diff options
Diffstat (limited to 'drivers/media/usb/cx231xx/cx231xx-avcore.c')
| -rw-r--r-- | drivers/media/usb/cx231xx/cx231xx-avcore.c | 3087 |
1 files changed, 3087 insertions, 0 deletions
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c new file mode 100644 index 00000000000..447148eff95 --- /dev/null +++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c @@ -0,0 +1,3087 @@ +/* + cx231xx_avcore.c - driver for Conexant Cx23100/101/102 + USB video capture devices + + Copyright (C) 2008 <srinivasa.deevi at conexant dot com> + + This program contains the specific code to control the avdecoder chip and + other related usb control functions for cx231xx based chipset. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/bitmap.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/mm.h> +#include <linux/mutex.h> +#include <media/tuner.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-chip-ident.h> + +#include "cx231xx.h" +#include "cx231xx-dif.h" + +#define TUNER_MODE_FM_RADIO 0 +/****************************************************************************** + -: BLOCK ARRANGEMENT :- + I2S block ----------------------| + [I2S audio] | + | + Analog Front End --> Direct IF -|-> Cx25840 --> Audio + [video & audio] | [Audio] + | + |-> Cx25840 --> Video + [Video] + +*******************************************************************************/ +/****************************************************************************** + * VERVE REGISTER * + * * + ******************************************************************************/ +static int verve_write_byte(struct cx231xx *dev, u8 saddr, u8 data) +{ + return cx231xx_write_i2c_data(dev, VERVE_I2C_ADDRESS, + saddr, 1, data, 1); +} + +static int verve_read_byte(struct cx231xx *dev, u8 saddr, u8 *data) +{ + int status; + u32 temp = 0; + + status = cx231xx_read_i2c_data(dev, VERVE_I2C_ADDRESS, + saddr, 1, &temp, 1); + *data = (u8) temp; + return status; +} +void initGPIO(struct cx231xx *dev) +{ + u32 _gpio_direction = 0; + u32 value = 0; + u8 val = 0; + + _gpio_direction = _gpio_direction & 0xFC0003FF; + _gpio_direction = _gpio_direction | 0x03FDFC00; + cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0); + + verve_read_byte(dev, 0x07, &val); + cx231xx_info(" verve_read_byte address0x07=0x%x\n", val); + verve_write_byte(dev, 0x07, 0xF4); + verve_read_byte(dev, 0x07, &val); + cx231xx_info(" verve_read_byte address0x07=0x%x\n", val); + + cx231xx_capture_start(dev, 1, Vbi); + + cx231xx_mode_register(dev, EP_MODE_SET, 0x0500FE00); + cx231xx_mode_register(dev, GBULK_BIT_EN, 0xFFFDFFFF); + +} +void uninitGPIO(struct cx231xx *dev) +{ + u8 value[4] = { 0, 0, 0, 0 }; + + cx231xx_capture_start(dev, 0, Vbi); + verve_write_byte(dev, 0x07, 0x14); + cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + 0x68, value, 4); +} + +/****************************************************************************** + * A F E - B L O C K C O N T R O L functions * + * [ANALOG FRONT END] * + ******************************************************************************/ +static int afe_write_byte(struct cx231xx *dev, u16 saddr, u8 data) +{ + return cx231xx_write_i2c_data(dev, AFE_DEVICE_ADDRESS, + saddr, 2, data, 1); +} + +static int afe_read_byte(struct cx231xx *dev, u16 saddr, u8 *data) +{ + int status; + u32 temp = 0; + + status = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS, + saddr, 2, &temp, 1); + *data = (u8) temp; + return status; +} + +int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count) +{ + int status = 0; + u8 temp = 0; + u8 afe_power_status = 0; + int i = 0; + + /* super block initialize */ + temp = (u8) (ref_count & 0xff); + status = afe_write_byte(dev, SUP_BLK_TUNE2, temp); + if (status < 0) + return status; + + status = afe_read_byte(dev, SUP_BLK_TUNE2, &afe_power_status); + if (status < 0) + return status; + + temp = (u8) ((ref_count & 0x300) >> 8); + temp |= 0x40; + status = afe_write_byte(dev, SUP_BLK_TUNE1, temp); + if (status < 0) + return status; + + status = afe_write_byte(dev, SUP_BLK_PLL2, 0x0f); + if (status < 0) + return status; + + /* enable pll */ + while (afe_power_status != 0x18) { + status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18); + if (status < 0) { + cx231xx_info( + ": Init Super Block failed in send cmd\n"); + break; + } + + status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status); + afe_power_status &= 0xff; + if (status < 0) { + cx231xx_info( + ": Init Super Block failed in receive cmd\n"); + break; + } + i++; + if (i == 10) { + cx231xx_info( + ": Init Super Block force break in loop !!!!