videoformat { SAA6752HS_VF_D1 = 0, /* standard D1 video format: 720x576 */ SAA6752HS_VF_2_3_D1 = 1,/* 2/3D1 video format: 480x576 */ @@ -46,7 +69,9 @@ struct saa6752hs_mpeg_params { __u16 ts_pid_pcr; /* audio */ - enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate; + enum v4l2_mpeg_audio_encoding au_encoding; + enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate; + enum v4l2_mpeg_audio_ac3_bitrate au_ac3_bitrate; /* video */ enum v4l2_mpeg_video_aspect vi_aspect; @@ -70,7 +95,9 @@ static const struct v4l2_format v4l2_format_table[] = }; struct saa6752hs_state { - struct i2c_client client; + int chip; + u32 revision; + int has_ac3; struct saa6752hs_mpeg_params params; enum saa6752hs_videoformat video_format; v4l2_std_id standard; @@ -145,6 +172,39 @@ static u8 PMT[] = { 0x00, 0x00, 0x00, 0x00 /* CRC32 */ }; +static u8 PMT_AC3[] = { + 0xc2, /* i2c register */ + 0x01, /* table number for encoder(1) */ + 0x47, /* sync */ + + 0x40, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0) */ + 0x10, /* PMT PID (0x0010) */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ + + 0x00, /* PSI pointer to start of table */ + + 0x02, /* TID (2) */ + 0xb0, 0x1a, /* section_syntax_indicator(1), section_length(26) */ + + 0x00, 0x01, /* program_number(1) */ + + 0xc1, /* version_number(0), current_next_indicator(1) */ + + 0x00, 0x00, /* section_number(0), last_section_number(0) */ + + 0xe1, 0x04, /* PCR_PID (0x0104) */ + + 0xf0, 0x00, /* program_info_length(0) */ + + 0x02, 0xe1, 0x00, 0xf0, 0x00, /* video stream type(2), pid */ + 0x06, 0xe1, 0x03, 0xf0, 0x03, /* audio stream type(6), pid */ + 0x6a, /* AC3 */ + 0x01, /* Descriptor_length(1) */ + 0x00, /* component_type_flag(0), bsid_flag(0), mainid_flag(0), asvc_flag(0), reserved flags(0) */ + + 0xED, 0xDE, 0x2D, 0xF3 /* CRC32 BE */ +}; + static struct saa6752hs_mpeg_params param_defaults = { .ts_pid_pmt = 16, @@ -157,12 +217,14 @@ static struct saa6752hs_mpeg_params param_defaults = .vi_bitrate_peak = 6000, .vi_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + .au_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2, .au_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_256K, + .au_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_256K, }; /* ---------------------------------------------------------------------- */ -static int saa6752hs_chip_command(struct i2c_client* client, +static int saa6752hs_chip_command(struct i2c_client *client, enum saa6752hs_command command) { unsigned char buf[3]; @@ -229,45 +291,61 @@ static int saa6752hs_chip_command(struct i2c_client* client, } -static int saa6752hs_set_bitrate(struct i2c_client* client, - struct saa6752hs_mpeg_params* params) +static inline void set_reg8(struct i2c_client *client, uint8_t reg, uint8_t val) +{ + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + i2c_master_send(client, buf, 2); +} + +static inline void set_reg16(struct i2c_client *client, uint8_t reg, uint16_t val) { u8 buf[3]; + + buf[0] = reg; + buf[1] = val >> 8; + buf[2] = val & 0xff; + i2c_master_send(client, buf, 3); +} + +static int saa6752hs_set_bitrate(struct i2c_client *client, + struct saa6752hs_state *h) +{ + struct saa6752hs_mpeg_params *params = &h->params; int tot_bitrate; + int is_384k; /* set the bitrate mode */ - buf[0] = 0x71; - buf[1] = (params->vi_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) ? 0 : 1; - i2c_master_send(client, buf, 2); + set_reg8(client, 0x71, + params->vi_bitrate_mode != V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); /* set the video bitrate */ if (params->vi_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) { /* set the target bitrate */ - buf[0] = 0x80; - buf[1] = params->vi_bitrate >> 8; - buf[2] = params->vi_bitrate & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0x80, params->vi_bitrate); /* set the max bitrate */ - buf[0] = 0x81; - buf[1] = params->vi_bitrate_peak >> 8; - buf[2] = params->vi_bitrate_peak & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0x81, params->vi_bitrate_peak); tot_bitrate = params->vi_bitrate_peak; } else { /* set the target bitrate (no max bitrate for CBR) */ - buf[0] = 0x81; - buf[1] = params->vi_bitrate >> 8; - buf[2] = params->vi_bitrate & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0x81, params->vi_bitrate); tot_bitrate = params->vi_bitrate; } + /* set the audio encoding */ + set_reg8(client, 0x93, + params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3); + /* set the audio bitrate */ - buf[0] = 0x94; - buf[1] = (V4L2_MPEG_AUDIO_L2_BITRATE_256K == params->au_l2_bitrate) ? 0 : 1; - i2c_master_send(client, buf, 2); - tot_bitrate += (V4L2_MPEG_AUDIO_L2_BITRATE_256K == params->au_l2_bitrate) ? 256 : 384; + if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) + is_384k = V4L2_MPEG_AUDIO_AC3_BITRATE_384K == params->au_ac3_bitrate; + else + is_384k = V4L2_MPEG_AUDIO_L2_BITRATE_384K == params->au_l2_bitrate; + set_reg8(client, 0x94, is_384k); + tot_bitrate += is_384k ? 384 : 256; /* Note: the total max bitrate is determined by adding the video and audio bitrates together and also adding an extra 768kbit/s to stay on the @@ -278,16 +356,12 @@ static int saa6752hs_set_bitrate(struct i2c_client* client, tot_bitrate = MPEG_TOTAL_TARGET_BITRATE_MAX; /* set the total bitrate */ - buf[0] = 0xb1; - buf[1] = tot_bitrate >> 8; - buf[2] = tot_bitrate & 0xff; - i2c_master_send(client, buf, 3); - + set_reg16(client, 0xb1, tot_bitrate); return 0; } -static void saa6752hs_set_subsampling(struct i2c_client* client, - struct v4l2_format* f) +static void saa6752hs_set_subsampling(struct i2c_client *client, + struct v4l2_format *f) { struct saa6752hs_state *h = i2c_get_clientdata(client); int dist_352, dist_480, dist_720; @@ -332,7 +406,7 @@ static void saa6752hs_set_subsampling(struct i2c_client* client, } -static int handle_ctrl(struct saa6752hs_mpeg_params *params, +static int handle_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params, struct v4l2_ext_control *ctrl, unsigned int cmd) { int old = 0, new; @@ -379,8 +453,9 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params, params->ts_pid_pcr = new; break; case V4L2_CID_MPEG_AUDIO_ENCODING: - old = V4L2_MPEG_AUDIO_ENCODING_LAYER_2; - if (set && new != old) + old = params->au_encoding; + if (set && new != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 && + (!has_ac3 || new != V4L2_MPEG_AUDIO_ENCODING_AC3)) return -ERANGE; new = old; break; @@ -395,6 +470,19 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params, new = V4L2_MPEG_AUDIO_L2_BITRATE_384K; params->au_l2_bitrate = new; break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!has_ac3) + return -EINVAL; + old = params->au_ac3_bitrate; + if (set && new != V4L2_MPEG_AUDIO_AC3_BITRATE_256K && + new != V4L2_MPEG_AUDIO_AC3_BITRATE_384K) + return -ERANGE; + if (new <= V4L2_MPEG_AUDIO_AC3_BITRATE_256K) + new = V4L2_MPEG_AUDIO_AC3_BITRATE_256K; + else + new = V4L2_MPEG_AUDIO_AC3_BITRATE_384K; + params->au_ac3_bitrate = new; + break; case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: old = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000; if (set && new != old) @@ -448,17 +536,19 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params, return 0; } -static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params, +static int saa6752hs_qctrl(struct saa6752hs_state *h, struct v4l2_queryctrl *qctrl) { + struct saa6752hs_mpeg_params *params = &h->params; int err; switch (qctrl->id) { case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_ENCODING_LAYER_2, - V4L2_MPEG_AUDIO_ENCODING_LAYER_2, 1, - V4L2_MPEG_AUDIO_ENCODING_LAYER_2); + h->has_ac3 ? V4L2_MPEG_AUDIO_ENCODING_AC3 : + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2); case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return v4l2_ctrl_query_fill(qctrl, @@ -466,6 +556,14 @@ static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params, V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1, V4L2_MPEG_AUDIO_L2_BITRATE_256K); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!h->has_ac3) + return -EINVAL; + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K, 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K); + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, @@ -512,44 +610,57 @@ static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params, return -EINVAL; } -static int saa6752hs_qmenu(struct saa6752hs_mpeg_params *params, +static int saa6752hs_qmenu(struct saa6752hs_state *h, struct v4l2_querymenu *qmenu) { - static const char *mpeg_audio_l2_bitrate[] = { - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "256 kbps", - "", - "384 kbps", - NULL + static const u32 mpeg_audio_encoding[] = { + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_CTRL_MENU_IDS_END + }; + static const u32 mpeg_audio_ac3_encoding[] = { + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_AC3, + V4L2_CTRL_MENU_IDS_END + }; + static u32 mpeg_audio_l2_bitrate[] = { + V4L2_MPEG_AUDIO_L2_BITRATE_256K, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, + V4L2_CTRL_MENU_IDS_END + }; + static u32 mpeg_audio_ac3_bitrate[] = { + V4L2_MPEG_AUDIO_AC3_BITRATE_256K, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K, + V4L2_CTRL_MENU_IDS_END }; struct v4l2_queryctrl qctrl; int err; qctrl.id = qmenu->id; - err = saa6752hs_qctrl(params, &qctrl); + err = saa6752hs_qctrl(h, &qctrl); if (err) return err; - if (qmenu->id == V4L2_CID_MPEG_AUDIO_L2_BITRATE) - return v4l2_ctrl_query_menu(qmenu, &qctrl, + switch (qmenu->id) { + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + return v4l2_ctrl_query_menu_valid_items(qmenu, mpeg_audio_l2_bitrate); - return v4l2_ctrl_query_menu(qmenu, &qctrl, - v4l2_ctrl_get_menu(qmenu->id)); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!h->has_ac3) + return -EINVAL; + return v4l2_ctrl_query_menu_valid_items(qmenu, + mpeg_audio_ac3_bitrate); + case V4L2_CID_MPEG_AUDIO_ENCODING: + return v4l2_ctrl_query_menu_valid_items(qmenu, + h->has_ac3 ? mpeg_audio_ac3_encoding : + mpeg_audio_encoding); + } + return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL); } -static int saa6752hs_init(struct i2c_client* client) +static int saa6752hs_init(struct i2c_client *client, u32 leading_null_bytes) { unsigned char buf[9], buf2[4]; struct saa6752hs_state *h; + unsigned size; u32 crc; unsigned char localPAT[256]; unsigned char localPMT[256]; @@ -557,45 +668,31 @@ static int saa6752hs_init(struct i2c_client* client) h = i2c_get_clientdata(client); /* Set video format - must be done first as it resets other settings */ - buf[0] = 0x41; - buf[1] = h->video_format; - i2c_master_send(client, buf, 2); + set_reg8(client, 0x41, h->video_format); /* Set number of lines in input signal */ - buf[0] = 0x40; - buf[1] = 0x00; - if (h->standard & V4L2_STD_525_60) - buf[1] = 0x01; - i2c_master_send(client, buf, 2); + set_reg8(client, 0x40, (h->standard & V4L2_STD_525_60) ? 1 : 0); /* set bitrate */ - saa6752hs_set_bitrate(client, &h->params); + saa6752hs_set_bitrate(client, h); /* Set GOP structure {3, 13} */ - buf[0] = 0x72; - buf[1] = 0x03; - buf[2] = 0x0D; - i2c_master_send(client,buf,3); + set_reg16(client, 0x72, 0x030d); /* Set minimum Q-scale {4} */ - buf[0] = 0x82; - buf[1] = 0x04; - i2c_master_send(client,buf,2); + set_reg8(client, 0x82, 0x04); /* Set maximum Q-scale {12} */ - buf[0] = 0x83; - buf[1] = 0x0C; - i2c_master_send(client,buf,2); + set_reg8(client, 0x83, 0x0c); /* Set Output Protocol */ - buf[0] = 0xD0; - buf[1] = 0x81; - i2c_master_send(client,buf,2); + set_reg8(client, 0xd0, 0x81); /* Set video output stream format {TS} */ - buf[0] = 0xB0; - buf[1] = 0x05; - i2c_master_send(client,buf,2); + set_reg8(client, 0xb0, 0x05); + + /* Set leading null byte for TS */ + set_reg16(client, 0xf6, leading_null_bytes); /* compute PAT */ memcpy(localPAT, PAT, sizeof(PAT)); @@ -608,7 +705,13 @@ static int saa6752hs_init(struct i2c_client* client) localPAT[sizeof(PAT) - 1] = crc & 0xFF; /* compute PMT */ - memcpy(localPMT, PMT, sizeof(PMT)); + if (h->params.au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) { + size = sizeof(PMT_AC3); + memcpy(localPMT, PMT_AC3, size); + } else { + size = sizeof(PMT); + memcpy(localPMT, PMT, size); + } localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); localPMT[4] = h->params.ts_pid_pmt & 0xff; localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F); @@ -617,40 +720,28 @@ static int saa6752hs_init(struct i2c_client* client) localPMT[21] = h->params.ts_pid_video & 0xFF; localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F); localPMT[26] = h->params.ts_pid_audio & 0xFF; - crc = crc32_be(~0, &localPMT[7], sizeof(PMT) - 7 - 4); - localPMT[sizeof(PMT) - 4] = (crc >> 24) & 0xFF; - localPMT[sizeof(PMT) - 3] = (crc >> 16) & 0xFF; - localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF; - localPMT[sizeof(PMT) - 1] = crc & 0xFF; + crc = crc32_be(~0, &localPMT[7], size - 7 - 4); + localPMT[size - 4] = (crc >> 24) & 0xFF; + localPMT[size - 3] = (crc >> 16) & 0xFF; + localPMT[size - 2] = (crc >> 8) & 0xFF; + localPMT[size - 1] = crc & 0xFF; /* Set Audio PID */ - buf[0] = 0xC1; - buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF; - buf[2] = h->params.ts_pid_audio & 0xFF; - i2c_master_send(client,buf,3); + set_reg16(client, 0xc1, h->params.ts_pid_audio); /* Set Video PID */ - buf[0] = 0xC0; - buf[1] = (h->params.ts_pid_video >> 8) & 0xFF; - buf[2] = h->params.ts_pid_video & 0xFF; - i2c_master_send(client,buf,3); + set_reg16(client, 0xc0, h->params.ts_pid_video); /* Set PCR PID */ - buf[0] = 0xC4; - buf[1] = (h->params.ts_pid_pcr >> 8) & 0xFF; - buf[2] = h->params.ts_pid_pcr & 0xFF; - i2c_master_send(client,buf,3); + set_reg16(client, 0xc4, h->params.ts_pid_pcr); /* Send SI tables */ - i2c_master_send(client,localPAT,sizeof(PAT)); - i2c_master_send(client,localPMT,sizeof(PMT)); + i2c_master_send(client, localPAT, sizeof(PAT)); + i2c_master_send(client, localPMT, size); /* mute then unmute audio. This removes buzzing artefacts */ - buf[0] = 0xa4; - buf[1] = 1; - i2c_master_send(client, buf, 2); - buf[1] = 0; - i2c_master_send(client, buf, 2); + set_reg8(client, 0xa4, 1); + set_reg8(client, 0xa4, 0); /* start it going */ saa6752hs_chip_command(client, SAA6752HS_COMMAND_START); @@ -688,45 +779,6 @@ static int saa6752hs_init(struct i2c_client* client) return 0; } -static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind) -{ - struct saa6752hs_state *h; - - - if (NULL == (h = kzalloc(sizeof(*h), GFP_KERNEL))) - return -ENOMEM; - h->client = client_template; - h->params = param_defaults; - h->client.adapter = adap; - h->client.addr = addr; - - /* Assume 625 input lines */ - h->standard = 0; - - i2c_set_clientdata(&h->client, h); - i2c_attach_client(&h->client); - - v4l_info(&h->client,"saa6752hs: chip found @ 0x%x\n", addr<<1); - return 0; -} - -static int saa6752hs_probe(struct i2c_adapter *adap) -{ - if (adap->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adap, &addr_data, saa6752hs_attach); - return 0; -} - -static int saa6752hs_detach(struct i2c_client *client) -{ - struct saa6752hs_state *h; - - h = i2c_get_clientdata(client); - i2c_detach_client(client); - kfree(h); - return 0; -} - static int saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) { @@ -737,14 +789,13 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) int i; switch (cmd) { + case VIDIOC_INT_INIT: + /* apply settings and start encoder */ + saa6752hs_init(client, *(u32 *)arg); + break; case VIDIOC_S_EXT_CTRLS: if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) return -EINVAL; - if (ctrls->count == 0) { - /* apply settings and start encoder */ - saa6752hs_init(client); - break; - } /* fall through */ case VIDIOC_TRY_EXT_CTRLS: case VIDIOC_G_EXT_CTRLS: @@ -752,7 +803,8 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) return -EINVAL; params = h->params; for (i = 0; i < ctrls->count; i++) { - if ((err = handle_ctrl(¶ms, ctrls->controls + i, cmd))) { + err = handle_ctrl(h->has_ac3, ¶ms, ctrls->controls + i, cmd); + if (err) { ctrls->error_idx = i; return err; } @@ -760,9 +812,9 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) h->params = params; break; case VIDIOC_QUERYCTRL: - return saa6752hs_qctrl(&h->params, arg); + return saa6752hs_qctrl(h, arg); case VIDIOC_QUERYMENU: - return saa6752hs_qmenu(&h->params, arg); + return saa6752hs_qmenu(h, arg); case VIDIOC_G_FMT: { struct v4l2_format *f = arg; @@ -785,6 +837,11 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOC_S_STD: h->standard = *((v4l2_std_id *) arg); break; + + case VIDIOC_G_CHIP_IDENT: + return v4l2_chip_ident_i2c_client(client, + arg, h->chip, h->revision); + default: /* nothing */ break; @@ -793,36 +850,55 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) return err; } -/* ----------------------------------------------------------------------- */ +static int saa6752hs_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa6752hs_state *h = kzalloc(sizeof(*h), GFP_KERNEL); + u8 addr = 0x13; + u8 data[12]; -static struct i2c_driver driver = { - .driver = { - .name = "saa6752hs", - }, - .id = I2C_DRIVERID_SAA6752HS, - .attach_adapter = saa6752hs_probe, - .detach_client = saa6752hs_detach, - .command = saa6752hs_command, -}; + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + if (h == NULL) + return -ENOMEM; -static struct i2c_client client_template = -{ - .name = "saa6752hs", - .driver = &driver, -}; + i2c_master_send(client, &addr, 1); + i2c_master_recv(client, data, sizeof(data)); + h->chip = V4L2_IDENT_SAA6752HS; + h->revision = (data[8] << 8) | data[9]; + h->has_ac3 = 0; + if (h->revision == 0x0206) { + h->chip = V4L2_IDENT_SAA6752HS_AC3; + h->has_ac3 = 1; + v4l_info(client, "support AC-3\n"); + } + h->params = param_defaults; + h->standard = 0; /* Assume 625 input lines */ -static int __init saa6752hs_init_module(void) -{ - return i2c_add_driver(&driver); + i2c_set_clientdata(client, h); + return 0; } -static void __exit saa6752hs_cleanup_module(void) +static int saa6752hs_remove(struct i2c_client *client) { - i2c_del_driver(&driver); + kfree(i2c_get_clientdata(client)); + return 0; } -module_init(saa6752hs_init_module); -module_exit(saa6752hs_cleanup_module); +static const struct i2c_device_id saa6752hs_id[] = { + { "saa6752hs", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa6752hs_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa6752hs", + .driverid = I2C_DRIVERID_SAA6752HS, + .command = saa6752hs_command, + .probe = saa6752hs_probe, + .remove = saa6752hs_remove, + .id_table = saa6752hs_id, +}; /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 9929d20320b..26194a0ce92 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -488,10 +488,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, period_size = params_period_bytes(hw_params); periods = params_periods(hw_params); - snd_assert(period_size >= 0x100 && period_size <= 0x10000, - return -EINVAL); - snd_assert(periods >= 4, return -EINVAL); - snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL); + if (period_size < 0x100 || period_size > 0x10000) + return -EINVAL; + if (periods < 4) + return -EINVAL; + if (period_size * periods > 1024 * 1024) + return -EINVAL; dev = saa7134->dev; @@ -942,7 +944,8 @@ static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip) unsigned int idx; int err; - snd_assert(chip != NULL, return -EINVAL); + if (snd_BUG_ON(!chip)) + return -EINVAL; strcpy(card->mixername, "SAA7134 Mixer"); for (idx = 0; idx < ARRAY_SIZE(snd_saa7134_controls); idx++) { diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 98364d171de..ddc5402c5fb 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3260,6 +3260,7 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_HAUPPAUGE_HVR1110] = { /* Thomas Genty <tomlohave@gmail.com> */ + /* David Bentham <db260179@hotmail.com> */ .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, @@ -3268,23 +3269,26 @@ struct saa7134_board saa7134_boards[] = { .radio_addr = ADDR_UNSET, .tuner_config = 1, .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200100, .inputs = {{ .name = name_tv, .vmux = 1, .amux = TV, .tv = 1, - },{ - .name = name_comp1, - .vmux = 3, - .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */ - },{ - .name = name_svideo, - .vmux = 8, - .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */ - }}, + .gpio = 0x0000100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, .radio = { .name = name_radio, - .amux = TV, + .amux = TV, + .gpio = 0x0200100, }, }, [SAA7134_BOARD_CINERGY_HT_PCMCIA] = { @@ -3388,6 +3392,42 @@ struct saa7134_board saa7134_boards[] = { .amux = 0, }, }, + [SAA7134_BOARD_ENCORE_ENLTV_FM53] = { + .name = "Encore ENLTV-FM v5.3", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x7000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = 1, + .tv = 1, + .gpio = 0x50000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = 2, + .gpio = 0x2000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = 2, + .gpio = 0x2000, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = 1, + }, + .mute = { + .name = name_mute, + .gpio = 0xf000, + .amux = 0, + }, + }, [SAA7134_BOARD_CINERGY_HT_PCI] = { .name = "Terratec Cinergy HT PCI", .audio_clock = 0x00187de7, @@ -3631,6 +3671,40 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }}, }, + [SAA7134_BOARD_AVERMEDIA_M135A] = { + .name = "Avermedia PCI pure analog (M135A)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .gpiomask = 0x020200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00200000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, [SAA7134_BOARD_BEHOLD_401] = { /* Beholder Intl. Ltd. 2008 */ /*Dmitry Belimov <d.belimov@gmail.com> */ @@ -4409,6 +4483,129 @@ struct saa7134_board saa7134_boards[] = { /* no DVB support for now */ /* .mpeg = SAA7134_MPEG_DVB, */ }, + [SAA7134_BOARD_ASUSTeK_TIGER_3IN1] = { + .name = "Asus Tiger 3in1", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_REAL_ANGEL_220] = { + .name = "Zogis Real Angel 220", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x801a8087, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + .gpio = 0x624000, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + }, { + .name = name_svideo, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x624001, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, + [SAA7134_BOARD_ADS_INSTANT_HDTV_PCI] = { + .name = "ADS Tech Instant HDTV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 4, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, + [SAA7134_BOARD_ASUSTeK_TIGER] = { + .name = "Asus Tiger Rev:1.00", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 0, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -4777,6 +4974,12 @@ struct pci_device_id saa7134_pci_tbl[] = { },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf11d, + .driver_data = SAA7134_BOARD_AVERMEDIA_M135A, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = PCI_VENDOR_ID_PHILIPS, .subdevice = 0x2004, @@ -5157,6 +5360,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM, },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1a7f, + .subdevice = 0x2008, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM53, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x153b, .subdevice = 0x1175, @@ -5183,8 +5392,8 @@ struct pci_device_id saa7134_pci_tbl[] = { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1043, - .subdevice = 0x4857, - .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL, + .subdevice = 0x4857, /* REV:1.00 */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -5415,6 +5624,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_VIDEOMATE_T750, }, { .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x1421, + .subdevice = 0x0380, + .driver_data = SAA7134_BOARD_ADS_INSTANT_HDTV_PCI, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x5169, .subdevice = 0x1502, @@ -5432,6 +5647,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0xf636, .driver_data = SAA7134_BOARD_AVERMEDIA_M103, }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4878, /* REV:1.02G */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -5540,7 +5761,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, return 0; } -int saa7134_tuner_callback(void *priv, int command, int arg) +int saa7134_tuner_callback(void *priv, int component, int command, int arg) { struct saa7134_dev *dev = priv; if (dev != NULL) { @@ -5620,6 +5841,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_M135A: /* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: @@ -5644,6 +5866,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_A16AR: case SAA7134_BOARD_ENCORE_ENLTV: case SAA7134_BOARD_ENCORE_ENLTV_FM: + case SAA7134_BOARD_ENCORE_ENLTV_FM53: case SAA7134_BOARD_10MOONSTVMASTER3: case SAA7134_BOARD_BEHOLD_401: case SAA7134_BOARD_BEHOLD_403: @@ -5656,6 +5879,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_505FM: case SAA7134_BOARD_BEHOLD_507_9FM: case SAA7134_BOARD_GENIUS_TVGO_A11MCE: + case SAA7134_BOARD_REAL_ANGEL_220: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: @@ -5745,6 +5969,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_UPMOST_PURPLE_TV: + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: case SAA7134_BOARD_HAUPPAUGE_HVR1110: case SAA7134_BOARD_BEHOLD_607_9FM: case SAA7134_BOARD_BEHOLD_M6: @@ -5987,6 +6212,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_KWORLD_DVBT_210: case SAA7134_BOARD_TEVION_DVBT_220RF: + case SAA7134_BOARD_ASUSTeK_TIGER: case SAA7134_BOARD_ASUSTeK_P7131_DUAL: case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: case SAA7134_BOARD_MEDION_MD8800_QUADRO: @@ -6002,6 +6228,14 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); break; } + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr = 0x0b, .flags = 0, .buf = data, + .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } case SAA7134_BOARD_FLYDVB_TRIO: { u8 data[] = { 0x3c, 0x33, 0x62}; @@ -6027,6 +6261,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); break; } + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: { /* enable tuner */ diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 75d618415f4..b686bfabbde 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -215,7 +215,7 @@ unsigned long saa7134_buffer_base(struct saa7134_buf *buf) int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt) { __le32 *cpu; - dma_addr_t dma_addr; + dma_addr_t dma_addr = 0; cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr); if (NULL == cpu) @@ -359,32 +359,6 @@ void saa7134_buffer_timeout(unsigned long data) spin_unlock_irqrestore(&dev->slock,flags); } -/* resends a current buffer in queue after resume */ - -static int saa7134_buffer_requeue(struct saa7134_dev *dev, - struct saa7134_dmaqueue *q) -{ - struct saa7134_buf *buf, *next; - - assert_spin_locked(&dev->slock); - - buf = q->curr; - next = buf; - dprintk("buffer_requeue\n"); - - if (!buf) - return 0; - - dprintk("buffer_requeue : resending active buffers \n"); - - if (!list_empty(&q->queue)) - next = list_entry(q->queue.next, struct saa7134_buf, - vb.queue); - buf->activate(dev, buf, next); - - return 0; -} - /* ------------------------------------------------------------------ */ int saa7134_set_dmabits(struct saa7134_dev *dev) @@ -442,9 +416,7 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) /* TS capture -- dma 5 */ if (dev->ts_q.curr) { ctrl |= SAA7134_MAIN_CTRL_TE5; - irq |= SAA7134_IRQ1_INTE_RA2_3 | - SAA7134_IRQ1_INTE_RA2_2 | - SAA7134_IRQ1_INTE_RA2_1 | + irq |= SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0; } @@ -727,6 +699,10 @@ static int saa7134_hw_enable2(struct saa7134_dev *dev) irq2_mask |= SAA7134_IRQ2_INTE_GPIO18A; } + if (dev->has_remote == SAA7134_REMOTE_I2C) { + request_module("ir-kbd-i2c"); + } + saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, irq2_mask); @@ -1139,6 +1115,32 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev) } #ifdef CONFIG_PM + +/* resends a current buffer in queue after resume */ +static int saa7134_buffer_requeue(struct saa7134_dev *dev, + struct saa7134_dmaqueue *q) +{ + struct saa7134_buf *buf, *next; + + assert_spin_locked(&dev->slock); + + buf = q->curr; + next = buf; + dprintk("buffer_requeue\n"); + + if (!buf) + return 0; + + dprintk("buffer_requeue : resending active buffers \n"); + + if (!list_empty(&q->queue)) + next = list_entry(q->queue.next, struct saa7134_buf, + vb.queue); + buf->activate(dev, buf, next); + + return 0; +} + static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state) { diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index be48b9b66a6..8c46115d4c7 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -535,11 +535,16 @@ static int configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf, struct tda827x_config *tuner_conf) { - dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); - if (dev->dvb.frontend) { + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + + fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); + if (fe0->dvb.frontend) { if (cdec_conf->i2c_gate) - dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; - if (dvb_attach(tda827x_attach, dev->dvb.frontend, + fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + if (dvb_attach(tda827x_attach, fe0->dvb.frontend, cdec_conf->tuner_address, &dev->i2c_adap, tuner_conf)) return 0; @@ -553,7 +558,6 @@ static int configure_tda827x_fe(struct saa7134_dev *dev, /* ------------------------------------------------------------------ */ static struct tda827x_config tda827x_cfg_0 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 0, @@ -561,7 +565,6 @@ static struct tda827x_config tda827x_cfg_0 = { }; static struct tda827x_config tda827x_cfg_1 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 1, @@ -569,7 +572,6 @@ static struct tda827x_config tda827x_cfg_1 = { }; static struct tda827x_config tda827x_cfg_2 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 2, @@ -577,7 +579,6 @@ static struct tda827x_config tda827x_cfg_2 = { }; static struct tda827x_config tda827x_cfg_2_sw42 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 2, @@ -799,6 +800,20 @@ static struct tda1004x_config twinhan_dtv_dvb_3056_config = { .request_firmware = philips_tda1004x_request_firmware }; +static struct tda1004x_config asus_tiger_3in1_config = { + .demod_address = 0x0b, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware +}; + /* ------------------------------------------------------------------ * special case: this card uses saa713x GPIO22 for the mode switch */ @@ -822,7 +837,6 @@ static int ads_duo_tuner_sleep(struct dvb_frontend *fe) } static struct tda827x_config ads_duo_cfg = { - .tuner_callback = saa7134_tuner_callback, .init = ads_duo_tuner_init, .sleep = ads_duo_tuner_sleep, .config = 0 @@ -935,12 +949,30 @@ static int dvb_init(struct saa7134_dev *dev) { int ret; int attach_xc3028 = 0; + struct videobuf_dvb_frontend *fe0; + + /* FIXME: add support for multi-frontend */ + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + dev->frontends.active_fe_id = 0; + + printk(KERN_INFO "%s() allocating 1 frontend\n", __func__); + + if (videobuf_dvb_alloc_frontend(&dev->frontends, 1) == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; /* init struct videobuf_dvb */ dev->ts.nr_bufs = 32; dev->ts.nr_packets = 32*4; - dev->dvb.name = dev->name; - videobuf_queue_sg_init(&dev->dvb.dvbq, &saa7134_ts_qops, + fe0->dvb.name = dev->name; + videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_ALTERNATE, @@ -950,47 +982,47 @@ static int dvb_init(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: dprintk("pinnacle 300i dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, + fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; } break; case SAA7134_BOARD_AVERMEDIA_777: case SAA7134_BOARD_AVERMEDIA_A16AR: dprintk("avertv 777 dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, &dev->i2c_adap); - if (dev->dvb.frontend) { - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x61, TUNER_PHILIPS_TD1316); } break; case SAA7134_BOARD_AVERMEDIA_A16D: dprintk("AverMedia A16D dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_xc3028_mt352_dev, &dev->i2c_adap); attach_xc3028 = 1; break; case SAA7134_BOARD_MD7134: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &medion_cardbus, &dev->i2c_adap); - if (dev->dvb.frontend) { - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, medion_cardbus.tuner_address, TUNER_PHILIPS_FMD1216ME_MK3); } break; case SAA7134_BOARD_PHILIPS_TOUGH: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_tu1216_60_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; } break; case SAA7134_BOARD_FLYDVBTDUO: @@ -1001,24 +1033,24 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_PHILIPS_EUROPA: case SAA7134_BOARD_VIDEOMATE_DVBT_300: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_europa_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; - dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; - dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; - dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; } break; case SAA7134_BOARD_VIDEOMATE_DVBT_200: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_tu1216_61_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; } break; case SAA7134_BOARD_KWORLD_DVBT_210: @@ -1057,14 +1089,14 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_0) < 0) goto dettach_frontend; } else { /* satellite */ - dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, + if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); goto dettach_frontend; @@ -1074,11 +1106,11 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &ads_tech_duo_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda827x_attach,dev->dvb.frontend, + if (fe0->dvb.frontend) { + if (dvb_attach(tda827x_attach,fe0->dvb.frontend, ads_tech_duo_config.tuner_address, &dev->i2c_adap, &ads_duo_cfg) == NULL) { wprintk("no tda827x tuner found at addr: %02x\n", @@ -1099,15 +1131,15 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_0) < 0) goto dettach_frontend; } else { /* satellite */ - dev->dvb.frontend = dvb_attach(tda10086_attach, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - struct dvb_frontend *fe = dev->dvb.frontend; + if (fe0->dvb.frontend) { + struct dvb_frontend *fe = fe0->dvb.frontend; u8 dev_id = dev->eedata[2]; u8 data = 0xc4; struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; - if (dvb_attach(tda826x_attach, dev->dvb.frontend, + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Medion Quadro, no tda826x " "found !