diff options
Diffstat (limited to 'drivers/media/v4l2-core/tuner-core.c')
| -rw-r--r-- | drivers/media/v4l2-core/tuner-core.c | 1354 |
1 files changed, 1354 insertions, 0 deletions
diff --git a/drivers/media/v4l2-core/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c new file mode 100644 index 00000000000..b5a819af2b8 --- /dev/null +++ b/drivers/media/v4l2-core/tuner-core.c @@ -0,0 +1,1354 @@ +/* + * i2c tv tuner chip device driver + * core core, i.e. kernel interfaces, registering and so on + * + * Copyright(c) by Ralph Metzler, Gerd Knorr, Gunther Mayer + * + * Copyright(c) 2005-2011 by Mauro Carvalho Chehab + * - Added support for a separate Radio tuner + * - Major rework and cleanups at the code + * + * This driver supports many devices and the idea is to let the driver + * detect which device is present. So rather than listing all supported + * devices here, we pretend to support a single, fake device type that will + * handle both radio and analog TV tuning. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/poll.h> +#include <linux/i2c.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/videodev2.h> +#include <media/tuner.h> +#include <media/tuner-types.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include "mt20xx.h" +#include "tda8290.h" +#include "tea5761.h" +#include "tea5767.h" +#include "tuner-xc2028.h" +#include "tuner-simple.h" +#include "tda9887.h" +#include "xc5000.h" +#include "tda18271.h" +#include "xc4000.h" + +#define UNSET (-1U) + +#define PREFIX (t->i2c->driver->driver.name) + +/* + * Driver modprobe parameters + */ + +/* insmod options used at init time => read/only */ +static unsigned int addr; +static unsigned int no_autodetect; +static unsigned int show_i2c; + +module_param(addr, int, 0444); +module_param(no_autodetect, int, 0444); +module_param(show_i2c, int, 0444); + +/* insmod options used at runtime => read/write */ +static int tuner_debug; +static unsigned int tv_range[2] = { 44, 958 }; +static unsigned int radio_range[2] = { 65, 108 }; +static char pal[] = "--"; +static char secam[] = "--"; +static char ntsc[] = "-"; + +module_param_named(debug, tuner_debug, int, 0644); +module_param_array(tv_range, int, NULL, 0644); +module_param_array(radio_range, int, NULL, 0644); +module_param_string(pal, pal, sizeof(pal), 0644); +module_param_string(secam, secam, sizeof(secam), 0644); +module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); + +/* + * Static vars + */ + +static LIST_HEAD(tuner_list); +static const struct v4l2_subdev_ops tuner_ops; + +/* + * Debug macros + */ + +#define tuner_warn(fmt, arg...) do { \ + printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_dbg(fmt, arg...) do { \ + if (tuner_debug) \ + printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +/* + * Internal struct used inside the driver + */ + +struct tuner { + /* device */ + struct dvb_frontend fe; + struct i2c_client *i2c; + struct v4l2_subdev sd; + struct list_head list; + + /* keep track of the current settings */ + v4l2_std_id std; + unsigned int tv_freq; + unsigned int radio_freq; + unsigned int audmode; + + enum v4l2_tuner_type mode; + unsigned int mode_mask; /* Combination of allowable modes */ + + bool standby; /* Standby mode */ + + unsigned int type; /* chip type id */ + unsigned int config; + const char *name; +}; + +/* + * Function prototypes + */ + +static void set_tv_freq(struct i2c_client *c, unsigned int freq); +static void set_radio_freq(struct i2c_client *c, unsigned int freq); + +/* + * tuner attach/detach logic + */ + +/* This macro allows us to probe dynamically, avoiding static links */ +#ifdef CONFIG_MEDIA_ATTACH +#define tuner_symbol_probe(FUNCTION, ARGS...) ({ \ + int __r = -EINVAL; \ + typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ + if (__a) { \ + __r = (int) __a(ARGS); \ + symbol_put(FUNCTION); \ + } else { \ + printk(KERN_ERR "TUNER: Unable to find " \ + "symbol "#FUNCTION"()\n"); \ + } \ + __r; \ +}) + +static void tuner_detach(struct dvb_frontend *fe) +{ + if (fe->ops.tuner_ops.release) { + fe->ops.tuner_ops.release(fe); + symbol_put_addr(fe->ops.tuner_ops.release); + } + if (fe->ops.analog_ops.release) { + fe->ops.analog_ops.release(fe); + symbol_put_addr(fe->ops.analog_ops.release); + } +} +#else +#define