\n"); + status = -1; + break; + } + } + + if (status < 0) + return status; + + /* start tuning filter */ + status = afe_write_byte(dev, SUP_BLK_TUNE3, 0x40); + if (status < 0) + return status; + + msleep(5); + + /* exit tuning */ + status = afe_write_byte(dev, SUP_BLK_TUNE3, 0x00); + + return status; +} + +int cx231xx_afe_init_channels(struct cx231xx *dev) +{ + int status = 0; + + /* power up all 3 channels, clear pd_buffer */ + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 0x00); + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 0x00); + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 0x00); + + /* Enable quantizer calibration */ + status = afe_write_byte(dev, ADC_COM_QUANT, 0x02); + + /* channel initialize, force modulator (fb) reset */ + status = afe_write_byte(dev, ADC_FB_FRCRST_CH1, 0x17); + status = afe_write_byte(dev, ADC_FB_FRCRST_CH2, 0x17); + status = afe_write_byte(dev, ADC_FB_FRCRST_CH3, 0x17); + + /* start quantilizer calibration */ + status = afe_write_byte(dev, ADC_CAL_ATEST_CH1, 0x10); + status = afe_write_byte(dev, ADC_CAL_ATEST_CH2, 0x10); + status = afe_write_byte(dev, ADC_CAL_ATEST_CH3, 0x10); + msleep(5); + + /* exit modulator (fb) reset */ + status = afe_write_byte(dev, ADC_FB_FRCRST_CH1, 0x07); + status = afe_write_byte(dev, ADC_FB_FRCRST_CH2, 0x07); + status = afe_write_byte(dev, ADC_FB_FRCRST_CH3, 0x07); + + /* enable the pre_clamp in each channel for single-ended input */ + status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH1, 0xf0); + status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH2, 0xf0); + status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH3, 0xf0); + + /* use diode instead of resistor, so set term_en to 0, res_en to 0 */ + status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8, + ADC_QGAIN_RES_TRM_CH1, 3, 7, 0x00); + status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8, + ADC_QGAIN_RES_TRM_CH2, 3, 7, 0x00); + status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8, + ADC_QGAIN_RES_TRM_CH3, 3, 7, 0x00); + + /* dynamic element matching off */ + status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH1, 0x03); + status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH2, 0x03); + status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH3, 0x03); + + return status; +} + +int cx231xx_afe_setup_AFE_for_baseband(struct cx231xx *dev) +{ + u8 c_value = 0; + int status = 0; + + status = afe_read_byte(dev, ADC_PWRDN_CLAMP_CH2, &c_value); + c_value &= (~(0x50)); + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, c_value); + + return status; +} + +/* + The Analog Front End in Cx231xx has 3 channels. These + channels are used to share between different inputs + like tuner, s-video and composite inputs. + + channel 1 ----- pin 1 to pin4(in reg is 1-4) + channel 2 ----- pin 5 to pin8(in reg is 5-8) + channel 3 ----- pin 9 to pin 12(in reg is 9-11) +*/ +int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux) +{ + u8 ch1_setting = (u8) input_mux; + u8 ch2_setting = (u8) (input_mux >> 8); + u8 ch3_setting = (u8) (input_mux >> 16); + int status = 0; + u8 value = 0; + + if (ch1_setting != 0) { + status = afe_read_byte(dev, ADC_INPUT_CH1, &value); + value &= ~INPUT_SEL_MASK; + value |= (ch1_setting - 1) << 4; + value &= 0xff; + status = afe_write_byte(dev, ADC_INPUT_CH1, value); + } + + if (ch2_setting != 0) { + status = afe_read_byte(dev, ADC_INPUT_CH2, &value); + value &= ~INPUT_SEL_MASK; + value |= (ch2_setting - 1) << 4; + value &= 0xff; + status = afe_write_byte(dev, ADC_INPUT_CH2, value); + } + + /* For ch3_setting, the value to put in the register is + 7 less than the input number */ + if (ch3_setting != 0) { + status = afe_read_byte(dev, ADC_INPUT_CH3, &value); + value &= ~INPUT_SEL_MASK; + value |= (ch3_setting - 1) << 4; + value &= 0xff; + status = afe_write_byte(dev, ADC_INPUT_CH3, value); + } + + return