\n", __func__); @@ -1141,30 +1173,31 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: - dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, &dev->i2c_adap); - if (dev->dvb.frontend) - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + if (fe0->dvb.frontend) + dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_TDHU2); break; + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: - dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, &dev->i2c_adap); - if (dev->dvb.frontend) - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D); break; case SAA7134_BOARD_FLYDVBS_LR300: - dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: No tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(isl6421_attach, dev->dvb.frontend, + if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: No ISL6421 found!\n", __func__); goto dettach_frontend; @@ -1172,25 +1205,25 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &medion_cardbus, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; - dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, medion_cardbus.tuner_address, TUNER_PHILIPS_FMD1216ME_MK3); } break; case SAA7134_BOARD_VIDEOMATE_DVBT_200A: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_europa_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; } break; case SAA7134_BOARD_CINERGY_HT_PCMCIA: @@ -1229,15 +1262,15 @@ static int dvb_init(struct saa7134_dev *dev) goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_SNAKE: - dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: No tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, &dev->i2c_adap, 0, 0) == NULL) { wprintk("%s: No lnbp21 found!\n", __func__); goto dettach_frontend; @@ -1259,24 +1292,24 @@ static int dvb_init(struct saa7134_dev *dev) saa7134_set_gpio(dev, 25, 0); msleep(10); saa7134_set_gpio(dev, 25, 1); - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_xc3028_mt352_dev, &dev->i2c_adap); attach_xc3028 = 1; break; case SAA7134_BOARD_MD7134_BRIDGE_2: - dev->dvb.frontend = dvb_attach(tda10086_attach, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &sd1878_4m, &dev->i2c_adap); - if (dev->dvb.frontend) { + if (fe0->dvb.frontend) { struct dvb_frontend *fe; - if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, + if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { wprintk("%s: MD7134 DVB-S, no SD1878 " "found !\n", __func__); goto dettach_frontend; } /* we need to open the i2c gate (we know it exists) */ - fe = dev->dvb.frontend; + fe = fe0->dvb.frontend; fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, &dev->i2c_adap, 0x08, 0, 0) == NULL) { @@ -1295,11 +1328,41 @@ static int dvb_init(struct saa7134_dev *dev) saa7134_set_gpio(dev, 25, 0); msleep(10); saa7134_set_gpio(dev, 25, 1); - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_xc3028_mt352_dev, &dev->i2c_adap); attach_xc3028 = 1; break; + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; + } else { /* satellite */ + fe0->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, + fe0->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no " + "tda826x found!\n", __func__); + goto dettach_frontend; + } + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no lnbp21" + " found!\n", __func__); + goto dettach_frontend; + } + } + } + break; + case SAA7134_BOARD_ASUSTeK_TIGER: + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; + break; default: wprintk("Huh? unknown DVB card?\n"); break; @@ -1312,10 +1375,10 @@ static int dvb_init(struct saa7134_dev *dev) .i2c_addr = 0x61, }; - if (!dev->dvb.frontend) + if (!fe0->dvb.frontend) return -1; - fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); if (!fe) { printk(KERN_ERR "%s/2: xc3028 attach failed\n", dev->name); @@ -1323,38 +1386,47 @@ static int dvb_init(struct saa7134_dev *dev) } } - if (NULL == dev->dvb.frontend) { + if (NULL == fe0->dvb.frontend) { printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); return -1; } + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = saa7134_tuner_callback; /* register everything else */ - ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev, - adapter_nr); + ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, 0); /* this sequence is necessary to make the tda1004x load its firmware * and to enter analog mode of hybrid boards */ if (!ret) { - if (dev->dvb.frontend->ops.init) - dev->dvb.frontend->ops.init(dev->dvb.frontend); - if (dev->dvb.frontend->ops.sleep) - dev->dvb.frontend->ops.sleep(dev->dvb.frontend); - if (dev->dvb.frontend->ops.tuner_ops.sleep) - dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend); + if (fe0->dvb.frontend->ops.init) + fe0->dvb.frontend->ops.init(fe0->dvb.frontend); + if (fe0->dvb.frontend->ops.sleep) + fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); + if (fe0->dvb.frontend->ops.tuner_ops.sleep) + fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); } return ret; dettach_frontend: - if (dev->dvb.frontend) - dvb_frontend_detach(dev->dvb.frontend); - dev->dvb.frontend = NULL; + if (fe0->dvb.frontend) + dvb_frontend_detach(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; return -1; } static int dvb_fini(struct saa7134_dev *dev) { + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + /* FIXME: I suspect that this code is bogus, since the entry for Pinnacle 300I DVB-T PAL already defines the proper init to allow the detection of mt2032 (TDA9887_PORT2_INACTIVE) @@ -1374,7 +1446,7 @@ static int dvb_fini(struct saa7134_dev *dev) u8 data = 0x80; struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; struct dvb_frontend *fe; - fe = dev->dvb.frontend; + fe = fe0->dvb.frontend; if (fe->ops.i2c_gate_ctrl) { fe->ops.i2c_gate_ctrl(fe, 1); i2c_transfer(&dev->i2c_adap, &msg, 1); @@ -1382,8 +1454,8 @@ static int dvb_fini(struct saa7134_dev *dev) } } } - if (dev->dvb.frontend) - videobuf_dvb_unregister(&dev->dvb); + if (fe0->dvb.frontend) + videobuf_dvb_unregister_bus(&dev->frontends); return 0; } diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index c0c5d7509c2..9a8766a78a0 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -29,6 +29,7 @@ #include <media/saa6752hs.h> #include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> /* ------------------------------------------------------------------ */ @@ -63,10 +64,19 @@ static void ts_reset_encoder(struct saa7134_dev* dev) static int ts_init_encoder(struct saa7134_dev* dev) { - struct v4l2_ext_controls ctrls = { V4L2_CTRL_CLASS_MPEG, 0 }; + u32 leading_null_bytes = 0; + /* If more cards start to need this, then this + should probably be added to the card definitions. */ + switch (dev->board) { + case SAA7134_BOARD_BEHOLD_M6: + case SAA7134_BOARD_BEHOLD_M63: + case SAA7134_BOARD_BEHOLD_M6_EXTRA: + leading_null_bytes = 1; + break; + } ts_reset_encoder(dev); - saa7134_i2c_call_clients(dev, VIDIOC_S_EXT_CTRLS, &ctrls); + saa7134_i2c_call_clients(dev, VIDIOC_INT_INIT, &leading_null_bytes); dev->empress_started = 1; return 0; } @@ -79,9 +89,11 @@ static int ts_open(struct inode *inode, struct file *file) struct saa7134_dev *dev; int err; + lock_kernel(); list_for_each_entry(dev, &saa7134_devlist, devlist) if (dev->empress_dev && dev->empress_dev->minor == minor) goto found; + unlock_kernel(); return -ENODEV; found: @@ -103,6 +115,7 @@ static int ts_open(struct inode *inode, struct file *file) done_up: mutex_unlock(&dev->empress_tsq.vb_lock); done: + unlock_kernel(); return err; } @@ -290,15 +303,6 @@ static int empress_streamoff(struct file *file, void *priv, return videobuf_streamoff(&dev->empress_tsq); } -static int saa7134_i2c_call_saa6752(struct saa7134_dev *dev, - unsigned int cmd, void *arg) -{ - if (dev->mpeg_i2c_client == NULL) - return -EINVAL; - return dev->mpeg_i2c_client->driver->command(dev->mpeg_i2c_client, - cmd, arg); -} - static int empress_s_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { @@ -400,6 +404,39 @@ static int empress_querymenu(struct file *file, void *priv, return saa7134_i2c_call_saa6752(dev, VIDIOC_QUERYMENU, c); } +static int empress_g_chip_ident(struct file *file, void *fh, + struct v4l2_chip_ident *chip) +{ + struct saa7134_dev *dev = file->private_data; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (dev->mpeg_i2c_client == NULL) + return -EINVAL; + if (chip->match_type == V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match_chip == I2C_DRIVERID_SAA6752HS) + return saa7134_i2c_call_saa6752(dev, VIDIOC_G_CHIP_IDENT, chip); + if (chip->match_type == V4L2_CHIP_MATCH_I2C_ADDR && + chip->match_chip == dev->mpeg_i2c_client->addr) + return saa7134_i2c_call_saa6752(dev, VIDIOC_G_CHIP_IDENT, chip); + return -EINVAL; +} + +static int empress_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_dev *dev = file->private_data; + + return saa7134_s_std_internal(dev, NULL, id); +} + +static int empress_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_dev *dev = file->private_data; + + *id = dev->tvnorm->id; + return 0; +} + static const struct file_operations ts_fops = { .owner = THIS_MODULE, @@ -428,11 +465,13 @@ static const struct v4l2_ioctl_ops ts_ioctl_ops = { .vidioc_enum_input = empress_enum_input, .vidioc_g_input = empress_g_input, .vidioc_s_input = empress_s_input, - .vidioc_queryctrl = empress_queryctrl, .vidioc_querymenu = empress_querymenu, .vidioc_g_ctrl = empress_g_ctrl, .vidioc_s_ctrl = empress_s_ctrl, + .vidioc_g_chip_ident = empress_g_chip_ident, + .vidioc_s_std = empress_s_std, + .vidioc_g_std = empress_g_std, }; /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 5f713e63768..20c1b33caf7 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -337,6 +337,7 @@ static int attach_inform(struct i2c_client *client) case 0x47: case 0x71: case 0x2d: + case 0x30: { struct IR_i2c *ir = i2c_get_clientdata(client); d1printk("%s i2c IR detected (%s).\n", @@ -427,6 +428,16 @@ void saa7134_i2c_call_clients(struct saa7134_dev *dev, i2c_clients_command(&dev->i2c_adap, cmd, arg); } +int saa7134_i2c_call_saa6752(struct saa7134_dev *dev, + unsigned int cmd, void *arg) +{ + if (dev->mpeg_i2c_client == NULL) + return -EINVAL; + return dev->mpeg_i2c_client->driver->command(dev->mpeg_i2c_client, + cmd, arg); +} +EXPORT_SYMBOL_GPL(saa7134_i2c_call_saa6752); + int saa7134_i2c_register(struct saa7134_dev *dev) { dev->i2c_adap = saa7134_adap_template; diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ad08d13dffd..c53fd5f9f6b 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -62,8 +62,11 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of " #define i2cdprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) -/** rc5 functions */ +/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */ static int saa7134_rc5_irq(struct saa7134_dev *dev); +static int saa7134_nec_irq(struct saa7134_dev *dev); +static void nec_task(unsigned long data); +static void saa7134_nec_timer(unsigned long data); /* -------------------- GPIO generic keycode builder -------------------- */ @@ -115,6 +118,53 @@ static int build_key(struct saa7134_dev *dev) /* --------------------- Chip specific I2C key builders ----------------- */ +static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + int gpio; + + /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c.adapter->algo_data; + if (dev == NULL) { + dprintk("get_key_msi_tvanywhere_plus: " + "gir->c.adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x40 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x40 is not low. */ + + if (gpio & 0x40) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(&ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -280,7 +330,9 @@ void saa7134_input_irq(struct saa7134_dev *dev) { struct card_ir *ir = dev->remote; - if (!ir->polling && !ir->rc5_gpio) { + if (ir->nec_gpio) { + saa7134_nec_irq(dev); + } else if (!ir->polling && !ir->rc5_gpio) { build_key(dev); } else if (ir->rc5_gpio) { saa7134_rc5_irq(dev); @@ -316,6 +368,10 @@ void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir) ir->addr = 0x17; ir->rc5_key_timeout = ir_rc5_key_timeout; ir->rc5_remote_gap = ir_rc5_remote_gap; + } else if (ir->nec_gpio) { + setup_timer(&ir->timer_keyup, saa7134_nec_timer, + (unsigned long)dev); + tasklet_init(&ir->tlet, nec_task, (unsigned long)dev); } } @@ -335,6 +391,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) u32 mask_keyup = 0; int polling = 0; int rc5_gpio = 0; + int nec_gpio = 0; int ir_type = IR_TYPE_OTHER; int err; @@ -391,6 +448,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE0, 0x4); saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; + case SAA7134_BOARD_AVERMEDIA_M135A: + ir_codes = ir_codes_avermedia_m135a; + mask_keydown = 0x0040000; + mask_keycode = 0x00013f; + nec_gpio = 1; + break; case SAA7134_BOARD_AVERMEDIA_777: case SAA7134_BOARD_AVERMEDIA_A16AR: ir_codes = ir_codes_avermedia; @@ -499,6 +562,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keyup = 0x040000; polling = 50; // ms break; + case SAA7134_BOARD_ENCORE_ENLTV_FM53: + ir_codes = ir_codes_encore_enltv_fm53; + mask_keydown = 0x0040000; + mask_keycode = 0x00007f; + nec_gpio = 1; + break; case SAA7134_BOARD_10MOONSTVMASTER3: ir_codes = ir_codes_encore_enltv; mask_keycode = 0x5f80000; @@ -511,6 +580,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keydown = 0xf00000; polling = 50; /* ms */ break; + case SAA7134_BOARD_REAL_ANGEL_220: + ir_codes = ir_codes_real_audio_220_32_keys; + mask_keycode = 0x3f00; + mask_keyup = 0x4000; + polling = 50; /* ms */ + break; } if (NULL == ir_codes) { printk("%s: Oops: IR config error [card=%d]\n", @@ -533,6 +608,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) ir->mask_keyup = mask_keyup; ir->polling = polling; ir->rc5_gpio = rc5_gpio; + ir->nec_gpio = nec_gpio; /* init input device */ snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)", @@ -612,6 +688,11 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) ir->get_key = get_key_purpletv; ir->ir_codes = ir_codes_purpletv; break; + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: + snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus"); + ir->get_key = get_key_msi_tvanywhere_plus; + ir->ir_codes = ir_codes_msi_tvanywhere_plus; + break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110"); ir->get_key = get_key_hvr1110; @@ -675,8 +756,125 @@ static int saa7134_rc5_irq(struct saa7134_dev *dev) return 1; } -/* ---------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: + +/* On NEC protocol, One has 2.25 ms, and zero has 1.125 ms + The first pulse (start) has 9 + 4.5 ms */ + +static void saa7134_nec_timer(unsigned long data) +{ + struct saa7134_dev *dev = (struct saa7134_dev *) data; + struct card_ir *ir = dev->remote; + + dprintk("Cancel key repeat\n"); + + ir_input_nokey(ir->dev, &ir->ir); +} + +static void nec_task(unsigned long data) +{ + struct saa7134_dev *dev = (struct saa7134_dev *) data; + struct card_ir *ir; + struct timeval tv; + int count, pulse, oldpulse, gap; + u32 ircode = 0, not_code = 0; + int ngap = 0; + + if (!data) { + printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n"); + /* GPIO will be kept disabled */ + return; + } + + ir = dev->remote; + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown; + pulse = oldpulse; + + do_gettimeofday(&tv); + ir->base_time = tv; + + /* Decode NEC pulsecode. This code can take up to 76.5 ms to run. + Unfortunately, using IRQ to decode pulse didn't work, since it uses + a pulse train of 38KHz. This means one pulse on each 52 us + */ + do { + /* Wait until the end of pulse/space or 5 ms */ + for (count = 0; count < 500; count++) { + udelay(10); + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) + & ir->mask_keydown; + if (pulse != oldpulse) + break; + } + + do_gettimeofday(&tv); + gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + + tv.tv_usec - ir->base_time.tv_usec; + + if (!pulse) { + /* Bit 0 has 560 us, while bit 1 has 1120 us. + Do something only if bit == 1 + */ + if (ngap && (gap > 560 + 280)) { + unsigned int shift = ngap - 1; + + /* Address first, then command */ + if (shift < 8) { + shift += 8; + ircode |= 1 << shift; + } else if (shift < 16) { + not_code |= 1 << shift; + } else if (shift < 24) { + shift -= 16; + ircode |= 1 << shift; + } else { + shift -= 24; + not_code |= 1 << shift; + } + } + ngap++; + } + + + ir->base_time = tv; + + /* TIMEOUT - Long pulse */ + if (gap >= 5000) + break; + oldpulse = pulse; + } while (ngap < 32); + + if (ngap == 32) { + /* FIXME: should check if not_code == ~ircode */ + ir->code = ir_extract_bits(ircode, ir->mask_keycode); + + dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n", + ir->code, ircode, not_code); + + ir_input_keydown(ir->dev, &ir->ir, ir->code, ir->code); + } else + dprintk("Repeat last key\n"); + + /* Keep repeating the last key */ + mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150)); + + saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18); +} + +static int saa7134_nec_irq(struct saa7134_dev *dev) +{ + struct card_ir *ir = dev->remote; + + saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18); + tasklet_schedule(&ir->tlet); + + return 1; +} diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index eae72fd60ce..ef55a59f0cd 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -66,11 +66,29 @@ static int buffer_activate(struct saa7134_dev *dev, saa7134_set_dmabits(dev); mod_timer(&dev->ts_q.timeout, jiffies+BUFFER_TIMEOUT); + + if (dev->ts_state == SAA7134_TS_BUFF_DONE) { + /* Clear TS cache */ + dev->buff_cnt = 0; + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x03); + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x01); + + /* TS clock non-inverted */ + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + + /* Start TS stream */ + saa_writeb(SAA7134_TS_SERIAL0, 0x40); + saa_writeb(SAA7134_TS_PARALLEL, 0xEC); + dev->ts_state = SAA7134_TS_STARTED; + } + return 0; } static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, - enum v4l2_field field) + enum v4l2_field field) { struct saa7134_dev *dev = q->priv_data; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); @@ -110,16 +128,22 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, goto oops; } - /* dma: setup channel 5 (= TS) */ - control = SAA7134_RS_CONTROL_BURST_16 | - SAA7134_RS_CONTROL_ME | - (buf->pt->dma >> 12); - - saa_writeb(SAA7134_TS_DMA0, ((lines-1)&0xff)); - saa_writeb(SAA7134_TS_DMA1, (((lines-1)>>8)&0xff)); - saa_writeb(SAA7134_TS_DMA2, ((((lines-1)>>16)&0x3f) | 0x00)); /* TSNOPIT=0, TSCOLAP=0 */ - saa_writel(SAA7134_RS_PITCH(5),TS_PACKET_SIZE); - saa_writel(SAA7134_RS_CONTROL(5),control); + dev->buff_cnt++; + + if (dev->buff_cnt == dev->ts.nr_bufs) { + dev->ts_state = SAA7134_TS_BUFF_DONE; + /* dma: setup channel 5 (= TS) */ + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (buf->pt->dma >> 12); + + saa_writeb(SAA7134_TS_DMA0, (lines - 1) & 0xff); + saa_writeb(SAA7134_TS_DMA1, ((lines - 1) >> 8) & 0xff); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, (((lines - 1) >> 16) & 0x3f) | 0x00); + saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5), control); + } buf->vb.state = VIDEOBUF_PREPARED; buf->activate = buffer_activate; @@ -140,6 +164,8 @@ buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) if (0 == *count) *count = dev->ts.nr_bufs; *count = saa7134_buffer_count(*size,*count); + dev->buff_cnt = 0; + dev->ts_state = SAA7134_TS_STOPPED; return 0; } @@ -154,7 +180,13 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + struct saa7134_dev *dev = q->priv_data; + if (dev->ts_state == SAA7134_TS_STARTED) { + /* Stop TS transport */ + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + dev->ts_state = SAA7134_TS_STOPPED; + } saa7134_dma_free(q,buf); } @@ -182,7 +214,7 @@ int saa7134_ts_init_hw(struct saa7134_dev *dev) /* deactivate TS softreset */ saa_writeb(SAA7134_TS_SERIAL1, 0x00); /* TSSOP high active, TSVAL high active, TSLOCK ignored */ - saa_writeb(SAA7134_TS_PARALLEL, 0xec); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); saa_writeb(SAA7134_TS_PARALLEL_SERIAL, (TS_PACKET_SIZE-1)); saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff)); saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff)); diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 68c26898186..02bb6747a39 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -628,6 +628,9 @@ void saa7134_set_tvnorm_hw(struct saa7134_dev *dev) if (card_in(dev, dev->ctl_input).tv) saa7134_i2c_call_clients(dev, VIDIOC_S_STD, &dev->tvnorm->id); + /* Set the correct norm for the saa6752hs. This function + does nothing if there is no saa6752hs. */ + saa7134_i2c_call_saa6752(dev, VIDIOC_S_STD, &dev->tvnorm->id); } static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale) @@ -1330,6 +1333,8 @@ static int video_open(struct inode *inode, struct file *file) struct saa7134_fh *fh; enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; int radio = 0; + + lock_kernel(); list_for_each_entry(dev, &saa7134_devlist, devlist) { if (dev->video_dev && (dev->video_dev->minor == minor)) goto found; @@ -1342,6 +1347,7 @@ static int video_open(struct inode *inode, struct file *file) goto found; } } + unlock_kernel(); return -ENODEV; found: @@ -1350,8 +1356,10 @@ static int video_open(struct inode *inode, struct file *file) /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -1384,6 +1392,7 @@ static int video_open(struct inode *inode, struct file *file) /* switch to video/vbi mode */ video_mux(dev,dev->ctl_input); } + unlock_kernel(); return 0; } @@ -1790,18 +1799,25 @@ static int saa7134_querycap(struct file *file, void *priv, return 0; } -static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) +int saa7134_s_std_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, v4l2_std_id *id) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; unsigned long flags; unsigned int i; v4l2_std_id fixup; int err; - err = v4l2_prio_check(&dev->prio, &fh->prio); - if (0 != err) - return err; + /* When called from the empress code fh == NULL. + That needs to be fixed somehow, but for now this is + good enough. */ + if (fh) { + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; + } else if (res_locked(dev, RESOURCE_OVERLAY)) { + /* Don't change the std from the mpeg device + if overlay is active. */ + return -EBUSY; + } for (i = 0; i < TVNORMS; i++) if (*id == tvnorms[i].id) @@ -1834,7 +1850,7 @@ static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) *id = tvnorms[i].id; mutex_lock(&dev->lock); - if (res_check(fh, RESOURCE_OVERLAY)) { + if (fh && res_check(fh, RESOURCE_OVERLAY)) { spin_lock_irqsave(&dev->slock, flags); stop_preview(dev, fh); spin_unlock_irqrestore(&dev->slock, flags); @@ -1851,6 +1867,23 @@ static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) mutex_unlock(&dev->lock); return 0; } +EXPORT_SYMBOL_GPL(saa7134_s_std_internal); + +static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_fh *fh = priv; + + return saa7134_s_std_internal(fh->dev, fh, id); +} + +static int saa7134_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + *id = dev->tvnorm->id; + return 0; +} static int saa7134_cropcap(struct file *file, void *priv, struct v4l2_cropcap *cap) @@ -2077,18 +2110,6 @@ static int saa7134_enum_fmt_vid_overlay(struct file *file, void *priv, return 0; } -static int saa7134_enum_fmt_vbi_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (0 != f->index) - return -EINVAL; - - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - - return 0; -} - static int saa7134_g_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { @@ -2379,7 +2400,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_g_fmt_vid_overlay = saa7134_g_fmt_vid_overlay, .vidioc_try_fmt_vid_overlay = saa7134_try_fmt_vid_overlay, .vidioc_s_fmt_vid_overlay = saa7134_s_fmt_vid_overlay, - .vidioc_enum_fmt_vbi_cap = saa7134_enum_fmt_vbi_cap, .vidioc_g_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, .vidioc_try_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, .vidioc_s_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, @@ -2391,6 +2411,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_qbuf = saa7134_qbuf, .vidioc_dqbuf = saa7134_dqbuf, .vidioc_s_std = saa7134_s_std, + .vidioc_g_std = saa7134_g_std, .vidioc_enum_input = saa7134_enum_input, .vidioc_g_input = saa7134_g_input, .vidioc_s_input = saa7134_s_input, diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index a0884f639f6..24096d6e1ef 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -269,6 +269,12 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_M6_EXTRA 144 #define SAA7134_BOARD_AVERMEDIA_M103 145 #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 +#define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 +#define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 +#define SAA7134_BOARD_AVERMEDIA_M135A 149 +#define SAA7134_BOARD_REAL_ANGEL_220 150 +#define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 +#define SAA7134_BOARD_ASUSTeK_TIGER 152 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 @@ -462,6 +468,12 @@ struct saa7134_mpeg_ops { void (*signal_change)(struct saa7134_dev *dev); }; +enum saa7134_ts_status { + SAA7134_TS_STOPPED, + SAA7134_TS_BUFF_DONE, + SAA7134_TS_STARTED, +}; + /* global device status */ struct saa7134_dev { struct list_head devlist; @@ -555,6 +567,8 @@ struct saa7134_dev { /* SAA7134_MPEG_* */ struct saa7134_ts ts; struct saa7134_dmaqueue ts_q; + enum saa7134_ts_status ts_state; + unsigned int buff_cnt; struct saa7134_mpeg_ops *mops; struct i2c_client *mpeg_i2c_client; @@ -567,7 +581,7 @@ struct saa7134_dev { #if defined(CONFIG_VIDEO_SAA7134_DVB) || defined(CONFIG_VIDEO_SAA7134_DVB_MODULE) /* SAA7134_MPEG_DVB only */ - struct videobuf_dvb dvb; + struct videobuf_dvb_frontends frontends; int (*original_demod_sleep)(struct dvb_frontend *fe); int (*original_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); int (*original_set_high_voltage)(struct dvb_frontend *fe, long arg); @@ -644,7 +658,7 @@ extern struct pci_device_id __devinitdata saa7134_pci_tbl[]; extern int saa7134_board_init1(struct saa7134_dev *dev); extern int saa7134_board_init2(struct saa7134_dev *dev); -int saa7134_tuner_callback(void *priv, int command, int arg); +int saa7134_tuner_callback(void *priv, int component, int command, int arg); /* ----------------------------------------------------------- */ @@ -654,6 +668,8 @@ int saa7134_i2c_register(struct saa7134_dev *dev); int saa7134_i2c_unregister(struct saa7134_dev *dev); void saa7134_i2c_call_clients(struct saa7134_dev *dev, unsigned int cmd, void *arg); +int saa7134_i2c_call_saa6752(struct saa7134_dev *dev, + unsigned int cmd, void *arg); /* ----------------------------------------------------------- */ @@ -666,6 +682,7 @@ extern struct video_device saa7134_radio_template; int saa7134_s_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c); int saa7134_g_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c); int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c); +int saa7134_s_std_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, v4l2_std_id *id); int saa7134_videoport_init(struct saa7134_dev *dev); void saa7134_set_tvnorm_hw(struct saa7134_dev *dev); diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 02fda4eecea..6debb65152e 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -25,43 +25,25 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7185 video encoder driver"); MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct saa7185 { @@ -75,32 +57,24 @@ struct saa7185 { int sat; }; -#define I2C_SAA7185 0x88 - /* ----------------------------------------------------------------------- */ -static inline int -saa7185_read (struct i2c_client *client) +static inline int saa7185_read(struct i2c_client *client) { return i2c_smbus_read_byte(client); } -static int -saa7185_write (struct i2c_client *client, - u8 reg, - u8 value) +static int saa7185_write(struct i2c_client *client, u8 reg, u8 value) { struct saa7185 *encoder = i2c_get_clientdata(client); - dprintk(1, KERN_DEBUG "SAA7185: %02x set to %02x\n", reg, value); + v4l_dbg(1, debug, client, "%02x set to %02x\n", reg, value); encoder->reg[reg] = value; return i2c_smbus_write_byte_data(client, reg, value); } -static int -saa7185_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7185_write_block(struct i2c_client *client, + const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -121,18 +95,17 @@ saa7185_write_block (struct i2c_client *client, encoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = saa7185_write(client, reg, - *data++)) < 0) + ret = saa7185_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -240,15 +213,11 @@ static const unsigned char init_ntsc[] = { 0x66, 0x21, /* FSC3 */ }; -static int -saa7185_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int saa7185_command(struct i2c_client *client, unsigned cmd, void *arg) { struct saa7185 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: saa7185_write_block(client, init_common, sizeof(init_common)); @@ -264,7 +233,6 @@ saa7185_command (struct i2c_client *client, sizeof(init_pal)); break; } - break; case ENCODER_GET_CAPABILITIES: @@ -276,8 +244,8 @@ saa7185_command (struct i2c_client *client, VIDEO_ENCODER_SECAM | VIDEO_ENCODER_CCIR; cap->inputs = 1; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { @@ -286,7 +254,6 @@ saa7185_command (struct i2c_client *client, //saa7185_write_block(client, init_common, sizeof(init_common)); switch (*iarg) { - case VIDEO_MODE_NTSC: saa7185_write_block(client, init_ntsc, sizeof(init_ntsc)); @@ -300,11 +267,10 @@ saa7185_command (struct i2c_client *client, case VIDEO_MODE_SECAM: default: return -EINVAL; - } encoder->norm = *iarg; - } break; + } case ENCODER_SET_INPUT: { @@ -314,7 +280,6 @@ saa7185_command (struct i2c_client *client, *iarg = 1: input is from ZR36060 */ switch (*iarg) { - case 0: /* Switch RTCE to 1 */ saa7185_write(client, 0x61, @@ -332,21 +297,19 @@ saa7185_command (struct i2c_client *client, default: return -EINVAL; - } - } break; + } case ENCODER_SET_OUTPUT: { int *iarg = arg; /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case ENCODER_ENABLE_OUTPUT: { @@ -356,8 +319,8 @@ saa7185_command (struct i2c_client *client, saa7185_write(client, 0x61, (encoder->reg[0x61] & 0xbf) | (encoder->enable ? 