diff options
Diffstat (limited to 'drivers/media')
60 files changed, 43970 insertions, 2 deletions
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index c2602b34049..baa9f58beff 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -50,5 +50,19 @@ config VIDEO_IR config VIDEO_TVEEPROM tristate +config USB_DABUSB + tristate "DABUSB driver" + depends on USB + ---help--- + A Digital Audio Broadcasting (DAB) Receiver for USB and Linux + brought to you by the DAB-Team + <http://wwwbode.cs.tum.edu/Par/arch/dab/>. This driver can be taken + as an example for URB-based bulk, control, and isochronous + transactions. URB's are explained in + <Documentation/usb/URB.txt>. + + To compile this driver as a module, choose M here: the + module will be called dabusb. + endmenu diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index b3d3b22d3f7..1f8a46b5916 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -291,8 +291,6 @@ config VIDEO_HEXIUM_GEMINI source "drivers/media/video/cx88/Kconfig" -source "drivers/media/video/em28xx/Kconfig" - config VIDEO_OVCAMCHIP tristate "OmniVision Camera Chip support" depends on VIDEO_DEV && I2C @@ -367,4 +365,234 @@ config VIDEO_SAA7127 To compile this driver as a module, choose M here: the module will be called saa7127 +# +# USB Multimedia device configuration +# + +menu "V4L USB devices" + depends on USB && VIDEO_DEV + +source "drivers/media/video/em28xx/Kconfig" + +config USB_VICAM + tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" + depends on USB && VIDEO_DEV && EXPERIMENTAL + ---help--- + Say Y here if you have 3com homeconnect camera (vicam). + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Multimedia Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called vicam. + +config USB_DSBR + tristate "D-Link USB FM radio support (EXPERIMENTAL)" + depends on USB && VIDEO_DEV && EXPERIMENTAL + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + This driver uses the Video For Linux API. You must enable + (Y or M in config) Video For Linux (under Character Devices) + to use this driver. Information on this API and pointers to + "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called dsbr100. + +config USB_ET61X251 + tristate "USB ET61X[12]51 PC Camera Controller support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for cameras based on Etoms ET61X151 + or ET61X251 PC Camera Controllers. + + See <file:Documentation/usb/et61x251.txt> for more informations. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called et61x251. + +config USB_IBMCAM + tristate "USB IBM (Xirlink) C-it Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect a IBM "C-It" camera, also known as + "Xirlink PC Camera" to your computer's USB port. For more + information, read <file:Documentation/usb/ibmcam.txt>. + + This driver uses the Video For Linux API. You must enable + (Y or M in config) Video For Linux (under Character Devices) + to use this driver. Information on this API and pointers to + "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called ibmcam. + + This camera has several configuration options which + can be specified when you load the module. Read + <file:Documentation/usb/ibmcam.txt> to learn more. + +config USB_KONICAWC + tristate "USB Konica Webcam support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for webcams based on a Konica + chipset. This is known to work with the Intel YC76 webcam. + + This driver uses the Video For Linux API. You must enable + (Y or M in config) Video For Linux (under Character Devices) + to use this driver. Information on this API and pointers to + "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called konicawc. + +config USB_OV511 + tristate "USB OV511 Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. See <file:Documentation/usb/ov511.txt> for more + information and for a list of supported cameras. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Character Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called ov511. + +config USB_SE401 + tristate "USB SE401 Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. See <file:Documentation/usb/se401.txt> for more + information and for a list of supported cameras. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Multimedia Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called se401. + +config USB_SN9C102 + tristate "USB SN9C10x PC Camera Controller support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for cameras based on SONiX SN9C101, + SN9C102 or SN9C103 PC Camera Controllers. + + See <file:Documentation/usb/sn9c102.txt> for more informations. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called sn9c102. + +config USB_STV680 + tristate "USB STV680 (Pencam) Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. This includes the Pencam line of cameras. + See <file:Documentation/usb/stv680.txt> for more information and for + a list of supported cameras. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Multimedia Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called stv680. + +config USB_W9968CF + tristate "USB W996[87]CF JPEG Dual Mode Camera support" + depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP + ---help--- + Say Y here if you want support for cameras based on OV681 or + Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. + + This driver has an optional plugin, which is distributed as a + separate module only (released under GPL). It allows to use higher + resolutions and framerates, but cannot be included in the official + Linux kernel for performance purposes. + + See <file:Documentation/usb/w9968cf.txt> for more informations. + + This driver uses the Video For Linux and the I2C APIs. It needs the + OmniVision Camera Chip support as well. You must say Y or M to + "Video For Linux", "I2C Support" and "OmniVision Camera Chip + support" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called w9968cf. + +config USB_ZC0301 + tristate "USB ZC0301 Image Processor and Control Chip support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for cameras based on the ZC0301 + Image Processor and Control Chip. + + See <file:Documentation/usb/zc0301.txt> for more informations. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called zc0301. + +config USB_PWC + tristate "USB Philips Cameras" + depends on USB && VIDEO_DEV + ---help--- + Say Y or M here if you want to use one of these Philips & OEM + webcams: + * Philips PCA645, PCA646 + * Philips PCVC675, PCVC680, PCVC690 + * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 + * Askey VC010 + * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' + and 'Orbit'/'Sphere' + * Samsung MPC-C10, MPC-C30 + * Creative Webcam 5, Pro Ex + * SOTEC Afina Eye + * Visionite VCS-UC300, VCS-UM100 + + The PCA635, PCVC665 and PCVC720/20 are not supported by this driver + and never will be, but the 665 and 720/20 are supported by other + drivers. + + See <file:Documentation/usb/philips.txt> for more information and + installation instructions. + + The built-in microphone is enabled by selecting USB Audio support. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Character Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called pwc. + +endmenu # V4L USB devices + endmenu diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 1a56a2d9e29..1c0e72e5a59 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -65,4 +65,23 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o +et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o +zc0301-objs := zc0301_core.o zc0301_pas202bcb.o + +obj-$(CONFIG_USB_DABUSB) += dabusb.o +obj-$(CONFIG_USB_DSBR) += dsbr100.o +obj-$(CONFIG_USB_OV511) += ov511.o +obj-$(CONFIG_USB_SE401) += se401.o +obj-$(CONFIG_USB_STV680) += stv680.o +obj-$(CONFIG_USB_W9968CF) += w9968cf.o + +obj-$(CONFIG_USB_SN9C102) += sn9c102/ +obj-$(CONFIG_USB_ET61X251) += et61x251/ +obj-$(CONFIG_USB_PWC) += pwc/ +obj-$(CONFIG_USB_ZC0301) += zc0301/ + +obj-$(CONFIG_USB_IBMCAM) += usbvideo/ +obj-$(CONFIG_USB_KONICAWC) += usbvideo/ +obj-$(CONFIG_USB_VICAM) += usbvideo/ + EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core diff --git a/drivers/media/video/dabfirmware.h b/drivers/media/video/dabfirmware.h new file mode 100644 index 00000000000..d14d803566a --- /dev/null +++ b/drivers/media/video/dabfirmware.h @@ -0,0 +1,1408 @@ +/* + * dabdata.h - dab usb firmware and bitstream data + */ + +static INTEL_HEX_RECORD firmware[] = { + +{ 2, 0x0000, 0, {0x21,0x57} }, +{ 3, 0x0003, 0, {0x02,0x01,0x66} }, +{ 3, 0x000b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0013, 0, {0x02,0x01,0x66} }, +{ 3, 0x001b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0023, 0, {0x02,0x01,0x66} }, +{ 3, 0x002b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0033, 0, {0x02,0x03,0x0f} }, +{ 3, 0x003b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0043, 0, {0x02,0x01,0x00} }, +{ 3, 0x004b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0053, 0, {0x02,0x01,0x66} }, +{ 3, 0x005b, 0, {0x02,0x04,0xbd} }, +{ 3, 0x0063, 0, {0x02,0x01,0x67} }, +{ 3, 0x0100, 0, {0x02,0x0c,0x5a} }, +{ 3, 0x0104, 0, {0x02,0x01,0xed} }, +{ 3, 0x0108, 0, {0x02,0x02,0x51} }, +{ 3, 0x010c, 0, {0x02,0x02,0x7c} }, +{ 3, 0x0110, 0, {0x02,0x02,0xe4} }, +{ 1, 0x0114, 0, {0x32} }, +{ 1, 0x0118, 0, {0x32} }, +{ 3, 0x011c, 0, {0x02,0x05,0xfd} }, +{ 3, 0x0120, 0, {0x02,0x00,0x00} }, +{ 3, 0x0124, 0, {0x02,0x00,0x00} }, +{ 3, 0x0128, 0, {0x02,0x04,0x3c} }, +{ 3, 0x012c, 0, {0x02,0x04,0x6a} }, +{ 3, 0x0130, 0, {0x02,0x00,0x00} }, +{ 3, 0x0134, 0, {0x02,0x00,0x00} }, +{ 3, 0x0138, 0, {0x02,0x00,0x00} }, +{ 3, 0x013c, 0, {0x02,0x00,0x00} }, +{ 3, 0x0140, 0, {0x02,0x00,0x00} }, +{ 3, 0x0144, 0, {0x02,0x00,0x00} }, +{ 3, 0x0148, 0, {0x02,0x00,0x00} }, +{ 3, 0x014c, 0, {0x02,0x00,0x00} }, +{ 3, 0x0150, 0, {0x02,0x00,0x00} }, +{ 3, 0x0154, 0, {0x02,0x00,0x00} }, +{ 10, 0x0157, 0, {0x75,0x81,0x7f,0xe5,0x82,0x60,0x03,0x02,0x01,0x61} }, +{ 5, 0x0161, 0, {0x12,0x07,0x6f,0x21,0x64} }, +{ 1, 0x0166, 0, {0x32} }, +{ 14, 0x0167, 0, {0xc0,0xd0,0xc0,0x86,0xc0,0x82,0xc0,0x83,0xc0,0xe0,0x90,0x7f,0x97,0xe0} }, +{ 14, 0x0175, 0, {0x44,0x80,0xf0,0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x0183, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x0191, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x90,0x7f,0x97,0xe0} }, +{ 3, 0x019f, 0, {0x55,0x7f,0xf0} }, +{ 14, 0x01a2, 0, {0x90,0x7f,0x9a,0xe0,0x30,0xe4,0x23,0x90,0x7f,0x68,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x01b0, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x01be, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x01cc, 0, {0xe5,0xd8,0xc2,0xe3,0xf5,0xd8,0xd0,0xe0,0xd0,0x83,0xd0,0x82,0xd0,0x86} }, +{ 3, 0x01da, 0, {0xd0,0xd0,0x32} }, +{ 8, 0x01dd, 0, {0x75,0x86,0x00,0x90,0xff,0xc3,0x7c,0x05} }, +{ 7, 0x01e5, 0, {0xa3,0xe5,0x82,0x45,0x83,0x70,0xf9} }, +{ 1, 0x01ec, 0, {0x22} }, +{ 14, 0x01ed, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0xd0} }, +{ 14, 0x01fb, 0, {0x75,0xd0,0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91} }, +{ 13, 0x0209, 0, {0x90,0x88,0x00,0xe0,0xf5,0x41,0x90,0x7f,0xab,0x74,0x02,0xf0,0x90} }, +{ 9, 0x0216, 0, {0x7f,0xab,0x74,0x02,0xf0,0xe5,0x32,0x60,0x21} }, +{ 4, 0x021f, 0, {0x7a,0x00,0x7b,0x00} }, +{ 11, 0x0223, 0, {0xc3,0xea,0x94,0x18,0xeb,0x64,0x80,0x94,0x80,0x50,0x12} }, +{ 14, 0x022e, 0, {0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x0a,0xba,0x00} }, +{ 2, 0x023c, 0, {0x01,0x0b} }, +{ 2, 0x023e, 0, {0x80,0xe3} }, +{ 2, 0x0240, 0, {0xd0,0x86} }, +{ 14, 0x0242, 0, {0xd0,0xd0,0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0} }, +{ 1, 0x0250, 0, {0x32} }, +{ 14, 0x0251, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x025f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} }, +{ 4, 0x026d, 0, {0x04,0xf0,0xd0,0x86} }, +{ 11, 0x0271, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x027c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x028a, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 13, 0x0298, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, +{ 12, 0x02a5, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0x6e,0x00,0x75,0x6f,0x02,0x12} }, +{ 6, 0x02b1, 0, {0x11,0x44,0x75,0x70,0x39,0x75} }, +{ 6, 0x02b7, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} }, +{ 12, 0x02bd, 0, {0x11,0x75,0x90,0x7f,0xd6,0xe4,0xf0,0x75,0xd8,0x20,0xd0,0x86} }, +{ 14, 0x02c9, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x02d7, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x02e4, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x02f2, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} }, +{ 4, 0x0300, 0, {0x10,0xf0,0xd0,0x86} }, +{ 11, 0x0304, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x030f, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x031d, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 12, 0x032b, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0x75,0x6e,0x00,0x75,0x6f,0x02} }, +{ 7, 0x0337, 0, {0x12,0x11,0x44,0x75,0x70,0x40,0x75} }, +{ 6, 0x033e, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} }, +{ 14, 0x0344, 0, {0x11,0x75,0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0} }, +{ 5, 0x0352, 0, {0x75,0xd8,0x10,0xd0,0x86} }, +{ 14, 0x0357, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x0365, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 13, 0x0372, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} }, +{ 12, 0x037f, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x42,0xf0,0x12,0x10,0x1b,0x90} }, +{ 13, 0x038b, 0, {0x7f,0xa6,0xe5,0x43,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40} }, +{ 1, 0x0398, 0, {0xf0} }, +{ 1, 0x0399, 0, {0x22} }, +{ 13, 0x039a, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} }, +{ 12, 0x03a7, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x44,0xf0,0x12,0x10,0x1b,0x90} }, +{ 12, 0x03b3, 0, {0x7f,0xa6,0xe5,0x45,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0xe5} }, +{ 11, 0x03bf, 0, {0x46,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40,0xf0} }, +{ 1, 0x03ca, 0, {0x22} }, +{ 10, 0x03cb, 0, {0x75,0x44,0x02,0x75,0x45,0x00,0x75,0x46,0x00,0x12} }, +{ 9, 0x03d5, 0, {0x03,0x9a,0x75,0x42,0x03,0x75,0x43,0x00,0x12} }, +{ 2, 0x03de, 0, {0x03,0x72} }, +{ 1, 0x03e0, 0, {0x22} }, +{ 12, 0x03e1, 0, {0x90,0x88,0x00,0xe5,0x36,0xf0,0x90,0x88,0x00,0x74,0x10,0x25} }, +{ 9, 0x03ed, 0, {0x36,0xf0,0x12,0x01,0xdd,0x75,0x42,0x01,0x75} }, +{ 9, 0x03f6, 0, {0x43,0x18,0x12,0x03,0x72,0x75,0x44,0x02,0x75} }, +{ 9, 0x03ff, 0,{0x45,0x00,0x75,0x46,0x00,0x12,0x03,0x9a,0x75} }, +{ 8, 0x0408, 0,{0x42,0x03,0x75,0x43,0x44,0x12,0x03,0x72} }, +{ 1, 0x0410, 0,{0x22} }, +{ 14, 0x0411, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x041f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} }, +{ 4, 0x042d, 0, {0x02,0xf0,0xd0,0x86} }, +{ 11, 0x0431, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x043c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x044a, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xa9,0x74} }, +{ 7, 0x0458, 0, {0x04,0xf0,0x75,0x30,0x01,0xd0,0x86} }, +{ 11, 0x045f, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x046a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x0478, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} }, +{ 7, 0x0486, 0, {0x04,0xf0,0x75,0x31,0x01,0xd0,0x86} }, +{ 11, 0x048d, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x0498, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 12, 0x04a6, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe5,0xf5,0x91,0xd0,0x86} }, +{ 11, 0x04b2, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x04bd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 12, 0x04cb, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe7,0xf5,0x91,0xd0,0x86} }, +{ 11, 0x04d7, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 12, 0x04e2, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x20,0x90,0x7f,0x96,0xe4,0xf0} }, +{ 1, 0x04ee, 0, {0x22} }, +{ 7, 0x04ef, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x21} }, +{ 1, 0x04f6, 0, {0x22} }, +{ 14, 0x04f7, 0, {0x90,0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xe0,0xfb,0x74,0x80,0x2a,0xfa} }, +{ 14, 0x0505, 0, {0x74,0x80,0x2b,0xfb,0xea,0x03,0x03,0x54,0x3f,0xfc,0xea,0xc4,0x23,0x54} }, +{ 14, 0x0513, 0, {0x1f,0xfa,0x2c,0xfa,0xeb,0x03,0x03,0x54,0x3f,0xfc,0xeb,0xc4,0x23,0x54} }, +{ 11, 0x0521, 0, {0x1f,0xfb,0x2c,0xfb,0x90,0x17,0x0a,0xe0,0xfc,0x60,0x02} }, +{ 2, 0x052c, 0, {0x7a,0x00} }, +{ 7, 0x052e, 0, {0x90,0x17,0x0c,0xe0,0xfc,0x60,0x02} }, +{ 2, 0x0535, 0, {0x7b,0x00} }, +{ 11, 0x0537, 0, {0xea,0x2b,0xfc,0xc3,0x13,0xf5,0x3a,0x75,0x44,0x02,0x8b} }, +{ 7, 0x0542, 0, {0x45,0x8a,0x46,0x12,0x03,0x9a,0x75} }, +{ 9, 0x0549, 0, {0x6e,0x08,0x75,0x6f,0x00,0x12,0x11,0x44,0x75} }, +{ 4, 0x0552, 0, {0x70,0x47,0x75,0x71} }, +{ 8, 0x0556, 0, {0x0c,0x75,0x72,0x02,0x12,0x11,0x75,0x85} }, +{ 5, 0x055e, 0, {0x3a,0x73,0x12,0x11,0xa0} }, +{ 1, 0x0563, 0, {0x22} }, +{ 14, 0x0564, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} }, +{ 14, 0x0572, 0, {0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xef,0xe0,0xfc} }, +{ 14, 0x0580, 0, {0x33,0x95,0xe0,0xfd,0x8c,0x05,0x7c,0x00,0x90,0x7f,0xee,0xe0,0xfe,0x33} }, +{ 14, 0x058e, 0, {0x95,0xe0,0xff,0xec,0x2e,0xfc,0xed,0x3f,0xfd,0x90,0x7f,0xe9,0xe0,0xfe} }, +{ 5, 0x059c, 0, {0xbe,0x01,0x02,0x80,0x03} }, +{ 3, 0x05a1, 0, {0x02,0x05,0xf9} }, +{ 6, 0x05a4, 0, {0xbc,0x01,0x21,0xbd,0x00,0x1e} }, +{ 14, 0x05aa, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfc,0xeb,0x25,0xe0,0xfd,0x2c,0x24,0x00,0xfc} }, +{ 14, 0x05b8, 0, {0xe4,0x34,0x17,0xfd,0x90,0x7e,0xc0,0xe0,0xfe,0x8c,0x82,0x8d,0x83,0xf0} }, +{ 2, 0x05c6, 0, {0x80,0x31} }, +{ 14, 0x05c8, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfa,0xeb,0x25,0xe0,0xfb,0x2a,0xfa,0x24,0x00} }, +{ 14, 0x05d6, 0, {0xfb,0xe4,0x34,0x17,0xfc,0x90,0x7e,0xc0,0xe0,0xfd,0x8b,0x82,0x8c,0x83} }, +{ 14, 0x05e4, 0, {0xf0,0x74,0x01,0x2a,0x24,0x00,0xfa,0xe4,0x34,0x17,0xfb,0x90,0x7e,0xc1} }, +{ 7, 0x05f2, 0, {0xe0,0xfc,0x8a,0x82,0x8b,0x83,0xf0} }, +{ 3, 0x05f9, 0, {0x75,0x38,0x01} }, +{ 1, 0x05fc, 0, {0x22} }, +{ 14, 0x05fd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x060b, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 13, 0x0619, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, +{ 13, 0x0626, 0, {0x7f,0xaa,0x74,0x01,0xf0,0x12,0x05,0x64,0x75,0x37,0x00,0xd0,0x86} }, +{ 14, 0x0633, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x0641, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x064e, 0, {0x90,0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xee,0xe0} }, +{ 14, 0x065c, 0, {0xfc,0x33,0x95,0xe0,0xfd,0x90,0x7f,0x96,0xe0,0xfe,0x90,0x7f,0x96,0x74} }, +{ 14, 0x066a, 0, {0x80,0x65,0x06,0xf0,0x90,0x7f,0x00,0x74,0x01,0xf0,0xea,0xc4,0x03,0x54} }, +{ 14, 0x0678, 0, {0xf8,0xfe,0xeb,0x25,0xe0,0xfb,0x2e,0xfe,0x24,0x00,0xfb,0xe4,0x34,0x17} }, +{ 14, 0x0686, 0, {0xff,0x8b,0x82,0x8f,0x83,0xe0,0xfb,0x74,0x01,0x2e,0x24,0x00,0xfe,0xe4} }, +{ 14, 0x0694, 0, {0x34,0x17,0xff,0x8e,0x82,0x8f,0x83,0xe0,0xfe,0x90,0x7f,0xe9,0xe0,0xff} }, +{ 3, 0x06a2, 0, {0xbf,0x81,0x0a} }, +{ 10, 0x06a5, 0, {0x90,0x7f,0x00,0xeb,0xf0,0x90,0x7f,0x01,0xee,0xf0} }, +{ 8, 0x06af, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x82,0x1a} }, +{ 3, 0x06b7, 0, {0xba,0x01,0x0c} }, +{ 12, 0x06ba, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} }, +{ 11, 0x06c6, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0xb5,0xf0} }, +{ 8, 0x06d1, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x83,0x1b} }, +{ 3, 0x06d9, 0, {0xba,0x01,0x0d} }, +{ 13, 0x06dc, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} }, +{ 11, 0x06e9, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0x12,0xf0} }, +{ 8, 0x06f4, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x84,0x1c} }, +{ 3, 0x06fc, 0, {0xba,0x01,0x0d} }, +{ 13, 0x06ff, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0c} }, +{ 12, 0x070c, 0, {0x90,0x7f,0x00,0x74,0x80,0xf0,0x90,0x7f,0x01,0x74,0x01,0xf0} }, +{ 5, 0x0718, 0, {0x90,0x7f,0xb5,0xec,0xf0} }, +{ 1, 0x071d, 0, {0x22} }, +{ 12, 0x071e, 0, {0x75,0x36,0x0d,0x90,0x88,0x00,0x74,0x1d,0xf0,0x75,0x6b,0x80} }, +{ 10, 0x072a, 0, {0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, +{ 9, 0x0734, 0, {0x6c,0x0f,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, +{ 9, 0x073d, 0, {0x6c,0x06,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, +{ 7, 0x0746, 0, {0x6c,0x01,0x12,0x10,0xe2,0x7a,0x00} }, +{ 3, 0x074d, 0, {0xba,0xff,0x00} }, +{ 2, 0x0750, 0, {0x50,0x0a} }, +{ 10, 0x0752, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} }, +{ 10, 0x075c, 0, {0x75,0x6b,0x80,0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75} }, +{ 8, 0x0766, 0, {0x6b,0x80,0x75,0x6c,0x0f,0x12,0x10,0xe2} }, +{ 1, 0x076e, 0, {0x22} }, +{ 14, 0x076f, 0, {0x90,0x7f,0xa1,0xe4,0xf0,0x90,0x7f,0xaf,0x74,0x01,0xf0,0x90,0x7f,0x92} }, +{ 14, 0x077d, 0, {0x74,0x02,0xf0,0x75,0x8e,0x31,0x75,0x89,0x21,0x75,0x88,0x00,0x75,0xc8} }, +{ 14, 0x078b, 0, {0x00,0x75,0x8d,0x40,0x75,0x98,0x40,0x75,0xc0,0x40,0x75,0x87,0x00,0x75} }, +{ 9, 0x0799, 0, {0x20,0x00,0x75,0x21,0x00,0x75,0x22,0x00,0x75} }, +{ 5, 0x07a2, 0, {0x23,0x00,0x75,0x47,0x00} }, +{ 7, 0x07a7, 0, {0xc3,0xe5,0x47,0x94,0x20,0x50,0x11} }, +{ 13, 0x07ae, 0, {0xe5,0x47,0x24,0x00,0xf5,0x82,0xe4,0x34,0x17,0xf5,0x83,0xe4,0xf0} }, +{ 4, 0x07bb, 0, {0x05,0x47,0x80,0xe8} }, +{ 9, 0x07bf, 0, {0xe4,0xf5,0x40,0xf5,0x3f,0xe4,0xf5,0x3c,0xf5} }, +{ 7, 0x07c8, 0, {0x3b,0xe4,0xf5,0x3e,0xf5,0x3d,0x75} }, +{ 11, 0x07cf, 0, {0x32,0x00,0x75,0x37,0x00,0x75,0x39,0x00,0x90,0x7f,0x93} }, +{ 14, 0x07da, 0, {0x74,0x3c,0xf0,0x90,0x7f,0x9c,0x74,0xff,0xf0,0x90,0x7f,0x96,0x74,0x80} }, +{ 14, 0x07e8, 0, {0xf0,0x90,0x7f,0x94,0x74,0x70,0xf0,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} }, +{ 14, 0x07f6, 0, {0x7f,0x97,0xe4,0xf0,0x90,0x7f,0x95,0x74,0xc2,0xf0,0x90,0x7f,0x98,0x74} }, +{ 14, 0x0804, 0, {0x28,0xf0,0x90,0x7f,0x9e,0x74,0x28,0xf0,0x90,0x7f,0xf0,0xe4,0xf0,0x90} }, +{ 14, 0x0812, 0, {0x7f,0xf1,0xe4,0xf0,0x90,0x7f,0xf2,0xe4,0xf0,0x90,0x7f,0xf3,0xe4,0xf0} }, +{ 14, 0x0820, 0, {0x90,0x7f,0xf4,0xe4,0xf0,0x90,0x7f,0xf5,0xe4,0xf0,0x90,0x7f,0xf6,0xe4} }, +{ 14, 0x082e, 0, {0xf0,0x90,0x7f,0xf7,0xe4,0xf0,0x90,0x7f,0xf8,0xe4,0xf0,0x90,0x7f,0xf9} }, +{ 14, 0x083c, 0, {0x74,0x38,0xf0,0x90,0x7f,0xfa,0x74,0xa0,0xf0,0x90,0x7f,0xfb,0x74,0xa0} }, +{ 14, 0x084a, 0, {0xf0,0x90,0x7f,0xfc,0x74,0xa0,0xf0,0x90,0x7f,0xfd,0x74,0xa0,0xf0,0x90} }, +{ 14, 0x0858, 0, {0x7f,0xfe,0x74,0xa0,0xf0,0x90,0x7f,0xff,0x74,0xa0,0xf0,0x90,0x7f,0xe0} }, +{ 14, 0x0866, 0, {0x74,0x03,0xf0,0x90,0x7f,0xe1,0x74,0x01,0xf0,0x90,0x7f,0xdd,0x74,0x80} }, +{ 11, 0x0874, 0, {0xf0,0x12,0x12,0x43,0x12,0x07,0x1e,0x7a,0x00,0x7b,0x00} }, +{ 9, 0x087f, 0, {0xc3,0xea,0x94,0x1e,0xeb,0x94,0x00,0x50,0x17} }, +{ 12, 0x0888, 0, {0x90,0x88,0x00,0xe0,0xf5,0x47,0x90,0x88,0x0b,0xe0,0xf5,0x47} }, +{ 9, 0x0894, 0, {0x90,0x7f,0x68,0xf0,0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x089d, 0, {0x80,0xe0} }, +{ 12, 0x089f, 0, {0x12,0x03,0xe1,0x90,0x7f,0xd6,0xe4,0xf0,0x7a,0x00,0x7b,0x00} }, +{ 13, 0x08ab, 0, {0x8a,0x04,0x8b,0x05,0xc3,0xea,0x94,0xe0,0xeb,0x94,0x2e,0x50,0x1a} }, +{ 14, 0x08b8, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, +{ 10, 0x08c6, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x08d0, 0, {0x80,0xd9} }, +{ 13, 0x08d2, 0, {0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0,0x90} }, +{ 14, 0x08df, 0, {0x7f,0xde,0x74,0x05,0xf0,0x90,0x7f,0xdf,0x74,0x05,0xf0,0x90,0x7f,0xac} }, +{ 14, 0x08ed, 0, {0xe4,0xf0,0x90,0x7f,0xad,0x74,0x05,0xf0,0x75,0xa8,0x80,0x75,0xf8,0x10} }, +{ 13, 0x08fb, 0, {0x90,0x7f,0xae,0x74,0x0b,0xf0,0x90,0x7f,0xe2,0x74,0x88,0xf0,0x90} }, +{ 12, 0x0908, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0xe8,0x11,0x75,0x32,0x01,0x75} }, +{ 12, 0x0914, 0, {0x31,0x00,0x75,0x30,0x00,0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7} }, +{ 10, 0x0920, 0, {0xd0,0x05,0xd0,0x04,0x75,0x34,0x00,0x75,0x35,0x01} }, +{ 13, 0x092a, 0, {0x90,0x7f,0xae,0x74,0x03,0xf0,0x8c,0x02,0xba,0x00,0x02,0x80,0x03} }, +{ 3, 0x0937, 0, {0x02,0x0a,0x3f} }, +{ 12, 0x093a, 0, {0x85,0x33,0x34,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90,0x7f,0x97} }, +{ 14, 0x0946, 0, {0x74,0x08,0xf0,0x90,0x7f,0x9d,0x74,0x88,0xf0,0x90,0x7f,0x9a,0xe0,0xfa} }, +{ 12, 0x0954, 0, {0x74,0x05,0x5a,0xf5,0x33,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} }, +{ 13, 0x0960, 0, {0x7f,0x97,0x74,0x02,0xf0,0x90,0x7f,0x9d,0x74,0x82,0xf0,0xe5,0x33} }, +{ 13, 0x096d, 0, {0x25,0xe0,0xfa,0x90,0x7f,0x9a,0xe0,0x54,0x05,0xfb,0x4a,0xf5,0x33} }, +{ 2, 0x097a, 0, {0x60,0x0c} }, +{ 12, 0x097c, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x4a,0xf0} }, +{ 11, 0x0988, 0, {0x75,0x6e,0x00,0x75,0x6f,0x00,0xc0,0x04,0xc0,0x05,0x12} }, +{ 14, 0x0993, 0, {0x11,0x44,0xd0,0x05,0xd0,0x04,0x90,0x17,0x13,0xe0,0xfa,0x74,0x80,0x2a} }, +{ 6, 0x09a1, 0, {0xfa,0xe5,0x33,0xb4,0x04,0x29} }, +{ 3, 0x09a7, 0, {0xba,0xa0,0x00} }, +{ 2, 0x09aa, 0, {0x50,0x24} }, +{ 13, 0x09ac, 0, {0x90,0x17,0x13,0xe0,0x04,0xfb,0x0b,0x90,0x17,0x13,0xeb,0xf0,0x90} }, +{ 14, 0x09b9, 0, {0x17,0x13,0xe0,0xfb,0x90,0x17,0x15,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05} }, +{ 9, 0x09c7, 0, {0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02} }, +{ 5, 0x09d0, 0, {0xe5,0x33,0xb4,0x02,0x26} }, +{ 6, 0x09d5, 0, {0xc3,0x74,0x04,0x9a,0x50,0x20} }, +{ 13, 0x09db, 0, {0x90,0x17,0x13,0xe0,0xfa,0x1a,0x1a,0x90,0x17,0x13,0xea,0xf0,0x90} }, +{ 13, 0x09e8, 0, {0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xf0,0xc0,0x04,0xc0,0x05,0x12} }, +{ 6, 0x09f5, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04} }, +{ 5, 0x09fb, 0, {0xe5,0x33,0xb4,0x08,0x1d} }, +{ 4, 0x0a00, 0, {0xe5,0x34,0x70,0x19} }, +{ 10, 0x0a04, 0, {0x74,0x01,0x25,0x35,0x54,0x0f,0xf5,0x35,0x85,0x35} }, +{ 12, 0x0a0e, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} }, +{ 3, 0x0a1a, 0, {0x05,0xd0,0x04} }, +{ 5, 0x0a1d, 0, {0xe5,0x33,0xb4,0x01,0x1d} }, +{ 4, 0x0a22, 0, {0xe5,0x34,0x70,0x19} }, +{ 10, 0x0a26, 0, {0xe5,0x35,0x24,0xff,0x54,0x0f,0xf5,0x35,0x85,0x35} }, +{ 12, 0x0a30, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} }, +{ 3, 0x0a3c, 0, {0x05,0xd0,0x04} }, +{ 14, 0x0a3f, 0, {0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0,0x04,0x90,0x7f,0x96} }, +{ 14, 0x0a4d, 0, {0xe0,0xfa,0x90,0x7f,0x96,0x74,0x7f,0x5a,0xf0,0x90,0x7f,0x97,0x74,0x08} }, +{ 10, 0x0a5b, 0, {0xf0,0xc3,0xec,0x94,0x00,0xed,0x94,0x02,0x40,0x08} }, +{ 8, 0x0a65, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x20,0xe6,0x08} }, +{ 8, 0x0a6d, 0, {0xc3,0xe4,0x9c,0x74,0x08,0x9d,0x50,0x13} }, +{ 14, 0x0a75, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x40,0x65,0x02,0xf0,0x7c} }, +{ 5, 0x0a83, 0, {0x00,0x7d,0x00,0x80,0x05} }, +{ 5, 0x0a88, 0, {0x0c,0xbc,0x00,0x01,0x0d} }, +{ 5, 0x0a8d, 0, {0xe5,0x38,0xb4,0x01,0x0e} }, +{ 13, 0x0a92, 0, {0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0x75,0x38} }, +{ 1, 0x0a9f, 0, {0x00} }, +{ 7, 0x0aa0, 0, {0xe5,0x31,0x70,0x03,0x02,0x09,0x2a} }, +{ 10, 0x0aa7, 0, {0x90,0x7f,0xc9,0xe0,0xfa,0x70,0x03,0x02,0x0c,0x2d} }, +{ 14, 0x0ab1, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} }, +{ 9, 0x0abf, 0, {0x7d,0xc0,0xe0,0xfa,0xba,0x2c,0x02,0x80,0x03} }, +{ 3, 0x0ac8, 0, {0x02,0x0b,0x36} }, +{ 5, 0x0acb, 0, {0x75,0x32,0x00,0x7b,0x00} }, +{ 3, 0x0ad0, 0, {0xbb,0x64,0x00} }, +{ 2, 0x0ad3, 0, {0x50,0x1c} }, +{ 14, 0x0ad5, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, +{ 13, 0x0ae3, 0, {0x04,0xd0,0x03,0xd0,0x02,0x90,0x88,0x0f,0xe0,0xf5,0x47,0x0b,0x80} }, +{ 1, 0x0af0, 0, {0xdf} }, +{ 13, 0x0af1, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x07,0x1e,0x12,0x03,0xe1,0x12} }, +{ 12, 0x0afe, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x75,0x6e,0x00,0x75} }, +{ 13, 0x0b0a, 0, {0x6f,0x01,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0x44,0xd0,0x05} }, +{ 9, 0x0b17, 0, {0xd0,0x04,0xd0,0x02,0x75,0x70,0x4d,0x75,0x71} }, +{ 11, 0x0b20, 0, {0x0c,0x75,0x72,0x02,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} }, +{ 11, 0x0b2b, 0, {0x11,0x75,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0b36, 0, {0xba,0x2a,0x3b} }, +{ 13, 0x0b39, 0, {0x90,0x7f,0x98,0x74,0x20,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} }, +{ 14, 0x0b46, 0, {0x01,0xdd,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x90,0x7f,0x98,0x74,0x28,0xf0} }, +{ 2, 0x0b54, 0, {0x7b,0x00} }, +{ 3, 0x0b56, 0, {0xbb,0x0a,0x00} }, +{ 5, 0x0b59, 0, {0x40,0x03,0x02,0x0c,0x2d} }, +{ 14, 0x0b5e, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, +{ 8, 0x0b6c, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0b,0x80,0xe2} }, +{ 3, 0x0b74, 0, {0xba,0x2b,0x1a} }, +{ 8, 0x0b77, 0, {0x90,0x7f,0xc9,0xe0,0xfb,0xbb,0x40,0x12} }, +{ 14, 0x0b7f, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x12,0x05,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 4, 0x0b8d, 0, {0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0b91, 0, {0xba,0x10,0x1f} }, +{ 14, 0x0b94, 0, {0x90,0x7f,0x96,0xe0,0xfb,0x90,0x7f,0x96,0x74,0x80,0x65,0x03,0xf0,0xc0} }, +{ 14, 0x0ba2, 0, {0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x3d,0xd0,0x05,0xd0,0x04,0xd0,0x02} }, +{ 3, 0x0bb0, 0, {0x02,0x0c,0x2d} }, +{ 3, 0x0bb3, 0, {0xba,0x11,0x12} }, +{ 14, 0x0bb6, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x6a,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 4, 0x0bc4, 0, {0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0bc8, 0, {0xba,0x12,0x12} }, +{ 14, 0x0bcb, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x8f,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 4, 0x0bd9, 0, {0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0bdd, 0, {0xba,0x13,0x0b} }, +{ 11, 0x0be0, 0, {0x90,0x7d,0xc1,0xe0,0xfb,0x90,0x88,0x00,0xf0,0x80,0x42} }, +{ 3, 0x0beb, 0, {0xba,0x14,0x11} }, +{ 14, 0x0bee, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0xdd,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 3, 0x0bfc, 0, {0x02,0x80,0x2e} }, +{ 3, 0x0bff, 0, {0xba,0x15,0x1d} }, +{ 12, 0x0c02, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x75,0x90,0x7d,0xc2,0xe0,0xf5,0x76} }, +{ 14, 0x0c0e, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 3, 0x0c1c, 0, {0x02,0x80,0x0e} }, +{ 3, 0x0c1f, 0, {0xba,0x16,0x0b} }, +{ 11, 0x0c22, 0, {0xc0,0x04,0xc0,0x05,0x12,0x13,0xa3,0xd0,0x05,0xd0,0x04} }, +{ 11, 0x0c2d, 0, {0x90,0x7f,0xc9,0xe4,0xf0,0x75,0x31,0x00,0x02,0x09,0x2a} }, +{ 1, 0x0c38, 0, {0x22} }, +{ 7, 0x0c39, 0, {0x53,0x55,0x50,0x45,0x4e,0x44,0x00} }, +{ 7, 0x0c40, 0, {0x52,0x45,0x53,0x55,0x4d,0x45,0x00} }, +{ 6, 0x0c47, 0, {0x20,0x56,0x6f,0x6c,0x20,0x00} }, +{ 13, 0x0c4d, 0, {0x44,0x41,0x42,0x55,0x53,0x42,0x20,0x76,0x31,0x2e,0x30,0x30,0x00} }, +{ 14, 0x0c5a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x0c68, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 13, 0x0c76, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, +{ 14, 0x0c83, 0, {0x7f,0xab,0x74,0x01,0xf0,0x90,0x7f,0xe8,0xe0,0xfa,0x90,0x7f,0xe9,0xe0} }, +{ 6, 0x0c91, 0, {0xfb,0xbb,0x00,0x02,0x80,0x03} }, +{ 3, 0x0c97, 0, {0x02,0x0d,0x38} }, +{ 3, 0x0c9a, 0, {0xba,0x80,0x14} }, +{ 14, 0x0c9d, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5} }, +{ 6, 0x0cab, 0, {0x74,0x02,0xf0,0x02,0x0e,0xcd} }, +{ 5, 0x0cb1, 0, {0xba,0x82,0x02,0x80,0x03} }, +{ 3, 0x0cb6, 0, {0x02,0x0d,0x1d} }, +{ 8, 0x0cb9, 0, {0x90,0x7f,0xec,0xe0,0xfc,0xbc,0x01,0x00} }, +{ 2, 0x0cc1, 0, {0x40,0x21} }, +{ 6, 0x0cc3, 0, {0xc3,0x74,0x07,0x9c,0x40,0x1b} }, +{ 14, 0x0cc9, 0, {0xec,0x24,0xff,0x25,0xe0,0xfd,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} }, +{ 13, 0x0cd7, 0, {0x83,0xe0,0xfd,0x53,0x05,0x01,0x90,0x7f,0x00,0xed,0xf0,0x80,0x2b} }, +{ 3, 0x0ce4, 0, {0xbc,0x81,0x00} }, +{ 2, 0x0ce7, 0, {0x40,0x21} }, +{ 6, 0x0ce9, 0, {0xc3,0x74,0x87,0x9c,0x40,0x1b} }, +{ 14, 0x0cef, 0, {0xec,0x24,0x7f,0x25,0xe0,0xfc,0x24,0xb6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} }, +{ 13, 0x0cfd, 0, {0x83,0xe0,0xfc,0x53,0x04,0x01,0x90,0x7f,0x00,0xec,0xf0,0x80,0x05} }, +{ 5, 0x0d0a, 0, {0x90,0x7f,0x00,0xe4,0xf0} }, +{ 14, 0x0d0f, 0, {0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74,0x02,0xf0,0x02,0x0e,0xcd} }, +{ 5, 0x0d1d, 0, {0xba,0x81,0x02,0x80,0x03} }, +{ 3, 0x0d22, 0, {0x02,0x0e,0xc5} }, +{ 14, 0x0d25, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74} }, +{ 5, 0x0d33, 0, {0x02,0xf0,0x02,0x0e,0xcd} }, +{ 3, 0x0d38, 0, {0xbb,0x01,0x2d} }, +{ 6, 0x0d3b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} }, +{ 3, 0x0d41, 0, {0xba,0x02,0x11} }, +{ 13, 0x0d44, 0, {0x75,0x59,0x00,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} }, +{ 4, 0x0d51, 0, {0x02,0x02,0x0e,0xcd} }, +{ 5, 0x0d55, 0, {0xba,0x21,0x02,0x80,0x03} }, +{ 3, 0x0d5a, 0, {0x02,0x0e,0xcd} }, +{ 11, 0x0d5d, 0, {0x75,0x37,0x01,0x90,0x7f,0xc5,0xe4,0xf0,0x02,0x0e,0xcd} }, +{ 3, 0x0d68, 0, {0xbb,0x03,0x1f} }, +{ 6, 0x0d6b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} }, +{ 5, 0x0d71, 0, {0xba,0x02,0x02,0x80,0x03} }, +{ 3, 0x0d76, 0, {0x02,0x0e,0xcd} }, +{ 13, 0x0d79, 0, {0x75,0x59,0x01,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} }, +{ 4, 0x0d86, 0, {0x02,0x02,0x0e,0xcd} }, +{ 3, 0x0d8a, 0, {0xbb,0x06,0x54} }, +{ 5, 0x0d8d, 0, {0xba,0x80,0x02,0x80,0x03} }, +{ 3, 0x0d92, 0, {0x02,0x0e,0xc5} }, +{ 8, 0x0d95, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x01,0x15} }, +{ 12, 0x0d9d, 0, {0x7c,0xfb,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} }, +{ 9, 0x0da9, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} }, +{ 10, 0x0db2, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x02,0x02,0x80,0x03} }, +{ 3, 0x0dbc, 0, {0x02,0x0e,0xc5} }, +{ 10, 0x0dbf, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x02,0x80,0x03} }, +{ 3, 0x0dc9, 0, {0x02,0x0e,0xc5} }, +{ 12, 0x0dcc, 0, {0x7c,0x3b,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} }, +{ 9, 0x0dd8, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} }, +{ 6, 0x0de1, 0, {0xbb,0x07,0x03,0x02,0x0e,0xc5} }, +{ 3, 0x0de7, 0, {0xbb,0x08,0x10} }, +{ 13, 0x0dea, 0, {0xac,0x48,0x90,0x7f,0x00,0xec,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} }, +{ 3, 0x0df7, 0, {0x02,0x0e,0xcd} }, +{ 3, 0x0dfa, 0, {0xbb,0x09,0x31} }, +{ 5, 0x0dfd, 0, {0xba,0x00,0x02,0x80,0x03} }, +{ 3, 0x0e02, 0, {0x02,0x0e,0xc5} }, +{ 14, 0x0e05, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xc3,0x74,0x01,0x9c,0x50,0x03,0x02,0x0e,0xc5} }, +{ 8, 0x0e13, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x0a} }, +{ 10, 0x0e1b, 0, {0x90,0x17,0x21,0xe4,0xf0,0x90,0x17,0x22,0xe4,0xf0} }, +{ 9, 0x0e25, 0, {0x90,0x7f,0xea,0xe0,0xf5,0x48,0x02,0x0e,0xcd} }, +{ 3, 0x0e2e, 0, {0xbb,0x0a,0x27} }, +{ 5, 0x0e31, 0, {0xba,0x81,0x02,0x80,0x03} }, +{ 3, 0x0e36, 0, {0x02,0x0e,0xc5} }, +{ 14, 0x0e39, 0, {0x90,0x7f,0xec,0xe0,0xfa,0x24,0x20,0xfa,0xe4,0x34,0x17,0xfc,0x8a,0x82} }, +{ 14, 0x0e47, 0, {0x8c,0x83,0xe0,0xfa,0x90,0x7f,0x00,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} }, +{ 3, 0x0e55, 0, {0x02,0x0e,0xcd} }, +{ 5, 0x0e58, 0, {0xbb,0x0b,0x02,0x80,0x03} }, +{ 3, 0x0e5d, 0, {0x02,0x0e,0xa9} }, +{ 13, 0x0e60, 0, {0x90,0x17,0x20,0xe4,0xf0,0x90,0x7f,0xec,0xe0,0xfa,0xba,0x01,0x1a} }, +{ 8, 0x0e6d, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x12} }, +{ 14, 0x0e75, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x90,0x17,0x21,0xf0,0xc0,0x03,0x12,0x04,0xe2} }, +{ 4, 0x0e83, 0, {0xd0,0x03,0x80,0x46} }, +{ 8, 0x0e87, 0, {0x90,0x7f,0xec,0xe0,0xfa,0xba,0x02,0x3e} }, +{ 8, 0x0e8f, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x36} }, +{ 13, 0x0e97, 0, {0xc0,0x03,0x12,0x04,0xef,0xd0,0x03,0x90,0x7f,0xea,0xe0,0xfa,0x90} }, +{ 5, 0x0ea4, 0, {0x17,0x22,0xf0,0x80,0x24} }, +{ 5, 0x0ea9, 0, {0xbb,0x12,0x02,0x80,0x17} }, +{ 5, 0x0eae, 0, {0xbb,0x81,0x02,0x80,0x0d} }, +{ 5, 0x0eb3, 0, {0xbb,0x83,0x02,0x80,0x08} }, +{ 5, 0x0eb8, 0, {0xbb,0x82,0x02,0x80,0x03} }, +{ 3, 0x0ebd, 0, {0xbb,0x84,0x05} }, +{ 5, 0x0ec0, 0, {0x12,0x06,0x4e,0x80,0x08} }, +{ 8, 0x0ec5, 0, {0x90,0x7f,0xb4,0x74,0x03,0xf0,0x80,0x06} }, +{ 6, 0x0ecd, 0, {0x90,0x7f,0xb4,0x74,0x02,0xf0} }, +{ 2, 0x0ed3, 0, {0xd0,0x86} }, +{ 14, 0x0ed5, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x0ee3, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 11, 0x0ef0, 0, {0x90,0x7f,0xec,0xe0,0xf5,0x5a,0xc3,0x94,0x01,0x40,0x1d} }, +{ 7, 0x0efb, 0, {0xc3,0x74,0x07,0x95,0x5a,0x40,0x16} }, +{ 13, 0x0f02, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xc6,0xf5,0x82,0xe4,0x34} }, +{ 9, 0x0f0f, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0,0x80,0x22} }, +{ 7, 0x0f18, 0, {0xc3,0xe5,0x5a,0x94,0x81,0x40,0x1b} }, +{ 7, 0x0f1f, 0, {0xc3,0x74,0x87,0x95,0x5a,0x40,0x14} }, +{ 13, 0x0f26, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xb6,0xf5,0x82,0xe4,0x34} }, +{ 7, 0x0f33, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0} }, +{ 1, 0x0f3a, 0, {0x22} }, +{ 14, 0x0f3b, 0, {0x09,0x02,0xba,0x00,0x03,0x01,0x00,0x40,0x00,0x09,0x04,0x00,0x00,0x00} }, +{ 14, 0x0f49, 0, {0x01,0x01,0x00,0x00,0x09,0x24,0x01,0x00,0x01,0x3d,0x00,0x01,0x01,0x0c} }, +{ 14, 0x0f57, 0, {0x24,0x02,0x01,0x10,0x07,0x00,0x02,0x03,0x00,0x00,0x00,0x0d,0x24,0x06} }, +{ 14, 0x0f65, 0, {0x03,0x01,0x02,0x15,0x00,0x03,0x00,0x03,0x00,0x00,0x09,0x24,0x03,0x02} }, +{ 14, 0x0f73, 0, {0x01,0x01,0x00,0x01,0x00,0x09,0x24,0x03,0x04,0x02,0x03,0x00,0x03,0x00} }, +{ 14, 0x0f81, 0, {0x09,0x24,0x03,0x05,0x03,0x06,0x00,0x01,0x00,0x09,0x04,0x01,0x00,0x00} }, +{ 14, 0x0f8f, 0, {0x01,0x02,0x00,0x00,0x09,0x04,0x01,0x01,0x01,0x01,0x02,0x00,0x00,0x07} }, +{ 14, 0x0f9d, 0, {0x24,0x01,0x02,0x01,0x01,0x00,0x0b,0x24,0x02,0x01,0x02,0x02,0x10,0x01} }, +{ 14, 0x0fab, 0, {0x80,0xbb,0x00,0x09,0x05,0x88,0x05,0x00,0x01,0x01,0x00,0x00,0x07,0x25} }, +{ 14, 0x0fb9, 0, {0x01,0x00,0x00,0x00,0x00,0x09,0x04,0x02,0x00,0x02,0x00,0x00,0x00,0x00} }, +{ 14, 0x0fc7, 0, {0x07,0x05,0x82,0x02,0x40,0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00} }, +{ 14, 0x0fd5, 0, {0x09,0x04,0x02,0x01,0x03,0x00,0x00,0x00,0x00,0x07,0x05,0x82,0x02,0x40} }, +{ 14, 0x0fe3, 0, {0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00,0x09,0x05,0x89,0x05,0xa0} }, +{ 10, 0x0ff1, 0, {0x01,0x01,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0x00} }, +{ 14, 0x0ffb, 0, {0x12,0x01,0x00,0x01,0x00,0x00,0x00,0x40,0x47,0x05,0x99,0x99,0x00,0x01} }, +{ 14, 0x1009, 0, {0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x02,0xba} }, +{ 4, 0x1017, 0, {0x00,0x03,0x01,0x00} }, +{ 2, 0x101b, 0, {0x7a,0x00} }, +{ 3, 0x101d, 0, {0xba,0x05,0x00} }, +{ 2, 0x1020, 0, {0x50,0x17} }, +{ 8, 0x1022, 0, {0x90,0x7f,0xa5,0xe0,0xfb,0x30,0xe0,0x05} }, +{ 5, 0x102a, 0, {0x90,0x00,0x01,0x80,0x0d} }, +{ 10, 0x102f, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xe4} }, +{ 3, 0x1039, 0, {0x90,0x00,0x01} }, +{ 1, 0x103c, 0, {0x22} }, +{ 14, 0x103d, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0x00,0x7d} }, +{ 4, 0x104b, 0, {0x7e,0xeb,0x60,0x12} }, +{ 14, 0x104f, 0, {0x89,0x82,0x8a,0x83,0xe0,0xa3,0xa9,0x82,0xaa,0x83,0x8c,0x82,0x8d,0x83} }, +{ 4, 0x105d, 0, {0xf0,0x0c,0xdb,0xee} }, +{ 8, 0x1061, 0, {0x90,0x7d,0xc3,0xe0,0x90,0x7f,0xb9,0xf0} }, +{ 1, 0x1069, 0, {0x22} }, +{ 14, 0x106a, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0xc4,0x7d} }, +{ 4, 0x1078, 0, {0x7d,0xeb,0x60,0xe5} }, +{ 14, 0x107c, 0, {0x8c,0x82,0x8d,0x83,0xe0,0x0c,0x89,0x82,0x8a,0x83,0xf0,0xa3,0xa9,0x82} }, +{ 4, 0x108a, 0, {0xaa,0x83,0xdb,0xee} }, +{ 1, 0x108e, 0, {0x22} }, +{ 14, 0x108f, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x05,0x86,0x90,0x7d,0xc1,0xe0,0x05,0x86} }, +{ 14, 0x109d, 0, {0xa3,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0x05,0x86,0xa3,0xa3,0xe0,0xf9} }, +{ 5, 0x10ab, 0, {0x60,0x16,0xa3,0x05,0x86} }, +{ 13, 0x10b0, 0, {0x90,0x7f,0xa6,0x05,0x86,0xe0,0xa3,0x05,0x86,0xf0,0xc0,0x01,0x12} }, +{ 6, 0x10bd, 0, {0x10,0x1b,0xd0,0x01,0xd9,0xed} }, +{ 6, 0x10c3, 0, {0x90,0x7f,0xa5,0x74,0x40,0xf0} }, +{ 1, 0x10c9, 0, {0x22} }, +{ 8, 0x10ca, 0, {0x90,0x88,0x02,0x74,0x01,0xf0,0x7a,0x00} }, +{ 3, 0x10d2, 0, {0xba,0xff,0x00} }, +{ 2, 0x10d5, 0, {0x50,0x0a} }, +{ 10, 0x10d7, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} }, +{ 1, 0x10e1, 0, {0x22} }, +{ 5, 0x10e2, 0, {0xe5,0x6b,0xb4,0xc0,0x08} }, +{ 8, 0x10e7, 0, {0x90,0x88,0x03,0xe5,0x6c,0xf0,0x80,0x06} }, +{ 6, 0x10ef, 0, {0x90,0x88,0x02,0xe5,0x6c,0xf0} }, +{ 4, 0x10f5, 0, {0x7a,0x00,0x7b,0x00} }, +{ 11, 0x10f9, 0, {0xc3,0xea,0x94,0x32,0xeb,0x64,0x80,0x94,0x80,0x50,0x07} }, +{ 5, 0x1104, 0, {0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x1109, 0, {0x80,0xee} }, +{ 1, 0x110b, 0, {0x22} }, +{ 10, 0x110c, 0, {0x90,0x88,0x03,0xe5,0x6d,0xf0,0x05,0x39,0x7a,0x00} }, +{ 3, 0x1116, 0, {0xba,0x28,0x00} }, +{ 2, 0x1119, 0, {0x50,0x03} }, +{ 3, 0x111b, 0, {0x0a,0x80,0xf8} }, +{ 5, 0x111e, 0, {0xe5,0x39,0xb4,0x10,0x08} }, +{ 8, 0x1123, 0, {0x90,0x88,0x02,0x74,0xc0,0xf0,0x80,0x0e} }, +{ 5, 0x112b, 0, {0xe5,0x39,0xb4,0x20,0x09} }, +{ 9, 0x1130, 0, {0x90,0x88,0x02,0x74,0x80,0xf0,0x75,0x39,0x00} }, +{ 2, 0x1139, 0, {0x7a,0x00} }, +{ 3, 0x113b, 0, {0xba,0x28,0x00} }, +{ 2, 0x113e, 0, {0x50,0x03} }, +{ 3, 0x1140, 0, {0x0a,0x80,0xf8} }, +{ 1, 0x1143, 0, {0x22} }, +{ 4, 0x1144, 0, {0xe5,0x6f,0x60,0x02} }, +{ 2, 0x1148, 0, {0x80,0x07} }, +{ 7, 0x114a, 0, {0x7a,0x00,0x75,0x39,0x00,0x80,0x05} }, +{ 5, 0x1151, 0, {0x7a,0x40,0x75,0x39,0x10} }, +{ 9, 0x1156, 0, {0xe5,0x6e,0x2a,0xfa,0xe5,0x6e,0x25,0x39,0xf5} }, +{ 10, 0x115f, 0, {0x39,0x90,0x88,0x02,0x74,0x80,0x2a,0xf0,0x7a,0x00} }, +{ 8, 0x1169, 0, {0xc3,0xea,0x64,0x80,0x94,0xa8,0x50,0x03} }, +{ 3, 0x1171, 0, {0x0a,0x80,0xf5} }, +{ 1, 0x1174, 0, {0x22} }, +{ 6, 0x1175, 0, {0xaa,0x70,0xab,0x71,0xac,0x72} }, +{ 12, 0x117b, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x12,0x14,0xee,0xfd,0x60,0x18} }, +{ 13, 0x1187, 0, {0x8d,0x6d,0xc0,0x02,0xc0,0x03,0xc0,0x04,0x12,0x11,0x0c,0xd0,0x04} }, +{ 9, 0x1194, 0, {0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x119d, 0, {0x80,0xdc} }, +{ 1, 0x119f, 0, {0x22} }, +{ 13, 0x11a0, 0, {0xe5,0x73,0xc4,0x54,0x0f,0xfa,0x53,0x02,0x0f,0xc3,0x74,0x09,0x9a} }, +{ 2, 0x11ad, 0, {0x50,0x06} }, +{ 6, 0x11af, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} }, +{ 4, 0x11b5, 0, {0x74,0x30,0x2a,0xfb} }, +{ 12, 0x11b9, 0, {0x8b,0x6d,0xc0,0x03,0x12,0x11,0x0c,0xd0,0x03,0xaa,0x73,0x53} }, +{ 8, 0x11c5, 0, {0x02,0x0f,0xc3,0x74,0x09,0x9a,0x50,0x06} }, +{ 6, 0x11cd, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} }, +{ 4, 0x11d3, 0, {0x74,0x30,0x2a,0xfb} }, +{ 5, 0x11d7, 0, {0x8b,0x6d,0x12,0x11,0x0c} }, +{ 1, 0x11dc, 0, {0x22} }, +{ 7, 0x11dd, 0, {0x90,0x7d,0xc3,0xe0,0xfa,0x60,0x0f} }, +{ 12, 0x11e4, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x6e,0x90,0x7d,0xc2,0xe0,0xf5,0x6f} }, +{ 3, 0x11f0, 0, {0x12,0x11,0x44} }, +{ 12, 0x11f3, 0, {0x90,0x7d,0xff,0xe4,0xf0,0x75,0x70,0xc4,0x75,0x71,0x7d,0x75} }, +{ 5, 0x11ff, 0, {0x72,0x01,0x12,0x11,0x75} }, +{ 1, 0x1204, 0, {0x22} }, +{ 2, 0x1205, 0, {0x7a,0x04} }, +{ 3, 0x1207, 0, {0xba,0x40,0x00} }, +{ 2, 0x120a, 0, {0x50,0x36} }, +{ 14, 0x120c, 0, {0xea,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfb,0x7c,0x00} }, +{ 3, 0x121a, 0, {0xbc,0x08,0x00} }, +{ 2, 0x121d, 0, {0x50,0x20} }, +{ 6, 0x121f, 0, {0x8b,0x05,0xed,0x30,0xe7,0x0b} }, +{ 11, 0x1225, 0, {0x90,0x7f,0x96,0x74,0x42,0xf0,0x74,0xc3,0xf0,0x80,0x08} }, +{ 8, 0x1230, 0, {0x90,0x7f,0x96,0xe4,0xf0,0x74,0x81,0xf0} }, +{ 7, 0x1238, 0, {0xeb,0x25,0xe0,0xfb,0x0c,0x80,0xdb} }, +{ 3, 0x123f, 0, {0x0a,0x80,0xc5} }, +{ 1, 0x1242, 0, {0x22} }, +{ 4, 0x1243, 0, {0x7a,0x00,0x7b,0xef} }, +{ 3, 0x1247, 0, {0xba,0x10,0x00} }, +{ 2, 0x124a, 0, {0x50,0x20} }, +{ 14, 0x124c, 0, {0x74,0x11,0x2b,0xfb,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0x8c,0x82,0x8d} }, +{ 14, 0x125a, 0, {0x83,0xe4,0xf0,0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe4} }, +{ 4, 0x1268, 0, {0xf0,0x0a,0x80,0xdb} }, +{ 1, 0x126c, 0, {0x22} }, +{ 14, 0x126d, 0, {0x74,0xf8,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x127b, 0, {0x74,0xf9,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x1289, 0, {0x74,0xfa,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x1297, 0, {0x74,0xfb,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x12a5, 0, {0x74,0xff,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 1, 0x12b3, 0, {0x22} }, +{ 14, 0x12b4, 0, {0x12,0x03,0xcb,0x12,0x12,0x6d,0x7a,0xc0,0x7b,0x87,0x7c,0x01,0x74,0x01} }, +{ 14, 0x12c2, 0, {0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74} }, +{ 14, 0x12d0, 0, {0x01,0x12,0x14,0xbf,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e} }, +{ 14, 0x12de, 0, {0x83,0x8f,0xf0,0x74,0x06,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b} }, +{ 14, 0x12ec, 0, {0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74} }, +{ 14, 0x12fa, 0, {0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0} }, +{ 14, 0x1308, 0, {0x74,0x0b,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07} }, +{ 14, 0x1316, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74,0x08,0x12,0x14,0xbf,0x74,0x01,0x2d} }, +{ 14, 0x1324, 0, {0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x01} }, +{ 14, 0x1332, 0, {0x12,0x14,0xbf,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83} }, +{ 14, 0x1340, 0, {0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74,0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f} }, +{ 14, 0x134e, 0, {0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x03,0x12,0x14,0xbf,0x7d,0x00} }, +{ 3, 0x135c, 0, {0xbd,0x06,0x00} }, +{ 2, 0x135f, 0, {0x50,0x12} }, +{ 11, 0x1361, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x0a,0xba,0x00,0x01,0x0b} }, +{ 7, 0x136c, 0, {0xe4,0x12,0x14,0xbf,0x0d,0x80,0xe9} }, +{ 13, 0x1373, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe5,0x74,0x12,0x14,0xbf,0x74,0xf9} }, +{ 14, 0x1380, 0, {0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x0f,0xf0,0x74} }, +{ 14, 0x138e, 0, {0xfe,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x01,0xf0} }, +{ 6, 0x139c, 0, {0x12,0x03,0xe1,0x12,0x04,0xf7} }, +{ 1, 0x13a2, 0, {0x22} }, +{ 13, 0x13a3, 0, {0x90,0x7d,0xc1,0xe0,0xfa,0x24,0x00,0xfb,0xe4,0x34,0x19,0xfc,0x90} }, +{ 14, 0x13b0, 0, {0x7d,0xc2,0xe0,0xfd,0x8b,0x82,0x8c,0x83,0xf0,0x75,0xf0,0x11,0xea,0xa4} }, +{ 3, 0x13be, 0, {0xfa,0x7b,0x00} }, +{ 3, 0x13c1, 0, {0xbb,0x10,0x00} }, +{ 2, 0x13c4, 0, {0x50,0x24} }, +{ 14, 0x13c6, 0, {0xea,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0xeb,0x2c,0xfc,0xe4,0x3d,0xfd} }, +{ 14, 0x13d4, 0, {0x74,0x04,0x2b,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfe} }, +{ 8, 0x13e2, 0, {0x8c,0x82,0x8d,0x83,0xf0,0x0b,0x80,0xd7} }, +{ 14, 0x13ea, 0, {0xea,0x24,0x00,0xfa,0xe4,0x34,0x18,0xfb,0x74,0x10,0x2a,0xf5,0x82,0xe4} }, +{ 5, 0x13f8, 0, {0x3b,0xf5,0x83,0xe4,0xf0} }, +{ 1, 0x13fd, 0, {0x22} }, +{ 4, 0x13fe, 0, {0xe5,0x76,0x60,0x02} }, +{ 2, 0x1402, 0, {0x80,0x16} }, +{ 12, 0x1404, 0, {0x74,0x0f,0x55,0x75,0xfa,0x8a,0x75,0x24,0x00,0xf5,0x82,0xe4} }, +{ 10, 0x1410, 0, {0x34,0x19,0xf5,0x83,0xe0,0xf5,0x74,0x12,0x12,0xb4} }, +{ 10, 0x141a, 0, {0x12,0x10,0xca,0x75,0x6e,0x00,0x75,0x6f,0x00,0x12} }, +{ 6, 0x1424, 0, {0x11,0x44,0x75,0x70,0xb9,0x75} }, +{ 6, 0x142a, 0, {0x71,0x14,0x75,0x72,0x02,0x12} }, +{ 11, 0x1430, 0, {0x11,0x75,0xe5,0x76,0xb4,0x02,0x04,0x74,0x01,0x80,0x01} }, +{ 1, 0x143b, 0, {0xe4} }, +{ 3, 0x143c, 0, {0xfa,0x70,0x0f} }, +{ 12, 0x143f, 0, {0x74,0x01,0x25,0x75,0xf5,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0} }, +{ 3, 0x144b, 0, {0x02,0x80,0x0a} }, +{ 10, 0x144e, 0, {0x85,0x75,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0,0x02} }, +{ 12, 0x1458, 0, {0x75,0x6e,0x00,0x75,0x6f,0x01,0xc0,0x02,0x12,0x11,0x44,0xd0} }, +{ 4, 0x1464, 0, {0x02,0xea,0x70,0x1a} }, +{ 13, 0x1468, 0, {0x75,0xf0,0x11,0xe5,0x75,0xa4,0xfa,0x24,0x00,0xfa,0xe4,0x34,0x18} }, +{ 9, 0x1475, 0, {0xfb,0x8a,0x70,0x8b,0x71,0x75,0x72,0x01,0x12} }, +{ 4, 0x147e, 0, {0x11,0x75,0x80,0x36} }, +{ 2, 0x1482, 0, {0x7a,0x00} }, +{ 3, 0x1484, 0, {0xba,0x10,0x00} }, +{ 2, 0x1487, 0, {0x50,0x2f} }, +{ 13, 0x1489, 0, {0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe0,0xfb,0xe5} }, +{ 4, 0x1496, 0, {0x75,0xb5,0x03,0x1b} }, +{ 14, 0x149a, 0, {0x75,0xf0,0x11,0xea,0xa4,0xfb,0x24,0x00,0xfb,0xe4,0x34,0x18,0xfc,0x8b} }, +{ 9, 0x14a8, 0, {0x70,0x8c,0x71,0x75,0x72,0x01,0xc0,0x02,0x12} }, +{ 4, 0x14b1, 0, {0x11,0x75,0xd0,0x02} }, +{ 3, 0x14b5, 0, {0x0a,0x80,0xcc} }, +{ 1, 0x14b8, 0, {0x22} }, +{ 6, 0x14b9, 0, {0x50,0x72,0x6f,0x67,0x20,0x00} }, +{ 14, 0x14bf, 0, {0xc8,0xc0,0xe0,0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0b,0x14,0x60,0x0f,0x14} }, +{ 7, 0x14cd, 0, {0x60,0x11,0x14,0x60,0x12,0x80,0x15} }, +{ 7, 0x14d4, 0, {0xd0,0xe0,0xa8,0x82,0xf6,0x80,0x0e} }, +{ 5, 0x14db, 0, {0xd0,0xe0,0xf0,0x80,0x09} }, +{ 4, 0x14e0, 0, {0xd0,0xe0,0x80,0x05} }, +{ 5, 0x14e4, 0, {0xd0,0xe0,0xa8,0x82,0xf2} }, +{ 4, 0x14e9, 0, {0xc8,0xd0,0xe0,0xc8} }, +{ 1, 0x14ed, 0, {0x22} }, +{ 14, 0x14ee, 0, {0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0d,0x14,0x60,0x0f,0x14,0x60,0x0f,0x14} }, +{ 6, 0x14fc, 0, {0x60,0x10,0x74,0xff,0x80,0x0f} }, +{ 5, 0x1502, 0, {0xa8,0x82,0xe6,0x80,0x0a} }, +{ 3, 0x1507, 0, {0xe0,0x80,0x07} }, +{ 4, 0x150a, 0, {0xe4,0x93,0x80,0x03} }, +{ 3, 0x150e, 0, {0xa8,0x82,0xe2} }, +{ 4, 0x1511, 0, {0xf8,0xd0,0xe0,0xc8} }, +{ 1, 0x1515, 0, {0x22} }, +{ 0, 0x0000, 1, {0} } + +}; + +static unsigned char bitstream[] = { + +0x00,0x09,0x0F,0xF0,0x0F,0xF0,0x0F,0xF0, 0x0F,0xF0,0x00,0x00,0x01,0x61,0x00,0x0D, +0x64,0x61,0x62,0x75,0x73,0x62,0x74,0x72, 0x2E,0x6E,0x63,0x64,0x00,0x62,0x00,0x0B, +0x73,0x31,0x30,0x78,0x6C,0x76,0x71,0x31, 0x30,0x30,0x00,0x63,0x00,0x0B,0x31,0x39, +0x39,0x39,0x2F,0x30,0x39,0x2F,0x32,0x34, 0x00,0x64,0x00,0x09,0x31,0x30,0x3A,0x34, +0x32,0x3A,0x34,0x36,0x00,0x65,0x00,0x00, 0x2E,0xC0,0xFF,0x20,0x17,0x5F,0x9F,0x5B, +0xFE,0xFB,0xBB,0xB7,0xBB,0xBB,0xFB,0xBF, 0xAF,0xEF,0xFB,0xDF,0xB7,0xFB,0xFB,0x7F, +0xBF,0xB7,0xEF,0xF2,0xFF,0xFB,0xFE,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xBF,0xFF,0xFF, +0xFF,0xFF,0xAF,0xFF,0xFA,0xFF,0xFF,0xFF, 0xC9,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xA3,0xFF,0xFB, +0xFE,0xFF,0xBF,0xEF,0xE3,0xFE,0xFF,0xBF, 0xE3,0xFE,0xFF,0xBF,0x6F,0xFB,0xF6,0xFF, +0xBF,0xFF,0x47,0xFF,0xFF,0x9F,0xEE,0xF9, 0xFE,0xCF,0x9F,0xEF,0xFB,0xCF,0x9B,0xEE, +0xF8,0xFE,0xEF,0x8F,0xEE,0xFB,0xFE,0x0B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xBF,0xFF,0xFF,0xFB,0xFF,0xFF, 0xBF,0xFF,0xFF,0xFC,0x17,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFB,0xFF,0xFF,0x7F,0xFF,0xFF, +0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x5F,0xFF, 0xFF,0xFD,0xFF,0xFF,0xDB,0xFF,0xFD,0xFF, +0x77,0xFF,0xFD,0xFF,0xFF,0xDF,0xFE,0xFD, 0xFF,0xFF,0xF2,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1, +0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xE3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, +0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x67,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0x7F,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xDF,0xFF,0xFF,0xFF,0x2F,0xFF, +0xF3,0xFD,0xFF,0x7F,0xDE,0xF7,0xFD,0xFF, 0x7F,0xF7,0x7D,0xFF,0x7F,0xDF,0xF7,0xBD, +0xFF,0x7F,0xFF,0x1F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xEF,0xFB, +0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, 0x3F,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F, +0x9F,0xE7,0xFA,0x7F,0x9F,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xFF,0xFC,0x7F,0xBF,0xBF, +0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xB7, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, +0xFF,0xE0,0xFD,0xF9,0xFE,0x7F,0x9F,0xE7, 0xF9,0xFE,0x7F,0x9D,0xF9,0xFE,0x7D,0x9D, +0xE7,0xF9,0xFE,0x7F,0x9F,0xED,0xED,0xFF, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, +0xDF,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF, 0x7F,0xDF,0xFF,0x9B,0xFF,0xEF,0xFB,0xFE, +0xFB,0xBF,0xEF,0xBB,0xFE,0xFF,0xAF,0xBB, 0xBE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, +0xB7,0xBF,0xDB,0xF6,0xBD,0xBF,0x6B,0xDB, 0xF6,0xF9,0xBF,0x5B,0xD6,0xF9,0xBF,0x6F, +0xDB,0xF6,0xFD,0xBF,0xFF,0x0E,0xFF,0xFF, 0xFF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0x7F, +0xF7,0xBD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xDF,0x9F,0xFF,0xFF,0xFF,0xFE,0xFF, +0xFF,0xEF,0xFE,0xFE,0xFF,0xFF,0x77,0xFF, 0xFB,0xFB,0xFF,0xFF,0xFF,0xFF,0xF8,0x3F, +0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xF4,0x7F,0xFF,0xFE,0xFD, 0xBE,0xFF,0xDF,0xFE,0xFF,0xFF,0xEF,0x7F, +0xFF,0xCF,0xFF,0xCF,0xFF,0xFF,0xFF,0xDF, 0xE6,0xFF,0xFF,0x7F,0xDF,0xF7,0xDD,0x7F, +0x7F,0xDF,0xF7,0xFF,0x7F,0xDF,0xD7,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFF,0xCD,0xFF,0xF2, +0xFF,0xFF,0x4F,0x7F,0xF4,0xFF,0xFF,0xFF, 0xE7,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xBB,0xFF,0xEF,0xFF,0xFE,0xFF, 0xFF,0xFF,0xEF,0xFF,0xFF,0xEF,0xFF,0xFB, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x65, 0xEF,0xFF,0xFF,0x7F,0xFF,0xFD,0xEF,0xFF, +0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xCF,0xDF,0xFE,0xFF, +0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xF3,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFE,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xEF,0xEB,0xFF,0xFE,0xBF,0xFF, 0xEB,0xFF,0xFC,0x7F,0xFF,0xFF,0xFF,0xEE, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xD6,0xFF,0xFD,0xBF,0xFF,0xFB,0xFF,0xFE, +0xFD,0xFF,0xFF,0xFD,0xEF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xDE,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0x7F,0xBF, 0xFF,0x5F,0xDF,0xFF,0xFF,0xBF,0x77,0xFF, +0xFF,0xFF,0x7F,0xD7,0xFF,0xFF,0xFF,0xFF, 0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xDF,0xEF, +0xFF,0xFF,0xFE,0xFB,0xFF,0xFF,0xDF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xB7,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xAF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xBF,0xDF,0xF3,0xFD,0xFB,0xFF,0x5B, +0xFD,0xFF,0xBF,0xEF,0xF7,0xFF,0xFF,0x7D, 0xFF,0xFF,0xFF,0xFF,0xF8,0x3B,0xFF,0xBF, +0x6F,0xFF,0xFE,0xFF,0xBF,0xFF,0xEB,0x7D, 0xFF,0xEF,0xFB,0xFE,0xFF,0xFF,0xFF,0xFF, +0xFF,0xF2,0x7F,0xFC,0xFF,0x3F,0xDF,0xED, 0xFE,0xFF,0xFF,0xFF,0xFF,0xEF,0x5F,0xF7, +0xB5,0xFF,0xEF,0xFF,0xFF,0xFF,0xE0,0x3F, 0x9F,0x9E,0xFF,0xFF,0xEF,0xFF,0xDF,0xFF, +0xBF,0x5F,0xBF,0xCF,0xF3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x69,0xAF,0x33,0xFD,0xFF, +0xFB,0xFF,0xFF,0xFF,0xFF,0xFC,0xFF,0x7F, 0xD9,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xF5, +0xA3,0xDF,0x6E,0xDE,0xFF,0xFF,0xBD,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFE,0xE7,0xFD, +0xFF,0xFF,0xFF,0xF9,0xEF,0xC6,0xFE,0xB7, 0xAD,0xE5,0xF9,0xFF,0xFF,0xFF,0xCF,0xFF, +0xFF,0xFF,0xCD,0xFB,0x7F,0xFF,0xFF,0xFF, 0xF9,0xF6,0x0F,0xDF,0xEC,0xCF,0x7F,0xFF, +0xFB,0x7F,0xFF,0xFF,0xFF,0xFD,0xFF,0xFE, 0xF9,0xFD,0x7F,0xFF,0x7F,0xFF,0xF9,0x5B, +0xFF,0x73,0xDC,0xFD,0x7B,0xDF,0xFF,0xFF, 0xFF,0x7B,0xFF,0xFF,0xF7,0x53,0xD6,0xFF, +0xFF,0xFF,0xFF,0xD8,0x9F,0xFE,0xFF,0xEF, 0x7F,0xEE,0xFF,0xFF,0xFF,0xFB,0xED,0xED, +0xFD,0xFF,0xFE,0xFF,0xFF,0xFB,0x7F,0xFF, 0xE2,0x7F,0xFF,0x6F,0xD8,0x57,0xF7,0xFF, +0xFF,0xFF,0xDF,0xFF,0xE8,0xFF,0xFF,0xFD, 0xFF,0xFF,0xFC,0x7F,0xFF,0xE4,0xFF,0xFB, +0xEF,0xFB,0xFE,0xDF,0xB7,0xED,0xFF,0xFE, 0xDF,0x7F,0xFF,0xFE,0x7F,0xB7,0xFF,0xFF, +0xFF,0xFF,0x89,0xFF,0xFF,0xCF,0xF3,0xFE, 0x7F,0xFF,0xEF,0xFF,0xFE,0x7E,0x7F,0xFB, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF1, 0xFF,0xEB,0x7A,0xD5,0xBF,0x6F,0xDB,0xBE, +0xFD,0xB7,0xD8,0xF6,0xE5,0xBF,0x6F,0xFB, 0xFE,0xF5,0xBD,0x7E,0x06,0xFF,0xDF,0xF7, +0xFB,0xF6,0xFF,0x3F,0xFF,0xDB,0xFF,0xFF, 0x6F,0xFB,0xF7,0xFF,0xFF,0xFF,0xFB,0xFE, +0xF7,0xAF,0xFF,0xB7,0xED,0xEF,0xF7,0xFE, 0xFF,0xFF,0xDF,0xFF,0xFE,0xFF,0xEF,0xFF, +0xFF,0xFF,0xFF,0xBF,0xF7,0xFC,0x1F,0xEE, 0xFB,0xFE,0xBD,0xFF,0x7F,0x5F,0xD7,0xFD, +0xFB,0x43,0xFF,0xFF,0xFD,0xFF,0x5F,0xFF, 0xF7,0xFF,0xF9,0x3F,0xFF,0xCF,0xF3,0xFD, +0xF7,0x7E,0xEF,0xA7,0xF9,0xFE,0x8F,0xA7, 0xE9,0xF3,0x7E,0x9F,0xFB,0xF8,0xFF,0xFF, +0x3F,0xFD,0x7F,0x5F,0xDF,0xFD,0xFF,0xFF, 0x5F,0xFF,0xFD,0x5F,0xFF,0xFF,0x7F,0xFD, +0x7F,0xFD,0x9F,0xFF,0xE0,0xFF,0xFA,0xF8, 0xBE,0x6F,0x9F,0xE6,0xF8,0xBE,0x3F,0x9A, +0xF9,0xBE,0x6F,0x9F,0xE2,0xF9,0xFE,0x6F, 0x9F,0xF9,0xFF,0xF5,0xFD,0x7F,0xCF,0xDF, +0xFD,0xFD,0x7F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xF7,0xF5,0xFD,0x0F,0xDB,0xFF,0xD3,0xFF, +0xEB,0xFA,0xFF,0xFF,0xBF,0xFF,0xFA,0xFF, 0xFF,0xCB,0xFB,0xFE,0xFF,0xFF,0xEB,0xFA, +0xFE,0xFF,0xFF,0xB7,0xFF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xDF,0xF5,0xFF,0xFF,0xD7,0xFF, +0xFF,0xFF,0xDF,0xD7,0xF5,0xFF,0x7F,0xFE, 0x4F,0xFF,0xFD,0xFF,0x7F,0x7F,0xFF,0xAD, +0xEB,0xFB,0xFF,0xAD,0xFF,0xFF,0xFF,0xFF, 0xAF,0xEB,0xFB,0xFF,0xFC,0x0D,0xFF,0xFF, +0xDF,0xD2,0xFD,0xFF,0xFF,0xFD,0xF6,0xFF, 0xFF,0x7F,0xFF,0xFF,0x1F,0xFF,0xFF,0xFF, +0xFF,0xFB,0x3F,0x7D,0xEB,0x32,0xFE,0xBF, 0x2F,0xEB,0xFA,0xAE,0xBD,0xE0,0xFA,0x7E, +0xBF,0xAD,0xEB,0xFA,0xFE,0xBF,0xF5,0x7F, 0xFF,0xDE,0xFE,0xE3,0xFB,0xFF,0xFF,0xFF, +0xDF,0xEF,0x4F,0xDF,0xFF,0x7F,0xDF,0xFF, 0xF7,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xEF, +0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xDF, 0xED,0xFB,0xDF,0xFF,0xBF,0xFF,0xFF,0xFF, +0x81,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFF,0xFE,0xDD,0xFE,0xEF,0xFD,0xFF, +0xFF,0xFB,0xFE,0xF7,0xFF,0x93,0xFD,0xFB, 0x7E,0xFF,0xFE,0x87,0xE9,0xFF,0x7F,0xB3, +0x9F,0xFE,0xFE,0xFF,0xAF,0xFD,0xFE,0x7E, 0x3F,0xFE,0x67,0xFF,0xFF,0xF7,0xFF,0xFF, +0xFC,0xF7,0xDF,0xFD,0xFF,0x7F,0xFF,0xFF, 0x7F,0x6D,0xFF,0xFF,0xFE,0xFF,0xFF,0x2F, +0xFF,0xBF,0xFF,0xFF,0xEE,0xFF,0xBE,0xFF, 0xFF,0xFE,0xFF,0xEF,0xFF,0xFF,0xFE,0xFF, +0xEF,0xFF,0xFF,0xFA,0x5F,0xFF,0xFF,0xFB, 0xFF,0xFF,0xEF,0xFF,0xFB,0xFE,0xFD,0xFF, +0xFE,0xFF,0xFB,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFE,0xBF,0xDF,0xFF,0xFB,0xFF,0xFF,0xF7, +0xFC,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF2,0x7F,0xFF, +0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xF3,0xFF,0xFF,0xFF,0xEF,0xFB,0xFF,0xFF, +0xFF,0xDF,0xE2,0xFF,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xE7,0xFF,0xFD, +0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xED, 0xEF,0xFD,0xFF,0xFF,0xDF,0xD7,0xF5,0xFD, +0x7F,0x5D,0xFD,0xFF,0x7F,0xDF,0x97,0xF4, 0xFD,0x7B,0x5F,0xFF,0xC9,0xFF,0xFB,0xFE, +0xFF,0xBF,0xFF,0x5F,0xFF,0xFF,0xF7,0xFF, 0xEF,0xFD,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xF7,0xFF,0xD7,0xFD,0x7D,0x7F,0xFF, 0xFF,0xFF,0xFF,0xEF,0xDF,0xF7,0xFD,0xFF, +0xBB,0xFF,0xFF,0x7F,0xFF,0xFE,0xE3,0xFF, 0xF9,0xFE,0x7F,0xBF,0xEF,0xFB,0xFE,0xFF, +0xBF,0xF9,0xFE,0xFF,0x9F,0xEF,0xF9,0xFE, 0xFF,0xBF,0xF3,0xDA,0xFF,0x37,0xCD,0xF3, +0x7C,0xDF,0x37,0xCD,0xF3,0x7F,0x37,0xCD, 0xF3,0x7C,0xDF,0x37,0xCC,0xF3,0x7F,0x5A, +0xBD,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFD, 0xBF,0x6F,0xDE,0xFD,0xBF,0x6F,0xDB,0xF6, +0xFD,0xBF,0x6F,0xFE,0xF1,0x6F,0xEB,0x7A, 0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7,0xAF, +0x7A,0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7, 0xFF,0x7E,0xFF,0xFE,0xCD,0xB3,0x6C,0xDB, +0x36,0xCD,0xB3,0x6C,0xDE,0xCD,0xB3,0x6C, 0xDB,0x36,0xCD,0xB3,0x6C,0xDF,0xC9,0xBF, +0xF7,0xBD,0xEF,0x7A,0x9E,0xA7,0xA9,0xEA, 0x7A,0xB7,0xBD,0xEA,0x7B,0xDE,0xA7,0xBD, +0xCA,0x72,0x8D,0x91,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xF7,0xEF,0xFB, +0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFE, 0x87,0xFF,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6, +0xFD,0xBF,0x6F,0xF6,0xFD,0xBF,0x6F,0xDB, 0xF6,0xFD,0xBF,0x6F,0xFE,0x4F,0xFF,0xBF, +0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB,0xEF, 0xBE,0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB, +0xEF,0xFC,0x5F,0xFF,0xFF,0xFF,0x3F,0xCF, 0xF3,0xFC,0xFF,0x3F,0xCF,0xFC,0xFF,0x3F, +0xCF,0xF3,0xFC,0xFF,0x3F,0xCF,0xFD,0x9F, 0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF, +0xEB,0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFF,0xE1,0x6F,0xFD,0xFF,0x7F, +0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFD,0xFF, 0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF, +0x7A,0xBF,0xFB,0xFE,0xDF,0xB7,0xED,0xFB, 0x7E,0xDF,0xB7,0xFB,0x7E,0xDF,0xB7,0xED, +0xFB,0x7E,0xDF,0xB7,0xFF,0xC9,0xFF,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, +0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEE, 0xFB,0xFE,0xBB,0xFF,0xFE,0xFF,0xBF,0xEF, +0xFB,0xFE,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0x3F,0xCF,0xFF,0xE7, +0xFE,0xFF,0xF5,0xFD,0x77,0x5D,0xD7,0x35, 0xDD,0x77,0xD7,0xF5,0xCD,0x7B,0x5D,0xD7, +0xF5,0xDD,0x77,0xFE,0x27,0xFF,0xFF,0x8B, 0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9,0xAF, +0x8B,0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9, 0xFE,0x1F,0xFF,0x5F,0xD7,0xF5,0xFD,0x7F, +0x5F,0xD7,0xF5,0xFF,0x5F,0xD7,0xF5,0xFD, 0x7F,0x5F,0xD7,0xF5,0xFF,0xFA,0x3F,0xFE, +0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xEB, 0xEC,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF, +0xEB,0xFF,0xFE,0x7F,0xFD,0x7F,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE6, 0xFF,0xFA,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF, +0xF7,0xFC,0xFF,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFD,0xFF,0xF5,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0x02,0xFF,0xFE,0xBF,0xAB,0xEB,0xFA, 0xBE,0xBF,0x23,0xEB,0xDE,0x1F,0xAF,0xEA, +0xFA,0xFE,0xAF,0xAF,0xEB,0xFD,0x97,0xFF, 0xF3,0xFC,0x7B,0x1F,0xCF,0xF1,0xFC,0x7F, +0x1F,0xF1,0xFC,0x77,0x1F,0xCD,0xF1,0xFC, 0xFF,0x1F,0xFE,0x87,0xFF,0xAF,0xEF,0xFA, +0xFE,0xFF,0xAF,0xEF,0xFA,0xFD,0xBF,0x2B, 0xFB,0x7E,0xBF,0xBF,0xEB,0xFB,0xFB,0xFB, +0xDF,0xFF,0xFB,0xF7,0xFF,0xFF,0x7F,0xF7, 0xF7,0xFF,0xFD,0xDF,0xFE,0xFC,0xDF,0xFF, +0xDF,0xFF,0xFD,0xFF,0xDA,0xBF,0xFF,0xBB, 0xEF,0xFB,0xF9,0xFF,0xBE,0xEF,0xFB,0xFB, +0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xF7,0x7F,0xFD,0xD7,0xFF,0xFF,0x7F, +0xFF,0xFF,0xFF,0xFE,0xF7,0xFF,0xFE,0xFF, 0xF7,0xFF,0xFF,0x7F,0xFF,0xFF,0xEC,0xFF, +0xFF,0xFE,0xDF,0xBF,0xFF,0xFB,0xFE,0xFF, 0xBB,0x68,0xAE,0x1F,0xAE,0xFB,0xFB,0xFF, +0xFF,0xBF,0xFF,0xD5,0xFF,0x7F,0xFF,0xFF, 0xF7,0xFE,0xFE,0xFF,0xBF,0xEF,0x9F,0xFD, +0x7F,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF,0xFF, 0xBB,0xF7,0xBF,0xFF,0xFF,0xFF,0xFF,0xDF, +0xFF,0xBF,0xFB,0xFF,0xFF,0xFF,0xDE,0x3F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xA7,0xFF,0xFF, +0xFF,0xFF,0xEF,0xFF,0x7F,0xFB,0xFD,0xFB, 0x7F,0xFF,0xFF,0xFF,0xFF,0xCF,0xF3,0x7C, +0xFF,0x7F,0x8D,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFB,0xFF,0xF7,0xFB,0xFE,0xFD,0xFF,0xFF, +0xFF,0xFF,0xF7,0xFD,0xFF,0x7F,0xFD,0x1F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xBF,0xDF,0xFF, +0xFF,0xFE,0x5C,0xFF,0x6D,0xFF,0x7F,0xAB, 0xE7,0xF1,0xFF,0xFD,0x9F,0xFF,0xFF,0xAD, +0xEB,0x7A,0x3F,0x1F,0xFF,0xFF,0xFE,0xBF, 0xAF,0xF3,0xDE,0xF5,0xFF,0x8F,0xFB,0xDF, +0xE6,0x7F,0xFF,0xDF,0xF3,0xFD,0xFF,0x7E, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xF7,0xF3, +0x7F,0xDF,0xF7,0xEF,0xFF,0xF6,0x3F,0x9F, 0xDF,0xFF,0xFF,0xEE,0xFF,0xFF,0xEF,0xFB, +0xFF,0xFF,0xF9,0xFB,0xFE,0x4F,0xBF,0xEF, 0xBB,0xFF,0x69,0xAF,0xAF,0xFC,0xFF,0x3F, +0xDD,0xFF,0xFC,0xBF,0x8F,0xFF,0xFD,0xF3, 0xBF,0xED,0x9E,0xFC,0xBF,0x6F,0xF5,0xD3, +0xDF,0xFF,0xDB,0xD6,0xF5,0xEF,0xFD,0xFE, 0xFF,0xB9,0xFF,0x1F,0xD2,0xA9,0xAF,0xFF, +0xDB,0xF7,0xBF,0xEF,0x46,0xFF,0xFF,0xAD, 0xEB,0x7A,0xDF,0xEF,0xF7,0xFF,0x7F,0xF7, +0x9F,0xED,0xFF,0x7F,0xFF,0xAD,0xEB,0x7F, 0xF5,0x6F,0xFF,0xFD,0xFB,0xD6,0xF4,0xF7, +0xFB,0xF9,0x7E,0x7F,0xFF,0x5F,0xC2,0xFE, 0xBF,0xFD,0xFB,0x33,0xDF,0xF9,0x5B,0xFF, +0xFF,0xDD,0x67,0x7D,0xCF,0xEF,0xDB,0xEC, 0xFF,0x77,0xDD,0xF7,0xFD,0xFF,0xFF,0xDE, +0xA7,0xBF,0xD4,0x9F,0xFF,0xFF,0xBF,0xEF, 0xFE,0xFF,0xDF,0xEF,0xBB,0xFF,0xFF,0xEF, +0xEB,0xFA,0xFF,0xEF,0xBD,0xFB,0xFF,0xE2, 0x7F,0xFF,0xDF,0xDF,0xF7,0xFD,0xBF,0xBB, +0x73,0xF7,0xFD,0x7F,0xDF,0xDE,0xF7,0xBF, 0xEA,0xDB,0xF6,0xFF,0xD6,0xFF,0xFF,0x66, +0xFF,0xBE,0xFF,0xBF,0x6B,0xD9,0xF6,0xDF, 0xFF,0xFB,0x7E,0x7F,0xB7,0x7E,0xFF,0xFE, +0xFF,0xCD,0xFF,0xFE,0x7F,0xFF,0xFC,0xFD, 0x3F,0xFB,0xFB,0xF7,0xFF,0xFF,0xFB,0xF6, +0x7D,0xFE,0x7F,0xFF,0xFC,0xFF,0xB9,0xFF, 0xF9,0xFA,0xFE,0xBF,0xAF,0x5B,0xD6,0xED, +0xAD,0x7B,0xF6,0xF9,0xBF,0xEF,0xF8,0xFA, 0xFE,0xBF,0xFE,0xE6,0xFF,0xFF,0xF7,0xFD, +0xFF,0x7F,0xBF,0xEF,0xF3,0xFF,0xFF,0x6F, 0xF7,0xFE,0xFF,0xFF,0xF7,0xFD,0xFE,0xF7, +0xEF,0xFF,0xFB,0xEF,0xFB,0x7E,0xDE,0xFE, 0xFF,0xBF,0xFF,0xFE,0xFF,0xFF,0xFB,0xFF, +0xFF,0xEF,0xFB,0x6F,0xFC,0x1F,0xFE,0xE7, 0xFF,0xFF,0xFF,0xEF,0xFF,0xD3,0xB4,0xBB, +0xFF,0xFF,0xFD,0xBF,0x6F,0xE3,0xFE,0xFF, 0xBF,0xFC,0xBF,0xF7,0xCF,0xF7,0xFD,0xFF, +0x2F,0xDF,0xAB,0xEA,0xFF,0xDF,0xE7,0xEA, 0x9A,0xAF,0xEF,0xFB,0xFE,0xFF,0xF5,0x3F, +0xFD,0x7E,0xFF,0xD7,0xF5,0xFB,0xFF,0xFD, 0xF7,0xFF,0x7F,0xFE,0xF7,0xFD,0xFF,0xD7, +0xFF,0xD7,0x7F,0xEE,0x7F,0xFA,0x79,0xFE, 0x2F,0x8B,0xE6,0xF9,0xFE,0x3F,0x9E,0xF9, +0xBE,0x2F,0x0B,0xE7,0xF9,0xFE,0x2F,0x9F, 0xFD,0xFF,0xFE,0x7D,0x7F,0x5F,0xD7,0xFF, +0xFF,0x7F,0xFF,0xFD,0xFF,0x7F,0x5F,0x97, 0xFF,0xFD,0x7F,0x5F,0xFF,0xE3,0xFF,0xFF, +0xFA,0xFE,0xBF,0xAF,0xFB,0xFB,0xFF,0xFF, 0xCF,0xEB,0xFE,0xBF,0xAF,0xFF,0xFA,0xFE, +0xBF,0xFF,0x87,0xFF,0xFF,0xF5,0xFF,0xFF, 0xFF,0xFF,0xFD,0xFF,0x7F,0xFF,0xFF,0xFF, +0xFB,0xFF,0xFF,0xF5,0xFF,0xFF,0xFE,0x0F, 0xFF,0xFD,0xEB,0xFF,0xFF,0xF7,0xFF,0xEF, +0x7B,0xDF,0xFE,0xFF,0xFF,0xDF,0xF7,0xFD, 0xEB,0x7F,0xDF,0xFF,0x5F,0xFF,0xFF,0xFF, +0xFF,0xFD,0xBF,0xFF,0x7E,0xFA,0xBF,0xC7, 0xDB,0xF7,0xBD,0x3F,0xFB,0xFF,0xF6,0xFF, +0xFA,0xAF,0xFF,0xEB,0xFA,0xFE,0x3F,0x2F, 0xEA,0xFA,0x3E,0xAD,0xC9,0xBA,0xF6,0xAD, +0xAF,0xEB,0xFA,0xF6,0xBF,0xFE,0x7F,0xFF, 0xFF,0xFD,0xFF,0xF1,0x7F,0x3F,0xCF,0xF1, +0xEF,0xFF,0x7F,0xFF,0xBC,0xDF,0xDF,0xF7, 0xDD,0xFF,0xE0,0x7F,0xFF,0xFF,0xFE,0xFF, +0xFA,0xEC,0xBB,0x7F,0x5F,0xFF,0xFB,0xEC, 0xFF,0xEF,0xB7,0xFF,0xF7,0xFF,0xFF,0xB5, +0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xEE,0xDF, 0x5F,0xDF,0xDE,0xFF,0xAE,0xE7,0x77,0xFF, +0xFF,0xDF,0xF7,0xFF,0xE3,0xFF,0xFA,0xBB, 0xFE,0xFF,0xAF,0xFD,0xFB,0xFE,0xBF,0xAB, +0xF9,0xFE,0xFF,0xBF,0x7F,0xBF,0xFE,0xBD, 0xFE,0xD7,0xFF,0x9F,0xFD,0xFF,0xBE,0xEF, +0xFF,0xEE,0xFD,0xBB,0x5B,0xEF,0xFF,0x7F, 0xEF,0xFF,0xEF,0xFF,0x7F,0xFF,0x4F,0xFF, +0xEF,0xFB,0xBC,0xFC,0xFF,0xFF,0xFF,0xFE, 0xFE,0xFD,0xFA,0xFE,0xFB,0xFF,0xFD,0xF3, +0xFB,0xFF,0xF8,0x5F,0xFF,0xFF,0xD7,0xF5, 0xFD,0xDF,0xEF,0xFF,0xF3,0xDC,0x5F,0xCE, +0xF5,0xBD,0xFF,0xFF,0xD7,0xFF,0xFF,0xF9, 0x3F,0xFF,0xDF,0xF7,0xFF,0xFE,0xFF,0xFD, +0xFF,0xFB,0xFF,0xF7,0xB9,0x7D,0xFE,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF9,0x7F,0xFF,0xFE, +0xFF,0xFF,0x7F,0xFF,0xFE,0xFF,0xFF,0xF7, 0xF6,0xFF,0xBF,0xF1,0xF8,0xFF,0xFF,0xFF, +0xFF,0xE0,0xFF,0xFF,0xFF,0xFF,0xF9,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF, +0x9B,0xFB,0x7F,0xFF,0xFF,0xFF,0xC1,0xFF, 0xDF,0xFF,0x3F,0x5F,0xD7,0xBF,0xEF,0xBB, +0xDE,0xEE,0xFF,0x7F,0xDF,0xFF,0xFE,0xF5, 0x7F,0xDF,0xFF,0x99,0xFF,0xFF,0xFA,0xFF, +0xBF,0xFD,0xEB,0x7A,0xFF,0xB7,0xFE,0xFE, 0xFF,0xFF,0xEF,0xFF,0xFF,0xFD,0xBF,0xFF, +0x97,0xFF,0xFD,0xF7,0xFF,0x7F,0xF7,0xFF, 0xFF,0xFD,0x5F,0xFE,0xF3,0xF9,0xDF,0xDF, +0xFF,0xFF,0xFC,0xFF,0xFF,0x83,0xFF,0xFF, 0xFE,0xFF,0x9E,0xEC,0xFB,0xEE,0xFF,0x9F, +0xBF,0xEF,0xFF,0xFE,0xED,0x7B,0xFF,0xFF, 0xFF,0xF1,0x5A,0xFF,0xFF,0xFD,0xFF,0x7C, +0x69,0x3B,0xDF,0xFF,0x7F,0x1F,0xDF,0xFF, 0xFD,0xBA,0xFF,0xFF,0xFB,0xFF,0x5B,0xBD, +0xFF,0xFF,0xFF,0xFF,0xD7,0xB6,0xED,0xE9, 0xFF,0xD6,0xBD,0x6F,0x5F,0xFB,0xFF,0xEF, +0xFF,0x5F,0xFE,0xF6,0x6F,0xFF,0xFF,0xFF, 0xFF,0xF7,0xEB,0x7A,0xDF,0xFF,0x9F,0x7F, +0x7F,0xFF,0xB7,0xFF,0xFF,0xFE,0xDF,0xFF, 0x6C,0xFF,0xFB,0xFF,0xBB,0x6F,0xEB,0xFE, +0xCC,0xF7,0xA5,0xFA,0x5C,0xF5,0x75,0xBB, 0xB7,0xDF,0xFE,0x6F,0x5F,0xC5,0xBF,0xFD, +0x7B,0xFE,0xFF,0x95,0xE7,0x29,0xCF,0x4F, 0xF5,0x91,0xEE,0x6B,0xDF,0xEF,0xFD,0x54, +0xF5,0xBD,0xB1,0xFF,0xEF,0xEE,0xFB,0xBE, 0xBF,0xAF,0xFE,0xDE,0xBD,0x6F,0xDA,0xF2, +0xFF,0xAF,0xBE,0xFF,0xFF,0xFD,0x7E,0xA7, 0xFF,0xF7,0xFF,0xBF,0xEF,0x7B,0xF6,0xFD, +0xBD,0x4A,0xF2,0x85,0x85,0xBF,0x5B,0xFE, 0xB5,0xFD,0xFA,0xFF,0x4F,0xFF,0xFE,0xDF, +0xFF,0xED,0xFF,0xBF,0xFF,0xBF,0x7F,0xFE, 0xFF,0xB7,0x6D,0xFF,0xF7,0xBF,0xBF,0xEF, +0xFD,0x1F,0xFF,0xFE,0x7D,0xFF,0x67,0xFF, 0xFF,0xFF,0x3F,0x7F,0xFE,0xBF,0xFF,0xE7, +0xDF,0xE7,0xFF,0xEF,0x6B,0xFC,0x1F,0xFF, 0xBF,0xEF,0xFB,0xFE,0xDE,0xBF,0xAF,0xFA, +0xFF,0xB6,0xEF,0xF9,0xFE,0xFF,0x8F,0xEF, 0xDB,0xEF,0xAB,0x6F,0xFB,0xFE,0xFF,0xFF, +0xEF,0xFD,0xFF,0x7F,0xFF,0xFF,0xDE,0xFF, 0xFF,0xEF,0xFF,0xFF,0xFF,0x3F,0xFF,0x6C, +0xFF,0xBF,0xFB,0xFF,0xFE,0xFF,0xFB,0xFE, 0xDF,0xFF,0xFF,0xEF,0xFF,0xFF,0xBF,0xFF, +0xFF,0xFE,0xFB,0xFF,0xD5,0x7F,0xFF,0xFF, 0xEF,0xFB,0xFF,0xFF,0xBF,0xEF,0x43,0xB5, +0xFD,0x6F,0xCF,0xD6,0xBE,0x3F,0x7F,0xDB, 0xFE,0xC3,0xFF,0xFD,0xFF,0xAF,0xEB,0xFB, +0xFC,0xFF,0x3E,0xEF,0xE8,0xFA,0xBD,0xCD, 0xAA,0xFE,0xFE,0x7D,0xCF,0xFF,0xB7,0xFF, +0xF7,0xFF,0xFF,0xFF,0xFD,0xFF,0x75,0xCD, 0x52,0xD7,0xFD,0xFB,0xF7,0xDD,0xFB,0xEF, +0xEB,0xFF,0xFF,0x4F,0xFF,0xBF,0x9F,0xE7, 0xF9,0xFC,0x7F,0x8B,0xC3,0xF9,0xAF,0x8F, +0xE7,0xE9,0xBE,0x7F,0x9F,0xE6,0xF9,0xFC, 0x5F,0xFF,0xFF,0xF7,0xFD,0xFF,0x7A,0x5F, +0xD7,0xED,0xFF,0xFF,0xD7,0xFF,0xDD,0x7F, 0xE7,0xFF,0xFC,0xFF,0xFC,0x3F,0xFF,0xFF, +0xFF,0xFB,0xFF,0xFE,0xBF,0xAF,0xFF,0xFD, 0xFF,0xEF,0xFF,0xEB,0xFF,0xFF,0xFF,0xFF, +0xFF,0xF7,0x7F,0xFF,0x7F,0xDF,0xFF,0xFD, 0xFD,0x7F,0xFE,0xF7,0xFD,0x7F,0xDF,0xFF, +0xFD,0xFF,0xFF,0xDF,0xFB,0xFF,0xEE,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7A,0xDF,0xF5, +0xFD,0xFA,0xDF,0xF7,0xFC,0xFF,0x7F,0xDF, 0xBF,0xED,0xFF,0xC9,0xFF,0xDF,0xFF,0xBF, +0x2F,0xFB,0xFF,0xBC,0xAD,0xFF,0xF7,0xFF, 0xFF,0xEF,0xD3,0xFF,0x7D,0xBF,0x6F,0xFF, +0xFA,0xFF,0xFE,0xBF,0xAE,0xEA,0xFA,0xBE, 0xAD,0xA5,0xEB,0xCE,0xBF,0xA7,0xEB,0x5A, +0xDE,0xBD,0xAF,0x6B,0xFD,0x57,0xFF,0xFF, 0xF4,0x7F,0x1F,0x7F,0xFD,0xFF,0x7F,0x36, +0xF0,0xDF,0x79,0xFF,0xFF,0xFF,0xF7,0xFD, 0xBF,0xFF,0x87,0xFF,0xFB,0xF3,0xFC,0xFF, +0xFF,0xFF,0xFF,0x7E,0xFF,0xBF,0xDF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xF8,0x9F, +0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFD, 0xF7,0xFC,0xBD,0xFF,0xFE,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFB,0xF9,0xBF,0xFF,0xFF,0xEB, 0xE2,0xFE,0xFF,0xBF,0xEF,0xA9,0xBA,0x2F, +0xEB,0xF9,0xFE,0x77,0xDF,0xF7,0xFF,0xFF, 0xF9,0x7F,0xFF,0xFF,0x7F,0xEF,0xD7,0xFF, +0xFD,0xFF,0xFB,0xF5,0xFF,0xBF,0x6F,0xDF, 0xFF,0xFF,0xFD,0xFF,0xFF,0xF0,0xFF,0xFF, +0xFF,0x3F,0xCF,0xFF,0xBA,0xEE,0x9B,0xBF, 0xEE,0xD7,0xFE,0xCD,0xEF,0xFF,0xDF,0xBF, +0xFF,0xFF,0xC5,0xFF,0xFF,0xFD,0x7F,0x4F, 0xFD,0xF6,0xD9,0xFF,0x4F,0xD6,0xFD,0xBF, +0x6E,0xFF,0xFF,0xF4,0x7F,0xFF,0x7F,0x8B, 0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xF9,0xFE, +0x37,0xFF,0xD9,0xFB,0xF5,0xAF,0xFD,0xFF, 0xFF,0xFB,0xFF,0xFF,0x07,0xFF,0xFF,0xFF, +0xFB,0xF7,0xFF,0xFD,0xFF,0x7C,0xFA,0x7E, 0x4F,0xFC,0xDF,0x1D,0xC7,0xFF,0xFF,0xFF, +0xFF,0xAE,0xFF,0xFF,0xFF,0xFF,0xFD,0xFB, 0xFF,0xFF,0xFE,0xFE,0xFC,0xFF,0x7F,0x7F, +0xBF,0xEF,0xFE,0xFF,0xFF,0xFF,0x5F,0xFD, 0xFF,0xFF,0xFF,0xFD,0x6F,0x5A,0xD7,0x7B, +0xBE,0x5F,0xFE,0x39,0xFF,0xF7,0xFF,0xF7, 0xFD,0xFE,0xAA,0x1F,0xFF,0xFF,0xFF,0xFF, +0xFE,0xFE,0xAB,0xAF,0xFD,0xFE,0xBF,0xFF, 0xF7,0xFF,0x7F,0xFE,0x8F,0xE3,0xFB,0xEE, +0x7F,0xFF,0xFF,0xFF,0xFF,0xEB,0xFB,0xFF, 0xFD,0xBF,0xEF,0xDF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFB,0xE4,0x3F,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF3,0xEF,0xBB,0xFB, +0xBF,0xEF,0xBB,0xFF,0xD7,0xBF,0xFF,0xFF, 0xFF,0x29,0xAF,0xF7,0xFF,0xFF,0xFB,0xFF, +0xFB,0xE6,0xFF,0x0F,0xFB,0x3F,0xDF,0x0F, 0xFF,0xAF,0xFF,0xFF,0xFF,0xF5,0xC3,0xDF, +0x5F,0xFF,0xFF,0xFF,0xFE,0x6B,0xCA,0xBE, 0xBC,0xFF,0x9F,0xF2,0xBF,0xFF,0xFE,0xFA, +0xFF,0xFF,0xEF,0x16,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFC,0xDF,0x97,0xFD,0x79,0xFF,0x37, +0xE7,0x7F,0xFF,0xFF,0xB5,0xFF,0xFF,0xF6, 0x2F,0xFF,0xFD,0xFB,0xFE,0xFF,0xFF,0xFD, +0x5F,0x57,0x5F,0xFF,0xDB,0x52,0xDF,0xFF, 0xFD,0xBF,0xFF,0xFF,0xFC,0xDB,0xFF,0x7B, +0xB5,0xFD,0x7F,0xFF,0x71,0x9C,0x6E,0xFF, 0xF6,0x35,0xA5,0x9B,0xFF,0xFF,0xFD,0xFF, +0xFF,0xDB,0x9E,0x7F,0xFE,0xEF,0xFB,0xFF, 0xFF,0xBD,0xEF,0xFF,0xDE,0xB7,0xF9,0x4B, +0xFF,0xF5,0xEF,0xFF,0xFF,0xFF,0xE8,0x7E, 0xFF,0xEA,0xDF,0xF7,0xFF,0xFD,0x69,0x5B, +0xFC,0x9F,0xEF,0x78,0xD6,0xFF,0xEB,0xEF, 0xFF,0xFF,0xFF,0xE8,0xFF,0xFF,0xED,0xFF, +0xFF,0xFF,0xFF,0xE3,0xF9,0xF6,0xBF,0xFF, 0xFF,0xFE,0xDF,0xFF,0x7F,0xFF,0xFF,0xFF, +0xD1,0xFF,0xFF,0xE7,0xFF,0xFF,0xFF,0xFF, 0xE7,0xF9,0xFF,0xBF,0x7F,0xD9,0xFF,0xFD, +0xFE,0x7F,0xFF,0xFE,0xFF,0xF9,0xFF,0xFB, 0xD6,0xDF,0xBF,0xEF,0x5B,0xD6,0xFF,0xBF, +0xFB,0xF6,0xFF,0xBF,0xEF,0xF8,0xF6,0xDD, 0xBE,0xFE,0x16,0xFF,0xBF,0xEF,0xFF,0xFE, +0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0x6F,0xFB, 0xFF,0xFF,0xFF,0x6F,0xF3,0xFF,0xF7,0xEF, +0xFB,0xFF,0xBF,0xFF,0xEF,0xFE,0xFF,0xBF, 0xFF,0xFF,0xFF,0xBE,0xBF,0xFF,0xEF,0xFF, +0x7F,0xEF,0xFF,0xFD,0x17,0xFB,0x7B,0xFF, 0xFF,0xFD,0x7F,0xDB,0xF6,0xF4,0x7F,0xFA, +0xFE,0xF5,0xBF,0xEB,0xE3,0xF7,0xFF,0xFF, 0xE9,0xBF,0xFF,0xAF,0xF7,0xFD,0xF3,0x7E, +0x8F,0xA3,0xEA,0xFF,0xCB,0xF3,0xEE,0xFF, 0xBF,0xEF,0xF7,0xF9,0xFF,0xFE,0x7F,0xFF, +0xFF,0xFF,0xFF,0xF5,0xFB,0xF6,0xFF,0xF5, 0x2F,0xFE,0xFB,0xD7,0xBF,0xFF,0xBE,0xDF, +0x9F,0xFF,0xF0,0xFF,0xFF,0xF9,0xFE,0x7F, 0x8F,0xA3,0xF8,0xFE,0x6F,0x9F,0xF9,0xF6, +0x2F,0x9F,0xE7,0xF9,0xFE,0x2F,0x9F,0xE1, 0xFF,0xFF,0xFF,0x7F,0xDF,0xF7,0xF5,0xFD, +0x7F,0x7F,0xF5,0xFF,0x9F,0x5F,0xFB,0xFE, 0xFF,0x7F,0xFF,0xFF,0xCB,0xFF,0xFF,0xFB, +0xFE,0xFF,0xBF,0xAF,0xFB,0xFE,0xFF,0xDF, 0xFE,0xFE,0xBF,0xF7,0xFF,0xFF,0xFF,0xFF, +0xFF,0xC7,0xFF,0xFF,0xFD,0xFF,0x7F,0xDD, 0xF7,0xFD,0xFF,0xFF,0xD7,0xFF,0xFD,0x7F, +0xFF,0xFB,0xFD,0xFF,0xFF,0xFE,0xEF,0x7F, 0xFD,0xEF,0xFB,0xFE,0xFB,0xFD,0xFF,0x7F, +0xDF,0xFD,0xFF,0x7A,0xDF,0xF7,0xFD,0xFF, 0xFF,0xFF,0xFF,0x1F,0xFF,0xFF,0xD3,0xF7, +0xFF,0xFF,0x6F,0xDB,0xFF,0xFF,0xEF,0xCB, 0xF4,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE, +0x29,0xFF,0xE8,0xDA,0x76,0x9F,0xAF,0x6A, 0xDA,0xFE,0x35,0xEB,0xDA,0xD6,0xBF,0xAB, +0xEB,0x7A,0xDE,0xBF,0xD7,0x7F,0xFF,0xFE, 0xFF,0xBF,0xEF,0xFD,0xDF,0x77,0xBF,0xFD, +0x37,0xEF,0xFF,0xEF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFE,0x7F,0xFF,0xFF,0xFF,0xF7,0x7E, +0xDF,0xFF,0xFF,0xFF,0xFA,0xB7,0x7F,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0x89,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x9F,0xFB,0xFF,0xFF,0xFF,0xE7,0xFF, +0xFF,0xFF,0xFF,0xAA,0xFF,0xAB,0xFB,0xFA, 0xEF,0xBF,0xFF,0xDF,0xFA,0x7B,0xB9,0xFE, +0xFE,0xFF,0xFD,0xFF,0xF7,0xFE,0x3F,0xFF, 0xB7,0xFF,0xF7,0xEE,0xFF,0x7F,0xEF,0xFF, +0xFF,0x7F,0xFF,0x1F,0xFB,0xFF,0xBF,0xFB, 0xFE,0xFF,0xBD,0xFF,0xFF,0x2F,0xFF,0xBF, +0xFF,0x7F,0xDF,0xFA,0xFF,0xFF,0xFC,0xEE, 0xF5,0xF3,0xBE,0xFB,0x0F,0xEF,0xF3,0xBE, +0xEF,0xFC,0x5F,0xFF,0x5A,0xFF,0xF7,0xDF, 0xFF,0xFF,0xFE,0xD5,0xFC,0x5F,0xFB,0xF2, +0xFF,0xFF,0x2F,0xBB,0xF3,0xFF,0xFF,0xBF, 0xFF,0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, +0xBF,0xFF,0xFF,0xFD,0x7B,0xFF,0xDF,0xB9, 0xFF,0xFB,0xFF,0xD8,0x7F,0xFF,0xFF,0xFF, +0xFB,0xFF,0xFC,0x7F,0x1F,0xBF,0xE0,0xDF, 0xF7,0xEF,0xFF,0xFD,0x7F,0xFE,0xDF,0xFF, +0xE0,0xFF,0xFF,0xFD,0xEF,0xFB,0xFF,0xFE, 0xF7,0xDF,0xFF,0xEB,0x5F,0xFF,0xF7,0xFF, +0xFF,0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0xFD, 0xFF,0xFF,0xFF,0xF7,0xFD,0xFF,0x3B,0xDC, +0xFD,0x6D,0x7B,0x5F,0x57,0xF5,0xFD,0x7F, 0x5F,0xFF,0xB1,0xFF,0xEB,0xFF,0xFF,0xFF, +0xFB,0xFB,0xFE,0xFF,0xBF,0xFB,0xBE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xAF,0xFE,0xF7, +0xDF,0xDF,0xFF,0xFF,0xFF,0x7F,0xCF,0xF3, 0xF8,0xFF,0xD7,0xFB,0xFF,0x5F,0xBF,0xF7, +0xFB,0xFF,0x7F,0xFE,0x23,0xFF,0xFF,0xFE, 0x7F,0xF3,0xFF,0xFB,0xFE,0xFF,0xFF,0xF3, +0xFF,0xFF,0xF5,0xF9,0xFF,0x3F,0xFF,0xFF, 0xF0,0x9A,0xFF,0xBE,0x7F,0xFF,0xFC,0xF9, +0xFF,0xFD,0xAF,0xEB,0xFE,0xBF,0xFF,0xCF, 0xF3,0xFE,0x7F,0xFF,0xFF,0x5B,0xBD,0xFF, +0xBC,0xEB,0xFF,0xD7,0xD4,0xAF,0xAF,0xFD, 0xFF,0xCF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, +0xFD,0xFE,0xFF,0x6F,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFD,0x7F,0x5E,0xFD,0xBF,0xDB,0xF6, +0xFD,0xBF,0x6F,0xFB,0xEE,0xFD,0xFF,0x7A, 0xFF,0xFA,0xFB,0xFF,0x3F,0xFB,0xB7,0x5F, +0xD6,0xF7,0x1F,0x71,0xDC,0x77,0x1D,0xC7, 0x31,0xDC,0x77,0xDF,0xF9,0xBF,0xF5,0x5B, +0xF4,0xD7,0x9D,0xAE,0xFF,0xBF,0xFD,0xBF, 0xDB,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFE, +0x3D,0x81,0xFF,0xEB,0xFE,0xFE,0xFE,0xFF, 0xEB,0x7A,0xDF,0x7D,0x77,0x7D,0xF5,0x79, +0xDF,0x57,0xDD,0xF5,0x7D,0x7E,0xE6,0xFF, 0xD6,0x3F,0xBF,0x7F,0xFF,0xD4,0xF5,0x3F, +0xBF,0xFB,0xBE,0xEF,0xB3,0xEE,0xFB,0x9E, 0xEF,0xBB,0xFE,0x8B,0xFF,0xFE,0xDF,0xB7, +0xED,0xFF,0xF7,0xFD,0xFE,0xFF,0xEF,0xBB, 0xEE,0xFF,0xBE,0xEF,0xBB,0xEE,0xEB,0xFC, +0x1F,0xFF,0xFF,0xFD,0xFF,0xE7,0xFF,0xF7, 0xFD,0xFF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, +0xFE,0xFF,0xBF,0xEB,0xFA,0x1F,0xFF,0xB7, 0xEF,0x5B,0xFE,0xFF,0xAF,0xEB,0xDD,0xE7, +0xDE,0x77,0x9D,0xE7,0x79,0xDE,0x77,0x9D, 0xBF,0xE6,0x6F,0xFF,0xFE,0xFF,0xBF,0xEF, +0xFB,0xFE,0xFD,0xBF,0x6F,0xF6,0xFD,0xBF, 0x6F,0xDB,0xF6,0xFD,0xBF,0xFF,0x7E,0xFF, +0xFF,0xFB,0xFE,0xFE,0xFF,0xEF,0xFB,0xFD, 0xEF,0x7E,0xF7,0xBD,0xEF,0x7B,0xDE,0xF7, +0xBD,0xEF,0xFF,0xD5,0xFF,0xBF,0xFF,0xEF, 0xFE,0xFF,0xFC,0x3F,0x0F,0xE7,0xFE,0x7F, +0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFE, 0xF3,0xFF,0xFE,0xDF,0xAD,0xDF,0x67,0xEE, +0xFB,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFF,0x23,0xFF,0xFF, +0xFF,0xFF,0x7F,0xFF,0xF3,0xBC,0xDB,0xFE, 0xFB,0xFF,0xFB,0xBE,0xF7,0xFB,0xFF,0x7F, +0xDF,0xFF,0xCF,0xFB,0xFF,0x9F,0xE3,0xF9, 0xBE,0x3F,0x8F,0xE7,0x79,0xFF,0x9D,0xE7, +0xF9,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x5F, 0xFF,0xCF,0xF7,0xFF,0xFF,0xFF,0xDF,0xF7, +0xFE,0x7F,0xE7,0xF9,0xFE,0x7F,0xFF,0xFF, 0xFB,0xFE,0xFF,0xFF,0xBF,0xFF,0xBF,0xBF, +0xFF,0xFE,0xFF,0xBF,0xEF,0xFF,0xFD,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFD,0xFF, +0xFF,0x3F,0xFF,0xBF,0xFF,0xF7,0xFF,0xFF, 0x7F,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xE8,0xEF,0xFF, 0x5F,0xF7,0xBF,0xF9,0xFE,0xDF,0xB7,0xFD, +0xFF,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xDD,0xFF,0xF2,0xFF,0xBF,0xFF, +0xFF,0xBF,0xFF,0xFF,0x2F,0xF2,0xFF,0xBF, 0x2F,0x7B,0xD2,0xF7,0xBF,0x2F,0xFF,0xBB, +0xFF,0xEE,0x8F,0xAF,0xEB,0xFA,0xFE,0x3F, 0xA7,0x69,0xCE,0x8F,0xA4,0xEA,0xFA,0xEE, +0xB7,0xAE,0xEB,0xFD,0xC7,0xFF,0xF7,0xF7, 0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3E,0xF3, +0x74,0xFF,0x3F,0x4F,0xFF,0xE7,0xFF,0x3F, 0xFE,0xA7,0xFF,0xFF,0xDF,0xF7,0xB7,0xFF, +0xF7,0xFF,0xBA,0xEF,0x37,0xEB,0xFB,0xFE, 0xBF,0xFB,0xFE,0xF3,0xFF,0xF9,0xDF,0xFF, +0xBF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFD,0xDF,0xFF,0xFD,0xFF,0xFF,0xFB,0xFE, +0xFD,0xFF,0xFB,0xBF,0xFE,0x3F,0xED,0xFF, 0xDF,0xBE,0x3D,0xA7,0xFB,0xFA,0x3F,0xE6, +0xE1,0xFE,0xFE,0x3F,0xEF,0xE3,0xDF,0xF5, 0x7F,0xFE,0xFF,0x7E,0xFF,0xFF,0xFF,0xFF, +0xEF,0x6F,0xF6,0xFF,0x7D,0xEF,0xD7,0xDE, 0xFF,0x7D,0xEF,0xFF,0xF2,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0x7B,0xDE,0xFB,0xE6,0xEE, 0xEF,0x37,0x6E,0xF3,0x7E,0xEB,0x37,0xEF, +0xFF,0xC1,0xFF,0xFE,0xFF,0xF7,0xEF,0xFF, 0xFF,0xFF,0xBF,0x3F,0xD2,0xDF,0xBF,0x2F, +0x7B,0xE2,0xFF,0xFE,0x3B,0xBD,0xDB,0xFF, 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFE, +0xFF,0xFB,0xFF,0xFF,0xBF,0xFF,0xFB,0xDF, 0xFF,0xBF,0xFF,0xB7,0xFF,0xFF,0xBF,0xEF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, 0x7F,0xFF,0x1F,0xEF,0xF1,0xFD,0xFF,0xF6, +0xAF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF, 0xFF,0xFF,0xFE,0x9F,0xFF,0xFF,0xFF,0x77, +0xEF,0xF7,0xFB,0xFF,0xFE,0x5F,0xFF,0xFF, 0xBF,0xCF,0xFB,0xF7,0xDD,0xF7,0xF5,0xFF, +0x5F,0xD5,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5, 0xFF,0xFB,0x0F,0xFF,0xFF,0xA9,0xEA,0x7A, +0xFF,0xAF,0x8F,0xFE,0xDF,0xAF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFB,0xDF,0xE5,0x5F, +0xFF,0xFF,0xFF,0xFF,0xFF,0xBD,0x57,0xFF, 0xFF,0x6F,0x77,0xBF,0xF7,0xFB,0xFF,0x7F, +0xBF,0xF7,0xFF,0xFC,0xBF,0xFF,0x9F,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF,0x1F, +0xCF,0xFF,0xFC,0xFF,0xFF,0xFF,0xFF,0xFB, 0x65,0xAF,0xF3,0x7C,0xFF,0x3F,0xDF,0xFF, +0xFD,0xE9,0xFE,0x7F,0xE7,0xFF,0xFE,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFD,0xE3,0xDF,0xFB, +0xDB,0xF6,0xFD,0xEF,0x5B,0xFB,0xFF,0xDF, 0xFC,0xFF,0x3F,0xDF,0xF3,0xFD,0xFF,0x7F, +0xDF,0xEF,0x66,0xFF,0xDF,0xAD,0xEB,0x7A, 0xDE,0xF7,0xF7,0xE7,0xD9,0xFD,0x9F,0x67, +0xD9,0xF6,0x7D,0x9F,0xE7,0xDF,0xF5,0x47, 0xFD,0x65,0x5B,0xD6,0xF4,0xFE,0xFF,0xEF, +0xFF,0x6D,0xF6,0xDD,0xB7,0x6D,0xDB,0x76, 0xDC,0xB7,0x7D,0xFA,0x9B,0xF6,0x6D,0x9D, +0x67,0x59,0xDF,0xF7,0xDD,0xFF,0xEB,0xFE, 0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xE3, +0xD1,0x9F,0xFF,0xBD,0xBF,0xEF,0xFE,0xF7, 0xBF,0xBF,0xF7,0xD7,0x7F,0xDD,0xF7,0x9D, +0xDF,0x7F,0xDF,0xF7,0xFF,0xE0,0x7F,0xFD, 0xC1,0xDF,0xF7,0xFD,0xC7,0x7F,0x7F,0xFB, +0xFF,0xBB,0xEC,0xFB,0x3E,0xFF,0xBF,0xEC, 0xFB,0xFF,0xD8,0x7F,0xBF,0x6C,0xFF,0xBE, +0xFF,0xBF,0xED,0xFF,0xEF,0xFE,0xFB,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEE,0xFF,0xC5, +0xFF,0xAF,0x6F,0xFF,0xFC,0xFD,0x3F,0xE7, 0xFF,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, +0xEF,0xFB,0xFE,0xBF,0x89,0xFE,0xFA,0xBA, 0xFE,0xBF,0xAF,0xFB,0xF6,0xF5,0xD9,0x7D, +0x97,0x65,0xD9,0x74,0x5D,0x97,0x65,0xD3, 0xFE,0xD6,0xFF,0xBF,0xF7,0xFD,0xFF,0x7F, +0xBF,0xCF,0xFB,0xFE,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFF,0xF6,0x8F,0xFB, +0xFF,0xEF,0xFB,0x7E,0xDB,0xFE,0xFF,0xBE, 0xEF,0xEE,0xFB,0xBE,0xEF,0xBB,0xEE,0xFB, +0xBE,0xFF,0xFF,0xDF,0xFF,0x43,0xFF,0xFF, 0xFB,0xEF,0x5F,0xB7,0xFE,0x7F,0xE7,0xF9, +0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xF9, 0xBF,0xFE,0xAF,0x77,0xFD,0xFF,0x2F,0xAF, +0xA7,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xF1,0x7F,0xEF,0xDF, +0xFF,0x97,0xF5,0xEF,0xFF,0xDF,0xFF,0xFF, 0xBF,0xFF,0xBF,0xFF,0xFF,0xFE,0xFF,0xFF, +0xFF,0xE0,0xFF,0xFF,0xF9,0xFE,0x2F,0x8B, 0xE3,0xF8,0xBE,0x77,0x9F,0xF9,0xDA,0x77, +0x9D,0xE7,0x79,0xDE,0x77,0x9F,0xDD,0xFF, 0xFD,0xFD,0x7F,0x5F,0xD7,0xFD,0xFF,0x7F, +0xE7,0xFE,0x7F,0x97,0xE7,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFF,0xAB,0xFF,0xEF,0xFA,0xFE, +0xBF,0xAF,0xFF,0xFA,0xFF,0xFF,0xDF,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF, +0x67,0xFF,0xF7,0xF5,0xFF,0xFF,0xFF,0xDF, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xBD, 0xEB,0xFF,0xFF,0xF7,0xAD,0xEB,0xFF,0xDF, +0xFD,0xFF,0x3F,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0xFD, +0xBF,0xFF,0xCB,0xF4,0xFF,0x7F,0xD3,0xF7, 0xFD,0x3F,0x7F,0xD3,0xF7,0xFF,0xFC,0x3F, +0xFF,0xEA,0xFA,0xBE,0xAF,0xAB,0xEB,0xBA, 0xF4,0x95,0x6B,0x52,0xD4,0xAD,0x2F,0x4A, +0xD2,0xF6,0xBF,0xD2,0x7F,0xF7,0x3F,0xFF, 0xFF,0xF3,0x7F,0xFF,0xFF,0xF7,0xFF,0xBA, +0xDF,0xFB,0xFD,0xFF,0xBF,0xFF,0xFB,0xFF, 0xF8,0x7F,0xEA,0xFF,0xFE,0xFE,0xDF,0xFF, +0xF7,0xFF,0x7F,0xBB,0xFF,0xFF,0xBF,0xDF, 0xFB,0xFF,0xFF,0xBF,0xFF,0xB1,0x7F,0xFF, +0xFB,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, 0xCF,0xFE,0xFF,0xFF,0xEF,0xFF,0xF7,0xFF, +0xFF,0xFF,0xF1,0xFF,0x69,0xBE,0xFA,0xBF, 0xAF,0xE2,0xFF,0xFE,0xFD,0xAF,0xF3,0xFE, +0xFF,0xBF,0xEF,0xFB,0xFC,0xFF,0xFF,0x07, 0xFD,0x95,0xDB,0xDF,0x7F,0xDF,0xAF,0xFF, +0xF7,0xAF,0x36,0xFE,0xBF,0x65,0xEB,0xF6, 0xFE,0x9F,0x6F,0xFE,0x07,0xFF,0xCF,0xFF, +0xF8,0xFE,0xFF,0xCF,0xFF,0xF6,0xFA,0xE7, 0xFB,0xFE,0xFF,0xBB,0xED,0xF9,0xFF,0xFF, +0xFF,0x5F,0xFF,0xFF,0xFF,0x75,0xFF,0xEF, 0x7E,0xFD,0xE0,0xE8,0x5E,0xD3,0xE5,0xF9, +0x3E,0x5F,0xD7,0xF7,0xFF,0xFA,0x2F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0x7F, +0x7F,0xD7,0xF5,0x7D,0x5F,0x57,0xD5,0xF5, 0xEF,0xFF,0xF3,0x7F,0xFC,0x7F,0xFF,0xC7, +0xF1,0xFF,0xFF,0x1F,0xCF,0xB0,0xFF,0x3F, 0xCF,0xF3,0xFC,0xFF,0x3F,0xCE,0xFF,0xE4, +0xFF,0xDF,0x7F,0xFE,0xF7,0xBB,0xFF,0xFF, 0xDF,0xEF,0xEE,0xFF,0xBF,0xEF,0xFB,0xFE, +0xBF,0xBF,0xEF,0xFF,0xD1,0xFF,0xFF,0xFF, 0xFD,0xFB,0xFF,0xFD,0xFF,0xFB,0x9F,0xE9, +0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xBF, 0xFF,0xB3,0xFF,0xFF,0xF7,0xFF,0xFF,0xAF, +0xF7,0xFF,0xB6,0x3F,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFA,0xFE,0xBF,0xFE,0xA7,0xFF, +0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF, 0xFE,0x9F,0xF7,0xF9,0xFF,0x7F,0x9F,0xE7, +0xFF,0xFF,0xFE,0xAF,0x6F,0xFF,0xFF,0xFF, 0x9F,0xFF,0xDF,0xFF,0x7D,0x5F,0xDD,0xFF, +0xFB,0xBF,0xE7,0xBB,0xFF,0xFB,0xDF,0x6D, 0x5F,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xEB,0xF7,0xFF,0xE7,0xEF,0xF7,0xFF,0xFF, 0x7F,0xFF,0xF7,0xFF,0xFC,0x8F,0xFF,0xEF, +0xFD,0xFE,0xFF,0xBE,0xF4,0xF2,0x7D,0xD7, 0xCF,0xFF,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xCF,0x6B,0xFF,0xBF,0x3F,0xFB,0xF2, 0xFC,0x7F,0xEB,0xFF,0x9F,0xFA,0xFF,0xFF, +0x3F,0xFF,0xF3,0xFF,0xFF,0xFD,0x70,0xF7, 0xFF,0xFF,0xBF,0xFF,0xFB,0xD7,0xFE,0xF5, +0x77,0xFF,0x15,0xDD,0x77,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFB,0xCD,0xBF,0xFF,0xFD,0xFF, +0xFF,0xDF,0x37,0xCD,0xF9,0xEC,0xFE,0xEF, 0xBB,0xF4,0xFB,0x3F,0x4F,0xB3,0xFF,0xFD, +0xCB,0xFF,0xE9,0x7E,0x54,0x9F,0xE5,0x4B, 0xB7,0xFF,0xDD,0x7D,0xC7,0x71,0xDD,0x77, +0x5D,0xD7,0x75,0xCD,0x7F,0xD6,0xFF,0xD3, 0xF6,0xF9,0x3F,0x6D,0x95,0xAF,0x7F,0xFE, +0xFF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xF6,0xC7,0xFF,0xAD,0x7B,0xCA,0xFF, +0xBF,0xBF,0xEF,0xFD,0xE3,0xDF,0xB7,0xED, 0xFB,0x7E,0xDF,0x37,0xED,0xE3,0xFB,0xDF, +0xFF,0x52,0x5C,0x15,0xFD,0xCF,0x7F,0xDF, 0xFE,0xEF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEC, +0x7B,0xFE,0xFF,0xFE,0x3E,0x7F,0xDA,0xF7, 0xFD,0xFF,0x7F,0xFF,0xFF,0xFB,0xEF,0xBB, +0x6F,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, 0xF7,0x7D,0xFF,0xD8,0xFF,0xFD,0xBF,0x7F, +0xFB,0xFF,0xFF,0x9F,0xFB,0xFE,0x7F,0x9F, 0xE7,0xF9,0xFE,0x7F,0x9F,0xEA,0x7F,0xF6, +0xBF,0xBD,0x6A,0x5A,0xF6,0xE5,0xBF,0x77, 0x5F,0x6D,0xDD,0x77,0x5D,0xD7,0x75,0xDD, +0x77,0xFF,0xA5,0xBF,0xCF,0xFB,0xFF,0xFF, 0xBF,0xCF,0xFB,0xFD,0xFF,0xBF,0xF3,0xFE, +0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD,0xAB, 0xFF,0xBF,0xBF,0xFF,0xFB,0xFF,0x7F,0xEF, +0xFF,0xBE,0xFB,0xEE,0xFB,0xBE,0xEF,0xBB, 0xEE,0xFB,0xBF,0xFF,0xB5,0xFF,0xD0,0xBC, +0xFD,0x2F,0x4B,0xF7,0xFF,0xFF,0x9F,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x9F, +0xFA,0x8F,0xFD,0xAB,0xFA,0xDA,0xBF,0xAF, 0xB3,0xFD,0xFF,0xBF,0xFB,0xFE,0xFF,0xBF, +0xEF,0xFB,0xFE,0xF7,0xBF,0xFF,0x9F,0xFF, 0x77,0xF7,0xBD,0xFD,0x77,0xDF,0xFF,0x7E, +0xDF,0xED,0xBB,0xFE,0xFF,0xBE,0xEF,0xFB, 0xFE,0xFF,0xFA,0x3F,0xFF,0xBE,0x6F,0x8F, +0xE6,0xF9,0xFE,0x7F,0x9F,0xC7,0xFE,0x7F, 0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFB, +0x7F,0xFF,0x7F,0xCF,0xFF,0xFD,0xFF,0xFF, 0xDF,0xFB,0xAF,0xBF,0xEF,0xFF,0xFE,0xFF, +0x9F,0xEF,0xFB,0xFF,0xFC,0xFF,0xFB,0xFE, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xF7, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF5,0xFF,0xFF,0xFF,0x3F,0xDF,0xF7, +0xFF,0xFF,0x7F,0xEF,0xFE,0xFF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xEF,0xFF,0xB3,0x7F, +0xFF,0x7B,0x5E,0xF7,0xFD,0xFF,0x7B,0x7F, 0xF7,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, +0xDF,0xF7,0xFF,0x17,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xDD,0xF6,0xFC,0xBF,0xCB,0xF2, +0xBC,0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xFE, 0x8F,0xFF,0xFA,0x7E,0xBF,0xA7,0xEB,0xDA, +0xFC,0xBF,0xAF,0x7A,0xFE,0xBF,0xAF,0xEA, 0xFA,0xFE,0xBF,0xAF,0xF4,0xDF,0xFE,0xFF, +0xF3,0x3C,0x7F,0x3E,0xFF,0xCF,0xF8,0xBF, 0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xE7,0xE8, +0xFF,0xFC,0x9F,0xFF,0xFF,0xCF,0xEB,0xB3, 0xE7,0xFB,0x7B,0xF3,0xFE,0xFF,0xCF,0xDB, +0xFB,0xFB,0xBF,0x6F,0x6F,0xDF,0xEC,0x7F, 0xFF,0xFF,0xF7,0xFD,0xFD,0xFF,0xFF,0xFF, +0xFF,0xB2,0xBF,0xFF,0xDE,0xFD,0xBD,0xEF, 0xFB,0xF6,0xDF,0xEA,0xE7,0xDB,0xFE,0xBB, +0xFF,0xEB,0xFB,0xBF,0x9F,0x8F,0xE8,0xFE, 0x3F,0x8F,0xA3,0xF8,0xFE,0x3F,0x8F,0xFF, +0xF8,0x7E,0xFD,0xFD,0x7F,0xFF,0xFB,0xCD, 0xFF,0xFD,0xFF,0x5F,0xEF,0xFD,0xFF,0xFF, +0xDF,0xF7,0xFD,0xFF,0xBE,0x90,0xFF,0xFF, 0xEE,0xFF,0x3F,0xBF,0xF3,0xBB,0xFE,0xB7, +0xAB,0xFA,0xFE,0xAF,0xAD,0xEA,0xFA,0xDE, 0xAB,0xFF,0x63,0xFF,0xFE,0xF2,0xFF,0xB3, +0xFF,0xDF,0xEE,0x7D,0xFF,0x03,0xF1,0xF4, 0x3F,0x1F,0xC3,0xF1,0xEC,0x7F,0xFE,0x6F, +0xFF,0xFB,0xFB,0xFF,0x9F,0xFF,0xBF,0xFF, 0x7B,0x5F,0xFD,0xFF,0xDF,0xF7,0xFD,0xFD, +0x7F,0x7F,0xDF,0xFE,0xCF,0xFB,0xFF,0xFF, 0xAF,0xFB,0xFF,0x1F,0xEF,0xA5,0xFD,0xBF, +0xDF,0xFB,0x7D,0xFF,0xBF,0xDF,0xFB,0xFF, 0xFD,0x3B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, +0xAF,0xF3,0xFF,0xFB,0x7F,0xBF,0xD7,0xFB, 0xBF,0x7F,0xBB,0xF7,0xFF,0xF8,0x7F,0xFF, +0xFA,0x5F,0xD7,0xFF,0xDF,0x7F,0xEF,0xFF, 0xFF,0x7F,0xDB,0xF7,0xFD,0xFF,0x7F,0xDF, +0xB7,0xFB,0xEC,0xFF,0xFF,0xF7,0xBF,0xEF, 0xFD,0xFC,0xFB,0xFF,0xEF,0xF0,0xFE,0x3F, +0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xEF,0x8D, 0xFF,0xFF,0xEF,0x7F,0xBF,0xFF,0xFB,0xFF, +0xDB,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0xD8,0xFF,0x2E,0x7F, +0xBE,0xEF,0xFE,0x6E,0xFF,0xBF,0xF9,0xFF, 0xFF,0xF3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFC,0x66,0xBE,0x47,0xF3,0x7F,0xDF,0xFE, 0x87,0x9F,0xFF,0xFF,0xFF,0xFF,0xE7,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xD6,0x6F,0x7C, 0xFB,0x4F,0xD2,0xFF,0xFD,0x2B,0xFE,0xFF, +0xFF,0xFD,0x5F,0xD7,0xD5,0xF5,0x7D,0xFF, 0xFF,0xFF,0xBF,0x9B,0xFF,0xFF,0xDF,0xB7, +0xFF,0xFF,0xDF,0xFF,0x3F,0xCF,0xFE,0x7F, 0xBF,0xEF,0xFB,0xFC,0xFF,0x3F,0xFF,0xD9, +0xBF,0xFE,0x97,0xEC,0x8F,0xB7,0xFE,0x9B, 0x7D,0xFD,0xB7,0xDD,0x77,0x1D,0xC7,0x71, +0xDD,0x77,0x5D,0xD7,0xF3,0x6F,0xFD,0x3F, 0x73,0xDD,0xAF,0xFD,0x7A,0xFF,0xFF,0xAF, +0xFE,0xFD,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0x66,0x7F,0xFF,0xFF,0xBF,0xBF,0xFF, +0xFB,0xFF,0xF7,0xDF,0xFD,0xFB,0x7D,0xDF, 0xB7,0xCD,0xF3,0x7C,0x5F,0x3F,0x91,0x3F, +0xFF,0x3D,0xEF,0x7B,0xFF,0xFC,0xFF,0xCA, 0xEF,0xFE,0xFF,0xBD,0xEF,0xFB,0x1E,0xE7, +0xBB,0xEC,0x7F,0xB3,0xFF,0xFD,0x9F,0xFF, 0xFF,0xFE,0xFF,0xFF,0x7F,0xBF,0xFB,0xFE, +0xFF,0xBF,0xEF,0xFB,0xEE,0xFB,0xBF,0xDF, 0x67,0xFF,0xFF,0xBF,0xEF,0xDB,0xFF,0xBC, +0xFE,0x7F,0xFB,0xFF,0x9F,0xEF,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x87,0xFF,0xEE, +0xFB,0xBE,0xE5,0xBF,0xEF,0xF9,0xD7,0x65, 0xF7,0xDD,0xE7,0x7D,0xDF,0x77,0x5D,0xD7, +0x7F,0xF8,0x9B,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xBF,0xEF,0xFB,0xFF,0x7F,0xCF, +0xF3,0xFC,0xFF,0xBF,0xEF,0xFF,0xDB,0x3F, 0xEF,0xFB,0xFE,0xFF,0xDF,0xFF,0xFE,0xFB, +0xBB,0xEF,0xBF,0xEF,0xBB,0xEE,0xFB,0xBE, 0xEF,0xBB,0xFF,0xFC,0x7F,0xFD,0x3B,0x5B, +0xD6,0xE5,0xFD,0x4F,0xC3,0xFB,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, +0xB4,0xFF,0xFA,0xBC,0x8F,0xB2,0xE9,0xD2, 0x2E,0xCF,0xFB,0xFF,0xBF,0xEF,0xFB,0xFE, +0xFF,0xBF,0xEF,0xFB,0xFF,0xEC,0xFF,0xFD, 0xFD,0x7F,0xDF,0xF7,0xE4,0xDF,0x5F,0xFF, +0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xC3,0xFF,0xEF,0xE6,0xF8,0xFE, +0x3F,0x8B,0x83,0xF9,0xFE,0x7F,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x17, +0xFD,0xFF,0xFF,0xFF,0x7F,0x5F,0xF7,0x2C, 0xFF,0xFF,0xFF,0xFE,0x7F,0xFF,0xE7,0xF9, +0xFE,0x7F,0x9F,0xFE,0x2F,0xFF,0xFF,0xEF, 0xFF,0xFE,0xBF,0xEF,0xAD,0xFF,0xFF,0x7F, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFE,0xDF,0xFF,0xDF,0xFF,0xFD,0xFD,0x7F, +0xDF,0xF7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0x3F,0xFE, +0xF7,0xFD,0xEF,0x7A,0xFF,0xB1,0xBD,0xFF, 0x7F,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD, +0xFF,0x7F,0xF3,0x27,0xFF,0xDF,0xFF,0xDD, 0xFF,0xFC,0x9B,0xFF,0xCB,0xFC,0xBF,0x2F, +0xCB,0xF2,0xFC,0xBF,0x2F,0xC9,0xFF,0xDE, 0xFF,0xDF,0xAF,0xEB,0xDA,0xFE,0xBB,0xAF, +0xEB,0xF8,0xF7,0xAF,0xE8,0xFA,0xFE,0xBF, 0xAF,0xEB,0xF2,0xFF,0xFD,0xFF,0xFF,0xEF, +0xBD,0xD7,0xBF,0xFF,0xFF,0xDE,0x8F,0xB8, 0xDE,0x37,0x8D,0xA3,0x78,0xDA,0x3F,0x8F, +0xFF,0xA1,0xFF,0xFF,0xFB,0xFB,0xFF,0xFF, 0xFF,0xFF,0xA7,0xBD,0xFB,0x76,0xFD,0xBF, +0xEF,0xDB,0xFE,0xBB,0xBF,0xFE,0x27,0x7F, 0xFF,0xFE,0xFE,0xFD,0xF5,0xFF,0xEF,0xF5, +0xDF,0x1F,0xE7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xFF,0xCD,0xFD,0xAE,0xFF,0xFA, +0x3E,0x3F,0xAB,0xFD,0xF8,0x7E,0x8F,0xE3, 0xF8,0xFE,0x3E,0x8F,0xE3,0xF8,0xFF,0xFE, +0x1F,0xEF,0xDF,0xBF,0xFE,0xDE,0xDF,0xD9, 0xFF,0xDF,0xBC,0xFF,0xFF,0x7F,0xFF,0xEF, +0xFD,0x7F,0xDF,0xF7,0xF9,0x3F,0xFE,0xFF, 0xFF,0x6F,0xFE,0xDE,0xBF,0xF7,0xED,0xEA, +0xFD,0x8F,0x83,0xF8,0xEA,0x3F,0x8F,0xEF, 0xFF,0xF4,0x7F,0xFF,0xEF,0xEF,0x7B,0xF3, +0xF1,0x5F,0xFF,0xFF,0xF1,0x3B,0x7F,0xDF, 0xF7,0xFD,0xFF,0xFF,0xFF,0xFF,0xE0,0xFF, +0xFF,0xFF,0xF7,0xFF,0x6F,0xFF,0x7F,0xFF, 0xFF,0xF7,0xDE,0xF7,0xBF,0xEF,0xFB,0xF7, +0xFD,0xFF,0xFF,0xF5,0xFA,0xFF,0xFF,0xFB, 0xE7,0xFF,0xF3,0xF8,0x7F,0xF3,0xDF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x1F,0xEF, 0xBB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, +0xFF,0x7F,0xFF,0x9F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xCF,0xFF,0x37,0xFF,0xFF, +0x7F,0xDF,0x77,0x5D,0xE7,0xFC,0xFF,0xBF, 0xF7,0xF5,0xFB,0xFF,0xFF,0xD7,0xF5,0xFB, +0xFF,0xFF,0x45,0xFD,0x7F,0xEA,0xFD,0xBE, 0xBF,0xDF,0xF7,0xFF,0xFF,0xDB,0xFB,0xFE, +0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0xFB,0x5F, 0x7F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFE,0xFF,0xEF,0xFD,0xFF,0x7F,0xDF, 0xFF,0xEF,0xFB,0xF8,0x0F,0xF3,0xFF,0xF9, +0x2E,0xFB,0xFE,0xFC,0xF3,0xEF,0xFF,0xFF, 0xBF,0xFF,0xFB,0xE7,0xFF,0xFE,0x7E,0xFF, +0xC0,0x6B,0xCF,0xFF,0x34,0xDF,0xF1,0xFD, 0xFF,0xEF,0xFF,0xFF,0xFF,0xDF,0xF7,0xFD, +0xCF,0x7F,0x9C,0xFD,0xFD,0x6C,0xF7,0xFF, 0xF6,0xFD,0xEB,0x2B,0x9F,0xFF,0xFC,0xFE, +0x7E,0xFF,0xFF,0xFF,0xFF,0xD7,0xF3,0xF7, 0xFF,0xFB,0xE1,0xBF,0xFF,0xEB,0x7A,0xDE, +0xD7,0xFB,0xFF,0xF9,0xFE,0xFF,0xFF,0xF3, 0xDE,0x7F,0xFD,0xE7,0x7F,0xFF,0xFD,0xBB, +0xFF,0xFF,0x7E,0xCC,0xF6,0xAF,0x5F,0x7F, 0xFE,0xF4,0x7D,0xF7,0xFD,0xBB,0x6E,0xDB, +0xB7,0xFF,0xF7,0xDF,0x66,0xFF,0xFF,0xF7, 0x3D,0xCF,0xDE,0xBD,0xFF,0xFF,0xDE,0xDB, +0x8D,0xF7,0x7E,0xDF,0xB7,0xEF,0x7F,0xFF, 0xF6,0x87,0xFF,0xFF,0xEF,0xFE,0xDE,0xBF, +0xFF,0xFF,0xFF,0xBB,0xEF,0xFD,0xFF,0x7B, 0xDE,0xF7,0x3F,0xFF,0xBF,0xFB,0xDB,0xFF, +0xF2,0xB6,0xFD,0xBD,0x7F,0xE7,0xFF,0xFF, 0xFF,0x6F,0xF7,0xFF,0xFF,0xFF,0xFE,0x77, +0xFF,0xBF,0xF8,0xAF,0xFF,0xDF,0xBF,0xFF, 0xBF,0x7F,0xFB,0xFF,0xFF,0xFF,0xDB,0xFE, +0xFF,0xBF,0xFF,0xFA,0xFF,0xFD,0xFF,0xF6, 0x7F,0xFF,0x9F,0xFF,0xFF,0x3F,0xEF,0xF8, +0xEE,0x7E,0x9F,0xBA,0xFE,0xBF,0x8F,0xEF, 0xFE,0xFE,0xF9,0xFF,0xFA,0x7F,0xFE,0x7E, +0xBF,0xAF,0xFB,0x96,0xFD,0x9F,0xEF,0x5E, 0x65,0xBE,0xEF,0x5B,0xB6,0xFF,0xBE,0xE3, +0xFF,0xB5,0xBF,0xFF,0xFD,0xFF,0x7F,0xFF, 0xEF,0xDF,0xFE,0xFF,0xBF,0xFB,0xFE,0xFF, +0xBF,0xCF,0xFF,0xFF,0xFF,0xFD,0x9B,0xFF, 0xFE,0xFB,0xFE,0xDF,0xFF,0x7F,0xFF,0xF7, +0xFE,0xFF,0xDF,0xFB,0xFB,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xB7,0xFE,0xFA,0xFF,0xAB, +0xEF,0xFF,0xFD,0xB5,0x7B,0x7F,0xFB,0xF7, 0xFD,0xFF,0xFF,0xDD,0xFF,0xEF,0x8F,0xFF, +0x2F,0xFF,0xFB,0x7C,0xFF,0x3F,0xDF,0x73, 0xEB,0xFE,0x3F,0xFF,0xEF,0xFB,0xFE,0xFF, +0xEF,0xFD,0xFF,0xBF,0xFD,0x0F,0xFF,0xFF, 0xFF,0xF5,0xF9,0xFF,0x7F,0xD7,0xFD,0xFF, +0xDF,0xFF,0xF7,0xFB,0xFF,0x7F,0xBF,0xFF, 0xFF,0xF0,0x9F,0xFF,0xFE,0x7F,0x8B,0xE3, +0xF9,0xDE,0x27,0x9B,0xE6,0xBE,0x7F,0x9B, 0xC3,0xF8,0xDE,0x7F,0x9D,0xE7,0xFE,0x7F, +0xFF,0xFF,0x5F,0xD7,0xFF,0xFF,0xFF,0x4F, 0xFB,0xFF,0xFF,0x7F,0xFF,0xAF,0xFF,0x9F, +0x7F,0xFB,0xFF,0xE8,0xFF,0xFF,0xFE,0xBF, 0xAF,0xFF,0xFF,0xFE,0xBF,0xEF,0xF7,0xFF, +0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFC,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, +0xFD,0x3F,0xCF,0xFF,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFD,0x7F,0xFF,0xFF,0x93,0xFF,0xFF, +0x7A,0xDF,0xF7,0xFF,0xFF,0x7B,0x7F,0xB7, 0xEF,0xFF,0xFF,0xFD,0xBF,0xFD,0xFB,0xFF, +0xF7,0xFF,0xD7,0xFF,0xFF,0xFF,0xFC,0x9F, 0x6F,0xCB,0xFF,0xF4,0xBB,0xDF,0xD6,0xFD, +0xBF,0x2F,0xD3,0xF7,0xFF,0xDF,0xFF,0xCF, 0xFF,0xFA,0xBE,0xBD,0xAF,0x6A,0xDA,0xBE, +0xBB,0xAB,0x3A,0xBE,0x2D,0xAE,0xEB,0xDA, 0xF6,0x3F,0xAD,0xF5,0xDD,0xFF,0xCF,0xF1, +0xFF,0xF9,0x7F,0xFF,0x73,0xFE,0xFF,0xCF, 0xC3,0xF4,0xF7,0x2F,0xF3,0xFF,0xFC,0xFF, +0x7C,0x1F,0xFF,0x3F,0x4F,0xFF,0x7E,0xFF, 0xEF,0xBD,0xF6,0xFE,0xFF,0x2B,0xEF,0xDC, +0xFB,0xFD,0xFF,0xFB,0xFF,0xEA,0x7B,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xF7,0xDF,0xFF, +0xE3,0x7D,0xFF,0xB7,0xFF,0xBF,0xFF,0xFF, 0xDF,0xFF,0xF8,0xFF,0xBF,0xFF,0xBF,0xEB, +0xE7,0xFA,0xFE,0x3D,0xBF,0xE9,0xFC,0xBF, 0xFF,0xFA,0xFB,0xFE,0xFF,0xFF,0xFF,0xD9, +0xFF,0xFF,0xFF,0xF6,0x7F,0xFF,0xF6,0x7D, 0xFF,0xDF,0xCF,0xFD,0xBF,0xFB,0xEF,0x7E, +0xFF,0x7F,0xFF,0xFF,0xD3,0xFF,0xFD,0xFB, 0xFF,0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xBF, +0xFE,0xFF,0xF7,0xEF,0xFF,0xFF,0xFF,0xFB, 0xFF,0x87,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF, +0x7B,0xFE,0xFF,0xFE,0x3B,0xF7,0xF7,0xFF, 0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, +0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFF,0xAD,0xFF,0xFE,0xF7,0xFF,0xFF, +0x5F,0xFF,0xFF,0xDF,0xFF,0xFD,0xFF,0xF5, 0xFF,0xDF,0xFF,0xBD,0xFF,0xE9,0xFF,0xC7, +0xF3,0xFF,0xFF,0xF7,0xFF,0xF3,0xFF,0xF8, 0x3B,0xFF,0xFF,0x7B,0xDF,0xBF,0xFB,0xEF, +0xFB,0xFF,0xFB,0xF7,0xF7,0xBB,0xFF,0xFF, 0xFF,0xFF,0xFB,0xFF,0xFE,0x7F,0xF3,0x7F, +0x5E,0xB7,0xBF,0xFD,0x7F,0xFF,0xF9,0x7F, 0xFB,0xFF,0xEB,0xFD,0x7F,0x7F,0xFF,0xEF, +0xFB,0xE0,0x3F,0xFE,0xBF,0xBF,0xDF,0xFF, 0x7E,0xFF,0xF7,0xFF,0xFF,0xFE,0xBF,0xFF, +0xDB,0x78,0xFF,0xFF,0xFF,0xEE,0xA1,0xBF, 0xF5,0xDE,0xFB,0xF7,0xFF,0xFB,0xFF,0xFF, +0xFF,0xFF,0xFB,0xFF,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xEF,0xF0,0xFF,0xFF,0xFF,0xF3, +0xF7,0xFF,0xEF,0xFF,0xE7,0xCF,0xFF,0xFB, 0xFF,0xEF,0xFF,0xFF,0x9F,0x9F,0xEF,0xFC, +0x16,0xBF,0xFE,0xF3,0xE4,0xFF,0xFF,0xC6, 0xFF,0xE7,0xFF,0xFF,0xFD,0xFF,0xBF,0xFF, +0xFF,0x3F,0xFF,0xBF,0xD6,0xAF,0x7F,0xFE, 0x6B,0x7E,0x7F,0xFF,0xAF,0xFF,0xFF,0xBF, +0xFF,0x5F,0xFF,0xFE,0xFF,0xFF,0xFE,0xFF, 0xFF,0xBD,0xDB,0xFF,0xFE,0x5F,0xF2,0xFF, +0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xEF,0x7F,0xFF,0xFF,0xFF,0xFF,0xDE,0xBF, +0xFF,0xFF,0xEF,0xFB,0x77,0xFE,0xBD,0x7F, 0x5F,0xFF,0xFF,0xFF,0xDF,0x6F,0xED,0xFF, +0xFD,0xFF,0x7F,0xFD,0x6F,0xFF,0xFF,0x77, 0xDA,0xCF,0xFD,0x5F,0xFF,0xBF,0xFF,0xFF, +0xDF,0x7F,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, 0x66,0x7F,0xFF,0xFE,0xBF,0xE7,0xBF,0xFA, +0xFF,0xFE,0xFF,0xFF,0xFF,0xDF,0xFF,0x59, 0xEF,0xFF,0xEF,0xFB,0x7F,0x89,0xFF,0xFF, +0xE9,0xFF,0x6F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xFF,0xFF,0x7F,0xF2,0xF7,0xFF,0xFF,0xEF, +0xF8,0x7F,0xFB,0xFF,0xFD,0xFF,0xFF,0xD9, 0xFF,0xEF,0xBB,0xFF,0xFF,0xFF,0xBF,0xEF, +0xDE,0xFF,0xFF,0x9F,0x7F,0xDF,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xAF, +0xFF,0xFF,0xF7,0x3F,0xEB,0x9F,0xFE,0x7F, 0x9E,0x7F,0x9F,0xFE,0x87,0xFF,0xED,0xDB, +0x56,0xFF,0xBF,0xAF,0x0B,0xD2,0xFF,0xEF, 0xDB,0x6E,0x7D,0xBD,0x6F,0xF8,0xFE,0x3F, +0xFA,0x5B,0xFF,0xFD,0xBF,0xEF,0xFF,0xBF, 0x6F,0xDB,0xE6,0xFF,0xFF,0x3F,0xFF,0xDF, +0xFE,0xFF,0xFF,0xFF,0xFF,0xDA,0x3F,0xFF, 0xFB,0xFE,0xFE,0xFF,0xFF,0xDF,0xF7,0xBD, +0xFF,0xFD,0xFF,0xFE,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xF1,0x5F,0xFD,0x9F,0xDF,0xFD, +0xFF,0xFD,0x7F,0xFF,0xFF,0xFF,0xFF,0x76, 0xFA,0xFF,0xFF,0x7F,0xE3,0xF8,0xFF,0xAE, +0xFF,0xFB,0x7E,0x9D,0x73,0xFF,0xFA,0x7F, 0xDF,0xFF,0xFF,0x7F,0xFF,0xFB,0xCD,0xFF, +0x7F,0xEF,0xFB,0xFF,0xFD,0xFF,0xF7,0x7F, 0x7F,0xEF,0xFF,0xED,0xFF,0xFF,0xFF,0xB5, +0xFF,0xBF,0xFF,0xBF,0xFD,0xEF,0xDB,0xF7, 0xFF,0x93,0xFF,0xEF,0xE2,0xF9,0xBE,0x7F, +0x8B,0xE7,0xF9,0xFE,0x6B,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x47,0xFF, +0xFF,0xFD,0xFF,0x9F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xF5,0xFF,0x9F,0xFF,0xF7,0xFE, +0xFF,0xBF,0xFE,0x6F,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xAF,0xFF,0xFF,0xFF,0x7F,0xFB, +0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xDF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF,0xDF, +0xFF,0xFF,0xFF,0x5F,0xFF,0xFF,0xFF,0xFF, 0x5F,0xFB,0xFE,0xFF,0xF8,0x37,0xFF,0xFF, +0xEF,0xFF,0x7F,0xFE,0xBF,0xFF,0xFF,0xFE, 0xBF,0xFF,0xFF,0x7F,0xFF,0xBF,0xFD,0xFF, +0x7F,0xFA,0x7F,0xFF,0xFF,0x6F,0xFF,0xFF, 0x7D,0xFF,0xCF,0xFF,0xFF,0xFF,0x4F,0xFF, +0xF2,0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0xBF, 0xFF,0xAE,0xEB,0xFA,0xFE,0xBB,0xAD,0xEB, +0xFA,0xF7,0xAF,0x6B,0xFA,0xF6,0xBF,0x25, 0xE9,0xF2,0x7F,0x45,0xFF,0xFF,0xFD,0xF7, +0xF7,0xBF,0xFF,0xDF,0xFF,0xFF,0xBF,0xFB, 0xFF,0xDF,0xF3,0xFF,0xF7,0x3F,0xCF,0xFF, +0xA1,0xFF,0xFF,0xBF,0xE7,0xFF,0xFF,0x7F, 0xFF,0x3D,0xFF,0xFF,0xFF,0xF7,0xFF,0x2F, +0xFF,0xFB,0xF5,0x7F,0xFE,0x57,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7, +0x3F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD,0xFE, 0xF7,0xEE,0xAF,0xFE,0xEE,0xE7,0xFA,0xFF, +0xFE,0x9D,0xF9,0x5E,0xFE,0xFF,0xEB,0xFF, 0xFF,0xDF,0xA7,0xFF,0xFF,0xFF,0xFC,0xDB, +0xFF,0xFF,0xFF,0x7E,0xFB,0xFF,0xFF,0xEF, 0xFB,0xFD,0xFF,0xDB,0xFF,0xFF,0xFF,0xEF, +0xFF,0xFF,0xFF,0xFD,0xBF,0xFE,0xBF,0xFF, 0x6F,0x7F,0xFF,0xF7,0xFF,0xFF,0xF9,0xFF, +0xF7,0xFF,0xBF,0xDE,0xF7,0xFF,0xFF,0xFF, 0xFA,0x7F,0xFD,0xBF,0x5F,0xFF,0xFF,0xBF, +0xFF,0xED,0xFF,0xF7,0xBF,0xFF,0xFF,0xEF, 0xFF,0xDF,0xFF,0xFF,0xFF,0xE6,0xFF,0xFB, +0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEB,0xFF, +0xFD,0xFF,0xF5,0xFF,0xF6,0x7F,0xDF,0xBD, 0xCF,0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF, +0xFF,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3, 0xFF,0xEE,0xBF,0xFF,0x7D,0xEF,0xFE,0xFF, +0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFE, 0xFF,0xFF,0xFF,0xFF,0xE7,0xFF,0xB5,0xAE, +0xFF,0xFF,0xB6,0xFE,0xBF,0xFF,0xFF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0x27,0xFF,0xEF,0xFE,0x7F,0xDF,0xFF, 0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFD,0xFF,0xF7,0xF9,0x9F,0xFF, 0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, +0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x0F,0xFF,0xE7,0xBF,0xFE, +0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFC,0xBF, 0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xC4, +0x6B,0xFF,0x29,0x1F,0xFB,0xAF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0x1B,0xFE,0xFF,0xFC, +0x6F,0xFF,0xFF,0xFD,0x6A,0xF7,0xD7,0xF5, 0xBF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFE,0xBF,0xFF,0xFF,0xFA,0xFF,0xFF,0xF7, 0xFB,0xDD,0xBF,0xFF,0xE7,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0x7F,0xFF, 0xFF,0xF5,0xFF,0xFF,0xF7,0xFD,0xB3,0xEF, +0xFD,0x7E,0x5D,0xFF,0xFD,0xFF,0xFF,0xFF, 0xFD,0x7F,0xD2,0xF5,0xFB,0x7E,0xCB,0xB7, +0xFF,0xFF,0xFF,0xC6,0xFF,0xFD,0xEE,0x63, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xFD,0x65, +0x5B,0xDF,0xFF,0xD5,0xFF,0xFF,0xFF,0xF6, 0xE7,0xBF,0xF7,0xA9,0xFF,0xFF,0xED,0xFF, +0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFF,0xFF, 0xAF,0xFF,0xFF,0xFF,0xF8,0x1B,0xFF,0xE3, +0xD0,0xBF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF, 0xFF,0xD7,0xFF,0xFF,0xFF,0x5F,0xFF,0xFF, +0xFF,0xFF,0xAF,0xFF,0xDB,0x76,0xBF,0xFF, 0x7F,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF, +0xFB,0xFE,0xFF,0xFF,0xFF,0xBF,0xF2,0x7F, 0xFF,0x9F,0xFE,0xBD,0xFE,0x7F,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF7,0x3F,0xEC,0x7F,0xF6,0x95,0xBB, +0xEF,0xF8,0xFE,0xFC,0xBF,0x2F,0xDA,0xFC, 0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xEF,0xFF, +0xA9,0xBF,0xCF,0xFB,0xFF,0xFF,0xFF,0xFE, 0xDD,0xB7,0x6D,0xF6,0xD9,0xB6,0x6D,0x9B, +0x76,0xD9,0xBF,0xFB,0xFD,0xA3,0xFF,0xBF, 0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0x7F,0xDF, +0xFD,0xEF,0x7B,0xDE,0xF7,0xFD,0xEF,0x7F, 0xFF,0xFF,0x05,0xFF,0xFA,0xFE,0x7F,0xEF, +0xE3,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, 0xFF,0x5F,0xFF,0xFF,0xFD,0x7F,0xFB,0xAF, +0xFF,0x63,0xC8,0xFF,0xBF,0xEF,0xFF,0xFF, 0xFA,0x7F,0xFF,0xFF,0xFF,0xFE,0x9F,0xF7, +0xFF,0xFA,0xBF,0xFE,0x9F,0xFB,0x7F,0xFF, 0xFF,0xEF,0xD7,0xFF,0xFF,0xF5,0xFF,0xFF, +0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xBF,0xFF, 0xF9,0xBF,0xFF,0xBE,0x27,0x9F,0xE7,0xF9, +0xFE,0x7F,0x8B,0xE7,0xFE,0x7F,0x9F,0xE2, 0xF9,0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF, +0xFF,0xFF,0xFB,0xFE,0xFF,0xFF,0xFF,0xD7, 0xFF,0xFF,0xFF,0xFF,0xF5,0xFF,0xFF,0xFF, +0xD7,0xFF,0xFA,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFD,0xFF,0xFF,0xFF,0xAF,0xF7,0xFF,0xFF, +0xFF,0xEB,0xFF,0xFF,0xFF,0xAF,0xFF,0xC4, 0xFF,0xF7,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, +0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xD7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFB,0x7A, +0xDF,0xF7,0xFD,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0x7F,0xFF,0xAF,0xFF,0xFF,0xFF,0xF7, +0xEF,0xE3,0xFF,0xDD,0xD2,0xFF,0xDF,0xFF, 0xFF,0xF2,0xFC,0xBF,0xCB,0xF6,0xFD,0xBF, +0x2F,0xCB,0xFF,0x7F,0xDF,0xDE,0xAF,0xFF, 0xDA,0xEE,0xBF,0xAF,0xE9,0xFA,0xF4,0xBD, +0xAF,0x5A,0xAE,0xBB,0xAB,0x6B,0xDA,0xDE, 0xBF,0xAD,0xD7,0x5E,0xFF,0xFF,0xBF,0xFC, +0xFF,0xDF,0xFD,0xFF,0xFF,0xFF,0xFF,0xDF, 0xF7,0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFA, +0x1F,0xFF,0xFE,0xFB,0xEF,0xBF,0xFD,0xFF, 0xFD,0xBD,0x77,0xFF,0xFF,0xFF,0xFF,0x9D, +0xEF,0xFF,0xFF,0xFF,0xEF,0x7D,0xFF,0xFB, 0xFE,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEE, 0xBF,0xE4,0xFB,0xFF,0xFE,0x3F,0xFE,0xFF, +0xFF,0xFF,0xFF,0xAF,0xEA,0xFE,0xBF,0xAF, 0xEB,0xFA,0xFE,0xFF,0xFF,0xFF,0x55,0xF6, +0xFF,0xFE,0xF7,0xFF,0x7F,0xFF,0xEB,0xF7, 0x5F,0xC5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF, +0x6F,0xFB,0xFF,0x8A,0xFF,0xFF,0xFF,0xFF, 0xEB,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0xBF, +0xEF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0x77,0xDF,0xFB,0xFF,0xFD,0x7F,0xEF,0xFF, +0xFF,0xFF,0xBF,0x7F,0xFF,0xDF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xFF,0xFE,0xEF,0xDF,0xFF, +0xFE,0xFF,0x9F,0xEF,0x7D,0xFF,0xF7,0xFF, 0x7F,0xFF,0xFF,0xDF,0xF7,0xFD,0xFF,0xEF, +0xDF,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0xFB, +0xFD,0xFF,0xBF,0xDF,0xD1,0xFF,0xF8,0x3B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0x7E,0xDB,0xFD,0xFF,0x77,0xDB,0xB7,0x7D, 0xBF,0xFB,0xFF,0xF8,0x7F,0xED,0x7B,0x5E, +0xFF,0xFE,0xFF,0xFF,0x4F,0xD7,0xFD,0x7F, 0xDF,0xD7,0xF5,0xFF,0x7F,0xFF,0xFF,0xFF, +0xF2,0x3F,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFF,0xBF,0xEF,0xFE,0xFF,0x3B,0xEE,0xFF, +0xFC,0xEF,0xFF,0xFF,0xFF,0x85,0xFF,0xFD, 0xFE,0xFF,0xF5,0xFF,0xFF,0xFE,0xFF,0xDF, +0xFB,0xFF,0x5F,0xBF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xA8,0xFF,0xFF,0x9F,0x9E,0xFF, +0xFF,0xFF,0x7F,0xF3,0xFF,0xFF,0xCF,0xFF, 0xF7,0xFD,0xFF,0x7F,0xFF,0xFF,0xFC,0x16, +0xBF,0xCF,0xA3,0xE5,0xEF,0x7F,0xFF,0xF3, 0xE4,0xFF,0xCF,0x93,0xFC,0xFF,0x3F,0xCF, +0xFF,0xFF,0xFF,0xD6,0x0F,0x7D,0xBF,0x6E, 0xFB,0xF4,0xFC,0xAF,0x6D,0xDB,0x77,0xB7, +0x6D,0xDB,0xF6,0xFD,0xBF,0xFF,0xFF,0xFF, 0xBF,0x9B,0xFA,0xDE,0xB7,0xB7,0xED,0xF9, +0x7E,0xB7,0xAC,0xEB,0xD6,0xB3,0xAD,0xEB, 0x7A,0xDF,0xFF,0xFF,0xFF,0xD8,0xBF,0xFF, +0xB7,0xED,0x9F,0x6F,0xDD,0xF7,0x68,0xDB, 0x37,0xB3,0x6C,0xDB,0x36,0xCD,0xB3,0x7F, +0xFF,0x7F,0xF5,0x6F,0xFD,0xEF,0x79,0x3D, 0xF7,0x93,0xE4,0x7A,0x9E,0xAD,0xEA,0x7A, +0x9E,0xF7,0xBD,0xEF,0xFF,0xFF,0xFF,0x76, 0x7F,0xFB,0xC6,0xFF,0xBB,0xEF,0xDA,0xFE, +0xFD,0xBF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xFB,0xFF,0xA5,0xFF,0xFD,0xAB, +0x6F,0x78,0xDE,0x17,0x8F,0x79,0xDF,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xFF,0xFB, +0xFF,0xFB,0xFF,0xEF,0xFB,0xEF,0xFB,0xFE, 0xFF,0xBB,0xDA,0xF3,0xEF,0x3B,0xCE,0xF3, +0xBC,0xEF,0x3F,0xCF,0xDF,0xFF,0xB7,0xFF, 0xFF,0xFF,0xCF,0x73,0xFF,0xBF,0xEF,0xFF, +0xF3,0xFF,0x3F,0xCF,0xF3,0xFC,0xFF,0x3D, 0xCF,0x9F,0xFE,0x07,0xFF,0xAF,0xEB,0xFE, +0xFD,0xBF,0xEF,0xEB,0xFA,0xFF,0xAF,0xEB, 0xFA,0xFE,0xBF,0xAF,0xFB,0xFE,0x3F,0xFB, +0x9B,0xFF,0x7F,0xDF,0xFF,0xF3,0xFE,0xFF, 0xDE,0xF7,0xBF,0x7B,0xDE,0xF7,0xBD,0xEF, +0x7B,0xFE,0xFF,0xFF,0xDF,0x3F,0xFE,0xFF, 0xB7,0xFF,0xEF,0xF7,0xFF,0xBF,0xED,0xFE, +0xDF,0xB7,0xED,0xFB,0x7E,0xDF,0xFF,0xFF, 0xFF,0xFD,0x5F,0xEF,0xEB,0xFA,0xFE,0xF5, +0xBF,0x6F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xF8,0xFF,0xA8,0xFF, +0xFF,0xBF,0xEF,0xFB,0x6A,0xFB,0xB7,0xEF, 0xFB,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, +0xEF,0xFB,0xFF,0xE0,0xFF,0xFF,0xFD,0x7F, 0x5C,0xD7,0x7D,0xDF,0xF3,0x5C,0xF5,0xCD, +0x73,0x5E,0xD7,0xB5,0xFD,0x7F,0xEF,0xFF, 0xDB,0xFF,0xFF,0xE2,0xF8,0xBE,0x2F,0x8F, +0xE7,0xF8,0xBE,0x6B,0xE2,0xF8,0xBE,0x2F, 0x8B,0xE2,0xF9,0xFE,0x7F,0xE7,0xFF,0xD7, +0xF5,0xFD,0x7F,0xFF,0xF7,0xF5,0xFD,0x7F, 0xD7,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF, +0xFF,0xFF,0x8F,0xFF,0xAF,0xEB,0xFA,0xFF, 0xFF,0xBF,0xEB,0xFA,0xFF,0x2F,0xEB,0xFA, +0xFE,0xBF,0xAF,0xEB,0xFF,0xFF,0xFE,0x5F, 0xFF,0x5F,0xFF,0xFF,0xFD,0xFF,0xFF,0xD7, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFE,0xB7,0xFD, +0xFF,0x7E,0xDF,0xF7,0xAD,0xFF,0x7F,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, +0xF6,0x7F,0xFF,0xFF,0xFF,0xDB,0xF6,0xFC, 0xAF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xEC,0xBF,0xFF, 0xAF,0xEB,0xFA,0xF6,0xAB,0x8F,0xEB,0xFA, +0xF7,0xA5,0xEB,0xFA,0xBE,0xBF,0xAF,0xEB, 0xFA,0xFF,0x6D,0xFF,0xFF,0x7F,0xDF,0x33, +0xDD,0xFF,0x7F,0xFE,0xF7,0xFC,0x7F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xA9, +0xFF,0xFD,0xFF,0xFF,0xFE,0xFF,0xFF,0xDF, 0xFF,0xFF,0xEF,0xEF,0xFD,0xFF,0x7F,0xFF, +0xFF,0xFF,0xFF,0xFE,0xA7,0xFF,0xFF,0xFF, 0x77,0xDF,0xF7,0xFD,0x9F,0x7F,0xFE,0x77, +0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xAF,0xBF,0xAF,0xFF,0xF9,0xBE,0xBF, +0x8F,0xFB,0xFE,0xFE,0xEF,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFF,0xFF,0xFD,0xDF,0x6F, +0xEF,0xFF,0x7F,0xFF,0xBF,0xBF,0xDF,0xFF, 0xFC,0xFF,0xDF,0xF7,0xFD,0xEF,0x7F,0xDF, +0xFF,0xFF,0xFF,0x3F,0xF6,0xFF,0xCF,0xFF, 0xDB,0xFB,0xF7,0xFF,0xEB,0x7A,0xFF,0xFF, +0xFF,0xBF,0xEF,0xFB,0xFF,0xFF,0xFF,0xFE, 0x6D,0xFD,0xFF,0x5F,0xFB,0xFF,0xFF,0xF7, +0xFF,0x5F,0xF5,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xF8,0xFF,0xFB,0xFF, +0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xE7,0xF6, 0xBF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xFF, +0xFF,0xC9,0xFF,0xFF,0xFF,0xBD,0xFF,0xBF, 0xAF,0xEF,0xEF,0x3F,0xD1,0xFC,0x7F,0xFB, +0xC7,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xFF, 0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0x77,0xFF, +0xDF,0xB7,0xFD,0xF7,0xFD,0xF7,0xFF,0xFF, 0xFF,0xFF,0xFF,0x57,0xFF,0xF7,0xA5,0xFD, +0x3F,0xDF,0xBF,0xBF,0xFE,0x7F,0xFF,0xFF, 0xFF,0xDF,0xFA,0xFD,0xFF,0xFF,0xFF,0xFE, +0x87,0xFF,0xE9,0xFF,0xFE,0xEF,0xBF,0xEF, 0xFE,0xFE,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFA,0x9F,0xFF,0x3F, 0xFF,0xFD,0xFD,0x57,0xDF,0xFD,0xF3,0xFF, +0xDF,0xFD,0xFF,0x5F,0xDF,0xF5,0xFD,0xFF, 0xFF,0xF9,0x8F,0xFF,0xFF,0xFF,0xEE,0x7F, +0xFF,0xFF,0xBF,0x5E,0xFE,0xEC,0xFB,0x3F, 0x7F,0x9F,0xEF,0xF9,0xFF,0xFF,0xCD,0x6B, +0xFF,0xFF,0xFF,0xC5,0xF3,0xFC,0xFA,0x38, 0xFF,0xAF,0x3F,0xEE,0x7F,0x9F,0xFF,0xD9, +0xFF,0xFF,0xFD,0x7A,0xF7,0xFF,0xF3,0xFF, 0xAF,0x6F,0xDB,0xF2,0xB9,0xE9,0xFB,0xFF, +0xFF,0xFF,0xFE,0xFF,0xFF,0xEF,0xFF,0xFB, 0xC5,0xBF,0xFF,0xEF,0xFF,0x5E,0xB7,0xAD, +0xCD,0x79,0x7C,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0x93,0xFF,0xEF, +0xEA,0xFE,0xBF,0xEF,0x5B,0xD2,0xCD,0xF5, 0x6D,0x77,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF, +0xFF,0xFF,0x66,0xFF,0xD5,0x65,0x7D,0x5F, 0x75,0x9D,0x65,0x7F,0xD6,0xFB,0x4F,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xC7, 0xFF,0xBF,0xEF,0xFA,0xFE,0xFF,0xBF,0xEB, +0xFF,0xDF,0xFF,0x7E,0xFF,0xFF,0xEF,0xFD, 0x7E,0xD7,0xFF,0x78,0xDF,0xFF,0x5F,0xDF, +0xF5,0xBF,0x7F,0xDF,0xC5,0xFF,0x3F,0xF6, 0x7E,0xFF,0x0F,0xEF,0xF2,0x3E,0xBF,0xFF, +0xFB,0x3F,0xFF,0xFB,0x7F,0xFF,0xB3,0xFE, 0xFB,0xF6,0xFD,0xFF,0xDA,0xF7,0xFD,0xFF, +0x7F,0xDF,0xF7,0xBF,0xFF,0xFA,0x7F,0xFF, 0xFF,0xFF,0xFF,0x9F,0xFF,0xF3,0xDC,0xF9, +0xBF,0xCE,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7, 0xFF,0xFF,0xE2,0x7F,0xFE,0xFF,0xBF,0xEF, +0xEB,0xFA,0xFF,0x9F,0x67,0x1E,0xFF,0x8F, 0xE7,0xF8,0xFE,0x7F,0x8F,0xEF,0xFF,0xBD, +0xBF,0xFF,0xFB,0xFF,0xFF,0xDF,0xF7,0xFF, 0xFC,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFD,0xB3,0xFF,0xFF,0xEF, 0xFF,0xFF,0xBF,0xED,0xFF,0xFB,0xEE,0xFE, +0xFF,0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFF,0xB5,0xFF,0xB7,0xFD,0xFD,0x6E,0xFF, +0xFF,0xFE,0xFD,0x2F,0xD8,0xFE,0xBF,0x8F, 0xEB,0xF9,0xFE,0x3F,0xFF,0xFA,0xCF,0xFF, +0xE7,0xD9,0xFA,0xBF,0xDF,0x77,0xFC,0xFB, 0x3F,0xAB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFE, +0xFF,0xFF,0xEE,0x1F,0xFF,0xDF,0xF7,0xFF, 0xFF,0xFF,0x5F,0x97,0x35,0xBF,0x5E,0xFE, +0xBF,0xEF,0xFF,0xF7,0xFD,0xFF,0xFF,0xFA, 0xBF,0xFF,0xBE,0x6F,0x9F,0xE7,0xF8,0xBE, +0x2F,0x8B,0x66,0x94,0x7D,0x9D,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF,0xFF, +0xFF,0xF7,0xF5,0xFD,0x7F,0x5F,0xFB,0xFD, 0x9E,0xFF,0xFB,0xFE,0xFF,0xFF,0xEF,0xFF, +0xFF,0xA0,0xFF,0xFF,0xFF,0xBF,0xEF,0xEB, 0xFA,0xFE,0xBF,0xB7,0xF7,0xF7,0xFF,0xFF, +0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xFD,0xFF,0xFF,0xFF,0xD7,0xFF,0xFF,0xFF, +0x7F,0xF5,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xFF,0xAB,0xFE,0xFB,0xFE,0xFF, +0xF7,0xAF,0xFF,0xFF,0xDE,0xF7,0xEB,0x5F, 0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF,0xFF, +0xB3,0xFF,0xC9,0xFE,0xFF,0xFF,0xFF,0xFF, 0xD6,0xFF,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFC,0x8F,0xFF,0xBA, 0xBE,0xBF,0xAF,0xEB,0x78,0xFE,0xB7,0xAD, +0x3A,0xFE,0xB7,0xAF,0xEB,0x7A,0xFE,0xBF, 0xAF,0xFF,0x9F,0xFF,0xFF,0xDF,0xFC,0xFF, +0xFF,0xFE,0xC3,0xFE,0xFF,0xFF,0x33,0xFC, 0xFF,0xBF,0xDF,0xF3,0xFF,0xFF,0xBB,0x9F, +0xFF,0xFF,0xFF,0xEB,0xDF,0xFF,0xFF,0xAF, 0xF7,0x6F,0xF9,0xBF,0xEF,0xFD,0xFF,0xFF, +0xFF,0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xFD,0xFB,0xF7,0xFF, +0xDF,0xF7,0xFF,0xFE,0xEF,0x5F,0xBD,0xFF, 0xFA,0xFF,0xF8,0xFF,0xBF,0xAF,0xFB,0xFE, +0xFE,0x3F,0xEF,0xE8,0xFF,0xDF,0xF3,0xFD, 0xFF,0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xFB, +0xFD,0xFF,0xAF,0xFF,0xFF,0xFE,0xFE,0xBF, 0xDB,0xFF,0xFF,0xFF,0xBF,0xFF,0xDF,0xFF, +0xFD,0xFF,0xCB,0xFF,0xFF,0xFF,0xFF,0xFF, 0xBF,0x6F,0xFF,0x7F,0xB7,0xB3,0xFF,0xFF, +0xDF,0xFF,0xFB,0xEF,0xFF,0xFF,0xFF,0x07, 0xFF,0xFB,0xFF,0xFF,0xFF,0xED,0xFF,0xF5, +0x7C,0xFF,0x7F,0xFE,0xFF,0xFF,0xEF,0xCF, 0xFF,0xFB,0xFF,0xFF,0x2F,0xFF,0xFF,0xFF, +0xFF,0xF3,0xFF,0xFB,0xFF,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, +0xFD,0x1B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFE,0x7C,0xFF,0xFF,0xFF,0xFF, +0xEF,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0x7F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xDB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xFE, +0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xEF,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xEF,0xFA,0xB5,0xFF,0xFF,0xFF, 0xF7,0xF7,0xFF,0xFF,0xFF,0xFF,0xDF,0xFB, +0xFC,0xFF,0xFF,0xFE,0xFF,0x7F,0xDF,0xBF, 0xFF,0xCB,0xBF,0xF9,0xFE,0x7F,0x9F,0xE7, +0xF9,0xFE,0x7F,0x97,0xE1,0xFE,0x79,0x9F, 0xE7,0xFD,0xFE,0x7F,0xDF,0xFE,0x37,0xFF, +0xFB,0xDE,0xDE,0xBD,0xEF,0xF3,0xFE,0xFB, 0xAF,0xEB,0xFE,0xFF,0xFF,0xCF,0xFF,0xFE, +0xFF,0xBF,0xFF,0x8F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xE7,0xF9,0x5E,0x7F,0xEF,0xFB, +0xDA,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD, 0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDF, +0xFF,0xFF,0x7F,0xFF,0xFF,0xF7,0xFB,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFC,0x3F,0xFF,0xBF, +0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0x7B,0x7F, 0xBF,0xEF,0xFB,0xFE,0xFF,0xB5,0xEF,0xFB, +0xBF,0xFA,0x7F,0xFC,0xFF,0x3F,0xCF,0xF3, 0xFC,0xFF,0x3F,0xCF,0xBC,0xFF,0x3F,0xEF, +0xF3,0xFC,0xFE,0x3F,0xCF,0xFF,0xEE,0xEF, 0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0x6A,0xD7, +0xB7,0xFB,0xF8,0xFF,0xB7,0xEF,0xBA,0xFE, 0xFF,0xBF,0x7F,0xE9,0xFF,0xF9,0x7E,0x5F, +0x97,0xE5,0xF9,0xFE,0x7F,0xBF,0xF9,0x7E, 0x5F,0x9F,0xE5,0xFB,0xFE,0x5F,0xB7,0xFF, +0xA3,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0x5E,0xF7,0x7D,0xFF,0x77,0xDF, +0xF7,0xFD,0xFF,0x7F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xDF,0xFB,0x7F, +0xFF,0xFF,0xEF,0xFF,0xFE,0xFB,0xFF,0xFF, 0xBF,0xFE,0x8F,0xFF,0xDF,0xF7,0xFD,0xFD, +0x7F,0xDF,0xF7,0xFD,0x3E,0xDF,0xF5,0xBD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xF7,0xFF,0x9F, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xBE,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFD,0x3F,0xFF,0xDF,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xCF, +0x77,0xFC,0xFF,0x5F,0xDF,0xF7,0xFD,0xFF, 0xF4,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xFF,0xFF,0xEE,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xED,0xFB,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xE9,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFB,0xFF,0xFF,0xFF,0xD3,0xFF,0xFF, +0xBF,0x3F,0xFB,0xFF,0xFF,0xFF,0xFB,0xF3, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0x17,0xFF,0xFF,0xFF, +0xDF,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xDF,0xFF,0xFD,0xFF,0xFF,0xDF,0xF7, +0xFF,0x4F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD, +0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x9F,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFF,0xFF,0x7A,0x3F,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF2, +0x7F,0xFF,0xFB,0xFE,0xFF,0xBF,0xEF,0xF8, 0xFE,0xFF,0xBF,0xFB,0xFE,0xFF,0x8F,0xEC, +0xFB,0xFE,0xFF,0xBF,0xF8,0xF7,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFD,0xBF,0xCF,0xEC, +0xFF,0x3F,0xEF,0xDB,0xF8,0xFF,0xBF,0xCF, 0xFF,0xF9,0xFF,0xFF,0xBF,0xFF,0xFB,0xFF, +0xFF,0xFF,0xEF,0xFB,0xDF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xBB,0xFF, +0xEF,0xFB,0xFE,0xEF,0xBF,0xEE,0xEB,0xFB, 0xFE,0xFF,0xEF,0xFE,0xEE,0xBF,0xFE,0xEB, +0xFF,0xEF,0xFF,0x17,0xFF,0x7E,0xEB,0xBB, 0xFE,0xBF,0xBE,0xFB,0xEF,0x5B,0xF7,0xBD, +0xFB,0xCF,0xBF,0xBF,0xBB,0xFB,0x7E,0xCC, 0xEF,0xFF + +}; diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c new file mode 100644 index 00000000000..1774ab7a40d --- /dev/null +++ b/drivers/media/video/dabusb.c @@ -0,0 +1,874 @@ +/*****************************************************************************/ + +/* + * dabusb.c -- dab usb driver. + * + * Copyright (C) 1999 Deti Fliegl (deti@fliegl.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * + * $Id: dabusb.c,v 1.54 2000/07/24 21:39:39 deti Exp $ + * + */ + +/*****************************************************************************/ + +#include <linux/module.h> +#include <linux/socket.h> +#include <linux/list.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <asm/atomic.h> +#include <linux/delay.h> +#include <linux/usb.h> +#include <linux/smp_lock.h> +#include <linux/mutex.h> + +#include "dabusb.h" +#include "dabfirmware.h" + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.54" +#define DRIVER_AUTHOR "Deti Fliegl, deti@fliegl.de" +#define DRIVER_DESC "DAB-USB Interface Driver for Linux (c)1999" + +/* --------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define NRDABUSB 256 +#else +#define NRDABUSB 4 +#endif + +/*-------------------------------------------------------------------*/ + +static dabusb_t dabusb[NRDABUSB]; +static int buffers = 256; +static struct usb_driver dabusb_driver; + +/*-------------------------------------------------------------------*/ + +static int dabusb_add_buf_tail (pdabusb_t s, struct list_head *dst, struct list_head *src) +{ + unsigned long flags; + struct list_head *tmp; + int ret = 0; + + spin_lock_irqsave (&s->lock, flags); + + if (list_empty (src)) { + // no elements in source buffer + ret = -1; + goto err; + } + tmp = src->next; + list_move_tail (tmp, dst); + + err: spin_unlock_irqrestore (&s->lock, flags); + return ret; +} +/*-------------------------------------------------------------------*/ +#ifdef DEBUG +static void dump_urb (struct urb *urb) +{ + dbg("urb :%p", urb); + dbg("dev :%p", urb->dev); + dbg("pipe :%08X", urb->pipe); + dbg("status :%d", urb->status); + dbg("transfer_flags :%08X", urb->transfer_flags); + dbg("transfer_buffer :%p", urb->transfer_buffer); + dbg("transfer_buffer_length:%d", urb->transfer_buffer_length); + dbg("actual_length :%d", urb->actual_length); + dbg("setup_packet :%p", urb->setup_packet); + dbg("start_frame :%d", urb->start_frame); + dbg("number_of_packets :%d", urb->number_of_packets); + dbg("interval :%d", urb->interval); + dbg("error_count :%d", urb->error_count); + dbg("context :%p", urb->context); + dbg("complete :%p", urb->complete); +} +#endif +/*-------------------------------------------------------------------*/ +static int dabusb_cancel_queue (pdabusb_t s, struct list_head *q) +{ + unsigned long flags; + pbuff_t b; + + dbg("dabusb_cancel_queue"); + + spin_lock_irqsave (&s->lock, flags); + + list_for_each_entry(b, q, buff_list) { +#ifdef DEBUG + dump_urb(b->purb); +#endif + usb_unlink_urb (b->purb); + } + spin_unlock_irqrestore (&s->lock, flags); + return 0; +} +/*-------------------------------------------------------------------*/ +static int dabusb_free_queue (struct list_head *q) +{ + struct list_head *tmp; + struct list_head *p; + pbuff_t b; + + dbg("dabusb_free_queue"); + for (p = q->next; p != q;) { + b = list_entry (p, buff_t, buff_list); + +#ifdef DEBUG + dump_urb(b->purb); +#endif + kfree(b->purb->transfer_buffer); + usb_free_urb(b->purb); + tmp = p->next; + list_del (p); + kfree (b); + p = tmp; + } + + return 0; +} +/*-------------------------------------------------------------------*/ +static int dabusb_free_buffers (pdabusb_t s) +{ + unsigned long flags; + dbg("dabusb_free_buffers"); + + spin_lock_irqsave(&s->lock, flags); + + dabusb_free_queue (&s->free_buff_list); + dabusb_free_queue (&s->rec_buff_list); + + spin_unlock_irqrestore(&s->lock, flags); + + s->got_mem = 0; + return 0; +} +/*-------------------------------------------------------------------*/ +static void dabusb_iso_complete (struct urb *purb, struct pt_regs *regs) +{ + pbuff_t b = purb->context; + pdabusb_t s = b->s; + int i; + int len; + int dst = 0; + void *buf = purb->transfer_buffer; + + dbg("dabusb_iso_complete"); + + // process if URB was not killed + if (purb->status != -ENOENT) { + unsigned int pipe = usb_rcvisocpipe (purb->dev, _DABUSB_ISOPIPE); + int pipesize = usb_maxpacket (purb->dev, pipe, usb_pipeout (pipe)); + for (i = 0; i < purb->number_of_packets; i++) + if (!purb->iso_frame_desc[i].status) { + len = purb->iso_frame_desc[i].actual_length; + if (len <= pipesize) { + memcpy (buf + dst, buf + purb->iso_frame_desc[i].offset, len); + dst += len; + } + else + err("dabusb_iso_complete: invalid len %d", len); + } + else + warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status); + if (dst != purb->actual_length) + err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length); + } + + if (atomic_dec_and_test (&s->pending_io) && !s->remove_pending && s->state != _stopped) { + s->overruns++; + err("overrun (%d)", s->overruns); + } + wake_up (&s->wait); +} +/*-------------------------------------------------------------------*/ +static int dabusb_alloc_buffers (pdabusb_t s) +{ + int buffers = 0; + pbuff_t b; + unsigned int pipe = usb_rcvisocpipe (s->usbdev, _DABUSB_ISOPIPE); + int pipesize = usb_maxpacket (s->usbdev, pipe, usb_pipeout (pipe)); + int packets = _ISOPIPESIZE / pipesize; + int transfer_buffer_length = packets * pipesize; + int i; + + dbg("dabusb_alloc_buffers pipesize:%d packets:%d transfer_buffer_len:%d", + pipesize, packets, transfer_buffer_length); + + while (buffers < (s->total_buffer_size << 10)) { + b = (pbuff_t) kzalloc (sizeof (buff_t), GFP_KERNEL); + if (!b) { + err("kzalloc(sizeof(buff_t))==NULL"); + goto err; + } + b->s = s; + b->purb = usb_alloc_urb(packets, GFP_KERNEL); + if (!b->purb) { + err("usb_alloc_urb == NULL"); + kfree (b); + goto err; + } + + b->purb->transfer_buffer = kmalloc (transfer_buffer_length, GFP_KERNEL); + if (!b->purb->transfer_buffer) { + kfree (b->purb); + kfree (b); + err("kmalloc(%d)==NULL", transfer_buffer_length); + goto err; + } + + b->purb->transfer_buffer_length = transfer_buffer_length; + b->purb->number_of_packets = packets; + b->purb->complete = dabusb_iso_complete; + b->purb->context = b; + b->purb->dev = s->usbdev; + b->purb->pipe = pipe; + b->purb->transfer_flags = URB_ISO_ASAP; + + for (i = 0; i < packets; i++) { + b->purb->iso_frame_desc[i].offset = i * pipesize; + b->purb->iso_frame_desc[i].length = pipesize; + } + + buffers += transfer_buffer_length; + list_add_tail (&b->buff_list, &s->free_buff_list); + } + s->got_mem = buffers; + + return 0; + + err: + dabusb_free_buffers (s); + return -ENOMEM; +} +/*-------------------------------------------------------------------*/ +static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb) +{ + int ret; + unsigned int pipe; + int actual_length; + + dbg("dabusb_bulk"); + + if (!pb->pipe) + pipe = usb_rcvbulkpipe (s->usbdev, 2); + else + pipe = usb_sndbulkpipe (s->usbdev, 2); + + ret=usb_bulk_msg(s->usbdev, pipe, pb->data, pb->size, &actual_length, 100); + if(ret<0) { + err("dabusb: usb_bulk_msg failed(%d)",ret); + + if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { + err("set_interface failed"); + return -EINVAL; + } + + } + + if( ret == -EPIPE ) { + warn("CLEAR_FEATURE request to remove STALL condition."); + if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe))) + err("request failed"); + } + + pb->size = actual_length; + return ret; +} +/* --------------------------------------------------------------------- */ +static int dabusb_writemem (pdabusb_t s, int pos, unsigned char *data, int len) +{ + int ret; + unsigned char *transfer_buffer = kmalloc (len, GFP_KERNEL); + + if (!transfer_buffer) { + err("dabusb_writemem: kmalloc(%d) failed.", len); + return -ENOMEM; + } + + memcpy (transfer_buffer, data, len); + + ret=usb_control_msg(s->usbdev, usb_sndctrlpipe( s->usbdev, 0 ), 0xa0, 0x40, pos, 0, transfer_buffer, len, 300); + + kfree (transfer_buffer); + return ret; +} +/* --------------------------------------------------------------------- */ +static int dabusb_8051_reset (pdabusb_t s, unsigned char reset_bit) +{ + dbg("dabusb_8051_reset: %d",reset_bit); + return dabusb_writemem (s, CPUCS_REG, &reset_bit, 1); +} +/* --------------------------------------------------------------------- */ +static int dabusb_loadmem (pdabusb_t s, const char *fname) +{ + int ret; + PINTEL_HEX_RECORD ptr = firmware; + + dbg("Enter dabusb_loadmem (internal)"); + + ret = dabusb_8051_reset (s, 1); + while (ptr->Type == 0) { + + dbg("dabusb_writemem: %04X %p %d)", ptr->Address, ptr->Data, ptr->Length); + + ret = dabusb_writemem (s, ptr->Address, ptr->Data, ptr->Length); + if (ret < 0) { + err("dabusb_writemem failed (%d %04X %p %d)", ret, ptr->Address, ptr->Data, ptr->Length); + break; + } + ptr++; + } + ret = dabusb_8051_reset (s, 0); + + dbg("dabusb_loadmem: exit"); + + return ret; +} +/* --------------------------------------------------------------------- */ +static int dabusb_fpga_clear (pdabusb_t s, pbulk_transfer_t b) +{ + b->size = 4; + b->data[0] = 0x2a; + b->data[1] = 0; + b->data[2] = 0; + b->data[3] = 0; + + dbg("dabusb_fpga_clear"); + + return dabusb_bulk (s, b); +} +/* --------------------------------------------------------------------- */ +static int dabusb_fpga_init (pdabusb_t s, pbulk_transfer_t b) +{ + b->size = 4; + b->data[0] = 0x2c; + b->data[1] = 0; + b->data[2] = 0; + b->data[3] = 0; + + dbg("dabusb_fpga_init"); + + return dabusb_bulk (s, b); +} +/* --------------------------------------------------------------------- */ +static int dabusb_fpga_download (pdabusb_t s, const char *fname) +{ + pbulk_transfer_t b = kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL); + unsigned int blen, n; + int ret; + unsigned char *buf = bitstream; + + dbg("Enter dabusb_fpga_download (internal)"); + + if (!b) { + err("kmalloc(sizeof(bulk_transfer_t))==NULL"); + return -ENOMEM; + } + + b->pipe = 1; + ret = dabusb_fpga_clear (s, b); + mdelay (10); + blen = buf[73] + (buf[72] << 8); + + dbg("Bitstream len: %i", blen); + + b->data[0] = 0x2b; + b->data[1] = 0; + b->data[2] = 0; + b->data[3] = 60; + + for (n = 0; n <= blen + 60; n += 60) { + // some cclks for startup + b->size = 64; + memcpy (b->data + 4, buf + 74 + n, 60); + ret = dabusb_bulk (s, b); + if (ret < 0) { + err("dabusb_bulk failed."); + break; + } + mdelay (1); + } + + ret = dabusb_fpga_init (s, b); + kfree (b); + + dbg("exit dabusb_fpga_download"); + + return ret; +} + +static int dabusb_stop (pdabusb_t s) +{ + dbg("dabusb_stop"); + + s->state = _stopped; + dabusb_cancel_queue (s, &s->rec_buff_list); + + dbg("pending_io: %d", s->pending_io.counter); + + s->pending_io.counter = 0; + return 0; +} + +static int dabusb_startrek (pdabusb_t s) +{ + if (!s->got_mem && s->state != _started) { + + dbg("dabusb_startrek"); + + if (dabusb_alloc_buffers (s) < 0) + return -ENOMEM; + dabusb_stop (s); + s->state = _started; + s->readptr = 0; + } + + if (!list_empty (&s->free_buff_list)) { + pbuff_t end; + int ret; + + while (!dabusb_add_buf_tail (s, &s->rec_buff_list, &s->free_buff_list)) { + + dbg("submitting: end:%p s->rec_buff_list:%p", s->rec_buff_list.prev, &s->rec_buff_list); + + end = list_entry (s->rec_buff_list.prev, buff_t, buff_list); + + ret = usb_submit_urb (end->purb, GFP_KERNEL); + if (ret) { + err("usb_submit_urb returned:%d", ret); + if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list)) + err("startrek: dabusb_add_buf_tail failed"); + break; + } + else + atomic_inc (&s->pending_io); + } + dbg("pending_io: %d",s->pending_io.counter); + } + + return 0; +} + +static ssize_t dabusb_read (struct file *file, char __user *buf, size_t count, loff_t * ppos) +{ + pdabusb_t s = (pdabusb_t) file->private_data; + unsigned long flags; + unsigned ret = 0; + int rem; + int cnt; + pbuff_t b; + struct urb *purb = NULL; + + dbg("dabusb_read"); + + if (*ppos) + return -ESPIPE; + + if (s->remove_pending) + return -EIO; + + + if (!s->usbdev) + return -EIO; + + while (count > 0) { + dabusb_startrek (s); + + spin_lock_irqsave (&s->lock, flags); + + if (list_empty (&s->rec_buff_list)) { + + spin_unlock_irqrestore(&s->lock, flags); + + err("error: rec_buf_list is empty"); + goto err; + } + + b = list_entry (s->rec_buff_list.next, buff_t, buff_list); + purb = b->purb; + + spin_unlock_irqrestore(&s->lock, flags); + + if (purb->status == -EINPROGRESS) { + if (file->f_flags & O_NONBLOCK) // return nonblocking + { + if (!ret) + ret = -EAGAIN; + goto err; + } + + interruptible_sleep_on (&s->wait); + + if (signal_pending (current)) { + if (!ret) + ret = -ERESTARTSYS; + goto err; + } + + spin_lock_irqsave (&s->lock, flags); + + if (list_empty (&s->rec_buff_list)) { + spin_unlock_irqrestore(&s->lock, flags); + err("error: still no buffer available."); + goto err; + } + spin_unlock_irqrestore(&s->lock, flags); + s->readptr = 0; + } + if (s->remove_pending) { + ret = -EIO; + goto err; + } + + rem = purb->actual_length - s->readptr; // set remaining bytes to copy + + if (count >= rem) + cnt = rem; + else + cnt = count; + + dbg("copy_to_user:%p %p %d",buf, purb->transfer_buffer + s->readptr, cnt); + + if (copy_to_user (buf, purb->transfer_buffer + s->readptr, cnt)) { + err("read: copy_to_user failed"); + if (!ret) + ret = -EFAULT; + goto err; + } + + s->readptr += cnt; + count -= cnt; + buf += cnt; + ret += cnt; + + if (s->readptr == purb->actual_length) { + // finished, take next buffer + if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list)) + err("read: dabusb_add_buf_tail failed"); + s->readptr = 0; + } + } + err: //mutex_unlock(&s->mutex); + return ret; +} + +static int dabusb_open (struct inode *inode, struct file *file) +{ + int devnum = iminor(inode); + pdabusb_t s; + + if (devnum < DABUSB_MINOR || devnum >= (DABUSB_MINOR + NRDABUSB)) + return -EIO; + + s = &dabusb[devnum - DABUSB_MINOR]; + + dbg("dabusb_open"); + mutex_lock(&s->mutex); + + while (!s->usbdev || s->opened) { + mutex_unlock(&s->mutex); + + if (file->f_flags & O_NONBLOCK) { + return -EBUSY; + } + msleep_interruptible(500); + + if (signal_pending (current)) { + return -EAGAIN; + } + mutex_lock(&s->mutex); + } + if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { + mutex_unlock(&s->mutex); + err("set_interface failed"); + return -EINVAL; + } + s->opened = 1; + mutex_unlock(&s->mutex); + + file->f_pos = 0; + file->private_data = s; + + return nonseekable_open(inode, file); +} + +static int dabusb_release (struct inode *inode, struct file *file) +{ + pdabusb_t s = (pdabusb_t) file->private_data; + + dbg("dabusb_release"); + + mutex_lock(&s->mutex); + dabusb_stop (s); + dabusb_free_buffers (s); + mutex_unlock(&s->mutex); + + if (!s->remove_pending) { + if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) + err("set_interface failed"); + } + else + wake_up (&s->remove_ok); + + s->opened = 0; + return 0; +} + +static int dabusb_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + pdabusb_t s = (pdabusb_t) file->private_data; + pbulk_transfer_t pbulk; + int ret = 0; + int version = DABUSB_VERSION; + + dbg("dabusb_ioctl"); + + if (s->remove_pending) + return -EIO; + + mutex_lock(&s->mutex); + + if (!s->usbdev) { + mutex_unlock(&s->mutex); + return -EIO; + } + + switch (cmd) { + + case IOCTL_DAB_BULK: + pbulk = (pbulk_transfer_t) kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL); + + if (!pbulk) { + ret = -ENOMEM; + break; + } + + if (copy_from_user (pbulk, (void __user *) arg, sizeof (bulk_transfer_t))) { + ret = -EFAULT; + kfree (pbulk); + break; + } + + ret=dabusb_bulk (s, pbulk); + if(ret==0) + if (copy_to_user((void __user *)arg, pbulk, + sizeof(bulk_transfer_t))) + ret = -EFAULT; + kfree (pbulk); + break; + + case IOCTL_DAB_OVERRUNS: + ret = put_user (s->overruns, (unsigned int __user *) arg); + break; + + case IOCTL_DAB_VERSION: + ret = put_user (version, (unsigned int __user *) arg); + break; + + default: + ret = -ENOIOCTLCMD; + break; + } + mutex_unlock(&s->mutex); + return ret; +} + +static struct file_operations dabusb_fops = +{ + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = dabusb_read, + .ioctl = dabusb_ioctl, + .open = dabusb_open, + .release = dabusb_release, +}; + +static struct usb_class_driver dabusb_class = { + .name = "dabusb%d", + .fops = &dabusb_fops, + .minor_base = DABUSB_MINOR, +}; + + +/* --------------------------------------------------------------------- */ +static int dabusb_probe (struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(intf); + int retval; + pdabusb_t s; + + dbg("dabusb: probe: vendor id 0x%x, device id 0x%x ifnum:%d", + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct), + intf->altsetting->desc.bInterfaceNumber); + + /* We don't handle multiple configurations */ + if (usbdev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + if (intf->altsetting->desc.bInterfaceNumber != _DABUSB_IF && + le16_to_cpu(usbdev->descriptor.idProduct) == 0x9999) + return -ENODEV; + + + + s = &dabusb[intf->minor]; + + mutex_lock(&s->mutex); + s->remove_pending = 0; + s->usbdev = usbdev; + s->devnum = intf->minor; + + if (usb_reset_configuration (usbdev) < 0) { + err("reset_configuration failed"); + goto reject; + } + if (le16_to_cpu(usbdev->descriptor.idProduct) == 0x2131) { + dabusb_loadmem (s, NULL); + goto reject; + } + else { + dabusb_fpga_download (s, NULL); + + if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) { + err("set_interface failed"); + goto reject; + } + } + dbg("bound to interface: %d", intf->altsetting->desc.bInterfaceNumber); + usb_set_intfdata (intf, s); + mutex_unlock(&s->mutex); + + retval = usb_register_dev(intf, &dabusb_class); + if (retval) { + usb_set_intfdata (intf, NULL); + return -ENOMEM; + } + + return 0; + + reject: + mutex_unlock(&s->mutex); + s->usbdev = NULL; + return -ENODEV; +} + +static void dabusb_disconnect (struct usb_interface *intf) +{ + wait_queue_t __wait; + pdabusb_t s = usb_get_intfdata (intf); + + dbg("dabusb_disconnect"); + + init_waitqueue_entry(&__wait, current); + + usb_set_intfdata (intf, NULL); + if (s) { + usb_deregister_dev (intf, &dabusb_class); + s->remove_pending = 1; + wake_up (&s->wait); + add_wait_queue(&s->remove_ok, &__wait); + set_current_state(TASK_UNINTERRUPTIBLE); + if (s->state == _started) + schedule(); + current->state = TASK_RUNNING; + remove_wait_queue(&s->remove_ok, &__wait); + + s->usbdev = NULL; + s->overruns = 0; + } +} + +static struct usb_device_id dabusb_ids [] = { + // { USB_DEVICE(0x0547, 0x2131) }, /* An2131 chip, no boot ROM */ + { USB_DEVICE(0x0547, 0x9999) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, dabusb_ids); + +static struct usb_driver dabusb_driver = { + .name = "dabusb", + .probe = dabusb_probe, + .disconnect = dabusb_disconnect, + .id_table = dabusb_ids, +}; + +/* --------------------------------------------------------------------- */ + +static int __init dabusb_init (void) +{ + int retval; + unsigned u; + + /* initialize struct */ + for (u = 0; u < NRDABUSB; u++) { + pdabusb_t s = &dabusb[u]; + memset (s, 0, sizeof (dabusb_t)); + mutex_init (&s->mutex); + s->usbdev = NULL; + s->total_buffer_size = buffers; + init_waitqueue_head (&s->wait); + init_waitqueue_head (&s->remove_ok); + spin_lock_init (&s->lock); + INIT_LIST_HEAD (&s->free_buff_list); + INIT_LIST_HEAD (&s->rec_buff_list); + } + + /* register misc device */ + retval = usb_register(&dabusb_driver); + if (retval) + goto out; + + dbg("dabusb_init: driver registered"); + + info(DRIVER_VERSION ":" DRIVER_DESC); + +out: + return retval; +} + +static void __exit dabusb_cleanup (void) +{ + dbg("dabusb_cleanup"); + + usb_deregister (&dabusb_driver); +} + +/* --------------------------------------------------------------------- */ + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); + +module_param(buffers, int, 0); +MODULE_PARM_DESC (buffers, "Number of buffers (default=256)"); + +module_init (dabusb_init); +module_exit (dabusb_cleanup); + +/* --------------------------------------------------------------------- */ diff --git a/drivers/media/video/dabusb.h b/drivers/media/video/dabusb.h new file mode 100644 index 00000000000..96b03e4af8b --- /dev/null +++ b/drivers/media/video/dabusb.h @@ -0,0 +1,85 @@ +#define _BULK_DATA_LEN 64 +typedef struct +{ + unsigned char data[_BULK_DATA_LEN]; + unsigned int size; + unsigned int pipe; +}bulk_transfer_t,*pbulk_transfer_t; + +#define DABUSB_MINOR 240 /* some unassigned USB minor */ +#define DABUSB_VERSION 0x1000 +#define IOCTL_DAB_BULK _IOWR('d', 0x30, bulk_transfer_t) +#define IOCTL_DAB_OVERRUNS _IOR('d', 0x15, int) +#define IOCTL_DAB_VERSION _IOR('d', 0x3f, int) + +#ifdef __KERNEL__ + +typedef enum { _stopped=0, _started } driver_state_t; + +typedef struct +{ + struct mutex mutex; + struct usb_device *usbdev; + wait_queue_head_t wait; + wait_queue_head_t remove_ok; + spinlock_t lock; + atomic_t pending_io; + driver_state_t state; + int remove_pending; + int got_mem; + int total_buffer_size; + unsigned int overruns; + int readptr; + int opened; + int devnum; + struct list_head free_buff_list; + struct list_head rec_buff_list; +} dabusb_t,*pdabusb_t; + +typedef struct +{ + pdabusb_t s; + struct urb *purb; + struct list_head buff_list; +} buff_t,*pbuff_t; + +typedef struct +{ + wait_queue_head_t wait; +} bulk_completion_context_t, *pbulk_completion_context_t; + + +#define _DABUSB_IF 2 +#define _DABUSB_ISOPIPE 0x09 +#define _ISOPIPESIZE 16384 + +#define _BULK_DATA_LEN 64 +// Vendor specific request code for Anchor Upload/Download +// This one is implemented in the core +#define ANCHOR_LOAD_INTERNAL 0xA0 + +// EZ-USB Control and Status Register. Bit 0 controls 8051 reset +#define CPUCS_REG 0x7F92 +#define _TOTAL_BUFFERS 384 + +#define MAX_INTEL_HEX_RECORD_LENGTH 16 + +#ifndef _BYTE_DEFINED +#define _BYTE_DEFINED +typedef unsigned char BYTE; +#endif // !_BYTE_DEFINED + +#ifndef _WORD_DEFINED +#define _WORD_DEFINED +typedef unsigned short WORD; +#endif // !