status; +} + +int cx231xx_afe_set_mode(struct cx231xx *dev, enum AFE_MODE mode) +{ + int status = 0; + + /* + * FIXME: We need to implement the AFE code for LOW IF and for HI IF. + * Currently, only baseband works. + */ + + switch (mode) { + case AFE_MODE_LOW_IF: + cx231xx_Setup_AFE_for_LowIF(dev); + break; + case AFE_MODE_BASEBAND: + status = cx231xx_afe_setup_AFE_for_baseband(dev); + break; + case AFE_MODE_EU_HI_IF: + /* SetupAFEforEuHiIF(); */ + break; + case AFE_MODE_US_HI_IF: + /* SetupAFEforUsHiIF(); */ + break; + case AFE_MODE_JAPAN_HI_IF: + /* SetupAFEforJapanHiIF(); */ + break; + } + + if ((mode != dev->afe_mode) && + (dev->video_input == CX231XX_VMUX_TELEVISION)) + status = cx231xx_afe_adjust_ref_count(dev, + CX231XX_VMUX_TELEVISION); + + dev->afe_mode = mode; + + return status; +} + +int cx231xx_afe_update_power_control(struct cx231xx *dev, + enum AV_MODE avmode) +{ + u8 afe_power_status = 0; + int status = 0; + + switch (dev->model) { + case CX231XX_BOARD_CNXT_CARRAERA: + case CX231XX_BOARD_CNXT_RDE_250: + case CX231XX_BOARD_CNXT_SHELBY: + case CX231XX_BOARD_CNXT_RDU_250: + case CX231XX_BOARD_CNXT_RDE_253S: + case CX231XX_BOARD_CNXT_RDU_253S: + case CX231XX_BOARD_CNXT_VIDEO_GRABBER: + case CX231XX_BOARD_HAUPPAUGE_EXETER: + case CX231XX_BOARD_HAUPPAUGE_USBLIVE2: + case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: + if (avmode == POLARIS_AVMODE_ANALOGT_TV) { + while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL)) { + status = afe_write_byte(dev, SUP_BLK_PWRDN, + FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL); + status |= afe_read_byte(dev, SUP_BLK_PWRDN, + &afe_power_status); + if (status < 0) + break; + } + + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, + 0x00); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, + 0x00); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, + 0x00); + } else if (avmode == POLARIS_AVMODE_DIGITAL) { + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, + 0x70); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, + 0x70); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, + 0x70); + + status |= afe_read_byte(dev, SUP_BLK_PWRDN, + &afe_power_status); + afe_power_status |= FLD_PWRDN_PD_BANDGAP | + FLD_PWRDN_PD_BIAS | + FLD_PWRDN_PD_TUNECK; + status |= afe_write_byte(dev, SUP_BLK_PWRDN, + afe_power_status); + } else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) { + while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL)) { + status = afe_write_byte(dev, SUP_BLK_PWRDN, + FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL); + status |= afe_read_byte(dev, SUP_BLK_PWRDN, + &afe_power_status); + if (status < 0) + break; + } + + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, + 0x00); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, + 0x00); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, + 0x00); + } else { + cx231xx_info("Invalid AV mode input\n"); + status = -1; + } + break; + default: + if (avmode == POLARIS_AVMODE_ANALOGT_TV) { + while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL)) { + status = afe_write_byte(dev, SUP_BLK_PWRDN, + FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL); + status |= afe_read_byte(dev, SUP_BLK_PWRDN, + &afe_power_status); + if (status < 0) + break; + } + + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, + 0x40); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, + 0x40); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, + 0x00); + } else if (avmode == POLARIS_AVMODE_DIGITAL) { + status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, + 0x70); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, + 0x70); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, + 0x70); + + status |= afe_read_byte(dev, SUP_BLK_PWRDN, + &afe_power_status); + afe_power_status |= FLD_PWRDN_PD_BANDGAP | + FLD_PWRDN_PD_BIAS | + FLD_PWRDN_PD_TUNECK; + status |= afe_write_byte(dev, SUP_BLK_PWRDN, + afe_power_status); + } else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) { + while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL)) { + status = afe_write_byte(dev, SUP_BLK_PWRDN, + FLD_PWRDN_TUNING_BIAS | + FLD_PWRDN_ENABLE_PLL); + status |= afe_read_byte(dev, SUP_BLK_PWRDN, + &afe_power_status); + if (status < 0) + break; + } + + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, + 0x00); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, + 0x00); + status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, + 0x40); + } else { + cx231xx_info("Invalid AV mode input\n"); + status = -1; + } + } /* switch */ + + return status; +} + +int cx231xx_afe_adjust_ref_count(struct cx231xx *dev, u32 video_input) +{ + u8 input_mode = 0; + u8 ntf_mode = 0; + int status = 0; + + dev->video_input = video_input; + + if (video_input == CX231XX_VMUX_TELEVISION) { + status = afe_read_byte(dev, ADC_INPUT_CH3, &input_mode); + status = afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH3, + &ntf_mode); + } else { + status = afe_read_byte(dev, ADC_INPUT_CH1, &input_mode); + status = afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH1, + &ntf_mode); + } + + input_mode = (ntf_mode & 0x3) | ((input_mode & 0x6) << 1); + + switch (input_mode) { + case SINGLE_ENDED: + dev->afe_ref_count = 0x23C; + break; + case LOW_IF: + dev->afe_ref_count = 0x24C; + break; + case EU_IF: + dev->afe_ref_count = 0x258; + break; + case US_IF: + dev->afe_ref_count = 0x260; + break; + default: + break; + } + + status = cx231xx_afe_init_super_block(dev, dev->afe_ref_count); + + return status; +} + +/****************************************************************************** + * V I D E O / A U D I O D E C O D E R C O N T R O L functions * + ******************************************************************************/ +static int vid_blk_write_byte(struct cx231xx *dev, u16 saddr, u8 data) +{ + return cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS, + saddr, 2, data, 1); +} + +static int vid_blk_read_byte(struct cx231xx *dev, u16 saddr, u8 *data) +{ + int status; + u32 temp = 0; + + status = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS, + saddr, 2, &temp, 1); + *data = (u8) temp; + return status; +} + +static int vid_blk_write_word(struct cx231xx *dev, u16 saddr, u32 data) +{ + return cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS, + saddr, 2, data, 4); +} + +static int vid_blk_read_word(struct cx231xx *dev, u16 saddr, u32 *data) +{ + return cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS, + saddr, 2, data, 4); +} +int cx231xx_check_fw(struct cx231xx *dev) +{ + u8 temp = 0; + int status = 0; + status = vid_blk_read_byte(dev, DL_CTL_ADDRESS_LOW, &temp); + if (status < 0) + return status; + else + return temp; + +} + +int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input) +{ + int status = 0; + + switch (INPUT(input)->type) { + case CX231XX_VMUX_COMPOSITE1: + case CX231XX_VMUX_SVIDEO: + if ((dev->current_pcb_config.type == USB_BUS_POWER) && + (dev->power_mode != POLARIS_AVMODE_ENXTERNAL_AV)) { + /* External AV */ + status = cx231xx_set_power_mode(dev, + POLARIS_AVMODE_ENXTERNAL_AV); + if (status < 0) { + cx231xx_errdev("%s: set_power_mode : Failed to" + " set Power - errCode [%d]!\n", + __func__, status); + return status; + } + } + status = cx231xx_set_decoder_video_input(dev, + INPUT(input)->type, + INPUT(input)->vmux); + break; + case CX231XX_VMUX_TELEVISION: + case CX231XX_VMUX_CABLE: + if ((dev->current_pcb_config.type == USB_BUS_POWER) && + (dev->power_mode != POLARIS_AVMODE_ANALOGT_TV)) { + /* Tuner */ + status = cx231xx_set_power_mode(dev, + POLARIS_AVMODE_ANALOGT_TV); + if (status < 0) { + cx231xx_errdev("%s: set_power_mode:Failed" + " to set Power - errCode [%d]!\n", + __func__, status); + return status; + } + } + if (dev->tuner_type == TUNER_NXP_TDA18271) + status = cx231xx_set_decoder_video_input(dev, + CX231XX_VMUX_TELEVISION, + INPUT(input)->vmux); + else + status = cx231xx_set_decoder_video_input(dev, + CX231XX_VMUX_COMPOSITE1, + INPUT(input)->vmux); + + break; + default: + cx231xx_errdev("%s: set_power_mode : Unknown Input %d !\n", + __func__, INPUT(input)->type); + break; + } + + /* save the selection */ + dev->video_input = input; + + return status; +} + +int cx231xx_set_decoder_video_input(struct cx231xx *dev, + u8 pin_type, u8 input) +{ + int status = 0; + u32 value = 0; + + if (pin_type != dev->video_input) { + status = cx231xx_afe_adjust_ref_count(dev, pin_type); + if (status < 0) { + cx231xx_errdev("%s: adjust_ref_count :Failed to set" + "AFE input mux - errCode [%d]!