0x00 : 0x40)); - } break; + } default: return -EINVAL; @@ -368,138 +331,65 @@ saa7185_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { I2C_SAA7185 >> 1, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; +I2C_CLIENT_INSMOD; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver i2c_driver_saa7185; - -static int -saa7185_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7185_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; - struct i2c_client *client; struct saa7185 *encoder; - dprintk(1, - KERN_INFO - "saa7185.c: detecting saa7185 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7185; - strlcpy(I2C_NAME(client), "saa7185", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_NTSC; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - i = saa7185_write_block(client, init_common, sizeof(init_common)); - if (i >= 0) { - i = saa7185_write_block(client, init_ntsc, - sizeof(init_ntsc)); - } - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init error %d\n", - I2C_NAME(client), i); - } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version %d at address 0x%x\n", - I2C_NAME(client), saa7185_read(client) >> 5, - client->addr << 1); - } - + if (i >= 0) + i = saa7185_write_block(client, init_ntsc, sizeof(init_ntsc)); + if (i < 0) + v4l_dbg(1, debug, client, "init error %d\n", i); + else + v4l_dbg(1, debug, client, "revision 0x%x\n", + saa7185_read(client) >> 5); return 0; } -static int -saa7185_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "saa7185.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7185_detect_client); -} - -static int -saa7185_detach_client (struct i2c_client *client) +static int saa7185_remove(struct i2c_client *client) { struct saa7185 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } saa7185_write(client, 0x61, (encoder->reg[0x61]) | 0x40); /* SW: output off is active */ //saa7185_write(client, 0x3a, (encoder->reg[0x3a]) | 0x80); /* SW: color bar */ kfree(encoder); - kfree(client); - return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7185 = { - .driver = { - .name = "saa7185", /* name */ - }, - - .id = I2C_DRIVERID_SAA7185B, +static const struct i2c_device_id saa7185_id[] = { + { "saa7185", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7185_id); - .attach_adapter = saa7185_attach_adapter, - .detach_client = saa7185_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7185", + .driverid = I2C_DRIVERID_SAA7185B, .command = saa7185_command, + .probe = saa7185_probe, + .remove = saa7185_remove, + .id_table = saa7185_id, }; - -static int __init -saa7185_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7185); -} - -static void __exit -saa7185_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7185); -} - -module_init(saa7185_init); -module_exit(saa7185_exit); diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index acceed5d04a..ae3949180c4 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -288,7 +288,7 @@ static void se401_button_irq(struct urb *urb) int status; if (!se401->dev) { - info("ohoh: device vapourished"); + dev_info(&urb->dev->dev, "device vapourished\n"); return; } @@ -328,7 +328,7 @@ static void se401_video_irq(struct urb *urb) return; if (!se401->dev) { - info ("ohoh: device vapourished"); + dev_info(&urb->dev->dev, "device vapourished\n"); return; } @@ -375,7 +375,7 @@ static void se401_video_irq(struct urb *urb) urb->status=0; urb->dev=se401->dev; if(usb_submit_urb(urb, GFP_KERNEL)) - info("urb burned down"); + dev_info(&urb->dev->dev, "urb burned down\n"); return; } @@ -860,7 +860,8 @@ static int se401_newframe(struct usb_se401 *se401, int framenr) ); if (se401->nullpackets > SE401_MAX_NULLPACKETS) { se401->nullpackets=0; - info("to many null length packets, restarting capture"); + dev_info(&se401->dev->dev, + "too many null length packets, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } else { @@ -880,7 +881,8 @@ static int se401_newframe(struct usb_se401 *se401, int framenr) se401->scratch_use=0; if (errors > SE401_MAX_ERRORS) { errors=0; - info("to much errors, restarting capture"); + dev_info(&se401->dev->dev, + "too many errors, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } @@ -913,7 +915,7 @@ static void usb_se401_remove_disconnected (struct usb_se401 *se401) usb_kill_urb(se401->inturb); usb_free_urb(se401->inturb); } - info("%s disconnected", se401->camera_name); + dev_info(&se401->dev->dev, "%s disconnected", se401->camera_name); /* Free the memory */ kfree(se401->width); @@ -936,14 +938,18 @@ static int se401_open(struct inode *inode, struct file *file) struct usb_se401 *se401 = (struct usb_se401 *)dev; int err = 0; - if (se401->user) + lock_kernel(); + if (se401->user) { + unlock_kernel(); return -EBUSY; + } se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES); if (se401->fbuf) file->private_data = dev; else err = -ENOMEM; se401->user = !err; + unlock_kernel(); return err; } @@ -956,8 +962,8 @@ static int se401_close(struct inode *inode, struct file *file) rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES); if (se401->removed) { + dev_info(&se401->dev->dev, "device unregistered\n"); usb_se401_remove_disconnected(se401); - info("device unregistered"); } else { for (i=0; i<SE401_NUMFRAMES; i++) se401->frame[i].grabstate=FRAME_UNUSED; @@ -1232,6 +1238,7 @@ static const struct file_operations se401_fops = { static struct video_device se401_template = { .name = "se401 USB camera", .fops = &se401_fops, + .release = video_device_release_empty, }; @@ -1271,7 +1278,7 @@ static int se401_init(struct usb_se401 *se401, int button) for (i=0; i<se401->sizes; i++) { sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]); } - info("%s", temp); + dev_info(&se401->dev->dev, "%s\n", temp); se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3; rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); @@ -1305,7 +1312,8 @@ static int se401_init(struct usb_se401 *se401, int button) if (button) { se401->inturb=usb_alloc_urb(0, GFP_KERNEL); if (!se401->inturb) { - info("Allocation of inturb failed"); + dev_info(&se401->dev->dev, + "Allocation of inturb failed\n"); return 1; } usb_fill_int_urb(se401->inturb, se401->dev, @@ -1316,7 +1324,7 @@ static int se401_init(struct usb_se401 *se401, int button) 8 ); if (usb_submit_urb(se401->inturb, GFP_KERNEL)) { - info("int urb burned down"); + dev_info(&se401->dev->dev, "int urb burned down\n"); return 1; } } else @@ -1373,7 +1381,7 @@ static int se401_probe(struct usb_interface *intf, return -ENODEV; /* We found one */ - info("SE401 camera found: %s", camera_name); + dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name); if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) { err("couldn't kmalloc se401 struct"); @@ -1384,7 +1392,8 @@ static int se401_probe(struct usb_interface *intf, se401->iface = interface->bInterfaceNumber; se401->camera_name = camera_name; - info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255); + dev_info(&intf->dev, "firmware version: %02x\n", + le16_to_cpu(dev->descriptor.bcdDevice) & 255); if (se401_init(se401, button)) { kfree(se401); @@ -1402,7 +1411,8 @@ static int se401_probe(struct usb_interface *intf, err("video_register_device failed"); return -EIO; } - info("registered new video device: video%d", se401->vdev.minor); + dev_info(&intf->dev, "registered new video device: video%d\n", + se401->vdev.minor); usb_set_intfdata (intf, se401); return 0; @@ -1446,10 +1456,10 @@ static struct usb_driver se401_driver = { static int __init usb_se401_init(void) { - info("SE401 usb camera driver version %s registering", version); + printk(KERN_INFO "SE401 usb camera driver version %s registering\n", version); if (flickerless) if (flickerless!=50 && flickerless!=60) { - info("Invallid flickerless value, use 0, 50 or 60."); + printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n"); return -1; } return usb_register(&se401_driver); @@ -1458,7 +1468,7 @@ static int __init usb_se401_init(void) static void __exit usb_se401_exit(void) { usb_deregister(&se401_driver); - info("SE401 driver deregistered"); + printk(KERN_INFO "SE401 driver deregistered\frame"); } module_init(usb_se401_init); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 318754e7313..2407607f2ef 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -40,39 +40,39 @@ /* register offsets for sh7722 / sh7723 */ -#define CAPSR 0x00 -#define CAPCR 0x04 -#define CAMCR 0x08 -#define CMCYR 0x0c -#define CAMOR 0x10 -#define CAPWR 0x14 -#define CAIFR 0x18 -#define CSTCR 0x20 /* not on sh7723 */ -#define CSECR 0x24 /* not on sh7723 */ -#define CRCNTR 0x28 -#define CRCMPR 0x2c -#define CFLCR 0x30 -#define CFSZR 0x34 -#define CDWDR 0x38 -#define CDAYR 0x3c -#define CDACR 0x40 -#define CDBYR 0x44 -#define CDBCR 0x48 -#define CBDSR 0x4c -#define CFWCR 0x5c -#define CLFCR 0x60 -#define CDOCR 0x64 -#define CDDCR 0x68 -#define CDDAR 0x6c -#define CEIER 0x70 -#define CETCR 0x74 -#define CSTSR 0x7c -#define CSRTR 0x80 -#define CDSSR 0x84 -#define CDAYR2 0x90 -#define CDACR2 0x94 -#define CDBYR2 0x98 -#define CDBCR2 0x9c +#define CAPSR 0x00 /* Capture start register */ +#define CAPCR 0x04 /* Capture control register */ +#define CAMCR 0x08 /* Capture interface control register */ +#define CMCYR 0x0c /* Capture interface cycle register */ +#define CAMOR 0x10 /* Capture interface offset register */ +#define CAPWR 0x14 /* Capture interface width register */ +#define CAIFR 0x18 /* Capture interface input format register */ +#define CSTCR 0x20 /* Camera strobe control register (<= sh7722) */ +#define CSECR 0x24 /* Camera strobe emission count register (<= sh7722) */ +#define CRCNTR 0x28 /* CEU register control register */ +#define CRCMPR 0x2c /* CEU register forcible control register */ +#define CFLCR 0x30 /* Capture filter control register */ +#define CFSZR 0x34 /* Capture filter size clip register */ +#define CDWDR 0x38 /* Capture destination width register */ +#define CDAYR 0x3c /* Capture data address Y register */ +#define CDACR 0x40 /* Capture data address C register */ +#define CDBYR 0x44 /* Capture data bottom-field address Y register */ +#define CDBCR 0x48 /* Capture data bottom-field address C register */ +#define CBDSR 0x4c /* Capture bundle destination size register */ +#define CFWCR 0x5c /* Firewall operation control register */ +#define CLFCR 0x60 /* Capture low-pass filter control register */ +#define CDOCR 0x64 /* Capture data output control register */ +#define CDDCR 0x68 /* Capture data complexity level register */ +#define CDDAR 0x6c /* Capture data complexity level address register */ +#define CEIER 0x70 /* Capture event interrupt enable register */ +#define CETCR 0x74 /* Capture event flag clear register */ +#define CSTSR 0x7c /* Capture status register */ +#define CSRTR 0x80 /* Capture software reset register */ +#define CDSSR 0x84 /* Capture data size register */ +#define CDAYR2 0x90 /* Capture data address Y register 2 */ +#define CDACR2 0x94 /* Capture data address C register 2 */ +#define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */ +#define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */ static DEFINE_MUTEX(camera_lock); @@ -165,6 +165,7 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) ceu_write(pcdev, CETCR, 0x0317f313 ^ 0x10); if (pcdev->active) { + pcdev->active->state = VIDEOBUF_ACTIVE; ceu_write(pcdev, CDAYR, videobuf_to_dma_contig(pcdev->active)); ceu_write(pcdev, CAPSR, 0x1); /* start capture */ } @@ -236,7 +237,7 @@ static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq, dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, vb, vb->baddr, vb->bsize); - vb->state = VIDEOBUF_ACTIVE; + vb->state = VIDEOBUF_QUEUED; spin_lock_irqsave(&pcdev->lock, flags); list_add_tail(&vb->queue, &pcdev->capture); @@ -304,9 +305,6 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) "SuperH Mobile CEU driver attached to camera %d\n", icd->devnum); - if (pcdev->pdata->enable_camera) - pcdev->pdata->enable_camera(); - ret = icd->ops->init(icd); if (ret) goto err; @@ -326,15 +324,25 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; + unsigned long flags; BUG_ON(icd != pcdev->icd); /* disable capture, disable interrupts */ ceu_write(pcdev, CEIER, 0); ceu_write(pcdev, CAPSR, 1 << 16); /* reset */ + + /* make sure active buffer is canceled */ + spin_lock_irqsave(&pcdev->lock, flags); + if (pcdev->active) { + list_del(&pcdev->active->queue); + pcdev->active->state = VIDEOBUF_ERROR; + wake_up_all(&pcdev->active->done); + pcdev->active = NULL; + } + spin_unlock_irqrestore(&pcdev->lock, flags); + icd->ops->release(icd); - if (pcdev->pdata->disable_camera) - pcdev->pdata->disable_camera(); dev_info(&icd->dev, "SuperH Mobile CEU driver detached from camera %d\n", @@ -396,7 +404,20 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, ceu_write(pcdev, CFLCR, 0); /* data fetch mode - no scaling */ ceu_write(pcdev, CFSZR, (icd->height << 16) | cfszr_width); ceu_write(pcdev, CLFCR, 0); /* data fetch mode - no lowpass filter */ - ceu_write(pcdev, CDOCR, 0x00000016); + + /* A few words about byte order (observed in Big Endian mode) + * + * In data fetch mode bytes are received in chunks of 8 bytes. + * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first) + * + * The data is however by default written to memory in reverse order: + * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte) + * + * The lowest three bits of CDOCR allows us to do swapping, + * using 7 we swap the data bytes to match the incoming order: + * D0, D1, D2, D3, D4, D5, D6, D7 + */ + ceu_write(pcdev, CDOCR, 0x00000017); ceu_write(pcdev, CDWDR, cdwdr_width); ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 2da6938718f..20e30bd9364 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -116,6 +116,26 @@ MODULE_PARM_DESC(debug, "\n"); #endif +/* + Add the probe entries to this table. Be sure to add the entry in the right + place, since, on failure, the next probing routine is called according to + the order of the list below, from top to bottom. +*/ +static int (*sn9c102_sensor_table[])(struct sn9c102_device *) = { + &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ + &sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */ + &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ + &sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */ + &sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */ + &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ + &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ + &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */ + &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */ + &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ + &sn9c102_probe_tas5110d, /* detection based on USB pid/vid */ + &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ +}; + /*****************************************************************************/ static u32 @@ -1746,7 +1766,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp) if (!down_read_trylock(&sn9c102_dev_lock)) return -ERESTARTSYS; - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); if (wait_for_completion_interruptible(&cam->probe)) { up_read(&sn9c102_dev_lock); @@ -1843,7 +1863,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) down_write(&sn9c102_dev_lock); - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); sn9c102_stop_transfer(cam); sn9c102_release_buffers(cam); @@ -1863,7 +1883,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) static ssize_t sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); struct sn9c102_frame_t* f, * i; unsigned long lock_flags; long timeout; @@ -1987,7 +2007,7 @@ exit: static unsigned int sn9c102_poll(struct file *filp, poll_table *wait) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); struct sn9c102_frame_t* f; unsigned long lock_flags; unsigned int mask = 0; @@ -2063,7 +2083,7 @@ static struct vm_operations_struct sn9c102_vm_ops = { static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; void *pos; @@ -3075,7 +3095,7 @@ sn9c102_vidioc_s_audio(struct sn9c102_device* cam, void __user * arg) static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, unsigned int cmd, void __user * arg) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); switch (cmd) { @@ -3179,7 +3199,7 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, static int sn9c102_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); int err = 0; if (mutex_lock_interruptible(&cam->fileop_mutex)) diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 90a401dc388..e23734f6d6e 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -140,24 +140,4 @@ extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); extern int sn9c102_probe_tas5110d(struct sn9c102_device* cam); extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam); -/* - Add the above entries to this table. Be sure to add the entry in the right - place, since, on failure, the next probing routine is called according to - the order of the list below, from top to bottom. -*/ -static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { - &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ - &sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */ - &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ - &sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */ - &sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */ - &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ - &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ - &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */ - &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */ - &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ - &sn9c102_probe_tas5110d, /* detection based on USB pid/vid */ - &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ -}; - #endif /* _SN9C102_DEVTABLE_H_ */ diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c index eaf9ad0dc8a..db243494893 100644 --- a/drivers/media/video/sn9c102/sn9c102_hv7131d.c +++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int hv7131d_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131r.c b/drivers/media/video/sn9c102/sn9c102_hv7131r.c index 0fc401223cf..4295887ff60 100644 --- a/drivers/media/video/sn9c102/sn9c102_hv7131r.c +++ b/drivers/media/video/sn9c102/sn9c102_hv7131r.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int hv7131r_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c index 00b134ca0a3..1f5b09bec89 100644 --- a/drivers/media/video/sn9c102/sn9c102_mi0343.c +++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int mi0343_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_mi0360.c b/drivers/media/video/sn9c102/sn9c102_mi0360.c index f8d81d82e8d..d973fc1973d 100644 --- a/drivers/media/video/sn9c102/sn9c102_mi0360.c +++ b/drivers/media/video/sn9c102/sn9c102_mi0360.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int mi0360_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_mt9v111.c b/drivers/media/video/sn9c102/sn9c102_mt9v111.c index 3b98ac3bbc3..95986eb492e 100644 --- a/drivers/media/video/sn9c102/sn9c102_mt9v111.c +++ b/drivers/media/video/sn9c102/sn9c102_mt9v111.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int mt9v111_init(struct sn9c102_device *cam) diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c index e4856fd7798..803712c29f0 100644 --- a/drivers/media/video/sn9c102/sn9c102_ov7630.c +++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int ov7630_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_ov7660.c b/drivers/media/video/sn9c102/sn9c102_ov7660.c index 8aae416ba8e..7977795d342 100644 --- a/drivers/media/video/sn9c102/sn9c102_ov7660.c +++ b/drivers/media/video/sn9c102/sn9c102_ov7660.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int ov7660_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c index 360f2a848bc..81cd969c1b7 100644 --- a/drivers/media/video/sn9c102/sn9c102_pas106b.c +++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int pas106b_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c index ca4a1506ed3..2782f94cf6f 100644 --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int pas202bcb_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c index e7d2de2bace..04cdfdde856 100644 --- a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c +++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int tas5110c1b_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110d.c b/drivers/media/video/sn9c102/sn9c102_tas5110d.c index d32fdbccdc5..9372e6f9fcf 100644 --- a/drivers/media/video/sn9c102/sn9c102_tas5110d.c +++ b/drivers/media/video/sn9c102/sn9c102_tas5110d.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int tas5110d_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c index 56fb1d575a8..a30bbc4389f 100644 --- a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c +++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int tas5130d1b_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index 1adc257ebdb..bb7a9d480e8 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -18,15 +18,7 @@ #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <media/soc_camera.h> - -struct soc_camera_platform_info { - int iface; - char *format_name; - unsigned long format_depth; - struct v4l2_pix_format format; - unsigned long bus_param; - int (*set_capture)(struct soc_camera_platform_info *info, int enable); -}; +#include <media/soc_camera_platform.h> struct soc_camera_platform_priv { struct soc_camera_platform_info *info; @@ -44,11 +36,21 @@ soc_camera_platform_get_info(struct soc_camera_device *icd) static int soc_camera_platform_init(struct soc_camera_device *icd) { + struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd); + + if (p->power) + p->power(1); + return 0; } static int soc_camera_platform_release(struct soc_camera_device *icd) { + struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd); + + if (p->power) + p->power(0); + return 0; } diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index ad36af30e09..edaea496451 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> -#include <linux/kref.h> #include <linux/usb.h> #include <linux/mm.h> @@ -65,22 +64,6 @@ static struct usb_device_id stkwebcam_table[] = { }; MODULE_DEVICE_TABLE(usb, stkwebcam_table); -static void stk_camera_cleanup(struct kref *kref) -{ - struct stk_camera *dev = to_stk_camera(kref); - - STK_INFO("Syntek USB2.0 Camera release resources" - " video device /dev/video%d\n", dev->vdev.minor); - video_unregister_device(&dev->vdev); - dev->vdev.priv = NULL; - - if (dev->sio_bufs != NULL || dev->isobufs != NULL) - STK_ERROR("We are leaking memory\n"); - usb_put_intf(dev->interface); - kfree(dev); -} - - /* * Basic stuff */ @@ -576,7 +559,7 @@ static void stk_clean_iso(struct stk_camera *dev) urb = dev->isobufs[i].urb; if (urb) { - if (atomic_read(&dev->urbs_used)) + if (atomic_read(&dev->urbs_used) && is_present(dev)) usb_kill_urb(urb); usb_free_urb(urb); } @@ -689,45 +672,30 @@ static int v4l_stk_open(struct inode *inode, struct file *fp) vdev = video_devdata(fp); dev = vdev_to_camera(vdev); - if (dev == NULL || !is_present(dev)) + lock_kernel(); + if (dev == NULL || !is_present(dev)) { + unlock_kernel(); return -ENXIO; - fp->private_data = vdev; - kref_get(&dev->kref); + } + fp->private_data = dev; usb_autopm_get_interface(dev->interface); + unlock_kernel(); return 0; } static int v4l_stk_release(struct inode *inode, struct file *fp) { - struct stk_camera *dev; - struct video_device *vdev; + struct stk_camera *dev = fp->private_data; - vdev = video_devdata(fp); - if (vdev == NULL) { - STK_ERROR("v4l_release called w/o video devdata\n"); - return -EFAULT; - } - dev = vdev_to_camera(vdev); - if (dev == NULL) { - STK_ERROR("v4l_release called on removed device\n"); - return -ENODEV; + if (dev->owner == fp) { + stk_stop_stream(dev); + stk_free_buffers(dev); + dev->owner = NULL; } - if (dev->owner != fp) { + if(is_present(dev)) usb_autopm_put_interface(dev->interface); - kref_put(&dev->kref, stk_camera_cleanup); - return 0; - } - - stk_stop_stream(dev); - - stk_free_buffers(dev); - - dev->owner = NULL; - - usb_autopm_put_interface(dev->interface); - kref_put(&dev->kref, stk_camera_cleanup); return 0; } @@ -738,17 +706,8 @@ static ssize_t v4l_stk_read(struct file *fp, char __user *buf, int i; int ret; unsigned long flags; - struct stk_camera *dev; - struct video_device *vdev; struct stk_sio_buffer *sbuf; - - vdev = video_devdata(fp); - if (vdev == NULL) - return -EFAULT; - dev = vdev_to_camera(vdev); - - if (dev == NULL) - return -EIO; + struct stk_camera *dev = fp->private_data; if (!is_present(dev)) return -EIO; @@ -804,17 +763,7 @@ static ssize_t v4l_stk_read(struct file *fp, char __user *buf, static unsigned int v4l_stk_poll(struct file *fp, poll_table *wait) { - struct stk_camera *dev; - struct video_device *vdev; - - vdev = video_devdata(fp); - - if (vdev == NULL) - return -EFAULT; - - dev = vdev_to_camera(vdev); - if (dev == NULL) - return -ENODEV; + struct stk_camera *dev = fp->private_data; poll_wait(fp, &dev->wait_frame, wait); @@ -850,16 +799,12 @@ static int v4l_stk_mmap(struct file *fp, struct vm_area_struct *vma) unsigned int i; int ret; unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - struct stk_camera *dev; - struct video_device *vdev; + struct stk_camera *dev = fp->private_data; struct stk_sio_buffer *sbuf = NULL; if (!(vma->vm_flags & VM_WRITE) || !