1 files changed, 298 insertions, 68 deletions

diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
index 6fc6b026005..754f66bfdf4 100644
--- a/drivers/media/video/bt8xx/bttv-vbi.c
+++ b/drivers/media/video/bt8xx/bttv-vbi.c
@@ -5,6 +5,9 @@
 
     (c) 2002 Gerd Knorr <kraxel@bytesex.org>
 
+    Copyright (C) 2005, 2006 Michael H. Schimek <mschimek@gmx.at>
+    Sponsored by OPQ Systems AB
+
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
@@ -41,8 +44,15 @@
    to be about 244.  */
 #define VBI_OFFSET 244
 
+/* 2048 for compatibility with earlier driver versions. The driver
+   really stores 1024 + tvnorm->vbipack * 4 samples per line in the
+   buffer. Note tvnorm->vbipack is <= 0xFF (limit of VBIPACK_LO + HI
+   is 0x1FF DWORDs) and VBI read()s store a frame counter in the last
+   four bytes of the VBI image. */
+#define VBI_BPL 2048
+
+/* Compatibility. */
 #define VBI_DEFLINES 16
-#define VBI_MAXLINES 32
 
 static unsigned int vbibufs = 4;
 static unsigned int vbi_debug = 0;
@@ -58,21 +68,12 @@ MODULE_PARM_DESC(vbi_debug,"vbi code debug messages, default is 0 (no)");
 #define dprintk(fmt, arg...)	if (vbi_debug) \
 	printk(KERN_DEBUG "bttv%d/vbi: " fmt, btv->c.nr , ## arg)
 
+#define IMAGE_SIZE(fmt) \
+	(((fmt)->count[0] + (fmt)->count[1]) * (fmt)->samples_per_line)
+
 /* ----------------------------------------------------------------------- */
 /* vbi risc code + mm                                                      */
 
-static int
-vbi_buffer_risc(struct bttv *btv, struct bttv_buffer *buf, int lines)
-{
-	int bpl = 2048;
-
-	bttv_risc_packed(btv, &buf->top, buf->vb.dma.sglist,
-			 0, bpl-4, 4, lines);
-	bttv_risc_packed(btv, &buf->bottom, buf->vb.dma.sglist,
-			 lines * bpl, bpl-4, 4, lines);
-	return 0;
-}
-
 static int vbi_buffer_setup(struct videobuf_queue *q,
 			    unsigned int *count, unsigned int *size)
 {
@@ -81,8 +82,16 @@ static int vbi_buffer_setup(struct videobuf_queue *q,
 
 	if (0 == *count)
 		*count = vbibufs;
-	*size = fh->lines * 2 * 2048;
-	dprintk("setup: lines=%d\n",fh->lines);
+
+	*size = IMAGE_SIZE(&fh->vbi_fmt.fmt);
+
+	dprintk("setup: samples=%u start=%d,%d count=%u,%u\n",
+		fh->vbi_fmt.fmt.samples_per_line,
+		fh->vbi_fmt.fmt.start[0],
+		fh->vbi_fmt.fmt.start[1],
+		fh->vbi_fmt.fmt.count[0],
+		fh->vbi_fmt.fmt.count[1]);
+
 	return 0;
 }
 
@@ -93,18 +102,93 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
 	struct bttv_fh *fh = q->priv_data;
 	struct bttv *btv = fh->btv;
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
+	const struct bttv_tvnorm *tvnorm;
+	unsigned int skip_lines0, skip_lines1, min_vdelay;
+	int redo_dma_risc;
 	int rc;
 
-	buf->vb.size = fh->lines * 2 * 2048;
+	buf->vb.size = IMAGE_SIZE(&fh->vbi_fmt.fmt);
 	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
 		return -EINVAL;
 
