diff options
Diffstat (limited to 'drivers/media/video')
45 files changed, 3282 insertions, 273 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 84b6fc15519..dcf9fa9264b 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -920,6 +920,8 @@ source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX tristate "USB ZR364XX Camera support" depends on VIDEO_V4L2 + select VIDEOBUF_GEN + select VIDEOBUF_VMALLOC ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index fdb4adff3d2..ca6558c394b 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -3324,8 +3324,6 @@ void __devinit bttv_init_card1(struct bttv *btv) /* initialization part two -- after registering i2c bus */ void __devinit bttv_init_card2(struct bttv *btv) { - int addr=ADDR_UNSET; - btv->tuner_type = UNSET; if (BTTV_BOARD_UNKNOWN == btv->c.type) { @@ -3470,9 +3468,6 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->pll.pll_current = -1; /* tuner configuration (from card list / autodetect / insmod option) */ - if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) - addr = bttv_tvcards[btv->c.type].tuner_addr; - if (UNSET != bttv_tvcards[btv->c.type].tuner_type) if (UNSET == btv->tuner_type) btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; @@ -3496,40 +3491,6 @@ void __devinit bttv_init_card2(struct bttv *btv) if (UNSET == btv->tuner_type) btv->tuner_type = TUNER_ABSENT; - if (btv->tuner_type != TUNER_ABSENT) { - struct tuner_setup tun_setup; - - /* Load tuner module before issuing tuner config call! */ - if (bttv_tvcards[btv->c.type].has_radio) - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_RADIO)); - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); - v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, - &btv->c.i2c_adap, "tuner", "tuner", - v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); - - tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = btv->tuner_type; - tun_setup.addr = addr; - - if (bttv_tvcards[btv->c.type].has_radio) - tun_setup.mode_mask |= T_RADIO; - - bttv_call_all(btv, tuner, s_type_addr, &tun_setup); - } - - if (btv->tda9887_conf) { - struct v4l2_priv_tun_config tda9887_cfg; - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &btv->tda9887_conf; - - bttv_call_all(btv, tuner, s_config, &tda9887_cfg); - } - btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? @@ -3540,15 +3501,15 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->has_remote = remote[btv->c.nr]; if (bttv_tvcards[btv->c.type].has_radio) - btv->has_radio=1; + btv->has_radio = 1; if (bttv_tvcards[btv->c.type].has_remote) - btv->has_remote=1; + btv->has_remote = 1; if (!bttv_tvcards[btv->c.type].no_gpioirq) - btv->gpioirq=1; + btv->gpioirq = 1; if (bttv_tvcards[btv->c.type].volume_gpio) - btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio; + btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; if (bttv_tvcards[btv->c.type].audio_mode_gpio) - btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio; + btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; if (btv->tuner_type == TUNER_ABSENT) return; /* no tuner or related drivers to load */ @@ -3666,6 +3627,49 @@ no_audio: } +/* initialize the tuner */ +void __devinit bttv_init_tuner(struct bttv *btv) +{ + int addr = ADDR_UNSET; + + if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) + addr = bttv_tvcards[btv->c.type].tuner_addr; + + if (btv->tuner_type != TUNER_ABSENT) { + struct tuner_setup tun_setup; + + /* Load tuner module before issuing tuner config call! */ + if (bttv_tvcards[btv->c.type].has_radio) + v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", "tuner", + v4l2_i2c_tuner_addrs(ADDRS_RADIO)); + v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", "tuner", + v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev, + &btv->c.i2c_adap, "tuner", "tuner", + v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); + + tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; + tun_setup.type = btv->tuner_type; + tun_setup.addr = addr; + + if (bttv_tvcards[btv->c.type].has_radio) + tun_setup.mode_mask |= T_RADIO; + + bttv_call_all(btv, tuner, s_type_addr, &tun_setup); + } + + if (btv->tda9887_conf) { + struct v4l2_priv_tun_config