diff options
Diffstat (limited to 'drivers/media/video/ov7670.c')
| -rw-r--r-- | drivers/media/video/ov7670.c | 286 |
1 files changed, 251 insertions, 35 deletions
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index aaa50f9b8e7..91c886ab15c 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -198,6 +198,7 @@ struct ov7670_info { struct ov7670_format_struct *fmt; /* Current format */ unsigned char sat; /* Saturation value */ int hue; /* Hue value */ + u8 clkrc; /* Clock divider value */ }; static inline struct ov7670_info *to_state(struct v4l2_subdev *sd) @@ -351,7 +352,7 @@ static struct regval_list ov7670_default_regs[] = { static struct regval_list ov7670_fmt_yuv422[] = { { REG_COM7, 0x0 }, /* Selects YUV mode */ { REG_RGB444, 0 }, /* No RGB444 please */ - { REG_COM1, 0 }, + { REG_COM1, 0 }, /* CCIR601 */ { REG_COM15, COM15_R00FF }, { REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */ { 0x4f, 0x80 }, /* "matrix coefficient 1" */ @@ -367,7 +368,7 @@ static struct regval_list ov7670_fmt_yuv422[] = { static struct regval_list ov7670_fmt_rgb565[] = { { REG_COM7, COM7_RGB }, /* Selects RGB mode */ { REG_RGB444, 0 }, /* No RGB444 please */ - { REG_COM1, 0x0 }, + { REG_COM1, 0x0 }, /* CCIR601 */ { REG_COM15, COM15_RGB565 }, { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ @@ -383,7 +384,7 @@ static struct regval_list ov7670_fmt_rgb565[] = { static struct regval_list ov7670_fmt_rgb444[] = { { REG_COM7, COM7_RGB }, /* Selects RGB mode */ { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */ - { REG_COM1, 0x40 }, /* Magic reserved bit */ + { REG_COM1, 0x0 }, /* CCIR601 */ { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */ { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ @@ -408,8 +409,13 @@ static struct regval_list ov7670_fmt_raw[] = { /* * Low-level register I/O. + * + * Note that there are two versions of these. On the XO 1, the + * i2c controller only does SMBUS, so that's what we use. The + * ov7670 is not really an SMBUS device, though, so the communication + * is not always entirely reliable. */ - +#ifdef CONFIG_OLPC_XO_1 static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg, unsigned char *value) { @@ -432,9 +438,67 @@ static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg, int ret = i2c_smbus_write_byte_data(client, reg, value); if (reg == REG_COM7 && (value & COM7_RESET)) - msleep(2); /* Wait for reset to run */ + msleep(5); /* Wait for reset to run */ + return ret; +} + +#else /* ! CONFIG_OLPC_XO_1 */ +/* + * On most platforms, we'd rather do straight i2c I/O. + */ +static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 data = reg; + struct i2c_msg msg; + int ret; + + /* + * Send out the register address... + */ + msg.addr = client->addr; + msg.flags = 0; + msg.len = 1; + msg.buf = &data; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + printk(KERN_ERR "Error %d on register write\n", ret); + return ret; + } + /* + * ...then read back the result. + */ + msg.flags = I2C_M_RD; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret >= 0) { + *value = data; + ret = 0; + } + return ret; +} + + +static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_msg msg; + unsigned char data[2] = { reg, value }; + int ret; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = data; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret > 0) + ret = 0; + if (reg == REG_COM7 && (value & COM7_RESET)) + msleep(5); /* Wait for reset to run */ return ret; } +#endif /* CONFIG_OLPC_XO_1 */ /* @@ -744,22 +808,12 @@ static int ov7670_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) struct ov7670_format_struct *ovfmt; struct ov7670_win_size *wsize; struct ov7670_info *info = to_state(sd); - unsigned char com7, clkrc = 0; + unsigned char com7; ret = ov7670_try_fmt_internal(sd, fmt, &ovfmt, &wsize); if (ret) return ret; /* - * HACK: if we're running rgb565 we need to grab