tuner_symbol_probe(FUNCTION, ARGS...) ({ \ + FUNCTION(ARGS); \ +}) + +static void tuner_detach(struct dvb_frontend *fe) +{ + if (fe->ops.tuner_ops.release) + fe->ops.tuner_ops.release(fe); + if (fe->ops.analog_ops.release) + fe->ops.analog_ops.release(fe); +} +#endif + + +static inline struct tuner *to_tuner(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tuner, sd); +} + +/* + * struct analog_demod_ops callbacks + */ + +static void fe_set_params(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; + struct tuner *t = fe->analog_demod_priv; + + if (NULL == fe_tuner_ops->set_analog_params) { + tuner_warn("Tuner frontend module has no way to set freq\n"); + return; + } + fe_tuner_ops->set_analog_params(fe, params); +} + +static void fe_standby(struct dvb_frontend *fe) +{ + struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; + + if (fe_tuner_ops->sleep) + fe_tuner_ops->sleep(fe); +} + +static int fe_has_signal(struct dvb_frontend *fe) +{ + u16 strength = 0; + + if (fe->ops.tuner_ops.get_rf_strength) + fe->ops.tuner_ops.get_rf_strength(fe, &strength); + + return strength; +} + +static int fe_get_afc(struct dvb_frontend *fe) +{ + s32 afc = 0; + + if (fe->ops.tuner_ops.get_afc) + fe->ops.tuner_ops.get_afc(fe, &afc); + + return 0; +} + +static int fe_set_config(struct dvb_frontend *fe, void *priv_cfg) +{ + struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; + struct tuner *t = fe->analog_demod_priv; + + if (fe_tuner_ops->set_config) + return fe_tuner_ops->set_config(fe, priv_cfg); + + tuner_warn("Tuner frontend module has no way to set config\n"); + + return 0; +} + +static void tuner_status(struct dvb_frontend *fe); + +static struct analog_demod_ops tuner_analog_ops = { + .set_params = fe_set_params, + .standby = fe_standby, + .has_signal = fe_has_signal, + .get_afc = fe_get_afc, + .set_config = fe_set_config, + .tuner_status = tuner_status +}; + +/* + * Functions to select between radio and TV and tuner probe/remove functions + */ + +/** + * set_type - Sets the tuner type for a given device + * + * @c: i2c_client descriptoy + * @type: type of the tuner (e. g. tuner number) + * @new_mode_mask: Indicates if tuner supports TV and/or Radio + * @new_config: an optional parameter ranging from 0-255 used by + a few tuners to adjust an internal parameter, + like LNA mode + * @tuner_callback: an optional function to be called when switching + * to analog mode + * + * This function applys the tuner config to tuner specified + * by tun_setup structure. It contains several per-tuner initialization "magic" + */ +static void set_type(struct i2c_client *c, unsigned int type, + unsigned int new_mode_mask, unsigned int new_config, + int (*tuner_callback) (void *dev, int component, int cmd, int arg)) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + unsigned char buffer[4]; + int tune_now = 1; + + if (type == UNSET || type == TUNER_ABSENT) { + tuner_dbg("tuner 0x%02x: Tuner type absent\n", c->addr); + return; + } + + t->type = type; + /* prevent invalid config values */ + t->config = new_config < 256 ? new_config : 0; + if (tuner_callback != NULL) { + tuner_dbg("defining GPIO callback\n"); + t->fe.callback = tuner_callback; + } + + /* discard private data, in case set_type() was previously called */ + tuner_detach(&t->fe); + t->fe.analog_demod_priv = NULL; + + switch (t->type) { + case TUNER_MT2032: + if (!dvb_attach(microtune_attach, + &t->fe, t->i2c->adapter, t->i2c->addr)) + goto attach_failed; + break; + case TUNER_PHILIPS_TDA8290: + { + struct tda829x_config cfg = { + .lna_cfg = t->config, + }; + if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter, + t->i2c->addr, &cfg)) + goto attach_failed; + break; + } + case TUNER_TEA5767: + if (!dvb_attach(tea5767_attach, &t->fe, + t->i2c->adapter, t->i2c->addr)) + goto attach_failed; + t->mode_mask = T_RADIO; + break; + case TUNER_TEA5761: + if (!dvb_attach(tea5761_attach, &t->fe, + t->i2c->adapter, t->i2c->addr)) + goto attach_failed; + t->mode_mask = T_RADIO; + break; + case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: + buffer[0] = 0x0b; + buffer[1] = 0xdc; + buffer[2] = 0x9c; + buffer[3] = 0x60; + i2c_master_send(c, buffer, 4); + mdelay(1); + buffer[2] = 0x86; + buffer[3] = 0x54; + i2c_master_send(c, buffer, 