+	tvnorm = fh->vbi_fmt.tvnorm;
+
+	/* There's no VBI_VDELAY register, RISC must skip the lines
+	   we don't want. With default parameters we skip zero lines
+	   as earlier driver versions did. The driver permits video
+	   standard changes while capturing, so we use vbi_fmt.tvnorm
+	   instead of btv->tvnorm to skip zero lines after video
+	   standard changes as well. */
+
+	skip_lines0 = 0;
+	skip_lines1 = 0;
+
+	if (fh->vbi_fmt.fmt.count[0] > 0)
+		skip_lines0 = max(0, (fh->vbi_fmt.fmt.start[0]
+				      - tvnorm->vbistart[0]));
+	if (fh->vbi_fmt.fmt.count[1] > 0)
+		skip_lines1 = max(0, (fh->vbi_fmt.fmt.start[1]
+				      - tvnorm->vbistart[1]));
+
+	redo_dma_risc = 0;
+
+	if (buf->vbi_skip[0] != skip_lines0 ||
+	    buf->vbi_skip[1] != skip_lines1 ||
+	    buf->vbi_count[0] != fh->vbi_fmt.fmt.count[0] ||
+	    buf->vbi_count[1] != fh->vbi_fmt.fmt.count[1]) {
+		buf->vbi_skip[0] = skip_lines0;
+		buf->vbi_skip[1] = skip_lines1;
+		buf->vbi_count[0] = fh->vbi_fmt.fmt.count[0];
+		buf->vbi_count[1] = fh->vbi_fmt.fmt.count[1];
+		redo_dma_risc = 1;
+	}
+
 	if (STATE_NEEDS_INIT == buf->vb.state) {
+		redo_dma_risc = 1;
 		if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL)))
 			goto fail;
-		if (0 != (rc = vbi_buffer_risc(btv,buf,fh->lines)))
-			goto fail;
 	}
+
+	if (redo_dma_risc) {
+		unsigned int bpl, padding, offset;
+
+		bpl = 2044; /* max. vbipack */
+		padding = VBI_BPL - bpl;
+
+		if (fh->vbi_fmt.fmt.count[0] > 0) {
+			rc = bttv_risc_packed(btv, &buf->top,
+					      buf->vb.dma.sglist,
+					      /* offset */ 0, bpl,
+					      padding, skip_lines0,
+					      fh->vbi_fmt.fmt.count[0]);
+			if (0 != rc)
+				goto fail;
+		}
+
+		if (fh->vbi_fmt.fmt.count[1] > 0) {
+			offset = fh->vbi_fmt.fmt.count[0] * VBI_BPL;
+
+			rc = bttv_risc_packed(btv, &buf->bottom,
+					      buf->vb.dma.sglist,
+					      offset, bpl,
+					      padding, skip_lines1,
+					      fh->vbi_fmt.fmt.count[1]);
+			if (0 != rc)
+				goto fail;
+		}
+	}
+
+	/* VBI capturing ends at VDELAY, start of video capturing,
+	   no matter where the RISC program ends. VDELAY minimum is 2,
+	   bounds.top is the corresponding first field line number
+	   times two. VDELAY counts half field lines. */
+	min_vdelay = MIN_VDELAY;
+	if (fh->vbi_fmt.end >= tvnorm->cropcap.bounds.top)
+		min_vdelay += fh->vbi_fmt.end - tvnorm->cropcap.bounds.top;
+
+	/* For bttv_buffer_activate_vbi(). */
+	buf->geo.vdelay = min_vdelay;
+
 	buf->vb.state = STATE_PREPARED;
 	buf->vb.field = field;
 	dprintk("buf prepare %p: top=%p bottom=%p field=%s\n",
@@ -152,69 +236,215 @@ struct videobuf_queue_ops bttv_vbi_qops = {
 
