diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-dvb.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 156 |
1 files changed, 150 insertions, 6 deletions
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1dc070da865..48a975134ac 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -45,12 +45,15 @@ #include "dibx000_common.h" #include "zl10353.h" #include "stv0900.h" +#include "stv0900_reg.h" #include "stv6110.h" #include "lnbh24.h" #include "cx24116.h" #include "cimax2.h" +#include "lgs8gxx.h" #include "netup-eeprom.h" #include "netup-init.h" +#include "lgdt3305.h" static unsigned int debug; @@ -122,7 +125,22 @@ static struct tda10048_config hauppauge_hvr1200_config = { .demod_address = 0x10 >> 1, .output_mode = TDA10048_SERIAL_OUTPUT, .fwbulkwritelen = TDA10048_BULKWRITE_200, - .inversion = TDA10048_INVERSION_ON + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, + .clk_freq_khz = TDA10048_CLK_16000, +}; + +static struct tda10048_config hauppauge_hvr1210_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, }; static struct s5h1409_config hauppauge_ezqam_config = { @@ -194,6 +212,16 @@ static struct s5h1411_config dvico_s5h1411_config = { .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, @@ -215,15 +243,51 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = { .if_lvl = 6, .rfagc_top = 0x37 }, }; +static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .std_map = &hauppauge_hvr1200_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; +static struct tda18271_config hauppauge_hvr1210_tuner_config = { + .gate = TDA18271_GATE_DIGITAL, +}; + +static struct tda18271_std_map hauppauge_hvr127x_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x58 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x58 }, +}; + +static struct tda18271_config hauppauge_hvr127x_config = { + .std_map = &hauppauge_hvr127x_std_map, +}; + +static struct lgdt3305_config hauppauge_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 1, + .qam_if_khz = 4000, + .vsb_if_khz = 3250, +}; + static struct dibx000_agc_config xc3028_agc_config = { BAND_VHF | BAND_UHF, /* band_caps */ @@ -317,13 +381,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .disable_i2c_gate_ctrl = 1, }; +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + static struct stv0900_config netup_stv0900_config = { .demod_address = 0x68, .xtal = 27000000, .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ .diseqc_mode = 2,/* 2/3 PWM */ - .path1_mode = 2,/*Serial continues clock */ - .path2_mode = 2,/*Serial continues clock */ + .ts_config_regs = stv0900_ts_regs, .tun1_maddress = 0,/* 0x60 */ .tun2_maddress = 3,/* 0x63 */ .tun1_adc = 1,/* 1 Vpp */ @@ -368,10 +444,29 @@ static struct cx24116_config dvbworld_cx24116_config = { .demod_address = 0x05, }; +static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { + .prod = LGS8GXX_PROD_LGS8GL5, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 5380, /* 5.38 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 0, + .if_neg_edge = 0, +}; + +static struct xc5000_config mygica_x8506_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; - struct cx23885_i2c *i2c_bus = NULL; + struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; struct videobuf_dvb_frontend *fe0; int ret; @@ -396,6 +491,29 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_generic_tunerconfig, 0); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt3305_attach, + &hauppauge_lgdt3305_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr127x_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1255: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: i2c_bus = &dev->i2c_bus[0]; switch (alt_tuner) { @@ -496,6 +614,17 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1200_tuner_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1210: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1210_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1210_tuner_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1400: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(dib7000p_attach, @@ -630,7 +759,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x09)) + LNBH24_PCL, + LNBH24_TTX, 0x09)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -650,7 +780,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x0a)) + LNBH24_PCL, + LNBH24_TTX, 0x0a)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -659,6 +790,19 @@ static int dvb_register(struct cx23885_tsport *port) break; } break; + case CX23885_BOARD_MYGICA_X8506: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &mygica_x8506_lgs8gl5_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &mygica_x8506_xc5000_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", |