tda9887_cfg; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &btv->tda9887_conf; + + bttv_call_all(btv, tuner, s_config, &tda9887_cfg); + } +} + /* ----------------------------------------------------------------------- */ static void modtec_eeprom(struct bttv *btv) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index d147d29bb0d..8cc6dd28d6a 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4419,6 +4419,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, /* some card-specific stuff (needs working i2c) */ bttv_init_card2(btv); + bttv_init_tuner(btv); init_irqreg(btv); /* register video4linux + input */ diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index 3d36daf206f..3ec2402c6b4 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -283,6 +283,7 @@ extern struct tvcard bttv_tvcards[]; extern void bttv_idcard(struct bttv *btv); extern void bttv_init_card1(struct bttv *btv); extern void bttv_init_card2(struct bttv *btv); +extern void bttv_init_tuner(struct bttv *btv); /* card-specific funtions */ extern void tea5757_set_freq(struct bttv *btv, unsigned short freq); diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 10dbd4a11b3..9e39bc5f7b0 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -992,7 +992,7 @@ static int accept_bwqcam(struct parport *port) if (parport[0] && strncmp(parport[0], "auto", 4) != 0) { /* user gave parport parameters */ - for(n=0; parport[n] && n<MAX_CAMS; n++){ + for (n = 0; n < MAX_CAMS && parport[n]; n++) { char *ep; unsigned long r; r = simple_strtoul(parport[n], &ep, 0); diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 5136df19833..93f0dae0135 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -20,6 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA */ +#include <linux/kernel.h> #include "cx18-driver.h" #include "cx18-cards.h" @@ -317,7 +318,7 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) idx = p.audio_properties & 0x03; /* The audio clock of the digitizer must match the codec sample rate otherwise you get some very strange effects. */ - if (idx < sizeof(freqs)) + if (idx < ARRAY_SIZE(freqs)) cx18_call_all(cx, audio, s_clock_freq, freqs[idx]); return err; } diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 428f0c45e6b..1a1048b18f7 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -58,7 +58,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); #define dprintk(level, fmt, arg...)\ do { if (v4l_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\ + printk(KERN_DEBUG "%s: " fmt, \ + (dev) ? dev->name : "cx23885[?]", ## arg); \ } while (0) static struct cx23885_tvnorm cx23885_tvnorms[] = { @@ -1677,6 +1678,7 @@ static struct v4l2_file_operations mpeg_fops = { .read = mpeg_read, .poll = mpeg_poll, .mmap = mpeg_mmap, + .ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { @@ -1713,6 +1715,8 @@ static struct video_device cx23885_mpeg_template = { .fops = &mpeg_fops, .ioctl_ops = &mpeg_ioctl_ops, .minor = -1, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, }; void cx23885_417_unregister(struct cx23885_dev *dev) diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index a5cc1c1fc2d..39465301ec9 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -3003,6 +3003,14 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_GENIATECH_X8000_MT: + /* FIXME: For this board, the xc3028 never recovers after being + powered down (the reset GPIO probably is not set properly). + We don't have access to the hardware so we cannot determine + which GPIO is used for xc3028, so just disable power xc3028 + power management for now */ + ctl->disable_power_mgmt = 1; + break; case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index c44e8760021..e237b507659 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -501,6 +501,7 @@ static struct zl10353_config cx88_pinnacle_hybrid_pctv = { static struct zl10353_config cx88_geniatech_x8000_mt = { .demod_address = (0x1e >> 1), .