\n", + __func__, status); + return status; + } + } + + /* call afe block to set video inputs */ + status = cx231xx_afe_set_input_mux(dev, input); + if (status < 0) { + cx231xx_errdev("%s: set_input_mux :Failed to set" + " AFE input mux - errCode [%d]!\n", + __func__, status); + return status; + } + + switch (pin_type) { + case CX231XX_VMUX_COMPOSITE1: + status = vid_blk_read_word(dev, AFE_CTRL, &value); + value |= (0 << 13) | (1 << 4); + value &= ~(1 << 5); + + /* set [24:23] [22:15] to 0 */ + value &= (~(0x1ff8000)); + /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */ + value |= 0x1000000; + status = vid_blk_write_word(dev, AFE_CTRL, value); + + status = vid_blk_read_word(dev, OUT_CTRL1, &value); + value |= (1 << 7); + status = vid_blk_write_word(dev, OUT_CTRL1, value); + + /* Set output mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + OUT_CTRL1, + FLD_OUT_MODE, + dev->board.output_mode); + + /* Tell DIF object to go to baseband mode */ + status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND); + if (status < 0) { + cx231xx_errdev("%s: cx231xx_dif set to By pass" + " mode- errCode [%d]!\n", + __func__, status); + return status; + } + + /* Read the DFE_CTRL1 register */ + status = vid_blk_read_word(dev, DFE_CTRL1, &value); + + /* enable the VBI_GATE_EN */ + value |= FLD_VBI_GATE_EN; + + /* Enable the auto-VGA enable */ + value |= FLD_VGA_AUTO_EN; + + /* Write it back */ + status = vid_blk_write_word(dev, DFE_CTRL1, value); + + /* Disable auto config of registers */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_ACFG_DIS, + cx231xx_set_field(FLD_ACFG_DIS, 1)); + + /* Set CVBS input mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_INPUT_MODE, + cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0)); + break; + case CX231XX_VMUX_SVIDEO: + /* Disable the use of DIF */ + + status = vid_blk_read_word(dev, AFE_CTRL, &value); + + /* set [24:23] [22:15] to 0 */ + value &= (~(0x1ff8000)); + /* set FUNC_MODE[24:23] = 2 + IF_MOD[22:15] = 0 DCR_BYP_CH2[4:4] = 1; */ + value |= 0x1000010; + status = vid_blk_write_word(dev, AFE_CTRL, value); + + /* Tell DIF object to go to baseband mode */ + status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND); + if (status < 0) { + cx231xx_errdev("%s: cx231xx_dif set to By pass" + " mode- errCode [%d]!\n", + __func__, status); + return status; + } + + /* Read the DFE_CTRL1 register */ + status = vid_blk_read_word(dev, DFE_CTRL1, &value); + + /* enable the VBI_GATE_EN */ + value |= FLD_VBI_GATE_EN; + + /* Enable the auto-VGA enable */ + value |= FLD_VGA_AUTO_EN; + + /* Write it back */ + status = vid_blk_write_word(dev, DFE_CTRL1, value); + + /* Disable auto config of registers */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_ACFG_DIS, + cx231xx_set_field(FLD_ACFG_DIS, 1)); + + /* Set YC input mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, + FLD_INPUT_MODE, + cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_YC_1)); + + /* Chroma to ADC2 */ + status = vid_blk_read_word(dev, AFE_CTRL, &value); + value |= FLD_CHROMA_IN_SEL; /* set the chroma in select */ + + /* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8) + This sets them to use video + rather than audio. Only one of the two will be in use. */ + value &= ~(FLD_VGA_SEL_CH2 | FLD_VGA_SEL_CH3); + + status = vid_blk_write_word(dev, AFE_CTRL, value); + + status = cx231xx_afe_set_mode(dev, AFE_MODE_BASEBAND); + break; + case CX231XX_VMUX_TELEVISION: + case CX231XX_VMUX_CABLE: + default: + /* TODO: Test if this is also needed for xc2028/xc3028 */ + if (dev->board.tuner_type == TUNER_XC5000) { + /* Disable the use of DIF */ + + status = vid_blk_read_word(dev, AFE_CTRL, &value); + value |= (0 << 13) | (1 << 4); + value &= ~(1 << 5); + + /* set [24:23] [22:15] to 0 */ + value &= (~(0x1FF8000)); + /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */ + value |= 0x1000000; + status = vid_blk_write_word(dev, AFE_CTRL, value); + + status = vid_blk_read_word(dev, OUT_CTRL1, &value); + value |= (1 << 7); + status = vid_blk_write_word(dev, OUT_CTRL1, value); + + /* Set output mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + OUT_CTRL1, FLD_OUT_MODE, + dev->board.output_mode); + + /* Tell DIF object to go to baseband mode */ + status = cx231xx_dif_set_standard(dev, + DIF_USE_BASEBAND); + if (status < 0) { + cx231xx_errdev("%s: cx231xx_dif set to By pass" + " mode- errCode [%d]!