_WORD_DEFINED + +typedef struct _INTEL_HEX_RECORD +{ + BYTE Length; + WORD Address; + BYTE Type; + BYTE Data[MAX_INTEL_HEX_RECORD_LENGTH]; +} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD; + +#endif diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c new file mode 100644 index 00000000000..25646804d5b --- /dev/null +++ b/drivers/media/video/dsbr100.c @@ -0,0 +1,429 @@ +/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs + into both the USB and an analog audio input, so this thing + only deals with initialisation and frequency setting, the + audio data has to be handled by a sound driver. + + Major issue: I can't find out where the device reports the signal + strength, and indeed the windows software appearantly just looks + at the stereo indicator as well. So, scanning will only find + stereo stations. Sad, but I can't help it. + + Also, the windows program sends oodles of messages over to the + device, and I couldn't figure out their meaning. My suspicion + is that they don't have any:-) + + You might find some interesting stuff about this module at + http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr + + Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + History: + + Version 0.40: + Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing + + Version 0.30: + Markus: Updates for 2.5.x kernel and more ISO compliant source + + Version 0.25: + PSL and Markus: Cleanup, radio now doesn't stop on device close + + Version 0.24: + Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally + right. Some minor cleanup, improved standalone compilation + + Version 0.23: + Markus: Sign extension bug fixed by declaring transfer_buffer unsigned + + Version 0.22: + Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, + thanks to Mike Cox for pointing the problem out. + + Version 0.21: + Markus: Minor cleanup, warnings if something goes wrong, lame attempt + to adhere to Documentation/CodingStyle + + Version 0.2: + Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module + Markus: Copyright clarification + + Version 0.01: Markus: initial release + +*/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/smp_lock.h> + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.40" +#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>" +#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" + +#define DSB100_VENDOR 0x04b4 +#define DSB100_PRODUCT 0x1002 + +/* Commands the device appears to understand */ +#define DSB100_TUNE 1 +#define DSB100_ONOFF 2 + +#define TB_LEN 16 + +/* Frequency limits in MHz -- these are European values. For Japanese +devices, that would be 76 and 91. */ +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + + +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void usb_dsbr100_disconnect(struct usb_interface *intf); +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static int usb_dsbr100_open(struct inode *inode, struct file *file); +static int usb_dsbr100_close(struct inode *inode, struct file *file); + +static int radio_nr = -1; +module_param(radio_nr, int, 0); + +/* Data for one (physical) device */ +typedef struct { + struct usb_device *usbdev; + struct video_device *videodev; + unsigned char transfer_buffer[TB_LEN]; + int curfreq; + int stereo; + int users; + int removed; +} dsbr100_device; + + +/* File system interface */ +static struct file_operations usb_dsbr100_fops = { + .owner = THIS_MODULE, + .open = usb_dsbr100_open, + .release = usb_dsbr100_close, + .ioctl = usb_dsbr100_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +/* V4L interface */ +static struct video_device dsbr100_videodev_template= +{ + .owner = THIS_MODULE, + .name = "D-Link DSB-R 100", + .type = VID_TYPE_TUNER, + .hardware = VID_HARDWARE_AZTECH, + .fops = &usb_dsbr100_fops, + .release = video_device_release, +}; + +static struct usb_device_id usb_dsbr100_device_table [] = { + { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_dsbr100_driver = { + .name = "dsbr100", + .probe = usb_dsbr100_probe, + .disconnect = usb_dsbr100_disconnect, + .id_table = usb_dsbr100_device_table, +}; + +/* Low-level device interface begins here */ + +/* switch on radio */ +static int dsbr100_start(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + + +/* switch off radio */ +static int dsbr100_stop(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int dsbr100_setfreq(dsbr100_device *radio, int freq) +{ + freq = (freq/16*80)/1000+856; + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_TUNE, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + (freq>>8)&0x00ff, freq&0xff, + radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { + radio->stereo = -1; + return -1; + } + radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); + return (radio->transfer_buffer)[0]; +} + +/* return the device status. This is, in effect, just whether it +sees a stereo signal or not. Pity. */ +static void dsbr100_getstat(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) + radio->stereo = -1; + else + radio->stereo = ! (radio->transfer_buffer[0]&0x01); +} + + +/* USB subsystem interface begins here */ + +/* check if the device is present and register with v4l and +usb if it is */ +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + dsbr100_device *radio; + + if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) + return -ENOMEM; + if (!(radio->videodev = video_device_alloc())) { + kfree(radio); + return -ENOMEM; + } + memcpy(radio->videodev, &dsbr100_videodev_template, + sizeof(dsbr100_videodev_template)); + radio->removed = 0; + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + radio->curfreq = FREQ_MIN*FREQ_MUL; + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, + radio_nr)) { + warn("Could not register video device"); + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + usb_set_intfdata(intf, radio); + return 0; +} + +/* handle unplugging of the device, release data structures +if nothing keeps us from doing it. If something is still +keeping us busy, the release callback of v4l will take care +of releasing it. stv680.c does not relase its private +data, so I don't do this here either. Checking out the +code I'd expect I better did that, but if there's a memory +leak here it's tiny (~50 bytes per disconnect) */ +static void usb_dsbr100_disconnect(struct usb_interface *intf) +{ + dsbr100_device *radio = usb_get_intfdata(intf); + + usb_set_intfdata (intf, NULL); + if (radio) { + video_unregister_device(radio->videodev); + radio->videodev = NULL; + if (radio->users) { + kfree(radio); + } else { + radio->removed = 1; + } + } +} + + +/* Video for Linux interface */ + +static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -EIO; + + switch(cmd) { + case VIDIOCGCAP: { + struct video_capability *v = arg; + + memset(v, 0, sizeof(*v)); + v->type = VID_TYPE_TUNER; + v->channels = 1; + v->audios = 1; + strcpy(v->name, "D-Link R-100 USB FM Radio"); + return 0; + } + case VIDIOCGTUNER: { + struct video_tuner *v = arg; + + dsbr100_getstat(radio); + if(v->tuner) /* Only 1 tuner */ + return -EINVAL; + v->rangelow = FREQ_MIN*FREQ_MUL; + v->rangehigh = FREQ_MAX*FREQ_MUL; + v->flags = VIDEO_TUNER_LOW; + v->mode = VIDEO_MODE_AUTO; + v->signal = radio->stereo*0x7000; + /* Don't know how to get signal strength */ + v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; + strcpy(v->name, "DSB R-100"); + return 0; + } + case VIDIOCSTUNER: { + struct video_tuner *v = arg; + + if(v->tuner!=0) + return -EINVAL; + /* Only 1 tuner so no setting needed ! */ + return 0; + } + case VIDIOCGFREQ: { + int *freq = arg; + + if (radio->curfreq==-1) + return -EINVAL; + *freq = radio->curfreq; + return 0; + } + case VIDIOCSFREQ: { + int *freq = arg; + + radio->curfreq = *freq; + if (dsbr100_setfreq(radio, radio->curfreq)==-1) + warn("Set frequency failed"); + return 0; + } + case VIDIOCGAUDIO: { + struct video_audio *v = arg; + + memset(v, 0, sizeof(*v)); + v->flags |= VIDEO_AUDIO_MUTABLE; + v->mode = VIDEO_SOUND_STEREO; + v->volume = 1; + v->step = 1; + strcpy(v->name, "Radio"); + return 0; + } + case VIDIOCSAUDIO: { + struct video_audio *v = arg; + + if (v->audio) + return -EINVAL; + if (v->flags&VIDEO_AUDIO_MUTE) { + if (dsbr100_stop(radio)==-1) + warn("Radio did not respond properly"); + } + else + if (dsbr100_start(radio)==-1) + warn("Radio did not respond properly"); + return 0; + } + default: + return -ENOIOCTLCMD; + } +} + +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); +} + +static int usb_dsbr100_open(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + radio->users = 1; + if (dsbr100_start(radio)<0) { + warn("Radio did not start up properly"); + radio->users = 0; + return -EIO; + } + dsbr100_setfreq(radio, radio->curfreq); + return 0; +} + +static int usb_dsbr100_close(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + radio->users = 0; + if (radio->removed) { + kfree(radio); + } + return 0; +} + +static int __init dsbr100_init(void) +{ + int retval = usb_register(&usb_dsbr100_driver); + info(DRIVER_VERSION ":" DRIVER_DESC); + return retval; +} + +static void __exit dsbr100_exit(void) +{ + usb_deregister(&usb_dsbr100_driver); +} + +module_init (dsbr100_init); +module_exit (dsbr100_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/et61x251/Makefile b/drivers/media/video/et61x251/Makefile new file mode 100644 index 00000000000..2ff4db9ec88 --- /dev/null +++ b/drivers/media/video/et61x251/Makefile @@ -0,0 +1,4 @@ +et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o + +obj-$(CONFIG_USB_ET61X251) += et61x251.o + diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h new file mode 100644 index 00000000000..eee8afc9be7 --- /dev/null +++ b/drivers/media/video/et61x251/et61x251.h @@ -0,0 +1,234 @@ +/*************************************************************************** + * V4L2 driver for ET61X[12]51 PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ET61X251_H_ +#define _ET61X251_H_ + +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <linux/param.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> +#include <linux/stddef.h> +#include <linux/string.h> + +#include "et61x251_sensor.h" + +/*****************************************************************************/ + +#define ET61X251_DEBUG +#define ET61X251_DEBUG_LEVEL 2 +#define ET61X251_MAX_DEVICES 64 +#define ET61X251_PRESERVE_IMGSCALE 0 +#define ET61X251_FORCE_MUNMAP 0 +#define ET61X251_MAX_FRAMES 32 +#define ET61X251_COMPRESSION_QUALITY 0 +#define ET61X251_URBS 2 +#define ET61X251_ISO_PACKETS 7 +#define ET61X251_ALTERNATE_SETTING 13 +#define ET61X251_URB_TIMEOUT msecs_to_jiffies(2 * ET61X251_ISO_PACKETS) +#define ET61X251_CTRL_TIMEOUT 100 +#define ET61X251_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +static const struct usb_device_id et61x251_id_table[] = { + { USB_DEVICE(0x102c, 0x6151), }, + { USB_DEVICE(0x102c, 0x6251), }, + { USB_DEVICE(0x102c, 0x6253), }, + { USB_DEVICE(0x102c, 0x6254), }, + { USB_DEVICE(0x102c, 0x6255), }, + { USB_DEVICE(0x102c, 0x6256), }, + { USB_DEVICE(0x102c, 0x6257), }, + { USB_DEVICE(0x102c, 0x6258), }, + { USB_DEVICE(0x102c, 0x6259), }, + { USB_DEVICE(0x102c, 0x625a), }, + { USB_DEVICE(0x102c, 0x625b), }, + { USB_DEVICE(0x102c, 0x625c), }, + { USB_DEVICE(0x102c, 0x625d), }, + { USB_DEVICE(0x102c, 0x625e), }, + { USB_DEVICE(0x102c, 0x625f), }, + { USB_DEVICE(0x102c, 0x6260), }, + { USB_DEVICE(0x102c, 0x6261), }, + { USB_DEVICE(0x102c, 0x6262), }, + { USB_DEVICE(0x102c, 0x6263), }, + { USB_DEVICE(0x102c, 0x6264), }, + { USB_DEVICE(0x102c, 0x6265), }, + { USB_DEVICE(0x102c, 0x6266), }, + { USB_DEVICE(0x102c, 0x6267), }, + { USB_DEVICE(0x102c, 0x6268), }, + { USB_DEVICE(0x102c, 0x6269), }, + { } +}; + +ET61X251_SENSOR_TABLE + +/*****************************************************************************/ + +enum et61x251_frame_state { + F_UNUSED, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +struct et61x251_frame_t { + void* bufmem; + struct v4l2_buffer buf; + enum et61x251_frame_state state; + struct list_head frame; + unsigned long vma_use_count; +}; + +enum et61x251_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +enum et61x251_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum et61x251_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +struct et61x251_sysfs_attr { + u8 reg, i2c_reg; +}; + +struct et61x251_module_param { + u8 force_munmap; + u16 frame_timeout; +}; + +static DEFINE_MUTEX(et61x251_sysfs_lock); +static DECLARE_RWSEM(et61x251_disconnect); + +struct et61x251_device { + struct video_device* v4ldev; + + struct et61x251_sensor sensor; + + struct usb_device* usbdev; + struct urb* urb[ET61X251_URBS]; + void* transfer_buffer[ET61X251_URBS]; + u8* control_buffer; + + struct et61x251_frame_t *frame_current, frame[ET61X251_MAX_FRAMES]; + struct list_head inqueue, outqueue; + u32 frame_count, nbuffers, nreadbuffers; + + enum et61x251_io_method io; + enum et61x251_stream_state stream; + + struct v4l2_jpegcompression compression; + + struct et61x251_sysfs_attr sysfs; + struct et61x251_module_param module_param; + + enum et61x251_dev_state state; + u8 users; + + struct mutex dev_mutex, fileop_mutex; + spinlock_t queue_lock; + wait_queue_head_t open, wait_frame, wait_stream; +}; + +/*****************************************************************************/ + +struct et61x251_device* +et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id) +{ + if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id)) + return cam; + + return NULL; +} + + +void +et61x251_attach_sensor(struct et61x251_device* cam, + struct et61x251_sensor* sensor) +{ + memcpy(&cam->sensor, sensor, sizeof(struct et61x251_sensor)); +} + +/*****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef ET61X251_DEBUG +# define DBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1) \ + dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) == 2) \ + dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) >= 3) \ + dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} while (0) +# define KDBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1 || (level) == 2) \ + pr_info("et61x251: " fmt "\n", ## args); \ + else if ((level) == 3) \ + pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} while (0) +# define V4LDBG(level, name, cmd) \ +do { \ + if (debug >= (level)) \ + v4l_print_ioctl(name, cmd); \ +} while (0) +#else +# define DBG(level, fmt, args...) do {;} while(0) +# define KDBG(level, fmt, args...) do {;} while(0) +# define V4LDBG(level, name, cmd) do {;} while(0) +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args) + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ + +#endif /* _ET61X251_H_ */ diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c new file mode 100644 index 00000000000..7cc01b828b3 --- /dev/null +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -0,0 +1,2630 @@ +/*************************************************************************** + * V4L2 driver for ET61X[12]51 PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/byteorder/generic.h> +#include <asm/page.h> +#include <asm/uaccess.h> + +#include "et61x251.h" + +/*****************************************************************************/ + +#define ET61X251_MODULE_NAME "V4L2 driver for ET61X[12]51 " \ + "PC Camera Controllers" +#define ET61X251_MODULE_AUTHOR "(C) 2006 Luca Risolia" +#define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define ET61X251_MODULE_LICENSE "GPL" +#define ET61X251_MODULE_VERSION "1:1.02" +#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 2) + +/*****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, et61x251_id_table); + +MODULE_AUTHOR(ET61X251_MODULE_AUTHOR " " ET61X251_AUTHOR_EMAIL); +MODULE_DESCRIPTION(ET61X251_MODULE_NAME); +MODULE_VERSION(ET61X251_MODULE_VERSION); +MODULE_LICENSE(ET61X251_MODULE_LICENSE); + +static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1}; +module_param_array(video_nr, short, NULL, 0444); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L2 minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to " + __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second registered camera and use auto for the first" + "\none and for every other camera." + "\n"); + +static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] = + ET61X251_FORCE_MUNMAP}; +module_param_array(force_munmap, bool, NULL, 0444); +MODULE_PARM_DESC(force_munmap, + "\n<0|1[,...]> Force the application to unmap previously" + "\nmapped buffer memory before calling any VIDIOC_S_CROP or" + "\nVIDIOC_S_FMT ioctl's. Not all the applications support" + "\nthis feature. This parameter is specific for each" + "\ndetected camera." + "\n 0 = do not force memory unmapping" + "\n 1 = force memory unmapping (save memory)" + "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"." + "\n"); + +static unsigned int frame_timeout[] = {[0 ... ET61X251_MAX_DEVICES-1] = + ET61X251_FRAME_TIMEOUT}; +module_param_array(frame_timeout, uint, NULL, 0644); +MODULE_PARM_DESC(frame_timeout, + "\n<n[,...]> Timeout for a video frame in seconds." + "\nThis parameter is specific for each detected camera." + "\nDefault value is " + __MODULE_STRING(ET61X251_FRAME_TIMEOUT)"." + "\n"); + +#ifdef ET61X251_DEBUG +static unsigned short debug = ET61X251_DEBUG_LEVEL; +module_param(debug, ushort, 0644); +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 3:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = more verbose messages" + "\nLevel 3 is useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"." + "\n"); +#endif + +/*****************************************************************************/ + +static u32 +et61x251_request_buffers(struct et61x251_device* cam, u32 count, + enum et61x251_io_method io) +{ + struct v4l2_pix_format* p = &(cam->sensor.pix_format); + struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); + const size_t imagesize = cam->module_param.force_munmap || + io == IO_READ ? + (p->width * p->height * p->priv) / 8 : + (r->width * r->height * p->priv) / 8; + void* buff = NULL; + u32 i; + + if (count > ET61X251_MAX_FRAMES) + count = ET61X251_MAX_FRAMES; + + cam->nbuffers = count; + while (cam->nbuffers > 0) { + if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize)))) + break; + cam->nbuffers--; + } + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.index = i; + cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.length = imagesize; + cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->frame[i].buf.sequence = 0; + cam->frame[i].buf.field = V4L2_FIELD_NONE; + cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; + cam->frame[i].buf.flags = 0; + } + + return cam->nbuffers; +} + + +static void et61x251_release_buffers(struct et61x251_device* cam) +{ + if (cam->nbuffers) { + vfree(cam->frame[0].bufmem); + cam->nbuffers = 0; + } + cam->frame_current = NULL; +} + + +static void et61x251_empty_framequeues(struct et61x251_device* cam) +{ + u32 i; + + INIT_LIST_HEAD(&cam->inqueue); + INIT_LIST_HEAD(&cam->outqueue); + + for (i = 0; i < ET61X251_MAX_FRAMES; i++) { + cam->frame[i].state = F_UNUSED; + cam->frame[i].buf.bytesused = 0; + } +} + + +static void et61x251_requeue_outqueue(struct et61x251_device* cam) +{ + struct et61x251_frame_t *i; + + list_for_each_entry(i, &cam->outqueue, frame) { + i->state = F_QUEUED; + list_add(&i->frame, &cam->inqueue); + } + + INIT_LIST_HEAD(&cam->outqueue); +} + + +static void et61x251_queue_unusedframes(struct et61x251_device* cam) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].state == F_UNUSED) { + cam->frame[i].state = F_QUEUED; + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[i].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + } +} + +/*****************************************************************************/ + +int et61x251_write_reg(struct et61x251_device* cam, u8 value, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + *buff = value; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, index, buff, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) { + DBG(3, "Failed to write a register (value 0x%02X, index " + "0x%02X, error %d)", value, index, res); + return -1; + } + + return 0; +} + + +int et61x251_read_reg(struct et61x251_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0, index, buff, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + DBG(3, "Failed to read a register (index 0x%02X, error %d)", + index, res); + + return (res >= 0) ? (int)(*buff) : -1; +} + + +static int +et61x251_i2c_wait(struct et61x251_device* cam, struct et61x251_sensor* sensor) +{ + int i, r; + + for (i = 1; i <= 8; i++) { + if (sensor->interface == ET61X251_I2C_3WIRES) { + r = et61x251_read_reg(cam, 0x8e); + if (!(r & 0x02) && (r >= 0)) + return 0; + } else { + r = et61x251_read_reg(cam, 0x8b); + if (!(r & 0x01) && (r >= 0)) + return 0; + } + if (r < 0) + return -EIO; + udelay(8*8); /* minimum for sensors at 400kHz */ + } + + return -EBUSY; +} + + +int +et61x251_i2c_try_read(struct et61x251_device* cam, + struct et61x251_sensor* sensor, u8 address) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x10; + data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02); + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, sensor); + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + if (err) + DBG(3, "I2C read failed for %s image sensor", sensor->name); + + PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]); + + return err ? -1 : (int)data[0]; +} + + +int +et61x251_i2c_try_write(struct et61x251_device* cam, + struct et61x251_sensor* sensor, u8 address, u8 value) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x12; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + data[0] = value; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, sensor); + + if (err) + DBG(3, "I2C write failed for %s image sensor", sensor->name); + + PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value); + + return err ? -1 : 0; +} + + +int +et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2, + u8 data3, u8 data4, u8 data5, u8 data6, u8 data7, + u8 data8, u8 address) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = data2; + data[1] = data3; + data[2] = data4; + data[3] = data5; + data[4] = data6; + data[5] = data7; + data[6] = data8; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x02 | (n << 4); + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + /* Start writing through the serial interface */ + data[0] = data1; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, &cam->sensor); + + if (err) + DBG(3, "I2C raw write failed for %s image sensor", + cam->sensor.name); + + PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, " + "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X," + " data6 = 0x%02X, data7 = 0x%02X, data8 = 0x%02X", n, address, + data1, data2, data3, data4, data5, data6, data7, data8); + + return err ? -1 : 0; + +} + + +int et61x251_i2c_read(struct et61x251_device* cam, u8 address) +{ + return et61x251_i2c_try_read(cam, &cam->sensor, address); +} + + +int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value) +{ + return et61x251_i2c_try_write(cam, &cam->sensor, address, value); +} + +/*****************************************************************************/ + +static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs) +{ + struct et61x251_device* cam = urb->context; + struct et61x251_frame_t** f; + size_t imagesize; + u8 i; + int err = 0; + + if (urb->status == -ENOENT) + return; + + f = &cam->frame_current; + + if (cam->stream == STREAM_INTERRUPT) { + cam->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + DBG(3, "Stream interrupted"); + wake_up(&cam->wait_stream); + } + + if (cam->state & DEV_DISCONNECTED) + return; + + if (cam->state & DEV_MISCONFIGURED) { + wake_up_interruptible(&cam->wait_frame); + return; + } + + if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) + goto resubmit_urb; + + if (!(*f)) + (*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t, + frame); + + imagesize = (cam->sensor.pix_format.width * + cam->sensor.pix_format.height * + cam->sensor.pix_format.priv) / 8; + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int len, status; + void *pos; + u8* b1, * b2, sof; + const u8 VOID_BYTES = 6; + size_t imglen; + + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status) { + DBG(3, "Error in isochronous frame"); + (*f)->state = F_ERROR; + continue; + } + + b1 = pos++; + b2 = pos++; + sof = ((*b1 & 0x3f) == 63); + imglen = ((*b1 & 0xc0) << 2) | *b2; + + PDBGG("Isochrnous frame: length %u, #%u i, image length %zu", + len, i, imglen); + + if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) +start_of_frame: + if (sof) { + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + do_gettimeofday(&(*f)->buf.timestamp); + pos += 22; + DBG(3, "SOF detected: new video frame"); + } + + if ((*f)->state == F_GRABBING) { + if (sof && (*f)->buf.bytesused) { + if (cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_ET61X251) + goto end_of_frame; + else { + DBG(3, "Not expected SOF detected " + "after %lu bytes", + (unsigned long)(*f)->buf.bytesused); + (*f)->state = F_ERROR; + continue; + } + } + + if ((*f)->buf.bytesused + imglen > imagesize) { + DBG(3, "Video frame size exceeded"); + (*f)->state = F_ERROR; + continue; + } + + pos += VOID_BYTES; + + memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, imglen); + (*f)->buf.bytesused += imglen; + + if ((*f)->buf.bytesused == imagesize) { + u32 b; +end_of_frame: + b = (*f)->buf.bytesused; + (*f)->state = F_DONE; + (*f)->buf.sequence= ++cam->frame_count; + spin_lock(&cam->queue_lock); + list_move_tail(&(*f)->frame, &cam->outqueue); + if (!list_empty(&cam->inqueue)) + (*f) = list_entry(cam->inqueue.next, + struct et61x251_frame_t, + frame); + else + (*f) = NULL; + spin_unlock(&cam->queue_lock); + DBG(3, "Video frame captured: : %lu bytes", + (unsigned long)(b)); + + if (!(*f)) + goto resubmit_urb; + + if (sof && + cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_ET61X251) + goto start_of_frame; + } + } + } + +resubmit_urb: + urb->dev = cam->usbdev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0 && err != -EPERM) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "usb_submit_urb() failed"); + } + + wake_up_interruptible(&cam->wait_frame); +} + + +static int et61x251_start_transfer(struct et61x251_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832, + 864, 896, 920, 956, 980, 1000, + 1022}; + const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING]; + s8 i, j; + int err = 0; + + for (i = 0; i < ET61X251_URBS; i++) { + cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz, + GFP_KERNEL); + if (!cam->transfer_buffer[i]) { + err = -ENOMEM; + DBG(1, "Not enough memory"); + goto free_buffers; + } + } + + for (i = 0; i < ET61X251_URBS; i++) { + urb = usb_alloc_urb(ET61X251_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + err = -ENOMEM; + DBG(1, "usb_alloc_urb() failed"); + goto free_urbs; + } + urb->dev = udev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = ET61X251_ISO_PACKETS; + urb->complete = et61x251_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = psz * ET61X251_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < ET61X251_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = psz * j; + urb->iso_frame_desc[j].length = psz; + } + } + + err = et61x251_write_reg(cam, 0x01, 0x03); + err = et61x251_write_reg(cam, 0x00, 0x03); + err = et61x251_write_reg(cam, 0x08, 0x03); + if (err) { + err = -EIO; + DBG(1, "I/O hardware error"); + goto free_urbs; + } + + err = usb_set_interface(udev, 0, ET61X251_ALTERNATE_SETTING); + if (err) { + DBG(1, "usb_set_interface() failed"); + goto free_urbs; + } + + cam->frame_current = NULL; + + for (i = 0; i < ET61X251_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + for (j = i-1; j >= 0; j--) + usb_kill_urb(cam->urb[j]); + DBG(1, "usb_submit_urb() failed, error %d", err); + goto free_urbs; + } + } + + return 0; + +free_urbs: + for (i = 0; (i < ET61X251_URBS) && cam->urb[i]; i++) + usb_free_urb(cam->urb[i]); + +free_buffers: + for (i = 0; (i < ET61X251_URBS) && cam->transfer_buffer[i]; i++) + kfree(cam->transfer_buffer[i]); + + return err; +} + + +static int et61x251_stop_transfer(struct et61x251_device* cam) +{ + struct usb_device *udev = cam->usbdev; + s8 i; + int err = 0; + + if (cam->state & DEV_DISCONNECTED) + return 0; + + for (i = ET61X251_URBS-1; i >= 0; i--) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + kfree(cam->transfer_buffer[i]); + } + + err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + if (err) + DBG(3, "usb_set_interface() failed"); + + return err; +} + + +static int et61x251_stream_interrupt(struct et61x251_device* cam) +{ + long timeout; + + cam->stream = STREAM_INTERRUPT; + timeout = wait_event_timeout(cam->wait_stream, + (cam->stream == STREAM_OFF) || + (cam->state & DEV_DISCONNECTED), + ET61X251_URB_TIMEOUT); + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + else if (cam->stream != STREAM_OFF) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "URB timeout reached. The camera is misconfigured. To " + "use it, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + return 0; +} + +/*****************************************************************************/ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count) +{ + char str[5]; + char* endp; + unsigned long val; + + if (len < 4) { + strncpy(str, buff, len); + str[len+1] = '\0'; + } else { + strncpy(str, buff, 4); + str[4] = '\0'; + } + + val = simple_strtoul(str, &endp, 0); + + *count = 0; + if (val <= 0xff) + *count = (ssize_t)(endp - str); + if ((*count) && (len == *count+1) && (buff[*count] == '\n')) + *count += 1; + + return (u8)val; +} + +/* + NOTE 1: being inside one of the following methods implies that the v4l + device exists for sure (see kobjects and reference counters) + NOTE 2: buffers are PAGE_SIZE long +*/ + +static ssize_t et61x251_show_reg(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.reg); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + index = et61x251_strtou8(buf, len, &count); + if (index > 0x8e || !count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.reg = index; + + DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t et61x251_show_val(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_val(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + value = et61x251_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + err = et61x251_write_reg(cam, value, cam->sysfs.reg); + if (err) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + DBG(2, "Written ET61X[12]51 reg. 0x%02X, val. 0x%02X", + cam->sysfs.reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + index = et61x251_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.i2c_reg = index; + + DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENOSYS; + } + + if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENOSYS; + } + + value = et61x251_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value); + if (err) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X", + cam->sysfs.i2c_reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR, + et61x251_show_reg, et61x251_store_reg); +static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR, + et61x251_show_val, et61x251_store_val); +static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR, + et61x251_show_i2c_reg, et61x251_store_i2c_reg); +static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR, + et61x251_show_i2c_val, et61x251_store_i2c_val); + + +static void et61x251_create_sysfs(struct et61x251_device* cam) +{ + struct video_device *v4ldev = cam->v4ldev; + + video_device_create_file(v4ldev, &class_device_attr_reg); + video_device_create_file(v4ldev, &class_device_attr_val); + if (cam->sensor.sysfs_ops) { + video_device_create_file(v4ldev, &class_device_attr_i2c_reg); + video_device_create_file(v4ldev, &class_device_attr_i2c_val); + } +} +#endif /* CONFIG_VIDEO_ADV_DEBUG */ + +/*****************************************************************************/ + +static int +et61x251_set_pix_format(struct et61x251_device* cam, + struct v4l2_pix_format* pix) +{ + int r, err = 0; + + if ((r = et61x251_read_reg(cam, 0x12)) < 0) + err += r; + if (pix->pixelformat == V4L2_PIX_FMT_ET61X251) + err += et61x251_write_reg(cam, r & 0xfd, 0x12); + else + err += et61x251_write_reg(cam, r | 0x02, 0x12); + + return err ? -EIO : 0; +} + + +static int +et61x251_set_compression(struct et61x251_device* cam, + struct v4l2_jpegcompression* compression) +{ + int r, err = 0; + + if ((r = et61x251_read_reg(cam, 0x12)) < 0) + err += r; + if (compression->quality == 0) + err += et61x251_write_reg(cam, r & 0xfb, 0x12); + else + err += et61x251_write_reg(cam, r | 0x04, 0x12); + + return err ? -EIO : 0; +} + + +static int et61x251_set_scale(struct et61x251_device* cam, u8 scale) +{ + int r = 0, err = 0; + + r = et61x251_read_reg(cam, 0x12); + if (r < 0) + err += r; + + if (scale == 1) + err += et61x251_write_reg(cam, r & ~0x01, 0x12); + else if (scale == 2) + err += et61x251_write_reg(cam, r | 0x01, 0x12); + + if (err) + return -EIO; + + PDBGG("Scaling factor: %u", scale); + + return 0; +} + + +static int +et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect) +{ + struct et61x251_sensor* s = &cam->sensor; + u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left + + s->active_pixel.left), + fmw_sy = (u16)(rect->top - s->cropcap.bounds.top + + s->active_pixel.top), + fmw_length = (u16)(rect->width), + fmw_height = (u16)(rect->height); + int err = 0; + + err += et61x251_write_reg(cam, fmw_sx & 0xff, 0x69); + err += et61x251_write_reg(cam, fmw_sy & 0xff, 0x6a); + err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b); + err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c); + err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6) + | ((fmw_length & 0x300) >> 4) + | ((fmw_height & 0x300) >> 2), 0x6d); + if (err) + return -EIO; + + PDBGG("fmw_sx, fmw_sy, fmw_length, fmw_height: %u %u %u %u", + fmw_sx, fmw_sy, fmw_length, fmw_height); + + return 0; +} + + +static int et61x251_init(struct et61x251_device* cam) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + struct v4l2_queryctrl *qctrl; + struct v4l2_rect* rect; + u8 i = 0; + int err = 0; + + if (!(cam->state & DEV_INITIALIZED)) { + init_waitqueue_head(&cam->open); + qctrl = s->qctrl; + rect = &(s->cropcap.defrect); + cam->compression.quality = ET61X251_COMPRESSION_QUALITY; + } else { /* use current values */ + qctrl = s->_qctrl; + rect = &(s->_rect); + } + + err += et61x251_set_scale(cam, rect->width / s->pix_format.width); + err += et61x251_set_crop(cam, rect); + if (err) + return err; + + if (s->init) { + err = s->init(cam); + if (err) { + DBG(3, "Sensor initialization failed"); + return err; + } + } + + err += et61x251_set_compression(cam, &cam->compression); + err += et61x251_set_pix_format(cam, &s->pix_format); + if (s->set_pix_format) + err += s->set_pix_format(cam, &s->pix_format); + if (err) + return err; + + if (s->pix_format.pixelformat == V4L2_PIX_FMT_ET61X251) + DBG(3, "Compressed video format is active, quality %d", + cam->compression.quality); + else + DBG(3, "Uncompressed video format is active"); + + if (s->set_crop) + if ((err = s->set_crop(cam, rect))) { + DBG(3, "set_crop() failed"); + return err; + } + + if (s->set_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && + !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { + ctrl.id = s->qctrl[i].id; + ctrl.value = qctrl[i].default_value; + err = s->set_ctrl(cam, &ctrl); + if (err) { + DBG(3, "Set %s control failed", + s->qctrl[i].name); + return err; + } + DBG(3, "Image sensor supports '%s' control", + s->qctrl[i].name); + } + } + + if (!(cam->state & DEV_INITIALIZED)) { + mutex_init(&cam->fileop_mutex); + spin_lock_init(&cam->queue_lock); + init_waitqueue_head(&cam->wait_frame); + init_waitqueue_head(&cam->wait_stream); + cam->nreadbuffers = 2; + memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); + memcpy(&(s->_rect), &(s->cropcap.defrect), + sizeof(struct v4l2_rect)); + cam->state |= DEV_INITIALIZED; + } + + DBG(2, "Initialization succeeded"); + return 0; +} + + +static void et61x251_release_resources(struct et61x251_device* cam) +{ + mutex_lock(&et61x251_sysfs_lock); + + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + video_set_drvdata(cam->v4ldev, NULL); + video_unregister_device(cam->v4ldev); + + usb_put_dev(cam->usbdev); + + mutex_unlock(&et61x251_sysfs_lock); + + kfree(cam->control_buffer); +} + +/*****************************************************************************/ + +static int et61x251_open(struct inode* inode, struct file* filp) +{ + struct et61x251_device* cam; + int err = 0; + + /* + This is the only safe way to prevent race conditions with + disconnect + */ + if (!down_read_trylock(&et61x251_disconnect)) + return -ERESTARTSYS; + + cam = video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->dev_mutex)) { + up_read(&et61x251_disconnect); + return -ERESTARTSYS; + } + + if (cam->users) { + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + if ((filp->f_flags & O_NONBLOCK) || + (filp->f_flags & O_NDELAY)) { + err = -EWOULDBLOCK; + goto out; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->state & DEV_DISCONNECTED + || !cam->users); + if (err) { + up_read(&et61x251_disconnect); + return err; + } + if (cam->state & DEV_DISCONNECTED) { + up_read(&et61x251_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + + if (cam->state & DEV_MISCONFIGURED) { + err = et61x251_init(cam); + if (err) { + DBG(1, "Initialization failed again. " + "I will retry on next open()."); + goto out; + } + cam->state &= ~DEV_MISCONFIGURED; + } + + if ((err = et61x251_start_transfer(cam))) + goto out; + + filp->private_data = cam; + cam->users++; + cam->io = IO_NONE; + cam->stream = STREAM_OFF; + cam->nbuffers = 0; + cam->frame_count = 0; + et61x251_empty_framequeues(cam); + + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + +out: + mutex_unlock(&cam->dev_mutex); + up_read(&et61x251_disconnect); + return err; +} + + +static int et61x251_release(struct inode* inode, struct file* filp) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + et61x251_stop_transfer(cam); + + et61x251_release_buffers(cam); + + if (cam->state & DEV_DISCONNECTED) { + et61x251_release_resources(cam); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + wake_up_interruptible_nr(&cam->open, 1); + + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + + mutex_unlock(&cam->dev_mutex); + + return 0; +} + + +static ssize_t +et61x251_read(struct file* filp, char __user * buf, + size_t count, loff_t* f_pos) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_frame_t* f, * i; + unsigned long lock_flags; + long timeout; + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io == IO_MMAP) { + DBG(3, "Close and open the device again to choose the read " + "method"); + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + if (cam->io == IO_NONE) { + if (!et61x251_request_buffers(cam, cam->nreadbuffers, + IO_READ)) { + DBG(1, "read() failed, not enough memory"); + mutex_unlock(&cam->fileop_mutex); + return -ENOMEM; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (list_empty(&cam->inqueue)) { + if (!list_empty(&cam->outqueue)) + et61x251_empty_framequeues(cam); + et61x251_queue_unusedframes(cam); + } + + if (!count) { + mutex_unlock(&cam->fileop_mutex); + return 0; + } + + if (list_empty(&cam->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) { + mutex_unlock(&cam->fileop_mutex); + return timeout; + } + if (cam->state & DEV_DISCONNECTED) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + if (!timeout || (cam->state & DEV_MISCONFIGURED)) { + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + } + + f = list_entry(cam->outqueue.prev, struct et61x251_frame_t, frame); + + if (count > f->buf.bytesused) + count = f->buf.bytesused; + + if (copy_to_user(buf, f->bufmem, count)) { + err = -EFAULT; + goto exit; + } + *f_pos += count; + +exit: + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(i, &cam->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + et61x251_queue_unusedframes(cam); + + PDBGG("Frame #%lu, bytes read: %zu", + (unsigned long)f->buf.index, count); + + mutex_unlock(&cam->fileop_mutex); + + return err ? err : count; +} + + +static unsigned int et61x251_poll(struct file *filp, poll_table *wait) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_frame_t* f; + unsigned long lock_flags; + unsigned int mask = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return POLLERR; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + goto error; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + goto error; + } + + if (cam->io == IO_NONE) { + if (!et61x251_request_buffers(cam, cam->nreadbuffers, + IO_READ)) { + DBG(1, "poll() failed, not enough memory"); + goto error; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (cam->io == IO_READ) { + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(f, &cam->outqueue, frame) + f->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + et61x251_queue_unusedframes(cam); + } + + poll_wait(filp, &cam->wait_frame, wait); + + if (!list_empty(&cam->outqueue)) + mask |= POLLIN | POLLRDNORM; + + mutex_unlock(&cam->fileop_mutex); + + return mask; + +error: + mutex_unlock(&cam->fileop_mutex); + return POLLERR; +} + + +static void et61x251_vm_open(struct vm_area_struct* vma) +{ + struct et61x251_frame_t* f = vma->vm_private_data; + f->vma_use_count++; +} + + +static void et61x251_vm_close(struct vm_area_struct* vma) +{ + /* NOTE: buffers are not freed here */ + struct et61x251_frame_t* f = vma->vm_private_data; + f->vma_use_count--; +} + + +static struct vm_operations_struct et61x251_vm_ops = { + .open = et61x251_vm_open, + .close = et61x251_vm_close, +}; + + +static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(cam->frame[0].buf.length)) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) { + if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == cam->nbuffers) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; + + pos = cam->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &et61x251_vm_ops; + vma->vm_private_data = &cam->frame[i]; + + et61x251_vm_open(vma); + + mutex_unlock(&cam->fileop_mutex); + + return 0; +} + +/*****************************************************************************/ + +static int +et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_capability cap = { + .driver = "et61x251", + .version = ET61X251_MODULE_VERSION_CODE, + .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, + }; + + strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); + if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) + strlcpy(cap.bus_info, cam->usbdev->dev.bus_id, + sizeof(cap.bus_info)); + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_input i; + + if (copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; + + if (i.index) + return -EINVAL; + + memset(&i, 0, sizeof(i)); + strcpy(i.name, "Camera"); + i.type = V4L2_INPUT_TYPE_CAMERA; + + if (copy_to_user(arg, &i, sizeof(i))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_g_input(struct et61x251_device* cam, void __user * arg) +{ + int index = 0; + + if (copy_to_user(arg, &index, sizeof(index))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_input(struct et61x251_device* cam, void __user * arg) +{ + int index; + + if (copy_from_user(&index, arg, sizeof(index))) + return -EFAULT; + + if (index != 0) + return -EINVAL; + + return 0; +} + + +static int +et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_queryctrl qc; + u8 i; + + if (copy_from_user(&qc, arg, sizeof(qc))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (qc.id && qc.id == s->qctrl[i].id) { + memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); + if (copy_to_user(arg, &qc, sizeof(qc))) + return -EFAULT; + return 0; + } + + return -EINVAL; +} + + +static int +et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + int err = 0; + u8 i; + + if (!s->get_ctrl && !s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + if (!s->get_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + ctrl.value = s->_qctrl[i].default_value; + goto exit; + } + return -EINVAL; + } else + err = s->get_ctrl(cam, &ctrl); + +exit: + if (copy_to_user(arg, &ctrl, sizeof(ctrl))) + return -EFAULT; + + return err; +} + + +static int +et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + u8 i; + int err = 0; + + if (!s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) + return -EINVAL; + if (ctrl.value < s->qctrl[i].minimum || + ctrl.value > s->qctrl[i].maximum) + return -ERANGE; + ctrl.value -= ctrl.value % s->qctrl[i].step; + break; + } + + if ((err = s->set_ctrl(cam, &ctrl))) + return err; + + s->_qctrl[i].default_value = ctrl.value; + + return 0; +} + + +static int +et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_cropcap* cc = &(cam->sensor.cropcap); + + cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cc->pixelaspect.numerator = 1; + cc->pixelaspect.denominator = 1; + + if (copy_to_user(arg, cc, sizeof(*cc))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_crop crop = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + }; + + memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); + + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_crop crop; + struct v4l2_rect* rect; + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_pix_format* pix_format = &(s->pix_format); + u8 scale; + const enum et61x251_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&crop, arg, sizeof(crop))) + return -EFAULT; + + rect = &(crop.c); + + if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_CROP failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + /* Preserve R,G or B origin */ + rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L; + rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L; + + if (rect->width < 4) + rect->width = 4; + if (rect->height < 4) + rect->height = 4; + if (rect->width > bounds->width) + rect->width = bounds->width; + if (rect->height > bounds->height) + rect->height = bounds->height; + if (rect->left < bounds->left) + rect->left = bounds->left; + if (rect->top < bounds->top) + rect->top = bounds->top; + if (rect->left + rect->width > bounds->left + bounds->width) + rect->left = bounds->left+bounds->width - rect->width; + if (rect->top + rect->height > bounds->top + bounds->height) + rect->top = bounds->top+bounds->height - rect->height; + + rect->width &= ~3L; + rect->height &= ~3L; + + if (ET61X251_PRESERVE_IMGSCALE) { + /* Calculate the actual scaling factor */ + u32 a, b; + a = rect->width * rect->height; + b = pix_format->width * pix_format->height; + scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1; + } else + scale = 1; + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &crop, sizeof(crop))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + et61x251_release_buffers(cam); + + err = et61x251_set_crop(cam, rect); + if (s->set_crop) + err += s->set_crop(cam, rect); + err += et61x251_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + s->pix_format.width = rect->width/scale; + s->pix_format.height = rect->height/scale; + memcpy(&(s->_rect), rect, sizeof(*rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + et61x251_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + et61x251_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_fmtdesc fmtd; + + if (copy_from_user(&fmtd, arg, sizeof(fmtd))) + return -EFAULT; + + if (fmtd.index == 0) { + strcpy(fmtd.description, "bayer rgb"); + fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8; + } else if (fmtd.index == 1) { + strcpy(fmtd.description, "compressed"); + fmtd.pixelformat = V4L2_PIX_FMT_ET61X251; + fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; + } else + return -EINVAL; + + fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); + + if (copy_to_user(arg, &fmtd, sizeof(fmtd))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_format format; + struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251) + ? 0 : (pfmt->width * pfmt->priv) / 8; + pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); + pfmt->field = V4L2_FIELD_NONE; + memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); + + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd, + void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_format format; + struct v4l2_pix_format* pix; + struct v4l2_pix_format* pfmt = &(s->pix_format); + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_rect rect; + u8 scale; + const enum et61x251_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + pix = &(format.fmt.pix); + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memcpy(&rect, &(s->_rect), sizeof(rect)); + + { /* calculate the actual scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1; + } + + rect.width = scale * pix->width; + rect.height = scale * pix->height; + + if (rect.width < 4) + rect.width = 4; + if (rect.height < 4) + rect.height = 4; + if (rect.width > bounds->left + bounds->width - rect.left) + rect.width = bounds->left + bounds->width - rect.left; + if (rect.height > bounds->top + bounds->height - rect.top) + rect.height = bounds->top + bounds->height - rect.top; + + rect.width &= ~3L; + rect.height &= ~3L; + + { /* adjust the scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1; + } + + pix->width = rect.width / scale; + pix->height = rect.height / scale; + + if (pix->pixelformat != V4L2_PIX_FMT_ET61X251 && + pix->pixelformat != V4L2_PIX_FMT_SBGGR8) + pix->pixelformat = pfmt->pixelformat; + pix->priv = pfmt->priv; /* bpp */ + pix->colorspace = pfmt->colorspace; + pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251) + ? 0 : (pix->width * pix->priv) / 8; + pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); + pix->field = V4L2_FIELD_NONE; + + if (cmd == VIDIOC_TRY_FMT) { + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + return 0; + } + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_FMT failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &format, sizeof(format))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + et61x251_release_buffers(cam); + + err += et61x251_set_pix_format(cam, pix); + err += et61x251_set_crop(cam, &rect); + if (s->set_pix_format) + err += s->set_pix_format(cam, pix); + if (s->set_crop) + err += s->set_crop(cam, &rect); + err += et61x251_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + memcpy(pfmt, pix, sizeof(*pix)); + memcpy(&(s->_rect), &rect, sizeof(rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + et61x251_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + et61x251_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg) +{ + if (copy_to_user(arg, &cam->compression, + sizeof(cam->compression))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_jpegcompression jc; + const enum et61x251_stream_state stream = cam->stream; + int err = 0; + + if (copy_from_user(&jc, arg, sizeof(jc))) + return -EFAULT; + + if (jc.quality != 0 && jc.quality != 1) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + err += et61x251_set_compression(cam, &jc); + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " + "problems. To use the camera, close and open " + "/dev/video%d again.", cam->v4ldev->minor); + return -EIO; + } + + cam->compression.quality = jc.quality; + + cam->stream = stream; + + return 0; +} + + +static int +et61x251_vidioc_reqbufs(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_requestbuffers rb; + u32 i; + int err; + + if (copy_from_user(&rb, arg, sizeof(rb))) + return -EFAULT; + + if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb.memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (cam->io == IO_READ) { + DBG(3, "Close and open the device again to choose the mmap " + "I/O method"); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_REQBUFS failed. " + "Previous buffers are still mapped."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + et61x251_empty_framequeues(cam); + + et61x251_release_buffers(cam); + if (rb.count) + rb.count = et61x251_request_buffers(cam, rb.count, IO_MMAP); + + if (copy_to_user(arg, &rb, sizeof(rb))) { + et61x251_release_buffers(cam); + cam->io = IO_NONE; + return -EFAULT; + } + + cam->io = rb.count ? IO_MMAP : IO_NONE; + + return 0; +} + + +static int +et61x251_vidioc_querybuf(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); + + if (cam->frame[b.index].vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (cam->frame[b.index].state == F_DONE) + b.flags |= V4L2_BUF_FLAG_DONE; + else if (cam->frame[b.index].state != F_UNUSED) + b.flags |= V4L2_BUF_FLAG_QUEUED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_qbuf(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + unsigned long lock_flags; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->frame[b.index].state != F_UNUSED) + return -EINVAL; + + cam->frame[b.index].state = F_QUEUED; + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + PDBGG("Frame #%lu queued", (unsigned long)b.index); + + return 0; +} + + +static int +et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp, + void __user * arg) +{ + struct v4l2_buffer b; + struct et61x251_frame_t *f; + unsigned long lock_flags; + long timeout; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->outqueue)) { + if (cam->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) + return timeout; + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + if (!timeout || (cam->state & DEV_MISCONFIGURED)) + return -EIO; + } + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + f = list_entry(cam->outqueue.next, struct et61x251_frame_t, frame); + list_del(cam->outqueue.next); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + f->state = F_UNUSED; + + memcpy(&b, &f->buf, sizeof(b)); + if (f->vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); + + return 0; +} + + +static int +et61x251_vidioc_streamon(struct et61x251_device* cam, void __user * arg) +{ + int type; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->inqueue)) + return -EINVAL; + + cam->stream = STREAM_ON; + + DBG(3, "Stream on"); + + return 0; +} + + +static int +et61x251_vidioc_streamoff(struct et61x251_device* cam, void __user * arg) +{ + int type, err; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + et61x251_empty_framequeues(cam); + + DBG(3, "Stream off"); + + return 0; +} + + +static int +et61x251_vidioc_g_parm(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + + if (sp.parm.capture.readbuffers == 0) + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (sp.parm.capture.readbuffers > ET61X251_MAX_FRAMES) + sp.parm.capture.readbuffers = ET61X251_MAX_FRAMES; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + cam->nreadbuffers = sp.parm.capture.readbuffers; + + return 0; +} + + +static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOC_QUERYCAP: + return et61x251_vidioc_querycap(cam, arg); + + case VIDIOC_ENUMINPUT: + return et61x251_vidioc_enuminput(cam, arg); + + case VIDIOC_G_INPUT: + return et61x251_vidioc_g_input(cam, arg); + + case VIDIOC_S_INPUT: + return et61x251_vidioc_s_input(cam, arg); + + case VIDIOC_QUERYCTRL: + return et61x251_vidioc_query_ctrl(cam, arg); + + case VIDIOC_G_CTRL: + return et61x251_vidioc_g_ctrl(cam, arg); + + case VIDIOC_S_CTRL_OLD: + case VIDIOC_S_CTRL: + return et61x251_vidioc_s_ctrl(cam, arg); + + case VIDIOC_CROPCAP_OLD: + case VIDIOC_CROPCAP: + return et61x251_vidioc_cropcap(cam, arg); + + case VIDIOC_G_CROP: + return et61x251_vidioc_g_crop(cam, arg); + + case VIDIOC_S_CROP: + return et61x251_vidioc_s_crop(cam, arg); + + case VIDIOC_ENUM_FMT: + return et61x251_vidioc_enum_fmt(cam, arg); + + case VIDIOC_G_FMT: + return et61x251_vidioc_g_fmt(cam, arg); + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + return et61x251_vidioc_try_s_fmt(cam, cmd, arg); + + case VIDIOC_G_JPEGCOMP: + return et61x251_vidioc_g_jpegcomp(cam, arg); + + case VIDIOC_S_JPEGCOMP: + return et61x251_vidioc_s_jpegcomp(cam, arg); + + case VIDIOC_REQBUFS: + return et61x251_vidioc_reqbufs(cam, arg); + + case VIDIOC_QUERYBUF: + return et61x251_vidioc_querybuf(cam, arg); + + case VIDIOC_QBUF: + return et61x251_vidioc_qbuf(cam, arg); + + case VIDIOC_DQBUF: + return et61x251_vidioc_dqbuf(cam, filp, arg); + + case VIDIOC_STREAMON: + return et61x251_vidioc_streamon(cam, arg); + + case VIDIOC_STREAMOFF: + return et61x251_vidioc_streamoff(cam, arg); + + case VIDIOC_G_PARM: + return et61x251_vidioc_g_parm(cam, arg); + + case VIDIOC_S_PARM_OLD: + case VIDIOC_S_PARM: + return et61x251_vidioc_s_parm(cam, arg); + + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYMENU: + return -EINVAL; + + default: + return -EINVAL; + + } +} + + +static int et61x251_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + V4LDBG(3, "et61x251", cmd); + + err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + + return err; +} + + +static struct file_operations et61x251_fops = { + .owner = THIS_MODULE, + .open = et61x251_open, + .release = et61x251_release, + .ioctl = et61x251_ioctl, + .read = et61x251_read, + .poll = et61x251_poll, + .mmap = et61x251_mmap, + .llseek = no_llseek, +}; + +/*****************************************************************************/ + +/* It exists a single interface only. We do not need to validate anything. */ +static int +et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct et61x251_device* cam; + static unsigned int dev_nr = 0; + unsigned int i; + int err = 0; + + if (!(cam = kzalloc(sizeof(struct et61x251_device), GFP_KERNEL))) + return -ENOMEM; + + cam->usbdev = udev; + + if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) { + DBG(1, "kmalloc() failed"); + err = -ENOMEM; + goto fail; + } + + if (!(cam->v4ldev = video_device_alloc())) { + DBG(1, "video_device_alloc() failed"); + err = -ENOMEM; + goto fail; + } + + mutex_init(&cam->dev_mutex); + + DBG(2, "ET61X[12]51 PC Camera Controller detected " + "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct); + + for (i = 0; et61x251_sensor_table[i]; i++) { + err = et61x251_sensor_table[i](cam); + if (!err) + break; + } + + if (!err) + DBG(2, "%s image sensor detected", cam->sensor.name); + else { + DBG(1, "No supported image sensor detected"); + err = -ENODEV; + goto fail; + } + + if (et61x251_init(cam)) { + DBG(1, "Initialization failed. I will retry on open()."); + cam->state |= DEV_MISCONFIGURED; + } + + strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera"); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = 0; + cam->v4ldev->fops = &et61x251_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + + mutex_lock(&cam->dev_mutex); + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L2 device registration failed"); + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(1, "Free /dev/videoX node not found"); + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0; + mutex_unlock(&cam->dev_mutex); + goto fail; + } + + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + + cam->module_param.force_munmap = force_munmap[dev_nr]; + cam->module_param.frame_timeout = frame_timeout[dev_nr]; + + dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + et61x251_create_sysfs(cam); + DBG(2, "Optional device control through 'sysfs' interface ready"); +#endif + + usb_set_intfdata(intf, cam); + + mutex_unlock(&cam->dev_mutex); + + return 0; + +fail: + if (cam) { + kfree(cam->control_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + kfree(cam); + } + return err; +} + + +static void et61x251_usb_disconnect(struct usb_interface* intf) +{ + struct et61x251_device* cam = usb_get_intfdata(intf); + + if (!cam) + return; + + down_write(&et61x251_disconnect); + + mutex_lock(&cam->dev_mutex); + + DBG(2, "Disconnecting %s...", cam->v4ldev->name); + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "Device /dev/video%d is open! Deregistration and " + "memory deallocation are deferred on close.", + cam->v4ldev->minor); + cam->state |= DEV_MISCONFIGURED; + et61x251_stop_transfer(cam); + cam->state |= DEV_DISCONNECTED; + wake_up_interruptible(&cam->wait_frame); + wake_up(&cam->wait_stream); + usb_get_dev(cam->usbdev); + } else { + cam->state |= DEV_DISCONNECTED; + et61x251_release_resources(cam); + } + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + + up_write(&et61x251_disconnect); +} + + +static struct usb_driver et61x251_usb_driver = { + .name = "et61x251", + .id_table = et61x251_id_table, + .probe = et61x251_usb_probe, + .disconnect = et61x251_usb_disconnect, +}; + +/*****************************************************************************/ + +static int __init et61x251_module_init(void) +{ + int err = 0; + + KDBG(2, ET61X251_MODULE_NAME " v" ET61X251_MODULE_VERSION); + KDBG(3, ET61X251_MODULE_AUTHOR); + + if ((err = usb_register(&et61x251_usb_driver))) + KDBG(1, "usb_register() failed"); + + return err; +} + + +static void __exit et61x251_module_exit(void) +{ + usb_deregister(&et61x251_usb_driver); +} + + +module_init(et61x251_module_init); +module_exit(et61x251_module_exit); diff --git a/drivers/media/video/et61x251/et61x251_sensor.h b/drivers/media/video/et61x251/et61x251_sensor.h new file mode 100644 index 00000000000..56841ae8a20 --- /dev/null +++ b/drivers/media/video/et61x251/et61x251_sensor.h @@ -0,0 +1,116 @@ +/*************************************************************************** + * API for image sensors connected to ET61X[12]51 PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ET61X251_SENSOR_H_ +#define _ET61X251_SENSOR_H_ + +#include <linux/usb.h> +#include <linux/videodev.h> +#include <linux/device.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <asm/types.h> + +struct et61x251_device; +struct et61x251_sensor; + +/*****************************************************************************/ + +extern int et61x251_probe_tas5130d1b(struct et61x251_device* cam); + +#define ET61X251_SENSOR_TABLE \ +/* Weak detections must go at the end of the list */ \ +static int (*et61x251_sensor_table[])(struct et61x251_device*) = { \ + &et61x251_probe_tas5130d1b, \ + NULL, \ +}; + +extern struct et61x251_device* +et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id); + +extern void +et61x251_attach_sensor(struct et61x251_device* cam, + struct et61x251_sensor* sensor); + +/*****************************************************************************/ + +extern int et61x251_write_reg(struct et61x251_device*, u8 value, u16 index); +extern int et61x251_read_reg(struct et61x251_device*, u16 index); +extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value); +extern int et61x251_i2c_read(struct et61x251_device*, u8 address); +extern int et61x251_i2c_try_write(struct et61x251_device*, + struct et61x251_sensor*, u8 address, + u8 value); +extern int et61x251_i2c_try_read(struct et61x251_device*, + struct et61x251_sensor*, u8 address); +extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1, + u8 data2, u8 data3, u8 data4, u8 data5, + u8 data6, u8 data7, u8 data8, u8 address); + +/*****************************************************************************/ + +enum et61x251_i2c_sysfs_ops { + ET61X251_I2C_READ = 0x01, + ET61X251_I2C_WRITE = 0x02, +}; + +enum et61x251_i2c_interface { + ET61X251_I2C_2WIRES, + ET61X251_I2C_3WIRES, +}; + +/* Repeat start condition when RSTA is high */ +enum et61x251_i2c_rsta { + ET61X251_I2C_RSTA_STOP = 0x00, /* stop then start */ + ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */ +}; + +#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 + +struct et61x251_sensor { + char name[32]; + + enum et61x251_i2c_sysfs_ops sysfs_ops; + + enum et61x251_i2c_interface interface; + u8 i2c_slave_id; + enum et61x251_i2c_rsta rsta; + struct v4l2_rect active_pixel; /* left and top define FVSX and FVSY */ + + struct v4l2_queryctrl qctrl[ET61X251_MAX_CTRLS]; + struct v4l2_cropcap cropcap; + struct v4l2_pix_format pix_format; + + int (*init)(struct et61x251_device* cam); + int (*get_ctrl)(struct et61x251_device* cam, + struct v4l2_control* ctrl); + int (*set_ctrl)(struct et61x251_device* cam, + const struct v4l2_control* ctrl); + int (*set_crop)(struct et61x251_device* cam, + const struct v4l2_rect* rect); + int (*set_pix_format)(struct et61x251_device* cam, + const struct v4l2_pix_format* pix); + + /* Private */ + struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +#endif /* _ET61X251_SENSOR_H_ */ diff --git a/drivers/media/video/et61x251/et61x251_tas5130d1b.c b/drivers/media/video/et61x251/et61x251_tas5130d1b.c new file mode 100644 index 00000000000..3998d76a307 --- /dev/null +++ b/drivers/media/video/et61x251/et61x251_tas5130d1b.c @@ -0,0 +1,141 @@ +/*************************************************************************** + * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51 * + * PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "et61x251_sensor.h" + + +static int tas5130d1b_init(struct et61x251_device* cam) +{ + int err = 0; + + err += et61x251_write_reg(cam, 0x14, 0x01); + err += et61x251_write_reg(cam, 0x1b, 0x02); + err += et61x251_write_reg(cam, 0x02, 0x12); + err += et61x251_write_reg(cam, 0x0e, 0x60); + err += et61x251_write_reg(cam, 0x80, 0x61); + err += et61x251_write_reg(cam, 0xf0, 0x62); + err += et61x251_write_reg(cam, 0x03, 0x63); + err += et61x251_write_reg(cam, 0x14, 0x64); + err += et61x251_write_reg(cam, 0xf4, 0x65); + err += et61x251_write_reg(cam, 0x01, 0x66); + err += et61x251_write_reg(cam, 0x05, 0x67); + err += et61x251_write_reg(cam, 0x8f, 0x68); + err += et61x251_write_reg(cam, 0x0f, 0x8d); + err += et61x251_write_reg(cam, 0x08, 0x8e); + + return err; +} + + +static int tas5130d1b_set_ctrl(struct et61x251_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + err += et61x251_i2c_raw_write(cam, 2, 0x20, + 0xf6-ctrl->value, 0, 0, 0, + 0, 0, 0, 0); + break; + case V4L2_CID_EXPOSURE: + err += et61x251_i2c_raw_write(cam, 2, 0x40, + 0x47-ctrl->value, 0, 0, 0, + 0, 0, 0, 0); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static struct et61x251_sensor tas5130d1b = { + .name = "TAS5130D1B", + .interface = ET61X251_I2C_3WIRES, + .rsta = ET61X251_I2C_RSTA_STOP, + .active_pixel = { + .left = 106, + .top = 13, + }, + .init = &tas5130d1b_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0xf6, + .step = 0x02, + .default_value = 0x0d, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x47, + .step = 0x01, + .default_value = 0x23, + .flags = 0, + }, + }, + .set_ctrl = &tas5130d1b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, +}; + + +int et61x251_probe_tas5130d1b(struct et61x251_device* cam) +{ + const struct usb_device_id tas5130d1b_id_table[] = { + { USB_DEVICE(0x102c, 0x6251), }, + { } + }; + + /* Sensor detection is based on USB pid/vid */ + if (!et61x251_match_id(cam, tas5130d1b_id_table)) + return -ENODEV; + + et61x251_attach_sensor(cam, &tas5130d1b); + + return 0; +} diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c new file mode 100644 index 00000000000..da44579d6f2 --- /dev/null +++ b/drivers/media/video/ov511.c @@ -0,0 +1,5932 @@ +/* + * OmniVision OV511 Camera-to-USB Bridge Driver + * + * Copyright (c) 1999-2003 Mark W. McClelland + * Original decompression code Copyright 1998-2000 OmniVision Technologies + * Many improvements by Bret Wallach <bwallac1@san.rr.com> + * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000) + * Snapshot code by Kevin Moore + * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> + * Changes by Claudio Matsuoka <claudio@conectiva.com> + * Original SAA7111A code by Dave Perks <dperks@ibm.net> + * URB error messages from pwc driver by Nemosoft + * generic_ioctl() code from videodev.c by Gerd Knorr and Alan Cox + * Memory management (rvmalloc) code from bttv driver, by Gerd Knorr and others + * + * Based on the Linux CPiA driver written by Peter Pregler, + * Scott J. Bertin and Johannes Erdfelt. + * + * Please see the file: Documentation/usb/ov511.txt + * and the website at: http://alpha.dyndns.org/ov511 + * for more info. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/pagemap.h> +#include <asm/semaphore.h> +#include <asm/processor.h> +#include <linux/mm.h> +#include <linux/device.h> + +#if defined (__i386__) + #include <asm/cpufeature.h> +#endif + +#include "ov511.h" + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.64 for Linux 2.5" +#define EMAIL "mark@alpha.dyndns.org" +#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \ + & Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \ + <cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>" +#define DRIVER_DESC "ov511 USB Camera Driver" + +#define OV511_I2C_RETRIES 3 +#define ENABLE_Y_QUANTABLE 1 +#define ENABLE_UV_QUANTABLE 1 + +#define OV511_MAX_UNIT_VIDEO 16 + +/* Pixel count * bytes per YUV420 pixel (1.5) */ +#define MAX_FRAME_SIZE(w, h) ((w) * (h) * 3 / 2) + +#define MAX_DATA_SIZE(w, h) (MAX_FRAME_SIZE(w, h) + sizeof(struct timeval)) + +/* Max size * bytes per YUV420 pixel (1.5) + one extra isoc frame for safety */ +#define MAX_RAW_DATA_SIZE(w, h) ((w) * (h) * 3 / 2 + 1024) + +#define FATAL_ERROR(rc) ((rc) < 0 && (rc) != -EPERM) + +/********************************************************************** + * Module Parameters + * (See ov511.txt for detailed descriptions of these) + **********************************************************************/ + +/* These variables (and all static globals) default to zero */ +static int autobright = 1; +static int autogain = 1; +static int autoexp = 1; +static int debug; +static int snapshot; +static int cams = 1; +static int compress; +static int testpat; +static int dumppix; +static int led = 1; +static int dump_bridge; +static int dump_sensor; +static int printph; +static int phy = 0x1f; +static int phuv = 0x05; +static int pvy = 0x06; +static int pvuv = 0x06; +static int qhy = 0x14; +static int qhuv = 0x03; +static int qvy = 0x04; +static int qvuv = 0x04; +static int lightfreq; +static int bandingfilter; +static int clockdiv = -1; +static int packetsize = -1; +static int framedrop = -1; +static int fastset; +static int force_palette; +static int backlight; +static int unit_video[OV511_MAX_UNIT_VIDEO]; +static int remove_zeros; +static int mirror; +static int ov518_color; + +module_param(autobright, int, 0); +MODULE_PARM_DESC(autobright, "Sensor automatically changes brightness"); +module_param(autogain, int, 0); +MODULE_PARM_DESC(autogain, "Sensor automatically changes gain"); +module_param(autoexp, int, 0); +MODULE_PARM_DESC(autoexp, "Sensor automatically changes exposure"); +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, + "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=max"); +module_param(snapshot, int, 0); +MODULE_PARM_DESC(snapshot, "Enable snapshot mode"); +module_param(cams, int, 0); +MODULE_PARM_DESC(cams, "Number of simultaneous cameras"); +module_param(compress, int, 0); +MODULE_PARM_DESC(compress, "Turn on compression"); +module_param(testpat, int, 0); +MODULE_PARM_DESC(testpat, + "Replace image with vertical bar testpattern (only partially working)"); +module_param(dumppix, int, 0); +MODULE_PARM_DESC(dumppix, "Dump raw pixel data"); +module_param(led, int, 0); +MODULE_PARM_DESC(led, + "LED policy (OV511+ or later). 0=off, 1=on (default), 2=auto (on when open)"); +module_param(dump_bridge, int, 0); +MODULE_PARM_DESC(dump_bridge, "Dump the bridge registers"); +module_param(dump_sensor, int, 0); +MODULE_PARM_DESC(dump_sensor, "Dump the sensor registers"); +module_param(printph, int, 0); +MODULE_PARM_DESC(printph, "Print frame start/end headers"); +module_param(phy, int, 0); +MODULE_PARM_DESC(phy, "Prediction range (horiz. Y)"); +module_param(phuv, int, 0); +MODULE_PARM_DESC(phuv, "Prediction range (horiz. UV)"); +module_param(pvy, int, 0); +MODULE_PARM_DESC(pvy, "Prediction range (vert. Y)"); +module_param(pvuv, int, 0); +MODULE_PARM_DESC(pvuv, "Prediction range (vert. UV)"); +module_param(qhy, int, 0); +MODULE_PARM_DESC(qhy, "Quantization threshold (horiz. Y)"); +module_param(qhuv, int, 0); +MODULE_PARM_DESC(qhuv, "Quantization threshold (horiz. UV)"); +module_param(qvy, int, 0); +MODULE_PARM_DESC(qvy, "Quantization threshold (vert. Y)"); +module_param(qvuv, int, 0); +MODULE_PARM_DESC(qvuv, "Quantization threshold (vert. UV)"); +module_param(lightfreq, int, 0); +MODULE_PARM_DESC(lightfreq, + "Light frequency. Set to 50 or 60 Hz, or zero for default settings"); +module_param(bandingfilter, int, 0); +MODULE_PARM_DESC(bandingfilter, + "Enable banding filter (to reduce effects of fluorescent lighting)"); +module_param(clockdiv, int, 0); +MODULE_PARM_DESC(clockdiv, "Force pixel clock divisor to a specific value"); +module_param(packetsize, int, 0); +MODULE_PARM_DESC(packetsize, "Force a specific isoc packet size"); +module_param(framedrop, int, 0); +MODULE_PARM_DESC(framedrop, "Force a specific frame drop register setting"); +module_param(fastset, int, 0); +MODULE_PARM_DESC(fastset, "Allows picture settings to take effect immediately"); +module_param(force_palette, int, 0); +MODULE_PARM_DESC(force_palette, "Force the palette to a specific value"); +module_param(backlight, int, 0); +MODULE_PARM_DESC(backlight, "For objects that are lit from behind"); +static int num_uv; +module_param_array(unit_video, int, &num_uv, 0); +MODULE_PARM_DESC(unit_video, + "Force use of specific minor number(s). 0 is not allowed."); +module_param(remove_zeros, int, 0); +MODULE_PARM_DESC(remove_zeros, + "Remove zero-padding from uncompressed incoming data"); +module_param(mirror, int, 0); +MODULE_PARM_DESC(mirror, "Reverse image horizontally"); +module_param(ov518_color, int, 0); +MODULE_PARM_DESC(ov518_color, "Enable OV518 color (experimental)"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/********************************************************************** + * Miscellaneous Globals + **********************************************************************/ + +static struct usb_driver ov511_driver; + +/* Number of times to retry a failed I2C transaction. Increase this if you + * are getting "Failed to read sensor ID..." */ +static const int i2c_detect_tries = 5; + +static struct usb_device_id device_table [] = { + { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) }, + { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) }, + { USB_DEVICE(VEND_OMNIVISION, PROD_OV518) }, + { USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) }, + { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, device_table); + +static unsigned char yQuanTable511[] = OV511_YQUANTABLE; +static unsigned char uvQuanTable511[] = OV511_UVQUANTABLE; +static unsigned char yQuanTable518[] = OV518_YQUANTABLE; +static unsigned char uvQuanTable518[] = OV518_UVQUANTABLE; + +/********************************************************************** + * Symbolic Names + **********************************************************************/ + +/* Known OV511-based cameras */ +static struct symbolic_list camlist[] = { + { 0, "Generic Camera (no ID)" }, + { 1, "Mustek WCam 3X" }, + { 3, "D-Link DSB-C300" }, + { 4, "Generic OV511/OV7610" }, + { 5, "Puretek PT-6007" }, + { 6, "Lifeview USB Life TV (NTSC)" }, + { 21, "Creative Labs WebCam 3" }, + { 22, "Lifeview USB Life TV (PAL D/K+B/G)" }, + { 36, "Koala-Cam" }, + { 38, "Lifeview USB Life TV (PAL)" }, + { 41, "Samsung Anycam MPC-M10" }, + { 43, "Mtekvision Zeca MV402" }, + { 46, "Suma eON" }, + { 70, "Lifeview USB Life TV (PAL/SECAM)" }, + { 100, "Lifeview RoboCam" }, + { 102, "AverMedia InterCam Elite" }, + { 112, "MediaForte MV300" }, /* or OV7110 evaluation kit */ + { 134, "Ezonics EZCam II" }, + { 192, "Webeye 2000B" }, + { 253, "Alpha Vision Tech. AlphaCam SE" }, + { -1, NULL } +}; + +/* Video4Linux1 Palettes */ +static struct symbolic_list v4l1_plist[] = { + { VIDEO_PALETTE_GREY, "GREY" }, + { VIDEO_PALETTE_HI240, "HI240" }, + { VIDEO_PALETTE_RGB565, "RGB565" }, + { VIDEO_PALETTE_RGB24, "RGB24" }, + { VIDEO_PALETTE_RGB32, "RGB32" }, + { VIDEO_PALETTE_RGB555, "RGB555" }, + { VIDEO_PALETTE_YUV422, "YUV422" }, + { VIDEO_PALETTE_YUYV, "YUYV" }, + { VIDEO_PALETTE_UYVY, "UYVY" }, + { VIDEO_PALETTE_YUV420, "YUV420" }, + { VIDEO_PALETTE_YUV411, "YUV411" }, + { VIDEO_PALETTE_RAW, "RAW" }, + { VIDEO_PALETTE_YUV422P,"YUV422P" }, + { VIDEO_PALETTE_YUV411P,"YUV411P" }, + { VIDEO_PALETTE_YUV420P,"YUV420P" }, + { VIDEO_PALETTE_YUV410P,"YUV410P" }, + { -1, NULL } +}; + +static struct symbolic_list brglist[] = { + { BRG_OV511, "OV511" }, + { BRG_OV511PLUS, "OV511+" }, + { BRG_OV518, "OV518" }, + { BRG_OV518PLUS, "OV518+" }, + { -1, NULL } +}; + +static struct symbolic_list senlist[] = { + { SEN_OV76BE, "OV76BE" }, + { SEN_OV7610, "OV7610" }, + { SEN_OV7620, "OV7620" }, + { SEN_OV7620AE, "OV7620AE" }, + { SEN_OV6620, "OV6620" }, + { SEN_OV6630, "OV6630" }, + { SEN_OV6630AE, "OV6630AE" }, + { SEN_OV6630AF, "OV6630AF" }, + { SEN_OV8600, "OV8600" }, + { SEN_KS0127, "KS0127" }, + { SEN_KS0127B, "KS0127B" }, + { SEN_SAA7111A, "SAA7111A" }, + { -1, NULL } +}; + +/* URB error codes: */ +static struct symbolic_list urb_errlist[] = { + { -ENOSR, "Buffer error (overrun)" }, + { -EPIPE, "Stalled (device not responding)" }, + { -EOVERFLOW, "Babble (bad cable?)" }, + { -EPROTO, "Bit-stuff error (bad cable?)" }, + { -EILSEQ, "CRC/Timeout" }, + { -ETIMEDOUT, "NAK (device does not respond)" }, + { -1, NULL } +}; + +/********************************************************************** + * Memory management + **********************************************************************/ +static void * +rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void +rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +/********************************************************************** + * + * Register I/O + * + **********************************************************************/ + +/* Write an OV51x register */ +static int +reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value) +{ + int rc; + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + mutex_lock(&ov->cbuf_lock); + ov->cbuf[0] = value; + rc = usb_control_msg(ov->dev, + usb_sndctrlpipe(ov->dev, 0), + (ov->bclass == BCL_OV518)?1:2 /* REG_IO */, + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, &ov->cbuf[0], 1, 1000); + mutex_unlock(&ov->cbuf_lock); + + if (rc < 0) + err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc)); + + return rc; +} + +/* Read from an OV51x register */ +/* returns: negative is error, pos or zero is data */ +static int +reg_r(struct usb_ov511 *ov, unsigned char reg) +{ + int rc; + + mutex_lock(&ov->cbuf_lock); + rc = usb_control_msg(ov->dev, + usb_rcvctrlpipe(ov->dev, 0), + (ov->bclass == BCL_OV518)?1:3 /* REG_IO */, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, &ov->cbuf[0], 1, 1000); + + if (rc < 0) { + err("reg read: error %d: %s", rc, symbolic(urb_errlist, rc)); + } else { + rc = ov->cbuf[0]; + PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]); + } + + mutex_unlock(&ov->cbuf_lock); + + return rc; +} + +/* + * Writes bits at positions specified by mask to an OV51x reg. Bits that are in + * the same position as 1's in "mask" are cleared and set to "value". Bits + * that are in the same position as 0's in "mask" are preserved, regardless + * of their respective state in "value". + */ +static int +reg_w_mask(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int ret; + unsigned char oldval, newval; + + ret = reg_r(ov, reg); + if (ret < 0) + return ret; + + oldval = (unsigned char) ret; + oldval &= (~mask); /* Clear the masked bits */ + value &= mask; /* Enforce mask on value */ + newval = oldval | value; /* Set the desired bits */ + + return (reg_w(ov, reg, newval)); +} + +/* + * Writes multiple (n) byte value to a single register. Only valid with certain + * registers (0x30 and 0xc4 - 0xce). + */ +static int +ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n) +{ + int rc; + + PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n); + + mutex_lock(&ov->cbuf_lock); + + *((__le32 *)ov->cbuf) = __cpu_to_le32(val); + + rc = usb_control_msg(ov->dev, + usb_sndctrlpipe(ov->dev, 0), + 1 /* REG_IO */, + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, ov->cbuf, n, 1000); + mutex_unlock(&ov->cbuf_lock); + + if (rc < 0) + err("reg write multiple: error %d: %s", rc, + symbolic(urb_errlist, rc)); + + return rc; +} + +static int +ov511_upload_quan_tables(struct usb_ov511 *ov) +{ + unsigned char *pYTable = yQuanTable511; + unsigned char *pUVTable = uvQuanTable511; + unsigned char val0, val1; + int i, rc, reg = R511_COMP_LUT_BEGIN; + + PDEBUG(4, "Uploading quantization tables"); + + for (i = 0; i < OV511_QUANTABLESIZE / 2; i++) { + if (ENABLE_Y_QUANTABLE) { + val0 = *pYTable++; + val1 = *pYTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg, val0); + if (rc < 0) + return rc; + } + + if (ENABLE_UV_QUANTABLE) { + val0 = *pUVTable++; + val1 = *pUVTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg + OV511_QUANTABLESIZE/2, val0); + if (rc < 0) + return rc; + } + + reg++; + } + + return 0; +} + +/* OV518 quantization tables are 8x4 (instead of 8x8) */ +static int +ov518_upload_quan_tables(struct usb_ov511 *ov) +{ + unsigned char *pYTable = yQuanTable518; + unsigned char *pUVTable = uvQuanTable518; + unsigned char val0, val1; + int i, rc, reg = R511_COMP_LUT_BEGIN; + + PDEBUG(4, "Uploading quantization tables"); + + for (i = 0; i < OV518_QUANTABLESIZE / 2; i++) { + if (ENABLE_Y_QUANTABLE) { + val0 = *pYTable++; + val1 = *pYTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg, val0); + if (rc < 0) + return rc; + } + + if (ENABLE_UV_QUANTABLE) { + val0 = *pUVTable++; + val1 = *pUVTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg + OV518_QUANTABLESIZE/2, val0); + if (rc < 0) + return rc; + } + + reg++; + } + + return 0; +} + +static int +ov51x_reset(struct usb_ov511 *ov, unsigned char reset_type) +{ + int rc; + + /* Setting bit 0 not allowed on 518/518Plus */ + if (ov->bclass == BCL_OV518) + reset_type &= 0xfe; + + PDEBUG(4, "Reset: type=0x%02X", reset_type); + + rc = reg_w(ov, R51x_SYS_RESET, reset_type); + rc = reg_w(ov, R51x_SYS_RESET, 0); + + if (rc < 0) + err("reset: command failed"); + + return rc; +} + +/********************************************************************** + * + * Low-level I2C I/O functions + * + **********************************************************************/ + +/* NOTE: Do not call this function directly! + * The OV518 I2C I/O procedure is different, hence, this function. + * This is normally only called from i2c_w(). Note that this function + * always succeeds regardless of whether the sensor is present and working. + */ +static int +ov518_i2c_write_internal(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value) +{ + int rc; + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(ov, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(ov, R518_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + return 0; +} + +/* NOTE: Do not call this function directly! */ +static int +ov511_i2c_write_internal(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value) +{ + int rc, retries; + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + /* Three byte write cycle */ + for (retries = OV511_I2C_RETRIES; ; ) { + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_3, reg); + if (rc < 0) + break; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(ov, R51x_I2C_DATA, value); + if (rc < 0) + break; + + /* Initiate 3-byte write cycle */ + rc = reg_w(ov, R511_I2C_CTL, 0x01); + if (rc < 0) + break; + + /* Retry until idle */ + do + rc = reg_r(ov, R511_I2C_CTL); + while (rc > 0 && ((rc&1) == 0)); + if (rc < 0) + break; + + /* Ack? */ + if ((rc&2) == 0) { + rc = 0; + break; + } +#if 0 + /* I2C abort */ + reg_w(ov, R511_I2C_CTL, 0x10); +#endif + if (--retries < 0) { + err("i2c write retries exhausted"); + rc = -1; + break; + } + } + + return rc; +} + +/* NOTE: Do not call this function directly! + * The OV518 I2C I/O procedure is different, hence, this function. + * This is normally only called from i2c_r(). Note that this function + * always succeeds regardless of whether the sensor is present and working. + */ +static int +ov518_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) +{ + int rc, value; + + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(ov, R518_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + /* Initiate 2-byte read cycle */ + rc = reg_w(ov, R518_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + value = reg_r(ov, R51x_I2C_DATA); + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + return value; +} + +/* NOTE: Do not call this function directly! + * returns: negative is error, pos or zero is data */ +static int +ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = OV511_I2C_RETRIES; ; ) { + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(ov, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + /* Retry until idle */ + do + rc = reg_r(ov, R511_I2C_CTL); + while (rc > 0 && ((rc&1) == 0)); + if (rc < 0) + return rc; + + if ((rc&2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(ov, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + err("i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = OV511_I2C_RETRIES; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(ov, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + /* Retry until idle */ + do + rc = reg_r(ov, R511_I2C_CTL); + while (rc > 0 && ((rc&1) == 0)); + if (rc < 0) + return rc; + + if ((rc&2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(ov, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + err("i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(ov, R51x_I2C_DATA); + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(ov, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} + +/* returns: negative is error, pos or zero is data */ +static int +i2c_r(struct usb_ov511 *ov, unsigned char reg) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_read_internal(ov, reg); + else + rc = ov511_i2c_read_internal(ov, reg); + + mutex_unlock(&ov->i2c_lock); + + return rc; +} + +static int +i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_write_internal(ov, reg, value); + else + rc = ov511_i2c_write_internal(ov, reg, value); + + mutex_unlock(&ov->i2c_lock); + + return rc; +} + +/* Do not call this function directly! */ +static int +ov51x_i2c_write_mask_internal(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int rc; + unsigned char oldval, newval; + + if (mask == 0xff) { + newval = value; + } else { + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_read_internal(ov, reg); + else + rc = ov511_i2c_read_internal(ov, reg); + if (rc < 0) + return rc; + + oldval = (unsigned char) rc; + oldval &= (~mask); /* Clear the masked bits */ + value &= mask; /* Enforce mask on value */ + newval = oldval | value; /* Set the desired bits */ + } + + if (ov->bclass == BCL_OV518) + return (ov518_i2c_write_internal(ov, reg, newval)); + else + return (ov511_i2c_write_internal(ov, reg, newval)); +} + +/* Writes bits at positions specified by mask to an I2C reg. Bits that are in + * the same position as 1's in "mask" are cleared and set to "value". Bits + * that are in the same position as 0's in "mask" are preserved, regardless + * of their respective state in "value". + */ +static int +i2c_w_mask(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask); + mutex_unlock(&ov->i2c_lock); + + return rc; +} + +/* Set the read and write slave IDs. The "slave" argument is the write slave, + * and the read slave will be set to (slave + 1). ov->i2c_lock should be held + * when calling this. This should not be called from outside the i2c I/O + * functions. + */ +static int +i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave) +{ + int rc; + + rc = reg_w(ov, R51x_I2C_W_SID, slave); + if (rc < 0) + return rc; + + rc = reg_w(ov, R51x_I2C_R_SID, slave + 1); + if (rc < 0) + return rc; + + return 0; +} + +/* Write to a specific I2C slave ID and register, using the specified mask */ +static int +i2c_w_slave(struct usb_ov511 *ov, + unsigned char slave, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int rc = 0; + + mutex_lock(&ov->i2c_lock); + + /* Set new slave IDs */ + rc = i2c_set_slave_internal(ov, slave); + if (rc < 0) + goto out; + + rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask); + +out: + /* Restore primary IDs */ + if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0) + err("Couldn't restore primary I2C slave"); + + mutex_unlock(&ov->i2c_lock); + return rc; +} + +/* Read from a specific I2C slave ID and register */ +static int +i2c_r_slave(struct usb_ov511 *ov, + unsigned char slave, + unsigned char reg) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + /* Set new slave IDs */ + rc = i2c_set_slave_internal(ov, slave); + if (rc < 0) + goto out; + + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_read_internal(ov, reg); + else + rc = ov511_i2c_read_internal(ov, reg); + +out: + /* Restore primary IDs */ + if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0) + err("Couldn't restore primary I2C slave"); + + mutex_unlock(&ov->i2c_lock); + return rc; +} + +/* Sets I2C read and write slave IDs. Returns <0 for error */ +static int +ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + rc = i2c_set_slave_internal(ov, sid); + if (rc < 0) + goto out; + + // FIXME: Is this actually necessary? + rc = ov51x_reset(ov, OV511_RESET_NOREGS); +out: + mutex_unlock(&ov->i2c_lock); + return rc; +} + +static int +write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals) +{ + int rc; + + while (pRegvals->bus != OV511_DONE_BUS) { + if (pRegvals->bus == OV511_REG_BUS) { + if ((rc = reg_w(ov, pRegvals->reg, pRegvals->val)) < 0) + return rc; + } else if (pRegvals->bus == OV511_I2C_BUS) { + if ((rc = i2c_w(ov, pRegvals->reg, pRegvals->val)) < 0) + return rc; + } else { + err("Bad regval array"); + return -1; + } + pRegvals++; + } + return 0; +} + +#ifdef OV511_DEBUG +static void +dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn) +{ + int i, rc; + + for (i = reg1; i <= regn; i++) { + rc = i2c_r(ov, i); + info("Sensor[0x%02X] = 0x%02X", i, rc); + } +} + +static void +dump_i2c_regs(struct usb_ov511 *ov) +{ + info("I2C REGS"); + dump_i2c_range(ov, 0x00, 0x7C); +} + +static void +dump_reg_range(struct usb_ov511 *ov, int reg1, int regn) +{ + int i, rc; + + for (i = reg1; i <= regn; i++) { + rc = reg_r(ov, i); + info("OV511[0x%02X] = 0x%02X", i, rc); + } +} + +static void +ov511_dump_regs(struct usb_ov511 *ov) +{ + info("CAMERA INTERFACE REGS"); + dump_reg_range(ov, 0x10, 0x1f); + info("DRAM INTERFACE REGS"); + dump_reg_range(ov, 0x20, 0x23); + info("ISO FIFO REGS"); + dump_reg_range(ov, 0x30, 0x31); + info("PIO REGS"); + dump_reg_range(ov, 0x38, 0x39); + dump_reg_range(ov, 0x3e, 0x3e); + info("I2C REGS"); + dump_reg_range(ov, 0x40, 0x49); + info("SYSTEM CONTROL REGS"); + dump_reg_range(ov, 0x50, 0x55); + dump_reg_range(ov, 0x5e, 0x5f); + info("OmniCE REGS"); + dump_reg_range(ov, 0x70, 0x79); + /* NOTE: Quantization tables are not readable. You will get the value + * in reg. 0x79 for every table register */ + dump_reg_range(ov, 0x80, 0x9f); + dump_reg_range(ov, 0xa0, 0xbf); + +} + +static void +ov518_dump_regs(struct usb_ov511 *ov) +{ + info("VIDEO MODE REGS"); + dump_reg_range(ov, 0x20, 0x2f); + info("DATA PUMP AND SNAPSHOT REGS"); + dump_reg_range(ov, 0x30, 0x3f); + info("I2C REGS"); + dump_reg_range(ov, 0x40, 0x4f); + info("SYSTEM CONTROL AND VENDOR REGS"); + dump_reg_range(ov, 0x50, 0x5f); + info("60 - 6F"); + dump_reg_range(ov, 0x60, 0x6f); + info("70 - 7F"); + dump_reg_range(ov, 0x70, 0x7f); + info("Y QUANTIZATION TABLE"); + dump_reg_range(ov, 0x80, 0x8f); + info("UV QUANTIZATION TABLE"); + dump_reg_range(ov, 0x90, 0x9f); + info("A0 - BF"); + dump_reg_range(ov, 0xa0, 0xbf); + info("CBR"); + dump_reg_range(ov, 0xc0, 0xcf); +} +#endif + +/*****************************************************************************/ + +/* Temporarily stops OV511 from functioning. Must do this before changing + * registers while the camera is streaming */ +static inline int +ov51x_stop(struct usb_ov511 *ov) +{ + PDEBUG(4, "stopping"); + ov->stopped = 1; + if (ov->bclass == BCL_OV518) + return (reg_w_mask(ov, R51x_SYS_RESET, 0x3a, 0x3a)); + else + return (reg_w(ov, R51x_SYS_RESET, 0x3d)); +} + +/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not + * actually stopped (for performance). */ +static inline int +ov51x_restart(struct usb_ov511 *ov) +{ + if (ov->stopped) { + PDEBUG(4, "restarting"); + ov->stopped = 0; + + /* Reinitialize the stream */ + if (ov->bclass == BCL_OV518) + reg_w(ov, 0x2f, 0x80); + + return (reg_w(ov, R51x_SYS_RESET, 0x00)); + } + + return 0; +} + +/* Sleeps until no frames are active. Returns !0 if got signal */ +static int +ov51x_wait_frames_inactive(struct usb_ov511 *ov) +{ + return wait_event_interruptible(ov->wq, ov->curframe < 0); +} + +/* Resets the hardware snapshot button */ +static void +ov51x_clear_snapshot(struct usb_ov511 *ov) +{ + if (ov->bclass == BCL_OV511) { + reg_w(ov, R51x_SYS_SNAP, 0x00); + reg_w(ov, R51x_SYS_SNAP, 0x02); + reg_w(ov, R51x_SYS_SNAP, 0x00); + } else if (ov->bclass == BCL_OV518) { + warn("snapshot reset not supported yet on OV518(+)"); + } else { + err("clear snap: invalid bridge type"); + } +} + +#if 0 +/* Checks the status of the snapshot button. Returns 1 if it was pressed since + * it was last cleared, and zero in all other cases (including errors) */ +static int +ov51x_check_snapshot(struct usb_ov511 *ov) +{ + int ret, status = 0; + + if (ov->bclass == BCL_OV511) { + ret = reg_r(ov, R51x_SYS_SNAP); + if (ret < 0) { + err("Error checking snspshot status (%d)", ret); + } else if (ret & 0x08) { + status = 1; + } + } else if (ov->bclass == BCL_OV518) { + warn("snapshot check not supported yet on OV518(+)"); + } else { + err("check snap: invalid bridge type"); + } + + return status; +} +#endif + +/* This does an initial reset of an OmniVision sensor and ensures that I2C + * is synchronized. Returns <0 for failure. + */ +static int +init_ov_sensor(struct usb_ov511 *ov) +{ + int i, success; + + /* Reset the sensor */ + if (i2c_w(ov, 0x12, 0x80) < 0) + return -EIO; + + /* Wait for it to initialize */ + msleep(150); + + for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) { + if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) && + (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) { + success = 1; + continue; + } + + /* Reset the sensor */ + if (i2c_w(ov, 0x12, 0x80) < 0) + return -EIO; + /* Wait for it to initialize */ + msleep(150); + /* Dummy read to sync I2C */ + if (i2c_r(ov, 0x00) < 0) + return -EIO; + } + + if (!success) + return -EIO; + + PDEBUG(1, "I2C synced in %d attempt(s)", i); + + return 0; +} + +static int +ov511_set_packet_size(struct usb_ov511 *ov, int size) +{ + int alt, mult; + + if (ov51x_stop(ov) < 0) + return -EIO; + + mult = size >> 5; + + if (ov->bridge == BRG_OV511) { + if (size == 0) + alt = OV511_ALT_SIZE_0; + else if (size == 257) + alt = OV511_ALT_SIZE_257; + else if (size == 513) + alt = OV511_ALT_SIZE_513; + else if (size == 769) + alt = OV511_ALT_SIZE_769; + else if (size == 993) + alt = OV511_ALT_SIZE_993; + else { + err("Set packet size: invalid size (%d)", size); + return -EINVAL; + } + } else if (ov->bridge == BRG_OV511PLUS) { + if (size == 0) + alt = OV511PLUS_ALT_SIZE_0; + else if (size == 33) + alt = OV511PLUS_ALT_SIZE_33; + else if (size == 129) + alt = OV511PLUS_ALT_SIZE_129; + else if (size == 257) + alt = OV511PLUS_ALT_SIZE_257; + else if (size == 385) + alt = OV511PLUS_ALT_SIZE_385; + else if (size == 513) + alt = OV511PLUS_ALT_SIZE_513; + else if (size == 769) + alt = OV511PLUS_ALT_SIZE_769; + else if (size == 961) + alt = OV511PLUS_ALT_SIZE_961; + else { + err("Set packet size: invalid size (%d)", size); + return -EINVAL; + } + } else { + err("Set packet size: Invalid bridge type"); + return -EINVAL; + } + + PDEBUG(3, "%d, mult=%d, alt=%d", size, mult, alt); + + if (reg_w(ov, R51x_FIFO_PSIZE, mult) < 0) + return -EIO; + + if (usb_set_interface(ov->dev, ov->iface, alt) < 0) { + err("Set packet size: set interface error"); + return -EBUSY; + } + + if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) + return -EIO; + + ov->packet_size = size; + + if (ov51x_restart(ov) < 0) + return -EIO; + + return 0; +} + +/* Note: Unlike the OV511/OV511+, the size argument does NOT include the + * optional packet number byte. The actual size *is* stored in ov->packet_size, + * though. */ +static int +ov518_set_packet_size(struct usb_ov511 *ov, int size) +{ + int alt; + + if (ov51x_stop(ov) < 0) + return -EIO; + + if (ov->bclass == BCL_OV518) { + if (size == 0) + alt = OV518_ALT_SIZE_0; + else if (size == 128) + alt = OV518_ALT_SIZE_128; + else if (size == 256) + alt = OV518_ALT_SIZE_256; + else if (size == 384) + alt = OV518_ALT_SIZE_384; + else if (size == 512) + alt = OV518_ALT_SIZE_512; + else if (size == 640) + alt = OV518_ALT_SIZE_640; + else if (size == 768) + alt = OV518_ALT_SIZE_768; + else if (size == 896) + alt = OV518_ALT_SIZE_896; + else { + err("Set packet size: invalid size (%d)", size); + return -EINVAL; + } + } else { + err("Set packet size: Invalid bridge type"); + return -EINVAL; + } + + PDEBUG(3, "%d, alt=%d", size, alt); + + ov->packet_size = size; + if (size > 0) { + /* Program ISO FIFO size reg (packet number isn't included) */ + ov518_reg_w32(ov, 0x30, size, 2); + + if (ov->packet_numbering) + ++ov->packet_size; + } + + if (usb_set_interface(ov->dev, ov->iface, alt) < 0) { + err("Set packet size: set interface error"); + return -EBUSY; + } + + /* Initialize the stream */ + if (reg_w(ov, 0x2f, 0x80) < 0) + return -EIO; + + if (ov51x_restart(ov) < 0) + return -EIO; + + if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) + return -EIO; + + return 0; +} + +/* Upload compression params and quantization tables. Returns 0 for success. */ +static int +ov511_init_compression(struct usb_ov511 *ov) +{ + int rc = 0; + + if (!ov->compress_inited) { + reg_w(ov, 0x70, phy); + reg_w(ov, 0x71, phuv); + reg_w(ov, 0x72, pvy); + reg_w(ov, 0x73, pvuv); + reg_w(ov, 0x74, qhy); + reg_w(ov, 0x75, qhuv); + reg_w(ov, 0x76, qvy); + reg_w(ov, 0x77, qvuv); + + if (ov511_upload_quan_tables(ov) < 0) { + err("Error uploading quantization tables"); + rc = -EIO; + goto out; + } + } + + ov->compress_inited = 1; +out: + return rc; +} + +/* Upload compression params and quantization tables. Returns 0 for success. */ +static int +ov518_init_compression(struct usb_ov511 *ov) +{ + int rc = 0; + + if (!ov->compress_inited) { + if (ov518_upload_quan_tables(ov) < 0) { + err("Error uploading quantization tables"); + rc = -EIO; + goto out; + } + } + + ov->compress_inited = 1; +out: + return rc; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's contrast setting to "val" */ +static int +sensor_set_contrast(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + { + rc = i2c_w(ov, OV7610_REG_CNT, val >> 8); + if (rc < 0) + goto out; + break; + } + case SEN_OV6630: + { + rc = i2c_w_mask(ov, OV7610_REG_CNT, val >> 12, 0x0f); + if (rc < 0) + goto out; + break; + } + case SEN_OV7620: + { + unsigned char ctab[] = { + 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, + 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff + }; + + /* Use Y gamma control instead. Bit 0 enables it. */ + rc = i2c_w(ov, 0x64, ctab[val>>12]); + if (rc < 0) + goto out; + break; + } + case SEN_SAA7111A: + { + rc = i2c_w(ov, 0x0b, val >> 9); + if (rc < 0) + goto out; + break; + } + default: + { + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + } + + rc = 0; /* Success */ + ov->contrast = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's contrast setting */ +static int +sensor_get_contrast(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + rc = i2c_r(ov, OV7610_REG_CNT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_CNT); + if (rc < 0) + return rc; + else + *val = rc << 12; + break; + case SEN_OV7620: + /* Use Y gamma reg instead. Bit 0 is the enable bit. */ + rc = i2c_r(ov, 0x64); + if (rc < 0) + return rc; + else + *val = (rc & 0xfe) << 8; + break; + case SEN_SAA7111A: + *val = ov->contrast; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->contrast = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's brightness setting to "val" */ +static int +sensor_set_brightness(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(4, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_w(ov, OV7610_REG_BRT, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_OV7620: + /* 7620 doesn't like manual changes when in auto mode */ + if (!ov->auto_brt) { + rc = i2c_w(ov, OV7610_REG_BRT, val >> 8); + if (rc < 0) + goto out; + } + break; + case SEN_SAA7111A: + rc = i2c_w(ov, 0x0a, val >> 8); + if (rc < 0) + goto out; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + + rc = 0; /* Success */ + ov->brightness = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's brightness setting */ +static int +sensor_get_brightness(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV7620: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_BRT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_SAA7111A: + *val = ov->brightness; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->brightness = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's saturation (color intensity) setting to "val" */ +static int +sensor_set_saturation(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_w(ov, OV7610_REG_SAT, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_OV7620: +// /* Use UV gamma control instead. Bits 0 & 7 are reserved. */ +// rc = ov_i2c_write(ov->dev, 0x62, (val >> 9) & 0x7e); +// if (rc < 0) +// goto out; + rc = i2c_w(ov, OV7610_REG_SAT, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_SAA7111A: + rc = i2c_w(ov, 0x0c, val >> 9); + if (rc < 0) + goto out; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + + rc = 0; /* Success */ + ov->colour = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's saturation (color intensity) setting */ +static int +sensor_get_saturation(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_SAT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_OV7620: +// /* Use UV gamma reg instead. Bits 0 & 7 are reserved. */ +// rc = i2c_r(ov, 0x62); +// if (rc < 0) +// return rc; +// else +// *val = (rc & 0x7e) << 9; + rc = i2c_r(ov, OV7610_REG_SAT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_SAA7111A: + *val = ov->colour; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->colour = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's hue (red/blue balance) setting to "val" */ +static int +sensor_set_hue(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_w(ov, OV7610_REG_RED, 0xFF - (val >> 8)); + if (rc < 0) + goto out; + + rc = i2c_w(ov, OV7610_REG_BLUE, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_OV7620: +// Hue control is causing problems. I will enable it once it's fixed. +#if 0 + rc = i2c_w(ov, 0x7a, (unsigned char)(val >> 8) + 0xb); + if (rc < 0) + goto out; + + rc = i2c_w(ov, 0x79, (unsigned char)(val >> 8) + 0xb); + if (rc < 0) + goto out; +#endif + break; + case SEN_SAA7111A: + rc = i2c_w(ov, 0x0d, (val + 32768) >> 8); + if (rc < 0) + goto out; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + + rc = 0; /* Success */ + ov->hue = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's hue (red/blue balance) setting */ +static int +sensor_get_hue(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_BLUE); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_OV7620: + rc = i2c_r(ov, 0x7a); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_SAA7111A: + *val = ov->hue; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->hue = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static int +sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p) +{ + int rc; + + PDEBUG(4, "sensor_set_picture"); + + ov->whiteness = p->whiteness; + + /* Don't return error if a setting is unsupported, or rest of settings + * will not be performed */ + + rc = sensor_set_contrast(ov, p->contrast); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_brightness(ov, p->brightness); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_saturation(ov, p->colour); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_hue(ov, p->hue); + if (FATAL_ERROR(rc)) + return rc; + + return 0; +} + +static int +sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p) +{ + int rc; + + PDEBUG(4, "sensor_get_picture"); + + /* Don't return error if a setting is unsupported, or rest of settings + * will not be performed */ + + rc = sensor_get_contrast(ov, &(p->contrast)); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_get_brightness(ov, &(p->brightness)); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_get_saturation(ov, &(p->colour)); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_get_hue(ov, &(p->hue)); + if (FATAL_ERROR(rc)) + return rc; + + p->whiteness = 105 << 8; + + return 0; +} + +#if 0 +// FIXME: Exposure range is only 0x00-0x7f in interlace mode +/* Sets current exposure for sensor. This only has an effect if auto-exposure + * is off */ +static inline int +sensor_set_exposure(struct usb_ov511 *ov, unsigned char val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV6620: + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + rc = i2c_w(ov, 0x10, val); + if (rc < 0) + goto out; + + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_exposure"); + return -EINVAL; + } + + rc = 0; /* Success */ + ov->exposure = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} +#endif + +/* Gets current exposure level from sensor, regardless of whether it is under + * manual control. */ +static int +sensor_get_exposure(struct usb_ov511 *ov, unsigned char *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + case SEN_OV6630: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + rc = i2c_r(ov, 0x10); + if (rc < 0) + return rc; + else + *val = rc; + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + val = NULL; + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for get_exposure"); + return -EINVAL; + } + + PDEBUG(3, "%d", *val); + ov->exposure = *val; + + return 0; +} + +/* Turns on or off the LED. Only has an effect with OV511+/OV518(+) */ +static void +ov51x_led_control(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + if (ov->bridge == BRG_OV511PLUS) + reg_w(ov, R511_SYS_LED_CTL, enable ? 1 : 0); + else if (ov->bclass == BCL_OV518) + reg_w_mask(ov, R518_GPIO_OUT, enable ? 0x02 : 0x00, 0x02); + + return; +} + +/* Matches the sensor's internal frame rate to the lighting frequency. + * Valid frequencies are: + * 50 - 50Hz, for European and Asian lighting + * 60 - 60Hz, for American lighting + * + * Tested with: OV7610, OV7620, OV76BE, OV6620 + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_light_freq(struct usb_ov511 *ov, int freq) +{ + int sixty; + + PDEBUG(4, "%d Hz", freq); + + if (freq == 60) + sixty = 1; + else if (freq == 50) + sixty = 0; + else { + err("Invalid light freq (%d Hz)", freq); + return -EINVAL; + } + + switch (ov->sensor) { + case SEN_OV7610: + i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80); + i2c_w(ov, 0x2b, sixty?0x00:0xac); + i2c_w_mask(ov, 0x13, 0x10, 0x10); + i2c_w_mask(ov, 0x13, 0x00, 0x10); + break; + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80); + i2c_w(ov, 0x2b, sixty?0x00:0xac); + i2c_w_mask(ov, 0x76, 0x01, 0x01); + break; + case SEN_OV6620: + case SEN_OV6630: + i2c_w(ov, 0x2b, sixty?0xa8:0x28); + i2c_w(ov, 0x2a, sixty?0x84:0xa4); + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_light_freq"); + return -EINVAL; + } + + ov->lightfreq = freq; + + return 0; +} + +/* If enable is true, turn on the sensor's banding filter, otherwise turn it + * off. This filter tries to reduce the pattern of horizontal light/dark bands + * caused by some (usually fluorescent) lighting. The light frequency must be + * set either before or after enabling it with ov51x_set_light_freq(). + * + * Tested with: OV7610, OV7620, OV76BE, OV6620. + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_banding_filter(struct usb_ov511 *ov, int enable) +{ + int rc; + + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B + || ov->sensor == SEN_SAA7111A) { + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + } + + rc = i2c_w_mask(ov, 0x2d, enable?0x04:0x00, 0x04); + if (rc < 0) + return rc; + + ov->bandfilt = enable; + + return 0; +} + +/* If enable is true, turn on the sensor's auto brightness control, otherwise + * turn it off. + * + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_auto_brightness(struct usb_ov511 *ov, int enable) +{ + int rc; + + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B + || ov->sensor == SEN_SAA7111A) { + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + } + + rc = i2c_w_mask(ov, 0x2d, enable?0x10:0x00, 0x10); + if (rc < 0) + return rc; + + ov->auto_brt = enable; + + return 0; +} + +/* If enable is true, turn on the sensor's auto exposure control, otherwise + * turn it off. + * + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_auto_exposure(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + switch (ov->sensor) { + case SEN_OV7610: + i2c_w_mask(ov, 0x29, enable?0x00:0x80, 0x80); + break; + case SEN_OV6620: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + i2c_w_mask(ov, 0x13, enable?0x01:0x00, 0x01); + break; + case SEN_OV6630: + i2c_w_mask(ov, 0x28, enable?0x00:0x10, 0x10); + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_auto_exposure"); + return -EINVAL; + } + + ov->auto_exp = enable; + + return 0; +} + +/* Modifies the sensor's exposure algorithm to allow proper exposure of objects + * that are illuminated from behind. + * + * Tested with: OV6620, OV7620 + * Unsupported: OV7610, OV76BE, KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_backlight(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + switch (ov->sensor) { + case SEN_OV7620: + case SEN_OV8600: + i2c_w_mask(ov, 0x68, enable?0xe0:0xc0, 0xe0); + i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); + i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02); + break; + case SEN_OV6620: + i2c_w_mask(ov, 0x4e, enable?0xe0:0xc0, 0xe0); + i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); + i2c_w_mask(ov, 0x0e, enable?0x80:0x00, 0x80); + break; + case SEN_OV6630: + i2c_w_mask(ov, 0x4e, enable?0x80:0x60, 0xe0); + i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); + i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02); + break; + case SEN_OV7610: + case SEN_OV76BE: + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_backlight"); + return -EINVAL; + } + + ov->backlight = enable; + + return 0; +} + +static int +sensor_set_mirror(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + switch (ov->sensor) { + case SEN_OV6620: + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + i2c_w_mask(ov, 0x12, enable?0x40:0x00, 0x40); + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_mirror"); + return -EINVAL; + } + + ov->mirror = enable; + + return 0; +} + +/* Returns number of bits per pixel (regardless of where they are located; + * planar or not), or zero for unsupported format. + */ +static inline int +get_depth(int palette) +{ + switch (palette) { + case VIDEO_PALETTE_GREY: return 8; + case VIDEO_PALETTE_YUV420: return 12; + case VIDEO_PALETTE_YUV420P: return 12; /* Planar */ + default: return 0; /* Invalid format */ + } +} + +/* Bytes per frame. Used by read(). Return of 0 indicates error */ +static inline long int +get_frame_length(struct ov511_frame *frame) +{ + if (!frame) + return 0; + else + return ((frame->width * frame->height + * get_depth(frame->format)) >> 3); +} + +static int +mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height, + int mode, int sub_flag, int qvga) +{ + int clock; + + /******** Mode (VGA/QVGA) and sensor specific regs ********/ + + switch (ov->sensor) { + case SEN_OV7610: + i2c_w(ov, 0x14, qvga?0x24:0x04); +// FIXME: Does this improve the image quality or frame rate? +#if 0 + i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); + i2c_w(ov, 0x24, 0x10); + i2c_w(ov, 0x25, qvga?0x40:0x8a); + i2c_w(ov, 0x2f, qvga?0x30:0xb0); + i2c_w(ov, 0x35, qvga?0x1c:0x9c); +#endif + break; + case SEN_OV7620: +// i2c_w(ov, 0x2b, 0x00); + i2c_w(ov, 0x14, qvga?0xa4:0x84); + i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); + i2c_w(ov, 0x24, qvga?0x20:0x3a); + i2c_w(ov, 0x25, qvga?0x30:0x60); + i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40); + i2c_w_mask(ov, 0x67, qvga?0xf0:0x90, 0xf0); + i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20); + break; + case SEN_OV76BE: +// i2c_w(ov, 0x2b, 0x00); + i2c_w(ov, 0x14, qvga?0xa4:0x84); +// FIXME: Enable this once 7620AE uses 7620 initial settings +#if 0 + i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); + i2c_w(ov, 0x24, qvga?0x20:0x3a); + i2c_w(ov, 0x25, qvga?0x30:0x60); + i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40); + i2c_w_mask(ov, 0x67, qvga?0xb0:0x90, 0xf0); + i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20); +#endif + break; + case SEN_OV6620: + i2c_w(ov, 0x14, qvga?0x24:0x04); + break; + case SEN_OV6630: + i2c_w(ov, 0x14, qvga?0xa0:0x80); + break; + default: + err("Invalid sensor"); + return -EINVAL; + } + + /******** Palette-specific regs ********/ + + if (mode == VIDEO_PALETTE_GREY) { + if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { + /* these aren't valid on the OV6620/OV7620/6630? */ + i2c_w_mask(ov, 0x0e, 0x40, 0x40); + } + + if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518 + && ov518_color) { + i2c_w_mask(ov, 0x12, 0x00, 0x10); + i2c_w_mask(ov, 0x13, 0x00, 0x20); + } else { + i2c_w_mask(ov, 0x13, 0x20, 0x20); + } + } else { + if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { + /* not valid on the OV6620/OV7620/6630? */ + i2c_w_mask(ov, 0x0e, 0x00, 0x40); + } + + /* The OV518 needs special treatment. Although both the OV518 + * and the OV6630 support a 16-bit video bus, only the 8 bit Y + * bus is actually used. The UV bus is tied to ground. + * Therefore, the OV6630 needs to be in 8-bit multiplexed + * output mode */ + + if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518 + && ov518_color) { + i2c_w_mask(ov, 0x12, 0x10, 0x10); + i2c_w_mask(ov, 0x13, 0x20, 0x20); + } else { + i2c_w_mask(ov, 0x13, 0x00, 0x20); + } + } + + /******** Clock programming ********/ + + /* The OV6620 needs special handling. This prevents the + * severe banding that normally occurs */ + if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) + { + /* Clock down */ + + i2c_w(ov, 0x2a, 0x04); + + if (ov->compress) { +// clock = 0; /* This ensures the highest frame rate */ + clock = 3; + } else if (clockdiv == -1) { /* If user didn't override it */ + clock = 3; /* Gives better exposure time */ + } else { + clock = clockdiv; + } + + PDEBUG(4, "Setting clock divisor to %d", clock); + + i2c_w(ov, 0x11, clock); + + i2c_w(ov, 0x2a, 0x84); + /* This next setting is critical. It seems to improve + * the gain or the contrast. The "reserved" bits seem + * to have some effect in this case. */ + i2c_w(ov, 0x2d, 0x85); + } + else + { + if (ov->compress) { + clock = 1; /* This ensures the highest frame rate */ + } else if (clockdiv == -1) { /* If user didn't override it */ + /* Calculate and set the clock divisor */ + clock = ((sub_flag ? ov->subw * ov->subh + : width * height) + * (mode == VIDEO_PALETTE_GREY ? 2 : 3) / 2) + / 66000; + } else { + clock = clockdiv; + } + + PDEBUG(4, "Setting clock divisor to %d", clock); + + i2c_w(ov, 0x11, clock); + } + + /******** Special Features ********/ + + if (framedrop >= 0) + i2c_w(ov, 0x16, framedrop); + + /* Test Pattern */ + i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02); + + /* Enable auto white balance */ + i2c_w_mask(ov, 0x12, 0x04, 0x04); + + // This will go away as soon as ov51x_mode_init_sensor_regs() + // is fully tested. + /* 7620/6620/6630? don't have register 0x35, so play it safe */ + if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { + if (width == 640 && height == 480) + i2c_w(ov, 0x35, 0x9e); + else + i2c_w(ov, 0x35, 0x1e); + } + + return 0; +} + +static int +set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode, + int sub_flag) +{ + int ret; + int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize; + int hoffset, voffset, hwscale = 0, vwscale = 0; + + /* The different sensor ICs handle setting up of window differently. + * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!!! */ + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + hwsbase = 0x38; + hwebase = 0x3a; + vwsbase = vwebase = 0x05; + break; + case SEN_OV6620: + case SEN_OV6630: + hwsbase = 0x38; + hwebase = 0x3a; + vwsbase = 0x05; + vwebase = 0x06; + break; + case SEN_OV7620: + hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */ + hwebase = 0x2f; + vwsbase = vwebase = 0x05; + break; + default: + err("Invalid sensor"); + return -EINVAL; + } + + if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) { + /* Note: OV518(+) does downsample on its own) */ + if ((width > 176 && height > 144) + || ov->bclass == BCL_OV518) { /* CIF */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 0); + if (ret < 0) + return ret; + hwscale = 1; + vwscale = 1; /* The datasheet says 0; it's wrong */ + hwsize = 352; + vwsize = 288; + } else if (width > 176 || height > 144) { + err("Illegal dimensions"); + return -EINVAL; + } else { /* QCIF */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 1); + if (ret < 0) + return ret; + hwsize = 176; + vwsize = 144; + } + } else { + if (width > 320 && height > 240) { /* VGA */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 0); + if (ret < 0) + return ret; + hwscale = 2; + vwscale = 1; + hwsize = 640; + vwsize = 480; + } else if (width > 320 || height > 240) { + err("Illegal dimensions"); + return -EINVAL; + } else { /* QVGA */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 1); + if (ret < 0) + return ret; + hwscale = 1; + hwsize = 320; + vwsize = 240; + } + } + + /* Center the window */ + hoffset = ((hwsize - width) / 2) >> hwscale; + voffset = ((vwsize - height) / 2) >> vwscale; + + /* FIXME! - This needs to be changed to support 160x120 and 6620!!! */ + if (sub_flag) { + i2c_w(ov, 0x17, hwsbase+(ov->subx>>hwscale)); + i2c_w(ov, 0x18, hwebase+((ov->subx+ov->subw)>>hwscale)); + i2c_w(ov, 0x19, vwsbase+(ov->suby>>vwscale)); + i2c_w(ov, 0x1a, vwebase+((ov->suby+ov->subh)>>vwscale)); + } else { + i2c_w(ov, 0x17, hwsbase + hoffset); + i2c_w(ov, 0x18, hwebase + hoffset + (hwsize>>hwscale)); + i2c_w(ov, 0x19, vwsbase + voffset); + i2c_w(ov, 0x1a, vwebase + voffset + (vwsize>>vwscale)); + } + +#ifdef OV511_DEBUG + if (dump_sensor) + dump_i2c_regs(ov); +#endif + + return 0; +} + +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int +ov511_mode_init_regs(struct usb_ov511 *ov, + int width, int height, int mode, int sub_flag) +{ + int hsegs, vsegs; + + if (sub_flag) { + width = ov->subw; + height = ov->subh; + } + + PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d", + width, height, mode, sub_flag); + + // FIXME: This should be moved to a 7111a-specific function once + // subcapture is dealt with properly + if (ov->sensor == SEN_SAA7111A) { + if (width == 320 && height == 240) { + /* No need to do anything special */ + } else if (width == 640 && height == 480) { + /* Set the OV511 up as 320x480, but keep the + * V4L resolution as 640x480 */ + width = 320; + } else { + err("SAA7111A only allows 320x240 or 640x480"); + return -EINVAL; + } + } + + /* Make sure width and height are a multiple of 8 */ + if (width % 8 || height % 8) { + err("Invalid size (%d, %d) (mode = %d)", width, height, mode); + return -EINVAL; + } + + if (width < ov->minwidth || height < ov->minheight) { + err("Requested dimensions are too small"); + return -EINVAL; + } + + if (ov51x_stop(ov) < 0) + return -EIO; + + if (mode == VIDEO_PALETTE_GREY) { + reg_w(ov, R511_CAM_UV_EN, 0x00); + reg_w(ov, R511_SNAP_UV_EN, 0x00); + reg_w(ov, R511_SNAP_OPTS, 0x01); + } else { + reg_w(ov, R511_CAM_UV_EN, 0x01); + reg_w(ov, R511_SNAP_UV_EN, 0x01); + reg_w(ov, R511_SNAP_OPTS, 0x03); + } + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (width >> 3) - 1; + vsegs = (height >> 3) - 1; + + reg_w(ov, R511_CAM_PXCNT, hsegs); + reg_w(ov, R511_CAM_LNCNT, vsegs); + reg_w(ov, R511_CAM_PXDIV, 0x00); + reg_w(ov, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(ov, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(ov, R511_SNAP_PXCNT, hsegs); + reg_w(ov, R511_SNAP_LNCNT, vsegs); + reg_w(ov, R511_SNAP_PXDIV, 0x00); + reg_w(ov, R511_SNAP_LNDIV, 0x00); + + if (ov->compress) { + /* Enable Y and UV quantization and compression */ + reg_w(ov, R511_COMP_EN, 0x07); + reg_w(ov, R511_COMP_LUT_EN, 0x03); + ov51x_reset(ov, OV511_RESET_OMNICE); + } + + if (ov51x_restart(ov) < 0) + return -EIO; + + return 0; +} + +/* Sets up the OV518/OV518+ with the given image parameters + * + * OV518 needs a completely different approach, until we can figure out what + * the individual registers do. Also, only 15 FPS is supported now. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int +ov518_mode_init_regs(struct usb_ov511 *ov, + int width, int height, int mode, int sub_flag) +{ + int hsegs, vsegs, hi_res; + + if (sub_flag) { + width = ov->subw; + height = ov->subh; + } + + PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d", + width, height, mode, sub_flag); + + if (width % 16 || height % 8) { + err("Invalid size (%d, %d)", width, height); + return -EINVAL; + } + + if (width < ov->minwidth || height < ov->minheight) { + err("Requested dimensions are too small"); + return -EINVAL; + } + + if (width >= 320 && height >= 240) { + hi_res = 1; + } else if (width >= 320 || height >= 240) { + err("Invalid width/height combination (%d, %d)", width, height); + return -EINVAL; + } else { + hi_res = 0; + } + + if (ov51x_stop(ov) < 0) + return -EIO; + + /******** Set the mode ********/ + + reg_w(ov, 0x2b, 0); + reg_w(ov, 0x2c, 0); + reg_w(ov, 0x2d, 0); + reg_w(ov, 0x2e, 0); + reg_w(ov, 0x3b, 0); + reg_w(ov, 0x3c, 0); + reg_w(ov, 0x3d, 0); + reg_w(ov, 0x3e, 0); + + if (ov->bridge == BRG_OV518 && ov518_color) { + /* OV518 needs U and V swapped */ + i2c_w_mask(ov, 0x15, 0x00, 0x01); + + if (mode == VIDEO_PALETTE_GREY) { + /* Set 16-bit input format (UV data are ignored) */ + reg_w_mask(ov, 0x20, 0x00, 0x08); + + /* Set 8-bit (4:0:0) output format */ + reg_w_mask(ov, 0x28, 0x00, 0xf0); + reg_w_mask(ov, 0x38, 0x00, 0xf0); + } else { + /* Set 8-bit (YVYU) input format */ + reg_w_mask(ov, 0x20, 0x08, 0x08); + + /* Set 12-bit (4:2:0) output format */ + reg_w_mask(ov, 0x28, 0x80, 0xf0); + reg_w_mask(ov, 0x38, 0x80, 0xf0); + } + } else { + reg_w(ov, 0x28, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80); + reg_w(ov, 0x38, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80); + } + + hsegs = width / 16; + vsegs = height / 4; + + reg_w(ov, 0x29, hsegs); + reg_w(ov, 0x2a, vsegs); + + reg_w(ov, 0x39, hsegs); + reg_w(ov, 0x3a, vsegs); + + /* Windows driver does this here; who knows why */ + reg_w(ov, 0x2f, 0x80); + + /******** Set the framerate (to 15 FPS) ********/ + + /* Mode independent, but framerate dependent, regs */ + reg_w(ov, 0x51, 0x02); /* Clock divider; lower==faster */ + reg_w(ov, 0x22, 0x18); + reg_w(ov, 0x23, 0xff); + + if (ov->bridge == BRG_OV518PLUS) + reg_w(ov, 0x21, 0x19); + else + reg_w(ov, 0x71, 0x19); /* Compression-related? */ + + // FIXME: Sensor-specific + /* Bit 5 is what matters here. Of course, it is "reserved" */ + i2c_w(ov, 0x54, 0x23); + + reg_w(ov, 0x2f, 0x80); + + if (ov->bridge == BRG_OV518PLUS) { + reg_w(ov, 0x24, 0x94); + reg_w(ov, 0x25, 0x90); + ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(ov, 0xc6, 540, 2); /* 21ch */ + ov518_reg_w32(ov, 0xc7, 540, 2); /* 21ch */ + ov518_reg_w32(ov, 0xc8, 108, 2); /* 6ch */ + ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */ + ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */ + ov518_reg_w32(ov, 0xcc, 2400, 2); /* 960h */ + ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */ + ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */ + } else { + reg_w(ov, 0x24, 0x9f); + reg_w(ov, 0x25, 0x90); + ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(ov, 0xc6, 500, 2); /* 1f4h */ + ov518_reg_w32(ov, 0xc7, 500, 2); /* 1f4h */ + ov518_reg_w32(ov, 0xc8, 142, 2); /* 8eh */ + ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */ + ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */ + ov518_reg_w32(ov, 0xcc, 2000, 2); /* 7d0h */ + ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */ + ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */ + } + + reg_w(ov, 0x2f, 0x80); + + if (ov51x_restart(ov) < 0) + return -EIO; + + /* Reset it just for good measure */ + if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) + return -EIO; + + return 0; +} + +/* This is a wrapper around the OV511, OV518, and sensor specific functions */ +static int +mode_init_regs(struct usb_ov511 *ov, + int width, int height, int mode, int sub_flag) +{ + int rc = 0; + + if (!ov || !ov->dev) + return -EFAULT; + + if (ov->bclass == BCL_OV518) { + rc = ov518_mode_init_regs(ov, width, height, mode, sub_flag); + } else { + rc = ov511_mode_init_regs(ov, width, height, mode, sub_flag); + } + + if (FATAL_ERROR(rc)) + return rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + case SEN_OV6620: + case SEN_OV6630: + rc = set_ov_sensor_window(ov, width, height, mode, sub_flag); + break; + case SEN_KS0127: + case SEN_KS0127B: + err("KS0127-series decoders not supported yet"); + rc = -EINVAL; + break; + case SEN_SAA7111A: +// rc = mode_init_saa_sensor_regs(ov, width, height, mode, +// sub_flag); + + PDEBUG(1, "SAA status = 0x%02X", i2c_r(ov, 0x1f)); + break; + default: + err("Unknown sensor"); + rc = -EINVAL; + } + + if (FATAL_ERROR(rc)) + return rc; + + /* Sensor-independent settings */ + rc = sensor_set_auto_brightness(ov, ov->auto_brt); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_auto_exposure(ov, ov->auto_exp); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_banding_filter(ov, bandingfilter); + if (FATAL_ERROR(rc)) + return rc; + + if (ov->lightfreq) { + rc = sensor_set_light_freq(ov, lightfreq); + if (FATAL_ERROR(rc)) + return rc; + } + + rc = sensor_set_backlight(ov, ov->backlight); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_mirror(ov, ov->mirror); + if (FATAL_ERROR(rc)) + return rc; + + return 0; +} + +/* This sets the default image parameters. This is useful for apps that use + * read() and do not set these. + */ +static int +ov51x_set_default_params(struct usb_ov511 *ov) +{ + int i; + + /* Set default sizes in case IOCTL (VIDIOCMCAPTURE) is not used + * (using read() instead). */ + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].width = ov->maxwidth; + ov->frame[i].height = ov->maxheight; + ov->frame[i].bytes_read = 0; + if (force_palette) + ov->frame[i].format = force_palette; + else + ov->frame[i].format = VIDEO_PALETTE_YUV420; + + ov->frame[i].depth = get_depth(ov->frame[i].format); + } + + PDEBUG(3, "%dx%d, %s", ov->maxwidth, ov->maxheight, + symbolic(v4l1_plist, ov->frame[0].format)); + + /* Initialize to max width/height, YUV420 or RGB24 (if supported) */ + if (mode_init_regs(ov, ov->maxwidth, ov->maxheight, + ov->frame[0].format, 0) < 0) + return -EINVAL; + + return 0; +} + +/********************************************************************** + * + * Video decoder stuff + * + **********************************************************************/ + +/* Set analog input port of decoder */ +static int +decoder_set_input(struct usb_ov511 *ov, int input) +{ + PDEBUG(4, "port %d", input); + + switch (ov->sensor) { + case SEN_SAA7111A: + { + /* Select mode */ + i2c_w_mask(ov, 0x02, input, 0x07); + /* Bypass chrominance trap for modes 4..7 */ + i2c_w_mask(ov, 0x09, (input > 3) ? 0x80:0x00, 0x80); + break; + } + default: + return -EINVAL; + } + + return 0; +} + +/* Get ASCII name of video input */ +static int +decoder_get_input_name(struct usb_ov511 *ov, int input, char *name) +{ + switch (ov->sensor) { + case SEN_SAA7111A: + { + if (input < 0 || input > 7) + return -EINVAL; + else if (input < 4) + sprintf(name, "CVBS-%d", input); + else // if (input < 8) + sprintf(name, "S-Video-%d", input - 4); + break; + } + default: + sprintf(name, "%s", "Camera"); + } + + return 0; +} + +/* Set norm (NTSC, PAL, SECAM, AUTO) */ +static int +decoder_set_norm(struct usb_ov511 *ov, int norm) +{ + PDEBUG(4, "%d", norm); + + switch (ov->sensor) { + case SEN_SAA7111A: + { + int reg_8, reg_e; + + if (norm == VIDEO_MODE_NTSC) { + reg_8 = 0x40; /* 60 Hz */ + reg_e = 0x00; /* NTSC M / PAL BGHI */ + } else if (norm == VIDEO_MODE_PAL) { + reg_8 = 0x00; /* 50 Hz */ + reg_e = 0x00; /* NTSC M / PAL BGHI */ + } else if (norm == VIDEO_MODE_AUTO) { + reg_8 = 0x80; /* Auto field detect */ + reg_e = 0x00; /* NTSC M / PAL BGHI */ + } else if (norm == VIDEO_MODE_SECAM) { + reg_8 = 0x00; /* 50 Hz */ + reg_e = 0x50; /* SECAM / PAL 4.43 */ + } else { + return -EINVAL; + } + + i2c_w_mask(ov, 0x08, reg_8, 0xc0); + i2c_w_mask(ov, 0x0e, reg_e, 0x70); + break; + } + default: + return -EINVAL; + } + + return 0; +} + +/********************************************************************** + * + * Raw data parsing + * + **********************************************************************/ + +/* Copies a 64-byte segment at pIn to an 8x8 block at pOut. The width of the + * image at pOut is specified by w. + */ +static inline void +make_8x8(unsigned char *pIn, unsigned char *pOut, int w) +{ + unsigned char *pOut1 = pOut; + int x, y; + + for (y = 0; y < 8; y++) { + pOut1 = pOut; + for (x = 0; x < 8; x++) { + *pOut1++ = *pIn++; + } + pOut += w; + } +} + +/* + * For RAW BW (YUV 4:0:0) images, data show up in 256 byte segments. + * The segments represent 4 squares of 8x8 pixels as follows: + * + * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199 + * 8 9 ... 15 72 73 ... 79 200 201 ... 207 + * ... ... ... + * 56 57 ... 63 120 121 ... 127 248 249 ... 255 + * + */ +static void +yuv400raw_to_yuv400p(struct ov511_frame *frame, + unsigned char *pIn0, unsigned char *pOut0) +{ + int x, y; + unsigned char *pIn, *pOut, *pOutLine; + + /* Copy Y */ + pIn = pIn0; + pOutLine = pOut0; + for (y = 0; y < frame->rawheight - 1; y += 8) { + pOut = pOutLine; + for (x = 0; x < frame->rawwidth - 1; x += 8) { + make_8x8(pIn, pOut, frame->rawwidth); + pIn += 64; + pOut += 8; + } + pOutLine += 8 * frame->rawwidth; + } +} + +/* + * For YUV 4:2:0 images, the data show up in 384 byte segments. + * The first 64 bytes of each segment are U, the next 64 are V. The U and + * V are arranged as follows: + * + * 0 1 ... 7 + * 8 9 ... 15 + * ... + * 56 57 ... 63 + * + * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block). + * + * The next 256 bytes are full resolution Y data and represent 4 squares + * of 8x8 pixels as follows: + * + * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199 + * 8 9 ... 15 72 73 ... 79 200 201 ... 207 + * ... ... ... + * 56 57 ... 63 120 121 ... 127 ... 248 249 ... 