(vma->vm_flags & VM_SHARED)) return -EINVAL; - vdev = video_devdata(fp); - dev = vdev_to_camera(vdev); - for (i = 0; i < dev->n_sbufs; i++) { if (dev->sio_bufs[i].v4lbuf.m.offset == offset) { sbuf = dev->sio_bufs + i; @@ -1355,6 +1300,12 @@ static const struct v4l2_ioctl_ops v4l_stk_ioctl_ops = { static void stk_v4l_dev_release(struct video_device *vd) { + struct stk_camera *dev = vdev_to_camera(vd); + + if (dev->sio_bufs != NULL || dev->isobufs != NULL) + STK_ERROR("We are leaking memory\n"); + usb_put_intf(dev->interface); + kfree(dev); } static struct video_device stk_v4l_data = { @@ -1375,7 +1326,6 @@ static int stk_register_video_device(struct stk_camera *dev) dev->vdev = stk_v4l_data; dev->vdev.debug = debug; dev->vdev.parent = &dev->interface->dev; - dev->vdev.priv = dev; err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); if (err) STK_ERROR("v4l registration failed\n"); @@ -1392,7 +1342,7 @@ static int stk_camera_probe(struct usb_interface *interface, const struct usb_device_id *id) { int i; - int err; + int err = 0; struct stk_camera *dev = NULL; struct usb_device *udev = interface_to_usbdev(interface); @@ -1405,7 +1355,6 @@ static int stk_camera_probe(struct usb_interface *interface, return -ENOMEM; } - kref_init(&dev->kref); spin_lock_init(&dev->spinlock); init_waitqueue_head(&dev->wait_frame); @@ -1438,8 +1387,8 @@ static int stk_camera_probe(struct usb_interface *interface, } if (!dev->isoc_ep) { STK_ERROR("Could not find isoc-in endpoint"); - kref_put(&dev->kref, stk_camera_cleanup); - return -ENODEV; + err = -ENODEV; + goto error; } dev->vsettings.brightness = 0x7fff; dev->vsettings.palette = V4L2_PIX_FMT_RGB565; @@ -1453,14 +1402,17 @@ static int stk_camera_probe(struct usb_interface *interface, err = stk_register_video_device(dev); if (err) { - kref_put(&dev->kref, stk_camera_cleanup); - return err; + goto error; } stk_create_sysfs_files(&dev->vdev); usb_autopm_enable(dev->interface); return 0; + +error: + kfree(dev); + return err; } static void stk_camera_disconnect(struct usb_interface *interface) @@ -1473,7 +1425,10 @@ static void stk_camera_disconnect(struct usb_interface *interface) wake_up_interruptible(&dev->wait_frame); stk_remove_sysfs_files(&dev->vdev); - kref_put(&dev->kref, stk_camera_cleanup); + STK_INFO("Syntek USB2.0 Camera release resources " + "video device /dev/video%d\n", dev->vdev.minor); + + video_unregister_device(&dev->vdev); } #ifdef CONFIG_PM diff --git a/drivers/media/video/stk-webcam.h b/drivers/media/video/stk-webcam.h index df4dfefc532..9f673663757 100644 --- a/drivers/media/video/stk-webcam.h +++ b/drivers/media/video/stk-webcam.h @@ -99,7 +99,6 @@ struct stk_camera { u8 isoc_ep; - struct kref kref; /* Not sure if this is right */ atomic_t urbs_used; @@ -121,10 +120,8 @@ struct stk_camera { unsigned sequence; }; -#define to_stk_camera(d) container_of(d, struct stk_camera, kref) #define vdev_to_camera(d) container_of(d, struct stk_camera, vdev) -void stk_camera_delete(struct kref *); int stk_camera_write_reg(struct stk_camera *, u16, u8); int stk_camera_read_reg(struct stk_camera *, u16, int *); diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index 276bded06ab..bbad54f85c8 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -1882,12 +1882,16 @@ static int saa_open(struct inode *inode, struct file *file) struct video_device *vdev = video_devdata(file); struct saa7146 *saa = container_of(vdev, struct saa7146, video_dev); + lock_kernel(); file->private_data = saa; saa->user++; - if (saa->user > 1) + if (saa->user > 1) { + unlock_kernel(); return 0; /* device open already, don't reset */ + } saa->writemode = VID_WRITE_MPEG_VID; /* default to video */ + unlock_kernel(); return 0; } @@ -1921,6 +1925,7 @@ static struct video_device saa_template = { .name = "SAA7146A", .fops = &saa_fops, .minor = -1, + .release = video_device_release_empty, }; static int __devinit configure_saa7146(struct pci_dev *pdev, int num) diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index dce94743945..9c549d93599 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -84,7 +84,8 @@ static unsigned int debug; #define PDEBUG(level, fmt, args...) \ do { \ if (debug >= level) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME " [%s:%d] \n" fmt, \ + __func__, __LINE__ , ## args); \ } while (0) @@ -1086,6 +1087,7 @@ static int stv_open (struct inode *inode, struct file *file) int err = 0; /* we are called with the BKL held */ + lock_kernel(); stv680->user = 1; err = stv_init (stv680); /* main initialization routine for camera */ @@ -1099,6 +1101,7 @@ static int stv_open (struct inode *inode, struct file *file) } if (err) stv680->user = 0; + unlock_kernel(); return err; } @@ -1550,7 +1553,8 @@ static int __init usb_stv680_init (void) } PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); - info(DRIVER_DESC " " DRIVER_VERSION); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return 0; } diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index 2437c1a269c..1c391f0328f 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -2,6 +2,7 @@ tda9840 - i2c-driver for the tda9840 by SGS Thomson Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> The tda9840 is a stereo/dual sound processor with digital identification. It can be found at address 0x84 on the i2c-bus. @@ -28,59 +29,118 @@ #include <linux/module.h> #include <linux/ioctl.h> #include <linux/i2c.h> - +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> #include "tda9840.h" -static int debug; /* insmod parameter */ +MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); +MODULE_DESCRIPTION("tda9840 driver"); +MODULE_LICENSE("GPL"); + +static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); -#define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) +MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define SWITCH 0x00 #define LEVEL_ADJUST 0x02 #define STEREO_ADJUST 0x03 #define TEST 0x04 +#define TDA9840_SET_MUTE 0x00 +#define TDA9840_SET_MONO 0x10 +#define TDA9840_SET_STEREO 0x2a +#define TDA9840_SET_LANG1 0x12 +#define TDA9840_SET_LANG2 0x1e +#define TDA9840_SET_BOTH 0x1a +#define TDA9840_SET_BOTH_R 0x16 +#define TDA9840_SET_EXTERNAL 0x7a + /* addresses to scan, found only at 0x42 (7-Bit) */ static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END }; /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; -static struct i2c_driver driver; -static struct i2c_client client_template; +static void tda9840_write(struct i2c_client *client, u8 reg, u8 val) +{ + if (i2c_smbus_write_byte_data(client, reg, val)) + v4l_dbg(1, debug, client, "error writing %02x to %02x\n", + val, reg); +} -static int command(struct i2c_client *client, unsigned int cmd, void *arg) +static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) { - int result; int byte = *(int *)arg; switch (cmd) { - case TDA9840_SWITCH: - - dprintk("TDA9840_SWITCH: 0x%02x\n", byte); - - if (byte != TDA9840_SET_MONO - && byte != TDA9840_SET_MUTE - && byte != TDA9840_SET_STEREO - && byte != TDA9840_SET_LANG1 - && byte != TDA9840_SET_LANG2 - && byte != TDA9840_SET_BOTH - && byte != TDA9840_SET_BOTH_R - && byte != TDA9840_SET_EXTERNAL) { + case VIDIOC_S_TUNER: { + struct v4l2_tuner *t = arg; + int byte; + + if (t->index) return -EINVAL; + + switch (t->audmode) { + case V4L2_TUNER_MODE_STEREO: + byte = TDA9840_SET_STEREO; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + byte = TDA9840_SET_BOTH; + break; + case V4L2_TUNER_MODE_LANG1: + byte = TDA9840_SET_LANG1; + break; + case V4L2_TUNER_MODE_LANG2: + byte = TDA9840_SET_LANG2; + break; + default: + byte = TDA9840_SET_MONO; + break; + } + v4l_dbg(1, debug, client, "TDA9840_SWITCH: 0x%02x\n", byte); + tda9840_write(client, SWITCH, byte); + break; + } + + case VIDIOC_G_TUNER: { + struct v4l2_tuner *t = arg; + u8 byte; + + t->rxsubchans = V4L2_TUNER_SUB_MONO; + if (1 != i2c_master_recv(client, &byte, 1)) { + v4l_dbg(1, debug, client, + "i2c_master_recv() failed\n"); + return -EIO; } - result = i2c_smbus_write_byte_data(client, SWITCH, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + if (byte & 0x80) { + v4l_dbg(1, debug, client, + "TDA9840_DETECT: register contents invalid\n"); + return -EINVAL; + } + + v4l_dbg(1, debug, client, "TDA9840_DETECT: byte: 0x%02x\n", byte); + + switch (byte & 0x60) { + case 0x00: + t->rxsubchans = V4L2_TUNER_SUB_MONO; + break; + case 0x20: + t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + case 0x40: + t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + break; + default: /* Incorrect detect */ + t->rxsubchans = V4L2_TUNER_MODE_MONO; + break; + } break; + } case TDA9840_LEVEL_ADJUST: - - dprintk("TDA9840_LEVEL_ADJUST: %d\n", byte); + v4l_dbg(1, debug, client, "TDA9840_LEVEL_ADJUST: %d\n", byte); /* check for correct range */ if (byte > 25 || byte < -20) @@ -92,15 +152,11 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) byte += 0x8; else byte = -byte; - - result = i2c_smbus_write_byte_data(client, LEVEL_ADJUST, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + tda9840_write(client, LEVEL_ADJUST, byte); break; case TDA9840_STEREO_ADJUST: - - dprintk("TDA9840_STEREO_ADJUST: %d\n", byte); + v4l_dbg(1, debug, client, "TDA9840_STEREO_ADJUST: %d\n", byte); /* check for correct range */ if (byte > 25 || byte < -24) @@ -113,143 +169,59 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) else byte = -byte; - result = i2c_smbus_write_byte_data(client, STEREO_ADJUST, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); - break; - - case TDA9840_DETECT: { - int *ret = (int *)arg; - - byte = i2c_smbus_read_byte_data(client, STEREO_ADJUST); - if (byte == -1) { - dprintk("i2c_smbus_read_byte_data() failed\n"); - return -EIO; - } - - if (0 != (byte & 0x80)) { - dprintk("TDA9840_DETECT: register contents invalid\n"); - return -EINVAL; - } - - dprintk("TDA9840_DETECT: byte: 0x%02x\n", byte); - *ret = ((byte & 0x60) >> 5); - result = 0; - break; - } - case TDA9840_TEST: - dprintk("TDA9840_TEST: 0x%02x\n", byte); - - /* mask out irrelevant bits */ - byte &= 0x3; - - result = i2c_smbus_write_byte_data(client, TEST, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + tda9840_write(client, STEREO_ADJUST, byte); break; default: return -ENOIOCTLCMD; } - if (result) - return -EIO; - return 0; } -static int detect(struct i2c_adapter *adapter, int address, int kind) +static int tda9840_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; - int result = 0; - - int byte = 0x0; + int result; + int byte; /* let's see whether this adapter can support what we need */ - if (0 == i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_READ_BYTE_DATA | - I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) return 0; - } - - /* allocate memory for client structure */ - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) { - printk("not enough kernel memory\n"); - return -ENOMEM; - } - - /* fill client structure */ - memcpy(client, &client_template, sizeof(struct i2c_client)); - client->addr = address; - client->adapter = adapter; - /* tell the i2c layer a new client has arrived */ - if (0 != (result = i2c_attach_client(client))) { - kfree(client); - return result; - } + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); /* set initial values for level & stereo - adjustment, mode */ byte = 0; - result = command(client, TDA9840_LEVEL_ADJUST, &byte); - result += command(client, TDA9840_STEREO_ADJUST, &byte); - byte = TDA9840_SET_MONO; - result = command(client, TDA9840_SWITCH, &byte); + result = tda9840_command(client, TDA9840_LEVEL_ADJUST, &byte); + result += tda9840_command(client, TDA9840_STEREO_ADJUST, &byte); + tda9840_write(client, SWITCH, TDA9840_SET_STEREO); if (result) { - dprintk("could not initialize tda9840\n"); + v4l_dbg(1, debug, client, "could not initialize tda9840\n"); return -ENODEV; } - - printk("tda9840: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]); return 0; } -static int attach(struct i2c_adapter *adapter) -{ - /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_HW_SAA7146) { - dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); - return -ENODEV; - } - - return i2c_probe(adapter, &addr_data, &detect); -} - -static int detach(struct i2c_client *client) +static int tda9840_legacy_probe(struct i2c_adapter *adapter) { - int ret = i2c_detach_client(client); - kfree(client); - return ret; + /* Let's see whether this is a known adapter we can attach to. + Prevents conflicts with tvaudio.c. */ + return adapter->id == I2C_HW_SAA7146; } - -static struct i2c_driver driver = { - .driver = { - .name = "tda9840", - }, - .id = I2C_DRIVERID_TDA9840, - .attach_adapter = attach, - .detach_client = detach, - .command = command, +static const struct i2c_device_id tda9840_id[] = { + { "tda9840", 0 }, + { } }; +MODULE_DEVICE_TABLE(i2c, tda9840_id); -static struct i2c_client client_template = { +static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tda9840", - .driver = &driver, + .driverid = I2C_DRIVERID_TDA9840, + .command = tda9840_command, + .probe = tda9840_probe, + .legacy_probe = tda9840_legacy_probe, + .id_table = tda9840_id, }; - -static int __init this_module_init(void) -{ - return i2c_add_driver(&driver); -} - -static void __exit this_module_exit(void) -{ - i2c_del_driver(&driver); -} - -module_init(this_module_init); -module_exit(this_module_exit); - -MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); -MODULE_DESCRIPTION("tda9840 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/tda9840.h b/drivers/media/video/tda9840.h index 7da8432cdca..dc12ae7caf6 100644 --- a/drivers/media/video/tda9840.h +++ b/drivers/media/video/tda9840.h @@ -3,24 +3,6 @@ #define I2C_ADDR_TDA9840 0x42 -#define TDA9840_DETECT _IOR('v',1,int) -/* return values for TDA9840_DETCT */ -#define TDA9840_MONO_DETECT 0x0 -#define TDA9840_DUAL_DETECT 0x1 -#define TDA9840_STEREO_DETECT 0x2 -#define TDA9840_INCORRECT_DETECT 0x3 - -#define TDA9840_SWITCH _IOW('v',2,int) -/* modes than can be set with TDA9840_SWITCH */ -#define TDA9840_SET_MUTE 0x00 -#define TDA9840_SET_MONO 0x10 -#define TDA9840_SET_STEREO 0x2a -#define TDA9840_SET_LANG1 0x12 -#define TDA9840_SET_LANG2 0x1e -#define TDA9840_SET_BOTH 0x1a -#define TDA9840_SET_BOTH_R 0x16 -#define TDA9840_SET_EXTERNAL 0x7a - /* values may range between +2.5 and -2.0; the value has to be multiplied with 10 */ #define TDA9840_LEVEL_ADJUST _IOW('v',3,int) @@ -29,7 +11,4 @@ the value has to be multiplied with 10 */ #define TDA9840_STEREO_ADJUST _IOW('v',4,int) -/* currently not implemented */ -#define TDA9840_TEST _IOW('v',5,int) - #endif diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index 421c1445e96..cde092adbb5 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -2,6 +2,7 @@ tea6415c - i2c-driver for the tea6415c by SGS Thomson Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> The tea6415c is a bus controlled video-matrix-switch with 8 inputs and 6 outputs. @@ -30,18 +31,18 @@ #include <linux/module.h> #include <linux/ioctl.h> #include <linux/i2c.h> - +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> #include "tea6415c.h" -static int debug; /* insmod parameter */ -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); +MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); +MODULE_DESCRIPTION("tea6415c driver"); +MODULE_LICENSE("GPL"); -#define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) +static int debug; +module_param(debug, int, 0644); -#define TEA6415C_NUM_INPUTS 8 -#define TEA6415C_NUM_OUTPUTS 6 +MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* addresses to scan, found only at 0x03 and/or 0x43 (7-bit) */ static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIENT_END }; @@ -49,60 +50,6 @@ static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIEN /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; -static struct i2c_driver driver; -static struct i2c_client client_template; - -/* this function is called by i2c_probe */ -static int detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client = NULL; - int err = 0; - - /* let's see whether this adapter can support what we need */ - if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) { - return 0; - } - - /* allocate memory for client structure */ - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) { - return -ENOMEM; - } - - /* fill client structure */ - memcpy(client, &client_template, sizeof(struct i2c_client)); - client->addr = address; - client->adapter = adapter; - - /* tell the i2c layer a new client has arrived */ - if (0 != (err = i2c_attach_client(client))) { - kfree(client); - return err; - } - - printk("tea6415c: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]); - - return 0; -} - -static int attach(struct i2c_adapter *adapter) -{ - /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_HW_SAA7146) { - dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); - return -ENODEV; - } - - return i2c_probe(adapter, &addr_data, &detect); -} - -static int detach(struct i2c_client *client) -{ - int ret = i2c_detach_client(client); - kfree(client); - return ret; -} - /* makes a connection between the input-pin 'i' and the output-pin 'o' for the tea6415c-client 'client' */ static int switch_matrix(struct i2c_client *client, int i, int o) @@ -110,7 +57,7 @@ static int switch_matrix(struct i2c_client *client, int i, int o) u8 byte = 0; int ret; - dprintk("adr:0x%02x, i:%d, o:%d\n", client->addr, i, o); + v4l_dbg(1, debug, client, "i=%d, o=%d\n", i, o); /* check if the pins are valid */ if (0 == ((1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i) @@ -168,14 +115,14 @@ static int switch_matrix(struct i2c_client *client, int i, int o) ret = i2c_smbus_write_byte(client, byte); if (ret) { - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret); + v4l_dbg(1, debug, client, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); return -EIO; } - return ret; } -static int command(struct i2c_client *client, unsigned int cmd, void *arg) +static int tea6415c_command(struct i2c_client *client, unsigned cmd, void *arg) { struct tea6415c_multiplex *v = (struct tea6415c_multiplex *)arg; int result = 0; @@ -187,38 +134,40 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) default: return -ENOIOCTLCMD; } - return result; } -static struct i2c_driver driver = { - .driver = { - .name = "tea6415c", - }, - .id = I2C_DRIVERID_TEA6415C, - .attach_adapter = attach, - .detach_client = detach, - .command = command, -}; - -static struct i2c_client client_template = { - .name = "tea6415c", - .driver = &driver, -}; - -static int __init this_module_init(void) +/* this function is called by i2c_probe */ +static int tea6415c_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - return i2c_add_driver(&driver); + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return 0; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + return 0; } -static void __exit this_module_exit(void) +static int tea6415c_legacy_probe(struct i2c_adapter *adapter) { - i2c_del_driver(&driver); + /* Let's see whether this is a known adapter we can attach to. + Prevents conflicts with tvaudio.c. */ + return adapter->id == I2C_HW_SAA7146; } -module_init(this_module_init); -module_exit(this_module_exit); +static const struct i2c_device_id tea6415c_id[] = { + { "tea6415c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tea6415c_id); -MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); -MODULE_DESCRIPTION("tea6415c driver"); -MODULE_LICENSE("GPL"); +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "tea6415c", + .driverid = I2C_DRIVERID_TEA6415C, + .command = tea6415c_command, + .probe = tea6415c_probe, + .legacy_probe = tea6415c_legacy_probe, + .id_table = tea6415c_id, +}; diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index b5c8957d130..e50820969e6 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -2,6 +2,7 @@ tea6420 - i2c-driver for the tea6420 by SGS Thomson Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, 4 stereo outputs and gain control for each output. @@ -30,15 +31,18 @@ #include <linux/module.h> #include <linux/ioctl.h> #include <linux/i2c.h> - +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> #include "tea6420.h" -static int debug; /* insmod parameter */ +MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); +MODULE_DESCRIPTION("tea6420 driver"); +MODULE_LICENSE("GPL"); + +static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); -#define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) +MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */ static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END }; @@ -46,23 +50,20 @@ static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; -static struct i2c_driver driver; -static struct i2c_client client_template; - /* make a connection between the input 'i' and the output 'o' with gain 'g' for the tea6420-client 'client' (note: i = 6 means 'mute') */ static int tea6420_switch(struct i2c_client *client, int i, int o, int g) { - u8 byte = 0; + u8 byte; int ret; - dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g); + v4l_dbg(1, debug, client, "i=%d, o=%d, g=%d\n", i, o, g); /* check if the parameters are valid */ if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0) return -1; - byte = ((o - 1) << 5); + byte = ((o - 1) << 5); byte |= (i - 1); /* to understand this, have a look at the tea6420-specs (p.5) */ @@ -82,40 +83,41 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g) ret = i2c_smbus_write_byte(client, byte); if (ret) { - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret); + v4l_dbg(1, debug, client, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); return -EIO; } - return 0; } -/* this function is called by i2c_probe */ -static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) +static int tea6420_command(struct i2c_client *client, unsigned cmd, void *arg) { - struct i2c_client *client; - int err = 0, i = 0; + struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg; + int result = 0; - /* let's see whether this adapter can support what we need */ - if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) { - return 0; + switch (cmd) { + case TEA6420_SWITCH: + result = tea6420_switch(client, a->in, a->out, a->gain); + break; + default: + return -ENOIOCTLCMD; } - /* allocate memory for client structure */ - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) { - return -ENOMEM; - } + return result; +} - /* fill client structure */ - memcpy(client, &client_template, sizeof(struct i2c_client)); - client->addr = address; - client->adapter = adapter; +/* this function is called by i2c_probe */ +static int tea6420_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err, i; - /* tell the i2c layer a new client has arrived */ - if (0 != (err = i2c_attach_client(client))) { - kfree(client); - return err; - } + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); /* set initial values: set "mute"-input to all outputs at gain 0 */ err = 0; @@ -123,78 +125,31 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) err += tea6420_switch(client, 6, i, 0); } if (err) { - dprintk("could not initialize tea6420\n"); + v4l_dbg(1, debug, client, "could not initialize tea6420\n"); kfree(client); return -ENODEV; } - - printk("tea6420: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]); - return 0; } -static int attach(struct i2c_adapter *adapter) +static int tea6420_legacy_probe(struct i2c_adapter *adapter) { - /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_HW_SAA7146) { - dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); - return -ENODEV; - } - - return i2c_probe(adapter, &addr_data, &tea6420_detect); -} - -static int detach(struct i2c_client *client) -{ - int ret = i2c_detach_client(client); - kfree(client); - return ret; -} - -static int command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg; - int result = 0; - - switch (cmd) { - case TEA6420_SWITCH: - result = tea6420_switch(client, a->in, a->out, a->gain); - break; - default: - return -ENOIOCTLCMD; - } - - return result; + /* Let's see whether this is a known adapter we can attach to. + Prevents conflicts with tvaudio.c. */ + return adapter->id == I2C_HW_SAA7146; } -static struct i2c_driver driver = { - .driver = { - .name = "tea6420", - }, - .id = I2C_DRIVERID_TEA6420, - .attach_adapter = attach, - .detach_client = detach, - .command = command, +static const struct i2c_device_id tea6420_id[] = { + { "tea6420", 0 }, + { } }; +MODULE_DEVICE_TABLE(i2c, tea6420_id); -static struct i2c_client client_template = { +static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tea6420", - .driver = &driver, + .driverid = I2C_DRIVERID_TEA6420, + .command = tea6420_command, + .probe = tea6420_probe, + .legacy_probe = tea6420_legacy_probe, + .id_table = tea6420_id, }; - -static int __init this_module_init(void) -{ - return i2c_add_driver(&driver); -} - -static void __exit this_module_exit(void) -{ - i2c_del_driver(&driver); -} - -module_init(this_module_init); -module_exit(this_module_exit); - -MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); -MODULE_DESCRIPTION("tea6420 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c deleted file mode 100644 index bdf506e6ae2..00000000000 --- a/drivers/media/video/tuner-3036.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Driver for Philips SAB3036 "CITAC" tuner control chip. - * - * Author: Phil Blundell <philb@gnu.org> - * - * The SAB3036 is just about different enough from the chips that - * tuner.c copes with to make it not worth the effort to crowbar - * the support into that file. So instead we have a separate driver. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include <linux/i2c.h> -#include <linux/videodev.h> -#include <media/v4l2-common.h> - -#include <media/tuner.h> - -static int debug; /* insmod parameter */ -static int this_adap; - -static struct i2c_client client_template; - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x60, 0x61, I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -/* ---------------------------------------------------------------------- */ - -static unsigned char -tuner_getstatus (struct i2c_client *c) -{ - unsigned char byte; - if (i2c_master_recv(c, &byte, 1) != 1) - printk(KERN_ERR "tuner-3036: I/O error.\n"); - return byte; -} - -#define TUNER_FL 0x80 - -static int -tuner_islocked (struct i2c_client *c) -{ - return (tuner_getstatus(c) & TUNER_FL); -} - -/* ---------------------------------------------------------------------- */ - -static void -set_tv_freq(struct i2c_client *c, int freq) -{ - u16 div = ((freq * 20) / 16); - unsigned long give_up = jiffies + HZ; - unsigned char buffer[2]; - - if (debug) - printk(KERN_DEBUG "tuner: setting frequency %dMHz, divisor %x\n", freq / 16, div); - - /* Select high tuning current */ - buffer[0] = 0x29; - buffer[1] = 0x3e; - - if (i2c_master_send(c, buffer, 2) != 2) - printk("tuner: i2c i/o error 1\n"); - - buffer[0] = 0x80 | ((div>>8) & 0x7f); - buffer[1] = div & 0xff; - - if (i2c_master_send(c, buffer, 2) != 2) - printk("tuner: i2c i/o error 2\n"); - - while (!tuner_islocked(c) && time_before(jiffies, give_up)) - schedule(); - - if (!tuner_islocked(c)) - printk(KERN_WARNING "tuner: failed to achieve PLL lock\n"); - - /* Select low tuning current and engage AFC */ - buffer[0] = 0x29; - buffer[1] = 0xb2; - - if (i2c_master_send(c, buffer, 2) != 2) - printk("tuner: i2c i/o error 3\n"); - - if (debug) - printk(KERN_DEBUG "tuner: status %02x\n", tuner_getstatus(c)); -} - -/* ---------------------------------------------------------------------- */ - -static int -tuner_attach(struct i2c_adapter *adap, int addr, int kind) -{ - static unsigned char buffer[] = { 0x29, 0x32, 0x2a, 0, 0x2b, 0 }; - - struct i2c_client *client; - - if (this_adap > 0) - return -1; - this_adap++; - - client_template.adapter = adap; - client_template.addr = addr; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &client_template, sizeof(struct i2c_client)); - - printk("tuner: SAB3036 found, status %02x\n", tuner_getstatus(client)); - - i2c_attach_client(client); - - if (i2c_master_send(client, buffer, 2) != 2) - printk("tuner: i2c i/o error 1\n"); - if (i2c_master_send(client, buffer+2, 2) != 2) - printk("tuner: i2c i/o error 2\n"); - if (i2c_master_send(client, buffer+4, 2) != 2) - printk("tuner: i2c i/o error 3\n"); - return 0; -} - -static int -tuner_detach(struct i2c_client *c) -{ - return 0; -} - -static int -tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - int *iarg = (int*)arg; - - switch (cmd) - { - case VIDIOCSFREQ: - set_tv_freq(client, *iarg); - break; - - default: - return -EINVAL; - } - return 0; -} - -static int -tuner_probe(struct i2c_adapter *adap) -{ - this_adap = 0; - if (adap->id == I2C_HW_B_LP) - return i2c_probe(adap, &addr_data, tuner_attach); - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static struct i2c_driver -i2c_driver_tuner = -{ - .driver = { - .name = "sab3036", - }, - .id = I2C_DRIVERID_SAB3036, - .attach_adapter = tuner_probe, - .detach_client = tuner_detach, - .command = tuner_command -}; - -static struct i2c_client client_template = -{ - .driver = &i2c_driver_tuner, - .name = "SAB3036", -}; - -static int __init -tuner3036_init(void) -{ - return i2c_add_driver(&i2c_driver_tuner); -} - -static void __exit -tuner3036_exit(void) -{ - i2c_del_driver(&i2c_driver_tuner); -} - -MODULE_DESCRIPTION("SAB3036 tuner driver"); -MODULE_AUTHOR("Philip Blundell <philb@gnu.org>"); -MODULE_LICENSE("GPL"); - -module_param(debug, int, 0); -MODULE_PARM_DESC(debug,"Enable debugging output"); - -module_init(tuner3036_init); -module_exit(tuner3036_exit); diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index d806a3556ee..4a7735c6c1a 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -92,7 +92,6 @@ struct tuner { unsigned int type; /* chip type id */ unsigned int config; - int (*tuner_callback) (void *dev, int command, int arg); const char *name; }; @@ -346,7 +345,7 @@ static struct xc5000_config xc5000_cfg; static void set_type(struct i2c_client *c, unsigned int type, unsigned int new_mode_mask, unsigned int new_config, - int (*tuner_callback) (void *dev, int command,int arg)) + int (*tuner_callback) (void *dev, int component, int cmd, int arg)) { struct tuner *t = i2c_get_clientdata(c); struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; @@ -362,7 +361,7 @@ static void set_type(struct i2c_client *c, unsigned int type, t->config = new_config; if (tuner_callback != NULL) { tuner_dbg("defining GPIO callback\n"); - t->tuner_callback = tuner_callback; + t->fe.callback = tuner_callback; } if (t->mode == T_UNINITIALIZED) { @@ -385,7 +384,6 @@ static void set_type(struct i2c_client *c, unsigned int type, { struct tda829x_config cfg = { .lna_cfg = t->config, - .tuner_callback = t->tuner_callback, }; if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter, t->i2c->addr, &cfg)) @@ -433,7 +431,6 @@ static void set_type(struct i2c_client *c, unsigned int type, struct xc2028_config cfg = { .i2c_adap = t->i2c->adapter, .i2c_addr = t->i2c->addr, - .callback = t->tuner_callback, }; if (!dvb_attach(xc2028_attach, &t->fe, &cfg)) goto attach_failed; @@ -450,10 +447,8 @@ static void set_type(struct i2c_client *c, unsigned int type, xc5000_cfg.i2c_address = t->i2c->addr; xc5000_cfg.if_khz = 5380; - xc5000_cfg.tuner_callback = t->tuner_callback; if (!dvb_attach(xc5000_attach, - &t->fe, t->i2c->adapter, &xc5000_cfg, - c->adapter->algo_data)) + &t->fe, t->i2c->adapter, &xc5000_cfg)) goto attach_failed; xc_tuner_ops = &t->fe.ops.tuner_ops; @@ -1225,7 +1220,7 @@ register_client: } else { t->mode = V4L2_TUNER_DIGITAL_TV; } - set_type(client, t->type, t->mode_mask, t->config, t->tuner_callback); + set_type(client, t->type, t->mode_mask, t->config, t->fe.callback); list_add_tail(&t->list, &tuner_list); return 0; } diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 463680b1328..b59e47272ab 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1792,7 +1792,7 @@ static int chip_command(struct i2c_client *client, break; case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - if (desc->checkmode) { + if (desc->checkmode && desc->setmode) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); if (chip->prevmode != V4L2_TUNER_MODE_MONO) chip->prevmode = -1; /* reset previous mode */ diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index bcc32fa92a8..3b0b84c2e45 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -242,7 +242,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "TCL M2523_3DBH_E"}, { TUNER_ABSENT, "TCL M2523_3DIH_E"}, { TUNER_ABSENT, "TCL MFPE05_2_U"}, - { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216MEX"}, + { TUNER_PHILIPS_FMD1216MEX_MK3, "Philips FMD1216MEX"}, { TUNER_ABSENT, "Philips FRH2036B"}, { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, { TUNER_ABSENT, "MaxLinear MXL5005"}, diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index cc27efe121d..28421d386f1 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -258,7 +258,9 @@ static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame h (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00)) { #if 0 /* This code helps to detect new frame markers */ - info("Header sig: 00 FF 00 %02X", RING_QUEUE_PEEK(&uvd->dp, 3)); + dev_info(&uvd->dev->dev, + "Header sig: 00 FF 00 %02X\n", + RING_QUEUE_PEEK(&uvd->dp, 3)); #endif frame->header = RING_QUEUE_PEEK(&uvd->dp, 3); if ((frame->header == HDRSIG_MODEL1_128x96) || @@ -266,7 +268,8 @@ static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame h (frame->header == HDRSIG_MODEL1_352x288)) { #if 0 - info("Header found."); + dev_info(&uvd->dev->dev, + "Header found.