4); + if (!dvb_attach(simple_tuner_attach, &t->fe, + t->i2c->adapter, t->i2c->addr, t->type)) + goto attach_failed; + break; + case TUNER_PHILIPS_TD1316: + buffer[0] = 0x0b; + buffer[1] = 0xdc; + buffer[2] = 0x86; + buffer[3] = 0xa4; + i2c_master_send(c, buffer, 4); + if (!dvb_attach(simple_tuner_attach, &t->fe, + t->i2c->adapter, t->i2c->addr, t->type)) + goto attach_failed; + break; + case TUNER_XC2028: + { + struct xc2028_config cfg = { + .i2c_adap = t->i2c->adapter, + .i2c_addr = t->i2c->addr, + }; + if (!dvb_attach(xc2028_attach, &t->fe, &cfg)) + goto attach_failed; + tune_now = 0; + break; + } + case TUNER_TDA9887: + if (!dvb_attach(tda9887_attach, + &t->fe, t->i2c->adapter, t->i2c->addr)) + goto attach_failed; + break; + case TUNER_XC5000: + { + struct xc5000_config xc5000_cfg = { + .i2c_address = t->i2c->addr, + /* if_khz will be set at dvb_attach() */ + .if_khz = 0, + }; + + if (!dvb_attach(xc5000_attach, + &t->fe, t->i2c->adapter, &xc5000_cfg)) + goto attach_failed; + tune_now = 0; + break; + } + case TUNER_XC5000C: + { + struct xc5000_config xc5000c_cfg = { + .i2c_address = t->i2c->addr, + /* if_khz will be set at dvb_attach() */ + .if_khz = 0, + .chip_id = XC5000C, + }; + + if (!dvb_attach(xc5000_attach, + &t->fe, t->i2c->adapter, &xc5000c_cfg)) + goto attach_failed; + tune_now = 0; + break; + } + case TUNER_NXP_TDA18271: + { + struct tda18271_config cfg = { + .config = t->config, + .small_i2c = TDA18271_03_BYTE_CHUNK_INIT, + }; + + if (!dvb_attach(tda18271_attach, &t->fe, t->i2c->addr, + t->i2c->adapter, &cfg)) + goto attach_failed; + tune_now = 0; + break; + } + case TUNER_XC4000: + { + struct xc4000_config xc4000_cfg = { + .i2c_address = t->i2c->addr, + /* FIXME: the correct parameters will be set */ + /* only when the digital dvb_attach() occurs */ + .default_pm = 0, + .dvb_amplitude = 0, + .set_smoothedcvbs = 0, + .if_khz = 0 + }; + if (!dvb_attach(xc4000_attach, + &t->fe, t->i2c->adapter, &xc4000_cfg)) + goto attach_failed; + tune_now = 0; + break; + } + default: + if (!dvb_attach(simple_tuner_attach, &t->fe, + t->i2c->adapter, t->i2c->addr, t->type)) + goto attach_failed; + + break; + } + + if ((NULL == analog_ops->set_params) && + (fe_tuner_ops->set_analog_params)) { + + t->name = fe_tuner_ops->info.name; + + t->fe.analog_demod_priv = t; + memcpy(analog_ops, &tuner_analog_ops, + sizeof(struct analog_demod_ops)); + + } else { + t->name = analog_ops->info.name; + } + + tuner_dbg("type set to %s\n", t->name); + + t->mode_mask = new_mode_mask; + + /* Some tuners require more initialization setup before use, + such as firmware download or device calibration. + trying to set a frequency here will just fail + FIXME: better to move set_freq to the tuner code. This is needed + on analog tuners for PLL to properly work + */ + if (tune_now) { + if (V4L2_TUNER_RADIO == t->mode) + set_radio_freq(c, t->radio_freq); + else + set_tv_freq(c, t->tv_freq); + } + + tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n", + c->adapter->name, c->driver->driver.name, c->addr << 1, type, + t->mode_mask); + return; + +attach_failed: + tuner_dbg("Tuner attach for type = %d failed.\n", t->type); + t->type = TUNER_ABSENT; + + return; +} + +/** + * tuner_s_type_addr - Sets the tuner type for a device + * + * @sd: subdev descriptor + * @tun_setup: type to be associated to a given tuner i2c address + * + * This function applys the tuner config to tuner specified + * by tun_setup structure. + * If tuner I2C address is UNSET, then it will only set the device + * if the tuner supports the mode specified in the call. + * If the address is specified, the change will be applied only if + * tuner I2C address matches. + * The call can change the tuner number and the tuner mode. + */ +static int tuner_s_type_addr(struct v4l2_subdev *sd, + struct tuner_setup *tun_setup) +{ + struct tuner *t = to_tuner(sd); + struct i2c_client *c = v4l2_get_subdevdata(sd); + + tuner_dbg("Calling set_type_addr for type=%d, addr=0x%02x, mode=0x%02x, config=0x%02x\n", + tun_setup->type, + tun_setup->addr, + tun_setup->mode_mask, + tun_setup->config); + + if ((t->type == UNSET && ((tun_setup->addr == ADDR_UNSET) && + (t->mode_mask & tun_setup->mode_mask))) || + (tun_setup->addr == c->addr)) { + set_type(c, tun_setup->type, tun_setup->mode_mask, + tun_setup->config, tun_setup->tuner_callback); + } else + tuner_dbg("set addr discarded for type %i, mask %x. " + "Asked to change tuner at addr 0x%02x, with mask %x\n", + t->type, t->mode_mask, + tun_setup->addr, tun_setup->mode_mask); + + return 0; +} + +/** + * tuner_s_config - Sets tuner configuration + * + * @sd: subdev descriptor + * @cfg: tuner configuration + * + * Calls tuner set_config() private function to set some tuner-internal + * parameters + */ +static int tuner_s_config(struct v4l2_subdev *sd, + const struct v4l2_priv_tun_config *cfg) +{ + struct tuner *t = to_tuner(sd); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + if (t->type != cfg->tuner) + return 0; + + if (analog_ops->set_config) { + analog_ops->set_config(&t->fe, cfg->priv); + return 0; + } + + tuner_dbg("Tuner frontend module has no way to set config\n"); + return 0; +} + +/** + * tuner_lookup - Seek for tuner adapters + * + * @adap: i2c_adapter struct + * @radio: pointer to be filled if the adapter is radio + * @tv: pointer to be filled if the adapter is TV + * + * Search for existing radio and/or TV tuners on the given I2C adapter, + * discarding demod-only adapters (tda9887). + * + * Note that when this function is called from tuner_probe you can be + * certain no other devices will be added/deleted at the same time, I2C + * core protects against that. + */ +static void tuner_lookup(struct i2c_adapter *adap, + struct tuner **radio, struct tuner **tv) +{ + struct tuner *pos; + + *radio = NULL; + *tv = NULL; + + list_for_each_entry(pos, &tuner_list, list) { + int mode_mask; + + if (pos->i2c->adapter != adap || + strcmp(pos->i2c->driver->driver.name, "tuner")) + continue; + + mode_mask = pos->mode_mask; + if (*radio == NULL && mode_mask == T_RADIO) + *radio = pos; + /* Note: currently TDA9887 is the only demod-only + device. If other devices appear then we need to + make this test more general. */ + else if (*tv == NULL && pos->type != TUNER_TDA9887 && + (pos->mode_mask & T_ANALOG_TV)) + *tv = pos; + } +} + +/** + *tuner_probe - Probes the existing tuners on an I2C bus + * + * @client: i2c_client descriptor + * @id: not used + * + * This routine probes for tuners at the expected I2C addresses. On most + * cases, if a device answers to a given I2C address, it assumes that the + * device is a tuner. On a few cases, however, an additional logic is needed + * to double check if the device is really a tuner, or to identify the tuner + * type, like on tea5767/5761 devices. + * + * During client attach, set_type is called by adapter's attach_inform callback. + * set_type must then be completed by tuner_probe. + */ +static int tuner_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tuner *t; + struct tuner *radio; + struct tuner *tv; + + t = kzalloc(sizeof(struct tuner), GFP_KERNEL); + if (NULL == t) + return -ENOMEM; + v4l2_i2c_subdev_init(&t->sd, client, &tuner_ops); + t->i2c = client; + t->name = "(tuner unset)"; + t->type = UNSET; + t->audmode = V4L2_TUNER_MODE_STEREO; + t->standby = 1; + t->radio_freq = 87.5 * 16000; /* Initial freq range */ + t->tv_freq = 400 * 16; /* Sets freq to VHF High - needed for some PLL's to properly start */ + + if (show_i2c) { + unsigned char buffer[16]; + int i, rc; + + memset(buffer, 0, sizeof(buffer)); + rc = i2c_master_recv(client, buffer, sizeof(buffer)); + tuner_info("I2C RECV = "); + for (i = 0; i < rc; i++) + printk(KERN_CONT "%02x ", buffer[i]); + printk("\n"); + } + + /* autodetection code based on the i2c addr */ + if (!no_autodetect) { + switch (client->addr) { + case 0x10: + if (tuner_symbol_probe(tea5761_autodetection, + t->i2c->adapter, + t->i2c->addr) >= 0) { + t->type = TUNER_TEA5761; + t->mode_mask = T_RADIO; + tuner_lookup(t->i2c->adapter, &radio, &tv); + if (tv) + tv->mode_mask &= ~T_RADIO; + + goto register_client; + } + kfree(t); + return -ENODEV; + case 0x42: + case 0x43: + case 0x4a: + case 0x4b: + /* If chip is not tda8290, don't register. + since it can be tda9887*/ + if (tuner_symbol_probe(tda829x_probe, t->i2c->adapter, + t->i2c->addr) >= 0) { + tuner_dbg("tda829x detected\n"); + } else { + /* Default is being tda9887 */ + t->type = TUNER_TDA9887; + t->mode_mask = T_RADIO | T_ANALOG_TV; + goto