255 + * + * Note that the U and V data in one segment represent a 16 x 16 pixel + * area, but the Y data represent a 32 x 8 pixel area. If the width is not an + * even multiple of 32, the extra 8x8 blocks within a 32x8 block belong to the + * next horizontal stripe. + * + * If dumppix module param is set, _parse_data just dumps the incoming segments, + * verbatim, in order, into the frame. When used with vidcat -f ppm -s 640x480 + * this puts the data on the standard output and can be analyzed with the + * parseppm.c utility I wrote. That's a much faster way for figuring out how + * these data are scrambled. + */ + +/* Converts from raw, uncompressed segments at pIn0 to a YUV420P frame at pOut0. + * + * FIXME: Currently only handles width and height that are multiples of 16 + */ +static void +yuv420raw_to_yuv420p(struct ov511_frame *frame, + unsigned char *pIn0, unsigned char *pOut0) +{ + int k, x, y; + unsigned char *pIn, *pOut, *pOutLine; + const unsigned int a = frame->rawwidth * frame->rawheight; + const unsigned int w = frame->rawwidth / 2; + + /* Copy U and V */ + pIn = pIn0; + pOutLine = pOut0 + a; + for (y = 0; y < frame->rawheight - 1; y += 16) { + pOut = pOutLine; + for (x = 0; x < frame->rawwidth - 1; x += 16) { + make_8x8(pIn, pOut, w); + make_8x8(pIn + 64, pOut + a/4, w); + pIn += 384; + pOut += 8; + } + pOutLine += 8 * w; + } + + /* Copy Y */ + pIn = pIn0 + 128; + pOutLine = pOut0; + k = 0; + for (y = 0; y < frame->rawheight - 1; y += 8) { + pOut = pOutLine; + for (x = 0; x < frame->rawwidth - 1; x += 8) { + make_8x8(pIn, pOut, frame->rawwidth); + pIn += 64; + pOut += 8; + if ((++k) > 3) { + k = 0; + pIn += 128; + } + } + pOutLine += 8 * frame->rawwidth; + } +} + +/********************************************************************** + * + * Decompression + * + **********************************************************************/ + +static int +request_decompressor(struct usb_ov511 *ov) +{ + if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) { + err("No decompressor available"); + } else { + err("Unknown bridge"); + } + + return -ENOSYS; +} + +static void +decompress(struct usb_ov511 *ov, struct ov511_frame *frame, + unsigned char *pIn0, unsigned char *pOut0) +{ + if (!ov->decomp_ops) + if (request_decompressor(ov)) + return; + +} + +/********************************************************************** + * + * Format conversion + * + **********************************************************************/ + +/* Fuses even and odd fields together, and doubles width. + * INPUT: an odd field followed by an even field at pIn0, in YUV planar format + * OUTPUT: a normal YUV planar image, with correct aspect ratio + */ +static void +deinterlace(struct ov511_frame *frame, int rawformat, + unsigned char *pIn0, unsigned char *pOut0) +{ + const int fieldheight = frame->rawheight / 2; + const int fieldpix = fieldheight * frame->rawwidth; + const int w = frame->width; + int x, y; + unsigned char *pInEven, *pInOdd, *pOut; + + PDEBUG(5, "fieldheight=%d", fieldheight); + + if (frame->rawheight != frame->height) { + err("invalid height"); + return; + } + + if ((frame->rawwidth * 2) != frame->width) { + err("invalid width"); + return; + } + + /* Y */ + pInOdd = pIn0; + pInEven = pInOdd + fieldpix; + pOut = pOut0; + for (y = 0; y < fieldheight; y++) { + for (x = 0; x < frame->rawwidth; x++) { + *pOut = *pInEven; + *(pOut+1) = *pInEven++; + *(pOut+w) = *pInOdd; + *(pOut+w+1) = *pInOdd++; + pOut += 2; + } + pOut += w; + } + + if (rawformat == RAWFMT_YUV420) { + /* U */ + pInOdd = pIn0 + fieldpix * 2; + pInEven = pInOdd + fieldpix / 4; + for (y = 0; y < fieldheight / 2; y++) { + for (x = 0; x < frame->rawwidth / 2; x++) { + *pOut = *pInEven; + *(pOut+1) = *pInEven++; + *(pOut+w/2) = *pInOdd; + *(pOut+w/2+1) = *pInOdd++; + pOut += 2; + } + pOut += w/2; + } + /* V */ + pInOdd = pIn0 + fieldpix * 2 + fieldpix / 2; + pInEven = pInOdd + fieldpix / 4; + for (y = 0; y < fieldheight / 2; y++) { + for (x = 0; x < frame->rawwidth / 2; x++) { + *pOut = *pInEven; + *(pOut+1) = *pInEven++; + *(pOut+w/2) = *pInOdd; + *(pOut+w/2+1) = *pInOdd++; + pOut += 2; + } + pOut += w/2; + } + } +} + +static void +ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame) +{ + /* Deinterlace frame, if necessary */ + if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, + frame->tempdata); + else + yuv400raw_to_yuv400p(frame, frame->rawdata, + frame->tempdata); + + deinterlace(frame, RAWFMT_YUV400, frame->tempdata, + frame->data); + } else { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, + frame->data); + else + yuv400raw_to_yuv400p(frame, frame->rawdata, + frame->data); + } +} + +/* Process raw YUV420 data into standard YUV420P */ +static void +ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame) +{ + /* Deinterlace frame, if necessary */ + if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, frame->tempdata); + else + yuv420raw_to_yuv420p(frame, frame->rawdata, + frame->tempdata); + + deinterlace(frame, RAWFMT_YUV420, frame->tempdata, + frame->data); + } else { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, frame->data); + else + yuv420raw_to_yuv420p(frame, frame->rawdata, + frame->data); + } +} + +/* Post-processes the specified frame. This consists of: + * 1. Decompress frame, if necessary + * 2. Deinterlace frame and scale to proper size, if necessary + * 3. Convert from YUV planar to destination format, if necessary + * 4. Fix the RGB offset, if necessary + */ +static void +ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame) +{ + if (dumppix) { + memset(frame->data, 0, + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)); + PDEBUG(4, "Dumping %d bytes", frame->bytes_recvd); + memcpy(frame->data, frame->rawdata, frame->bytes_recvd); + } else { + switch (frame->format) { + case VIDEO_PALETTE_GREY: + ov51x_postprocess_grey(ov, frame); + break; + case VIDEO_PALETTE_YUV420: + case VIDEO_PALETTE_YUV420P: + ov51x_postprocess_yuv420(ov, frame); + break; + default: + err("Cannot convert data to %s", + symbolic(v4l1_plist, frame->format)); + } + } +} + +/********************************************************************** + * + * OV51x data transfer, IRQ handler + * + **********************************************************************/ + +static inline void +ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n) +{ + int num, offset; + int pnum = in[ov->packet_size - 1]; /* Get packet number */ + int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight); + struct ov511_frame *frame = &ov->frame[ov->curframe]; + struct timeval *ts; + + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + + if (printph) { + info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x", + pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], + in[7], in[8], in[9], in[10], in[11]); + } + + /* Check for SOF/EOF packet */ + if ((in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) || + (~in[8] & 0x08)) + goto check_middle; + + /* Frame end */ + if (in[8] & 0x80) { + ts = (struct timeval *)(frame->data + + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight)); + do_gettimeofday(ts); + + /* Get the actual frame size from the EOF header */ + frame->rawwidth = ((int)(in[9]) + 1) * 8; + frame->rawheight = ((int)(in[10]) + 1) * 8; + + PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d", + ov->curframe, pnum, frame->rawwidth, frame->rawheight, + frame->bytes_recvd); + + /* Validate the header data */ + RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth); + RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, + ov->maxheight); + + /* Don't allow byte count to exceed buffer size */ + RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw); + + if (frame->scanstate == STATE_LINES) { + int nextf; + + frame->grabstate = FRAME_DONE; + wake_up_interruptible(&frame->wq); + + /* If next frame is ready or grabbing, + * point to it */ + nextf = (ov->curframe + 1) % OV511_NUMFRAMES; + if (ov->frame[nextf].grabstate == FRAME_READY + || ov->frame[nextf].grabstate == FRAME_GRABBING) { + ov->curframe = nextf; + ov->frame[nextf].scanstate = STATE_SCANNING; + } else { + if (frame->grabstate == FRAME_DONE) { + PDEBUG(4, "** Frame done **"); + } else { + PDEBUG(4, "Frame not ready? state = %d", + ov->frame[nextf].grabstate); + } + + ov->curframe = -1; + } + } else { + PDEBUG(5, "Frame done, but not scanning"); + } + /* Image corruption caused by misplaced frame->segment = 0 + * fixed by carlosf@conectiva.com.br + */ + } else { + /* Frame start */ + PDEBUG(4, "Frame start, framenum = %d", ov->curframe); + + /* Check to see if it's a snapshot frame */ + /* FIXME?? Should the snapshot reset go here? Performance? */ + if (in[8] & 0x02) { + frame->snapshot = 1; + PDEBUG(3, "snapshot detected"); + } + + frame->scanstate = STATE_LINES; + frame->bytes_recvd = 0; + frame->compressed = in[8] & 0x40; + } + +check_middle: + /* Are we in a frame? */ + if (frame->scanstate != STATE_LINES) { + PDEBUG(5, "Not in a frame; packet skipped"); + return; + } + + /* If frame start, skip header */ + if (frame->bytes_recvd == 0) + offset = 9; + else + offset = 0; + + num = n - offset - 1; + + /* Dump all data exactly as received */ + if (dumppix == 2) { + frame->bytes_recvd += n - 1; + if (frame->bytes_recvd <= max_raw) + memcpy(frame->rawdata + frame->bytes_recvd - (n - 1), + in, n - 1); + else + PDEBUG(3, "Raw data buffer overrun!! (%d)", + frame->bytes_recvd - max_raw); + } else if (!frame->compressed && !remove_zeros) { + frame->bytes_recvd += num; + if (frame->bytes_recvd <= max_raw) + memcpy(frame->rawdata + frame->bytes_recvd - num, + in + offset, num); + else + PDEBUG(3, "Raw data buffer overrun!! (%d)", + frame->bytes_recvd - max_raw); + } else { /* Remove all-zero FIFO lines (aligned 32-byte blocks) */ + int b, read = 0, allzero, copied = 0; + if (offset) { + frame->bytes_recvd += 32 - offset; // Bytes out + memcpy(frame->rawdata, in + offset, 32 - offset); + read += 32; + } + + while (read < n - 1) { + allzero = 1; + for (b = 0; b < 32; b++) { + if (in[read + b]) { + allzero = 0; + break; + } + } + + if (allzero) { + /* Don't copy it */ + } else { + if (frame->bytes_recvd + copied + 32 <= max_raw) + { + memcpy(frame->rawdata + + frame->bytes_recvd + copied, + in + read, 32); + copied += 32; + } else { + PDEBUG(3, "Raw data buffer overrun!!"); + } + } + read += 32; + } + + frame->bytes_recvd += copied; + } +} + +static inline void +ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n) +{ + int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight); + struct ov511_frame *frame = &ov->frame[ov->curframe]; + struct timeval *ts; + + /* Don't copy the packet number byte */ + if (ov->packet_numbering) + --n; + + /* A false positive here is likely, until OVT gives me + * the definitive SOF/EOF format */ + if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) { + if (printph) { + info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0], + in[1], in[2], in[3], in[4], in[5], in[6], in[7]); + } + + if (frame->scanstate == STATE_LINES) { + PDEBUG(4, "Detected frame end/start"); + goto eof; + } else { //scanstate == STATE_SCANNING + /* Frame start */ + PDEBUG(4, "Frame start, framenum = %d", ov->curframe); + goto sof; + } + } else { + goto check_middle; + } + +eof: + ts = (struct timeval *)(frame->data + + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight)); + do_gettimeofday(ts); + + PDEBUG(4, "Frame end, curframe = %d, hw=%d, vw=%d, recvd=%d", + ov->curframe, + (int)(in[9]), (int)(in[10]), frame->bytes_recvd); + + // FIXME: Since we don't know the header formats yet, + // there is no way to know what the actual image size is + frame->rawwidth = frame->width; + frame->rawheight = frame->height; + + /* Validate the header data */ + RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth); + RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, ov->maxheight); + + /* Don't allow byte count to exceed buffer size */ + RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw); + + if (frame->scanstate == STATE_LINES) { + int nextf; + + frame->grabstate = FRAME_DONE; + wake_up_interruptible(&frame->wq); + + /* If next frame is ready or grabbing, + * point to it */ + nextf = (ov->curframe + 1) % OV511_NUMFRAMES; + if (ov->frame[nextf].grabstate == FRAME_READY + || ov->frame[nextf].grabstate == FRAME_GRABBING) { + ov->curframe = nextf; + ov->frame[nextf].scanstate = STATE_SCANNING; + frame = &ov->frame[nextf]; + } else { + if (frame->grabstate == FRAME_DONE) { + PDEBUG(4, "** Frame done **"); + } else { + PDEBUG(4, "Frame not ready? state = %d", + ov->frame[nextf].grabstate); + } + + ov->curframe = -1; + PDEBUG(4, "SOF dropped (no active frame)"); + return; /* Nowhere to store this frame */ + } + } +sof: + PDEBUG(4, "Starting capture on frame %d", frame->framenum); + +// Snapshot not reverse-engineered yet. +#if 0 + /* Check to see if it's a snapshot frame */ + /* FIXME?? Should the snapshot reset go here? Performance? */ + if (in[8] & 0x02) { + frame->snapshot = 1; + PDEBUG(3, "snapshot detected"); + } +#endif + frame->scanstate = STATE_LINES; + frame->bytes_recvd = 0; + frame->compressed = 1; + +check_middle: + /* Are we in a frame? */ + if (frame->scanstate != STATE_LINES) { + PDEBUG(4, "scanstate: no SOF yet"); + return; + } + + /* Dump all data exactly as received */ + if (dumppix == 2) { + frame->bytes_recvd += n; + if (frame->bytes_recvd <= max_raw) + memcpy(frame->rawdata + frame->bytes_recvd - n, in, n); + else + PDEBUG(3, "Raw data buffer overrun!! (%d)", + frame->bytes_recvd - max_raw); + } else { + /* All incoming data are divided into 8-byte segments. If the + * segment contains all zero bytes, it must be skipped. These + * zero-segments allow the OV518 to mainain a constant data rate + * regardless of the effectiveness of the compression. Segments + * are aligned relative to the beginning of each isochronous + * packet. The first segment in each image is a header (the + * decompressor skips it later). + */ + + int b, read = 0, allzero, copied = 0; + + while (read < n) { + allzero = 1; + for (b = 0; b < 8; b++) { + if (in[read + b]) { + allzero = 0; + break; + } + } + + if (allzero) { + /* Don't copy it */ + } else { + if (frame->bytes_recvd + copied + 8 <= max_raw) + { + memcpy(frame->rawdata + + frame->bytes_recvd + copied, + in + read, 8); + copied += 8; + } else { + PDEBUG(3, "Raw data buffer overrun!!"); + } + } + read += 8; + } + frame->bytes_recvd += copied; + } +} + +static void +ov51x_isoc_irq(struct urb *urb, struct pt_regs *regs) +{ + int i; + struct usb_ov511 *ov; + struct ov511_sbuf *sbuf; + + if (!urb->context) { + PDEBUG(4, "no context"); + return; + } + + sbuf = urb->context; + ov = sbuf->ov; + + if (!ov || !ov->dev || !ov->user) { + PDEBUG(4, "no device, or not open"); + return; + } + + if (!ov->streaming) { + PDEBUG(4, "hmmm... not streaming, but got interrupt"); + return; + } + + if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + PDEBUG(4, "URB unlinked"); + return; + } + + if (urb->status != -EINPROGRESS && urb->status != 0) { + err("ERROR: urb->status=%d: %s", urb->status, + symbolic(urb_errlist, urb->status)); + } + + /* Copy the data received into our frame buffer */ + PDEBUG(5, "sbuf[%d]: Moving %d packets", sbuf->n, + urb->number_of_packets); + for (i = 0; i < urb->number_of_packets; i++) { + /* Warning: Don't call *_move_data() if no frame active! */ + if (ov->curframe >= 0) { + int n = urb->iso_frame_desc[i].actual_length; + int st = urb->iso_frame_desc[i].status; + unsigned char *cdata; + + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = 0; + + cdata = urb->transfer_buffer + + urb->iso_frame_desc[i].offset; + + if (!n) { + PDEBUG(4, "Zero-length packet"); + continue; + } + + if (st) + PDEBUG(2, "data error: [%d] len=%d, status=%d", + i, n, st); + + if (ov->bclass == BCL_OV511) + ov511_move_data(ov, cdata, n); + else if (ov->bclass == BCL_OV518) + ov518_move_data(ov, cdata, n); + else + err("Unknown bridge device (%d)", ov->bridge); + + } else if (waitqueue_active(&ov->wq)) { + wake_up_interruptible(&ov->wq); + } + } + + /* Resubmit this URB */ + urb->dev = ov->dev; + if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) + err("usb_submit_urb() ret %d", i); + + return; +} + +/**************************************************************************** + * + * Stream initialization and termination + * + ***************************************************************************/ + +static int +ov51x_init_isoc(struct usb_ov511 *ov) +{ + struct urb *urb; + int fx, err, n, size; + + PDEBUG(3, "*** Initializing capture ***"); + + ov->curframe = -1; + + if (ov->bridge == BRG_OV511) { + if (cams == 1) + size = 993; + else if (cams == 2) + size = 513; + else if (cams == 3 || cams == 4) + size = 257; + else { + err("\"cams\" parameter too high!"); + return -1; + } + } else if (ov->bridge == BRG_OV511PLUS) { + if (cams == 1) + size = 961; + else if (cams == 2) + size = 513; + else if (cams == 3 || cams == 4) + size = 257; + else if (cams >= 5 && cams <= 8) + size = 129; + else if (cams >= 9 && cams <= 31) + size = 33; + else { + err("\"cams\" parameter too high!"); + return -1; + } + } else if (ov->bclass == BCL_OV518) { + if (cams == 1) + size = 896; + else if (cams == 2) + size = 512; + else if (cams == 3 || cams == 4) + size = 256; + else if (cams >= 5 && cams <= 8) + size = 128; + else { + err("\"cams\" parameter too high!"); + return -1; + } + } else { + err("invalid bridge type"); + return -1; + } + + // FIXME: OV518 is hardcoded to 15 FPS (alternate 5) for now + if (ov->bclass == BCL_OV518) { + if (packetsize == -1) { + ov518_set_packet_size(ov, 640); + } else { + info("Forcing packet size to %d", packetsize); + ov518_set_packet_size(ov, packetsize); + } + } else { + if (packetsize == -1) { + ov511_set_packet_size(ov, size); + } else { + info("Forcing packet size to %d", packetsize); + ov511_set_packet_size(ov, packetsize); + } + } + + for (n = 0; n < OV511_NUMSBUF; n++) { + urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if (!urb) { + err("init isoc: usb_alloc_urb ret. NULL"); + return -ENOMEM; + } + ov->sbuf[n].urb = urb; + urb->dev = ov->dev; + urb->context = &ov->sbuf[n]; + urb->pipe = usb_rcvisocpipe(ov->dev, OV511_ENDPOINT_ADDRESS); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = ov->sbuf[n].data; + urb->complete = ov51x_isoc_irq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = ov->packet_size * FRAMES_PER_DESC; + urb->interval = 1; + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + urb->iso_frame_desc[fx].offset = ov->packet_size * fx; + urb->iso_frame_desc[fx].length = ov->packet_size; + } + } + + ov->streaming = 1; + + for (n = 0; n < OV511_NUMSBUF; n++) { + ov->sbuf[n].urb->dev = ov->dev; + err = usb_submit_urb(ov->sbuf[n].urb, GFP_KERNEL); + if (err) { + err("init isoc: usb_submit_urb(%d) ret %d", n, err); + return err; + } + } + + return 0; +} + +static void +ov51x_unlink_isoc(struct usb_ov511 *ov) +{ + int n; + + /* Unschedule all of the iso td's */ + for (n = OV511_NUMSBUF - 1; n >= 0; n--) { + if (ov->sbuf[n].urb) { + usb_kill_urb(ov->sbuf[n].urb); + usb_free_urb(ov->sbuf[n].urb); + ov->sbuf[n].urb = NULL; + } + } +} + +static void +ov51x_stop_isoc(struct usb_ov511 *ov) +{ + if (!ov->streaming || !ov->dev) + return; + + PDEBUG(3, "*** Stopping capture ***"); + + if (ov->bclass == BCL_OV518) + ov518_set_packet_size(ov, 0); + else + ov511_set_packet_size(ov, 0); + + ov->streaming = 0; + + ov51x_unlink_isoc(ov); +} + +static int +ov51x_new_frame(struct usb_ov511 *ov, int framenum) +{ + struct ov511_frame *frame; + int newnum; + + PDEBUG(4, "ov->curframe = %d, framenum = %d", ov->curframe, framenum); + + if (!ov->dev) + return -1; + + /* If we're not grabbing a frame right now and the other frame is */ + /* ready to be grabbed into, then use it instead */ + if (ov->curframe == -1) { + newnum = (framenum - 1 + OV511_NUMFRAMES) % OV511_NUMFRAMES; + if (ov->frame[newnum].grabstate == FRAME_READY) + framenum = newnum; + } else + return 0; + + frame = &ov->frame[framenum]; + + PDEBUG(4, "framenum = %d, width = %d, height = %d", framenum, + frame->width, frame->height); + + frame->grabstate = FRAME_GRABBING; + frame->scanstate = STATE_SCANNING; + frame->snapshot = 0; + + ov->curframe = framenum; + + /* Make sure it's not too big */ + if (frame->width > ov->maxwidth) + frame->width = ov->maxwidth; + + frame->width &= ~7L; /* Multiple of 8 */ + + if (frame->height > ov->maxheight) + frame->height = ov->maxheight; + + frame->height &= ~3L; /* Multiple of 4 */ + + return 0; +} + +/**************************************************************************** + * + * Buffer management + * + ***************************************************************************/ + +/* + * - You must acquire buf_lock before entering this function. + * - Because this code will free any non-null pointer, you must be sure to null + * them if you explicitly free them somewhere else! + */ +static void +ov51x_do_dealloc(struct usb_ov511 *ov) +{ + int i; + PDEBUG(4, "entered"); + + if (ov->fbuf) { + rvfree(ov->fbuf, OV511_NUMFRAMES + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)); + ov->fbuf = NULL; + } + + vfree(ov->rawfbuf); + ov->rawfbuf = NULL; + + vfree(ov->tempfbuf); + ov->tempfbuf = NULL; + + for (i = 0; i < OV511_NUMSBUF; i++) { + kfree(ov->sbuf[i].data); + ov->sbuf[i].data = NULL; + } + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].data = NULL; + ov->frame[i].rawdata = NULL; + ov->frame[i].tempdata = NULL; + if (ov->frame[i].compbuf) { + free_page((unsigned long) ov->frame[i].compbuf); + ov->frame[i].compbuf = NULL; + } + } + + PDEBUG(4, "buffer memory deallocated"); + ov->buf_state = BUF_NOT_ALLOCATED; + PDEBUG(4, "leaving"); +} + +static int +ov51x_alloc(struct usb_ov511 *ov) +{ + int i; + const int w = ov->maxwidth; + const int h = ov->maxheight; + const int data_bufsize = OV511_NUMFRAMES * MAX_DATA_SIZE(w, h); + const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h); + + PDEBUG(4, "entered"); + mutex_lock(&ov->buf_lock); + + if (ov->buf_state == BUF_ALLOCATED) + goto out; + + ov->fbuf = rvmalloc(data_bufsize); + if (!ov->fbuf) + goto error; + + ov->rawfbuf = vmalloc(raw_bufsize); + if (!ov->rawfbuf) + goto error; + + memset(ov->rawfbuf, 0, raw_bufsize); + + ov->tempfbuf = vmalloc(raw_bufsize); + if (!ov->tempfbuf) + goto error; + + memset(ov->tempfbuf, 0, raw_bufsize); + + for (i = 0; i < OV511_NUMSBUF; i++) { + ov->sbuf[i].data = kmalloc(FRAMES_PER_DESC * + MAX_FRAME_SIZE_PER_DESC, GFP_KERNEL); + if (!ov->sbuf[i].data) + goto error; + + PDEBUG(4, "sbuf[%d] @ %p", i, ov->sbuf[i].data); + } + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].data = ov->fbuf + i * MAX_DATA_SIZE(w, h); + ov->frame[i].rawdata = ov->rawfbuf + + i * MAX_RAW_DATA_SIZE(w, h); + ov->frame[i].tempdata = ov->tempfbuf + + i * MAX_RAW_DATA_SIZE(w, h); + + ov->frame[i].compbuf = + (unsigned char *) __get_free_page(GFP_KERNEL); + if (!ov->frame[i].compbuf) + goto error; + + PDEBUG(4, "frame[%d] @ %p", i, ov->frame[i].data); + } + + ov->buf_state = BUF_ALLOCATED; +out: + mutex_unlock(&ov->buf_lock); + PDEBUG(4, "leaving"); + return 0; +error: + ov51x_do_dealloc(ov); + mutex_unlock(&ov->buf_lock); + PDEBUG(4, "errored"); + return -ENOMEM; +} + +static void +ov51x_dealloc(struct usb_ov511 *ov) +{ + PDEBUG(4, "entered"); + mutex_lock(&ov->buf_lock); + ov51x_do_dealloc(ov); + mutex_unlock(&ov->buf_lock); + PDEBUG(4, "leaving"); +} + +/**************************************************************************** + * + * V4L 1 API + * + ***************************************************************************/ + +static int +ov51x_v4l1_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct usb_ov511 *ov = video_get_drvdata(vdev); + int err, i; + + PDEBUG(4, "opening"); + + mutex_lock(&ov->lock); + + err = -EBUSY; + if (ov->user) + goto out; + + ov->sub_flag = 0; + + /* In case app doesn't set them... */ + err = ov51x_set_default_params(ov); + if (err < 0) + goto out; + + /* Make sure frames are reset */ + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].grabstate = FRAME_UNUSED; + ov->frame[i].bytes_read = 0; + } + + /* If compression is on, make sure now that a + * decompressor can be loaded */ + if (ov->compress && !ov->decomp_ops) { + err = request_decompressor(ov); + if (err && !dumppix) + goto out; + } + + err = ov51x_alloc(ov); + if (err < 0) + goto out; + + err = ov51x_init_isoc(ov); + if (err) { + ov51x_dealloc(ov); + goto out; + } + + ov->user++; + file->private_data = vdev; + + if (ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 1); + +out: + mutex_unlock(&ov->lock); + return err; +} + +static int +ov51x_v4l1_close(struct inode *inode, struct file *file) +{ + struct video_device *vdev = file->private_data; + struct usb_ov511 *ov = video_get_drvdata(vdev); + + PDEBUG(4, "ov511_close"); + + mutex_lock(&ov->lock); + + ov->user--; + ov51x_stop_isoc(ov); + + if (ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 0); + + if (ov->dev) + ov51x_dealloc(ov); + + mutex_unlock(&ov->lock); + + /* Device unplugged while open. Only a minimum of unregistration is done + * here; the disconnect callback already did the rest. */ + if (!ov->dev) { + mutex_lock(&ov->cbuf_lock); + kfree(ov->cbuf); + ov->cbuf = NULL; + mutex_unlock(&ov->cbuf_lock); + + ov51x_dealloc(ov); + kfree(ov); + ov = NULL; + } + + file->private_data = NULL; + return 0; +} + +/* Do not call this function directly! */ +static int +ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct usb_ov511 *ov = video_get_drvdata(vdev); + PDEBUG(5, "IOCtl: 0x%X", cmd); + + if (!ov->dev) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + + PDEBUG(4, "VIDIOCGCAP"); + + memset(b, 0, sizeof(struct video_capability)); + sprintf(b->name, "%s USB Camera", + symbolic(brglist, ov->bridge)); + b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE; + b->channels = ov->num_inputs; + b->audios = 0; + b->maxwidth = ov->maxwidth; + b->maxheight = ov->maxheight; + b->minwidth = ov->minwidth; + b->minheight = ov->minheight; + + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + + PDEBUG(4, "VIDIOCGCHAN"); + + if ((unsigned)(v->channel) >= ov->num_inputs) { + err("Invalid channel (%d)", v->channel); + return -EINVAL; + } + + v->norm = ov->norm; + v->type = VIDEO_TYPE_CAMERA; + v->flags = 0; +// v->flags |= (ov->has_decoder) ? VIDEO_VC_NORM : 0; + v->tuners = 0; + decoder_get_input_name(ov, v->channel, v->name); + + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + int err; + + PDEBUG(4, "VIDIOCSCHAN"); + + /* Make sure it's not a camera */ + if (!ov->has_decoder) { + if (v->channel == 0) + return 0; + else + return -EINVAL; + } + + if (v->norm != VIDEO_MODE_PAL && + v->norm != VIDEO_MODE_NTSC && + v->norm != VIDEO_MODE_SECAM && + v->norm != VIDEO_MODE_AUTO) { + err("Invalid norm (%d)", v->norm); + return -EINVAL; + } + + if ((unsigned)(v->channel) >= ov->num_inputs) { + err("Invalid channel (%d)", v->channel); + return -EINVAL; + } + + err = decoder_set_input(ov, v->channel); + if (err) + return err; + + err = decoder_set_norm(ov, v->norm); + if (err) + return err; + + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *p = arg; + + PDEBUG(4, "VIDIOCGPICT"); + + memset(p, 0, sizeof(struct video_picture)); + if (sensor_get_picture(ov, p)) + return -EIO; + + /* Can we get these from frame[0]? -claudio? */ + p->depth = ov->frame[0].depth; + p->palette = ov->frame[0].format; + + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *p = arg; + int i, rc; + + PDEBUG(4, "VIDIOCSPICT"); + + if (!get_depth(p->palette)) + return -EINVAL; + + if (sensor_set_picture(ov, p)) + return -EIO; + + if (force_palette && p->palette != force_palette) { + info("Palette rejected (%s)", + symbolic(v4l1_plist, p->palette)); + return -EINVAL; + } + + // FIXME: Format should be independent of frames + if (p->palette != ov->frame[0].format) { + PDEBUG(4, "Detected format change"); + + rc = ov51x_wait_frames_inactive(ov); + if (rc) + return rc; + + mode_init_regs(ov, ov->frame[0].width, + ov->frame[0].height, p->palette, ov->sub_flag); + } + + PDEBUG(4, "Setting depth=%d, palette=%s", + p->depth, symbolic(v4l1_plist, p->palette)); + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].depth = p->depth; + ov->frame[i].format = p->palette; + } + + return 0; + } + case VIDIOCGCAPTURE: + { + int *vf = arg; + + PDEBUG(4, "VIDIOCGCAPTURE"); + + ov->sub_flag = *vf; + return 0; + } + case VIDIOCSCAPTURE: + { + struct video_capture *vc = arg; + + PDEBUG(4, "VIDIOCSCAPTURE"); + + if (vc->flags) + return -EINVAL; + if (vc->decimation) + return -EINVAL; + + vc->x &= ~3L; + vc->y &= ~1L; + vc->y &= ~31L; + + if (vc->width == 0) + vc->width = 32; + + vc->height /= 16; + vc->height *= 16; + if (vc->height == 0) + vc->height = 16; + + ov->subx = vc->x; + ov->suby = vc->y; + ov->subw = vc->width; + ov->subh = vc->height; + + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + int i, rc; + + PDEBUG(4, "VIDIOCSWIN: %dx%d", vw->width, vw->height); + +#if 0 + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (vw->height != ov->maxheight) + return -EINVAL; + if (vw->width != ov->maxwidth) + return -EINVAL; +#endif + + rc = ov51x_wait_frames_inactive(ov); + if (rc) + return rc; + + rc = mode_init_regs(ov, vw->width, vw->height, + ov->frame[0].format, ov->sub_flag); + if (rc < 0) + return rc; + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].width = vw->width; + ov->frame[i].height = vw->height; + } + + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + memset(vw, 0, sizeof(struct video_window)); + vw->x = 0; /* FIXME */ + vw->y = 0; + vw->width = ov->frame[0].width; + vw->height = ov->frame[0].height; + vw->flags = 30; + + PDEBUG(4, "VIDIOCGWIN: %dx%d", vw->width, vw->height); + + return 0; + } + case VIDIOCGMBUF: + { + struct video_mbuf *vm = arg; + int i; + + PDEBUG(4, "VIDIOCGMBUF"); + + memset(vm, 0, sizeof(struct video_mbuf)); + vm->size = OV511_NUMFRAMES + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight); + vm->frames = OV511_NUMFRAMES; + + vm->offsets[0] = 0; + for (i = 1; i < OV511_NUMFRAMES; i++) { + vm->offsets[i] = vm->offsets[i-1] + + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight); + } + + return 0; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *vm = arg; + int rc, depth; + unsigned int f = vm->frame; + + PDEBUG(4, "VIDIOCMCAPTURE: frame: %d, %dx%d, %s", f, vm->width, + vm->height, symbolic(v4l1_plist, vm->format)); + + depth = get_depth(vm->format); + if (!depth) { + PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)", + symbolic(v4l1_plist, vm->format)); + return -EINVAL; + } + + if (f >= OV511_NUMFRAMES) { + err("VIDIOCMCAPTURE: invalid frame (%d)", f); + return -EINVAL; + } + + if (vm->width > ov->maxwidth + || vm->height > ov->maxheight) { + err("VIDIOCMCAPTURE: requested dimensions too big"); + return -EINVAL; + } + + if (ov->frame[f].grabstate == FRAME_GRABBING) { + PDEBUG(4, "VIDIOCMCAPTURE: already grabbing"); + return -EBUSY; + } + + if (force_palette && (vm->format != force_palette)) { + PDEBUG(2, "palette rejected (%s)", + symbolic(v4l1_plist, vm->format)); + return -EINVAL; + } + + if ((ov->frame[f].width != vm->width) || + (ov->frame[f].height != vm->height) || + (ov->frame[f].format != vm->format) || + (ov->frame[f].sub_flag != ov->sub_flag) || + (ov->frame[f].depth != depth)) { + PDEBUG(4, "VIDIOCMCAPTURE: change in image parameters"); + + rc = ov51x_wait_frames_inactive(ov); + if (rc) + return rc; + + rc = mode_init_regs(ov, vm->width, vm->height, + vm->format, ov->sub_flag); +#if 0 + if (rc < 0) { + PDEBUG(1, "Got error while initializing regs "); + return ret; + } +#endif + ov->frame[f].width = vm->width; + ov->frame[f].height = vm->height; + ov->frame[f].format = vm->format; + ov->frame[f].sub_flag = ov->sub_flag; + ov->frame[f].depth = depth; + } + + /* Mark it as ready */ + ov->frame[f].grabstate = FRAME_READY; + + PDEBUG(4, "VIDIOCMCAPTURE: renewing frame %d", f); + + return ov51x_new_frame(ov, f); + } + case VIDIOCSYNC: + { + unsigned int fnum = *((unsigned int *) arg); + struct ov511_frame *frame; + int rc; + + if (fnum >= OV511_NUMFRAMES) { + err("VIDIOCSYNC: invalid frame (%d)", fnum); + return -EINVAL; + } + + frame = &ov->frame[fnum]; + + PDEBUG(4, "syncing to frame %d, grabstate = %d", fnum, + frame->grabstate); + + switch (frame->grabstate) { + case FRAME_UNUSED: + return -EINVAL; + case FRAME_READY: + case FRAME_GRABBING: + case FRAME_ERROR: +redo: + if (!ov->dev) + return -EIO; + + rc = wait_event_interruptible(frame->wq, + (frame->grabstate == FRAME_DONE) + || (frame->grabstate == FRAME_ERROR)); + + if (rc) + return rc; + + if (frame->grabstate == FRAME_ERROR) { + if ((rc = ov51x_new_frame(ov, fnum)) < 0) + return rc; + goto redo; + } + /* Fall through */ + case FRAME_DONE: + if (ov->snap_enabled && !frame->snapshot) { + if ((rc = ov51x_new_frame(ov, fnum)) < 0) + return rc; + goto redo; + } + + frame->grabstate = FRAME_UNUSED; + + /* Reset the hardware snapshot button */ + /* FIXME - Is this the best place for this? */ + if ((ov->snap_enabled) && (frame->snapshot)) { + frame->snapshot = 0; + ov51x_clear_snapshot(ov); + } + + /* Decompression, format conversion, etc... */ + ov51x_postprocess(ov, frame); + + break; + } /* end switch */ + + return 0; + } + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + PDEBUG(4, "VIDIOCGFBUF"); + + memset(vb, 0, sizeof(struct video_buffer)); + + return 0; + } + case VIDIOCGUNIT: + { + struct video_unit *vu = arg; + + PDEBUG(4, "VIDIOCGUNIT"); + + memset(vu, 0, sizeof(struct video_unit)); + + vu->video = ov->vdev->minor; + vu->vbi = VIDEO_NO_UNIT; + vu->radio = VIDEO_NO_UNIT; + vu->audio = VIDEO_NO_UNIT; + vu->teletext = VIDEO_NO_UNIT; + + return 0; + } + case OV511IOC_WI2C: + { + struct ov511_i2c_struct *w = arg; + + return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask); + } + case OV511IOC_RI2C: + { + struct ov511_i2c_struct *r = arg; + int rc; + + rc = i2c_r_slave(ov, r->slave, r->reg); + if (rc < 0) + return rc; + + r->value = rc; + return 0; + } + default: + PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd); + return -ENOIOCTLCMD; + } /* end switch */ + + return 0; +} + +static int +ov51x_v4l1_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct video_device *vdev = file->private_data; + struct usb_ov511 *ov = video_get_drvdata(vdev); + int rc; + + if (mutex_lock_interruptible(&ov->lock)) + return -EINTR; + + rc = video_usercopy(inode, file, cmd, arg, ov51x_v4l1_ioctl_internal); + + mutex_unlock(&ov->lock); + return rc; +} + +static ssize_t +ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos) +{ + struct video_device *vdev = file->private_data; + int noblock = file->f_flags&O_NONBLOCK; + unsigned long count = cnt; + struct usb_ov511 *ov = video_get_drvdata(vdev); + int i, rc = 0, frmx = -1; + struct ov511_frame *frame; + + if (mutex_lock_interruptible(&ov->lock)) + return -EINTR; + + PDEBUG(4, "%ld bytes, noblock=%d", count, noblock); + + if (!vdev || !buf) { + rc = -EFAULT; + goto error; + } + + if (!ov->dev) { + rc = -EIO; + goto error; + } + +// FIXME: Only supports two frames + /* See if a frame is completed, then use it. */ + if (ov->frame[0].grabstate >= FRAME_DONE) /* _DONE or _ERROR */ + frmx = 0; + else if (ov->frame[1].grabstate >= FRAME_DONE)/* _DONE or _ERROR */ + frmx = 1; + + /* If nonblocking we return immediately */ + if (noblock && (frmx == -1)) { + rc = -EAGAIN; + goto error; + } + + /* If no FRAME_DONE, look for a FRAME_GRABBING state. */ + /* See if a frame is in process (grabbing), then use it. */ + if (frmx == -1) { + if (ov->frame[0].grabstate == FRAME_GRABBING) + frmx = 0; + else if (ov->frame[1].grabstate == FRAME_GRABBING) + frmx = 1; + } + + /* If no frame is active, start one. */ + if (frmx == -1) { + if ((rc = ov51x_new_frame(ov, frmx = 0))) { + err("read: ov51x_new_frame error"); + goto error; + } + } + + frame = &ov->frame[frmx]; + +restart: + if (!ov->dev) { + rc = -EIO; + goto error; + } + + /* Wait while we're grabbing the image */ + PDEBUG(4, "Waiting image grabbing"); + rc = wait_event_interruptible(frame->wq, + (frame->grabstate == FRAME_DONE) + || (frame->grabstate == FRAME_ERROR)); + + if (rc) + goto error; + + PDEBUG(4, "Got image, frame->grabstate = %d", frame->grabstate); + PDEBUG(4, "bytes_recvd = %d", frame->bytes_recvd); + + if (frame->grabstate == FRAME_ERROR) { + frame->bytes_read = 0; + err("** ick! ** Errored frame %d", ov->curframe); + if (ov51x_new_frame(ov, frmx)) { + err("read: ov51x_new_frame error"); + goto error; + } + goto restart; + } + + + /* Repeat until we get a snapshot frame */ + if (ov->snap_enabled) + PDEBUG(4, "Waiting snapshot frame"); + if (ov->snap_enabled && !frame->snapshot) { + frame->bytes_read = 0; + if ((rc = ov51x_new_frame(ov, frmx))) { + err("read: ov51x_new_frame error"); + goto error; + } + goto restart; + } + + /* Clear the snapshot */ + if (ov->snap_enabled && frame->snapshot) { + frame->snapshot = 0; + ov51x_clear_snapshot(ov); + } + + /* Decompression, format conversion, etc... */ + ov51x_postprocess(ov, frame); + + PDEBUG(4, "frmx=%d, bytes_read=%ld, length=%ld", frmx, + frame->bytes_read, + get_frame_length(frame)); + + /* copy bytes to user space; we allow for partials reads */ +// if ((count + frame->bytes_read) +// > get_frame_length((struct ov511_frame *)frame)) +// count = frame->scanlength - frame->bytes_read; + + /* FIXME - count hardwired to be one frame... */ + count = get_frame_length(frame); + + PDEBUG(4, "Copy to user space: %ld bytes", count); + if ((i = copy_to_user(buf, frame->data + frame->bytes_read, count))) { + PDEBUG(4, "Copy failed! %d bytes not copied", i); + rc = -EFAULT; + goto error; + } + + frame->bytes_read += count; + PDEBUG(4, "{copy} count used=%ld, new bytes_read=%ld", + count, frame->bytes_read); + + /* If all data have been read... */ + if (frame->bytes_read + >= get_frame_length(frame)) { + frame->bytes_read = 0; + +// FIXME: Only supports two frames + /* Mark it as available to be used again. */ + ov->frame[frmx].grabstate = FRAME_UNUSED; + if ((rc = ov51x_new_frame(ov, !frmx))) { + err("ov51x_new_frame returned error"); + goto error; + } + } + + PDEBUG(4, "read finished, returning %ld (sweet)", count); + + mutex_unlock(&ov->lock); + return count; + +error: + mutex_unlock(&ov->lock); + return rc; +} + +static int +ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = file->private_data; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end - vma->vm_start; + struct usb_ov511 *ov = video_get_drvdata(vdev); + unsigned long page, pos; + + if (ov->dev == NULL) + return -EIO; + + PDEBUG(4, "mmap: %ld (%lX) bytes", size, size); + + if (size > (((OV511_NUMFRAMES + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight) + + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))) + return -EINVAL; + + if (mutex_lock_interruptible(&ov->lock)) + return -EINTR; + + pos = (unsigned long)ov->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&ov->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + mutex_unlock(&ov->lock); + return 0; +} + +static struct file_operations ov511_fops = { + .owner = THIS_MODULE, + .open = ov51x_v4l1_open, + .release = ov51x_v4l1_close, + .read = ov51x_v4l1_read, + .mmap = ov51x_v4l1_mmap, + .ioctl = ov51x_v4l1_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +static struct video_device vdev_template = { + .owner = THIS_MODULE, + .name = "OV511 USB Camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_OV511, + .fops = &ov511_fops, + .release = video_device_release, + .minor = -1, +}; + +/**************************************************************************** + * + * OV511 and sensor configuration + * + ***************************************************************************/ + +/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses + * the same register settings as the OV7610, since they are very similar. + */ +static int +ov7xx0_configure(struct usb_ov511 *ov) +{ + int i, success; + int rc; + + /* Lawrence Glaister <lg@jfm.bc.ca> reports: + * + * Register 0x0f in the 7610 has the following effects: + * + * 0x85 (AEC method 1): Best overall, good contrast range + * 0x45 (AEC method 2): Very overexposed + * 0xa5 (spec sheet default): Ok, but the black level is + * shifted resulting in loss of contrast + * 0x05 (old driver setting): very overexposed, too much + * contrast + */ + static struct ov511_regvals aRegvalsNorm7610[] = { + { OV511_I2C_BUS, 0x10, 0xff }, + { OV511_I2C_BUS, 0x16, 0x06 }, + { OV511_I2C_BUS, 0x28, 0x24 }, + { OV511_I2C_BUS, 0x2b, 0xac }, + { OV511_I2C_BUS, 0x12, 0x00 }, + { OV511_I2C_BUS, 0x38, 0x81 }, + { OV511_I2C_BUS, 0x28, 0x24 }, /* 0c */ + { OV511_I2C_BUS, 0x0f, 0x85 }, /* lg's setting */ + { OV511_I2C_BUS, 0x15, 0x01 }, + { OV511_I2C_BUS, 0x20, 0x1c }, + { OV511_I2C_BUS, 0x23, 0x2a }, + { OV511_I2C_BUS, 0x24, 0x10 }, + { OV511_I2C_BUS, 0x25, 0x8a }, + { OV511_I2C_BUS, 0x26, 0xa2 }, + { OV511_I2C_BUS, 0x27, 0xc2 }, + { OV511_I2C_BUS, 0x2a, 0x04 }, + { OV511_I2C_BUS, 0x2c, 0xfe }, + { OV511_I2C_BUS, 0x2d, 0x93 }, + { OV511_I2C_BUS, 0x30, 0x71 }, + { OV511_I2C_BUS, 0x31, 0x60 }, + { OV511_I2C_BUS, 0x32, 0x26 }, + { OV511_I2C_BUS, 0x33, 0x20 }, + { OV511_I2C_BUS, 0x34, 0x48 }, + { OV511_I2C_BUS, 0x12, 0x24 }, + { OV511_I2C_BUS, 0x11, 0x01 }, + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0d, 0x24 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + static struct ov511_regvals aRegvalsNorm7620[] = { + { OV511_I2C_BUS, 0x00, 0x00 }, + { OV511_I2C_BUS, 0x01, 0x80 }, + { OV511_I2C_BUS, 0x02, 0x80 }, + { OV511_I2C_BUS, 0x03, 0xc0 }, + { OV511_I2C_BUS, 0x06, 0x60 }, + { OV511_I2C_BUS, 0x07, 0x00 }, + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0d, 0x24 }, + { OV511_I2C_BUS, 0x11, 0x01 }, + { OV511_I2C_BUS, 0x12, 0x24 }, + { OV511_I2C_BUS, 0x13, 0x01 }, + { OV511_I2C_BUS, 0x14, 0x84 }, + { OV511_I2C_BUS, 0x15, 0x01 }, + { OV511_I2C_BUS, 0x16, 0x03 }, + { OV511_I2C_BUS, 0x17, 0x2f }, + { OV511_I2C_BUS, 0x18, 0xcf }, + { OV511_I2C_BUS, 0x19, 0x06 }, + { OV511_I2C_BUS, 0x1a, 0xf5 }, + { OV511_I2C_BUS, 0x1b, 0x00 }, + { OV511_I2C_BUS, 0x20, 0x18 }, + { OV511_I2C_BUS, 0x21, 0x80 }, + { OV511_I2C_BUS, 0x22, 0x80 }, + { OV511_I2C_BUS, 0x23, 0x00 }, + { OV511_I2C_BUS, 0x26, 0xa2 }, + { OV511_I2C_BUS, 0x27, 0xea }, + { OV511_I2C_BUS, 0x28, 0x20 }, + { OV511_I2C_BUS, 0x29, 0x00 }, + { OV511_I2C_BUS, 0x2a, 0x10 }, + { OV511_I2C_BUS, 0x2b, 0x00 }, + { OV511_I2C_BUS, 0x2c, 0x88 }, + { OV511_I2C_BUS, 0x2d, 0x91 }, + { OV511_I2C_BUS, 0x2e, 0x80 }, + { OV511_I2C_BUS, 0x2f, 0x44 }, + { OV511_I2C_BUS, 0x60, 0x27 }, + { OV511_I2C_BUS, 0x61, 0x02 }, + { OV511_I2C_BUS, 0x62, 0x5f }, + { OV511_I2C_BUS, 0x63, 0xd5 }, + { OV511_I2C_BUS, 0x64, 0x57 }, + { OV511_I2C_BUS, 0x65, 0x83 }, + { OV511_I2C_BUS, 0x66, 0x55 }, + { OV511_I2C_BUS, 0x67, 0x92 }, + { OV511_I2C_BUS, 0x68, 0xcf }, + { OV511_I2C_BUS, 0x69, 0x76 }, + { OV511_I2C_BUS, 0x6a, 0x22 }, + { OV511_I2C_BUS, 0x6b, 0x00 }, + { OV511_I2C_BUS, 0x6c, 0x02 }, + { OV511_I2C_BUS, 0x6d, 0x44 }, + { OV511_I2C_BUS, 0x6e, 0x80 }, + { OV511_I2C_BUS, 0x6f, 0x1d }, + { OV511_I2C_BUS, 0x70, 0x8b }, + { OV511_I2C_BUS, 0x71, 0x00 }, + { OV511_I2C_BUS, 0x72, 0x14 }, + { OV511_I2C_BUS, 0x73, 0x54 }, + { OV511_I2C_BUS, 0x74, 0x00 }, + { OV511_I2C_BUS, 0x75, 0x8e }, + { OV511_I2C_BUS, 0x76, 0x00 }, + { OV511_I2C_BUS, 0x77, 0xff }, + { OV511_I2C_BUS, 0x78, 0x80 }, + { OV511_I2C_BUS, 0x79, 0x80 }, + { OV511_I2C_BUS, 0x7a, 0x80 }, + { OV511_I2C_BUS, 0x7b, 0xe2 }, + { OV511_I2C_BUS, 0x7c, 0x00 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + PDEBUG(4, "starting configuration"); + + /* This looks redundant, but is necessary for WebCam 3 */ + ov->primary_i2c_slave = OV7xx0_SID; + if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) + return -1; + + if (init_ov_sensor(ov) >= 0) { + PDEBUG(1, "OV7xx0 sensor initalized (method 1)"); + } else { + /* Reset the 76xx */ + if (i2c_w(ov, 0x12, 0x80) < 0) + return -1; + + /* Wait for it to initialize */ + msleep(150); + + i = 0; + success = 0; + while (i <= i2c_detect_tries) { + if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) && + (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) { + success = 1; + break; + } else { + i++; + } + } + +// Was (i == i2c_detect_tries) previously. This obviously used to always report +// success. Whether anyone actually depended on that bug is unknown + if ((i >= i2c_detect_tries) && (success == 0)) { + err("Failed to read sensor ID. You might not have an"); + err("OV7610/20, or it may be not responding. Report"); + err("this to " EMAIL); + err("This is only a warning. You can attempt to use"); + err("your camera anyway"); +// Only issue a warning for now +// return -1; + } else { + PDEBUG(1, "OV7xx0 initialized (method 2, %dx)", i+1); + } + } + + /* Detect sensor (sub)type */ + rc = i2c_r(ov, OV7610_REG_COM_I); + + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } else if ((rc & 3) == 3) { + info("Sensor is an OV7610"); + ov->sensor = SEN_OV7610; + } else if ((rc & 3) == 1) { + /* I don't know what's different about the 76BE yet. */ + if (i2c_r(ov, 0x15) & 1) + info("Sensor is an OV7620AE"); + else + info("Sensor is an OV76BE"); + + /* OV511+ will return all zero isoc data unless we + * configure the sensor as a 7620. Someone needs to + * find the exact reg. setting that causes this. */ + if (ov->bridge == BRG_OV511PLUS) { + info("Enabling 511+/7620AE workaround"); + ov->sensor = SEN_OV7620; + } else { + ov->sensor = SEN_OV76BE; + } + } else if ((rc & 3) == 0) { + info("Sensor is an OV7620"); + ov->sensor = SEN_OV7620; + } else { + err("Unknown image sensor version: %d", rc & 3); + return -1; + } + + if (ov->sensor == SEN_OV7620) { + PDEBUG(4, "Writing 7620 registers"); + if (write_regvals(ov, aRegvalsNorm7620)) + return -1; + } else { + PDEBUG(4, "Writing 7610 registers"); + if (write_regvals(ov, aRegvalsNorm7610)) + return -1; + } + + /* Set sensor-specific vars */ + ov->maxwidth = 640; + ov->maxheight = 480; + ov->minwidth = 64; + ov->minheight = 48; + + // FIXME: These do not match the actual settings yet + ov->brightness = 0x80 << 8; + ov->contrast = 0x80 << 8; + ov->colour = 0x80 << 8; + ov->hue = 0x80 << 8; + + return 0; +} + +/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */ +static int +ov6xx0_configure(struct usb_ov511 *ov) +{ + int rc; + + static struct ov511_regvals aRegvalsNorm6x20[] = { + { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */ + { OV511_I2C_BUS, 0x11, 0x01 }, + { OV511_I2C_BUS, 0x03, 0x60 }, + { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */ + { OV511_I2C_BUS, 0x07, 0xa8 }, + /* The ratio of 0x0c and 0x0d controls the white point */ + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0d, 0x24 }, + { OV511_I2C_BUS, 0x0f, 0x15 }, /* COMS */ + { OV511_I2C_BUS, 0x10, 0x75 }, /* AEC Exposure time */ + { OV511_I2C_BUS, 0x12, 0x24 }, /* Enable AGC */ + { OV511_I2C_BUS, 0x14, 0x04 }, + /* 0x16: 0x06 helps frame stability with moving objects */ + { OV511_I2C_BUS, 0x16, 0x06 }, +// { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */ + { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */ + /* 0x28: 0x05 Selects RGB format if RGB on */ + { OV511_I2C_BUS, 0x28, 0x05 }, + { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ +// { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ + { OV511_I2C_BUS, 0x2d, 0x99 }, + { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */ + { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */ + { OV511_I2C_BUS, 0x38, 0x8b }, + { OV511_I2C_BUS, 0x39, 0x40 }, + + { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */ + { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */ + { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */ + + { OV511_I2C_BUS, 0x3d, 0x80 }, + /* These next two registers (0x4a, 0x4b) are undocumented. They + * control the color balance */ + { OV511_I2C_BUS, 0x4a, 0x80 }, + { OV511_I2C_BUS, 0x4b, 0x80 }, + { OV511_I2C_BUS, 0x4d, 0xd2 }, /* This reduces noise a bit */ + { OV511_I2C_BUS, 0x4e, 0xc1 }, + { OV511_I2C_BUS, 0x4f, 0x04 }, +// Do 50-53 have any effect? +// Toggle 0x12[2] off and on here? + { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */ + }; + + static struct ov511_regvals aRegvalsNorm6x30[] = { + /*OK*/ { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */ + { OV511_I2C_BUS, 0x11, 0x00 }, + /*OK*/ { OV511_I2C_BUS, 0x03, 0x60 }, + /*0A?*/ { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */ + { OV511_I2C_BUS, 0x07, 0xa8 }, + /* The ratio of 0x0c and 0x0d controls the white point */ + /*OK*/ { OV511_I2C_BUS, 0x0c, 0x24 }, + /*OK*/ { OV511_I2C_BUS, 0x0d, 0x24 }, + /*A*/ { OV511_I2C_BUS, 0x0e, 0x20 }, +// /*04?*/ { OV511_I2C_BUS, 0x14, 0x80 }, + { OV511_I2C_BUS, 0x16, 0x03 }, +// /*OK*/ { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */ + // 21 & 22? The suggested values look wrong. Go with default + /*A*/ { OV511_I2C_BUS, 0x23, 0xc0 }, + /*A*/ { OV511_I2C_BUS, 0x25, 0x9a }, // Check this against default +// /*OK*/ { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */ + + /* 0x28: 0x05 Selects RGB format if RGB on */ +// /*04?*/ { OV511_I2C_BUS, 0x28, 0x05 }, +// /*04?*/ { OV511_I2C_BUS, 0x28, 0x45 }, // DEBUG: Tristate UV bus + + /*OK*/ { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ +// /*OK*/ { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ + { OV511_I2C_BUS, 0x2d, 0x99 }, +// /*A*/ { OV511_I2C_BUS, 0x33, 0x26 }, // Reserved bits on 6620 +// /*d2?*/ { OV511_I2C_BUS, 0x34, 0x03 }, /* Max A/D range */ +// /*8b?*/ { OV511_I2C_BUS, 0x38, 0x83 }, +// /*40?*/ { OV511_I2C_BUS, 0x39, 0xc0 }, // 6630 adds bit 7 +// { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */ +// { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */ +// { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */ + { OV511_I2C_BUS, 0x3d, 0x80 }, +// /*A*/ { OV511_I2C_BUS, 0x3f, 0x0e }, + + /* These next two registers (0x4a, 0x4b) are undocumented. They + * control the color balance */ +// /*OK?*/ { OV511_I2C_BUS, 0x4a, 0x80 }, // Check these +// /*OK?*/ { OV511_I2C_BUS, 0x4b, 0x80 }, + { OV511_I2C_BUS, 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */ + /*c1?*/ { OV511_I2C_BUS, 0x4e, 0x40 }, + + /* UV average mode, color killer: strongest */ + { OV511_I2C_BUS, 0x4f, 0x07 }, + + { OV511_I2C_BUS, 0x54, 0x23 }, /* Max AGC gain: 18dB */ + { OV511_I2C_BUS, 0x57, 0x81 }, /* (default) */ + { OV511_I2C_BUS, 0x59, 0x01 }, /* AGC dark current comp: +1 */ + { OV511_I2C_BUS, 0x5a, 0x2c }, /* (undocumented) */ + { OV511_I2C_BUS, 0x5b, 0x0f }, /* AWB chrominance levels */ +// { OV511_I2C_BUS, 0x5c, 0x10 }, + { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */ + }; + + PDEBUG(4, "starting sensor configuration"); + + if (init_ov_sensor(ov) < 0) { + err("Failed to read sensor ID. You might not have an OV6xx0,"); + err("or it may be not responding. Report this to " EMAIL); + return -1; + } else { + PDEBUG(1, "OV6xx0 sensor detected"); + } + + /* Detect sensor (sub)type */ + rc = i2c_r(ov, OV7610_REG_COM_I); + + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } + + if ((rc & 3) == 0) { + ov->sensor = SEN_OV6630; + info("Sensor is an OV6630"); + } else if ((rc & 3) == 1) { + ov->sensor = SEN_OV6620; + info("Sensor is an OV6620"); + } else if ((rc & 3) == 2) { + ov->sensor = SEN_OV6630; + info("Sensor is an OV6630AE"); + } else if ((rc & 3) == 3) { + ov->sensor = SEN_OV6630; + info("Sensor is an OV6630AF"); + } + + /* Set sensor-specific vars */ + ov->maxwidth = 352; + ov->maxheight = 288; + ov->minwidth = 64; + ov->minheight = 48; + + // FIXME: These do not match the actual settings yet + ov->brightness = 0x80 << 8; + ov->contrast = 0x80 << 8; + ov->colour = 0x80 << 8; + ov->hue = 0x80 << 8; + + if (ov->sensor == SEN_OV6620) { + PDEBUG(4, "Writing 6x20 registers"); + if (write_regvals(ov, aRegvalsNorm6x20)) + return -1; + } else { + PDEBUG(4, "Writing 6x30 registers"); + if (write_regvals(ov, aRegvalsNorm6x30)) + return -1; + } + + return 0; +} + +/* This initializes the KS0127 and KS0127B video decoders. */ +static int +ks0127_configure(struct usb_ov511 *ov) +{ + int rc; + +// FIXME: I don't know how to sync or reset it yet +#if 0 + if (ov51x_init_ks_sensor(ov) < 0) { + err("Failed to initialize the KS0127"); + return -1; + } else { + PDEBUG(1, "KS012x(B) sensor detected"); + } +#endif + + /* Detect decoder subtype */ + rc = i2c_r(ov, 0x00); + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } else if (rc & 0x08) { + rc = i2c_r(ov, 0x3d); + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } else if ((rc & 0x0f) == 0) { + info("Sensor is a KS0127"); + ov->sensor = SEN_KS0127; + } else if ((rc & 0x0f) == 9) { + info("Sensor is a KS0127B Rev. A"); + ov->sensor = SEN_KS0127B; + } + } else { + err("Error: Sensor is an unsupported KS0122"); + return -1; + } + + /* Set sensor-specific vars */ + ov->maxwidth = 640; + ov->maxheight = 480; + ov->minwidth = 64; + ov->minheight = 48; + + // FIXME: These do not match the actual settings yet + ov->brightness = 0x80 << 8; + ov->contrast = 0x80 << 8; + ov->colour = 0x80 << 8; + ov->hue = 0x80 << 8; + + /* This device is not supported yet. Bail out now... */ + err("This sensor is not supported yet."); + return -1; + + return 0; +} + +/* This initializes the SAA7111A video decoder. */ +static int +saa7111a_configure(struct usb_ov511 *ov) +{ + int rc; + + /* Since there is no register reset command, all registers must be + * written, otherwise gives erratic results */ + static struct ov511_regvals aRegvalsNormSAA7111A[] = { + { OV511_I2C_BUS, 0x06, 0xce }, + { OV511_I2C_BUS, 0x07, 0x00 }, + { OV511_I2C_BUS, 0x10, 0x44 }, /* YUV422, 240/286 lines */ + { OV511_I2C_BUS, 0x0e, 0x01 }, /* NTSC M or PAL BGHI */ + { OV511_I2C_BUS, 0x00, 0x00 }, + { OV511_I2C_BUS, 0x01, 0x00 }, + { OV511_I2C_BUS, 0x03, 0x23 }, + { OV511_I2C_BUS, 0x04, 0x00 }, + { OV511_I2C_BUS, 0x05, 0x00 }, + { OV511_I2C_BUS, 0x08, 0xc8 }, /* Auto field freq */ + { OV511_I2C_BUS, 0x09, 0x01 }, /* Chrom. trap off, APER=0.25 */ + { OV511_I2C_BUS, 0x0a, 0x80 }, /* BRIG=128 */ + { OV511_I2C_BUS, 0x0b, 0x40 }, /* CONT=1.0 */ + { OV511_I2C_BUS, 0x0c, 0x40 }, /* SATN=1.0 */ + { OV511_I2C_BUS, 0x0d, 0x00 }, /* HUE=0 */ + { OV511_I2C_BUS, 0x0f, 0x00 }, + { OV511_I2C_BUS, 0x11, 0x0c }, + { OV511_I2C_BUS, 0x12, 0x00 }, + { OV511_I2C_BUS, 0x13, 0x00 }, + { OV511_I2C_BUS, 0x14, 0x00 }, + { OV511_I2C_BUS, 0x15, 0x00 }, + { OV511_I2C_BUS, 0x16, 0x00 }, + { OV511_I2C_BUS, 0x17, 0x00 }, + { OV511_I2C_BUS, 0x02, 0xc0 }, /* Composite input 0 */ + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + +// FIXME: I don't know how to sync or reset it yet +#if 0 + if (ov51x_init_saa_sensor(ov) < 0) { + err("Failed to initialize the SAA7111A"); + return -1; + } else { + PDEBUG(1, "SAA7111A sensor detected"); + } +#endif + + /* 640x480 not supported with PAL */ + if (ov->pal) { + ov->maxwidth = 320; + ov->maxheight = 240; /* Even field only */ + } else { + ov->maxwidth = 640; + ov->maxheight = 480; /* Even/Odd fields */ + } + + ov->minwidth = 320; + ov->minheight = 240; /* Even field only */ + + ov->has_decoder = 1; + ov->num_inputs = 8; + ov->norm = VIDEO_MODE_AUTO; + ov->stop_during_set = 0; /* Decoder guarantees stable image */ + + /* Decoder doesn't change these values, so we use these instead of + * acutally reading the registers (which doesn't work) */ + ov->brightness = 0x80 << 8; + ov->contrast = 0x40 << 9; + ov->colour = 0x40 << 9; + ov->hue = 32768; + + PDEBUG(4, "Writing SAA7111A registers"); + if (write_regvals(ov, aRegvalsNormSAA7111A)) + return -1; + + /* Detect version of decoder. This must be done after writing the + * initial regs or the decoder will lock up. */ + rc = i2c_r(ov, 0x00); + + if (rc < 0) { + err("Error detecting sensor version"); + return -1; + } else { + info("Sensor is an SAA7111A (version 0x%x)", rc); + ov->sensor = SEN_SAA7111A; + } + + // FIXME: Fix this for OV518(+) + /* Latch to negative edge of clock. Otherwise, we get incorrect + * colors and jitter in the digital signal. */ + if (ov->bclass == BCL_OV511) + reg_w(ov, 0x11, 0x00); + else + warn("SAA7111A not yet supported with OV518/OV518+"); + + return 0; +} + +/* This initializes the OV511/OV511+ and the sensor */ +static int +ov511_configure(struct usb_ov511 *ov) +{ + static struct ov511_regvals aRegvalsInit511[] = { + { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3d }, + { OV511_DONE_BUS, 0x0, 0x00}, + }; + + static struct ov511_regvals aRegvalsNorm511[] = { + { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R511_FIFO_OPTS, 0x1f }, + { OV511_REG_BUS, R511_COMP_EN, 0x00 }, + { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + static struct ov511_regvals aRegvalsNorm511Plus[] = { + { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0xff }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R511_FIFO_OPTS, 0xff }, + { OV511_REG_BUS, R511_COMP_EN, 0x00 }, + { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + PDEBUG(4, ""); + + ov->customid = reg_r(ov, R511_SYS_CUST_ID); + if (ov->customid < 0) { + err("Unable to read camera bridge registers"); + goto error; + } + + PDEBUG (1, "CustomID = %d", ov->customid); + ov->desc = symbolic(camlist, ov->customid); + info("model: %s", ov->desc); + + if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) { + err("Camera type (%d) not recognized", ov->customid); + err("Please notify " EMAIL " of the name,"); + err("manufacturer, model, and this number of your camera."); + err("Also include the output of the detection process."); + } + + if (ov->customid == 70) /* USB Life TV (PAL/SECAM) */ + ov->pal = 1; + + if (write_regvals(ov, aRegvalsInit511)) + goto error; + + if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 0); + + /* The OV511+ has undocumented bits in the flow control register. + * Setting it to 0xff fixes the corruption with moving objects. */ + if (ov->bridge == BRG_OV511) { + if (write_regvals(ov, aRegvalsNorm511)) + goto error; + } else if (ov->bridge == BRG_OV511PLUS) { + if (write_regvals(ov, aRegvalsNorm511Plus)) + goto error; + } else { + err("Invalid bridge"); + } + + if (ov511_init_compression(ov)) + goto error; + + ov->packet_numbering = 1; + ov511_set_packet_size(ov, 0); + + ov->snap_enabled = snapshot; + + /* Test for 7xx0 */ + PDEBUG(3, "Testing for 0V7xx0"); + ov->primary_i2c_slave = OV7xx0_SID; + if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) + goto error; + + if (i2c_w(ov, 0x12, 0x80) < 0) { + /* Test for 6xx0 */ + PDEBUG(3, "Testing for 0V6xx0"); + ov->primary_i2c_slave = OV6xx0_SID; + if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0) + goto error; + + if (i2c_w(ov, 0x12, 0x80) < 0) { + /* Test for 8xx0 */ + PDEBUG(3, "Testing for 0V8xx0"); + ov->primary_i2c_slave = OV8xx0_SID; + if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0) + goto error; + + if (i2c_w(ov, 0x12, 0x80) < 0) { + /* Test for SAA7111A */ + PDEBUG(3, "Testing for SAA7111A"); + ov->primary_i2c_slave = SAA7111A_SID; + if (ov51x_set_slave_ids(ov, SAA7111A_SID) < 0) + goto error; + + if (i2c_w(ov, 0x0d, 0x00) < 0) { + /* Test for KS0127 */ + PDEBUG(3, "Testing for KS0127"); + ov->primary_i2c_slave = KS0127_SID; + if (ov51x_set_slave_ids(ov, KS0127_SID) < 0) + goto error; + + if (i2c_w(ov, 0x10, 0x00) < 0) { + err("Can't determine sensor slave IDs"); + goto error; + } else { + if (ks0127_configure(ov) < 0) { + err("Failed to configure KS0127"); + goto error; + } + } + } else { + if (saa7111a_configure(ov) < 0) { + err("Failed to configure SAA7111A"); + goto error; + } + } + } else { + err("Detected unsupported OV8xx0 sensor"); + goto error; + } + } else { + if (ov6xx0_configure(ov) < 0) { + err("Failed to configure OV6xx0"); + goto error; + } + } + } else { + if (ov7xx0_configure(ov) < 0) { + err("Failed to configure OV7xx0"); + goto error; + } + } + + return 0; + +error: + err("OV511 Config failed"); + + return -EBUSY; +} + +/* This initializes the OV518/OV518+ and the sensor */ +static int +ov518_configure(struct usb_ov511 *ov) +{ + /* For 518 and 518+ */ + static struct ov511_regvals aRegvalsInit518[] = { + { OV511_REG_BUS, R51x_SYS_RESET, 0x40 }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3e }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x00 }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, 0x46, 0x00 }, + { OV511_REG_BUS, 0x5d, 0x03 }, + { OV511_DONE_BUS, 0x0, 0x00}, + }; + + static struct ov511_regvals aRegvalsNorm518[] = { + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */ + { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */ + { OV511_REG_BUS, 0x31, 0x0f }, + { OV511_REG_BUS, 0x5d, 0x03 }, + { OV511_REG_BUS, 0x24, 0x9f }, + { OV511_REG_BUS, 0x25, 0x90 }, + { OV511_REG_BUS, 0x20, 0x00 }, + { OV511_REG_BUS, 0x51, 0x04 }, + { OV511_REG_BUS, 0x71, 0x19 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + static struct ov511_regvals aRegvalsNorm518Plus[] = { + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */ + { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */ + { OV511_REG_BUS, 0x31, 0x0f }, + { OV511_REG_BUS, 0x5d, 0x03 }, + { OV511_REG_BUS, 0x24, 0x9f }, + { OV511_REG_BUS, 0x25, 0x90 }, + { OV511_REG_BUS, 0x20, 0x60 }, + { OV511_REG_BUS, 0x51, 0x02 }, + { OV511_REG_BUS, 0x71, 0x19 }, + { OV511_REG_BUS, 0x40, 0xff }, + { OV511_REG_BUS, 0x41, 0x42 }, + { OV511_REG_BUS, 0x46, 0x00 }, + { OV511_REG_BUS, 0x33, 0x04 }, + { OV511_REG_BUS, 0x21, 0x19 }, + { OV511_REG_BUS, 0x3f, 0x10 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + PDEBUG(4, ""); + + /* First 5 bits of custom ID reg are a revision ID on OV518 */ + info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID)); + + /* Give it the default description */ + ov->desc = symbolic(camlist, 0); + + if (write_regvals(ov, aRegvalsInit518)) + goto error; + + /* Set LED GPIO pin to output mode */ + if (reg_w_mask(ov, 0x57, 0x00, 0x02) < 0) + goto error; + + /* LED is off by default with OV518; have to explicitly turn it on */ + if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 0); + else + ov51x_led_control(ov, 1); + + /* Don't require compression if dumppix is enabled; otherwise it's + * required. OV518 has no uncompressed mode, to save RAM. */ + if (!dumppix && !ov->compress) { + ov->compress = 1; + warn("Compression required with OV518...enabling"); + } + + if (ov->bridge == BRG_OV518) { + if (write_regvals(ov, aRegvalsNorm518)) + goto error; + } else if (ov->bridge == BRG_OV518PLUS) { + if (write_regvals(ov, aRegvalsNorm518Plus)) + goto error; + } else { + err("Invalid bridge"); + } + + if (reg_w(ov, 0x2f, 0x80) < 0) + goto error; + + if (ov518_init_compression(ov)) + goto error; + + if (ov->bridge == BRG_OV518) + { + struct usb_interface *ifp; + struct usb_host_interface *alt; + __u16 mxps = 0; + + ifp = usb_ifnum_to_if(ov->dev, 0); + if (ifp) { + alt = usb_altnum_to_altsetting(ifp, 7); + if (alt) + mxps = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + } + + /* Some OV518s have packet numbering by default, some don't */ + if (mxps == 897) + ov->packet_numbering = 1; + else + ov->packet_numbering = 0; + } else { + /* OV518+ has packet numbering turned on by default */ + ov->packet_numbering = 1; + } + + ov518_set_packet_size(ov, 0); + + ov->snap_enabled = snapshot; + + /* Test for 76xx */ + ov->primary_i2c_slave = OV7xx0_SID; + if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) + goto error; + + /* The OV518 must be more aggressive about sensor detection since + * I2C write will never fail if the sensor is not present. We have + * to try to initialize the sensor to detect its presence */ + + if (init_ov_sensor(ov) < 0) { + /* Test for 6xx0 */ + ov->primary_i2c_slave = OV6xx0_SID; + if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0) + goto error; + + if (init_ov_sensor(ov) < 0) { + /* Test for 8xx0 */ + ov->primary_i2c_slave = OV8xx0_SID; + if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0) + goto error; + + if (init_ov_sensor(ov) < 0) { + err("Can't determine sensor slave IDs"); + goto error; + } else { + err("Detected unsupported OV8xx0 sensor"); + goto error; + } + } else { + if (ov6xx0_configure(ov) < 0) { + err("Failed to configure OV6xx0"); + goto error; + } + } + } else { + if (ov7xx0_configure(ov) < 0) { + err("Failed to configure OV7xx0"); + goto error; + } + } + + ov->maxwidth = 352; + ov->maxheight = 288; + + // The OV518 cannot go as low as the sensor can + ov->minwidth = 160; + ov->minheight = 120; + + return 0; + +error: + err("OV518 Config failed"); + + return -EBUSY; +} + +/**************************************************************************** + * sysfs + ***************************************************************************/ + +static inline struct usb_ov511 *cd_to_ov(struct class_device *cd) +{ + struct video_device *vdev = to_video_device(cd); + return video_get_drvdata(vdev); +} + +static ssize_t show_custom_id(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%d\n", ov->customid); +} +static CLASS_DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL); + +static ssize_t show_model(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%s\n", ov->desc); +} +static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL); + +static ssize_t show_bridge(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge)); +} +static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL); + +static ssize_t show_sensor(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor)); +} +static CLASS_DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL); + +static ssize_t show_brightness(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_brightness(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); + +static ssize_t show_saturation(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_saturation(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); + +static ssize_t show_contrast(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_contrast(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); + +static ssize_t show_hue(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_hue(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); + +static ssize_t show_exposure(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned char exp = 0; + + if (!ov->dev) + return -ENODEV; + sensor_get_exposure(ov, &exp); + return sprintf(buf, "%d\n", exp >> 8); +} +static CLASS_DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL); + +static void ov_create_sysfs(struct video_device *vdev) +{ + video_device_create_file(vdev, &class_device_attr_custom_id); + video_device_create_file(vdev, &class_device_attr_model); + video_device_create_file(vdev, &class_device_attr_bridge); + video_device_create_file(vdev, &class_device_attr_sensor); + video_device_create_file(vdev, &class_device_attr_brightness); + video_device_create_file(vdev, &class_device_attr_saturation); + video_device_create_file(vdev, &class_device_attr_contrast); + video_device_create_file(vdev, &class_device_attr_hue); + video_device_create_file(vdev, &class_device_attr_exposure); +} + +/**************************************************************************** + * USB routines + ***************************************************************************/ + +static int +ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_interface_descriptor *idesc; + struct usb_ov511 *ov; + int i; + + PDEBUG(1, "probing for device..."); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + idesc = &intf->cur_altsetting->desc; + + if (idesc->bInterfaceClass != 0xFF) + return -ENODEV; + if (idesc->bInterfaceSubClass != 0x00) + return -ENODEV; + + if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) { + err("couldn't kmalloc ov struct"); + goto error_out; + } + + ov->dev = dev; + ov->iface = idesc->bInterfaceNumber; + ov->led_policy = led; + ov->compress = compress; + ov->lightfreq = lightfreq; + ov->num_inputs = 1; /* Video decoder init functs. change this */ + ov->stop_during_set = !fastset; + ov->backlight = backlight; + ov->mirror = mirror; + ov->auto_brt = autobright; + ov->auto_gain = autogain; + ov->auto_exp = autoexp; + + switch (le16_to_cpu(dev->descriptor.idProduct)) { + case PROD_OV511: + ov->bridge = BRG_OV511; + ov->bclass = BCL_OV511; + break; + case PROD_OV511PLUS: + ov->bridge = BRG_OV511PLUS; + ov->bclass = BCL_OV511; + break; + case PROD_OV518: + ov->bridge = BRG_OV518; + ov->bclass = BCL_OV518; + break; + case PROD_OV518PLUS: + ov->bridge = BRG_OV518PLUS; + ov->bclass = BCL_OV518; + break; + case PROD_ME2CAM: + if (le16_to_cpu(dev->descriptor.idVendor) != VEND_MATTEL) + goto error; + ov->bridge = BRG_OV511PLUS; + ov->bclass = BCL_OV511; + break; + default: + err("Unknown product ID 0x%04x", le16_to_cpu(dev->descriptor.idProduct)); + goto error; + } + + info("USB %s video device found", symbolic(brglist, ov->bridge)); + + init_waitqueue_head(&ov->wq); + + mutex_init(&ov->lock); /* to 1 == available */ + mutex_init(&ov->buf_lock); + mutex_init(&ov->i2c_lock); + mutex_init(&ov->cbuf_lock); + + ov->buf_state = BUF_NOT_ALLOCATED; + + if (usb_make_path(dev, ov->usb_path, OV511_USB_PATH_LEN) < 0) { + err("usb_make_path error"); + goto error; + } + + /* Allocate control transfer buffer. */ + /* Must be kmalloc()'ed, for DMA compatibility */ + ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL); + if (!ov->cbuf) + goto error; + + if (ov->bclass == BCL_OV518) { + if (ov518_configure(ov) < 0) + goto error; + } else { + if (ov511_configure(ov) < 0) + goto error; + } + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].framenum = i; + init_waitqueue_head(&ov->frame[i].wq); + } + + for (i = 0; i < OV511_NUMSBUF; i++) { + ov->sbuf[i].ov = ov; + spin_lock_init(&ov->sbuf[i].lock); + ov->sbuf[i].n = i; + } + + /* Unnecessary? (This is done on open(). Need to make sure variables + * are properly initialized without this before removing it, though). */ + if (ov51x_set_default_params(ov) < 0) + goto error; + +#ifdef OV511_DEBUG + if (dump_bridge) { + if (ov->bclass == BCL_OV511) + ov511_dump_regs(ov); + else + ov518_dump_regs(ov); + } +#endif + + ov->vdev = video_device_alloc(); + if (!ov->vdev) + goto error; + + memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev)); + ov->vdev->dev = &dev->dev; + video_set_drvdata(ov->vdev, ov); + + for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) { + /* Minor 0 cannot be specified; assume user wants autodetect */ + if (unit_video[i] == 0) + break; + + if (video_register_device(ov->vdev, VFL_TYPE_GRABBER, + unit_video[i]) >= 0) { + break; + } + } + + /* Use the next available one */ + if ((ov->vdev->minor == -1) && + video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) { + err("video_register_device failed"); + goto error; + } + + info("Device at %s registered to minor %d", ov->usb_path, + ov->vdev->minor); + + usb_set_intfdata(intf, ov); + ov_create_sysfs(ov->vdev); + return 0; + +error: + if (ov->vdev) { + if (-1 == ov->vdev->minor) + video_device_release(ov->vdev); + else + video_unregister_device(ov->vdev); + ov->vdev = NULL; + } + + if (ov->cbuf) { + mutex_lock(&ov->cbuf_lock); + kfree(ov->cbuf); + ov->cbuf = NULL; + mutex_unlock(&ov->cbuf_lock); + } + + kfree(ov); + ov = NULL; + +error_out: + err("Camera initialization failed"); + return -EIO; +} + +static void +ov51x_disconnect(struct usb_interface *intf) +{ + struct usb_ov511 *ov = usb_get_intfdata(intf); + int n; + + PDEBUG(3, ""); + + usb_set_intfdata (intf, NULL); + + if (!ov) + return; + + if (ov->vdev) + video_unregister_device(ov->vdev); + + for (n = 0; n < OV511_NUMFRAMES; n++) + ov->frame[n].grabstate = FRAME_ERROR; + + ov->curframe = -1; + + /* This will cause the process to request another frame */ + for (n = 0; n < OV511_NUMFRAMES; n++) + wake_up_interruptible(&ov->frame[n].wq); + + wake_up_interruptible(&ov->wq); + + ov->streaming = 0; + ov51x_unlink_isoc(ov); + + ov->dev = NULL; + + /* Free the memory */ + if (ov && !ov->user) { + mutex_lock(&ov->cbuf_lock); + kfree(ov->cbuf); + ov->cbuf = NULL; + mutex_unlock(&ov->cbuf_lock); + + ov51x_dealloc(ov); + kfree(ov); + ov = NULL; + } + + PDEBUG(3, "Disconnect complete"); +} + +static struct usb_driver ov511_driver = { + .name = "ov511", + .id_table = device_table, + .probe = ov51x_probe, + .disconnect = ov51x_disconnect +}; + +/**************************************************************************** + * + * Module routines + * + ***************************************************************************/ + +static int __init +usb_ov511_init(void) +{ + int retval; + + retval = usb_register(&ov511_driver); + if (retval) + goto out; + + info(DRIVER_VERSION " : " DRIVER_DESC); + +out: + return retval; +} + +static void __exit +usb_ov511_exit(void) +{ + usb_deregister(&ov511_driver); + info("driver deregistered"); + +} + +module_init(usb_ov511_init); +module_exit(usb_ov511_exit); + diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h new file mode 100644 index 00000000000..bce9b363388 --- /dev/null +++ b/drivers/media/video/ov511.h @@ -0,0 +1,568 @@ +#ifndef __LINUX_OV511_H +#define __LINUX_OV511_H + +#include <asm/uaccess.h> +#include <linux/videodev.h> +#include <linux/smp_lock.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +#define OV511_DEBUG /* Turn on debug messages */ + +#ifdef OV511_DEBUG + #define PDEBUG(level, fmt, args...) \ + if (debug >= (level)) info("[%s:%d] " fmt, \ + __FUNCTION__, __LINE__ , ## args) +#else + #define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +/* This macro restricts an int variable to an inclusive range */ +#define RESTRICT_TO_RANGE(v,mi,ma) { \ + if ((v) < (mi)) (v) = (mi); \ + else if ((v) > (ma)) (v) = (ma); \ +} + +/* --------------------------------- */ +/* DEFINES FOR OV511 AND OTHER CHIPS */ +/* --------------------------------- */ + +/* USB IDs */ +#define VEND_OMNIVISION 0x05A9 +#define PROD_OV511 0x0511 +#define PROD_OV511PLUS 0xA511 +#define PROD_OV518 0x0518 +#define PROD_OV518PLUS 0xA518 + +#define VEND_MATTEL 0x0813 +#define PROD_ME2CAM 0x0002 + +/* --------------------------------- */ +/* OV51x REGISTER MNEMONICS */ +/* --------------------------------- */ + +/* Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +/* Snapshot mode camera interface register numbers */ +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +/* DRAM register numbers */ +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_DRAM_ARCP 0x21 +#define R511_DRAM_MRC 0x22 +#define R511_DRAM_RFC 0x23 + +/* ISO FIFO register numbers */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ +#define R511_FIFO_OPTS 0x31 + +/* Parallel IO register numbers */ +#define R511_PIO_OPTS 0x38 +#define R511_PIO_DATA 0x39 +#define R511_PIO_BIST 0x3E +#define R518_GPIO_IN 0x55 /* OV518(+) only */ +#define R518_GPIO_OUT 0x56 /* OV518(+) only */ +#define R518_GPIO_CTL 0x57 /* OV518(+) only */ +#define R518_GPIO_PULSE_IN 0x58 /* OV518(+) only */ +#define R518_GPIO_PULSE_CLEAR 0x59 /* OV518(+) only */ +#define R518_GPIO_PULSE_POL 0x5a /* OV518(+) only */ +#define R518_GPIO_PULSE_EN 0x5b /* OV518(+) only */ +#define R518_GPIO_RESET 0x5c /* OV518(+) only */ + +/* I2C registers */ +#define R511_I2C_CTL 0x40 +#define R518_I2C_CTL 0x47 /* OV518(+) only */ +#define R51x_I2C_W_SID 0x41 +#define R51x_I2C_SADDR_3 0x42 +#define R51x_I2C_SADDR_2 0x43 +#define R51x_I2C_R_SID 0x44 +#define R51x_I2C_DATA 0x45 +#define R51x_I2C_CLOCK 0x46 +#define R51x_I2C_TIMEOUT 0x47 + +/* I2C snapshot registers */ +#define R511_SI2C_SADDR_3 0x48 +#define R511_SI2C_DATA 0x49 + +/* System control registers */ +#define R51x_SYS_RESET 0x50 + /* Reset type definitions */ +#define OV511_RESET_UDC 0x01 +#define OV511_RESET_I2C 0x02 +#define OV511_RESET_FIFO 0x04 +#define OV511_RESET_OMNICE 0x08 +#define OV511_RESET_DRAM 0x10 +#define OV511_RESET_CAM_INT 0x20 +#define OV511_RESET_OV511 0x40 +#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */ +#define OV511_RESET_ALL 0x7F + +#define R511_SYS_CLOCK_DIV 0x51 +#define R51x_SYS_SNAP 0x52 +#define R51x_SYS_INIT 0x53 +#define R511_SYS_PWR_CLK 0x54 /* OV511+/OV518(+) only */ +#define R511_SYS_LED_CTL 0x55 /* OV511+ only */ +#define R511_SYS_USER 0x5E +#define R511_SYS_CUST_ID 0x5F + +/* OmniCE (compression) registers */ +#define R511_COMP_PHY 0x70 +#define R511_COMP_PHUV 0x71 +#define R511_COMP_PVY 0x72 +#define R511_COMP_PVUV 0x73 +#define R511_COMP_QHY 0x74 +#define R511_COMP_QHUV 0x75 +#define R511_COMP_QVY 0x76 +#define R511_COMP_QVUV 0x77 +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 +#define R511_COMP_LUT_BEGIN 0x80 + +/* --------------------------------- */ +/* ALTERNATE NUMBERS */ +/* --------------------------------- */ + +/* Alternate numbers for various max packet sizes (OV511 only) */ +#define OV511_ALT_SIZE_992 0 +#define OV511_ALT_SIZE_993 1 +#define OV511_ALT_SIZE_768 2 +#define OV511_ALT_SIZE_769 3 +#define OV511_ALT_SIZE_512 4 +#define OV511_ALT_SIZE_513 5 +#define OV511_ALT_SIZE_257 6 +#define OV511_ALT_SIZE_0 7 + +/* Alternate numbers for various max packet sizes (OV511+ only) */ +#define OV511PLUS_ALT_SIZE_0 0 +#define OV511PLUS_ALT_SIZE_33 1 +#define OV511PLUS_ALT_SIZE_129 2 +#define OV511PLUS_ALT_SIZE_257 3 +#define OV511PLUS_ALT_SIZE_385 4 +#define OV511PLUS_ALT_SIZE_513 5 +#define OV511PLUS_ALT_SIZE_769 6 +#define OV511PLUS_ALT_SIZE_961 7 + +/* Alternate numbers for various max packet sizes (OV518(+) only) */ +#define OV518_ALT_SIZE_0 0 +#define OV518_ALT_SIZE_128 1 +#define OV518_ALT_SIZE_256 2 +#define OV518_ALT_SIZE_384 3 +#define OV518_ALT_SIZE_512 4 +#define OV518_ALT_SIZE_640 5 +#define OV518_ALT_SIZE_768 6 +#define OV518_ALT_SIZE_896 7 + +/* --------------------------------- */ +/* OV7610 REGISTER MNEMONICS */ +/* --------------------------------- */ + +/* OV7610 registers */ +#define OV7610_REG_GAIN 0x00 /* gain setting (5:0) */ +#define OV7610_REG_BLUE 0x01 /* blue channel balance */ +#define OV7610_REG_RED 0x02 /* red channel balance */ +#define OV7610_REG_SAT 0x03 /* saturation */ + /* 04 reserved */ +#define OV7610_REG_CNT 0x05 /* Y contrast */ +#define OV7610_REG_BRT 0x06 /* Y brightness */ + /* 08-0b reserved */ +#define OV7610_REG_BLUE_BIAS 0x0C /* blue channel bias (5:0) */ +#define OV7610_REG_RED_BIAS 0x0D /* read channel bias (5:0) */ +#define OV7610_REG_GAMMA_COEFF 0x0E /* gamma settings */ +#define OV7610_REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */ +#define OV7610_REG_EXP 0x10 /* manual exposure setting */ +#define OV7610_REG_CLOCK 0x11 /* polarity/clock prescaler */ +#define OV7610_REG_COM_A 0x12 /* misc common regs */ +#define OV7610_REG_COM_B 0x13 /* misc common regs */ +#define OV7610_REG_COM_C 0x14 /* misc common regs */ +#define OV7610_REG_COM_D 0x15 /* misc common regs */ +#define OV7610_REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */ +#define OV7610_REG_HWIN_START 0x17 /* horizontal window start */ +#define OV7610_REG_HWIN_END 0x18 /* horizontal window end */ +#define OV7610_REG_VWIN_START 0x19 /* vertical window start */ +#define OV7610_REG_VWIN_END 0x1A /* vertical window end */ +#define OV7610_REG_PIXEL_SHIFT 0x1B /* pixel shift */ +#define OV7610_REG_ID_HIGH 0x1C /* manufacturer ID MSB */ +#define OV7610_REG_ID_LOW 0x1D /* manufacturer ID LSB */ + /* 0e-0f reserved */ +#define OV7610_REG_COM_E 0x20 /* misc common regs */ +#define OV7610_REG_YOFFSET 0x21 /* Y channel offset */ +#define OV7610_REG_UOFFSET 0x22 /* U channel offset */ + /* 23 reserved */ +#define OV7610_REG_ECW 0x24 /* Exposure white level for AEC */ +#define OV7610_REG_ECB 0x25 /* Exposure black level for AEC */ +#define OV7610_REG_COM_F 0x26 /* misc settings */ +#define OV7610_REG_COM_G 0x27 /* misc settings */ +#define OV7610_REG_COM_H 0x28 /* misc settings */ +#define OV7610_REG_COM_I 0x29 /* misc settings */ +#define OV7610_REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */ +#define OV7610_REG_FRAMERATE_L 0x2B /* frame rate LSB */ +#define OV7610_REG_ALC 0x2C /* Auto Level Control settings */ +#define OV7610_REG_COM_J 0x2D /* misc settings */ +#define OV7610_REG_VOFFSET 0x2E /* V channel offset adjustment */ +#define OV7610_REG_ARRAY_BIAS 0x2F /* Array bias -- don't change */ + /* 30-32 reserved */ +#define OV7610_REG_YGAMMA 0x33 /* misc gamma settings (7:6) */ +#define OV7610_REG_BIAS_ADJUST 0x34 /* misc bias settings */ +#define OV7610_REG_COM_L 0x35 /* misc settings */ + /* 36-37 reserved */ +#define OV7610_REG_COM_K 0x38 /* misc registers */ + +/* --------------------------------- */ +/* I2C ADDRESSES */ +/* --------------------------------- */ + +#define OV7xx0_SID 0x42 +#define OV6xx0_SID 0xC0 +#define OV8xx0_SID 0xA0 +#define KS0127_SID 0xD8 +#define SAA7111A_SID 0x48 + +/* --------------------------------- */ +/* MISCELLANEOUS DEFINES */ +/* --------------------------------- */ + +#define I2C_CLOCK_PRESCALER 0x03 + +#define FRAMES_PER_DESC 10 /* FIXME - What should this be? */ +#define MAX_FRAME_SIZE_PER_DESC 993 /* For statically allocated stuff */ +#define PIXELS_PER_SEG 256 /* Pixels per segment */ + +#define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */ + +#define OV511_NUMFRAMES 2 +#if OV511_NUMFRAMES > VIDEO_MAX_FRAME + #error "OV511_NUMFRAMES is too high" +#endif + +#define OV511_NUMSBUF 2 + +/* Control transfers use up to 4 bytes */ +#define OV511_CBUF_SIZE 4 + +/* Size of usb_make_path() buffer */ +#define OV511_USB_PATH_LEN 64 + +/* Bridge types */ +enum { + BRG_UNKNOWN, + BRG_OV511, + BRG_OV511PLUS, + BRG_OV518, + BRG_OV518PLUS, +}; + +/* Bridge classes */ +enum { + BCL_UNKNOWN, + BCL_OV511, + BCL_OV518, +}; + +/* Sensor types */ +enum { + SEN_UNKNOWN, + SEN_OV76BE, + SEN_OV7610, + SEN_OV7620, + SEN_OV7620AE, + SEN_OV6620, + SEN_OV6630, + SEN_OV6630AE, + SEN_OV6630AF, + SEN_OV8600, + SEN_KS0127, + SEN_KS0127B, + SEN_SAA7111A, +}; + +enum { + STATE_SCANNING, /* Scanning for start */ + STATE_HEADER, /* Parsing header */ + STATE_LINES, /* Parsing lines */ +}; + +/* Buffer states */ +enum { + BUF_NOT_ALLOCATED, + BUF_ALLOCATED, +}; + +/* --------- Definition of ioctl interface --------- */ + +#define OV511_INTERFACE_VER 101 + +/* LED options */ +enum { + LED_OFF, + LED_ON, + LED_AUTO, +}; + +/* Raw frame formats */ +enum { + RAWFMT_INVALID, + RAWFMT_YUV400, + RAWFMT_YUV420, + RAWFMT_YUV422, + RAWFMT_GBR422, +}; + +struct ov511_i2c_struct { + unsigned char slave; /* Write slave ID (read ID - 1) */ + unsigned char reg; /* Index of register */ + unsigned char value; /* User sets this w/ write, driver does w/ read */ + unsigned char mask; /* Bits to be changed. Not used with read ops */ +}; + +/* ioctls */ +#define OV511IOC_WI2C _IOW('v', BASE_VIDIOCPRIVATE + 5, \ + struct ov511_i2c_struct) +#define OV511IOC_RI2C _IOWR('v', BASE_VIDIOCPRIVATE + 6, \ + struct ov511_i2c_struct) +/* ------------- End IOCTL interface -------------- */ + +struct usb_ov511; /* Forward declaration */ + +struct ov511_sbuf { + struct usb_ov511 *ov; + unsigned char *data; + struct urb *urb; + spinlock_t lock; + int n; +}; + +enum { + FRAME_UNUSED, /* Unused (no MCAPTURE) */ + FRAME_READY, /* Ready to start grabbing */ + FRAME_GRABBING, /* In the process of being grabbed into */ + FRAME_DONE, /* Finished grabbing, but not been synced yet */ + FRAME_ERROR, /* Something bad happened while processing */ +}; + +struct ov511_regvals { + enum { + OV511_DONE_BUS, + OV511_REG_BUS, + OV511_I2C_BUS, + } bus; + unsigned char reg; + unsigned char val; +}; + +struct ov511_frame { + int framenum; /* Index of this frame */ + unsigned char *data; /* Frame buffer */ + unsigned char *tempdata; /* Temp buffer for multi-stage conversions */ + unsigned char *rawdata; /* Raw camera data buffer */ + unsigned char *compbuf; /* Temp buffer for decompressor */ + + int depth; /* Bytes per pixel */ + int width; /* Width application is expecting */ + int height; /* Height application is expecting */ + + int rawwidth; /* Actual width of frame sent from camera */ + int rawheight; /* Actual height of frame sent from camera */ + + int sub_flag; /* Sub-capture mode for this frame? */ + unsigned int format; /* Format for this frame */ + int compressed; /* Is frame compressed? */ + + volatile int grabstate; /* State of grabbing */ + int scanstate; /* State of scanning */ + + int bytes_recvd; /* Number of image bytes received from camera */ + + long bytes_read; /* Amount that has been read() */ + + wait_queue_head_t wq; /* Processes waiting */ + + int snapshot; /* True if frame was a snapshot */ +}; + +#define DECOMP_INTERFACE_VER 4 + +/* Compression module operations */ +struct ov51x_decomp_ops { + int (*decomp_400)(unsigned char *, unsigned char *, unsigned char *, + int, int, int); + int (*decomp_420)(unsigned char *, unsigned char *, unsigned char *, + int, int, int); + int (*decomp_422)(unsigned char *, unsigned char *, unsigned char *, + int, int, int); + struct module *owner; +}; + +struct usb_ov511 { + struct video_device *vdev; + struct usb_device *dev; + + int customid; + char *desc; + unsigned char iface; + char usb_path[OV511_USB_PATH_LEN]; + + /* Determined by sensor type */ + int maxwidth; + int maxheight; + int minwidth; + int minheight; + + int brightness; + int colour; + int contrast; + int hue; + int whiteness; + int exposure; + int auto_brt; /* Auto brightness enabled flag */ + int auto_gain; /* Auto gain control enabled flag */ + int auto_exp; /* Auto exposure enabled flag */ + int backlight; /* Backlight exposure algorithm flag */ + int mirror; /* Image is reversed horizontally */ + + int led_policy; /* LED: off|on|auto; OV511+ only */ + + struct mutex lock; /* Serializes user-accessible operations */ + int user; /* user count for exclusive use */ + + int streaming; /* Are we streaming Isochronous? */ + int grabbing; /* Are we grabbing? */ + + int compress; /* Should the next frame be compressed? */ + int compress_inited; /* Are compression params uploaded? */ + + int lightfreq; /* Power (lighting) frequency */ + int bandfilt; /* Banding filter enabled flag */ + + unsigned char *fbuf; /* Videodev buffer area */ + unsigned char *tempfbuf; /* Temporary (intermediate) buffer area */ + unsigned char *rawfbuf; /* Raw camera data buffer area */ + + int sub_flag; /* Pix Array subcapture on flag */ + int subx; /* Pix Array subcapture x offset */ + int suby; /* Pix Array subcapture y offset */ + int subw; /* Pix Array subcapture width */ + int subh; /* Pix Array subcapture height */ + + int curframe; /* Current receiving sbuf */ + struct ov511_frame frame[OV511_NUMFRAMES]; + + struct ov511_sbuf sbuf[OV511_NUMSBUF]; + + wait_queue_head_t wq; /* Processes waiting */ + + int snap_enabled; /* Snapshot mode enabled */ + + int bridge; /* Type of bridge (BRG_*) */ + int bclass; /* Class of bridge (BCL_*) */ + int sensor; /* Type of image sensor chip (SEN_*) */ + + int packet_size; /* Frame size per isoc desc */ + int packet_numbering; /* Is ISO frame numbering enabled? */ + + /* Framebuffer/sbuf management */ + int buf_state; + struct mutex buf_lock; + + struct ov51x_decomp_ops *decomp_ops; + + /* Stop streaming while changing picture settings */ + int stop_during_set; + + int stopped; /* Streaming is temporarily paused */ + + /* Video decoder stuff */ + int input; /* Composite, S-VIDEO, etc... */ + int num_inputs; /* Number of inputs */ + int norm; /* NTSC / PAL / SECAM */ + int has_decoder; /* Device has a video decoder */ + int pal; /* Device is designed for PAL resolution */ + + /* I2C interface */ + struct mutex i2c_lock; /* Protect I2C controller regs */ + unsigned char primary_i2c_slave; /* I2C write id of sensor */ + + /* Control transaction stuff */ + unsigned char *cbuf; /* Buffer for payload */ + struct mutex cbuf_lock; +}; + +/* Used to represent a list of values and their respective symbolic names */ +struct symbolic_list { + int num; + char *name; +}; + +#define NOT_DEFINED_STR "Unknown" + +/* Returns the name of the matching element in the symbolic_list array. The + * end of the list must be marked with an element that has a NULL name. + */ +static inline char * +symbolic(struct symbolic_list list[], int num) +{ + int i; + + for (i = 0; list[i].name != NULL; i++) + if (list[i].num == num) + return (list[i].name); + + return (NOT_DEFINED_STR); +} + +/* Compression stuff */ + +#define OV511_QUANTABLESIZE 64 +#define OV518_QUANTABLESIZE 32 + +#define OV511_YQUANTABLE { \ + 0, 1, 1, 2, 2, 3, 3, 4, \ + 1, 1, 1, 2, 2, 3, 4, 4, \ + 1, 1, 2, 2, 3, 4, 4, 4, \ + 2, 2, 2, 3, 4, 4, 4, 4, \ + 2, 2, 3, 4, 4, 5, 5, 5, \ + 3, 3, 4, 4, 5, 5, 5, 5, \ + 3, 4, 4, 4, 5, 5, 5, 5, \ + 4, 4, 4, 4, 5, 5, 5, 5 \ +} + +#define OV511_UVQUANTABLE { \ + 0, 2, 2, 3, 4, 4, 4, 4, \ + 2, 2, 2, 4, 4, 4, 4, 4, \ + 2, 2, 3, 4, 4, 4, 4, 4, \ + 3, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4 \ +} + +#define OV518_YQUANTABLE { \ + 5, 4, 5, 6, 6, 7, 7, 7, \ + 5, 5, 5, 5, 6, 7, 7, 7, \ + 6, 6, 6, 6, 7, 7, 7, 8, \ + 7, 7, 6, 7, 7, 7, 8, 8 \ +} + +#define OV518_UVQUANTABLE { \ + 6, 6, 6, 7, 7, 7, 7, 7, \ + 6, 6, 6, 7, 7, 7, 7, 7, \ + 6, 6, 6, 7, 7, 7, 7, 8, \ + 7, 7, 7, 7, 7, 7, 8, 8 \ +} + +#endif diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile new file mode 100644 index 00000000000..2d93a775011 --- /dev/null +++ b/drivers/media/video/pwc/Makefile @@ -0,0 +1,20 @@ +ifneq ($(KERNELRELEASE),) + +pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o + +obj-$(CONFIG_USB_PWC) += pwc.o + +else + +KDIR := /lib/modules/$(shell uname -r)/build +PWD := $(shell pwd) + +default: + $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules + +endif + +clean: + rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c + rm -rf .tmp_versions + diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt new file mode 100644 index 00000000000..04a640d723e --- /dev/null +++ b/drivers/media/video/pwc/philips.txt @@ -0,0 +1,236 @@ +This file contains some additional information for the Philips and OEM webcams. +E-mail: webcam@smcc.demon.nl Last updated: 2004-01-19 +Site: http://www.smcc.demon.nl/webcam/ + +As of this moment, the following cameras are supported: + * Philips PCA645 + * Philips PCA646 + * Philips PCVC675 + * Philips PCVC680 + * Philips PCVC690 + * Philips PCVC720/40 + * Philips PCVC730 + * Philips PCVC740 + * Philips PCVC750 + * Askey VC010 + * Creative Labs Webcam 5 + * Creative Labs Webcam Pro Ex + * Logitech QuickCam 3000 Pro + * Logitech QuickCam 4000 Pro + * Logitech QuickCam Notebook Pro + * Logitech QuickCam Zoom + * Logitech QuickCam Orbit + * Logitech QuickCam Sphere + * Samsung MPC-C10 + * Samsung MPC-C30 + * Sotec Afina Eye + * AME CU-001 + * Visionite VCS-UM100 + * Visionite VCS-UC300 + +The main webpage for the Philips driver is at the address above. It contains +a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin +contains decompression routines that allow you to use higher image sizes and +framerates; in addition the webcam uses less bandwidth on the USB bus (handy +if you want to run more than 1 camera simultaneously). These routines fall +under a NDA, and may therefor not be distributed as source; however, its use +is completely optional. + +You can build this code either into your kernel, or as a module. I recommend +the latter, since it makes troubleshooting a lot easier. The built-in +microphone is supported through the USB Audio class. + +When you load the module you can set some default settings for the +camera; some programs depend on a particular image-size or -format and +don't know how to set it properly in the driver. The options are: + +size + Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or + 'vga', for an image size of resp. 128x96, 160x120, 176x144, + 320x240, 352x288 and 640x480 (of course, only for those cameras that + support these resolutions). + +fps + Specifies the desired framerate. Is an integer in the range of 4-30. + +fbufs + This paramter specifies the number of internal buffers to use for storing + frames from the cam. This will help if the process that reads images from + the cam is a bit slow or momentarely busy. However, on slow machines it + only introduces lag, so choose carefully. The default is 3, which is + reasonable. You can set it between 2 and 5. + +mbufs + This is an integer between 1 and 10. It will tell the module the number of + buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends. + The default is 2, which is adequate for most applications (double + buffering). + + Should you experience a lot of 'Dumping frame...' messages during + grabbing with a tool that uses mmap(), you might want to increase if. + However, it doesn't really buffer images, it just gives you a bit more + slack when your program is behind. But you need a multi-threaded or + forked program to really take advantage of these buffers. + + The absolute maximum is 10, but don't set it too high! Every buffer takes + up 460 KB of RAM, so unless you have a lot of memory setting this to + something more than 4 is an absolute waste. This memory is only + allocated during open(), so nothing is wasted when the camera is not in + use. + +power_save + When power_save is enabled (set to 1), the module will try to shut down + the cam on close() and re-activate on open(). This will save power and + turn off the LED. Not all cameras support this though (the 645 and 646 + don't have power saving at all), and some models don't work either (they + will shut down, but never wake up). Consider this experimental. By + default this option is disabled. + +compression (only useful with the plugin) + With this option you can control the compression factor that the camera + uses to squeeze the image through the USB bus. You can set the + parameter between 0 and 3: + 0 = prefer uncompressed images; if the requested mode is not available + in an uncompressed format, the driver will silently switch to low + compression. + 1 = low compression. + 2 = medium compression. + 3 = high compression. + + High compression takes less bandwidth of course, but it could also + introduce some unwanted artefacts. The default is 2, medium compression. + See the FAQ on the website for an overview of which modes require + compression. + + The compression parameter does not apply to the 645 and 646 cameras + and OEM models derived from those (only a few). Most cams honour this + parameter. + +leds + This settings takes 2 integers, that define the on/off time for the LED + (in milliseconds). One of the interesting things that you can do with + this is let the LED blink while the camera is in use. This: + + leds=500,500 + + will blink the LED once every second. But with: + + leds=0,0 + + the LED never goes on, making it suitable for silent surveillance. + + By default the camera's LED is on solid while in use, and turned off + when the camera is not used anymore. + + This parameter works only with the ToUCam range of cameras (720, 730, 740, + 750) and OEMs. For other cameras this command is silently ignored, and + the LED cannot be controlled. + + Finally: this parameters does not take effect UNTIL the first time you + open the camera device. Until then, the LED remains on. + +dev_hint + A long standing problem with USB devices is their dynamic nature: you + never know what device a camera gets assigned; it depends on module load + order, the hub configuration, the order in which devices are plugged in, + and the phase of the moon (i.e. it can be random). With this option you + can give the driver a hint as to what video device node (/dev/videoX) it + should use with a specific camera. This is also handy if you have two + cameras of the same model. + + A camera is specified by its type (the number from the camera model, + like PCA645, PCVC750VC, etc) and optionally the serial number (visible + in /proc/bus/usb/devices). A hint consists of a string with the following + format: + + [type[.serialnumber]:]node + + The square brackets mean that both the type and the serialnumber are + optional, but a serialnumber cannot be specified without a type (which + would be rather pointless). The serialnumber is separated from the type + by a '.'; the node number by a ':'. + + This somewhat cryptic syntax is best explained by a few examples: + + dev_hint=3,5 The first detected cam gets assigned + /dev/video3, the second /dev/video5. Any + other cameras will get the first free + available slot (see below). + + dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1, + and a PCVC680 /dev/video2. + + dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber + 0123 goes to /dev/video3, the same + camera model with the 4567 serial + gets /dev/video0. + + dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the + next 3 Philips cams will use /dev/video4 + through /dev/video6. + + Some points worth knowing: + - Serialnumbers are case sensitive and must be written full, including + leading zeroes (it's treated as a string). + - If a device node is already occupied, registration will fail and + the webcam is not available. + - You can have up to 64 video devices; be sure to make enough device + nodes in /dev if you want to spread the numbers (this does not apply + to devfs). After /dev/video9 comes /dev/video10 (not /dev/videoA). + - If a camera does not match any dev_hint, it will simply get assigned + the first available device node, just as it used to be. + +trace + In order to better detect problems, it is now possible to turn on a + 'trace' of some of the calls the module makes; it logs all items in your + kernel log at debug level. + + The trace variable is a bitmask; each bit represents a certain feature. + If you want to trace something, look up the bit value(s) in the table + below, add the values together and supply that to the trace variable. + + Value Value Description Default + (dec) (hex) + 1 0x1 Module initialization; this will log messages On + while loading and unloading the module + + 2 0x2 probe() and disconnect() traces On + + 4 0x4 Trace open() and close() calls Off + + 8 0x8 read(), mmap() and associated ioctl() calls Off + + 16 0x10 Memory allocation of buffers, etc. Off + + 32 0x20 Showing underflow, overflow and Dumping frame On + messages + + 64 0x40 Show viewport and image sizes Off + + 128 0x80 PWCX debugging Off + + For example, to trace the open() & read() fuctions, sum 8 + 4 = 12, + so you would supply trace=12 during insmod or modprobe. If + you want to turn the initialization and probing tracing off, set trace=0. + The default value for trace is 35 (0x23). + + + +Example: + + # modprobe pwc size=cif fps=15 power_save=1 + +The fbufs, mbufs and trace parameters are global and apply to all connected +cameras. Each camera has its own set of buffers. + +size and fps only specify defaults when you open() the device; this is to +accommodate some tools that don't set the size. You can change these +settings after open() with the Video4Linux ioctl() calls. The default of +defaults is QCIF size at 10 fps. + +The compression parameter is semiglobal; it sets the initial compression +preference for all camera's, but this parameter can be set per camera with +the VIDIOCPWCSCQUAL ioctl() call. + +All parameters are optional. + diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c new file mode 100644 index 00000000000..0398b812e0c --- /dev/null +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -0,0 +1,1541 @@ +/* Driver for Philips webcam + Functions that send various control messages to the webcam, including + video modes. + (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* + Changes + 2001/08/03 Alvarado Added methods for changing white balance and + red/green gains + */ + +/* Control functions for the cam; brightness, contrast, video mode, etc. */ + +#ifdef __KERNEL__ +#include <asm/uaccess.h> +#endif +#include <asm/errno.h> + +#include "pwc.h" +#include "pwc-ioctl.h" +#include "pwc-uncompress.h" +#include "pwc-kiara.h" +#include "pwc-timon.h" + +/* Request types: video */ +#define SET_LUM_CTL 0x01 +#define GET_LUM_CTL 0x02 +#define SET_CHROM_CTL 0x03 +#define GET_CHROM_CTL 0x04 +#define SET_STATUS_CTL 0x05 +#define GET_STATUS_CTL 0x06 +#define SET_EP_STREAM_CTL 0x07 +#define GET_EP_STREAM_CTL 0x08 +#define SET_MPT_CTL 0x0D +#define GET_MPT_CTL 0x0E + +/* Selectors for the Luminance controls [GS]ET_LUM_CTL */ +#define AGC_MODE_FORMATTER 0x2000 +#define PRESET_AGC_FORMATTER 0x2100 +#define SHUTTER_MODE_FORMATTER 0x2200 +#define PRESET_SHUTTER_FORMATTER 0x2300 +#define PRESET_CONTOUR_FORMATTER 0x2400 +#define AUTO_CONTOUR_FORMATTER 0x2500 +#define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600 +#define CONTRAST_FORMATTER 0x2700 +#define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800 +#define FLICKERLESS_MODE_FORMATTER 0x2900 +#define AE_CONTROL_SPEED 0x2A00 +#define BRIGHTNESS_FORMATTER 0x2B00 +#define GAMMA_FORMATTER 0x2C00 + +/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */ +#define WB_MODE_FORMATTER 0x1000 +#define AWB_CONTROL_SPEED_FORMATTER 0x1100 +#define AWB_CONTROL_DELAY_FORMATTER 0x1200 +#define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300 +#define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400 +#define COLOUR_MODE_FORMATTER 0x1500 +#define SATURATION_MODE_FORMATTER1 0x1600 +#define SATURATION_MODE_FORMATTER2 0x1700 + +/* Selectors for the Status controls [GS]ET_STATUS_CTL */ +#define SAVE_USER_DEFAULTS_FORMATTER 0x0200 +#define RESTORE_USER_DEFAULTS_FORMATTER 0x0300 +#define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400 +#define READ_AGC_FORMATTER 0x0500 +#define READ_SHUTTER_FORMATTER 0x0600 +#define READ_RED_GAIN_FORMATTER 0x0700 +#define READ_BLUE_GAIN_FORMATTER 0x0800 +#define SENSOR_TYPE_FORMATTER1 0x0C00 +#define READ_RAW_Y_MEAN_FORMATTER 0x3100 +#define SET_POWER_SAVE_MODE_FORMATTER 0x3200 +#define MIRROR_IMAGE_FORMATTER 0x3300 +#define LED_FORMATTER 0x3400 +#define SENSOR_TYPE_FORMATTER2 0x3700 + +/* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */ +#define VIDEO_OUTPUT_CONTROL_FORMATTER 0x0100 + +/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */ +#define PT_RELATIVE_CONTROL_FORMATTER 0x01 +#define PT_RESET_CONTROL_FORMATTER 0x02 +#define PT_STATUS_FORMATTER 0x03 + +static const char *size2name[PSZ_MAX] = +{ + "subQCIF", + "QSIF", + "QCIF", + "SIF", + "CIF", + "VGA", +}; + +/********/ + +/* Entries for the Nala (645/646) camera; the Nala doesn't have compression + preferences, so you either get compressed or non-compressed streams. + + An alternate value of 0 means this mode is not available at all. + */ + +struct Nala_table_entry { + char alternate; /* USB alternate setting */ + int compressed; /* Compressed yes/no */ + + unsigned char mode[3]; /* precomputed mode table */ +}; + +static struct Nala_table_entry Nala_table[PSZ_MAX][8] = +{ +#include "pwc-nala.h" +}; + + +/****************************************************************************/ + + +#define SendControlMsg(request, value, buflen) \ + usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \ + request, \ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ + value, \ + pdev->vcinterface, \ + &buf, buflen, 500) + +#define RecvControlMsg(request, value, buflen) \ + usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \ + request, \ + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ + value, \ + pdev->vcinterface, \ + &buf, buflen, 500) + + +#if PWC_DEBUG +void pwc_hexdump(void *p, int len) +{ + int i; + unsigned char *s; + char buf[100], *d; + + s = (unsigned char *)p; + d = buf; + *d = '\0'; + Debug("Doing hexdump @ %p, %d bytes.\n", p, len); + for (i = 0; i < len; i++) { + d += sprintf(d, "%02X ", *s++); + if ((i & 0xF) == 0xF) { + Debug("%s\n", buf); + d = buf; + *d = '\0'; + } + } + if ((i & 0xF) != 0) + Debug("%s\n", buf); +} +#endif + +static inline int send_video_command(struct usb_device *udev, int index, void *buf, int buflen) +{ + return usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + SET_EP_STREAM_CTL, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + VIDEO_OUTPUT_CONTROL_FORMATTER, + index, + buf, buflen, 1000); +} + + + +static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) +{ + unsigned char buf[3]; + int ret, fps; + struct Nala_table_entry *pEntry; + int frames2frames[31] = + { /* closest match of framerate */ + 0, 0, 0, 0, 4, /* 0-4 */ + 5, 5, 7, 7, 10, /* 5-9 */ + 10, 10, 12, 12, 15, /* 10-14 */ + 15, 15, 15, 20, 20, /* 15-19 */ + 20, 20, 20, 24, 24, /* 20-24 */ + 24, 24, 24, 24, 24, /* 25-29 */ + 24 /* 30 */ + }; + int frames2table[31] = + { 0, 0, 0, 0, 0, /* 0-4 */ + 1, 1, 1, 2, 2, /* 5-9 */ + 3, 3, 4, 4, 4, /* 10-14 */ + 5, 5, 5, 5, 5, /* 15-19 */ + 6, 6, 6, 6, 7, /* 20-24 */ + 7, 7, 7, 7, 7, /* 25-29 */ + 7 /* 30 */ + }; + + if (size < 0 || size > PSZ_CIF || frames < 4 || frames > 25) + return -EINVAL; + frames = frames2frames[frames]; + fps = frames2table[frames]; + pEntry = &Nala_table[size][fps]; + if (pEntry->alternate == 0) + return -EINVAL; + + if (pEntry->compressed) + return -ENOENT; /* Not supported. */ + + memcpy(buf, pEntry->mode, 3); + ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3); + if (ret < 0) { + Debug("Failed to send video command... %d\n", ret); + return ret; + } + if (pEntry->compressed && pdev->vpalette != VIDEO_PALETTE_RAW) + { + switch(pdev->type) { + case 645: + case 646: +/* pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + break; + + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: +/* pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + break; + } + } + + pdev->cmd_len = 3; + memcpy(pdev->cmd_buf, buf, 3); + + /* Set various parameters */ + pdev->vframes = frames; + pdev->vsize = size; + pdev->valternate = pEntry->alternate; + pdev->image = pwc_image_sizes[size]; + pdev->frame_size = (pdev->image.x * pdev->image.y * 3) / 2; + if (pEntry->compressed) { + if (pdev->release < 5) { /* 4 fold compression */ + pdev->vbandlength = 528; + pdev->frame_size /= 4; + } + else { + pdev->vbandlength = 704; + pdev->frame_size /= 3; + } + } + else + pdev->vbandlength = 0; + return 0; +} + + +static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, int compression, int snapshot) +{ + unsigned char buf[13]; + const struct Timon_table_entry *pChoose; + int ret, fps; + + if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3) + return -EINVAL; + if (size == PSZ_VGA && frames > 15) + return -EINVAL; + fps = (frames / 5) - 1; + + /* Find a supported framerate with progressively higher compression ratios + if the preferred ratio is not available. + */ + pChoose = NULL; + while (compression <= 3) { + pChoose = &Timon_table[size][fps][compression]; + if (pChoose->alternate != 0) + break; + compression++; + } + if (pChoose == NULL || pChoose->alternate == 0) + return -ENOENT; /* Not supported. */ + + memcpy(buf, pChoose->mode, 13); + if (snapshot) + buf[0] |= 0x80; + ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13); + if (ret < 0) + return ret; + +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + + pdev->cmd_len = 13; + memcpy(pdev->cmd_buf, buf, 13); + + /* Set various parameters */ + pdev->vframes = frames; + pdev->vsize = size; + pdev->vsnapshot = snapshot; + pdev->valternate = pChoose->alternate; + pdev->image = pwc_image_sizes[size]; + pdev->vbandlength = pChoose->bandlength; + if (pChoose->bandlength > 0) + pdev->frame_size = (pChoose->bandlength * pdev->image.y) / 4; + else + pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8; + return 0; +} + + +static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, int compression, int snapshot) +{ + const struct Kiara_table_entry *pChoose = NULL; + int fps, ret; + unsigned char buf[12]; + struct Kiara_table_entry RawEntry = {6, 773, 1272, {0xAD, 0xF4, 0x10, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}}; + + if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3) + return -EINVAL; + if (size == PSZ_VGA && frames > 15) + return -EINVAL; + fps = (frames / 5) - 1; + + /* special case: VGA @ 5 fps and snapshot is raw bayer mode */ + if (size == PSZ_VGA && frames == 5 && snapshot) + { + /* Only available in case the raw palette is selected or + we have the decompressor available. This mode is + only available in compressed form + */ + if (pdev->vpalette == VIDEO_PALETTE_RAW) + { + Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette); + pChoose = &RawEntry; + } + else + { + Info("VGA/5 BAYER mode _must_ have a decompressor available, or use RAW palette.\n"); + } + } + else + { + /* Find a supported framerate with progressively higher compression ratios + if the preferred ratio is not available. + Skip this step when using RAW modes. + */ + while (compression <= 3) { + pChoose = &Kiara_table[size][fps][compression]; + if (pChoose->alternate != 0) + break; + compression++; + } + } + if (pChoose == NULL || pChoose->alternate == 0) + return -ENOENT; /* Not supported. */ + + Debug("Using alternate setting %d.\n", pChoose->alternate); + + /* usb_control_msg won't take staticly allocated arrays as argument?? */ + memcpy(buf, pChoose->mode, 12); + if (snapshot) + buf[0] |= 0x80; + + /* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */ + ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12); + if (ret < 0) + return ret; + +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + + pdev->cmd_len = 12; + memcpy(pdev->cmd_buf, buf, 12); + /* All set and go */ + pdev->vframes = frames; + pdev->vsize = size; + pdev->vsnapshot = snapshot; + pdev->valternate = pChoose->alternate; + pdev->image = pwc_image_sizes[size]; + pdev->vbandlength = pChoose->bandlength; + if (pdev->vbandlength > 0) + pdev->frame_size = (pdev->vbandlength * pdev->image.y) / 4; + else + pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8; + return 0; +} + + + +static void pwc_set_image_buffer_size(struct pwc_device *pdev) +{ + int i, factor = 0, filler = 0; + + /* for PALETTE_YUV420P */ + switch(pdev->vpalette) + { + case VIDEO_PALETTE_YUV420P: + factor = 6; + filler = 128; + break; + case VIDEO_PALETTE_RAW: + factor = 6; /* can be uncompressed YUV420P */ + filler = 0; + break; + } + + /* Set sizes in bytes */ + pdev->image.size = pdev->image.x * pdev->image.y * factor / 4; + pdev->view.size = pdev->view.x * pdev->view.y * factor / 4; + + /* Align offset, or you'll get some very weird results in + YUV420 mode... x must be multiple of 4 (to get the Y's in + place), and y even (or you'll mixup U & V). This is less of a + problem for YUV420P. + */ + pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC; + pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE; + + /* Fill buffers with gray or black */ + for (i = 0; i < MAX_IMAGES; i++) { + if (pdev->image_ptr[i] != NULL) + memset(pdev->image_ptr[i], filler, pdev->view.size); + } +} + + + +/** + @pdev: device structure + @width: viewport width + @height: viewport height + @frame: framerate, in fps + @compression: preferred compression ratio + @snapshot: snapshot mode or streaming + */ +int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot) +{ + int ret, size; + + Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette); + size = pwc_decode_size(pdev, width, height); + if (size < 0) { + Debug("Could not find suitable size.\n"); + return -ERANGE; + } + Debug("decode_size = %d.\n", size); + + ret = -EINVAL; + switch(pdev->type) { + case 645: + case 646: + ret = set_video_mode_Nala(pdev, size, frames); + break; + + case 675: + case 680: + case 690: + ret = set_video_mode_Timon(pdev, size, frames, compression, snapshot); + break; + + case 720: + case 730: + case 740: + case 750: + ret = set_video_mode_Kiara(pdev, size, frames, compression, snapshot); + break; + } + if (ret < 0) { + if (ret == -ENOENT) + Info("Video mode %s@%d fps is only supported with the decompressor module (pwcx).\n", size2name[size], frames); + else { + Err("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret); + } + return ret; + } + pdev->view.x = width; + pdev->view.y = height; + pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size; + pwc_set_image_buffer_size(pdev); + Trace(TRACE_SIZE, "Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y); + return 0; +} + + +/* BRIGHTNESS */ + +int pwc_get_brightness(struct pwc_device *pdev) +{ + char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); + if (ret < 0) + return ret; + return buf << 9; +} + +int pwc_set_brightness(struct pwc_device *pdev, int value) +{ + char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 9) & 0x7f; + return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); +} + +/* CONTRAST */ + +int pwc_get_contrast(struct pwc_device *pdev) +{ + char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1); + if (ret < 0) + return ret; + return buf << 10; +} + +int pwc_set_contrast(struct pwc_device *pdev, int value) +{ + char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 10) & 0x3f; + return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1); +} + +/* GAMMA */ + +int pwc_get_gamma(struct pwc_device *pdev) +{ + char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1); + if (ret < 0) + return ret; + return buf << 11; +} + +int pwc_set_gamma(struct pwc_device *pdev, int value) +{ + char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 11) & 0x1f; + return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1); +} + + +/* SATURATION */ + +int pwc_get_saturation(struct pwc_device *pdev) +{ + char buf; + int ret; + + if (pdev->type < 675) + return -1; + ret = RecvControlMsg(GET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1); + if (ret < 0) + return ret; + return 32768 + buf * 327; +} + +int pwc_set_saturation(struct pwc_device *pdev, int value) +{ + char buf; + + if (pdev->type < 675) + return -EINVAL; + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + /* saturation ranges from -100 to +100 */ + buf = (value - 32768) / 327; + return SendControlMsg(SET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1); +} + +/* AGC */ + +static inline int pwc_set_agc(struct pwc_device *pdev, int mode, int value) +{ + char buf; + int ret; + + if (mode) + buf = 0x0; /* auto */ + else + buf = 0xff; /* fixed */ + + ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1); + + if (!mode && ret >= 0) { + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 10) & 0x3F; + ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + } + if (ret < 0) + return ret; + return 0; +} + +static inline int pwc_get_agc(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1); + if (ret < 0) + return ret; + + if (buf != 0) { /* fixed */ + ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + if (ret < 0) + return ret; + if (buf > 0x3F) + buf = 0x3F; + *value = (buf << 10); + } + else { /* auto */ + ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1); + if (ret < 0) + return ret; + /* Gah... this value ranges from 0x00 ... 0x9F */ + if (buf > 0x9F) + buf = 0x9F; + *value = -(48 + buf * 409); + } + + return 0; +} + +static inline int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) +{ + char buf[2]; + int speed, ret; + + + if (mode) + buf[0] = 0x0; /* auto */ + else + buf[0] = 0xff; /* fixed */ + + ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1); + + if (!mode && ret >= 0) { + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + switch(pdev->type) { + case 675: + case 680: + case 690: + /* speed ranges from 0x0 to 0x290 (656) */ + speed = (value / 100); + buf[1] = speed >> 8; + buf[0] = speed & 0xff; + break; + case 720: + case 730: + case 740: + case 750: + /* speed seems to range from 0x0 to 0xff */ + buf[1] = 0; + buf[0] = value >> 8; + break; + } + + ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2); + } + return ret; +} + + +/* POWER */ + +int pwc_camera_power(struct pwc_device *pdev, int power) +{ + char buf; + + if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6)) + return 0; /* Not supported by Nala or Timon < release 6 */ + + if (power) + buf = 0x00; /* active */ + else + buf = 0xFF; /* power save */ + return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1); +} + + + +/* private calls */ + +static inline int pwc_restore_user(struct pwc_device *pdev) +{ + char buf; /* dummy */ + return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0); +} + +static inline int pwc_save_user(struct pwc_device *pdev) +{ + char buf; /* dummy */ + return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0); +} + +static inline int pwc_restore_factory(struct pwc_device *pdev) +{ + char buf; /* dummy */ + return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0); +} + + /* ************************************************* */ + /* Patch by Alvarado: (not in the original version */ + + /* + * the camera recognizes modes from 0 to 4: + * + * 00: indoor (incandescant lighting) + * 01: outdoor (sunlight) + * 02: fluorescent lighting + * 03: manual + * 04: auto + */ +static inline int pwc_set_awb(struct pwc_device *pdev, int mode) +{ + char buf; + int ret; + + if (mode < 0) + mode = 0; + + if (mode > 4) + mode = 4; + + buf = mode & 0x07; /* just the lowest three bits */ + + ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1); + + if (ret < 0) + return ret; + return 0; +} + +static inline int pwc_get_awb(struct pwc_device *pdev) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1); + + if (ret < 0) + return ret; + return buf; +} + +static inline int pwc_set_red_gain(struct pwc_device *pdev, int value) +{ + unsigned char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + /* only the msb is considered */ + buf = value >> 8; + return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); +} + +static inline int pwc_get_red_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + + +static inline int pwc_set_blue_gain(struct pwc_device *pdev, int value) +{ + unsigned char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + /* only the msb is considered */ + buf = value >> 8; + return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); +} + +static inline int pwc_get_blue_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + + +/* The following two functions are different, since they only read the + internal red/blue gains, which may be different from the manual + gains set or read above. + */ +static inline int pwc_read_red_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + +static inline int pwc_read_blue_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + + +static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed) +{ + unsigned char buf; + + /* useful range is 0x01..0x20 */ + buf = speed / 0x7f0; + return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); +} + +static inline int pwc_get_wb_speed(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf * 0x7f0; + return 0; +} + + +static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay) +{ + unsigned char buf; + + /* useful range is 0x01..0x3F */ + buf = (delay >> 10); + return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); +} + +static inline int pwc_get_wb_delay(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 10; + return 0; +} + + +int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) +{ + unsigned char buf[2]; + + if (pdev->type < 730) + return 0; + on_value /= 100; + off_value /= 100; + if (on_value < 0) + on_value = 0; + if (on_value > 0xff) + on_value = 0xff; + if (off_value < 0) + off_value = 0; + if (off_value > 0xff) + off_value = 0xff; + + buf[0] = on_value; + buf[1] = off_value; + + return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2); +} + +static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) +{ + unsigned char buf[2]; + int ret; + + if (pdev->type < 730) { + *on_value = -1; + *off_value = -1; + return 0; + } + + ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2); + if (ret < 0) + return ret; + *on_value = buf[0] * 100; + *off_value = buf[1] * 100; + return 0; +} + +static inline int pwc_set_contour(struct pwc_device *pdev, int contour) +{ + unsigned char buf; + int ret; + + if (contour < 0) + buf = 0xff; /* auto contour on */ + else + buf = 0x0; /* auto contour off */ + ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + + if (contour < 0) + return 0; + if (contour > 0xffff) + contour = 0xffff; + + buf = (contour >> 10); /* contour preset is [0..3f] */ + ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + return 0; +} + +static inline int pwc_get_contour(struct pwc_device *pdev, int *contour) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + + if (buf == 0) { + /* auto mode off, query current preset value */ + ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + *contour = buf << 10; + } + else + *contour = -1; + return 0; +} + + +static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight) +{ + unsigned char buf; + + if (backlight) + buf = 0xff; + else + buf = 0x0; + return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); +} + +static inline int pwc_get_backlight(struct pwc_device *pdev, int *backlight) +{ + int ret; + unsigned char buf; + + ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); + if (ret < 0) + return ret; + *backlight = buf; + return 0; +} + + +static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker) +{ + unsigned char buf; + + if (flicker) + buf = 0xff; + else + buf = 0x0; + return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); +} + +static inline int pwc_get_flicker(struct pwc_device *pdev, int *flicker) +{ + int ret; + unsigned char buf; + + ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); + if (ret < 0) + return ret; + *flicker = buf; + return 0; +} + + +static inline int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise) +{ + unsigned char buf; + + if (noise < 0) + noise = 0; + if (noise > 3) + noise = 3; + buf = noise; + return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); +} + +static inline int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) +{ + int ret; + unsigned char buf; + + ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); + if (ret < 0) + return ret; + *noise = buf; + return 0; +} + +static int pwc_mpt_reset(struct pwc_device *pdev, int flags) +{ + unsigned char buf; + + buf = flags & 0x03; // only lower two bits are currently used + return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1); +} + +static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) +{ + unsigned char buf[4]; + + /* set new relative angle; angles are expressed in degrees * 100, + but cam as .5 degree resolution, hence divide by 200. Also + the angle must be multiplied by 64 before it's send to + the cam (??) + */ + pan = 64 * pan / 100; + tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */ + buf[0] = pan & 0xFF; + buf[1] = (pan >> 8) & 0xFF; + buf[2] = tilt & 0xFF; + buf[3] = (tilt >> 8) & 0xFF; + return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4); +} + +static inline int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status) +{ + int ret; + unsigned char buf[5]; + + ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5); + if (ret < 0) + return ret; + status->status = buf[0] & 0x7; // 3 bits are used for reporting + status->time_pan = (buf[1] << 8) + buf[2]; + status->time_tilt = (buf[3] << 8) + buf[4]; + return 0; +} + + +int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) +{ + unsigned char buf; + int ret = -1, request; + + if (pdev->type < 675) + request = SENSOR_TYPE_FORMATTER1; + else if (pdev->type < 730) + return -1; /* The Vesta series doesn't have this call */ + else + request = SENSOR_TYPE_FORMATTER2; + + ret = RecvControlMsg(GET_STATUS_CTL, request, 1); + if (ret < 0) + return ret; + if (pdev->type < 675) + *sensor = buf | 0x100; + else + *sensor = buf; + return 0; +} + + + /* End of Add-Ons */ + /* ************************************************* */ + + +int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) +{ + int ret = 0; + + switch(cmd) { + case VIDIOCPWCRUSER: + { + if (pwc_restore_user(pdev)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCSUSER: + { + if (pwc_save_user(pdev)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCFACTORY: + { + if (pwc_restore_factory(pdev)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCSCQUAL: + { + int *qual = arg; + + if (*qual < 0 || *qual > 3) + ret = -EINVAL; + else + ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot); + if (ret >= 0) + pdev->vcompression = *qual; + break; + } + + case VIDIOCPWCGCQUAL: + { + int *qual = arg; + *qual = pdev->vcompression; + break; + } + + case VIDIOCPWCPROBE: + { + struct pwc_probe *probe = arg; + strcpy(probe->name, pdev->vdev->name); + probe->type = pdev->type; + break; + } + + case VIDIOCPWCGSERIAL: + { + struct pwc_serial *serial = arg; + strcpy(serial->serial, pdev->serial); + break; + } + + case VIDIOCPWCSAGC: + { + int *agc = arg; + if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCGAGC: + { + int *agc = arg; + + if (pwc_get_agc(pdev, agc)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCSSHUTTER: + { + int *shutter_speed = arg; + ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed); + break; + } + + case VIDIOCPWCSAWB: + { + struct pwc_whitebalance *wb = arg; + + ret = pwc_set_awb(pdev, wb->mode); + if (ret >= 0 && wb->mode == PWC_WB_MANUAL) { + pwc_set_red_gain(pdev, wb->manual_red); + pwc_set_blue_gain(pdev, wb->manual_blue); + } + break; + } + + case VIDIOCPWCGAWB: + { + struct pwc_whitebalance *wb = arg; + + memset(wb, 0, sizeof(struct pwc_whitebalance)); + wb->mode = pwc_get_awb(pdev); + if (wb->mode < 0) + ret = -EINVAL; + else { + if (wb->mode == PWC_WB_MANUAL) { + ret = pwc_get_red_gain(pdev, &wb->manual_red); + if (ret < 0) + break; + ret = pwc_get_blue_gain(pdev, &wb->manual_blue); + if (ret < 0) + break; + } + if (wb->mode == PWC_WB_AUTO) { + ret = pwc_read_red_gain(pdev, &wb->read_red); + if (ret < 0) + break; + ret = pwc_read_blue_gain(pdev, &wb->read_blue); + if (ret < 0) + break; + } + } + break; + } + + case VIDIOCPWCSAWBSPEED: + { + struct pwc_wb_speed *wbs = arg; + + if (wbs->control_speed > 0) { + ret = pwc_set_wb_speed(pdev, wbs->control_speed); + } + if (wbs->control_delay > 0) { + ret = pwc_set_wb_delay(pdev, wbs->control_delay); + } + break; + } + + case VIDIOCPWCGAWBSPEED: + { + struct pwc_wb_speed *wbs = arg; + + ret = pwc_get_wb_speed(pdev, &wbs->control_speed); + if (ret < 0) + break; + ret = pwc_get_wb_delay(pdev, &wbs->control_delay); + if (ret < 0) + break; + break; + } + + case VIDIOCPWCSLED: + { + struct pwc_leds *leds = arg; + ret = pwc_set_leds(pdev, leds->led_on, leds->led_off); + break; + } + + + case VIDIOCPWCGLED: + { + struct pwc_leds *leds = arg; + ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off); + break; + } + + case VIDIOCPWCSCONTOUR: + { + int *contour = arg; + ret = pwc_set_contour(pdev, *contour); + break; + } + + case VIDIOCPWCGCONTOUR: + { + int *contour = arg; + ret = pwc_get_contour(pdev, contour); + break; + } + + case VIDIOCPWCSBACKLIGHT: + { + int *backlight = arg; + ret = pwc_set_backlight(pdev, *backlight); + break; + } + + case VIDIOCPWCGBACKLIGHT: + { + int *backlight = arg; + ret = pwc_get_backlight(pdev, backlight); + break; + } + + case VIDIOCPWCSFLICKER: + { + int *flicker = arg; + ret = pwc_set_flicker(pdev, *flicker); + break; + } + + case VIDIOCPWCGFLICKER: + { + int *flicker = arg; + ret = pwc_get_flicker(pdev, flicker); + break; + } + + case VIDIOCPWCSDYNNOISE: + { + int *dynnoise = arg; + ret = pwc_set_dynamic_noise(pdev, *dynnoise); + break; + } + + case VIDIOCPWCGDYNNOISE: + { + int *dynnoise = arg; + ret = pwc_get_dynamic_noise(pdev, dynnoise); + break; + } + + case VIDIOCPWCGREALSIZE: + { + struct pwc_imagesize *size = arg; + size->width = pdev->image.x; + size->height = pdev->image.y; + break; + } + + case VIDIOCPWCMPTRESET: + { + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + int *flags = arg; + + ret = pwc_mpt_reset(pdev, *flags); + if (ret >= 0) + { + pdev->pan_angle = 0; + pdev->tilt_angle = 0; + } + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTGRANGE: + { + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_range *range = arg; + *range = pdev->angle_range; + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTSANGLE: + { + int new_pan, new_tilt; + + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_angles *angles = arg; + /* The camera can only set relative angles, so + do some calculations when getting an absolute angle . + */ + if (angles->absolute) + { + new_pan = angles->pan; + new_tilt = angles->tilt; + } + else + { + new_pan = pdev->pan_angle + angles->pan; + new_tilt = pdev->tilt_angle + angles->tilt; + } + /* check absolute ranges */ + if (new_pan < pdev->angle_range.pan_min || + new_pan > pdev->angle_range.pan_max || + new_tilt < pdev->angle_range.tilt_min || + new_tilt > pdev->angle_range.tilt_max) + { + ret = -ERANGE; + } + else + { + /* go to relative range, check again */ + new_pan -= pdev->pan_angle; + new_tilt -= pdev->tilt_angle; + /* angles are specified in degrees * 100, thus the limit = 36000 */ + if (new_pan < -36000 || new_pan > 36000 || new_tilt < -36000 || new_tilt > 36000) + ret = -ERANGE; + } + if (ret == 0) /* no errors so far */ + { + ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt); + if (ret >= 0) + { + pdev->pan_angle += new_pan; + pdev->tilt_angle += new_tilt; + } + if (ret == -EPIPE) /* stall -> out of range */ + ret = -ERANGE; + } + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTGANGLE: + { + + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_angles *angles = arg; + + angles->absolute = 1; + angles->pan = pdev->pan_angle; + angles->tilt = pdev->tilt_angle; + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTSTATUS: + { + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_status *status = arg; + ret = pwc_mpt_get_status(pdev, status); + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCGVIDCMD: + { + struct pwc_video_command *cmd = arg; + + cmd->type = pdev->type; + cmd->release = pdev->release; + cmd->command_len = pdev->cmd_len; + memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len); + cmd->bandlength = pdev->vbandlength; + cmd->frame_size = pdev->frame_size; + break; + } + /* + case VIDIOCPWCGVIDTABLE: + { + struct pwc_table_init_buffer *table = arg; + table->len = pdev->cmd_len; + memcpy(&table->buffer, pdev->decompress_data, pdev->decompressor->table_size); + break; + } + */ + + default: + ret = -ENOIOCTLCMD; + break; + } + + if (ret > 0) + return 0; + return ret; +} + + + diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c new file mode 100644 index 00000000000..90eb2604281 --- /dev/null +++ b/drivers/media/video/pwc/pwc-if.c @@ -0,0 +1,2205 @@ +/* Linux driver for Philips webcam + USB and Video4Linux interface part. + (C) 1999-2004 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +*/ + +/* + This code forms the interface between the USB layers and the Philips + specific stuff. Some adanved stuff of the driver falls under an + NDA, signed between me and Philips B.V., Eindhoven, the Netherlands, and + is thus not distributed in source form. The binary pwcx.o module + contains the code that falls under the NDA. + + In case you're wondering: 'pwc' stands for "Philips WebCam", but + I really didn't want to type 'philips_web_cam' every time (I'm lazy as + any Linux kernel hacker, but I don't like uncomprehensible abbreviations + without explanation). + + Oh yes, convention: to disctinguish between all the various pointers to + device-structures, I use these names for the pointer variables: + udev: struct usb_device * + vdev: struct video_device * + pdev: struct pwc_devive * +*/ + +/* Contributors: + - Alvarado: adding whitebalance code + - Alistar Moire: QuickCam 3000 Pro device/product ID + - Tony Hoyle: Creative Labs Webcam 5 device/product ID + - Mark Burazin: solving hang in VIDIOCSYNC when camera gets unplugged + - Jk Fang: Sotec Afina Eye ID + - Xavier Roche: QuickCam Pro 4000 ID + - Jens Knudsen: QuickCam Zoom ID + - J. Debert: QuickCam for Notebooks ID +*/ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <asm/io.h> + +#include "pwc.h" +#include "pwc-ioctl.h" +#include "pwc-kiara.h" +#include "pwc-timon.h" +#include "pwc-uncompress.h" + +/* Function prototypes and driver templates */ + +/* hotplug device table support */ +static struct usb_device_id pwc_device_table [] = { + { USB_DEVICE(0x0471, 0x0302) }, /* Philips models */ + { USB_DEVICE(0x0471, 0x0303) }, + { USB_DEVICE(0x0471, 0x0304) }, + { USB_DEVICE(0x0471, 0x0307) }, + { USB_DEVICE(0x0471, 0x0308) }, + { USB_DEVICE(0x0471, 0x030C) }, + { USB_DEVICE(0x0471, 0x0310) }, + { USB_DEVICE(0x0471, 0x0311) }, + { USB_DEVICE(0x0471, 0x0312) }, + { USB_DEVICE(0x0471, 0x0313) }, /* the 'new' 720K */ + { USB_DEVICE(0x069A, 0x0001) }, /* Askey */ + { USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam Pro 3000 */ + { USB_DEVICE(0x046D, 0x08B1) }, /* Logitech QuickCam Notebook Pro */ + { USB_DEVICE(0x046D, 0x08B2) }, /* Logitech QuickCam Pro 4000 */ + { USB_DEVICE(0x046D, 0x08B3) }, /* Logitech QuickCam Zoom (old model) */ + { USB_DEVICE(0x046D, 0x08B4) }, /* Logitech QuickCam Zoom (new model) */ + { USB_DEVICE(0x046D, 0x08B5) }, /* Logitech QuickCam Orbit/Sphere */ + { USB_DEVICE(0x046D, 0x08B6) }, /* Logitech (reserved) */ + { USB_DEVICE(0x046D, 0x08B7) }, /* Logitech (reserved) */ + { USB_DEVICE(0x046D, 0x08B8) }, /* Logitech (reserved) */ + { USB_DEVICE(0x055D, 0x9000) }, /* Samsung */ + { USB_DEVICE(0x055D, 0x9001) }, + { USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */ + { USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */ + { USB_DEVICE(0x04CC, 0x8116) }, /* Afina Eye */ + { USB_DEVICE(0x06BE, 0x8116) }, /* new Afina Eye */ + { USB_DEVICE(0x0d81, 0x1910) }, /* Visionite */ + { USB_DEVICE(0x0d81, 0x1900) }, + { } +}; +MODULE_DEVICE_TABLE(usb, pwc_device_table); + +static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id); +static void usb_pwc_disconnect(struct usb_interface *intf); + +static struct usb_driver pwc_driver = { + .name = "Philips webcam", /* name */ + .id_table = pwc_device_table, + .probe = usb_pwc_probe, /* probe() */ + .disconnect = usb_pwc_disconnect, /* disconnect() */ +}; + +#define MAX_DEV_HINTS 20 +#define MAX_ISOC_ERRORS 20 + +static int default_size = PSZ_QCIF; +static int default_fps = 10; +static int default_fbufs = 3; /* Default number of frame buffers */ +static int default_mbufs = 2; /* Default number of mmap() buffers */ + int pwc_trace = TRACE_MODULE | TRACE_FLOW | TRACE_PWCX; +static int power_save = 0; +static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */ +static int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */ +static struct { + int type; + char serial_number[30]; + int device_node; + struct pwc_device *pdev; +} device_hint[MAX_DEV_HINTS]; + +/***/ + +static int pwc_video_open(struct inode *inode, struct file *file); +static int pwc_video_close(struct inode *inode, struct file *file); +static ssize_t pwc_video_read(struct file *file, char __user * buf, + size_t count, loff_t *ppos); +static unsigned int pwc_video_poll(struct file *file, poll_table *wait); +static int pwc_video_ioctl(struct inode *inode, struct file *file, + unsigned int ioctlnr, unsigned long arg); +static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma); + +static struct file_operations pwc_fops = { + .owner = THIS_MODULE, + .open = pwc_video_open, + .release = pwc_video_close, + .read = pwc_video_read, + .poll = pwc_video_poll, + .mmap = pwc_video_mmap, + .ioctl = pwc_video_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static struct video_device pwc_template = { + .owner = THIS_MODULE, + .name = "Philips Webcam", /* Filled in later */ + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_PWC, + .release = video_device_release, + .fops = &pwc_fops, + .minor = -1, +}; + +/***************************************************************************/ + +/* Okay, this is some magic that I worked out and the reasoning behind it... + + The biggest problem with any USB device is of course: "what to do + when the user unplugs the device while it is in use by an application?" + We have several options: + 1) Curse them with the 7 plagues when they do (requires divine intervention) + 2) Tell them not to (won't work: they'll do it anyway) + 3) Oops the kernel (this will have a negative effect on a user's uptime) + 4) Do something sensible. + + Of course, we go for option 4. + + It happens that this device will be linked to two times, once from + usb_device and once from the video_device in their respective 'private' + pointers. This is done when the device is probed() and all initialization + succeeded. The pwc_device struct links back to both structures. + + When a device is unplugged while in use it will be removed from the + list of known USB devices; I also de-register it as a V4L device, but + unfortunately I can't free the memory since the struct is still in use + by the file descriptor. This free-ing is then deferend until the first + opportunity. Crude, but it works. + + A small 'advantage' is that if a user unplugs the cam and plugs it back + in, it should get assigned the same video device minor, but unfortunately + it's non-trivial to re-link the cam back to the video device... (that + would surely be magic! :)) +*/ + +/***************************************************************************/ +/* Private functions */ + +/* Here we want the physical address of the memory. + * This is used when initializing the contents of the area. + */ +static inline unsigned long kvirt_to_pa(unsigned long adr) +{ + unsigned long kva, ret; + + kva = (unsigned long) page_address(vmalloc_to_page((void *)adr)); + kva |= adr & (PAGE_SIZE-1); /* restore the offset */ + ret = __pa(kva); + return ret; +} + +static void * rvmalloc(unsigned long size) +{ + void * mem; + unsigned long adr; + + size=PAGE_ALIGN(size); + mem=vmalloc_32(size); + if (mem) + { + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr=(unsigned long) mem; + while (size > 0) + { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr+=PAGE_SIZE; + size-=PAGE_SIZE; + } + } + return mem; +} + +static void rvfree(void * mem, unsigned long size) +{ + unsigned long adr; + + if (mem) + { + adr=(unsigned long) mem; + while ((long) size > 0) + { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr+=PAGE_SIZE; + size-=PAGE_SIZE; + } + vfree(mem); + } +} + + + + +static int pwc_allocate_buffers(struct pwc_device *pdev) +{ + int i; + void *kbuf; + + Trace(TRACE_MEMORY, ">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev); + + if (pdev == NULL) + return -ENXIO; + +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("allocate_buffers(): magic failed.\n"); + return -ENXIO; + } +#endif + /* Allocate Isochronous pipe buffers */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + if (pdev->sbuf[i].data == NULL) { + kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL); + if (kbuf == NULL) { + Err("Failed to allocate iso buffer %d.\n", i); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated iso buffer at %p.\n", kbuf); + pdev->sbuf[i].data = kbuf; + memset(kbuf, 0, ISO_BUFFER_SIZE); + } + } + + /* Allocate frame buffer structure */ + if (pdev->fbuf == NULL) { + kbuf = kmalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL); + if (kbuf == NULL) { + Err("Failed to allocate frame buffer structure.\n"); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated frame buffer structure at %p.\n", kbuf); + pdev->fbuf = kbuf; + memset(kbuf, 0, default_fbufs * sizeof(struct pwc_frame_buf)); + } + /* create frame buffers, and make circular ring */ + for (i = 0; i < default_fbufs; i++) { + if (pdev->fbuf[i].data == NULL) { + kbuf = vmalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */ + if (kbuf == NULL) { + Err("Failed to allocate frame buffer %d.\n", i); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated frame buffer %d at %p.\n", i, kbuf); + pdev->fbuf[i].data = kbuf; + memset(kbuf, 128, PWC_FRAME_SIZE); + } + } + + /* Allocate decompressor table space */ + kbuf = NULL; + switch (pdev->type) + { + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: +#if 0 + Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private)); + kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); /* Timon & Kiara */ + break; + case 645: + case 646: + /* TODO & FIXME */ + kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); + break; +#endif + ; + } + pdev->decompress_data = kbuf; + + /* Allocate image buffer; double buffer for mmap() */ + kbuf = rvmalloc(default_mbufs * pdev->len_per_image); + if (kbuf == NULL) { + Err("Failed to allocate image buffer(s). needed (%d)\n",default_mbufs * pdev->len_per_image); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated image buffer at %p.\n", kbuf); + pdev->image_data = kbuf; + for (i = 0; i < default_mbufs; i++) + pdev->image_ptr[i] = kbuf + i * pdev->len_per_image; + for (; i < MAX_IMAGES; i++) + pdev->image_ptr[i] = NULL; + + kbuf = NULL; + + Trace(TRACE_MEMORY, "<< pwc_allocate_buffers()\n"); + return 0; +} + +static void pwc_free_buffers(struct pwc_device *pdev) +{ + int i; + + Trace(TRACE_MEMORY, "Entering free_buffers(%p).\n", pdev); + + if (pdev == NULL) + return; +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("free_buffers(): magic failed.\n"); + return; + } +#endif + + /* Release Iso-pipe buffers */ + for (i = 0; i < MAX_ISO_BUFS; i++) + if (pdev->sbuf[i].data != NULL) { + Trace(TRACE_MEMORY, "Freeing ISO buffer at %p.\n", pdev->sbuf[i].data); + kfree(pdev->sbuf[i].data); + pdev->sbuf[i].data = NULL; + } + + /* The same for frame buffers */ + if (pdev->fbuf != NULL) { + for (i = 0; i < default_fbufs; i++) { + if (pdev->fbuf[i].data != NULL) { + Trace(TRACE_MEMORY, "Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data); + vfree(pdev->fbuf[i].data); + pdev->fbuf[i].data = NULL; + } + } + kfree(pdev->fbuf); + pdev->fbuf = NULL; + } + + /* Intermediate decompression buffer & tables */ + if (pdev->decompress_data != NULL) { + Trace(TRACE_MEMORY, "Freeing decompression buffer at %p.\n", pdev->decompress_data); + kfree(pdev->decompress_data); + pdev->decompress_data = NULL; + } + pdev->decompressor = NULL; + + /* Release image buffers */ + if (pdev->image_data != NULL) { + Trace(TRACE_MEMORY, "Freeing image buffer at %p.\n", pdev->image_data); + rvfree(pdev->image_data, default_mbufs * pdev->len_per_image); + } + pdev->image_data = NULL; + + Trace(TRACE_MEMORY, "Leaving free_buffers().\n"); +} + +/* The frame & image buffer mess. + + Yes, this is a mess. Well, it used to be simple, but alas... In this + module, 3 buffers schemes are used to get the data from the USB bus to + the user program. The first scheme involves the ISO buffers (called thus + since they transport ISO data from the USB controller), and not really + interesting. Suffices to say the data from this buffer is quickly + gathered in an interrupt handler (pwc_isoc_handler) and placed into the + frame buffer. + + The frame buffer is the second scheme, and is the central element here. + It collects the data from a single frame from the camera (hence, the + name). Frames are delimited by the USB camera with a short USB packet, + so that's easy to detect. The frame buffers form a list that is filled + by the camera+USB controller and drained by the user process through + either read() or mmap(). + + The image buffer is the third scheme, in which frames are decompressed + and converted into planar format. For mmap() there is more than + one image buffer available. + + The frame buffers provide the image buffering. In case the user process + is a bit slow, this introduces lag and some undesired side-effects. + The problem arises when the frame buffer is full. I used to drop the last + frame, which makes the data in the queue stale very quickly. But dropping + the frame at the head of the queue proved to be a litte bit more difficult. + I tried a circular linked scheme, but this introduced more problems than + it solved. + + Because filling and draining are completely asynchronous processes, this + requires some fiddling with pointers and mutexes. + + Eventually, I came up with a system with 2 lists: an 'empty' frame list + and a 'full' frame list: + * Initially, all frame buffers but one are on the 'empty' list; the one + remaining buffer is our initial fill frame. + * If a frame is needed for filling, we try to take it from the 'empty' + list, unless that list is empty, in which case we take the buffer at + the head of the 'full' list. + * When our fill buffer has been filled, it is appended to the 'full' + list. + * If a frame is needed by read() or mmap(), it is taken from the head of + the 'full' list, handled, and then appended to the 'empty' list. If no + buffer is present on the 'full' list, we wait. + The advantage is that the buffer that is currently being decompressed/ + converted, is on neither list, and thus not in our way (any other scheme + I tried had the problem of old data lingering in the queue). + + Whatever strategy you choose, it always remains a tradeoff: with more + frame buffers the chances of a missed frame are reduced. On the other + hand, on slower machines it introduces lag because the queue will + always be full. + */ + +/** + \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first. + */ +static inline int pwc_next_fill_frame(struct pwc_device *pdev) +{ + int ret; + unsigned long flags; + + ret = 0; + spin_lock_irqsave(&pdev->ptrlock, flags); + if (pdev->fill_frame != NULL) { + /* append to 'full' list */ + if (pdev->full_frames == NULL) { + pdev->full_frames = pdev->fill_frame; + pdev->full_frames_tail = pdev->full_frames; + } + else { + pdev->full_frames_tail->next = pdev->fill_frame; + pdev->full_frames_tail = pdev->fill_frame; + } + } + if (pdev->empty_frames != NULL) { + /* We have empty frames available. That's easy */ + pdev->fill_frame = pdev->empty_frames; + pdev->empty_frames = pdev->empty_frames->next; + } + else { + /* Hmm. Take it from the full list */ +#if PWC_DEBUG + /* sanity check */ + if (pdev->full_frames == NULL) { + Err("Neither empty or full frames available!\n"); + spin_unlock_irqrestore(&pdev->ptrlock, flags); + return -EINVAL; + } +#endif + pdev->fill_frame = pdev->full_frames; + pdev->full_frames = pdev->full_frames->next; + ret = 1; + } + pdev->fill_frame->next = NULL; +#if PWC_DEBUG + Trace(TRACE_SEQUENCE, "Assigning sequence number %d.\n", pdev->sequence); + pdev->fill_frame->sequence = pdev->sequence++; +#endif + spin_unlock_irqrestore(&pdev->ptrlock, flags); + return ret; +} + + +/** + \brief Reset all buffers, pointers and lists, except for the image_used[] buffer. + + If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble. + */ +static void pwc_reset_buffers(struct pwc_device *pdev) +{ + int i; + unsigned long flags; + + spin_lock_irqsave(&pdev->ptrlock, flags); + pdev->full_frames = NULL; + pdev->full_frames_tail = NULL; + for (i = 0; i < default_fbufs; i++) { + pdev->fbuf[i].filled = 0; + if (i > 0) + pdev->fbuf[i].next = &pdev->fbuf[i - 1]; + else + pdev->fbuf->next = NULL; + } + pdev->empty_frames = &pdev->fbuf[default_fbufs - 1]; + pdev->empty_frames_tail = pdev->fbuf; + pdev->read_frame = NULL; + pdev->fill_frame = pdev->empty_frames; + pdev->empty_frames = pdev->empty_frames->next; + + pdev->image_read_pos = 0; + pdev->fill_image = 0; + spin_unlock_irqrestore(&pdev->ptrlock, flags); +} + + +/** + \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers. + */ +static int pwc_handle_frame(struct pwc_device *pdev) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&pdev->ptrlock, flags); + /* First grab our read_frame; this is removed from all lists, so + we can release the lock after this without problems */ + if (pdev->read_frame != NULL) { + /* This can't theoretically happen */ + Err("Huh? Read frame still in use?