\n"); #endif RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); icam->has_hdr = 1; @@ -295,7 +298,7 @@ case IBMCAM_MODEL_4: (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF)) { #if 0 - info("Header found."); + dev_info(&uvd->dev->dev, "Header found.\n"); #endif RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); icam->has_hdr = 1; @@ -338,7 +341,7 @@ case IBMCAM_MODEL_4: byte4 = RING_QUEUE_PEEK(&uvd->dp, 3); frame->header = (byte3 << 8) | byte4; #if 0 - info("Header found."); + dev_info(&uvd->dev->dev, "Header found.\n"); #endif RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); icam->has_hdr = 1; @@ -354,7 +357,8 @@ case IBMCAM_MODEL_4: } if (!icam->has_hdr) { if (uvd->debug > 2) - info("Skipping frame, no header"); + dev_info(&uvd->dev->dev, + "Skipping frame, no header\n"); return scan_EndParse; } @@ -881,7 +885,9 @@ static enum ParseState ibmcam_model3_parse_lines( */ if ((frame->curline + 1) >= data_h) { if (uvd->debug >= 3) - info("Reached line %d. (frame is done)", frame->curline); + dev_info(&uvd->dev->dev, + "Reached line %d. (frame is done)\n", + frame->curline); return scan_NextFrame; } @@ -954,8 +960,9 @@ static enum ParseState ibmcam_model3_parse_lines( if (frame->curline >= VIDEOSIZE_Y(frame->request)) { if (uvd->debug >= 3) { - info("All requested lines (%ld.) done.", - VIDEOSIZE_Y(frame->request)); + dev_info(&uvd->dev->dev, + "All requested lines (%ld.) done.\n", + VIDEOSIZE_Y(frame->request)); } return scan_NextFrame; } else @@ -1000,7 +1007,9 @@ static enum ParseState ibmcam_model4_128x96_parse_lines( */ if ((frame->curline + 1) >= data_h) { if (uvd->debug >= 3) - info("Reached line %d. (frame is done)", frame->curline); + dev_info(&uvd->dev->dev, + "Reached line %d. (frame is done)\n", + frame->curline); return scan_NextFrame; } @@ -1049,8 +1058,9 @@ static enum ParseState ibmcam_model4_128x96_parse_lines( if (frame->curline >= VIDEOSIZE_Y(frame->request)) { if (uvd->debug >= 3) { - info("All requested lines (%ld.) done.", - VIDEOSIZE_Y(frame->request)); + dev_info(&uvd->dev->dev, + "All requested lines (%ld.) done.\n", + VIDEOSIZE_Y(frame->request)); } return scan_NextFrame; } else @@ -1171,10 +1181,11 @@ static int ibmcam_veio( sizeof(cp), 1000); #if 0 - info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " - "(req=$%02x val=$%04x ind=$%04x)", - cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], - req, value, index); + dev_info(&uvd->dev->dev, + "USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)\n", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); #endif } else { i = usb_control_msg( @@ -1449,10 +1460,9 @@ static void ibmcam_adjust_contrast(struct uvd *uvd) */ static void ibmcam_change_lighting_conditions(struct uvd *uvd) { - static const char proc[] = "ibmcam_change_lighting_conditions"; - if (debug > 0) - info("%s: Set lighting to %hu.", proc, lighting); + dev_info(&uvd->dev->dev, + "%s: Set lighting to %hu.\n", __func__, lighting); switch (IBMCAM_T(uvd)->camera_model) { case IBMCAM_MODEL_1: @@ -1495,8 +1505,6 @@ static void ibmcam_change_lighting_conditions(struct uvd *uvd) */ static void ibmcam_set_sharpness(struct uvd *uvd) { - static const char proc[] = "ibmcam_set_sharpness"; - switch (IBMCAM_T(uvd)->camera_model) { case IBMCAM_MODEL_1: { @@ -1505,7 +1513,8 @@ static void ibmcam_set_sharpness(struct uvd *uvd) RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX); if (debug > 0) - info("%s: Set sharpness to %hu.", proc, sharpness); + dev_info(&uvd->dev->dev, "%s: Set sharpness to %hu.\n", + __func__, sharpness); sv = sa[sharpness - SHARPNESS_MIN]; for (i=0; i < 2; i++) { @@ -1564,11 +1573,11 @@ static void ibmcam_set_sharpness(struct uvd *uvd) */ static void ibmcam_set_brightness(struct uvd *uvd) { - static const char proc[] = "ibmcam_set_brightness"; static const unsigned short n = 1; if (debug > 0) - info("%s: Set brightness to %hu.", proc, uvd->vpic.brightness); + dev_info(&uvd->dev->dev, "%s: Set brightness to %hu.\n", + __func__, uvd->vpic.brightness); switch (IBMCAM_T(uvd)->camera_model) { case IBMCAM_MODEL_1: @@ -2115,7 +2124,8 @@ static void ibmcam_model2_setup_after_video_if(struct uvd *uvd) break; } if (uvd->debug > 0) - info("Framerate (hardware): %hd.", hw_fps); + dev_info(&uvd->dev->dev, "Framerate (hardware): %hd.\n", + hw_fps); RESTRICT_TO_RANGE(hw_fps, 0, 31); ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps); } @@ -3487,7 +3497,7 @@ static void ibmcam_model3_setup_after_video_if(struct uvd *uvd) /* 01.01.08 - Added for RCA video in support -LO */ if(init_model3_input) { if (debug > 0) - info("Setting input to RCA."); + dev_info(&uvd->dev->dev, "Setting input to RCA.\n"); for (i=0; i < ARRAY_SIZE(initData); i++) { ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index); } @@ -3685,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * unsigned char video_ep = 0; if (debug >= 1) - info("ibmcam_probe(%p,%u.)", intf, ifnum); + dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -3736,14 +3746,16 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ break; } - info("%s USB camera found (model %d, rev. 0x%04x)", - brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); + dev_info(&uvd->dev->dev, + "%s USB camera found (model %d, rev. 0x%04x)\n", + brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); } while (0); /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - info("Number of alternate settings=%d.", nas); + dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n", + nas); if (nas < 2) { err("Too few alternate settings for this camera!"); return -ENODEV; @@ -3787,7 +3799,9 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - info("Active setting=%d. maxPS=%d.", i, maxPS); + dev_info(&uvd->dev->dev, + "Active setting=%d. " + "maxPS=%d.\n", i, maxPS); } else err("More than one active alt. setting! Ignoring #%d.", i); } @@ -3826,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * RESTRICT_TO_RANGE(framerate, 0, 5); break; default: - info("IBM camera: using 320x240"); + dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n"); size = SIZE_320x240; /* No break here */ case SIZE_320x240: @@ -3855,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * canvasY = 120; break; default: - info("IBM NetCamera: using 176x144"); + dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n"); size = SIZE_176x144; /* No break here */ case SIZE_176x144: diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c index 1c180284ec6..da27a528798 100644 --- a/drivers/media/video/usbvideo/konicawc.c +++ b/drivers/media/video/usbvideo/konicawc.c @@ -229,7 +229,8 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev cam->input = input_dev = input_allocate_device(); if (!input_dev) { - warn("Not enough memory for camera's input device\n"); + dev_warn(&dev->dev, + "Not enough memory for camera's input device\n"); return; } @@ -243,8 +244,9 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev error = input_register_device(cam->input); if (error) { - warn("Failed to register camera's input device, err: %d\n", - error); + dev_warn(&dev->dev, + "Failed to register camera's input device, err: %d\n", + error); input_free_device(cam->input); cam->input = NULL; } @@ -337,7 +339,8 @@ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct ur } if((sts > 0x01) && (sts < 0x80)) { - info("unknown status %2.2x", sts); + dev_info(&uvd->dev->dev, "unknown status %2.2x\n", + sts); bad++; continue; } @@ -568,8 +571,12 @@ static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame) fdrops = (0x80 + curframe - cam->lastframe) & 0x7F; fdrops--; if(fdrops) { - info("Dropped %d frames (%d -> %d)", fdrops, - cam->lastframe, curframe); + dev_info(&uvd->dev->dev, + "Dropped %d frames " + "(%d -> %d)\n", + fdrops, + cam->lastframe, + curframe); } } cam->lastframe = curframe; @@ -784,7 +791,8 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id if (dev->descriptor.bNumConfigurations != 1) return -ENODEV; - info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice)); + dev_info(&intf->dev, "Konica Webcam (rev. 0x%04x)\n", + le16_to_cpu(dev->descriptor.bcdDevice)); RESTRICT_TO_RANGE(speed, 0, MAX_SPEED); /* Validate found interface: must have one ISO endpoint */ @@ -925,7 +933,8 @@ static struct usb_device_id id_table[] = { static int __init konicawc_init(void) { struct usbvideo_cb cbTbl; - info(DRIVER_DESC " " DRIVER_VERSION); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); memset(&cbTbl, 0, sizeof(cbTbl)); cbTbl.probe = konicawc_probe; cbTbl.setupOnOpen = konicawc_setup_on_open; diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 3d26a30abe1..4459b8a7f81 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -93,7 +93,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) cam->input = input_dev = input_allocate_device(); if (!input_dev) { - warn("insufficient mem for cam input device"); + dev_warn(&dev->dev, "insufficient mem for cam input device\n"); return; } @@ -107,8 +107,9 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) error = input_register_device(cam->input); if (error) { - warn("Failed to register camera's input device, err: %d\n", - error); + dev_warn(&dev->dev, + "Failed to register camera's input device, err: %d\n", + error); input_free_device(cam->input); cam->input = NULL; } @@ -587,8 +588,9 @@ static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb) dataurb->iso_frame_desc[i].offset; if (st < 0) { - warn("Data error: packet=%d. len=%d. status=%d.", - i, n, st); + dev_warn(&uvd->dev->dev, + "Data error: packet=%d. len=%d. status=%d.\n", + i, n, st); uvd->stats.iso_err_count++; continue; } @@ -699,7 +701,7 @@ static void qcm_stop_data(struct uvd *uvd) ret = qcm_camera_off(uvd); if (ret) - warn("couldn't turn the cam off."); + dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n"); uvd->streaming = 0; @@ -1080,7 +1082,8 @@ static struct usbvideo_cb qcm_driver = { static int __init qcm_init(void) { - info(DRIVER_DESC " " DRIVER_VERSION); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return usbvideo_register( &cams, diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c index 9544e644bf0..9714baab783 100644 --- a/drivers/media/video/usbvideo/ultracam.c +++ b/drivers/media/video/usbvideo/ultracam.c @@ -156,10 +156,11 @@ static int ultracam_veio( sizeof(cp), 1000); #if 1 - info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " - "(req=$%02x val=$%04x ind=$%04x)", - cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], - req, value, index); + dev_info(&uvd->dev->dev, + "USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)\n", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); #endif } else { i = usb_control_msg( @@ -517,19 +518,20 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id unsigned char video_ep = 0; if (debug >= 1) - info("ultracam_probe(%p)", intf); + dev_info(&intf->dev, "ultracam_probe\n"); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) return -ENODEV; - info("IBM Ultra camera found (rev. 0x%04x)", - le16_to_cpu(dev->descriptor.bcdDevice)); + dev_info(&intf->dev, "IBM Ultra camera found (rev. 0x%04x)\n", + le16_to_cpu(dev->descriptor.bcdDevice)); /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - info("Number of alternate settings=%d.", nas); + dev_info(&intf->dev, "Number of alternate settings=%d.\n", + nas); if (nas < 8) { err("Too few alternate settings for this camera!"); return -ENODEV; @@ -576,7 +578,9 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - info("Active setting=%d. maxPS=%d.", i, maxPS); + dev_info(&intf->dev, + "Active setting=%d. " + "maxPS=%d.\n", i, maxPS); } else { /* Got another active alt. setting */ if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) { @@ -584,8 +588,11 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) { - info("Even better ctive setting=%d. maxPS=%d.", - i, maxPS); + dev_info(&intf->dev, + "Even better ctive " + "setting=%d. " + "maxPS=%d.\n", + i, maxPS); } } } diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index bf1bc2f69b0..07cd87d16f6 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -468,8 +468,9 @@ static void usbvideo_ReportStatistics(const struct uvd *uvd) percent = (100 * goodPackets) / allPackets; else percent = goodPackets / (allPackets / 100); - info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%", - allPackets, badPackets, percent); + dev_info(&uvd->dev->dev, + "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n", + allPackets, badPackets, percent); if (uvd->iso_packet_len > 0) { unsigned long allBytes, xferBytes; char multiplier = ' '; @@ -497,8 +498,9 @@ static void usbvideo_ReportStatistics(const struct uvd *uvd) } } } - info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%", - xferBytes, multiplier, percent); + dev_info(&uvd->dev->dev, + "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n", + xferBytes, multiplier, percent); } } } @@ -545,7 +547,7 @@ void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode) { /* For debugging purposes only */ char tmp[20]; usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request); - info("testpattern: frame=%s", tmp); + dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp); } #endif /* Form every scan line */ @@ -854,7 +856,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf) usbvideo_ClientIncModCount(uvd); if (uvd->debug > 0) - info("%s(%p.)", __func__, intf); + dev_info(&intf->dev, "%s(%p.)\n", __func__, intf); mutex_lock(&uvd->lock); uvd->remove_pending = 1; /* Now all ISO data will be ignored */ @@ -870,14 +872,15 @@ static void usbvideo_Disconnect(struct usb_interface *intf) video_unregister_device(&uvd->vdev); if (uvd->debug > 0) - info("%s: Video unregistered.", __func__); + dev_info(&intf->dev, "%s: Video unregistered.\n", __func__); if (uvd->user) - info("%s: In use, disconnect pending.", __func__); + dev_info(&intf->dev, "%s: In use, disconnect pending.\n", + __func__); else usbvideo_CameraRelease(uvd); mutex_unlock(&uvd->lock); - info("USB camera disconnected."); + dev_info(&intf->dev, "USB camera disconnected.\n"); usbvideo_ClientDecModCount(uvd); } @@ -1015,14 +1018,17 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) return -EINVAL; } if (uvd->video_endp == 0) { - info("%s: No video endpoint specified; data pump disabled.", __func__); + dev_info(&uvd->dev->dev, + "%s: No video endpoint specified; data pump disabled.\n", + __func__); } if (uvd->paletteBits == 0) { err("%s: No palettes specified!", __func__); return -EINVAL; } if (uvd->defaultPalette == 0) { - info("%s: No default palette!", __func__); + dev_info(&uvd->dev->dev, "%s: No default palette!\n", + __func__); } uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) * @@ -1031,25 +1037,29 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas); if (uvd->debug > 0) { - info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx", - __func__, uvd->iface, uvd->video_endp, uvd->paletteBits); + dev_info(&uvd->dev->dev, + "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n", + __func__, uvd->iface, uvd->video_endp, + uvd->paletteBits); } if (uvd->dev == NULL) { err("%s: uvd->dev == NULL", __func__); return -EINVAL; } uvd->vdev.parent = &uvd->dev->dev; - if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + uvd->vdev.release = video_device_release_empty; + if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { err("%s: video_register_device failed", __func__); return -EPIPE; } if (uvd->debug > 1) { - info("%s: video_register_device() successful", __func__); + dev_info(&uvd->dev->dev, + "%s: video_register_device() successful\n", __func__); } - info("%s on /dev/video%d: canvas=%s videosize=%s", - (uvd->handle != NULL) ? uvd->handle->drvName : "???", - uvd->vdev.minor, tmp2, tmp1); + dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n", + (uvd->handle != NULL) ? uvd->handle->drvName : "???", + uvd->vdev.minor, tmp2, tmp1); usb_get_dev(uvd->dev); return 0; @@ -1111,7 +1121,7 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) int i, errCode = 0; if (uvd->debug > 1) - info("%s($%p)", __func__, dev); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev); if (0 < usbvideo_ClientIncModCount(uvd)) return -ENODEV; @@ -1178,19 +1188,25 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) if (errCode == 0) { if (VALID_CALLBACK(uvd, setupOnOpen)) { if (uvd->debug > 1) - info("%s: setupOnOpen callback", __func__); + dev_info(&uvd->dev->dev, + "%s: setupOnOpen callback\n", + __func__); errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd); if (errCode < 0) { err("%s: setupOnOpen callback failed (%d.).", __func__, errCode); } else if (uvd->debug > 1) { - info("%s: setupOnOpen callback successful", __func__); + dev_info(&uvd->dev->dev, + "%s: setupOnOpen callback successful\n", + __func__); } } if (errCode == 0) { uvd->settingsAdjusted = 0; if (uvd->debug > 1) - info("%s: Open succeeded.", __func__); + dev_info(&uvd->dev->dev, + "%s: Open succeeded.\n", + __func__); uvd->user++; file->private_data = uvd; } @@ -1200,7 +1216,8 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) if (errCode != 0) usbvideo_ClientDecModCount(uvd); if (uvd->debug > 0) - info("%s: Returning %d.", __func__, errCode); + dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__, + errCode); return errCode; } @@ -1223,7 +1240,7 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file) int i; if (uvd->debug > 1) - info("%s($%p)", __func__, dev); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev); mutex_lock(&uvd->lock); GET_CALLBACK(uvd, stopDataPump)(uvd); @@ -1243,14 +1260,15 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file) uvd->user--; if (uvd->remove_pending) { if (uvd->debug > 0) - info("usbvideo_v4l_close: Final disconnect."); + dev_info(&uvd->dev->dev, "%s: Final disconnect.\n", + __func__); usbvideo_CameraRelease(uvd); } mutex_unlock(&uvd->lock); usbvideo_ClientDecModCount(uvd); if (uvd->debug > 1) - info("%s: Completed.", __func__); + dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__); file->private_data = NULL; return 0; } @@ -1364,8 +1382,9 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, struct video_mmap *vm = arg; if (uvd->debug >= 1) { - info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.", - vm->frame, vm->width, vm->height, vm->format); + dev_info(&uvd->dev->dev, + "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n", + vm->frame, vm->width, vm->height, vm->format); } /* * Check if the requested size is supported. If the requestor @@ -1383,18 +1402,24 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, if ((vm->width > VIDEOSIZE_X(uvd->canvas)) || (vm->height > VIDEOSIZE_Y(uvd->canvas))) { if (uvd->debug > 0) { - info("VIDIOCMCAPTURE: Size=%dx%d too large; " - "allowed only up to %ldx%ld", vm->width, vm->height, - VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas)); + dev_info(&uvd->dev->dev, + "VIDIOCMCAPTURE: Size=%dx%d " + "too large; allowed only up " + "to %ldx%ld\n", vm->width, + vm->height, + VIDEOSIZE_X(uvd->canvas), + VIDEOSIZE_Y(uvd->canvas)); } return -EINVAL; } /* Check if the palette is supported */ if (((1L << vm->format) & uvd->paletteBits) == 0) { if (uvd->debug > 0) { - info("VIDIOCMCAPTURE: format=%d. not supported" - " (paletteBits=$%08lx)", - vm->format, uvd->paletteBits); + dev_info(&uvd->dev->dev, + "VIDIOCMCAPTURE: format=%d. " + "not supported " + "(paletteBits=$%08lx)\n", + vm->format, uvd->paletteBits); } return -EINVAL; } @@ -1422,7 +1447,9 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (uvd->debug >= 1) - info("VIDIOCSYNC: syncing to frame %d.", *frameNum); + dev_info(&uvd->dev->dev, + "VIDIOCSYNC: syncing to frame %d.\n", + *frameNum); if (uvd->flags & FLAGS_NO_DECODING) ret = usbvideo_GetFrame(uvd, *frameNum); else if (VALID_CALLBACK(uvd, getFrame)) { @@ -1504,7 +1531,9 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, return -EFAULT; if (uvd->debug >= 1) - info("%s: %Zd. bytes, noblock=%d.", __func__, count, noblock); + dev_info(&uvd->dev->dev, + "%s: %Zd. bytes, noblock=%d.\n", + __func__, count, noblock); mutex_lock(&uvd->lock); @@ -1685,18 +1714,21 @@ static void usbvideo_IsocIrq(struct urb *urb) return; #if 0 if (urb->actual_length > 0) { - info("urb=$%p status=%d. errcount=%d. length=%d.", - urb, urb->status, urb->error_count, urb->actual_length); + dev_info(&uvd->dev->dev, + "urb=$%p status=%d. errcount=%d. length=%d.\n", + urb, urb->status, urb->error_count, + urb->actual_length); } else { static int c = 0; if (c++ % 100 == 0) - info("No Isoc data"); + dev_info(&uvd->dev->dev, "No Isoc data\n"); } #endif if (!uvd->streaming) { if (uvd->debug >= 1) - info("Not streaming, but interrupt!"); + dev_info(&uvd->dev->dev, + "Not streaming, but interrupt!\n"); return; } @@ -1741,7 +1773,7 @@ static int usbvideo_StartDataPump(struct uvd *uvd) int i, errFlag; if (uvd->debug > 1) - info("%s($%p)", __func__, uvd); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd); if (!CAMERA_IS_OPERATIONAL(uvd)) { err("%s: Camera is not operational", __func__); @@ -1789,7 +1821,9 @@ static int usbvideo_StartDataPump(struct uvd *uvd) uvd->streaming = 1; if (uvd->debug > 1) - info("%s: streaming=1 video_endp=$%02x", __func__, uvd->video_endp); + dev_info(&uvd->dev->dev, + "%s: streaming=1 video_endp=$%02x\n", __func__, + uvd->video_endp); return 0; } @@ -1811,14 +1845,14 @@ static void usbvideo_StopDataPump(struct uvd *uvd) return; if (uvd->debug > 1) - info("%s($%p)", __func__, uvd); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd); /* Unschedule all of the iso td's */ for (i=0; i < USBVIDEO_NUMSBUF; i++) { usb_kill_urb(uvd->sbuf[i].urb); } if (uvd->debug > 1) - info("%s: streaming=0", __func__); + dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__); uvd->streaming = 0; if (!uvd->remove_pending) { @@ -1850,7 +1884,8 @@ static int usbvideo_NewFrame(struct uvd *uvd, int framenum) int n; if (uvd->debug > 1) - info("usbvideo_NewFrame($%p,%d.)", uvd, framenum); + dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd, + framenum); /* If we're not grabbing a frame right now and the other frame is */ /* ready to be grabbed into, then use it instead */ @@ -1955,12 +1990,14 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) struct usbvideo_frame *frame = &uvd->frame[frameNum]; if (uvd->debug >= 2) - info("%s($%p,%d.)", __func__, uvd, frameNum); + dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd, + frameNum); switch (frame->frameState) { case FrameState_Unused: if (uvd->debug >= 2) - info("%s: FrameState_Unused", __func__); + dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n", + __func__); return -EINVAL; case FrameState_Ready: case FrameState_Grabbing: @@ -1970,7 +2007,9 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) redo: if (!CAMERA_IS_OPERATIONAL(uvd)) { if (uvd->debug >= 2) - info("%s: Camera is not operational (1)", __func__); + dev_info(&uvd->dev->dev, + "%s: Camera is not operational (1)\n", + __func__); return -EIO; } ntries = 0; @@ -1979,24 +2018,33 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) signalPending = signal_pending(current); if (!CAMERA_IS_OPERATIONAL(uvd)) { if (uvd->debug >= 2) - info("%s: Camera is not operational (2)", __func__); + dev_info(&uvd->dev->dev, + "%s: Camera is not " + "operational (2)\n", __func__); return -EIO; } assert(uvd->fbuf != NULL); if (signalPending) { if (uvd->debug >= 2) - info("%s: Signal=$%08x", __func__, signalPending); + dev_info(&uvd->dev->dev, + "%s: Signal=$%08x\n", __func__, + signalPending); if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) { usbvideo_TestPattern(uvd, 1, 0); uvd->curframe = -1; uvd->stats.frame_num++; if (uvd->debug >= 2) - info("%s: Forced test pattern screen", __func__); + dev_info(&uvd->dev->dev, + "%s: Forced test " + "pattern screen\n", + __func__); return 0; } else { /* Standard answer: Interrupted! */ if (uvd->debug >= 2) - info("%s: Interrupted!", __func__); + dev_info(&uvd->dev->dev, + "%s: Interrupted!\n", + __func__); return -EINTR; } } else { @@ -2010,8 +2058,10 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) } } while (frame->frameState == FrameState_Grabbing); if (uvd->debug >= 2) { - info("%s: Grabbing done; state=%d. (%lu. bytes)", - __func__, frame->frameState, frame->seqRead_Length); + dev_info(&uvd->dev->dev, + "%s: Grabbing done; state=%d. (%lu. bytes)\n", + __func__, frame->frameState, + frame->seqRead_Length); } if (frame->frameState == FrameState_Error) { int ret = usbvideo_NewFrame(uvd, frameNum); @@ -2048,7 +2098,9 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) } frame->frameState = FrameState_Done_Hold; if (uvd->debug >= 2) - info("%s: Entered FrameState_Done_Hold state.", __func__); + dev_info(&uvd->dev->dev, + "%s: Entered FrameState_Done_Hold state.\n", + __func__); return 0; case FrameState_Done_Hold: @@ -2059,7 +2111,9 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) * it will be released back into the wild to roam freely. */ if (uvd->debug >= 2) - info("%s: FrameState_Done_Hold state.", __func__); + dev_info(&uvd->dev->dev, + "%s: FrameState_Done_Hold state.\n", + __func__); return 0; } diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 2eb45829791..7a127d6bfde 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -472,9 +472,8 @@ vicam_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, unsign static int vicam_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct vicam_camera *cam = - (struct vicam_camera *) dev->priv; + struct vicam_camera *cam = video_drvdata(file); + DBG("open\n"); if (!cam) { @@ -488,20 +487,24 @@ vicam_open(struct inode *inode, struct file *file) * rely on this fact forever. */ + lock_kernel(); if (cam->open_count > 0) { printk(KERN_INFO "vicam_open called on already opened camera"); + unlock_kernel(); return -EBUSY; } cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL); if (!cam->raw_image) { + unlock_kernel(); return -ENOMEM; } cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); if (!cam->framebuf) { kfree(cam->raw_image); + unlock_kernel(); return -ENOMEM; } @@ -509,6 +512,7 @@ vicam_open(struct inode *inode, struct file *file) if (!cam->cntrlbuf) { kfree(cam->raw_image); rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + unlock_kernel(); return -ENOMEM; } @@ -526,6 +530,7 @@ vicam_open(struct inode *inode, struct file *file) cam->open_count++; file->private_data = cam; + unlock_kernel(); return 0; } @@ -795,6 +800,7 @@ static struct video_device vicam_template = { .name = "ViCam-based USB Camera", .fops = &vicam_fops, .minor = -1, + .release = video_device_release_empty, }; /* table of devices that work with this driver */ @@ -859,9 +865,8 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) mutex_init(&cam->cam_lock); - memcpy(&cam->vdev, &vicam_template, - sizeof (vicam_template)); - cam->vdev.priv = cam; // sort of a reverse mapping for those functions that get vdev only + memcpy(&cam->vdev, &vicam_template, sizeof(vicam_template)); + video_set_drvdata(&cam->vdev, cam); cam->udev = dev; cam->bulkEndpoint = bulkEndpoint; diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index c317ed7a848..9e4f5063997 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -45,10 +45,6 @@ #include <linux/workqueue.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - #include "usbvision.h" static unsigned int core_debug; @@ -84,7 +80,8 @@ MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]"); #ifdef USBVISION_DEBUG #define PDEBUG(level, fmt, args...) { \ if (core_debug & (level)) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ } #else #define PDEBUG(level, fmt, args...) do {} while(0) diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index a6d00858b07..92427fdc145 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -47,7 +47,8 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); #define PDEBUG(level, fmt, args...) { \ if (i2c_debug & (level)) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ } static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf, diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index b977116a0dd..77aeb39b275 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -69,10 +69,6 @@ #include <linux/workqueue.