then rewrite - * CLKRC. If we're *not*, however, then rewriting clkrc hoses - * the colors. - */ - if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB565) { - ret = ov7670_read(sd, REG_CLKRC, &clkrc); - if (ret) - return ret; - } - /* * COM7 is a pain in the ass, it doesn't like to be read then * quickly written afterward. But we have everything we need * to set it absolutely here, as long as the format-specific @@ -779,8 +833,18 @@ static int ov7670_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) ret = ov7670_write_array(sd, wsize->regs); info->fmt = ovfmt; - if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB565 && ret == 0) - ret = ov7670_write(sd, REG_CLKRC, clkrc); + /* + * If we're running RGB565, we must rewrite clkrc after setting + * the other parameters or the image looks poor. If we're *not* + * doing RGB565, we must not rewrite clkrc or the image looks + * *really* poor. + * + * (Update) Now that we retain clkrc state, we should be able + * to write it unconditionally, and that will make the frame + * rate persistent too. + */ + if (ret == 0) + ret = ov7670_write(sd, REG_CLKRC, info->clkrc); return ret; } @@ -791,20 +855,17 @@ static int ov7670_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) static int ov7670_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) { struct v4l2_captureparm *cp = &parms->parm.capture; - unsigned char clkrc; - int ret; + struct ov7670_info *info = to_state(sd); if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - ret = ov7670_read(sd, REG_CLKRC, &clkrc); - if (ret < 0) - return ret; + memset(cp, 0, sizeof(struct v4l2_captureparm)); cp->capability = V4L2_CAP_TIMEPERFRAME; cp->timeperframe.numerator = 1; cp->timeperframe.denominator = OV7670_FRAME_RATE; - if ((clkrc & CLK_EXT) == 0 && (clkrc & CLK_SCALE) > 1) - cp->timeperframe.denominator /= (clkrc & CLK_SCALE); + if ((info->clkrc & CLK_EXT) == 0 && (info->clkrc & CLK_SCALE) > 1) + cp->timeperframe.denominator /= (info->clkrc & CLK_SCALE); return 0; } @@ -812,19 +873,14 @@ static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) { struct v4l2_captureparm *cp = &parms->parm.capture; struct v4l2_fract *tpf = &cp->timeperframe; - unsigned char clkrc; - int ret, div; + struct ov7670_info *info = to_state(sd); + int div; if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; if (cp->extendedmode != 0) return -EINVAL; - /* - * CLKRC has a reserved bit, so let's preserve it. - */ - ret = ov7670_read(sd, REG_CLKRC, &clkrc); - if (ret < 0) - return ret; + if (tpf->numerator == 0 || tpf->denominator == 0) div = 1; /* Reset to full rate */ else @@ -833,10 +889,10 @@ static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) div = 1; else if (div > CLK_SCALE) div = CLK_SCALE; - clkrc = (clkrc & 0x80) | div; + info->clkrc = (info->clkrc & 0x80) | div; tpf->numerator = 1; tpf->denominator = OV7670_FRAME_RATE/div; - return ov7670_write(sd, REG_CLKRC, clkrc); + return ov7670_write(sd, REG_CLKRC, info->clkrc); } @@ -1115,6 +1171,140 @@ static int ov7670_s_vflip(struct v4l2_subdev *sd, int value) return ret; } +/* + * GAIN is split between REG_GAIN and REG_VREF[7:6]. If one believes + * the data sheet, the VREF parts should be the most significant, but + * experience shows otherwise. There seems to be little value in + * messing with the VREF bits, so we leave them alone. + */ +static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char gain; + + ret = ov7670_read(sd, REG_GAIN, &gain); + *value = gain; + return ret; +} + +static int ov7670_s_gain(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com8; + + ret = ov7670_write(sd, REG_GAIN, value & 0xff); + /* Have to turn off AGC as well */ + if (ret == 0) { + ret = ov7670_read(sd, REG_COM8, &com8); + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC); + } + return ret; +} + +/* + * Tweak autogain. + */ +static int