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, }; static struct s5h1411_config dvico_fusionhdtv7_config = { diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index da4e3912cd3..7172dcf2a4f 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -116,6 +116,10 @@ static int cx8802_start_dma(struct cx8802_dev *dev, udelay(100); break; case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Enable MPEG parallel IO and video signal pins */ + cx_write(MO_PINMUX_IO, 0x88); + cx_write(TS_SOP_STAT, 0); + cx_write(TS_VALERR_CNTRL, 0); break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: /* Enable MPEG parallel IO and video signal pins */ diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ebd24a25fb8..ed281f56594 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -58,8 +58,6 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); -#define MT9V011_VERSION 0x8243 - /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -159,6 +157,20 @@ static struct em28xx_reg_seq evga_indtube_digital[] = { { -1, -1, -1, -1}, }; +/* Pinnacle Hybrid Pro eb1a:2881 */ +static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { + {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -205,13 +217,15 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = { */ struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { - .name = "Unknown EM2750/EM2751 webcam grabber", - .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .name = "EM2710/EM2750/EM2751 webcam grabber", + .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, } }, }, [EM2800_BOARD_UNKNOWN] = { @@ -233,13 +247,15 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .tuner_type = TUNER_ABSENT, + .is_webcam = 1, /* To enable sensor probe */ }, [EM2750_BOARD_DLCW_130] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "Huaqi DLCW-130", .valid = EM28XX_BOARD_NOT_VALIDATED, .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -440,7 +456,8 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -450,8 +467,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_SILVERCREST_WEBCAM] = { .name = "Silvercrest Webcam 1.3mpix", .tuner_type = TUNER_ABSENT, - .is_27xx = 1, - .decoder = EM28XX_MT9V011, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -500,7 +516,8 @@ struct em28xx_board em28xx_boards[] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "NetGMBH Cam", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -605,22 +622,27 @@ struct em28xx_board em28xx_boards[] = { }, [EM2861_BOARD_PLEXTOR_PX_TV100U] = { .name = "Plextor ConvertX PX-TV100U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, + .xclk = EM28XX_XCLK_I2S_MSB_TIMING | + EM28XX_XCLK_FREQUENCY_12MHZ, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, } }, }, @@ -1250,25 +1272,26 @@ struct em28xx_board em28xx_boards[] = { }, [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { .name = "Pinnacle Hybrid Pro", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = pinnacle_hybrid_pro_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, } }, }, [EM2882_BOARD_PINNACLE_HYBRID_PRO] = { @@ -1526,6 +1549,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2710), + .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), @@ -1638,6 +1663,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, + {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1704,6 +1730,32 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* FIXME: Should be replaced by a proper mt9m001 driver */ +static int em28xx_initialize_mt9m001(struct em28xx *dev) +{ + int i; + unsigned char regs[][3] = { + { 0x0d, 0x00, 0x01, }, + { 0x0d, 0x00, 0x00, }, + { 0x04, 0x05, 0x00, }, /* hres = 1280 */ + { 0x03, 0x04, 0x00, }, /* vres = 1024 */ + { 0x20, 0x11, 0x00, }, + { 0x06, 0x00, 0x10, }, + { 0x2b, 0x00, 0x24, }, + { 0x2e, 0x00, 0x24, }, + { 0x35, 0x00, 0x24, }, + { 0x2d, 0x00, 0x20, }, + { 0x2c, 0x00, 0x20, }, + { 0x09, 0x0a, 0xd4, }, + { 0x35, 0x00, 0x57, }, + }; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, ®s[i][0], 3); + + return 0; +} + /* HINT method: webcam I2C chips * * This method work for webcams with Micron sensors @@ -1716,9 +1768,7 @@ static int em28xx_hint_sensor(struct em28xx *dev) __be16 version_be; u16 version; - if (dev->model != EM2820_BOARD_UNKNOWN) - return 0; - + /* Micron sensor detection */ dev->i2c_client.addr = 0xba >> 1; cmd = 0; i2c_master_send(&dev->i2c_client, &cmd, 1); @@ -1727,18 +1777,57 @@ static int em28xx_hint_sensor(struct em28xx *dev) return -EINVAL; version = be16_to_cpu(version_be); - switch (version) { - case MT9V011_VERSION: + case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */ + case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + em28xx_set_model(dev); + sensor_name = "mt9v011"; + dev->em28xx_sensor = EM28XX_MT9V011; + dev->sensor_xres = 640; + dev->sensor_yres = 480; + /* + * FIXME: mt9v011 uses I2S speed as xtal clk - at least with + * the Silvercrest cam I have here for testing - for higher + * resolutions, a high clock cause horizontal artifacts, so we + * need to use a lower xclk frequency. + * Yet, it would be possible to adjust xclk depending on the + * desired resolution, since this affects directly the + * frame rate. + */ + dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ; + dev->sensor_xtal = 4300000; + + /* probably means GRGB 16 bit bayer */ + dev->vinmode = 0x0d; + dev->vinctl = 0x00; + + break; + case 0x8431: + dev->model = EM2750_BOARD_UNKNOWN; + em28xx_set_model(dev); + + sensor_name = "mt9m001"; + dev->em28xx_sensor = EM28XX_MT9M001; + em28xx_initialize_mt9m001(dev); + dev->sensor_xres = 1280; + dev->sensor_yres = 1024; + + /* probably means BGGR 16 bit bayer */ + dev->vinmode = 0x0c; + dev->vinctl = 0x00; + break; default: - printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); return -EINVAL; } - em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + /* Setup webcam defaults */ + em28xx_pre_card_setup(dev); + + em28xx_errdev("Sensor is %s, using model %s entry.\n", sensor_name, em28xx_boards[dev->model].name); return 0; @@ -1749,63 +1838,6 @@ static int em28xx_hint_sensor(struct em28xx *dev) */ void em28xx_pre_card_setup(struct em28xx *dev) { - int rc; - - em28xx_set_model(dev); - - em28xx_info("Identified as %s (card=%d)\n", - dev->board.name, dev->model); - - /* Set the default GPO/GPIO for legacy devices */ - dev->reg_gpo_num = EM2880_R04_GPO; - dev->reg_gpio_num = EM28XX_R08_GPIO; - - dev->wait_after_write = 5; - - /* Based on the Chip ID, set the device configuration */ - rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); - if (rc > 0) { - dev->chip_id = rc; - - switch (dev->chip_id) { - case CHIP_ID_EM2750: - em28xx_info("chip ID is em2750\n"); - break; - case CHIP_ID_EM2820: - if (dev->board.is_27xx) - em28xx_info("chip is em2710\n"); - else - em28xx_info("chip ID is em2820\n"); - break; - case CHIP_ID_EM2840: - em28xx_info("chip ID is em2840\n"); - break; - case CHIP_ID_EM2860: - em28xx_info("chip ID is em2860\n"); - break; - case CHIP_ID_EM2870: - em28xx_info("chip ID is em2870\n"); - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2874: - em28xx_info("chip ID is em2874\n"); - dev->reg_gpio_num = EM2874_R80_GPIO; - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2883: - em28xx_info("chip ID is em2882/em2883\n"); - dev->wait_after_write = 0; - break; - default: - em28xx_info("em28xx chip ID = %d\n", dev->chip_id); - } - } - - /* Prepopulate cached GPO register content */ - rc = em28xx_read_reg(dev, dev->reg_gpo_num); - if (rc >= 0) - dev->reg_gpo = rc; - /* Set the initial XCLK and I2C clock values based on the board definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); @@ -1815,9 +1847,8 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* request some modules */ switch (dev->model) { case EM2861_BOARD_PLEXTOR_PX_TV100U: - /* FIXME guess */ - /* Turn on analog audio output */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + /* Sets the msp34xx I2S speed */ + dev->i2s_speed = 2048000; break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: @@ -1929,6 +1960,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: @@ -2154,7 +2186,20 @@ void em28xx_register_i2c_ir(struct em28xx *dev) void em28xx_card_setup(struct em28xx *dev) { - em28xx_set_model(dev); + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->board.is_webcam) { + if (em28xx_hint_sensor(dev) < 0) + dev->board.is_webcam = 0; + else + dev->progressive = 1; + } else + em28xx_set_model(dev); + + em28xx_info("Identified as %s (card=%d)\n", + dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; if (em28xx_boards[dev->model].tuner_addr) @@ -2225,12 +2270,9 @@ void em28xx_card_setup(struct em28xx *dev) em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, so make the call now so the analog GPIOs are set properly before probing the i2c bus. */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); |