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - #include "usbvision.h" #include "usbvision-cards.h" @@ -98,7 +94,8 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL) #ifdef USBVISION_DEBUG #define PDEBUG(level, fmt, args...) { \ if (video_debug & (level)) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ } #else #define PDEBUG(level, fmt, args...) do {} while(0) @@ -360,13 +357,12 @@ static void usbvision_remove_sysfs(struct video_device *vdev) */ static int usbvision_v4l2_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode = 0; PDEBUG(DBG_IO, "open"); + lock_kernel(); usbvision_reset_powerOffTimer(usbvision); if (usbvision->user) @@ -424,6 +420,7 @@ static int usbvision_v4l2_open(struct inode *inode, struct file *file) usbvision_empty_framequeues(usbvision); PDEBUG(DBG_IO, "success"); + unlock_kernel(); return errCode; } @@ -437,9 +434,7 @@ static int usbvision_v4l2_open(struct inode *inode, struct file *file) */ static int usbvision_v4l2_close(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); PDEBUG(DBG_IO, "close"); mutex_lock(&usbvision->lock); @@ -484,9 +479,7 @@ static int usbvision_v4l2_close(struct inode *inode, struct file *file) static int vidioc_g_register (struct file *file, void *priv, struct v4l2_register *reg) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode; if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) @@ -505,9 +498,7 @@ static int vidioc_g_register (struct file *file, void *priv, static int vidioc_s_register (struct file *file, void *priv, struct v4l2_register *reg) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode; if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) @@ -526,9 +517,7 @@ static int vidioc_s_register (struct file *file, void *priv, static int vidioc_querycap (struct file *file, void *priv, struct v4l2_capability *vc) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); strlcpy(vc->card, @@ -548,9 +537,7 @@ static int vidioc_querycap (struct file *file, void *priv, static int vidioc_enum_input (struct file *file, void *priv, struct v4l2_input *vi) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int chan; if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) ) @@ -603,9 +590,7 @@ static int vidioc_enum_input (struct file *file, void *priv, static int vidioc_g_input (struct file *file, void *priv, unsigned int *input) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); *input = usbvision->ctl_input; return 0; @@ -613,9 +598,7 @@ static int vidioc_g_input (struct file *file, void *priv, unsigned int *input) static int vidioc_s_input (struct file *file, void *priv, unsigned int input) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); if ((input >= usbvision->video_inputs) || (input < 0) ) return -EINVAL; @@ -632,9 +615,8 @@ static int vidioc_s_input (struct file *file, void *priv, unsigned int input) static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); + usbvision->tvnormId=*id; mutex_lock(&usbvision->lock); @@ -650,9 +632,7 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id) static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *vt) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); if (!usbvision->have_tuner || vt->index) // Only tuner 0 return -EINVAL; @@ -671,9 +651,7 @@ static int vidioc_g_tuner (struct file *file, void *priv, static int vidioc_s_tuner (struct file *file, void *priv, struct v4l2_tuner *vt) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); // Only no or one tuner for now if (!usbvision->have_tuner || vt->index) @@ -687,9 +665,7 @@ static int vidioc_s_tuner (struct file *file, void *priv, static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *freq) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); freq->tuner = 0; // Only one tuner if(usbvision->radio) { @@ -705,9 +681,7 @@ static int vidioc_g_frequency (struct file *file, void *priv, static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *freq) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); // Only no or one tuner for now if (!usbvision->have_tuner || freq->tuner) @@ -721,9 +695,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, static int vidioc_g_audio (struct file *file, void *priv, struct v4l2_audio *a) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); memset(a,0,sizeof(*a)); if(usbvision->radio) { @@ -748,9 +720,7 @@ static int vidioc_s_audio (struct file *file, void *fh, static int vidioc_queryctrl (struct file *file, void *priv, struct v4l2_queryctrl *ctrl) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int id=ctrl->id; memset(ctrl,0,sizeof(*ctrl)); @@ -767,9 +737,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl); return 0; @@ -778,9 +746,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl); return 0; @@ -789,9 +755,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv, static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *vr) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int ret; RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES); @@ -819,9 +783,7 @@ static int vidioc_reqbufs (struct file *file, static int vidioc_querybuf (struct file *file, void *priv, struct v4l2_buffer *vb) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); struct usbvision_frame *frame; /* FIXME : must control @@ -857,9 +819,7 @@ static int vidioc_querybuf (struct file *file, static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); struct usbvision_frame *frame; unsigned long lock_flags; @@ -896,9 +856,7 @@ static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb) static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int ret; struct usbvision_frame *f; unsigned long lock_flags; @@ -939,9 +897,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb) static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; usbvision->streaming = Stream_On; @@ -953,9 +909,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) @@ -988,9 +942,7 @@ static int vidioc_enum_fmt_vid_cap (struct file *file, void *priv, static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, struct v4l2_format *vf) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); vf->fmt.pix.width = usbvision->curwidth; vf->fmt.pix.height = usbvision->curheight; vf->fmt.pix.pixelformat = usbvision->palette.format; @@ -1006,9 +958,7 @@ static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, struct v4l2_format *vf) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int formatIdx; /* Find requested format in available ones */ @@ -1036,9 +986,7 @@ static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *vf) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int ret; if( 0 != (ret=vidioc_try_fmt_vid_cap (file, priv, vf)) ) { @@ -1066,9 +1014,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int noblock = file->f_flags & O_NONBLOCK; unsigned long lock_flags; @@ -1177,10 +1123,7 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) start = vma->vm_start; void *pos; u32 i; - - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); PDEBUG(DBG_MMAP, "mmap"); @@ -1237,9 +1180,7 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) */ static int usbvision_radio_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode = 0; PDEBUG(DBG_IO, "%s:", __func__); @@ -1289,9 +1230,7 @@ out: static int usbvision_radio_close(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode = 0; PDEBUG(DBG_IO, ""); diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index feab12aa2c7..f16aafe9cf1 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -83,6 +83,22 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .index = 7, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, .index = 8, .size = 2, @@ -114,6 +130,60 @@ static struct uvc_control_info uvc_ctrls[] = { | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, }, { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .index = 12, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .index = 13, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_DIGITAL_MULTIPLIER_CONTROL, + .index = 14, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL, + .index = 15, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_ANALOG_VIDEO_STANDARD_CONTROL, + .index = 16, + .size = 1, + .flags = UVC_CONTROL_GET_CUR, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_ANALOG_LOCK_STATUS_CONTROL, + .index = 17, + .size = 1, + .flags = UVC_CONTROL_GET_CUR, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_SCANNING_MODE_CONTROL, + .index = 0, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { .entity = UVC_GUID_UVC_CAMERA, .selector = CT_AE_MODE_CONTROL, .index = 1, @@ -140,6 +210,14 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_RELATIVE_CONTROL, + .index = 4, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, .selector = CT_FOCUS_ABSOLUTE_CONTROL, .index = 5, .size = 2, @@ -148,42 +226,90 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_AUTO_CONTROL, - .index = 17, - .size = 1, - .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR - | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + .selector = CT_FOCUS_RELATIVE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, - .index = 12, + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_IRIS_ABSOLUTE_CONTROL, + .index = 7, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_IRIS_RELATIVE_CONTROL, + .index = 8, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR - | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + | UVC_CONTROL_AUTO_UPDATE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, - .index = 6, + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ZOOM_ABSOLUTE_CONTROL, + .index = 9, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ZOOM_RELATIVE_CONTROL, + .index = 10, + .size = 3, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_PANTILT_ABSOLUTE_CONTROL, + .index = 11, + .size = 8, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_PANTILT_RELATIVE_CONTROL, + .index = 12, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ROLL_ABSOLUTE_CONTROL, .index = 13, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ROLL_RELATIVE_CONTROL, + .index = 14, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .index = 17, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, - .index = 7, - .size = 4, - .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_PRIVACY_CONTROL, + .index = 18, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, }, }; @@ -711,7 +837,17 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev, for (i = 0; i < entity->ncontrols; ++i) { ctrl = &entity->controls[i]; - if (ctrl->info == NULL || !ctrl->dirty) + if (ctrl->info == NULL) + continue; + + /* Reset the loaded flag for auto-update controls that were + * marked as loaded in uvc_ctrl_get/uvc_ctrl_set to prevent + * uvc_ctrl_get from using the cached value. + */ + if (ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) + ctrl->loaded = 0; + + if (!ctrl->dirty) continue; if (!rollback) @@ -727,9 +863,6 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev, uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), ctrl->info->size); - if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) - ctrl->loaded = 0; - ctrl->dirty = 0; if (ret < 0) @@ -787,8 +920,7 @@ int uvc_ctrl_get(struct uvc_video_device *video, if (ret < 0) return ret; - if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) - ctrl->loaded = 1; + ctrl->loaded = 1; } xctrl->value = uvc_get_le_value( @@ -839,8 +971,7 @@ int uvc_ctrl_set(struct uvc_video_device *video, return ret; } - if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) - ctrl->loaded = 1; + ctrl->loaded = 1; } if (!ctrl->dirty) { diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 7e102034d38..d7ad060640b 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1663,7 +1663,7 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) return uvc_video_suspend(&dev->video); } -static int uvc_resume(struct usb_interface *intf) +static int __uvc_resume(struct usb_interface *intf, int reset) { struct uvc_device *dev = usb_get_intfdata(intf); int ret; @@ -1672,7 +1672,7 @@ static int uvc_resume(struct usb_interface *intf) intf->cur_altsetting->desc.bInterfaceNumber); if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { - if ((ret = uvc_ctrl_resume_device(dev)) < 0) + if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0) return ret; return uvc_status_resume(dev); @@ -1687,6 +1687,16 @@ static int uvc_resume(struct usb_interface *intf) return uvc_video_resume(&dev->video); } +static int uvc_resume(struct usb_interface *intf) +{ + return __uvc_resume(intf, 0); +} + +static int uvc_reset_resume(struct usb_interface *intf) +{ + return __uvc_resume(intf, 1); +} + /* ------------------------------------------------------------------------ * Driver initialization and cleanup */ @@ -1902,6 +1912,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Compaq Presario B1200 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0104, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer Travelmate 7720 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0105, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Medion Akoya Mini E1210 - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, @@ -1920,6 +1948,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Fujitsu Amilo SI2636 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0202, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Advent 4211 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0203, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, @@ -1952,6 +1998,7 @@ struct uvc_driver uvc_driver = { .disconnect = uvc_disconnect, .suspend = uvc_suspend, .resume = uvc_resume, + .reset_resume = uvc_reset_resume, .id_table = uvc_ids, .supports_autosuspend = 1, }, diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index 75e678ac54e..5d60b264d59 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -177,9 +177,15 @@ int uvc_status_init(struct uvc_device *dev) uvc_input_init(dev); + dev->status = kzalloc(UVC_MAX_STATUS_SIZE, GFP_KERNEL); + if (dev->status == NULL) + return -ENOMEM; + dev->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (dev->int_urb == NULL) + if (dev->int_urb == NULL) { + kfree(dev->status); return -ENOMEM; + } pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); @@ -192,7 +198,7 @@ int uvc_status_init(struct uvc_device *dev) interval = fls(interval) - 1; usb_fill_int_urb(dev->int_urb, dev->udev, pipe, - dev->status, sizeof dev->status, uvc_status_complete, + dev->status, UVC_MAX_STATUS_SIZE, uvc_status_complete, dev, interval); return usb_submit_urb(dev->int_urb, GFP_KERNEL); @@ -202,6 +208,7 @@ void uvc_status_cleanup(struct uvc_device *dev) { usb_kill_urb(dev->int_urb); usb_free_urb(dev->int_urb); + kfree(dev->status); uvc_input_cleanup(dev); } diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index d7bd71be40a..78e4c4e09d8 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -400,15 +400,13 @@ static int uvc_has_privileges(struct uvc_fh *handle) static int uvc_v4l2_open(struct inode *inode, struct file *file) { - struct video_device *vdev; struct uvc_video_device *video; struct uvc_fh *handle; int ret = 0; uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n"); mutex_lock(&uvc_driver.open_mutex); - vdev = video_devdata(file); - video = video_get_drvdata(vdev); + video = video_drvdata(file); if (video->dev->state & UVC_DEV_DISCONNECTED) { ret = -ENODEV; @@ -440,8 +438,7 @@ done: static int uvc_v4l2_release(struct inode *inode, struct file *file) { - struct video_device *vdev = video_devdata(file); - struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_video_device *video = video_drvdata(file); struct uvc_fh *handle = (struct uvc_fh *)file->private_data; uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); @@ -845,10 +842,6 @@ static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, if (ret < 0) return ret; - if (!(video->streaming->cur_format->flags & - UVC_FMT_FLAG_COMPRESSED)) - video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; - rb->count = ret; ret = 0; break; @@ -1031,8 +1024,7 @@ static struct vm_operations_struct uvc_vm_ops = { static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) { - struct video_device *vdev = video_devdata(file); - struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_video_device *video = video_drvdata(file); struct uvc_buffer *uninitialized_var(buffer); struct page *page; unsigned long addr, start, size; @@ -1085,8 +1077,7 @@ done: static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) { - struct video_device *vdev = video_devdata(file); - struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_video_device *video = video_drvdata(file); uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 6854ac78a16..b7bb23820d8 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -455,7 +455,8 @@ static void uvc_video_decode_isoc(struct urb *urb, urb->iso_frame_desc[i].actual_length - ret); /* Process the header again. */ - uvc_video_decode_end(video, buf, mem, ret); + uvc_video_decode_end(video, buf, mem, + urb->iso_frame_desc[i].actual_length); if (buf->state == UVC_BUF_STATE_DONE || buf->state == UVC_BUF_STATE_ERROR) @@ -512,7 +513,7 @@ static void uvc_video_decode_bulk(struct urb *urb, video->bulk.payload_size >= video->bulk.max_payload_size) { if (!video->bulk.skip_payload && buf != NULL) { uvc_video_decode_end(video, buf, video->bulk.header, - video->bulk.header_size); + video->bulk.payload_size); if (buf->state == UVC_BUF_STATE_DONE || buf->state == UVC_BUF_STATE_ERROR) buf = uvc_queue_next_buffer(&video->queue, buf); @@ -655,7 +656,7 @@ static int uvc_init_video_isoc(struct uvc_video_device *video, if (size > UVC_MAX_FRAME_SIZE) return -EINVAL; - npackets = (size + psize - 1) / psize; + npackets = DIV_ROUND_UP(size, psize); if (npackets > UVC_MAX_ISO_PACKETS) npackets = UVC_MAX_ISO_PACKETS; @@ -970,6 +971,11 @@ int uvc_video_enable(struct uvc_video_device *video, int enable) return 0; } + if (video->streaming->cur_format->flags & UVC_FMT_FLAG_COMPRESSED) + video->queue.flags &= ~UVC_QUEUE_DROP_INCOMPLETE; + else + video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; + if ((ret = uvc_queue_enable(&video->queue, 1)) < 0) return ret; diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bafe3406e30..9a6bc1aafb1 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -303,6 +303,8 @@ struct uvc_xu_control { #define UVC_MAX_FRAME_SIZE (16*1024*1024) /* Maximum number of video buffers. */ #define UVC_MAX_VIDEO_BUFFERS 32 +/* Maximum status buffer size in bytes of interrupt URB. */ +#define UVC_MAX_STATUS_SIZE 16 #define UVC_CTRL_CONTROL_TIMEOUT 300 #define UVC_CTRL_STREAMING_TIMEOUT 1000 @@ -634,7 +636,7 @@ struct uvc_device { /* Status Interrupt Endpoint */ struct usb_host_endpoint *int_ep; struct urb *int_urb; - __u8 status[16]; + __u8 *status; struct input_dev *input; /* Video Streaming interfaces */ diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index 79937d1031f..928cb403737 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -36,10 +36,6 @@ #include <asm/system.h> #include <asm/pgtable.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable debug messages"); diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 88ca1310441..846763d7349 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -60,10 +60,6 @@ #include <media/v4l2-common.h> #include <media/v4l2-chip-ident.h> -#ifdef CONFIG_KMOD -#include <linux/kmod.h> -#endif - #include <linux/videodev2.h> MODULE_AUTHOR("Bill Dirks, Justin Schoeman, Gerd Knorr"); @@ -187,9 +183,11 @@ const char **v4l2_ctrl_get_menu(u32 id) NULL }; static const char *mpeg_audio_encoding[] = { - "Layer I", - "Layer II", - "Layer III", + "MPEG-1/2 Layer I", + "MPEG-1/2 Layer II", + "MPEG-1/2 Layer III", + "MPEG-2/4 AAC", + "AC-3", NULL }; static const char *mpeg_audio_l1_bitrate[] = { @@ -243,6 +241,28 @@ const char **v4l2_ctrl_get_menu(u32 id) "320 kbps", NULL }; + static const char *mpeg_audio_ac3_bitrate[] = { + "32 kbps", + "40 kbps", + "48 kbps", + "56 kbps", + "64 kbps", + "80 kbps", + "96 kbps", + "112 kbps", + "128 kbps", + "160 kbps", + "192 kbps", + "224 kbps", + "256 kbps", + "320 kbps", + "384 kbps", + "448 kbps", + "512 kbps", + "576 kbps", + "640 kbps", + NULL + }; static const char *mpeg_audio_mode[] = { "Stereo", "Joint Stereo", @@ -271,6 +291,7 @@ const char **v4l2_ctrl_get_menu(u32 id) static const char *mpeg_video_encoding[] = { "MPEG-1", "MPEG-2", + "MPEG-4 AVC", NULL }; static const char *mpeg_video_aspect[] = { @@ -311,6 +332,8 @@ const char **v4l2_ctrl_get_menu(u32 id) return mpeg_audio_l2_bitrate; case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return mpeg_audio_l3_bitrate; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + return mpeg_audio_ac3_bitrate; case V4L2_CID_MPEG_AUDIO_MODE: return mpeg_audio_mode; case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: @@ -335,62 +358,73 @@ const char **v4l2_ctrl_get_menu(u32 id) } EXPORT_SYMBOL(v4l2_ctrl_get_menu); -/* Fill in a struct v4l2_queryctrl */ -int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def) +/* Return the control name. */ +const char *v4l2_ctrl_get_name(u32 id) { - const char *name; - - qctrl->flags = 0; - switch (qctrl->id) { + switch (id) { /* USER controls */ - case V4L2_CID_USER_CLASS: name = "User Controls"; break; - case V4L2_CID_AUDIO_VOLUME: name = "Volume"; break; - case V4L2_CID_AUDIO_MUTE: name = "Mute"; break; - case V4L2_CID_AUDIO_BALANCE: name = "Balance"; break; - case V4L2_CID_AUDIO_BASS: name = "Bass"; break; - case V4L2_CID_AUDIO_TREBLE: name = "Treble"; break; - case V4L2_CID_AUDIO_LOUDNESS: name = "Loudness"; break; - case V4L2_CID_BRIGHTNESS: name = "Brightness"; break; - case V4L2_CID_CONTRAST: name = "Contrast"; break; - case V4L2_CID_SATURATION: name = "Saturation"; break; - case V4L2_CID_HUE: name = "Hue"; break; + case V4L2_CID_USER_CLASS: return "User Controls"; + case V4L2_CID_AUDIO_VOLUME: return "Volume"; + case V4L2_CID_AUDIO_MUTE: return "Mute"; + case V4L2_CID_AUDIO_BALANCE: return "Balance"; + case V4L2_CID_AUDIO_BASS: return "Bass"; + case V4L2_CID_AUDIO_TREBLE: return "Treble"; + case V4L2_CID_AUDIO_LOUDNESS: return "Loudness"; + case V4L2_CID_BRIGHTNESS: return "Brightness"; + case V4L2_CID_CONTRAST: return "Contrast"; + case V4L2_CID_SATURATION: return "Saturation"; + case V4L2_CID_HUE: return "Hue"; /* MPEG controls */ - case V4L2_CID_MPEG_CLASS: name = "MPEG Encoder Controls"; break; - case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: name = "Audio Sampling Frequency"; break; - case V4L2_CID_MPEG_AUDIO_ENCODING: name = "Audio Encoding Layer"; break; - case V4L2_CID_MPEG_AUDIO_L1_BITRATE: name = "Audio Layer I Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_L2_BITRATE: name = "Audio Layer II Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_L3_BITRATE: name = "Audio Layer III Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_MODE: name = "Audio Stereo Mode"; break; - case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: name = "Audio Stereo Mode Extension"; break; - case V4L2_CID_MPEG_AUDIO_EMPHASIS: name = "Audio Emphasis"; break; - case V4L2_CID_MPEG_AUDIO_CRC: name = "Audio CRC"; break; - case V4L2_CID_MPEG_AUDIO_MUTE: name = "Audio Mute"; break; - case V4L2_CID_MPEG_VIDEO_ENCODING: name = "Video Encoding"; break; - case V4L2_CID_MPEG_VIDEO_ASPECT: name = "Video Aspect"; break; - case V4L2_CID_MPEG_VIDEO_B_FRAMES: name = "Video B Frames"; break; - case V4L2_CID_MPEG_VIDEO_GOP_SIZE: name = "Video GOP Size"; break; - case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: name = "Video GOP Closure"; break; - case V4L2_CID_MPEG_VIDEO_PULLDOWN: name = "Video Pulldown"; break; - case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: name = "Video Bitrate Mode"; break; - case V4L2_CID_MPEG_VIDEO_BITRATE: name = "Video Bitrate"; break; - case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: name = "Video Peak Bitrate"; break; - case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: name = "Video Temporal Decimation"; break; - case V4L2_CID_MPEG_VIDEO_MUTE: name = "Video Mute"; break; - case V4L2_CID_MPEG_VIDEO_MUTE_YUV: name = "Video Mute YUV"; break; - case V4L2_CID_MPEG_STREAM_TYPE: name = "Stream Type"; break; - case V4L2_CID_MPEG_STREAM_PID_PMT: name = "Stream PMT Program ID"; break; - case V4L2_CID_MPEG_STREAM_PID_AUDIO: name = "Stream Audio Program ID"; break; - case V4L2_CID_MPEG_STREAM_PID_VIDEO: name = "Stream Video Program ID"; break; - case V4L2_CID_MPEG_STREAM_PID_PCR: name = "Stream PCR Program ID"; break; - case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: name = "Stream PES Audio ID"; break; - case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: name = "Stream PES Video ID"; break; - case V4L2_CID_MPEG_STREAM_VBI_FMT: name = "Stream VBI Format"; break; + case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls"; + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency"; + case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding"; + case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate"; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate"; + case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate"; + case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate"; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate"; + case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode"; + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension"; + case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis"; + case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC"; + case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute"; + case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding"; + case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect"; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames"; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size"; + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure"; + case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown"; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode"; + case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate"; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate"; + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation"; + case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute"; + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV"; + case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type"; + case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID"; + case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID"; + case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID"; + case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID"; + case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID"; + case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID"; + case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format"; default: - return -EINVAL; + return NULL; } +} +EXPORT_SYMBOL(v4l2_ctrl_get_name); + +/* Fill in a struct v4l2_queryctrl */ +int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def) +{ + const char *name = v4l2_ctrl_get_name(qctrl->id); + + qctrl->flags = 0; + if (name == NULL) + return -EINVAL; + switch (qctrl->id) { case V4L2_CID_AUDIO_MUTE: case V4L2_CID_AUDIO_LOUDNESS: @@ -407,6 +441,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste case V4L2_CID_MPEG_AUDIO_L1_BITRATE: case V4L2_CID_MPEG_AUDIO_L2_BITRATE: case V4L2_CID_MPEG_AUDIO_L3_BITRATE: + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: case V4L2_CID_MPEG_AUDIO_MODE: case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: case V4L2_CID_MPEG_AUDIO_EMPHASIS: @@ -493,7 +528,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_ENCODING_LAYER_1, - V4L2_MPEG_AUDIO_ENCODING_LAYER_3, 1, + V4L2_MPEG_AUDIO_ENCODING_AC3, 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2); case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return v4l2_ctrl_query_fill(qctrl, @@ -510,6 +545,13 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) V4L2_MPEG_AUDIO_L3_BITRATE_32K, V4L2_MPEG_AUDIO_L3_BITRATE_320K, 1, V4L2_MPEG_AUDIO_L3_BITRATE_192K); + case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: + return v4l2_ctrl_query_fill(qctrl, 0, 6400, 1, 3200000); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_32K, + V4L2_MPEG_AUDIO_AC3_BITRATE_640K, 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K); case V4L2_CID_MPEG_AUDIO_MODE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_MODE_STEREO, @@ -535,7 +577,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) case V4L2_CID_MPEG_VIDEO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_VIDEO_ENCODING_MPEG_1, - V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC, 1, V4L2_MPEG_VIDEO_ENCODING_MPEG_2); case V4L2_CID_MPEG_VIDEO_ASPECT: return v4l2_ctrl_query_fill(qctrl, @@ -594,12 +636,17 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) EXPORT_SYMBOL(v4l2_ctrl_query_fill_std); /* Fill in a struct v4l2_querymenu based on the struct v4l2_queryctrl and - the menu. The qctrl pointer may be NULL, in which case it is ignored. */ + the menu. The qctrl pointer may be NULL, in which case it is ignored. + If menu_items is NULL, then the menu items are retrieved using + v4l2_ctrl_get_menu. */ int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl, const char **menu_items) { int i; + qmenu->reserved = 0; + if (menu_items == NULL) + menu_items = v4l2_ctrl_get_menu(qmenu->id); if (menu_items == NULL || (qctrl && (qmenu->index < qctrl->minimum || qmenu->index > qctrl->maximum))) return -EINVAL; @@ -607,11 +654,31 @@ int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qc if (menu_items[i] == NULL || menu_items[i][0] == '\0') return -EINVAL; snprintf(qmenu->name, sizeof(qmenu->name), menu_items[qmenu->index]); - qmenu->reserved = 0; return 0; } EXPORT_SYMBOL(v4l2_ctrl_query_menu); +/* Fill in a struct v4l2_querymenu based on the specified array of valid + menu items (terminated by V4L2_CTRL_MENU_IDS_END). + Use this if there are 'holes' in the list of valid menu items. */ +int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids) +{ + const char **menu_items = v4l2_ctrl_get_menu(qmenu->id); + + qmenu->reserved = 0; + if (menu_items == NULL || ids == NULL) + return -EINVAL; + while (*ids != V4L2_CTRL_MENU_IDS_END) { + if (*ids++ == qmenu->index) { + snprintf(qmenu->name, sizeof(qmenu->name), + menu_items[qmenu->index]); + return 0; + } + } + return -EINVAL; +} +EXPORT_SYMBOL(v4l2_ctrl_query_menu_valid_items); + /* ctrl_classes points to an array of u32 pointers, the last element is a NULL pointer. Each u32 array is a 0-terminated array of control IDs. Each array must be sorted low to high and belong to the same control diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 155fdec9ac7..ccd6566a515 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -42,6 +42,7 @@ static ssize_t show_index(struct device *cd, struct device_attribute *attr, char *buf) { struct video_device *vfd = container_of(cd, struct video_device, dev); + return sprintf(buf, "%i\n", vfd->index); } @@ -49,6 +50,7 @@ static ssize_t show_name(struct device *cd, struct device_attribute *attr, char *buf) { struct video_device *vfd = container_of(cd, struct video_device, dev); + return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name); } @@ -58,12 +60,16 @@ static struct device_attribute video_device_attrs[] = { __ATTR_NULL }; +/* + * Active devices + */ +static struct video_device *video_device[VIDEO_NUM_DEVICES]; +static DEFINE_MUTEX(videodev_lock); +static DECLARE_BITMAP(video_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES); + struct video_device *video_device_alloc(void) { - struct video_device *vfd; - - vfd = kzalloc(sizeof(*vfd), GFP_KERNEL); - return vfd; + return kzalloc(sizeof(struct video_device), GFP_KERNEL); } EXPORT_SYMBOL(video_device_alloc); @@ -73,16 +79,52 @@ void video_device_release(struct video_device *vfd) } EXPORT_SYMBOL(video_device_release); +void video_device_release_empty(struct video_device *vfd) +{ + /* Do nothing */ + /* Only valid when the video_device struct is a static. */ +} +EXPORT_SYMBOL(video_device_release_empty); + +/* Called when the