\n"); + } + else { + if (pdev->full_frames == NULL) { + Err("Woops. No frames ready.\n"); + } + else { + pdev->read_frame = pdev->full_frames; + pdev->full_frames = pdev->full_frames->next; + pdev->read_frame->next = NULL; + } + + if (pdev->read_frame != NULL) { +#if PWC_DEBUG + Trace(TRACE_SEQUENCE, "Decompressing frame %d\n", pdev->read_frame->sequence); +#endif + /* Decompression is a lenghty process, so it's outside of the lock. + This gives the isoc_handler the opportunity to fill more frames + in the mean time. + */ + spin_unlock_irqrestore(&pdev->ptrlock, flags); + ret = pwc_decompress(pdev); + spin_lock_irqsave(&pdev->ptrlock, flags); + + /* We're done with read_buffer, tack it to the end of the empty buffer list */ + if (pdev->empty_frames == NULL) { + pdev->empty_frames = pdev->read_frame; + pdev->empty_frames_tail = pdev->empty_frames; + } + else { + pdev->empty_frames_tail->next = pdev->read_frame; + pdev->empty_frames_tail = pdev->read_frame; + } + pdev->read_frame = NULL; + } + } + spin_unlock_irqrestore(&pdev->ptrlock, flags); + return ret; +} + +/** + \brief Advance pointers of image buffer (after each user request) +*/ +static inline void pwc_next_image(struct pwc_device *pdev) +{ + pdev->image_used[pdev->fill_image] = 0; + pdev->fill_image = (pdev->fill_image + 1) % default_mbufs; +} + + +/* This gets called for the Isochronous pipe (video). This is done in + * interrupt time, so it has to be fast, not crash, and not stall. Neat. + */ +static void pwc_isoc_handler(struct urb *urb, struct pt_regs *regs) +{ + struct pwc_device *pdev; + int i, fst, flen; + int awake; + struct pwc_frame_buf *fbuf; + unsigned char *fillptr = NULL, *iso_buf = NULL; + + awake = 0; + pdev = (struct pwc_device *)urb->context; + if (pdev == NULL) { + Err("isoc_handler() called with NULL device?!\n"); + return; + } +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("isoc_handler() called with bad magic!\n"); + return; + } +#endif + if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + Trace(TRACE_OPEN, "pwc_isoc_handler(): URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a"); + return; + } + if (urb->status != -EINPROGRESS && urb->status != 0) { + const char *errmsg; + + errmsg = "Unknown"; + switch(urb->status) { + case -ENOSR: errmsg = "Buffer error (overrun)"; break; + case -EPIPE: errmsg = "Stalled (device not responding)"; break; + case -EOVERFLOW: errmsg = "Babble (bad cable?)"; break; + case -EPROTO: errmsg = "Bit-stuff error (bad cable?)"; break; + case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break; + case -ETIMEDOUT: errmsg = "NAK (device does not respond)"; break; + } + Trace(TRACE_FLOW, "pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg); + /* Give up after a number of contiguous errors on the USB bus. + Appearantly something is wrong so we simulate an unplug event. + */ + if (++pdev->visoc_errors > MAX_ISOC_ERRORS) + { + Info("Too many ISOC errors, bailing out.\n"); + pdev->error_status = EIO; + awake = 1; + wake_up_interruptible(&pdev->frameq); + } + goto handler_end; // ugly, but practical + } + + fbuf = pdev->fill_frame; + if (fbuf == NULL) { + Err("pwc_isoc_handler without valid fill frame.\n"); + awake = 1; + goto handler_end; + } + else { + fillptr = fbuf->data + fbuf->filled; + } + + /* Reset ISOC error counter. We did get here, after all. */ + pdev->visoc_errors = 0; + + /* vsync: 0 = don't copy data + 1 = sync-hunt + 2 = synched + */ + /* Compact data */ + for (i = 0; i < urb->number_of_packets; i++) { + fst = urb->iso_frame_desc[i].status; + flen = urb->iso_frame_desc[i].actual_length; + iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + if (fst == 0) { + if (flen > 0) { /* if valid data... */ + if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */ + pdev->vsync = 2; + + /* ...copy data to frame buffer, if possible */ + if (flen + fbuf->filled > pdev->frame_total_size) { + Trace(TRACE_FLOW, "Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size); + pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */ + pdev->vframes_error++; + } + else { + memmove(fillptr, iso_buf, flen); + fillptr += flen; + } + } + fbuf->filled += flen; + } /* ..flen > 0 */ + + if (flen < pdev->vlast_packet_size) { + /* Shorter packet... We probably have the end of an image-frame; + wake up read() process and let select()/poll() do something. + Decompression is done in user time over there. + */ + if (pdev->vsync == 2) { + /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus + frames on the USB wire after an exposure change. This conditition is + however detected in the cam and a bit is set in the header. + */ + if (pdev->type == 730) { + unsigned char *ptr = (unsigned char *)fbuf->data; + + if (ptr[1] == 1 && ptr[0] & 0x10) { +#if PWC_DEBUG + Debug("Hyundai CMOS sensor bug. Dropping frame %d.\n", fbuf->sequence); +#endif + pdev->drop_frames += 2; + pdev->vframes_error++; + } + if ((ptr[0] ^ pdev->vmirror) & 0x01) { + if (ptr[0] & 0x01) + Info("Snapshot button pressed.\n"); + else + Info("Snapshot button released.\n"); + } + if ((ptr[0] ^ pdev->vmirror) & 0x02) { + if (ptr[0] & 0x02) + Info("Image is mirrored.\n"); + else + Info("Image is normal.\n"); + } + pdev->vmirror = ptr[0] & 0x03; + /* Sometimes the trailer of the 730 is still sent as a 4 byte packet + after a short frame; this condition is filtered out specifically. A 4 byte + frame doesn't make sense anyway. + So we get either this sequence: + drop_bit set -> 4 byte frame -> short frame -> good frame + Or this one: + drop_bit set -> short frame -> good frame + So we drop either 3 or 2 frames in all! + */ + if (fbuf->filled == 4) + pdev->drop_frames++; + } + + /* In case we were instructed to drop the frame, do so silently. + The buffer pointers are not updated either (but the counters are reset below). + */ + if (pdev->drop_frames > 0) + pdev->drop_frames--; + else { + /* Check for underflow first */ + if (fbuf->filled < pdev->frame_total_size) { + Trace(TRACE_FLOW, "Frame buffer underflow (%d bytes); discarded.\n", fbuf->filled); + pdev->vframes_error++; + } + else { + /* Send only once per EOF */ + awake = 1; /* delay wake_ups */ + + /* Find our next frame to fill. This will always succeed, since we + * nick a frame from either empty or full list, but if we had to + * take it from the full list, it means a frame got dropped. + */ + if (pwc_next_fill_frame(pdev)) { + pdev->vframes_dumped++; + if ((pdev->vframe_count > FRAME_LOWMARK) && (pwc_trace & TRACE_FLOW)) { + if (pdev->vframes_dumped < 20) + Trace(TRACE_FLOW, "Dumping frame %d.\n", pdev->vframe_count); + if (pdev->vframes_dumped == 20) + Trace(TRACE_FLOW, "Dumping frame %d (last message).\n", pdev->vframe_count); + } + } + fbuf = pdev->fill_frame; + } + } /* !drop_frames */ + pdev->vframe_count++; + } + fbuf->filled = 0; + fillptr = fbuf->data; + pdev->vsync = 1; + } /* .. flen < last_packet_size */ + pdev->vlast_packet_size = flen; + } /* ..status == 0 */ +#if PWC_DEBUG + /* This is normally not interesting to the user, unless you are really debugging something */ + else { + static int iso_error = 0; + iso_error++; + if (iso_error < 20) + Trace(TRACE_FLOW, "Iso frame %d of USB has error %d\n", i, fst); + } +#endif + } + +handler_end: + if (awake) + wake_up_interruptible(&pdev->frameq); + + urb->dev = pdev->udev; + i = usb_submit_urb(urb, GFP_ATOMIC); + if (i != 0) + Err("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i); +} + + +static int pwc_isoc_init(struct pwc_device *pdev) +{ + struct usb_device *udev; + struct urb *urb; + int i, j, ret; + + struct usb_interface *intf; + struct usb_host_interface *idesc = NULL; + + if (pdev == NULL) + return -EFAULT; + if (pdev->iso_init) + return 0; + pdev->vsync = 0; + udev = pdev->udev; + + /* Get the current alternate interface, adjust packet size */ + if (!udev->actconfig) + return -EFAULT; + + intf = usb_ifnum_to_if(udev, 0); + if (intf) + idesc = usb_altnum_to_altsetting(intf, pdev->valternate); + + if (!idesc) + return -EFAULT; + + /* Search video endpoint */ + pdev->vmax_packet_size = -1; + for (i = 0; i < idesc->desc.bNumEndpoints; i++) + if ((idesc->endpoint[i].desc.bEndpointAddress & 0xF) == pdev->vendpoint) { + pdev->vmax_packet_size = le16_to_cpu(idesc->endpoint[i].desc.wMaxPacketSize); + break; + } + + if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) { + Err("Failed to find packet size for video endpoint in current alternate setting.\n"); + return -ENFILE; /* Odd error, that should be noticeable */ + } + + /* Set alternate interface */ + ret = 0; + Trace(TRACE_OPEN, "Setting alternate interface %d\n", pdev->valternate); + ret = usb_set_interface(pdev->udev, 0, pdev->valternate); + if (ret < 0) + return ret; + + for (i = 0; i < MAX_ISO_BUFS; i++) { + urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); + if (urb == NULL) { + Err("Failed to allocate urb %d\n", i); + ret = -ENOMEM; + break; + } + pdev->sbuf[i].urb = urb; + Trace(TRACE_MEMORY, "Allocated URB at 0x%p\n", urb); + } + if (ret) { + /* De-allocate in reverse order */ + while (i >= 0) { + if (pdev->sbuf[i].urb != NULL) + usb_free_urb(pdev->sbuf[i].urb); + pdev->sbuf[i].urb = NULL; + i--; + } + return ret; + } + + /* init URB structure */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + urb = pdev->sbuf[i].urb; + + urb->interval = 1; // devik + urb->dev = udev; + urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = pdev->sbuf[i].data; + urb->transfer_buffer_length = ISO_BUFFER_SIZE; + urb->complete = pwc_isoc_handler; + urb->context = pdev; + urb->start_frame = 0; + urb->number_of_packets = ISO_FRAMES_PER_DESC; + for (j = 0; j < ISO_FRAMES_PER_DESC; j++) { + urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE; + urb->iso_frame_desc[j].length = pdev->vmax_packet_size; + } + } + + /* link */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL); + if (ret) + Err("isoc_init() submit_urb %d failed with error %d\n", i, ret); + else + Trace(TRACE_MEMORY, "URB 0x%p submitted.\n", pdev->sbuf[i].urb); + } + + /* All is done... */ + pdev->iso_init = 1; + Trace(TRACE_OPEN, "<< pwc_isoc_init()\n"); + return 0; +} + +static void pwc_isoc_cleanup(struct pwc_device *pdev) +{ + int i; + + Trace(TRACE_OPEN, ">> pwc_isoc_cleanup()\n"); + if (pdev == NULL) + return; + + /* Unlinking ISOC buffers one by one */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + struct urb *urb; + + urb = pdev->sbuf[i].urb; + if (urb != 0) { + if (pdev->iso_init) { + Trace(TRACE_MEMORY, "Unlinking URB %p\n", urb); + usb_kill_urb(urb); + } + Trace(TRACE_MEMORY, "Freeing URB\n"); + usb_free_urb(urb); + pdev->sbuf[i].urb = NULL; + } + } + + /* Stop camera, but only if we are sure the camera is still there (unplug + is signalled by EPIPE) + */ + if (pdev->error_status && pdev->error_status != EPIPE) { + Trace(TRACE_OPEN, "Setting alternate interface 0.\n"); + usb_set_interface(pdev->udev, 0, 0); + } + + pdev->iso_init = 0; + Trace(TRACE_OPEN, "<< pwc_isoc_cleanup()\n"); +} + +int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot) +{ + int ret, start; + + /* Stop isoc stuff */ + pwc_isoc_cleanup(pdev); + /* Reset parameters */ + pwc_reset_buffers(pdev); + /* Try to set video mode... */ + start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot); + if (ret) { + Trace(TRACE_FLOW, "pwc_set_video_mode attempt 1 failed.\n"); + /* That failed... restore old mode (we know that worked) */ + start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot); + if (start) { + Trace(TRACE_FLOW, "pwc_set_video_mode attempt 2 failed.\n"); + } + } + if (start == 0) + { + if (pwc_isoc_init(pdev) < 0) + { + Info("Failed to restart ISOC transfers in pwc_try_video_mode.\n"); + ret = -EAGAIN; /* let's try again, who knows if it works a second time */ + } + } + pdev->drop_frames++; /* try to avoid garbage during switch */ + return ret; /* Return original error code */ +} + + +/***************************************************************************/ +/* Video4Linux functions */ + +static int pwc_video_open(struct inode *inode, struct file *file) +{ + int i; + struct video_device *vdev = video_devdata(file); + struct pwc_device *pdev; + + Trace(TRACE_OPEN, ">> video_open called(vdev = 0x%p).\n", vdev); + + pdev = (struct pwc_device *)vdev->priv; + if (pdev == NULL) + BUG(); + if (pdev->vopen) + return -EBUSY; + + down(&pdev->modlock); + if (!pdev->usb_init) { + Trace(TRACE_OPEN, "Doing first time initialization.\n"); + pdev->usb_init = 1; + + if (pwc_trace & TRACE_OPEN) + { + /* Query sensor type */ + const char *sensor_type = NULL; + int ret; + + ret = pwc_get_cmos_sensor(pdev, &i); + if (ret >= 0) + { + switch(i) { + case 0x00: sensor_type = "Hyundai CMOS sensor"; break; + case 0x20: sensor_type = "Sony CCD sensor + TDA8787"; break; + case 0x2E: sensor_type = "Sony CCD sensor + Exas 98L59"; break; + case 0x2F: sensor_type = "Sony CCD sensor + ADI 9804"; break; + case 0x30: sensor_type = "Sharp CCD sensor + TDA8787"; break; + case 0x3E: sensor_type = "Sharp CCD sensor + Exas 98L59"; break; + case 0x3F: sensor_type = "Sharp CCD sensor + ADI 9804"; break; + case 0x40: sensor_type = "UPA 1021 sensor"; break; + case 0x100: sensor_type = "VGA sensor"; break; + case 0x101: sensor_type = "PAL MR sensor"; break; + default: sensor_type = "unknown type of sensor"; break; + } + } + if (sensor_type != NULL) + Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev->name, sensor_type, i); + } + } + + /* Turn on camera */ + if (power_save) { + i = pwc_camera_power(pdev, 1); + if (i < 0) + Info("Failed to restore power to the camera! (%d)\n", i); + } + /* Set LED on/off time */ + if (pwc_set_leds(pdev, led_on, led_off) < 0) + Info("Failed to set LED on/off time.\n"); + + pwc_construct(pdev); /* set min/max sizes correct */ + + /* So far, so good. Allocate memory. */ + i = pwc_allocate_buffers(pdev); + if (i < 0) { + Trace(TRACE_OPEN, "Failed to allocate buffer memory.\n"); + up(&pdev->modlock); + return i; + } + + /* Reset buffers & parameters */ + pwc_reset_buffers(pdev); + for (i = 0; i < default_mbufs; i++) + pdev->image_used[i] = 0; + pdev->vframe_count = 0; + pdev->vframes_dumped = 0; + pdev->vframes_error = 0; + pdev->visoc_errors = 0; + pdev->error_status = 0; +#if PWC_DEBUG + pdev->sequence = 0; +#endif + pwc_construct(pdev); /* set min/max sizes correct */ + + /* Set some defaults */ + pdev->vsnapshot = 0; + + /* Start iso pipe for video; first try the last used video size + (or the default one); if that fails try QCIF/10 or QSIF/10; + it that fails too, give up. + */ + i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0); + if (i) { + Trace(TRACE_OPEN, "First attempt at set_video_mode failed.\n"); + if (pdev->type == 730 || pdev->type == 740 || pdev->type == 750) + i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QSIF].x, pwc_image_sizes[PSZ_QSIF].y, 10, pdev->vcompression, 0); + else + i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QCIF].x, pwc_image_sizes[PSZ_QCIF].y, 10, pdev->vcompression, 0); + } + if (i) { + Trace(TRACE_OPEN, "Second attempt at set_video_mode failed.\n"); + up(&pdev->modlock); + return i; + } + + i = pwc_isoc_init(pdev); + if (i) { + Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i); + up(&pdev->modlock); + return i; + } + + pdev->vopen++; + file->private_data = vdev; + up(&pdev->modlock); + Trace(TRACE_OPEN, "<< video_open() returns 0.\n"); + return 0; +} + +/* Note that all cleanup is done in the reverse order as in _open */ +static int pwc_video_close(struct inode *inode, struct file *file) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + int i; + + Trace(TRACE_OPEN, ">> video_close called(vdev = 0x%p).\n", vdev); + + pdev = (struct pwc_device *)vdev->priv; + if (pdev->vopen == 0) + Info("video_close() called on closed device?\n"); + + /* Dump statistics, but only if a reasonable amount of frames were + processed (to prevent endless log-entries in case of snap-shot + programs) + */ + if (pdev->vframe_count > 20) + Info("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error); + + switch (pdev->type) + { + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: +/* pwc_dec23_exit(); *//* Timon & Kiara */ + break; + case 645: + case 646: +/* pwc_dec1_exit(); */ + break; + } + + pwc_isoc_cleanup(pdev); + pwc_free_buffers(pdev); + + /* Turn off LEDS and power down camera, but only when not unplugged */ + if (pdev->error_status != EPIPE) { + /* Turn LEDs off */ + if (pwc_set_leds(pdev, 0, 0) < 0) + Info("Failed to set LED on/off time.\n"); + if (power_save) { + i = pwc_camera_power(pdev, 0); + if (i < 0) + Err("Failed to power down camera (%d)\n", i); + } + } + pdev->vopen = 0; + Trace(TRACE_OPEN, "<< video_close()\n"); + return 0; +} + +/* + * FIXME: what about two parallel reads ???? + * ANSWER: Not supported. You can't open the device more than once, + despite what the V4L1 interface says. First, I don't see + the need, second there's no mechanism of alerting the + 2nd/3rd/... process of events like changing image size. + And I don't see the point of blocking that for the + 2nd/3rd/... process. + In multi-threaded environments reading parallel from any + device is tricky anyhow. + */ + +static ssize_t pwc_video_read(struct file *file, char __user * buf, + size_t count, loff_t *ppos) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + int noblock = file->f_flags & O_NONBLOCK; + DECLARE_WAITQUEUE(wait, current); + int bytes_to_read; + + Trace(TRACE_READ, "video_read(0x%p, %p, %zu) called.\n", vdev, buf, count); + if (vdev == NULL) + return -EFAULT; + pdev = vdev->priv; + if (pdev == NULL) + return -EFAULT; + if (pdev->error_status) + return -pdev->error_status; /* Something happened, report what. */ + + /* In case we're doing partial reads, we don't have to wait for a frame */ + if (pdev->image_read_pos == 0) { + /* Do wait queueing according to the (doc)book */ + add_wait_queue(&pdev->frameq, &wait); + while (pdev->full_frames == NULL) { + /* Check for unplugged/etc. here */ + if (pdev->error_status) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -pdev->error_status ; + } + if (noblock) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -EWOULDBLOCK; + } + if (signal_pending(current)) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -ERESTARTSYS; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + + /* Decompress and release frame */ + if (pwc_handle_frame(pdev)) + return -EFAULT; + } + + Trace(TRACE_READ, "Copying data to user space.\n"); + if (pdev->vpalette == VIDEO_PALETTE_RAW) + bytes_to_read = pdev->frame_size; + else + bytes_to_read = pdev->view.size; + + /* copy bytes to user space; we allow for partial reads */ + if (count + pdev->image_read_pos > bytes_to_read) + count = bytes_to_read - pdev->image_read_pos; + if (copy_to_user(buf, pdev->image_ptr[pdev->fill_image] + pdev->image_read_pos, count)) + return -EFAULT; + pdev->image_read_pos += count; + if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */ + pdev->image_read_pos = 0; + pwc_next_image(pdev); + } + return count; +} + +static unsigned int pwc_video_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + + if (vdev == NULL) + return -EFAULT; + pdev = vdev->priv; + if (pdev == NULL) + return -EFAULT; + + poll_wait(file, &pdev->frameq, wait); + if (pdev->error_status) + return POLLERR; + if (pdev->full_frames != NULL) /* we have frames waiting */ + return (POLLIN | POLLRDNORM); + + return 0; +} + +static int pwc_video_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + DECLARE_WAITQUEUE(wait, current); + + if (vdev == NULL) + return -EFAULT; + pdev = vdev->priv; + if (pdev == NULL) + return -EFAULT; + + switch (cmd) { + /* Query cabapilities */ + case VIDIOCGCAP: + { + struct video_capability *caps = arg; + + strcpy(caps->name, vdev->name); + caps->type = VID_TYPE_CAPTURE; + caps->channels = 1; + caps->audios = 1; + caps->minwidth = pdev->view_min.x; + caps->minheight = pdev->view_min.y; + caps->maxwidth = pdev->view_max.x; + caps->maxheight = pdev->view_max.y; + break; + } + + /* Channel functions (simulate 1 channel) */ + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + v->flags = 0; + v->tuners = 0; + v->type = VIDEO_TYPE_CAMERA; + strcpy(v->name, "Webcam"); + return 0; + } + + case VIDIOCSCHAN: + { + /* The spec says the argument is an integer, but + the bttv driver uses a video_channel arg, which + makes sense becasue it also has the norm flag. + */ + struct video_channel *v = arg; + if (v->channel != 0) + return -EINVAL; + return 0; + } + + + /* Picture functions; contrast etc. */ + case VIDIOCGPICT: + { + struct video_picture *p = arg; + int val; + + val = pwc_get_brightness(pdev); + if (val >= 0) + p->brightness = val; + else + p->brightness = 0xffff; + val = pwc_get_contrast(pdev); + if (val >= 0) + p->contrast = val; + else + p->contrast = 0xffff; + /* Gamma, Whiteness, what's the difference? :) */ + val = pwc_get_gamma(pdev); + if (val >= 0) + p->whiteness = val; + else + p->whiteness = 0xffff; + val = pwc_get_saturation(pdev); + if (val >= 0) + p->colour = val; + else + p->colour = 0xffff; + p->depth = 24; + p->palette = pdev->vpalette; + p->hue = 0xFFFF; /* N/A */ + break; + } + + case VIDIOCSPICT: + { + struct video_picture *p = arg; + /* + * FIXME: Suppose we are mid read + ANSWER: No problem: the firmware of the camera + can handle brightness/contrast/etc + changes at _any_ time, and the palette + is used exactly once in the uncompress + routine. + */ + pwc_set_brightness(pdev, p->brightness); + pwc_set_contrast(pdev, p->contrast); + pwc_set_gamma(pdev, p->whiteness); + pwc_set_saturation(pdev, p->colour); + if (p->palette && p->palette != pdev->vpalette) { + switch (p->palette) { + case VIDEO_PALETTE_YUV420P: + case VIDEO_PALETTE_RAW: + pdev->vpalette = p->palette; + return pwc_try_video_mode(pdev, pdev->image.x, pdev->image.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot); + break; + default: + return -EINVAL; + break; + } + } + break; + } + + /* Window/size parameters */ + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + vw->x = 0; + vw->y = 0; + vw->width = pdev->view.x; + vw->height = pdev->view.y; + vw->chromakey = 0; + vw->flags = (pdev->vframes << PWC_FPS_SHIFT) | + (pdev->vsnapshot ? PWC_FPS_SNAPSHOT : 0); + break; + } + + case VIDIOCSWIN: + { + struct video_window *vw = arg; + int fps, snapshot, ret; + + fps = (vw->flags & PWC_FPS_FRMASK) >> PWC_FPS_SHIFT; + snapshot = vw->flags & PWC_FPS_SNAPSHOT; + if (fps == 0) + fps = pdev->vframes; + if (pdev->view.x == vw->width && pdev->view.y && fps == pdev->vframes && snapshot == pdev->vsnapshot) + return 0; + ret = pwc_try_video_mode(pdev, vw->width, vw->height, fps, pdev->vcompression, snapshot); + if (ret) + return ret; + break; + } + + /* We don't have overlay support (yet) */ + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + memset(vb,0,sizeof(*vb)); + break; + } + + /* mmap() functions */ + case VIDIOCGMBUF: + { + /* Tell the user program how much memory is needed for a mmap() */ + struct video_mbuf *vm = arg; + int i; + + memset(vm, 0, sizeof(*vm)); + vm->size = default_mbufs * pdev->len_per_image; + vm->frames = default_mbufs; /* double buffering should be enough for most applications */ + for (i = 0; i < default_mbufs; i++) + vm->offsets[i] = i * pdev->len_per_image; + break; + } + + case VIDIOCMCAPTURE: + { + /* Start capture into a given image buffer (called 'frame' in video_mmap structure) */ + struct video_mmap *vm = arg; + + Trace(TRACE_READ, "VIDIOCMCAPTURE: %dx%d, frame %d, format %d\n", vm->width, vm->height, vm->frame, vm->format); + if (vm->frame < 0 || vm->frame >= default_mbufs) + return -EINVAL; + + /* xawtv is nasty. It probes the available palettes + by setting a very small image size and trying + various palettes... The driver doesn't support + such small images, so I'm working around it. + */ + if (vm->format) + { + switch (vm->format) + { + case VIDEO_PALETTE_YUV420P: + case VIDEO_PALETTE_RAW: + break; + default: + return -EINVAL; + break; + } + } + + if ((vm->width != pdev->view.x || vm->height != pdev->view.y) && + (vm->width >= pdev->view_min.x && vm->height >= pdev->view_min.y)) { + int ret; + + Trace(TRACE_OPEN, "VIDIOCMCAPTURE: changing size to please xawtv :-(.\n"); + ret = pwc_try_video_mode(pdev, vm->width, vm->height, pdev->vframes, pdev->vcompression, pdev->vsnapshot); + if (ret) + return ret; + } /* ... size mismatch */ + + /* FIXME: should we lock here? */ + if (pdev->image_used[vm->frame]) + return -EBUSY; /* buffer wasn't available. Bummer */ + pdev->image_used[vm->frame] = 1; + + /* Okay, we're done here. In the SYNC call we wait until a + frame comes available, then expand image into the given + buffer. + In contrast to the CPiA cam the Philips cams deliver a + constant stream, almost like a grabber card. Also, + we have separate buffers for the rawdata and the image, + meaning we can nearly always expand into the requested buffer. + */ + Trace(TRACE_READ, "VIDIOCMCAPTURE done.\n"); + break; + } + + case VIDIOCSYNC: + { + /* The doc says: "Whenever a buffer is used it should + call VIDIOCSYNC to free this frame up and continue." + + The only odd thing about this whole procedure is + that MCAPTURE flags the buffer as "in use", and + SYNC immediately unmarks it, while it isn't + after SYNC that you know that the buffer actually + got filled! So you better not start a CAPTURE in + the same frame immediately (use double buffering). + This is not a problem for this cam, since it has + extra intermediate buffers, but a hardware + grabber card will then overwrite the buffer + you're working on. + */ + int *mbuf = arg; + int ret; + + Trace(TRACE_READ, "VIDIOCSYNC called (%d).\n", *mbuf); + + /* bounds check */ + if (*mbuf < 0 || *mbuf >= default_mbufs) + return -EINVAL; + /* check if this buffer was requested anyway */ + if (pdev->image_used[*mbuf] == 0) + return -EINVAL; + + /* Add ourselves to the frame wait-queue. + + FIXME: needs auditing for safety. + QUESTION: In what respect? I think that using the + frameq is safe now. + */ + add_wait_queue(&pdev->frameq, &wait); + while (pdev->full_frames == NULL) { + if (pdev->error_status) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -pdev->error_status; + } + + if (signal_pending(current)) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -ERESTARTSYS; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + + /* The frame is ready. Expand in the image buffer + requested by the user. I don't care if you + mmap() 5 buffers and request data in this order: + buffer 4 2 3 0 1 2 3 0 4 3 1 . . . + Grabber hardware may not be so forgiving. + */ + Trace(TRACE_READ, "VIDIOCSYNC: frame ready.\n"); + pdev->fill_image = *mbuf; /* tell in which buffer we want the image to be expanded */ + /* Decompress, etc */ + ret = pwc_handle_frame(pdev); + pdev->image_used[*mbuf] = 0; + if (ret) + return -EFAULT; + break; + } + + case VIDIOCGAUDIO: + { + struct video_audio *v = arg; + + strcpy(v->name, "Microphone"); + v->audio = -1; /* unknown audio minor */ + v->flags = 0; + v->mode = VIDEO_SOUND_MONO; + v->volume = 0; + v->bass = 0; + v->treble = 0; + v->balance = 0x8000; + v->step = 1; + break; + } + + case VIDIOCSAUDIO: + { + /* Dummy: nothing can be set */ + break; + } + + case VIDIOCGUNIT: + { + struct video_unit *vu = arg; + + vu->video = pdev->vdev->minor & 0x3F; + vu->audio = -1; /* not known yet */ + vu->vbi = -1; + vu->radio = -1; + vu->teletext = -1; + break; + } + default: + return pwc_ioctl(pdev, cmd, arg); + } /* ..switch */ + return 0; +} + +static int pwc_video_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, pwc_video_do_ioctl); +} + + +static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + Trace(TRACE_MEMORY, "mmap(0x%p, 0x%lx, %lu) called.\n", vdev, start, size); + pdev = vdev->priv; + + vma->vm_flags |= VM_IO; + + pos = (unsigned long)pdev->image_data; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + return 0; +} + +/***************************************************************************/ +/* USB functions */ + +/* This function gets called when a new device is plugged in or the usb core + * is loaded. + */ + +static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct pwc_device *pdev = NULL; + int vendor_id, product_id, type_id; + int i, hint; + int features = 0; + int video_nr = -1; /* default: use next available device */ + char serial_number[30], *name; + + /* Check if we can handle this device */ + Trace(TRACE_PROBE, "probe() called [%04X %04X], if %d\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + intf->altsetting->desc.bInterfaceNumber); + + /* the interfaces are probed one by one. We are only interested in the + video interface (0) now. + Interface 1 is the Audio Control, and interface 2 Audio itself. + */ + if (intf->altsetting->desc.bInterfaceNumber > 0) + return -ENODEV; + + vendor_id = le16_to_cpu(udev->descriptor.idVendor); + product_id = le16_to_cpu(udev->descriptor.idProduct); + + if (vendor_id == 0x0471) { + switch (product_id) { + case 0x0302: + Info("Philips PCA645VC USB webcam detected.\n"); + name = "Philips 645 webcam"; + type_id = 645; + break; + case 0x0303: + Info("Philips PCA646VC USB webcam detected.\n"); + name = "Philips 646 webcam"; + type_id = 646; + break; + case 0x0304: + Info("Askey VC010 type 2 USB webcam detected.\n"); + name = "Askey VC010 webcam"; + type_id = 646; + break; + case 0x0307: + Info("Philips PCVC675K (Vesta) USB webcam detected.\n"); + name = "Philips 675 webcam"; + type_id = 675; + break; + case 0x0308: + Info("Philips PCVC680K (Vesta Pro) USB webcam detected.\n"); + name = "Philips 680 webcam"; + type_id = 680; + break; + case 0x030C: + Info("Philips PCVC690K (Vesta Pro Scan) USB webcam detected.\n"); + name = "Philips 690 webcam"; + type_id = 690; + break; + case 0x0310: + Info("Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected.\n"); + name = "Philips 730 webcam"; + type_id = 730; + break; + case 0x0311: + Info("Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.\n"); + name = "Philips 740 webcam"; + type_id = 740; + break; + case 0x0312: + Info("Philips PCVC750K (ToUCam Pro Scan) USB webcam detected.\n"); + name = "Philips 750 webcam"; + type_id = 750; + break; + case 0x0313: + Info("Philips PCVC720K/40 (ToUCam XS) USB webcam detected.\n"); + name = "Philips 720K/40 webcam"; + type_id = 720; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x069A) { + switch(product_id) { + case 0x0001: + Info("Askey VC010 type 1 USB webcam detected.\n"); + name = "Askey VC010 webcam"; + type_id = 645; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x046d) { + switch(product_id) { + case 0x08b0: + Info("Logitech QuickCam Pro 3000 USB webcam detected.\n"); + name = "Logitech QuickCam Pro 3000"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b1: + Info("Logitech QuickCam Notebook Pro USB webcam detected.\n"); + name = "Logitech QuickCam Notebook Pro"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b2: + Info("Logitech QuickCam 4000 Pro USB webcam detected.\n"); + name = "Logitech QuickCam Pro 4000"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b3: + Info("Logitech QuickCam Zoom USB webcam detected.\n"); + name = "Logitech QuickCam Zoom"; + type_id = 740; /* CCD sensor */ + break; + case 0x08B4: + Info("Logitech QuickCam Zoom (new model) USB webcam detected.\n"); + name = "Logitech QuickCam Zoom"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b5: + Info("Logitech QuickCam Orbit/Sphere USB webcam detected.\n"); + name = "Logitech QuickCam Orbit"; + type_id = 740; /* CCD sensor */ + features |= FEATURE_MOTOR_PANTILT; + break; + case 0x08b6: + case 0x08b7: + case 0x08b8: + Info("Logitech QuickCam detected (reserved ID).\n"); + name = "Logitech QuickCam (res.)"; + type_id = 730; /* Assuming CMOS */ + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x055d) { + /* I don't know the difference between the C10 and the C30; + I suppose the difference is the sensor, but both cameras + work equally well with a type_id of 675 + */ + switch(product_id) { + case 0x9000: + Info("Samsung MPC-C10 USB webcam detected.\n"); + name = "Samsung MPC-C10"; + type_id = 675; + break; + case 0x9001: + Info("Samsung MPC-C30 USB webcam detected.\n"); + name = "Samsung MPC-C30"; + type_id = 675; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x041e) { + switch(product_id) { + case 0x400c: + Info("Creative Labs Webcam 5 detected.\n"); + name = "Creative Labs Webcam 5"; + type_id = 730; + break; + case 0x4011: + Info("Creative Labs Webcam Pro Ex detected.\n"); + name = "Creative Labs Webcam Pro Ex"; + type_id = 740; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x04cc) { + switch(product_id) { + case 0x8116: + Info("Sotec Afina Eye USB webcam detected.\n"); + name = "Sotec Afina Eye"; + type_id = 730; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x06be) { + switch(product_id) { + case 0x8116: + /* This is essentially the same cam as the Sotec Afina Eye */ + Info("AME Co. Afina Eye USB webcam detected.\n"); + name = "AME Co. Afina Eye"; + type_id = 750; + break; + default: + return -ENODEV; + break; + } + + } + else if (vendor_id == 0x0d81) { + switch(product_id) { + case 0x1900: + Info("Visionite VCS-UC300 USB webcam detected.\n"); + name = "Visionite VCS-UC300"; + type_id = 740; /* CCD sensor */ + break; + case 0x1910: + Info("Visionite VCS-UM100 USB webcam detected.\n"); + name = "Visionite VCS-UM100"; + type_id = 730; /* CMOS sensor */ + break; + default: + return -ENODEV; + break; + } + } + else + return -ENODEV; /* Not any of the know types; but the list keeps growing. */ + + memset(serial_number, 0, 30); + usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29); + Trace(TRACE_PROBE, "Device serial number is %s\n", serial_number); + + if (udev->descriptor.bNumConfigurations > 1) + Info("Warning: more than 1 configuration available.\n"); + + /* Allocate structure, initialize pointers, mutexes, etc. and link it to the usb_device */ + pdev = kzalloc(sizeof(struct pwc_device), GFP_KERNEL); + if (pdev == NULL) { + Err("Oops, could not allocate memory for pwc_device.\n"); + return -ENOMEM; + } + pdev->type = type_id; + pdev->vsize = default_size; + pdev->vframes = default_fps; + strcpy(pdev->serial, serial_number); + pdev->features = features; + if (vendor_id == 0x046D && product_id == 0x08B5) + { + /* Logitech QuickCam Orbit + The ranges have been determined experimentally; they may differ from cam to cam. + Also, the exact ranges left-right and up-down are different for my cam + */ + pdev->angle_range.pan_min = -7000; + pdev->angle_range.pan_max = 7000; + pdev->angle_range.tilt_min = -3000; + pdev->angle_range.tilt_max = 2500; + } + + init_MUTEX(&pdev->modlock); + spin_lock_init(&pdev->ptrlock); + + pdev->udev = udev; + init_waitqueue_head(&pdev->frameq); + pdev->vcompression = pwc_preferred_compression; + + /* Allocate video_device structure */ + pdev->vdev = video_device_alloc(); + if (pdev->vdev == 0) + { + Err("Err, cannot allocate video_device struture. Failing probe."); + kfree(pdev); + return -ENOMEM; + } + memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); + strcpy(pdev->vdev->name, name); + pdev->vdev->owner = THIS_MODULE; + video_set_drvdata(pdev->vdev, pdev); + + pdev->release = le16_to_cpu(udev->descriptor.bcdDevice); + Trace(TRACE_PROBE, "Release: %04x\n", pdev->release); + + /* Now search device_hint[] table for a match, so we can hint a node number. */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) { + if (((device_hint[hint].type == -1) || (device_hint[hint].type == pdev->type)) && + (device_hint[hint].pdev == NULL)) { + /* so far, so good... try serial number */ + if ((device_hint[hint].serial_number[0] == '*') || !strcmp(device_hint[hint].serial_number, serial_number)) { + /* match! */ + video_nr = device_hint[hint].device_node; + Trace(TRACE_PROBE, "Found hint, will try to register as /dev/video%d\n", video_nr); + break; + } + } + } + + pdev->vdev->release = video_device_release; + i = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr); + if (i < 0) { + Err("Failed to register as video device (%d).\n", i); + video_device_release(pdev->vdev); /* Drip... drip... drip... */ + kfree(pdev); /* Oops, no memory leaks please */ + return -EIO; + } + else { + Info("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F); + } + + /* occupy slot */ + if (hint < MAX_DEV_HINTS) + device_hint[hint].pdev = pdev; + + Trace(TRACE_PROBE, "probe() function returning struct at 0x%p.\n", pdev); + usb_set_intfdata (intf, pdev); + return 0; +} + +/* The user janked out the cable... */ +static void usb_pwc_disconnect(struct usb_interface *intf) +{ + struct pwc_device *pdev; + int hint; + + lock_kernel(); + pdev = usb_get_intfdata (intf); + usb_set_intfdata (intf, NULL); + if (pdev == NULL) { + Err("pwc_disconnect() Called without private pointer.\n"); + goto disconnect_out; + } + if (pdev->udev == NULL) { + Err("pwc_disconnect() already called for %p\n", pdev); + goto disconnect_out; + } + if (pdev->udev != interface_to_usbdev(intf)) { + Err("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n"); + goto disconnect_out; + } +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("pwc_disconnect() Magic number failed. Consult your scrolls and try again.\n"); + goto disconnect_out; + } +#endif + + /* We got unplugged; this is signalled by an EPIPE error code */ + if (pdev->vopen) { + Info("Disconnected while webcam is in use!\n"); + pdev->error_status = EPIPE; + } + + /* Alert waiting processes */ + wake_up_interruptible(&pdev->frameq); + /* Wait until device is closed */ + while (pdev->vopen) + schedule(); + /* Device is now closed, so we can safely unregister it */ + Trace(TRACE_PROBE, "Unregistering video device in disconnect().\n"); + video_unregister_device(pdev->vdev); + + /* Free memory (don't set pdev to 0 just yet) */ + kfree(pdev); + +disconnect_out: + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; + + unlock_kernel(); +} + + +/* *grunt* We have to do atoi ourselves :-( */ +static int pwc_atoi(const char *s) +{ + int k = 0; + + k = 0; + while (*s != '\0' && *s >= '0' && *s <= '9') { + k = 10 * k + (*s - '0'); + s++; + } + return k; +} + + +/* + * Initialization code & module stuff + */ + +static char size[10]; +static int fps = 0; +static int fbufs = 0; +static int mbufs = 0; +static int trace = -1; +static int compression = -1; +static int leds[2] = { -1, -1 }; +static char *dev_hint[MAX_DEV_HINTS] = { }; + +module_param_string(size, size, sizeof(size), 0); +MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga"); +module_param(fps, int, 0000); +MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30"); +module_param(fbufs, int, 0000); +MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve"); +module_param(mbufs, int, 0000); +MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers"); +module_param(trace, int, 0000); +MODULE_PARM_DESC(trace, "For debugging purposes"); +module_param(power_save, bool, 0000); +MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off"); +module_param(compression, int, 0000); +MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)"); +module_param_array(leds, int, NULL, 0000); +MODULE_PARM_DESC(leds, "LED on,off time in milliseconds"); +module_param_array(dev_hint, charp, NULL, 0000); +MODULE_PARM_DESC(dev_hint, "Device node hints"); + +MODULE_DESCRIPTION("Philips & OEM USB webcam driver"); +MODULE_AUTHOR("Luc Saillard <luc@saillard.org>"); +MODULE_LICENSE("GPL"); + +static int __init usb_pwc_init(void) +{ + int i, sz; + char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" }; + + Info("Philips webcam module version " PWC_VERSION " loaded.\n"); + Info("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n"); + Info("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n"); + Info("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n"); + + if (fps) { + if (fps < 4 || fps > 30) { + Err("Framerate out of bounds (4-30).\n"); + return -EINVAL; + } + default_fps = fps; + Info("Default framerate set to %d.\n", default_fps); + } + + if (size[0]) { + /* string; try matching with array */ + for (sz = 0; sz < PSZ_MAX; sz++) { + if (!strcmp(sizenames[sz], size)) { /* Found! */ + default_size = sz; + break; + } + } + if (sz == PSZ_MAX) { + Err("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n"); + return -EINVAL; + } + Info("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y); + } + if (mbufs) { + if (mbufs < 1 || mbufs > MAX_IMAGES) { + Err("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES); + return -EINVAL; + } + default_mbufs = mbufs; + Info("Number of image buffers set to %d.\n", default_mbufs); + } + if (fbufs) { + if (fbufs < 2 || fbufs > MAX_FRAMES) { + Err("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES); + return -EINVAL; + } + default_fbufs = fbufs; + Info("Number of frame buffers set to %d.\n", default_fbufs); + } + if (trace >= 0) { + Info("Trace options: 0x%04x\n", trace); + pwc_trace = trace; + } + if (compression >= 0) { + if (compression > 3) { + Err("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n"); + return -EINVAL; + } + pwc_preferred_compression = compression; + Info("Preferred compression set to %d.\n", pwc_preferred_compression); + } + if (power_save) + Info("Enabling power save on open/close.\n"); + if (leds[0] >= 0) + led_on = leds[0]; + if (leds[1] >= 0) + led_off = leds[1]; + + /* Big device node whoopla. Basically, it allows you to assign a + device node (/dev/videoX) to a camera, based on its type + & serial number. The format is [type[.serialnumber]:]node. + + Any camera that isn't matched by these rules gets the next + available free device node. + */ + for (i = 0; i < MAX_DEV_HINTS; i++) { + char *s, *colon, *dot; + + /* This loop also initializes the array */ + device_hint[i].pdev = NULL; + s = dev_hint[i]; + if (s != NULL && *s != '\0') { + device_hint[i].type = -1; /* wildcard */ + strcpy(device_hint[i].serial_number, "*"); + + /* parse string: chop at ':' & '/' */ + colon = dot = s; + while (*colon != '\0' && *colon != ':') + colon++; + while (*dot != '\0' && *dot != '.') + dot++; + /* Few sanity checks */ + if (*dot != '\0' && dot > colon) { + Err("Malformed camera hint: the colon must be after the dot.\n"); + return -EINVAL; + } + + if (*colon == '\0') { + /* No colon */ + if (*dot != '\0') { + Err("Malformed camera hint: no colon + device node given.\n"); + return -EINVAL; + } + else { + /* No type or serial number specified, just a number. */ + device_hint[i].device_node = pwc_atoi(s); + } + } + else { + /* There's a colon, so we have at least a type and a device node */ + device_hint[i].type = pwc_atoi(s); + device_hint[i].device_node = pwc_atoi(colon + 1); + if (*dot != '\0') { + /* There's a serial number as well */ + int k; + + dot++; + k = 0; + while (*dot != ':' && k < 29) { + device_hint[i].serial_number[k++] = *dot; + dot++; + } + device_hint[i].serial_number[k] = '\0'; + } + } +#if PWC_DEBUG + Debug("device_hint[%d]:\n", i); + Debug(" type : %d\n", device_hint[i].type); + Debug(" serial# : %s\n", device_hint[i].serial_number); + Debug(" node : %d\n", device_hint[i].device_node); +#endif + } + else + device_hint[i].type = 0; /* not filled */ + } /* ..for MAX_DEV_HINTS */ + + Trace(TRACE_PROBE, "Registering driver at address 0x%p.\n", &pwc_driver); + return usb_register(&pwc_driver); +} + +static void __exit usb_pwc_exit(void) +{ + Trace(TRACE_MODULE, "Deregistering driver.\n"); + usb_deregister(&pwc_driver); + Info("Philips webcam module removed.\n"); +} + +module_init(usb_pwc_init); +module_exit(usb_pwc_exit); + diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h new file mode 100644 index 00000000000..5f9cb08bc02 --- /dev/null +++ b/drivers/media/video/pwc/pwc-ioctl.h @@ -0,0 +1,292 @@ +#ifndef PWC_IOCTL_H +#define PWC_IOCTL_H + +/* (C) 2001-2004 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* This is pwc-ioctl.h belonging to PWC 8.12.1 + It contains structures and defines to communicate from user space + directly to the driver. + */ + +/* + Changes + 2001/08/03 Alvarado Added ioctl constants to access methods for + changing white balance and red/blue gains + 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE + 2003/12/13 Nemosft Unv. Some modifications to make interfacing to + PWCX easier + */ + +/* These are private ioctl() commands, specific for the Philips webcams. + They contain functions not found in other webcams, and settings not + specified in the Video4Linux API. + + The #define names are built up like follows: + VIDIOC VIDeo IOCtl prefix + PWC Philps WebCam + G optional: Get + S optional: Set + ... the function + */ + + + /* Enumeration of image sizes */ +#define PSZ_SQCIF 0x00 +#define PSZ_QSIF 0x01 +#define PSZ_QCIF 0x02 +#define PSZ_SIF 0x03 +#define PSZ_CIF 0x04 +#define PSZ_VGA 0x05 +#define PSZ_MAX 6 + + +/* The frame rate is encoded in the video_window.flags parameter using + the upper 16 bits, since some flags are defined nowadays. The following + defines provide a mask and shift to filter out this value. + + In 'Snapshot' mode the camera freezes its automatic exposure and colour + balance controls. + */ +#define PWC_FPS_SHIFT 16 +#define PWC_FPS_MASK 0x00FF0000 +#define PWC_FPS_FRMASK 0x003F0000 +#define PWC_FPS_SNAPSHOT 0x00400000 + + +/* structure for transferring x & y coordinates */ +struct pwc_coord +{ + int x, y; /* guess what */ + int size; /* size, or offset */ +}; + + +/* Used with VIDIOCPWCPROBE */ +struct pwc_probe +{ + char name[32]; + int type; +}; + +struct pwc_serial +{ + char serial[30]; /* String with serial number. Contains terminating 0 */ +}; + +/* pwc_whitebalance.mode values */ +#define PWC_WB_INDOOR 0 +#define PWC_WB_OUTDOOR 1 +#define PWC_WB_FL 2 +#define PWC_WB_MANUAL 3 +#define PWC_WB_AUTO 4 + +/* Used with VIDIOCPWC[SG]AWB (Auto White Balance). + Set mode to one of the PWC_WB_* values above. + *red and *blue are the respective gains of these colour components inside + the camera; range 0..65535 + When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; + otherwise undefined. + 'read_red' and 'read_blue' are read-only. +*/ +struct pwc_whitebalance +{ + int mode; + int manual_red, manual_blue; /* R/W */ + int read_red, read_blue; /* R/O */ +}; + +/* + 'control_speed' and 'control_delay' are used in automatic whitebalance mode, + and tell the camera how fast it should react to changes in lighting, and + with how much delay. Valid values are 0..65535. +*/ +struct pwc_wb_speed +{ + int control_speed; + int control_delay; + +}; + +/* Used with VIDIOCPWC[SG]LED */ +struct pwc_leds +{ + int led_on; /* Led on-time; range = 0..25000 */ + int led_off; /* Led off-time; range = 0..25000 */ +}; + +/* Image size (used with GREALSIZE) */ +struct pwc_imagesize +{ + int width; + int height; +}; + +/* Defines and structures for Motorized Pan & Tilt */ +#define PWC_MPT_PAN 0x01 +#define PWC_MPT_TILT 0x02 +#define PWC_MPT_TIMEOUT 0x04 /* for status */ + +/* Set angles; when absolute != 0, the angle is absolute and the + driver calculates the relative offset for you. This can only + be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns + absolute angles. + */ +struct pwc_mpt_angles +{ + int absolute; /* write-only */ + int pan; /* degrees * 100 */ + int tilt; /* degress * 100 */ +}; + +/* Range of angles of the camera, both horizontally and vertically. + */ +struct pwc_mpt_range +{ + int pan_min, pan_max; /* degrees * 100 */ + int tilt_min, tilt_max; +}; + +struct pwc_mpt_status +{ + int status; + int time_pan; + int time_tilt; +}; + + +/* This is used for out-of-kernel decompression. With it, you can get + all the necessary information to initialize and use the decompressor + routines in standalone applications. + */ +struct pwc_video_command +{ + int type; /* camera type (645, 675, 730, etc.) */ + int release; /* release number */ + + int size; /* one of PSZ_* */ + int alternate; + int command_len; /* length of USB video command */ + unsigned char command_buf[13]; /* Actual USB video command */ + int bandlength; /* >0 = compressed */ + int frame_size; /* Size of one (un)compressed frame */ +}; + +/* Flags for PWCX subroutines. Not all modules honour all flags. */ +#define PWCX_FLAG_PLANAR 0x0001 +#define PWCX_FLAG_BAYER 0x0008 + + +/* IOCTL definitions */ + + /* Restore user settings */ +#define VIDIOCPWCRUSER _IO('v', 192) + /* Save user settings */ +#define VIDIOCPWCSUSER _IO('v', 193) + /* Restore factory settings */ +#define VIDIOCPWCFACTORY _IO('v', 194) + + /* You can manipulate the compression factor. A compression preference of 0 + means use uncompressed modes when available; 1 is low compression, 2 is + medium and 3 is high compression preferred. Of course, the higher the + compression, the lower the bandwidth used but more chance of artefacts + in the image. The driver automatically chooses a higher compression when + the preferred mode is not available. + */ + /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */ +#define VIDIOCPWCSCQUAL _IOW('v', 195, int) + /* Get preferred compression quality */ +#define VIDIOCPWCGCQUAL _IOR('v', 195, int) + + +/* Retrieve serial number of camera */ +#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial) + + /* This is a probe function; since so many devices are supported, it + becomes difficult to include all the names in programs that want to + check for the enhanced Philips stuff. So in stead, try this PROBE; + it returns a structure with the original name, and the corresponding + Philips type. + To use, fill the structure with zeroes, call PROBE and if that succeeds, + compare the name with that returned from VIDIOCGCAP; they should be the + same. If so, you can be assured it is a Philips (OEM) cam and the type + is valid. + */ +#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe) + + /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */ +#define VIDIOCPWCSAGC _IOW('v', 200, int) + /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */ +#define VIDIOCPWCGAGC _IOR('v', 200, int) + /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */ +#define VIDIOCPWCSSHUTTER _IOW('v', 201, int) + + /* Color compensation (Auto White Balance) */ +#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance) +#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance) + + /* Auto WB speed */ +#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed) +#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed) + + /* LEDs on/off/blink; int range 0..65535 */ +#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds) +#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds) + + /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */ +#define VIDIOCPWCSCONTOUR _IOW('v', 206, int) +#define VIDIOCPWCGCONTOUR _IOR('v', 206, int) + + /* Backlight compensation; 0 = off, otherwise on */ +#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int) +#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int) + + /* Flickerless mode; = 0 off, otherwise on */ +#define VIDIOCPWCSFLICKER _IOW('v', 208, int) +#define VIDIOCPWCGFLICKER _IOR('v', 208, int) + + /* Dynamic noise reduction; 0 off, 3 = high noise reduction */ +#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int) +#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int) + + /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */ +#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize) + + /* Motorized pan & tilt functions */ +#define VIDIOCPWCMPTRESET _IOW('v', 211, int) +#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range) +#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles) +#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles) +#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status) + + /* Get the USB set-video command; needed for initializing libpwcx */ +#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command) +struct pwc_table_init_buffer { + int len; + char *buffer; + +}; +#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer) + +#endif diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c new file mode 100644 index 00000000000..c498c68bace --- /dev/null +++ b/drivers/media/video/pwc/pwc-kiara.c @@ -0,0 +1,318 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +/* This tables contains entries for the 730/740/750 (Kiara) camera, with + 4 different qualities (no compression, low, medium, high). + It lists the bandwidth requirements for said mode by its alternate interface + number. An alternate of 0 means that the mode is unavailable. + + There are 6 * 4 * 4 entries: + 6 different resolutions subqcif, qsif, qcif, sif, cif, vga + 6 framerates: 5, 10, 15, 20, 25, 30 + 4 compression modi: none, low, medium, high + + When an uncompressed mode is not available, the next available compressed mode + will be chosen (unless the decompressor is absent). Sometimes there are only + 1 or 2 compressed modes available; in that case entries are duplicated. +*/ + + +#include "pwc-kiara.h" +#include "pwc-uncompress.h" + +const struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] = +{ + /* SQCIF */ + { + /* 5 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 10 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 15 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, + /* QSIF */ + { + /* 5 fps */ + { + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + }, + /* 10 fps */ + { + {2, 291, 0, {0x1C, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0x01, 0x80}}, + {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}}, + {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}}, + {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}}, + }, + /* 15 fps */ + { + {3, 437, 0, {0x1B, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x01, 0x80}}, + {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}}, + {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}}, + {1, 192, 420, {0x13, 0xF4, 0x30, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x18, 0xC0, 0x00, 0x80}}, + }, + /* 20 fps */ + { + {4, 589, 0, {0x1A, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4D, 0x02, 0x80}}, + {3, 448, 730, {0x12, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xC0, 0x01, 0x80}}, + {2, 292, 476, {0x12, 0xF4, 0x30, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0x01, 0x80}}, + {1, 192, 312, {0x12, 0xF4, 0x50, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0x00, 0x80}}, + }, + /* 25 fps */ + { + {5, 703, 0, {0x19, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x02, 0x80}}, + {3, 447, 610, {0x11, 0xF4, 0x30, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x28, 0xBF, 0x01, 0x80}}, + {2, 292, 398, {0x11, 0xF4, 0x50, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x28, 0x24, 0x01, 0x80}}, + {1, 193, 262, {0x11, 0xF4, 0x50, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x28, 0xC1, 0x00, 0x80}}, + }, + /* 30 fps */ + { + {8, 874, 0, {0x18, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x6A, 0x03, 0x80}}, + {5, 704, 730, {0x10, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x28, 0xC0, 0x02, 0x80}}, + {3, 448, 492, {0x10, 0xF4, 0x30, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x28, 0xC0, 0x01, 0x80}}, + {2, 292, 320, {0x10, 0xF4, 0x50, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x28, 0x24, 0x01, 0x80}}, + }, + }, + /* QCIF */ + { + /* 5 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 10 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 15 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, + /* SIF */ + { + /* 5 fps */ + { + {4, 582, 0, {0x0D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x02, 0x80}}, + {3, 387, 1276, {0x05, 0xF4, 0x30, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x01, 0x80}}, + {2, 291, 960, {0x05, 0xF4, 0x30, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0x01, 0x80}}, + {1, 191, 630, {0x05, 0xF4, 0x50, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x18, 0xBF, 0x00, 0x80}}, + }, + /* 10 fps */ + { + {0, }, + {6, 775, 1278, {0x04, 0xF4, 0x30, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x03, 0x80}}, + {3, 447, 736, {0x04, 0xF4, 0x30, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x28, 0xBF, 0x01, 0x80}}, + {2, 292, 480, {0x04, 0xF4, 0x70, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x28, 0x24, 0x01, 0x80}}, + }, + /* 15 fps */ + { + {0, }, + {9, 955, 1050, {0x03, 0xF4, 0x30, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x03, 0x80}}, + {4, 592, 650, {0x03, 0xF4, 0x30, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x50, 0x02, 0x80}}, + {3, 448, 492, {0x03, 0xF4, 0x50, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x38, 0xC0, 0x01, 0x80}}, + }, + /* 20 fps */ + { + {0, }, + {9, 958, 782, {0x02, 0xF4, 0x30, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x03, 0x80}}, + {5, 703, 574, {0x02, 0xF4, 0x50, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x02, 0x80}}, + {3, 446, 364, {0x02, 0xF4, 0x90, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x38, 0xBE, 0x01, 0x80}}, + }, + /* 25 fps */ + { + {0, }, + {9, 958, 654, {0x01, 0xF4, 0x30, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x03, 0x80}}, + {6, 776, 530, {0x01, 0xF4, 0x50, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x03, 0x80}}, + {4, 592, 404, {0x01, 0xF4, 0x70, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x48, 0x50, 0x02, 0x80}}, + }, + /* 30 fps */ + { + {0, }, + {9, 957, 526, {0x00, 0xF4, 0x50, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x03, 0x80}}, + {6, 775, 426, {0x00, 0xF4, 0x70, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x03, 0x80}}, + {4, 590, 324, {0x00, 0x7A, 0x88, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x50, 0x4E, 0x02, 0x80}}, + }, + }, + /* CIF */ + { + /* 5 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 10 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 15 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, + /* VGA */ + { + /* 5 fps */ + { + {0, }, + {6, 773, 1272, {0x25, 0xF4, 0x30, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}}, + {4, 592, 976, {0x25, 0xF4, 0x50, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x02, 0x80}}, + {3, 448, 738, {0x25, 0xF4, 0x90, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x01, 0x80}}, + }, + /* 10 fps */ + { + {0, }, + {9, 956, 788, {0x24, 0xF4, 0x70, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x03, 0x80}}, + {6, 776, 640, {0x24, 0xF4, 0xB0, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x03, 0x80}}, + {4, 592, 488, {0x24, 0x7A, 0xE8, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x02, 0x80}}, + }, + /* 15 fps */ + { + {0, }, + {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}}, + {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}}, + {8, 895, 492, {0x23, 0x7A, 0xE8, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x03, 0x80}}, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, +}; + diff --git a/drivers/media/video/pwc/pwc-kiara.h b/drivers/media/video/pwc/pwc-kiara.h new file mode 100644 index 00000000000..12929abbb1f --- /dev/null +++ b/drivers/media/video/pwc/pwc-kiara.h @@ -0,0 +1,45 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* Entries for the Kiara (730/740/750) camera */ + +#ifndef PWC_KIARA_H +#define PWC_KIARA_H + +#include "pwc-ioctl.h" + +struct Kiara_table_entry +{ + char alternate; /* USB alternate interface */ + unsigned short packetsize; /* Normal packet size */ + unsigned short bandlength; /* Bandlength when decompressing */ + unsigned char mode[12]; /* precomputed mode settings for cam */ +}; + +const extern struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4]; +const extern unsigned int KiaraRomTable[8][2][16][8]; + +#endif + + diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c new file mode 100644 index 00000000000..b7a4bd3524c --- /dev/null +++ b/drivers/media/video/pwc/pwc-misc.c @@ -0,0 +1,140 @@ +/* Linux driver for Philips webcam + Various miscellaneous functions and tables. + (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/slab.h> + +#include "pwc.h" + +struct pwc_coord pwc_image_sizes[PSZ_MAX] = +{ + { 128, 96, 0 }, + { 160, 120, 0 }, + { 176, 144, 0 }, + { 320, 240, 0 }, + { 352, 288, 0 }, + { 640, 480, 0 }, +}; + +/* x,y -> PSZ_ */ +int pwc_decode_size(struct pwc_device *pdev, int width, int height) +{ + int i, find; + + /* Make sure we don't go beyond our max size. + NB: we have different limits for RAW and normal modes. In case + you don't have the decompressor loaded or use RAW mode, + the maximum viewable size is smaller. + */ + if (pdev->vpalette == VIDEO_PALETTE_RAW) + { + if (width > pdev->abs_max.x || height > pdev->abs_max.y) + { + Debug("VIDEO_PALETTE_RAW: going beyond abs_max.\n"); + return -1; + } + } + else + { + if (width > pdev->view_max.x || height > pdev->view_max.y) + { + Debug("VIDEO_PALETTE_ not RAW: going beyond view_max.\n"); + return -1; + } + } + + /* Find the largest size supported by the camera that fits into the + requested size. + */ + find = -1; + for (i = 0; i < PSZ_MAX; i++) { + if (pdev->image_mask & (1 << i)) { + if (pwc_image_sizes[i].x <= width && pwc_image_sizes[i].y <= height) + find = i; + } + } + return find; +} + +/* initialize variables depending on type and decompressor*/ +void pwc_construct(struct pwc_device *pdev) +{ + switch(pdev->type) { + case 645: + case 646: + pdev->view_min.x = 128; + pdev->view_min.y = 96; + pdev->view_max.x = 352; + pdev->view_max.y = 288; + pdev->abs_max.x = 352; + pdev->abs_max.y = 288; + pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QCIF | 1 << PSZ_CIF; + pdev->vcinterface = 2; + pdev->vendpoint = 4; + pdev->frame_header_size = 0; + pdev->frame_trailer_size = 0; + break; + case 675: + case 680: + case 690: + pdev->view_min.x = 128; + pdev->view_min.y = 96; + /* Anthill bug #38: PWC always reports max size, even without PWCX */ + pdev->view_max.x = 640; + pdev->view_max.y = 480; + pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA; + pdev->abs_max.x = 640; + pdev->abs_max.y = 480; + pdev->vcinterface = 3; + pdev->vendpoint = 4; + pdev->frame_header_size = 0; + pdev->frame_trailer_size = 0; + break; + case 720: + case 730: + case 740: + case 750: + pdev->view_min.x = 160; + pdev->view_min.y = 120; + pdev->view_max.x = 640; + pdev->view_max.y = 480; + pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA; + pdev->abs_max.x = 640; + pdev->abs_max.y = 480; + pdev->vcinterface = 3; + pdev->vendpoint = 5; + pdev->frame_header_size = TOUCAM_HEADER_SIZE; + pdev->frame_trailer_size = TOUCAM_TRAILER_SIZE; + break; + } + Debug("type = %d\n",pdev->type); + pdev->vpalette = VIDEO_PALETTE_YUV420P; /* default */ + pdev->view_min.size = pdev->view_min.x * pdev->view_min.y; + pdev->view_max.size = pdev->view_max.x * pdev->view_max.y; + /* length of image, in YUV format; always allocate enough memory. */ + pdev->len_per_image = (pdev->abs_max.x * pdev->abs_max.y * 3) / 2; +} + + diff --git a/drivers/media/video/pwc/pwc-nala.h b/drivers/media/video/pwc/pwc-nala.h new file mode 100644 index 00000000000..e6c5cb69d03 --- /dev/null +++ b/drivers/media/video/pwc/pwc-nala.h @@ -0,0 +1,66 @@ + /* SQCIF */ + { + {0, 0, {0x04, 0x01, 0x03}}, + {8, 0, {0x05, 0x01, 0x03}}, + {7, 0, {0x08, 0x01, 0x03}}, + {7, 0, {0x0A, 0x01, 0x03}}, + {6, 0, {0x0C, 0x01, 0x03}}, + {5, 0, {0x0F, 0x01, 0x03}}, + {4, 0, {0x14, 0x01, 0x03}}, + {3, 0, {0x18, 0x01, 0x03}}, + }, + /* QSIF */ + { + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + }, + /* QCIF */ + { + {0, 0, {0x04, 0x01, 0x02}}, + {8, 0, {0x05, 0x01, 0x02}}, + {7, 0, {0x08, 0x01, 0x02}}, + {6, 0, {0x0A, 0x01, 0x02}}, + {5, 0, {0x0C, 0x01, 0x02}}, + {4, 0, {0x0F, 0x01, 0x02}}, + {1, 0, {0x14, 0x01, 0x02}}, + {1, 0, {0x18, 0x01, 0x02}}, + }, + /* SIF */ + { + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + }, + /* CIF */ + { + {4, 0, {0x04, 0x01, 0x01}}, + {7, 1, {0x05, 0x03, 0x01}}, + {6, 1, {0x08, 0x03, 0x01}}, + {4, 1, {0x0A, 0x03, 0x01}}, + {3, 1, {0x0C, 0x03, 0x01}}, + {2, 1, {0x0F, 0x03, 0x01}}, + {0}, + {0}, + }, + /* VGA */ + { + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + }, diff --git a/drivers/media/video/pwc/pwc-timon.c b/drivers/media/video/pwc/pwc-timon.c new file mode 100644 index 00000000000..dee967173d6 --- /dev/null +++ b/drivers/media/video/pwc/pwc-timon.c @@ -0,0 +1,316 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +/* This tables contains entries for the 675/680/690 (Timon) camera, with + 4 different qualities (no compression, low, medium, high). + It lists the bandwidth requirements for said mode by its alternate interface + number. An alternate of 0 means that the mode is unavailable. + + There are 6 * 4 * 4 entries: + 6 different resolutions subqcif, qsif, qcif, sif, cif, vga + 6 framerates: 5, 10, 15, 20, 25, 30 + 4 compression modi: none, low, medium, high + + When an uncompressed mode is not available, the next available compressed mode + will be chosen (unless the decompressor is absent). Sometimes there are only + 1 or 2 compressed modes available; in that case entries are duplicated. +*/ + +#include "pwc-timon.h" + +const struct Timon_table_entry Timon_table[PSZ_MAX][6][4] = +{ + /* SQCIF */ + { + /* 5 fps */ + { + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + }, + /* 10 fps */ + { + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + }, + /* 15 fps */ + { + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + }, + /* 20 fps */ + { + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + }, + /* 25 fps */ + { + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + }, + /* 30 fps */ + { + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + }, + }, + /* QSIF */ + { + /* 5 fps */ + { + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + }, + /* 10 fps */ + { + {2, 291, 0, {0x2C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0xA1, 0xC0, 0x02}}, + {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + }, + /* 15 fps */ + { + {3, 437, 0, {0x2B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x6D, 0xC0, 0x02}}, + {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {1, 191, 420, {0x2B, 0xF4, 0x0D, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + }, + /* 20 fps */ + { + {4, 588, 0, {0x2A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4C, 0x52, 0xC0, 0x02}}, + {3, 447, 730, {0x2A, 0xF4, 0x05, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 476, {0x2A, 0xF4, 0x0D, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0xA1, 0xC0, 0x02}}, + {1, 192, 312, {0x2A, 0xF4, 0x1D, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}}, + }, + /* 25 fps */ + { + {5, 703, 0, {0x29, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x42, 0xC0, 0x02}}, + {3, 447, 610, {0x29, 0xF4, 0x05, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 398, {0x29, 0xF4, 0x0D, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}}, + {1, 192, 262, {0x29, 0xF4, 0x25, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}}, + }, + /* 30 fps */ + { + {8, 873, 0, {0x28, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x69, 0x37, 0xC0, 0x02}}, + {5, 704, 774, {0x28, 0xF4, 0x05, 0x18, 0x21, 0x17, 0x59, 0x0F, 0x18, 0xC0, 0x42, 0xC0, 0x02}}, + {3, 448, 492, {0x28, 0xF4, 0x05, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x18, 0xC0, 0x69, 0xC0, 0x02}}, + {2, 291, 320, {0x28, 0xF4, 0x1D, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}}, + }, + }, + /* QCIF */ + { + /* 5 fps */ + { + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + }, + /* 10 fps */ + { + {3, 385, 0, {0x0C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x81, 0x79, 0xC0, 0x02}}, + {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {1, 194, 532, {0x0C, 0xF4, 0x05, 0x10, 0x9A, 0x0F, 0xBE, 0x1B, 0x08, 0xC2, 0xF0, 0xC0, 0x02}}, + }, + /* 15 fps */ + { + {4, 577, 0, {0x0B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x41, 0x52, 0xC0, 0x02}}, + {3, 447, 818, {0x0B, 0xF4, 0x05, 0x19, 0x89, 0x18, 0xAD, 0x0F, 0x10, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 534, {0x0B, 0xF4, 0x05, 0x10, 0xA3, 0x0F, 0xC7, 0x19, 0x10, 0x24, 0xA1, 0xC0, 0x02}}, + {1, 195, 356, {0x0B, 0xF4, 0x15, 0x0B, 0x11, 0x0A, 0x35, 0x1E, 0x10, 0xC3, 0xF0, 0xC0, 0x02}}, + }, + /* 20 fps */ + { + {6, 776, 0, {0x0A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x08, 0x3F, 0xC0, 0x02}}, + {4, 591, 804, {0x0A, 0xF4, 0x05, 0x19, 0x1E, 0x18, 0x42, 0x0F, 0x18, 0x4F, 0x4E, 0xC0, 0x02}}, + {3, 447, 608, {0x0A, 0xF4, 0x05, 0x12, 0xFD, 0x12, 0x21, 0x15, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 291, 396, {0x0A, 0xF4, 0x15, 0x0C, 0x5E, 0x0B, 0x82, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}}, + }, + /* 25 fps */ + { + {9, 928, 0, {0x09, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xA0, 0x33, 0xC0, 0x02}}, + {5, 703, 800, {0x09, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x10, 0x18, 0xBF, 0x42, 0xC0, 0x02}}, + {3, 447, 508, {0x09, 0xF4, 0x0D, 0x0F, 0xD2, 0x0E, 0xF6, 0x1B, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 332, {0x09, 0xF4, 0x1D, 0x0A, 0x5A, 0x09, 0x7E, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}}, + }, + /* 30 fps */ + { + {0, }, + {9, 956, 876, {0x08, 0xF4, 0x05, 0x1B, 0x58, 0x1A, 0x7C, 0x0E, 0x20, 0xBC, 0x33, 0x10, 0x02}}, + {4, 592, 542, {0x08, 0xF4, 0x05, 0x10, 0xE4, 0x10, 0x08, 0x17, 0x20, 0x50, 0x4E, 0x10, 0x02}}, + {2, 291, 266, {0x08, 0xF4, 0x25, 0x08, 0x48, 0x07, 0x6C, 0x1E, 0x20, 0x23, 0xA1, 0x10, 0x02}}, + }, + }, + /* SIF */ + { + /* 5 fps */ + { + {4, 582, 0, {0x35, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x52, 0x60, 0x02}}, + {3, 387, 1276, {0x35, 0xF4, 0x05, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x79, 0x60, 0x02}}, + {2, 291, 960, {0x35, 0xF4, 0x0D, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0xA1, 0x60, 0x02}}, + {1, 191, 630, {0x35, 0xF4, 0x1D, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x08, 0xBF, 0xF4, 0x60, 0x02}}, + }, + /* 10 fps */ + { + {0, }, + {6, 775, 1278, {0x34, 0xF4, 0x05, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x3F, 0x10, 0x02}}, + {3, 447, 736, {0x34, 0xF4, 0x15, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x18, 0xBF, 0x69, 0x10, 0x02}}, + {2, 291, 480, {0x34, 0xF4, 0x2D, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x18, 0x23, 0xA1, 0x10, 0x02}}, + }, + /* 15 fps */ + { + {0, }, + {9, 955, 1050, {0x33, 0xF4, 0x05, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x33, 0x10, 0x02}}, + {4, 591, 650, {0x33, 0xF4, 0x15, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x4F, 0x4E, 0x10, 0x02}}, + {3, 448, 492, {0x33, 0xF4, 0x25, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x28, 0xC0, 0x69, 0x10, 0x02}}, + }, + /* 20 fps */ + { + {0, }, + {9, 958, 782, {0x32, 0xF4, 0x0D, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x33, 0xD0, 0x02}}, + {5, 703, 574, {0x32, 0xF4, 0x1D, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x42, 0xD0, 0x02}}, + {3, 446, 364, {0x32, 0xF4, 0x3D, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x30, 0xBE, 0x69, 0xD0, 0x02}}, + }, + /* 25 fps */ + { + {0, }, + {9, 958, 654, {0x31, 0xF4, 0x15, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x33, 0x90, 0x02}}, + {6, 776, 530, {0x31, 0xF4, 0x25, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x3F, 0x90, 0x02}}, + {4, 592, 404, {0x31, 0xF4, 0x35, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x38, 0x50, 0x4E, 0x90, 0x02}}, + }, + /* 30 fps */ + { + {0, }, + {9, 957, 526, {0x30, 0xF4, 0x25, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x33, 0x60, 0x02}}, + {6, 775, 426, {0x30, 0xF4, 0x35, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x3F, 0x60, 0x02}}, + {4, 590, 324, {0x30, 0x7A, 0x4B, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x40, 0x4E, 0x52, 0x60, 0x02}}, + }, + }, + /* CIF */ + { + /* 5 fps */ + { + {6, 771, 0, {0x15, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x03, 0x3F, 0x80, 0x02}}, + {4, 465, 1278, {0x15, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x03, 0x18, 0xD1, 0x65, 0x80, 0x02}}, + {2, 291, 800, {0x15, 0xF4, 0x15, 0x18, 0xF4, 0x17, 0x3C, 0x05, 0x18, 0x23, 0xA1, 0x80, 0x02}}, + {1, 193, 528, {0x15, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x18, 0xC1, 0xF4, 0x80, 0x02}}, + }, + /* 10 fps */ + { + {0, }, + {9, 932, 1278, {0x14, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x04, 0x30, 0xA4, 0x33, 0x10, 0x02}}, + {4, 591, 812, {0x14, 0xF4, 0x15, 0x19, 0x56, 0x17, 0x9E, 0x06, 0x28, 0x4F, 0x4E, 0x10, 0x02}}, + {2, 291, 400, {0x14, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x28, 0x23, 0xA1, 0x10, 0x02}}, + }, + /* 15 fps */ + { + {0, }, + {9, 956, 876, {0x13, 0xF4, 0x0D, 0x1B, 0x58, 0x19, 0xA0, 0x05, 0x38, 0xBC, 0x33, 0x60, 0x02}}, + {5, 703, 644, {0x13, 0xF4, 0x1D, 0x14, 0x1C, 0x12, 0x64, 0x08, 0x38, 0xBF, 0x42, 0x60, 0x02}}, + {3, 448, 410, {0x13, 0xF4, 0x3D, 0x0C, 0xC4, 0x0B, 0x0C, 0x0E, 0x38, 0xC0, 0x69, 0x60, 0x02}}, + }, + /* 20 fps */ + { + {0, }, + {9, 956, 650, {0x12, 0xF4, 0x1D, 0x14, 0x4A, 0x12, 0x92, 0x09, 0x48, 0xBC, 0x33, 0x10, 0x03}}, + {6, 776, 528, {0x12, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x40, 0x08, 0x3F, 0x10, 0x03}}, + {4, 591, 402, {0x12, 0xF4, 0x3D, 0x0C, 0x8F, 0x0A, 0xD7, 0x0E, 0x40, 0x4F, 0x4E, 0x10, 0x03}}, + }, + /* 25 fps */ + { + {0, }, + {9, 956, 544, {0x11, 0xF4, 0x25, 0x10, 0xF4, 0x0F, 0x3C, 0x0A, 0x48, 0xBC, 0x33, 0xC0, 0x02}}, + {7, 840, 478, {0x11, 0xF4, 0x2D, 0x0E, 0xEB, 0x0D, 0x33, 0x0B, 0x48, 0x48, 0x3B, 0xC0, 0x02}}, + {5, 703, 400, {0x11, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x48, 0xBF, 0x42, 0xC0, 0x02}}, + }, + /* 30 fps */ + { + {0, }, + {9, 956, 438, {0x10, 0xF4, 0x35, 0x0D, 0xAC, 0x0B, 0xF4, 0x0D, 0x50, 0xBC, 0x33, 0x10, 0x02}}, + {7, 838, 384, {0x10, 0xF4, 0x45, 0x0B, 0xFD, 0x0A, 0x45, 0x0F, 0x50, 0x46, 0x3B, 0x10, 0x02}}, + {6, 773, 354, {0x10, 0x7A, 0x4B, 0x0B, 0x0C, 0x09, 0x80, 0x10, 0x50, 0x05, 0x3F, 0x10, 0x02}}, + }, + }, + /* VGA */ + { + /* 5 fps */ + { + {0, }, + {6, 773, 1272, {0x1D, 0xF4, 0x15, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x3F, 0x10, 0x02}}, + {4, 592, 976, {0x1D, 0xF4, 0x25, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x4E, 0x10, 0x02}}, + {3, 448, 738, {0x1D, 0xF4, 0x3D, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x69, 0x10, 0x02}}, + }, + /* 10 fps */ + { + {0, }, + {9, 956, 788, {0x1C, 0xF4, 0x35, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x33, 0x10, 0x02}}, + {6, 776, 640, {0x1C, 0x7A, 0x53, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x3F, 0x10, 0x02}}, + {4, 592, 488, {0x1C, 0x7A, 0x6B, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x4E, 0x10, 0x02}}, + }, + /* 15 fps */ + { + {0, }, + {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}}, + {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}}, + {8, 895, 492, {0x1B, 0x7A, 0x6B, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x37, 0x80, 0x02}}, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, +}; + diff --git a/drivers/media/video/pwc/pwc-timon.h b/drivers/media/video/pwc/pwc-timon.h new file mode 100644 index 00000000000..a86b3782a08 --- /dev/null +++ b/drivers/media/video/pwc/pwc-timon.h @@ -0,0 +1,61 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + + +/* This tables contains entries for the 675/680/690 (Timon) camera, with + 4 different qualities (no compression, low, medium, high). + It lists the bandwidth requirements for said mode by its alternate interface + number. An alternate of 0 means that the mode is unavailable. + + There are 6 * 4 * 4 entries: + 6 different resolutions subqcif, qsif, qcif, sif, cif, vga + 6 framerates: 5, 10, 15, 20, 25, 30 + 4 compression modi: none, low, medium, high + + When an uncompressed mode is not available, the next available compressed mode + will be chosen (unless the decompressor is absent). Sometimes there are only + 1 or 2 compressed modes available; in that case entries are duplicated. +*/ + +#ifndef PWC_TIMON_H +#define PWC_TIMON_H + +#include "pwc-ioctl.h" + +struct Timon_table_entry +{ + char alternate; /* USB alternate interface */ + unsigned short packetsize; /* Normal packet size */ + unsigned short bandlength; /* Bandlength when decompressing */ + unsigned char mode[13]; /* precomputed mode settings for cam */ +}; + +const extern struct Timon_table_entry Timon_table[PSZ_MAX][6][4]; +const extern unsigned int TimonRomTable [16][2][16][8]; + + +#endif + + diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c new file mode 100644 index 00000000000..ef4204eab6c --- /dev/null +++ b/drivers/media/video/pwc/pwc-uncompress.c @@ -0,0 +1,146 @@ +/* Linux driver for Philips webcam + Decompression frontend. + (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <asm/current.h> +#include <asm/types.h> + +#include "pwc.h" +#include "pwc-uncompress.h" + +int pwc_decompress(struct pwc_device *pdev) +{ + struct pwc_frame_buf *fbuf; + int n, line, col, stride; + void *yuv, *image; + u16 *src; + u16 *dsty, *dstu, *dstv; + + if (pdev == NULL) + return -EFAULT; +#if defined(__KERNEL__) && defined(PWC_MAGIC) + if (pdev->magic != PWC_MAGIC) { + Err("pwc_decompress(): magic failed.\n"); + return -EFAULT; + } +#endif + + fbuf = pdev->read_frame; + if (fbuf == NULL) + return -EFAULT; + image = pdev->image_ptr[pdev->fill_image]; + if (!image) + return -EFAULT; + + yuv = fbuf->data + pdev->frame_header_size; /* Skip header */ + + /* Raw format; that's easy... */ + if (pdev->vpalette == VIDEO_PALETTE_RAW) + { + memcpy(image, yuv, pdev->frame_size); + return 0; + } + + if (pdev->vbandlength == 0) { + /* Uncompressed mode. We copy the data into the output buffer, + using the viewport size (which may be larger than the image + size). Unfortunately we have to do a bit of byte stuffing + to get the desired output format/size. + */ + /* + * We do some byte shuffling here to go from the + * native format to YUV420P. + */ + src = (u16 *)yuv; + n = pdev->view.x * pdev->view.y; + + /* offset in Y plane */ + stride = pdev->view.x * pdev->offset.y + pdev->offset.x; + dsty = (u16 *)(image + stride); + + /* offsets in U/V planes */ + stride = pdev->view.x * pdev->offset.y / 4 + pdev->offset.x / 2; + dstu = (u16 *)(image + n + stride); + dstv = (u16 *)(image + n + n / 4 + stride); + + /* increment after each line */ + stride = (pdev->view.x - pdev->image.x) / 2; /* u16 is 2 bytes */ + + for (line = 0; line < pdev->image.y; line++) { + for (col = 0; col < pdev->image.x; col += 4) { + *dsty++ = *src++; + *dsty++ = *src++; + if (line & 1) + *dstv++ = *src++; + else + *dstu++ = *src++; + } + dsty += stride; + if (line & 1) + dstv += (stride >> 1); + else + dstu += (stride >> 1); + } + } + else { + /* Compressed; the decompressor routines will write the data + in planar format immediately. + */ + int flags; + + flags = PWCX_FLAG_PLANAR; + if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot) + { + printk(KERN_ERR "pwc: Mode Bayer is not supported for now\n"); + flags |= PWCX_FLAG_BAYER; + return -ENXIO; /* No such device or address: missing decompressor */ + } + +#if 0 + switch (pdev->type) + { + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: + pwc_dec23_decompress(&pdev->image, &pdev->view, + &pdev->offset, yuv, image, flags, + pdev->decompress_data, pdev->vbandlength); + break; + case 645: + case 646: + /* TODO & FIXME */ + return -ENXIO; /* Missing decompressor */ + break; + } +#endif + } + return 0; +} + + diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h new file mode 100644 index 00000000000..d3b9250e4ed --- /dev/null +++ b/drivers/media/video/pwc/pwc-uncompress.h @@ -0,0 +1,41 @@ +/* (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* This file is the bridge between the kernel module and the plugin; it + describes the structures and datatypes used in both modules. Any + significant change should be reflected by increasing the + pwc_decompressor_version major number. + */ +#ifndef PWC_UNCOMPRESS_H +#define PWC_UNCOMPRESS_H + +#include <linux/config.h> + +#include "pwc-ioctl.h" + +/* from pwc-dec.h */ +#define PWCX_FLAG_PLANAR 0x0001 +/* */ + +#endif diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h new file mode 100644 index 00000000000..6dd76bb3dff --- /dev/null +++ b/drivers/media/video/pwc/pwc.h @@ -0,0 +1,272 @@ +/* (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef PWC_H +#define PWC_H + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/spinlock.h> +#include <linux/videodev.h> +#include <linux/wait.h> +#include <linux/smp_lock.h> +#include <asm/semaphore.h> +#include <asm/errno.h> + +#include "pwc-uncompress.h" +#include "pwc-ioctl.h" + +/* Defines and structures for the Philips webcam */ +/* Used for checking memory corruption/pointer validation */ +#define PWC_MAGIC 0x89DC10ABUL +#undef PWC_MAGIC + +/* Turn some debugging options on/off */ +#define PWC_DEBUG 0 + +/* Trace certain actions in the driver */ +#define TRACE_MODULE 0x0001 +#define TRACE_PROBE 0x0002 +#define TRACE_OPEN 0x0004 +#define TRACE_READ 0x0008 +#define TRACE_MEMORY 0x0010 +#define TRACE_FLOW 0x0020 +#define TRACE_SIZE 0x0040 +#define TRACE_PWCX 0x0080 +#define TRACE_SEQUENCE 0x1000 + +#define Trace(R, A...) if (pwc_trace & R) printk(KERN_DEBUG PWC_NAME " " A) +#define Debug(A...) printk(KERN_DEBUG PWC_NAME " " A) +#define Info(A...) printk(KERN_INFO PWC_NAME " " A) +#define Err(A...) printk(KERN_ERR PWC_NAME " " A) + + +/* Defines for ToUCam cameras */ +#define TOUCAM_HEADER_SIZE 8 +#define TOUCAM_TRAILER_SIZE 4 + +#define FEATURE_MOTOR_PANTILT 0x0001 + +/* Version block */ +#define PWC_MAJOR 9 +#define PWC_MINOR 0 +#define PWC_VERSION "9.0.2-unofficial" +#define PWC_NAME "pwc" + +/* Turn certain features on/off */ +#define PWC_INT_PIPE 0 + +/* Ignore errors in the first N frames, to allow for startup delays */ +#define FRAME_LOWMARK 5 + +/* Size and number of buffers for the ISO pipe. */ +#define MAX_ISO_BUFS 2 +#define ISO_FRAMES_PER_DESC 10 +#define ISO_MAX_FRAME_SIZE 960 +#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) + +/* Frame buffers: contains compressed or uncompressed video data. */ +#define MAX_FRAMES 5 +/* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */ +#define PWC_FRAME_SIZE (460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE) + +/* Absolute maximum number of buffers available for mmap() */ +#define MAX_IMAGES 10 + +/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */ +struct pwc_iso_buf +{ + void *data; + int length; + int read; + struct urb *urb; +}; + +/* intermediate buffers with raw data from the USB cam */ +struct pwc_frame_buf +{ + void *data; + volatile int filled; /* number of bytes filled */ + struct pwc_frame_buf *next; /* list */ +#if PWC_DEBUG + int sequence; /* Sequence number */ +#endif +}; + +struct pwc_device +{ + struct video_device *vdev; +#ifdef PWC_MAGIC + int magic; +#endif + /* Pointer to our usb_device */ + struct usb_device *udev; + + int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ + int release; /* release number */ + int features; /* feature bits */ + char serial[30]; /* serial number (string) */ + int error_status; /* set when something goes wrong with the cam (unplugged, USB errors) */ + int usb_init; /* set when the cam has been initialized over USB */ + + /*** Video data ***/ + int vopen; /* flag */ + int vendpoint; /* video isoc endpoint */ + int vcinterface; /* video control interface */ + int valternate; /* alternate interface needed */ + int vframes, vsize; /* frames-per-second & size (see PSZ_*) */ + int vpalette; /* palette: 420P, RAW or RGBBAYER */ + int vframe_count; /* received frames */ + int vframes_dumped; /* counter for dumped frames */ + int vframes_error; /* frames received in error */ + int vmax_packet_size; /* USB maxpacket size */ + int vlast_packet_size; /* for frame synchronisation */ + int visoc_errors; /* number of contiguous ISOC errors */ + int vcompression; /* desired compression factor */ + int vbandlength; /* compressed band length; 0 is uncompressed */ + char vsnapshot; /* snapshot mode */ + char vsync; /* used by isoc handler */ + char vmirror; /* for ToUCaM series */ + + int cmd_len; + unsigned char cmd_buf[13]; + + /* The image acquisition requires 3 to 4 steps: + 1. data is gathered in short packets from the USB controller + 2. data is synchronized and packed into a frame buffer + 3a. in case data is compressed, decompress it directly into image buffer + 3b. in case data is uncompressed, copy into image buffer with viewport + 4. data is transferred to the user process + + Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES.... + We have in effect a back-to-back-double-buffer system. + */ + /* 1: isoc */ + struct pwc_iso_buf sbuf[MAX_ISO_BUFS]; + char iso_init; + + /* 2: frame */ + struct pwc_frame_buf *fbuf; /* all frames */ + struct pwc_frame_buf *empty_frames, *empty_frames_tail; /* all empty frames */ + struct pwc_frame_buf *full_frames, *full_frames_tail; /* all filled frames */ + struct pwc_frame_buf *fill_frame; /* frame currently being filled */ + struct pwc_frame_buf *read_frame; /* frame currently read by user process */ + int frame_header_size, frame_trailer_size; + int frame_size; + int frame_total_size; /* including header & trailer */ + int drop_frames; +#if PWC_DEBUG + int sequence; /* Debugging aid */ +#endif + + /* 3: decompression */ + struct pwc_decompressor *decompressor; /* function block with decompression routines */ + void *decompress_data; /* private data for decompression engine */ + + /* 4: image */ + /* We have an 'image' and a 'view', where 'image' is the fixed-size image + as delivered by the camera, and 'view' is the size requested by the + program. The camera image is centered in this viewport, laced with + a gray or black border. view_min <= image <= view <= view_max; + */ + int image_mask; /* bitmask of supported sizes */ + struct pwc_coord view_min, view_max; /* minimum and maximum viewable sizes */ + struct pwc_coord abs_max; /* maximum supported size with compression */ + struct pwc_coord image, view; /* image and viewport size */ + struct pwc_coord offset; /* offset within the viewport */ + + void *image_data; /* total buffer, which is subdivided into ... */ + void *image_ptr[MAX_IMAGES]; /* ...several images... */ + int fill_image; /* ...which are rotated. */ + int len_per_image; /* length per image */ + int image_read_pos; /* In case we read data in pieces, keep track of were we are in the imagebuffer */ + int image_used[MAX_IMAGES]; /* For MCAPTURE and SYNC */ + + struct semaphore modlock; /* to prevent races in video_open(), etc */ + spinlock_t ptrlock; /* for manipulating the buffer pointers */ + + /*** motorized pan/tilt feature */ + struct pwc_mpt_range angle_range; + int pan_angle; /* in degrees * 100 */ + int tilt_angle; /* absolute angle; 0,0 is home position */ + + /*** Misc. data ***/ + wait_queue_head_t frameq; /* When waiting for a frame to finish... */ +#if PWC_INT_PIPE + void *usb_int_handler; /* for the interrupt endpoint */ +#endif +}; + + +#ifdef __cplusplus +extern "C" { +#endif + +/* Global variable */ +extern int pwc_trace; + +/** functions in pwc-if.c */ +int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot); + +/** Functions in pwc-misc.c */ +/* sizes in pixels */ +extern struct pwc_coord pwc_image_sizes[PSZ_MAX]; + +int pwc_decode_size(struct pwc_device *pdev, int width, int height); +void pwc_construct(struct pwc_device *pdev); + +/** Functions in pwc-ctrl.c */ +/* Request a certain video mode. Returns < 0 if not possible */ +extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot); + +/* Various controls; should be obvious. Value 0..65535, or < 0 on error */ +extern int pwc_get_brightness(struct pwc_device *pdev); +extern int pwc_set_brightness(struct pwc_device *pdev, int value); +extern int pwc_get_contrast(struct pwc_device *pdev); +extern int pwc_set_contrast(struct pwc_device *pdev, int value); +extern int pwc_get_gamma(struct pwc_device *pdev); +extern int pwc_set_gamma(struct pwc_device *pdev, int value); +extern int pwc_get_saturation(struct pwc_device *pdev); +extern int pwc_set_saturation(struct pwc_device *pdev, int value); +extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value); +extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor); + +/* Power down or up the camera; not supported by all models */ +extern int pwc_camera_power(struct pwc_device *pdev, int power); + +/* Private ioctl()s; see pwc-ioctl.h */ +extern int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg); + + +/** pwc-uncompress.c */ +/* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */ +extern int pwc_decompress(struct pwc_device *pdev); + +#ifdef __cplusplus +} +#endif + + +#endif diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c new file mode 100644 index 00000000000..f03ea7f8959 --- /dev/null +++ b/drivers/media/video/se401.c @@ -0,0 +1,1435 @@ +/* + * Endpoints (formerly known as AOX) se401 USB Camera Driver + * + * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) + * + * Still somewhat based on the Linux ov511 driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * Thanks to Endpoints Inc. (www.endpoints.com) for making documentation on + * their chipset available and supporting me while writing this driver. + * - Jeroen Vreeken + */ + +static const char version[] = "0.24"; + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/pagemap.h> +#include <linux/usb.h> +#include "se401.h" + +static int flickerless=0; +static int video_nr = -1; + +static struct usb_device_id device_table [] = { + { USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */ + { USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */ + { USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */ + { USB_DEVICE(0x047d, 0x5002) },/* Kensington 6701(5/7) */ + { USB_DEVICE(0x047d, 0x5003) },/* Kensington 67016 */ + { } +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>"); +MODULE_DESCRIPTION("SE401 USB Camera Driver"); +MODULE_LICENSE("GPL"); +module_param(flickerless, int, 0); +MODULE_PARM_DESC(flickerless, "Net frequency to adjust exposure time to (0/50/60)"); +module_param(video_nr, int, 0); + +static struct usb_driver se401_driver; + + +/********************************************************************** + * + * Memory management + * + **********************************************************************/ +static void *rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + + + +/**************************************************************************** + * + * se401 register read/write functions + * + ***************************************************************************/ + +static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req, + unsigned short value, unsigned char *cp, int size) +{ + return usb_control_msg ( + se401->dev, + set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0), + req, + (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + 0, + cp, + size, + 1000 + ); +} + +static int se401_set_feature(struct usb_se401 *se401, unsigned short selector, + unsigned short param) +{ + /* specs say that the selector (address) should go in the value field + and the param in index, but in the logs of the windows driver they do + this the other way around... + */ + return usb_control_msg ( + se401->dev, + usb_sndctrlpipe(se401->dev, 0), + SE401_REQ_SET_EXT_FEATURE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + param, + selector, + NULL, + 0, + 1000 + ); +} + +static unsigned short se401_get_feature(struct usb_se401 *se401, + unsigned short selector) +{ + /* For 'set' the selecetor should be in index, not sure if the spec is + wrong here to.... + */ + unsigned char cp[2]; + usb_control_msg ( + se401->dev, + usb_rcvctrlpipe(se401->dev, 0), + SE401_REQ_GET_EXT_FEATURE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, + selector, + cp, + 2, + 1000 + ); + return cp[0]+cp[1]*256; +} + +/**************************************************************************** + * + * Camera control + * + ***************************************************************************/ + + +static int se401_send_pict(struct usb_se401 *se401) +{ + se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);/* integration time low */ + se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);/* integration time mid */ + se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);/* integration time mid */ + se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);/* reset level value */ + se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */ + se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */ + se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */ + + return 0; +} + +static void se401_set_exposure(struct usb_se401 *se401, int brightness) +{ + int integration=brightness<<5; + + if (flickerless==50) { + integration=integration-integration%106667; + } + if (flickerless==60) { + integration=integration-integration%88889; + } + se401->brightness=integration>>5; + se401->expose_h=(integration>>16)&0xff; + se401->expose_m=(integration>>8)&0xff; + se401->expose_l=integration&0xff; +} + +static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p) +{ + p->brightness=se401->brightness; + if (se401->enhance) { + p->whiteness=32768; + } else { + p->whiteness=0; + } + p->colour=65535; + p->contrast=65535; + p->hue=se401->rgain<<10; + p->palette=se401->palette; + p->depth=3; /* rgb24 */ + return 0; +} + + +static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p) +{ + if (p->palette != VIDEO_PALETTE_RGB24) + return 1; + se401->palette=p->palette; + if (p->hue!=se401->hue) { + se401->rgain= p->hue>>10; + se401->bgain= 0x40-(p->hue>>10); + se401->hue=p->hue; + } + if (p->brightness!=se401->brightness) { + se401_set_exposure(se401, p->brightness); + } + if (p->whiteness>=32768) { + se401->enhance=1; + } else { + se401->enhance=0; + } + se401_send_pict(se401); + se401_send_pict(se401); + return 0; +} + +/* + Hyundai have some really nice docs about this and other sensor related + stuff on their homepage: www.hei.co.kr +*/ +static void se401_auto_resetlevel(struct usb_se401 *se401) +{ + unsigned int ahrc, alrc; + int oldreset=se401->resetlevel; + + /* For some reason this normally read-only register doesn't get reset + to zero after reading them just once... + */ + se401_get_feature(se401, HV7131_REG_HIREFNOH); + se401_get_feature(se401, HV7131_REG_HIREFNOL); + se401_get_feature(se401, HV7131_REG_LOREFNOH); + se401_get_feature(se401, HV7131_REG_LOREFNOL); + ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) + + se401_get_feature(se401, HV7131_REG_HIREFNOL); + alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) + + se401_get_feature(se401, HV7131_REG_LOREFNOL); + + /* Not an exact science, but it seems to work pretty well... */ + if (alrc > 10) { + while (alrc>=10 && se401->resetlevel < 63) { + se401->resetlevel++; + alrc /=2; + } + } else if (ahrc > 20) { + while (ahrc>=20 && se401->resetlevel > 0) { + se401->resetlevel--; + ahrc /=2; + } + } + if (se401->resetlevel!=oldreset) + se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel); + + return; +} + +/* irq handler for snapshot button */ +static void se401_button_irq(struct urb *urb, struct pt_regs *regs) +{ + struct usb_se401 *se401 = urb->context; + int status; + + if (!se401->dev) { + info("ohoh: device vapourished"); + return; + } + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + if (urb->actual_length >=2) { + if (se401->button) + se401->buttonpressed=1; + } +exit: + status = usb_submit_urb (urb, GFP_ATOMIC); + if (status) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, status); +} + +static void se401_video_irq(struct urb *urb, struct pt_regs *regs) +{ + struct usb_se401 *se401 = urb->context; + int length = urb->actual_length; + + /* ohoh... */ + if (!se401->streaming) + return; + + if (!se401->dev) { + info ("ohoh: device vapourished"); + return; + } + + /* 0 sized packets happen if we are to fast, but sometimes the camera + keeps sending them forever... + */ + if (length && !urb->status) { + se401->nullpackets=0; + switch(se401->scratch[se401->scratch_next].state) { + case BUFFER_READY: + case BUFFER_BUSY: { + se401->dropped++; + break; + } + case BUFFER_UNUSED: { + memcpy(se401->scratch[se401->scratch_next].data, (unsigned char *)urb->transfer_buffer, length); + se401->scratch[se401->scratch_next].state=BUFFER_READY; + se401->scratch[se401->scratch_next].offset=se401->bayeroffset; + se401->scratch[se401->scratch_next].length=length; + if (waitqueue_active(&se401->wq)) { + wake_up_interruptible(&se401->wq); + } + se401->scratch_overflow=0; + se401->scratch_next++; + if (se401->scratch_next>=SE401_NUMSCRATCH) + se401->scratch_next=0; + break; + } + } + se401->bayeroffset+=length; + if (se401->bayeroffset>=se401->cheight*se401->cwidth) { + se401->bayeroffset=0; + } + } else { + se401->nullpackets++; + if (se401->nullpackets > SE401_MAX_NULLPACKETS) { + if (waitqueue_active(&se401->wq)) { + wake_up_interruptible(&se401->wq); + } + } + } + + /* Resubmit urb for new data */ + urb->status=0; + urb->dev=se401->dev; + if(usb_submit_urb(urb, GFP_KERNEL)) + info("urb burned down"); + return; +} + +static void se401_send_size(struct usb_se401 *se401, int width, int height) +{ + int i=0; + int mode=0x03; /* No compression */ + int sendheight=height; + int sendwidth=width; + + /* JangGu compression can only be used with the camera supported sizes, + but bayer seems to work with any size that fits on the sensor. + We check if we can use compression with the current size with either + 4 or 16 times subcapturing, if not we use uncompressed bayer data + but this will result in cutouts of the maximum size.... + */ + while (i<se401->sizes && !(se401->width[i]==width && se401->height[i]==height)) + i++; + while (i<se401->sizes) { + if (se401->width[i]==width*2 && se401->height[i]==height*2) { + sendheight=se401->height[i]; + sendwidth=se401->width[i]; + mode=0x40; + } + if (se401->width[i]==width*4 && se401->height[i]==height*4) { + sendheight=se401->height[i]; + sendwidth=se401->width[i]; + mode=0x42; + } + i++; + } + + se401_sndctrl(1, se401, SE401_REQ_SET_WIDTH, sendwidth, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0); + se401_set_feature(se401, SE401_OPERATINGMODE, mode); + + if (mode==0x03) { + se401->format=FMT_BAYER; + } else { + se401->format=FMT_JANGGU; + } + + return; +} + +/* + In this function se401_send_pict is called several times, + for some reason (depending on the state of the sensor and the phase of + the moon :) doing this only in either place doesn't always work... +*/ +static int se401_start_stream(struct usb_se401 *se401) +{ + struct urb *urb; + int err=0, i; + se401->streaming=1; + + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); + + /* Set picture settings */ + se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */ + se401_send_pict(se401); + + se401_send_size(se401, se401->cwidth, se401->cheight); + + se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, NULL, 0); + + /* Do some memory allocation */ + for (i=0; i<SE401_NUMFRAMES; i++) { + se401->frame[i].data=se401->fbuf + i * se401->maxframesize; + se401->frame[i].curpix=0; + } + for (i=0; i<SE401_NUMSBUF; i++) { + se401->sbuf[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + } + + se401->bayeroffset=0; + se401->scratch_next=0; + se401->scratch_use=0; + se401->scratch_overflow=0; + for (i=0; i<SE401_NUMSCRATCH; i++) { + se401->scratch[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + se401->scratch[i].state=BUFFER_UNUSED; + } + + for (i=0; i<SE401_NUMSBUF; i++) { + urb=usb_alloc_urb(0, GFP_KERNEL); + if(!urb) + return -ENOMEM; + + usb_fill_bulk_urb(urb, se401->dev, + usb_rcvbulkpipe(se401->dev, SE401_VIDEO_ENDPOINT), + se401->sbuf[i].data, SE401_PACKETSIZE, + se401_video_irq, + se401); + + se401->urb[i]=urb; + + err=usb_submit_urb(se401->urb[i], GFP_KERNEL); + if(err) + err("urb burned down"); + } + + se401->framecount=0; + + return 0; +} + +static int se401_stop_stream(struct usb_se401 *se401) +{ + int i; + + if (!se401->streaming || !se401->dev) + return 1; + + se401->streaming=0; + + se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0); + + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0); + + for (i=0; i<SE401_NUMSBUF; i++) if (se401->urb[i]) { + usb_kill_urb(se401->urb[i]); + usb_free_urb(se401->urb[i]); + se401->urb[i]=NULL; + kfree(se401->sbuf[i].data); + } + for (i=0; i<SE401_NUMSCRATCH; i++) { + kfree(se401->scratch[i].data); + se401->scratch[i].data=NULL; + } + + return 0; +} + +static int se401_set_size(struct usb_se401 *se401, int width, int height) +{ + int wasstreaming=se401->streaming; + /* Check to see if we need to change */ + if (se401->cwidth==width && se401->cheight==height) + return 0; + + /* Check for a valid mode */ + if (!width || !height) + return 1; + if ((width & 1) || (height & 1)) + return 1; + if (width>se401->width[se401->sizes-1]) + return 1; + if (height>se401->height[se401->sizes-1]) + return 1; + + /* Stop a current stream and start it again at the new size */ + if (wasstreaming) + se401_stop_stream(se401); + se401->cwidth=width; + se401->cheight=height; + if (wasstreaming) + se401_start_stream(se401); + return 0; +} + + +/**************************************************************************** + * + * Video Decoding + * + ***************************************************************************/ + +/* + This shouldn't really be done in a v4l driver.... + But it does make the image look a lot more usable. + Basically it lifts the dark pixels more than the light pixels. +*/ +static inline void enhance_picture(unsigned char *frame, int len) +{ + while (len--) { + *frame=(((*frame^255)*(*frame^255))/255)^255; + frame++; + } +} + +static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data) +{ + struct se401_frame *frame=&se401->frame[se401->curframe]; + int linelength=se401->cwidth*3; + + if (frame->curlinepix >= linelength) { + frame->curlinepix=0; + frame->curline+=linelength; + } + + /* First three are absolute, all others relative. + * Format is rgb from right to left (mirrorred image), + * we flip it to get bgr from left to right. */ + if (frame->curlinepix < 3) { + *(frame->curline-frame->curlinepix)=1+data*4; + } else { + *(frame->curline-frame->curlinepix)= + *(frame->curline-frame->curlinepix+3)+data*4; + } + frame->curlinepix++; +} + +static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *data, int bit_exp, int packetlength) +{ + int pos=0; + int vlc_cod=0; + int vlc_size=0; + int vlc_data=0; + int bit_cur; + int bit; + data+=4; + while (pos < packetlength) { + bit_cur=8; + while (bit_cur && bit_exp) { + bit=((*data)>>(bit_cur-1))&1; + if (!vlc_cod) { + if (bit) { + vlc_size++; + } else { + if (!vlc_size) { + decode_JangGu_integrate(se401, 0); + } else { + vlc_cod=2; + vlc_data=0; + } + } + } else { + if (vlc_cod==2) { + if (!bit) + vlc_data = -(1<<vlc_size) + 1; + vlc_cod--; + } + vlc_size--; + vlc_data+=bit<<vlc_size; + if (!vlc_size) { + decode_JangGu_integrate(se401, vlc_data); + vlc_cod=0; + } + } + bit_cur--; + bit_exp--; + } + pos++; + data++; + } +} + +static inline void decode_JangGu (struct usb_se401 *se401, struct se401_scratch *buffer) +{ + unsigned char *data=buffer->data; + int len=buffer->length; + int bit_exp=0, pix_exp=0, frameinfo=0, packetlength=0, size; + int datapos=0; + + /* New image? */ + if (!se401->frame[se401->curframe].curpix) { + se401->frame[se401->curframe].curlinepix=0; + se401->frame[se401->curframe].curline= + se401->frame[se401->curframe].data+ + se401->cwidth*3-1; + if (se401->frame[se401->curframe].grabstate==FRAME_READY) + se401->frame[se401->curframe].grabstate=FRAME_GRABBING; + se401->vlcdatapos=0; + } + while (datapos < len) { + size=1024-se401->vlcdatapos; + if (size+datapos > len) + size=len-datapos; + memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size); + se401->vlcdatapos+=size; + packetlength=0; + if (se401->vlcdatapos >= 4) { + bit_exp=se401->vlcdata[3]+(se401->vlcdata[2]<<8); + pix_exp=se401->vlcdata[1]+((se401->vlcdata[0]&0x3f)<<8); + frameinfo=se401->vlcdata[0]&0xc0; + packetlength=((bit_exp+47)>>4)<<1; + if (packetlength > 1024) { + se401->vlcdatapos=0; + datapos=len; + packetlength=0; + se401->error++; + se401->frame[se401->curframe].curpix=0; + } + } + if (packetlength && se401->vlcdatapos >= packetlength) { + decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, packetlength); + se401->frame[se401->curframe].curpix+=pix_exp*3; + datapos+=size-(se401->vlcdatapos-packetlength); + se401->vlcdatapos=0; + if (se401->frame[se401->curframe].curpix>=se401->cwidth*se401->cheight*3) { + if (se401->frame[se401->curframe].curpix==se401->cwidth*se401->cheight*3) { + if (se401->frame[se401->curframe].grabstate==FRAME_GRABBING) { + se401->frame[se401->curframe].grabstate=FRAME_DONE; + se401->framecount++; + se401->readcount++; + } + if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { + se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); + } + } else { + se401->error++; + } + se401->frame[se401->curframe].curpix=0; + datapos=len; + } + } else { + datapos+=size; + } + } +} + +static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *buffer) +{ + unsigned char *data=buffer->data; + int len=buffer->length; + int offset=buffer->offset; + int datasize=se401->cwidth*se401->cheight; + struct se401_frame *frame=&se401->frame[se401->curframe]; + + unsigned char *framedata=frame->data, *curline, *nextline; + int width=se401->cwidth; + int blineoffset=0, bline; + int linelength=width*3, i; + + + if (frame->curpix==0) { + if (frame->grabstate==FRAME_READY) { + frame->grabstate=FRAME_GRABBING; + } + frame->curline=framedata+linelength; + frame->curlinepix=0; + } + + if (offset!=frame->curpix) { + /* Regard frame as lost :( */ + frame->curpix=0; + se401->error++; + return; + } + + /* Check if we have to much data */ + if (frame->curpix+len > datasize) { + len=datasize-frame->curpix; + } + if (se401->cheight%4) + blineoffset=1; + bline=frame->curpix/se401->cwidth+blineoffset; + + curline=frame->curline; + nextline=curline+linelength; + if (nextline >= framedata+datasize*3) + nextline=curline; + while (len) { + if (frame->curlinepix>=width) { + frame->curlinepix-=width; + bline=frame->curpix/width+blineoffset; + curline+=linelength*2; + nextline+=linelength*2; + if (curline >= framedata+datasize*3) { + frame->curlinepix++; + curline-=3; + nextline-=3; + len--; + data++; + frame->curpix++; + } + if (nextline >= framedata+datasize*3) + nextline=curline; + } + if ((bline&1)) { + if ((frame->curlinepix&1)) { + *(curline+2)=*data; + *(curline-1)=*data; + *(nextline+2)=*data; + *(nextline-1)=*data; + } else { + *(curline+1)= + (*(curline+1)+*data)/2; + *(curline-2)= + (*(curline-2)+*data)/2; + *(nextline+1)=*data; + *(nextline-2)=*data; + } + } else { + if ((frame->curlinepix&1)) { + *(curline+1)= + (*(curline+1)+*data)/2; + *(curline-2)= + (*(curline-2)+*data)/2; + *(nextline+1)=*data; + *(nextline-2)=*data; + } else { + *curline=*data; + *(curline-3)=*data; + *nextline=*data; + *(nextline-3)=*data; + } + } + frame->curlinepix++; + curline-=3; + nextline-=3; + len--; + data++; + frame->curpix++; + } + frame->curline=curline; + + if (frame->curpix>=datasize) { + /* Fix the top line */ + framedata+=linelength; + for (i=0; i<linelength; i++) { + framedata--; + *framedata=*(framedata+linelength); + } + /* Fix the left side (green is already present) */ + for (i=0; i<se401->cheight; i++) { + *framedata=*(framedata+3); + *(framedata+1)=*(framedata+4); + *(framedata+2)=*(framedata+5); + framedata+=linelength; + } + frame->curpix=0; + frame->grabstate=FRAME_DONE; + se401->framecount++; + se401->readcount++; + if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { + se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); + } + } +} + +static int se401_newframe(struct usb_se401 *se401, int framenr) +{ + DECLARE_WAITQUEUE(wait, current); + int errors=0; + + while (se401->streaming && + (se401->frame[framenr].grabstate==FRAME_READY || + se401->frame[framenr].grabstate==FRAME_GRABBING) ) { + if(!se401->frame[framenr].curpix) { + errors++; + } + wait_interruptible( + se401->scratch[se401->scratch_use].state!=BUFFER_READY, + &se401->wq, + &wait + ); + if (se401->nullpackets > SE401_MAX_NULLPACKETS) { + se401->nullpackets=0; + info("to many null length packets, restarting capture"); + se401_stop_stream(se401); + se401_start_stream(se401); + } else { + if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) { + se401->frame[framenr].grabstate=FRAME_ERROR; + return -EIO; + } + se401->scratch[se401->scratch_use].state=BUFFER_BUSY; + if (se401->format==FMT_JANGGU) { + decode_JangGu(se401, &se401->scratch[se401->scratch_use]); + } else { + decode_bayer(se401, &se401->scratch[se401->scratch_use]); + } + se401->scratch[se401->scratch_use].state=BUFFER_UNUSED; + se401->scratch_use++; + if (se401->scratch_use>=SE401_NUMSCRATCH) + se401->scratch_use=0; + if (errors > SE401_MAX_ERRORS) { + errors=0; + info("to much errors, restarting capture"); + se401_stop_stream(se401); + se401_start_stream(se401); + } + } + } + + if (se401->frame[framenr].grabstate==FRAME_DONE) + if (se401->enhance) + enhance_picture(se401->frame[framenr].data, se401->cheight*se401->cwidth*3); + return 0; +} + +static void usb_se401_remove_disconnected (struct usb_se401 *se401) +{ + int i; + + se401->dev = NULL; + + for (i=0; i<SE401_NUMSBUF; i++) + if (se401->urb[i]) { + usb_kill_urb(se401->urb[i]); + usb_free_urb(se401->urb[i]); + se401->urb[i] = NULL; + kfree(se401->sbuf[i].data); + } + for (i=0; i<SE401_NUMSCRATCH; i++) { + kfree(se401->scratch[i].data); + } + if (se401->inturb) { + usb_kill_urb(se401->inturb); + usb_free_urb(se401->inturb); + } + info("%s disconnected", se401->camera_name); + + /* Free the memory */ + kfree(se401->width); + kfree(se401->height); + kfree(se401); +} + + + +/**************************************************************************** + * + * Video4Linux + * + ***************************************************************************/ + + +static int se401_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_se401 *se401 = (struct usb_se401 *)dev; + int err = 0; + + if (se401->user) + return -EBUSY; + se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES); + if (se401->fbuf) + file->private_data = dev; + else + err = -ENOMEM; + se401->user = !err; + + return err; +} + +static int se401_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)dev; + int i; + + rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES); + if (se401->removed) { + usb_se401_remove_disconnected(se401); + info("device unregistered"); + } else { + for (i=0; i<SE401_NUMFRAMES; i++) + se401->frame[i].grabstate=FRAME_UNUSED; + if (se401->streaming) + se401_stop_stream(se401); + se401->user=0; + } + file->private_data = NULL; + return 0; +} + +static int se401_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)vdev; + + if (!se401->dev) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + strcpy(b->name, se401->camera_name); + b->type = VID_TYPE_CAPTURE; + b->channels = 1; + b->audios = 0; + b->maxwidth = se401->width[se401->sizes-1]; + b->maxheight = se401->height[se401->sizes-1]; + b->minwidth = se401->width[0]; + b->minheight = se401->height[0]; + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + v->flags = 0; + v->tuners = 0; + v->type = VIDEO_TYPE_CAMERA; + strcpy(v->name, "Camera"); + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *p = arg; + + se401_get_pict(se401, p); + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *p = arg; + + if (se401_set_pict(se401, p)) + return -EINVAL; + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (se401_set_size(se401, vw->width, vw->height)) + return -EINVAL; + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + vw->x = 0; /* FIXME */ + vw->y = 0; + vw->chromakey = 0; + vw->flags = 0; + vw->clipcount = 0; + vw->width = se401->cwidth; + vw->height = se401->cheight; + return 0; + } + case VIDIOCGMBUF: + { + struct video_mbuf *vm = arg; + int i; + + memset(vm, 0, sizeof(*vm)); + vm->size = SE401_NUMFRAMES * se401->maxframesize; + vm->frames = SE401_NUMFRAMES; + for (i=0; i<SE401_NUMFRAMES; i++) + vm->offsets[i] = se401->maxframesize * i; + return 0; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *vm = arg; + + if (vm->format != VIDEO_PALETTE_RGB24) + return -EINVAL; + if (vm->frame >= SE401_NUMFRAMES) + return -EINVAL; + if (se401->frame[vm->frame].grabstate != FRAME_UNUSED) + return -EBUSY; + + /* Is this according to the v4l spec??? */ + if (se401_set_size(se401, vm->width, vm->height)) + return -EINVAL; + se401->frame[vm->frame].grabstate=FRAME_READY; + + if (!se401->streaming) + se401_start_stream(se401); + + /* Set the picture properties */ + if (se401->framecount==0) + se401_send_pict(se401); + /* Calibrate the reset level after a few frames. */ + if (se401->framecount%20==1) + se401_auto_resetlevel(se401); + + return 0; + } + case VIDIOCSYNC: + { + int *frame = arg; + int ret=0; + + if(*frame <0 || *frame >= SE401_NUMFRAMES) + return -EINVAL; + + ret=se401_newframe(se401, *frame); + se401->frame[*frame].grabstate=FRAME_UNUSED; + return ret; + } + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + memset(vb, 0, sizeof(*vb)); + return 0; + } + case VIDIOCKEY: + return 0; + case VIDIOCCAPTURE: + return -EINVAL; + case VIDIOCSFBUF: + return -EINVAL; + case VIDIOCGTUNER: + case VIDIOCSTUNER: + return -EINVAL; + case VIDIOCGFREQ: + case VIDIOCSFREQ: + return -EINVAL; + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + default: + return -ENOIOCTLCMD; + } /* end switch */ + + return 0; +} + +static int se401_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, se401_do_ioctl); +} + +static ssize_t se401_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int realcount=count, ret=0; + struct video_device *dev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)dev; + + + if (se401->dev == NULL) + return -EIO; + if (realcount > se401->cwidth*se401->cheight*3) + realcount=se401->cwidth*se401->cheight*3; + + /* Shouldn't happen: */ + if (se401->frame[0].grabstate==FRAME_GRABBING) + return -EBUSY; + se401->frame[0].grabstate=FRAME_READY; + se401->frame[1].grabstate=FRAME_UNUSED; + se401->curframe=0; + + if (!se401->streaming) + se401_start_stream(se401); + + /* Set the picture properties */ + if (se401->framecount==0) + se401_send_pict(se401); + /* Calibrate the reset level after a few frames. */ + if (se401->framecount%20==1) + se401_auto_resetlevel(se401); + + ret=se401_newframe(se401, 0); + + se401->frame[0].grabstate=FRAME_UNUSED; + if (ret) + return ret; + if (copy_to_user(buf, se401->frame[0].data, realcount)) + return -EFAULT; + + return realcount; +} + +static int se401_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *dev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)dev; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + mutex_lock(&se401->lock); + + if (se401->dev == NULL) { + mutex_unlock(&se401->lock); + return -EIO; + } + if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) { + mutex_unlock(&se401->lock); + return -EINVAL; + } + pos = (unsigned long)se401->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&se401->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + mutex_unlock(&se401->lock); + + return 0; +} + +static struct file_operations se401_fops = { + .owner = THIS_MODULE, + .open = se401_open, + .release = se401_close, + .read = se401_read, + .mmap = se401_mmap, + .ioctl = se401_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static struct video_device se401_template = { + .owner = THIS_MODULE, + .name = "se401 USB camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_SE401, + .fops = &se401_fops, +}; + + + +/***************************/ +static int se401_init(struct usb_se401 *se401, int button) +{ + int i=0, rc; + unsigned char cp[0x40]; + char temp[200]; + + /* led on */ + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); + + /* get camera descriptor */ + rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp)); + if (cp[1]!=0x41) { + err("Wrong descriptor type"); + return 1; + } + sprintf (temp, "ExtraFeatures: %d", cp[3]); + + se401->sizes=cp[4]+cp[5]*256; + se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + if (!se401->width) + return 1; + se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + if (!se401->height) { + kfree(se401->width); + return 1; + } + for (i=0; i<se401->sizes; i++) { + se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256; + se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256; + } + sprintf (temp, "%s Sizes:", temp); + for (i=0; i<se401->sizes; i++) { + sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]); + } + info("%s", temp); + se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3; + + rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); + se401->cwidth=cp[0]+cp[1]*256; + rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); + se401->cheight=cp[0]+cp[1]*256; + + if (!cp[2] && SE401_FORMAT_BAYER) { + err("Bayer format not supported!"); + return 1; + } + /* set output mode (BAYER) */ + se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0); + + rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp)); + se401->brightness=cp[0]+cp[1]*256; + /* some default values */ + se401->resetlevel=0x2d; + se401->rgain=0x20; + se401->ggain=0x20; + se401->bgain=0x20; + se401_set_exposure(se401, 20000); + se401->palette=VIDEO_PALETTE_RGB24; + se401->enhance=1; + se401->dropped=0; + se401->error=0; + se401->framecount=0; + se401->readcount=0; + + /* Start interrupt transfers for snapshot button */ + if (button) { + se401->inturb=usb_alloc_urb(0, GFP_KERNEL); + if (!se401->inturb) { + info("Allocation of inturb failed"); + return 1; + } + usb_fill_int_urb(se401->inturb, se401->dev, + usb_rcvintpipe(se401->dev, SE401_BUTTON_ENDPOINT), + &se401->button, sizeof(se401->button), + se401_button_irq, + se401, + 8 + ); + if (usb_submit_urb(se401->inturb, GFP_KERNEL)) { + info("int urb burned down"); + return 1; + } + } else + se401->inturb=NULL; + + /* Flash the led */ + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0); + + return 0; +} + +static int se401_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_interface_descriptor *interface; + struct usb_se401 *se401; + char *camera_name=NULL; + int button=1; + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + interface = &intf->cur_altsetting->desc; + + /* Is it an se401? */ + if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 && + le16_to_cpu(dev->descriptor.idProduct) == 0x0004) { + camera_name="Endpoints/Aox SE401"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 && + le16_to_cpu(dev->descriptor.idProduct) == 0x030b) { + camera_name="Philips PCVC665K"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5001) { + camera_name="Kensington VideoCAM 67014"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5002) { + camera_name="Kensington VideoCAM 6701(5/7)"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5003) { + camera_name="Kensington VideoCAM 67016"; + button=0; + } else + return -ENODEV; + + /* Checking vendor/product should be enough, but what the hell */ + if (interface->bInterfaceClass != 0x00) + return -ENODEV; + if (interface->bInterfaceSubClass != 0x00) + return -ENODEV; + + /* We found one */ + info("SE401 camera found: %s", camera_name); + + if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) { + err("couldn't kmalloc se401 struct"); + return -ENOMEM; + } + + se401->dev = dev; + se401->iface = interface->bInterfaceNumber; + se401->camera_name = camera_name; + + info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255); + + if (se401_init(se401, button)) { + kfree(se401); + return -EIO; + } + + memcpy(&se401->vdev, &se401_template, sizeof(se401_template)); + memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name)); + init_waitqueue_head(&se401->wq); + mutex_init(&se401->lock); + wmb(); + + if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + kfree(se401); + err("video_register_device failed"); + return -EIO; + } + info("registered new video device: video%d", se401->vdev.minor); + + usb_set_intfdata (intf, se401); + return 0; +} + +static void se401_disconnect(struct usb_interface *intf) +{ + struct usb_se401 *se401 = usb_get_intfdata (intf); + + usb_set_intfdata (intf, NULL); + if (se401) { + video_unregister_device(&se401->vdev); + if (!se401->user){ + usb_se401_remove_disconnected(se401); + } else { + se401->frame[0].grabstate = FRAME_ERROR; + se401->frame[0].grabstate = FRAME_ERROR; + + se401->streaming = 0; + + wake_up_interruptible(&se401->wq); + se401->removed = 1; + } + } +} + +static struct usb_driver se401_driver = { + .name = "se401", + .id_table = device_table, + .probe = se401_probe, + .disconnect = se401_disconnect, +}; + + + +/**************************************************************************** + * + * Module routines + * + ***************************************************************************/ + +static int __init usb_se401_init(void) +{ + info("SE401 usb camera driver version %s registering", version); + if (flickerless) + if (flickerless!=50 && flickerless!=60) { + info("Invallid flickerless value, use 0, 50 or 60."); + return -1; + } + return usb_register(&se401_driver); +} + +static void __exit usb_se401_exit(void) +{ + usb_deregister(&se401_driver); + info("SE401 driver deregistered"); +} + +module_init(usb_se401_init); +module_exit(usb_se401_exit); diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h new file mode 100644 index 00000000000..e88a40d4c86 --- /dev/null +++ b/drivers/media/video/se401.h @@ -0,0 +1,234 @@ + +#ifndef __LINUX_se401_H +#define __LINUX_se401_H + +#include <asm/uaccess.h> +#include <linux/videodev.h> +#include <linux/smp_lock.h> +#include <linux/mutex.h> + +#define se401_DEBUG /* Turn on debug messages */ + +#ifdef se401_DEBUG +# define PDEBUG(level, fmt, args...) \ +if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args) +#else +# define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +/* An almost drop-in replacement for sleep_on_interruptible */ +#define wait_interruptible(test, queue, wait) \ +{ \ + add_wait_queue(queue, wait); \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (test) \ + schedule(); \ + remove_wait_queue(queue, wait); \ + set_current_state(TASK_RUNNING); \ + if (signal_pending(current)) \ + break; \ +} + +#define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06 +#define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41 +#define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42 +#define SE401_REQ_CAPTURE_FRAME 0x43 +#define SE401_REQ_GET_BRT 0x44 +#define SE401_REQ_SET_BRT 0x45 +#define SE401_REQ_GET_WIDTH 0x4c +#define SE401_REQ_SET_WIDTH 0x4d +#define SE401_REQ_GET_HEIGHT 0x4e +#define SE401_REQ_SET_HEIGHT 0x4f +#define SE401_REQ_GET_OUTPUT_MODE 0x50 +#define SE401_REQ_SET_OUTPUT_MODE 0x51 +#define SE401_REQ_GET_EXT_FEATURE 0x52 +#define SE401_REQ_SET_EXT_FEATURE 0x53 +#define SE401_REQ_CAMERA_POWER 0x56 +#define SE401_REQ_LED_CONTROL 0x57 +#define SE401_REQ_BIOS 0xff + +#define SE401_BIOS_READ 0x07 + +#define SE401_FORMAT_BAYER 0x40 + +/* Hyundai hv7131b registers + 7121 and 7141 should be the same (haven't really checked...) */ +/* Mode registers: */ +#define HV7131_REG_MODE_A 0x00 +#define HV7131_REG_MODE_B 0x01 +#define HV7131_REG_MODE_C 0x02 +/* Frame registers: */ +#define HV7131_REG_FRSU 0x10 +#define HV7131_REG_FRSL 0x11 +#define HV7131_REG_FCSU 0x12 +#define HV7131_REG_FCSL 0x13 +#define HV7131_REG_FWHU 0x14 +#define HV7131_REG_FWHL 0x15 +#define HV7131_REG_FWWU 0x16 +#define HV7131_REG_FWWL 0x17 +/* Timing registers: */ +#define HV7131_REG_THBU 0x20 +#define HV7131_REG_THBL 0x21 +#define HV7131_REG_TVBU 0x22 +#define HV7131_REG_TVBL 0x23 +#define HV7131_REG_TITU 0x25 +#define HV7131_REG_TITM 0x26 +#define HV7131_REG_TITL 0x27 +#define HV7131_REG_TMCD 0x28 +/* Adjust Registers: */ +#define HV7131_REG_ARLV 0x30 +#define HV7131_REG_ARCG 0x31 +#define HV7131_REG_AGCG 0x32 +#define HV7131_REG_ABCG 0x33 +#define HV7131_REG_APBV 0x34 +#define HV7131_REG_ASLP 0x54 +/* Offset Registers: */ +#define HV7131_REG_OFSR 0x50 +#define HV7131_REG_OFSG 0x51 +#define HV7131_REG_OFSB 0x52 +/* REset level statistics registers: */ +#define HV7131_REG_LOREFNOH 0x57 +#define HV7131_REG_LOREFNOL 0x58 +#define HV7131_REG_HIREFNOH 0x59 +#define HV7131_REG_HIREFNOL 0x5a + +/* se401 registers */ +#define SE401_OPERATINGMODE 0x2000 + + +/* size of usb transfers */ +#define SE401_PACKETSIZE 4096 +/* number of queued bulk transfers to use, should be about 8 */ +#define SE401_NUMSBUF 1 +/* read the usb specs for this one :) */ +#define SE401_VIDEO_ENDPOINT 1 +#define SE401_BUTTON_ENDPOINT 2 +/* number of frames supported by the v4l part */ +#define SE401_NUMFRAMES 2 +/* scratch buffers for passing data to the decoders */ +#define SE401_NUMSCRATCH 32 +/* maximum amount of data in a JangGu packet */ +#define SE401_VLCDATALEN 1024 +/* number of nul sized packets to receive before kicking the camera */ +#define SE401_MAX_NULLPACKETS 4000 +/* number of decoding errors before kicking the camera */ +#define SE401_MAX_ERRORS 200 + +struct usb_device; + +struct se401_sbuf { + unsigned char *data; +}; + +enum { + FRAME_UNUSED, /* Unused (no MCAPTURE) */ + FRAME_READY, /* Ready to start grabbing */ + FRAME_GRABBING, /* In the process of being grabbed into */ + FRAME_DONE, /* Finished grabbing, but not been synced yet */ + FRAME_ERROR, /* Something bad happened while processing */ +}; + +enum { + FMT_BAYER, + FMT_JANGGU, +}; + +enum { + BUFFER_UNUSED, + BUFFER_READY, + BUFFER_BUSY, + BUFFER_DONE, +}; + +struct se401_scratch { + unsigned char *data; + volatile int state; + int offset; + int length; +}; + +struct se401_frame { + unsigned char *data; /* Frame buffer */ + + volatile int grabstate; /* State of grabbing */ + + unsigned char *curline; + int curlinepix; + int curpix; +}; + +struct usb_se401 { + struct video_device vdev; + + /* Device structure */ + struct usb_device *dev; + + unsigned char iface; + + char *camera_name; + + int change; + int brightness; + int hue; + int rgain; + int ggain; + int bgain; + int expose_h; + int expose_m; + int expose_l; + int resetlevel; + + int enhance; + + int format; + int sizes; + int *width; + int *height; + int cwidth; /* current width */ + int cheight; /* current height */ + int palette; + int maxframesize; + int cframesize; /* current framesize */ + + struct mutex lock; + int user; /* user count for exclusive use */ + int removed; /* device disconnected */ + + int streaming; /* Are we streaming video? */ + + char *fbuf; /* Videodev buffer area */ + + struct urb *urb[SE401_NUMSBUF]; + struct urb *inturb; + + int button; + int buttonpressed; + + int curframe; /* Current receiving frame */ + struct se401_frame frame[SE401_NUMFRAMES]; + int readcount; + int framecount; + int error; + int dropped; + + int scratch_next; + int scratch_use; + int scratch_overflow; + struct se401_scratch scratch[SE401_NUMSCRATCH]; + + /* Decoder specific data: */ + unsigned char vlcdata[SE401_VLCDATALEN]; + int vlcdatapos; + int bayeroffset; + + struct se401_sbuf sbuf[SE401_NUMSBUF]; + + wait_queue_head_t wq; /* Processes waiting */ + + int nullpackets; +}; + + + +#endif + diff --git a/drivers/media/video/sn9c102/Makefile b/drivers/media/video/sn9c102/Makefile new file mode 100644 index 00000000000..8bcb0f71d69 --- /dev/null +++ b/drivers/media/video/sn9c102/Makefile @@ -0,0 +1,7 @@ +sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \ + sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \ + sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \ + sn9c102_tas5130d1b.o + +obj-$(CONFIG_USB_SN9C102) += sn9c102.o + diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h new file mode 100644 index 00000000000..1d70a62b9f2 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102.h @@ -0,0 +1,218 @@ +/*************************************************************************** + * V4L2 driver for SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _SN9C102_H_ +#define _SN9C102_H_ + +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <linux/param.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> +#include <linux/string.h> +#include <linux/stddef.h> + +#include "sn9c102_sensor.h" + +/*****************************************************************************/ + +#define SN9C102_DEBUG +#define SN9C102_DEBUG_LEVEL 2 +#define SN9C102_MAX_DEVICES 64 +#define SN9C102_PRESERVE_IMGSCALE 0 +#define SN9C102_FORCE_MUNMAP 0 +#define SN9C102_MAX_FRAMES 32 +#define SN9C102_URBS 2 +#define SN9C102_ISO_PACKETS 7 +#define SN9C102_ALTERNATE_SETTING 8 +#define SN9C102_URB_TIMEOUT msecs_to_jiffies(2 * SN9C102_ISO_PACKETS) +#define SN9C102_CTRL_TIMEOUT 300 +#define SN9C102_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +enum sn9c102_bridge { + BRIDGE_SN9C101 = 0x01, + BRIDGE_SN9C102 = 0x02, + BRIDGE_SN9C103 = 0x04, +}; + +SN9C102_ID_TABLE +SN9C102_SENSOR_TABLE + +enum sn9c102_frame_state { + F_UNUSED, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +struct sn9c102_frame_t { + void* bufmem; + struct v4l2_buffer buf; + enum sn9c102_frame_state state; + struct list_head frame; + unsigned long vma_use_count; +}; + +enum sn9c102_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +enum sn9c102_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum sn9c102_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +typedef char sn9c103_sof_header_t[18]; +typedef char sn9c102_sof_header_t[12]; +typedef char sn9c102_eof_header_t[4]; + +struct sn9c102_sysfs_attr { + u8 reg, i2c_reg; + sn9c103_sof_header_t frame_header; +}; + +struct sn9c102_module_param { + u8 force_munmap; + u16 frame_timeout; +}; + +static DEFINE_MUTEX(sn9c102_sysfs_lock); +static DECLARE_RWSEM(sn9c102_disconnect); + +struct sn9c102_device { + struct video_device* v4ldev; + + enum sn9c102_bridge bridge; + struct sn9c102_sensor sensor; + + struct usb_device* usbdev; + struct urb* urb[SN9C102_URBS]; + void* transfer_buffer[SN9C102_URBS]; + u8* control_buffer; + + struct sn9c102_frame_t *frame_current, frame[SN9C102_MAX_FRAMES]; + struct list_head inqueue, outqueue; + u32 frame_count, nbuffers, nreadbuffers; + + enum sn9c102_io_method io; + enum sn9c102_stream_state stream; + + struct v4l2_jpegcompression compression; + + struct sn9c102_sysfs_attr sysfs; + sn9c103_sof_header_t sof_header; + u16 reg[63]; + + struct sn9c102_module_param module_param; + + enum sn9c102_dev_state state; + u8 users; + + struct mutex dev_mutex, fileop_mutex; + spinlock_t queue_lock; + wait_queue_head_t open, wait_frame, wait_stream; +}; + +/*****************************************************************************/ + +struct sn9c102_device* +sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id) +{ + if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id)) + return cam; + + return NULL; +} + + +void +sn9c102_attach_sensor(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor) +{ + memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor)); +} + +/*****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef SN9C102_DEBUG +# define DBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1) \ + dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) == 2) \ + dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) >= 3) \ + dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} while (0) +# define V4LDBG(level, name, cmd) \ +do { \ + if (debug >= (level)) \ + v4l_print_ioctl(name, cmd); \ +} while (0) +# define KDBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1 || (level) == 2) \ + pr_info("sn9c102: " fmt "\n", ## args); \ + else if ((level) == 3) \ + pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} while (0) +#else +# define DBG(level, fmt, args...) do {;} while(0) +# define V4LDBG(level, name, cmd) do {;} while(0) +# define KDBG(level, fmt, args...) do {;} while(0) +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args) + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ + +#endif /* _SN9C102_H_ */ diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c new file mode 100644 index 00000000000..4c6cc639572 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -0,0 +1,2919 @@ +/*************************************************************************** + * V4L2 driver for SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/byteorder/generic.h> +#include <asm/page.h> +#include <asm/uaccess.h> + +#include "sn9c102.h" + +/*****************************************************************************/ + +#define SN9C102_MODULE_NAME "V4L2 driver for SN9C10x PC Camera Controllers" +#define SN9C102_MODULE_AUTHOR "(C) 2004-2006 Luca Risolia" +#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define SN9C102_MODULE_LICENSE "GPL" +#define SN9C102_MODULE_VERSION "1:1.27" +#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 27) + +/*****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, sn9c102_id_table); + +MODULE_AUTHOR(SN9C102_MODULE_AUTHOR " " SN9C102_AUTHOR_EMAIL); +MODULE_DESCRIPTION(SN9C102_MODULE_NAME); +MODULE_VERSION(SN9C102_MODULE_VERSION); +MODULE_LICENSE(SN9C102_MODULE_LICENSE); + +static short video_nr[] = {[0 ... SN9C102_MAX_DEVICES-1] = -1}; +module_param_array(video_nr, short, NULL, 0444); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L2 minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to "__MODULE_STRING(SN9C102_MAX_DEVICES) + " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second camera and use auto for the first" + "\none and for every other camera." + "\n"); + +static short force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] = + SN9C102_FORCE_MUNMAP}; +module_param_array(force_munmap, bool, NULL, 0444); +MODULE_PARM_DESC(force_munmap, + "\n<0|1[,...]> Force the application to unmap previously" + "\nmapped buffer memory before calling any VIDIOC_S_CROP or" + "\nVIDIOC_S_FMT ioctl's. Not all the applications support" + "\nthis feature. This parameter is specific for each" + "\ndetected camera." + "\n 0 = do not force memory unmapping" + "\n 1 = force memory unmapping (save memory)" + "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"." + "\n"); + +static unsigned int frame_timeout[] = {[0 ... SN9C102_MAX_DEVICES-1] = + SN9C102_FRAME_TIMEOUT}; +module_param_array(frame_timeout, uint, NULL, 0644); +MODULE_PARM_DESC(frame_timeout, + "\n<n[,...]> Timeout for a video frame in seconds." + "\nThis parameter is specific for each detected camera." + "\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"." + "\n"); + +#ifdef SN9C102_DEBUG +static unsigned short debug = SN9C102_DEBUG_LEVEL; +module_param(debug, ushort, 0644); +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 3:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = more verbose messages" + "\nLevel 3 is useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(SN9C102_DEBUG_LEVEL)"." + "\n"); +#endif + +/*****************************************************************************/ + +static sn9c102_sof_header_t sn9c102_sof_header[] = { + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x00}, + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01}, +}; + +static sn9c103_sof_header_t sn9c103_sof_header[] = { + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20}, +}; + +static sn9c102_eof_header_t sn9c102_eof_header[] = { + {0x00, 0x00, 0x00, 0x00}, + {0x40, 0x00, 0x00, 0x00}, + {0x80, 0x00, 0x00, 0x00}, + {0xc0, 0x00, 0x00, 0x00}, +}; + +/*****************************************************************************/ + +static u32 +sn9c102_request_buffers(struct sn9c102_device* cam, u32 count, + enum sn9c102_io_method io) +{ + struct v4l2_pix_format* p = &(cam->sensor.pix_format); + struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); + const size_t imagesize = cam->module_param.force_munmap || + io == IO_READ ? + (p->width * p->height * p->priv) / 8 : + (r->width * r->height * p->priv) / 8; + void* buff = NULL; + u32 i; + + if (count > SN9C102_MAX_FRAMES) + count = SN9C102_MAX_FRAMES; + + cam->nbuffers = count; + while (cam->nbuffers > 0) { + if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize)))) + break; + cam->nbuffers--; + } + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.index = i; + cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.length = imagesize; + cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->frame[i].buf.sequence = 0; + cam->frame[i].buf.field = V4L2_FIELD_NONE; + cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; + cam->frame[i].buf.flags = 0; + } + + return cam->nbuffers; +} + + +static void sn9c102_release_buffers(struct sn9c102_device* cam) +{ + if (cam->nbuffers) { + vfree(cam->frame[0].bufmem); + cam->nbuffers = 0; + } + cam->frame_current = NULL; +} + + +static void sn9c102_empty_framequeues(struct sn9c102_device* cam) +{ + u32 i; + + INIT_LIST_HEAD(&cam->inqueue); + INIT_LIST_HEAD(&cam->outqueue); + + for (i = 0; i < SN9C102_MAX_FRAMES; i++) { + cam->frame[i].state = F_UNUSED; + cam->frame[i].buf.bytesused = 0; + } +} + + +static void sn9c102_requeue_outqueue(struct sn9c102_device* cam) +{ + struct sn9c102_frame_t *i; + + list_for_each_entry(i, &cam->outqueue, frame) { + i->state = F_QUEUED; + list_add(&i->frame, &cam->inqueue); + } + + INIT_LIST_HEAD(&cam->outqueue); +} + + +static void sn9c102_queue_unusedframes(struct sn9c102_device* cam) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].state == F_UNUSED) { + cam->frame[i].state = F_QUEUED; + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[i].