register_client; + } + break; + case 0x60: + if (tuner_symbol_probe(tea5767_autodetection, + t->i2c->adapter, t->i2c->addr) + >= 0) { + t->type = TUNER_TEA5767; + t->mode_mask = T_RADIO; + /* Sets freq to FM range */ + tuner_lookup(t->i2c->adapter, &radio, &tv); + if (tv) + tv->mode_mask &= ~T_RADIO; + + goto register_client; + } + break; + } + } + + /* Initializes only the first TV tuner on this adapter. Why only the + first? Because there are some devices (notably the ones with TI + tuners) that have more than one i2c address for the *same* device. + Experience shows that, except for just one case, the first + address is the right one. The exception is a Russian tuner + (ACORP_Y878F). So, the desired behavior is just to enable the + first found TV tuner. */ + tuner_lookup(t->i2c->adapter, &radio, &tv); + if (tv == NULL) { + t->mode_mask = T_ANALOG_TV; + if (radio == NULL) + t->mode_mask |= T_RADIO; + tuner_dbg("Setting mode_mask to 0x%02x\n", t->mode_mask); + } + + /* Should be just before return */ +register_client: + /* Sets a default mode */ + if (t->mode_mask & T_ANALOG_TV) + t->mode = V4L2_TUNER_ANALOG_TV; + else + t->mode = V4L2_TUNER_RADIO; + set_type(client, t->type, t->mode_mask, t->config, t->fe.callback); + list_add_tail(&t->list, &tuner_list); + + tuner_info("Tuner %d found with type(s)%s%s.\n", + t->type, + t->mode_mask & T_RADIO ? " Radio" : "", + t->mode_mask & T_ANALOG_TV ? " TV" : ""); + return 0; +} + +/** + * tuner_remove - detaches a tuner + * + * @client: i2c_client descriptor + */ + +static int tuner_remove(struct i2c_client *client) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(client)); + + v4l2_device_unregister_subdev(&t->sd); + tuner_detach(&t->fe); + t->fe.analog_demod_priv = NULL; + + list_del(&t->list); + kfree(t); + return 0; +} + +/* + * Functions to switch between Radio and TV + * + * A few cards have a separate I2C tuner for radio. Those routines + * take care of switching between TV/Radio mode, filtering only the + * commands that apply to the Radio or TV tuner. + */ + +/** + * check_mode - Verify if tuner supports the requested mode + * @t: a pointer to the module's internal struct_tuner + * + * This function checks if the tuner is capable of tuning analog TV, + * digital TV or radio, depending on what the caller wants. If the + * tuner can't support that mode, it returns -EINVAL. Otherwise, it + * returns 0. + * This function is needed for boards that have a separate tuner for + * radio (like devices with tea5767). + * NOTE: mt20xx uses V4L2_TUNER_DIGITAL_TV and calls set_tv_freq to + * select a TV frequency. So, t_mode = T_ANALOG_TV could actually + * be used to represent a Digital TV too. + */ +static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode) +{ + int t_mode; + if (mode == V4L2_TUNER_RADIO) + t_mode = T_RADIO; + else + t_mode = T_ANALOG_TV; + + if ((t_mode & t->mode_mask) == 0) + return -EINVAL; + + return 0; +} + +/** + * set_mode - Switch tuner to other mode. + * @t: a pointer to the module's internal struct_tuner + * @mode: enum v4l2_type (radio or TV) + * + * If tuner doesn't support the needed mode (radio or TV), prints a + * debug message and returns -EINVAL, changing its state to standby. + * Otherwise, changes the mode and returns 0. + */ +static int set_mode(struct tuner *t, enum v4l2_tuner_type mode) +{ + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + if (mode != t->mode) { + if (check_mode(t, mode) == -EINVAL) { + tuner_dbg("Tuner doesn't support mode %d. " + "Putting tuner to sleep\n", mode); + t->standby = true; + if (analog_ops->standby) + analog_ops->standby(&t->fe); + return -EINVAL; + } + t->mode = mode; + tuner_dbg("Changing to mode %d\n", mode); + } + return 0; +} + +/** + * set_freq - Set the tuner to the desired frequency. + * @t: a pointer to the module's internal struct_tuner + * @freq: frequency to set (0 means to use the current frequency) + */ +static void set_freq(struct tuner *t, unsigned int freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(&t->sd); + + if (t->mode == V4L2_TUNER_RADIO) { + if (!freq) + freq = t->radio_freq; + set_radio_freq(client, freq); + } else { + if (!freq) + freq = t->tv_freq; + set_tv_freq(client, freq); + } +} + +/* + * Functions that are specific