last user of the character device is gone. */ +static void v4l2_chardev_release(struct kobject *kobj) +{ + struct video_device *vfd = container_of(kobj, struct video_device, cdev.kobj); + + mutex_lock(&videodev_lock); + if (video_device[vfd->minor] != vfd) { + mutex_unlock(&videodev_lock); + BUG(); + return; + } + + /* Free up this device for reuse */ + video_device[vfd->minor] = NULL; + clear_bit(vfd->num, video_nums[vfd->vfl_type]); + mutex_unlock(&videodev_lock); + + /* Release the character device */ + vfd->cdev_release(kobj); + /* Release video_device and perform other + cleanups as needed. */ + if (vfd->release) + vfd->release(vfd); +} + +/* The new kobj_type for the character device */ +static struct kobj_type v4l2_ktype_cdev_default = { + .release = v4l2_chardev_release, +}; + static void video_release(struct device *cd) { struct video_device *vfd = container_of(cd, struct video_device, dev); -#if 1 - /* needed until all drivers are fixed */ - if (!vfd->release) - return; -#endif - vfd->release(vfd); + /* It's now safe to delete the char device. + This will either trigger the v4l2_chardev_release immediately (if + the refcount goes to 0) or later when the last user of the + character device closes it. */ + cdev_del(&vfd->cdev); } static struct class video_class = { @@ -91,87 +133,12 @@ static struct class video_class = { .dev_release = video_release, }; -/* - * Active devices - */ - -static struct video_device *video_device[VIDEO_NUM_DEVICES]; -static DEFINE_MUTEX(videodev_lock); - struct video_device *video_devdata(struct file *file) { return video_device[iminor(file->f_path.dentry->d_inode)]; } EXPORT_SYMBOL(video_devdata); -/* - * Open a video device - FIXME: Obsoleted - */ -static int video_open(struct inode *inode, struct file *file) -{ - unsigned int minor = iminor(inode); - int err = 0; - struct video_device *vfl; - const struct file_operations *old_fops; - - if (minor >= VIDEO_NUM_DEVICES) - return -ENODEV; - lock_kernel(); - mutex_lock(&videodev_lock); - vfl = video_device[minor]; - if (vfl == NULL) { - mutex_unlock(&videodev_lock); - request_module("char-major-%d-%d", VIDEO_MAJOR, minor); - mutex_lock(&videodev_lock); - vfl = video_device[minor]; - if (vfl == NULL) { - mutex_unlock(&videodev_lock); - unlock_kernel(); - return -ENODEV; - } - } - old_fops = file->f_op; - file->f_op = fops_get(vfl->fops); - if (file->f_op->open) - err = file->f_op->open(inode, file); - if (err) { - fops_put(file->f_op); - file->f_op = fops_get(old_fops); - } - fops_put(old_fops); - mutex_unlock(&videodev_lock); - unlock_kernel(); - return err; -} - -/* - * open/release helper functions -- handle exclusive opens - * Should be removed soon - */ -int video_exclusive_open(struct inode *inode, struct file *file) -{ - struct video_device *vfl = video_devdata(file); - int retval = 0; - - mutex_lock(&vfl->lock); - if (vfl->users) - retval = -EBUSY; - else - vfl->users++; - mutex_unlock(&vfl->lock); - return retval; -} -EXPORT_SYMBOL(video_exclusive_open); - -int video_exclusive_release(struct inode *inode, struct file *file) -{ - struct video_device *vfl = video_devdata(file); - - vfl->users--; - return 0; -} -EXPORT_SYMBOL(video_exclusive_release); - /** * get_index - assign stream number based on parent device * @vdev: video_device to assign index number to, vdev->dev should be assigned @@ -252,33 +219,29 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, int index) { int i = 0; - int base; - int end; int ret; - char *name_base; + int minor_offset = 0; + int minor_cnt = VIDEO_NUM_DEVICES; + const char *name_base; + void *priv = video_get_drvdata(vfd); + + /* the release callback MUST be present */ + BUG_ON(!vfd->release); if (vfd == NULL) return -EINVAL; switch (type) { case VFL_TYPE_GRABBER: - base = MINOR_VFL_TYPE_GRABBER_MIN; - end = MINOR_VFL_TYPE_GRABBER_MAX+1; name_base = "video"; break; case VFL_TYPE_VTX: - base = MINOR_VFL_TYPE_VTX_MIN; - end = MINOR_VFL_TYPE_VTX_MAX+1; name_base = "vtx"; break; case VFL_TYPE_VBI: - base = MINOR_VFL_TYPE_VBI_MIN; - end = MINOR_VFL_TYPE_VBI_MAX+1; name_base = "vbi"; break; case VFL_TYPE_RADIO: - base = MINOR_VFL_TYPE_RADIO_MIN; - end = MINOR_VFL_TYPE_RADIO_MAX+1; name_base = "radio"; break; default: @@ -287,28 +250,70 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, return -EINVAL; } + vfd->vfl_type = type; + +#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES + /* Keep the ranges for the first four types for historical + * reasons. + * Newer devices (not yet in place) should use the range + * of 128-191 and just pick the first free minor there + * (new style). */ + switch (type) { + case VFL_TYPE_GRABBER: + minor_offset = 0; + minor_cnt = 64; + break; + case VFL_TYPE_RADIO: + minor_offset = 64; + minor_cnt = 64; + break; + case VFL_TYPE_VTX: + minor_offset = 192; + minor_cnt = 32; + break; + case VFL_TYPE_VBI: + minor_offset = 224; + minor_cnt = 32; + break; + default: + minor_offset = 128; + minor_cnt = 64; + break; + } +#endif + + /* Initialize the character device */ + cdev_init(&vfd->cdev, vfd->fops); + vfd->cdev.owner = vfd->fops->owner; /* pick a minor number */ mutex_lock(&videodev_lock); - if (nr >= 0 && nr < end-base) { - /* use the one the driver asked for */ - i = base + nr; - if (NULL != video_device[i]) { - mutex_unlock(&videodev_lock); - return -ENFILE; - } - } else { - /* use first free */ - for (i = base; i < end; i++) - if (NULL == video_device[i]) - break; - if (i == end) { - mutex_unlock(&videodev_lock); - return -ENFILE; - } + nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr); + if (nr == minor_cnt) + nr = find_first_zero_bit(video_nums[type], minor_cnt); + if (nr == minor_cnt) { + printk(KERN_ERR "could not get a free kernel number\n"); + mutex_unlock(&videodev_lock); + return -ENFILE; } - video_device[i] = vfd; - vfd->vfl_type = type; - vfd->minor = i; +#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES + /* 1-on-1 mapping of kernel number to minor number */ + i = nr; +#else + /* The kernel number and minor numbers are independent */ + for (i = 0; i < VIDEO_NUM_DEVICES; i++) + if (video_device[i] == NULL) + break; + if (i == VIDEO_NUM_DEVICES) { + mutex_unlock(&videodev_lock); + printk(KERN_ERR "could not get a free minor\n"); + return -ENFILE; + } +#endif + vfd->minor = i + minor_offset; + vfd->num = nr; + set_bit(nr, video_nums[type]); + BUG_ON(video_device[vfd->minor]); + video_device[vfd->minor] = vfd; ret = get_index(vfd, index); vfd->index = ret; @@ -320,35 +325,41 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, goto fail_minor; } - mutex_init(&vfd->lock); - + ret = cdev_add(&vfd->cdev, MKDEV(VIDEO_MAJOR, vfd->minor), 1); + if (ret < 0) { + printk(KERN_ERR "%s: cdev_add failed\n", __func__); + goto fail_minor; + } /* sysfs class */ - memset(&vfd->dev, 0x00, sizeof(vfd->dev)); + memset(&vfd->dev, 0, sizeof(vfd->dev)); + /* The memset above cleared the device's drvdata, so + put back the copy we made earlier. */ + video_set_drvdata(vfd, priv); vfd->dev.class = &video_class; vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor); if (vfd->parent) vfd->dev.parent = vfd->parent; - sprintf(vfd->dev.bus_id, "%s%d", name_base, i - base); + sprintf(vfd->dev.bus_id, "%s%d", name_base, nr); ret = device_register(&vfd->dev); if (ret < 0) { printk(KERN_ERR "%s: device_register failed\n", __func__); - goto fail_minor; + goto del_cdev; } - -#if 1 - /* needed until all drivers are fixed */ - if (!vfd->release) - printk(KERN_WARNING "videodev: \"%s\" has no release callback. " - "Please fix your driver for proper sysfs support, see " - "http://lwn.net/Articles/36850/\n", vfd->name); -#endif + /* Remember the cdev's release function */ + vfd->cdev_release = vfd->cdev.kobj.ktype->release; + /* Install our own */ + vfd->cdev.kobj.ktype = &v4l2_ktype_cdev_default; return 0; +del_cdev: + cdev_del(&vfd->cdev); + fail_minor: mutex_lock(&videodev_lock); video_device[vfd->minor] = NULL; - vfd->minor = -1; + clear_bit(vfd->num, video_nums[type]); mutex_unlock(&videodev_lock); + vfd->minor = -1; return ret; } EXPORT_SYMBOL(video_register_device_index); @@ -363,42 +374,29 @@ EXPORT_SYMBOL(video_register_device_index); void video_unregister_device(struct video_device *vfd) { - mutex_lock(&videodev_lock); - if (video_device[vfd->minor] != vfd) - panic("videodev: bad unregister"); - - video_device[vfd->minor] = NULL; device_unregister(&vfd->dev); - mutex_unlock(&videodev_lock); } EXPORT_SYMBOL(video_unregister_device); /* - * Video fs operations - */ -static const struct file_operations video_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .open = video_open, -}; - -/* * Initialise video for linux */ - static int __init videodev_init(void) { + dev_t dev = MKDEV(VIDEO_MAJOR, 0); int ret; printk(KERN_INFO "Linux video capture interface: v2.00\n"); - if (register_chrdev(VIDEO_MAJOR, VIDEO_NAME, &video_fops)) { - printk(KERN_WARNING "video_dev: unable to get major %d\n", VIDEO_MAJOR); - return -EIO; + ret = register_chrdev_region(dev, VIDEO_NUM_DEVICES, VIDEO_NAME); + if (ret < 0) { + printk(KERN_WARNING "videodev: unable to get major %d\n", + VIDEO_MAJOR); + return ret; } ret = class_register(&video_class); if (ret < 0) { - unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME); + unregister_chrdev_region(dev, VIDEO_NUM_DEVICES); printk(KERN_WARNING "video_dev: class_register failed\n"); return -EIO; } @@ -408,8 +406,10 @@ static int __init videodev_init(void) static void __exit videodev_exit(void) { + dev_t dev = MKDEV(VIDEO_MAJOR, 0); + class_unregister(&video_class); - unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME); + unregister_chrdev_region(dev, VIDEO_NUM_DEVICES); } module_init(videodev_init) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 140ef92c19c..155c9d77a46 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -746,18 +746,6 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret = ops->vidioc_enum_fmt_vid_overlay(file, fh, f); break; -#if 1 - /* V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT - * according to the spec. The bttv and saa7134 drivers support - * it though, so just warn that this is deprecated and will be - * removed in the near future. */ - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (ops->vidioc_enum_fmt_vbi_cap) { - printk(KERN_WARNING "vidioc_enum_fmt_vbi_cap will be removed in 2.6.28!\n"); - ret = ops->vidioc_enum_fmt_vbi_cap(file, fh, f); - } - break; -#endif case V4L2_BUF_TYPE_VIDEO_OUTPUT: if (ops->vidioc_enum_fmt_vid_out) ret = ops->vidioc_enum_fmt_vid_out(file, fh, f); diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c index b56cffcbfd4..917277d3660 100644 --- a/drivers/media/video/videobuf-dvb.c +++ b/drivers/media/video/videobuf-dvb.c @@ -126,7 +126,6 @@ static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed) mutex_lock(&dvb->lock); dvb->nfeeds--; if (0 == dvb->nfeeds && NULL != dvb->thread) { - // FIXME: cx8802_cancel_buffers(dev); err = kthread_stop(dvb->thread); dvb->thread = NULL; } @@ -134,30 +133,38 @@ static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed) return err; } -/* ------------------------------------------------------------------ */ - -int videobuf_dvb_register(struct videobuf_dvb *dvb, +static int videobuf_dvb_register_adapter(struct videobuf_dvb_frontends *fe, struct module *module, void *adapter_priv, struct device *device, - short *adapter_nr) + char *adapter_name, + short *adapter_nr, + int mfe_shared) { int result; - mutex_init(&dvb->lock); + mutex_init(&fe->lock); /* register adapter */ - result = dvb_register_adapter(&dvb->adapter, dvb->name, module, device, - adapter_nr); + result = dvb_register_adapter(&fe->adapter, adapter_name, module, + device, adapter_nr); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n", - dvb->name, result); - goto fail_adapter; + adapter_name, result); } - dvb->adapter.priv = adapter_priv; + fe->adapter.priv = adapter_priv; + fe->adapter.mfe_shared = mfe_shared; + + return result; +} + +static int videobuf_dvb_register_frontend(struct dvb_adapter *adapter, + struct videobuf_dvb *dvb) +{ + int result; /* register frontend */ - result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + result = dvb_register_frontend(adapter, dvb->frontend); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", dvb->name, result); @@ -183,7 +190,8 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, dvb->dmxdev.filternum = 256; dvb->dmxdev.demux = &dvb->demux.dmx; dvb->dmxdev.capabilities = 0; - result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + result = dvb_dmxdev_init(&dvb->dmxdev, adapter); + if (result < 0) { printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n", dvb->name, result); @@ -214,7 +222,11 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, } /* register network adapter */ - dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + dvb_net_init(adapter, &dvb->net, &dvb->demux.dmx); + if (dvb->net.dvbdev == NULL) { + result = -ENOMEM; + goto fail_fe_conn; + } return 0; fail_fe_conn: @@ -229,30 +241,151 @@ fail_dmx: dvb_unregister_frontend(dvb->frontend); fail_frontend: dvb_frontend_detach(dvb->frontend); - dvb_unregister_adapter(&dvb->adapter); -fail_adapter: + dvb->frontend = NULL; + return result; } -void videobuf_dvb_unregister(struct videobuf_dvb *dvb) +/* ------------------------------------------------------------------ */ +/* Register a single adapter and one or more frontends */ +int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, + struct module *module, + void *adapter_priv, + struct device *device, + short *adapter_nr, + int mfe_shared) { - dvb_net_release(&dvb->net); - dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); - dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); - dvb_dmxdev_release(&dvb->dmxdev); - dvb_dmx_release(&dvb->demux); - dvb_unregister_frontend(dvb->frontend); - dvb_frontend_detach(dvb->frontend); - dvb_unregister_adapter(&dvb->adapter); + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe; + int res; + + fe = videobuf_dvb_get_frontend(f, 1); + if (!fe) { + printk(KERN_WARNING "Unable to register the adapter which has no frontends\n"); + return -EINVAL; + } + + /* Bring up the adapter */ + res = videobuf_dvb_register_adapter(f, module, adapter_priv, device, + fe->dvb.name, adapter_nr, mfe_shared); + if (res < 0) { + printk(KERN_WARNING "videobuf_dvb_register_adapter failed (errno = %d)\n", res); + return res; + } + + /* Attach all of the frontends to the adapter */ + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + res = videobuf_dvb_register_frontend(&f->adapter, &fe->dvb); + if (res < 0) { + printk(KERN_WARNING "%s: videobuf_dvb_register_frontend failed (errno = %d)\n", + fe->dvb.name, res); + goto err; + } + } + mutex_unlock(&f->lock); + return 0; + +err: + mutex_unlock(&f->lock); + videobuf_dvb_unregister_bus(f); + return res; } +EXPORT_SYMBOL(videobuf_dvb_register_bus); -EXPORT_SYMBOL(videobuf_dvb_register); -EXPORT_SYMBOL(videobuf_dvb_unregister); +void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe; + + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->dvb.net.dvbdev) { + dvb_net_release(&fe->dvb.net); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_mem); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_hw); + dvb_dmxdev_release(&fe->dvb.dmxdev); + dvb_dmx_release(&fe->dvb.demux); + dvb_unregister_frontend(fe->dvb.frontend); + } + if (fe->dvb.frontend) + /* always allocated, may have been reset */ + dvb_frontend_detach(fe->dvb.frontend); + list_del(list); + kfree(fe); + } + mutex_unlock(&f->lock); -/* ------------------------------------------------------------------ */ -/* - * Local variables: - * c-basic-offset: 8 - * compile-command: "make DVB=1" - * End: - */ + dvb_unregister_adapter(&f->adapter); +} +EXPORT_SYMBOL(videobuf_dvb_unregister_bus); + +struct videobuf_dvb_frontend *videobuf_dvb_get_frontend( + struct videobuf_dvb_frontends *f, int id) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe, *ret = NULL; + + mutex_lock(&f->lock); + + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->id == id) { + ret = fe; + break; + } + } + + mutex_unlock(&f->lock); + + return ret; +} +EXPORT_SYMBOL(videobuf_dvb_get_frontend); + +int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, + struct dvb_frontend *p) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe = NULL; + int ret = 0; + + mutex_lock(&f->lock); + + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->dvb.frontend == p) { + ret = fe->id; + break; + } + } + + mutex_unlock(&f->lock); + + return ret; +} +EXPORT_SYMBOL(videobuf_dvb_find_frontend); + +struct videobuf_dvb_frontend *videobuf_dvb_alloc_frontend( + struct videobuf_dvb_frontends *f, int id) +{ + struct videobuf_dvb_frontend *fe; + + fe = kzalloc(sizeof(struct videobuf_dvb_frontend), GFP_KERNEL); + if (fe == NULL) + goto fail_alloc; + + fe->id = id; + mutex_init(&fe->dvb.lock); + + mutex_lock(&f->lock); + list_add_tail(&fe->felist, &f->felist); + mutex_unlock(&f->lock); + +fail_alloc: + return fe; +} +EXPORT_SYMBOL(videobuf_dvb_alloc_frontend); diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 1edda456fc6..1efc5f3462c 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -30,16 +30,12 @@ #include <linux/mm.h> #include <linux/time.h> #include <linux/version.h> - -#ifdef CONFIG_KMOD #include <linux/kmod.h> -#endif #include <linux/i2c.h> #include <linux/i2c-algo-sgi.h> #include <linux/videodev2.h> -#include <media/v4l2-ioctl.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <linux/video_decoder.h> @@ -810,7 +806,7 @@ static void vino_free_buffer_with_count(struct vino_framebuffer *fb, dprintk("vino_free_buffer_with_count(): count = %d\n", count); for (i = 0; i < count; i++) { - ClearPageReserved(virt_to_page(fb->desc_table.virtual[i])); + ClearPageReserved(virt_to_page((void *)fb->desc_table.virtual[i])); dma_unmap_single(NULL, fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i], PAGE_SIZE, DMA_FROM_DEVICE); @@ -888,7 +884,7 @@ static int vino_allocate_buffer(struct vino_framebuffer *fb, dma_data_addr + VINO_PAGE_SIZE * j; } - SetPageReserved(virt_to_page(fb->desc_table.virtual[i])); + SetPageReserved(virt_to_page((void *)fb->desc_table.virtual[i])); } /* page_count needs to be set anyway, because the descriptor table has @@ -975,7 +971,7 @@ static int vino_prepare_user_buffer(struct vino_framebuffer *fb, dma_data_addr + VINO_PAGE_SIZE * j; } - SetPageReserved(virt_to_page(fb->desc_table.virtual[i])); + SetPageReserved(virt_to_page((void *)fb->desc_table.virtual[i])); } /* page_count needs to be set anyway, because the descriptor table has @@ -4025,8 +4021,7 @@ out: static int vino_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); int ret = 0; dprintk("open(): channel = %c\n", (vcs->channel == VINO_CHANNEL_A) ? 'A' : 'B'); @@ -4057,8 +4052,7 @@ static int vino_open(struct inode *inode, struct file *file) static int vino_close(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); dprintk("close():\n"); mutex_lock(&vcs->mutex); @@ -4101,8 +4095,7 @@ static struct vm_operations_struct vino_vm_ops = { static int vino_mmap(struct file *file, struct vm_area_struct *vma) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); unsigned long start = vma->vm_start; unsigned long size = vma->vm_end - vma->vm_start; @@ -4207,8 +4200,7 @@ out: static unsigned int vino_poll(struct file *file, poll_table *pt) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); unsigned int outgoing; unsigned int ret = 0; @@ -4248,8 +4240,7 @@ error: static int vino_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); #ifdef VINO_DEBUG switch (_IOC_TYPE(cmd)) { @@ -4356,8 +4347,7 @@ static int vino_do_ioctl(struct inode *inode, struct file *file, static int vino_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); int ret; if (mutex_lock_interruptible(&vcs->mutex)) @@ -4641,7 +4631,7 @@ static int __init vino_module_init(void) } vino_init_stage++; -#if defined(CONFIG_KMOD) && defined(MODULE) +#ifdef MODULE request_module("saa7191"); request_module("indycam"); #endif diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 8ba8daafd7e..7d7e51def46 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -128,12 +128,56 @@ struct vivi_fmt { int depth; }; -static struct vivi_fmt format = { - .name = "4:2:2, packed, YUYV", - .fourcc = V4L2_PIX_FMT_YUYV, - .depth = 16, +static struct vivi_fmt formats[] = { + { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + }, + { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + }, + { + .name = "RGB565 (LE)", + .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ + .depth = 16, + }, + { + .name = "RGB565 (BE)", + .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ + .depth = 16, + }, + { + .name = "RGB555 (LE)", + .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ + .depth = 16, + }, + { + .name = "RGB555 (BE)", + .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ + .depth = 16, + }, }; +static struct vivi_fmt *get_format(struct v4l2_format *f) +{ + struct vivi_fmt *fmt; + unsigned int k; + + for (k = 0; k < ARRAY_SIZE(formats); k++) { + fmt = &formats[k]; + if (fmt->fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == ARRAY_SIZE(formats)) + return NULL; + + return &formats[k]; +} + struct sg_to_addr { int pos; struct scatterlist *sg; @@ -190,6 +234,7 @@ struct vivi_fh { struct videobuf_queue vb_vidq; enum v4l2_buf_type type; + unsigned char bars[8][3]; }; /* ------------------------------------------------------------------ @@ -234,42 +279,118 @@ static u8 bars[8][3] = { #define TSTAMP_MAX_Y TSTAMP_MIN_Y+15 #define TSTAMP_MIN_X 64 -static void gen_line(char *basep, int inipos, int wmax, - int hmax, int line, int count, char *timestr) +static void gen_twopix(struct vivi_fh *fh, unsigned char *buf, int colorpos) { - int w, i, j, y; - int pos = inipos; - char *p, *s; - u8 chr, r, g, b, color; + unsigned char r_y, g_u, b_v; + unsigned char *p; + int color; - /* We will just duplicate the second pixel at the packet */ - wmax /= 2; + r_y = fh->bars[colorpos][0]; /* R or precalculated Y */ + g_u = fh->bars[colorpos][1]; /* G or precalculated U */ + b_v = fh->bars[colorpos][2]; /* B or precalculated V */ - /* Generate a standard color bar pattern */ - for (w = 0; w < wmax; w++) { - int colorpos = ((w + count) * 8/(wmax + 1)) % 8; - r = bars[colorpos][0]; - g = bars[colorpos][1]; - b = bars[colorpos][2]; - - for (color = 0; color < 4; color++) { - p = basep + pos; + for (color = 0; color < 4; color++) { + p = buf + color; + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + switch (color) { + case 0: + case 2: + *p = r_y; + break; + case 1: + *p = g_u; + break; + case 3: + *p = b_v; + break; + } + break; + case V4L2_PIX_FMT_UYVY: + switch (color) { + case 1: + case 3: + *p = r_y; + break; + case 0: + *p = g_u; + break; + case 2: + *p = b_v; + break; + } + break; + case V4L2_PIX_FMT_RGB565: + switch (color) { + case 0: + case 2: + *p = (g_u << 5) | b_v; + break; + case 1: + case 3: + *p = (r_y << 3) | (g_u >> 3); + break; + } + break; + case V4L2_PIX_FMT_RGB565X: switch (color) { case 0: case 2: - *p = TO_Y(r, g, b); /* Luma */ + *p = (r_y << 3) | (g_u >> 3); break; case 1: - *p = TO_U(r, g, b); /* Cb */ + case 3: + *p = (g_u << 5) | b_v; + break; + } + break; + case V4L2_PIX_FMT_RGB555: + switch (color) { + case 0: + case 2: + *p = (g_u << 5) | b_v; + break; + case 1: + case 3: + *p = (r_y << 2) | (g_u >> 3); + break; + } + break; + case V4L2_PIX_FMT_RGB555X: + switch (color) { + case 0: + case 2: + *p = (r_y << 2) | (g_u >> 3); break; + case 1: case 3: - *p = TO_V(r, g, b); /* Cr */ + *p = (g_u << 5) | b_v; break; } - pos++; + break; } } +} + +static void gen_line(struct vivi_fh *fh, char *basep, int inipos, int wmax, + int hmax, int line, int count, char *timestr) +{ + int w, i, j; + int pos = inipos; + char *s; + u8 chr; + + /* We will just duplicate the second pixel at the packet */ + wmax /= 2; + + /* Generate a standard color bar pattern */ + for (w = 0; w < wmax; w++) { + int colorpos = ((w + count) * 8/(wmax + 1)) % 8; + + gen_twopix(fh, basep + pos, colorpos); + pos += 4; /* only 16 bpp supported for now */ + } /* Checks if it is possible to show timestamp */ if (TSTAMP_MAX_Y >= hmax) @@ -283,38 +404,12 @@ static void gen_line(char *basep, int inipos, int wmax, for (s = timestr; *s; s++) { chr = rom8x16_bits[(*s-0x30)*16+line-TSTAMP_MIN_Y]; for (i = 0; i < 7; i++) { - if (chr & 1 << (7 - i)) { - /* Font color*/ - r = 0; - g = 198; - b = 0; - } else { - /* Background color */ - r = bars[BLACK][0]; - g = bars[BLACK][1]; - b = bars[BLACK][2]; - } - pos = inipos + j * 2; - for (color = 0; color < 4; color++) { - p = basep + pos; - - y = TO_Y(r, g, b); - - switch (color) { - case 0: - case 2: - *p = TO_Y(r, g, b); /* Luma */ - break; - case 1: - *p = TO_U(r, g, b); /* Cb */ - break; - case 3: - *p = TO_V(r, g, b); /* Cr */ - break; - } - pos++; - } + /* Draw white font on black background */ + if (chr & 1 << (7 - i)) + gen_twopix(fh, basep + pos, WHITE); + else + gen_twopix(fh, basep + pos, BLACK); j++; } } @@ -324,8 +419,9 @@ end: return; } -static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) +static void vivi_fillbuff(struct vivi_fh *fh, struct vivi_buffer *buf) { + struct vivi_dev *dev = fh->dev; int h , pos = 0; int hmax = buf->vb.height; int wmax = buf->vb.width; @@ -341,7 +437,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) return; for (h = 0; h < hmax; h++) { - gen_line(tmpbuf, 0, wmax, hmax, h, dev->mv_count, + gen_line(fh, tmpbuf, 0, wmax, hmax, h, dev->mv_count, dev->timestr); memcpy(vbuf + pos, tmpbuf, wmax * 2); pos += wmax*2; @@ -410,7 +506,7 @@ static void vivi_thread_tick(struct vivi_fh *fh) do_gettimeofday(&buf->vb.ts); /* Fill buffer */ - vivi_fillbuff(dev, buf); + vivi_fillbuff(fh, buf); dprintk(dev, 1, "filled buffer %p\n", buf); wake_up(&buf->vb.done); @@ -636,11 +732,15 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - if (f->index > 0) + struct vivi_fmt *fmt; + + if (f->index >= ARRAY_SIZE(formats)) return -EINVAL; - strlcpy(f->description, format.name, sizeof(f->description)); - f->pixelformat = format.fourcc; + fmt = &formats[f->index]; + + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; return 0; } @@ -670,13 +770,12 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, enum v4l2_field field; unsigned int maxw, maxh; - if (format.fourcc != f->fmt.pix.pixelformat) { - dprintk(dev, 1, "Fourcc format (0x%08x) invalid. " - "Driver accepts only 0x%08x\n", - f->fmt.pix.pixelformat, format.fourcc); + fmt = get_format(f); + if (!fmt) { + dprintk(dev, 1, "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); return -EINVAL; } - fmt = &format; field = f->fmt.pix.field; @@ -714,6 +813,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, { struct vivi_fh *fh = priv; struct videobuf_queue *q = &fh->vb_vidq; + unsigned char r, g, b; + int k, is_yuv; int ret = vidioc_try_fmt_vid_cap(file, fh, f); if (ret < 0) @@ -727,12 +828,49 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - fh->fmt = &format; + fh->fmt = get_format(f); fh->width = f->fmt.pix.width; fh->height = f->fmt.pix.height; fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; + /* precalculate color bar values to speed up rendering */ + for (k = 0; k < 8; k++) { + r = bars[k][0]; + g = bars[k][1]; + b = bars[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + ret = 0; out: mutex_unlock(&q->vb_lock); @@ -886,8 +1024,6 @@ static int vidioc_s_ctrl(struct file *file, void *priv, File operations for the device ------------------------------------------------------------------*/ -#define line_buf_size(norm) (norm_maxw(norm)*(format.depth+7)/8) - static int vivi_open(struct inode *inode, struct file *file) { int minor = iminor(inode); @@ -898,9 +1034,11 @@ static int vivi_open(struct inode *inode, struct file *file) printk(KERN_DEBUG "vivi: open called (minor=%d)\n", minor); + lock_kernel(); list_for_each_entry(dev, &vivi_devlist, vivi_devlist) if (dev->vfd->minor == minor) goto found; + unlock_kernel(); return -ENODEV; found: @@ -925,14 +1063,16 @@ found: } unlock: mutex_unlock(&dev->mutex); - if (retval) + if (retval) { + unlock_kernel(); return retval; + } file->private_data = fh; fh->dev = dev; fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - fh->fmt = &format; + fh->fmt = &formats[0]; fh->width = 640; fh->height = 480; @@ -955,6 +1095,7 @@ unlock: sizeof(struct vivi_buffer), fh); vivi_start_thread(fh); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 35293029da0..67aa0db4b81 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -22,34 +22,21 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/types.h> -#include <linux/slab.h> - -#include <linux/byteorder/swab.h> - -#include <asm/io.h> #include <asm/uaccess.h> - #include <linux/i2c.h> - -#define I2C_NAME(x) (x)->name - -#include <linux/videodev.h> #include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> +#include <linux/videodev.h> #include <linux/video_decoder.h> -#define I2C_VPX3220 0x86 -#define VPX3220_DEBUG KERN_DEBUG "vpx3220: " +MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); +MODULE_AUTHOR("Laurent Pinchart"); +MODULE_LICENSE("GPL"); static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - #define VPX_TIMEOUT_COUNT 10 /* ----------------------------------------------------------------------- */ @@ -69,10 +56,8 @@ struct vpx3220 { static char *inputs[] = { "internal", "composite", "svideo" }; /* ----------------------------------------------------------------------- */ -static inline int -vpx3220_write (struct i2c_client *client, - u8 reg, - u8 value) + +static inline int vpx3220_write(struct i2c_client *client, u8 reg, u8 value) { struct vpx3220 *decoder = i2c_get_clientdata(client); @@ -80,15 +65,12 @@ vpx3220_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -vpx3220_read (struct i2c_client *client, - u8 reg) +static inline int vpx3220_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -vpx3220_fp_status (struct i2c_client *client) +static int vpx3220_fp_status(struct i2c_client *client) { unsigned char status; unsigned int i; @@ -108,14 +90,11 @@ vpx3220_fp_status (struct i2c_client *client) return -1; } -static int -vpx3220_fp_write (struct i2c_client *client, - u8 fpaddr, - u16 data) +static int vpx3220_fp_write(struct i2c_client *client, u8 fpaddr, u16 data) { /* Write the 16-bit address to the FPWR register */ if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } @@ -124,22 +103,20 @@ vpx3220_fp_write (struct i2c_client *client, /* Write the 16-bit data to the FPDAT register */ if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } return 0; } -static u16 -vpx3220_fp_read (struct i2c_client *client, - u16 fpaddr) +static u16 vpx3220_fp_read(struct i2c_client *client, u16 fpaddr) { s16 data; /* Write the 16-bit address to the FPRD register */ if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } @@ -149,25 +126,22 @@ vpx3220_fp_read (struct i2c_client *client, /* Read the 16-bit data from the FPDAT register */ data = i2c_smbus_read_word_data(client, 0x28); if (data == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } return swab16(data); } -static int -vpx3220_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int vpx3220_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { u8 reg; int ret = -1; while (len >= 2) { reg = *data++; - if ((ret = - vpx3220_write(client, reg, *data++)) < 0) + ret = vpx3220_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -175,10 +149,8 @@ vpx3220_write_block (struct i2c_client *client, return ret; } -static int -vpx3220_write_fp_block (struct i2c_client *client, - const u16 *data, - unsigned int len) +static int vpx3220_write_fp_block(struct i2c_client *client, + const u16 *data, unsigned int len) { u8 reg; int ret = 0; @@ -287,25 +259,20 @@ static const unsigned short init_fp[] = { 0x4b, 0x298, /* PLL gain */ }; -static void -vpx3220_dump_i2c (struct i2c_client *client) +static void vpx3220_dump_i2c(struct i2c_client *client) { int len = sizeof(init_common); const unsigned char *data = init_common; while (len > 1) { - dprintk(1, - KERN_DEBUG "vpx3216b i2c reg 0x%02x data 0x%02x\n", + v4l_dbg(1, debug, client, "i2c reg 0x%02x data 0x%02x\n", *data, vpx3220_read(client, *data)); data += 2; len -= 2; } } -static int -vpx3220_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) { struct vpx3220 *decoder = i2c_get_clientdata(client); @@ -317,7 +284,6 @@ vpx3220_command (struct i2c_client *client, vpx3220_write_fp_block(client, init_fp, sizeof(init_fp) >> 1); switch (decoder->norm) { - case VIDEO_MODE_NTSC: vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); @@ -336,21 +302,20 @@ vpx3220_command (struct i2c_client *client, sizeof(init_pal) >> 1); break; } - } break; + } case DECODER_DUMP: { vpx3220_dump_i2c(client); - } break; + } case DECODER_GET_CAPABILITIES: { struct video_decoder_capability *cap = arg; - dprintk(1, KERN_DEBUG "%s: DECODER_GET_CAPABILITIES\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "DECODER_GET_CAPABILITIES\n"); cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC | @@ -359,20 +324,18 @@ vpx3220_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 3; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { int res = 0, status; - dprintk(1, KERN_INFO "%s: DECODER_GET_STATUS\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "DECODER_GET_STATUS\n"); status = vpx3220_fp_read(client, 0x0f3); - dprintk(1, KERN_INFO "%s: status: 0x%04x\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status: 0x%04x\n", status); if (status < 0) return status; @@ -381,7 +344,6 @@ vpx3220_command (struct i2c_client *client, res |= DECODER_STATUS_GOOD | DECODER_STATUS_COLOR; switch (status & 0x18) { - case 0x00: case 0x10: case 0x14: @@ -402,8 +364,8 @@ vpx3220_command (struct i2c_client *client, } *(int *) arg = res; - } break; + } case DECODER_SET_NORM: { @@ -415,50 +377,43 @@ vpx3220_command (struct i2c_client *client, choosen video norm */ temp_input = vpx3220_fp_read(client, 0xf2); - dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "DECODER_SET_NORM %d\n", *iarg); switch (*iarg) { - case VIDEO_MODE_NTSC: vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); - dprintk(1, KERN_INFO "%s: norm switched to NTSC\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to NTSC\n"); break; case VIDEO_MODE_PAL: vpx3220_write_fp_block(client, init_pal, sizeof(init_pal) >> 1); - dprintk(1, KERN_INFO "%s: norm switched to PAL\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to PAL\n"); break; case VIDEO_MODE_SECAM: vpx3220_write_fp_block(client, init_secam, sizeof(init_secam) >> 1); - dprintk(1, KERN_INFO "%s: norm switched to SECAM\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to SECAM\n"); break; case VIDEO_MODE_AUTO: /* FIXME This is only preliminary support */ data = vpx3220_fp_read(client, 0xf2) & 0x20; vpx3220_fp_write(client, 0xf2, 0x00c0 | data); - dprintk(1, KERN_INFO "%s: norm switched to Auto\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to AUTO\n"); break; default: return -EINVAL; - } decoder->norm = *iarg; /* And here we set the backed up video input again */ vpx3220_fp_write(client, 0xf2, temp_input | 0x0010); udelay(10); - } break; + } case DECODER_SET_INPUT: { @@ -477,8 +432,7 @@ vpx3220_command (struct i2c_client *client, if (*iarg < 0 || *iarg > 2) return -EINVAL; - dprintk(1, KERN_INFO "%s: input switched to %s\n", - I2C_NAME(client), inputs[*iarg]); + v4l_dbg(1, debug, client, "input switched to %s\n", inputs[*iarg]); vpx3220_write(client, 0x33, input[*iarg][0]); @@ -490,8 +444,8 @@ vpx3220_command (struct i2c_client *client, data | (input[*iarg][1] << 5) | 0x0010); udelay(10); - } break; + } case DECODER_SET_OUTPUT: { @@ -501,19 +455,18 @@ vpx3220_command (struct i2c_client *client, if (*iarg != 0) { return -EINVAL; } - } break; + } case DECODER_ENABLE_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_DEBUG "%s: DECODER_ENABLE_OUTPUT %d\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "DECODER_ENABLE_OUTPUT %d\n", *iarg); vpx3220_write(client, 0xf2, (*iarg ? 0x1b : 0x00)); - } break; + } case DECODER_SET_PICTURE: { @@ -544,8 +497,8 @@ vpx3220_command (struct i2c_client *client, vpx3220_fp_write(client, 0x1c, ((decoder->hue - 32768) >> 6) & 0xFFF); } - } break; + } default: return -EINVAL; @@ -554,8 +507,7 @@ vpx3220_command (struct i2c_client *client, return 0; } -static int -vpx3220_init_client (struct i2c_client *client) +static int vpx3220_init_client(struct i2c_client *client) { vpx3220_write_block(client, init_common, sizeof(init_common)); vpx3220_write_fp_block(client, init_fp, sizeof(init_fp) >> 1); @@ -569,115 +521,26 @@ vpx3220_init_client (struct i2c_client *client) * Client management code */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = - { I2C_VPX3220 >> 1, (I2C_VPX3220 >> 1) + 4, - I2C_CLIENT_END -}; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver vpx3220_i2c_driver; - -static int -vpx3220_detach_client (struct i2c_client *client) -{ - struct vpx3220 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); +static unsigned short normal_i2c[] = { 0x86 >> 1, 0x8e >> 1, I2C_CLIENT_END }; - return 0; -} +I2C_CLIENT_INSMOD; -static int -vpx3220_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int vpx3220_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int err; - struct i2c_client *client; struct vpx3220 *decoder; - - dprintk(1, VPX3220_DEBUG "%s\n", __func__); + const char *name = NULL; + u8 ver; + u16 pn; /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality - (adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - return 0; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) { - return -ENOMEM; - } - - client->addr = address; - client->adapter = adapter; - client->driver = &vpx3220_i2c_driver; - - /* Check for manufacture ID and part number */ - if (kind < 0) { - u8 id; - u16 pn; - - id = vpx3220_read(client, 0x00); - if (id != 0xec) { - dprintk(1, - KERN_INFO - "vpx3220_attach: Wrong manufacturer ID (0x%02x)\n", - id); - kfree(client); - return 0; - } - - pn = (vpx3220_read(client, 0x02) << 8) + - vpx3220_read(client, 0x01); - switch (pn) { - case 0x4680: - strlcpy(I2C_NAME(client), "vpx3220a", - sizeof(I2C_NAME(client))); - break; - case 0x4260: - strlcpy(I2C_NAME(client), "vpx3216b", - sizeof(I2C_NAME(client))); - break; - case 0x4280: - strlcpy(I2C_NAME(client), "vpx3214c", - sizeof(I2C_NAME(client))); - break; - default: - dprintk(1, - KERN_INFO - "%s: Wrong part number (0x%04x)\n", - __func__, pn); - kfree(client); - return 0; - } - } else { - strlcpy(I2C_NAME(client), "forced vpx32xx", - sizeof(I2C_NAME(client))); - } + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); + if (decoder == NULL) return -ENOMEM; - } decoder->norm = VIDEO_MODE_PAL; decoder->input = 0; decoder->enable = 1; @@ -687,63 +550,52 @@ vpx3220_detect_client (struct i2c_adapter *adapter, decoder->sat = 32768; i2c_set_clientdata(client, decoder); - err = i2c_attach_client(client); - if (err) { - kfree(client); - kfree(decoder); - return err; + ver = i2c_smbus_read_byte_data(client, 0x00); + pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) + + i2c_smbus_read_byte_data(client, 0x01); + if (ver == 0xec) { + switch (pn) { + case 0x4680: + name = "vpx3220a"; + break; + case 0x4260: + name = "vpx3216b"; + break; + case 0x4280: + name = "vpx3214c"; + break; + } } - - dprintk(1, KERN_INFO "%s: vpx32xx client found at address 0x%02x\n", - I2C_NAME(client), client->addr << 1); + if (name) + v4l_info(client, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); + else + v4l_info(client, "chip (%02x:%04x) found @ 0x%x (%s)\n", + ver, pn, client->addr << 1, client->adapter->name); vpx3220_init_client(client); - return 0; } -static int -vpx3220_attach_adapter (struct i2c_adapter *adapter) +static int vpx3220_remove(struct i2c_client *client) { - int ret; - - ret = i2c_probe(adapter, &addr_data, &vpx3220_detect_client); - dprintk(1, VPX3220_DEBUG "%s: i2c_probe returned %d\n", - __func__, ret); - return ret; + kfree(i2c_get_clientdata(client)); + return 0; } -/* ----------------------------------------------------------------------- - * Driver initialization and cleanup code - */ - -static struct i2c_driver vpx3220_i2c_driver = { - .driver = { - .name = "vpx3220", - }, - - .id = I2C_DRIVERID_VPX3220, +static const struct i2c_device_id vpx3220_id[] = { + { "vpx3220a", 0 }, + { "vpx3216b", 0 }, + { "vpx3214c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vpx3220_id); - .attach_adapter = vpx3220_attach_adapter, - .detach_client = vpx3220_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "vpx3220", + .driverid = I2C_DRIVERID_VPX3220, .command = vpx3220_command, + .probe = vpx3220_probe, + .remove = vpx3220_remove, + .id_table = vpx3220_id, }; - -static int __init -vpx3220_init (void) -{ - return i2c_add_driver(&vpx3220_i2c_driver); -} - -static void __exit -vpx3220_cleanup (void) -{ - i2c_del_driver(&vpx3220_i2c_driver); -} - -module_init(vpx3220_init); -module_exit(vpx3220_cleanup); - -MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); -MODULE_AUTHOR("Laurent Pinchart"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 2ff00bc5ad6..b2dbe48a92b 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -113,6 +113,7 @@ struct w9966_dev { signed char contrast; signed char color; signed char hue; + unsigned long in_use; }; /* @@ -184,10 +185,25 @@ static int w9966_v4l_ioctl(struct inode *inode, struct file *file, static ssize_t w9966_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *ppos); +static int w9966_exclusive_open(struct inode *inode, struct file *file) +{ + struct w9966_dev *cam = video_drvdata(file); + + return test_and_set_bit(0, &cam->in_use) ? -EBUSY : 0; +} + +static int w9966_exclusive_release(struct inode *inode, struct file *file) +{ + struct w9966_dev *cam = video_drvdata(file); + + clear_bit(0, &cam->in_use); + return 0; +} + static const struct file_operations w9966_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = w9966_exclusive_open, + .release = w9966_exclusive_release, .ioctl = w9966_v4l_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -198,6 +214,7 @@ static const struct file_operations w9966_fops = { static struct video_device w9966_template = { .name = W9966_DRIVERNAME, .fops = &w9966_fops, + .release = video_device_release_empty, }; /* @@ -332,7 +349,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) // Fill in the video_device struct and register us to v4l memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device)); - cam->vdev.priv = cam; + video_set_drvdata(&cam->vdev, cam); if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) return -1; @@ -713,8 +730,7 @@ static int w9966_wReg_i2c(struct w9966_dev* cam, int reg, int data) static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { - struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = vdev->priv; + struct w9966_dev *cam = video_drvdata(file); switch(cmd) { @@ -872,8 +888,7 @@ static int w9966_v4l_ioctl(struct inode *inode, struct file *file, static ssize_t w9966_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = vdev->priv; + struct w9966_dev *cam = video_drvdata(file); unsigned char addr = 0xa0; // ECP, read, CCD-transfer, 00000 unsigned char __user *dest = (unsigned char __user *)buf; unsigned long dleft = count; diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index 11edf79f57b..dcd45dbd82d 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -111,7 +111,7 @@ static int specific_debug = W9968CF_SPECIFIC_DEBUG; static unsigned int param_nv[24]; /* number of values per parameter */ -#ifdef CONFIG_KMOD +#ifdef CONFIG_MODULES module_param(ovmod_load, bool, 0644); #endif module_param(simcams, ushort, 0644); @@ -144,7 +144,7 @@ module_param(debug, ushort, 0644); module_param(specific_debug, bool, 0644); #endif -#ifdef CONFIG_KMOD +#ifdef CONFIG_MODULES MODULE_PARM_DESC(ovmod_load, "\n<0|1> Automatic 'ovcamchip' module loading." "\n0 disabled, 1 enabled." diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 0c3287734c9..6a0902bcba6 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -657,7 +657,7 @@ static int zc0301_open(struct inode* inode, struct file* filp) if (!down_read_trylock(&zc0301_dev_lock)) return -EAGAIN; - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); if (wait_for_completion_interruptible(&cam->probe)) { up_read(&zc0301_dev_lock); @@ -739,7 +739,7 @@ static int zc0301_release(struct inode* inode, struct file* filp) down_write(&zc0301_dev_lock); - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); zc0301_stop_transfer(cam); zc0301_release_buffers(cam); @@ -759,7 +759,7 @@ static int zc0301_release(struct inode* inode, struct file* filp) static ssize_t zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); struct zc0301_frame_t* f, * i; unsigned long lock_flags; long timeout; @@ -866,7 +866,7 @@ exit: static unsigned int zc0301_poll(struct file *filp, poll_table *wait) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); struct zc0301_frame_t* f; unsigned long lock_flags; unsigned int mask = 0; @@ -941,7 +941,7 @@ static struct vm_operations_struct zc0301_vm_ops = { static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; void *pos; @@ -1796,7 +1796,7 @@ zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg) static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp, unsigned int cmd, void __user * arg) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); switch (cmd) { @@ -1891,7 +1891,7 @@ static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp, static int zc0301_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); int err = 0; if (mutex_lock_interruptible(&cam->fileop_mutex)) diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig new file mode 100644 index 00000000000..4ea5fa71de8 --- /dev/null +++ b/drivers/media/video/zoran/Kconfig @@ -0,0 +1,73 @@ +config VIDEO_ZORAN + tristate "Zoran ZR36057/36067 Video For Linux" + depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS + help + Say Y for support for MJPEG capture cards based on the Zoran + 36057/36067 PCI controller chipset. This includes the Iomega + Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is + a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For + more information, check <file:Documentation/video4linux/Zoran>. + + To compile this driver as a module, choose M here: the + module will be called zr36067. + +config VIDEO_ZORAN_DC30 + tristate "Pinnacle/Miro DC30(+) support" + depends on VIDEO_ZORAN + select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback + card. This also supports really old DC10 cards based on the + zr36050 MJPEG codec and zr36016 VFE. + +config VIDEO_ZORAN_ZR36060 + tristate "Zoran ZR36060" + depends on VIDEO_ZORAN + help + Say Y to support Zoran boards based on 36060 chips. + This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 + and 33 R10 and AverMedia 6 boards. + +config VIDEO_ZORAN_BUZ + tristate "Iomega Buz support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Iomega Buz MJPEG capture/playback card. + +config VIDEO_ZORAN_DC10 + tristate "Pinnacle/Miro DC10(+) support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback + card. + +config VIDEO_ZORAN_LML33 + tristate "Linux Media Labs LML33 support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Linux Media Labs LML33 MJPEG capture/playback + card. + +config VIDEO_ZORAN_LML33R10 + tristate "Linux Media Labs LML33R10 support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO + help + support for the Linux Media Labs LML33R10 MJPEG capture/playback + card. + +config VIDEO_ZORAN_AVS6EYES + tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" + depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 + select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the AverMedia 6 Eyes video surveillance card. diff --git a/drivers/media/video/zoran/Makefile b/drivers/media/video/zoran/Makefile new file mode 100644 index 00000000000..44cc13352c8 --- /dev/null +++ b/drivers/media/video/zoran/Makefile @@ -0,0 +1,6 @@ +zr36067-objs := zoran_procfs.o zoran_device.o \ + zoran_driver.o zoran_card.o + +obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o +obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o +obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o diff --git a/drivers/media/video/videocodec.c b/drivers/media/video/zoran/videocodec.c index cf24956f320..cf24956f320 100644 --- a/drivers/media/video/videocodec.c +++ b/drivers/media/video/zoran/videocodec.c diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/zoran/videocodec.h index 97a3bbeda50..97a3bbeda50 100644 --- a/drivers/media/video/videocodec.h +++ b/drivers/media/video/zoran/videocodec.h diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran/zoran.h index 46b7ad477ce..46b7ad477ce 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran/zoran.h diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 3282be73029..fa5f2f8f518 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -817,6 +817,7 @@ zoran_register_i2c (struct zoran *zr) memcpy(&zr->i2c_algo, &zoran_i2c_bit_data_template, sizeof(struct i2c_algo_bit_data)); zr->i2c_algo.data = zr; + zr->i2c_adapter.class = I2C_CLASS_TV_ANALOG; zr->i2c_adapter.id = I2C_HW_B_ZR36067; zr->i2c_adapter.client_register = zoran_i2c_client_register; zr->i2c_adapter.client_unregister = zoran_i2c_client_unregister; diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index e4dc9d29b40..e4dc9d29b40 100644 --- a/drivers/media/video/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index 88d369708e4..5d948ff7faf 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -58,8 +58,6 @@ ZR36057_ISR_GIRQ1 | \ ZR36057_ISR_JPEGRepIRQ ) -extern const struct zoran_format zoran_formats[]; - static int lml33dpath; /* default = 0 * 1 will use digital path in capture * mode instead of analog. It can be @@ -377,7 +375,7 @@ zr36057_set_vfe (struct zoran *zr, /* horizontal */ VidWinWid = video_width; - X = (VidWinWid * 64 + tvn->Wa - 1) / tvn->Wa; + X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa); We = (VidWinWid * 64) / X; HorDcm = 64 - X; hcrop1 = 2 * ((tvn->Wa - We) / 4); @@ -403,7 +401,7 @@ zr36057_set_vfe (struct zoran *zr, /* Vertical */ DispMode = !(video_height > BUZ_MAX_HEIGHT / 2); VidWinHt = DispMode ? video_height : video_height / 2; - Y = (VidWinHt * 64 * 2 + tvn->Ha - 1) / tvn->Ha; + Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha); He = (VidWinHt * 64) / Y; VerDcm = 64 - Y; vcrop1 = (tvn->Ha / 2 - He) / 2; diff --git a/drivers/media/video/zoran_device.h b/drivers/media/video/zoran/zoran_device.h index 37fa86a3408..74c6c8edb7d 100644 --- a/drivers/media/video/zoran_device.h +++ b/drivers/media/video/zoran/zoran_device.h @@ -78,6 +78,14 @@ extern void zoran_set_pci_master(struct zoran *zr, extern void zoran_init_hardware(struct zoran *zr); extern void zr36057_restart(struct zoran *zr); +extern const struct zoran_format zoran_formats[]; + +extern int v4l_nbufs; +extern int v4l_bufsize; +extern int jpg_nbufs; +extern int jpg_bufsize; +extern int pass_through; + /* i2c */ extern int decoder_command(struct zoran *zr, int cmd, diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 2dab9eea4de..db11ab9e60d 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -194,12 +194,6 @@ const struct zoran_format zoran_formats[] = { // RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined -extern int v4l_nbufs; -extern int v4l_bufsize; -extern int jpg_nbufs; -extern int jpg_bufsize; -extern int pass_through; - static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */ module_param(lock_norm, int, 0644); MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)"); @@ -1211,6 +1205,7 @@ zoran_open (struct inode *inode, struct zoran_fh *fh; int i, res, first_open = 0, have_module_locks = 0; + lock_kernel(); /* find the device */ for (i = 0; i < zoran_num; i++) { if (zoran[i]->video_dev->minor == minor) { @@ -1321,6 +1316,7 @@ zoran_open (struct inode *inode, file->private_data = fh; fh->zr = zr; zoran_open_init_session(file); + unlock_kernel(); return 0; @@ -1338,6 +1334,7 @@ open_unlock_and_return: if (zr) { /*mutex_unlock(&zr->resource_lock);*/ } + unlock_kernel(); return res; } @@ -2920,6 +2917,8 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.pix.bytesperline = 0; fmt->fmt.pix.sizeimage = fh->jpg_buffers.buffer_size; + fmt->fmt.pix.colorspace = + V4L2_COLORSPACE_SMPTE170M; /* we hereby abuse this variable to show that * we're gonna do mjpeg capture */ @@ -2979,6 +2978,8 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.pix.sizeimage = fh->v4l_settings.height * fh->v4l_settings.bytesperline; + fmt->fmt.pix.colorspace = + fh->v4l_settings.format->colorspace; if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2)) fmt->fmt.pix.field = @@ -2995,7 +2996,6 @@ zoran_do_ioctl (struct inode *inode, break; default: - dprintk(3, "unsupported\n"); dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - unsupported type %d\n", diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran/zoran_procfs.c index 870bc5a70e3..870bc5a70e3 100644 --- a/drivers/media/video/zoran_procfs.c +++ b/drivers/media/video/zoran/zoran_procfs.c diff --git a/drivers/media/video/zoran_procfs.h b/drivers/media/video/zoran/zoran_procfs.h index f2d5b1ba448..f2d5b1ba448 100644 --- a/drivers/media/video/zoran_procfs.h +++ b/drivers/media/video/zoran/zoran_procfs.h diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zoran/zr36016.c index 00d132bcd1e..00d132bcd1e 100644 --- a/drivers/media/video/zr36016.c +++ b/drivers/media/video/zoran/zr36016.c diff --git a/drivers/media/video/zr36016.h b/drivers/media/video/zoran/zr36016.h index 8c79229f69d..8c79229f69d 100644 --- a/drivers/media/video/zr36016.h +++ b/drivers/media/video/zoran/zr36016.h diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zoran/zr36050.c index cf8b271a1c8..cf8b271a1c8 100644 --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zoran/zr36050.c diff --git a/drivers/media/video/zr36050.h b/drivers/media/video/zoran/zr36050.h index 9f52f0cdde5..9f52f0cdde5 100644 --- a/drivers/media/video/zr36050.h +++ b/drivers/media/video/zoran/zr36050.h diff --git a/drivers/media/video/zr36057.h b/drivers/media/video/zoran/zr36057.h index 54c9362aa98..54c9362aa98 100644 --- a/drivers/media/video/zr36057.h +++ b/drivers/media/video/zoran/zr36057.h diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zoran/zr36060.c index 8e74054d5ef..8e74054d5ef 100644 --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c diff --git a/drivers/media/video/zr36060.h b/drivers/media/video/zoran/zr36060.h index 914ffa4ad8d..914ffa4ad8d 100644 --- a/drivers/media/video/zr36060.h +++ b/drivers/media/video/zoran/zr36060.h diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 18d1c4ba79f..7cdac99deea 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -52,7 +52,7 @@ /* Debug macro */ -#define DBG(x...) if (debug) info(x) +#define DBG(x...) if (debug) printk(KERN_INFO KBUILD_MODNAME x) /* Init methods, need to find nicer names for these @@ -116,6 +116,7 @@ struct zr364xx_camera { int height; int method; struct mutex lock; + int users; }; @@ -127,7 +128,7 @@ static int send_control_msg(struct usb_device *udev, u8 request, u16 value, unsigned char *transfer_buffer = kmalloc(size, GFP_KERNEL); if (!transfer_buffer) { - info("kmalloc(%d) failed", size); + dev_err(&udev->dev, "kmalloc(%d) failed\n", size); return -ENOMEM; } @@ -143,7 +144,8 @@ static int send_control_msg(struct usb_device *udev, u8 request, u16 value, kfree(transfer_buffer); if (status < 0) - info("Failed sending control message, error %d.", status); + dev_err(&udev->dev, + "Failed sending control message, error %d.\n", status); return status; } @@ -303,11 +305,11 @@ static int read_frame(struct zr364xx_camera *cam, int framenum) DBG("buffer : %d %d", cam->buffer[0], cam->buffer[1]); DBG("bulk : n=%d size=%d", n, actual_length); if (n < 0) { - info("error reading bulk msg"); + dev_err(&cam->udev->dev, "error reading bulk msg\n"); return 0; } if (actual_length < 0 || actual_length > BUFFER_SIZE) { - info("wrong number of bytes"); + dev_err(&cam->udev->dev, "wrong number of bytes\n"); return 0; } @@ -641,42 +643,47 @@ static int zr364xx_open(struct inode *inode, struct file *file) DBG("zr364xx_open"); - cam->skip = 2; + mutex_lock(&cam->lock); - err = video_exclusive_open(inode, file); - if (err < 0) - return err; + if (cam->users) { + err = -EBUSY; + goto out; + } if (!cam->framebuf) { cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES); if (!cam->framebuf) { - info("vmalloc_32 failed!"); - return -ENOMEM; + dev_err(&cam->udev->dev, "vmalloc_32 failed!\n"); + err = -ENOMEM; + goto out; } } - mutex_lock(&cam->lock); for (i = 0; init[cam->method][i].size != -1; i++) { err = send_control_msg(udev, 1, init[cam->method][i].value, 0, init[cam->method][i].bytes, init[cam->method][i].size); if (err < 0) { - info("error during open sequence: %d", i); - mutex_unlock(&cam->lock); - return err; + dev_err(&cam->udev->dev, + "error during open sequence: %d\n", i); + goto out; } } + cam->skip = 2; + cam->users++; file->private_data = vdev; /* Added some delay here, since opening/closing the camera quickly, * like Ekiga does during its startup, can crash the webcam */ mdelay(100); + err = 0; +out: mutex_unlock(&cam->lock); - return 0; + return err; } @@ -697,28 +704,30 @@ static int zr364xx_release(struct inode *inode, struct file *file) udev = cam->udev; mutex_lock(&cam->lock); + + cam->users--; + file->private_data = NULL; + for (i = 0; i < 2; i++) { err = send_control_msg(udev, 1, init[cam->method][i].value, 0, init[i][cam->method].bytes, init[cam->method][i].size); if (err < 0) { - info("error during release sequence"); - mutex_unlock(&cam->lock); - return err; + dev_err(&udev->dev, "error during release sequence\n"); + goto out; } } - file->private_data = NULL; - video_exclusive_release(inode, file); - /* Added some delay here, since opening/closing the camera quickly, * like Ekiga does during its startup, can crash the webcam */ mdelay(100); + err = 0; +out: mutex_unlock(&cam->lock); - return 0; + return err; } @@ -801,13 +810,14 @@ static int zr364xx_probe(struct usb_interface *intf, DBG("probing..."); - info(DRIVER_DESC " compatible webcam plugged"); - info("model %04x:%04x detected", udev->descriptor.idVendor, - udev->descriptor.idProduct); + dev_info(&intf->dev, DRIVER_DESC " compatible webcam plugged\n"); + dev_info(&intf->dev, "model %04x:%04x detected\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); cam = kzalloc(sizeof(struct zr364xx_camera), GFP_KERNEL); if (cam == NULL) { - info("cam: out of memory !"); + dev_err(&udev->dev, "cam: out of memory !\n"); return -ENOMEM; } /* save the init method used by this camera */ @@ -815,7 +825,7 @@ static int zr364xx_probe(struct usb_interface *intf, cam->vdev = video_device_alloc(); if (cam->vdev == NULL) { - info("cam->vdev: out of memory !"); + dev_err(&udev->dev, "cam->vdev: out of memory !\n"); kfree(cam); return -ENOMEM; } @@ -827,7 +837,7 @@ static int zr364xx_probe(struct usb_interface *intf, cam->udev = udev; if ((cam->buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL)) == NULL) { - info("cam->buffer: out of memory !"); + dev_info(&udev->dev, "cam->buffer: out of memory !\n"); video_device_release(cam->vdev); kfree(cam); return -ENODEV; @@ -835,17 +845,17 @@ static int zr364xx_probe(struct usb_interface *intf, switch (mode) { case 1: - info("160x120 mode selected"); + dev_info(&udev->dev, "160x120 mode selected\n"); cam->width = 160; cam->height = 120; break; case 2: - info("640x480 mode selected"); + dev_info(&udev->dev, "640x480 mode selected\n"); cam->width = 640; cam->height = 480; break; default: - info("320x240 mode selected"); + dev_info(&udev->dev, "320x240 mode selected\n"); cam->width = 320; cam->height = 240; break; @@ -865,7 +875,7 @@ static int zr364xx_probe(struct usb_interface *intf, err = video_register_device(cam->vdev, VFL_TYPE_GRABBER, -1); if (err) { - info("video_register_device failed"); + dev_err(&udev->dev, "video_register_device failed\n"); video_device_release(cam->vdev); kfree(cam->buffer); kfree(cam); @@ -874,7 +884,8 @@ static int zr364xx_probe(struct usb_interface *intf, usb_set_intfdata(intf, cam); - info(DRIVER_DESC " controlling video device %d", cam->vdev->minor); + dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n", + cam->vdev->minor); return 0; } @@ -884,7 +895,7 @@ static void zr364xx_disconnect(struct usb_interface *intf) struct zr364xx_camera *cam = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); dev_set_drvdata(&intf->dev, NULL); - info(DRIVER_DESC " webcam unplugged"); + dev_info(&intf->dev, DRIVER_DESC " webcam unplugged\n"); if (cam->vdev) video_unregister_device(cam->vdev); cam->vdev = NULL; @@ -913,16 +924,16 @@ static int __init zr364xx_init(void) int retval; retval = usb_register(&zr364xx_driver); if (retval) - info("usb_register failed!"); + printk(KERN_ERR KBUILD_MODNAME ": usb_register failed!\n"); else - info(DRIVER_DESC " module loaded"); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); return retval; } static void __exit zr364xx_exit(void) { - info(DRIVER_DESC " module unloaded"); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC " module unloaded\n"); usb_deregister(&zr364xx_driver); } |