ov7670_g_autogain(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + *value = (com8 & COM8_AGC) != 0; + return ret; +} + +static int ov7670_s_autogain(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (ret == 0) { + if (value) + com8 |= COM8_AGC; + else + com8 &= ~COM8_AGC; + ret = ov7670_write(sd, REG_COM8, com8); + } + return ret; +} + +/* + * Exposure is spread all over the place: top 6 bits in AECHH, middle + * 8 in AECH, and two stashed in COM1 just for the hell of it. + */ +static int ov7670_g_exp(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char com1, aech, aechh; + + ret = ov7670_read(sd, REG_COM1, &com1) + + ov7670_read(sd, REG_AECH, &aech) + + ov7670_read(sd, REG_AECHH, &aechh); + *value = ((aechh & 0x3f) << 10) | (aech << 2) | (com1 & 0x03); + return ret; +} + +static int ov7670_s_exp(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com1, com8, aech, aechh; + + ret = ov7670_read(sd, REG_COM1, &com1) + + ov7670_read(sd, REG_COM8, &com8); + ov7670_read(sd, REG_AECHH, &aechh); + if (ret) + return ret; + + com1 = (com1 & 0xfc) | (value & 0x03); + aech = (value >> 2) & 0xff; + aechh = (aechh & 0xc0) | ((value >> 10) & 0x3f); + ret = ov7670_write(sd, REG_COM1, com1) + + ov7670_write(sd, REG_AECH, aech) + + ov7670_write(sd, REG_AECHH, aechh); + /* Have to turn off AEC as well */ + if (ret == 0) + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AEC); + return ret; +} + +/* + * Tweak autoexposure. + */ +static int ov7670_g_autoexp(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char com8; + enum v4l2_exposure_auto_type *atype = (enum v4l2_exposure_auto_type *) value; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (com8 & COM8_AEC) + *atype = V4L2_EXPOSURE_AUTO; + else + *atype = V4L2_EXPOSURE_MANUAL; + return ret; +} + +static int ov7670_s_autoexp(struct v4l2_subdev *sd, + enum v4l2_exposure_auto_type value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (ret == 0) { + if (value == V4L2_EXPOSURE_AUTO) + com8 |= COM8_AEC; + else + com8 &= ~COM8_AEC; + ret = ov7670_write(sd, REG_COM8, com8); + } + return ret; +} + + + static int ov7670_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) { @@ -1131,6 +1321,14 @@ static int ov7670_queryctrl(struct v4l2_subdev *sd, return v4l2_ctrl_query_fill(qc, 0, 256, 1, 128); case V4L2_CID_HUE: return v4l2_ctrl_query_fill(qc, -180, 180, 5, 0); + case V4L2_CID_GAIN: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); + case V4L2_CID_AUTOGAIN: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); + case V4L2_CID_EXPOSURE: + return v4l2_ctrl_query_fill(qc, 0, 65535, 1, 500); + case V4L2_CID_EXPOSURE_AUTO: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); } return -EINVAL; } @@ -1150,6 +1348,14 @@ static int ov7670_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) return ov7670_g_vflip(sd, &ctrl->value); case V4L2_CID_HFLIP: return ov7670_g_hflip(sd, &ctrl->value); + case V4L2_CID_GAIN: + return ov7670_g_gain(sd, &ctrl->value); + case V4L2_CID_AUTOGAIN: + return ov7670_g_autogain(sd, &ctrl->value); + case V4L2_CID_EXPOSURE: + return ov7670_g_exp(sd, &ctrl->value); + case V4L2_CID_EXPOSURE_AUTO: + return ov7670_g_autoexp(sd, &ctrl->value); } return -EINVAL; } @@ -1169,6 +1375,15 @@ static int ov7670_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) return ov7670_s_vflip(sd, ctrl->value); case V4L2_CID_HFLIP: return ov7670_s_hflip(sd, ctrl->value); + case V4L2_CID_GAIN: + return ov7670_s_gain(sd, ctrl->value); + case V4L2_CID_AUTOGAIN: + return ov7670_s_autogain(sd, ctrl->value); + case V4L2_CID_EXPOSURE: + return ov7670_s_exp(sd, ctrl->value); + case V4L2_CID_EXPOSURE_AUTO: + return ov7670_s_autoexp(sd, + (enum v4l2_exposure_auto_type) ctrl->value); } return -EINVAL; } @@ -1268,6 +1483,7 @@ static int ov7670_probe(struct i2c_client *client, info->fmt = &ov7670_formats[0]; info->sat = 128; /* Review this */ + info->clkrc = 1; /* 30fps */ return 0; } |