\n", + __func__, status); + return status; + } + + /* Read the DFE_CTRL1 register */ + status = vid_blk_read_word(dev, DFE_CTRL1, &value); + + /* enable the VBI_GATE_EN */ + value |= FLD_VBI_GATE_EN; + + /* Enable the auto-VGA enable */ + value |= FLD_VGA_AUTO_EN; + + /* Write it back */ + status = vid_blk_write_word(dev, DFE_CTRL1, value); + + /* Disable auto config of registers */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_ACFG_DIS, + cx231xx_set_field(FLD_ACFG_DIS, 1)); + + /* Set CVBS input mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_INPUT_MODE, + cx231xx_set_field(FLD_INPUT_MODE, + INPUT_MODE_CVBS_0)); + } else { + /* Enable the DIF for the tuner */ + + /* Reinitialize the DIF */ + status = cx231xx_dif_set_standard(dev, dev->norm); + if (status < 0) { + cx231xx_errdev("%s: cx231xx_dif set to By pass" + " mode- errCode [%d]!\n", + __func__, status); + return status; + } + + /* Make sure bypass is cleared */ + status = vid_blk_read_word(dev, DIF_MISC_CTRL, &value); + + /* Clear the bypass bit */ + value &= ~FLD_DIF_DIF_BYPASS; + + /* Enable the use of the DIF block */ + status = vid_blk_write_word(dev, DIF_MISC_CTRL, value); + + /* Read the DFE_CTRL1 register */ + status = vid_blk_read_word(dev, DFE_CTRL1, &value); + + /* Disable the VBI_GATE_EN */ + value &= ~FLD_VBI_GATE_EN; + + /* Enable the auto-VGA enable, AGC, and + set the skip count to 2 */ + value |= FLD_VGA_AUTO_EN | FLD_AGC_AUTO_EN | 0x00200000; + + /* Write it back */ + status = vid_blk_write_word(dev, DFE_CTRL1, value); + + /* Wait until AGC locks up */ + msleep(1); + + /* Disable the auto-VGA enable AGC */ + value &= ~(FLD_VGA_AUTO_EN); + + /* Write it back */ + status = vid_blk_write_word(dev, DFE_CTRL1, value); + + /* Enable Polaris B0 AGC output */ + status = vid_blk_read_word(dev, PIN_CTRL, &value); + value |= (FLD_OEF_AGC_RF) | + (FLD_OEF_AGC_IFVGA) | + (FLD_OEF_AGC_IF); + status = vid_blk_write_word(dev, PIN_CTRL, value); + + /* Set output mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + OUT_CTRL1, FLD_OUT_MODE, + dev->board.output_mode); + + /* Disable auto config of registers */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_ACFG_DIS, + cx231xx_set_field(FLD_ACFG_DIS, 1)); + + /* Set CVBS input mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + MODE_CTRL, FLD_INPUT_MODE, + cx231xx_set_field(FLD_INPUT_MODE, + INPUT_MODE_CVBS_0)); + + /* Set some bits in AFE_CTRL so that channel 2 or 3 + * is ready to receive audio */ + /* Clear clamp for channels 2 and 3 (bit 16-17) */ + /* Clear droop comp (bit 19-20) */ + /* Set VGA_SEL (for audio control) (bit 7-8) */ + status = vid_blk_read_word(dev, AFE_CTRL, &value); + + /*Set Func mode:01-DIF 10-baseband 11-YUV*/ + value &= (~(FLD_FUNC_MODE)); + value |= 0x800000; + + value |= FLD_VGA_SEL_CH3 | FLD_VGA_SEL_CH2; + + status = vid_blk_write_word(dev, AFE_CTRL, value); + + if (dev->tuner_type == TUNER_NXP_TDA18271) { + status = vid_blk_read_word(dev, PIN_CTRL, + &value); + status = vid_blk_write_word(dev, PIN_CTRL, + (value & 0xFFFFFFEF)); + } + + break; + + } + break; + } + + /* Set raw VBI mode */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + OUT_CTRL1, FLD_VBIHACTRAW_EN, + cx231xx_set_field(FLD_VBIHACTRAW_EN, 1)); + + status = vid_blk_read_word(dev, OUT_CTRL1, &value); + if (value & 0x02) { + value |= (1 << 19); + status = vid_blk_write_word(dev, OUT_CTRL1, value); + } + + return status; +} + +void cx231xx_enable656(struct cx231xx *dev) +{ + u8 temp = 0; + /*enable TS1 data[0:7] as output to export 656*/ + + vid_blk_write_byte(dev, TS1_PIN_CTL0, 0xFF); + + /*enable TS1 clock as output to export 656*/ + + vid_blk_read_byte(dev, TS1_PIN_CTL1, &temp); + temp = temp|0x04; + + vid_blk_write_byte(dev, TS1_PIN_CTL1, temp); +} +EXPORT_SYMBOL_GPL(cx231xx_enable656); + +void cx231xx_disable656(struct cx231xx *dev) +{ + u8 temp = 0; + + vid_blk_write_byte(dev, TS1_PIN_CTL0, 0x00); + + vid_blk_read_byte(dev, TS1_PIN_CTL1, &temp); + temp = temp&0xFB; + + vid_blk_write_byte(dev, TS1_PIN_CTL1, temp); +} +EXPORT_SYMBOL_GPL(cx231xx_disable656); + +/* + * Handle any video-mode specific overrides that are different + * on a per video standards basis after touching the MODE_CTRL + * register which resets many values for autodetect + */ +int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev) +{ + int status = 0; + + cx231xx_info("do_mode_ctrl_overrides : 0x%x\n", + (unsigned int)dev->norm); + + /* Change the DFE_CTRL3 bp_percent to fix flagging */ + status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280); + + if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) { + cx231xx_info("do_mode_ctrl_overrides NTSC\n"); + + /* Move the close caption lines out of active video, + adjust the active video start point */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_VBLANK_CNT, 0x18); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_VACTIVE_CNT, + 0x1E7000); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_V656BLANK_CNT, + 0x1C000000); + + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + HORIZ_TIM_CTRL, + FLD_HBLANK_CNT, + cx231xx_set_field + (FLD_HBLANK_CNT, 0x79)); + + } else if (dev->norm & V4L2_STD_SECAM) { + cx231xx_info("do_mode_ctrl_overrides SECAM\n"); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_VBLANK_CNT, 0x20); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_VACTIVE_CNT, + cx231xx_set_field + (FLD_VACTIVE_CNT, + 0x244)); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_V656BLANK_CNT, + cx231xx_set_field + (FLD_V656BLANK_CNT, + 0x24)); + /* Adjust the active video horizontal start point */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + HORIZ_TIM_CTRL, + FLD_HBLANK_CNT, + cx231xx_set_field + (FLD_HBLANK_CNT, 0x85)); + } else { + cx231xx_info("do_mode_ctrl_overrides PAL\n"); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_VBLANK_CNT, 0x20); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_VACTIVE_CNT, + cx231xx_set_field + (FLD_VACTIVE_CNT, + 0x244)); + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + VERT_TIM_CTRL, + FLD_V656BLANK_CNT, + cx231xx_set_field + (FLD_V656BLANK_CNT, + 0x24)); + /* Adjust the active video horizontal start point */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + HORIZ_TIM_CTRL, + FLD_HBLANK_CNT, + cx231xx_set_field + (FLD_HBLANK_CNT, 0x85)); + + } + + return status; +} + +int cx231xx_unmute_audio(struct cx231xx *dev) +{ + return vid_blk_write_byte(dev, PATH1_VOL_CTL, 0x24); +} +EXPORT_SYMBOL_GPL(cx231xx_unmute_audio); + +int stopAudioFirmware(struct cx231xx *dev) +{ + return vid_blk_write_byte(dev, DL_CTL_CONTROL, 0x03); +} + +int restartAudioFirmware(struct cx231xx *dev) +{ + return vid_blk_write_byte(dev, DL_CTL_CONTROL, 0x13); +} + +int cx231xx_set_audio_input(struct cx231xx *dev, u8 input) +{ + int status = 0; + enum AUDIO_INPUT ainput = AUDIO_INPUT_LINE; + + switch (INPUT(input)->amux) { + case CX231XX_AMUX_VIDEO: + ainput = AUDIO_INPUT_TUNER_TV; + break; + case CX231XX_AMUX_LINE_IN: + status = cx231xx_i2s_blk_set_audio_input(dev, input); + ainput = AUDIO_INPUT_LINE; + break; + default: + break; + } + + status = cx231xx_set_audio_decoder_input(dev, ainput); + + return status; +} + +int cx231xx_set_audio_decoder_input(struct cx231xx *dev, + enum AUDIO_INPUT audio_input) +{ + u32 dwval; + int status; + u8 gen_ctrl; + u32 value = 0; + + /* Put it in soft reset */ + status = vid_blk_read_byte(dev, GENERAL_CTL, &gen_ctrl); + gen_ctrl |= 1; + status = vid_blk_write_byte(dev, GENERAL_CTL, gen_ctrl); + + switch (audio_input) { + case AUDIO_INPUT_LINE: + /* setup AUD_IO control from Merlin paralle output */ + value = cx231xx_set_field(FLD_AUD_CHAN1_SRC, + AUD_CHAN_SRC_PARALLEL); + status = vid_blk_write_word(dev, AUD_IO_CTRL, value); + + /* setup input to Merlin, SRC2 connect to AC97 + bypass upsample-by-2, slave mode, sony mode, left justify + adr 091c, dat 01000000 */ + status = vid_blk_read_word(dev, AC97_CTL, &dwval); + + status = vid_blk_write_word(dev, AC97_CTL, + (dwval | FLD_AC97_UP2X_BYPASS)); + + /* select the parallel1 and SRC3 */ + status = vid_blk_write_word(dev, BAND_OUT_SEL, + cx231xx_set_field(FLD_SRC3_IN_SEL, 0x0) | + cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x0) | + cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x0)); + + /* unmute