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + } +} + +/*****************************************************************************/ + +int sn9c102_write_regs(struct sn9c102_device* cam, u8* buff, u16 index) +{ + struct usb_device* udev = cam->usbdev; + int i, res; + + if (index + sizeof(buff) >= ARRAY_SIZE(cam->reg)) + return -1; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + index, 0, buff, sizeof(buff), + SN9C102_CTRL_TIMEOUT*sizeof(buff)); + if (res < 0) { + DBG(3, "Failed to write registers (index 0x%02X, error %d)", + index, res); + return -1; + } + + for (i = 0; i < sizeof(buff); i++) + cam->reg[index+i] = buff[i]; + + return 0; +} + + +int sn9c102_write_reg(struct sn9c102_device* cam, u8 value, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + if (index >= ARRAY_SIZE(cam->reg)) + return -1; + + *buff = value; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + index, 0, buff, 1, SN9C102_CTRL_TIMEOUT); + if (res < 0) { + DBG(3, "Failed to write a register (value 0x%02X, index " + "0x%02X, error %d)", value, index, res); + return -1; + } + + cam->reg[index] = value; + + return 0; +} + + +/* NOTE: reading some registers always returns 0 */ +static int sn9c102_read_reg(struct sn9c102_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + index, 0, buff, 1, SN9C102_CTRL_TIMEOUT); + if (res < 0) + DBG(3, "Failed to read a register (index 0x%02X, error %d)", + index, res); + + return (res >= 0) ? (int)(*buff) : -1; +} + + +int sn9c102_pread_reg(struct sn9c102_device* cam, u16 index) +{ + if (index >= ARRAY_SIZE(cam->reg)) + return -1; + + return cam->reg[index]; +} + + +static int +sn9c102_i2c_wait(struct sn9c102_device* cam, struct sn9c102_sensor* sensor) +{ + int i, r; + + for (i = 1; i <= 5; i++) { + r = sn9c102_read_reg(cam, 0x08); + if (r < 0) + return -EIO; + if (r & 0x04) + return 0; + if (sensor->frequency & SN9C102_I2C_400KHZ) + udelay(5*16); + else + udelay(16*16); + } + return -EBUSY; +} + + +static int +sn9c102_i2c_detect_read_error(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor) +{ + int r; + r = sn9c102_read_reg(cam, 0x08); + return (r < 0 || (r >= 0 && !(r & 0x08))) ? -EIO : 0; +} + + +static int +sn9c102_i2c_detect_write_error(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor) +{ + int r; + r = sn9c102_read_reg(cam, 0x08); + return (r < 0 || (r >= 0 && (r & 0x08))) ? -EIO : 0; +} + + +int +sn9c102_i2c_try_raw_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 data0, u8 data1, + u8 n, u8 buffer[]) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + /* Write cycle */ + data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) | + ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | 0x10; + data[1] = data0; /* I2C slave id */ + data[2] = data1; /* address */ + data[7] = 0x10; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_wait(cam, sensor); + + /* Read cycle - n bytes */ + data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) | + ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | + (n << 4) | 0x02; + data[1] = data0; + data[7] = 0x10; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_wait(cam, sensor); + + /* The first read byte will be placed in data[4] */ + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0x0a, 0, data, 5, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_detect_read_error(cam, sensor); + + PDBGG("I2C read: address 0x%02X, first read byte: 0x%02X", data1, + data[4]); + + if (err) { + DBG(3, "I2C read failed for %s image sensor", sensor->name); + return -1; + } + + if (buffer) + memcpy(buffer, data, sizeof(buffer)); + + return (int)data[4]; +} + + +int +sn9c102_i2c_try_raw_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 n, u8 data0, + u8 data1, u8 data2, u8 data3, u8 data4, u8 data5) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + /* Write cycle. It usually is address + value */ + data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) | + ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) + | ((n - 1) << 4); + data[1] = data0; + data[2] = data1; + data[3] = data2; + data[4] = data3; + data[5] = data4; + data[6] = data5; + data[7] = 0x14; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_wait(cam, sensor); + err += sn9c102_i2c_detect_write_error(cam, sensor); + + if (err) + DBG(3, "I2C write failed for %s image sensor", sensor->name); + + PDBGG("I2C raw write: %u bytes, data0 = 0x%02X, data1 = 0x%02X, " + "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X", + n, data0, data1, data2, data3, data4, data5); + + return err ? -1 : 0; +} + + +int +sn9c102_i2c_try_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 address) +{ + return sn9c102_i2c_try_raw_read(cam, sensor, sensor->i2c_slave_id, + address, 1, NULL); +} + + +int +sn9c102_i2c_try_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 address, u8 value) +{ + return sn9c102_i2c_try_raw_write(cam, sensor, 3, + sensor->i2c_slave_id, address, + value, 0, 0, 0); +} + + +int sn9c102_i2c_read(struct sn9c102_device* cam, u8 address) +{ + return sn9c102_i2c_try_read(cam, &cam->sensor, address); +} + + +int sn9c102_i2c_write(struct sn9c102_device* cam, u8 address, u8 value) +{ + return sn9c102_i2c_try_write(cam, &cam->sensor, address, value); +} + +/*****************************************************************************/ + +static void* +sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len) +{ + size_t soflen = 0, i; + u8 j, n = 0; + + switch (cam->bridge) { + case BRIDGE_SN9C101: + case BRIDGE_SN9C102: + soflen = sizeof(sn9c102_sof_header_t); + n = sizeof(sn9c102_sof_header) / soflen; + break; + case BRIDGE_SN9C103: + soflen = sizeof(sn9c103_sof_header_t); + n = sizeof(sn9c103_sof_header) / soflen; + } + + for (i = 0; (len >= soflen) && (i <= len - soflen); i++) + for (j = 0; j < n; j++) + /* The invariable part of the header is 6 bytes long */ + if ((cam->bridge != BRIDGE_SN9C103 && + !memcmp(mem + i, sn9c102_sof_header[j], 6)) || + (cam->bridge == BRIDGE_SN9C103 && + !memcmp(mem + i, sn9c103_sof_header[j], 6))) { + memcpy(cam->sof_header, mem + i, soflen); + /* Skip the header */ + return mem + i + soflen; + } + + return NULL; +} + + +static void* +sn9c102_find_eof_header(struct sn9c102_device* cam, void* mem, size_t len) +{ + size_t eoflen = sizeof(sn9c102_eof_header_t), i; + unsigned j, n = sizeof(sn9c102_eof_header) / eoflen; + + if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X) + return NULL; /* EOF header does not exist in compressed data */ + + for (i = 0; (len >= eoflen) && (i <= len - eoflen); i++) + for (j = 0; j < n; j++) + if (!memcmp(mem + i, sn9c102_eof_header[j], eoflen)) + return mem + i; + + return NULL; +} + + +static void sn9c102_urb_complete(struct urb *urb, struct pt_regs* regs) +{ + struct sn9c102_device* cam = urb->context; + struct sn9c102_frame_t** f; + size_t imagesize, soflen; + u8 i; + int err = 0; + + if (urb->status == -ENOENT) + return; + + f = &cam->frame_current; + + if (cam->stream == STREAM_INTERRUPT) { + cam->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + DBG(3, "Stream interrupted"); + wake_up(&cam->wait_stream); + } + + if (cam->state & DEV_DISCONNECTED) + return; + + if (cam->state & DEV_MISCONFIGURED) { + wake_up_interruptible(&cam->wait_frame); + return; + } + + if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) + goto resubmit_urb; + + if (!(*f)) + (*f) = list_entry(cam->inqueue.next, struct sn9c102_frame_t, + frame); + + imagesize = (cam->sensor.pix_format.width * + cam->sensor.pix_format.height * + cam->sensor.pix_format.priv) / 8; + + soflen = (cam->bridge) == BRIDGE_SN9C103 ? + sizeof(sn9c103_sof_header_t) : + sizeof(sn9c102_sof_header_t); + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int img, len, status; + void *pos, *sof, *eof; + + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status) { + DBG(3, "Error in isochronous frame"); + (*f)->state = F_ERROR; + continue; + } + + PDBGG("Isochrnous frame: length %u, #%u i", len, i); + +redo: + sof = sn9c102_find_sof_header(cam, pos, len); + if (likely(!sof)) { + eof = sn9c102_find_eof_header(cam, pos, len); + if ((*f)->state == F_GRABBING) { +end_of_frame: + img = len; + + if (eof) + img = (eof > pos) ? eof - pos - 1 : 0; + + if ((*f)->buf.bytesused+img > imagesize) { + u32 b; + b = (*f)->buf.bytesused + img - + imagesize; + img = imagesize - (*f)->buf.bytesused; + DBG(3, "Expected EOF not found: " + "video frame cut"); + if (eof) + DBG(3, "Exceeded limit: +%u " + "bytes", (unsigned)(b)); + } + + memcpy((*f)->bufmem + (*f)->buf.bytesused, pos, + img); + + if ((*f)->buf.bytesused == 0) + do_gettimeofday(&(*f)->buf.timestamp); + + (*f)->buf.bytesused += img; + + if ((*f)->buf.bytesused == imagesize || + (cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_SN9C10X && eof)) { + u32 b; + b = (*f)->buf.bytesused; + (*f)->state = F_DONE; + (*f)->buf.sequence= ++cam->frame_count; + spin_lock(&cam->queue_lock); + list_move_tail(&(*f)->frame, + &cam->outqueue); + if (!list_empty(&cam->inqueue)) + (*f) = list_entry( + cam->inqueue.next, + struct sn9c102_frame_t, + frame ); + else + (*f) = NULL; + spin_unlock(&cam->queue_lock); + memcpy(cam->sysfs.frame_header, + cam->sof_header, soflen); + DBG(3, "Video frame captured: %lu " + "bytes", (unsigned long)(b)); + + if (!(*f)) + goto resubmit_urb; + + } else if (eof) { + (*f)->state = F_ERROR; + DBG(3, "Not expected EOF after %lu " + "bytes of image data", + (unsigned long) + ((*f)->buf.bytesused)); + } + + if (sof) /* (1) */ + goto start_of_frame; + + } else if (eof) { + DBG(3, "EOF without SOF"); + continue; + + } else { + PDBGG("Ignoring pointless isochronous frame"); + continue; + } + + } else if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) { +start_of_frame: + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + len -= (sof - pos); + pos = sof; + DBG(3, "SOF detected: new video frame"); + if (len) + goto redo; + + } else if ((*f)->state == F_GRABBING) { + eof = sn9c102_find_eof_header(cam, pos, len); + if (eof && eof < sof) + goto end_of_frame; /* (1) */ + else { + if (cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_SN9C10X) { + eof = sof - soflen; + goto end_of_frame; + } else { + DBG(3, "SOF before expected EOF after " + "%lu bytes of image data", + (unsigned long) + ((*f)->buf.bytesused)); + goto start_of_frame; + } + } + } + } + +resubmit_urb: + urb->dev = cam->usbdev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0 && err != -EPERM) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "usb_submit_urb() failed"); + } + + wake_up_interruptible(&cam->wait_frame); +} + + +static int sn9c102_start_transfer(struct sn9c102_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512, + 680, 800, 900, 1023}; + const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512, + 680, 800, 900, 1003}; + const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ? + sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] : + sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING]; + s8 i, j; + int err = 0; + + for (i = 0; i < SN9C102_URBS; i++) { + cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz, + GFP_KERNEL); + if (!cam->transfer_buffer[i]) { + err = -ENOMEM; + DBG(1, "Not enough memory"); + goto free_buffers; + } + } + + for (i = 0; i < SN9C102_URBS; i++) { + urb = usb_alloc_urb(SN9C102_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + err = -ENOMEM; + DBG(1, "usb_alloc_urb() failed"); + goto free_urbs; + } + urb->dev = udev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = SN9C102_ISO_PACKETS; + urb->complete = sn9c102_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = psz * SN9C102_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < SN9C102_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = psz * j; + urb->iso_frame_desc[j].length = psz; + } + } + + /* Enable video */ + if (!(cam->reg[0x01] & 0x04)) { + err = sn9c102_write_reg(cam, cam->reg[0x01] | 0x04, 0x01); + if (err) { + err = -EIO; + DBG(1, "I/O hardware error"); + goto free_urbs; + } + } + + err = usb_set_interface(udev, 0, SN9C102_ALTERNATE_SETTING); + if (err) { + DBG(1, "usb_set_interface() failed"); + goto free_urbs; + } + + cam->frame_current = NULL; + + for (i = 0; i < SN9C102_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + for (j = i-1; j >= 0; j--) + usb_kill_urb(cam->urb[j]); + DBG(1, "usb_submit_urb() failed, error %d", err); + goto free_urbs; + } + } + + return 0; + +free_urbs: + for (i = 0; (i < SN9C102_URBS) && cam->urb[i]; i++) + usb_free_urb(cam->urb[i]); + +free_buffers: + for (i = 0; (i < SN9C102_URBS) && cam->transfer_buffer[i]; i++) + kfree(cam->transfer_buffer[i]); + + return err; +} + + +static int sn9c102_stop_transfer(struct sn9c102_device* cam) +{ + struct usb_device *udev = cam->usbdev; + s8 i; + int err = 0; + + if (cam->state & DEV_DISCONNECTED) + return 0; + + for (i = SN9C102_URBS-1; i >= 0; i--) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + kfree(cam->transfer_buffer[i]); + } + + err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + if (err) + DBG(3, "usb_set_interface() failed"); + + return err; +} + + +static int sn9c102_stream_interrupt(struct sn9c102_device* cam) +{ + long timeout; + + cam->stream = STREAM_INTERRUPT; + timeout = wait_event_timeout(cam->wait_stream, + (cam->stream == STREAM_OFF) || + (cam->state & DEV_DISCONNECTED), + SN9C102_URB_TIMEOUT); + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + else if (cam->stream != STREAM_OFF) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "URB timeout reached. The camera is misconfigured. " + "To use it, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + return 0; +} + +/*****************************************************************************/ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count) +{ + char str[5]; + char* endp; + unsigned long val; + + if (len < 4) { + strncpy(str, buff, len); + str[len+1] = '\0'; + } else { + strncpy(str, buff, 4); + str[4] = '\0'; + } + + val = simple_strtoul(str, &endp, 0); + + *count = 0; + if (val <= 0xff) + *count = (ssize_t)(endp - str); + if ((*count) && (len == *count+1) && (buff[*count] == '\n')) + *count += 1; + + return (u8)val; +} + +/* + NOTE 1: being inside one of the following methods implies that the v4l + device exists for sure (see kobjects and reference counters) + NOTE 2: buffers are PAGE_SIZE long +*/ + +static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.reg); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + index = sn9c102_strtou8(buf, len, &count); + if (index > 0x1f || !count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.reg = index; + + DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t sn9c102_show_val(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + if ((val = sn9c102_read_reg(cam, cam->sysfs.reg)) < 0) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_val(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + value = sn9c102_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + err = sn9c102_write_reg(cam, value, cam->sysfs.reg); + if (err) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X", + cam->sysfs.reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + index = sn9c102_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.i2c_reg = index; + + DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & SN9C102_I2C_READ)) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENOSYS; + } + + if ((val = sn9c102_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & SN9C102_I2C_WRITE)) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENOSYS; + } + + value = sn9c102_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + err = sn9c102_i2c_write(cam, cam->sysfs.i2c_reg, value); + if (err) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X", + cam->sysfs.i2c_reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_green(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + enum sn9c102_bridge bridge; + ssize_t res = 0; + u8 value; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + bridge = cam->bridge; + + mutex_unlock(&sn9c102_sysfs_lock); + + value = sn9c102_strtou8(buf, len, &count); + if (!count) + return -EINVAL; + + switch (bridge) { + case BRIDGE_SN9C101: + case BRIDGE_SN9C102: + if (value > 0x0f) + return -EINVAL; + if ((res = sn9c102_store_reg(cd, "0x11", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + break; + case BRIDGE_SN9C103: + if (value > 0x7f) + return -EINVAL; + if ((res = sn9c102_store_reg(cd, "0x04", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + break; + } + + return res; +} + + +static ssize_t +sn9c102_store_blue(struct class_device* cd, const char* buf, size_t len) +{ + ssize_t res = 0; + u8 value; + ssize_t count; + + value = sn9c102_strtou8(buf, len, &count); + if (!count || value > 0x7f) + return -EINVAL; + + if ((res = sn9c102_store_reg(cd, "0x06", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + + return res; +} + + +static ssize_t +sn9c102_store_red(struct class_device* cd, const char* buf, size_t len) +{ + ssize_t res = 0; + u8 value; + ssize_t count; + + value = sn9c102_strtou8(buf, len, &count); + if (!count || value > 0x7f) + return -EINVAL; + + if ((res = sn9c102_store_reg(cd, "0x05", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + + return res; +} + + +static ssize_t sn9c102_show_frame_header(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) + return -ENODEV; + + count = sizeof(cam->sysfs.frame_header); + memcpy(buf, cam->sysfs.frame_header, count); + + DBG(3, "Frame header, read bytes: %zd", count); + + return count; +} + + +static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR, + sn9c102_show_reg, sn9c102_store_reg); +static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR, + sn9c102_show_val, sn9c102_store_val); +static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR, + sn9c102_show_i2c_reg, sn9c102_store_i2c_reg); +static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR, + sn9c102_show_i2c_val, sn9c102_store_i2c_val); +static CLASS_DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green); +static CLASS_DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue); +static CLASS_DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red); +static CLASS_DEVICE_ATTR(frame_header, S_IRUGO, + sn9c102_show_frame_header, NULL); + + +static void sn9c102_create_sysfs(struct sn9c102_device* cam) +{ + struct video_device *v4ldev = cam->v4ldev; + + video_device_create_file(v4ldev, &class_device_attr_reg); + video_device_create_file(v4ldev, &class_device_attr_val); + video_device_create_file(v4ldev, &class_device_attr_frame_header); + if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) + video_device_create_file(v4ldev, &class_device_attr_green); + else if (cam->bridge == BRIDGE_SN9C103) { + video_device_create_file(v4ldev, &class_device_attr_blue); + video_device_create_file(v4ldev, &class_device_attr_red); + } + if (cam->sensor.sysfs_ops) { + video_device_create_file(v4ldev, &class_device_attr_i2c_reg); + video_device_create_file(v4ldev, &class_device_attr_i2c_val); + } +} +#endif /* CONFIG_VIDEO_ADV_DEBUG */ + +/*****************************************************************************/ + +static int +sn9c102_set_pix_format(struct sn9c102_device* cam, struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x80, 0x18); + else + err += sn9c102_write_reg(cam, cam->reg[0x18] & 0x7f, 0x18); + + return err ? -EIO : 0; +} + + +static int +sn9c102_set_compression(struct sn9c102_device* cam, + struct v4l2_jpegcompression* compression) +{ + int err = 0; + + if (compression->quality == 0) + err += sn9c102_write_reg(cam, cam->reg[0x17] | 0x01, 0x17); + else if (compression->quality == 1) + err += sn9c102_write_reg(cam, cam->reg[0x17] & 0xfe, 0x17); + + return err ? -EIO : 0; +} + + +static int sn9c102_set_scale(struct sn9c102_device* cam, u8 scale) +{ + u8 r = 0; + int err = 0; + + if (scale == 1) + r = cam->reg[0x18] & 0xcf; + else if (scale == 2) { + r = cam->reg[0x18] & 0xcf; + r |= 0x10; + } else if (scale == 4) + r = cam->reg[0x18] | 0x20; + + err += sn9c102_write_reg(cam, r, 0x18); + if (err) + return -EIO; + + PDBGG("Scaling factor: %u", scale); + + return 0; +} + + +static int sn9c102_set_crop(struct sn9c102_device* cam, struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &cam->sensor; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left), + v_start = (u8)(rect->top - s->cropcap.bounds.top), + h_size = (u8)(rect->width / 16), + v_size = (u8)(rect->height / 16); + int err = 0; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + err += sn9c102_write_reg(cam, h_size, 0x15); + err += sn9c102_write_reg(cam, v_size, 0x16); + if (err) + return -EIO; + + PDBGG("h_start, v_start, h_size, v_size, ho_size, vo_size " + "%u %u %u %u", h_start, v_start, h_size, v_size); + + return 0; +} + + +static int sn9c102_init(struct sn9c102_device* cam) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + struct v4l2_queryctrl *qctrl; + struct v4l2_rect* rect; + u8 i = 0; + int err = 0; + + if (!(cam->state & DEV_INITIALIZED)) { + init_waitqueue_head(&cam->open); + qctrl = s->qctrl; + rect = &(s->cropcap.defrect); + } else { /* use current values */ + qctrl = s->_qctrl; + rect = &(s->_rect); + } + + err += sn9c102_set_scale(cam, rect->width / s->pix_format.width); + err += sn9c102_set_crop(cam, rect); + if (err) + return err; + + if (s->init) { + err = s->init(cam); + if (err) { + DBG(3, "Sensor initialization failed"); + return err; + } + } + + if (!(cam->state & DEV_INITIALIZED)) + cam->compression.quality = cam->reg[0x17] & 0x01 ? 0 : 1; + else + err += sn9c102_set_compression(cam, &cam->compression); + err += sn9c102_set_pix_format(cam, &s->pix_format); + if (s->set_pix_format) + err += s->set_pix_format(cam, &s->pix_format); + if (err) + return err; + + if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X) + DBG(3, "Compressed video format is active, quality %d", + cam->compression.quality); + else + DBG(3, "Uncompressed video format is active"); + + if (s->set_crop) + if ((err = s->set_crop(cam, rect))) { + DBG(3, "set_crop() failed"); + return err; + } + + if (s->set_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && + !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { + ctrl.id = s->qctrl[i].id; + ctrl.value = qctrl[i].default_value; + err = s->set_ctrl(cam, &ctrl); + if (err) { + DBG(3, "Set %s control failed", + s->qctrl[i].name); + return err; + } + DBG(3, "Image sensor supports '%s' control", + s->qctrl[i].name); + } + } + + if (!(cam->state & DEV_INITIALIZED)) { + mutex_init(&cam->fileop_mutex); + spin_lock_init(&cam->queue_lock); + init_waitqueue_head(&cam->wait_frame); + init_waitqueue_head(&cam->wait_stream); + cam->nreadbuffers = 2; + memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); + memcpy(&(s->_rect), &(s->cropcap.defrect), + sizeof(struct v4l2_rect)); + cam->state |= DEV_INITIALIZED; + } + + DBG(2, "Initialization succeeded"); + return 0; +} + + +static void sn9c102_release_resources(struct sn9c102_device* cam) +{ + mutex_lock(&sn9c102_sysfs_lock); + + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + video_set_drvdata(cam->v4ldev, NULL); + video_unregister_device(cam->v4ldev); + + usb_put_dev(cam->usbdev); + + mutex_unlock(&sn9c102_sysfs_lock); + + kfree(cam->control_buffer); +} + +/*****************************************************************************/ + +static int sn9c102_open(struct inode* inode, struct file* filp) +{ + struct sn9c102_device* cam; + int err = 0; + + /* + This is the only safe way to prevent race conditions with + disconnect + */ + if (!down_read_trylock(&sn9c102_disconnect)) + return -ERESTARTSYS; + + cam = video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->dev_mutex)) { + up_read(&sn9c102_disconnect); + return -ERESTARTSYS; + } + + if (cam->users) { + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + if ((filp->f_flags & O_NONBLOCK) || + (filp->f_flags & O_NDELAY)) { + err = -EWOULDBLOCK; + goto out; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->state & DEV_DISCONNECTED + || !cam->users); + if (err) { + up_read(&sn9c102_disconnect); + return err; + } + if (cam->state & DEV_DISCONNECTED) { + up_read(&sn9c102_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + + if (cam->state & DEV_MISCONFIGURED) { + err = sn9c102_init(cam); + if (err) { + DBG(1, "Initialization failed again. " + "I will retry on next open()."); + goto out; + } + cam->state &= ~DEV_MISCONFIGURED; + } + + if ((err = sn9c102_start_transfer(cam))) + goto out; + + filp->private_data = cam; + cam->users++; + cam->io = IO_NONE; + cam->stream = STREAM_OFF; + cam->nbuffers = 0; + cam->frame_count = 0; + sn9c102_empty_framequeues(cam); + + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + +out: + mutex_unlock(&cam->dev_mutex); + up_read(&sn9c102_disconnect); + return err; +} + + +static int sn9c102_release(struct inode* inode, struct file* filp) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + sn9c102_stop_transfer(cam); + + sn9c102_release_buffers(cam); + + if (cam->state & DEV_DISCONNECTED) { + sn9c102_release_resources(cam); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + wake_up_interruptible_nr(&cam->open, 1); + + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + + mutex_unlock(&cam->dev_mutex); + + return 0; +} + + +static ssize_t +sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_frame_t* f, * i; + unsigned long lock_flags; + long timeout; + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io == IO_MMAP) { + DBG(3, "Close and open the device again to choose " + "the read method"); + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + if (cam->io == IO_NONE) { + if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) { + DBG(1, "read() failed, not enough memory"); + mutex_unlock(&cam->fileop_mutex); + return -ENOMEM; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (list_empty(&cam->inqueue)) { + if (!list_empty(&cam->outqueue)) + sn9c102_empty_framequeues(cam); + sn9c102_queue_unusedframes(cam); + } + + if (!count) { + mutex_unlock(&cam->fileop_mutex); + return 0; + } + + if (list_empty(&cam->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) { + mutex_unlock(&cam->fileop_mutex); + return timeout; + } + if (cam->state & DEV_DISCONNECTED) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + if (!timeout || (cam->state & DEV_MISCONFIGURED)) { + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + } + + f = list_entry(cam->outqueue.prev, struct sn9c102_frame_t, frame); + + if (count > f->buf.bytesused) + count = f->buf.bytesused; + + if (copy_to_user(buf, f->bufmem, count)) { + err = -EFAULT; + goto exit; + } + *f_pos += count; + +exit: + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(i, &cam->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + sn9c102_queue_unusedframes(cam); + + PDBGG("Frame #%lu, bytes read: %zu", + (unsigned long)f->buf.index, count); + + mutex_unlock(&cam->fileop_mutex); + + return count; +} + + +static unsigned int sn9c102_poll(struct file *filp, poll_table *wait) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_frame_t* f; + unsigned long lock_flags; + unsigned int mask = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return POLLERR; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + goto error; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + goto error; + } + + if (cam->io == IO_NONE) { + if (!sn9c102_request_buffers(cam, cam->nreadbuffers, + IO_READ)) { + DBG(1, "poll() failed, not enough memory"); + goto error; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (cam->io == IO_READ) { + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(f, &cam->outqueue, frame) + f->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + sn9c102_queue_unusedframes(cam); + } + + poll_wait(filp, &cam->wait_frame, wait); + + if (!list_empty(&cam->outqueue)) + mask |= POLLIN | POLLRDNORM; + + mutex_unlock(&cam->fileop_mutex); + + return mask; + +error: + mutex_unlock(&cam->fileop_mutex); + return POLLERR; +} + + +static void sn9c102_vm_open(struct vm_area_struct* vma) +{ + struct sn9c102_frame_t* f = vma->vm_private_data; + f->vma_use_count++; +} + + +static void sn9c102_vm_close(struct vm_area_struct* vma) +{ + /* NOTE: buffers are not freed here */ + struct sn9c102_frame_t* f = vma->vm_private_data; + f->vma_use_count--; +} + + +static struct vm_operations_struct sn9c102_vm_ops = { + .open = sn9c102_vm_open, + .close = sn9c102_vm_close, +}; + + +static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(cam->frame[0].buf.length)) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) { + if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == cam->nbuffers) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; + + pos = cam->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &sn9c102_vm_ops; + vma->vm_private_data = &cam->frame[i]; + + sn9c102_vm_open(vma); + + mutex_unlock(&cam->fileop_mutex); + + return 0; +} + +/*****************************************************************************/ + +static int +sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_capability cap = { + .driver = "sn9c102", + .version = SN9C102_MODULE_VERSION_CODE, + .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, + }; + + strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); + if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) + strlcpy(cap.bus_info, cam->usbdev->dev.bus_id, + sizeof(cap.bus_info)); + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_input i; + + if (copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; + + if (i.index) + return -EINVAL; + + memset(&i, 0, sizeof(i)); + strcpy(i.name, "Camera"); + i.type = V4L2_INPUT_TYPE_CAMERA; + + if (copy_to_user(arg, &i, sizeof(i))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_g_input(struct sn9c102_device* cam, void __user * arg) +{ + int index = 0; + + if (copy_to_user(arg, &index, sizeof(index))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_input(struct sn9c102_device* cam, void __user * arg) +{ + int index; + + if (copy_from_user(&index, arg, sizeof(index))) + return -EFAULT; + + if (index != 0) + return -EINVAL; + + return 0; +} + + +static int +sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_queryctrl qc; + u8 i; + + if (copy_from_user(&qc, arg, sizeof(qc))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (qc.id && qc.id == s->qctrl[i].id) { + memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); + if (copy_to_user(arg, &qc, sizeof(qc))) + return -EFAULT; + return 0; + } + + return -EINVAL; +} + + +static int +sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + int err = 0; + u8 i; + + if (!s->get_ctrl && !s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + if (!s->get_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id && ctrl.id == s->qctrl[i].id) { + ctrl.value = s->_qctrl[i].default_value; + goto exit; + } + return -EINVAL; + } else + err = s->get_ctrl(cam, &ctrl); + +exit: + if (copy_to_user(arg, &ctrl, sizeof(ctrl))) + return -EFAULT; + + return err; +} + + +static int +sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + u8 i; + int err = 0; + + if (!s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) + return -EINVAL; + if (ctrl.value < s->qctrl[i].minimum || + ctrl.value > s->qctrl[i].maximum) + return -ERANGE; + ctrl.value -= ctrl.value % s->qctrl[i].step; + break; + } + + if ((err = s->set_ctrl(cam, &ctrl))) + return err; + + s->_qctrl[i].default_value = ctrl.value; + + PDBGG("VIDIOC_S_CTRL: id %lu, value %lu", + (unsigned long)ctrl.id, (unsigned long)ctrl.value); + + return 0; +} + + +static int +sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_cropcap* cc = &(cam->sensor.cropcap); + + cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cc->pixelaspect.numerator = 1; + cc->pixelaspect.denominator = 1; + + if (copy_to_user(arg, cc, sizeof(*cc))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_crop crop = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + }; + + memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); + + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_crop crop; + struct v4l2_rect* rect; + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_pix_format* pix_format = &(s->pix_format); + u8 scale; + const enum sn9c102_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&crop, arg, sizeof(crop))) + return -EFAULT; + + rect = &(crop.c); + + if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_CROP failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + /* Preserve R,G or B origin */ + rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L; + rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L; + + if (rect->width < 16) + rect->width = 16; + if (rect->height < 16) + rect->height = 16; + if (rect->width > bounds->width) + rect->width = bounds->width; + if (rect->height > bounds->height) + rect->height = bounds->height; + if (rect->left < bounds->left) + rect->left = bounds->left; + if (rect->top < bounds->top) + rect->top = bounds->top; + if (rect->left + rect->width > bounds->left + bounds->width) + rect->left = bounds->left+bounds->width - rect->width; + if (rect->top + rect->height > bounds->top + bounds->height) + rect->top = bounds->top+bounds->height - rect->height; + + rect->width &= ~15L; + rect->height &= ~15L; + + if (SN9C102_PRESERVE_IMGSCALE) { + /* Calculate the actual scaling factor */ + u32 a, b; + a = rect->width * rect->height; + b = pix_format->width * pix_format->height; + scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1; + } else + scale = 1; + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &crop, sizeof(crop))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + sn9c102_release_buffers(cam); + + err = sn9c102_set_crop(cam, rect); + if (s->set_crop) + err += s->set_crop(cam, rect); + err += sn9c102_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + s->pix_format.width = rect->width/scale; + s->pix_format.height = rect->height/scale; + memcpy(&(s->_rect), rect, sizeof(*rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + sn9c102_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + sn9c102_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_fmtdesc fmtd; + + if (copy_from_user(&fmtd, arg, sizeof(fmtd))) + return -EFAULT; + + if (fmtd.index == 0) { + strcpy(fmtd.description, "bayer rgb"); + fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8; + } else if (fmtd.index == 1) { + strcpy(fmtd.description, "compressed"); + fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X; + fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; + } else + return -EINVAL; + + fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); + + if (copy_to_user(arg, &fmtd, sizeof(fmtd))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_format format; + struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X) + ? 0 : (pfmt->width * pfmt->priv) / 8; + pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); + pfmt->field = V4L2_FIELD_NONE; + memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); + + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd, + void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_format format; + struct v4l2_pix_format* pix; + struct v4l2_pix_format* pfmt = &(s->pix_format); + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_rect rect; + u8 scale; + const enum sn9c102_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + pix = &(format.fmt.pix); + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memcpy(&rect, &(s->_rect), sizeof(rect)); + + { /* calculate the actual scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1; + } + + rect.width = scale * pix->width; + rect.height = scale * pix->height; + + if (rect.width < 16) + rect.width = 16; + if (rect.height < 16) + rect.height = 16; + if (rect.width > bounds->left + bounds->width - rect.left) + rect.width = bounds->left + bounds->width - rect.left; + if (rect.height > bounds->top + bounds->height - rect.top) + rect.height = bounds->top + bounds->height - rect.top; + + rect.width &= ~15L; + rect.height &= ~15L; + + { /* adjust the scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1; + } + + pix->width = rect.width / scale; + pix->height = rect.height / scale; + + if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X && + pix->pixelformat != V4L2_PIX_FMT_SBGGR8) + pix->pixelformat = pfmt->pixelformat; + pix->priv = pfmt->priv; /* bpp */ + pix->colorspace = pfmt->colorspace; + pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + ? 0 : (pix->width * pix->priv) / 8; + pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); + pix->field = V4L2_FIELD_NONE; + + if (cmd == VIDIOC_TRY_FMT) { + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + return 0; + } + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_FMT failed. Unmap the " + "buffers first."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &format, sizeof(format))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + sn9c102_release_buffers(cam); + + err += sn9c102_set_pix_format(cam, pix); + err += sn9c102_set_crop(cam, &rect); + if (s->set_pix_format) + err += s->set_pix_format(cam, pix); + if (s->set_crop) + err += s->set_crop(cam, &rect); + err += sn9c102_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + memcpy(pfmt, pix, sizeof(*pix)); + memcpy(&(s->_rect), &rect, sizeof(rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + sn9c102_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + sn9c102_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg) +{ + if (copy_to_user(arg, &cam->compression, + sizeof(cam->compression))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_jpegcompression jc; + const enum sn9c102_stream_state stream = cam->stream; + int err = 0; + + if (copy_from_user(&jc, arg, sizeof(jc))) + return -EFAULT; + + if (jc.quality != 0 && jc.quality != 1) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + err += sn9c102_set_compression(cam, &jc); + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " + "problems. To use the camera, close and open " + "/dev/video%d again.", cam->v4ldev->minor); + return -EIO; + } + + cam->compression.quality = jc.quality; + + cam->stream = stream; + + return 0; +} + + +static int +sn9c102_vidioc_reqbufs(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_requestbuffers rb; + u32 i; + int err; + + if (copy_from_user(&rb, arg, sizeof(rb))) + return -EFAULT; + + if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb.memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (cam->io == IO_READ) { + DBG(3, "Close and open the device again to choose the mmap " + "I/O method"); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_REQBUFS failed. Previous buffers are " + "still mapped."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + sn9c102_empty_framequeues(cam); + + sn9c102_release_buffers(cam); + if (rb.count) + rb.count = sn9c102_request_buffers(cam, rb.count, IO_MMAP); + + if (copy_to_user(arg, &rb, sizeof(rb))) { + sn9c102_release_buffers(cam); + cam->io = IO_NONE; + return -EFAULT; + } + + cam->io = rb.count ? IO_MMAP : IO_NONE; + + return 0; +} + + +static int +sn9c102_vidioc_querybuf(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); + + if (cam->frame[b.index].vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (cam->frame[b.index].state == F_DONE) + b.flags |= V4L2_BUF_FLAG_DONE; + else if (cam->frame[b.index].state != F_UNUSED) + b.flags |= V4L2_BUF_FLAG_QUEUED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_qbuf(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + unsigned long lock_flags; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->frame[b.index].state != F_UNUSED) + return -EINVAL; + + cam->frame[b.index].state = F_QUEUED; + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + PDBGG("Frame #%lu queued", (unsigned long)b.index); + + return 0; +} + + +static int +sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp, + void __user * arg) +{ + struct v4l2_buffer b; + struct sn9c102_frame_t *f; + unsigned long lock_flags; + long timeout; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->outqueue)) { + if (cam->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) + return timeout; + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + if (!timeout || (cam->state & DEV_MISCONFIGURED)) + return -EIO; + } + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + f = list_entry(cam->outqueue.next, struct sn9c102_frame_t, frame); + list_del(cam->outqueue.next); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + f->state = F_UNUSED; + + memcpy(&b, &f->buf, sizeof(b)); + if (f->vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); + + return 0; +} + + +static int +sn9c102_vidioc_streamon(struct sn9c102_device* cam, void __user * arg) +{ + int type; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->inqueue)) + return -EINVAL; + + cam->stream = STREAM_ON; + + DBG(3, "Stream on"); + + return 0; +} + + +static int +sn9c102_vidioc_streamoff(struct sn9c102_device* cam, void __user * arg) +{ + int type, err; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + sn9c102_empty_framequeues(cam); + + DBG(3, "Stream off"); + + return 0; +} + + +static int +sn9c102_vidioc_g_parm(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + + if (sp.parm.capture.readbuffers == 0) + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES) + sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + cam->nreadbuffers = sp.parm.capture.readbuffers; + + return 0; +} + + +static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOC_QUERYCAP: + return sn9c102_vidioc_querycap(cam, arg); + + case VIDIOC_ENUMINPUT: + return sn9c102_vidioc_enuminput(cam, arg); + + case VIDIOC_G_INPUT: + return sn9c102_vidioc_g_input(cam, arg); + + case VIDIOC_S_INPUT: + return sn9c102_vidioc_s_input(cam, arg); + + case VIDIOC_QUERYCTRL: + return sn9c102_vidioc_query_ctrl(cam, arg); + + case VIDIOC_G_CTRL: + return sn9c102_vidioc_g_ctrl(cam, arg); + + case VIDIOC_S_CTRL_OLD: + case VIDIOC_S_CTRL: + return sn9c102_vidioc_s_ctrl(cam, arg); + + case VIDIOC_CROPCAP_OLD: + case VIDIOC_CROPCAP: + return sn9c102_vidioc_cropcap(cam, arg); + + case VIDIOC_G_CROP: + return sn9c102_vidioc_g_crop(cam, arg); + + case VIDIOC_S_CROP: + return sn9c102_vidioc_s_crop(cam, arg); + + case VIDIOC_ENUM_FMT: + return sn9c102_vidioc_enum_fmt(cam, arg); + + case VIDIOC_G_FMT: + return sn9c102_vidioc_g_fmt(cam, arg); + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + return sn9c102_vidioc_try_s_fmt(cam, cmd, arg); + + case VIDIOC_G_JPEGCOMP: + return sn9c102_vidioc_g_jpegcomp(cam, arg); + + case VIDIOC_S_JPEGCOMP: + return sn9c102_vidioc_s_jpegcomp(cam, arg); + + case VIDIOC_REQBUFS: + return sn9c102_vidioc_reqbufs(cam, arg); + + case VIDIOC_QUERYBUF: + return sn9c102_vidioc_querybuf(cam, arg); + + case VIDIOC_QBUF: + return sn9c102_vidioc_qbuf(cam, arg); + + case VIDIOC_DQBUF: + return sn9c102_vidioc_dqbuf(cam, filp, arg); + + case VIDIOC_STREAMON: + return sn9c102_vidioc_streamon(cam, arg); + + case VIDIOC_STREAMOFF: + return sn9c102_vidioc_streamoff(cam, arg); + + case VIDIOC_G_PARM: + return sn9c102_vidioc_g_parm(cam, arg); + + case VIDIOC_S_PARM_OLD: + case VIDIOC_S_PARM: + return sn9c102_vidioc_s_parm(cam, arg); + + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYMENU: + return -EINVAL; + + default: + return -EINVAL; + + } +} + + +static int sn9c102_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + V4LDBG(3, "sn9c102", cmd); + + err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + + return err; +} + +/*****************************************************************************/ + +static struct file_operations sn9c102_fops = { + .owner = THIS_MODULE, + .open = sn9c102_open, + .release = sn9c102_release, + .ioctl = sn9c102_ioctl, + .read = sn9c102_read, + .poll = sn9c102_poll, + .mmap = sn9c102_mmap, + .llseek = no_llseek, +}; + +/*****************************************************************************/ + +/* It exists a single interface only. We do not need to validate anything. */ +static int +sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct sn9c102_device* cam; + static unsigned int dev_nr = 0; + unsigned int i; + int err = 0, r; + + if (!(cam = kzalloc(sizeof(struct sn9c102_device), GFP_KERNEL))) + return -ENOMEM; + + cam->usbdev = udev; + + if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) { + DBG(1, "kmalloc() failed"); + err = -ENOMEM; + goto fail; + } + + if (!(cam->v4ldev = video_device_alloc())) { + DBG(1, "video_device_alloc() failed"); + err = -ENOMEM; + goto fail; + } + + mutex_init(&cam->dev_mutex); + + r = sn9c102_read_reg(cam, 0x00); + if (r < 0 || r != 0x10) { + DBG(1, "Sorry, this is not a SN9C10x based camera " + "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct); + err = -ENODEV; + goto fail; + } + + cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ? + BRIDGE_SN9C103 : BRIDGE_SN9C102; + switch (cam->bridge) { + case BRIDGE_SN9C101: + case BRIDGE_SN9C102: + DBG(2, "SN9C10[12] PC Camera Controller detected " + "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct); + break; + case BRIDGE_SN9C103: + DBG(2, "SN9C103 PC Camera Controller detected " + "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct); + break; + } + + for (i = 0; sn9c102_sensor_table[i]; i++) { + err = sn9c102_sensor_table[i](cam); + if (!err) + break; + } + + if (!err) { + DBG(2, "%s image sensor detected", cam->sensor.name); + DBG(3, "Support for %s maintained by %s", + cam->sensor.name, cam->sensor.maintainer); + } else { + DBG(1, "No supported image sensor detected"); + err = -ENODEV; + goto fail; + } + + if (sn9c102_init(cam)) { + DBG(1, "Initialization failed. I will retry on open()."); + cam->state |= DEV_MISCONFIGURED; + } + + strcpy(cam->v4ldev->name, "SN9C10x PC Camera"); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = 0; + cam->v4ldev->fops = &sn9c102_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + + mutex_lock(&cam->dev_mutex); + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L2 device registration failed"); + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(1, "Free /dev/videoX node not found"); + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0; + mutex_unlock(&cam->dev_mutex); + goto fail; + } + + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + + cam->module_param.force_munmap = force_munmap[dev_nr]; + cam->module_param.frame_timeout = frame_timeout[dev_nr]; + + dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + sn9c102_create_sysfs(cam); + DBG(2, "Optional device control through 'sysfs' interface ready"); +#endif + + usb_set_intfdata(intf, cam); + + mutex_unlock(&cam->dev_mutex); + + return 0; + +fail: + if (cam) { + kfree(cam->control_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + kfree(cam); + } + return err; +} + + +static void sn9c102_usb_disconnect(struct usb_interface* intf) +{ + struct sn9c102_device* cam = usb_get_intfdata(intf); + + if (!cam) + return; + + down_write(&sn9c102_disconnect); + + mutex_lock(&cam->dev_mutex); + + DBG(2, "Disconnecting %s...", cam->v4ldev->name); + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "Device /dev/video%d is open! Deregistration and " + "memory deallocation are deferred on close.", + cam->v4ldev->minor); + cam->state |= DEV_MISCONFIGURED; + sn9c102_stop_transfer(cam); + cam->state |= DEV_DISCONNECTED; + wake_up_interruptible(&cam->wait_frame); + wake_up(&cam->wait_stream); + usb_get_dev(cam->usbdev); + } else { + cam->state |= DEV_DISCONNECTED; + sn9c102_release_resources(cam); + } + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + + up_write(&sn9c102_disconnect); +} + + +static struct usb_driver sn9c102_usb_driver = { + .name = "sn9c102", + .id_table = sn9c102_id_table, + .probe = sn9c102_usb_probe, + .disconnect = sn9c102_usb_disconnect, +}; + +/*****************************************************************************/ + +static int __init sn9c102_module_init(void) +{ + int err = 0; + + KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION); + KDBG(3, SN9C102_MODULE_AUTHOR); + + if ((err = usb_register(&sn9c102_usb_driver))) + KDBG(1, "usb_register() failed"); + + return err; +} + + +static void __exit sn9c102_module_exit(void) +{ + usb_deregister(&sn9c102_usb_driver); +} + + +module_init(sn9c102_module_init); +module_exit(sn9c102_module_exit); diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c new file mode 100644 index 00000000000..46c12ec3ca6 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c @@ -0,0 +1,271 @@ +/*************************************************************************** + * Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor hv7131d; + + +static int hv7131d_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x0e, 0x18); + err += sn9c102_write_reg(cam, 0xf2, 0x19); + + err += sn9c102_i2c_write(cam, 0x01, 0x04); + err += sn9c102_i2c_write(cam, 0x02, 0x00); + err += sn9c102_i2c_write(cam, 0x28, 0x00); + + return err; +} + + +static int hv7131d_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = sn9c102_i2c_read(cam, 0x26), + r2 = sn9c102_i2c_read(cam, 0x27); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 8) | (r2 & 0xff); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x31)) < 0) + return -EIO; + ctrl->value = 0x3f - (ctrl->value & 0x3f); + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x33)) < 0) + return -EIO; + ctrl->value = 0x3f - (ctrl->value & 0x3f); + return 0; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x32)) < 0) + return -EIO; + ctrl->value = 0x3f - (ctrl->value & 0x3f); + return 0; + case SN9C102_V4L2_CID_RESET_LEVEL: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x30)) < 0) + return -EIO; + ctrl->value &= 0x3f; + return 0; + case SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x34)) < 0) + return -EIO; + ctrl->value &= 0x07; + return 0; + default: + return -EINVAL; + } +} + + +static int hv7131d_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x26, ctrl->value >> 8); + err += sn9c102_i2c_write(cam, 0x27, ctrl->value & 0xff); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x31, 0x3f - ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x33, 0x3f - ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x32, 0x3f - ctrl->value); + break; + case SN9C102_V4L2_CID_RESET_LEVEL: + err += sn9c102_i2c_write(cam, 0x30, ctrl->value); + break; + case SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE: + err += sn9c102_i2c_write(cam, 0x34, ctrl->value); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int hv7131d_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &hv7131d; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 2, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int hv7131d_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x42, 0x19); + else + err += sn9c102_write_reg(cam, 0xf2, 0x19); + + return err; +} + + +static struct sn9c102_sensor hv7131d = { + .name = "HV7131D", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x11, + .init = &hv7131d_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x0250, + .maximum = 0xffff, + .step = 0x0001, + .default_value = 0x0250, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x1e, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_RESET_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "reset level", + .minimum = 0x19, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x30, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "pixel bias voltage", + .minimum = 0x00, + .maximum = 0x07, + .step = 0x01, + .default_value = 0x02, + .flags = 0, + }, + }, + .get_ctrl = &hv7131d_get_ctrl, + .set_ctrl = &hv7131d_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &hv7131d_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &hv7131d_set_pix_format +}; + + +int sn9c102_probe_hv7131d(struct sn9c102_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + r0 = sn9c102_i2c_try_read(cam, &hv7131d, 0x00); + r1 = sn9c102_i2c_try_read(cam, &hv7131d, 0x01); + if (r0 < 0 || r1 < 0) + return -EIO; + + if (r0 != 0x00 && r1 != 0x04) + return -ENODEV; + + sn9c102_attach_sensor(cam, &hv7131d); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c new file mode 100644 index 00000000000..d9aa7a61095 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c @@ -0,0 +1,363 @@ +/*************************************************************************** + * Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor mi0343; +static u8 mi0343_i2c_data[5+1]; + + +static int mi0343_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x0a, 0x14); + err += sn9c102_write_reg(cam, 0x40, 0x01); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x07, 0x18); + err += sn9c102_write_reg(cam, 0xa0, 0x19); + + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x0d, 0x00, 0x01, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x0d, 0x00, 0x00, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x03, 0x01, 0xe1, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x04, 0x02, 0x81, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x05, 0x00, 0x17, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x06, 0x00, 0x11, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x62, 0x04, 0x9a, 0, 0); + + return err; +} + + +static int mi0343_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x09, 2+1, mi0343_i2c_data) < 0) + return -EIO; + ctrl->value = mi0343_i2c_data[2]; + return 0; + case V4L2_CID_GAIN: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x35, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + case V4L2_CID_HFLIP: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x20, 2+1, mi0343_i2c_data) < 0) + return -EIO; + ctrl->value = mi0343_i2c_data[3] & 0x20 ? 1 : 0; + return 0; + case V4L2_CID_VFLIP: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x20, 2+1, mi0343_i2c_data) < 0) + return -EIO; + ctrl->value = mi0343_i2c_data[3] & 0x80 ? 1 : 0; + return 0; + case V4L2_CID_RED_BALANCE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x2d, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + case V4L2_CID_BLUE_BALANCE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x2c, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x2e, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + default: + return -EINVAL; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + case V4L2_CID_RED_BALANCE: + case V4L2_CID_BLUE_BALANCE: + case SN9C102_V4L2_CID_GREEN_BALANCE: + ctrl->value = mi0343_i2c_data[3] | (mi0343_i2c_data[2] << 8); + if (ctrl->value >= 0x10 && ctrl->value <= 0x3f) + ctrl->value -= 0x10; + else if (ctrl->value >= 0x60 && ctrl->value <= 0x7f) + ctrl->value -= 0x60; + else if (ctrl->value >= 0xe0 && ctrl->value <= 0xff) + ctrl->value -= 0xe0; + } + + return 0; +} + + +static int mi0343_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + u16 reg = 0; + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + case V4L2_CID_RED_BALANCE: + case V4L2_CID_BLUE_BALANCE: + case SN9C102_V4L2_CID_GREEN_BALANCE: + if (ctrl->value <= (0x3f-0x10)) + reg = 0x10 + ctrl->value; + else if (ctrl->value <= ((0x3f-0x10) + (0x7f-0x60))) + reg = 0x60 + (ctrl->value - (0x3f-0x10)); + else + reg = 0xe0 + (ctrl->value - (0x3f-0x10) - (0x7f-0x60)); + break; + } + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x09, ctrl->value, 0x00, + 0, 0); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x35, reg >> 8, reg & 0xff, + 0, 0); + break; + case V4L2_CID_HFLIP: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x20, ctrl->value ? 0x40:0x00, + ctrl->value ? 0x20:0x00, + 0, 0); + break; + case V4L2_CID_VFLIP: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x20, ctrl->value ? 0x80:0x00, + ctrl->value ? 0x80:0x00, + 0, 0); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2d, reg >> 8, reg & 0xff, + 0, 0); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2c, reg >> 8, reg & 0xff, + 0, 0); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2b, reg >> 8, reg & 0xff, + 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2e, reg >> 8, reg & 0xff, + 0, 0); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int mi0343_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &mi0343; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 0, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int mi0343_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) { + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x0a, 0x00, 0x03, 0, 0); + err += sn9c102_write_reg(cam, 0x20, 0x19); + } else { + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x0a, 0x00, 0x05, 0, 0); + err += sn9c102_write_reg(cam, 0xa0, 0x19); + } + + return err; +} + + +static struct sn9c102_sensor mi0343 = { + .name = "MI-0343", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x5d, + .init = &mi0343_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x06, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0),/*0x6d*/ + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0), + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0), + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = ((0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0)), + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .get_ctrl = &mi0343_get_ctrl, + .set_ctrl = &mi0343_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &mi0343_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &mi0343_set_pix_format +}; + + +int sn9c102_probe_mi0343(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, 0x00, + 2, mi0343_i2c_data) < 0) + return -EIO; + + if (mi0343_i2c_data[4] != 0x32 && mi0343_i2c_data[3] != 0xe3) + return -ENODEV; + + sn9c102_attach_sensor(cam, &mi0343); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c new file mode 100644 index 00000000000..42852b7cb04 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c @@ -0,0 +1,401 @@ +/*************************************************************************** + * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor ov7630; + + +static int ov7630_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x0f, 0x18); + err += sn9c102_write_reg(cam, 0x50, 0x19); + + err += sn9c102_i2c_write(cam, 0x12, 0x80); + err += sn9c102_i2c_write(cam, 0x11, 0x01); + err += sn9c102_i2c_write(cam, 0x15, 0x34); + err += sn9c102_i2c_write(cam, 0x16, 0x03); + err += sn9c102_i2c_write(cam, 0x17, 0x1c); + err += sn9c102_i2c_write(cam, 0x18, 0xbd); + err += sn9c102_i2c_write(cam, 0x19, 0x06); + err += sn9c102_i2c_write(cam, 0x1a, 0xf6); + err += sn9c102_i2c_write(cam, 0x1b, 0x04); + err += sn9c102_i2c_write(cam, 0x20, 0xf6); + err += sn9c102_i2c_write(cam, 0x23, 0xee); + err += sn9c102_i2c_write(cam, 0x26, 0xa0); + err += sn9c102_i2c_write(cam, 0x27, 0x9a); + err += sn9c102_i2c_write(cam, 0x28, 0xa0); + err += sn9c102_i2c_write(cam, 0x29, 0x30); + err += sn9c102_i2c_write(cam, 0x2a, 0xa0); + err += sn9c102_i2c_write(cam, 0x2b, 0x1f); + err += sn9c102_i2c_write(cam, 0x2f, 0x3d); + err += sn9c102_i2c_write(cam, 0x30, 0x24); + err += sn9c102_i2c_write(cam, 0x32, 0x86); + err += sn9c102_i2c_write(cam, 0x60, 0xa9); + err += sn9c102_i2c_write(cam, 0x61, 0x42); + err += sn9c102_i2c_write(cam, 0x65, 0x00); + err += sn9c102_i2c_write(cam, 0x69, 0x38); + err += sn9c102_i2c_write(cam, 0x6f, 0x88); + err += sn9c102_i2c_write(cam, 0x70, 0x0b); + err += sn9c102_i2c_write(cam, 0x71, 0x00); + err += sn9c102_i2c_write(cam, 0x74, 0x21); + err += sn9c102_i2c_write(cam, 0x7d, 0xf7); + + return err; +} + + +static int ov7630_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value >> 2); + err += sn9c102_i2c_write(cam, 0x76, ctrl->value & 0x03); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x02, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x01, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x00, ctrl->value); + break; + case V4L2_CID_CONTRAST: + err += ctrl->value ? sn9c102_i2c_write(cam, 0x05, + (ctrl->value-1) | 0x20) + : sn9c102_i2c_write(cam, 0x05, 0x00); + break; + case V4L2_CID_BRIGHTNESS: + err += sn9c102_i2c_write(cam, 0x06, ctrl->value); + break; + case V4L2_CID_SATURATION: + err += sn9c102_i2c_write(cam, 0x03, ctrl->value << 4); + break; + case V4L2_CID_HUE: + err += ctrl->value ? sn9c102_i2c_write(cam, 0x04, + (ctrl->value-1) | 0x20) + : sn9c102_i2c_write(cam, 0x04, 0x00); + break; + case V4L2_CID_DO_WHITE_BALANCE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + case V4L2_CID_WHITENESS: + err += sn9c102_i2c_write(cam, 0x0d, ctrl->value); + break; + case V4L2_CID_AUTO_WHITE_BALANCE: + err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x78); + break; + case V4L2_CID_AUTOGAIN: + err += sn9c102_i2c_write(cam, 0x13, ctrl->value); + break; + case V4L2_CID_VFLIP: + err += sn9c102_i2c_write(cam, 0x75, 0x0e | (ctrl->value << 7)); + break; + case V4L2_CID_BLACK_LEVEL: + err += sn9c102_i2c_write(cam, 0x25, ctrl->value); + break; + case SN9C102_V4L2_CID_BRIGHT_LEVEL: + err += sn9c102_i2c_write(cam, 0x24, ctrl->value); + break; + case SN9C102_V4L2_CID_GAMMA: + err += sn9c102_i2c_write(cam, 0x14, (ctrl->value << 2) | 0x80); + break; + case SN9C102_V4L2_CID_BAND_FILTER: + err += sn9c102_i2c_write(cam, 0x2d, ctrl->value << 2); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int ov7630_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &ov7630; + int err = 0; + u8 v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1; + + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int ov7630_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x20, 0x19); + else + err += sn9c102_write_reg(cam, 0x50, 0x19); + + return err; +} + + +static struct sn9c102_sensor ov7630 = { + .name = "OV7630", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x21, + .init = &ov7630_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x14, + .flags = 0, + }, + { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "hue", + .minimum = 0x00, + .maximum = 0x1f+1, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "saturation", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x08, + .flags = 0, + }, + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "contrast", + .minimum = 0x00, + .maximum = 0x1f+1, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x000, + .maximum = 0x3ff, + .step = 0x001, + .default_value = 0x83<<2, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x3a, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x77, + .flags = 0, + }, + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0xa0, + .flags = 0, + }, + { + .id = V4L2_CID_DO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "white balance background: blue", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = V4L2_CID_WHITENESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "white balance background: red", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto white balance", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain & exposure mode", + .minimum = 0x00, + .maximum = 0x03, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLACK_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "black pixel ratio", + .minimum = 0x01, + .maximum = 0x9a, + .step = 0x01, + .default_value = 0x8a, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_BRIGHT_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "bright pixel ratio", + .minimum = 0x01, + .maximum = 0x9a, + .step = 0x01, + .default_value = 0x10, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_BAND_FILTER, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "band filter", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GAMMA, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "rgb gamma", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .set_ctrl = &ov7630_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &ov7630_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &ov7630_set_pix_format +}; + + +int sn9c102_probe_ov7630(struct sn9c102_device* cam) +{ + const struct usb_device_id ov7630_id_table[] = { + { USB_DEVICE(0x0c45, 0x602c), }, + { USB_DEVICE(0x0c45, 0x602d), }, + { USB_DEVICE(0x0c45, 0x608f), }, + { USB_DEVICE(0x0c45, 0x60b0), }, + { } + }; + int err = 0; + + if (!sn9c102_match_id(cam, ov7630_id_table)) + return -ENODEV; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + err += sn9c102_i2c_try_write(cam, &ov7630, 0x0b, 0); + if (err) + return -ENODEV; + + sn9c102_attach_sensor(cam, &ov7630); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c new file mode 100644 index 00000000000..b1dee78abe0 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c @@ -0,0 +1,307 @@ +/*************************************************************************** + * Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/delay.h> +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor pas106b; + + +static int pas106b_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x20, 0x19); + err += sn9c102_write_reg(cam, 0x09, 0x18); + + err += sn9c102_i2c_write(cam, 0x02, 0x0c); + err += sn9c102_i2c_write(cam, 0x05, 0x5a); + err += sn9c102_i2c_write(cam, 0x06, 0x88); + err += sn9c102_i2c_write(cam, 0x07, 0x80); + err += sn9c102_i2c_write(cam, 0x10, 0x06); + err += sn9c102_i2c_write(cam, 0x11, 0x06); + err += sn9c102_i2c_write(cam, 0x12, 0x00); + err += sn9c102_i2c_write(cam, 0x14, 0x02); + err += sn9c102_i2c_write(cam, 0x13, 0x01); + + msleep(400); + + return err; +} + + +static int pas106b_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = sn9c102_i2c_read(cam, 0x03), + r2 = sn9c102_i2c_read(cam, 0x04); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 4) | (r2 & 0x0f); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case V4L2_CID_GAIN: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0e)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case V4L2_CID_CONTRAST: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0f)) < 0) + return -EIO; + ctrl->value &= 0x07; + return 0; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0a)) < 0) + return -EIO; + ctrl->value = (ctrl->value & 0x1f) << 1; + return 0; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0) + return -EIO; + ctrl->value &= 0xf8; + return 0; + default: + return -EINVAL; + } +} + + +static int pas106b_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x03, ctrl->value >> 4); + err += sn9c102_i2c_write(cam, 0x04, ctrl->value & 0x0f); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x0e, ctrl->value); + break; + case V4L2_CID_CONTRAST: + err += sn9c102_i2c_write(cam, 0x0f, ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x0a, ctrl->value >> 1); + err += sn9c102_i2c_write(cam, 0x0b, ctrl->value >> 1); + break; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + err += sn9c102_i2c_write(cam, 0x08, ctrl->value << 3); + break; + default: + return -EINVAL; + } + err += sn9c102_i2c_write(cam, 0x13, 0x01); + + return err ? -EIO : 0; +} + + +static int pas106b_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &pas106b; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int pas106b_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x2c, 0x17); + else + err += sn9c102_write_reg(cam, 0x20, 0x17); + + return err; +} + + +static struct sn9c102_sensor pas106b = { + .name = "PAS106B", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x40, + .init = &pas106b_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x125, + .maximum = 0xfff, + .step = 0x001, + .default_value = 0x140, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0d, + .flags = 0, + }, + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "contrast", + .minimum = 0x00, + .maximum = 0x07, + .step = 0x01, + .default_value = 0x00, /* 0x00~0x03 have same effect */ + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x04, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x06, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x3e, + .step = 0x02, + .default_value = 0x02, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + }, + .get_ctrl = &pas106b_get_ctrl, + .set_ctrl = &pas106b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + }, + .set_crop = &pas106b_set_crop, + .pix_format = { + .width = 352, + .height = 288, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, /* we use this field as 'bits per pixel' */ + }, + .set_pix_format = &pas106b_set_pix_format +}; + + +int sn9c102_probe_pas106b(struct sn9c102_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + unsigned int pid = 0; + + /* + Minimal initialization to enable the I2C communication + NOTE: do NOT change the values! + */ + err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */ + err += sn9c102_write_reg(cam, 0x00, 0x01); /* sensor power on */ + err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */ + if (err) + return -EIO; + + r0 = sn9c102_i2c_try_read(cam, &pas106b, 0x00); + r1 = sn9c102_i2c_try_read(cam, &pas106b, 0x01); + + if (r0 < 0 || r1 < 0) + return -EIO; + + pid = (r0 << 11) | ((r1 & 0xf0) >> 4); + if (pid != 0x007) + return -ENODEV; + + sn9c102_attach_sensor(cam, &pas106b); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bca.c b/drivers/media/video/sn9c102/sn9c102_pas202bca.c new file mode 100644 index 00000000000..3453237055b --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_pas202bca.c @@ -0,0 +1,238 @@ +/*************************************************************************** + * Plug-in for PAS202BCA image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/delay.h> +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor pas202bca; + + +static int pas202bca_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x30, 0x19); + err += sn9c102_write_reg(cam, 0x09, 0x18); + + err += sn9c102_i2c_write(cam, 0x02, 0x14); + err += sn9c102_i2c_write(cam, 0x03, 0x40); + err += sn9c102_i2c_write(cam, 0x0d, 0x2c); + err += sn9c102_i2c_write(cam, 0x0e, 0x01); + err += sn9c102_i2c_write(cam, 0x0f, 0xa9); + err += sn9c102_i2c_write(cam, 0x10, 0x08); + err += sn9c102_i2c_write(cam, 0x13, 0x63); + err += sn9c102_i2c_write(cam, 0x15, 0x70); + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + msleep(400); + + return err; +} + + +static int pas202bca_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x24, 0x17); + else + err += sn9c102_write_reg(cam, 0x20, 0x17); + + return err; +} + + +static int pas202bca_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6); + err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x07, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x08, ctrl->value); + break; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + default: + return -EINVAL; + } + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + return err ? -EIO : 0; +} + + +static int pas202bca_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &pas202bca; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static struct sn9c102_sensor pas202bca = { + .name = "PAS202BCA", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x40, + .init = &pas202bca_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x01e5, + .maximum = 0x3fff, + .step = 0x0001, + .default_value = 0x01e5, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0c, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x05, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x04, + .flags = 0, + }, + }, + .set_ctrl = &pas202bca_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &pas202bca_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &pas202bca_set_pix_format +}; + + +int sn9c102_probe_pas202bca(struct sn9c102_device* cam) +{ + const struct usb_device_id pas202bca_id_table[] = { + { USB_DEVICE(0x0c45, 0x60af), }, + { } + }; + int err = 0; + + if (!sn9c102_match_id(cam,pas202bca_id_table)) + return -ENODEV; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x40, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + if (sn9c102_i2c_try_write(cam, &pas202bca, 0x10, 0)) /* try to write */ + return -ENODEV; + + sn9c102_attach_sensor(cam, &pas202bca); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c new file mode 100644 index 00000000000..d068616ab33 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c @@ -0,0 +1,293 @@ +/*************************************************************************** + * Plug-in for PAS202BCB image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * + * <medaglia@undl.org.br> * + * http://cadu.homelinux.com:8080/ * + * * + * DAC Magnitude, exposure and green gain controls added by * + * Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/delay.h> +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor pas202bcb; + + +static int pas202bcb_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x30, 0x19); + err += sn9c102_write_reg(cam, 0x09, 0x18); + + err += sn9c102_i2c_write(cam, 0x02, 0x14); + err += sn9c102_i2c_write(cam, 0x03, 0x40); + err += sn9c102_i2c_write(cam, 0x0d, 0x2c); + err += sn9c102_i2c_write(cam, 0x0e, 0x01); + err += sn9c102_i2c_write(cam, 0x0f, 0xa9); + err += sn9c102_i2c_write(cam, 0x10, 0x08); + err += sn9c102_i2c_write(cam, 0x13, 0x63); + err += sn9c102_i2c_write(cam, 0x15, 0x70); + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + msleep(400); + + return err; +} + + +static int pas202bcb_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = sn9c102_i2c_read(cam, 0x04), + r2 = sn9c102_i2c_read(cam, 0x05); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 6) | (r2 & 0x3f); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x07)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_GAIN: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x10)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0) + return -EIO; + return 0; + default: + return -EINVAL; + } +} + + +static int pas202bcb_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x24, 0x17); + else + err += sn9c102_write_reg(cam, 0x20, 0x17); + + return err; +} + + +static int pas202bcb_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6); + err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x07, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x08, ctrl->value); + break; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + default: + return -EINVAL; + } + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + return err ? -EIO : 0; +} + + +static int pas202bcb_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &pas202bcb; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static struct sn9c102_sensor pas202bcb = { + .name = "PAS202BCB", + .maintainer = "Carlos Eduardo Medaglia Dyonisio " + "<medaglia@undl.org.br>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x40, + .init = &pas202bcb_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x01e5, + .maximum = 0x3fff, + .step = 0x0001, + .default_value = 0x01e5, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0c, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x05, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x04, + .flags = 0, + }, + }, + .get_ctrl = &pas202bcb_get_ctrl, + .set_ctrl = &pas202bcb_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &pas202bcb_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &pas202bcb_set_pix_format +}; + + +int sn9c102_probe_pas202bcb(struct sn9c102_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + unsigned int pid = 0; + + /* + * Minimal initialization to enable the I2C communication + * NOTE: do NOT change the values! + */ + err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */ + err += sn9c102_write_reg(cam, 0x40, 0x01); /* sensor power on */ + err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */ + if (err) + return -EIO; + + r0 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x00); + r1 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x01); + + if (r0 < 0 || r1 < 0) + return -EIO; + + pid = (r0 << 4) | ((r1 & 0xf0) >> 4); + if (pid != 0x017) + return -ENODEV; + + sn9c102_attach_sensor(cam, &pas202bcb); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h new file mode 100644 index 00000000000..2afd9e9d09b --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -0,0 +1,389 @@ +/*************************************************************************** + * API for image sensors connected to the SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _SN9C102_SENSOR_H_ +#define _SN9C102_SENSOR_H_ + +#include <linux/usb.h> +#include <linux/videodev.h> +#include <linux/device.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <asm/types.h> + +struct sn9c102_device; +struct sn9c102_sensor; + +/*****************************************************************************/ + +/* + OVERVIEW. + This is a small interface that allows you to add support for any CCD/CMOS + image sensors connected to the SN9C10X bridges. The entire API is documented + below. In the most general case, to support a sensor there are three steps + you have to follow: + 1) define the main "sn9c102_sensor" structure by setting the basic fields; + 2) write a probing function to be called by the core module when the USB + camera is recognized, then add both the USB ids and the name of that + function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see + below); + 3) implement the methods that you want/need (and fill the rest of the main + structure accordingly). + "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do + NOT need to touch the source code of the core module for the things to work + properly, unless you find bugs or flaws in it. Finally, do not forget to + read the V4L2 API for completeness. +*/ + +/*****************************************************************************/ + +/* + Probing functions: on success, you must attach the sensor to the camera + by calling sn9c102_attach_sensor() provided below. + To enable the I2C communication, you might need to perform a really basic + initialization of the SN9C10X chip by using the write function declared + ahead. + Functions must return 0 on success, the appropriate error otherwise. +*/ +extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam); +extern int sn9c102_probe_mi0343(struct sn9c102_device* cam); +extern int sn9c102_probe_ov7630(struct sn9c102_device* cam); +extern int sn9c102_probe_pas106b(struct sn9c102_device* cam); +extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam); +extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam); +extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); +extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam); + +/* + Add the above entries to this table. Be sure to add the entry in the right + place, since, on failure, the next probing routine is called according to + the order of the list below, from top to bottom. +*/ +#define SN9C102_SENSOR_TABLE \ +static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \ + &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \ + &sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \ + &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \ + &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \ + NULL, \ +}; + +/* Device identification */ +extern struct sn9c102_device* +sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id); + +/* Attach a probed sensor to the camera. */ +extern void +sn9c102_attach_sensor(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor); + +/* + Each SN9C10x camera has proper PID/VID identifiers. + SN9C103 supports multiple interfaces, but we only handle the video class + interface. +*/ +#define SN9C102_USB_DEVICE(vend, prod, intclass) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (intclass) + +#define SN9C102_ID_TABLE \ +static const struct usb_device_id sn9c102_id_table[] = { \ + { USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6007), }, \ + { USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x6024), }, \ + { USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */ \ + { USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */ \ + { USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \ + { USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x602d), }, \ + { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), }, \ + { } \ +}; + +/*****************************************************************************/ + +/* + Read/write routines: they always return -1 on error, 0 or the read value + otherwise. NOTE that a real read operation is not supported by the SN9C10X + chip for some of its registers. To work around this problem, a pseudo-read + call is provided instead: it returns the last successfully written value + on the register (0 if it has never been written), the usual -1 on error. +*/ + +/* The "try" I2C I/O versions are used when probing the sensor */ +extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address, u8 value); +extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address); + +/* + These must be used if and only if the sensor doesn't implement the standard + I2C protocol. There are a number of good reasons why you must use the + single-byte versions of these functions: do not abuse. The first function + writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X + chip. The second one programs the registers 0x09 and 0x10 with data0 and + data1, and places the n bytes read from the sensor register table in the + buffer pointed by 'buffer'. Both the functions return -1 on error; the write + version returns 0 on success, while the read version returns the first read + byte. +*/ +extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 n, + u8 data0, u8 data1, u8 data2, u8 data3, + u8 data4, u8 data5); +extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 data0, + u8 data1, u8 n, u8 buffer[]); + +/* To be used after the sensor struct has been attached to the camera struct */ +extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value); +extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address); + +/* I/O on registers in the bridge. Could be used by the sensor methods too */ +extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index); +extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index); +extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index); + +/* + NOTE: there are no exported debugging functions. To uniform the output you + must use the dev_info()/dev_warn()/dev_err() macros defined in device.h, + already included here, the argument being the struct device '&usbdev->dev' + of the sensor structure. Do NOT use these macros before the sensor is + attached or the kernel will crash! However, you should not need to notify + the user about common errors or other messages, since this is done by the + master module. +*/ + +/*****************************************************************************/ + +enum sn9c102_i2c_sysfs_ops { + SN9C102_I2C_READ = 0x01, + SN9C102_I2C_WRITE = 0x02, +}; + +enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */ + SN9C102_I2C_100KHZ = 0x01, + SN9C102_I2C_400KHZ = 0x02, +}; + +enum sn9c102_i2c_interface { + SN9C102_I2C_2WIRES, + SN9C102_I2C_3WIRES, +}; + +#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 + +struct sn9c102_sensor { + char name[32], /* sensor name */ + maintainer[64]; /* name of the mantainer <email> */ + + /* Supported operations through the 'sysfs' interface */ + enum sn9c102_i2c_sysfs_ops sysfs_ops; + + /* + These sensor capabilities must be provided if the SN9C10X controller + needs to communicate through the sensor serial interface by using + at least one of the i2c functions available. + */ + enum sn9c102_i2c_frequency frequency; + enum sn9c102_i2c_interface interface; + + /* + This identifier must be provided if the image sensor implements + the standard I2C protocol. + */ + u8 i2c_slave_id; /* reg. 0x09 */ + + /* + NOTE: Where not noted,most of the functions below are not mandatory. + Set to null if you do not implement them. If implemented, + they must return 0 on success, the proper error otherwise. + */ + + int (*init)(struct sn9c102_device* cam); + /* + This function will be called after the sensor has been attached. + It should be used to initialize the sensor only, but may also + configure part of the SN9C10X chip if necessary. You don't need to + setup picture settings like brightness, contrast, etc.. here, if + the corrisponding controls are implemented (see below), since + they are adjusted in the core driver by calling the set_ctrl() + method after init(), where the arguments are the default values + specified in the v4l2_queryctrl list of supported controls; + Same suggestions apply for other settings, _if_ the corresponding + methods are present; if not, the initialization must configure the + sensor according to the default configuration structures below. + */ + + struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS]; + /* + Optional list of default controls, defined as indicated in the + V4L2 API. Menu type controls are not handled by this interface. + */ + + int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl); + int (*set_ctrl)(struct sn9c102_device* cam, + const struct v4l2_control* ctrl); + /* + You must implement at least the set_ctrl method if you have defined + the list above. The returned value must follow the V4L2 + specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER + are not supported by this driver, so do not implement them. Also, + you don't have to check whether the passed values are out of bounds, + given that this is done by the core module. + */ + + struct v4l2_cropcap cropcap; + /* + Think the image sensor as a grid of R,G,B monochromatic pixels + disposed according to a particular Bayer pattern, which describes + the complete array of pixels, from (0,0) to (xmax, ymax). We will + use this coordinate system from now on. It is assumed the sensor + chip can be programmed to capture/transmit a subsection of that + array of pixels: we will call this subsection "active window". + It is not always true that the largest achievable active window can + cover the whole array of pixels. The V4L2 API defines another + area called "source rectangle", which, in turn, is a subrectangle of + the active window. The SN9C10X chip is always programmed to read the + source rectangle. + The bounds of both the active window and the source rectangle are + specified in the cropcap substructures 'bounds' and 'defrect'. + By default, the source rectangle should cover the largest possible + area. Again, it is not always true that the largest source rectangle + can cover the entire active window, although it is a rare case for + the hardware we have. The bounds of the source rectangle _must_ be + multiple of 16 and must use the same coordinate system as indicated + before; their centers shall align initially. + If necessary, the sensor chip must be initialized during init() to + set the bounds of the active sensor window; however, by default, it + usually covers the largest achievable area (maxwidth x maxheight) + of pixels, so no particular initialization is needed, if you have + defined the correct default bounds in the structures. + See the V4L2 API for further details. + NOTE: once you have defined the bounds of the active window + (struct cropcap.bounds) you must not change them.anymore. + Only 'bounds' and 'defrect' fields are mandatory, other fields + will be ignored. + */ + + int (*set_crop)(struct sn9c102_device* cam, + const struct v4l2_rect* rect); + /* + To be called on VIDIOC_C_SETCROP. The core module always calls a + default routine which configures the appropriate SN9C10X regs (also + scaling), but you may need to override/adjust specific stuff. + 'rect' contains width and height values that are multiple of 16: in + case you override the default function, you always have to program + the chip to match those values; on error return the corresponding + error code without rolling back. + NOTE: in case, you must program the SN9C10X chip to get rid of + blank pixels or blank lines at the _start_ of each line or + frame after each HSYNC or VSYNC, so that the image starts with + real RGB data (see regs 0x12, 0x13) (having set H_SIZE and, + V_SIZE you don't have to care about blank pixels or blank + lines at the end of each line or frame). + */ + + struct v4l2_pix_format pix_format; + /* + What you have to define here are: 1) initial 'width' and 'height' of + the target rectangle 2) the initial 'pixelformat', which can be + either V4L2_PIX_FMT_SN9C10X (for compressed video) or + V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the + number of bits per pixel for uncompressed video, 8 or 9 (despite the + current value of 'pixelformat'). + NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4 + of cropcap.defrect.width and cropcap.defrect.height. I + suggest 1/1. + NOTE 2: The initial compression quality is defined by the first bit + of reg 0x17 during the initialization of the image sensor. + NOTE 3: as said above, you have to program the SN9C10X chip to get + rid of any blank pixels, so that the output of the sensor + matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR). + */ + + int (*set_pix_format)(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix); + /* + To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to + SN9C10X pixel format or viceversa. On error return the corresponding + error code without rolling back. + */ + + /* + Do NOT write to the data below, it's READ ONLY. It is used by the + core module to store successfully updated values of the above + settings, for rollbacks..etc..in case of errors during atomic I/O + */ + struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +/*****************************************************************************/ + +/* Private ioctl's for control settings supported by some image sensors */ +#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE +#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 +#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2 +#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3 +#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4 +#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5 +#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6 + +#endif /* _SN9C102_SENSOR_H_ */ diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c new file mode 100644 index 00000000000..2e08c552f40 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c @@ -0,0 +1,159 @@ +/*************************************************************************** + * Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor tas5110c1b; + + +static int tas5110c1b_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x44, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x0a, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x06, 0x18); + err += sn9c102_write_reg(cam, 0xfb, 0x19); + + err += sn9c102_i2c_write(cam, 0xc0, 0x80); + + return err; +} + + +static int tas5110c1b_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int tas5110c1b_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &tas5110c1b; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 69, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 9; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + /* Don't change ! */ + err += sn9c102_write_reg(cam, 0x14, 0x1a); + err += sn9c102_write_reg(cam, 0x0a, 0x1b); + err += sn9c102_write_reg(cam, sn9c102_pread_reg(cam, 0x19), 0x19); + + return err; +} + + +static int tas5110c1b_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x2b, 0x19); + else + err += sn9c102_write_reg(cam, 0xfb, 0x19); + + return err; +} + + +static struct sn9c102_sensor tas5110c1b = { + .name = "TAS5110C1B", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_3WIRES, + .init = &tas5110c1b_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0xf6, + .step = 0x01, + .default_value = 0x40, + .flags = 0, + }, + }, + .set_ctrl = &tas5110c1b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + }, + .set_crop = &tas5110c1b_set_crop, + .pix_format = { + .width = 352, + .height = 288, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &tas5110c1b_set_pix_format +}; + + +int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam) +{ + const struct usb_device_id tas5110c1b_id_table[] = { + { USB_DEVICE(0x0c45, 0x6001), }, + { USB_DEVICE(0x0c45, 0x6005), }, + { USB_DEVICE(0x0c45, 0x60ab), }, + { } + }; + + /* Sensor detection is based on USB pid/vid */ + if (!sn9c102_match_id(cam, tas5110c1b_id_table)) + return -ENODEV; + + sn9c102_attach_sensor(cam, &tas5110c1b); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c new file mode 100644 index 00000000000..c7b339740bb --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c @@ -0,0 +1,169 @@ +/*************************************************************************** + * Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor tas5130d1b; + + +static int tas5130d1b_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x04, 0x01); + err += sn9c102_write_reg(cam, 0x01, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x07, 0x18); + + return err; +} + + +static int tas5130d1b_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value); + break; + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int tas5130d1b_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &tas5130d1b; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 104, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 12; + int err = 0; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + /* Do NOT change! */ + err += sn9c102_write_reg(cam, 0x1f, 0x1a); + err += sn9c102_write_reg(cam, 0x1a, 0x1b); + err += sn9c102_write_reg(cam, sn9c102_pread_reg(cam, 0x19), 0x19); + + return err; +} + + +static int tas5130d1b_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x63, 0x19); + else + err += sn9c102_write_reg(cam, 0xf3, 0x19); + + return err; +} + + +static struct sn9c102_sensor tas5130d1b = { + .name = "TAS5130D1B", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_3WIRES, + .init = &tas5130d1b_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0xf6, + .step = 0x02, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x47, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .set_ctrl = &tas5130d1b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &tas5130d1b_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &tas5130d1b_set_pix_format +}; + + +int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam) +{ + const struct usb_device_id tas5130d1b_id_table[] = { + { USB_DEVICE(0x0c45, 0x6025), }, + { USB_DEVICE(0x0c45, 0x60aa), }, + { } + }; + + /* Sensor detection is based on USB pid/vid */ + if (!sn9c102_match_id(cam, tas5130d1b_id_table)) + return -ENODEV; + + sn9c102_attach_sensor(cam, &tas5130d1b); + + return 0; +} diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c new file mode 100644 index 00000000000..9636da20748 --- /dev/null +++ b/drivers/media/video/stv680.c @@ -0,0 +1,1508 @@ +/* + * STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net) + * + * Thanks to STMicroelectronics for information on the usb commands, and + * to Steve Miller at STM for his help and encouragement while I was + * writing this driver. + * + * This driver is based heavily on the + * Endpoints (formerly known as AOX) se401 USB Camera Driver + * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) + * + * Still somewhat based on the Linux ov511 driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History: + * ver 0.1 October, 2001. Initial attempt. + * + * ver 0.2 November, 2001. Fixed asbility to resize, added brightness + * function, made more stable (?) + * + * ver 0.21 Nov, 2001. Added gamma correction and white balance, + * due to Alexander Schwartz. Still trying to + * improve stablility. Moved stuff into stv680.h + * + * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet, + * mike@easysw.com) from GIMP, also used in pencam. + * Simple, fast, good integer math routine. + * + * ver 0.23 Dec, 2001 (gkh) + * Took out sharpen function, ran code through + * Lindent, and did other minor tweaks to get + * things to work properly with 2.5.1 + * + * ver 0.24 Jan, 2002 (kjs) + * Fixed the problem with webcam crashing after + * two pictures. Changed the way pic is halved to + * improve quality. Got rid of green line around + * frame. Fix brightness reset when changing size + * bug. Adjusted gamma filters slightly. + * + * ver 0.25 Jan, 2002 (kjs) + * Fixed a bug in which the driver sometimes attempted + * to set to a non-supported size. This allowed + * gnomemeeting to work. + * Fixed proc entry removal bug. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/pagemap.h> +#include <linux/errno.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +#include "stv680.h" + +static int video_nr = -1; +static int swapRGB = 0; /* default for auto sleect */ +static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */ + +static unsigned int debug = 0; + +#define PDEBUG(level, fmt, args...) \ + do { \ + if (debug >= level) \ + info("[%s:%d] " fmt, __FUNCTION__, __LINE__ , ## args); \ + } while (0) + + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.25" +#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>" +#define DRIVER_DESC "STV0680 USB Camera Driver" + +MODULE_AUTHOR (DRIVER_AUTHOR); +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_LICENSE ("GPL"); +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC (debug, "Debug enabled or not"); +module_param(swapRGB_on, int, 0); +MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never"); +module_param(video_nr, int, 0); + +/******************************************************************** + * + * Memory management + * + * This is a shameless copy from the USB-cpia driver (linux kernel + * version 2.3.29 or so, I have no idea what this code actually does ;). + * Actually it seems to be a copy of a shameless copy of the bttv-driver. + * Or that is a copy of a shameless copy of ... (To the powers: is there + * no generic kernel-function to do this sort of stuff?) + * + * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says + * there will be one, but apparentely not yet -jerdfelt + * + * So I copied it again for the ov511 driver -claudio + * + * Same for the se401 driver -Jeroen + * + * And the STV0680 driver - Kevin + ********************************************************************/ +static void *rvmalloc (unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32 (size); + if (!mem) + return NULL; + + memset (mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + return mem; +} + +static void rvfree (void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree (mem); +} + + +/********************************************************************* + * pencam read/write functions + ********************************************************************/ + +static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size) +{ + int ret = -1; + + switch (set) { + case 0: /* 0xc1 */ + ret = usb_control_msg (stv680->udev, + usb_rcvctrlpipe (stv680->udev, 0), + req, + (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + case 1: /* 0x41 */ + ret = usb_control_msg (stv680->udev, + usb_sndctrlpipe (stv680->udev, 0), + req, + (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + case 2: /* 0x80 */ + ret = usb_control_msg (stv680->udev, + usb_rcvctrlpipe (stv680->udev, 0), + req, + (USB_DIR_IN | USB_RECIP_DEVICE), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + case 3: /* 0x40 */ + ret = usb_control_msg (stv680->udev, + usb_sndctrlpipe (stv680->udev, 0), + req, + (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + } + if ((ret < 0) && (req != 0x0a)) { + PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret); + } + return ret; +} + +static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate) +{ + + if (configuration != dev->udev->actconfig->desc.bConfigurationValue + || usb_reset_configuration (dev->udev) < 0) { + PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration); + return -1; + } + if (usb_set_interface (dev->udev, interface, alternate) < 0) { + PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate); + return -1; + } + return 0; +} + +static int stv_stop_video (struct usb_stv *dev) +{ + int i; + unsigned char *buf; + + buf = kmalloc (40, GFP_KERNEL); + if (buf == NULL) { + PDEBUG (0, "STV(e): Out of (small buf) memory"); + return -1; + } + + /* this is a high priority command; it stops all lower order commands */ + if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) { + i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02); /* Get Last Error; 2 = busy */ + PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buf[0], buf[1]); + } else { + PDEBUG (1, "STV(i): Camera reset to idle mode."); + } + + if ((i = stv_set_config (dev, 1, 0, 0)) < 0) + PDEBUG (1, "STV(e): Reset config during exit failed"); + + /* get current mode */ + buf[0] = 0xf0; + if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08) /* get mode */ + PDEBUG (0, "STV(e): Stop_video: problem setting original mode"); + if (dev->origMode != buf[0]) { + memset (buf, 0, 8); + buf[0] = (unsigned char) dev->origMode; + if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) { + PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed"); + i = -1; + } + buf[0] = 0xf0; + i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08); + if ((i != 0x08) || (buf[0] != dev->origMode)) { + PDEBUG (0, "STV(e): camera NOT set to original resolution."); + i = -1; + } else + PDEBUG (0, "STV(i): Camera set to original resolution"); + } + /* origMode */ + kfree(buf); + return i; +} + +static int stv_set_video_mode (struct usb_stv *dev) +{ + int i, stop_video = 1; + unsigned char *buf; + + buf = kmalloc (40, GFP_KERNEL); + if (buf == NULL) { + PDEBUG (0, "STV(e): Out of (small buf) memory"); + return -1; + } + + if ((i = stv_set_config (dev, 1, 0, 0)) < 0) { + kfree(buf); + return i; + } + + i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12); + if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) { + PDEBUG (1, "STV(e): Could not get descriptor 0100."); + goto error; + } + + /* set alternate interface 1 */ + if ((i = stv_set_config (dev, 1, 0, 1)) < 0) + goto error; + + if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10) + goto error; + PDEBUG (1, "STV(i): Setting video mode."); + /* Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240) */ + if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) { + stop_video = 0; + goto error; + } + goto exit; + +error: + kfree(buf); + if (stop_video == 1) + stv_stop_video (dev); + return -1; + +exit: + kfree(buf); + return 0; +} + +static int stv_init (struct usb_stv *stv680) +{ + int i = 0; + unsigned char *buffer; + unsigned long int bufsize; + + buffer = kzalloc (40, GFP_KERNEL); + if (buffer == NULL) { + PDEBUG (0, "STV(e): Out of (small buf) memory"); + return -1; + } + udelay (100); + + /* set config 1, interface 0, alternate 0 */ + if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) { + kfree(buffer); + PDEBUG (0, "STV(e): set config 1,0,0 failed"); + return -1; + } + /* ping camera to be sure STV0680 is present */ + if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02) + goto error; + if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) { + PDEBUG (1, "STV(e): camera ping failed!!"); + goto error; + } + + /* get camera descriptor */ + if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09) + goto error; + i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22); + if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) { + PDEBUG (1, "STV(e): Could not get descriptor 0200."); + goto error; + } + if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02) + goto error; + if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24) + goto error; + if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) + goto error; + + stv680->SupportedModes = buffer[7]; + i = stv680->SupportedModes; + stv680->CIF = 0; + stv680->VGA = 0; + stv680->QVGA = 0; + if (i & 1) + stv680->CIF = 1; + if (i & 2) + stv680->VGA = 1; + if (i & 8) + stv680->QVGA = 1; + if (stv680->SupportedModes == 0) { + PDEBUG (0, "STV(e): There are NO supported STV680 modes!!"); + i = -1; + goto error; + } else { + if (stv680->CIF) + PDEBUG (0, "STV(i): CIF is supported"); + if (stv680->QVGA) + PDEBUG (0, "STV(i): QVGA is supported"); + } + /* FW rev, ASIC rev, sensor ID */ + PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]); + PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]); + PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4)); + + /* set alternate interface 1 */ + if ((i = stv_set_config (stv680, 1, 0, 1)) < 0) + goto error; + + if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) + goto error; + if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08) + goto error; + i = buffer[3]; + PDEBUG (0, "STV(i): Camera has %i pictures.", i); + + /* get current mode */ + if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08) + goto error; + stv680->origMode = buffer[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */ + + /* This will attemp CIF mode, if supported. If not, set to QVGA */ + memset (buffer, 0, 8); + if (stv680->CIF) + buffer[0] = 0x00; + else if (stv680->QVGA) + buffer[0] = 0x03; + if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) { + PDEBUG (0, "STV(i): Set_Camera_Mode failed"); + i = -1; + goto error; + } + buffer[0] = 0xf0; + stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08); + if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) { + PDEBUG (0, "STV(e): Error setting camera video mode!"); + i = -1; + goto error; + } else { + if (buffer[0] == 0) { + stv680->VideoMode = 0x0000; + PDEBUG (0, "STV(i): Video Mode set to CIF"); + } + if (buffer[0] == 0x03) { + stv680->VideoMode = 0x0300; + PDEBUG (0, "STV(i): Video Mode set to QVGA"); + } + } + if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10) + goto error; + bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]); + stv680->cwidth = (buffer[4] << 8) | (buffer[5]); /* ->camera = 322, 356, 644 */ + stv680->cheight = (buffer[6] << 8) | (buffer[7]); /* ->camera = 242, 292, 484 */ + stv680->origGain = buffer[12]; + + goto exit; + +error: + i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02); /* Get Last Error */ + PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buffer[0], buffer[1]); + kfree(buffer); + return -1; + +exit: + kfree(buffer); + + /* video = 320x240, 352x288 */ + if (stv680->CIF == 1) { + stv680->maxwidth = 352; + stv680->maxheight = 288; + stv680->vwidth = 352; + stv680->vheight = 288; + } + if (stv680->QVGA == 1) { + stv680->maxwidth = 320; + stv680->maxheight = 240; + stv680->vwidth = 320; + stv680->vheight = 240; + } + + stv680->rawbufsize = bufsize; /* must be ./. by 8 */ + stv680->maxframesize = bufsize * 3; /* RGB size */ + PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight); + PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize); + + /* some default values */ + stv680->bulk_in_endpointAddr = 0x82; + stv680->dropped = 0; + stv680->error = 0; + stv680->framecount = 0; + stv680->readcount = 0; + stv680->streaming = 0; + /* bright, white, colour, hue, contrast are set by software, not in stv0680 */ + stv680->brightness = 32767; + stv680->chgbright = 0; + stv680->whiteness = 0; /* only for greyscale */ + stv680->colour = 32767; + stv680->contrast = 32767; + stv680->hue = 32767; + stv680->palette = STV_VIDEO_PALETTE; + stv680->depth = 24; /* rgb24 bits */ + if ((swapRGB_on == 0) && (swapRGB == 0)) + PDEBUG (1, "STV(i): swapRGB is (auto) OFF"); + else if ((swapRGB_on == 0) && (swapRGB == 1)) + PDEBUG (1, "STV(i): swapRGB is (auto) ON"); + else if (swapRGB_on == 1) + PDEBUG (1, "STV(i): swapRGB is (forced) ON"); + else if (swapRGB_on == -1) + PDEBUG (1, "STV(i): swapRGB is (forced) OFF"); + + if (stv_set_video_mode (stv680) < 0) { + PDEBUG (0, "STV(e): Could not set video mode in stv_init"); + return -1; + } + + return 0; +} + +/***************** last of pencam routines *******************/ + +/**************************************************************************** + * sysfs + ***************************************************************************/ +#define stv680_file(name, variable, field) \ +static ssize_t show_##name(struct class_device *class_dev, char *buf) \ +{ \ + struct video_device *vdev = to_video_device(class_dev); \ + struct usb_stv *stv = video_get_drvdata(vdev); \ + return sprintf(buf, field, stv->variable); \ +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); + +stv680_file(model, camera_name, "%s\n"); +stv680_file(in_use, user, "%d\n"); +stv680_file(streaming, streaming, "%d\n"); +stv680_file(palette, palette, "%i\n"); +stv680_file(frames_total, readcount, "%d\n"); +stv680_file(frames_read, framecount, "%d\n"); +stv680_file(packets_dropped, dropped, "%d\n"); +stv680_file(decoding_errors, error, "%d\n"); + +static void stv680_create_sysfs_files(struct video_device *vdev) +{ + video_device_create_file(vdev, &class_device_attr_model); + video_device_create_file(vdev, &class_device_attr_in_use); + video_device_create_file(vdev, &class_device_attr_streaming); + video_device_create_file(vdev, &class_device_attr_palette); + video_device_create_file(vdev, &class_device_attr_frames_total); + video_device_create_file(vdev, &class_device_attr_frames_read); + video_device_create_file(vdev, &class_device_attr_packets_dropped); + video_device_create_file(vdev, &class_device_attr_decoding_errors); +} + +static void stv680_remove_sysfs_files(struct video_device *vdev) +{ + video_device_remove_file(vdev, &class_device_attr_model); + video_device_remove_file(vdev, &class_device_attr_in_use); + video_device_remove_file(vdev, &class_device_attr_streaming); + video_device_remove_file(vdev, &class_device_attr_palette); + video_device_remove_file(vdev, &class_device_attr_frames_total); + video_device_remove_file(vdev, &class_device_attr_frames_read); + video_device_remove_file(vdev, &class_device_attr_packets_dropped); + video_device_remove_file(vdev, &class_device_attr_decoding_errors); +} + +/******************************************************************** + * Camera control + *******************************************************************/ + +static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p) +{ + /* This sets values for v4l interface. max/min = 65535/0 */ + + p->brightness = stv680->brightness; + p->whiteness = stv680->whiteness; /* greyscale */ + p->colour = stv680->colour; + p->contrast = stv680->contrast; + p->hue = stv680->hue; + p->palette = stv680->palette; + p->depth = stv680->depth; + return 0; +} + +static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p) +{ + /* See above stv680_get_pict */ + + if (p->palette != STV_VIDEO_PALETTE) { + PDEBUG (2, "STV(e): Palette set error in _set_pic"); + return 1; + } + + if (stv680->brightness != p->brightness) { + stv680->chgbright = 1; + stv680->brightness = p->brightness; + } + + stv680->whiteness = p->whiteness; /* greyscale */ + stv680->colour = p->colour; + stv680->contrast = p->contrast; + stv680->hue = p->hue; + stv680->palette = p->palette; + stv680->depth = p->depth; + + return 0; +} + +static void stv680_video_irq (struct urb *urb, struct pt_regs *regs) +{ + struct usb_stv *stv680 = urb->context; + int length = urb->actual_length; + + if (length < stv680->rawbufsize) + PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length); + + /* ohoh... */ + if (!stv680->streaming) + return; + + if (!stv680->udev) { + PDEBUG (0, "STV(e): device vapourished in video_irq"); + return; + } + + /* 0 sized packets happen if we are to fast, but sometimes the camera + keeps sending them forever... + */ + if (length && !urb->status) { + stv680->nullpackets = 0; + switch (stv680->scratch[stv680->scratch_next].state) { + case BUFFER_READY: + case BUFFER_BUSY: + stv680->dropped++; + break; + + case BUFFER_UNUSED: + memcpy (stv680->scratch[stv680->scratch_next].data, + (unsigned char *) urb->transfer_buffer, length); + stv680->scratch[stv680->scratch_next].state = BUFFER_READY; + stv680->scratch[stv680->scratch_next].length = length; + if (waitqueue_active (&stv680->wq)) { + wake_up_interruptible (&stv680->wq); + } + stv680->scratch_overflow = 0; + stv680->scratch_next++; + if (stv680->scratch_next >= STV680_NUMSCRATCH) + stv680->scratch_next = 0; + break; + } /* switch */ + } else { + stv680->nullpackets++; + if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { + if (waitqueue_active (&stv680->wq)) { + wake_up_interruptible (&stv680->wq); + } + } + } /* if - else */ + + /* Resubmit urb for new data */ + urb->status = 0; + urb->dev = stv680->udev; + if (usb_submit_urb (urb, GFP_ATOMIC)) + PDEBUG (0, "STV(e): urb burned down in video irq"); + return; +} /* _video_irq */ + +static int stv680_start_stream (struct usb_stv *stv680) +{ + struct urb *urb; + int err = 0, i; + + stv680->streaming = 1; + + /* Do some memory allocation */ + for (i = 0; i < STV680_NUMFRAMES; i++) { + stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize; + stv680->frame[i].curpix = 0; + } + /* packet size = 4096 */ + for (i = 0; i < STV680_NUMSBUF; i++) { + stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); + if (stv680->sbuf[i].data == NULL) { + PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i); + return -1; + } + } + + stv680->scratch_next = 0; + stv680->scratch_use = 0; + stv680->scratch_overflow = 0; + for (i = 0; i < STV680_NUMSCRATCH; i++) { + stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); + if (stv680->scratch[i].data == NULL) { + PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i); + return -1; + } + stv680->scratch[i].state = BUFFER_UNUSED; + } + + for (i = 0; i < STV680_NUMSBUF; i++) { + urb = usb_alloc_urb (0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */ + usb_fill_bulk_urb (urb, stv680->udev, + usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr), + stv680->sbuf[i].data, stv680->rawbufsize, + stv680_video_irq, stv680); + stv680->urb[i] = urb; + err = usb_submit_urb (stv680->urb[i], GFP_KERNEL); + if (err) + PDEBUG (0, "STV(e): urb burned down in start stream"); + } /* i STV680_NUMSBUF */ + + stv680->framecount = 0; + return 0; +} + +static int stv680_stop_stream (struct usb_stv *stv680) +{ + int i; + + if (!stv680->streaming || !stv680->udev) + return 1; + + stv680->streaming = 0; + + for (i = 0; i < STV680_NUMSBUF; i++) + if (stv680->urb[i]) { + usb_kill_urb (stv680->urb[i]); + usb_free_urb (stv680->urb[i]); + stv680->urb[i] = NULL; + kfree(stv680->sbuf[i].data); + } + for (i = 0; i < STV680_NUMSCRATCH; i++) { + kfree(stv680->scratch[i].data); + stv680->scratch[i].data = NULL; + } + + return 0; +} + +static int stv680_set_size (struct usb_stv *stv680, int width, int height) +{ + int wasstreaming = stv680->streaming; + + /* Check to see if we need to change */ + if ((stv680->vwidth == width) && (stv680->vheight == height)) + return 0; + + PDEBUG (1, "STV(i): size request for %i x %i", width, height); + /* Check for a valid mode */ + if ((!width || !height) || ((width & 1) || (height & 1))) { + PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); + return 1; + } + + if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) { + width = stv680->maxwidth / 2; + height = stv680->maxheight / 2; + } else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) { + width = 160; + height = 120; + } else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) { + width = 176; + height = 144; + } else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) { + width = 320; + height = 240; + } else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) { + width = 352; + height = 288; + } else { + PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); + return 1; + } + + /* Stop a current stream and start it again at the new size */ + if (wasstreaming) + stv680_stop_stream (stv680); + stv680->vwidth = width; + stv680->vheight = height; + PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight); + if (wasstreaming) + stv680_start_stream (stv680); + + return 0; +} + +/********************************************************************** + * Video Decoding + **********************************************************************/ + +/******* routines from the pencam program; hey, they work! ********/ + +/* + * STV0680 Vision Camera Chipset Driver + * Copyright (C) 2000 Adam Harrison <adam@antispin.org> +*/ + +#define RED 0 +#define GREEN 1 +#define BLUE 2 +#define AD(x, y, w) (((y)*(w)+(x))*3) + +static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer) +{ + int x, y, i; + int w = stv680->cwidth; + int vw = stv680->cwidth, vh = stv680->cheight; + unsigned int p = 0; + int colour = 0, bayer = 0; + unsigned char *raw = buffer->data; + struct stv680_frame *frame = &stv680->frame[stv680->curframe]; + unsigned char *output = frame->data; + unsigned char *temp = frame->data; + int offset = buffer->offset; + + if (frame->curpix == 0) { + if (frame->grabstate == FRAME_READY) { + frame->grabstate = FRAME_GRABBING; + } + } + if (offset != frame->curpix) { /* Regard frame as lost :( */ + frame->curpix = 0; + stv680->error++; + return; + } + + if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) { + vw = 320; + vh = 240; + } + if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) { + vw = 352; + vh = 288; + } + + memset (output, 0, 3 * vw * vh); /* clear output matrix. */ + + for (y = 0; y < vh; y++) { + for (x = 0; x < vw; x++) { + if (x & 1) + p = *(raw + y * w + (x >> 1)); + else + p = *(raw + y * w + (x >> 1) + (w >> 1)); + + if (y & 1) + bayer = 2; + else + bayer = 0; + if (x & 1) + bayer++; + + switch (bayer) { + case 0: + case 3: + colour = 1; + break; + case 1: + colour = 0; + break; + case 2: + colour = 2; + break; + } + i = (y * vw + x) * 3; + *(output + i + colour) = (unsigned char) p; + } /* for x */ + + } /* for y */ + + /****** gamma correction plus hardcoded white balance */ + /* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code. + Correction values red[], green[], blue[], are generated by + (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255. + White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and + converted to unsigned char. Values are in stv680.h */ + + for (y = 0; y < vh; y++) { + for (x = 0; x < vw; x++) { + i = (y * vw + x) * 3; + *(output + i) = red[*(output + i)]; + *(output + i + 1) = green[*(output + i + 1)]; + *(output + i + 2) = blue[*(output + i + 2)]; + } + } + + /****** bayer demosaic ******/ + for (y = 1; y < (vh - 1); y++) { + for (x = 1; x < (vw - 1); x++) { /* work out pixel type */ + if (y & 1) + bayer = 0; + else + bayer = 2; + if (!(x & 1)) + bayer++; + + switch (bayer) { + case 0: /* green. blue lr, red tb */ + *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1; + *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1; + break; + + case 1: /* blue. green lrtb, red diagonals */ + *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; + *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2; + break; + + case 2: /* red. green lrtb, blue diagonals */ + *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; + *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2; + break; + + case 3: /* green. red lr, blue tb */ + *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1; + *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1; + break; + } /* switch */ + } /* for x */ + } /* for y - end demosaic */ + + /* fix top and bottom row, left and right side */ + i = vw * 3; + memcpy (output, (output + i), i); + memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i); + for (y = 0; y < vh; y++) { + i = y * vw * 3; + memcpy ((output + i), (output + i + 3), 3); + memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3); + } + + /* process all raw data, then trim to size if necessary */ + if ((stv680->vwidth == 160) || (stv680->vwidth == 176)) { + i = 0; + for (y = 0; y < vh; y++) { + if (!(y & 1)) { + for (x = 0; x < vw; x++) { + p = (y * vw + x) * 3; + if (!(x & 1)) { + *(output + i) = *(output + p); + *(output + i + 1) = *(output + p + 1); + *(output + i + 2) = *(output + p + 2); + i += 3; + } + } /* for x */ + } + } /* for y */ + } + /* reset to proper width */ + if ((stv680->vwidth == 160)) { + vw = 160; + vh = 120; + } + if ((stv680->vwidth == 176)) { + vw = 176; + vh = 144; + } + + /* output is RGB; some programs want BGR */ + /* swapRGB_on=0 -> program decides; swapRGB_on=1, always swap */ + /* swapRGB_on=-1, never swap */ + if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) { + for (y = 0; y < vh; y++) { + for (x = 0; x < vw; x++) { + i = (y * vw + x) * 3; + *(temp) = *(output + i); + *(output + i) = *(output + i + 2); + *(output + i + 2) = *(temp); + } + } + } + /* brightness */ + if (stv680->chgbright == 1) { + if (stv680->brightness >= 32767) { + p = (stv680->brightness - 32767) / 256; + for (x = 0; x < (vw * vh * 3); x++) { + if ((*(output + x) + (unsigned char) p) > 255) + *(output + x) = 255; + else + *(output + x) += (unsigned char) p; + } /* for */ + } else { + p = (32767 - stv680->brightness) / 256; + for (x = 0; x < (vw * vh * 3); x++) { + if ((unsigned char) p > *(output + x)) + *(output + x) = 0; + else + *(output + x) -= (unsigned char) p; + } /* for */ + } /* else */ + } + /* if */ + frame->curpix = 0; + frame->curlinepix = 0; + frame->grabstate = FRAME_DONE; + stv680->framecount++; + stv680->readcount++; + if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) { + stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1); + } + +} /* bayer_unshuffle */ + +/******* end routines from the pencam program *********/ + +static int stv680_newframe (struct usb_stv *stv680, int framenr) +{ + int errors = 0; + + while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) { + if (!stv680->frame[framenr].curpix) { + errors++; + } + wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY)); + + if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { + stv680->nullpackets = 0; + PDEBUG (2, "STV(i): too many null length packets, restarting capture"); + stv680_stop_stream (stv680); + stv680_start_stream (stv680); + } else { + if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) { + stv680->frame[framenr].grabstate = FRAME_ERROR; + PDEBUG (2, "STV(e): FRAME_ERROR in _newframe"); + return -EIO; + } + stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY; + + bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]); + + stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED; + stv680->scratch_use++; + if (stv680->scratch_use >= STV680_NUMSCRATCH) + stv680->scratch_use = 0; + if (errors > STV680_MAX_ERRORS) { + errors = 0; + PDEBUG (2, "STV(i): too many errors, restarting capture"); + stv680_stop_stream (stv680); + stv680_start_stream (stv680); + } + } /* else */ + } /* while */ + return 0; +} + +/********************************************************************* + * Video4Linux + *********************************************************************/ + +static int stv_open (struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_stv *stv680 = video_get_drvdata(dev); + int err = 0; + + /* we are called with the BKL held */ + stv680->user = 1; + err = stv_init (stv680); /* main initialization routine for camera */ + + if (err >= 0) { + stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES); + if (!stv680->fbuf) { + PDEBUG (0, "STV(e): Could not rvmalloc frame bufer"); + err = -ENOMEM; + } + file->private_data = dev; + } + if (err) + stv680->user = 0; + + return err; +} + +static int stv_close (struct inode *inode, struct file *file) +{ + struct video_device *dev = file->private_data; + struct usb_stv *stv680 = video_get_drvdata(dev); + int i; + + for (i = 0; i < STV680_NUMFRAMES; i++) + stv680->frame[i].grabstate = FRAME_UNUSED; + if (stv680->streaming) + stv680_stop_stream (stv680); + + if ((i = stv_stop_video (stv680)) < 0) + PDEBUG (1, "STV(e): stop_video failed in stv_close"); + + rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES); + stv680->user = 0; + + if (stv680->removed) { + kfree(stv680); + stv680 = NULL; + PDEBUG (0, "STV(i): device unregistered"); + } + file->private_data = NULL; + return 0; +} + +static int stv680_do_ioctl (struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct usb_stv *stv680 = video_get_drvdata(vdev); + + if (!stv680->udev) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP:{ + struct video_capability *b = arg; + + strcpy (b->name, stv680->camera_name); + b->type = VID_TYPE_CAPTURE; + b->channels = 1; + b->audios = 0; + b->maxwidth = stv680->maxwidth; + b->maxheight = stv680->maxheight; + b->minwidth = stv680->maxwidth / 2; + b->minheight = stv680->maxheight / 2; + return 0; + } + case VIDIOCGCHAN:{ + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + v->flags = 0; + v->tuners = 0; + v->type = VIDEO_TYPE_CAMERA; + strcpy (v->name, "STV Camera"); + return 0; + } + case VIDIOCSCHAN:{ + struct video_channel *v = arg; + if (v->channel != 0) + return -EINVAL; + return 0; + } + case VIDIOCGPICT:{ + struct video_picture *p = arg; + + stv680_get_pict (stv680, p); + return 0; + } + case VIDIOCSPICT:{ + struct video_picture *p = arg; + + if (stv680_set_pict (stv680, p)) + return -EINVAL; + return 0; + } + case VIDIOCSWIN:{ + struct video_window *vw = arg; + + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (vw->width != stv680->vwidth) { + if (stv680_set_size (stv680, vw->width, vw->height)) { + PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN"); + return -EINVAL; + } + } + return 0; + } + case VIDIOCGWIN:{ + struct video_window *vw = arg; + + vw->x = 0; /* FIXME */ + vw->y = 0; + vw->chromakey = 0; + vw->flags = 0; + vw->clipcount = 0; + vw->width = stv680->vwidth; + vw->height = stv680->vheight; + return 0; + } + case VIDIOCGMBUF:{ + struct video_mbuf *vm = arg; + int i; + + memset (vm, 0, sizeof (*vm)); + vm->size = STV680_NUMFRAMES * stv680->maxframesize; + vm->frames = STV680_NUMFRAMES; + for (i = 0; i < STV680_NUMFRAMES; i++) + vm->offsets[i] = stv680->maxframesize * i; + return 0; + } + case VIDIOCMCAPTURE:{ + struct video_mmap *vm = arg; + + if (vm->format != STV_VIDEO_PALETTE) { + PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)", + vm->format, STV_VIDEO_PALETTE); + if ((vm->format == 3) && (swapRGB_on == 0)) { + PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON"); + /* this may fix those apps (e.g., xawtv) that want BGR */ + swapRGB = 1; + } + return -EINVAL; + } + if (vm->frame >= STV680_NUMFRAMES) { + PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES"); + return -EINVAL; + } + if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR) + || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) { + PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error", + stv680->frame[vm->frame].grabstate); + return -EBUSY; + } + /* Is this according to the v4l spec??? */ + if (stv680->vwidth != vm->width) { + if (stv680_set_size (stv680, vm->width, vm->height)) { + PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed"); + return -EINVAL; + } + } + stv680->frame[vm->frame].grabstate = FRAME_READY; + + if (!stv680->streaming) + stv680_start_stream (stv680); + + return 0; + } + case VIDIOCSYNC:{ + int *frame = arg; + int ret = 0; + + if (*frame < 0 || *frame >= STV680_NUMFRAMES) { + PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC"); + return -EINVAL; + } + ret = stv680_newframe (stv680, *frame); + stv680->frame[*frame].grabstate = FRAME_UNUSED; + return ret; + } + case VIDIOCGFBUF:{ + struct video_buffer *vb = arg; + + memset (vb, 0, sizeof (*vb)); + return 0; + } + case VIDIOCKEY: + return 0; + case VIDIOCCAPTURE: + { + PDEBUG (2, "STV(e): VIDIOCCAPTURE failed"); + return -EINVAL; + } + case VIDIOCSFBUF: + case VIDIOCGTUNER: + case VIDIOCSTUNER: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + default: + return -ENOIOCTLCMD; + } /* end switch */ + + return 0; +} + +static int stv680_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, stv680_do_ioctl); +} + +static int stv680_mmap (struct file *file, struct vm_area_struct *vma) +{ + struct video_device *dev = file->private_data; + struct usb_stv *stv680 = video_get_drvdata(dev); + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + mutex_lock(&stv680->lock); + + if (stv680->udev == NULL) { + mutex_unlock(&stv680->lock); + return -EIO; + } + if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1) + & ~(PAGE_SIZE - 1))) { + mutex_unlock(&stv680->lock); + return -EINVAL; + } + pos = (unsigned long) stv680->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&stv680->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + mutex_unlock(&stv680->lock); + + return 0; +} + +static ssize_t stv680_read (struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct video_device *dev = file->private_data; + unsigned long int realcount = count; + int ret = 0; + struct usb_stv *stv680 = video_get_drvdata(dev); + unsigned long int i; + + if (STV680_NUMFRAMES != 2) { + PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!"); + return -1; + } + if (stv680->udev == NULL) + return -EIO; + if (realcount > (stv680->vwidth * stv680->vheight * 3)) + realcount = stv680->vwidth * stv680->vheight * 3; + + /* Shouldn't happen: */ + if (stv680->frame[0].grabstate == FRAME_GRABBING) { + PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read"); + return -EBUSY; + } + stv680->frame[0].grabstate = FRAME_READY; + stv680->frame[1].grabstate = FRAME_UNUSED; + stv680->curframe = 0; + + if (!stv680->streaming) + stv680_start_stream (stv680); + + if (!stv680->streaming) { + ret = stv680_newframe (stv680, 0); /* ret should = 0 */ + } + + ret = stv680_newframe (stv680, 0); + + if (!ret) { + if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) { + PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i); + return -EFAULT; + } + } else { + realcount = ret; + } + stv680->frame[0].grabstate = FRAME_UNUSED; + return realcount; +} /* stv680_read */ + +static struct file_operations stv680_fops = { + .owner = THIS_MODULE, + .open = stv_open, + .release = stv_close, + .read = stv680_read, + .mmap = stv680_mmap, + .ioctl = stv680_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static struct video_device stv680_template = { + .owner = THIS_MODULE, + .name = "STV0680 USB camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_SE401, + .fops = &stv680_fops, + .release = video_device_release, + .minor = -1, +}; + +static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface; + struct usb_stv *stv680 = NULL; + char *camera_name = NULL; + int retval = 0; + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) { + PDEBUG (0, "STV(e): Number of Configurations != 1"); + return -ENODEV; + } + + interface = &intf->altsetting[0]; + /* Is it a STV680? */ + if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) { + camera_name = "STV0680"; + PDEBUG (0, "STV(i): STV0680 camera found."); + } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) { + camera_name = "Creative WebCam Go Mini"; + PDEBUG (0, "STV(i): Creative WebCam Go Mini found."); + } else { + PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values."); + PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer."); + retval = -ENODEV; + goto error; + } + /* We found one */ + if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) { + PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct."); + retval = -ENOMEM; + goto error; + } + + stv680->udev = dev; + stv680->camera_name = camera_name; + + stv680->vdev = video_device_alloc(); + if (!stv680->vdev) { + retval = -ENOMEM; + goto error; + } + memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template)); + stv680->vdev->dev = &intf->dev; + video_set_drvdata(stv680->vdev, stv680); + + memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name)); + init_waitqueue_head (&stv680->wq); + mutex_init (&stv680->lock); + wmb (); + + if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + PDEBUG (0, "STV(e): video_register_device failed"); + retval = -EIO; + goto error_vdev; + } + PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor); + + usb_set_intfdata (intf, stv680); + stv680_create_sysfs_files(stv680->vdev); + return 0; + +error_vdev: + video_device_release(stv680->vdev); +error: + kfree(stv680); + return retval; +} + +static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680) +{ + int i; + + stv680->udev = NULL; + stv680->frame[0].grabstate = FRAME_ERROR; + stv680->frame[1].grabstate = FRAME_ERROR; + stv680->streaming = 0; + + wake_up_interruptible (&stv680->wq); + + for (i = 0; i < STV680_NUMSBUF; i++) + if (stv680->urb[i]) { + usb_kill_urb (stv680->urb[i]); + usb_free_urb (stv680->urb[i]); + stv680->urb[i] = NULL; + kfree(stv680->sbuf[i].data); + } + for (i = 0; i < STV680_NUMSCRATCH; i++) + kfree(stv680->scratch[i].data); + PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name); + + /* Free the memory */ + kfree(stv680); +} + +static void stv680_disconnect (struct usb_interface *intf) +{ + struct usb_stv *stv680 = usb_get_intfdata (intf); + + usb_set_intfdata (intf, NULL); + + if (stv680) { + /* We don't want people trying to open up the device */ + if (stv680->vdev) { + stv680_remove_sysfs_files(stv680->vdev); + video_unregister_device(stv680->vdev); + stv680->vdev = NULL; + } + if (!stv680->user) { + usb_stv680_remove_disconnected (stv680); + } else { + stv680->removed = 1; + } + } +} + +static struct usb_driver stv680_driver = { + .name = "stv680", + .probe = stv680_probe, + .disconnect = stv680_disconnect, + .id_table = device_table +}; + +/******************************************************************** + * Module routines + ********************************************************************/ + +static int __init usb_stv680_init (void) +{ + if (usb_register (&stv680_driver) < 0) { + PDEBUG (0, "STV(e): Could not setup STV0680 driver"); + return -1; + } + PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); + + info(DRIVER_DESC " " DRIVER_VERSION); + return 0; +} + +static void __exit usb_stv680_exit (void) +{ + usb_deregister (&stv680_driver); + PDEBUG (0, "STV(i): driver deregistered"); +} + +module_init (usb_stv680_init); +module_exit (usb_stv680_exit); diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h new file mode 100644 index 00000000000..ea46e0001e6 --- /dev/null +++ b/drivers/media/video/stv680.h @@ -0,0 +1,227 @@ +/**************************************************************************** + * + * Filename: stv680.h + * + * Description: + * This is a USB driver for STV0680 based usb video cameras. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************************/ + +/* size of usb transfers */ +#define STV680_PACKETSIZE 4096 + +/* number of queued bulk transfers to use, may have problems if > 1 */ +#define STV680_NUMSBUF 1 + +/* number of frames supported by the v4l part */ +#define STV680_NUMFRAMES 2 + +/* scratch buffers for passing data to the decoders: 2 or 4 are good */ +#define STV680_NUMSCRATCH 2 + +/* number of nul sized packets to receive before kicking the camera */ +#define STV680_MAX_NULLPACKETS 200 + +/* number of decoding errors before kicking the camera */ +#define STV680_MAX_ERRORS 100 + +#define USB_PENCAM_VENDOR_ID 0x0553 +#define USB_PENCAM_PRODUCT_ID 0x0202 + +#define USB_CREATIVEGOMINI_VENDOR_ID 0x041e +#define USB_CREATIVEGOMINI_PRODUCT_ID 0x4007 + +#define PENCAM_TIMEOUT 1000 +/* fmt 4 */ +#define STV_VIDEO_PALETTE VIDEO_PALETTE_RGB24 + +static struct usb_device_id device_table[] = { + {USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)}, + {USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)}, + {} +}; +MODULE_DEVICE_TABLE (usb, device_table); + +struct stv680_sbuf { + unsigned char *data; +}; + +enum { + FRAME_UNUSED, /* Unused (no MCAPTURE) */ + FRAME_READY, /* Ready to start grabbing */ + FRAME_GRABBING, /* In the process of being grabbed into */ + FRAME_DONE, /* Finished grabbing, but not been synced yet */ + FRAME_ERROR, /* Something bad happened while processing */ +}; + +enum { + BUFFER_UNUSED, + BUFFER_READY, + BUFFER_BUSY, + BUFFER_DONE, +}; + +/* raw camera data <- sbuf (urb transfer buf) */ +struct stv680_scratch { + unsigned char *data; + volatile int state; + int offset; + int length; +}; + +/* processed data for display ends up here, after bayer */ +struct stv680_frame { + unsigned char *data; /* Frame buffer */ + volatile int grabstate; /* State of grabbing */ + unsigned char *curline; + int curlinepix; + int curpix; +}; + +/* this is almost the video structure uvd_t, with extra parameters for stv */ +struct usb_stv { + struct video_device *vdev; + + struct usb_device *udev; + + unsigned char bulk_in_endpointAddr; /* __u8 the address of the bulk in endpoint */ + char *camera_name; + + unsigned int VideoMode; /* 0x0100 = VGA, 0x0000 = CIF, 0x0300 = QVGA */ + int SupportedModes; + int CIF; + int VGA; + int QVGA; + int cwidth; /* camera width */ + int cheight; /* camera height */ + int maxwidth; /* max video width */ + int maxheight; /* max video height */ + int vwidth; /* current width for video window */ + int vheight; /* current height for video window */ + unsigned long int rawbufsize; + unsigned long int maxframesize; /* rawbufsize * 3 for RGB */ + + int origGain; + int origMode; /* original camera mode */ + + struct mutex lock; /* to lock the structure */ + int user; /* user count for exclusive use */ + int removed; /* device disconnected */ + int streaming; /* Are we streaming video? */ + char *fbuf; /* Videodev buffer area */ + struct urb *urb[STV680_NUMSBUF]; /* # of queued bulk transfers */ + int curframe; /* Current receiving frame */ + struct stv680_frame frame[STV680_NUMFRAMES]; /* # frames supported by v4l part */ + int readcount; + int framecount; + int error; + int dropped; + int scratch_next; + int scratch_use; + int scratch_overflow; + struct stv680_scratch scratch[STV680_NUMSCRATCH]; /* for decoders */ + struct stv680_sbuf sbuf[STV680_NUMSBUF]; + + unsigned int brightness; + unsigned int chgbright; + unsigned int whiteness; + unsigned int colour; + unsigned int contrast; + unsigned int hue; + unsigned int palette; + unsigned int depth; /* rgb24 in bits */ + + wait_queue_head_t wq; /* Processes waiting */ + + int nullpackets; +}; + + +static const unsigned char red[256] = { + 0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42, + 44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69, + 71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87, + 88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101, + 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, + 114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124, + 125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134, + 134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143, + 143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151, + 152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159, + 159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166, + 167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173, + 173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179, + 180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186, + 187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192, + 192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197, + 198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204, + 204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209, + 209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215, + 215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219, + 220, 220, 221, 221 +}; + +static const unsigned char green[256] = { + 0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47, + 50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77, + 79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97, + 98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113, + 114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126, + 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, + 139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149, + 150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159, + 160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168, + 169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177, + 177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185, + 186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193, + 193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200, + 201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207, + 208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214, + 214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220, + 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227, + 227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233, + 233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239, + 239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244, + 245, 245, 246, 246 +}; + +static const unsigned char blue[256] = { + 0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51, + 55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84, + 86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106, + 107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124, + 125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138, + 139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151, + 152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163, + 165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174, + 176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184, + 185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194, + 194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203, + 204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212, + 212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220, + 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227, + 228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235, + 235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242, + 243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249, + 249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255 +}; diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile new file mode 100644 index 00000000000..ed410a5ee8c --- /dev/null +++ b/drivers/media/video/usbvideo/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o +obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o +obj-$(CONFIG_USB_VICAM) += vicam.o usbvideo.o + diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c new file mode 100644 index 00000000000..a42c2229412 --- /dev/null +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -0,0 +1,3932 @@ +/* + * USB IBM C-It Video Camera driver + * + * Supports Xirlink C-It Video Camera, IBM PC Camera, + * IBM NetCamera and Veo Stingray. + * + * This driver is based on earlier work of: + * + * (C) Copyright 1999 Johannes Erdfelt + * (C) Copyright 1999 Randy Dunlap + * + * 5/24/00 Removed optional (and unnecessary) locking of the driver while + * the device remains plugged in. Corrected race conditions in ibmcam_open + * and ibmcam_probe() routines using this as a guideline: + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/init.h> + +#include "usbvideo.h" + +#define IBMCAM_VENDOR_ID 0x0545 +#define IBMCAM_PRODUCT_ID 0x8080 +#define NETCAM_PRODUCT_ID 0x8002 /* IBM NetCamera, close to model 2 */ +#define VEO_800C_PRODUCT_ID 0x800C /* Veo Stingray, repackaged Model 2 */ +#define VEO_800D_PRODUCT_ID 0x800D /* Veo Stingray, repackaged Model 4 */ + +#define MAX_IBMCAM 4 /* How many devices we allow to connect */ +#define USES_IBMCAM_PUTPIXEL 0 /* 0=Fast/oops 1=Slow/secure */ + +/* Header signatures */ + +/* Model 1 header: 00 FF 00 xx */ +#define HDRSIG_MODEL1_128x96 0x06 /* U Y V Y ... */ +#define HDRSIG_MODEL1_176x144 0x0e /* U Y V Y ... */ +#define HDRSIG_MODEL1_352x288 0x00 /* V Y U Y ... */ + +#define IBMCAM_MODEL_1 1 /* XVP-501, 3 interfaces, rev. 0.02 */ +#define IBMCAM_MODEL_2 2 /* KSX-X9903, 2 interfaces, rev. 3.0a */ +#define IBMCAM_MODEL_3 3 /* KSX-X9902, 2 interfaces, rev. 3.01 */ +#define IBMCAM_MODEL_4 4 /* IBM NetCamera, 0545/8002/3.0a */ + +/* Video sizes supported */ +#define VIDEOSIZE_128x96 VIDEOSIZE(128, 96) +#define VIDEOSIZE_176x144 VIDEOSIZE(176,144) +#define VIDEOSIZE_352x288 VIDEOSIZE(352,288) +#define VIDEOSIZE_320x240 VIDEOSIZE(320,240) +#define VIDEOSIZE_352x240 VIDEOSIZE(352,240) +#define VIDEOSIZE_640x480 VIDEOSIZE(640,480) +#define VIDEOSIZE_160x120 VIDEOSIZE(160,120) + +/* Video sizes supported */ +enum { + SIZE_128x96 = 0, + SIZE_160x120, + SIZE_176x144, + SIZE_320x240, + SIZE_352x240, + SIZE_352x288, + SIZE_640x480, + /* Add/remove/rearrange items before this line */ + SIZE_LastItem +}; + +/* + * This structure lives in uvd->user field. + */ +typedef struct { + int initialized; /* Had we already sent init sequence? */ + int camera_model; /* What type of IBM camera we got? */ + int has_hdr; +} ibmcam_t; +#define IBMCAM_T(uvd) ((ibmcam_t *)((uvd)->user_data)) + +static struct usbvideo *cams; + +static int debug; + +static int flags; /* = FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */ + +static const int min_canvasWidth = 8; +static const int min_canvasHeight = 4; + +static int lighting = 1; /* Medium */ + +#define SHARPNESS_MIN 0 +#define SHARPNESS_MAX 6 +static int sharpness = 4; /* Low noise, good details */ + +#define FRAMERATE_MIN 0 +#define FRAMERATE_MAX 6 +static int framerate = -1; + +static int size = SIZE_352x288; + +/* + * Here we define several initialization variables. They may + * be used to automatically set color, hue, brightness and + * contrast to desired values. This is particularly useful in + * case of webcams (which have no controls and no on-screen + * output) and also when a client V4L software is used that + * does not have some of those controls. In any case it's + * good to have startup values as options. + * + * These values are all in [0..255] range. This simplifies + * operation. Note that actual values of V4L variables may + * be scaled up (as much as << 8). User can see that only + * on overlay output, however, or through a V4L client. + */ +static int init_brightness = 128; +static int init_contrast = 192; +static int init_color = 128; +static int init_hue = 128; +static int hue_correction = 128; + +/* Settings for camera model 2 */ +static int init_model2_rg2 = -1; +static int init_model2_sat = -1; +static int init_model2_yb = -1; + +/* 01.01.08 - Added for RCA video in support -LO */ +/* Settings for camera model 3 */ +static int init_model3_input = 0; + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); +module_param(flags, int, 0); +MODULE_PARM_DESC(flags, "Bitfield: 0=VIDIOCSYNC, 1=B/W, 2=show hints, 3=show stats, 4=test pattern, 5=separate frames, 6=clean frames"); +module_param(framerate, int, 0); +MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)"); +module_param(lighting, int, 0); +MODULE_PARM_DESC(lighting, "Photosensitivity: 0=bright, 1=medium (default), 2=low light"); +module_param(sharpness, int, 0); +MODULE_PARM_DESC(sharpness, "Model1 noise reduction: 0=smooth, 6=sharp (default=4)"); +module_param(size, int, 0); +MODULE_PARM_DESC(size, "Image size: 0=128x96 1=160x120 2=176x144 3=320x240 4=352x240 5=352x288 6=640x480 (default=5)"); +module_param(init_brightness, int, 0); +MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)"); +module_param(init_contrast, int, 0); +MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)"); +module_param(init_color, int, 0); +MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)"); +module_param(init_hue, int, 0); +MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)"); +module_param(hue_correction, int, 0); +MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)"); + +module_param(init_model2_rg2, int, 0); +MODULE_PARM_DESC(init_model2_rg2, "Model2 preconfiguration: 0-255 (default=47)"); +module_param(init_model2_sat, int, 0); +MODULE_PARM_DESC(init_model2_sat, "Model2 preconfiguration: 0-255 (default=52)"); +module_param(init_model2_yb, int, 0); +MODULE_PARM_DESC(init_model2_yb, "Model2 preconfiguration: 0-255 (default=160)"); + +/* 01.01.08 - Added for RCA video in support -LO */ +module_param(init_model3_input, int, 0); +MODULE_PARM_DESC(init_model3_input, "Model3 input: 0=CCD 1=RCA"); + +MODULE_AUTHOR ("Dmitri"); +MODULE_DESCRIPTION ("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000"); +MODULE_LICENSE("GPL"); + +/* Still mysterious i2c commands */ +static const unsigned short unknown_88 = 0x0088; +static const unsigned short unknown_89 = 0x0089; +static const unsigned short bright_3x[3] = { 0x0031, 0x0032, 0x0033 }; +static const unsigned short contrast_14 = 0x0014; +static const unsigned short light_27 = 0x0027; +static const unsigned short sharp_13 = 0x0013; + +/* i2c commands for Model 2 cameras */ +static const unsigned short mod2_brightness = 0x001a; /* $5b .. $ee; default=$5a */ +static const unsigned short mod2_set_framerate = 0x001c; /* 0 (fast).. $1F (slow) */ +static const unsigned short mod2_color_balance_rg2 = 0x001e; /* 0 (red) .. $7F (green) */ +static const unsigned short mod2_saturation = 0x0020; /* 0 (b/w) - $7F (full color) */ +static const unsigned short mod2_color_balance_yb = 0x0022; /* 0..$7F, $50 is about right */ +static const unsigned short mod2_hue = 0x0024; /* 0..$7F, $70 is about right */ +static const unsigned short mod2_sensitivity = 0x0028; /* 0 (min) .. $1F (max) */ + +struct struct_initData { + unsigned char req; + unsigned short value; + unsigned short index; +}; + +/* + * ibmcam_size_to_videosize() + * + * This procedure converts module option 'size' into the actual + * videosize_t that defines the image size in pixels. We need + * simplified 'size' because user wants a simple enumerated list + * of choices, not an infinite set of possibilities. + */ +static videosize_t ibmcam_size_to_videosize(int size) +{ + videosize_t vs = VIDEOSIZE_352x288; + RESTRICT_TO_RANGE(size, 0, (SIZE_LastItem-1)); + switch (size) { + case SIZE_128x96: + vs = VIDEOSIZE_128x96; + break; + case SIZE_160x120: + vs = VIDEOSIZE_160x120; + break; + case SIZE_176x144: + vs = VIDEOSIZE_176x144; + break; + case SIZE_320x240: + vs = VIDEOSIZE_320x240; + break; + case SIZE_352x240: + vs = VIDEOSIZE_352x240; + break; + case SIZE_352x288: + vs = VIDEOSIZE_352x288; + break; + case SIZE_640x480: + vs = VIDEOSIZE_640x480; + break; + default: + err("size=%d. is not valid", size); + break; + } + return vs; +} + +/* + * ibmcam_find_header() + * + * Locate one of supported header markers in the queue. + * Once found, remove all preceding bytes AND the marker (4 bytes) + * from the data pump queue. Whatever follows must be video lines. + * + * History: + * 1/21/00 Created. + */ +static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */ +{ + struct usbvideo_frame *frame; + ibmcam_t *icam; + + if ((uvd->curframe) < 0 || (uvd->curframe >= USBVIDEO_NUMFRAMES)) { + err("ibmcam_find_header: Illegal frame %d.", uvd->curframe); + return scan_EndParse; + } + icam = IBMCAM_T(uvd); + assert(icam != NULL); + frame = &uvd->frame[uvd->curframe]; + icam->has_hdr = 0; + switch (icam->camera_model) { + case IBMCAM_MODEL_1: + { + const int marker_len = 4; + while (RingQueue_GetLength(&uvd->dp) >= marker_len) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) && + (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00)) + { +#if 0 /* This code helps to detect new frame markers */ + info("Header sig: 00 FF 00 %02X", RING_QUEUE_PEEK(&uvd->dp, 3)); +#endif + frame->header = RING_QUEUE_PEEK(&uvd->dp, 3); + if ((frame->header == HDRSIG_MODEL1_128x96) || + (frame->header == HDRSIG_MODEL1_176x144) || + (frame->header == HDRSIG_MODEL1_352x288)) + { +#if 0 + info("Header found."); +#endif + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); + icam->has_hdr = 1; + break; + } + } + /* If we are still here then this doesn't look like a header */ + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + } + break; + } + case IBMCAM_MODEL_2: +case IBMCAM_MODEL_4: + { + int marker_len = 0; + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + marker_len = 10; + break; + default: + marker_len = 2; + break; + } + while (RingQueue_GetLength(&uvd->dp) >= marker_len) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF)) + { +#if 0 + info("Header found."); +#endif + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); + icam->has_hdr = 1; + frame->header = HDRSIG_MODEL1_176x144; + break; + } + /* If we are still here then this doesn't look like a header */ + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + } + break; + } + case IBMCAM_MODEL_3: + { /* + * Headers: (one precedes every frame). nc=no compression, + * bq=best quality bf=best frame rate. + * + * 176x144: 00 FF 02 { 0A=nc CA=bq EA=bf } + * 320x240: 00 FF 02 { 08=nc 28=bq 68=bf } + * 640x480: 00 FF 03 { 08=nc 28=bq 68=bf } + * + * Bytes '00 FF' seem to indicate header. Other two bytes + * encode the frame type. This is a set of bit fields that + * encode image size, compression type etc. These fields + * do NOT contain frame number because all frames carry + * the same header. + */ + const int marker_len = 4; + while (RingQueue_GetLength(&uvd->dp) >= marker_len) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) && + (RING_QUEUE_PEEK(&uvd->dp, 2) != 0xFF)) + { + /* + * Combine 2 bytes of frame type into one + * easy to use value + */ + unsigned long byte3, byte4; + + byte3 = RING_QUEUE_PEEK(&uvd->dp, 2); + byte4 = RING_QUEUE_PEEK(&uvd->dp, 3); + frame->header = (byte3 << 8) | byte4; +#if 0 + info("Header found."); +#endif + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); + icam->has_hdr = 1; + break; + } + /* If we are still here then this doesn't look like a header */ + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + } + break; + } + default: + break; + } + if (!icam->has_hdr) { + if (uvd->debug > 2) + info("Skipping frame, no header"); + return scan_EndParse; + } + + /* Header found */ + icam->has_hdr = 1; + uvd->stats.header_count++; + frame->scanstate = ScanState_Lines; + frame->curline = 0; + + if (flags & FLAGS_FORCE_TESTPATTERN) { + usbvideo_TestPattern(uvd, 1, 1); + return scan_NextFrame; + } + return scan_Continue; +} + +/* + * ibmcam_parse_lines() + * + * Parse one line (interlaced) from the buffer, put + * decoded RGB value into the current frame buffer + * and add the written number of bytes (RGB) to + * the *pcopylen. + * + * History: + * 21-Jan-2000 Created. + * 12-Oct-2000 Reworked to reflect interlaced nature of the data. + */ +static enum ParseState ibmcam_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + unsigned char *f; + ibmcam_t *icam; + unsigned int len, scanLength, scanHeight, order_uv, order_yc; + int v4l_linesize; /* V4L line offset */ + const int hue_corr = (uvd->vpic.hue - 0x8000) >> 10; /* -32..+31 */ + const int hue2_corr = (hue_correction - 128) / 4; /* -32..+31 */ + const int ccm = 128; /* Color correction median - see below */ + int y, u, v, i, frame_done=0, color_corr; + static unsigned char lineBuffer[640*3]; + unsigned const char *chromaLine, *lumaLine; + + assert(uvd != NULL); + assert(frame != NULL); + icam = IBMCAM_T(uvd); + assert(icam != NULL); + color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ + RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1); + + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + if (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_4) { + /* Model 4 frame markers do not carry image size identification */ + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + case VIDEOSIZE_160x120: + case VIDEOSIZE_176x144: + scanLength = VIDEOSIZE_X(uvd->videosize); + scanHeight = VIDEOSIZE_Y(uvd->videosize); + break; + default: + err("ibmcam_parse_lines: Wrong mode."); + return scan_Out; + } + order_yc = 1; /* order_yc: true=Yc false=cY ('c'=either U or V) */ + order_uv = 1; /* Always true in this algorithm */ + } else { + switch (frame->header) { + case HDRSIG_MODEL1_128x96: + scanLength = 128; + scanHeight = 96; + order_uv = 1; /* U Y V Y ... */ + break; + case HDRSIG_MODEL1_176x144: + scanLength = 176; + scanHeight = 144; + order_uv = 1; /* U Y V Y ... */ + break; + case HDRSIG_MODEL1_352x288: + scanLength = 352; + scanHeight = 288; + order_uv = 0; /* Y V Y V ... */ + break; + default: + err("Unknown header signature 00 FF 00 %02lX", frame->header); + return scan_NextFrame; + } + /* order_yc: true=Yc false=cY ('c'=either U or V) */ + order_yc = (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_2); + } + + len = scanLength * 3; + assert(len <= sizeof(lineBuffer)); + + /* + * Lines are organized this way: + * + * I420: + * ~~~~ + * <scanLength-> + * ___________________________________ + * |-----Y-----|---UVUVUV...UVUV-----| \ + * |-----------+---------------------| \ + * |<-- 176 -->|<------ 176*2 ------>| Total 72. lines (interlaced) + * |... ... | ... | / + * |<-- 352 -->|<------ 352*2 ------>| Total 144. lines (interlaced) + * |___________|_____________________| / + * \ \ + * lumaLine chromaLine + */ + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Mind that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request)) + return scan_NextFrame; + + /* + * Now we are sure that entire line (representing all 'scanLength' + * pixels from the camera) is available in the buffer. We + * start copying the line left-aligned to the V4L buffer. + * If the camera line is shorter then we should pad the V4L + * buffer with something (black) to complete the line. + */ + assert(frame->data != NULL); + f = frame->data + (v4l_linesize * frame->curline); + + /* + * To obtain chrominance data from the 'chromaLine' use this: + * v = chromaLine[0]; // 0-1:[0], 2-3:[4], 4-5:[8]... + * u = chromaLine[2]; // 0-1:[2], 2-3:[6], 4-5:[10]... + * + * Indices must be calculated this way: + * v_index = (i >> 1) << 2; + * u_index = (i >> 1) << 2 + 2; + * + * where 'i' is the column number [0..VIDEOSIZE_X(frame->request)-1] + */ + lumaLine = lineBuffer; + chromaLine = lineBuffer + scanLength; + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) + { + unsigned char rv, gv, bv; /* RGB components */ + + /* Check for various visual debugging hints (colorized pixels) */ + if ((flags & FLAGS_DISPLAY_HINTS) && (icam->has_hdr)) { + /* + * This is bad and should not happen. This means that + * we somehow overshoot the line and encountered new + * frame! Obviously our camera/V4L frame size is out + * of whack. This cyan dot will help you to figure + * out where exactly the new frame arrived. + */ + if (icam->has_hdr == 1) { + bv = 0; /* Yellow marker */ + gv = 0xFF; + rv = 0xFF; + } else { + bv = 0xFF; /* Cyan marker */ + gv = 0xFF; + rv = 0; + } + icam->has_hdr = 0; + goto make_pixel; + } + + /* + * Check if we are still in range. We may be out of range if our + * V4L canvas is wider or taller than the camera "native" image. + * Then we quickly fill the remainder of the line with zeros to + * make black color and quit the horizontal scanning loop. + */ + if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) { + const int j = i * V4L_BYTES_PER_PIXEL; +#if USES_IBMCAM_PUTPIXEL + /* Refresh 'f' because we don't use it much with PUTPIXEL */ + f = frame->data + (v4l_linesize * frame->curline) + j; +#endif + memset(f, 0, v4l_linesize - j); + break; + } + + y = lumaLine[i]; + if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */ + rv = gv = bv = y; + else { + int off_0, off_2; + + off_0 = (i >> 1) << 2; + off_2 = off_0 + 2; + + if (order_yc) { + off_0++; + off_2++; + } + if (!order_uv) { + off_0 += 2; + off_2 -= 2; + } + u = chromaLine[off_0] + hue_corr; + v = chromaLine[off_2] + hue2_corr; + + /* Apply color correction */ + if (color_corr != 0) { + /* Magnify up to 2 times, reduce down to zero saturation */ + u = 128 + ((ccm + color_corr) * (u - 128)) / ccm; + v = 128 + ((ccm + color_corr) * (v - 128)) / ccm; + } + YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv); + } + + make_pixel: + /* + * The purpose of creating the pixel here, in one, + * dedicated place is that we may need to make the + * pixel wider and taller than it actually is. This + * may be used if camera generates small frames for + * sake of frame rate (or any other reason.) + * + * The output data consists of B, G, R bytes + * (in this order). + */ +#if USES_IBMCAM_PUTPIXEL + RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv); +#else + *f++ = bv; + *f++ = gv; + *f++ = rv; +#endif + /* + * Typically we do not decide within a legitimate frame + * that we want to end the frame. However debugging code + * may detect marker of new frame within the data. Then + * this condition activates. The 'data' pointer is already + * pointing at the new marker, so we'd better leave it as is. + */ + if (frame_done) + break; /* End scanning of lines */ + } + /* + * Account for number of bytes that we wrote into output V4L frame. + * We do it here, after we are done with the scanline, because we + * may fill more than one output scanline if we do vertical + * enlargement. + */ + frame->curline += 2; + if (pcopylen != NULL) + *pcopylen += 2 * v4l_linesize; + frame->deinterlace = Deinterlace_FillOddLines; + + if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request))) + return scan_NextFrame; + else + return scan_Continue; +} + +/* + * ibmcam_model2_320x240_parse_lines() + * + * This procedure deals with a weird RGB format that is produced by IBM + * camera model 2 in modes 320x240 and above; 'x' below is 159 or 175, + * depending on horizontal size of the picture: + * + * <--- 160 or 176 pairs of RA,RB bytes -----> + * *-----------------------------------------* \ + * | RA0 | RB0 | RA1 | RB1 | ... | RAx | RBx | \ This is pair of horizontal lines, + * |-----+-----+-----+-----+ ... +-----+-----| *- or one interlaced line, total + * | B0 | G0 | B1 | G1 | ... | Bx | Gx | / 120 or 144 such pairs which yield + * |=====+=====+=====+=====+ ... +=====+=====| / 240 or 288 lines after deinterlacing. + * + * Each group of FOUR bytes (RAi, RBi, Bi, Gi) where i=0..frame_width/2-1 + * defines ONE pixel. Therefore this format yields 176x144 "decoded" + * resolution at best. I do not know why camera sends such format - the + * previous model (1) just used interlaced I420 and everyone was happy. + * + * I do not know what is the difference between RAi and RBi bytes. Both + * seemingly represent R component, but slightly vary in value (so that + * the picture looks a bit colored if one or another is used). I use + * them both as R component in attempt to at least partially recover the + * lost resolution. + */ +static enum ParseState ibmcam_model2_320x240_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + unsigned char *f, *la, *lb; + unsigned int len; + int v4l_linesize; /* V4L line offset */ + int i, j, frame_done=0, color_corr; + int scanLength, scanHeight; + static unsigned char lineBuffer[352*2]; + + switch (uvd->videosize) { + case VIDEOSIZE_320x240: + case VIDEOSIZE_352x240: + case VIDEOSIZE_352x288: + scanLength = VIDEOSIZE_X(uvd->videosize); + scanHeight = VIDEOSIZE_Y(uvd->videosize); + break; + default: + err("ibmcam_model2_320x240_parse_lines: Wrong mode."); + return scan_Out; + } + + color_corr = (uvd->vpic.colour) >> 8; /* 0..+255 */ + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + len = scanLength * 2; /* See explanation above */ + assert(len <= sizeof(lineBuffer)); + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Mind that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request)) + return scan_NextFrame; + + la = lineBuffer; + lb = lineBuffer + scanLength; + + /* + * Now we are sure that entire line (representing all + * VIDEOSIZE_X(frame->request) + * pixels from the camera) is available in the scratch buffer. We + * start copying the line left-aligned to the V4L buffer (which + * might be larger - not smaller, hopefully). If the camera + * line is shorter then we should pad the V4L buffer with something + * (black in this case) to complete the line. + */ + f = frame->data + (v4l_linesize * frame->curline); + + /* Fill the 2-line strip */ + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int y, rv, gv, bv; /* RGB components */ + + j = i & (~1); + + /* Check for various visual debugging hints (colorized pixels) */ + if ((flags & FLAGS_DISPLAY_HINTS) && (IBMCAM_T(uvd)->has_hdr)) { + if (IBMCAM_T(uvd)->has_hdr == 1) { + bv = 0; /* Yellow marker */ + gv = 0xFF; + rv = 0xFF; + } else { + bv = 0xFF; /* Cyan marker */ + gv = 0xFF; + rv = 0; + } + IBMCAM_T(uvd)->has_hdr = 0; + goto make_pixel; + } + + /* + * Check if we are still in range. We may be out of range if our + * V4L canvas is wider or taller than the camera "native" image. + * Then we quickly fill the remainder of the line with zeros to + * make black color and quit the horizontal scanning loop. + */ + if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) { + const int j = i * V4L_BYTES_PER_PIXEL; +#if USES_IBMCAM_PUTPIXEL + /* Refresh 'f' because we don't use it much with PUTPIXEL */ + f = frame->data + (v4l_linesize * frame->curline) + j; +#endif + memset(f, 0, v4l_linesize - j); + break; + } + + /* + * Here I use RA and RB components, one per physical pixel. + * This causes fine vertical grid on the picture but may improve + * horizontal resolution. If you prefer replicating, use this: + * rv = la[j + 0]; ... or ... rv = la[j + 1]; + * then the pixel will be replicated. + */ + rv = la[i]; + gv = lb[j + 1]; + bv = lb[j + 0]; + + y = (rv + gv + bv) / 3; /* Brightness (badly calculated) */ + + if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */ + rv = gv = bv = y; + else if (color_corr != 128) { + + /* Calculate difference between color and brightness */ + rv -= y; + gv -= y; + bv -= y; + + /* Scale differences */ + rv = (rv * color_corr) / 128; + gv = (gv * color_corr) / 128; + bv = (bv * color_corr) / 128; + + /* Reapply brightness */ + rv += y; + gv += y; + bv += y; + + /* Watch for overflows */ + RESTRICT_TO_RANGE(rv, 0, 255); + RESTRICT_TO_RANGE(gv, 0, 255); + RESTRICT_TO_RANGE(bv, 0, 255); + } + + make_pixel: + RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv); + } + /* + * Account for number of bytes that we wrote into output V4L frame. + * We do it here, after we are done with the scanline, because we + * may fill more than one output scanline if we do vertical + * enlargement. + */ + frame->curline += 2; + *pcopylen += v4l_linesize * 2; + frame->deinterlace = Deinterlace_FillOddLines; + + if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request))) + return scan_NextFrame; + else + return scan_Continue; +} + +static enum ParseState ibmcam_model3_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + unsigned char *data; + const unsigned char *color; + unsigned int len; + int v4l_linesize; /* V4L line offset */ + const int hue_corr = (uvd->vpic.hue - 0x8000) >> 10; /* -32..+31 */ + const int hue2_corr = (hue_correction - 128) / 4; /* -32..+31 */ + const int ccm = 128; /* Color correction median - see below */ + int i, u, v, rw, data_w=0, data_h=0, color_corr; + static unsigned char lineBuffer[640*3]; + + color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ + RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1); + + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + /* The header tells us what sort of data is in this frame */ + switch (frame->header) { + /* + * Uncompressed modes (that are easy to decode). + */ + case 0x0308: + data_w = 640; + data_h = 480; + break; + case 0x0208: + data_w = 320; + data_h = 240; + break; + case 0x020A: + data_w = 160; + data_h = 120; + break; + /* + * Compressed modes (ViCE - that I don't know how to decode). + */ + case 0x0328: /* 640x480, best quality compression */ + case 0x0368: /* 640x480, best frame rate compression */ + case 0x0228: /* 320x240, best quality compression */ + case 0x0268: /* 320x240, best frame rate compression */ + case 0x02CA: /* 160x120, best quality compression */ + case 0x02EA: /* 160x120, best frame rate compression */ + /* Do nothing with this - not supported */ + err("Unsupported mode $%04lx", frame->header); + return scan_NextFrame; + default: + /* Catch unknown headers, may help in learning new headers */ + err("Strange frame->header=$%08lx", frame->header); + return scan_NextFrame; + } + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Note that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 1) >= data_h) { + if (uvd->debug >= 3) + info("Reached line %d. (frame is done)", frame->curline); + return scan_NextFrame; + } + + /* Make sure there's enough data for the entire line */ + len = 3 * data_w; /* <y-data> <uv-data> */ + assert(len <= sizeof(lineBuffer)); + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + data = lineBuffer; + color = data + data_w; /* Point to where color planes begin */ + + /* Bottom-to-top scanning */ + rw = (int)VIDEOSIZE_Y(frame->request) - (int)(frame->curline) - 1; + RESTRICT_TO_RANGE(rw, 0, VIDEOSIZE_Y(frame->request)-1); + + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int y, rv, gv, bv; /* RGB components */ + + if (i < data_w) { + y = data[i]; /* Luminosity is the first line */ + + /* Apply static color correction */ + u = color[i*2] + hue_corr; + v = color[i*2 + 1] + hue2_corr; + + /* Apply color correction */ + if (color_corr != 0) { + /* Magnify up to 2 times, reduce down to zero saturation */ + u = 128 + ((ccm + color_corr) * (u - 128)) / ccm; + v = 128 + ((ccm + color_corr) * (v - 128)) / ccm; + } + } else + y = 0, u = v = 128; + + YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv); + RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv); /* Done by deinterlacing now */ + } + frame->deinterlace = Deinterlace_FillEvenLines; + + /* + * Account for number of bytes that we wrote into output V4L frame. + * We do it here, after we are done with the scanline, because we + * may fill more than one output scanline if we do vertical + * enlargement. + */ + frame->curline += 2; + *pcopylen += 2 * v4l_linesize; + + if (frame->curline >= VIDEOSIZE_Y(frame->request)) { + if (uvd->debug >= 3) { + info("All requested lines (%ld.) done.", + VIDEOSIZE_Y(frame->request)); + } + return scan_NextFrame; + } else + return scan_Continue; +} + +/* + * ibmcam_model4_128x96_parse_lines() + * + * This decoder is for one strange data format that is produced by Model 4 + * camera only in 128x96 mode. This is RGB format and here is its description. + * First of all, this is non-interlaced stream, meaning that all scan lines + * are present in the datastream. There are 96 consecutive blocks of data + * that describe all 96 lines of the image. Each block is 5*128 bytes long + * and carries R, G, B components. The format of the block is shown in the + * code below. First 128*2 bytes are interleaved R and G components. Then + * we have a gap (junk data) 64 bytes long. Then follow B and something + * else, also interleaved (this makes another 128*2 bytes). After that + * probably another 64 bytes of junk follow. + * + * History: + * 10-Feb-2001 Created. + */ +static enum ParseState ibmcam_model4_128x96_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + const unsigned char *data_rv, *data_gv, *data_bv; + unsigned int len; + int i, v4l_linesize; /* V4L line offset */ + const int data_w=128, data_h=96; + static unsigned char lineBuffer[128*5]; + + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Note that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 1) >= data_h) { + if (uvd->debug >= 3) + info("Reached line %d. (frame is done)", frame->curline); + return scan_NextFrame; + } + + /* + * RGRGRG .... RGRG_____________B?B?B? ... B?B?____________ + * <---- 128*2 ---><---- 64 ---><--- 128*2 ---><--- 64 ---> + */ + + /* Make sure there's enough data for the entire line */ + len = 5 * data_w; + assert(len <= sizeof(lineBuffer)); + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + data_rv = lineBuffer; + data_gv = lineBuffer + 1; + data_bv = lineBuffer + data_w*2 + data_w/2; + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int rv, gv, bv; /* RGB components */ + if (i < data_w) { + const int j = i * 2; + gv = data_rv[j]; + rv = data_gv[j]; + bv = data_bv[j]; + if (flags & FLAGS_MONOCHROME) { + unsigned long y; + y = rv + gv + bv; + y /= 3; + if (y > 0xFF) + y = 0xFF; + rv = gv = bv = (unsigned char) y; + } + } else { + rv = gv = bv = 0; + } + RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv); + } + frame->deinterlace = Deinterlace_None; + frame->curline++; + *pcopylen += v4l_linesize; + + if (frame->curline >= VIDEOSIZE_Y(frame->request)) { + if (uvd->debug >= 3) { + info("All requested lines (%ld.) done.", + VIDEOSIZE_Y(frame->request)); + } + return scan_NextFrame; + } else + return scan_Continue; +} + +/* + * ibmcam_ProcessIsocData() + * + * Generic routine to parse the ring queue data. It employs either + * ibmcam_find_header() or ibmcam_parse_lines() to do most + * of work. + * + * History: + * 1/21/00 Created. + */ +static void ibmcam_ProcessIsocData(struct uvd *uvd, + struct usbvideo_frame *frame) +{ + enum ParseState newstate; + long copylen = 0; + int mod = IBMCAM_T(uvd)->camera_model; + + while (1) { + newstate = scan_Out; + if (RingQueue_GetLength(&uvd->dp) > 0) { + if (frame->scanstate == ScanState_Scanning) { + newstate = ibmcam_find_header(uvd); + } else if (frame->scanstate == ScanState_Lines) { + if ((mod == IBMCAM_MODEL_2) && + ((uvd->videosize == VIDEOSIZE_352x288) || + (uvd->videosize == VIDEOSIZE_320x240) || + (uvd->videosize == VIDEOSIZE_352x240))) + { + newstate = ibmcam_model2_320x240_parse_lines( + uvd, frame, ©len); + } else if (mod == IBMCAM_MODEL_4) { + /* + * Model 4 cameras (IBM NetCamera) use Model 2 decoder (RGB) + * for 320x240 and above; 160x120 and 176x144 uses Model 1 + * decoder (YUV), and 128x96 mode uses ??? + */ + if ((uvd->videosize == VIDEOSIZE_352x288) || + (uvd->videosize == VIDEOSIZE_320x240) || + (uvd->videosize == VIDEOSIZE_352x240)) + { + newstate = ibmcam_model2_320x240_parse_lines(uvd, frame, ©len); + } else if (uvd->videosize == VIDEOSIZE_128x96) { + newstate = ibmcam_model4_128x96_parse_lines(uvd, frame, ©len); + } else { + newstate = ibmcam_parse_lines(uvd, frame, ©len); + } + } else if (mod == IBMCAM_MODEL_3) { + newstate = ibmcam_model3_parse_lines(uvd, frame, ©len); + } else { + newstate = ibmcam_parse_lines(uvd, frame, ©len); + } + } + } + if (newstate == scan_Continue) + continue; + else if ((newstate == scan_NextFrame) || (newstate == scan_Out)) + break; + else + return; /* scan_EndParse */ + } + + if (newstate == scan_NextFrame) { + frame->frameState = FrameState_Done; + uvd->curframe = -1; + uvd->stats.frame_num++; + if ((mod == IBMCAM_MODEL_2) || (mod == IBMCAM_MODEL_4)) { + /* Need software contrast adjustment for those cameras */ + frame->flags |= USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST; + } + } + + /* Update the frame's uncompressed length. */ + frame->seqRead_Length += copylen; + +#if 0 + { + static unsigned char j=0; + memset(frame->data, j++, uvd->max_frame_size); + frame->frameState = FrameState_Ready; + } +#endif +} + +/* + * ibmcam_veio() + * + * History: + * 1/27/00 Added check for dev == NULL; this happens if camera is unplugged. + */ +static int ibmcam_veio( + struct uvd *uvd, + unsigned char req, + unsigned short value, + unsigned short index) +{ + static const char proc[] = "ibmcam_veio"; + unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */; + int i; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return 0; + + if (req == 1) { + i = usb_control_msg( + uvd->dev, + usb_rcvctrlpipe(uvd->dev, 0), + req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + value, + index, + cp, + sizeof(cp), + 1000); +#if 0 + info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); +#endif + } else { + i = usb_control_msg( + uvd->dev, + usb_sndctrlpipe(uvd->dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + value, + index, + NULL, + 0, + 1000); + } + if (i < 0) { + err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.", + proc, i); + uvd->last_error = i; + } + return i; +} + +/* + * ibmcam_calculate_fps() + * + * This procedure roughly calculates the real frame rate based + * on FPS code (framerate=NNN option). Actual FPS differs + * slightly depending on lighting conditions, so that actual frame + * rate is determined by the camera. Since I don't know how to ask + * the camera what FPS is now I have to use the FPS code instead. + * + * The FPS code is in range [0..6], 0 is slowest, 6 is fastest. + * Corresponding real FPS should be in range [3..30] frames per second. + * The conversion formula is obvious: + * + * real_fps = 3 + (fps_code * 4.5) + * + * History: + * 1/18/00 Created. + */ +static int ibmcam_calculate_fps(struct uvd *uvd) +{ + return 3 + framerate*4 + framerate/2; +} + +/* + * ibmcam_send_FF_04_02() + * + * This procedure sends magic 3-command prefix to the camera. + * The purpose of this prefix is not known. + * + * History: + * 1/2/00 Created. + */ +static void ibmcam_send_FF_04_02(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x00FF, 0x0127); + ibmcam_veio(uvd, 0, 0x0004, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); +} + +static void ibmcam_send_00_04_06(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x0004, 0x0124); + ibmcam_veio(uvd, 0, 0x0006, 0x0124); +} + +static void ibmcam_send_x_00(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); +} + +static void ibmcam_send_x_00_05(struct uvd *uvd, unsigned short x) +{ + ibmcam_send_x_00(uvd, x); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); +} + +static void ibmcam_send_x_00_05_02(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); +} + +static void ibmcam_send_x_01_00_05(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0001, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); +} + +static void ibmcam_send_x_00_05_02_01(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0124); +} + +static void ibmcam_send_x_00_05_02_08_01(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0124); +} + +static void ibmcam_Packet_Format1(struct uvd *uvd, unsigned char fkey, unsigned char val) +{ + ibmcam_send_x_01_00_05(uvd, unknown_88); + ibmcam_send_x_00_05(uvd, fkey); + ibmcam_send_x_00_05_02_08_01(uvd, val); + ibmcam_send_x_00_05(uvd, unknown_88); + ibmcam_send_x_00_05_02_01(uvd, fkey); + ibmcam_send_x_00_05(uvd, unknown_89); + ibmcam_send_x_00(uvd, fkey); + ibmcam_send_00_04_06(uvd); + ibmcam_veio(uvd, 1, 0x0000, 0x0126); + ibmcam_send_FF_04_02(uvd); +} + +static void ibmcam_PacketFormat2(struct uvd *uvd, unsigned char fkey, unsigned char val) +{ + ibmcam_send_x_01_00_05 (uvd, unknown_88); + ibmcam_send_x_00_05 (uvd, fkey); + ibmcam_send_x_00_05_02 (uvd, val); +} + +static void ibmcam_model2_Packet2(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x00ff, 0x012d); + ibmcam_veio(uvd, 0, 0xfea3, 0x0124); +} + +static void ibmcam_model2_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2) +{ + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x00ff, 0x012e); + ibmcam_veio(uvd, 0, v1, 0x012f); + ibmcam_veio(uvd, 0, 0x00ff, 0x0130); + ibmcam_veio(uvd, 0, 0xc719, 0x0124); + ibmcam_veio(uvd, 0, v2, 0x0127); + + ibmcam_model2_Packet2(uvd); +} + +/* + * ibmcam_model3_Packet1() + * + * 00_0078_012d + * 00_0097_012f + * 00_d141_0124 + * 00_0096_0127 + * 00_fea8_0124 +*/ +static void ibmcam_model3_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2) +{ + ibmcam_veio(uvd, 0, 0x0078, 0x012d); + ibmcam_veio(uvd, 0, v1, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, v2, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); +} + +static void ibmcam_model4_BrightnessPacket(struct uvd *uvd, int i) +{ + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0026, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, i, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0038, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); +} + +/* + * ibmcam_adjust_contrast() + * + * The contrast value changes from 0 (high contrast) to 15 (low contrast). + * This is in reverse to usual order of things (such as TV controls), so + * we reverse it again here. + * + * TODO: we probably don't need to send the setup 5 times... + * + * History: + * 1/2/00 Created. + */ +static void ibmcam_adjust_contrast(struct uvd *uvd) +{ + unsigned char a_contrast = uvd->vpic.contrast >> 12; + unsigned char new_contrast; + + if (a_contrast >= 16) + a_contrast = 15; + new_contrast = 15 - a_contrast; + if (new_contrast == uvd->vpic_old.contrast) + return; + uvd->vpic_old.contrast = new_contrast; + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + const int ntries = 5; + int i; + for (i=0; i < ntries; i++) { + ibmcam_Packet_Format1(uvd, contrast_14, new_contrast); + ibmcam_send_FF_04_02(uvd); + } + break; + } + case IBMCAM_MODEL_2: + case IBMCAM_MODEL_4: + /* Models 2, 4 do not have this control; implemented in software. */ + break; + case IBMCAM_MODEL_3: + { /* Preset hardware values */ + static const struct { + unsigned short cv1; + unsigned short cv2; + unsigned short cv3; + } cv[7] = { + { 0x05, 0x05, 0x0f }, /* Minimum */ + { 0x04, 0x04, 0x16 }, + { 0x02, 0x03, 0x16 }, + { 0x02, 0x08, 0x16 }, + { 0x01, 0x0c, 0x16 }, + { 0x01, 0x0e, 0x16 }, + { 0x01, 0x10, 0x16 } /* Maximum */ + }; + int i = a_contrast / 2; + RESTRICT_TO_RANGE(i, 0, 6); + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x0067, cv[i].cv1); + ibmcam_model3_Packet1(uvd, 0x005b, cv[i].cv2); + ibmcam_model3_Packet1(uvd, 0x005c, cv[i].cv3); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + break; + } + default: + break; + } +} + +/* + * ibmcam_change_lighting_conditions() + * + * Camera model 1: + * We have 3 levels of lighting conditions: 0=Bright, 1=Medium, 2=Low. + * + * Camera model 2: + * We have 16 levels of lighting, 0 for bright light and up to 15 for + * low light. But values above 5 or so are useless because camera is + * not really capable to produce anything worth viewing at such light. + * This setting may be altered only in certain camera state. + * + * Low lighting forces slower FPS. Lighting is set as a module parameter. + * + * History: + * 1/5/00 Created. + * 2/20/00 Added support for Model 2 cameras. + */ +static void ibmcam_change_lighting_conditions(struct uvd *uvd) +{ + static const char proc[] = "ibmcam_change_lighting_conditions"; + + if (debug > 0) + info("%s: Set lighting to %hu.", proc, lighting); + + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + const int ntries = 5; + int i; + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, light_27, (unsigned short) lighting); + break; + } + case IBMCAM_MODEL_2: +#if 0 + /* + * This command apparently requires camera to be stopped. My + * experiments showed that it -is- possible to alter the lighting + * conditions setting "on the fly", but why bother? This setting does + * not work reliably in all cases, so I decided simply to leave the + * setting where Xirlink put it - in the camera setup phase. This code + * is commented out because it does not work at -any- moment, so its + * presence makes no sense. You may use it for experiments. + */ + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop camera */ + ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Start camera */ +#endif + break; + case IBMCAM_MODEL_3: + case IBMCAM_MODEL_4: + default: + break; + } +} + +/* + * ibmcam_set_sharpness() + * + * Cameras model 1 have internal smoothing feature. It is controlled by value in + * range [0..6], where 0 is most smooth and 6 is most sharp (raw image, I guess). + * Recommended value is 4. Cameras model 2 do not have this feature at all. + */ +static void ibmcam_set_sharpness(struct uvd *uvd) +{ + static const char proc[] = "ibmcam_set_sharpness"; + + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + static const unsigned short sa[] = { 0x11, 0x13, 0x16, 0x18, 0x1a, 0x8, 0x0a }; + unsigned short i, sv; + + RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX); + if (debug > 0) + info("%s: Set sharpness to %hu.", proc, sharpness); + + sv = sa[sharpness - SHARPNESS_MIN]; + for (i=0; i < 2; i++) { + ibmcam_send_x_01_00_05 (uvd, unknown_88); + ibmcam_send_x_00_05 (uvd, sharp_13); + ibmcam_send_x_00_05_02 (uvd, sv); + } + break; + } + case IBMCAM_MODEL_2: + case IBMCAM_MODEL_4: + /* Models 2, 4 do not have this control */ + break; + case IBMCAM_MODEL_3: + { /* + * "Use a table of magic numbers. + * This setting doesn't really change much. + * But that's how Windows does it." + */ + static const struct { + unsigned short sv1; + unsigned short sv2; + unsigned short sv3; + unsigned short sv4; + } sv[7] = { + { 0x00, 0x00, 0x05, 0x14 }, /* Smoothest */ + { 0x01, 0x04, 0x05, 0x14 }, + { 0x02, 0x04, 0x05, 0x14 }, + { 0x03, 0x04, 0x05, 0x14 }, + { 0x03, 0x05, 0x05, 0x14 }, + { 0x03, 0x06, 0x05, 0x14 }, + { 0x03, 0x07, 0x05, 0x14 } /* Sharpest */ + }; + RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX); + RESTRICT_TO_RANGE(sharpness, 0, 6); + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x0060, sv[sharpness].sv1); + ibmcam_model3_Packet1(uvd, 0x0061, sv[sharpness].sv2); + ibmcam_model3_Packet1(uvd, 0x0062, sv[sharpness].sv3); + ibmcam_model3_Packet1(uvd, 0x0063, sv[sharpness].sv4); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_veio(uvd, 0, 0x0001, 0x0113); + break; + } + default: + break; + } +} + +/* + * ibmcam_set_brightness() + * + * This procedure changes brightness of the picture. + */ +static void ibmcam_set_brightness(struct uvd *uvd) +{ + static const char proc[] = "ibmcam_set_brightness"; + static const unsigned short n = 1; + + if (debug > 0) + info("%s: Set brightness to %hu.", proc, uvd->vpic.brightness); + + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + unsigned short i, j, bv[3]; + bv[0] = bv[1] = bv[2] = uvd->vpic.brightness >> 10; + if (bv[0] == (uvd->vpic_old.brightness >> 10)) + return; + uvd->vpic_old.brightness = bv[0]; + for (j=0; j < 3; j++) + for (i=0; i < n; i++) + ibmcam_Packet_Format1(uvd, bright_3x[j], bv[j]); + break; + } + case IBMCAM_MODEL_2: + { + unsigned short i, j; + i = uvd->vpic.brightness >> 12; /* 0 .. 15 */ + j = 0x60 + i * ((0xee - 0x60) / 16); /* 0x60 .. 0xee or so */ + if (uvd->vpic_old.brightness == j) + break; + uvd->vpic_old.brightness = j; + ibmcam_model2_Packet1(uvd, mod2_brightness, j); + break; + } + case IBMCAM_MODEL_3: + { + /* Model 3: Brightness range 'i' in [0x0C..0x3F] */ + unsigned short i = + 0x0C + (uvd->vpic.brightness / (0xFFFF / (0x3F - 0x0C + 1))); + RESTRICT_TO_RANGE(i, 0x0C, 0x3F); + if (uvd->vpic_old.brightness == i) + break; + uvd->vpic_old.brightness = i; + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x0036, i); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_veio(uvd, 0, 0x0001, 0x0113); + break; + } + case IBMCAM_MODEL_4: + { + /* Model 4: Brightness range 'i' in [0x04..0xb4] */ + unsigned short i = 0x04 + (uvd->vpic.brightness / (0xFFFF / (0xb4 - 0x04 + 1))); + RESTRICT_TO_RANGE(i, 0x04, 0xb4); + if (uvd->vpic_old.brightness == i) + break; + uvd->vpic_old.brightness = i; + ibmcam_model4_BrightnessPacket(uvd, i); + break; + } + default: + break; + } +} + +static void ibmcam_set_hue(struct uvd *uvd) +{ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_2: + { + unsigned short hue = uvd->vpic.hue >> 9; /* 0 .. 7F */ + if (uvd->vpic_old.hue == hue) + return; + uvd->vpic_old.hue = hue; + ibmcam_model2_Packet1(uvd, mod2_hue, hue); + /* ibmcam_model2_Packet1(uvd, mod2_saturation, sat); */ + break; + } + case IBMCAM_MODEL_3: + { +#if 0 /* This seems not to work. No problem, will fix programmatically */ + unsigned short hue = 0x05 + (uvd->vpic.hue / (0xFFFF / (0x37 - 0x05 + 1))); + RESTRICT_TO_RANGE(hue, 0x05, 0x37); + if (uvd->vpic_old.hue == hue) + return; + uvd->vpic_old.hue = hue; + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x007e, hue); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_veio(uvd, 0, 0x0001, 0x0113); +#endif + break; + } + case IBMCAM_MODEL_4: + { + unsigned short r_gain, g_gain, b_gain, hue; + + /* + * I am not sure r/g/b_gain variables exactly control gain + * of those channels. Most likely they subtly change some + * very internal image processing settings in the camera. + * In any case, here is what they do, and feel free to tweak: + * + * r_gain: seriously affects red gain + * g_gain: seriously affects green gain + * b_gain: seriously affects blue gain + * hue: changes average color from violet (0) to red (0xFF) + * + * These settings are preset for a decent white balance in + * 320x240, 352x288 modes. Low-res modes exhibit higher contrast + * and therefore may need different values here. + */ + hue = 20 + (uvd->vpic.hue >> 9); + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + r_gain = 90; + g_gain = 166; + b_gain = 175; + break; + case VIDEOSIZE_160x120: + r_gain = 70; + g_gain = 166; + b_gain = 185; + break; + case VIDEOSIZE_176x144: + r_gain = 160; + g_gain = 175; + b_gain = 185; + break; + default: + r_gain = 120; + g_gain = 166; + b_gain = 175; + break; + } + RESTRICT_TO_RANGE(hue, 1, 0x7f); + + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, g_gain, 0x0127); /* Green gain */ + ibmcam_veio(uvd, 0, r_gain, 0x012e); /* Red gain */ + ibmcam_veio(uvd, 0, b_gain, 0x0130); /* Blue gain */ + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, hue, 0x012d); /* Hue */ + ibmcam_veio(uvd, 0, 0xf545, 0x0124); + break; + } + default: + break; + } +} + +/* + * ibmcam_adjust_picture() + * + * This procedure gets called from V4L interface to update picture settings. + * Here we change brightness and contrast. + */ +static void ibmcam_adjust_picture(struct uvd *uvd) +{ + ibmcam_adjust_contrast(uvd); + ibmcam_set_brightness(uvd); + ibmcam_set_hue(uvd); +} + +static int ibmcam_model1_setup(struct uvd *uvd) +{ + const int ntries = 5; + int i; + + ibmcam_veio(uvd, 1, 0x00, 0x0128); + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x01, 0x0100); /* LED On */ + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x81, 0x0100); /* LED Off */ + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x01, 0x0100); /* LED On */ + ibmcam_veio(uvd, 0, 0x01, 0x0108); + + ibmcam_veio(uvd, 0, 0x03, 0x0112); + ibmcam_veio(uvd, 1, 0x00, 0x0115); + ibmcam_veio(uvd, 0, 0x06, 0x0115); + ibmcam_veio(uvd, 1, 0x00, 0x0116); + ibmcam_veio(uvd, 0, 0x44, 0x0116); + ibmcam_veio(uvd, 1, 0x00, 0x0116); + ibmcam_veio(uvd, 0, 0x40, 0x0116); + ibmcam_veio(uvd, 1, 0x00, 0x0115); + ibmcam_veio(uvd, 0, 0x0e, 0x0115); + ibmcam_veio(uvd, 0, 0x19, 0x012c); + + ibmcam_Packet_Format1(uvd, 0x00, 0x1e); + ibmcam_Packet_Format1(uvd, 0x39, 0x0d); + ibmcam_Packet_Format1(uvd, 0x39, 0x09); + ibmcam_Packet_Format1(uvd, 0x3b, 0x00); + ibmcam_Packet_Format1(uvd, 0x28, 0x22); + ibmcam_Packet_Format1(uvd, light_27, 0); + ibmcam_Packet_Format1(uvd, 0x2b, 0x1f); + ibmcam_Packet_Format1(uvd, 0x39, 0x08); + + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x2c, 0x00); + + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x30, 0x14); + + ibmcam_PacketFormat2(uvd, 0x39, 0x02); + ibmcam_PacketFormat2(uvd, 0x01, 0xe1); + ibmcam_PacketFormat2(uvd, 0x02, 0xcd); + ibmcam_PacketFormat2(uvd, 0x03, 0xcd); + ibmcam_PacketFormat2(uvd, 0x04, 0xfa); + ibmcam_PacketFormat2(uvd, 0x3f, 0xff); + ibmcam_PacketFormat2(uvd, 0x39, 0x00); + + ibmcam_PacketFormat2(uvd, 0x39, 0x02); + ibmcam_PacketFormat2(uvd, 0x0a, 0x37); + ibmcam_PacketFormat2(uvd, 0x0b, 0xb8); + ibmcam_PacketFormat2(uvd, 0x0c, 0xf3); + ibmcam_PacketFormat2(uvd, 0x0d, 0xe3); + ibmcam_PacketFormat2(uvd, 0x0e, 0x0d); + ibmcam_PacketFormat2(uvd, 0x0f, 0xf2); + ibmcam_PacketFormat2(uvd, 0x10, 0xd5); + ibmcam_PacketFormat2(uvd, 0x11, 0xba); + ibmcam_PacketFormat2(uvd, 0x12, 0x53); + ibmcam_PacketFormat2(uvd, 0x3f, 0xff); + ibmcam_PacketFormat2(uvd, 0x39, 0x00); + + ibmcam_PacketFormat2(uvd, 0x39, 0x02); + ibmcam_PacketFormat2(uvd, 0x16, 0x00); + ibmcam_PacketFormat2(uvd, 0x17, 0x28); + ibmcam_PacketFormat2(uvd, 0x18, 0x7d); + ibmcam_PacketFormat2(uvd, 0x19, 0xbe); + ibmcam_PacketFormat2(uvd, 0x3f, 0xff); + ibmcam_PacketFormat2(uvd, 0x39, 0x00); + + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x00, 0x18); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x13, 0x18); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x14, 0x06); + + /* This is default brightness */ + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x31, 0x37); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x32, 0x46); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x33, 0x55); + + ibmcam_Packet_Format1(uvd, 0x2e, 0x04); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x2d, 0x04); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x29, 0x80); + ibmcam_Packet_Format1(uvd, 0x2c, 0x01); + ibmcam_Packet_Format1(uvd, 0x30, 0x17); + ibmcam_Packet_Format1(uvd, 0x39, 0x08); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x34, 0x00); + + ibmcam_veio(uvd, 0, 0x00, 0x0101); + ibmcam_veio(uvd, 0, 0x00, 0x010a); + + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + ibmcam_veio(uvd, 0, 0x80, 0x0103); + ibmcam_veio(uvd, 0, 0x60, 0x0105); + ibmcam_veio(uvd, 0, 0x0c, 0x010b); + ibmcam_veio(uvd, 0, 0x04, 0x011b); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x0b, 0x011d); + ibmcam_veio(uvd, 0, 0x00, 0x011e); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x00, 0x0129); + break; + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0xb0, 0x0103); + ibmcam_veio(uvd, 0, 0x8f, 0x0105); + ibmcam_veio(uvd, 0, 0x06, 0x010b); + ibmcam_veio(uvd, 0, 0x04, 0x011b); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x0d, 0x011d); + ibmcam_veio(uvd, 0, 0x00, 0x011e); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x03, 0x0129); + break; + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0xb0, 0x0103); + ibmcam_veio(uvd, 0, 0x90, 0x0105); + ibmcam_veio(uvd, 0, 0x02, 0x010b); + ibmcam_veio(uvd, 0, 0x04, 0x011b); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x05, 0x011d); + ibmcam_veio(uvd, 0, 0x00, 0x011e); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x00, 0x0129); + break; + } + + ibmcam_veio(uvd, 0, 0xff, 0x012b); + + /* This is another brightness - don't know why */ + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x31, 0xc3); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x32, 0xd2); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x33, 0xe1); + + /* Default contrast */ + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, contrast_14, 0x0a); + + /* Default sharpness */ + for (i=0; i < 2; i++) + ibmcam_PacketFormat2(uvd, sharp_13, 0x1a); /* Level 4 FIXME */ + + /* Default lighting conditions */ + ibmcam_Packet_Format1(uvd, light_27, lighting); /* 0=Bright 2=Low */ + + /* Assorted init */ + + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + ibmcam_Packet_Format1(uvd, 0x2b, 0x1e); + ibmcam_veio(uvd, 0, 0xc9, 0x0119); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x80, 0x0109); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x36, 0x0102); + ibmcam_veio(uvd, 0, 0x1a, 0x0104); + ibmcam_veio(uvd, 0, 0x04, 0x011a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x2b, 0x011c); + ibmcam_veio(uvd, 0, 0x23, 0x012a); /* Same everywhere */ +#if 0 + ibmcam_veio(uvd, 0, 0x00, 0x0106); + ibmcam_veio(uvd, 0, 0x38, 0x0107); +#else + ibmcam_veio(uvd, 0, 0x02, 0x0106); + ibmcam_veio(uvd, 0, 0x2a, 0x0107); +#endif + break; + case VIDEOSIZE_176x144: + ibmcam_Packet_Format1(uvd, 0x2b, 0x1e); + ibmcam_veio(uvd, 0, 0xc9, 0x0119); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x80, 0x0109); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x04, 0x0102); + ibmcam_veio(uvd, 0, 0x02, 0x0104); + ibmcam_veio(uvd, 0, 0x04, 0x011a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x2b, 0x011c); + ibmcam_veio(uvd, 0, 0x23, 0x012a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x01, 0x0106); + ibmcam_veio(uvd, 0, 0xca, 0x0107); + break; + case VIDEOSIZE_352x288: + ibmcam_Packet_Format1(uvd, 0x2b, 0x1f); + ibmcam_veio(uvd, 0, 0xc9, 0x0119); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x80, 0x0109); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x08, 0x0102); + ibmcam_veio(uvd, 0, 0x01, 0x0104); + ibmcam_veio(uvd, 0, 0x04, 0x011a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x2f, 0x011c); + ibmcam_veio(uvd, 0, 0x23, 0x012a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x03, 0x0106); + ibmcam_veio(uvd, 0, 0xf6, 0x0107); + break; + } + return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT); +} + +static int ibmcam_model2_setup(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x0000, 0x0100); /* LED on */ + ibmcam_veio(uvd, 1, 0x0000, 0x0116); + ibmcam_veio(uvd, 0, 0x0060, 0x0116); + ibmcam_veio(uvd, 0, 0x0002, 0x0112); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0008, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0x002c, 0x0103); /* All except 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x0024, 0x0105); /* 176x144, 352x288 */ + ibmcam_veio(uvd, 0, 0x00b9, 0x010a); /* Unique to this mode */ + ibmcam_veio(uvd, 0, 0x0038, 0x0119); /* Unique to this mode */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x0090, 0x0107); /* Unique to every mode*/ + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0028, 0x0103); /* Unique to this mode */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x001e, 0x0105); /* 320x240, 352x240 */ + ibmcam_veio(uvd, 0, 0x0039, 0x010a); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0070, 0x0119); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x0098, 0x0107); /* Unique to every mode*/ + break; + case VIDEOSIZE_352x240: + ibmcam_veio(uvd, 0, 0x002c, 0x0103); /* All except 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x001e, 0x0105); /* 320x240, 352x240 */ + ibmcam_veio(uvd, 0, 0x0039, 0x010a); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0070, 0x0119); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x00da, 0x0107); /* Unique to every mode*/ + break; + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0x002c, 0x0103); /* All except 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x0024, 0x0105); /* 176x144, 352x288 */ + ibmcam_veio(uvd, 0, 0x0039, 0x010a); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0070, 0x0119); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x00fe, 0x0107); /* Unique to every mode*/ + break; + } + return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT); +} + +/* + * ibmcam_model1_setup_after_video_if() + * + * This code adds finishing touches to the video data interface. + * Here we configure the frame rate and turn on the LED. + */ +static void ibmcam_model1_setup_after_video_if(struct uvd *uvd) +{ + unsigned short internal_frame_rate; + + RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX); + internal_frame_rate = FRAMERATE_MAX - framerate; /* 0=Fast 6=Slow */ + ibmcam_veio(uvd, 0, 0x01, 0x0100); /* LED On */ + ibmcam_veio(uvd, 0, internal_frame_rate, 0x0111); + ibmcam_veio(uvd, 0, 0x01, 0x0114); + ibmcam_veio(uvd, 0, 0xc0, 0x010c); +} + +static void ibmcam_model2_setup_after_video_if(struct uvd *uvd) +{ + unsigned short setup_model2_rg2, setup_model2_sat, setup_model2_yb; + + ibmcam_veio(uvd, 0, 0x0000, 0x0100); /* LED on */ + + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0x0050, 0x0111); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + break; + case VIDEOSIZE_320x240: + case VIDEOSIZE_352x240: + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0x0040, 0x0111); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + break; + } + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + + /* + * Hardware settings, may affect CMOS sensor; not user controls! + * ------------------------------------------------------------- + * 0x0004: no effect + * 0x0006: hardware effect + * 0x0008: no effect + * 0x000a: stops video stream, probably important h/w setting + * 0x000c: changes color in hardware manner (not user setting) + * 0x0012: changes number of colors (does not affect speed) + * 0x002a: no effect + * 0x002c: hardware setting (related to scan lines) + * 0x002e: stops video stream, probably important h/w setting + */ + ibmcam_model2_Packet1(uvd, 0x000a, 0x005c); + ibmcam_model2_Packet1(uvd, 0x0004, 0x0000); + ibmcam_model2_Packet1(uvd, 0x0006, 0x00fb); + ibmcam_model2_Packet1(uvd, 0x0008, 0x0000); + ibmcam_model2_Packet1(uvd, 0x000c, 0x0009); + ibmcam_model2_Packet1(uvd, 0x0012, 0x000a); + ibmcam_model2_Packet1(uvd, 0x002a, 0x0000); + ibmcam_model2_Packet1(uvd, 0x002c, 0x0000); + ibmcam_model2_Packet1(uvd, 0x002e, 0x0008); + + /* + * Function 0x0030 pops up all over the place. Apparently + * it is a hardware control register, with every bit assigned to + * do something. + */ + ibmcam_model2_Packet1(uvd, 0x0030, 0x0000); + + /* + * Magic control of CMOS sensor. Only lower values like + * 0-3 work, and picture shifts left or right. Don't change. + */ + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_model2_Packet1(uvd, 0x0014, 0x0002); + ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */ + break; + case VIDEOSIZE_320x240: + ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); + ibmcam_model2_Packet1(uvd, 0x0016, 0x0005); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Another hardware setting */ + break; + case VIDEOSIZE_352x240: + /* This mode doesn't work as Windows programs it; changed to work */ + ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); /* Windows sets this to 8 */ + ibmcam_model2_Packet1(uvd, 0x0016, 0x0003); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Windows sets this to 0x0045 */ + break; + case VIDEOSIZE_352x288: + ibmcam_model2_Packet1(uvd, 0x0014, 0x0003); + ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */ + break; + } + + ibmcam_model2_Packet1(uvd, mod2_brightness, 0x005a); + + /* + * We have our own frame rate setting varying from 0 (slowest) to 6 (fastest). + * The camera model 2 allows frame rate in range [0..0x1F] where 0 is also the + * slowest setting. However for all practical reasons high settings make no + * sense because USB is not fast enough to support high FPS. Be aware that + * the picture datastream will be severely disrupted if you ask for + * frame rate faster than allowed for the video size - see below: + * + * Allowable ranges (obtained experimentally on OHCI, K6-3, 450 MHz): + * ----------------------------------------------------------------- + * 176x144: [6..31] + * 320x240: [8..31] + * 352x240: [10..31] + * 352x288: [16..31] I have to raise lower threshold for stability... + * + * As usual, slower FPS provides better sensitivity. + */ + { + short hw_fps=31, i_framerate; + + RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX); + i_framerate = FRAMERATE_MAX - framerate + FRAMERATE_MIN; + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + hw_fps = 6 + i_framerate*4; + break; + case VIDEOSIZE_320x240: + hw_fps = 8 + i_framerate*3; + break; + case VIDEOSIZE_352x240: + hw_fps = 10 + i_framerate*2; + break; + case VIDEOSIZE_352x288: + hw_fps = 28 + i_framerate/2; + break; + } + if (uvd->debug > 0) + info("Framerate (hardware): %hd.", hw_fps); + RESTRICT_TO_RANGE(hw_fps, 0, 31); + ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps); + } + + /* + * This setting does not visibly affect pictures; left it here + * because it was present in Windows USB data stream. This function + * does not allow arbitrary values and apparently is a bit mask, to + * be activated only at appropriate time. Don't change it randomly! + */ + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_model2_Packet1(uvd, 0x0026, 0x00c2); + break; + case VIDEOSIZE_320x240: + ibmcam_model2_Packet1(uvd, 0x0026, 0x0044); + break; + case VIDEOSIZE_352x240: + ibmcam_model2_Packet1(uvd, 0x0026, 0x0046); + break; + case VIDEOSIZE_352x288: + ibmcam_model2_Packet1(uvd, 0x0026, 0x0048); + break; + } + + ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting); + + if (init_model2_rg2 >= 0) { + RESTRICT_TO_RANGE(init_model2_rg2, 0, 255); + setup_model2_rg2 = init_model2_rg2; + } else + setup_model2_rg2 = 0x002f; + + if (init_model2_sat >= 0) { + RESTRICT_TO_RANGE(init_model2_sat, 0, 255); + setup_model2_sat = init_model2_sat; + } else + setup_model2_sat = 0x0034; + + if (init_model2_yb >= 0) { + RESTRICT_TO_RANGE(init_model2_yb, 0, 255); + setup_model2_yb = init_model2_yb; + } else + setup_model2_yb = 0x00a0; + + ibmcam_model2_Packet1(uvd, mod2_color_balance_rg2, setup_model2_rg2); + ibmcam_model2_Packet1(uvd, mod2_saturation, setup_model2_sat); + ibmcam_model2_Packet1(uvd, mod2_color_balance_yb, setup_model2_yb); + ibmcam_model2_Packet1(uvd, mod2_hue, uvd->vpic.hue >> 9); /* 0 .. 7F */; + + /* Hardware control command */ + ibmcam_model2_Packet1(uvd, 0x0030, 0x0004); + + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go camera, go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); +} + +static void ibmcam_model4_setup_after_video_if(struct uvd *uvd) +{ + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0070, 0x0119); + ibmcam_veio(uvd, 0, 0x00d2, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x005e, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x0039, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x0028, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x001e, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x000a, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005a, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0043, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00eb, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x0031, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x012d); + ibmcam_veio(uvd, 0, 0x0078, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_160x120: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0038, 0x0119); + ibmcam_veio(uvd, 0, 0x00d8, 0x0107); + ibmcam_veio(uvd, 0, 0x0002, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x00b9, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x0028, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x001e, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x000b, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005a, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0043, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00c7, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0025, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0048, 0x0127); + ibmcam_veio(uvd, 0, 0x0035, 0x012e); + ibmcam_veio(uvd, 0, 0x00d0, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0048, 0x012d); + ibmcam_veio(uvd, 0, 0x0090, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0038, 0x0119); + ibmcam_veio(uvd, 0, 0x00d6, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x0018, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x00b9, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x002c, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x0024, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0007, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0001, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005e, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0049, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00c7, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0028, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x002a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x012d); + ibmcam_veio(uvd, 0, 0x006d, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0070, 0x0119); + ibmcam_veio(uvd, 0, 0x00d2, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x005e, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x0039, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x0028, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x001e, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x000a, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005a, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0043, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00eb, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x0031, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x012d); + ibmcam_veio(uvd, 0, 0x0078, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0070, 0x0119); + ibmcam_veio(uvd, 0, 0x00f2, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x008c, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x0039, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x002c, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x0024, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0006, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0002, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005e, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0049, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00cf, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x0025, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x012d); + ibmcam_veio(uvd, 0, 0x0048, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + } + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); +} + +static void ibmcam_model3_setup_after_video_if(struct uvd *uvd) +{ + int i; + /* + * 01.01.08 - Added for RCA video in support -LO + * This struct is used to init the Model3 cam to use the RCA video in port + * instead of the CCD sensor. + */ + static const struct struct_initData initData[] = { + {0, 0x0000, 0x010c}, + {0, 0x0006, 0x012c}, + {0, 0x0078, 0x012d}, + {0, 0x0046, 0x012f}, + {0, 0xd141, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfea8, 0x0124}, + {1, 0x0000, 0x0116}, + {0, 0x0064, 0x0116}, + {1, 0x0000, 0x0115}, + {0, 0x0003, 0x0115}, + {0, 0x0008, 0x0123}, + {0, 0x0000, 0x0117}, + {0, 0x0000, 0x0112}, + {0, 0x0080, 0x0100}, + {0, 0x0000, 0x0100}, + {1, 0x0000, 0x0116}, + {0, 0x0060, 0x0116}, + {0, 0x0002, 0x0112}, + {0, 0x0000, 0x0123}, + {0, 0x0001, 0x0117}, + {0, 0x0040, 0x0108}, + {0, 0x0019, 0x012c}, + {0, 0x0040, 0x0116}, + {0, 0x000a, 0x0115}, + {0, 0x000b, 0x0115}, + {0, 0x0078, 0x012d}, + {0, 0x0046, 0x012f}, + {0, 0xd141, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfea8, 0x0124}, + {0, 0x0064, 0x0116}, + {0, 0x0000, 0x0115}, + {0, 0x0001, 0x0115}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00aa, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f2, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x000f, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f8, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00fc, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f9, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x003c, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0027, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0019, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0021, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0006, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0045, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002a, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x000e, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002b, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f4, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002c, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0004, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002d, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0014, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002e, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0003, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002f, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0003, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0014, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0053, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0x0000, 0x0101}, + {0, 0x00a0, 0x0103}, + {0, 0x0078, 0x0105}, + {0, 0x0000, 0x010a}, + {0, 0x0024, 0x010b}, + {0, 0x0028, 0x0119}, + {0, 0x0088, 0x011b}, + {0, 0x0002, 0x011d}, + {0, 0x0003, 0x011e}, + {0, 0x0000, 0x0129}, + {0, 0x00fc, 0x012b}, + {0, 0x0008, 0x0102}, + {0, 0x0000, 0x0104}, + {0, 0x0008, 0x011a}, + {0, 0x0028, 0x011c}, + {0, 0x0021, 0x012a}, + {0, 0x0000, 0x0118}, + {0, 0x0000, 0x0132}, + {0, 0x0000, 0x0109}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0031, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00dc, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0032, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0020, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0030, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0008, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0x0003, 0x0106}, + {0, 0x0062, 0x0107}, + {0, 0x0003, 0x0111}, + }; +#define NUM_INIT_DATA + + unsigned short compression = 0; /* 0=none, 7=best frame rate */ + int f_rate; /* 0=Fastest 7=slowest */ + + if (IBMCAM_T(uvd)->initialized) + return; + + /* Internal frame rate is controlled by f_rate value */ + f_rate = 7 - framerate; + RESTRICT_TO_RANGE(f_rate, 0, 7); + + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 1, 0x0000, 0x0116); + ibmcam_veio(uvd, 0, 0x0060, 0x0116); + ibmcam_veio(uvd, 0, 0x0002, 0x0112); + ibmcam_veio(uvd, 0, 0x0000, 0x0123); + ibmcam_veio(uvd, 0, 0x0001, 0x0117); + ibmcam_veio(uvd, 0, 0x0040, 0x0108); + ibmcam_veio(uvd, 0, 0x0019, 0x012c); + ibmcam_veio(uvd, 0, 0x0060, 0x0116); + ibmcam_veio(uvd, 0, 0x0002, 0x0115); + ibmcam_veio(uvd, 0, 0x0003, 0x0115); + ibmcam_veio(uvd, 1, 0x0000, 0x0115); + ibmcam_veio(uvd, 0, 0x000b, 0x0115); + ibmcam_model3_Packet1(uvd, 0x000a, 0x0040); + ibmcam_model3_Packet1(uvd, 0x000b, 0x00f6); + ibmcam_model3_Packet1(uvd, 0x000c, 0x0002); + ibmcam_model3_Packet1(uvd, 0x000d, 0x0020); + ibmcam_model3_Packet1(uvd, 0x000e, 0x0033); + ibmcam_model3_Packet1(uvd, 0x000f, 0x0007); + ibmcam_model3_Packet1(uvd, 0x0010, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0011, 0x0070); + ibmcam_model3_Packet1(uvd, 0x0012, 0x0030); + ibmcam_model3_Packet1(uvd, 0x0013, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0014, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0015, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0016, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0017, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0018, 0x0000); + ibmcam_model3_Packet1(uvd, 0x001e, 0x00c3); + ibmcam_model3_Packet1(uvd, 0x0020, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0028, 0x0010); + ibmcam_model3_Packet1(uvd, 0x0029, 0x0054); + ibmcam_model3_Packet1(uvd, 0x002a, 0x0013); + ibmcam_model3_Packet1(uvd, 0x002b, 0x0007); + ibmcam_model3_Packet1(uvd, 0x002d, 0x0028); + ibmcam_model3_Packet1(uvd, 0x002e, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0031, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0032, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0033, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0034, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0035, 0x0038); + ibmcam_model3_Packet1(uvd, 0x003a, 0x0001); + ibmcam_model3_Packet1(uvd, 0x003c, 0x001e); + ibmcam_model3_Packet1(uvd, 0x003f, 0x000a); + ibmcam_model3_Packet1(uvd, 0x0041, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0046, 0x003f); + ibmcam_model3_Packet1(uvd, 0x0047, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0050, 0x0005); + ibmcam_model3_Packet1(uvd, 0x0052, 0x001a); + ibmcam_model3_Packet1(uvd, 0x0053, 0x0003); + ibmcam_model3_Packet1(uvd, 0x005a, 0x006b); + ibmcam_model3_Packet1(uvd, 0x005d, 0x001e); + ibmcam_model3_Packet1(uvd, 0x005e, 0x0030); + ibmcam_model3_Packet1(uvd, 0x005f, 0x0041); + ibmcam_model3_Packet1(uvd, 0x0064, 0x0008); + ibmcam_model3_Packet1(uvd, 0x0065, 0x0015); + ibmcam_model3_Packet1(uvd, 0x0068, 0x000f); + ibmcam_model3_Packet1(uvd, 0x0079, 0x0000); + ibmcam_model3_Packet1(uvd, 0x007a, 0x0000); + ibmcam_model3_Packet1(uvd, 0x007c, 0x003f); + ibmcam_model3_Packet1(uvd, 0x0082, 0x000f); + ibmcam_model3_Packet1(uvd, 0x0085, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0099, 0x0000); + ibmcam_model3_Packet1(uvd, 0x009b, 0x0023); + ibmcam_model3_Packet1(uvd, 0x009c, 0x0022); + ibmcam_model3_Packet1(uvd, 0x009d, 0x0096); + ibmcam_model3_Packet1(uvd, 0x009e, 0x0096); + ibmcam_model3_Packet1(uvd, 0x009f, 0x000a); + + switch (uvd->videosize) { + case VIDEOSIZE_160x120: + ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */ + ibmcam_veio(uvd, 0, 0x0024, 0x010b); /* Differs everywhere */ + ibmcam_veio(uvd, 0, 0x00a9, 0x0119); + ibmcam_veio(uvd, 0, 0x0016, 0x011b); + ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */ + ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */ + ibmcam_veio(uvd, 0, 0x0018, 0x0102); + ibmcam_veio(uvd, 0, 0x0004, 0x0104); + ibmcam_veio(uvd, 0, 0x0004, 0x011a); + ibmcam_veio(uvd, 0, 0x0028, 0x011c); + ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */ + ibmcam_veio(uvd, 0, 0x0000, 0x0118); + ibmcam_veio(uvd, 0, 0x0000, 0x0132); + ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */ + ibmcam_veio(uvd, 0, compression, 0x0109); + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */ + ibmcam_veio(uvd, 0, 0x0028, 0x010b); /* Differs everywhere */ + ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same */ + ibmcam_veio(uvd, 0, 0x0000, 0x011e); + ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */ + ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */ + /* 4 commands from 160x120 skipped */ + ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */ + ibmcam_veio(uvd, 0, compression, 0x0109); + ibmcam_veio(uvd, 0, 0x00d9, 0x0119); + ibmcam_veio(uvd, 0, 0x0006, 0x011b); + ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0010, 0x0104); + ibmcam_veio(uvd, 0, 0x0004, 0x011a); + ibmcam_veio(uvd, 0, 0x003f, 0x011c); + ibmcam_veio(uvd, 0, 0x001c, 0x0118); + ibmcam_veio(uvd, 0, 0x0000, 0x0132); + break; + case VIDEOSIZE_640x480: + ibmcam_veio(uvd, 0, 0x00f0, 0x0105); + ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */ + ibmcam_veio(uvd, 0, 0x0038, 0x010b); /* Differs everywhere */ + ibmcam_veio(uvd, 0, 0x00d9, 0x0119); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0006, 0x011b); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0004, 0x011d); /* NC */ + ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */ + ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */ + ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0016, 0x0104); /* NC */ + ibmcam_veio(uvd, 0, 0x0004, 0x011a); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x003f, 0x011c); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */ + ibmcam_veio(uvd, 0, 0x001c, 0x0118); /* Same on 320x240, 640x480 */ + ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */ + ibmcam_veio(uvd, 0, compression, 0x0109); + ibmcam_veio(uvd, 0, 0x0040, 0x0101); + ibmcam_veio(uvd, 0, 0x0040, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0132); /* Same on 320x240, 640x480 */ + break; + } + ibmcam_model3_Packet1(uvd, 0x007e, 0x000e); /* Hue */ + ibmcam_model3_Packet1(uvd, 0x0036, 0x0011); /* Brightness */ + ibmcam_model3_Packet1(uvd, 0x0060, 0x0002); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0061, 0x0004); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0062, 0x0005); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0063, 0x0014); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0); /* Red gain */ + ibmcam_model3_Packet1(uvd, 0x0097, 0x0096); /* Blue gain */ + ibmcam_model3_Packet1(uvd, 0x0067, 0x0001); /* Contrast */ + ibmcam_model3_Packet1(uvd, 0x005b, 0x000c); /* Contrast */ + ibmcam_model3_Packet1(uvd, 0x005c, 0x0016); /* Contrast */ + ibmcam_model3_Packet1(uvd, 0x0098, 0x000b); + ibmcam_model3_Packet1(uvd, 0x002c, 0x0003); /* Was 1, broke 640x480 */ + ibmcam_model3_Packet1(uvd, 0x002f, 0x002a); + ibmcam_model3_Packet1(uvd, 0x0030, 0x0029); + ibmcam_model3_Packet1(uvd, 0x0037, 0x0002); + ibmcam_model3_Packet1(uvd, 0x0038, 0x0059); + ibmcam_model3_Packet1(uvd, 0x003d, 0x002e); + ibmcam_model3_Packet1(uvd, 0x003e, 0x0028); + ibmcam_model3_Packet1(uvd, 0x0078, 0x0005); + ibmcam_model3_Packet1(uvd, 0x007b, 0x0011); + ibmcam_model3_Packet1(uvd, 0x007d, 0x004b); + ibmcam_model3_Packet1(uvd, 0x007f, 0x0022); + ibmcam_model3_Packet1(uvd, 0x0080, 0x000c); + ibmcam_model3_Packet1(uvd, 0x0081, 0x000b); + ibmcam_model3_Packet1(uvd, 0x0083, 0x00fd); + ibmcam_model3_Packet1(uvd, 0x0086, 0x000b); + ibmcam_model3_Packet1(uvd, 0x0087, 0x000b); + ibmcam_model3_Packet1(uvd, 0x007e, 0x000e); + ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0); /* Red gain */ + ibmcam_model3_Packet1(uvd, 0x0097, 0x0096); /* Blue gain */ + ibmcam_model3_Packet1(uvd, 0x0098, 0x000b); + + switch (uvd->videosize) { + case VIDEOSIZE_160x120: + ibmcam_veio(uvd, 0, 0x0002, 0x0106); + ibmcam_veio(uvd, 0, 0x0008, 0x0107); + ibmcam_veio(uvd, 0, f_rate, 0x0111); /* Frame rate */ + ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */ + ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0040, 0x000a); + ibmcam_model3_Packet1(uvd, 0x0051, 0x000a); + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x0062, 0x0107); + ibmcam_veio(uvd, 0, f_rate, 0x0111); /* Frame rate */ + ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */ + ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0040, 0x0008); + ibmcam_model3_Packet1(uvd, 0x0051, 0x000b); + break; + case VIDEOSIZE_640x480: + ibmcam_veio(uvd, 0, 0x0002, 0x0106); /* Adjustments */ + ibmcam_veio(uvd, 0, 0x00b4, 0x0107); /* Adjustments */ + ibmcam_veio(uvd, 0, f_rate, 0x0111); /* Frame rate */ + ibmcam_model3_Packet1(uvd, 0x001f, 0x0002); /* !Same */ + ibmcam_model3_Packet1(uvd, 0x0039, 0x003e); /* !Same */ + ibmcam_model3_Packet1(uvd, 0x0040, 0x0008); + ibmcam_model3_Packet1(uvd, 0x0051, 0x000a); + break; + } + + /* 01.01.08 - Added for RCA video in support -LO */ + if(init_model3_input) { + if (debug > 0) + info("Setting input to RCA."); + for (i=0; i < ARRAY_SIZE(initData); i++) { + ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index); + } + } + + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); +} + +/* + * ibmcam_video_stop() + * + * This code tells camera to stop streaming. The interface remains + * configured and bandwidth - claimed. + */ +static void ibmcam_video_stop(struct uvd *uvd) +{ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + ibmcam_veio(uvd, 0, 0x00, 0x010c); + ibmcam_veio(uvd, 0, 0x00, 0x010c); + ibmcam_veio(uvd, 0, 0x01, 0x0114); + ibmcam_veio(uvd, 0, 0xc0, 0x010c); + ibmcam_veio(uvd, 0, 0x00, 0x010c); + ibmcam_send_FF_04_02(uvd); + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x81, 0x0100); /* LED Off */ + break; + case IBMCAM_MODEL_2: +case IBMCAM_MODEL_4: + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop the camera */ + + ibmcam_model2_Packet1(uvd, 0x0030, 0x0004); + + ibmcam_veio(uvd, 0, 0x0080, 0x0100); /* LED Off */ + ibmcam_veio(uvd, 0, 0x0020, 0x0111); + ibmcam_veio(uvd, 0, 0x00a0, 0x0111); + + ibmcam_model2_Packet1(uvd, 0x0030, 0x0002); + + ibmcam_veio(uvd, 0, 0x0020, 0x0111); + ibmcam_veio(uvd, 0, 0x0000, 0x0112); + break; + case IBMCAM_MODEL_3: +#if 1 + ibmcam_veio(uvd, 0, 0x0000, 0x010c); + + /* Here we are supposed to select video interface alt. setting 0 */ + ibmcam_veio(uvd, 0, 0x0006, 0x012c); + + ibmcam_model3_Packet1(uvd, 0x0046, 0x0000); + + ibmcam_veio(uvd, 1, 0x0000, 0x0116); + ibmcam_veio(uvd, 0, 0x0064, 0x0116); + ibmcam_veio(uvd, 1, 0x0000, 0x0115); + ibmcam_veio(uvd, 0, 0x0003, 0x0115); + ibmcam_veio(uvd, 0, 0x0008, 0x0123); + ibmcam_veio(uvd, 0, 0x0000, 0x0117); + ibmcam_veio(uvd, 0, 0x0000, 0x0112); + ibmcam_veio(uvd, 0, 0x0080, 0x0100); + IBMCAM_T(uvd)->initialized = 0; +#endif + break; + } /* switch */ +} + +/* + * ibmcam_reinit_iso() + * + * This procedure sends couple of commands to the camera and then + * resets the video pipe. This sequence was observed to reinit the + * camera or, at least, to initiate ISO data stream. + * + * History: + * 1/2/00 Created. + */ +static void ibmcam_reinit_iso(struct uvd *uvd, int do_stop) +{ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + if (do_stop) + ibmcam_video_stop(uvd); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_model1_setup_after_video_if(uvd); + break; + case IBMCAM_MODEL_2: + ibmcam_model2_setup_after_video_if(uvd); + break; + case IBMCAM_MODEL_3: + ibmcam_video_stop(uvd); + ibmcam_model3_setup_after_video_if(uvd); + break; + case IBMCAM_MODEL_4: + ibmcam_model4_setup_after_video_if(uvd); + break; + } +} + +static void ibmcam_video_start(struct uvd *uvd) +{ + ibmcam_change_lighting_conditions(uvd); + ibmcam_set_sharpness(uvd); + ibmcam_reinit_iso(uvd, 0); +} + +/* + * Return negative code on failure, 0 on success. + */ +static int ibmcam_setup_on_open(struct uvd *uvd) +{ + int setup_ok = 0; /* Success by default */ + /* Send init sequence only once, it's large! */ + if (!IBMCAM_T(uvd)->initialized) { /* FIXME rename */ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + setup_ok = ibmcam_model1_setup(uvd); + break; + case IBMCAM_MODEL_2: + setup_ok = ibmcam_model2_setup(uvd); + break; + case IBMCAM_MODEL_3: + case IBMCAM_MODEL_4: + /* We do all setup when Isoc stream is requested */ + break; + } + IBMCAM_T(uvd)->initialized = (setup_ok != 0); + } + return setup_ok; +} + +static void ibmcam_configure_video(struct uvd *uvd) +{ + if (uvd == NULL) + return; + + RESTRICT_TO_RANGE(init_brightness, 0, 255); + RESTRICT_TO_RANGE(init_contrast, 0, 255); + RESTRICT_TO_RANGE(init_color, 0, 255); + RESTRICT_TO_RANGE(init_hue, 0, 255); + RESTRICT_TO_RANGE(hue_correction, 0, 255); + + memset(&uvd->vpic, 0, sizeof(uvd->vpic)); + memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); + + uvd->vpic.colour = init_color << 8; + uvd->vpic.hue = init_hue << 8; + uvd->vpic.brightness = init_brightness << 8; + uvd->vpic.contrast = init_contrast << 8; + uvd->vpic.whiteness = 105 << 8; /* This one isn't used */ + uvd->vpic.depth = 24; + uvd->vpic.palette = VIDEO_PALETTE_RGB24; + + memset(&uvd->vcap, 0, sizeof(uvd->vcap)); + strcpy(uvd->vcap.name, "IBM USB Camera"); + uvd->vcap.type = VID_TYPE_CAPTURE; + uvd->vcap.channels = 1; + uvd->vcap.audios = 0; + uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas); + uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas); + uvd->vcap.minwidth = min_canvasWidth; + uvd->vcap.minheight = min_canvasHeight; + + memset(&uvd->vchan, 0, sizeof(uvd->vchan)); + uvd->vchan.flags = 0; + uvd->vchan.tuners = 0; + uvd->vchan.channel = 0; + uvd->vchan.type = VIDEO_TYPE_CAMERA; + strcpy(uvd->vchan.name, "Camera"); +} + +/* + * ibmcam_probe() + * + * This procedure queries device descriptor and accepts the interface + * if it looks like IBM C-it camera. + * + * History: + * 22-Jan-2000 Moved camera init code to ibmcam_open() + * 27=Jan-2000 Changed to use static structures, added locking. + * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT). + * 03-Jul-2000 Fixed endianness bug. + * 12-Nov-2000 Reworked to comply with new probe() signature. + * 23-Jan-2001 Added compatibility with 2.2.x kernels. + */ +static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct uvd *uvd = NULL; + int ix, i, nas, model=0, canvasX=0, canvasY=0; + int actInterface=-1, inactInterface=-1, maxPS=0; + __u8 ifnum = intf->altsetting->desc.bInterfaceNumber; + unsigned char video_ep = 0; + + if (debug >= 1) + info("ibmcam_probe(%p,%u.)", intf, ifnum); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + /* Check the version/revision */ + switch (le16_to_cpu(dev->descriptor.bcdDevice)) { + case 0x0002: + if (ifnum != 2) + return -ENODEV; + model = IBMCAM_MODEL_1; + break; + case 0x030A: + if (ifnum != 0) + return -ENODEV; + if ((le16_to_cpu(dev->descriptor.idProduct) == NETCAM_PRODUCT_ID) || + (le16_to_cpu(dev->descriptor.idProduct) == VEO_800D_PRODUCT_ID)) + model = IBMCAM_MODEL_4; + else + model = IBMCAM_MODEL_2; + break; + case 0x0301: + if (ifnum != 0) + return -ENODEV; + model = IBMCAM_MODEL_3; + break; + default: + err("IBM camera with revision 0x%04x is not supported.", + le16_to_cpu(dev->descriptor.bcdDevice)); + return -ENODEV; + } + + /* Print detailed info on what we found so far */ + do { + char *brand = NULL; + switch (le16_to_cpu(dev->descriptor.idProduct)) { + case NETCAM_PRODUCT_ID: + brand = "IBM NetCamera"; + break; + case VEO_800C_PRODUCT_ID: + brand = "Veo Stingray [800C]"; + break; + case VEO_800D_PRODUCT_ID: + brand = "Veo Stingray [800D]"; + break; + case IBMCAM_PRODUCT_ID: + default: + brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ + break; + } + info("%s USB camera found (model %d, rev. 0x%04x)", + brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); + } while (0); + + /* Validate found interface: must have one ISO endpoint */ + nas = intf->num_altsetting; + if (debug > 0) + info("Number of alternate settings=%d.", nas); + if (nas < 2) { + err("Too few alternate settings for this camera!"); + return -ENODEV; + } + /* Validate all alternate settings */ + for (ix=0; ix < nas; ix++) { + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + + interface = &intf->altsetting[ix]; + i = interface->desc.bAlternateSetting; + if (interface->desc.bNumEndpoints != 1) { + err("Interface %d. has %u. endpoints!", + ifnum, (unsigned)(interface->desc.bNumEndpoints)); + return -ENODEV; + } + endpoint = &interface->endpoint[0].desc; + if (video_ep == 0) + video_ep = endpoint->bEndpointAddress; + else if (video_ep != endpoint->bEndpointAddress) { + err("Alternate settings have different endpoint addresses!"); + return -ENODEV; + } + if ((endpoint->bmAttributes & 0x03) != 0x01) { + err("Interface %d. has non-ISO endpoint!", ifnum); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & 0x80) == 0) { + err("Interface %d. has ISO OUT endpoint!", ifnum); + return -ENODEV; + } + if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { + if (inactInterface < 0) + inactInterface = i; + else { + err("More than one inactive alt. setting!"); + return -ENODEV; + } + } else { + if (actInterface < 0) { + actInterface = i; + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + if (debug > 0) + info("Active setting=%d. maxPS=%d.", i, maxPS); + } else + err("More than one active alt. setting! Ignoring #%d.", i); + } + } + if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) { + err("Failed to recognize the camera!"); + return -ENODEV; + } + + /* Validate options */ + switch (model) { + case IBMCAM_MODEL_1: + RESTRICT_TO_RANGE(lighting, 0, 2); + RESTRICT_TO_RANGE(size, SIZE_128x96, SIZE_352x288); + if (framerate < 0) + framerate = 2; + canvasX = 352; + canvasY = 288; + break; + case IBMCAM_MODEL_2: + RESTRICT_TO_RANGE(lighting, 0, 15); + RESTRICT_TO_RANGE(size, SIZE_176x144, SIZE_352x240); + if (framerate < 0) + framerate = 2; + canvasX = 352; + canvasY = 240; + break; + case IBMCAM_MODEL_3: + RESTRICT_TO_RANGE(lighting, 0, 15); /* FIXME */ + switch (size) { + case SIZE_160x120: + canvasX = 160; + canvasY = 120; + if (framerate < 0) + framerate = 2; + RESTRICT_TO_RANGE(framerate, 0, 5); + break; + default: + info("IBM camera: using 320x240"); + size = SIZE_320x240; + /* No break here */ + case SIZE_320x240: + canvasX = 320; + canvasY = 240; + if (framerate < 0) + framerate = 3; + RESTRICT_TO_RANGE(framerate, 0, 5); + break; + case SIZE_640x480: + canvasX = 640; + canvasY = 480; + framerate = 0; /* Slowest, and maybe even that is too fast */ + break; + } + break; + case IBMCAM_MODEL_4: + RESTRICT_TO_RANGE(lighting, 0, 2); + switch (size) { + case SIZE_128x96: + canvasX = 128; + canvasY = 96; + break; + case SIZE_160x120: + canvasX = 160; + canvasY = 120; + break; + default: + info("IBM NetCamera: using 176x144"); + size = SIZE_176x144; + /* No break here */ + case SIZE_176x144: + canvasX = 176; + canvasY = 144; + break; + case SIZE_320x240: + canvasX = 320; + canvasY = 240; + break; + case SIZE_352x288: + canvasX = 352; + canvasY = 288; + break; + } + break; + default: + err("IBM camera: Model %d. not supported!", model); + return -ENODEV; + } + + uvd = usbvideo_AllocateDevice(cams); + if (uvd != NULL) { + /* Here uvd is a fully allocated uvd object */ + uvd->flags = flags; + uvd->debug = debug; + uvd->dev = dev; + uvd->iface = ifnum; + uvd->ifaceAltInactive = inactInterface; + uvd->ifaceAltActive = actInterface; + uvd->video_endp = video_ep; + uvd->iso_packet_len = maxPS; + uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24; + uvd->defaultPalette = VIDEO_PALETTE_RGB24; + uvd->canvas = VIDEOSIZE(canvasX, canvasY); + uvd->videosize = ibmcam_size_to_videosize(size); + + /* Initialize ibmcam-specific data */ + assert(IBMCAM_T(uvd) != NULL); + IBMCAM_T(uvd)->camera_model = model; + IBMCAM_T(uvd)->initialized = 0; + + ibmcam_configure_video(uvd); + + i = usbvideo_RegisterVideoDevice(uvd); + if (i != 0) { + err("usbvideo_RegisterVideoDevice() failed."); + uvd = NULL; + } + } + usb_set_intfdata (intf, uvd); + return 0; +} + + +static struct usb_device_id id_table[] = { + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) }, /* Model 1 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) }, /* Model 3 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */ + { } /* Terminating entry */ +}; + +/* + * ibmcam_init() + * + * This code is run to initialize the driver. + * + * History: + * 1/27/00 Reworked to use statically allocated ibmcam structures. + * 21/10/00 Completely redesigned to use usbvideo services. + */ +static int __init ibmcam_init(void) +{ + struct usbvideo_cb cbTbl; + memset(&cbTbl, 0, sizeof(cbTbl)); + cbTbl.probe = ibmcam_probe; + cbTbl.setupOnOpen = ibmcam_setup_on_open; + cbTbl.videoStart = ibmcam_video_start; + cbTbl.videoStop = ibmcam_video_stop; + cbTbl.processData = ibmcam_ProcessIsocData; + cbTbl.postProcess = usbvideo_DeinterlaceFrame; + cbTbl.adjustPicture = ibmcam_adjust_picture; + cbTbl.getFPS = ibmcam_calculate_fps; + return usbvideo_register( + &cams, + MAX_IBMCAM, + sizeof(ibmcam_t), + "ibmcam", + &cbTbl, + THIS_MODULE, + id_table); +} + +static void __exit ibmcam_cleanup(void) +{ + usbvideo_Deregister(&cams); +} + +MODULE_DEVICE_TABLE(usb, id_table); + +module_init(ibmcam_init); +module_exit(ibmcam_cleanup); diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c new file mode 100644 index 00000000000..e2ede583518 --- /dev/null +++ b/drivers/media/video/usbvideo/konicawc.c @@ -0,0 +1,978 @@ +/* + * konicawc.c - konica webcam driver + * + * Author: Simon Evans <spse@secret.org.uk> + * + * Copyright (C) 2002 Simon Evans + * + * Licence: GPL + * + * Driver for USB webcams based on Konica chipset. This + * chipset is used in Intel YC76 camera. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/usb_input.h> + +#include "usbvideo.h" + +#define MAX_BRIGHTNESS 108 +#define MAX_CONTRAST 108 +#define MAX_SATURATION 108 +#define MAX_SHARPNESS 108 +#define MAX_WHITEBAL 372 +#define MAX_SPEED 6 + + +#define MAX_CAMERAS 1 + +#define DRIVER_VERSION "v1.4" +#define DRIVER_DESC "Konica Webcam driver" + +enum ctrl_req { + SetWhitebal = 0x01, + SetBrightness = 0x02, + SetSharpness = 0x03, + SetContrast = 0x04, + SetSaturation = 0x05, +}; + + +enum frame_sizes { + SIZE_160X120 = 0, + SIZE_160X136 = 1, + SIZE_176X144 = 2, + SIZE_320X240 = 3, + +}; + +#define MAX_FRAME_SIZE SIZE_320X240 + +static struct usbvideo *cams; + +#ifdef CONFIG_USB_DEBUG +static int debug; +#define DEBUG(n, format, arg...) \ + if (n <= debug) { \ + printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \ + } +#else +#define DEBUG(n, arg...) +static const int debug = 0; +#endif + + +/* Some default values for initial camera settings, + can be set by modprobe */ + +static int size; +static int speed = 6; /* Speed (fps) 0 (slowest) to 6 (fastest) */ +static int brightness = MAX_BRIGHTNESS/2; +static int contrast = MAX_CONTRAST/2; +static int saturation = MAX_SATURATION/2; +static int sharpness = MAX_SHARPNESS/2; +static int whitebal = 3*(MAX_WHITEBAL/4); + +static const int spd_to_iface[] = { 1, 0, 3, 2, 4, 5, 6 }; + +/* These FPS speeds are from the windows config box. They are + * indexed on size (0-2) and speed (0-6). Divide by 3 to get the + * real fps. + */ + +static const int spd_to_fps[][7] = { { 24, 40, 48, 60, 72, 80, 100 }, + { 24, 40, 48, 60, 72, 80, 100 }, + { 18, 30, 36, 45, 54, 60, 75 }, + { 6, 10, 12, 15, 18, 21, 25 } }; + +struct cam_size { + u16 width; + u16 height; + u8 cmd; +}; + +static const struct cam_size camera_sizes[] = { { 160, 120, 0x7 }, + { 160, 136, 0xa }, + { 176, 144, 0x4 }, + { 320, 240, 0x5 } }; + +struct konicawc { + u8 brightness; /* camera uses 0 - 9, x11 for real value */ + u8 contrast; /* as above */ + u8 saturation; /* as above */ + u8 sharpness; /* as above */ + u8 white_bal; /* 0 - 33, x11 for real value */ + u8 speed; /* Stored as 0 - 6, used as index in spd_to_* (above) */ + u8 size; /* Frame Size */ + int height; + int width; + struct urb *sts_urb[USBVIDEO_NUMSBUF]; + u8 sts_buf[USBVIDEO_NUMSBUF][FRAMES_PER_DESC]; + struct urb *last_data_urb; + int lastframe; + int cur_frame_size; /* number of bytes in current frame size */ + int maxline; /* number of lines per frame */ + int yplanesz; /* Number of bytes in the Y plane */ + unsigned int buttonsts:1; +#ifdef CONFIG_INPUT + struct input_dev *input; + char input_physname[64]; +#endif +}; + + +#define konicawc_set_misc(uvd, req, value, index) konicawc_ctrl_msg(uvd, USB_DIR_OUT, req, value, index, NULL, 0) +#define konicawc_get_misc(uvd, req, value, index, buf, sz) konicawc_ctrl_msg(uvd, USB_DIR_IN, req, value, index, buf, sz) +#define konicawc_set_value(uvd, value, index) konicawc_ctrl_msg(uvd, USB_DIR_OUT, 2, value, index, NULL, 0) + + +static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len) +{ + int retval = usb_control_msg(uvd->dev, + dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0), + request, 0x40 | dir, value, index, buf, len, 1000); + return retval < 0 ? retval : 0; +} + + +static inline void konicawc_camera_on(struct uvd *uvd) +{ + DEBUG(0, "camera on"); + konicawc_set_misc(uvd, 0x2, 1, 0x0b); +} + + +static inline void konicawc_camera_off(struct uvd *uvd) +{ + DEBUG(0, "camera off"); + konicawc_set_misc(uvd, 0x2, 0, 0x0b); +} + + +static void konicawc_set_camera_size(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + konicawc_set_misc(uvd, 0x2, camera_sizes[cam->size].cmd, 0x08); + cam->width = camera_sizes[cam->size].width; + cam->height = camera_sizes[cam->size].height; + cam->yplanesz = cam->height * cam->width; + cam->cur_frame_size = (cam->yplanesz * 3) / 2; + cam->maxline = cam->yplanesz / 256; + uvd->videosize = VIDEOSIZE(cam->width, cam->height); +} + + +static int konicawc_setup_on_open(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + DEBUG(1, "setting brightness to %d (%d)", cam->brightness, + cam->brightness * 11); + konicawc_set_value(uvd, cam->brightness, SetBrightness); + DEBUG(1, "setting white balance to %d (%d)", cam->white_bal, + cam->white_bal * 11); + konicawc_set_value(uvd, cam->white_bal, SetWhitebal); + DEBUG(1, "setting contrast to %d (%d)", cam->contrast, + cam->contrast * 11); + konicawc_set_value(uvd, cam->contrast, SetContrast); + DEBUG(1, "setting saturation to %d (%d)", cam->saturation, + cam->saturation * 11); + konicawc_set_value(uvd, cam->saturation, SetSaturation); + DEBUG(1, "setting sharpness to %d (%d)", cam->sharpness, + cam->sharpness * 11); + konicawc_set_value(uvd, cam->sharpness, SetSharpness); + konicawc_set_camera_size(uvd); + cam->lastframe = -2; + cam->buttonsts = 0; + return 0; +} + + +static void konicawc_adjust_picture(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + konicawc_camera_off(uvd); + DEBUG(1, "new brightness: %d", uvd->vpic.brightness); + uvd->vpic.brightness = (uvd->vpic.brightness > MAX_BRIGHTNESS) ? MAX_BRIGHTNESS : uvd->vpic.brightness; + if(cam->brightness != uvd->vpic.brightness / 11) { + cam->brightness = uvd->vpic.brightness / 11; + DEBUG(1, "setting brightness to %d (%d)", cam->brightness, + cam->brightness * 11); + konicawc_set_value(uvd, cam->brightness, SetBrightness); + } + + DEBUG(1, "new contrast: %d", uvd->vpic.contrast); + uvd->vpic.contrast = (uvd->vpic.contrast > MAX_CONTRAST) ? MAX_CONTRAST : uvd->vpic.contrast; + if(cam->contrast != uvd->vpic.contrast / 11) { + cam->contrast = uvd->vpic.contrast / 11; + DEBUG(1, "setting contrast to %d (%d)", cam->contrast, + cam->contrast * 11); + konicawc_set_value(uvd, cam->contrast, SetContrast); + } + konicawc_camera_on(uvd); +} + +#ifdef CONFIG_INPUT + +static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) +{ + struct input_dev *input_dev; + + usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); + strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); + + cam->input = input_dev = input_allocate_device(); + if (!input_dev) { + warn("Not enough memory for camera's input device\n"); + return; + } + + input_dev->name = "Konicawc snapshot button"; + input_dev->phys = cam->input_physname; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &dev->dev; + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + + input_dev->private = cam; + + input_register_device(cam->input); +} + +static void konicawc_unregister_input(struct konicawc *cam) +{ + if (cam->input) { + input_unregister_device(cam->input); + cam->input = NULL; + } +} + +static void konicawc_report_buttonstat(struct konicawc *cam) +{ + if (cam->input) { + input_report_key(cam->input, BTN_0, cam->buttonsts); + input_sync(cam->input); + } +} + +#else + +static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { } +static inline void konicawc_unregister_input(struct konicawc *cam) { } +static inline void konicawc_report_buttonstat(struct konicawc *cam) { } + +#endif /* CONFIG_INPUT */ + +static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb) +{ + char *cdata; + int i, totlen = 0; + unsigned char *status = stsurb->transfer_buffer; + int keep = 0, discard = 0, bad = 0; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + for (i = 0; i < dataurb->number_of_packets; i++) { + int button = cam->buttonsts; + unsigned char sts; + int n = dataurb->iso_frame_desc[i].actual_length; + int st = dataurb->iso_frame_desc[i].status; + cdata = dataurb->transfer_buffer + + dataurb->iso_frame_desc[i].offset; + + /* Detect and ignore errored packets */ + if (st < 0) { + DEBUG(1, "Data error: packet=%d. len=%d. status=%d.", + i, n, st); + uvd->stats.iso_err_count++; + continue; + } + + /* Detect and ignore empty packets */ + if (n <= 0) { + uvd->stats.iso_skip_count++; + continue; + } + + /* See what the status data said about the packet */ + sts = *(status+stsurb->iso_frame_desc[i].offset); + + /* sts: 0x80-0xff: frame start with frame number (ie 0-7f) + * otherwise: + * bit 0 0: keep packet + * 1: drop packet (padding data) + * + * bit 4 0 button not clicked + * 1 button clicked + * button is used to `take a picture' (in software) + */ + + if(sts < 0x80) { + button = !!(sts & 0x40); + sts &= ~0x40; + } + + /* work out the button status, but don't do + anything with it for now */ + + if(button != cam->buttonsts) { + DEBUG(2, "button: %sclicked", button ? "" : "un"); + cam->buttonsts = button; + konicawc_report_buttonstat(cam); + } + + if(sts == 0x01) { /* drop frame */ + discard++; + continue; + } + + if((sts > 0x01) && (sts < 0x80)) { + info("unknown status %2.2x", sts); + bad++; + continue; + } + if(!sts && cam->lastframe == -2) { + DEBUG(2, "dropping frame looking for image start"); + continue; + } + + keep++; + if(sts & 0x80) { /* frame start */ + unsigned char marker[] = { 0, 0xff, 0, 0x00 }; + + if(cam->lastframe == -2) { + DEBUG(2, "found initial image"); + cam->lastframe = -1; + } + + marker[3] = sts & 0x7F; + RingQueue_Enqueue(&uvd->dp, marker, 4); + totlen += 4; + } + + totlen += n; /* Little local accounting */ + RingQueue_Enqueue(&uvd->dp, cdata, n); + } + DEBUG(8, "finished: keep = %d discard = %d bad = %d added %d bytes", + keep, discard, bad, totlen); + return totlen; +} + + +static void resubmit_urb(struct uvd *uvd, struct urb *urb) +{ + int i, ret; + for (i = 0; i < FRAMES_PER_DESC; i++) { + urb->iso_frame_desc[i].status = 0; + } + urb->dev = uvd->dev; + urb->status = 0; + ret = usb_submit_urb(urb, GFP_ATOMIC); + DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length); + if(ret) + err("usb_submit_urb error (%d)", ret); + +} + + +static void konicawc_isoc_irq(struct urb *urb, struct pt_regs *regs) +{ + struct uvd *uvd = urb->context; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + /* We don't want to do anything if we are about to be removed! */ + if (!CAMERA_IS_OPERATIONAL(uvd)) + return; + + if (!uvd->streaming) { + DEBUG(1, "Not streaming, but interrupt!"); + return; + } + + DEBUG(3, "got frame %d len = %d buflen =%d", urb->start_frame, urb->actual_length, urb->transfer_buffer_length); + + uvd->stats.urb_count++; + + if (urb->transfer_buffer_length > 32) { + cam->last_data_urb = urb; + return; + } + /* Copy the data received into ring queue */ + if(cam->last_data_urb) { + int len = 0; + if(urb->start_frame != cam->last_data_urb->start_frame) + err("Lost sync on frames"); + else if (!urb->status && !cam->last_data_urb->status) + len = konicawc_compress_iso(uvd, cam->last_data_urb, urb); + + resubmit_urb(uvd, cam->last_data_urb); + resubmit_urb(uvd, urb); + cam->last_data_urb = NULL; + uvd->stats.urb_length = len; + uvd->stats.data_count += len; + if(len) + RingQueue_WakeUpInterruptible(&uvd->dp); + return; + } + return; +} + + +static int konicawc_start_data(struct uvd *uvd) +{ + struct usb_device *dev = uvd->dev; + int i, errFlag; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + int pktsz; + struct usb_interface *intf; + struct usb_host_interface *interface = NULL; + + intf = usb_ifnum_to_if(dev, uvd->iface); + if (intf) + interface = usb_altnum_to_altsetting(intf, + spd_to_iface[cam->speed]); + if (!interface) + return -ENXIO; + pktsz = le16_to_cpu(interface->endpoint[1].desc.wMaxPacketSize); + DEBUG(1, "pktsz = %d", pktsz); + if (!CAMERA_IS_OPERATIONAL(uvd)) { + err("Camera is not operational"); + return -EFAULT; + } + uvd->curframe = -1; + konicawc_camera_on(uvd); + /* Alternate interface 1 is is the biggest frame size */ + i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive); + if (i < 0) { + err("usb_set_interface error"); + uvd->last_error = i; + return -EBUSY; + } + + /* We double buffer the Iso lists */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + int j, k; + struct urb *urb = uvd->sbuf[i].urb; + urb->dev = dev; + urb->context = uvd; + urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp); + urb->interval = 1; + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = uvd->sbuf[i].data; + urb->complete = konicawc_isoc_irq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC; + for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = pktsz; + } + + urb = cam->sts_urb[i]; + urb->dev = dev; + urb->context = uvd; + urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp-1); + urb->interval = 1; + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = cam->sts_buf[i]; + urb->complete = konicawc_isoc_irq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = FRAMES_PER_DESC; + for (j=0; j < FRAMES_PER_DESC; j++) { + urb->iso_frame_desc[j].offset = j; + urb->iso_frame_desc[j].length = 1; + } + } + + cam->last_data_urb = NULL; + + /* Submit all URBs */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL); + if (errFlag) + err("usb_submit_isoc(%d) ret %d", i, errFlag); + + errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); + if (errFlag) + err ("usb_submit_isoc(%d) ret %d", i, errFlag); + } + + uvd->streaming = 1; + DEBUG(1, "streaming=1 video_endp=$%02x", uvd->video_endp); + return 0; +} + + +static void konicawc_stop_data(struct uvd *uvd) +{ + int i, j; + struct konicawc *cam; + + if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL)) + return; + + konicawc_camera_off(uvd); + uvd->streaming = 0; + cam = (struct konicawc *)uvd->user_data; + cam->last_data_urb = NULL; + + /* Unschedule all of the iso td's */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + usb_kill_urb(uvd->sbuf[i].urb); + usb_kill_urb(cam->sts_urb[i]); + } + + if (!uvd->remove_pending) { + /* Set packet size to 0 */ + j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive); + if (j < 0) { + err("usb_set_interface() error %d.", j); + uvd->last_error = j; + } + } +} + + +static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + int maxline = cam->maxline; + int yplanesz = cam->yplanesz; + + assert(frame != NULL); + + DEBUG(5, "maxline = %d yplanesz = %d", maxline, yplanesz); + DEBUG(3, "Frame state = %d", frame->scanstate); + + if(frame->scanstate == ScanState_Scanning) { + int drop = 0; + int curframe; + int fdrops = 0; + DEBUG(3, "Searching for marker, queue len = %d", RingQueue_GetLength(&uvd->dp)); + while(RingQueue_GetLength(&uvd->dp) >= 4) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) && + (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 3) < 0x80)) { + curframe = RING_QUEUE_PEEK(&uvd->dp, 3); + if(cam->lastframe >= 0) { + fdrops = (0x80 + curframe - cam->lastframe) & 0x7F; + fdrops--; + if(fdrops) { + info("Dropped %d frames (%d -> %d)", fdrops, + cam->lastframe, curframe); + } + } + cam->lastframe = curframe; + frame->curline = 0; + frame->scanstate = ScanState_Lines; + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4); + break; + } + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + drop++; + } + if(drop) + DEBUG(2, "dropped %d bytes looking for new frame", drop); + } + + if(frame->scanstate == ScanState_Scanning) + return; + + /* Try to move data from queue into frame buffer + * We get data in blocks of 384 bytes made up of: + * 256 Y, 64 U, 64 V. + * This needs to be written out as a Y plane, a U plane and a V plane. + */ + + while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) { + /* Y */ + RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256); + /* U */ + RingQueue_Dequeue(&uvd->dp, frame->data + yplanesz + (frame->curline * 64), 64); + /* V */ + RingQueue_Dequeue(&uvd->dp, frame->data + (5 * yplanesz)/4 + (frame->curline * 64), 64); + frame->seqRead_Length += 384; + frame->curline++; + } + /* See if we filled the frame */ + if (frame->curline == maxline) { + DEBUG(5, "got whole frame"); + + frame->frameState = FrameState_Done_Hold; + frame->curline = 0; + uvd->curframe = -1; + uvd->stats.frame_num++; + } +} + + +static int konicawc_find_fps(int size, int fps) +{ + int i; + + fps *= 3; + DEBUG(1, "konica_find_fps: size = %d fps = %d", size, fps); + if(fps <= spd_to_fps[size][0]) + return 0; + + if(fps >= spd_to_fps[size][MAX_SPEED]) + return MAX_SPEED; + + for(i = 0; i < MAX_SPEED; i++) { + if((fps >= spd_to_fps[size][i]) && (fps <= spd_to_fps[size][i+1])) { + DEBUG(2, "fps %d between %d and %d", fps, i, i+1); + if( (fps - spd_to_fps[size][i]) < (spd_to_fps[size][i+1] - fps)) + return i; + else + return i+1; + } + } + return MAX_SPEED+1; +} + + +static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + int newspeed = cam->speed; + int newsize; + int x = vw->width; + int y = vw->height; + int fps = vw->flags; + + if(x > 0 && y > 0) { + DEBUG(2, "trying to find size %d,%d", x, y); + for(newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) { + if((camera_sizes[newsize].width == x) && (camera_sizes[newsize].height == y)) + break; + } + } else { + newsize = cam->size; + } + + if(newsize > MAX_FRAME_SIZE) { + DEBUG(1, "couldn't find size %d,%d", x, y); + return -EINVAL; + } + + if(fps > 0) { + DEBUG(1, "trying to set fps to %d", fps); + newspeed = konicawc_find_fps(newsize, fps); + DEBUG(1, "find_fps returned %d (%d)", newspeed, spd_to_fps[newsize][newspeed]); + } + + if(newspeed > MAX_SPEED) + return -EINVAL; + + DEBUG(1, "setting size to %d speed to %d", newsize, newspeed); + if((newsize == cam->size) && (newspeed == cam->speed)) { + DEBUG(1, "Nothing to do"); + return 0; + } + DEBUG(0, "setting to %dx%d @ %d fps", camera_sizes[newsize].width, + camera_sizes[newsize].height, spd_to_fps[newsize][newspeed]/3); + + konicawc_stop_data(uvd); + uvd->ifaceAltActive = spd_to_iface[newspeed]; + DEBUG(1, "new interface = %d", uvd->ifaceAltActive); + cam->speed = newspeed; + + if(cam->size != newsize) { + cam->size = newsize; + konicawc_set_camera_size(uvd); + } + + /* Flush the input queue and clear any current frame in progress */ + + RingQueue_Flush(&uvd->dp); + cam->lastframe = -2; + if(uvd->curframe != -1) { + uvd->frame[uvd->curframe].curline = 0; + uvd->frame[uvd->curframe].seqRead_Length = 0; + uvd->frame[uvd->curframe].seqRead_Index = 0; + } + + konicawc_start_data(uvd); + return 0; +} + + +static int konicawc_calculate_fps(struct uvd *uvd) +{ + struct konicawc *cam = uvd->user_data; + return spd_to_fps[cam->size][cam->speed]/3; +} + + +static void konicawc_configure_video(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + u8 buf[2]; + + memset(&uvd->vpic, 0, sizeof(uvd->vpic)); + memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); + + RESTRICT_TO_RANGE(brightness, 0, MAX_BRIGHTNESS); + RESTRICT_TO_RANGE(contrast, 0, MAX_CONTRAST); + RESTRICT_TO_RANGE(saturation, 0, MAX_SATURATION); + RESTRICT_TO_RANGE(sharpness, 0, MAX_SHARPNESS); + RESTRICT_TO_RANGE(whitebal, 0, MAX_WHITEBAL); + + cam->brightness = brightness / 11; + cam->contrast = contrast / 11; + cam->saturation = saturation / 11; + cam->sharpness = sharpness / 11; + cam->white_bal = whitebal / 11; + + uvd->vpic.colour = 108; + uvd->vpic.hue = 108; + uvd->vpic.brightness = brightness; + uvd->vpic.contrast = contrast; + uvd->vpic.whiteness = whitebal; + uvd->vpic.depth = 6; + uvd->vpic.palette = VIDEO_PALETTE_YUV420P; + + memset(&uvd->vcap, 0, sizeof(uvd->vcap)); + strcpy(uvd->vcap.name, "Konica Webcam"); + uvd->vcap.type = VID_TYPE_CAPTURE; + uvd->vcap.channels = 1; + uvd->vcap.audios = 0; + uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width; + uvd->vcap.minheight = camera_sizes[SIZE_160X120].height; + uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width; + uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height; + + memset(&uvd->vchan, 0, sizeof(uvd->vchan)); + uvd->vchan.flags = 0 ; + uvd->vchan.tuners = 0; + uvd->vchan.channel = 0; + uvd->vchan.type = VIDEO_TYPE_CAMERA; + strcpy(uvd->vchan.name, "Camera"); + + /* Talk to device */ + DEBUG(1, "device init"); + if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2)) + DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]); + if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2)) + DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]); + if(konicawc_set_misc(uvd, 0x2, 0, 0xd)) + DEBUG(2, "2,0,d failed"); + DEBUG(1, "setting initial values"); +} + +static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct uvd *uvd = NULL; + int ix, i, nas; + int actInterface=-1, inactInterface=-1, maxPS=0; + unsigned char video_ep = 0; + + DEBUG(1, "konicawc_probe(%p)", intf); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice)); + RESTRICT_TO_RANGE(speed, 0, MAX_SPEED); + + /* Validate found interface: must have one ISO endpoint */ + nas = intf->num_altsetting; + if (nas != 8) { + err("Incorrect number of alternate settings (%d) for this camera!", nas); + return -ENODEV; + } + /* Validate all alternate settings */ + for (ix=0; ix < nas; ix++) { + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + + interface = &intf->altsetting[ix]; + i = interface->desc.bAlternateSetting; + if (interface->desc.bNumEndpoints != 2) { + err("Interface %d. has %u. endpoints!", + interface->desc.bInterfaceNumber, + (unsigned)(interface->desc.bNumEndpoints)); + return -ENODEV; + } + endpoint = &interface->endpoint[1].desc; + DEBUG(1, "found endpoint: addr: 0x%2.2x maxps = 0x%4.4x", + endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize)); + if (video_ep == 0) + video_ep = endpoint->bEndpointAddress; + else if (video_ep != endpoint->bEndpointAddress) { + err("Alternate settings have different endpoint addresses!"); + return -ENODEV; + } + if ((endpoint->bmAttributes & 0x03) != 0x01) { + err("Interface %d. has non-ISO endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & 0x80) == 0) { + err("Interface %d. has ISO OUT endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { + if (inactInterface < 0) + inactInterface = i; + else { + err("More than one inactive alt. setting!"); + return -ENODEV; + } + } else { + if (i == spd_to_iface[speed]) { + /* This one is the requested one */ + actInterface = i; + } + } + if (le16_to_cpu(endpoint->wMaxPacketSize) > maxPS) + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + } + if(actInterface == -1) { + err("Cant find required endpoint"); + return -ENODEV; + } + + DEBUG(1, "Selecting requested active setting=%d. maxPS=%d.", actInterface, maxPS); + + uvd = usbvideo_AllocateDevice(cams); + if (uvd != NULL) { + struct konicawc *cam = (struct konicawc *)(uvd->user_data); + /* Here uvd is a fully allocated uvd object */ + for(i = 0; i < USBVIDEO_NUMSBUF; i++) { + cam->sts_urb[i] = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if(cam->sts_urb[i] == NULL) { + while(i--) { + usb_free_urb(cam->sts_urb[i]); + } + err("can't allocate urbs"); + return -ENOMEM; + } + } + cam->speed = speed; + RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240); + cam->width = camera_sizes[size].width; + cam->height = camera_sizes[size].height; + cam->size = size; + + uvd->flags = 0; + uvd->debug = debug; + uvd->dev = dev; + uvd->iface = intf->altsetting->desc.bInterfaceNumber; + uvd->ifaceAltInactive = inactInterface; + uvd->ifaceAltActive = actInterface; + uvd->video_endp = video_ep; + uvd->iso_packet_len = maxPS; + uvd->paletteBits = 1L << VIDEO_PALETTE_YUV420P; + uvd->defaultPalette = VIDEO_PALETTE_YUV420P; + uvd->canvas = VIDEOSIZE(320, 240); + uvd->videosize = VIDEOSIZE(cam->width, cam->height); + + /* Initialize konicawc specific data */ + konicawc_configure_video(uvd); + + i = usbvideo_RegisterVideoDevice(uvd); + uvd->max_frame_size = (320 * 240 * 3)/2; + if (i != 0) { + err("usbvideo_RegisterVideoDevice() failed."); + uvd = NULL; + } + + konicawc_register_input(cam, dev); + } + + if (uvd) { + usb_set_intfdata (intf, uvd); + return 0; + } + return -EIO; +} + + +static void konicawc_free_uvd(struct uvd *uvd) +{ + int i; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + konicawc_unregister_input(cam); + + for (i = 0; i < USBVIDEO_NUMSBUF; i++) { + usb_free_urb(cam->sts_urb[i]); + cam->sts_urb[i] = NULL; + } +} + + +static struct usb_device_id id_table[] = { + { USB_DEVICE(0x04c8, 0x0720) }, /* Intel YC 76 */ + { } /* Terminating entry */ +}; + + +static int __init konicawc_init(void) +{ + struct usbvideo_cb cbTbl; + info(DRIVER_DESC " " DRIVER_VERSION); + memset(&cbTbl, 0, sizeof(cbTbl)); + cbTbl.probe = konicawc_probe; + cbTbl.setupOnOpen = konicawc_setup_on_open; + cbTbl.processData = konicawc_process_isoc; + cbTbl.getFPS = konicawc_calculate_fps; + cbTbl.setVideoMode = konicawc_set_video_mode; + cbTbl.startDataPump = konicawc_start_data; + cbTbl.stopDataPump = konicawc_stop_data; + cbTbl.adjustPicture = konicawc_adjust_picture; + cbTbl.userFree = konicawc_free_uvd; + return usbvideo_register( + &cams, + MAX_CAMERAS, + sizeof(struct konicawc), + "konicawc", + &cbTbl, + THIS_MODULE, + id_table); +} + + +static void __exit konicawc_cleanup(void) +{ + usbvideo_Deregister(&cams); +} + + +MODULE_DEVICE_TABLE(usb, id_table); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>"); +MODULE_DESCRIPTION(DRIVER_DESC); +module_param(speed, int, 0); +MODULE_PARM_DESC(speed, "Initial speed: 0 (slowest) - 6 (fastest)"); +module_param(size, int, 0); +MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 160x136 2: 176x144 3: 320x240"); +module_param(brightness, int, 0); +MODULE_PARM_DESC(brightness, "Initial brightness 0 - 108"); +module_param(contrast, int, 0); +MODULE_PARM_DESC(contrast, "Initial contrast 0 - 108"); +module_param(saturation, int, 0); +MODULE_PARM_DESC(saturation, "Initial saturation 0 - 108"); +module_param(sharpness, int, 0); +MODULE_PARM_DESC(sharpness, "Initial brightness 0 - 108"); +module_param(whitebal, int, 0); +MODULE_PARM_DESC(whitebal, "Initial white balance 0 - 363"); + +#ifdef CONFIG_USB_DEBUG +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); +#endif + +module_init(konicawc_init); +module_exit(konicawc_cleanup); diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c new file mode 100644 index 00000000000..75ff755224d --- /dev/null +++ b/drivers/media/video/usbvideo/ultracam.c @@ -0,0 +1,679 @@ +/* + * USB NB Camera driver + * + * HISTORY: + * 25-Dec-2002 Dmitri Removed lighting, sharpness parameters, methods. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/init.h> + +#include "usbvideo.h" + +#define ULTRACAM_VENDOR_ID 0x0461 +#define ULTRACAM_PRODUCT_ID 0x0813 + +#define MAX_CAMERAS 4 /* How many devices we allow to connect */ + +/* + * This structure lives in uvd_t->user field. + */ +typedef struct { + int initialized; /* Had we already sent init sequence? */ + int camera_model; /* What type of IBM camera we got? */ + int has_hdr; +} ultracam_t; +#define ULTRACAM_T(uvd) ((ultracam_t *)((uvd)->user_data)) + +static struct usbvideo *cams = NULL; + +static int debug = 0; + +static int flags = 0; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */ + +static const int min_canvasWidth = 8; +static const int min_canvasHeight = 4; + +#define FRAMERATE_MIN 0 +#define FRAMERATE_MAX 6 +static int framerate = -1; + +/* + * Here we define several initialization variables. They may + * be used to automatically set color, hue, brightness and + * contrast to desired values. This is particularly useful in + * case of webcams (which have no controls and no on-screen + * output) and also when a client V4L software is used that + * does not have some of those controls. In any case it's + * good to have startup values as options. + * + * These values are all in [0..255] range. This simplifies + * operation. Note that actual values of V4L variables may + * be scaled up (as much as << 8). User can see that only + * on overlay output, however, or through a V4L client. + */ +static int init_brightness = 128; +static int init_contrast = 192; +static int init_color = 128; +static int init_hue = 128; +static int hue_correction = 128; + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); +module_param(flags, int, 0); +MODULE_PARM_DESC(flags, + "Bitfield: 0=VIDIOCSYNC, " + "1=B/W, " + "2=show hints, " + "3=show stats, " + "4=test pattern, " + "5=separate frames, " + "6=clean frames"); +module_param(framerate, int, 0); +MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)"); + +module_param(init_brightness, int, 0); +MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)"); +module_param(init_contrast, int, 0); +MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)"); +module_param(init_color, int, 0); +MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)"); +module_param(init_hue, int, 0); +MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)"); +module_param(hue_correction, int, 0); +MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)"); + +/* + * ultracam_ProcessIsocData() + * + * Generic routine to parse the ring queue data. It employs either + * ultracam_find_header() or ultracam_parse_lines() to do most + * of work. + * + * 02-Nov-2000 First (mostly dummy) version. + * 06-Nov-2000 Rewrote to dump all data into frame. + */ +static void ultracam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame) +{ + int n; + + assert(uvd != NULL); + assert(frame != NULL); + + /* Try to move data from queue into frame buffer */ + n = RingQueue_GetLength(&uvd->dp); + if (n > 0) { + int m; + /* See how much spare we have left */ + m = uvd->max_frame_size - frame->seqRead_Length; + if (n > m) + n = m; + /* Now move that much data into frame buffer */ + RingQueue_Dequeue( + &uvd->dp, + frame->data + frame->seqRead_Length, + m); + frame->seqRead_Length += m; + } + /* See if we filled the frame */ + if (frame->seqRead_Length >= uvd->max_frame_size) { + frame->frameState = FrameState_Done; + uvd->curframe = -1; + uvd->stats.frame_num++; + } +} + +/* + * ultracam_veio() + * + * History: + * 1/27/00 Added check for dev == NULL; this happens if camera is unplugged. + */ +static int ultracam_veio( + struct uvd *uvd, + unsigned char req, + unsigned short value, + unsigned short index, + int is_out) +{ + static const char proc[] = "ultracam_veio"; + unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */; + int i; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return 0; + + if (!is_out) { + i = usb_control_msg( + uvd->dev, + usb_rcvctrlpipe(uvd->dev, 0), + req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + cp, + sizeof(cp), + 1000); +#if 1 + info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); +#endif + } else { + i = usb_control_msg( + uvd->dev, + usb_sndctrlpipe(uvd->dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + NULL, + 0, + 1000); + } + if (i < 0) { + err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.", + proc, i); + uvd->last_error = i; + } + return i; +} + +/* + * ultracam_calculate_fps() + */ +static int ultracam_calculate_fps(struct uvd *uvd) +{ + return 3 + framerate*4 + framerate/2; +} + +/* + * ultracam_adjust_contrast() + */ +static void ultracam_adjust_contrast(struct uvd *uvd) +{ +} + +/* + * ultracam_set_brightness() + * + * This procedure changes brightness of the picture. + */ +static void ultracam_set_brightness(struct uvd *uvd) +{ +} + +static void ultracam_set_hue(struct uvd *uvd) +{ +} + +/* + * ultracam_adjust_picture() + * + * This procedure gets called from V4L interface to update picture settings. + * Here we change brightness and contrast. + */ +static void ultracam_adjust_picture(struct uvd *uvd) +{ + ultracam_adjust_contrast(uvd); + ultracam_set_brightness(uvd); + ultracam_set_hue(uvd); +} + +/* + * ultracam_video_stop() + * + * This code tells camera to stop streaming. The interface remains + * configured and bandwidth - claimed. + */ +static void ultracam_video_stop(struct uvd *uvd) +{ +} + +/* + * ultracam_reinit_iso() + * + * This procedure sends couple of commands to the camera and then + * resets the video pipe. This sequence was observed to reinit the + * camera or, at least, to initiate ISO data stream. + */ +static void ultracam_reinit_iso(struct uvd *uvd, int do_stop) +{ +} + +static void ultracam_video_start(struct uvd *uvd) +{ + ultracam_reinit_iso(uvd, 0); +} + +static int ultracam_resetPipe(struct uvd *uvd) +{ + usb_clear_halt(uvd->dev, uvd->video_endp); + return 0; +} + +static int ultracam_alternateSetting(struct uvd *uvd, int setting) +{ + static const char proc[] = "ultracam_alternateSetting"; + int i; + i = usb_set_interface(uvd->dev, uvd->iface, setting); + if (i < 0) { + err("%s: usb_set_interface error", proc); + uvd->last_error = i; + return -EBUSY; + } + return 0; +} + +/* + * Return negative code on failure, 0 on success. + */ +static int ultracam_setup_on_open(struct uvd *uvd) +{ + int setup_ok = 0; /* Success by default */ + /* Send init sequence only once, it's large! */ + if (!ULTRACAM_T(uvd)->initialized) { + ultracam_alternateSetting(uvd, 0x04); + ultracam_alternateSetting(uvd, 0x00); + ultracam_veio(uvd, 0x02, 0x0004, 0x000b, 1); + ultracam_veio(uvd, 0x02, 0x0001, 0x0005, 1); + ultracam_veio(uvd, 0x02, 0x8000, 0x0000, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1); + ultracam_veio(uvd, 0x00, 0x00b0, 0x0001, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0002, 1); + ultracam_veio(uvd, 0x00, 0x000c, 0x0003, 1); + ultracam_veio(uvd, 0x00, 0x000b, 0x0004, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0005, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0006, 1); + ultracam_veio(uvd, 0x00, 0x0079, 0x0007, 1); + ultracam_veio(uvd, 0x00, 0x003b, 0x0008, 1); + ultracam_veio(uvd, 0x00, 0x0002, 0x000f, 1); + ultracam_veio(uvd, 0x00, 0x0001, 0x0010, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0011, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00bf, 1); + ultracam_veio(uvd, 0x00, 0x0001, 0x00c0, 1); + ultracam_veio(uvd, 0x00, 0x0010, 0x00cb, 1); + ultracam_veio(uvd, 0x01, 0x00a4, 0x0001, 1); + ultracam_veio(uvd, 0x01, 0x0010, 0x0002, 1); + ultracam_veio(uvd, 0x01, 0x0066, 0x0007, 1); + ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1); + ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1); + ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1); + ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1); + ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1); + ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1); + ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1); + ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1); + ultracam_veio(uvd, 0x01, 0x000b, 0x0011, 1); + ultracam_veio(uvd, 0x01, 0x0001, 0x0012, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0013, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0014, 1); + ultracam_veio(uvd, 0x01, 0x0087, 0x0051, 1); + ultracam_veio(uvd, 0x01, 0x0040, 0x0052, 1); + ultracam_veio(uvd, 0x01, 0x0058, 0x0053, 1); + ultracam_veio(uvd, 0x01, 0x0040, 0x0054, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0040, 1); + ultracam_veio(uvd, 0x01, 0x0010, 0x0041, 1); + ultracam_veio(uvd, 0x01, 0x0020, 0x0042, 1); + ultracam_veio(uvd, 0x01, 0x0030, 0x0043, 1); + ultracam_veio(uvd, 0x01, 0x0040, 0x0044, 1); + ultracam_veio(uvd, 0x01, 0x0050, 0x0045, 1); + ultracam_veio(uvd, 0x01, 0x0060, 0x0046, 1); + ultracam_veio(uvd, 0x01, 0x0070, 0x0047, 1); + ultracam_veio(uvd, 0x01, 0x0080, 0x0048, 1); + ultracam_veio(uvd, 0x01, 0x0090, 0x0049, 1); + ultracam_veio(uvd, 0x01, 0x00a0, 0x004a, 1); + ultracam_veio(uvd, 0x01, 0x00b0, 0x004b, 1); + ultracam_veio(uvd, 0x01, 0x00c0, 0x004c, 1); + ultracam_veio(uvd, 0x01, 0x00d0, 0x004d, 1); + ultracam_veio(uvd, 0x01, 0x00e0, 0x004e, 1); + ultracam_veio(uvd, 0x01, 0x00f0, 0x004f, 1); + ultracam_veio(uvd, 0x01, 0x00ff, 0x0050, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0056, 1); + ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0004, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0002, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0020, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0040, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0017, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x00c0, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x02, 0xc040, 0x0001, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0008, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x0009, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000b, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000c, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000d, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000e, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000f, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x0010, 0); + ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1); + ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1); + ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1); + ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1); + ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1); + ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1); + ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1); + ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0001, 0); + ultracam_veio(uvd, 0x01, 0x0064, 0x0001, 1); + ultracam_veio(uvd, 0x01, 0x0059, 0x0051, 1); + ultracam_veio(uvd, 0x01, 0x003f, 0x0052, 1); + ultracam_veio(uvd, 0x01, 0x0094, 0x0053, 1); + ultracam_veio(uvd, 0x01, 0x00ff, 0x0011, 1); + ultracam_veio(uvd, 0x01, 0x0003, 0x0012, 1); + ultracam_veio(uvd, 0x01, 0x00f7, 0x0013, 1); + ultracam_veio(uvd, 0x00, 0x0009, 0x0011, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0001, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1); + ultracam_veio(uvd, 0x00, 0x0020, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0010, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_alternateSetting(uvd, 0x04); + ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1); + ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1); + ultracam_veio(uvd, 0x02, 0x0000, 0x0006, 1); + ultracam_veio(uvd, 0x02, 0x9000, 0x0007, 1); + ultracam_veio(uvd, 0x02, 0x0042, 0x0001, 1); + ultracam_veio(uvd, 0x02, 0x0000, 0x000b, 0); + ultracam_resetPipe(uvd); + ULTRACAM_T(uvd)->initialized = (setup_ok != 0); + } + return setup_ok; +} + +static void ultracam_configure_video(struct uvd *uvd) +{ + if (uvd == NULL) + return; + + RESTRICT_TO_RANGE(init_brightness, 0, 255); + RESTRICT_TO_RANGE(init_contrast, 0, 255); + RESTRICT_TO_RANGE(init_color, 0, 255); + RESTRICT_TO_RANGE(init_hue, 0, 255); + RESTRICT_TO_RANGE(hue_correction, 0, 255); + + memset(&uvd->vpic, 0, sizeof(uvd->vpic)); + memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); + + uvd->vpic.colour = init_color << 8; + uvd->vpic.hue = init_hue << 8; + uvd->vpic.brightness = init_brightness << 8; + uvd->vpic.contrast = init_contrast << 8; + uvd->vpic.whiteness = 105 << 8; /* This one isn't used */ + uvd->vpic.depth = 24; + uvd->vpic.palette = VIDEO_PALETTE_RGB24; + + memset(&uvd->vcap, 0, sizeof(uvd->vcap)); + strcpy(uvd->vcap.name, "IBM Ultra Camera"); + uvd->vcap.type = VID_TYPE_CAPTURE; + uvd->vcap.channels = 1; + uvd->vcap.audios = 0; + uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas); + uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas); + uvd->vcap.minwidth = min_canvasWidth; + uvd->vcap.minheight = min_canvasHeight; + + memset(&uvd->vchan, 0, sizeof(uvd->vchan)); + uvd->vchan.flags = 0; + uvd->vchan.tuners = 0; + uvd->vchan.channel = 0; + uvd->vchan.type = VIDEO_TYPE_CAMERA; + strcpy(uvd->vchan.name, "Camera"); +} + +/* + * ultracam_probe() + * + * This procedure queries device descriptor and accepts the interface + * if it looks like our camera. + * + * History: + * 12-Nov-2000 Reworked to comply with new probe() signature. + * 23-Jan-2001 Added compatibility with 2.2.x kernels. + */ +static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct uvd *uvd = NULL; + int ix, i, nas; + int actInterface=-1, inactInterface=-1, maxPS=0; + unsigned char video_ep = 0; + + if (debug >= 1) + info("ultracam_probe(%p)", intf); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + info("IBM Ultra camera found (rev. 0x%04x)", + le16_to_cpu(dev->descriptor.bcdDevice)); + + /* Validate found interface: must have one ISO endpoint */ + nas = intf->num_altsetting; + if (debug > 0) + info("Number of alternate settings=%d.", nas); + if (nas < 8) { + err("Too few alternate settings for this camera!"); + return -ENODEV; + } + /* Validate all alternate settings */ + for (ix=0; ix < nas; ix++) { + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + + interface = &intf->altsetting[ix]; + i = interface->desc.bAlternateSetting; + if (interface->desc.bNumEndpoints != 1) { + err("Interface %d. has %u. endpoints!", + interface->desc.bInterfaceNumber, + (unsigned)(interface->desc.bNumEndpoints)); + return -ENODEV; + } + endpoint = &interface->endpoint[0].desc; + if (video_ep == 0) + video_ep = endpoint->bEndpointAddress; + else if (video_ep != endpoint->bEndpointAddress) { + err("Alternate settings have different endpoint addresses!"); + return -ENODEV; + } + if ((endpoint->bmAttributes & 0x03) != 0x01) { + err("Interface %d. has non-ISO endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & 0x80) == 0) { + err("Interface %d. has ISO OUT endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { + if (inactInterface < 0) + inactInterface = i; + else { + err("More than one inactive alt. setting!"); + return -ENODEV; + } + } else { + if (actInterface < 0) { + actInterface = i; + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + if (debug > 0) + info("Active setting=%d. maxPS=%d.", i, maxPS); + } else { + /* Got another active alt. setting */ + if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) { + /* This one is better! */ + actInterface = i; + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + if (debug > 0) { + info("Even better ctive setting=%d. maxPS=%d.", + i, maxPS); + } + } + } + } + } + if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) { + err("Failed to recognize the camera!"); + return -ENODEV; + } + + uvd = usbvideo_AllocateDevice(cams); + if (uvd != NULL) { + /* Here uvd is a fully allocated uvd object */ + uvd->flags = flags; + uvd->debug = debug; + uvd->dev = dev; + uvd->iface = intf->altsetting->desc.bInterfaceNumber; + uvd->ifaceAltInactive = inactInterface; + uvd->ifaceAltActive = actInterface; + uvd->video_endp = video_ep; + uvd->iso_packet_len = maxPS; + uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24; + uvd->defaultPalette = VIDEO_PALETTE_RGB24; + uvd->canvas = VIDEOSIZE(640, 480); /* FIXME */ + uvd->videosize = uvd->canvas; /* ultracam_size_to_videosize(size);*/ + + /* Initialize ibmcam-specific data */ + assert(ULTRACAM_T(uvd) != NULL); + ULTRACAM_T(uvd)->camera_model = 0; /* Not used yet */ + ULTRACAM_T(uvd)->initialized = 0; + + ultracam_configure_video(uvd); + + i = usbvideo_RegisterVideoDevice(uvd); + if (i != 0) { + err("usbvideo_RegisterVideoDevice() failed."); + uvd = NULL; + } + } + + if (uvd) { + usb_set_intfdata (intf, uvd); + return 0; + } + return -EIO; +} + + +static struct usb_device_id id_table[] = { + { USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +/* + * ultracam_init() + * + * This code is run to initialize the driver. + */ +static int __init ultracam_init(void) +{ + struct usbvideo_cb cbTbl; + memset(&cbTbl, 0, sizeof(cbTbl)); + cbTbl.probe = ultracam_probe; + cbTbl.setupOnOpen = ultracam_setup_on_open; + cbTbl.videoStart = ultracam_video_start; + cbTbl.videoStop = ultracam_video_stop; + cbTbl.processData = ultracam_ProcessIsocData; + cbTbl.postProcess = usbvideo_DeinterlaceFrame; + cbTbl.adjustPicture = ultracam_adjust_picture; + cbTbl.getFPS = ultracam_calculate_fps; + return usbvideo_register( + &cams, + MAX_CAMERAS, + sizeof(ultracam_t), + "ultracam", + &cbTbl, + THIS_MODULE, + id_table); +} + +static void __exit ultracam_cleanup(void) +{ + usbvideo_Deregister(&cams); +} + +MODULE_DEVICE_TABLE(usb, id_table); +MODULE_LICENSE("GPL"); + +module_init(ultracam_init); +module_exit(ultracam_cleanup); diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c new file mode 100644 index 00000000000..0b51fae720a --- /dev/null +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -0,0 +1,2190 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/smp_lock.