 /* ----------------------------------------------------------------------- */
 
-void bttv_vbi_setlines(struct bttv_fh *fh, struct bttv *btv, int lines)
+static int
+try_fmt			(struct v4l2_vbi_format *	f,
+			 const struct bttv_tvnorm *	tvnorm,
+			 __s32				crop_start)
 {
-	int vdelay;
-
-	if (lines < 1)
-		lines = 1;
-	if (lines > VBI_MAXLINES)
-		lines = VBI_MAXLINES;
-	fh->lines = lines;
-
-	vdelay = btread(BT848_E_VDELAY_LO);
-	if (vdelay < lines*2) {
-		vdelay = lines*2;
-		btwrite(vdelay,BT848_E_VDELAY_LO);
-		btwrite(vdelay,BT848_O_VDELAY_LO);
+	__s32 min_start, max_start, max_end, f2_offset;
+	unsigned int i;
+
+	/* For compatibility with earlier driver versions we must pretend
+	   the VBI and video capture window may overlap. In reality RISC
+	   magic aborts VBI capturing at the first line of video capturing,
+	   leaving the rest of the buffer unchanged, usually all zero.
+	   VBI capturing must always start before video capturing. >> 1
+	   because cropping counts field lines times two. */
+	min_start = tvnorm->vbistart[0];
+	max_start = (crop_start >> 1) - 1;
+	max_end = (tvnorm->cropcap.bounds.top
+		   + tvnorm->cropcap.bounds.height) >> 1;
+
+	if (min_start > max_start)
+		return -EBUSY;
+
+	BUG_ON(max_start >= max_end);
+
+	f->sampling_rate    = tvnorm->Fsc;
+	f->samples_per_line = VBI_BPL;
+	f->sample_format    = V4L2_PIX_FMT_GREY;
+	f->offset           = VBI_OFFSET;
+
+	f2_offset = tvnorm->vbistart[1] - tvnorm->vbistart[0];
+
+	for (i = 0; i < 2; ++i) {
+		if (0 == f->count[i]) {
+			/* No data from this field. We leave f->start[i]
+			   alone because VIDIOCSVBIFMT is w/o and EINVALs
+			   when a driver does not support exactly the
+			   requested parameters. */
+		} else {
+			s64 start, count;
+
+			start = clamp(f->start[i], min_start, max_start);
+			/* s64 to prevent overflow. */
+			count = (s64) f->start[i] + f->count[i] - start;
+			f->start[i] = start;
+			f->count[i] = clamp(count, (s64) 1,
+					    max_end - start);
+		}
+
+		min_start += f2_offset;
+		max_start += f2_offset;
+		max_end += f2_offset;
 	}
+
+	if (0 == (f->count[0] | f->count[1])) {
+		/* As in earlier driver versions. */
+		f->start[0] = tvnorm->vbistart[0];
+		f->start[1] = tvnorm->vbistart[1];
+		f->count[0] = 1;
+		f->count[1] = 1;
+	}
+
+	f->flags = 0;
+
+	f->reserved[0] = 0;
+	f->reserved[1] = 0;
+
+	return 0;
 }
 
-void bttv_vbi_try_fmt(struct bttv_fh *fh, struct v4l2_format *f)
+int
+bttv_vbi_try_fmt	(struct bttv_fh *		fh,
+			 struct v4l2_vbi_format *	f)
 {
+	struct bttv *btv = fh->btv;
 	const struct bttv_tvnorm *tvnorm;
-	s64 count0,count1,count;
+	__s32 crop_start;
 
-	tvnorm = &bttv_tvnorms[fh->btv->tvnorm];
-	f->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-	f->fmt.vbi.sampling_rate    = tvnorm->Fsc;
-	f->fmt.vbi.samples_per_line = 2048;
-	f->fmt.vbi.sample_format    = V4L2_PIX_FMT_GREY;
-	f->fmt.vbi.offset           = VBI_OFFSET;
-	f->fmt.vbi.flags            = 0;
-
-	/* s64 to prevent overflow. */
-	count0 = (s64) f->fmt.vbi.start[0] + f->fmt.vbi.count[0]
-		- tvnorm->vbistart[0];
-	count1 = (s64) f->fmt.vbi.start[1] + f->fmt.vbi.count[1]
-		- tvnorm->vbistart[1];
-	count  = clamp (max (count0, count1), (s64) 1, (s64) VBI_MAXLINES);
-
-	f->fmt.vbi.start[0] = tvnorm->vbistart[0];
-	f->fmt.vbi.start[1] = tvnorm->vbistart[1];
-	f->fmt.vbi.count[0] = count;
-	f->fmt.vbi.count[1] = count;
-
-	f->fmt.vbi.reserved[0] = 0;
-	f->fmt.vbi.reserved[1] = 0;
+	mutex_lock(&btv->lock);
+
+	tvnorm = &bttv_tvnorms[btv->tvnorm];
+	crop_start = btv->crop_start;
+
+	mutex_unlock(&btv->lock);
+
+	return try_fmt(f, tvnorm, crop_start);
 }
 