for TV mode + */ + +/** + * set_tv_freq - Set tuner frequency, freq in Units of 62.5 kHz = 1/16MHz + * + * @c: i2c_client descriptor + * @freq: frequency + */ +static void set_tv_freq(struct i2c_client *c, unsigned int freq) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + struct analog_parameters params = { + .mode = t->mode, + .audmode = t->audmode, + .std = t->std + }; + + if (t->type == UNSET) { + tuner_warn("tuner type not set\n"); + return; + } + if (NULL == analog_ops->set_params) { + tuner_warn("Tuner has no way to set tv freq\n"); + return; + } + if (freq < tv_range[0] * 16 || freq > tv_range[1] * 16) { + tuner_dbg("TV freq (%d.%02d) out of range (%d-%d)\n", + freq / 16, freq % 16 * 100 / 16, tv_range[0], + tv_range[1]); + /* V4L2 spec: if the freq is not possible then the closest + possible value should be selected */ + if (freq < tv_range[0] * 16) + freq = tv_range[0] * 16; + else + freq = tv_range[1] * 16; + } + params.frequency = freq; + tuner_dbg("tv freq set to %d.%02d\n", + freq / 16, freq % 16 * 100 / 16); + t->tv_freq = freq; + t->standby = false; + + analog_ops->set_params(&t->fe, ¶ms); +} + +/** + * tuner_fixup_std - force a given video standard variant + * + * @t: tuner internal struct + * @std: TV standard + * + * A few devices or drivers have problem to detect some standard variations. + * On other operational systems, the drivers generally have a per-country + * code, and some logic to apply per-country hacks. V4L2 API doesn't provide + * such hacks. Instead, it relies on a proper video standard selection from + * the userspace application. However, as some apps are buggy, not allowing + * to distinguish all video standard variations, a modprobe parameter can + * be used to force a video standard match. + */ +static v4l2_std_id tuner_fixup_std(struct tuner *t, v4l2_std_id std) +{ + if (pal[0] != '-' && (std & V4L2_STD_PAL) == V4L2_STD_PAL) { + switch (pal[0]) { + case '6': + return V4L2_STD_PAL_60; + case 'b': + case 'B': + case 'g': + case 'G': + return V4L2_STD_PAL_BG; + case 'i': + case 'I': + return V4L2_STD_PAL_I; + case 'd': + case 'D': + case 'k': + case 'K': + return V4L2_STD_PAL_DK; + case 'M': + case 'm': + return V4L2_STD_PAL_M; + case 'N': + case 'n': + if (pal[1] == 'c' || pal[1] == 'C') + return V4L2_STD_PAL_Nc; + return V4L2_STD_PAL_N; + default: + tuner_warn("pal= argument not recognised\n"); + break; + } + } + if (secam[0] != '-' && (std & V4L2_STD_SECAM) == V4L2_STD_SECAM) { + switch (secam[0]) { + case 'b': + case 'B': + case 'g': + case 'G': + case 'h': + case 'H': + return V4L2_STD_SECAM_B | + V4L2_STD_SECAM_G | + V4L2_STD_SECAM_H; + case 'd': + case 'D': + case 'k': + case 'K': + return V4L2_STD_SECAM_DK; + case 'l': + case 'L': + if ((secam[1] == 'C') || (secam[1] == 'c')) + return V4L2_STD_SECAM_LC; + return V4L2_STD_SECAM_L; + default: + tuner_warn("secam= argument not recognised\n"); + break; + } + } + + if (ntsc[0] != '-' && (std & V4L2_STD_NTSC) == V4L2_STD_NTSC) { + switch (ntsc[0]) { + case 'm': + case 'M': + return V4L2_STD_NTSC_M; + case 'j': + case 'J': + return V4L2_STD_NTSC_M_JP; + case 'k': + case 'K': + return V4L2_STD_NTSC_M_KR; + default: + tuner_info("ntsc= argument not recognised\n"); + break; + } + } + return std; +} + +/* + * Functions that are specific for Radio mode + */ + +/** + * set_radio_freq - Set tuner frequency, freq in Units of 62.5 Hz = 1/16kHz + * + * @c: i2c_client descriptor + * @freq: frequency + */ +static void set_radio_freq(struct i2c_client *c, unsigned int freq) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + struct analog_parameters params = { + .mode = t->mode, + .audmode = t->audmode, + .std = t->std + }; + + if (t->type == UNSET) { + tuner_warn("tuner type not set\n"); + return; + } + if (NULL == analog_ops->set_params) { + tuner_warn("tuner has no way to set radio frequency\n"); + return; + } + if (freq < radio_range[0] * 16000 || freq > radio_range[1] * 16000) { + tuner_dbg("radio freq (%d.%02d) out of range (%d-%d)\n", + freq / 16000, freq % 16000 * 100 / 16000, + radio_range[0], radio_range[1]); + /* V4L2 spec: if the freq is not possible then the closest + possible value should be selected */ + if (freq < radio_range[0] * 16000) + freq = radio_range[0] * 16000; + else + freq = radio_range[1] * 16000; + } + params.frequency = freq; + tuner_dbg("radio freq set to %d.