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/io.h> + +#include "usbvideo.h" + +#if defined(MAP_NR) +#define virt_to_page(v) MAP_NR(v) /* Kernels 2.2.x */ +#endif + +static int video_nr = -1; +module_param(video_nr, int, 0); + +/* + * Local prototypes. + */ +static void usbvideo_Disconnect(struct usb_interface *intf); +static void usbvideo_CameraRelease(struct uvd *uvd); + +static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma); +static int usbvideo_v4l_open(struct inode *inode, struct file *file); +static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos); +static int usbvideo_v4l_close(struct inode *inode, struct file *file); + +static int usbvideo_StartDataPump(struct uvd *uvd); +static void usbvideo_StopDataPump(struct uvd *uvd); +static int usbvideo_GetFrame(struct uvd *uvd, int frameNum); +static int usbvideo_NewFrame(struct uvd *uvd, int framenum); +static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd, + struct usbvideo_frame *frame); + +/*******************************/ +/* Memory management functions */ +/*******************************/ +static void *usbvideo_rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void usbvideo_rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +static void RingQueue_Initialize(struct RingQueue *rq) +{ + assert(rq != NULL); + init_waitqueue_head(&rq->wqh); +} + +static void RingQueue_Allocate(struct RingQueue *rq, int rqLen) +{ + /* Make sure the requested size is a power of 2 and + round up if necessary. This allows index wrapping + using masks rather than modulo */ + + int i = 1; + assert(rq != NULL); + assert(rqLen > 0); + + while(rqLen >> i) + i++; + if(rqLen != 1 << (i-1)) + rqLen = 1 << i; + + rq->length = rqLen; + rq->ri = rq->wi = 0; + rq->queue = usbvideo_rvmalloc(rq->length); + assert(rq->queue != NULL); +} + +static int RingQueue_IsAllocated(const struct RingQueue *rq) +{ + if (rq == NULL) + return 0; + return (rq->queue != NULL) && (rq->length > 0); +} + +static void RingQueue_Free(struct RingQueue *rq) +{ + assert(rq != NULL); + if (RingQueue_IsAllocated(rq)) { + usbvideo_rvfree(rq->queue, rq->length); + rq->queue = NULL; + rq->length = 0; + } +} + +int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len) +{ + int rql, toread; + + assert(rq != NULL); + assert(dst != NULL); + + rql = RingQueue_GetLength(rq); + if(!rql) + return 0; + + /* Clip requested length to available data */ + if(len > rql) + len = rql; + + toread = len; + if(rq->ri > rq->wi) { + /* Read data from tail */ + int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri; + memcpy(dst, rq->queue + rq->ri, read); + toread -= read; + dst += read; + rq->ri = (rq->ri + read) & (rq->length-1); + } + if(toread) { + /* Read data from head */ + memcpy(dst, rq->queue + rq->ri, toread); + rq->ri = (rq->ri + toread) & (rq->length-1); + } + return len; +} + +EXPORT_SYMBOL(RingQueue_Dequeue); + +int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n) +{ + int enqueued = 0; + + assert(rq != NULL); + assert(cdata != NULL); + assert(rq->length > 0); + while (n > 0) { + int m, q_avail; + + /* Calculate the largest chunk that fits the tail of the ring */ + q_avail = rq->length - rq->wi; + if (q_avail <= 0) { + rq->wi = 0; + q_avail = rq->length; + } + m = n; + assert(q_avail > 0); + if (m > q_avail) + m = q_avail; + + memcpy(rq->queue + rq->wi, cdata, m); + RING_QUEUE_ADVANCE_INDEX(rq, wi, m); + cdata += m; + enqueued += m; + n -= m; + } + return enqueued; +} + +EXPORT_SYMBOL(RingQueue_Enqueue); + +static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq) +{ + assert(rq != NULL); + interruptible_sleep_on(&rq->wqh); +} + +void RingQueue_WakeUpInterruptible(struct RingQueue *rq) +{ + assert(rq != NULL); + if (waitqueue_active(&rq->wqh)) + wake_up_interruptible(&rq->wqh); +} + +EXPORT_SYMBOL(RingQueue_WakeUpInterruptible); + +void RingQueue_Flush(struct RingQueue *rq) +{ + assert(rq != NULL); + rq->ri = 0; + rq->wi = 0; +} + +EXPORT_SYMBOL(RingQueue_Flush); + + +/* + * usbvideo_VideosizeToString() + * + * This procedure converts given videosize value to readable string. + * + * History: + * 07-Aug-2000 Created. + * 19-Oct-2000 Reworked for usbvideo module. + */ +static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs) +{ + char tmp[40]; + int n; + + n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs)); + assert(n < sizeof(tmp)); + if ((buf == NULL) || (bufLen < n)) + err("usbvideo_VideosizeToString: buffer is too small."); + else + memmove(buf, tmp, n); +} + +/* + * usbvideo_OverlayChar() + * + * History: + * 01-Feb-2000 Created. + */ +static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame, + int x, int y, int ch) +{ + static const unsigned short digits[16] = { + 0xF6DE, /* 0 */ + 0x2492, /* 1 */ + 0xE7CE, /* 2 */ + 0xE79E, /* 3 */ + 0xB792, /* 4 */ + 0xF39E, /* 5 */ + 0xF3DE, /* 6 */ + 0xF492, /* 7 */ + 0xF7DE, /* 8 */ + 0xF79E, /* 9 */ + 0x77DA, /* a */ + 0xD75C, /* b */ + 0xF24E, /* c */ + 0xD6DC, /* d */ + 0xF34E, /* e */ + 0xF348 /* f */ + }; + unsigned short digit; + int ix, iy; + + if ((uvd == NULL) || (frame == NULL)) + return; + + if (ch >= '0' && ch <= '9') + ch -= '0'; + else if (ch >= 'A' && ch <= 'F') + ch = 10 + (ch - 'A'); + else if (ch >= 'a' && ch <= 'f') + ch = 10 + (ch - 'a'); + else + return; + digit = digits[ch]; + + for (iy=0; iy < 5; iy++) { + for (ix=0; ix < 3; ix++) { + if (digit & 0x8000) { + if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) { +/* TODO */ RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF); + } + } + digit = digit << 1; + } + } +} + +/* + * usbvideo_OverlayString() + * + * History: + * 01-Feb-2000 Created. + */ +static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame, + int x, int y, const char *str) +{ + while (*str) { + usbvideo_OverlayChar(uvd, frame, x, y, *str); + str++; + x += 4; /* 3 pixels character + 1 space */ + } +} + +/* + * usbvideo_OverlayStats() + * + * Overlays important debugging information. + * + * History: + * 01-Feb-2000 Created. + */ +static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame) +{ + const int y_diff = 8; + char tmp[16]; + int x = 10, y=10; + long i, j, barLength; + const int qi_x1 = 60, qi_y1 = 10; + const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10; + + /* Call the user callback, see if we may proceed after that */ + if (VALID_CALLBACK(uvd, overlayHook)) { + if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0) + return; + } + + /* + * We draw a (mostly) hollow rectangle with qi_xxx coordinates. + * Left edge symbolizes the queue index 0; right edge symbolizes + * the full capacity of the queue. + */ + barLength = qi_x2 - qi_x1 - 2; + if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) { +/* TODO */ long u_lo, u_hi, q_used; + long m_ri, m_wi, m_lo, m_hi; + + /* + * Determine fill zones (used areas of the queue): + * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length + * + * if u_lo < 0 then there is no first filler. + */ + + q_used = RingQueue_GetLength(&uvd->dp); + if ((uvd->dp.ri + q_used) >= uvd->dp.length) { + u_hi = uvd->dp.length; + u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1); + } else { + u_hi = (q_used + uvd->dp.ri); + u_lo = -1; + } + + /* Convert byte indices into screen units */ + m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length); + m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length); + m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1; + m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length); + + for (j=qi_y1; j < (qi_y1 + qi_h); j++) { + for (i=qi_x1; i < qi_x2; i++) { + /* Draw border lines */ + if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) || + (i == qi_x1) || (i == (qi_x2 - 1))) { + RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF); + continue; + } + /* For all other points the Y coordinate does not matter */ + if ((i >= m_ri) && (i <= (m_ri + 3))) { + RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00); + } else if ((i >= m_wi) && (i <= (m_wi + 3))) { + RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00); + } else if ((i < m_lo) || ((i > m_ri) && (i < m_hi))) + RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF); + } + } + } + + sprintf(tmp, "%8lx", uvd->stats.frame_num); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.urb_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.urb_length); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.data_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.header_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.iso_skip_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.iso_err_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.colour); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.hue); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.brightness >> 8); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.contrast >> 12); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; +} + +/* + * usbvideo_ReportStatistics() + * + * This procedure prints packet and transfer statistics. + * + * History: + * 14-Jan-2000 Corrected default multiplier. + */ +static void usbvideo_ReportStatistics(const struct uvd *uvd) +{ + if ((uvd != NULL) && (uvd->stats.urb_count > 0)) { + unsigned long allPackets, badPackets, goodPackets, percent; + allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES; + badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count; + goodPackets = allPackets - badPackets; + /* Calculate percentage wisely, remember integer limits */ + assert(allPackets != 0); + if (goodPackets < (((unsigned long)-1)/100)) + percent = (100 * goodPackets) / allPackets; + else + percent = goodPackets / (allPackets / 100); + info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%", + allPackets, badPackets, percent); + if (uvd->iso_packet_len > 0) { + unsigned long allBytes, xferBytes; + char multiplier = ' '; + allBytes = allPackets * uvd->iso_packet_len; + xferBytes = uvd->stats.data_count; + assert(allBytes != 0); + if (xferBytes < (((unsigned long)-1)/100)) + percent = (100 * xferBytes) / allBytes; + else + percent = xferBytes / (allBytes / 100); + /* Scale xferBytes for easy reading */ + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'K'; + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'M'; + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'G'; + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'T'; + } + } + } + } + info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%", + xferBytes, multiplier, percent); + } + } +} + +/* + * usbvideo_TestPattern() + * + * Procedure forms a test pattern (yellow grid on blue background). + * + * Parameters: + * fullframe: if TRUE then entire frame is filled, otherwise the procedure + * continues from the current scanline. + * pmode 0: fill the frame with solid blue color (like on VCR or TV) + * 1: Draw a colored grid + * + * History: + * 01-Feb-2000 Created. + */ +void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode) +{ + struct usbvideo_frame *frame; + int num_cell = 0; + int scan_length = 0; + static int num_pass = 0; + + if (uvd == NULL) { + err("%s: uvd == NULL", __FUNCTION__); + return; + } + if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) { + err("%s: uvd->curframe=%d.", __FUNCTION__, uvd->curframe); + return; + } + + /* Grab the current frame */ + frame = &uvd->frame[uvd->curframe]; + + /* Optionally start at the beginning */ + if (fullframe) { + frame->curline = 0; + frame->seqRead_Length = 0; + } +#if 0 + { /* For debugging purposes only */ + char tmp[20]; + usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request); + info("testpattern: frame=%s", tmp); + } +#endif + /* Form every scan line */ + for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) { + int i; + unsigned char *f = frame->data + + (VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline); + for (i=0; i < VIDEOSIZE_X(frame->request); i++) { + unsigned char cb=0x80; + unsigned char cg = 0; + unsigned char cr = 0; + + if (pmode == 1) { + if (frame->curline % 32 == 0) + cb = 0, cg = cr = 0xFF; + else if (i % 32 == 0) { + if (frame->curline % 32 == 1) + num_cell++; + cb = 0, cg = cr = 0xFF; + } else { + cb = ((num_cell*7) + num_pass) & 0xFF; + cg = ((num_cell*5) + num_pass*2) & 0xFF; + cr = ((num_cell*3) + num_pass*3) & 0xFF; + } + } else { + /* Just the blue screen */ + } + + *f++ = cb; + *f++ = cg; + *f++ = cr; + scan_length += 3; + } + } + + frame->frameState = FrameState_Done; + frame->seqRead_Length += scan_length; + ++num_pass; + + /* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */ + usbvideo_OverlayStats(uvd, frame); +} + +EXPORT_SYMBOL(usbvideo_TestPattern); + + +#ifdef DEBUG +/* + * usbvideo_HexDump() + * + * A debugging tool. Prints hex dumps. + * + * History: + * 29-Jul-2000 Added printing of offsets. + */ +void usbvideo_HexDump(const unsigned char *data, int len) +{ + const int bytes_per_line = 32; + char tmp[128]; /* 32*3 + 5 */ + int i, k; + + for (i=k=0; len > 0; i++, len--) { + if (i > 0 && ((i % bytes_per_line) == 0)) { + printk("%s\n", tmp); + k=0; + } + if ((i % bytes_per_line) == 0) + k += sprintf(&tmp[k], "%04x: ", i); + k += sprintf(&tmp[k], "%02x ", data[i]); + } + if (k > 0) + printk("%s\n", tmp); +} + +EXPORT_SYMBOL(usbvideo_HexDump); + +#endif + +/* ******************************************************************** */ + +/* XXX: this piece of crap really wants some error handling.. */ +static void usbvideo_ClientIncModCount(struct uvd *uvd) +{ + if (uvd == NULL) { + err("%s: uvd == NULL", __FUNCTION__); + return; + } + if (uvd->handle == NULL) { + err("%s: uvd->handle == NULL", __FUNCTION__); + return; + } + if (uvd->handle->md_module == NULL) { + err("%s: uvd->handle->md_module == NULL", __FUNCTION__); + return; + } + if (!try_module_get(uvd->handle->md_module)) { + err("%s: try_module_get() == 0", __FUNCTION__); + return; + } +} + +static void usbvideo_ClientDecModCount(struct uvd *uvd) +{ + if (uvd == NULL) { + err("%s: uvd == NULL", __FUNCTION__); + return; + } + if (uvd->handle == NULL) { + err("%s: uvd->handle == NULL", __FUNCTION__); + return; + } + if (uvd->handle->md_module == NULL) { + err("%s: uvd->handle->md_module == NULL", __FUNCTION__); + return; + } + module_put(uvd->handle->md_module); +} + +int usbvideo_register( + struct usbvideo **pCams, + const int num_cams, + const int num_extra, + const char *driverName, + const struct usbvideo_cb *cbTbl, + struct module *md, + const struct usb_device_id *id_table) +{ + struct usbvideo *cams; + int i, base_size, result; + + /* Check parameters for sanity */ + if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) { + err("%s: Illegal call", __FUNCTION__); + return -EINVAL; + } + + /* Check registration callback - must be set! */ + if (cbTbl->probe == NULL) { + err("%s: probe() is required!", __FUNCTION__); + return -EINVAL; + } + + base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo); + cams = (struct usbvideo *) kzalloc(base_size, GFP_KERNEL); + if (cams == NULL) { + err("Failed to allocate %d. bytes for usbvideo struct", base_size); + return -ENOMEM; + } + dbg("%s: Allocated $%p (%d. bytes) for %d. cameras", + __FUNCTION__, cams, base_size, num_cams); + + /* Copy callbacks, apply defaults for those that are not set */ + memmove(&cams->cb, cbTbl, sizeof(cams->cb)); + if (cams->cb.getFrame == NULL) + cams->cb.getFrame = usbvideo_GetFrame; + if (cams->cb.disconnect == NULL) + cams->cb.disconnect = usbvideo_Disconnect; + if (cams->cb.startDataPump == NULL) + cams->cb.startDataPump = usbvideo_StartDataPump; + if (cams->cb.stopDataPump == NULL) + cams->cb.stopDataPump = usbvideo_StopDataPump; + + cams->num_cameras = num_cams; + cams->cam = (struct uvd *) &cams[1]; + cams->md_module = md; + if (cams->md_module == NULL) + warn("%s: module == NULL!", __FUNCTION__); + mutex_init(&cams->lock); /* to 1 == available */ + + for (i = 0; i < num_cams; i++) { + struct uvd *up = &cams->cam[i]; + + up->handle = cams; + + /* Allocate user_data separately because of kmalloc's limits */ + if (num_extra > 0) { + up->user_size = num_cams * num_extra; + up->user_data = kmalloc(up->user_size, GFP_KERNEL); + if (up->user_data == NULL) { + err("%s: Failed to allocate user_data (%d. bytes)", + __FUNCTION__, up->user_size); + while (i) { + up = &cams->cam[--i]; + kfree(up->user_data); + } + kfree(cams); + return -ENOMEM; + } + dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)", + __FUNCTION__, i, up->user_data, up->user_size); + } + } + + /* + * Register ourselves with USB stack. + */ + strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown"); + cams->usbdrv.name = cams->drvName; + cams->usbdrv.probe = cams->cb.probe; + cams->usbdrv.disconnect = cams->cb.disconnect; + cams->usbdrv.id_table = id_table; + + /* + * Update global handle to usbvideo. This is very important + * because probe() can be called before usb_register() returns. + * If the handle is not yet updated then the probe() will fail. + */ + *pCams = cams; + result = usb_register(&cams->usbdrv); + if (result) { + for (i = 0; i < num_cams; i++) { + struct uvd *up = &cams->cam[i]; + kfree(up->user_data); + } + kfree(cams); + } + + return result; +} + +EXPORT_SYMBOL(usbvideo_register); + +/* + * usbvideo_Deregister() + * + * Procedure frees all usbvideo and user data structures. Be warned that + * if you had some dynamically allocated components in ->user field then + * you should free them before calling here. + */ +void usbvideo_Deregister(struct usbvideo **pCams) +{ + struct usbvideo *cams; + int i; + + if (pCams == NULL) { + err("%s: pCams == NULL", __FUNCTION__); + return; + } + cams = *pCams; + if (cams == NULL) { + err("%s: cams == NULL", __FUNCTION__); + return; + } + + dbg("%s: Deregistering %s driver.", __FUNCTION__, cams->drvName); + usb_deregister(&cams->usbdrv); + + dbg("%s: Deallocating cams=$%p (%d. cameras)", __FUNCTION__, cams, cams->num_cameras); + for (i=0; i < cams->num_cameras; i++) { + struct uvd *up = &cams->cam[i]; + int warning = 0; + + if (up->user_data != NULL) { + if (up->user_size <= 0) + ++warning; + } else { + if (up->user_size > 0) + ++warning; + } + if (warning) { + err("%s: Warning: user_data=$%p user_size=%d.", + __FUNCTION__, up->user_data, up->user_size); + } else { + dbg("%s: Freeing %d. $%p->user_data=$%p", + __FUNCTION__, i, up, up->user_data); + kfree(up->user_data); + } + } + /* Whole array was allocated in one chunk */ + dbg("%s: Freed %d uvd structures", + __FUNCTION__, cams->num_cameras); + kfree(cams); + *pCams = NULL; +} + +EXPORT_SYMBOL(usbvideo_Deregister); + +/* + * usbvideo_Disconnect() + * + * This procedure stops all driver activity. Deallocation of + * the interface-private structure (pointed by 'ptr') is done now + * (if we don't have any open files) or later, when those files + * are closed. After that driver should be removable. + * + * This code handles surprise removal. The uvd->user is a counter which + * increments on open() and decrements on close(). If we see here that + * this counter is not 0 then we have a client who still has us opened. + * We set uvd->remove_pending flag as early as possible, and after that + * all access to the camera will gracefully fail. These failures should + * prompt client to (eventually) close the video device, and then - in + * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter. + * + * History: + * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone. + * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close() + * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT). + * 19-Oct-2000 Moved to usbvideo module. + */ +static void usbvideo_Disconnect(struct usb_interface *intf) +{ + struct uvd *uvd = usb_get_intfdata (intf); + int i; + + if (uvd == NULL) { + err("%s($%p): Illegal call.", __FUNCTION__, intf); + return; + } + + usb_set_intfdata (intf, NULL); + + usbvideo_ClientIncModCount(uvd); + if (uvd->debug > 0) + info("%s(%p.)", __FUNCTION__, intf); + + mutex_lock(&uvd->lock); + uvd->remove_pending = 1; /* Now all ISO data will be ignored */ + + /* At this time we ask to cancel outstanding URBs */ + GET_CALLBACK(uvd, stopDataPump)(uvd); + + for (i=0; i < USBVIDEO_NUMSBUF; i++) + usb_free_urb(uvd->sbuf[i].urb); + + usb_put_dev(uvd->dev); + uvd->dev = NULL; /* USB device is no more */ + + video_unregister_device(&uvd->vdev); + if (uvd->debug > 0) + info("%s: Video unregistered.", __FUNCTION__); + + if (uvd->user) + info("%s: In use, disconnect pending.", __FUNCTION__); + else + usbvideo_CameraRelease(uvd); + mutex_unlock(&uvd->lock); + info("USB camera disconnected."); + + usbvideo_ClientDecModCount(uvd); +} + +/* + * usbvideo_CameraRelease() + * + * This code does final release of uvd. This happens + * after the device is disconnected -and- all clients + * closed their files. + * + * History: + * 27-Jan-2000 Created. + */ +static void usbvideo_CameraRelease(struct uvd *uvd) +{ + if (uvd == NULL) { + err("%s: Illegal call", __FUNCTION__); + return; + } + + RingQueue_Free(&uvd->dp); + if (VALID_CALLBACK(uvd, userFree)) + GET_CALLBACK(uvd, userFree)(uvd); + uvd->uvd_used = 0; /* This is atomic, no need to take mutex */ +} + +/* + * usbvideo_find_struct() + * + * This code searches the array of preallocated (static) structures + * and returns index of the first one that isn't in use. Returns -1 + * if there are no free structures. + * + * History: + * 27-Jan-2000 Created. + */ +static int usbvideo_find_struct(struct usbvideo *cams) +{ + int u, rv = -1; + + if (cams == NULL) { + err("No usbvideo handle?"); + return -1; + } + mutex_lock(&cams->lock); + for (u = 0; u < cams->num_cameras; u++) { + struct uvd *uvd = &cams->cam[u]; + if (!uvd->uvd_used) /* This one is free */ + { + uvd->uvd_used = 1; /* In use now */ + mutex_init(&uvd->lock); /* to 1 == available */ + uvd->dev = NULL; + rv = u; + break; + } + } + mutex_unlock(&cams->lock); + return rv; +} + +static struct file_operations usbvideo_fops = { + .owner = THIS_MODULE, + .open = usbvideo_v4l_open, + .release =usbvideo_v4l_close, + .read = usbvideo_v4l_read, + .mmap = usbvideo_v4l_mmap, + .ioctl = usbvideo_v4l_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static const struct video_device usbvideo_template = { + .owner = THIS_MODULE, + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_CPIA, + .fops = &usbvideo_fops, +}; + +struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams) +{ + int i, devnum; + struct uvd *uvd = NULL; + + if (cams == NULL) { + err("No usbvideo handle?"); + return NULL; + } + + devnum = usbvideo_find_struct(cams); + if (devnum == -1) { + err("IBM USB camera driver: Too many devices!"); + return NULL; + } + uvd = &cams->cam[devnum]; + dbg("Device entry #%d. at $%p", devnum, uvd); + + /* Not relying upon caller we increase module counter ourselves */ + usbvideo_ClientIncModCount(uvd); + + mutex_lock(&uvd->lock); + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if (uvd->sbuf[i].urb == NULL) { + err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC); + uvd->uvd_used = 0; + uvd = NULL; + goto allocate_done; + } + } + uvd->user=0; + uvd->remove_pending = 0; + uvd->last_error = 0; + RingQueue_Initialize(&uvd->dp); + + /* Initialize video device structure */ + uvd->vdev = usbvideo_template; + sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName); + /* + * The client is free to overwrite those because we + * return control to the client's probe function right now. + */ +allocate_done: + mutex_unlock(&uvd->lock); + usbvideo_ClientDecModCount(uvd); + return uvd; +} + +EXPORT_SYMBOL(usbvideo_AllocateDevice); + +int usbvideo_RegisterVideoDevice(struct uvd *uvd) +{ + char tmp1[20], tmp2[20]; /* Buffers for printing */ + + if (uvd == NULL) { + err("%s: Illegal call.", __FUNCTION__); + return -EINVAL; + } + if (uvd->video_endp == 0) { + info("%s: No video endpoint specified; data pump disabled.", __FUNCTION__); + } + if (uvd->paletteBits == 0) { + err("%s: No palettes specified!", __FUNCTION__); + return -EINVAL; + } + if (uvd->defaultPalette == 0) { + info("%s: No default palette!", __FUNCTION__); + } + + uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) * + VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL; + usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize); + usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas); + + if (uvd->debug > 0) { + info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx", + __FUNCTION__, uvd->iface, uvd->video_endp, uvd->paletteBits); + } + if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + err("%s: video_register_device failed", __FUNCTION__); + return -EPIPE; + } + if (uvd->debug > 1) { + info("%s: video_register_device() successful", __FUNCTION__); + } + if (uvd->dev == NULL) { + err("%s: uvd->dev == NULL", __FUNCTION__); + return -EINVAL; + } + + info("%s on /dev/video%d: canvas=%s videosize=%s", + (uvd->handle != NULL) ? uvd->handle->drvName : "???", + uvd->vdev.minor, tmp2, tmp1); + + usb_get_dev(uvd->dev); + return 0; +} + +EXPORT_SYMBOL(usbvideo_RegisterVideoDevice); + +/* ******************************************************************** */ + +static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct uvd *uvd = file->private_data; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return -EFAULT; + + if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) + return -EINVAL; + + pos = (unsigned long) uvd->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + return 0; +} + +/* + * usbvideo_v4l_open() + * + * This is part of Video 4 Linux API. The driver can be opened by one + * client only (checks internal counter 'uvdser'). The procedure + * then allocates buffers needed for video processing. + * + * History: + * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the + * camera is also initialized here (once per connect), at + * expense of V4L client (it waits on open() call). + * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers. + * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT). + */ +static int usbvideo_v4l_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct uvd *uvd = (struct uvd *) dev; + const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len; + int i, errCode = 0; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, dev); + + usbvideo_ClientIncModCount(uvd); + mutex_lock(&uvd->lock); + + if (uvd->user) { + err("%s: Someone tried to open an already opened device!", __FUNCTION__); + errCode = -EBUSY; + } else { + /* Clear statistics */ + memset(&uvd->stats, 0, sizeof(uvd->stats)); + + /* Clean pointers so we know if we allocated something */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) + uvd->sbuf[i].data = NULL; + + /* Allocate memory for the frame buffers */ + uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size; + uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size); + RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE); + if ((uvd->fbuf == NULL) || + (!RingQueue_IsAllocated(&uvd->dp))) { + err("%s: Failed to allocate fbuf or dp", __FUNCTION__); + errCode = -ENOMEM; + } else { + /* Allocate all buffers */ + for (i=0; i < USBVIDEO_NUMFRAMES; i++) { + uvd->frame[i].frameState = FrameState_Unused; + uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size); + /* + * Set default sizes in case IOCTL (VIDIOCMCAPTURE) + * is not used (using read() instead). + */ + uvd->frame[i].canvas = uvd->canvas; + uvd->frame[i].seqRead_Index = 0; + } + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL); + if (uvd->sbuf[i].data == NULL) { + errCode = -ENOMEM; + break; + } + } + } + if (errCode != 0) { + /* Have to free all that memory */ + if (uvd->fbuf != NULL) { + usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size); + uvd->fbuf = NULL; + } + RingQueue_Free(&uvd->dp); + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + kfree(uvd->sbuf[i].data); + uvd->sbuf[i].data = NULL; + } + } + } + + /* If so far no errors then we shall start the camera */ + if (errCode == 0) { + /* Start data pump if we have valid endpoint */ + if (uvd->video_endp != 0) + errCode = GET_CALLBACK(uvd, startDataPump)(uvd); + if (errCode == 0) { + if (VALID_CALLBACK(uvd, setupOnOpen)) { + if (uvd->debug > 1) + info("%s: setupOnOpen callback", __FUNCTION__); + errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd); + if (errCode < 0) { + err("%s: setupOnOpen callback failed (%d.).", + __FUNCTION__, errCode); + } else if (uvd->debug > 1) { + info("%s: setupOnOpen callback successful", __FUNCTION__); + } + } + if (errCode == 0) { + uvd->settingsAdjusted = 0; + if (uvd->debug > 1) + info("%s: Open succeeded.", __FUNCTION__); + uvd->user++; + file->private_data = uvd; + } + } + } + mutex_unlock(&uvd->lock); + if (errCode != 0) + usbvideo_ClientDecModCount(uvd); + if (uvd->debug > 0) + info("%s: Returning %d.", __FUNCTION__, errCode); + return errCode; +} + +/* + * usbvideo_v4l_close() + * + * This is part of Video 4 Linux API. The procedure + * stops streaming and deallocates all buffers that were earlier + * allocated in usbvideo_v4l_open(). + * + * History: + * 22-Jan-2000 Moved scratch buffer deallocation here. + * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers. + * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep. + */ +static int usbvideo_v4l_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = file->private_data; + struct uvd *uvd = (struct uvd *) dev; + int i; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, dev); + + mutex_lock(&uvd->lock); + GET_CALLBACK(uvd, stopDataPump)(uvd); + usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size); + uvd->fbuf = NULL; + RingQueue_Free(&uvd->dp); + + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + kfree(uvd->sbuf[i].data); + uvd->sbuf[i].data = NULL; + } + +#if USBVIDEO_REPORT_STATS + usbvideo_ReportStatistics(uvd); +#endif + + uvd->user--; + if (uvd->remove_pending) { + if (uvd->debug > 0) + info("usbvideo_v4l_close: Final disconnect."); + usbvideo_CameraRelease(uvd); + } + mutex_unlock(&uvd->lock); + usbvideo_ClientDecModCount(uvd); + + if (uvd->debug > 1) + info("%s: Completed.", __FUNCTION__); + file->private_data = NULL; + return 0; +} + +/* + * usbvideo_v4l_ioctl() + * + * This is part of Video 4 Linux API. The procedure handles ioctl() calls. + * + * History: + * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings. + */ +static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct uvd *uvd = file->private_data; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + *b = uvd->vcap; + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + *v = uvd->vchan; + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + if (v->channel != 0) + return -EINVAL; + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *pic = arg; + *pic = uvd->vpic; + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *pic = arg; + /* + * Use temporary 'video_picture' structure to preserve our + * own settings (such as color depth, palette) that we + * aren't allowing everyone (V4L client) to change. + */ + uvd->vpic.brightness = pic->brightness; + uvd->vpic.hue = pic->hue; + uvd->vpic.colour = pic->colour; + uvd->vpic.contrast = pic->contrast; + uvd->settingsAdjusted = 0; /* Will force new settings */ + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + + if(VALID_CALLBACK(uvd, setVideoMode)) { + return GET_CALLBACK(uvd, setVideoMode)(uvd, vw); + } + + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (vw->width != VIDEOSIZE_X(uvd->canvas)) + return -EINVAL; + if (vw->height != VIDEOSIZE_Y(uvd->canvas)) + return -EINVAL; + + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + vw->x = 0; + vw->y = 0; + vw->width = VIDEOSIZE_X(uvd->videosize); + vw->height = VIDEOSIZE_Y(uvd->videosize); + vw->chromakey = 0; + if (VALID_CALLBACK(uvd, getFPS)) + vw->flags = GET_CALLBACK(uvd, getFPS)(uvd); + else + vw->flags = 10; /* FIXME: do better! */ + return 0; + } + case VIDIOCGMBUF: + { + struct video_mbuf *vm = arg; + int i; + + memset(vm, 0, sizeof(*vm)); + vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES; + vm->frames = USBVIDEO_NUMFRAMES; + for(i = 0; i < USBVIDEO_NUMFRAMES; i++) + vm->offsets[i] = i * uvd->max_frame_size; + + return 0; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *vm = arg; + + if (uvd->debug >= 1) { + info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.", + vm->frame, vm->width, vm->height, vm->format); + } + /* + * Check if the requested size is supported. If the requestor + * requests too big a frame then we may be tricked into accessing + * outside of own preallocated frame buffer (in uvd->frame). + * This will cause oops or a security hole. Theoretically, we + * could only clamp the size down to acceptable bounds, but then + * we'd need to figure out how to insert our smaller buffer into + * larger caller's buffer... this is not an easy question. So we + * here just flatly reject too large requests, assuming that the + * caller will resubmit with smaller size. Callers should know + * what size we support (returned by VIDIOCGCAP). However vidcat, + * for one, does not care and allows to ask for any size. + */ + if ((vm->width > VIDEOSIZE_X(uvd->canvas)) || + (vm->height > VIDEOSIZE_Y(uvd->canvas))) { + if (uvd->debug > 0) { + info("VIDIOCMCAPTURE: Size=%dx%d too large; " + "allowed only up to %ldx%ld", vm->width, vm->height, + VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas)); + } + return -EINVAL; + } + /* Check if the palette is supported */ + if (((1L << vm->format) & uvd->paletteBits) == 0) { + if (uvd->debug > 0) { + info("VIDIOCMCAPTURE: format=%d. not supported" + " (paletteBits=$%08lx)", + vm->format, uvd->paletteBits); + } + return -EINVAL; + } + if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) { + err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1); + return -EINVAL; + } + if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) { + /* Not an error - can happen */ + } + uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height); + uvd->frame[vm->frame].palette = vm->format; + + /* Mark it as ready */ + uvd->frame[vm->frame].frameState = FrameState_Ready; + + return usbvideo_NewFrame(uvd, vm->frame); + } + case VIDIOCSYNC: + { + int *frameNum = arg; + int ret; + + if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES) + return -EINVAL; + + if (uvd->debug >= 1) + info("VIDIOCSYNC: syncing to frame %d.", *frameNum); + if (uvd->flags & FLAGS_NO_DECODING) + ret = usbvideo_GetFrame(uvd, *frameNum); + else if (VALID_CALLBACK(uvd, getFrame)) { + ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum); + if ((ret < 0) && (uvd->debug >= 1)) { + err("VIDIOCSYNC: getFrame() returned %d.", ret); + } + } else { + err("VIDIOCSYNC: getFrame is not set"); + ret = -EFAULT; + } + + /* + * The frame is in FrameState_Done_Hold state. Release it + * right now because its data is already mapped into + * the user space and it's up to the application to + * make use of it until it asks for another frame. + */ + uvd->frame[*frameNum].frameState = FrameState_Unused; + return ret; + } + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + memset(vb, 0, sizeof(*vb)); + return 0; + } + case VIDIOCKEY: + return 0; + + case VIDIOCCAPTURE: + return -EINVAL; + + case VIDIOCSFBUF: + + case VIDIOCGTUNER: + case VIDIOCSTUNER: + + case VIDIOCGFREQ: + case VIDIOCSFREQ: + + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usbvideo_v4l_do_ioctl); +} + +/* + * usbvideo_v4l_read() + * + * This is mostly boring stuff. We simply ask for a frame and when it + * arrives copy all the video data from it into user space. There is + * no obvious need to override this method. + * + * History: + * 20-Oct-2000 Created. + * 01-Nov-2000 Added mutex (uvd->lock). + */ +static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct uvd *uvd = file->private_data; + int noblock = file->f_flags & O_NONBLOCK; + int frmx = -1, i; + struct usbvideo_frame *frame; + + if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL)) + return -EFAULT; + + if (uvd->debug >= 1) + info("%s: %Zd. bytes, noblock=%d.", __FUNCTION__, count, noblock); + + mutex_lock(&uvd->lock); + + /* See if a frame is completed, then use it. */ + for(i = 0; i < USBVIDEO_NUMFRAMES; i++) { + if ((uvd->frame[i].frameState == FrameState_Done) || + (uvd->frame[i].frameState == FrameState_Done_Hold) || + (uvd->frame[i].frameState == FrameState_Error)) { + frmx = i; + break; + } + } + + /* FIXME: If we don't start a frame here then who ever does? */ + if (noblock && (frmx == -1)) { + count = -EAGAIN; + goto read_done; + } + + /* + * If no FrameState_Done, look for a FrameState_Grabbing state. + * See if a frame is in process (grabbing), then use it. + * We will need to wait until it becomes cooked, of course. + */ + if (frmx == -1) { + for(i = 0; i < USBVIDEO_NUMFRAMES; i++) { + if (uvd->frame[i].frameState == FrameState_Grabbing) { + frmx = i; + break; + } + } + } + + /* + * If no frame is active, start one. We don't care which one + * it will be, so #0 is as good as any. + * In read access mode we don't have convenience of VIDIOCMCAPTURE + * to specify the requested palette (video format) on per-frame + * basis. This means that we have to return data in -some- format + * and just hope that the client knows what to do with it. + * The default format is configured in uvd->defaultPalette field + * as one of VIDEO_PALETTE_xxx values. We stuff it into the new + * frame and initiate the frame filling process. + */ + if (frmx == -1) { + if (uvd->defaultPalette == 0) { + err("%s: No default palette; don't know what to do!", __FUNCTION__); + count = -EFAULT; + goto read_done; + } + frmx = 0; + /* + * We have no per-frame control over video size. + * Therefore we only can use whatever size was + * specified as default. + */ + uvd->frame[frmx].request = uvd->videosize; + uvd->frame[frmx].palette = uvd->defaultPalette; + uvd->frame[frmx].frameState = FrameState_Ready; + usbvideo_NewFrame(uvd, frmx); + /* Now frame 0 is supposed to start filling... */ + } + + /* + * Get a pointer to the active frame. It is either previously + * completed frame or frame in progress but not completed yet. + */ + frame = &uvd->frame[frmx]; + + /* + * Sit back & wait until the frame gets filled and postprocessed. + * If we fail to get the picture [in time] then return the error. + * In this call we specify that we want the frame to be waited for, + * postprocessed and switched into FrameState_Done_Hold state. This + * state is used to hold the frame as "fully completed" between + * subsequent partial reads of the same frame. + */ + if (frame->frameState != FrameState_Done_Hold) { + long rv = -EFAULT; + if (uvd->flags & FLAGS_NO_DECODING) + rv = usbvideo_GetFrame(uvd, frmx); + else if (VALID_CALLBACK(uvd, getFrame)) + rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx); + else + err("getFrame is not set"); + if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) { + count = rv; + goto read_done; + } + } + + /* + * Copy bytes to user space. We allow for partial reads, which + * means that the user application can request read less than + * the full frame size. It is up to the application to issue + * subsequent calls until entire frame is read. + * + * First things first, make sure we don't copy more than we + * have - even if the application wants more. That would be + * a big security embarassment! + */ + if ((count + frame->seqRead_Index) > frame->seqRead_Length) + count = frame->seqRead_Length - frame->seqRead_Index; + + /* + * Copy requested amount of data to user space. We start + * copying from the position where we last left it, which + * will be zero for a new frame (not read before). + */ + if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) { + count = -EFAULT; + goto read_done; + } + + /* Update last read position */ + frame->seqRead_Index += count; + if (uvd->debug >= 1) { + err("%s: {copy} count used=%Zd, new seqRead_Index=%ld", + __FUNCTION__, count, frame->seqRead_Index); + } + + /* Finally check if the frame is done with and "release" it */ + if (frame->seqRead_Index >= frame->seqRead_Length) { + /* All data has been read */ + frame->seqRead_Index = 0; + + /* Mark it as available to be used again. */ + uvd->frame[frmx].frameState = FrameState_Unused; + if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) { + err("%s: usbvideo_NewFrame failed.", __FUNCTION__); + } + } +read_done: + mutex_unlock(&uvd->lock); + return count; +} + +/* + * Make all of the blocks of data contiguous + */ +static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb) +{ + char *cdata; + int i, totlen = 0; + + for (i = 0; i < urb->number_of_packets; i++) { + int n = urb->iso_frame_desc[i].actual_length; + int st = urb->iso_frame_desc[i].status; + + cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + /* Detect and ignore errored packets */ + if (st < 0) { + if (uvd->debug >= 1) + err("Data error: packet=%d. len=%d. status=%d.", i, n, st); + uvd->stats.iso_err_count++; + continue; + } + + /* Detect and ignore empty packets */ + if (n <= 0) { + uvd->stats.iso_skip_count++; + continue; + } + totlen += n; /* Little local accounting */ + RingQueue_Enqueue(&uvd->dp, cdata, n); + } + return totlen; +} + +static void usbvideo_IsocIrq(struct urb *urb, struct pt_regs *regs) +{ + int i, ret, len; + struct uvd *uvd = urb->context; + + /* We don't want to do anything if we are about to be removed! */ + if (!CAMERA_IS_OPERATIONAL(uvd)) + return; +#if 0 + if (urb->actual_length > 0) { + info("urb=$%p status=%d. errcount=%d. length=%d.", + urb, urb->status, urb->error_count, urb->actual_length); + } else { + static int c = 0; + if (c++ % 100 == 0) + info("No Isoc data"); + } +#endif + + if (!uvd->streaming) { + if (uvd->debug >= 1) + info("Not streaming, but interrupt!"); + return; + } + + uvd->stats.urb_count++; + if (urb->actual_length <= 0) + goto urb_done_with; + + /* Copy the data received into ring queue */ + len = usbvideo_CompressIsochronous(uvd, urb); + uvd->stats.urb_length = len; + if (len <= 0) + goto urb_done_with; + + /* Here we got some data */ + uvd->stats.data_count += len; + RingQueue_WakeUpInterruptible(&uvd->dp); + +urb_done_with: + for (i = 0; i < FRAMES_PER_DESC; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + urb->status = 0; + urb->dev = uvd->dev; + ret = usb_submit_urb (urb, GFP_KERNEL); + if(ret) + err("usb_submit_urb error (%d)", ret); + return; +} + +/* + * usbvideo_StartDataPump() + * + * History: + * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead + * of hardcoded values. Simplified by using for loop, + * allowed any number of URBs. + */ +static int usbvideo_StartDataPump(struct uvd *uvd) +{ + struct usb_device *dev = uvd->dev; + int i, errFlag; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, uvd); + + if (!CAMERA_IS_OPERATIONAL(uvd)) { + err("%s: Camera is not operational", __FUNCTION__); + return -EFAULT; + } + uvd->curframe = -1; + + /* Alternate interface 1 is is the biggest frame size */ + i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive); + if (i < 0) { + err("%s: usb_set_interface error", __FUNCTION__); + uvd->last_error = i; + return -EBUSY; + } + if (VALID_CALLBACK(uvd, videoStart)) + GET_CALLBACK(uvd, videoStart)(uvd); + else + err("%s: videoStart not set", __FUNCTION__); + + /* We double buffer the Iso lists */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + int j, k; + struct urb *urb = uvd->sbuf[i].urb; + urb->dev = dev; + urb->context = uvd; + urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp); + urb->interval = 1; + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = uvd->sbuf[i].data; + urb->complete = usbvideo_IsocIrq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC; + for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = uvd->iso_packet_len; + } + } + + /* Submit all URBs */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); + if (errFlag) + err("%s: usb_submit_isoc(%d) ret %d", __FUNCTION__, i, errFlag); + } + + uvd->streaming = 1; + if (uvd->debug > 1) + info("%s: streaming=1 video_endp=$%02x", __FUNCTION__, uvd->video_endp); + return 0; +} + +/* + * usbvideo_StopDataPump() + * + * This procedure stops streaming and deallocates URBs. Then it + * activates zero-bandwidth alt. setting of the video interface. + * + * History: + * 22-Jan-2000 Corrected order of actions to work after surprise removal. + * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values. + */ +static void usbvideo_StopDataPump(struct uvd *uvd) +{ + int i, j; + + if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL)) + return; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, uvd); + + /* Unschedule all of the iso td's */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + usb_kill_urb(uvd->sbuf[i].urb); + } + if (uvd->debug > 1) + info("%s: streaming=0", __FUNCTION__); + uvd->streaming = 0; + + if (!uvd->remove_pending) { + /* Invoke minidriver's magic to stop the camera */ + if (VALID_CALLBACK(uvd, videoStop)) + GET_CALLBACK(uvd, videoStop)(uvd); + else + err("%s: videoStop not set", __FUNCTION__); + + /* Set packet size to 0 */ + j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive); + if (j < 0) { + err("%s: usb_set_interface() error %d.", __FUNCTION__, j); + uvd->last_error = j; + } + } +} + +/* + * usbvideo_NewFrame() + * + * History: + * 29-Mar-00 Added copying of previous frame into the current one. + * 6-Aug-00 Added model 3 video sizes, removed redundant width, height. + */ +static int usbvideo_NewFrame(struct uvd *uvd, int framenum) +{ + struct usbvideo_frame *frame; + int n; + + if (uvd->debug > 1) + info("usbvideo_NewFrame($%p,%d.)", uvd, framenum); + + /* If we're not grabbing a frame right now and the other frame is */ + /* ready to be grabbed into, then use it instead */ + if (uvd->curframe != -1) + return 0; + + /* If necessary we adjust picture settings between frames */ + if (!uvd->settingsAdjusted) { + if (VALID_CALLBACK(uvd, adjustPicture)) + GET_CALLBACK(uvd, adjustPicture)(uvd); + uvd->settingsAdjusted = 1; + } + + n = (framenum + 1) % USBVIDEO_NUMFRAMES; + if (uvd->frame[n].frameState == FrameState_Ready) + framenum = n; + + frame = &uvd->frame[framenum]; + + frame->frameState = FrameState_Grabbing; + frame->scanstate = ScanState_Scanning; + frame->seqRead_Length = 0; /* Accumulated in xxx_parse_data() */ + frame->deinterlace = Deinterlace_None; + frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */ + uvd->curframe = framenum; + + /* + * Normally we would want to copy previous frame into the current one + * before we even start filling it with data; this allows us to stop + * filling at any moment; top portion of the frame will be new and + * bottom portion will stay as it was in previous frame. If we don't + * do that then missing chunks of video stream will result in flickering + * portions of old data whatever it was before. + * + * If we choose not to copy previous frame (to, for example, save few + * bus cycles - the frame can be pretty large!) then we have an option + * to clear the frame before using. If we experience losses in this + * mode then missing picture will be black (no flickering). + * + * Finally, if user chooses not to clean the current frame before + * filling it with data then the old data will be visible if we fail + * to refill entire frame with new data. + */ + if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) { + /* This copies previous frame into this one to mask losses */ + int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES; + memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size); + } else { + if (uvd->flags & FLAGS_CLEAN_FRAMES) { + /* This provides a "clean" frame but slows things down */ + memset(frame->data, 0, uvd->max_frame_size); + } + } + return 0; +} + +/* + * usbvideo_CollectRawData() + * + * This procedure can be used instead of 'processData' callback if you + * only want to dump the raw data from the camera into the output + * device (frame buffer). You can look at it with V4L client, but the + * image will be unwatchable. The main purpose of this code and of the + * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from + * new, unknown cameras. This procedure will be automatically invoked + * instead of the specified callback handler when uvd->flags has bit + * FLAGS_NO_DECODING set. Therefore, any regular build of any driver + * based on usbvideo can use this feature at any time. + */ +static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame) +{ + int n; + + assert(uvd != NULL); + assert(frame != NULL); + + /* Try to move data from queue into frame buffer */ + n = RingQueue_GetLength(&uvd->dp); + if (n > 0) { + int m; + /* See how much space we have left */ + m = uvd->max_frame_size - frame->seqRead_Length; + if (n > m) + n = m; + /* Now move that much data into frame buffer */ + RingQueue_Dequeue( + &uvd->dp, + frame->data + frame->seqRead_Length, + m); + frame->seqRead_Length += m; + } + /* See if we filled the frame */ + if (frame->seqRead_Length >= uvd->max_frame_size) { + frame->frameState = FrameState_Done; + uvd->curframe = -1; + uvd->stats.frame_num++; + } +} + +static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) +{ + struct usbvideo_frame *frame = &uvd->frame[frameNum]; + + if (uvd->debug >= 2) + info("%s($%p,%d.)", __FUNCTION__, uvd, frameNum); + + switch (frame->frameState) { + case FrameState_Unused: + if (uvd->debug >= 2) + info("%s: FrameState_Unused", __FUNCTION__); + return -EINVAL; + case FrameState_Ready: + case FrameState_Grabbing: + case FrameState_Error: + { + int ntries, signalPending; + redo: + if (!CAMERA_IS_OPERATIONAL(uvd)) { + if (uvd->debug >= 2) + info("%s: Camera is not operational (1)", __FUNCTION__); + return -EIO; + } + ntries = 0; + do { + RingQueue_InterruptibleSleepOn(&uvd->dp); + signalPending = signal_pending(current); + if (!CAMERA_IS_OPERATIONAL(uvd)) { + if (uvd->debug >= 2) + info("%s: Camera is not operational (2)", __FUNCTION__); + return -EIO; + } + assert(uvd->fbuf != NULL); + if (signalPending) { + if (uvd->debug >= 2) + info("%s: Signal=$%08x", __FUNCTION__, signalPending); + if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) { + usbvideo_TestPattern(uvd, 1, 0); + uvd->curframe = -1; + uvd->stats.frame_num++; + if (uvd->debug >= 2) + info("%s: Forced test pattern screen", __FUNCTION__); + return 0; + } else { + /* Standard answer: Interrupted! */ + if (uvd->debug >= 2) + info("%s: Interrupted!", __FUNCTION__); + return -EINTR; + } + } else { + /* No signals - we just got new data in dp queue */ + if (uvd->flags & FLAGS_NO_DECODING) + usbvideo_CollectRawData(uvd, frame); + else if (VALID_CALLBACK(uvd, processData)) + GET_CALLBACK(uvd, processData)(uvd, frame); + else + err("%s: processData not set", __FUNCTION__); + } + } while (frame->frameState == FrameState_Grabbing); + if (uvd->debug >= 2) { + info("%s: Grabbing done; state=%d. (%lu. bytes)", + __FUNCTION__, frame->frameState, frame->seqRead_Length); + } + if (frame->frameState == FrameState_Error) { + int ret = usbvideo_NewFrame(uvd, frameNum); + if (ret < 0) { + err("%s: usbvideo_NewFrame() failed (%d.)", __FUNCTION__, ret); + return ret; + } + goto redo; + } + /* Note that we fall through to meet our destiny below */ + } + case FrameState_Done: + /* + * Do all necessary postprocessing of data prepared in + * "interrupt" code and the collecting code above. The + * frame gets marked as FrameState_Done by queue parsing code. + * This status means that we collected enough data and + * most likely processed it as we went through. However + * the data may need postprocessing, such as deinterlacing + * or picture adjustments implemented in software (horror!) + * + * As soon as the frame becomes "final" it gets promoted to + * FrameState_Done_Hold status where it will remain until the + * caller consumed all the video data from the frame. Then + * the empty shell of ex-frame is thrown out for dogs to eat. + * But we, worried about pets, will recycle the frame! + */ + uvd->stats.frame_num++; + if ((uvd->flags & FLAGS_NO_DECODING) == 0) { + if (VALID_CALLBACK(uvd, postProcess)) + GET_CALLBACK(uvd, postProcess)(uvd, frame); + if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST) + usbvideo_SoftwareContrastAdjustment(uvd, frame); + } + frame->frameState = FrameState_Done_Hold; + if (uvd->debug >= 2) + info("%s: Entered FrameState_Done_Hold state.", __FUNCTION__); + return 0; + + case FrameState_Done_Hold: + /* + * We stay in this state indefinitely until someone external, + * like ioctl() or read() call finishes digesting the frame + * data. Then it will mark the frame as FrameState_Unused and + * it will be released back into the wild to roam freely. + */ + if (uvd->debug >= 2) + info("%s: FrameState_Done_Hold state.", __FUNCTION__); + return 0; + } + + /* Catch-all for other cases. We shall not be here. */ + err("%s: Invalid state %d.", __FUNCTION__, frame->frameState); + frame->frameState = FrameState_Unused; + return 0; +} + +/* + * usbvideo_DeinterlaceFrame() + * + * This procedure deinterlaces the given frame. Some cameras produce + * only half of scanlines - sometimes only even lines, sometimes only + * odd lines. The deinterlacing method is stored in frame->deinterlace + * variable. + * + * Here we scan the frame vertically and replace missing scanlines with + * average between surrounding ones - before and after. If we have no + * line above then we just copy next line. Similarly, if we need to + * create a last line then preceding line is used. + */ +void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame) +{ + if ((uvd == NULL) || (frame == NULL)) + return; + + if ((frame->deinterlace == Deinterlace_FillEvenLines) || + (frame->deinterlace == Deinterlace_FillOddLines)) + { + const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1; + + for (; i < VIDEOSIZE_Y(frame->request); i += 2) { + const unsigned char *fs1, *fs2; + unsigned char *fd; + int ip, in, j; /* Previous and next lines */ + + /* + * Need to average lines before and after 'i'. + * If we go out of bounds seeking those lines then + * we point back to existing line. + */ + ip = i - 1; /* First, get rough numbers */ + in = i + 1; + + /* Now validate */ + if (ip < 0) + ip = in; + if (in >= VIDEOSIZE_Y(frame->request)) + in = ip; + + /* Sanity check */ + if ((ip < 0) || (in < 0) || + (ip >= VIDEOSIZE_Y(frame->request)) || + (in >= VIDEOSIZE_Y(frame->request))) + { + err("Error: ip=%d. in=%d. req.height=%ld.", + ip, in, VIDEOSIZE_Y(frame->request)); + break; + } + + /* Now we need to average lines 'ip' and 'in' to produce line 'i' */ + fs1 = frame->data + (v4l_linesize * ip); + fs2 = frame->data + (v4l_linesize * in); + fd = frame->data + (v4l_linesize * i); + + /* Average lines around destination */ + for (j=0; j < v4l_linesize; j++) { + fd[j] = (unsigned char)((((unsigned) fs1[j]) + + ((unsigned)fs2[j])) >> 1); + } + } + } + + /* Optionally display statistics on the screen */ + if (uvd->flags & FLAGS_OVERLAY_STATS) + usbvideo_OverlayStats(uvd, frame); +} + +EXPORT_SYMBOL(usbvideo_DeinterlaceFrame); + +/* + * usbvideo_SoftwareContrastAdjustment() + * + * This code adjusts the contrast of the frame, assuming RGB24 format. + * As most software image processing, this job is CPU-intensive. + * Get a camera that supports hardware adjustment! + * + * History: + * 09-Feb-2001 Created. + */ +static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd, + struct usbvideo_frame *frame) +{ + int i, j, v4l_linesize; + signed long adj; + const int ccm = 128; /* Color correction median - see below */ + + if ((uvd == NULL) || (frame == NULL)) { + err("%s: Illegal call.", __FUNCTION__); + return; + } + adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ + RESTRICT_TO_RANGE(adj, -ccm, ccm+1); + if (adj == 0) { + /* In rare case of no adjustment */ + return; + } + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + for (i=0; i < VIDEOSIZE_Y(frame->request); i++) { + unsigned char *fd = frame->data + (v4l_linesize * i); + for (j=0; j < v4l_linesize; j++) { + signed long v = (signed long) fd[j]; + /* Magnify up to 2 times, reduce down to zero */ + v = 128 + ((ccm + adj) * (v - 128)) / ccm; + RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */ + fd[j] = (unsigned char) v; + } + } +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h new file mode 100644 index 00000000000..135433c2680 --- /dev/null +++ b/drivers/media/video/usbvideo/usbvideo.h @@ -0,0 +1,394 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef usbvideo_h +#define usbvideo_h + +#include <linux/config.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +/* Most helpful debugging aid */ +#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) + +#define USBVIDEO_REPORT_STATS 1 /* Set to 0 to block statistics on close */ + +/* Bit flags (options) */ +#define FLAGS_RETRY_VIDIOCSYNC (1 << 0) +#define FLAGS_MONOCHROME (1 << 1) +#define FLAGS_DISPLAY_HINTS (1 << 2) +#define FLAGS_OVERLAY_STATS (1 << 3) +#define FLAGS_FORCE_TESTPATTERN (1 << 4) +#define FLAGS_SEPARATE_FRAMES (1 << 5) +#define FLAGS_CLEAN_FRAMES (1 << 6) +#define FLAGS_NO_DECODING (1 << 7) + +/* Bit flags for frames (apply to the frame where they are specified) */ +#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST (1 << 0) + +/* Camera capabilities (maximum) */ +#define CAMERA_URB_FRAMES 32 +#define CAMERA_MAX_ISO_PACKET 1023 /* 1022 actually sent by camera */ +#define FRAMES_PER_DESC (CAMERA_URB_FRAMES) +#define FRAME_SIZE_PER_DESC (CAMERA_MAX_ISO_PACKET) + +/* This macro restricts an int variable to an inclusive range */ +#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); } + +#define V4L_BYTES_PER_PIXEL 3 /* Because we produce RGB24 */ + +/* + * Use this macro to construct constants for different video sizes. + * We have to deal with different video sizes that have to be + * configured in the device or compared against when we receive + * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y + * #defines and that's the end of story. However this solution + * does not allow to convert between real pixel sizes and the + * constant (integer) value that may be used to tag a frame or + * whatever. The set of macros below constructs videosize constants + * from the pixel size and allows to reconstruct the pixel size + * from the combined value later. + */ +#define VIDEOSIZE(x,y) (((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16)) +#define VIDEOSIZE_X(vs) ((vs) & 0xFFFFL) +#define VIDEOSIZE_Y(vs) (((vs) >> 16) & 0xFFFFL) +typedef unsigned long videosize_t; + +/* + * This macro checks if the camera is still operational. The 'uvd' + * pointer must be valid, uvd->dev must be valid, we are not + * removing the device and the device has not erred on us. + */ +#define CAMERA_IS_OPERATIONAL(uvd) (\ + (uvd != NULL) && \ + ((uvd)->dev != NULL) && \ + ((uvd)->last_error == 0) && \ + (!(uvd)->remove_pending)) + +/* + * We use macros to do YUV -> RGB conversion because this is + * very important for speed and totally unimportant for size. + * + * YUV -> RGB Conversion + * --------------------- + * + * B = 1.164*(Y-16) + 2.018*(V-128) + * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128) + * R = 1.164*(Y-16) + 1.596*(U-128) + * + * If you fancy integer arithmetics (as you should), hear this: + * + * 65536*B = 76284*(Y-16) + 132252*(V-128) + * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128) + * 65536*R = 76284*(Y-16) + 104595*(U-128) + * + * Make sure the output values are within [0..255] range. + */ +#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x))) +#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \ + int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \ + mm_y = (my) - 16; \ + mm_u = (mu) - 128; \ + mm_v = (mv) - 128; \ + mm_yc= mm_y * 76284; \ + mm_b = (mm_yc + 132252*mm_v ) >> 16; \ + mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \ + mm_r = (mm_yc + 104595*mm_u ) >> 16; \ + mb = LIMIT_RGB(mm_b); \ + mg = LIMIT_RGB(mm_g); \ + mr = LIMIT_RGB(mm_r); \ +} + +#define RING_QUEUE_SIZE (128*1024) /* Must be a power of 2 */ +#define RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1) +#define RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n) +#define RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)]) + +struct RingQueue { + unsigned char *queue; /* Data from the Isoc data pump */ + int length; /* How many bytes allocated for the queue */ + int wi; /* That's where we write */ + int ri; /* Read from here until you hit write index */ + wait_queue_head_t wqh; /* Processes waiting */ +}; + +enum ScanState { + ScanState_Scanning, /* Scanning for header */ + ScanState_Lines /* Parsing lines */ +}; + +/* Completion states of the data parser */ +enum ParseState { + scan_Continue, /* Just parse next item */ + scan_NextFrame, /* Frame done, send it to V4L */ + scan_Out, /* Not enough data for frame */ + scan_EndParse /* End parsing */ +}; + +enum FrameState { + FrameState_Unused, /* Unused (no MCAPTURE) */ + FrameState_Ready, /* Ready to start grabbing */ + FrameState_Grabbing, /* In the process of being grabbed into */ + FrameState_Done, /* Finished grabbing, but not been synced yet */ + FrameState_Done_Hold, /* Are syncing or reading */ + FrameState_Error, /* Something bad happened while processing */ +}; + +/* + * Some frames may contain only even or odd lines. This type + * specifies what type of deinterlacing is required. + */ +enum Deinterlace { + Deinterlace_None=0, + Deinterlace_FillOddLines, + Deinterlace_FillEvenLines +}; + +#define USBVIDEO_NUMFRAMES 2 /* How many frames we work with */ +#define USBVIDEO_NUMSBUF 2 /* How many URBs linked in a ring */ + +/* This structure represents one Isoc request - URB and buffer */ +struct usbvideo_sbuf { + char *data; + struct urb *urb; +}; + +struct usbvideo_frame { + char *data; /* Frame buffer */ + unsigned long header; /* Significant bits from the header */ + + videosize_t canvas; /* The canvas (max. image) allocated */ + videosize_t request; /* That's what the application asked for */ + unsigned short palette; /* The desired format */ + + enum FrameState frameState;/* State of grabbing */ + enum ScanState scanstate; /* State of scanning */ + enum Deinterlace deinterlace; + int flags; /* USBVIDEO_FRAME_FLAG_xxx bit flags */ + + int curline; /* Line of frame we're working on */ + + long seqRead_Length; /* Raw data length of frame */ + long seqRead_Index; /* Amount of data that has been already read */ + + void *user; /* Additional data that user may need */ +}; + +/* Statistics that can be overlaid on screen */ +struct usbvideo_statistics { + unsigned long frame_num; /* Sequential number of the frame */ + unsigned long urb_count; /* How many URBs we received so far */ + unsigned long urb_length; /* Length of last URB */ + unsigned long data_count; /* How many bytes we received */ + unsigned long header_count; /* How many frame headers we found */ + unsigned long iso_skip_count; /* How many empty ISO packets received */ + unsigned long iso_err_count; /* How many bad ISO packets received */ +}; + +struct usbvideo; + +struct uvd { + struct video_device vdev; /* Must be the first field! */ + struct usb_device *dev; + struct usbvideo *handle; /* Points back to the struct usbvideo */ + void *user_data; /* Camera-dependent data */ + int user_size; /* Size of that camera-dependent data */ + int debug; /* Debug level for usbvideo */ + unsigned char iface; /* Video interface number */ + unsigned char video_endp; + unsigned char ifaceAltActive; + unsigned char ifaceAltInactive; /* Alt settings */ + unsigned long flags; /* FLAGS_USBVIDEO_xxx */ + unsigned long paletteBits; /* Which palettes we accept? */ + unsigned short defaultPalette; /* What palette to use for read() */ + struct mutex lock; + int user; /* user count for exclusive use */ + + videosize_t videosize; /* Current setting */ + videosize_t canvas; /* This is the width,height of the V4L canvas */ + int max_frame_size; /* Bytes in one video frame */ + + int uvd_used; /* Is this structure in use? */ + int streaming; /* Are we streaming Isochronous? */ + int grabbing; /* Are we grabbing? */ + int settingsAdjusted; /* Have we adjusted contrast etc.? */ + int last_error; /* What calamity struck us? */ + + char *fbuf; /* Videodev buffer area */ + int fbuf_size; /* Videodev buffer size */ + + int curframe; + int iso_packet_len; /* Videomode-dependent, saves bus bandwidth */ + + struct RingQueue dp; /* Isoc data pump */ + struct usbvideo_frame frame[USBVIDEO_NUMFRAMES]; + struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF]; + + volatile int remove_pending; /* If set then about to exit */ + + struct video_picture vpic, vpic_old; /* Picture settings */ + struct video_capability vcap; /* Video capabilities */ + struct video_channel vchan; /* May be used for tuner support */ + struct usbvideo_statistics stats; + char videoName[32]; /* Holds name like "video7" */ +}; + +/* + * usbvideo callbacks (virtual methods). They are set when usbvideo + * services are registered. All of these default to NULL, except those + * that default to usbvideo-provided methods. + */ +struct usbvideo_cb { + int (*probe)(struct usb_interface *, const struct usb_device_id *); + void (*userFree)(struct uvd *); + void (*disconnect)(struct usb_interface *); + int (*setupOnOpen)(struct uvd *); + void (*videoStart)(struct uvd *); + void (*videoStop)(struct uvd *); + void (*processData)(struct uvd *, struct usbvideo_frame *); + void (*postProcess)(struct uvd *, struct usbvideo_frame *); + void (*adjustPicture)(struct uvd *); + int (*getFPS)(struct uvd *); + int (*overlayHook)(struct uvd *, struct usbvideo_frame *); + int (*getFrame)(struct uvd *, int); + int (*startDataPump)(struct uvd *uvd); + void (*stopDataPump)(struct uvd *uvd); + int (*setVideoMode)(struct uvd *uvd, struct video_window *vw); +}; + +struct usbvideo { + int num_cameras; /* As allocated */ + struct usb_driver usbdrv; /* Interface to the USB stack */ + char drvName[80]; /* Driver name */ + struct mutex lock; /* Mutex protecting camera structures */ + struct usbvideo_cb cb; /* Table of callbacks (virtual methods) */ + struct video_device vdt; /* Video device template */ + struct uvd *cam; /* Array of camera structures */ + struct module *md_module; /* Minidriver module */ +}; + + +/* + * This macro retrieves callback address from the struct uvd object. + * No validity checks are done here, so be sure to check the + * callback beforehand with VALID_CALLBACK. + */ +#define GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName) + +/* + * This macro returns either callback pointer or NULL. This is safe + * macro, meaning that most of components of data structures involved + * may be NULL - this only results in NULL being returned. You may + * wish to use this macro to make sure that the callback is callable. + * However keep in mind that those checks take time. + */ +#define VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \ + ((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL) + +int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len); +int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n); +void RingQueue_WakeUpInterruptible(struct RingQueue *rq); +void RingQueue_Flush(struct RingQueue *rq); + +static inline int RingQueue_GetLength(const struct RingQueue *rq) +{ + return (rq->wi - rq->ri + rq->length) & (rq->length-1); +} + +static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq) +{ + return rq->length - RingQueue_GetLength(rq); +} + +void usbvideo_DrawLine( + struct usbvideo_frame *frame, + int x1, int y1, + int x2, int y2, + unsigned char cr, unsigned char cg, unsigned char cb); +void usbvideo_HexDump(const unsigned char *data, int len); +void usbvideo_SayAndWait(const char *what); +void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode); + +/* Memory allocation routines */ +unsigned long usbvideo_kvirt_to_pa(unsigned long adr); + +int usbvideo_register( + struct usbvideo **pCams, + const int num_cams, + const int num_extra, + const char *driverName, + const struct usbvideo_cb *cbTable, + struct module *md, + const struct usb_device_id *id_table); +struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams); +int usbvideo_RegisterVideoDevice(struct uvd *uvd); +void usbvideo_Deregister(struct usbvideo **uvt); + +int usbvideo_v4l_initialize(struct video_device *dev); + +void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame); + +/* + * This code performs bounds checking - use it when working with + * new formats, or else you may get oopses all over the place. + * If pixel falls out of bounds then it gets shoved back (as close + * to place of offence as possible) and is painted bright red. + * + * There are two important concepts: frame width, height and + * V4L canvas width, height. The former is the area requested by + * the application -for this very frame-. The latter is the largest + * possible frame that we can serve (we advertise that via V4L ioctl). + * The frame data is expected to be formatted as lines of length + * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines. + */ +static inline void RGB24_PUTPIXEL( + struct usbvideo_frame *fr, + int ix, int iy, + unsigned char vr, + unsigned char vg, + unsigned char vb) +{ + register unsigned char *pf; + int limiter = 0, mx, my; + mx = ix; + my = iy; + if (mx < 0) { + mx=0; + limiter++; + } else if (mx >= VIDEOSIZE_X((fr)->request)) { + mx= VIDEOSIZE_X((fr)->request) - 1; + limiter++; + } + if (my < 0) { + my = 0; + limiter++; + } else if (my >= VIDEOSIZE_Y((fr)->request)) { + my = VIDEOSIZE_Y((fr)->request) - 1; + limiter++; + } + pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix)); + if (limiter) { + *pf++ = 0; + *pf++ = 0; + *pf++ = 0xFF; + } else { + *pf++ = (vb); + *pf++ = (vg); + *pf++ = (vr); + } +} + +#endif /* usbvideo_h */ diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c new file mode 100644 index 00000000000..1d06e53ec7c --- /dev/null +++ b/drivers/media/video/usbvideo/vicam.c @@ -0,0 +1,1411 @@ +/* + * USB ViCam WebCam driver + * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), + * Christopher L Cheney (ccheney@cheney.cx), + * Pavel Machek (pavel@suse.cz), + * John Tyner (jtyner@cs.ucr.edu), + * Monroe Williams (monroe@pobox.com) + * + * Supports 3COM HomeConnect PC Digital WebCam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * This source code is based heavily on the CPiA webcam driver which was + * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt + * + * Portions of this code were also copied from usbvideo.c + * + * Special thanks to the the whole team at Sourceforge for help making + * this driver become a reality. Notably: + * Andy Armstrong who reverse engineered the color encoding and + * Pavel Machek and Chris Cheney who worked on reverse engineering the + * camera controls and wrote the first generation driver. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/mutex.h> +#include "usbvideo.h" + +// #define VICAM_DEBUG + +#ifdef VICAM_DEBUG +#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __FUNCTION__, lineno, ##args) +#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args) +#else +#define DBG(fmn,args...) do {} while(0) +#endif + +#define DRIVER_AUTHOR "Joe Burks, jburks@wavicle.org" +#define DRIVER_DESC "ViCam WebCam Driver" + +/* Define these values to match your device */ +#define USB_VICAM_VENDOR_ID 0x04c1 +#define USB_VICAM_PRODUCT_ID 0x009d + +#define VICAM_BYTES_PER_PIXEL 3 +#define VICAM_MAX_READ_SIZE (512*242+128) +#define VICAM_MAX_FRAME_SIZE (VICAM_BYTES_PER_PIXEL*320*240) +#define VICAM_FRAMES 2 + +#define VICAM_HEADER_SIZE 64 + +#define clamp( x, l, h ) max_t( __typeof__( x ), \ + ( l ), \ + min_t( __typeof__( x ), \ + ( h ), \ + ( x ) ) ) + +/* Not sure what all the bytes in these char + * arrays do, but they're necessary to make + * the camera work. + */ + +static unsigned char setup1[] = { + 0xB6, 0xC3, 0x1F, 0x00, 0x02, 0x64, 0xE7, 0x67, + 0xFD, 0xFF, 0x0E, 0xC0, 0xE7, 0x09, 0xDE, 0x00, + 0x8E, 0x00, 0xC0, 0x09, 0x40, 0x03, 0xC0, 0x17, + 0x44, 0x03, 0x4B, 0xAF, 0xC0, 0x07, 0x00, 0x00, + 0x4B, 0xAF, 0x97, 0xCF, 0x00, 0x00 +}; + +static unsigned char setup2[] = { + 0xB6, 0xC3, 0x03, 0x00, 0x03, 0x64, 0x18, 0x00, + 0x00, 0x00 +}; + +static unsigned char setup3[] = { + 0xB6, 0xC3, 0x01, 0x00, 0x06, 0x64, 0x00, 0x00 +}; + +static unsigned char setup4[] = { + 0xB6, 0xC3, 0x8F, 0x06, 0x02, 0x64, 0xE7, 0x07, + 0x00, 0x00, 0x08, 0xC0, 0xE7, 0x07, 0x00, 0x00, + 0x3E, 0xC0, 0xE7, 0x07, 0x54, 0x01, 0xAA, 0x00, + 0xE7, 0x07, 0xC8, 0x05, 0xB6, 0x00, 0xE7, 0x07, + 0x42, 0x01, 0xD2, 0x00, 0xE7, 0x07, 0x7C, 0x00, + 0x16, 0x00, 0xE7, 0x07, 0x56, 0x00, 0x18, 0x00, + 0xE7, 0x07, 0x06, 0x00, 0x92, 0xC0, 0xE7, 0x07, + 0x00, 0x00, 0x1E, 0xC0, 0xE7, 0x07, 0xFF, 0xFF, + 0x22, 0xC0, 0xE7, 0x07, 0x04, 0x00, 0x24, 0xC0, + 0xE7, 0x07, 0xEC, 0x27, 0x28, 0xC0, 0xE7, 0x07, + 0x16, 0x01, 0x8E, 0x00, 0xE7, 0x87, 0x01, 0x00, + 0x0E, 0xC0, 0x97, 0xCF, 0xD7, 0x09, 0x00, 0xC0, + 0xE7, 0x77, 0x01, 0x00, 0x92, 0xC0, 0x09, 0xC1, + 0xE7, 0x09, 0xFE, 0x05, 0x24, 0x01, 0xE7, 0x09, + 0x04, 0x06, 0x26, 0x01, 0xE7, 0x07, 0x07, 0x00, + 0x92, 0xC0, 0xE7, 0x05, 0x00, 0xC0, 0xC0, 0xDF, + 0x97, 0xCF, 0x17, 0x00, 0x57, 0x00, 0x17, 0x02, + 0xD7, 0x09, 0x00, 0xC0, 0xE7, 0x77, 0x01, 0x00, + 0x92, 0xC0, 0x0A, 0xC1, 0xE7, 0x57, 0xFF, 0xFF, + 0xFA, 0x05, 0x0D, 0xC0, 0xE7, 0x57, 0x00, 0x00, + 0xFA, 0x05, 0x0F, 0xC0, 0x9F, 0xAF, 0xC6, 0x00, + 0xE7, 0x05, 0x00, 0xC0, 0xC8, 0x05, 0xC1, 0x05, + 0xC0, 0x05, 0xC0, 0xDF, 0x97, 0xCF, 0x27, 0xDA, + 0xFA, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x0B, 0x06, + 0x73, 0xCF, 0x9F, 0xAF, 0x78, 0x01, 0x9F, 0xAF, + 0x1A, 0x03, 0x6E, 0xCF, 0xE7, 0x09, 0xFC, 0x05, + 0x24, 0x01, 0xE7, 0x09, 0x02, 0x06, 0x26, 0x01, + 0xE7, 0x07, 0x07, 0x00, 0x92, 0xC0, 0xE7, 0x09, + 0xFC, 0x05, 0xFE, 0x05, 0xE7, 0x09, 0x02, 0x06, + 0x04, 0x06, 0xE7, 0x09, 0x00, 0x06, 0xFC, 0x05, + 0xE7, 0x09, 0xFE, 0x05, 0x00, 0x06, 0x27, 0xDA, + 0xFA, 0x05, 0xE7, 0x57, 0x01, 0x00, 0xFA, 0x05, + 0x02, 0xCA, 0x04, 0xC0, 0x97, 0xCF, 0x9F, 0xAF, + 0x66, 0x05, 0x97, 0xCF, 0xE7, 0x07, 0x40, 0x00, + 0x02, 0x06, 0xC8, 0x09, 0xFC, 0x05, 0x9F, 0xAF, + 0xDA, 0x02, 0x97, 0xCF, 0xCF, 0x17, 0x02, 0x00, + 0xEF, 0x57, 0x81, 0x00, 0x09, 0x06, 0x9F, 0xA0, + 0xB6, 0x01, 0xEF, 0x57, 0x80, 0x00, 0x09, 0x06, + 0x9F, 0xA0, 0x40, 0x02, 0xEF, 0x57, 0x01, 0x00, + 0x0B, 0x06, 0x9F, 0xA0, 0x46, 0x03, 0xE7, 0x07, + 0x01, 0x00, 0x0A, 0xC0, 0x46, 0xAF, 0x47, 0xAF, + 0x9F, 0xAF, 0x40, 0x02, 0xE7, 0x07, 0x2E, 0x00, + 0x0A, 0xC0, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06, + 0x97, 0xCF, 0x00, 0x0E, 0x01, 0x00, 0xC0, 0x57, + 0x51, 0x00, 0x9F, 0xC0, 0x9E, 0x02, 0xC0, 0x57, + 0x50, 0x00, 0x20, 0xC0, 0xC0, 0x57, 0x55, 0x00, + 0x12, 0xC0, 0xC0, 0x57, 0x56, 0x00, 0x9F, 0xC0, + 0x72, 0x02, 0x9F, 0xCF, 0xD6, 0x02, 0xC1, 0x0B, + 0x08, 0x06, 0x01, 0xD0, 0x6F, 0x90, 0x08, 0x06, + 0xC0, 0x07, 0x08, 0x00, 0xC1, 0x0B, 0x08, 0x06, + 0x9F, 0xAF, 0x28, 0x05, 0x97, 0xCF, 0x2F, 0x0E, + 0x02, 0x00, 0x08, 0x06, 0xC0, 0x07, 0x08, 0x00, + 0xC1, 0x0B, 0x08, 0x06, 0x9F, 0xAF, 0x28, 0x05, + 0x9F, 0xCF, 0xD6, 0x02, 0x2F, 0x0E, 0x02, 0x00, + 0x09, 0x06, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06, + 0x9F, 0xCF, 0xD6, 0x02, 0xEF, 0x67, 0x7F, 0xFF, + 0x09, 0x06, 0xE7, 0x67, 0xFF, 0xFD, 0x22, 0xC0, + 0xE7, 0x67, 0xEF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, + 0x10, 0x00, 0x28, 0xC0, 0x9F, 0xAF, 0xB8, 0x05, + 0xE7, 0x87, 0xE0, 0x21, 0x24, 0xC0, 0x9F, 0xAF, + 0xA8, 0x05, 0xE7, 0x87, 0x08, 0x00, 0x24, 0xC0, + 0xE7, 0x67, 0xDF, 0xFF, 0x24, 0xC0, 0xC8, 0x07, + 0x0A, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xC1, 0x07, + 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0x9F, 0xAF, + 0xB8, 0x05, 0xC0, 0x07, 0x9E, 0x00, 0x9F, 0xAF, + 0x44, 0x05, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, + 0xC0, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01, + 0x24, 0xC0, 0xC0, 0x77, 0x00, 0x02, 0x0F, 0xC1, + 0xE7, 0x67, 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x67, + 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x08, 0x00, + 0x24, 0xC0, 0x08, 0xDA, 0x5E, 0xC1, 0xEF, 0x07, + 0x80, 0x00, 0x09, 0x06, 0x97, 0xCF, 0xEF, 0x07, + 0x01, 0x00, 0x0A, 0x06, 0x97, 0xCF, 0xEF, 0x07, + 0x00, 0x00, 0x0B, 0x06, 0xEF, 0x07, 0x00, 0x00, + 0x0A, 0x06, 0xEF, 0x67, 0x7F, 0xFF, 0x09, 0x06, + 0xEF, 0x07, 0x00, 0x00, 0x0D, 0x06, 0xE7, 0x67, + 0xEF, 0xFF, 0x28, 0xC0, 0xE7, 0x67, 0x17, 0xD8, + 0x24, 0xC0, 0xE7, 0x07, 0x00, 0x00, 0x1E, 0xC0, + 0xE7, 0x07, 0xFF, 0xFF, 0x22, 0xC0, 0x97, 0xCF, + 0xC8, 0x07, 0x0E, 0x06, 0x9F, 0xAF, 0xDA, 0x02, + 0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07, + 0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0x0E, 0x06, + 0xF4, 0x05, 0xE7, 0x07, 0xD6, 0x02, 0xF8, 0x05, + 0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80, + 0x50, 0xAF, 0x97, 0xCF, 0x2F, 0x0C, 0x02, 0x00, + 0x07, 0x06, 0x2F, 0x0C, 0x04, 0x00, 0x06, 0x06, + 0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07, + 0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0xE2, 0x05, + 0xF4, 0x05, 0xE7, 0x07, 0xCE, 0x02, 0xF8, 0x05, + 0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80, + 0x51, 0xAF, 0x97, 0xCF, 0x9F, 0xAF, 0x66, 0x04, + 0x9F, 0xAF, 0x1A, 0x03, 0x59, 0xAF, 0x97, 0xCF, + 0xC0, 0x07, 0x0E, 0x00, 0xC1, 0x0B, 0x0C, 0x06, + 0x41, 0xD1, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, + 0x3C, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0x68, 0x00, + 0xC0, 0x07, 0x3B, 0x00, 0x9F, 0xAF, 0x44, 0x05, + 0x6F, 0x00, 0x0C, 0x06, 0x68, 0x00, 0xE0, 0x07, + 0x04, 0x01, 0xE8, 0x0B, 0x0A, 0x06, 0xE8, 0x07, + 0x00, 0x00, 0xE0, 0x07, 0x00, 0x02, 0xE0, 0x07, + 0xEC, 0x01, 0xE0, 0x07, 0xFC, 0xFF, 0x97, 0xCF, + 0xE7, 0x07, 0xFF, 0xFF, 0xFA, 0x05, 0xEF, 0x07, + 0x00, 0x00, 0x0B, 0x06, 0xE7, 0x07, 0x0E, 0x06, + 0x24, 0x01, 0xE7, 0x07, 0x0E, 0x06, 0xFE, 0x05, + 0xE7, 0x07, 0x40, 0x00, 0x26, 0x01, 0xE7, 0x07, + 0x40, 0x00, 0x04, 0x06, 0xE7, 0x07, 0x07, 0x00, + 0x92, 0xC0, 0x97, 0xCF, 0xEF, 0x07, 0x02, 0x00, + 0x0B, 0x06, 0x9F, 0xAF, 0x78, 0x01, 0xEF, 0x77, + 0x80, 0x00, 0x07, 0x06, 0x9F, 0xC0, 0x14, 0x04, + 0xEF, 0x77, 0x01, 0x00, 0x07, 0x06, 0x37, 0xC0, + 0xEF, 0x77, 0x01, 0x00, 0x0D, 0x06, 0x0F, 0xC1, + 0xEF, 0x07, 0x01, 0x00, 0x0D, 0x06, 0xC0, 0x07, + 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, 0x9F, 0xAF, + 0x28, 0x05, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07, + 0x02, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, + 0xFF, 0x4F, 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, + 0x38, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x77, + 0x03, 0x00, 0x02, 0xC1, 0x08, 0xDA, 0x75, 0xC1, + 0xC1, 0x77, 0x01, 0x00, 0x0A, 0xC1, 0xC0, 0x07, + 0x01, 0x00, 0xC1, 0x07, 0x02, 0x00, 0x9F, 0xAF, + 0x28, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x06, 0x06, + 0x2C, 0xCF, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07, + 0x04, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xEF, 0x07, + 0x00, 0x00, 0x06, 0x06, 0x22, 0xCF, 0xEF, 0x07, + 0x00, 0x00, 0x0D, 0x06, 0xEF, 0x57, 0x01, 0x00, + 0x06, 0x06, 0x1B, 0xC0, 0xC0, 0x07, 0x01, 0x00, + 0xC1, 0x07, 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, + 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, + 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, 0xFF, 0x4F, + 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, 0x38, 0x00, + 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x67, 0x03, 0x00, + 0xC1, 0x57, 0x03, 0x00, 0x02, 0xC0, 0x08, 0xDA, + 0x73, 0xC1, 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, + 0x12, 0x00, 0xEF, 0x57, 0x00, 0x00, 0x06, 0x06, + 0x02, 0xC0, 0xC1, 0x07, 0x23, 0x00, 0x9F, 0xAF, + 0x28, 0x05, 0xC0, 0x07, 0x14, 0x00, 0xC1, 0x0B, + 0xEA, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, + 0x3E, 0x00, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x09, + 0xE4, 0x05, 0xFA, 0x05, 0x27, 0xD8, 0xFA, 0x05, + 0xE7, 0x07, 0x0E, 0x06, 0xFC, 0x05, 0xE7, 0x07, + 0x4E, 0x06, 0x00, 0x06, 0xE7, 0x07, 0x40, 0x00, + 0x02, 0x06, 0x9F, 0xAF, 0x66, 0x05, 0x9F, 0xAF, + 0xC6, 0x00, 0x97, 0xCF, 0xC1, 0x0B, 0xE2, 0x05, + 0x41, 0xD0, 0x01, 0xD2, 0xC1, 0x17, 0x23, 0x00, + 0x9F, 0xAF, 0xDC, 0x04, 0xC0, 0x07, 0x04, 0x00, + 0xC1, 0x0B, 0xE3, 0x05, 0x9F, 0xAF, 0x28, 0x05, + 0xC0, 0x07, 0x06, 0x00, 0xC1, 0x09, 0xE6, 0x05, + 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x07, 0x00, + 0xC1, 0x09, 0xE6, 0x05, 0xC1, 0xD1, 0x9F, 0xAF, + 0x28, 0x05, 0xC0, 0x07, 0x0B, 0x00, 0xC1, 0x09, + 0xE8, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, + 0x0C, 0x00, 0xC1, 0x09, 0xE8, 0x05, 0xC1, 0xD1, + 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0D, 0x00, + 0xC1, 0x07, 0x09, 0x00, 0x9F, 0xAF, 0x28, 0x05, + 0xC0, 0x07, 0x03, 0x00, 0xC1, 0x07, 0x32, 0x00, + 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0F, 0x00, + 0xC1, 0x07, 0x00, 0x00, 0x9F, 0xAF, 0x28, 0x05, + 0x97, 0xCF, 0xE7, 0x67, 0xFF, 0xD9, 0x24, 0xC0, + 0xC8, 0x07, 0x0A, 0x00, 0x40, 0x00, 0xC0, 0x67, + 0x00, 0x02, 0x27, 0x80, 0x24, 0xC0, 0xE7, 0x87, + 0x00, 0x04, 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xF9, + 0x24, 0xC0, 0x01, 0xD2, 0x08, 0xDA, 0x72, 0xC1, + 0xE7, 0x87, 0x00, 0x20, 0x24, 0xC0, 0x97, 0xCF, + 0x27, 0x00, 0x1E, 0xC0, 0xE7, 0x87, 0xFF, 0x00, + 0x22, 0xC0, 0xE7, 0x67, 0x7F, 0xFF, 0x24, 0xC0, + 0xE7, 0x87, 0x80, 0x00, 0x24, 0xC0, 0xE7, 0x87, + 0x80, 0x00, 0x24, 0xC0, 0x97, 0xCF, 0x9F, 0xAF, + 0x0A, 0x05, 0x67, 0x00, 0x1E, 0xC0, 0xE7, 0x67, + 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, + 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, + 0x97, 0xCF, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x67, + 0x00, 0xFF, 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, + 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, + 0xC1, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01, + 0x24, 0xC0, 0x97, 0xCF, 0xC0, 0x07, 0x40, 0x00, + 0xC8, 0x09, 0xFC, 0x05, 0xE7, 0x67, 0x00, 0xFF, + 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, + 0xE7, 0x67, 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x67, + 0xBF, 0xFF, 0x24, 0xC0, 0x00, 0xDA, 0xE8, 0x09, + 0x20, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, + 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, 0x00, 0xDA, + 0xE8, 0x09, 0x20, 0xC0, 0x6D, 0xC1, 0xE7, 0x87, + 0x00, 0x01, 0x24, 0xC0, 0x97, 0xCF, 0xE7, 0x07, + 0x32, 0x00, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80, + 0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0xE7, 0x07, + 0x20, 0x4E, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80, + 0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0x09, 0x02, + 0x19, 0x00, 0x01, 0x01, 0x00, 0x80, 0x96, 0x09, + 0x04, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x05, 0x81, 0x02, 0x40, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static unsigned char setup5[] = { + 0xB6, 0xC3, 0x2F, 0x01, 0x03, 0x64, 0x0E, 0x00, + 0x14, 0x00, 0x1A, 0x00, 0x20, 0x00, 0x26, 0x00, + 0x4A, 0x00, 0x64, 0x00, 0x6A, 0x00, 0x92, 0x00, + 0x9A, 0x00, 0xA0, 0x00, 0xB2, 0x00, 0xB8, 0x00, + 0xBE, 0x00, 0xC2, 0x00, 0xC8, 0x00, 0xCE, 0x00, + 0xDC, 0x00, 0xDA, 0x00, 0xE2, 0x00, 0xE0, 0x00, + 0xE8, 0x00, 0xE6, 0x00, 0xEE, 0x00, 0xEC, 0x00, + 0xF2, 0x00, 0xF8, 0x00, 0x02, 0x01, 0x0A, 0x01, + 0x0E, 0x01, 0x12, 0x01, 0x1E, 0x01, 0x22, 0x01, + 0x28, 0x01, 0x2C, 0x01, 0x32, 0x01, 0x36, 0x01, + 0x44, 0x01, 0x50, 0x01, 0x5E, 0x01, 0x72, 0x01, + 0x76, 0x01, 0x7A, 0x01, 0x80, 0x01, 0x88, 0x01, + 0x8C, 0x01, 0x94, 0x01, 0x9C, 0x01, 0xA0, 0x01, + 0xA4, 0x01, 0xAA, 0x01, 0xB0, 0x01, 0xB4, 0x01, + 0xBA, 0x01, 0xD0, 0x01, 0xDA, 0x01, 0xF6, 0x01, + 0xFA, 0x01, 0x02, 0x02, 0x34, 0x02, 0x3C, 0x02, + 0x44, 0x02, 0x4A, 0x02, 0x50, 0x02, 0x56, 0x02, + 0x74, 0x02, 0x78, 0x02, 0x7E, 0x02, 0x84, 0x02, + 0x8A, 0x02, 0x88, 0x02, 0x90, 0x02, 0x8E, 0x02, + 0x94, 0x02, 0xA2, 0x02, 0xA8, 0x02, 0xAE, 0x02, + 0xB4, 0x02, 0xBA, 0x02, 0xB8, 0x02, 0xC0, 0x02, + 0xBE, 0x02, 0xC4, 0x02, 0xD0, 0x02, 0xD4, 0x02, + 0xE0, 0x02, 0xE6, 0x02, 0xEE, 0x02, 0xF8, 0x02, + 0xFC, 0x02, 0x06, 0x03, 0x1E, 0x03, 0x24, 0x03, + 0x28, 0x03, 0x30, 0x03, 0x2E, 0x03, 0x3C, 0x03, + 0x4A, 0x03, 0x4E, 0x03, 0x54, 0x03, 0x58, 0x03, + 0x5E, 0x03, 0x66, 0x03, 0x6E, 0x03, 0x7A, 0x03, + 0x86, 0x03, 0x8E, 0x03, 0x96, 0x03, 0xB2, 0x03, + 0xB8, 0x03, 0xC6, 0x03, 0xCC, 0x03, 0xD4, 0x03, + 0xDA, 0x03, 0xE8, 0x03, 0xF4, 0x03, 0xFC, 0x03, + 0x04, 0x04, 0x20, 0x04, 0x2A, 0x04, 0x32, 0x04, + 0x36, 0x04, 0x3E, 0x04, 0x44, 0x04, 0x42, 0x04, + 0x48, 0x04, 0x4E, 0x04, 0x4C, 0x04, 0x54, 0x04, + 0x52, 0x04, 0x5A, 0x04, 0x5E, 0x04, 0x62, 0x04, + 0x68, 0x04, 0x74, 0x04, 0x7C, 0x04, 0x80, 0x04, + 0x88, 0x04, 0x8C, 0x04, 0x94, 0x04, 0x9A, 0x04, + 0xA2, 0x04, 0xA6, 0x04, 0xAE, 0x04, 0xB4, 0x04, + 0xC0, 0x04, 0xCC, 0x04, 0xD8, 0x04, 0x2A, 0x05, + 0x46, 0x05, 0x6C, 0x05, 0x00, 0x00 +}; + +/* rvmalloc / rvfree copied from usbvideo.c + * + * Not sure why these are not yet non-statics which I can reference through + * usbvideo.h the same as it is in 2.4.20. I bet this will get fixed sometime + * in the future. + * +*/ +static void *rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +struct vicam_camera { + u16 shutter_speed; // capture shutter speed + u16 gain; // capture gain + + u8 *raw_image; // raw data captured from the camera + u8 *framebuf; // processed data in RGB24 format + u8 *cntrlbuf; // area used to send control msgs + + struct video_device vdev; // v4l video device + struct usb_device *udev; // usb device + + /* guard against simultaneous accesses to the camera */ + struct mutex cam_lock; + + int is_initialized; + u8 open_count; + u8 bulkEndpoint; + int needsDummyRead; + +#if defined(CONFIG_VIDEO_PROC_FS) + struct proc_dir_entry *proc_dir; +#endif + +}; + +static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id); +static void vicam_disconnect(struct usb_interface *intf); +static void read_frame(struct vicam_camera *cam, int framenum); +static void vicam_decode_color(const u8 *, u8 *); + +static int __send_control_msg(struct vicam_camera *cam, + u8 request, + u16 value, + u16 index, + unsigned char *cp, + u16 size) +{ + int status; + + /* cp must be memory that has been allocated by kmalloc */ + + status = usb_control_msg(cam->udev, + usb_sndctrlpipe(cam->udev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, value, index, + cp, size, 1000); + + status = min(status, 0); + + if (status < 0) { + printk(KERN_INFO "Failed sending control message, error %d.\n", + status); + } + + return status; +} + +static int send_control_msg(struct vicam_camera *cam, + u8 request, + u16 value, + u16 index, + unsigned char *cp, + u16 size) +{ + int status = -ENODEV; + mutex_lock(&cam->cam_lock); + if (cam->udev) { + status = __send_control_msg(cam, request, value, + index, cp, size); + } + mutex_unlock(&cam->cam_lock); + return status; +} +static int +initialize_camera(struct vicam_camera *cam) +{ + const struct { + u8 *data; + u32 size; + } firmware[] = { + { .data = setup1, .size = sizeof(setup1) }, + { .data = setup2, .size = sizeof(setup2) }, + { .data = setup3, .size = sizeof(setup3) }, + { .data = setup4, .size = sizeof(setup4) }, + { .data = setup5, .size = sizeof(setup5) }, + { .data = setup3, .size = sizeof(setup3) }, + { .data = NULL, .size = 0 } + }; + + int err, i; + + for (i = 0, err = 0; firmware[i].data && !err; i++) { + memcpy(cam->cntrlbuf, firmware[i].data, firmware[i].size); + + err = send_control_msg(cam, 0xff, 0, 0, + cam->cntrlbuf, firmware[i].size); + } + + return err; +} + +static int +set_camera_power(struct vicam_camera *cam, int state) +{ + int status; + + if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0) + return status; + + if (state) { + send_control_msg(cam, 0x55, 1, 0, NULL, 0); + } + + return 0; +} + +static int +vicam_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, unsigned long arg) +{ + void __user *user_arg = (void __user *)arg; + struct vicam_camera *cam = file->private_data; + int retval = 0; + + if (!cam) + return -ENODEV; + + switch (ioctlnr) { + /* query capabilities */ + case VIDIOCGCAP: + { + struct video_capability b; + + DBG("VIDIOCGCAP\n"); + memset(&b, 0, sizeof(b)); + strcpy(b.name, "ViCam-based Camera"); + b.type = VID_TYPE_CAPTURE; + b.channels = 1; + b.audios = 0; + b.maxwidth = 320; /* VIDEOSIZE_CIF */ + b.maxheight = 240; + b.minwidth = 320; /* VIDEOSIZE_48_48 */ + b.minheight = 240; + + if (copy_to_user(user_arg, &b, sizeof(b))) + retval = -EFAULT; + + break; + } + /* get/set video source - we are a camera and nothing else */ + case VIDIOCGCHAN: + { + struct video_channel v; + + DBG("VIDIOCGCHAN\n"); + if (copy_from_user(&v, user_arg, sizeof(v))) { + retval = -EFAULT; + break; + } + if (v.channel != 0) { + retval = -EINVAL; + break; + } + + v.channel = 0; + strcpy(v.name, "Camera"); + v.tuners = 0; + v.flags = 0; + v.type = VIDEO_TYPE_CAMERA; + v.norm = 0; + + if (copy_to_user(user_arg, &v, sizeof(v))) + retval = -EFAULT; + break; + } + + case VIDIOCSCHAN: + { + int v; + + if (copy_from_user(&v, user_arg, sizeof(v))) + retval = -EFAULT; + DBG("VIDIOCSCHAN %d\n", v); + + if (retval == 0 && v != 0) + retval = -EINVAL; + + break; + } + + /* image properties */ + case VIDIOCGPICT: + { + struct video_picture vp; + DBG("VIDIOCGPICT\n"); + memset(&vp, 0, sizeof (struct video_picture)); + vp.brightness = cam->gain << 8; + vp.depth = 24; + vp.palette = VIDEO_PALETTE_RGB24; + if (copy_to_user(user_arg, &vp, sizeof (struct video_picture))) + retval = -EFAULT; + break; + } + + case VIDIOCSPICT: + { + struct video_picture vp; + + if (copy_from_user(&vp, user_arg, sizeof(vp))) { + retval = -EFAULT; + break; + } + + DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth, + vp.palette); + + cam->gain = vp.brightness >> 8; + + if (vp.depth != 24 + || vp.palette != VIDEO_PALETTE_RGB24) + retval = -EINVAL; + + break; + } + + /* get/set capture window */ + case VIDIOCGWIN: + { + struct video_window vw; + vw.x = 0; + vw.y = 0; + vw.width = 320; + vw.height = 240; + vw.chromakey = 0; + vw.flags = 0; + vw.clips = NULL; + vw.clipcount = 0; + + DBG("VIDIOCGWIN\n"); + + if (copy_to_user(user_arg, (void *)&vw, sizeof(vw))) + retval = -EFAULT; + + // I'm not sure what the deal with a capture window is, it is very poorly described + // in the doc. So I won't support it now. + break; + } + + case VIDIOCSWIN: + { + + struct video_window vw; + + if (copy_from_user(&vw, user_arg, sizeof(vw))) { + retval = -EFAULT; + break; + } + + DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height); + + if ( vw.width != 320 || vw.height != 240 ) + retval = -EFAULT; + + break; + } + + /* mmap interface */ + case VIDIOCGMBUF: + { + struct video_mbuf vm; + int i; + + DBG("VIDIOCGMBUF\n"); + memset(&vm, 0, sizeof (vm)); + vm.size = + VICAM_MAX_FRAME_SIZE * VICAM_FRAMES; + vm.frames = VICAM_FRAMES; + for (i = 0; i < VICAM_FRAMES; i++) + vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i; + + if (copy_to_user(user_arg, (void *)&vm, sizeof(vm))) + retval = -EFAULT; + + break; + } + + case VIDIOCMCAPTURE: + { + struct video_mmap vm; + // int video_size; + + if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) { + retval = -EFAULT; + break; + } + + DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format); + + if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 ) + retval = -EINVAL; + + // in theory right here we'd start the image capturing + // (fill in a bulk urb and submit it asynchronously) + // + // Instead we're going to do a total hack job for now and + // retrieve the frame in VIDIOCSYNC + + break; + } + + case VIDIOCSYNC: + { + int frame; + + if (copy_from_user((void *)&frame, user_arg, sizeof(int))) { + retval = -EFAULT; + break; + } + DBG("VIDIOCSYNC: %d\n", frame); + + read_frame(cam, frame); + vicam_decode_color(cam->raw_image, + cam->framebuf + + frame * VICAM_MAX_FRAME_SIZE ); + + break; + } + + /* pointless to implement overlay with this camera */ + case VIDIOCCAPTURE: + case VIDIOCGFBUF: + case VIDIOCSFBUF: + case VIDIOCKEY: + retval = -EINVAL; + break; + + /* tuner interface - we have none */ + case VIDIOCGTUNER: + case VIDIOCSTUNER: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + retval = -EINVAL; + break; + + /* audio interface - we have none */ + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + retval = -EINVAL; + break; + default: + retval = -ENOIOCTLCMD; + break; + } + + return retval; +} + +static int +vicam_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct vicam_camera *cam = + (struct vicam_camera *) dev->priv; + DBG("open\n"); + + if (!cam) { + printk(KERN_ERR + "vicam video_device improperly initialized"); + return -EINVAL; + } + + /* the videodev_lock held above us protects us from + * simultaneous opens...for now. we probably shouldn't + * rely on this fact forever. + */ + + if (cam->open_count > 0) { + printk(KERN_INFO + "vicam_open called on already opened camera"); + return -EBUSY; + } + + cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL); + if (!cam->raw_image) { + return -ENOMEM; + } + + cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + if (!cam->framebuf) { + kfree(cam->raw_image); + return -ENOMEM; + } + + cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!cam->cntrlbuf) { + kfree(cam->raw_image); + rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + return -ENOMEM; + } + + // First upload firmware, then turn the camera on + + if (!cam->is_initialized) { + initialize_camera(cam); + + cam->is_initialized = 1; + } + + set_camera_power(cam, 1); + + cam->needsDummyRead = 1; + cam->open_count++; + + file->private_data = cam; + + return 0; +} + +static int +vicam_close(struct inode *inode, struct file *file) +{ + struct vicam_camera *cam = file->private_data; + int open_count; + struct usb_device *udev; + + DBG("close\n"); + + /* it's not the end of the world if + * we fail to turn the camera off. + */ + + set_camera_power(cam, 0); + + kfree(cam->raw_image); + rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + kfree(cam->cntrlbuf); + + mutex_lock(&cam->cam_lock); + + cam->open_count--; + open_count = cam->open_count; + udev = cam->udev; + + mutex_unlock(&cam->cam_lock); + + if (!open_count && !udev) { + kfree(cam); + } + + return 0; +} + +static void vicam_decode_color(const u8 *data, u8 *rgb) +{ + /* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB + * Copyright (C) 2002 Monroe Williams (monroe@pobox.com) + */ + + int i, prevY, nextY; + + prevY = 512; + nextY = 512; + + data += VICAM_HEADER_SIZE; + + for( i = 0; i < 240; i++, data += 512 ) { + const int y = ( i * 242 ) / 240; + + int j, prevX, nextX; + int Y, Cr, Cb; + + if ( y == 242 - 1 ) { + nextY = -512; + } + + prevX = 1; + nextX = 1; + + for ( j = 0; j < 320; j++, rgb += 3 ) { + const int x = ( j * 512 ) / 320; + const u8 * const src = &data[x]; + + if ( x == 512 - 1 ) { + nextX = -1; + } + + Cr = ( src[prevX] - src[0] ) + + ( src[nextX] - src[0] ); + Cr /= 2; + + Cb = ( src[prevY] - src[prevX + prevY] ) + + ( src[prevY] - src[nextX + prevY] ) + + ( src[nextY] - src[prevX + nextY] ) + + ( src[nextY] - src[nextX + nextY] ); + Cb /= 4; + + Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 ); + + if ( i & 1 ) { + int Ct = Cr; + Cr = Cb; + Cb = Ct; + } + + if ( ( x ^ i ) & 1 ) { + Cr = -Cr; + Cb = -Cb; + } + + rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) + + 500 ) / 900, 0, 255 ); + rgb[1] = clamp( ( ( Y - ( 392 * Cb ) - + ( 813 * Cr ) ) + + 500 ) / 1000, 0, 255 ); + rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) + + 500 ) / 1300, 0, 255 ); + + prevX = -1; + } + + prevY = -512; + } +} + +static void +read_frame(struct vicam_camera *cam, int framenum) +{ + unsigned char *request = cam->cntrlbuf; + int realShutter; + int n; + int actual_length; + + if (cam->needsDummyRead) { + cam->needsDummyRead = 0; + read_frame(cam, framenum); + } + + memset(request, 0, 16); + request[0] = cam->gain; // 0 = 0% gain, FF = 100% gain + + request[1] = 0; // 512x242 capture + + request[2] = 0x90; // the function of these two bytes + request[3] = 0x07; // is not yet understood + + if (cam->shutter_speed > 60) { + // Short exposure + realShutter = + ((-15631900 / cam->shutter_speed) + 260533) / 1000; + request[4] = realShutter & 0xFF; + request[5] = (realShutter >> 8) & 0xFF; + request[6] = 0x03; + request[7] = 0x01; + } else { + // Long exposure + realShutter = 15600 / cam->shutter_speed - 1; + request[4] = 0; + request[5] = 0; + request[6] = realShutter & 0xFF; + request[7] = realShutter >> 8; + } + + // Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0 + request[8] = 0; + // bytes 9-15 do not seem to affect exposure or image quality + + mutex_lock(&cam->cam_lock); + + if (!cam->udev) { + goto done; + } + + n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16); + + if (n < 0) { + printk(KERN_ERR + " Problem sending frame capture control message"); + goto done; + } + + n = usb_bulk_msg(cam->udev, + usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint), + cam->raw_image, + 512 * 242 + 128, &actual_length, 10000); + + if (n < 0) { + printk(KERN_ERR "Problem during bulk read of frame data: %d\n", + n); + } + + done: + mutex_unlock(&cam->cam_lock); +} + +static ssize_t +vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos ) +{ + struct vicam_camera *cam = file->private_data; + + DBG("read %d bytes.\n", (int) count); + + if (*ppos >= VICAM_MAX_FRAME_SIZE) { + *ppos = 0; + return 0; + } + + if (*ppos == 0) { + read_frame(cam, 0); + vicam_decode_color(cam->raw_image, + cam->framebuf + + 0 * VICAM_MAX_FRAME_SIZE); + } + + count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos); + + if (copy_to_user(buf, &cam->framebuf[*ppos], count)) { + count = -EFAULT; + } else { + *ppos += count; + } + + if (count == VICAM_MAX_FRAME_SIZE) { + *ppos = 0; + } + + return count; +} + + +static int +vicam_mmap(struct file *file, struct vm_area_struct *vma) +{ + // TODO: allocate the raw frame buffer if necessary + unsigned long page, pos; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + struct vicam_camera *cam = file->private_data; + + if (!cam) + return -ENODEV; + + DBG("vicam_mmap: %ld\n", size); + + /* We let mmap allocate as much as it wants because Linux was adding 2048 bytes + * to the size the application requested for mmap and it was screwing apps up. + if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE) + return -EINVAL; + */ + + pos = (unsigned long)cam->framebuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + return 0; +} + +#if defined(CONFIG_VIDEO_PROC_FS) + +static struct proc_dir_entry *vicam_proc_root = NULL; + +static int vicam_read_helper(char *page, char **start, off_t off, + int count, int *eof, int value) +{ + char *out = page; + int len; + + out += sprintf(out, "%d",value); + + len = out - page; + len -= off; + if (len < count) { + *eof = 1; + if (len <= 0) + return 0; + } else + len = count; + + *start = page + off; + return len; +} + +static int vicam_read_proc_shutter(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + return vicam_read_helper(page,start,off,count,eof, + ((struct vicam_camera *)data)->shutter_speed); +} + +static int vicam_read_proc_gain(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + return vicam_read_helper(page,start,off,count,eof, + ((struct vicam_camera *)data)->gain); +} + +static int +vicam_write_proc_shutter(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + u16 stmp; + char kbuf[8]; + struct vicam_camera *cam = (struct vicam_camera *) data; + + if (count > 6) + return -EINVAL; + + if (copy_from_user(kbuf, buffer, count)) + return -EFAULT; + + stmp = (u16) simple_strtoul(kbuf, NULL, 10); + if (stmp < 4 || stmp > 32000) + return -EINVAL; + + cam->shutter_speed = stmp; + + return count; +} + +static int +vicam_write_proc_gain(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + u16 gtmp; + char kbuf[8]; + + struct vicam_camera *cam = (struct vicam_camera *) data; + + if (count > 4) + return -EINVAL; + + if (copy_from_user(kbuf, buffer, count)) + return -EFAULT; + + gtmp = (u16) simple_strtoul(kbuf, NULL, 10); + if (gtmp > 255) + return -EINVAL; + cam->gain = gtmp; + + return count; +} + +static void +vicam_create_proc_root(void) +{ + vicam_proc_root = proc_mkdir("video/vicam", NULL); + + if (vicam_proc_root) + vicam_proc_root->owner = THIS_MODULE; + else + printk(KERN_ERR + "could not create /proc entry for vicam!"); +} + +static void +vicam_destroy_proc_root(void) +{ + if (vicam_proc_root) + remove_proc_entry("video/vicam", 0); +} + +static void +vicam_create_proc_entry(struct vicam_camera *cam) +{ + char name[64]; + struct proc_dir_entry *ent; + + DBG(KERN_INFO "vicam: creating proc entry\n"); + + if (!vicam_proc_root || !cam) { + printk(KERN_INFO + "vicam: could not create proc entry, %s pointer is null.\n", + (!cam ? "camera" : "root")); + return; + } + + sprintf(name, "video%d", cam->vdev.minor); + + cam->proc_dir = proc_mkdir(name, vicam_proc_root); + + if ( !cam->proc_dir ) + return; // FIXME: We should probably return an error here + + ent = create_proc_entry("shutter", S_IFREG | S_IRUGO | S_IWUSR, + cam->proc_dir); + if (ent) { + ent->data = cam; + ent->read_proc = vicam_read_proc_shutter; + ent->write_proc = vicam_write_proc_shutter; + ent->size = 64; + } + + ent = create_proc_entry("gain", S_IFREG | S_IRUGO | S_IWUSR, + cam->proc_dir); + if (ent) { + ent->data = cam; + ent->read_proc = vicam_read_proc_gain; + ent->write_proc = vicam_write_proc_gain; + ent->size = 64; + } +} + +static void +vicam_destroy_proc_entry(void *ptr) +{ + struct vicam_camera *cam = (struct vicam_camera *) ptr; + char name[16]; + + if ( !cam->proc_dir ) + return; + + sprintf(name, "video%d", cam->vdev.minor); + remove_proc_entry("shutter", cam->proc_dir); + remove_proc_entry("gain", cam->proc_dir); + remove_proc_entry(name,vicam_proc_root); + cam->proc_dir = NULL; + +} + +#else +static inline void vicam_create_proc_root(void) { } +static inline void vicam_destroy_proc_root(void) { } +static inline void vicam_create_proc_entry(struct vicam_camera *cam) { } +static inline void vicam_destroy_proc_entry(void *ptr) { } +#endif + +static struct file_operations vicam_fops = { + .owner = THIS_MODULE, + .open = vicam_open, + .release = vicam_close, + .read = vicam_read, + .mmap = vicam_mmap, + .ioctl = vicam_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +static struct video_device vicam_template = { + .owner = THIS_MODULE, + .name = "ViCam-based USB Camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_VICAM, + .fops = &vicam_fops, + .minor = -1, +}; + +/* table of devices that work with this driver */ +static struct usb_device_id vicam_table[] = { + {USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, vicam_table); + +static struct usb_driver vicam_driver = { + .name = "vicam", + .probe = vicam_probe, + .disconnect = vicam_disconnect, + .id_table = vicam_table +}; + +/** + * vicam_probe + * @intf: the interface + * @id: the device id + * + * Called by the usb core when a new device is connected that it thinks + * this driver might be interested in. + */ +static int +vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + int bulkEndpoint = 0; + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + struct vicam_camera *cam; + + printk(KERN_INFO "ViCam based webcam connected\n"); + + interface = intf->cur_altsetting; + + DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n", + interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints)); + endpoint = &interface->endpoint[0].desc; + + if ((endpoint->bEndpointAddress & 0x80) && + ((endpoint->bmAttributes & 3) == 0x02)) { + /* we found a bulk in endpoint */ + bulkEndpoint = endpoint->bEndpointAddress; + } else { + printk(KERN_ERR + "No bulk in endpoint was found ?! (this is bad)\n"); + } + + if ((cam = + kmalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) { + printk(KERN_WARNING + "could not allocate kernel memory for vicam_camera struct\n"); + return -ENOMEM; + } + + memset(cam, 0, sizeof (struct vicam_camera)); + + cam->shutter_speed = 15; + + mutex_init(&cam->cam_lock); + + memcpy(&cam->vdev, &vicam_template, + sizeof (vicam_template)); + cam->vdev.priv = cam; // sort of a reverse mapping for those functions that get vdev only + + cam->udev = dev; + cam->bulkEndpoint = bulkEndpoint; + + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) { + kfree(cam); + printk(KERN_WARNING "video_register_device failed\n"); + return -EIO; + } + + vicam_create_proc_entry(cam); + + printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor); + + usb_set_intfdata (intf, cam); + + return 0; +} + +static void +vicam_disconnect(struct usb_interface *intf) +{ + int open_count; + struct vicam_camera *cam = usb_get_intfdata (intf); + usb_set_intfdata (intf, NULL); + + /* we must unregister the device before taking its + * cam_lock. This is because the video open call + * holds the same lock as video unregister. if we + * unregister inside of the cam_lock and open also + * uses the cam_lock, we get deadlock. + */ + + video_unregister_device(&cam->vdev); + + /* stop the camera from being used */ + + mutex_lock(&cam->cam_lock); + + /* mark the camera as gone */ + + cam->udev = NULL; + + vicam_destroy_proc_entry(cam); + + /* the only thing left to do is synchronize with + * our close/release function on who should release + * the camera memory. if there are any users using the + * camera, it's their job. if there are no users, + * it's ours. + */ + + open_count = cam->open_count; + + mutex_unlock(&cam->cam_lock); + + if (!open_count) { + kfree(cam); + } + + printk(KERN_DEBUG "ViCam-based WebCam disconnected\n"); +} + +/* + */ +static int __init +usb_vicam_init(void) +{ + int retval; + DBG(KERN_INFO "ViCam-based WebCam driver startup\n"); + vicam_create_proc_root(); + retval = usb_register(&vicam_driver); + if (retval) + printk(KERN_WARNING "usb_register failed!\n"); + return retval; +} + +static void __exit +usb_vicam_exit(void) +{ + DBG(KERN_INFO + "ViCam-based WebCam driver shutdown\n"); + + usb_deregister(&vicam_driver); + vicam_destroy_proc_root(); +} + +module_init(usb_vicam_init); +module_exit(usb_vicam_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c new file mode 100644 index 00000000000..b57dec3782e --- /dev/null +++ b/drivers/media/video/w9968cf.c @@ -0,0 +1,3691 @@ +/*************************************************************************** + * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. * + * * + * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * - Memory management code from bttv driver by Ralph Metzler, * + * Marcus Metzler and Gerd Knorr. * + * - I2C interface to kernel, high-level image sensor control routines and * + * some symbolic names from OV511 driver by Mark W. McClelland. * + * - Low-level I2C fast write function by Piotr Czerczak. * + * - Low-level I2C read function by Frederic Jouault. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/ioctl.h> +#include <linux/delay.h> +#include <linux/stddef.h> +#include <asm/page.h> +#include <asm/uaccess.h> +#include <linux/page-flags.h> +#include <linux/moduleparam.h> + +#include "w9968cf.h" +#include "w9968cf_decoder.h" + +static struct w9968cf_vpp_t* w9968cf_vpp; +static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait); + +static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */ +static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */ + +static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */ + + +/**************************************************************************** + * Module macros and parameters * + ****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, winbond_id_table); + +MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL); +MODULE_DESCRIPTION(W9968CF_MODULE_NAME); +MODULE_VERSION(W9968CF_MODULE_VERSION); +MODULE_LICENSE(W9968CF_MODULE_LICENSE); +MODULE_SUPPORTED_DEVICE("Video"); + +static int ovmod_load = W9968CF_OVMOD_LOAD; +static unsigned short simcams = W9968CF_SIMCAMS; +static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/ +static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_PACKET_SIZE}; +static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_BUFFERS}; +static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_DOUBLE_BUFFER}; +static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING}; +static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_FILTER_TYPE}; +static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW}; +static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_DECOMPRESSION}; +static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING}; +static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0}; +static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB}; +static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT}; +static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP}; +static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_LIGHTFREQ}; +static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]= + W9968CF_BANDINGFILTER}; +static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV}; +static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT}; +static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR}; +static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME}; +static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_BRIGHTNESS}; +static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE}; +static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR}; +static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_CONTRAST}; +static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_WHITENESS}; +#ifdef W9968CF_DEBUG +static unsigned short debug = W9968CF_DEBUG_LEVEL; +static int specific_debug = W9968CF_SPECIFIC_DEBUG; +#endif + +static unsigned int param_nv[24]; /* number of values per parameter */ + +#ifdef CONFIG_KMOD +module_param(ovmod_load, bool, 0644); +#endif +module_param(simcams, ushort, 0644); +module_param_array(video_nr, short, ¶m_nv[0], 0444); +module_param_array(packet_size, uint, ¶m_nv[1], 0444); +module_param_array(max_buffers, ushort, ¶m_nv[2], 0444); +module_param_array(double_buffer, bool, ¶m_nv[3], 0444); +module_param_array(clamping, bool, ¶m_nv[4], 0444); +module_param_array(filter_type, ushort, ¶m_nv[5], 0444); +module_param_array(largeview, bool, ¶m_nv[6], 0444); +module_param_array(decompression, ushort, ¶m_nv[7], 0444); +module_param_array(upscaling, bool, ¶m_nv[8], 0444); +module_param_array(force_palette, ushort, ¶m_nv[9], 0444); +module_param_array(force_rgb, ushort, ¶m_nv[10], 0444); +module_param_array(autobright, bool, ¶m_nv[11], 0444); +module_param_array(autoexp, bool, ¶m_nv[12], 0444); +module_param_array(lightfreq, ushort, ¶m_nv[13], 0444); +module_param_array(bandingfilter, bool, ¶m_nv[14], 0444); +module_param_array(clockdiv, short, ¶m_nv[15], 0444); +module_param_array(backlight, bool, ¶m_nv[16], 0444); +module_param_array(mirror, bool, ¶m_nv[17], 0444); +module_param_array(monochrome, bool, ¶m_nv[18], 0444); +module_param_array(brightness, uint, ¶m_nv[19], 0444); +module_param_array(hue, uint, ¶m_nv[20], 0444); +module_param_array(colour, uint, ¶m_nv[21], 0444); +module_param_array(contrast, uint, ¶m_nv[22], 0444); +module_param_array(whiteness, uint, ¶m_nv[23], 0444); +#ifdef W9968CF_DEBUG +module_param(debug, ushort, 0644); +module_param(specific_debug, bool, 0644); +#endif + +#ifdef CONFIG_KMOD +MODULE_PARM_DESC(ovmod_load, + "\n<0|1> Automatic 'ovcamchip' module loading." + "\n0 disabled, 1 enabled." + "\nIf enabled,'insmod' searches for the required 'ovcamchip'" + "\nmodule in the system, according to its configuration, and" + "\nattempts to load that module automatically. This action is" + "\nperformed once as soon as the 'w9968cf' module is loaded" + "\ninto memory." + "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"." + "\n"); +#endif +MODULE_PARM_DESC(simcams, + "\n<n> Number of cameras allowed to stream simultaneously." + "\nn may vary from 0 to " + __MODULE_STRING(W9968CF_MAX_DEVICES)"." + "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"." + "\n"); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES) + " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second camera and use auto for the first" + "\none and for every other camera." + "\n"); +MODULE_PARM_DESC(packet_size, + "\n<n[,...]> Specify the maximum data payload" + "\nsize in bytes for alternate settings, for each device." + "\nn is scaled between 63 and 1023 " + "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")." + "\n"); +MODULE_PARM_DESC(max_buffers, + "\n<n[,...]> For advanced users." + "\nSpecify the maximum number of video frame buffers" + "\nto allocate for each device, from 2 to " + __MODULE_STRING(W9968CF_MAX_BUFFERS) + ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")." + "\n"); +MODULE_PARM_DESC(double_buffer, + "\n<0|1[,...]> " + "Hardware double buffering: 0 disabled, 1 enabled." + "\nIt should be enabled if you want smooth video output: if" + "\nyou obtain out of sync. video, disable it, or try to" + "\ndecrease the 'clockdiv' module parameter value." + "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER) + " for every device." + "\n"); +MODULE_PARM_DESC(clamping, + "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled." + "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING) + " for every device." + "\n"); +MODULE_PARM_DESC(filter_type, + "\n<0|1|2[,...]> Video filter type." + "\n0 none, 1 (1-2-1) 3-tap filter, " + "2 (2-3-6-3-2) 5-tap filter." + "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE) + " for every device." + "\nThe filter is used to reduce noise and aliasing artifacts" + "\nproduced by the CCD or CMOS image sensor, and the scaling" + " process." + "\n"); +MODULE_PARM_DESC(largeview, + "\n<0|1[,...]> Large view: 0 disabled, 1 enabled." + "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW) + " for every device." + "\n"); +MODULE_PARM_DESC(upscaling, + "\n<0|1[,...]> Software scaling (for non-compressed video):" + "\n0 disabled, 1 enabled." + "\nDisable it if you have a slow CPU or you don't have" + " enough memory." + "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING) + " for every device." + "\nIf 'w9968cf-vpp' is not present, this parameter is" + " set to 0." + "\n"); +MODULE_PARM_DESC(decompression, + "\n<0|1|2[,...]> Software video decompression:" + "\n- 0 disables decompression (doesn't allow formats needing" + " decompression)" + "\n- 1 forces decompression (allows formats needing" + " decompression only);" + "\n- 2 allows any permitted formats." + "\nFormats supporting compressed video are YUV422P and" + " YUV420P/YUV420 " + "\nin any resolutions where both width and height are " + "a multiple of 16." + "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION) + " for every device." + "\nIf 'w9968cf-vpp' is not present, forcing decompression is " + "\nnot allowed; in this case this parameter is set to 2." + "\n"); +MODULE_PARM_DESC(force_palette, + "\n<0" + "|" __MODULE_STRING(VIDEO_PALETTE_UYVY) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV420) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P) + "|" __MODULE_STRING(VIDEO_PALETTE_YUYV) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV422) + "|" __MODULE_STRING(VIDEO_PALETTE_GREY) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB555) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB565) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB24) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB32) + "[,...]>" + " Force picture palette." + "\nIn order:" + "\n- 0 allows any of the following formats:" + "\n- UYVY 16 bpp - Original video, compression disabled" + "\n- YUV420 12 bpp - Original video, compression enabled" + "\n- YUV422P 16 bpp - Original video, compression enabled" + "\n- YUV420P 12 bpp - Original video, compression enabled" + "\n- YUVY 16 bpp - Software conversion from UYVY" + "\n- YUV422 16 bpp - Software conversion from UYVY" + "\n- GREY 8 bpp - Software conversion from UYVY" + "\n- RGB555 16 bpp - Software conversion from UYVY" + "\n- RGB565 16 bpp - Software conversion from UYVY" + "\n- RGB24 24 bpp - Software conversion from UYVY" + "\n- RGB32 32 bpp - Software conversion from UYVY" + "\nWhen not 0, this parameter will override 'decompression'." + "\nDefault value is 0 for every device." + "\nInitial palette is " + __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"." + "\nIf 'w9968cf-vpp' is not present, this parameter is" + " set to 9 (UYVY)." + "\n"); +MODULE_PARM_DESC(force_rgb, + "\n<0|1[,...]> Read RGB video data instead of BGR:" + "\n 1 = use RGB component ordering." + "\n 0 = use BGR component ordering." + "\nThis parameter has effect when using RGBX palettes only." + "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB) + " for every device." + "\n"); +MODULE_PARM_DESC(autobright, + "\n<0|1[,...]> Image sensor automatically changes brightness:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT) + " for every device." + "\n"); +MODULE_PARM_DESC(autoexp, + "\n<0|1[,...]> Image sensor automatically changes exposure:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP) + " for every device." + "\n"); +MODULE_PARM_DESC(lightfreq, + "\n<50|60[,...]> Light frequency in Hz:" + "\n 50 for European and Asian lighting," + " 60 for American lighting." + "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ) + " for every device." + "\n"); +MODULE_PARM_DESC(bandingfilter, + "\n<0|1[,...]> Banding filter to reduce effects of" + " fluorescent lighting:" + "\n 0 disabled, 1 enabled." + "\nThis filter tries to reduce the pattern of horizontal" + "\nlight/dark bands caused by some (usually fluorescent)" + " lighting." + "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER) + " for every device." + "\n"); +MODULE_PARM_DESC(clockdiv, + "\n<-1|n[,...]> " + "Force pixel clock divisor to a specific value (for experts):" + "\n n may vary from 0 to 127." + "\n -1 for automatic value." + "\nSee also the 'double_buffer' module parameter." + "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV) + " for every device." + "\n"); +MODULE_PARM_DESC(backlight, + "\n<0|1[,...]> Objects are lit from behind:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT) + " for every device." + "\n"); +MODULE_PARM_DESC(mirror, + "\n<0|1[,...]> Reverse image horizontally:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR) + " for every device." + "\n"); +MODULE_PARM_DESC(monochrome, + "\n<0|1[,...]> Use image sensor as monochrome sensor:" + "\n 0 = no, 1 = yes" + "\nNot all the sensors support monochrome color." + "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME) + " for every device." + "\n"); +MODULE_PARM_DESC(brightness, + "\n<n[,...]> Set picture brightness (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS) + " for every device." + "\nThis parameter has no effect if 'autobright' is enabled." + "\n"); +MODULE_PARM_DESC(hue, + "\n<n[,...]> Set picture hue (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_HUE) + " for every device." + "\n"); +MODULE_PARM_DESC(colour, + "\n<n[,...]> Set picture saturation (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR) + " for every device." + "\n"); +MODULE_PARM_DESC(contrast, + "\n<n[,...]> Set picture contrast (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST) + " for every device." + "\n"); +MODULE_PARM_DESC(whiteness, + "\n<n[,...]> Set picture whiteness (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS) + " for every device." + "\n"); +#ifdef W9968CF_DEBUG +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 6:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = configuration or general messages" + "\n4 = warnings" + "\n5 = called functions" + "\n6 = function internals" + "\nLevel 5 and 6 are useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"." + "\n"); +MODULE_PARM_DESC(specific_debug, + "\n<0|1> Enable or disable specific debugging messages:" + "\n0 = print messages concerning every level" + " <= 'debug' level." + "\n1 = print messages concerning the level" + " indicated by 'debug'." + "\nDefault value is " + __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"." + "\n"); +#endif /* W9968CF_DEBUG */ + + + +/**************************************************************************** + * Some prototypes * + ****************************************************************************/ + +/* Video4linux interface */ +static struct file_operations w9968cf_fops; +static int w9968cf_open(struct inode*, struct file*); +static int w9968cf_release(struct inode*, struct file*); +static int w9968cf_mmap(struct file*, struct vm_area_struct*); +static int w9968cf_ioctl(struct inode*, struct file*, unsigned, unsigned long); +static ssize_t w9968cf_read(struct file*, char __user *, size_t, loff_t*); +static int w9968cf_v4l_ioctl(struct inode*, struct file*, unsigned int, + void __user *); + +/* USB-specific */ +static int w9968cf_start_transfer(struct w9968cf_device*); +static int w9968cf_stop_transfer(struct w9968cf_device*); +static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index); +static int w9968cf_read_reg(struct w9968cf_device*, u16 index); +static int w9968cf_write_fsb(struct w9968cf_device*, u16* data); +static int w9968cf_write_sb(struct w9968cf_device*, u16 value); +static int w9968cf_read_sb(struct w9968cf_device*); +static int w9968cf_upload_quantizationtables(struct w9968cf_device*); +static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs); + +/* Low-level I2C (SMBus) I/O */ +static int w9968cf_smbus_start(struct w9968cf_device*); +static int w9968cf_smbus_stop(struct w9968cf_device*); +static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v); +static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v); +static int w9968cf_smbus_write_ack(struct w9968cf_device*); +static int w9968cf_smbus_read_ack(struct w9968cf_device*); +static int w9968cf_smbus_refresh_bus(struct w9968cf_device*); +static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam, + u16 address, u8* value); +static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address, + u8 subaddress, u8* value); +static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*, + u16 address, u8 subaddress); +static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*, + u16 address, u8 subaddress, + u8 value); + +/* I2C interface to kernel */ +static int w9968cf_i2c_init(struct w9968cf_device*); +static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data*); +static u32 w9968cf_i2c_func(struct i2c_adapter*); +static int w9968cf_i2c_attach_inform(struct i2c_client*); +static int w9968cf_i2c_detach_inform(struct i2c_client*); +static int w9968cf_i2c_control(struct i2c_adapter*, unsigned int cmd, + unsigned long arg); + +/* Memory management */ +static void* rvmalloc(unsigned long size); +static void rvfree(void *mem, unsigned long size); +static void w9968cf_deallocate_memory(struct w9968cf_device*); +static int w9968cf_allocate_memory(struct w9968cf_device*); + +/* High-level image sensor control functions */ +static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val); +static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val); +static int w9968cf_sensor_cmd(struct w9968cf_device*, + unsigned int cmd, void *arg); +static int w9968cf_sensor_init(struct w9968cf_device*); +static int w9968cf_sensor_update_settings(struct w9968cf_device*); +static int w9968cf_sensor_get_picture(struct w9968cf_device*); +static int w9968cf_sensor_update_picture(struct w9968cf_device*, + struct video_picture pict); + +/* Other helper functions */ +static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*, + enum w9968cf_model_id, + const unsigned short dev_nr); +static void w9968cf_adjust_configuration(struct w9968cf_device*); +static int w9968cf_turn_on_led(struct w9968cf_device*); +static int w9968cf_init_chip(struct w9968cf_device*); +static inline u16 w9968cf_valid_palette(u16 palette); +static inline u16 w9968cf_valid_depth(u16 palette); +static inline u8 w9968cf_need_decompression(u16 palette); +static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); +static int w9968cf_set_window(struct w9968cf_device*, struct video_window); +static int w9968cf_postprocess_frame(struct w9968cf_device*, + struct w9968cf_frame_t*); +static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h); +static void w9968cf_init_framelist(struct w9968cf_device*); +static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num); +static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**); +static void w9968cf_release_resources(struct w9968cf_device*); + + + +/**************************************************************************** + * Symbolic names * + ****************************************************************************/ + +/* Used to represent a list of values and their respective symbolic names */ +struct w9968cf_symbolic_list { + const int num; + const char *name; +}; + +/*-------------------------------------------------------------------------- + Returns the name of the matching element in the symbolic_list array. The + end of the list must be marked with an element that has a NULL name. + --------------------------------------------------------------------------*/ +static inline const char * +symbolic(struct w9968cf_symbolic_list list[], const int num) +{ + int i; + + for (i = 0; list[i].name != NULL; i++) + if (list[i].num == num) + return (list[i].name); + + return "Unknown"; +} + +static struct w9968cf_symbolic_list camlist[] = { + { W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" }, + { W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" }, + + /* Other cameras (having the same descriptors as Generic W996[87]CF) */ + { W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" }, + { W9986CF_MOD_AAU, "AVerMedia AVerTV USB" }, + { W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" }, + { W9968CF_MOD_LL, "Lebon LDC-035A" }, + { W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" }, + { W9968CF_MOD_OOE, "OmniVision OV8610-EDE" }, + { W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" }, + { W9968CF_MOD_PDPII, "Pretec Digi Pen-II" }, + { W9968CF_MOD_PDP480, "Pretec DigiPen-480" }, + + { -1, NULL } +}; + +static struct w9968cf_symbolic_list senlist[] = { + { CC_OV76BE, "OV76BE" }, + { CC_OV7610, "OV7610" }, + { CC_OV7620, "OV7620" }, + { CC_OV7620AE, "OV7620AE" }, + { CC_OV6620, "OV6620" }, + { CC_OV6630, "OV6630" }, + { CC_OV6630AE, "OV6630AE" }, + { CC_OV6630AF, "OV6630AF" }, + { -1, NULL } +}; + +/* Video4Linux1 palettes */ +static struct w9968cf_symbolic_list v4l1_plist[] = { + { VIDEO_PALETTE_GREY, "GREY" }, + { VIDEO_PALETTE_HI240, "HI240" }, + { VIDEO_PALETTE_RGB565, "RGB565" }, + { VIDEO_PALETTE_RGB24, "RGB24" }, + { VIDEO_PALETTE_RGB32, "RGB32" }, + { VIDEO_PALETTE_RGB555, "RGB555" }, + { VIDEO_PALETTE_YUV422, "YUV422" }, + { VIDEO_PALETTE_YUYV, "YUYV" }, + { VIDEO_PALETTE_UYVY, "UYVY" }, + { VIDEO_PALETTE_YUV420, "YUV420" }, + { VIDEO_PALETTE_YUV411, "YUV411" }, + { VIDEO_PALETTE_RAW, "RAW" }, + { VIDEO_PALETTE_YUV422P, "YUV422P" }, + { VIDEO_PALETTE_YUV411P, "YUV411P" }, + { VIDEO_PALETTE_YUV420P, "YUV420P" }, + { VIDEO_PALETTE_YUV410P, "YUV410P" }, + { -1, NULL } +}; + +/* Decoder error codes: */ +static struct w9968cf_symbolic_list decoder_errlist[] = { + { W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" }, + { W9968CF_DEC_ERR_BUF_OVERFLOW, "Buffer overflow" }, + { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" }, + { W9968CF_DEC_ERR_NO_SOF0, "SOF0 marker not found" }, + { W9968CF_DEC_ERR_NO_SOS, "SOS marker not found" }, + { W9968CF_DEC_ERR_NO_EOI, "EOI marker not found" }, + { -1, NULL } +}; + +/* URB error codes: */ +static struct w9968cf_symbolic_list urb_errlist[] = { + { -ENOMEM, "No memory for allocation of internal structures" }, + { -ENOSPC, "The host controller's bandwidth is already consumed" }, + { -ENOENT, "URB was canceled by unlink_urb" }, + { -EXDEV, "ISO transfer only partially completed" }, + { -EAGAIN, "Too match scheduled for the future" }, + { -ENXIO, "URB already queued" }, + { -EFBIG, "Too much ISO frames requested" }, + { -ENOSR, "Buffer error (overrun)" }, + { -EPIPE, "Specified endpoint is stalled (device not responding)"}, + { -EOVERFLOW, "Babble (bad cable?)" }, + { -EPROTO, "Bit-stuff error (bad cable?)" }, + { -EILSEQ, "CRC/Timeout" }, + { -ETIMEDOUT, "NAK (device does not respond)" }, + { -1, NULL } +}; + + + +/**************************************************************************** + * Memory management functions * + ****************************************************************************/ +static void* rvmalloc(unsigned long size) +{ + void* mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + + +static void rvfree(void* mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + + +/*-------------------------------------------------------------------------- + Deallocate previously allocated memory. + --------------------------------------------------------------------------*/ +static void w9968cf_deallocate_memory(struct w9968cf_device* cam) +{ + u8 i; + + /* Free the isochronous transfer buffers */ + for (i = 0; i < W9968CF_URBS; i++) { + kfree(cam->transfer_buffer[i]); + cam->transfer_buffer[i] = NULL; + } + + /* Free temporary frame buffer */ + if (cam->frame_tmp.buffer) { + rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size); + cam->frame_tmp.buffer = NULL; + } + + /* Free helper buffer */ + if (cam->frame_vpp.buffer) { + rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size); + cam->frame_vpp.buffer = NULL; + } + + /* Free video frame buffers */ + if (cam->frame[0].buffer) { + rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size); + cam->frame[0].buffer = NULL; + } + + cam->nbuffers = 0; + + DBG(5, "Memory successfully deallocated") +} + + +/*-------------------------------------------------------------------------- + Allocate memory buffers for USB transfers and video frames. + This function is called by open() only. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_allocate_memory(struct w9968cf_device* cam) +{ + const u16 p_size = wMaxPacketSize[cam->altsetting-1]; + void* buff = NULL; + unsigned long hw_bufsize, vpp_bufsize; + u8 i, bpp; + + /* NOTE: Deallocation is done elsewhere in case of error */ + + /* Calculate the max amount of raw data per frame from the device */ + hw_bufsize = cam->maxwidth*cam->maxheight*2; + + /* Calculate the max buf. size needed for post-processing routines */ + bpp = (w9968cf_vpp) ? 4 : 2; + if (cam->upscaling) + vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp, + cam->maxwidth*cam->maxheight*bpp); + else + vpp_bufsize = cam->maxwidth*cam->maxheight*bpp; + + /* Allocate memory for the isochronous transfer buffers */ + for (i = 0; i < W9968CF_URBS; i++) { + if (!(cam->transfer_buffer[i] = + kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) { + DBG(1, "Couldn't allocate memory for the isochronous " + "transfer buffers (%u bytes)", + p_size * W9968CF_ISO_PACKETS) + return -ENOMEM; + } + } + + /* Allocate memory for the temporary frame buffer */ + if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) { + DBG(1, "Couldn't allocate memory for the temporary " + "video frame buffer (%lu bytes)", hw_bufsize) + return -ENOMEM; + } + cam->frame_tmp.size = hw_bufsize; + cam->frame_tmp.number = -1; + + /* Allocate memory for the helper buffer */ + if (w9968cf_vpp) { + if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) { + DBG(1, "Couldn't allocate memory for the helper buffer" + " (%lu bytes)", vpp_bufsize) + return -ENOMEM; + } + cam->frame_vpp.size = vpp_bufsize; + } else + cam->frame_vpp.buffer = NULL; + + /* Allocate memory for video frame buffers */ + cam->nbuffers = cam->max_buffers; + while (cam->nbuffers >= 2) { + if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize))) + break; + else + cam->nbuffers--; + } + + if (!buff) { + DBG(1, "Couldn't allocate memory for the video frame buffers") + cam->nbuffers = 0; + return -ENOMEM; + } + + if (cam->nbuffers != cam->max_buffers) + DBG(2, "Couldn't allocate memory for %u video frame buffers. " + "Only memory for %u buffers has been allocated", + cam->max_buffers, cam->nbuffers) + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].buffer = buff + i*vpp_bufsize; + cam->frame[i].size = vpp_bufsize; + cam->frame[i].number = i; + /* Circular list */ + if (i != cam->nbuffers-1) + cam->frame[i].next = &cam->frame[i+1]; + else + cam->frame[i].next = &cam->frame[0]; + cam->frame[i].status = F_UNUSED; + } + + DBG(5, "Memory successfully allocated") + return 0; +} + + + +/**************************************************************************** + * USB-specific functions * + ****************************************************************************/ + +/*-------------------------------------------------------------------------- + This is an handler function which is called after the URBs are completed. + It collects multiple data packets coming from the camera by putting them + into frame buffers: one or more zero data length data packets are used to + mark the end of a video frame; the first non-zero data packet is the start + of the next video frame; if an error is encountered in a packet, the entire + video frame is discarded and grabbed again. + If there are no requested frames in the FIFO list, packets are collected into + a temporary buffer. + --------------------------------------------------------------------------*/ +static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs) +{ + struct w9968cf_device* cam = (struct w9968cf_device*)urb->context; + struct w9968cf_frame_t** f; + unsigned int len, status; + void* pos; + u8 i; + int err = 0; + + if ((!cam->streaming) || cam->disconnected) { + DBG(4, "Got interrupt, but not streaming") + return; + } + + /* "(*f)" will be used instead of "cam->frame_current" */ + f = &cam->frame_current; + + /* If a frame has been requested and we are grabbing into + the temporary frame, we'll switch to that requested frame */ + if ((*f) == &cam->frame_tmp && *cam->requested_frame) { + if (cam->frame_tmp.status == F_GRABBING) { + w9968cf_pop_frame(cam, &cam->frame_current); + (*f)->status = F_GRABBING; + (*f)->length = cam->frame_tmp.length; + memcpy((*f)->buffer, cam->frame_tmp.buffer, + (*f)->length); + DBG(6, "Switched from temp. frame to frame #%d", + (*f)->number) + } + } + + for (i = 0; i < urb->number_of_packets; i++) { + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status && len != 0) { + DBG(4, "URB failed, error in data packet " + "(error #%u, %s)", + status, symbolic(urb_errlist, status)) + (*f)->status = F_ERROR; + continue; + } + + if (len) { /* start of frame */ + + if ((*f)->status == F_UNUSED) { + (*f)->status = F_GRABBING; + (*f)->length = 0; + } + + /* Buffer overflows shouldn't happen, however...*/ + if ((*f)->length + len > (*f)->size) { + DBG(4, "Buffer overflow: bad data packets") + (*f)->status = F_ERROR; + } + + if ((*f)->status == F_GRABBING) { + memcpy((*f)->buffer + (*f)->length, pos, len); + (*f)->length += len; + } + + } else if ((*f)->status == F_GRABBING) { /* end of frame */ + + DBG(6, "Frame #%d successfully grabbed", (*f)->number) + + if (cam->vpp_flag & VPP_DECOMPRESSION) { + err = w9968cf_vpp->check_headers((*f)->buffer, + (*f)->length); + if (err) { + DBG(4, "Skip corrupted frame: %s", + symbolic(decoder_errlist, err)) + (*f)->status = F_UNUSED; + continue; /* grab this frame again */ + } + } + + (*f)->status = F_READY; + (*f)->queued = 0; + + /* Take a pointer to the new frame from the FIFO list. + If the list is empty,we'll use the temporary frame*/ + if (*cam->requested_frame) + w9968cf_pop_frame(cam, &cam->frame_current); + else { + cam->frame_current = &cam->frame_tmp; + (*f)->status = F_UNUSED; + } + + } else if ((*f)->status == F_ERROR) + (*f)->status = F_UNUSED; /* grab it again */ + + PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d", + (unsigned long)(*f)->length, i, len, (*f)->status) + + } /* end for */ + + /* Resubmit this URB */ + urb->dev = cam->usbdev; + urb->status = 0; + spin_lock(&cam->urb_lock); + if (cam->streaming) + if ((err = usb_submit_urb(urb, GFP_ATOMIC))) { + cam->misconfigured = 1; + DBG(1, "Couldn't resubmit the URB: error %d, %s", + err, symbolic(urb_errlist, err)) + } + spin_unlock(&cam->urb_lock); + + /* Wake up the user process */ + wake_up_interruptible(&cam->wait_queue); +} + + +/*--------------------------------------------------------------------------- + Setup the URB structures for the isochronous transfer. + Submit the URBs so that the data transfer begins. + Return 0 on success, a negative number otherwise. + ---------------------------------------------------------------------------*/ +static int w9968cf_start_transfer(struct w9968cf_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const u16 p_size = wMaxPacketSize[cam->altsetting-1]; + u16 w, h, d; + int vidcapt; + u32 t_size; + int err = 0; + s8 i, j; + + for (i = 0; i < W9968CF_URBS; i++) { + urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + for (j = 0; j < i; j++) + usb_free_urb(cam->urb[j]); + DBG(1, "Couldn't allocate the URB structures") + return -ENOMEM; + } + + urb->dev = udev; + urb->context = (void*)cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = W9968CF_ISO_PACKETS; + urb->complete = w9968cf_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < W9968CF_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = p_size*j; + urb->iso_frame_desc[j].length = p_size; + } + } + + /* Transfer size per frame, in WORD ! */ + d = cam->hw_depth; + w = cam->hw_width; + h = cam->hw_height; + + t_size = (w*h*d)/16; + + err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */ + err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */ + + /* Transfer size */ + err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */ + err += w9968cf_write_reg(cam, t_size >> 16, 0x3e); /* high bits */ + + if (cam->vpp_flag & VPP_DECOMPRESSION) + err += w9968cf_upload_quantizationtables(cam); + + vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */ + err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */ + + err += usb_set_interface(udev, 0, cam->altsetting); + err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */ + + if (err || (vidcapt < 0)) { + for (i = 0; i < W9968CF_URBS; i++) + usb_free_urb(cam->urb[i]); + DBG(1, "Couldn't tell the camera to start the data transfer") + return err; + } + + w9968cf_init_framelist(cam); + + /* Begin to grab into the temporary buffer */ + cam->frame_tmp.status = F_UNUSED; + cam->frame_tmp.queued = 0; + cam->frame_current = &cam->frame_tmp; + + if (!