-void bttv_vbi_get_fmt(struct bttv_fh *fh, struct v4l2_format *f)
+int
+bttv_vbi_set_fmt	(struct bttv_fh *		fh,
+			 struct v4l2_vbi_format *	f)
 {
+	struct bttv *btv = fh->btv;
 	const struct bttv_tvnorm *tvnorm;
+	__s32 start1, end;
+	int rc;
+
+	mutex_lock(&btv->lock);
+
+	rc = -EBUSY;
+	if (fh->resources & RESOURCE_VBI)
+		goto fail;
+
+	tvnorm = &bttv_tvnorms[btv->tvnorm];
+
+	rc = try_fmt(f, tvnorm, btv->crop_start);
+	if (0 != rc)
+		goto fail;
+
+	start1 = f->start[1] - tvnorm->vbistart[1] + tvnorm->vbistart[0];
+
+	/* First possible line of video capturing. Should be
+	   max(f->start[0] + f->count[0], start1 + f->count[1]) * 2
+	   when capturing both fields. But for compatibility we must
+	   pretend the VBI and video capture window may overlap,
+	   so end = start + 1, the lowest possible value, times two
+	   because vbi_fmt.end counts field lines times two. */
+	end = max(f->start[0], start1) * 2 + 2;
+
+	mutex_lock(&fh->vbi.lock);
+
+	fh->vbi_fmt.fmt    = *f;
+	fh->vbi_fmt.tvnorm = tvnorm;
+	fh->vbi_fmt.end    = end;
+
+	mutex_unlock(&fh->vbi.lock);
+
+	rc = 0;
+
+ fail:
+	mutex_unlock(&btv->lock);
+
+	return rc;
+}
+
+void
+bttv_vbi_get_fmt	(struct bttv_fh *		fh,
+			 struct v4l2_vbi_format *	f)
+{
+	const struct bttv_tvnorm *tvnorm;
+
+	*f = fh->vbi_fmt.fmt;
 
 	tvnorm = &bttv_tvnorms[fh->btv->tvnorm];
-	memset(f,0,sizeof(*f));
-	f->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-	f->fmt.vbi.sampling_rate    = tvnorm->Fsc;
-	f->fmt.vbi.samples_per_line = 2048;
-	f->fmt.vbi.sample_format    = V4L2_PIX_FMT_GREY;
-	f->fmt.vbi.offset           = VBI_OFFSET;
-	f->fmt.vbi.start[0]         = tvnorm->vbistart[0];
-	f->fmt.vbi.start[1]         = tvnorm->vbistart[1];
-	f->fmt.vbi.count[0]         = fh->lines;
-	f->fmt.vbi.count[1]         = fh->lines;
-	f->fmt.vbi.flags            = 0;
+
+	if (tvnorm != fh->vbi_fmt.tvnorm) {
+		__s32 max_end;
+		unsigned int i;
+
+		/* As in vbi_buffer_prepare() this imitates the
+		   behaviour of earlier driver versions after video
+		   standard changes, with default parameters anyway. */
+
+		max_end = (tvnorm->cropcap.bounds.top
+			   + tvnorm->cropcap.bounds.height) >> 1;
+
+		f->sampling_rate = tvnorm->Fsc;
+
+		for (i = 0; i < 2; ++i) {
+			__s32 new_start;
+
+			new_start = f->start[i]
+				+ tvnorm->vbistart[i]
+				- fh->vbi_fmt.tvnorm->vbistart[i];
+
+			f->start[i] = min(new_start, max_end - 1);
+			f->count[i] = min((__s32) f->count[i],
+					  max_end - f->start[i]);
+
+			max_end += tvnorm->vbistart[1]
+				- tvnorm->vbistart[0];
+		}
+	}
+}
+
+void
+bttv_vbi_fmt_reset	(struct bttv_vbi_fmt *		f,
+			 int				norm)
+{
+	const struct bttv_tvnorm *tvnorm;
+	unsigned int real_samples_per_line;
+	unsigned int real_count;
+
+	tvnorm = &bttv_tvnorms[norm];
+
+	f->fmt.sampling_rate    = tvnorm->Fsc;
+	f->fmt.samples_per_line = VBI_BPL;
+	f->fmt.sample_format    = V4L2_PIX_FMT_GREY;
+	f->fmt.offset           = VBI_OFFSET;
+	f->fmt.start[0]		= tvnorm->vbistart[0];
+	f->fmt.start[1]		= tvnorm->vbistart[1];
+	f->fmt.count[0]		= VBI_DEFLINES;
+	f->fmt.count[1]		= VBI_DEFLINES;
+	f->fmt.flags            = 0;
+	f->fmt.reserved[0]      = 0;
+	f->fmt.reserved[1]      = 0;
+
+	/* For compatibility the buffer size must be 2 * VBI_DEFLINES *
+	   VBI_BPL regardless of the current video standard. */
+	real_samples_per_line   = 1024 + tvnorm->vbipack * 4;
+	real_count              = ((tvnorm->cropcap.defrect.top >> 1)
+				   - tvnorm->vbistart[0]);
+
+	BUG_ON(real_samples_per_line > VBI_BPL);
+	BUG_ON(real_count > VBI_DEFLINES);
+
+	f->tvnorm               = tvnorm;
+
+	/* See bttv_vbi_fmt_set(). */
+	f->end                  = tvnorm->vbistart[0] * 2 + 2;
 }
 
 /* ----------------------------------------------------------------------- */