%02d\n", + freq / 16000, freq % 16000 * 100 / 16000); + t->radio_freq = freq; + t->standby = false; + + analog_ops->set_params(&t->fe, ¶ms); +} + +/* + * Debug function for reporting tuner status to userspace + */ + +/** + * tuner_status - Dumps the current tuner status at dmesg + * @fe: pointer to struct dvb_frontend + * + * This callback is used only for driver debug purposes, answering to + * VIDIOC_LOG_STATUS. No changes should happen on this call. + */ +static void tuner_status(struct dvb_frontend *fe) +{ + struct tuner *t = fe->analog_demod_priv; + unsigned long freq, freq_fraction; + struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; + struct analog_demod_ops *analog_ops = &fe->ops.analog_ops; + const char *p; + + switch (t->mode) { + case V4L2_TUNER_RADIO: + p = "radio"; + break; + case V4L2_TUNER_DIGITAL_TV: /* Used by mt20xx */ + p = "digital TV"; + break; + case V4L2_TUNER_ANALOG_TV: + default: + p = "analog TV"; + break; + } + if (t->mode == V4L2_TUNER_RADIO) { + freq = t->radio_freq / 16000; + freq_fraction = (t->radio_freq % 16000) * 100 / 16000; + } else { + freq = t->tv_freq / 16; + freq_fraction = (t->tv_freq % 16) * 100 / 16; + } + tuner_info("Tuner mode: %s%s\n", p, + t->standby ? " on standby mode" : ""); + tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction); + tuner_info("Standard: 0x%08lx\n", (unsigned long)t->std); + if (t->mode != V4L2_TUNER_RADIO) + return; + if (fe_tuner_ops->get_status) { + u32 tuner_status; + + fe_tuner_ops->get_status(&t->fe, &tuner_status); + if (tuner_status & TUNER_STATUS_LOCKED) + tuner_info("Tuner is locked.\n"); + if (tuner_status & TUNER_STATUS_STEREO) + tuner_info("Stereo: yes\n"); + } + if (analog_ops->has_signal) + tuner_info("Signal strength: %d\n", + analog_ops->has_signal(fe)); +} + +/* + * Function to splicitly change mode to radio. Probably not needed anymore + */ + +static int tuner_s_radio(struct v4l2_subdev *sd) +{ + struct tuner *t = to_tuner(sd); + + if (set_mode(t, V4L2_TUNER_RADIO) == 0) + set_freq(t, 0); + return 0; +} + +/* + * Tuner callbacks to handle userspace ioctl's + */ + +/** + * tuner_s_power - controls the power state of the tuner + * @sd: pointer to struct v4l2_subdev + * @on: a zero value puts the tuner to sleep, non-zero wakes it up + */ +static int tuner_s_power(struct v4l2_subdev *sd, int on) +{ + struct tuner *t = to_tuner(sd); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + if (on) { + if (t->standby && set_mode(t, t->mode) == 0) { + tuner_dbg("Waking up tuner\n"); + set_freq(t, 0); + } + return 0; + } + + tuner_dbg("Putting tuner to sleep\n"); + t->standby = true; + if (analog_ops->standby) + analog_ops->standby(&t->fe); + return 0; +} + +static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct tuner *t = to_tuner(sd); + + if (set_mode(t, V4L2_TUNER_ANALOG_TV)) + return 0; + + t->std = tuner_fixup_std(t, std); + if (t->std != std) + tuner_dbg("Fixup standard %llx to %llx\n", std, t->std); + set_freq(t, 0); + return 0; +} + +static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) +{ + struct tuner *t = to_tuner(sd); + + if (set_mode(t, f->type) == 0) + set_freq(t, f->frequency); + return 0; +} + +/** + * tuner_g_frequency - Get the tuned frequency for the tuner + * @sd: pointer to struct v4l2_subdev + * @f: pointer to struct v4l2_frequency + * + * At return, the structure f will be filled with tuner frequency + * if the tuner matches the f->type. + * Note: f->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ +static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) +{ + struct tuner *t = to_tuner(sd); + struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; + + if (check_mode(t, f->type) == -EINVAL) + return 0; + if (f->type == t->mode && fe_tuner_ops->get_frequency && !t->standby) { + u32 abs_freq; + + fe_tuner_ops->get_frequency(&t->fe, &abs_freq); + f->frequency = (V4L2_TUNER_RADIO == t->mode) ? + DIV_ROUND_CLOSEST(abs_freq * 2, 125) : + DIV_ROUND_CLOSEST(abs_freq, 62500); + } else { + f->frequency = (V4L2_TUNER_RADIO == f->type) ? + t->radio_freq : t->tv_freq; + } + return 0; +} + +/** + * tuner_g_tuner - Fill in tuner information + * @sd: pointer