(cam->vpp_flag & VPP_DECOMPRESSION)) + DBG(5, "Isochronous transfer size: %lu bytes/frame", + (unsigned long)t_size*2) + + DBG(5, "Starting the isochronous transfer...") + + cam->streaming = 1; + + /* Submit the URBs */ + for (i = 0; i < W9968CF_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + cam->streaming = 0; + for (j = i-1; j >= 0; j--) { + usb_kill_urb(cam->urb[j]); + usb_free_urb(cam->urb[j]); + } + DBG(1, "Couldn't send a transfer request to the " + "USB core (error #%d, %s)", err, + symbolic(urb_errlist, err)) + return err; + } + } + + return 0; +} + + +/*-------------------------------------------------------------------------- + Stop the isochronous transfer and set alternate setting to 0 (0Mb/s). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_stop_transfer(struct w9968cf_device* cam) +{ + struct usb_device *udev = cam->usbdev; + unsigned long lock_flags; + int err = 0; + s8 i; + + if (!cam->streaming) + return 0; + + /* This avoids race conditions with usb_submit_urb() + in the URB completition handler */ + spin_lock_irqsave(&cam->urb_lock, lock_flags); + cam->streaming = 0; + spin_unlock_irqrestore(&cam->urb_lock, lock_flags); + + for (i = W9968CF_URBS-1; i >= 0; i--) + if (cam->urb[i]) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + cam->urb[i] = NULL; + } + + if (cam->disconnected) + goto exit; + + err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */ + err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */ + err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */ + + if (err) { + DBG(2, "Failed to tell the camera to stop the isochronous " + "transfer. However this is not a critical error.") + return -EIO; + } + +exit: + DBG(5, "Isochronous transfer stopped") + return 0; +} + + +/*-------------------------------------------------------------------------- + Write a W9968CF register. + Return 0 on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index) +{ + struct usb_device* udev = cam->usbdev; + int res; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, + value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT); + + if (res < 0) + DBG(4, "Failed to write a register " + "(value 0x%04X, index 0x%02X, error #%d, %s)", + value, index, res, symbolic(urb_errlist, res)) + + return (res >= 0) ? 0 : -1; +} + + +/*-------------------------------------------------------------------------- + Read a W9968CF register. + Return the register value on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u16* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT); + + if (res < 0) + DBG(4, "Failed to read a register " + "(index 0x%02X, error #%d, %s)", + index, res, symbolic(urb_errlist, res)) + + return (res >= 0) ? (int)(*buff) : -1; +} + + +/*-------------------------------------------------------------------------- + Write 64-bit data to the fast serial bus registers. + Return 0 on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data) +{ + struct usb_device* udev = cam->usbdev; + u16 value; + int res; + + value = *data++; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, + value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT); + + if (res < 0) + DBG(4, "Failed to write the FSB registers " + "(error #%d, %s)", res, symbolic(urb_errlist, res)) + + return (res >= 0) ? 0 : -1; +} + + +/*-------------------------------------------------------------------------- + Write data to the serial bus control register. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value) +{ + int err = 0; + + err = w9968cf_write_reg(cam, value, 0x01); + udelay(W9968CF_I2C_BUS_DELAY); + + return err; +} + + +/*-------------------------------------------------------------------------- + Read data from the serial bus control register. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_read_sb(struct w9968cf_device* cam) +{ + int v = 0; + + v = w9968cf_read_reg(cam, 0x01); + udelay(W9968CF_I2C_BUS_DELAY); + + return v; +} + + +/*-------------------------------------------------------------------------- + Upload quantization tables for the JPEG compression. + This function is called by w9968cf_start_transfer(). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam) +{ + u16 a, b; + int err = 0, i, j; + + err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */ + + for (i = 0, j = 0; i < 32; i++, j += 2) { + a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8); + b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8); + err += w9968cf_write_reg(cam, a, 0x40+i); + err += w9968cf_write_reg(cam, b, 0x60+i); + } + err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */ + + return err; +} + + + +/**************************************************************************** + * Low-level I2C I/O functions. * + * The adapter supports the following I2C transfer functions: * + * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only) * + * i2c_adap_read_byte_data() * + * i2c_adap_read_byte() * + ****************************************************************************/ + +static int w9968cf_smbus_start(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ + err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ + + return err; +} + + +static int w9968cf_smbus_stop(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ + err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */ + + return err; +} + + +static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v) +{ + u8 bit; + int err = 0, sda; + + for (bit = 0 ; bit < 8 ; bit++) { + sda = (v & 0x80) ? 2 : 0; + v <<= 1; + /* SDE=1, SDA=sda, SCL=0 */ + err += w9968cf_write_sb(cam, 0x10 | sda); + /* SDE=1, SDA=sda, SCL=1 */ + err += w9968cf_write_sb(cam, 0x11 | sda); + /* SDE=1, SDA=sda, SCL=0 */ + err += w9968cf_write_sb(cam, 0x10 | sda); + } + + return err; +} + + +static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v) +{ + u8 bit; + int err = 0; + + *v = 0; + for (bit = 0 ; bit < 8 ; bit++) { + *v <<= 1; + err += w9968cf_write_sb(cam, 0x0013); + *v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0; + err += w9968cf_write_sb(cam, 0x0012); + } + + return err; +} + + +static int w9968cf_smbus_write_ack(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ + err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ + err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ + + return err; +} + + +static int w9968cf_smbus_read_ack(struct w9968cf_device* cam) +{ + int err = 0, sda; + + err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */ + sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */ + err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */ + if (sda < 0) + err += sda; + if (sda == 1) { + DBG(6, "Couldn't receive the ACK") + err += -1; + } + + return err; +} + + +/* This seems to refresh the communication through the serial bus */ +static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam) +{ + int err = 0, j; + + for (j = 1; j <= 10; j++) { + err = w9968cf_write_reg(cam, 0x0020, 0x01); + err += w9968cf_write_reg(cam, 0x0000, 0x01); + if (err) + break; + } + + return err; +} + + +/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */ +static int +w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam, + u16 address, u8 subaddress,u8 value) +{ + u16* data = cam->data_buffer; + int err = 0; + + err += w9968cf_smbus_refresh_bus(cam); + + /* Enable SBUS outputs */ + err += w9968cf_write_sb(cam, 0x0020); + + data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0); + data[0] |= (address & 0x40) ? 0x4000 : 0x0; + data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0); + data[1] |= (address & 0x20) ? 0x0150 : 0x0; + data[1] |= (address & 0x10) ? 0x5400 : 0x0; + data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0); + data[2] |= (address & 0x04) ? 0x0540 : 0x0; + data[2] |= (address & 0x02) ? 0x5000 : 0x0; + data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0); + data[3] |= (address & 0x01) ? 0x0054 : 0x0; + + err += w9968cf_write_fsb(cam, data); + + data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0); + data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0; + data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0; + data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0); + data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0; + data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0; + data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0; + data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0); + data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0; + data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0; + data[3] = 0x001d; + + err += w9968cf_write_fsb(cam, data); + + data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0); + data[0] |= (value & 0x40) ? 0x0540 : 0x0; + data[0] |= (value & 0x20) ? 0x5000 : 0x0; + data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0); + data[1] |= (value & 0x10) ? 0x0054 : 0x0; + data[1] |= (value & 0x08) ? 0x1500 : 0x0; + data[1] |= (value & 0x04) ? 0x4000 : 0x0; + data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0); + data[2] |= (value & 0x02) ? 0x0150 : 0x0; + data[2] |= (value & 0x01) ? 0x5400 : 0x0; + data[3] = 0xfe1d; + + err += w9968cf_write_fsb(cam, data); + + /* Disable SBUS outputs */ + err += w9968cf_write_sb(cam, 0x0000); + + if (!err) + DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X " + "value 0x%02X", address, subaddress, value) + else + DBG(5, "I2C write byte data failed, addr.0x%04X, " + "subaddr.0x%02X, value 0x%02X", + address, subaddress, value) + + return err; +} + + +/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */ +static int +w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam, + u16 address, u8 subaddress, + u8* value) +{ + int err = 0; + + /* Serial data enable */ + err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */ + + err += w9968cf_smbus_start(cam); + err += w9968cf_smbus_write_byte(cam, address); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_write_byte(cam, subaddress); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_stop(cam); + err += w9968cf_smbus_start(cam); + err += w9968cf_smbus_write_byte(cam, address + 1); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_read_byte(cam, value); + err += w9968cf_smbus_write_ack(cam); + err += w9968cf_smbus_stop(cam); + + /* Serial data disable */ + err += w9968cf_write_sb(cam, 0x0000); + + if (!err) + DBG(5, "I2C read byte data done, addr.0x%04X, " + "subaddr.0x%02X, value 0x%02X", + address, subaddress, *value) + else + DBG(5, "I2C read byte data failed, addr.0x%04X, " + "subaddr.0x%02X, wrong value 0x%02X", + address, subaddress, *value) + + return err; +} + + +/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */ +static int +w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam, + u16 address, u8* value) +{ + int err = 0; + + /* Serial data enable */ + err += w9968cf_write_sb(cam, 0x0013); + + err += w9968cf_smbus_start(cam); + err += w9968cf_smbus_write_byte(cam, address + 1); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_read_byte(cam, value); + err += w9968cf_smbus_write_ack(cam); + err += w9968cf_smbus_stop(cam); + + /* Serial data disable */ + err += w9968cf_write_sb(cam, 0x0000); + + if (!err) + DBG(5, "I2C read byte done, addr.0x%04X, " + "value 0x%02X", address, *value) + else + DBG(5, "I2C read byte failed, addr.0x%04X, " + "wrong value 0x%02X", address, *value) + + return err; +} + + +/* SMBus protocol: S Addr Wr [A] Value [A] P */ +static int +w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam, + u16 address, u8 value) +{ + DBG(4, "i2c_write_byte() is an unsupported transfer mode") + return -EINVAL; +} + + + +/**************************************************************************** + * I2C interface to kernel * + ****************************************************************************/ + +static int +w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + struct w9968cf_device* cam = i2c_get_adapdata(adapter); + u8 i; + int err = 0; + + switch (addr) { + case OV6xx0_SID: + case OV7xx0_SID: + break; + default: + DBG(4, "Rejected slave ID 0x%04X", addr) + return -EINVAL; + } + + if (size == I2C_SMBUS_BYTE) { + /* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */ + addr <<= 1; + + if (read_write == I2C_SMBUS_WRITE) + err = w9968cf_i2c_adap_write_byte(cam, addr, command); + else if (read_write == I2C_SMBUS_READ) + err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte); + + } else if (size == I2C_SMBUS_BYTE_DATA) { + addr <<= 1; + + if (read_write == I2C_SMBUS_WRITE) + err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr, + command, data->byte); + else if (read_write == I2C_SMBUS_READ) { + for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) { + err = w9968cf_i2c_adap_read_byte_data(cam,addr, + command, &data->byte); + if (err) { + if (w9968cf_smbus_refresh_bus(cam)) { + err = -EIO; + break; + } + } else + break; + } + + } else + return -EINVAL; + + } else { + DBG(4, "Unsupported I2C transfer mode (%d)", size) + return -EINVAL; + } + + return err; +} + + +static u32 w9968cf_i2c_func(struct i2c_adapter* adap) +{ + return I2C_FUNC_SMBUS_READ_BYTE | + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + + +static int w9968cf_i2c_attach_inform(struct i2c_client* client) +{ + struct w9968cf_device* cam = i2c_get_adapdata(client->adapter); + int id = client->driver->id, err = 0; + + if (id == I2C_DRIVERID_OVCAMCHIP) { + cam->sensor_client = client; + err = w9968cf_sensor_init(cam); + if (err) { + cam->sensor_client = NULL; + return err; + } + } else { + DBG(4, "Rejected client [%s] with driver [%s]", + client->name, client->driver->driver.name) + return -EINVAL; + } + + DBG(5, "I2C attach client [%s] with driver [%s]", + client->name, client->driver->driver.name) + + return 0; +} + + +static int w9968cf_i2c_detach_inform(struct i2c_client* client) +{ + struct w9968cf_device* cam = i2c_get_adapdata(client->adapter); + + if (cam->sensor_client == client) + cam->sensor_client = NULL; + + DBG(5, "I2C detach client [%s]", client->name) + + return 0; +} + + +static int +w9968cf_i2c_control(struct i2c_adapter* adapter, unsigned int cmd, + unsigned long arg) +{ + return 0; +} + + +static int w9968cf_i2c_init(struct w9968cf_device* cam) +{ + int err = 0; + + static struct i2c_algorithm algo = { + .smbus_xfer = w9968cf_i2c_smbus_xfer, + .algo_control = w9968cf_i2c_control, + .functionality = w9968cf_i2c_func, + }; + + static struct i2c_adapter adap = { + .id = I2C_HW_SMBUS_W9968CF, + .class = I2C_CLASS_CAM_DIGITAL, + .owner = THIS_MODULE, + .client_register = w9968cf_i2c_attach_inform, + .client_unregister = w9968cf_i2c_detach_inform, + .algo = &algo, + }; + + memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter)); + strcpy(cam->i2c_adapter.name, "w9968cf"); + i2c_set_adapdata(&cam->i2c_adapter, cam); + + DBG(6, "Registering I2C adapter with kernel...") + + err = i2c_add_adapter(&cam->i2c_adapter); + if (err) + DBG(1, "Failed to register the I2C adapter") + else + DBG(5, "I2C adapter registered") + + return err; +} + + + +/**************************************************************************** + * Helper functions * + ****************************************************************************/ + +/*-------------------------------------------------------------------------- + Turn on the LED on some webcams. A beep should be heard too. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_turn_on_led(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */ + err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */ + err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */ + err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */ + err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */ + err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */ + + if (err) + DBG(2, "Couldn't turn on the LED") + + DBG(5, "LED turned on") + + return err; +} + + +/*-------------------------------------------------------------------------- + Write some registers for the device initialization. + This function is called once on open(). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_init_chip(struct w9968cf_device* cam) +{ + unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2, + y0 = 0x0000, + u0 = y0 + hw_bufsize/2, + v0 = u0 + hw_bufsize/4, + y1 = v0 + hw_bufsize/4, + u1 = y1 + hw_bufsize/2, + v1 = u1 + hw_bufsize/4; + int err = 0; + + err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */ + err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */ + + err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */ + err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */ + + err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */ + err += w9968cf_write_reg(cam, y0 >> 16, 0x21); /* Y buf.0, high */ + err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */ + err += w9968cf_write_reg(cam, u0 >> 16, 0x25); /* U buf.0, high */ + err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */ + err += w9968cf_write_reg(cam, v0 >> 16, 0x29); /* V buf.0, high */ + + err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */ + err += w9968cf_write_reg(cam, y1 >> 16, 0x23); /* Y buf.1, high */ + err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */ + err += w9968cf_write_reg(cam, u1 >> 16, 0x27); /* U buf.1, high */ + err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */ + err += w9968cf_write_reg(cam, v1 >> 16, 0x2b); /* V buf.1, high */ + + err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */ + err += w9968cf_write_reg(cam, y1 >> 16, 0x33); /* JPEG buf 0 high */ + + err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */ + err += w9968cf_write_reg(cam, y1 >> 16, 0x35); /* JPEG bug 1 high */ + + err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */ + err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/ + err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */ + err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */ + + err += w9968cf_set_picture(cam, cam->picture); /* this before */ + err += w9968cf_set_window(cam, cam->window); + + if (err) + DBG(1, "Chip initialization failed") + else + DBG(5, "Chip successfully initialized") + + return err; +} + + +/*-------------------------------------------------------------------------- + Return non-zero if the palette is supported, 0 otherwise. + --------------------------------------------------------------------------*/ +static inline u16 w9968cf_valid_palette(u16 palette) +{ + u8 i = 0; + while (w9968cf_formatlist[i].palette != 0) { + if (palette == w9968cf_formatlist[i].palette) + return palette; + i++; + } + return 0; +} + + +/*-------------------------------------------------------------------------- + Return the depth corresponding to the given palette. + Palette _must_ be supported ! + --------------------------------------------------------------------------*/ +static inline u16 w9968cf_valid_depth(u16 palette) +{ + u8 i=0; + while (w9968cf_formatlist[i].palette != palette) + i++; + + return w9968cf_formatlist[i].depth; +} + + +/*-------------------------------------------------------------------------- + Return non-zero if the format requires decompression, 0 otherwise. + --------------------------------------------------------------------------*/ +static inline u8 w9968cf_need_decompression(u16 palette) +{ + u8 i = 0; + while (w9968cf_formatlist[i].palette != 0) { + if (palette == w9968cf_formatlist[i].palette) + return w9968cf_formatlist[i].compression; + i++; + } + return 0; +} + + +/*-------------------------------------------------------------------------- + Change the picture settings of the camera. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict) +{ + u16 fmt, hw_depth, hw_palette, reg_v = 0x0000; + int err = 0; + + /* Make sure we are using a valid depth */ + pict.depth = w9968cf_valid_depth(pict.palette); + + fmt = pict.palette; + + hw_depth = pict.depth; /* depth used by the winbond chip */ + hw_palette = pict.palette; /* palette used by the winbond chip */ + + /* VS & HS polarities */ + reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11); + + switch (fmt) + { + case VIDEO_PALETTE_UYVY: + reg_v |= 0x0000; + cam->vpp_flag = VPP_NONE; + break; + case VIDEO_PALETTE_YUV422P: + reg_v |= 0x0002; + cam->vpp_flag = VPP_DECOMPRESSION; + break; + case VIDEO_PALETTE_YUV420: + case VIDEO_PALETTE_YUV420P: + reg_v |= 0x0003; + cam->vpp_flag = VPP_DECOMPRESSION; + break; + case VIDEO_PALETTE_YUYV: + case VIDEO_PALETTE_YUV422: + reg_v |= 0x0000; + cam->vpp_flag = VPP_SWAP_YUV_BYTES; + hw_palette = VIDEO_PALETTE_UYVY; + break; + /* Original video is used instead of RGBX palettes. + Software conversion later. */ + case VIDEO_PALETTE_GREY: + case VIDEO_PALETTE_RGB555: + case VIDEO_PALETTE_RGB565: + case VIDEO_PALETTE_RGB24: + case VIDEO_PALETTE_RGB32: + reg_v |= 0x0000; /* UYVY 16 bit is used */ + hw_depth = 16; + hw_palette = VIDEO_PALETTE_UYVY; + cam->vpp_flag = VPP_UYVY_TO_RGBX; + break; + } + + /* NOTE: due to memory issues, it is better to disable the hardware + double buffering during compression */ + if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION)) + reg_v |= 0x0080; + + if (cam->clamping) + reg_v |= 0x0020; + + if (cam->filter_type == 1) + reg_v |= 0x0008; + else if (cam->filter_type == 2) + reg_v |= 0x000c; + + if ((err = w9968cf_write_reg(cam, reg_v, 0x16))) + goto error; + + if ((err = w9968cf_sensor_update_picture(cam, pict))) + goto error; + + /* If all went well, update the device data structure */ + memcpy(&cam->picture, &pict, sizeof(pict)); + cam->hw_depth = hw_depth; + cam->hw_palette = hw_palette; + + /* Settings changed, so we clear the frame buffers */ + memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size); + + DBG(4, "Palette is %s, depth is %u bpp", + symbolic(v4l1_plist, pict.palette), pict.depth) + + return 0; + +error: + DBG(1, "Failed to change picture settings") + return err; +} + + +/*-------------------------------------------------------------------------- + Change the capture area size of the camera. + This function _must_ be called _after_ w9968cf_set_picture(). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_set_window(struct w9968cf_device* cam, struct video_window win) +{ + u16 x, y, w, h, scx, scy, cw, ch, ax, ay; + unsigned long fw, fh; + struct ovcamchip_window s_win; + int err = 0; + + /* Work around to avoid FP arithmetics */ + #define __SC(x) ((x) << 10) + #define __UNSC(x) ((x) >> 10) + + /* Make sure we are using a supported resolution */ + if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, + (u16*)&win.height))) + goto error; + + /* Scaling factors */ + fw = __SC(win.width) / cam->maxwidth; + fh = __SC(win.height) / cam->maxheight; + + /* Set up the width and height values used by the chip */ + if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) { + cam->vpp_flag |= VPP_UPSCALE; + /* Calculate largest w,h mantaining the same w/h ratio */ + w = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh; + h = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight; + if (w < cam->minwidth) /* just in case */ + w = cam->minwidth; + if (h < cam->minheight) /* just in case */ + h = cam->minheight; + } else { + cam->vpp_flag &= ~VPP_UPSCALE; + w = win.width; + h = win.height; + } + + /* x,y offsets of the cropped area */ + scx = cam->start_cropx; + scy = cam->start_cropy; + + /* Calculate cropped area manteining the right w/h ratio */ + if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) { + cw = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh; + ch = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight; + } else { + cw = w; + ch = h; + } + + /* Setup the window of the sensor */ + s_win.format = VIDEO_PALETTE_UYVY; + s_win.width = cam->maxwidth; + s_win.height = cam->maxheight; + s_win.quarter = 0; /* full progressive video */ + + /* Center it */ + s_win.x = (s_win.width - cw) / 2; + s_win.y = (s_win.height - ch) / 2; + + /* Clock divisor */ + if (cam->clockdiv >= 0) + s_win.clockdiv = cam->clockdiv; /* manual override */ + else + switch (cam->sensor) { + case CC_OV6620: + s_win.clockdiv = 0; + break; + case CC_OV6630: + s_win.clockdiv = 0; + break; + case CC_OV76BE: + case CC_OV7610: + case CC_OV7620: + s_win.clockdiv = 0; + break; + default: + s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR; + } + + /* We have to scale win.x and win.y offsets */ + if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) + || (cam->vpp_flag & VPP_UPSCALE) ) { + ax = __SC(win.x)/fw; + ay = __SC(win.y)/fh; + } else { + ax = win.x; + ay = win.y; + } + + if ((ax + cw) > cam->maxwidth) + ax = cam->maxwidth - cw; + + if ((ay + ch) > cam->maxheight) + ay = cam->maxheight - ch; + + /* Adjust win.x, win.y */ + if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) + || (cam->vpp_flag & VPP_UPSCALE) ) { + win.x = __UNSC(ax*fw); + win.y = __UNSC(ay*fh); + } else { + win.x = ax; + win.y = ay; + } + + /* Offsets used by the chip */ + x = ax + s_win.x; + y = ay + s_win.y; + + /* Go ! */ + if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win))) + goto error; + + err += w9968cf_write_reg(cam, scx + x, 0x10); + err += w9968cf_write_reg(cam, scy + y, 0x11); + err += w9968cf_write_reg(cam, scx + x + cw, 0x12); + err += w9968cf_write_reg(cam, scy + y + ch, 0x13); + err += w9968cf_write_reg(cam, w, 0x14); + err += w9968cf_write_reg(cam, h, 0x15); + + /* JPEG width & height */ + err += w9968cf_write_reg(cam, w, 0x30); + err += w9968cf_write_reg(cam, h, 0x31); + + /* Y & UV frame buffer strides (in WORD) */ + if (cam->vpp_flag & VPP_DECOMPRESSION) { + err += w9968cf_write_reg(cam, w/2, 0x2c); + err += w9968cf_write_reg(cam, w/4, 0x2d); + } else + err += w9968cf_write_reg(cam, w, 0x2c); + + if (err) + goto error; + + /* If all went well, update the device data structure */ + memcpy(&cam->window, &win, sizeof(win)); + cam->hw_width = w; + cam->hw_height = h; + + /* Settings changed, so we clear the frame buffers */ + memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size); + + DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)", + win.width, win.height, win.x, win.y) + + PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, " + "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u", + x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y, + win.width, win.height) + + return 0; + +error: + DBG(1, "Failed to change the capture area size") + return err; +} + + +/*-------------------------------------------------------------------------- + Adjust the asked values for window width and height. + Return 0 on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height) +{ + u16 maxw, maxh; + + if ((*width < cam->minwidth) || (*height < cam->minheight)) + return -ERANGE; + + maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && + w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) + : cam->maxwidth; + maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && + w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) + : cam->maxheight; + + if (*width > maxw) + *width = maxw; + if (*height > maxh) + *height = maxh; + + if (cam->vpp_flag & VPP_DECOMPRESSION) { + *width &= ~15L; /* multiple of 16 */ + *height &= ~15L; + } + + PDBGG("Window size adjusted w=%u, h=%u ", *width, *height) + + return 0; +} + + +/*-------------------------------------------------------------------------- + Initialize the FIFO list of requested frames. + --------------------------------------------------------------------------*/ +static void w9968cf_init_framelist(struct w9968cf_device* cam) +{ + u8 i; + + for (i = 0; i < cam->nbuffers; i++) { + cam->requested_frame[i] = NULL; + cam->frame[i].queued = 0; + cam->frame[i].status = F_UNUSED; + } +} + + +/*-------------------------------------------------------------------------- + Add a frame in the FIFO list of requested frames. + This function is called in process context. + --------------------------------------------------------------------------*/ +static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num) +{ + u8 f; + unsigned long lock_flags; + + spin_lock_irqsave(&cam->flist_lock, lock_flags); + + for (f=0; cam->requested_frame[f] != NULL; f++); + cam->requested_frame[f] = &cam->frame[f_num]; + cam->frame[f_num].queued = 1; + cam->frame[f_num].status = F_UNUSED; /* clear the status */ + + spin_unlock_irqrestore(&cam->flist_lock, lock_flags); + + DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f) +} + + +/*-------------------------------------------------------------------------- + Read, store and remove the first pointer in the FIFO list of requested + frames. This function is called in interrupt context. + --------------------------------------------------------------------------*/ +static void +w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep) +{ + u8 i; + + spin_lock(&cam->flist_lock); + + *framep = cam->requested_frame[0]; + + /* Shift the list of pointers */ + for (i = 0; i < cam->nbuffers-1; i++) + cam->requested_frame[i] = cam->requested_frame[i+1]; + cam->requested_frame[i] = NULL; + + spin_unlock(&cam->flist_lock); + + DBG(6,"Popped frame #%d from the list", (*framep)->number) +} + + +/*-------------------------------------------------------------------------- + High-level video post-processing routine on grabbed frames. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_postprocess_frame(struct w9968cf_device* cam, + struct w9968cf_frame_t* fr) +{ + void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp; + u16 w = cam->window.width, + h = cam->window.height, + d = cam->picture.depth, + fmt = cam->picture.palette, + rgb = cam->force_rgb, + hw_w = cam->hw_width, + hw_h = cam->hw_height, + hw_d = cam->hw_depth; + int err = 0; + + #define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;} + + if (cam->vpp_flag & VPP_DECOMPRESSION) { + memcpy(pOut, pIn, fr->length); + _PSWAP(pIn, pOut) + err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut); + PDBGG("Compressed frame length: %lu",(unsigned long)fr->length) + fr->length = (hw_w*hw_h*hw_d)/8; + _PSWAP(pIn, pOut) + if (err) { + DBG(4, "An error occurred while decoding the frame: " + "%s", symbolic(decoder_errlist, err)) + return err; + } else + DBG(6, "Frame decoded") + } + + if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) { + w9968cf_vpp->swap_yuvbytes(pIn, fr->length); + DBG(6, "Original UYVY component ordering changed") + } + + if (cam->vpp_flag & VPP_UPSCALE) { + w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h); + fr->length = (w*h*hw_d)/8; + _PSWAP(pIn, pOut) + DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u", + hw_w, hw_h, hw_d, w, h) + } + + if (cam->vpp_flag & VPP_UYVY_TO_RGBX) { + w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb); + fr->length = (w*h*d)/8; + _PSWAP(pIn, pOut) + DBG(6, "UYVY-16bit to %s conversion done", + symbolic(v4l1_plist, fmt)) + } + + if (pOut == fr->buffer) + memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length); + + return 0; +} + + + +/**************************************************************************** + * Image sensor control routines * + ****************************************************************************/ + +static int +w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val) +{ + struct ovcamchip_control ctl; + int err; + + ctl.id = cid; + ctl.value = val; + + err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl); + + return err; +} + + +static int +w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val) +{ + struct ovcamchip_control ctl; + int err; + + ctl.id = cid; + + err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl); + if (!err) + *val = ctl.value; + + return err; +} + + +static int +w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg) +{ + struct i2c_client* c = cam->sensor_client; + int rc = 0; + + if (!c || !c->driver || !c->driver->command) + return -EINVAL; + + rc = c->driver->command(c, cmd, arg); + /* The I2C driver returns -EPERM on non-supported controls */ + return (rc < 0 && rc != -EPERM) ? rc : 0; +} + + +/*-------------------------------------------------------------------------- + Update some settings of the image sensor. + Returns: 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_sensor_update_settings(struct w9968cf_device* cam) +{ + int err = 0; + + /* Auto brightness */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT, + cam->auto_brt); + if (err) + return err; + + /* Auto exposure */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP, + cam->auto_exp); + if (err) + return err; + + /* Banding filter */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT, + cam->bandfilt); + if (err) + return err; + + /* Light frequency */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ, + cam->lightfreq); + if (err) + return err; + + /* Back light */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT, + cam->backlight); + if (err) + return err; + + /* Mirror */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR, + cam->mirror); + if (err) + return err; + + return 0; +} + + +/*-------------------------------------------------------------------------- + Get some current picture settings from the image sensor and update the + internal 'picture' structure of the camera. + Returns: 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_sensor_get_picture(struct w9968cf_device* cam) +{ + int err, v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v); + if (err) + return err; + cam->picture.contrast = v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v); + if (err) + return err; + cam->picture.brightness = v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v); + if (err) + return err; + cam->picture.colour = v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v); + if (err) + return err; + cam->picture.hue = v; + + DBG(5, "Got picture settings from the image sensor") + + PDBGG("Brightness, contrast, hue, colour, whiteness are " + "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast, + cam->picture.hue, cam->picture.colour, cam->picture.whiteness) + + return 0; +} + + +/*-------------------------------------------------------------------------- + Update picture settings of the image sensor. + Returns: 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_sensor_update_picture(struct w9968cf_device* cam, + struct video_picture pict) +{ + int err = 0; + + if ((!cam->sensor_initialized) + || pict.contrast != cam->picture.contrast) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT, + pict.contrast); + if (err) + goto fail; + DBG(4, "Contrast changed from %u to %u", + cam->picture.contrast, pict.contrast) + cam->picture.contrast = pict.contrast; + } + + if (((!cam->sensor_initialized) || + pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT, + pict.brightness); + if (err) + goto fail; + DBG(4, "Brightness changed from %u to %u", + cam->picture.brightness, pict.brightness) + cam->picture.brightness = pict.brightness; + } + + if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT, + pict.colour); + if (err) + goto fail; + DBG(4, "Colour changed from %u to %u", + cam->picture.colour, pict.colour) + cam->picture.colour = pict.colour; + } + + if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE, + pict.hue); + if (err) + goto fail; + DBG(4, "Hue changed from %u to %u", + cam->picture.hue, pict.hue) + cam->picture.hue = pict.hue; + } + + return 0; + +fail: + DBG(4, "Failed to change sensor picture setting") + return err; +} + + + +/**************************************************************************** + * Camera configuration * + ****************************************************************************/ + +/*-------------------------------------------------------------------------- + This function is called when a supported image sensor is detected. + Return 0 if the initialization succeeds, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_sensor_init(struct w9968cf_device* cam) +{ + int err = 0; + + if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE, + &cam->monochrome))) + goto error; + + if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE, + &cam->sensor))) + goto error; + + /* NOTE: Make sure width and height are a multiple of 16 */ + switch (cam->sensor_client->addr) { + case OV6xx0_SID: + cam->maxwidth = 352; + cam->maxheight = 288; + cam->minwidth = 64; + cam->minheight = 48; + break; + case OV7xx0_SID: + cam->maxwidth = 640; + cam->maxheight = 480; + cam->minwidth = 64; + cam->minheight = 48; + break; + default: + DBG(1, "Not supported image sensor detected for %s", + symbolic(camlist, cam->id)) + return -EINVAL; + } + + /* These values depend on the ones in the ovxxx0.c sources */ + switch (cam->sensor) { + case CC_OV7620: + cam->start_cropx = 287; + cam->start_cropy = 35; + /* Seems to work around a bug in the image sensor */ + cam->vs_polarity = 1; + cam->hs_polarity = 1; + break; + default: + cam->start_cropx = 320; + cam->start_cropy = 35; + cam->vs_polarity = 1; + cam->hs_polarity = 0; + } + + if ((err = w9968cf_sensor_update_settings(cam))) + goto error; + + if ((err = w9968cf_sensor_update_picture(cam, cam->picture))) + goto error; + + cam->sensor_initialized = 1; + + DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor)) + return 0; + +error: + cam->sensor_initialized = 0; + cam->sensor = CC_UNKNOWN; + DBG(1, "Image sensor initialization failed for %s (/dev/video%d). " + "Try to detach and attach this device again", + symbolic(camlist, cam->id), cam->v4ldev->minor) + return err; +} + + +/*-------------------------------------------------------------------------- + Fill some basic fields in the main device data structure. + This function is called once on w9968cf_usb_probe() for each recognized + camera. + --------------------------------------------------------------------------*/ +static void +w9968cf_configure_camera(struct w9968cf_device* cam, + struct usb_device* udev, + enum w9968cf_model_id mod_id, + const unsigned short dev_nr) +{ + mutex_init(&cam->fileop_mutex); + init_waitqueue_head(&cam->open); + spin_lock_init(&cam->urb_lock); + spin_lock_init(&cam->flist_lock); + + cam->users = 0; + cam->disconnected = 0; + cam->id = mod_id; + cam->sensor = CC_UNKNOWN; + cam->sensor_initialized = 0; + + /* Calculate the alternate setting number (from 1 to 16) + according to the 'packet_size' module parameter */ + if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE) + packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE; + for (cam->altsetting = 1; + packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1]; + cam->altsetting++); + + cam->max_buffers = (max_buffers[dev_nr] < 2 || + max_buffers[dev_nr] > W9968CF_MAX_BUFFERS) + ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr]; + + cam->double_buffer = (double_buffer[dev_nr] == 0 || + double_buffer[dev_nr] == 1) + ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER; + + cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1) + ? (u8)clamping[dev_nr] : W9968CF_CLAMPING; + + cam->filter_type = (filter_type[dev_nr] == 0 || + filter_type[dev_nr] == 1 || + filter_type[dev_nr] == 2) + ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE; + + cam->capture = 1; + + cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1) + ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW; + + cam->decompression = (decompression[dev_nr] == 0 || + decompression[dev_nr] == 1 || + decompression[dev_nr] == 2) + ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION; + + cam->upscaling = (upscaling[dev_nr] == 0 || + upscaling[dev_nr] == 1) + ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING; + + cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1) + ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT; + + cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1) + ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP; + + cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60) + ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ; + + cam->bandfilt = (bandingfilter[dev_nr] == 0 || + bandingfilter[dev_nr] == 1) + ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER; + + cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1) + ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT; + + cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0) + ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV; + + cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1) + ? (u8)mirror[dev_nr] : W9968CF_MIRROR; + + cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1) + ? monochrome[dev_nr] : W9968CF_MONOCHROME; + + cam->picture.brightness = (u16)brightness[dev_nr]; + cam->picture.hue = (u16)hue[dev_nr]; + cam->picture.colour = (u16)colour[dev_nr]; + cam->picture.contrast = (u16)contrast[dev_nr]; + cam->picture.whiteness = (u16)whiteness[dev_nr]; + if (w9968cf_valid_palette((u16)force_palette[dev_nr])) { + cam->picture.palette = (u16)force_palette[dev_nr]; + cam->force_palette = 1; + } else { + cam->force_palette = 0; + if (cam->decompression == 0) + cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF; + else if (cam->decompression == 1) + cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE; + else + cam->picture.palette = W9968CF_PALETTE_DECOMP_ON; + } + cam->picture.depth = w9968cf_valid_depth(cam->picture.palette); + + cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1) + ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB; + + cam->window.x = 0; + cam->window.y = 0; + cam->window.width = W9968CF_WIDTH; + cam->window.height = W9968CF_HEIGHT; + cam->window.chromakey = 0; + cam->window.clipcount = 0; + cam->window.flags = 0; + + DBG(3, "%s configured with settings #%u:", + symbolic(camlist, cam->id), dev_nr) + + DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes", + wMaxPacketSize[cam->altsetting-1]) + + DBG(3, "- Number of requested video frame buffers: %u", + cam->max_buffers) + + if (cam->double_buffer) + DBG(3, "- Hardware double buffering enabled") + else + DBG(3, "- Hardware double buffering disabled") + + if (cam->filter_type == 0) + DBG(3, "- Video filtering disabled") + else if (cam->filter_type == 1) + DBG(3, "- Video filtering enabled: type 1-2-1") + else if (cam->filter_type == 2) + DBG(3, "- Video filtering enabled: type 2-3-6-3-2") + + if (cam->clamping) + DBG(3, "- Video data clamping (CCIR-601 format) enabled") + else + DBG(3, "- Video data clamping (CCIR-601 format) disabled") + + if (cam->largeview) + DBG(3, "- Large view enabled") + else + DBG(3, "- Large view disabled") + + if ((cam->decompression) == 0 && (!cam->force_palette)) + DBG(3, "- Decompression disabled") + else if ((cam->decompression) == 1 && (!cam->force_palette)) + DBG(3, "- Decompression forced") + else if ((cam->decompression) == 2 && (!cam->force_palette)) + DBG(3, "- Decompression allowed") + + if (cam->upscaling) + DBG(3, "- Software image scaling enabled") + else + DBG(3, "- Software image scaling disabled") + + if (cam->force_palette) + DBG(3, "- Image palette forced to %s", + symbolic(v4l1_plist, cam->picture.palette)) + + if (cam->force_rgb) + DBG(3, "- RGB component ordering will be used instead of BGR") + + if (cam->auto_brt) + DBG(3, "- Auto brightness enabled") + else + DBG(3, "- Auto brightness disabled") + + if (cam->auto_exp) + DBG(3, "- Auto exposure enabled") + else + DBG(3, "- Auto exposure disabled") + + if (cam->backlight) + DBG(3, "- Backlight exposure algorithm enabled") + else + DBG(3, "- Backlight exposure algorithm disabled") + + if (cam->mirror) + DBG(3, "- Mirror enabled") + else + DBG(3, "- Mirror disabled") + + if (cam->bandfilt) + DBG(3, "- Banding filter enabled") + else + DBG(3, "- Banding filter disabled") + + DBG(3, "- Power lighting frequency: %u", cam->lightfreq) + + if (cam->clockdiv == -1) + DBG(3, "- Automatic clock divisor enabled") + else + DBG(3, "- Clock divisor: %d", cam->clockdiv) + + if (cam->monochrome) + DBG(3, "- Image sensor used as monochrome") + else + DBG(3, "- Image sensor not used as monochrome") +} + + +/*-------------------------------------------------------------------------- + If the video post-processing module is not loaded, some parameters + must be overridden. + --------------------------------------------------------------------------*/ +static void w9968cf_adjust_configuration(struct w9968cf_device* cam) +{ + if (!w9968cf_vpp) { + if (cam->decompression == 1) { + cam->decompression = 2; + DBG(2, "Video post-processing module not found: " + "'decompression' parameter forced to 2") + } + if (cam->upscaling) { + cam->upscaling = 0; + DBG(2, "Video post-processing module not found: " + "'upscaling' parameter forced to 0") + } + if (cam->picture.palette != VIDEO_PALETTE_UYVY) { + cam->force_palette = 0; + DBG(2, "Video post-processing module not found: " + "'force_palette' parameter forced to 0") + } + cam->picture.palette = VIDEO_PALETTE_UYVY; + cam->picture.depth = w9968cf_valid_depth(cam->picture.palette); + } +} + + +/*-------------------------------------------------------------------------- + Release the resources used by the driver. + This function is called on disconnect + (or on close if deallocation has been deferred) + --------------------------------------------------------------------------*/ +static void w9968cf_release_resources(struct w9968cf_device* cam) +{ + mutex_lock(&w9968cf_devlist_mutex); + + DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor) + + video_unregister_device(cam->v4ldev); + list_del(&cam->v4llist); + i2c_del_adapter(&cam->i2c_adapter); + w9968cf_deallocate_memory(cam); + kfree(cam->control_buffer); + kfree(cam->data_buffer); + + mutex_unlock(&w9968cf_devlist_mutex); +} + + + +/**************************************************************************** + * Video4Linux interface * + ****************************************************************************/ + +static int w9968cf_open(struct inode* inode, struct file* filp) +{ + struct w9968cf_device* cam; + int err; + + /* This the only safe way to prevent race conditions with disconnect */ + if (!down_read_trylock(&w9968cf_disconnect)) + return -ERESTARTSYS; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); + + if (cam->sensor == CC_UNKNOWN) { + DBG(2, "No supported image sensor has been detected by the " + "'ovcamchip' module for the %s (/dev/video%d). Make " + "sure it is loaded *before* (re)connecting the camera.", + symbolic(camlist, cam->id), cam->v4ldev->minor) + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + return -ENODEV; + } + + if (cam->users) { + DBG(2, "%s (/dev/video%d) has been already occupied by '%s'", + symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command) + if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) { + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + return -EWOULDBLOCK; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->disconnected || + !cam->users); + if (err) { + up_read(&w9968cf_disconnect); + return err; + } + if (cam->disconnected) { + up_read(&w9968cf_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + DBG(5, "Opening '%s', /dev/video%d ...", + symbolic(camlist, cam->id), cam->v4ldev->minor) + + cam->streaming = 0; + cam->misconfigured = 0; + + w9968cf_adjust_configuration(cam); + + if ((err = w9968cf_allocate_memory(cam))) + goto deallocate_memory; + + if ((err = w9968cf_init_chip(cam))) + goto deallocate_memory; + + if ((err = w9968cf_start_transfer(cam))) + goto deallocate_memory; + + filp->private_data = cam; + + cam->users++; + strcpy(cam->command, current->comm); + + init_waitqueue_head(&cam->wait_queue); + + DBG(5, "Video device is open") + + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + + return 0; + +deallocate_memory: + w9968cf_deallocate_memory(cam); + DBG(2, "Failed to open the video device") + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + return err; +} + + +static int w9968cf_release(struct inode* inode, struct file* filp) +{ + struct w9968cf_device* cam; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + w9968cf_stop_transfer(cam); + + if (cam->disconnected) { + w9968cf_release_resources(cam); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + w9968cf_deallocate_memory(cam); + wake_up_interruptible_nr(&cam->open, 1); + + DBG(5, "Video device closed") + mutex_unlock(&cam->dev_mutex); + return 0; +} + + +static ssize_t +w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) +{ + struct w9968cf_device* cam; + struct w9968cf_frame_t* fr; + int err = 0; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + if (filp->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->disconnected) { + DBG(2, "Device not present") + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->misconfigured) { + DBG(2, "The camera is misconfigured. Close and open it again.") + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (!cam->frame[0].queued) + w9968cf_push_frame(cam, 0); + + if (!cam->frame[1].queued) + w9968cf_push_frame(cam, 1); + + err = wait_event_interruptible(cam->wait_queue, + cam->frame[0].status == F_READY || + cam->frame[1].status == F_READY || + cam->disconnected); + if (err) { + mutex_unlock(&cam->fileop_mutex); + return err; + } + if (cam->disconnected) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1]; + + if (w9968cf_vpp) + w9968cf_postprocess_frame(cam, fr); + + if (count > fr->length) + count = fr->length; + + if (copy_to_user(buf, fr->buffer, count)) { + fr->status = F_UNUSED; + mutex_unlock(&cam->fileop_mutex); + return -EFAULT; + } + *f_pos += count; + + fr->status = F_UNUSED; + + DBG(5, "%zu bytes read", count) + + mutex_unlock(&cam->fileop_mutex); + return count; +} + + +static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct w9968cf_device* cam = (struct w9968cf_device*) + video_get_drvdata(video_devdata(filp)); + unsigned long vsize = vma->vm_end - vma->vm_start, + psize = cam->nbuffers * cam->frame[0].size, + start = vma->vm_start, + pos = (unsigned long)cam->frame[0].buffer, + page; + + if (cam->disconnected) { + DBG(2, "Device not present") + return -ENODEV; + } + + if (cam->misconfigured) { + DBG(2, "The camera is misconfigured. Close and open it again") + return -EIO; + } + + PDBGG("mmapping %lu bytes...", vsize) + + if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT)) + return -EINVAL; + + while (vsize > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page + vma->vm_pgoff, + PAGE_SIZE, vma->vm_page_prot)) + return -EAGAIN; + start += PAGE_SIZE; + pos += PAGE_SIZE; + vsize -= PAGE_SIZE; + } + + DBG(5, "mmap method successfully called") + return 0; +} + + +static int +w9968cf_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct w9968cf_device* cam; + int err; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->disconnected) { + DBG(2, "Device not present") + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->misconfigured) { + DBG(2, "The camera is misconfigured. Close and open it again.") + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + err = w9968cf_v4l_ioctl(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + return err; +} + + +static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct w9968cf_device* cam; + const char* v4l1_ioctls[] = { + "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER", + "GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF", + "SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO", + "SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE", + "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE", + "GVBIFMT", "SVBIFMT" + }; + + #define V4L1_IOCTL(cmd) \ + ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \ + v4l1_ioctls[_IOC_NR((cmd))] : "?") + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOCGCAP: /* get video capability */ + { + struct video_capability cap = { + .type = VID_TYPE_CAPTURE | VID_TYPE_SCALES, + .channels = 1, + .audios = 0, + .minwidth = cam->minwidth, + .minheight = cam->minheight, + }; + sprintf(cap.name, "W996[87]CF USB Camera #%d", + cam->v4ldev->minor); + cap.maxwidth = (cam->upscaling && w9968cf_vpp) + ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) + : cam->maxwidth; + cap.maxheight = (cam->upscaling && w9968cf_vpp) + ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) + : cam->maxheight; + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + DBG(5, "VIDIOCGCAP successfully called") + return 0; + } + + case VIDIOCGCHAN: /* get video channel informations */ + { + struct video_channel chan; + if (copy_from_user(&chan, arg, sizeof(chan))) + return -EFAULT; + + if (chan.channel != 0) + return -EINVAL; + + strcpy(chan.name, "Camera"); + chan.tuners = 0; + chan.flags = 0; + chan.type = VIDEO_TYPE_CAMERA; + chan.norm = VIDEO_MODE_AUTO; + + if (copy_to_user(arg, &chan, sizeof(chan))) + return -EFAULT; + + DBG(5, "VIDIOCGCHAN successfully called") + return 0; + } + + case VIDIOCSCHAN: /* set active channel */ + { + struct video_channel chan; + + if (copy_from_user(&chan, arg, sizeof(chan))) + return -EFAULT; + + if (chan.channel != 0) + return -EINVAL; + + DBG(5, "VIDIOCSCHAN successfully called") + return 0; + } + + case VIDIOCGPICT: /* get image properties of the picture */ + { + if (w9968cf_sensor_get_picture(cam)) + return -EIO; + + if (copy_to_user(arg, &cam->picture, sizeof(cam->picture))) + return -EFAULT; + + DBG(5, "VIDIOCGPICT successfully called") + return 0; + } + + case VIDIOCSPICT: /* change picture settings */ + { + struct video_picture pict; + int err = 0; + + if (copy_from_user(&pict, arg, sizeof(pict))) + return -EFAULT; + + if ( (cam->force_palette || !w9968cf_vpp) + && pict.palette != cam->picture.palette ) { + DBG(4, "Palette %s rejected: only %s is allowed", + symbolic(v4l1_plist, pict.palette), + symbolic(v4l1_plist, cam->picture.palette)) + return -EINVAL; + } + + if (!w9968cf_valid_palette(pict.palette)) { + DBG(4, "Palette %s not supported. VIDIOCSPICT failed", + symbolic(v4l1_plist, pict.palette)) + return -EINVAL; + } + + if (!cam->force_palette) { + if (cam->decompression == 0) { + if (w9968cf_need_decompression(pict.palette)) { + DBG(4, "Decompression disabled: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, pict.palette)) + return -EINVAL; + } + } else if (cam->decompression == 1) { + if (!w9968cf_need_decompression(pict.palette)) { + DBG(4, "Decompression forced: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, pict.palette)) + return -EINVAL; + } + } + } + + if (pict.depth != w9968cf_valid_depth(pict.palette)) { + DBG(4, "Requested depth %u bpp is not valid for %s " + "palette: ignored and changed to %u bpp", + pict.depth, symbolic(v4l1_plist, pict.palette), + w9968cf_valid_depth(pict.palette)) + pict.depth = w9968cf_valid_depth(pict.palette); + } + + if (pict.palette != cam->picture.palette) { + if(*cam->requested_frame + || cam->frame_current->queued) { + err = wait_event_interruptible + ( cam->wait_queue, + cam->disconnected || + (!*cam->requested_frame && + !cam->frame_current->queued) ); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + if (w9968cf_stop_transfer(cam)) + goto ioctl_fail; + + if (w9968cf_set_picture(cam, pict)) + goto ioctl_fail; + + if (w9968cf_start_transfer(cam)) + goto ioctl_fail; + + } else if (w9968cf_sensor_update_picture(cam, pict)) + return -EIO; + + + DBG(5, "VIDIOCSPICT successfully called") + return 0; + } + + case VIDIOCSWIN: /* set capture area */ + { + struct video_window win; + int err = 0; + + if (copy_from_user(&win, arg, sizeof(win))) + return -EFAULT; + + DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, " + "x=%u, y=%u, %ux%u", win.clipcount, win.flags, + win.x, win.y, win.width, win.height) + + if (win.clipcount != 0 || win.flags != 0) + return -EINVAL; + + if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, + (u16*)&win.height))) { + DBG(4, "Resolution not supported (%ux%u). " + "VIDIOCSWIN failed", win.width, win.height) + return err; + } + + if (win.x != cam->window.x || + win.y != cam->window.y || + win.width != cam->window.width || + win.height != cam->window.height) { + if(*cam->requested_frame + || cam->frame_current->queued) { + err = wait_event_interruptible + ( cam->wait_queue, + cam->disconnected || + (!*cam->requested_frame && + !cam->frame_current->queued) ); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + if (w9968cf_stop_transfer(cam)) + goto ioctl_fail; + + /* This _must_ be called before set_window() */ + if (w9968cf_set_picture(cam, cam->picture)) + goto ioctl_fail; + + if (w9968cf_set_window(cam, win)) + goto ioctl_fail; + + if (w9968cf_start_transfer(cam)) + goto ioctl_fail; + } + + DBG(5, "VIDIOCSWIN successfully called. ") + return 0; + } + + case VIDIOCGWIN: /* get current window properties */ + { + if (copy_to_user(arg,&cam->window,sizeof(struct video_window))) + return -EFAULT; + + DBG(5, "VIDIOCGWIN successfully called") + return 0; + } + + case VIDIOCGMBUF: /* request for memory (mapped) buffer */ + { + struct video_mbuf mbuf; + u8 i; + + mbuf.size = cam->nbuffers * cam->frame[0].size; + mbuf.frames = cam->nbuffers; + for (i = 0; i < cam->nbuffers; i++) + mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer - + (unsigned long)cam->frame[0].buffer; + + if (copy_to_user(arg, &mbuf, sizeof(mbuf))) + return -EFAULT; + + DBG(5, "VIDIOCGMBUF successfully called") + return 0; + } + + case VIDIOCMCAPTURE: /* start the capture to a frame */ + { + struct video_mmap mmap; + struct w9968cf_frame_t* fr; + int err = 0; + + if (copy_from_user(&mmap, arg, sizeof(mmap))) + return -EFAULT; + + DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d", + mmap.frame, symbolic(v4l1_plist, mmap.format), + mmap.width, mmap.height) + + if (mmap.frame >= cam->nbuffers) { + DBG(4, "Invalid frame number (%u). " + "VIDIOCMCAPTURE failed", mmap.frame) + return -EINVAL; + } + + if (mmap.format!=cam->picture.palette && + (cam->force_palette || !w9968cf_vpp)) { + DBG(4, "Palette %s rejected: only %s is allowed", + symbolic(v4l1_plist, mmap.format), + symbolic(v4l1_plist, cam->picture.palette)) + return -EINVAL; + } + + if (!w9968cf_valid_palette(mmap.format)) { + DBG(4, "Palette %s not supported. " + "VIDIOCMCAPTURE failed", + symbolic(v4l1_plist, mmap.format)) + return -EINVAL; + } + + if (!cam->force_palette) { + if (cam->decompression == 0) { + if (w9968cf_need_decompression(mmap.format)) { + DBG(4, "Decompression disabled: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, mmap.format)) + return -EINVAL; + } + } else if (cam->decompression == 1) { + if (!w9968cf_need_decompression(mmap.format)) { + DBG(4, "Decompression forced: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, mmap.format)) + return -EINVAL; + } + } + } + + if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width, + (u16*)&mmap.height))) { + DBG(4, "Resolution not supported (%dx%d). " + "VIDIOCMCAPTURE failed", + mmap.width, mmap.height) + return err; + } + + fr = &cam->frame[mmap.frame]; + + if (mmap.width != cam->window.width || + mmap.height != cam->window.height || + mmap.format != cam->picture.palette) { + + struct video_window win; + struct video_picture pict; + + if(*cam->requested_frame + || cam->frame_current->queued) { + DBG(6, "VIDIOCMCAPTURE. Change settings for " + "frame #%u: %dx%d, format %s. Wait...", + mmap.frame, mmap.width, mmap.height, + symbolic(v4l1_plist, mmap.format)) + err = wait_event_interruptible + ( cam->wait_queue, + cam->disconnected || + (!*cam->requested_frame && + !cam->frame_current->queued) ); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + memcpy(&win, &cam->window, sizeof(win)); + memcpy(&pict, &cam->picture, sizeof(pict)); + win.width = mmap.width; + win.height = mmap.height; + pict.palette = mmap.format; + + if (w9968cf_stop_transfer(cam)) + goto ioctl_fail; + + /* This before set_window */ + if (w9968cf_set_picture(cam, pict)) + goto ioctl_fail; + + if (w9968cf_set_window(cam, win)) + goto ioctl_fail; + + if (w9968cf_start_transfer(cam)) + goto ioctl_fail; + + } else if (fr->queued) { + + DBG(6, "Wait until frame #%u is free", mmap.frame) + + err = wait_event_interruptible(cam->wait_queue, + cam->disconnected || + (!fr->queued)); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + w9968cf_push_frame(cam, mmap.frame); + DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame) + return 0; + } + + case VIDIOCSYNC: /* wait until the capture of a frame is finished */ + { + unsigned int f_num; + struct w9968cf_frame_t* fr; + int err = 0; + + if (copy_from_user(&f_num, arg, sizeof(f_num))) + return -EFAULT; + + if (f_num >= cam->nbuffers) { + DBG(4, "Invalid frame number (%u). " + "VIDIOCMCAPTURE failed", f_num) + return -EINVAL; + } + + DBG(6, "VIDIOCSYNC called for frame #%u", f_num) + + fr = &cam->frame[f_num]; + + switch (fr->status) { + case F_UNUSED: + if (!fr->queued) { + DBG(4, "VIDIOSYNC: Frame #%u not requested!", + f_num) + return -EFAULT; + } + case F_ERROR: + case F_GRABBING: + err = wait_event_interruptible(cam->wait_queue, + (fr->status == F_READY) + || cam->disconnected); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + break; + case F_READY: + break; + } + + if (w9968cf_vpp) + w9968cf_postprocess_frame(cam, fr); + + fr->status = F_UNUSED; + + DBG(5, "VIDIOCSYNC(%u) successfully called", f_num) + return 0; + } + + case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/ + { + struct video_unit unit = { + .video = cam->v4ldev->minor, + .vbi = VIDEO_NO_UNIT, + .radio = VIDEO_NO_UNIT, + .audio = VIDEO_NO_UNIT, + .teletext = VIDEO_NO_UNIT, + }; + + if (copy_to_user(arg, &unit, sizeof(unit))) + return -EFAULT; + + DBG(5, "VIDIOCGUNIT successfully called") + return 0; + } + + case VIDIOCKEY: + return 0; + + case VIDIOCGFBUF: + { + if (clear_user(arg, sizeof(struct video_buffer))) + return -EFAULT; + + DBG(5, "VIDIOCGFBUF successfully called") + return 0; + } + + case VIDIOCGTUNER: + { + struct video_tuner tuner; + if (copy_from_user(&tuner, arg, sizeof(tuner))) + return -EFAULT; + + if (tuner.tuner != 0) + return -EINVAL; + + strcpy(tuner.name, "no_tuner"); + tuner.rangelow = 0; + tuner.rangehigh = 0; + tuner.flags = VIDEO_TUNER_NORM; + tuner.mode = VIDEO_MODE_AUTO; + tuner.signal = 0xffff; + + if (copy_to_user(arg, &tuner, sizeof(tuner))) + return -EFAULT; + + DBG(5, "VIDIOCGTUNER successfully called") + return 0; + } + + case VIDIOCSTUNER: + { + struct video_tuner tuner; + if (copy_from_user(&tuner, arg, sizeof(tuner))) + return -EFAULT; + + if (tuner.tuner != 0) + return -EINVAL; + + if (tuner.mode != VIDEO_MODE_AUTO) + return -EINVAL; + + DBG(5, "VIDIOCSTUNER successfully called") + return 0; + } + + case VIDIOCSFBUF: + case VIDIOCCAPTURE: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + case VIDIOCSPLAYMODE: + case VIDIOCSWRITEMODE: + case VIDIOCGPLAYINFO: + case VIDIOCSMICROCODE: + case VIDIOCGVBIFMT: + case VIDIOCSVBIFMT: + DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s " + "(type 0x%01X, " + "n. 0x%01X, " + "dir. 0x%01X, " + "size 0x%02X)", + V4L1_IOCTL(cmd), + _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd)) + + return -EINVAL; + + default: + DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s " + "type 0x%01X, " + "n. 0x%01X, " + "dir. 0x%01X, " + "size 0x%02X", + V4L1_IOCTL(cmd), + _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd)) + + return -ENOIOCTLCMD; + + } /* end of switch */ + +ioctl_fail: + cam->misconfigured = 1; + DBG(1, "VIDIOC%s failed because of hardware problems. " + "To use the camera, close and open it again.", V4L1_IOCTL(cmd)) + return -EFAULT; +} + + +static struct file_operations w9968cf_fops = { + .owner = THIS_MODULE, + .open = w9968cf_open, + .release = w9968cf_release, + .read = w9968cf_read, + .ioctl = w9968cf_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .mmap = w9968cf_mmap, + .llseek = no_llseek, +}; + + + +/**************************************************************************** + * USB probe and V4L registration, disconnect and id_table[] definition * + ****************************************************************************/ + +static int +w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct w9968cf_device* cam; + int err = 0; + enum w9968cf_model_id mod_id; + struct list_head* ptr; + u8 sc = 0; /* number of simultaneous cameras */ + static unsigned short dev_nr = 0; /* we are handling device number n */ + + if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor && + le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct) + mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */ + else if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[1].idVendor && + le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct) + mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */ + else + return -ENODEV; + + cam = (struct w9968cf_device*) + kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL); + if (!cam) + return -ENOMEM; + + mutex_init(&cam->dev_mutex); + mutex_lock(&cam->dev_mutex); + + cam->usbdev = udev; + /* NOTE: a local copy is used to avoid possible race conditions */ + memcpy(&cam->dev, &udev->dev, sizeof(struct device)); + + DBG(2, "%s detected", symbolic(camlist, mod_id)) + + if (simcams > W9968CF_MAX_DEVICES) + simcams = W9968CF_SIMCAMS; + + /* How many cameras are connected ? */ + mutex_lock(&w9968cf_devlist_mutex); + list_for_each(ptr, &w9968cf_dev_list) + sc++; + mutex_unlock(&w9968cf_devlist_mutex); + + if (sc >= simcams) { + DBG(2, "Device rejected: too many connected cameras " + "(max. %u)", simcams) + err = -EPERM; + goto fail; + } + + + /* Allocate 2 bytes of memory for camera control USB transfers */ + if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) { + DBG(1,"Couldn't allocate memory for camera control transfers") + err = -ENOMEM; + goto fail; + } + + /* Allocate 8 bytes of memory for USB data transfers to the FSB */ + if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) { + DBG(1, "Couldn't allocate memory for data " + "transfers to the FSB") + err = -ENOMEM; + goto fail; + } + + /* Register the V4L device */ + cam->v4ldev = video_device_alloc(); + if (!cam->v4ldev) { + DBG(1, "Could not allocate memory for a V4L structure") + err = -ENOMEM; + goto fail; + } + + strcpy(cam->v4ldev->name, symbolic(camlist, mod_id)); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = VID_HARDWARE_W9968CF; + cam->v4ldev->fops = &w9968cf_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + cam->v4ldev->dev = &cam->dev; + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L device registration failed") + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(2, "Couldn't find a free /dev/videoX node") + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0; + goto fail; + } + + DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor) + + /* Set some basic constants */ + w9968cf_configure_camera(cam, udev, mod_id, dev_nr); + + /* Add a new entry into the list of V4L registered devices */ + mutex_lock(&w9968cf_devlist_mutex); + list_add(&cam->v4llist, &w9968cf_dev_list); + mutex_unlock(&w9968cf_devlist_mutex); + dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0; + + w9968cf_turn_on_led(cam); + + w9968cf_i2c_init(cam); + + usb_set_intfdata(intf, cam); + mutex_unlock(&cam->dev_mutex); + return 0; + +fail: /* Free unused memory */ + kfree(cam->control_buffer); + kfree(cam->data_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return err; +} + + +static void w9968cf_usb_disconnect(struct usb_interface* intf) +{ + struct w9968cf_device* cam = + (struct w9968cf_device*)usb_get_intfdata(intf); + + down_write(&w9968cf_disconnect); + + if (cam) { + /* Prevent concurrent accesses to data */ + mutex_lock(&cam->dev_mutex); + + cam->disconnected = 1; + + DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id)) + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "The device is open (/dev/video%d)! " + "Process name: %s. Deregistration and memory " + "deallocation are deferred on close.", + cam->v4ldev->minor, cam->command) + cam->misconfigured = 1; + w9968cf_stop_transfer(cam); + wake_up_interruptible(&cam->wait_queue); + } else + w9968cf_release_resources(cam); + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + } + + up_write(&w9968cf_disconnect); +} + + +static struct usb_driver w9968cf_usb_driver = { + .name = "w9968cf", + .id_table = winbond_id_table, + .probe = w9968cf_usb_probe, + .disconnect = w9968cf_usb_disconnect, +}; + + + +/**************************************************************************** + * Module init, exit and intermodule communication * + ****************************************************************************/ + +static int __init w9968cf_module_init(void) +{ + int err; + + KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION) + KDBG(3, W9968CF_MODULE_AUTHOR) + + if (ovmod_load) + request_module("ovcamchip"); + + if ((err = usb_register(&w9968cf_usb_driver))) + return err; + + return 0; +} + + +static void __exit w9968cf_module_exit(void) +{ + /* w9968cf_usb_disconnect() will be called */ + usb_deregister(&w9968cf_usb_driver); + + KDBG(2, W9968CF_MODULE_NAME" deregistered") +} + + +module_init(w9968cf_module_init); +module_exit(w9968cf_module_exit); + diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h new file mode 100644 index 00000000000..a87be719a28 --- /dev/null +++ b/drivers/media/video/w9968cf.h @@ -0,0 +1,330 @@ +/*************************************************************************** + * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. * + * * + * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _W9968CF_H_ +#define _W9968CF_H_ + +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/wait.h> +#include <linux/config.h> +#include <linux/param.h> +#include <linux/types.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> + +#include <media/ovcamchip.h> + +#include "w9968cf_vpp.h" + + +/**************************************************************************** + * Default values * + ****************************************************************************/ + +#define W9968CF_OVMOD_LOAD 1 /* automatic 'ovcamchip' module loading */ +#define W9968CF_VPPMOD_LOAD 1 /* automatic 'w9968cf-vpp' module loading */ + +/* Comment/uncomment the following line to enable/disable debugging messages */ +#define W9968CF_DEBUG + +/* These have effect only if W9968CF_DEBUG is defined */ +#define W9968CF_DEBUG_LEVEL 2 /* from 0 to 6. 0 for no debug informations */ +#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */ + +#define W9968CF_MAX_DEVICES 32 +#define W9968CF_SIMCAMS W9968CF_MAX_DEVICES /* simultaneous cameras */ + +#define W9968CF_MAX_BUFFERS 32 +#define W9968CF_BUFFERS 2 /* n. of frame buffers from 2 to MAX_BUFFERS */ + +/* Maximum data payload sizes in bytes for alternate settings */ +static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575, + 511, 447, 383, 319, 255, 191, 127, 63}; +#define W9968CF_PACKET_SIZE 1023 /* according to wMaxPacketSizes[] */ +#define W9968CF_MIN_PACKET_SIZE 63 /* minimum value */ +#define W9968CF_ISO_PACKETS 5 /* n.of packets for isochronous transfers */ +#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */ +#define W9968CF_URBS 2 /* n. of scheduled URBs for ISO transfer */ + +#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */ +#define W9968CF_I2C_RW_RETRIES 15 /* number of max I2C r/w retries */ + +/* Available video formats */ +struct w9968cf_format { + const u16 palette; + const u16 depth; + const u8 compression; +}; + +static const struct w9968cf_format w9968cf_formatlist[] = { + { VIDEO_PALETTE_UYVY, 16, 0 }, /* original video */ + { VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */ + { VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */ + { VIDEO_PALETTE_YUV420, 12, 1 }, /* same as YUV420P */ + { VIDEO_PALETTE_YUYV, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_YUV422, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_GREY, 8, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB555, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB565, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB24, 24, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB32, 32, 0 }, /* software conversion */ + { 0, 0, 0 } /* 0 is a terminating entry */ +}; + +#define W9968CF_DECOMPRESSION 2 /* decomp:0=disable,1=force,2=any formats */ +#define W9968CF_PALETTE_DECOMP_OFF VIDEO_PALETTE_UYVY /* when decomp=0 */ +#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */ +#define W9968CF_PALETTE_DECOMP_ON VIDEO_PALETTE_UYVY /* when decomp=2 */ + +#define W9968CF_FORCE_RGB 0 /* read RGB instead of BGR, yes=1/no=0 */ + +#define W9968CF_MAX_WIDTH 800 /* Has effect if up-scaling is on */ +#define W9968CF_MAX_HEIGHT 600 /* Has effect if up-scaling is on */ +#define W9968CF_WIDTH 320 /* from 128 to 352, multiple of 16 */ +#define W9968CF_HEIGHT 240 /* from 96 to 288, multiple of 16 */ + +#define W9968CF_CLAMPING 0 /* 0 disable, 1 enable video data clamping */ +#define W9968CF_FILTER_TYPE 0 /* 0 disable 1 (1-2-1), 2 (2-3-6-3-2) */ +#define W9968CF_DOUBLE_BUFFER 1 /* 0 disable, 1 enable double buffer */ +#define W9968CF_LARGEVIEW 1 /* 0 disable, 1 enable */ +#define W9968CF_UPSCALING 0 /* 0 disable, 1 enable */ + +#define W9968CF_MONOCHROME 0 /* 0 not monochrome, 1 monochrome sensor */ +#define W9968CF_BRIGHTNESS 31000 /* from 0 to 65535 */ +#define W9968CF_HUE 32768 /* from 0 to 65535 */ +#define W9968CF_COLOUR 32768 /* from 0 to 65535 */ +#define W9968CF_CONTRAST 50000 /* from 0 to 65535 */ +#define W9968CF_WHITENESS 32768 /* from 0 to 65535 */ + +#define W9968CF_AUTOBRIGHT 0 /* 0 disable, 1 enable automatic brightness */ +#define W9968CF_AUTOEXP 1 /* 0 disable, 1 enable automatic exposure */ +#define W9968CF_LIGHTFREQ 50 /* light frequency. 50Hz (Europe) or 60Hz */ +#define W9968CF_BANDINGFILTER 0 /* 0 disable, 1 enable banding filter */ +#define W9968CF_BACKLIGHT 0 /* 0 or 1, 1=object is lit from behind */ +#define W9968CF_MIRROR 0 /* 0 or 1 [don't] reverse image horizontally*/ + +#define W9968CF_CLOCKDIV -1 /* -1 = automatic clock divisor */ +#define W9968CF_DEF_CLOCKDIVISOR 0 /* default sensor clock divisor value */ + + +/**************************************************************************** + * Globals * + ****************************************************************************/ + +#define W9968CF_MODULE_NAME "V4L driver for W996[87]CF JPEG USB " \ + "Dual Mode Camera Chip" +#define W9968CF_MODULE_VERSION "1:1.33-basic" +#define W9968CF_MODULE_AUTHOR "(C) 2002-2004 Luca Risolia" +#define W9968CF_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define W9968CF_MODULE_LICENSE "GPL" + +static const struct usb_device_id winbond_id_table[] = { + { + /* Creative Labs Video Blaster WebCam Go Plus */ + USB_DEVICE(0x041e, 0x4003), + .driver_info = (unsigned long)"w9968cf", + }, + { + /* Generic W996[87]CF JPEG USB Dual Mode Camera */ + USB_DEVICE(0x1046, 0x9967), + .driver_info = (unsigned long)"w9968cf", + }, + { } /* terminating entry */ +}; + +/* W996[87]CF camera models, internal ids: */ +enum w9968cf_model_id { + W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */ + W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/ + W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */ + W9986CF_MOD_AAU = 31, /* AVerMedia AVerTV USB */ + W9968CF_MOD_CLVBWG = 34, /* Creative Labs Video Blaster WebCam Go */ + W9968CF_MOD_LL = 37, /* Lebon LDC-035A */ + W9968CF_MOD_EEEMC = 40, /* Ezonics EZ-802 EZMega Cam */ + W9968CF_MOD_OOE = 42, /* OmniVision OV8610-EDE */ + W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */ + W9968CF_MOD_PDPII = 46, /* Pretec Digi Pen-II */ + W9968CF_MOD_PDP480 = 49, /* Pretec DigiPen-480 */ +}; + +enum w9968cf_frame_status { + F_READY, /* finished grabbing & ready to be read/synced */ + F_GRABBING, /* in the process of being grabbed into */ + F_ERROR, /* something bad happened while processing */ + F_UNUSED /* unused (no VIDIOCMCAPTURE) */ +}; + +struct w9968cf_frame_t { + void* buffer; + unsigned long size; + u32 length; + int number; + enum w9968cf_frame_status status; + struct w9968cf_frame_t* next; + u8 queued; +}; + +enum w9968cf_vpp_flag { + VPP_NONE = 0x00, + VPP_UPSCALE = 0x01, + VPP_SWAP_YUV_BYTES = 0x02, + VPP_DECOMPRESSION = 0x04, + VPP_UYVY_TO_RGBX = 0x08, +}; + +/* Main device driver structure */ +struct w9968cf_device { + struct device dev; /* device structure */ + + enum w9968cf_model_id id; /* private device identifier */ + + struct video_device* v4ldev; /* -> V4L structure */ + struct list_head v4llist; /* entry of the list of V4L cameras */ + + struct usb_device* usbdev; /* -> main USB structure */ + struct urb* urb[W9968CF_URBS]; /* -> USB request block structs */ + void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */ + u16* control_buffer; /* -> buffer for control req.*/ + u16* data_buffer; /* -> data to send to the FSB */ + + struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS]; + struct w9968cf_frame_t frame_tmp; /* temporary frame */ + struct w9968cf_frame_t frame_vpp; /* helper frame.*/ + struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */ + struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS]; + + u8 max_buffers, /* number of requested buffers */ + force_palette, /* yes=1/no=0 */ + force_rgb, /* read RGB instead of BGR, yes=1, no=0 */ + double_buffer, /* hardware double buffering yes=1/no=0 */ + clamping, /* video data clamping yes=1/no=0 */ + filter_type, /* 0=disabled, 1=3 tap, 2=5 tap filter */ + capture, /* 0=disabled, 1=enabled */ + largeview, /* 0=disabled, 1=enabled */ + decompression, /* 0=disabled, 1=forced, 2=allowed */ + upscaling; /* software image scaling, 0=enabled, 1=disabled */ + + struct video_picture picture; /* current picture settings */ + struct video_window window; /* current window settings */ + + u16 hw_depth, /* depth (used by the chip) */ + hw_palette, /* palette (used by the chip) */ + hw_width, /* width (used by the chip) */ + hw_height, /* height (used by the chip) */ + hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */ + vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */ + start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/ + start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/ + + enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */ + + u8 nbuffers, /* number of allocated frame buffers */ + altsetting, /* camera alternate setting */ + disconnected, /* flag: yes=1, no=0 */ + misconfigured, /* flag: yes=1, no=0 */ + users, /* flag: number of users holding the device */ + streaming; /* flag: yes=1, no=0 */ + + u8 sensor_initialized; /* flag: yes=1, no=0 */ + + /* Determined by the image sensor type: */ + int sensor, /* type of image sensor chip (CC_*) */ + monochrome; /* image sensor is (probably) monochrome */ + u16 maxwidth, /* maximum width supported by the image sensor */ + maxheight, /* maximum height supported by the image sensor */ + minwidth, /* minimum width supported by the image sensor */ + minheight; /* minimum height supported by the image sensor */ + u8 auto_brt, /* auto brightness enabled flag */ + auto_exp, /* auto exposure enabled flag */ + backlight, /* backlight exposure algorithm flag */ + mirror, /* image is reversed horizontally */ + lightfreq, /* power (lighting) frequency */ + bandfilt; /* banding filter enabled flag */ + s8 clockdiv; /* clock divisor */ + + /* I2C interface to kernel */ + struct i2c_adapter i2c_adapter; + struct i2c_client* sensor_client; + + /* Locks */ + struct mutex dev_mutex, /* for probe, disconnect,open and close */ + fileop_mutex; /* for read and ioctl */ + spinlock_t urb_lock, /* for submit_urb() and unlink_urb() */ + flist_lock; /* for requested frame list accesses */ + wait_queue_head_t open, wait_queue; + + char command[16]; /* name of the program holding the device */ +}; + + +/**************************************************************************** + * Macros for debugging * + ****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef W9968CF_DEBUG +/* For device specific debugging messages */ +# define DBG(level, fmt, args...) \ +{ \ + if ( ((specific_debug) && (debug == (level))) || \ + ((!specific_debug) && (debug >= (level))) ) { \ + if ((level) == 1) \ + dev_err(&cam->dev, fmt "\n", ## args); \ + else if ((level) == 2 || (level) == 3) \ + dev_info(&cam->dev, fmt "\n", ## args); \ + else if ((level) == 4) \ + dev_warn(&cam->dev, fmt "\n", ## args); \ + else if ((level) >= 5) \ + dev_info(&cam->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} +/* For generic kernel (not device specific) messages */ +# define KDBG(level, fmt, args...) \ +{ \ + if ( ((specific_debug) && (debug == (level))) || \ + ((!specific_debug) && (debug >= (level))) ) { \ + if ((level) >= 1 && (level) <= 4) \ + pr_info("w9968cf: " fmt "\n", ## args); \ + else if ((level) >= 5) \ + pr_debug("w9968cf: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} +#else + /* Not debugging: nothing */ +# define DBG(level, fmt, args...) do {;} while(0); +# define KDBG(level, fmt, args...) do {;} while(0); +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args); + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */ + +#endif /* _W9968CF_H_ */ diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h new file mode 100644 index 00000000000..31faccbe8f0 --- /dev/null +++ b/drivers/media/video/w9968cf_decoder.h @@ -0,0 +1,86 @@ +/*************************************************************************** + * Video decoder for the W996[87]CF driver for Linux. * + * * + * Copyright (C) 2003 2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _W9968CF_DECODER_H_ +#define _W9968CF_DECODER_H_ + +/* Comment/uncomment this for high/low quality of compressed video */ +#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO + +#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO +static const unsigned char Y_QUANTABLE[64] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 +}; + +static const unsigned char UV_QUANTABLE[64] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 +}; +#else +static const unsigned char Y_QUANTABLE[64] = { + 8, 5, 5, 8, 12, 20, 25, 30, + 6, 6, 7, 9, 13, 29, 30, 27, + 7, 6, 8, 12, 20, 28, 34, 28, + 7, 8, 11, 14, 25, 43, 40, 31, + 9, 11, 18, 28, 34, 54, 51, 38, + 12, 17, 27, 32, 40, 52, 56, 46, + 24, 32, 39, 43, 51, 60, 60, 50, + 36, 46, 47, 49, 56, 50, 51, 49 +}; + +static const unsigned char UV_QUANTABLE[64] = { + 8, 9, 12, 23, 49, 49, 49, 49, + 9, 10, 13, 33, 49, 49, 49, 49, + 12, 13, 28, 49, 49, 49, 49, 49, + 23, 33, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49 +}; +#endif + +#define W9968CF_DEC_ERR_CORRUPTED_DATA -1 +#define W9968CF_DEC_ERR_BUF_OVERFLOW -2 +#define W9968CF_DEC_ERR_NO_SOI -3 +#define W9968CF_DEC_ERR_NO_SOF0 -4 +#define W9968CF_DEC_ERR_NO_SOS -5 +#define W9968CF_DEC_ERR_NO_EOI -6 + +extern void w9968cf_init_decoder(void); +extern int w9968cf_check_headers(const unsigned char* Pin, + const unsigned long BUF_SIZE); +extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE, + const unsigned W, const unsigned H, char* Pout); + +#endif /* _W9968CF_DECODER_H_ */ diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h new file mode 100644 index 00000000000..f3b91b78267 --- /dev/null +++ b/drivers/media/video/w9968cf_vpp.h @@ -0,0 +1,40 @@ +/*************************************************************************** + * Interface for video post-processing functions for the W996[87]CF driver * + * for Linux. * + * * + * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _W9968CF_VPP_H_ +#define _W9968CF_VPP_H_ + +#include <linux/module.h> +#include <asm/types.h> + +struct w9968cf_vpp_t { + struct module* owner; + int (*check_headers)(const unsigned char*, const unsigned long); + int (*decode)(const char*, const unsigned long, const unsigned, + const unsigned, char*); + void (*swap_yuvbytes)(void*, unsigned long); + void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8); + void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16); + + u8 busy; /* read-only flag: module is/is not in use */ +}; + +#endif /* _W9968CF_VPP_H_ */ diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile new file mode 100644 index 00000000000..d749199d8f0 --- /dev/null +++ b/drivers/media/video/zc0301/Makefile @@ -0,0 +1,3 @@ +zc0301-objs := zc0301_core.o zc0301_pas202bcb.o + +obj-$(CONFIG_USB_ZC0301) += zc0301.o diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h new file mode 100644 index 00000000000..8e0655140e6 --- /dev/null +++ b/drivers/media/video/zc0301/zc0301.h @@ -0,0 +1,192 @@ +/*************************************************************************** + * V4L2 driver for ZC0301 Image Processor and Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ZC0301_H_ +#define _ZC0301_H_ + +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <linux/param.h> +#include <linux/mutex.h> +#include <linux/rwsem.h> +#include <linux/stddef.h> +#include <linux/string.h> + +#include "zc0301_sensor.h" + +/*****************************************************************************/ + +#define ZC0301_DEBUG +#define ZC0301_DEBUG_LEVEL 2 +#define ZC0301_MAX_DEVICES 64 +#define ZC0301_FORCE_MUNMAP 0 +#define ZC0301_MAX_FRAMES 32 +#define ZC0301_COMPRESSION_QUALITY 0 +#define ZC0301_URBS 2 +#define ZC0301_ISO_PACKETS 7 +#define ZC0301_ALTERNATE_SETTING 7 +#define ZC0301_URB_TIMEOUT msecs_to_jiffies(2 * ZC0301_ISO_PACKETS) +#define ZC0301_CTRL_TIMEOUT 100 +#define ZC0301_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +ZC0301_ID_TABLE +ZC0301_SENSOR_TABLE + +enum zc0301_frame_state { + F_UNUSED, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +struct zc0301_frame_t { + void* bufmem; + struct v4l2_buffer buf; + enum zc0301_frame_state state; + struct list_head frame; + unsigned long vma_use_count; +}; + +enum zc0301_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +enum zc0301_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum zc0301_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +struct zc0301_module_param { + u8 force_munmap; + u16 frame_timeout; +}; + +static DECLARE_RWSEM(zc0301_disconnect); + +struct zc0301_device { + struct video_device* v4ldev; + + struct zc0301_sensor sensor; + + struct usb_device* usbdev; + struct urb* urb[ZC0301_URBS]; + void* transfer_buffer[ZC0301_URBS]; + u8* control_buffer; + + struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES]; + struct list_head inqueue, outqueue; + u32 frame_count, nbuffers, nreadbuffers; + + enum zc0301_io_method io; + enum zc0301_stream_state stream; + + struct v4l2_jpegcompression compression; + + struct zc0301_module_param module_param; + + enum zc0301_dev_state state; + u8 users; + + struct mutex dev_mutex, fileop_mutex; + spinlock_t queue_lock; + wait_queue_head_t open, wait_frame, wait_stream; +}; + +/*****************************************************************************/ + +struct zc0301_device* +zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id) +{ + return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL; +} + +void +zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor) +{ + memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor)); +} + +/*****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef ZC0301_DEBUG +# define DBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1) \ + dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) == 2) \ + dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) >= 3) \ + dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} while (0) +# define KDBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1 || (level) == 2) \ + pr_info("zc0301: " fmt "\n", ## args); \ + else if ((level) == 3) \ + pr_debug("zc0301: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} while (0) +# define V4LDBG(level, name, cmd) \ +do { \ + if (debug >= (level)) \ + v4l_print_ioctl(name, cmd); \ +} while (0) +#else +# define DBG(level, fmt, args...) do {;} while(0) +# define KDBG(level, fmt, args...) do {;} while(0) +# define V4LDBG(level, name, cmd) do {;} while(0) +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args) + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ + +#endif /* _ZC0301_H_ */ diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c new file mode 100644 index 00000000000..4036c6268bf --- /dev/null +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -0,0 +1,2055 @@ +/*************************************************************************** + * Video4Linux2 driver for ZC0301 Image Processor and Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * Informations about the chip internals needed to enable the I2C protocol * + * have been taken from the documentation of the ZC030x Video4Linux1 * + * driver written by Andrew Birkett <andy@nobugs.org> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/byteorder/generic.h> +#include <asm/page.h> +#include <asm/uaccess.h> + +#include "zc0301.h" + +/*****************************************************************************/ + +#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301 " \ + "Image Processor and Control Chip" +#define ZC0301_MODULE_AUTHOR "(C) 2006 Luca Risolia" +#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define ZC0301_MODULE_LICENSE "GPL" +#define ZC0301_MODULE_VERSION "1:1.03" +#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 3) + +/*****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, zc0301_id_table); + +MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL); +MODULE_DESCRIPTION(ZC0301_MODULE_NAME); +MODULE_VERSION(ZC0301_MODULE_VERSION); +MODULE_LICENSE(ZC0301_MODULE_LICENSE); + +static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1}; +module_param_array(video_nr, short, NULL, 0444); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L2 minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to " + __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second registered camera and use auto for the first" + "\none and for every other camera." + "\n"); + +static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] = + ZC0301_FORCE_MUNMAP}; +module_param_array(force_munmap, bool, NULL, 0444); +MODULE_PARM_DESC(force_munmap, + "\n<0|1[,...]> Force the application to unmap previously" + "\nmapped buffer memory before calling any VIDIOC_S_CROP or" + "\nVIDIOC_S_FMT ioctl's. Not all the applications support" + "\nthis feature. This parameter is specific for each" + "\ndetected camera." + "\n 0 = do not force memory unmapping" + "\n 1 = force memory unmapping (save memory)" + "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"." + "\n"); + +static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] = + ZC0301_FRAME_TIMEOUT}; +module_param_array(frame_timeout, uint, NULL, 0644); +MODULE_PARM_DESC(frame_timeout, + "\n<n[,...]> Timeout for a video frame in seconds." + "\nThis parameter is specific for each detected camera." + "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"." + "\n"); + +#ifdef ZC0301_DEBUG +static unsigned short debug = ZC0301_DEBUG_LEVEL; +module_param(debug, ushort, 0644); +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 3:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = more verbose messages" + "\nLevel 3 is useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"." + "\n"); +#endif + +/*****************************************************************************/ + +static u32 +zc0301_request_buffers(struct zc0301_device* cam, u32 count, + enum zc0301_io_method io) +{ + struct v4l2_pix_format* p = &(cam->sensor.pix_format); + struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); + const size_t imagesize = cam->module_param.force_munmap || + io == IO_READ ? + (p->width * p->height * p->priv) / 8 : + (r->width * r->height * p->priv) / 8; + void* buff = NULL; + u32 i; + + if (count > ZC0301_MAX_FRAMES) + count = ZC0301_MAX_FRAMES; + + cam->nbuffers = count; + while (cam->nbuffers > 0) { + if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize)))) + break; + cam->nbuffers--; + } + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.index = i; + cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.length = imagesize; + cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->frame[i].buf.sequence = 0; + cam->frame[i].buf.field = V4L2_FIELD_NONE; + cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; + cam->frame[i].buf.flags = 0; + } + + return cam->nbuffers; +} + + +static void zc0301_release_buffers(struct zc0301_device* cam) +{ + if (cam->nbuffers) { + vfree(cam->frame[0].bufmem); + cam->nbuffers = 0; + } + cam->frame_current = NULL; +} + + +static void zc0301_empty_framequeues(struct zc0301_device* cam) +{ + u32 i; + + INIT_LIST_HEAD(&cam->inqueue); + INIT_LIST_HEAD(&cam->outqueue); + + for (i = 0; i < ZC0301_MAX_FRAMES; i++) { + cam->frame[i].state = F_UNUSED; + cam->frame[i].buf.bytesused = 0; + } +} + + +static void zc0301_requeue_outqueue(struct zc0301_device* cam) +{ + struct zc0301_frame_t *i; + + list_for_each_entry(i, &cam->outqueue, frame) { + i->state = F_QUEUED; + list_add(&i->frame, &cam->inqueue); + } + + INIT_LIST_HEAD(&cam->outqueue); +} + + +static void zc0301_queue_unusedframes(struct zc0301_device* cam) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].state == F_UNUSED) { + cam->frame[i].state = F_QUEUED; + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[i].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + } +} + +/*****************************************************************************/ + +int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value) +{ + struct usb_device* udev = cam->usbdev; + int res; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40, + value, index, NULL, 0, ZC0301_CTRL_TIMEOUT); + if (res < 0) { + DBG(3, "Failed to write a register (index 0x%04X, " + "value 0x%02X, error %d)",index, value, res); + return -1; + } + + return 0; +} + + +int zc0301_read_reg(struct zc0301_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0, + 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT); + if (res < 0) + DBG(3, "Failed to read a register (index 0x%04X, error %d)", + index, res); + + PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff)); + + return (res >= 0) ? (int)(*buff) : -1; +} + + +int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length) +{ + int err = 0, res, r0, r1; + + err += zc0301_write_reg(cam, 0x0092, address); + err += zc0301_write_reg(cam, 0x0090, 0x02); + + msleep(1); + + res = zc0301_read_reg(cam, 0x0091); + if (res < 0) + err += res; + r0 = zc0301_read_reg(cam, 0x0095); + if (r0 < 0) + err += r0; + r1 = zc0301_read_reg(cam, 0x0096); + if (r1 < 0) + err += r1; + + res = (length <= 1) ? r0 : r0 | (r1 << 8); + + if (err) + DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X", + address, res); + + + PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res); + + return err ? -1 : res; +} + + +int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value) +{ + int err = 0, res; + + err += zc0301_write_reg(cam, 0x0092, address); + err += zc0301_write_reg(cam, 0x0093, value & 0xff); + err += zc0301_write_reg(cam, 0x0094, value >> 8); + err += zc0301_write_reg(cam, 0x0090, 0x01); + + msleep(1); + + res = zc0301_read_reg(cam, 0x0091); + if (res < 0) + err += res; + + if (err) + DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X", + address, value); + + PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value); + + return err ? -1 : 0; +} + +/*****************************************************************************/ + +static void zc0301_urb_complete(struct urb *urb, struct pt_regs* regs) +{ + struct zc0301_device* cam = urb->context; + struct zc0301_frame_t** f; + size_t imagesize; + u8 i; + int err = 0; + + if (urb->status == -ENOENT) + return; + + f = &cam->frame_current; + + if (cam->stream == STREAM_INTERRUPT) { + cam->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + DBG(3, "Stream interrupted"); + wake_up(&cam->wait_stream); + } + + if (cam->state & DEV_DISCONNECTED) + return; + + if (cam->state & DEV_MISCONFIGURED) { + wake_up_interruptible(&cam->wait_frame); + return; + } + + if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) + goto resubmit_urb; + + if (!(*f)) + (*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t, + frame); + + imagesize = (cam->sensor.pix_format.width * + cam->sensor.pix_format.height * + cam->sensor.pix_format.priv) / 8; + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int len, status; + void *pos; + u16* soi; + u8 sof; + + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status) { + DBG(3, "Error in isochronous frame"); + (*f)->state = F_ERROR; + continue; + } + + sof = (*(soi = pos) == 0xd8ff); + + PDBGG("Isochrnous frame: length %u, #%u i,", len, i); + + if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) +start_of_frame: + if (sof) { + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + do_gettimeofday(&(*f)->buf.timestamp); + DBG(3, "SOF detected: new video frame"); + } + + if ((*f)->state == F_GRABBING) { + if (sof && (*f)->buf.bytesused) + goto end_of_frame; + + if ((*f)->buf.bytesused + len > imagesize) { + DBG(3, "Video frame size exceeded"); + (*f)->state = F_ERROR; + continue; + } + + memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len); + (*f)->buf.bytesused += len; + + if ((*f)->buf.bytesused == imagesize) { + u32 b; +end_of_frame: + b = (*f)->buf.bytesused; + (*f)->state = F_DONE; + (*f)->buf.sequence= ++cam->frame_count; + spin_lock(&cam->queue_lock); + list_move_tail(&(*f)->frame, &cam->outqueue); + if (!list_empty(&cam->inqueue)) + (*f) = list_entry(cam->inqueue.next, + struct zc0301_frame_t, + frame); + else + (*f) = NULL; + spin_unlock(&cam->queue_lock); + DBG(3, "Video frame captured: : %lu bytes", + (unsigned long)(b)); + + if (!(*f)) + goto resubmit_urb; + + if (sof) + goto start_of_frame; + } + } + } + +resubmit_urb: + urb->dev = cam->usbdev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0 && err != -EPERM) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "usb_submit_urb() failed"); + } + + wake_up_interruptible(&cam->wait_frame); +} + + +static int zc0301_start_transfer(struct zc0301_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const unsigned int wMaxPacketSize[] = {0, 128, 192, 256, 384, + 512, 768, 1023}; + const unsigned int psz = wMaxPacketSize[ZC0301_ALTERNATE_SETTING]; + s8 i, j; + int err = 0; + + for (i = 0; i < ZC0301_URBS; i++) { + cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz, + GFP_KERNEL); + if (!cam->transfer_buffer[i]) { + err = -ENOMEM; + DBG(1, "Not enough memory"); + goto free_buffers; + } + } + + for (i = 0; i < ZC0301_URBS; i++) { + urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + err = -ENOMEM; + DBG(1, "usb_alloc_urb() failed"); + goto free_urbs; + } + urb->dev = udev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = ZC0301_ISO_PACKETS; + urb->complete = zc0301_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < ZC0301_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = psz * j; + urb->iso_frame_desc[j].length = psz; + } + } + + err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING); + if (err) { + DBG(1, "usb_set_interface() failed"); + goto free_urbs; + } + + cam->frame_current = NULL; + + for (i = 0; i < ZC0301_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + for (j = i-1; j >= 0; j--) + usb_kill_urb(cam->urb[j]); + DBG(1, "usb_submit_urb() failed, error %d", err); + goto free_urbs; + } + } + + return 0; + +free_urbs: + for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++) + usb_free_urb(cam->urb[i]); + +free_buffers: + for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++) + kfree(cam->transfer_buffer[i]); + + return err; +} + + +static int zc0301_stop_transfer(struct zc0301_device* cam) +{ + struct usb_device *udev = cam->usbdev; + s8 i; + int err = 0; + + if (cam->state & DEV_DISCONNECTED) + return 0; + + for (i = ZC0301_URBS-1; i >= 0; i--) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + kfree(cam->transfer_buffer[i]); + } + + err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + if (err) + DBG(3, "usb_set_interface() failed"); + + return err; +} + + +static int zc0301_stream_interrupt(struct zc0301_device* cam) +{ + long timeout; + + cam->stream = STREAM_INTERRUPT; + timeout = wait_event_timeout(cam->wait_stream, + (cam->stream == STREAM_OFF) || + (cam->state & DEV_DISCONNECTED), + ZC0301_URB_TIMEOUT); + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + else if (cam->stream != STREAM_OFF) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "URB timeout reached. The camera is misconfigured. To " + "use it, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + return 0; +} + +/*****************************************************************************/ + +static int +zc0301_set_compression(struct zc0301_device* cam, + struct v4l2_jpegcompression* compression) +{ + int r, err = 0; + + if ((r = zc0301_read_reg(cam, 0x0008)) < 0) + err += r; + err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality); + + return err ? -EIO : 0; +} + + +static int zc0301_init(struct zc0301_device* cam) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + struct v4l2_queryctrl *qctrl; + struct v4l2_rect* rect; + u8 i = 0; + int err = 0; + + if (!(cam->state & DEV_INITIALIZED)) { + init_waitqueue_head(&cam->open); + qctrl = s->qctrl; + rect = &(s->cropcap.defrect); + cam->compression.quality = ZC0301_COMPRESSION_QUALITY; + } else { /* use current values */ + qctrl = s->_qctrl; + rect = &(s->_rect); + } + + if (s->init) { + err = s->init(cam); + if (err) { + DBG(3, "Sensor initialization failed"); + return err; + } + } + + if ((err = zc0301_set_compression(cam, &cam->compression))) { + DBG(3, "set_compression() failed"); + return err; + } + + if (s->set_crop) + if ((err = s->set_crop(cam, rect))) { + DBG(3, "set_crop() failed"); + return err; + } + + if (s->set_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && + !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { + ctrl.id = s->qctrl[i].id; + ctrl.value = qctrl[i].default_value; + err = s->set_ctrl(cam, &ctrl); + if (err) { + DBG(3, "Set %s control failed", + s->qctrl[i].name); + return err; + } + DBG(3, "Image sensor supports '%s' control", + s->qctrl[i].name); + } + } + + if (!(cam->state & DEV_INITIALIZED)) { + mutex_init(&cam->fileop_mutex); + spin_lock_init(&cam->queue_lock); + init_waitqueue_head(&cam->wait_frame); + init_waitqueue_head(&cam->wait_stream); + cam->nreadbuffers = 2; + memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); + memcpy(&(s->_rect), &(s->cropcap.defrect), + sizeof(struct v4l2_rect)); + cam->state |= DEV_INITIALIZED; + } + + DBG(2, "Initialization succeeded"); + return 0; +} + + +static void zc0301_release_resources(struct zc0301_device* cam) +{ + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + video_set_drvdata(cam->v4ldev, NULL); + video_unregister_device(cam->v4ldev); + kfree(cam->control_buffer); +} + +/*****************************************************************************/ + +static int zc0301_open(struct inode* inode, struct file* filp) +{ + struct zc0301_device* cam; + int err = 0; + + /* + This is the only safe way to prevent race conditions with + disconnect + */ + if (!down_read_trylock(&zc0301_disconnect)) + return -ERESTARTSYS; + + cam = video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->dev_mutex)) { + up_read(&zc0301_disconnect); + return -ERESTARTSYS; + } + + if (cam->users) { + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + if ((filp->f_flags & O_NONBLOCK) || + (filp->f_flags & O_NDELAY)) { + err = -EWOULDBLOCK; + goto out; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->state & DEV_DISCONNECTED + || !cam->users); + if (err) { + up_read(&zc0301_disconnect); + return err; + } + if (cam->state & DEV_DISCONNECTED) { + up_read(&zc0301_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + + if (cam->state & DEV_MISCONFIGURED) { + err = zc0301_init(cam); + if (err) { + DBG(1, "Initialization failed again. " + "I will retry on next open()."); + goto out; + } + cam->state &= ~DEV_MISCONFIGURED; + } + + if ((err = zc0301_start_transfer(cam))) + goto out; + + filp->private_data = cam; + cam->users++; + cam->io = IO_NONE; + cam->stream = STREAM_OFF; + cam->nbuffers = 0; + cam->frame_count = 0; + zc0301_empty_framequeues(cam); + + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + +out: + mutex_unlock(&cam->dev_mutex); + up_read(&zc0301_disconnect); + return err; +} + + +static int zc0301_release(struct inode* inode, struct file* filp) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + zc0301_stop_transfer(cam); + + zc0301_release_buffers(cam); + + if (cam->state & DEV_DISCONNECTED) { + zc0301_release_resources(cam); + usb_put_dev(cam->usbdev); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + wake_up_interruptible_nr(&cam->open, 1); + + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + + mutex_unlock(&cam->dev_mutex); + + return 0; +} + + +static ssize_t +zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_frame_t* f, * i; + unsigned long lock_flags; + long timeout; + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io == IO_MMAP) { + DBG(3, "Close and open the device again to choose the read " + "method"); + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + if (cam->io == IO_NONE) { + if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) { + DBG(1, "read() failed, not enough memory"); + mutex_unlock(&cam->fileop_mutex); + return -ENOMEM; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (list_empty(&cam->inqueue)) { + if (!list_empty(&cam->outqueue)) + zc0301_empty_framequeues(cam); + zc0301_queue_unusedframes(cam); + } + + if (!count) { + mutex_unlock(&cam->fileop_mutex); + return 0; + } + + if (list_empty(&cam->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) { + mutex_unlock(&cam->fileop_mutex); + return timeout; + } + if (cam->state & DEV_DISCONNECTED) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + if (!timeout || (cam->state & DEV_MISCONFIGURED)) { + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + } + + f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame); + + if (count > f->buf.bytesused) + count = f->buf.bytesused; + + if (copy_to_user(buf, f->bufmem, count)) { + err = -EFAULT; + goto exit; + } + *f_pos += count; + +exit: + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(i, &cam->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + zc0301_queue_unusedframes(cam); + + PDBGG("Frame #%lu, bytes read: %zu", + (unsigned long)f->buf.index, count); + + mutex_unlock(&cam->fileop_mutex); + + return err ? err : count; +} + + +static unsigned int zc0301_poll(struct file *filp, poll_table *wait) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_frame_t* f; + unsigned long lock_flags; + unsigned int mask = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return POLLERR; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + goto error; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + goto error; + } + + if (cam->io == IO_NONE) { + if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) { + DBG(1, "poll() failed, not enough memory"); + goto error; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (cam->io == IO_READ) { + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(f, &cam->outqueue, frame) + f->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + zc0301_queue_unusedframes(cam); + } + + poll_wait(filp, &cam->wait_frame, wait); + + if (!list_empty(&cam->outqueue)) + mask |= POLLIN | POLLRDNORM; + + mutex_unlock(&cam->fileop_mutex); + + return mask; + +error: + mutex_unlock(&cam->fileop_mutex); + return POLLERR; +} + + +static void zc0301_vm_open(struct vm_area_struct* vma) +{ + struct zc0301_frame_t* f = vma->vm_private_data; + f->vma_use_count++; +} + + +static void zc0301_vm_close(struct vm_area_struct* vma) +{ + /* NOTE: buffers are not freed here */ + struct zc0301_frame_t* f = vma->vm_private_data; + f->vma_use_count--; +} + + +static struct vm_operations_struct zc0301_vm_ops = { + .open = zc0301_vm_open, + .close = zc0301_vm_close, +}; + + +static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(cam->frame[0].buf.length)) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) { + if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == cam->nbuffers) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; + + pos = cam->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &zc0301_vm_ops; + vma->vm_private_data = &cam->frame[i]; + + zc0301_vm_open(vma); + + mutex_unlock(&cam->fileop_mutex); + + return 0; +} + +/*****************************************************************************/ + +static int +zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_capability cap = { + .driver = "zc0301", + .version = ZC0301_MODULE_VERSION_CODE, + .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, + }; + + strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); + if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) + strlcpy(cap.bus_info, cam->usbdev->dev.bus_id, + sizeof(cap.bus_info)); + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_input i; + + if (copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; + + if (i.index) + return -EINVAL; + + memset(&i, 0, sizeof(i)); + strcpy(i.name, "Camera"); + i.type = V4L2_INPUT_TYPE_CAMERA; + + if (copy_to_user(arg, &i, sizeof(i))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg) +{ + int index = 0; + + if (copy_to_user(arg, &index, sizeof(index))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg) +{ + int index; + + if (copy_from_user(&index, arg, sizeof(index))) + return -EFAULT; + + if (index != 0) + return -EINVAL; + + return 0; +} + + +static int +zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_queryctrl qc; + u8 i; + + if (copy_from_user(&qc, arg, sizeof(qc))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (qc.id && qc.id == s->qctrl[i].id) { + memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); + if (copy_to_user(arg, &qc, sizeof(qc))) + return -EFAULT; + return 0; + } + + return -EINVAL; +} + + +static int +zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + int err = 0; + u8 i; + + if (!s->get_ctrl && !s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + if (!s->get_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + ctrl.value = s->_qctrl[i].default_value; + goto exit; + } + return -EINVAL; + } else + err = s->get_ctrl(cam, &ctrl); + +exit: + if (copy_to_user(arg, &ctrl, sizeof(ctrl))) + return -EFAULT; + + return err; +} + + +static int +zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + u8 i; + int err = 0; + + if (!s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) + return -EINVAL; + if (ctrl.value < s->qctrl[i].minimum || + ctrl.value > s->qctrl[i].maximum) + return -ERANGE; + ctrl.value -= ctrl.value % s->qctrl[i].step; + break; + } + + if ((err = s->set_ctrl(cam, &ctrl))) + return err; + + s->_qctrl[i].default_value = ctrl.value; + + return 0; +} + + +static int +zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_cropcap* cc = &(cam->sensor.cropcap); + + cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cc->pixelaspect.numerator = 1; + cc->pixelaspect.denominator = 1; + + if (copy_to_user(arg, cc, sizeof(*cc))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_crop crop = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + }; + + memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); + + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_crop crop; + struct v4l2_rect* rect; + struct v4l2_rect* bounds = &(s->cropcap.bounds); + const enum zc0301_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&crop, arg, sizeof(crop))) + return -EFAULT; + + rect = &(crop.c); + + if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_CROP failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + if (!s->set_crop) { + memcpy(rect, &(s->_rect), sizeof(*rect)); + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + return 0; + } + + rect->left &= ~7L; + rect->top &= ~7L; + if (rect->width < 8) + rect->width = 8; + if (rect->height < 8) + rect->height = 8; + if (rect->width > bounds->width) + rect->width = bounds->width; + if (rect->height > bounds->height) + rect->height = bounds->height; + if (rect->left < bounds->left) + rect->left = bounds->left; + if (rect->top < bounds->top) + rect->top = bounds->top; + if (rect->left + rect->width > bounds->left + bounds->width) + rect->left = bounds->left+bounds->width - rect->width; + if (rect->top + rect->height > bounds->top + bounds->height) + rect->top = bounds->top+bounds->height - rect->height; + rect->width &= ~7L; + rect->height &= ~7L; + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &crop, sizeof(crop))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + zc0301_release_buffers(cam); + + if (s->set_crop) + err += s->set_crop(cam, rect); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + s->pix_format.width = rect->width; + s->pix_format.height = rect->height; + memcpy(&(s->_rect), rect, sizeof(*rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + zc0301_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + zc0301_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_fmtdesc fmtd; + + if (copy_from_user(&fmtd, arg, sizeof(fmtd))) + return -EFAULT; + + if (fmtd.index == 0) { + strcpy(fmtd.description, "JPEG"); + fmtd.pixelformat = V4L2_PIX_FMT_JPEG; + fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; + } else + return -EINVAL; + + fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); + + if (copy_to_user(arg, &fmtd, sizeof(fmtd))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_format format; + struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pfmt->bytesperline = 0; + pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); + pfmt->field = V4L2_FIELD_NONE; + memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); + + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, + void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_format format; + struct v4l2_pix_format* pix; + struct v4l2_pix_format* pfmt = &(s->pix_format); + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_rect rect; + const enum zc0301_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + pix = &(format.fmt.pix); + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memcpy(&rect, &(s->_rect), sizeof(rect)); + + if (!s->set_crop) { + pix->width = rect.width; + pix->height = rect.height; + } else { + rect.width = pix->width; + rect.height = pix->height; + } + + if (rect.width < 8) + rect.width = 8; + if (rect.height < 8) + rect.height = 8; + if (rect.width > bounds->left + bounds->width - rect.left) + rect.width = bounds->left + bounds->width - rect.left; + if (rect.height > bounds->top + bounds->height - rect.top) + rect.height = bounds->top + bounds->height - rect.top; + rect.width &= ~7L; + rect.height &= ~7L; + + pix->width = rect.width; + pix->height = rect.height; + pix->pixelformat = pfmt->pixelformat; + pix->priv = pfmt->priv; + pix->colorspace = pfmt->colorspace; + pix->bytesperline = 0; + pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); + pix->field = V4L2_FIELD_NONE; + + if (cmd == VIDIOC_TRY_FMT) { + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + return 0; + } + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_FMT failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &format, sizeof(format))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + zc0301_release_buffers(cam); + + if (s->set_crop) + err += s->set_crop(cam, &rect); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + memcpy(pfmt, pix, sizeof(*pix)); + memcpy(&(s->_rect), &rect, sizeof(rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + zc0301_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + zc0301_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg) +{ + if (copy_to_user(arg, &cam->compression, sizeof(cam->compression))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_jpegcompression jc; + const enum zc0301_stream_state stream = cam->stream; + int err = 0; + + if (copy_from_user(&jc, arg, sizeof(jc))) + return -EFAULT; + + if (jc.quality != 0) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + err += zc0301_set_compression(cam, &jc); + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " + "problems. To use the camera, close and open " + "/dev/video%d again.", cam->v4ldev->minor); + return -EIO; + } + + cam->compression.quality = jc.quality; + + cam->stream = stream; + + return 0; +} + + +static int +zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_requestbuffers rb; + u32 i; + int err; + + if (copy_from_user(&rb, arg, sizeof(rb))) + return -EFAULT; + + if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb.memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (cam->io == IO_READ) { + DBG(3, "Close and open the device again to choose the mmap " + "I/O method"); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_REQBUFS failed. " + "Previous buffers are still mapped."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + zc0301_empty_framequeues(cam); + + zc0301_release_buffers(cam); + if (rb.count) + rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP); + + if (copy_to_user(arg, &rb, sizeof(rb))) { + zc0301_release_buffers(cam); + cam->io = IO_NONE; + return -EFAULT; + } + + cam->io = rb.count ? IO_MMAP : IO_NONE; + + return 0; +} + + +static int +zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); + + if (cam->frame[b.index].vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (cam->frame[b.index].state == F_DONE) + b.flags |= V4L2_BUF_FLAG_DONE; + else if (cam->frame[b.index].state != F_UNUSED) + b.flags |= V4L2_BUF_FLAG_QUEUED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + unsigned long lock_flags; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->frame[b.index].state != F_UNUSED) + return -EINVAL; + + cam->frame[b.index].state = F_QUEUED; + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + PDBGG("Frame #%lu queued", (unsigned long)b.index); + + return 0; +} + + +static int +zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp, + void __user * arg) +{ + struct v4l2_buffer b; + struct zc0301_frame_t *f; + unsigned long lock_flags; + long timeout; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->outqueue)) { + if (cam->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) + return timeout; + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + if (!timeout || (cam->state & DEV_MISCONFIGURED)) + return -EIO; + } + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame); + list_del(cam->outqueue.next); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + f->state = F_UNUSED; + + memcpy(&b, &f->buf, sizeof(b)); + if (f->vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); + + return 0; +} + + +static int +zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg) +{ + int type; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->inqueue)) + return -EINVAL; + + cam->stream = STREAM_ON; + + DBG(3, "Stream on"); + + return 0; +} + + +static int +zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg) +{ + int type, err; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + zc0301_empty_framequeues(cam); + + DBG(3, "Stream off"); + + return 0; +} + + +static int +zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + + if (sp.parm.capture.readbuffers == 0) + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES) + sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + cam->nreadbuffers = sp.parm.capture.readbuffers; + + return 0; +} + + +static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOC_QUERYCAP: + return zc0301_vidioc_querycap(cam, arg); + + case VIDIOC_ENUMINPUT: + return zc0301_vidioc_enuminput(cam, arg); + + case VIDIOC_G_INPUT: + return zc0301_vidioc_g_input(cam, arg); + + case VIDIOC_S_INPUT: + return zc0301_vidioc_s_input(cam, arg); + + case VIDIOC_QUERYCTRL: + return zc0301_vidioc_query_ctrl(cam, arg); + + case VIDIOC_G_CTRL: + return zc0301_vidioc_g_ctrl(cam, arg); + + case VIDIOC_S_CTRL_OLD: + case VIDIOC_S_CTRL: + return zc0301_vidioc_s_ctrl(cam, arg); + + case VIDIOC_CROPCAP_OLD: + case VIDIOC_CROPCAP: + return zc0301_vidioc_cropcap(cam, arg); + + case VIDIOC_G_CROP: + return zc0301_vidioc_g_crop(cam, arg); + + case VIDIOC_S_CROP: + return zc0301_vidioc_s_crop(cam, arg); + + case VIDIOC_ENUM_FMT: + return zc0301_vidioc_enum_fmt(cam, arg); + + case VIDIOC_G_FMT: + return zc0301_vidioc_g_fmt(cam, arg); + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + return zc0301_vidioc_try_s_fmt(cam, cmd, arg); + + case VIDIOC_G_JPEGCOMP: + return zc0301_vidioc_g_jpegcomp(cam, arg); + + case VIDIOC_S_JPEGCOMP: + return zc0301_vidioc_s_jpegcomp(cam, arg); + + case VIDIOC_REQBUFS: + return zc0301_vidioc_reqbufs(cam, arg); + + case VIDIOC_QUERYBUF: + return zc0301_vidioc_querybuf(cam, arg); + + case VIDIOC_QBUF: + return zc0301_vidioc_qbuf(cam, arg); + + case VIDIOC_DQBUF: + return zc0301_vidioc_dqbuf(cam, filp, arg); + + case VIDIOC_STREAMON: + return zc0301_vidioc_streamon(cam, arg); + + case VIDIOC_STREAMOFF: + return zc0301_vidioc_streamoff(cam, arg); + + case VIDIOC_G_PARM: + return zc0301_vidioc_g_parm(cam, arg); + + case VIDIOC_S_PARM_OLD: + case VIDIOC_S_PARM: + return zc0301_vidioc_s_parm(cam, arg); + + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYMENU: + return -EINVAL; + + default: + return -EINVAL; + + } +} + + +static int zc0301_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + V4LDBG(3, "zc0301", cmd); + + err = zc0301_ioctl_v4l2(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + + return err; +} + + +static struct file_operations zc0301_fops = { + .owner = THIS_MODULE, + .open = zc0301_open, + .release = zc0301_release, + .ioctl = zc0301_ioctl, + .read = zc0301_read, + .poll = zc0301_poll, + .mmap = zc0301_mmap, + .llseek = no_llseek, +}; + +/*****************************************************************************/ + +static int +zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct zc0301_device* cam; + static unsigned int dev_nr = 0; + unsigned int i; + int err = 0; + + if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL))) + return -ENOMEM; + + cam->usbdev = udev; + + if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) { + DBG(1, "kmalloc() failed"); + err = -ENOMEM; + goto fail; + } + + if (!(cam->v4ldev = video_device_alloc())) { + DBG(1, "video_device_alloc() failed"); + err = -ENOMEM; + goto fail; + } + + mutex_init(&cam->dev_mutex); + + DBG(2, "ZC0301 Image Processor and Control Chip detected " + "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct); + + for (i = 0; zc0301_sensor_table[i]; i++) { + err = zc0301_sensor_table[i](cam); + if (!err) + break; + } + + if (!err) + DBG(2, "%s image sensor detected", cam->sensor.name); + else { + DBG(1, "No supported image sensor detected"); + err = -ENODEV; + goto fail; + } + + if (zc0301_init(cam)) { + DBG(1, "Initialization failed. I will retry on open()."); + cam->state |= DEV_MISCONFIGURED; + } + + strcpy(cam->v4ldev->name, "ZC0301 PC Camera"); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = 0; + cam->v4ldev->fops = &zc0301_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + + mutex_lock(&cam->dev_mutex); + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L2 device registration failed"); + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(1, "Free /dev/videoX node not found"); + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0; + mutex_unlock(&cam->dev_mutex); + goto fail; + } + + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + + cam->module_param.force_munmap = force_munmap[dev_nr]; + cam->module_param.frame_timeout = frame_timeout[dev_nr]; + + dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0; + + usb_set_intfdata(intf, cam); + + mutex_unlock(&cam->dev_mutex); + + return 0; + +fail: + if (cam) { + kfree(cam->control_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + kfree(cam); + } + return err; +} + + +static void zc0301_usb_disconnect(struct usb_interface* intf) +{ + struct zc0301_device* cam = usb_get_intfdata(intf); + + if (!cam) + return; + + down_write(&zc0301_disconnect); + + mutex_lock(&cam->dev_mutex); + + DBG(2, "Disconnecting %s...", cam->v4ldev->name); + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "Device /dev/video%d is open! Deregistration and " + "memory deallocation are deferred on close.", + cam->v4ldev->minor); + cam->state |= DEV_MISCONFIGURED; + zc0301_stop_transfer(cam); + cam->state |= DEV_DISCONNECTED; + wake_up_interruptible(&cam->wait_frame); + wake_up(&cam->wait_stream); + usb_get_dev(cam->usbdev); + } else { + cam->state |= DEV_DISCONNECTED; + zc0301_release_resources(cam); + } + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + + up_write(&zc0301_disconnect); +} + + +static struct usb_driver zc0301_usb_driver = { + .name = "zc0301", + .id_table = zc0301_id_table, + .probe = zc0301_usb_probe, + .disconnect = zc0301_usb_disconnect, +}; + +/*****************************************************************************/ + +static int __init zc0301_module_init(void) +{ + int err = 0; + + KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION); + KDBG(3, ZC0301_MODULE_AUTHOR); + + if ((err = usb_register(&zc0301_usb_driver))) + KDBG(1, "usb_register() failed"); + + return err; +} + + +static void __exit zc0301_module_exit(void) +{ + usb_deregister(&zc0301_usb_driver); +} + + +module_init(zc0301_module_init); +module_exit(zc0301_module_exit); diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c new file mode 100644 index 00000000000..9d282a22c15 --- /dev/null +++ b/drivers/media/video/zc0301/zc0301_pas202bcb.c @@ -0,0 +1,361 @@ +/*************************************************************************** + * Plug-in for PAS202BCB image sensor connected to the ZC030! Image * + * Processor and Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * Initialization values of the ZC0301 have been taken from the SPCA5XX * + * driver maintained by Michel Xhaard <mxhaard@magic.fr> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +/* + NOTE: Sensor controls are disabled for now, becouse changing them while + streaming sometimes results in out-of-sync video frames. We'll use + the default initialization, until we know how to stop and start video + in the chip. However, the image quality still looks good under various + light conditions. +*/ + +#include <linux/delay.h> +#include "zc0301_sensor.h" + + +static struct zc0301_sensor pas202bcb; + + +static int pas202bcb_init(struct zc0301_device* cam) +{ + int err = 0; + + err += zc0301_write_reg(cam, 0x0002, 0x00); + err += zc0301_write_reg(cam, 0x0003, 0x02); + err += zc0301_write_reg(cam, 0x0004, 0x80); + err += zc0301_write_reg(cam, 0x0005, 0x01); + err += zc0301_write_reg(cam, 0x0006, 0xE0); + err += zc0301_write_reg(cam, 0x0098, 0x00); + err += zc0301_write_reg(cam, 0x009A, 0x03); + err += zc0301_write_reg(cam, 0x011A, 0x00); + err += zc0301_write_reg(cam, 0x011C, 0x03); + err += zc0301_write_reg(cam, 0x009B, 0x01); + err += zc0301_write_reg(cam, 0x009C, 0xE6); + err += zc0301_write_reg(cam, 0x009D, 0x02); + err += zc0301_write_reg(cam, 0x009E, 0x86); + + err += zc0301_i2c_write(cam, 0x02, 0x02); + err += zc0301_i2c_write(cam, 0x0A, 0x01); + err += zc0301_i2c_write(cam, 0x0B, 0x01); + err += zc0301_i2c_write(cam, 0x0D, 0x00); + err += zc0301_i2c_write(cam, 0x12, 0x05); + err += zc0301_i2c_write(cam, 0x13, 0x63); + err += zc0301_i2c_write(cam, 0x15, 0x70); + + err += zc0301_write_reg(cam, 0x0101, 0xB7); + err += zc0301_write_reg(cam, 0x0100, 0x0D); + err += zc0301_write_reg(cam, 0x0189, 0x06); + err += zc0301_write_reg(cam, 0x01AD, 0x00); + err += zc0301_write_reg(cam, 0x01C5, 0x03); + err += zc0301_write_reg(cam, 0x01CB, 0x13); + err += zc0301_write_reg(cam, 0x0250, 0x08); + err += zc0301_write_reg(cam, 0x0301, 0x08); + err += zc0301_write_reg(cam, 0x018D, 0x70); + err += zc0301_write_reg(cam, 0x0008, 0x03); + err += zc0301_write_reg(cam, 0x01C6, 0x04); + err += zc0301_write_reg(cam, 0x01CB, 0x07); + err += zc0301_write_reg(cam, 0x0120, 0x11); + err += zc0301_write_reg(cam, 0x0121, 0x37); + err += zc0301_write_reg(cam, 0x0122, 0x58); + err += zc0301_write_reg(cam, 0x0123, 0x79); + err += zc0301_write_reg(cam, 0x0124, 0x91); + err += zc0301_write_reg(cam, 0x0125, 0xA6); + err += zc0301_write_reg(cam, 0x0126, 0xB8); + err += zc0301_write_reg(cam, 0x0127, 0xC7); + err += zc0301_write_reg(cam, 0x0128, 0xD3); + err += zc0301_write_reg(cam, 0x0129, 0xDE); + err += zc0301_write_reg(cam, 0x012A, 0xE6); + err += zc0301_write_reg(cam, 0x012B, 0xED); + err += zc0301_write_reg(cam, 0x012C, 0xF3); + err += zc0301_write_reg(cam, 0x012D, 0xF8); + err += zc0301_write_reg(cam, 0x012E, 0xFB); + err += zc0301_write_reg(cam, 0x012F, 0xFF); + err += zc0301_write_reg(cam, 0x0130, 0x26); + err += zc0301_write_reg(cam, 0x0131, 0x23); + err += zc0301_write_reg(cam, 0x0132, 0x20); + err += zc0301_write_reg(cam, 0x0133, 0x1C); + err += zc0301_write_reg(cam, 0x0134, 0x16); + err += zc0301_write_reg(cam, 0x0135, 0x13); + err += zc0301_write_reg(cam, 0x0136, 0x10); + err += zc0301_write_reg(cam, 0x0137, 0x0D); + err += zc0301_write_reg(cam, 0x0138, 0x0B); + err += zc0301_write_reg(cam, 0x0139, 0x09); + err += zc0301_write_reg(cam, 0x013A, 0x07); + err += zc0301_write_reg(cam, 0x013B, 0x06); + err += zc0301_write_reg(cam, 0x013C, 0x05); + err += zc0301_write_reg(cam, 0x013D, 0x04); + err += zc0301_write_reg(cam, 0x013E, 0x03); + err += zc0301_write_reg(cam, 0x013F, 0x02); + err += zc0301_write_reg(cam, 0x010A, 0x4C); + err += zc0301_write_reg(cam, 0x010B, 0xF5); + err += zc0301_write_reg(cam, 0x010C, 0xFF); + err += zc0301_write_reg(cam, 0x010D, 0xF9); + err += zc0301_write_reg(cam, 0x010E, 0x51); + err += zc0301_write_reg(cam, 0x010F, 0xF5); + err += zc0301_write_reg(cam, 0x0110, 0xFB); + err += zc0301_write_reg(cam, 0x0111, 0xED); + err += zc0301_write_reg(cam, 0x0112, 0x5F); + err += zc0301_write_reg(cam, 0x0180, 0x00); + err += zc0301_write_reg(cam, 0x0019, 0x00); + err += zc0301_write_reg(cam, 0x0087, 0x20); + err += zc0301_write_reg(cam, 0x0088, 0x21); + + err += zc0301_i2c_write(cam, 0x20, 0x02); + err += zc0301_i2c_write(cam, 0x21, 0x1B); + err += zc0301_i2c_write(cam, 0x03, 0x44); + err += zc0301_i2c_write(cam, 0x0E, 0x01); + err += zc0301_i2c_write(cam, 0x0F, 0x00); + + err += zc0301_write_reg(cam, 0x01A9, 0x14); + err += zc0301_write_reg(cam, 0x01AA, 0x24); + err += zc0301_write_reg(cam, 0x0190, 0x00); + err += zc0301_write_reg(cam, 0x0191, 0x02); + err += zc0301_write_reg(cam, 0x0192, 0x1B); + err += zc0301_write_reg(cam, 0x0195, 0x00); + err += zc0301_write_reg(cam, 0x0196, 0x00); + err += zc0301_write_reg(cam, 0x0197, 0x4D); + err += zc0301_write_reg(cam, 0x018C, 0x10); + err += zc0301_write_reg(cam, 0x018F, 0x20); + err += zc0301_write_reg(cam, 0x001D, 0x44); + err += zc0301_write_reg(cam, 0x001E, 0x6F); + err += zc0301_write_reg(cam, 0x001F, 0xAD); + err += zc0301_write_reg(cam, 0x0020, 0xEB); + err += zc0301_write_reg(cam, 0x0087, 0x0F); + err += zc0301_write_reg(cam, 0x0088, 0x0E); + err += zc0301_write_reg(cam, 0x0180, 0x40); + err += zc0301_write_reg(cam, 0x0192, 0x1B); + err += zc0301_write_reg(cam, 0x0191, 0x02); + err += zc0301_write_reg(cam, 0x0190, 0x00); + err += zc0301_write_reg(cam, 0x0116, 0x1D); + err += zc0301_write_reg(cam, 0x0117, 0x40); + err += zc0301_write_reg(cam, 0x0118, 0x99); + err += zc0301_write_reg(cam, 0x0180, 0x42); + err += zc0301_write_reg(cam, 0x0116, 0x1D); + err += zc0301_write_reg(cam, 0x0117, 0x40); + err += zc0301_write_reg(cam, 0x0118, 0x99); + err += zc0301_write_reg(cam, 0x0007, 0x00); + + err += zc0301_i2c_write(cam, 0x11, 0x01); + + msleep(100); + + return err; +} + + +static int pas202bcb_get_ctrl(struct zc0301_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = zc0301_i2c_read(cam, 0x04, 1), + r2 = zc0301_i2c_read(cam, 0x05, 1); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 6) | (r2 & 0x3f); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_GAIN: + if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case ZC0301_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case ZC0301_V4L2_CID_DAC_MAGNITUDE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0) + return -EIO; + return 0; + default: + return -EINVAL; + } +} + + +static int pas202bcb_set_ctrl(struct zc0301_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6); + err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f); + break; + case V4L2_CID_RED_BALANCE: + err += zc0301_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += zc0301_i2c_write(cam, 0x07, ctrl->value); + break; + case V4L2_CID_GAIN: + err += zc0301_i2c_write(cam, 0x10, ctrl->value); + break; + case ZC0301_V4L2_CID_GREEN_BALANCE: + err += zc0301_i2c_write(cam, 0x08, ctrl->value); + break; + case ZC0301_V4L2_CID_DAC_MAGNITUDE: + err += zc0301_i2c_write(cam, 0x0c, ctrl->value); + break; + default: + return -EINVAL; + } + err += zc0301_i2c_write(cam, 0x11, 0x01); + + return err ? -EIO : 0; +} + + +static struct zc0301_sensor pas202bcb = { + .name = "PAS202BCB", + .init = &pas202bcb_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x01e5, + .maximum = 0x3fff, + .step = 0x0001, + .default_value = 0x01e5, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0c, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = ZC0301_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x00, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x01, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x05, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = ZC0301_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x00, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + }, + .get_ctrl = &pas202bcb_get_ctrl, + .set_ctrl = &pas202bcb_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_JPEG, + .priv = 8, + }, +}; + + +int zc0301_probe_pas202bcb(struct zc0301_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + unsigned int pid = 0; + + err += zc0301_write_reg(cam, 0x0000, 0x01); + err += zc0301_write_reg(cam, 0x0010, 0x0e); + err += zc0301_write_reg(cam, 0x0001, 0x01); + err += zc0301_write_reg(cam, 0x0012, 0x03); + err += zc0301_write_reg(cam, 0x0012, 0x01); + err += zc0301_write_reg(cam, 0x008d, 0x08); + + msleep(10); + + r0 = zc0301_i2c_read(cam, 0x00, 1); + r1 = zc0301_i2c_read(cam, 0x01, 1); + + if (r0 < 0 || r1 < 0 || err) + return -EIO; + + pid = (r0 << 4) | ((r1 & 0xf0) >> 4); + if (pid != 0x017) + return -ENODEV; + + zc0301_attach_sensor(cam, &pas202bcb); + + return 0; +} diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h new file mode 100644 index 00000000000..cf0965a81d0 --- /dev/null +++ b/drivers/media/video/zc0301/zc0301_sensor.h @@ -0,0 +1,103 @@ +/*************************************************************************** + * API for image sensors connected to the ZC030! Image Processor and * + * Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ZC0301_SENSOR_H_ +#define _ZC0301_SENSOR_H_ + +#include <linux/usb.h> +#include <linux/videodev.h> +#include <linux/device.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <asm/types.h> + +struct zc0301_device; +struct zc0301_sensor; + +/*****************************************************************************/ + +extern int zc0301_probe_pas202bcb(struct zc0301_device* cam); + +#define ZC0301_SENSOR_TABLE \ +/* Weak detections must go at the end of the list */ \ +static int (*zc0301_sensor_table[])(struct zc0301_device*) = { \ + &zc0301_probe_pas202bcb, \ + NULL, \ +}; + +extern struct zc0301_device* +zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id); + +extern void +zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor); + +#define ZC0301_USB_DEVICE(vend, prod, intclass) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (intclass) + +#define ZC0301_ID_TABLE \ +static const struct usb_device_id zc0301_id_table[] = { \ + { ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, \ + { ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */ \ + { ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131B */ \ + { ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */ \ + { ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */ \ + { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202BCB */ \ + { ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), }, \ + { ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130D */ \ + { } \ +}; + +/*****************************************************************************/ + +extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value); +extern int zc0301_read_reg(struct zc0301_device*, u16 index); +extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value); +extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length); + +/*****************************************************************************/ + +#define ZC0301_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 +#define ZC0301_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE +#define ZC0301_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 + +struct zc0301_sensor { + char name[32]; + + struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS]; + struct v4l2_cropcap cropcap; + struct v4l2_pix_format pix_format; + + int (*init)(struct zc0301_device*); + int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl); + int (*set_ctrl)(struct zc0301_device*, + const struct v4l2_control* ctrl); + int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect); + + /* Private */ + struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +#endif /* _ZC0301_SENSOR_H_ */ |