to struct v4l2_subdev + * @vt: pointer to struct v4l2_tuner + * + * At return, the structure vt will be filled with tuner information + * if the tuner matches vt->type. + * Note: vt->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ +static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct tuner *t = to_tuner(sd); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; + + if (check_mode(t, vt->type) == -EINVAL) + return 0; + if (vt->type == t->mode && analog_ops->get_afc) + vt->afc = analog_ops->get_afc(&t->fe); + if (analog_ops->has_signal) + vt->signal = analog_ops->has_signal(&t->fe); + if (vt->type != V4L2_TUNER_RADIO) { + vt->capability |= V4L2_TUNER_CAP_NORM; + vt->rangelow = tv_range[0] * 16; + vt->rangehigh = tv_range[1] * 16; + return 0; + } + + /* radio mode */ + if (vt->type == t->mode) { + vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + if (fe_tuner_ops->get_status) { + u32 tuner_status; + + fe_tuner_ops->get_status(&t->fe, &tuner_status); + vt->rxsubchans = + (tuner_status & TUNER_STATUS_STEREO) ? + V4L2_TUNER_SUB_STEREO : + V4L2_TUNER_SUB_MONO; + } + vt->audmode = t->audmode; + } + vt->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + vt->rangelow = radio_range[0] * 16000; + vt->rangehigh = radio_range[1] * 16000; + + return 0; +} + +/** + * tuner_s_tuner - Set the tuner's audio mode + * @sd: pointer to struct v4l2_subdev + * @vt: pointer to struct v4l2_tuner + * + * Sets the audio mode if the tuner matches vt->type. + * Note: vt->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ +static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct tuner *t = to_tuner(sd); + + if (set_mode(t, vt->type)) + return 0; + + if (t->mode == V4L2_TUNER_RADIO) + t->audmode = vt->audmode; + set_freq(t, 0); + + return 0; +} + +static int tuner_log_status(struct v4l2_subdev *sd) +{ + struct tuner *t = to_tuner(sd); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + if (analog_ops->tuner_status) + analog_ops->tuner_status(&t->fe); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tuner_suspend(struct device *dev) +{ + struct i2c_client *c = to_i2c_client(dev); + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + tuner_dbg("suspend\n"); + + if (!t->standby && analog_ops->standby) + analog_ops->standby(&t->fe); + + return 0; +} + +static int tuner_resume(struct device *dev) +{ + struct i2c_client *c = to_i2c_client(dev); + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + + tuner_dbg("resume\n"); + + if (!t->standby) + if (set_mode(t, t->mode) == 0) + set_freq(t, 0); + + return 0; +} +#endif + +static int tuner_command(struct i2c_client *client, unsigned cmd, void *arg) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + /* TUNER_SET_CONFIG is still called by tuner-simple.c, so we have + to handle it here. + There must be a better way of doing this... */ + switch (cmd) { + case TUNER_SET_CONFIG: + return tuner_s_config(sd, arg); + } + return -ENOIOCTLCMD; +} + +/* + * Callback structs + */ + +static const struct v4l2_subdev_core_ops tuner_core_ops = { + .log_status = tuner_log_status, + .s_std = tuner_s_std, + .s_power = tuner_s_power, +}; + +static const struct v4l2_subdev_tuner_ops tuner_tuner_ops = { + .s_radio = tuner_s_radio, + .g_tuner = tuner_g_tuner, + .s_tuner = tuner_s_tuner, + .s_frequency = tuner_s_frequency, + .g_frequency = tuner_g_frequency, + .s_type_addr = tuner_s_type_addr, + .s_config = tuner_s_config, +}; + +static const struct v4l2_subdev_ops tuner_ops = { + .core = &tuner_core_ops, + .tuner = &tuner_tuner_ops, +}; + +/* + * I2C structs and module init functions + */ + +static const struct dev_pm_ops tuner_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tuner_suspend, tuner_resume) +}; + +static const struct i2c_device_id tuner_id[] = { + { "tuner", }, /* autodetect */ + { } +}; +MODULE_DEVICE_TABLE(i2c, tuner_id); + +static struct i2c_driver tuner_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tuner", + .pm = &tuner_pm_ops, + }, + .probe = tuner_probe, + .remove = tuner_remove, + .command = tuner_command, + .id_table = tuner_id, +}; + +module_i2c_driver(tuner_driver); + +MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); +MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); +MODULE_LICENSE("GPL"); |