all, AC97 in, independence mode + adr 08d0, data 0x00063073 */ + status = vid_blk_write_word(dev, DL_CTL, 0x3000001); + status = vid_blk_write_word(dev, PATH1_CTL1, 0x00063073); + + /* set AVC maximum threshold, adr 08d4, dat ffff0024 */ + status = vid_blk_read_word(dev, PATH1_VOL_CTL, &dwval); + status = vid_blk_write_word(dev, PATH1_VOL_CTL, + (dwval | FLD_PATH1_AVC_THRESHOLD)); + + /* set SC maximum threshold, adr 08ec, dat ffffb3a3 */ + status = vid_blk_read_word(dev, PATH1_SC_CTL, &dwval); + status = vid_blk_write_word(dev, PATH1_SC_CTL, + (dwval | FLD_PATH1_SC_THRESHOLD)); + break; + + case AUDIO_INPUT_TUNER_TV: + default: + status = stopAudioFirmware(dev); + /* Setup SRC sources and clocks */ + status = vid_blk_write_word(dev, BAND_OUT_SEL, + cx231xx_set_field(FLD_SRC6_IN_SEL, 0x00) | + cx231xx_set_field(FLD_SRC6_CLK_SEL, 0x01) | + cx231xx_set_field(FLD_SRC5_IN_SEL, 0x00) | + cx231xx_set_field(FLD_SRC5_CLK_SEL, 0x02) | + cx231xx_set_field(FLD_SRC4_IN_SEL, 0x02) | + cx231xx_set_field(FLD_SRC4_CLK_SEL, 0x03) | + cx231xx_set_field(FLD_SRC3_IN_SEL, 0x00) | + cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x00) | + cx231xx_set_field(FLD_BASEBAND_BYPASS_CTL, 0x00) | + cx231xx_set_field(FLD_AC97_SRC_SEL, 0x03) | + cx231xx_set_field(FLD_I2S_SRC_SEL, 0x00) | + cx231xx_set_field(FLD_PARALLEL2_SRC_SEL, 0x02) | + cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x01)); + + /* Setup the AUD_IO control */ + status = vid_blk_write_word(dev, AUD_IO_CTRL, + cx231xx_set_field(FLD_I2S_PORT_DIR, 0x00) | + cx231xx_set_field(FLD_I2S_OUT_SRC, 0x00) | + cx231xx_set_field(FLD_AUD_CHAN3_SRC, 0x00) | + cx231xx_set_field(FLD_AUD_CHAN2_SRC, 0x00) | + cx231xx_set_field(FLD_AUD_CHAN1_SRC, 0x03)); + + status = vid_blk_write_word(dev, PATH1_CTL1, 0x1F063870); + + /* setAudioStandard(_audio_standard); */ + status = vid_blk_write_word(dev, PATH1_CTL1, 0x00063870); + + status = restartAudioFirmware(dev); + + switch (dev->board.tuner_type) { + case TUNER_XC5000: + /* SIF passthrough at 28.6363 MHz sample rate */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + CHIP_CTRL, + FLD_SIF_EN, + cx231xx_set_field(FLD_SIF_EN, 1)); + break; + case TUNER_NXP_TDA18271: + /* Normal mode: SIF passthrough at 14.32 MHz */ + status = cx231xx_read_modify_write_i2c_dword(dev, + VID_BLK_I2C_ADDRESS, + CHIP_CTRL, + FLD_SIF_EN, + cx231xx_set_field(FLD_SIF_EN, 0)); + break; + default: + /* This is just a casual suggestion to people adding + new boards in case they use a tuner type we don't + currently know about */ + printk(KERN_INFO "Unknown tuner type configuring SIF"); + break; + } + break; + + case AUDIO_INPUT_TUNER_FM: + /* use SIF for FM radio + setupFM(); + setAudioStandard(_audio_standard); + */ + break; + + case AUDIO_INPUT_MUTE: + status = vid_blk_write_word(dev, PATH1_CTL1, 0x1F011012); + break; + } + + /* Take it out of soft reset */ + status = vid_blk_read_byte(dev, GENERAL_CTL, &gen_ctrl); + gen_ctrl &= ~1; + status = vid_blk_write_byte(dev, GENERAL_CTL, gen_ctrl); + + return status; +} + +/****************************************************************************** + * C H I P Specific C O N T R O L functions * + ******************************************************************************/ +int cx231xx_init_ctrl_pin_status(struct cx231xx *dev) +{ + u32 value; + int status = 0; + + status = vid_blk_read_word(dev, PIN_CTRL, &value); + value |= (~dev->board.ctl_pin_status_mask); + status = vid_blk_write_word(dev, PIN_CTRL, value); + + return status; +} + +int cx231xx_set_agc_analog_digital_mux_select(struct cx231xx *dev, + u8 analog_or_digital) +{ + int status = 0; + + /* first set the direction to output */ + status = cx231xx_set_gpio_direction(dev, + dev->board. + agc_analog_digital_select_gpio, 1); + + /* 0 - demod ; 1 - Analog mode */ + status = cx231xx_set_gpio_value(dev, + dev->board.agc_analog_digital_select_gpio, + analog_or_digital); + + return status; +} + +int cx231xx_enable_i2c_port_3(struct cx231xx *dev, bool is_port_3) +{ + u8 value[4] = { 0, 0, 0, 0 }; + int status = 0; + bool current_is_port_3; + + if (dev->board.dont_use_port_3) + is_port_3 = false; + status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, + PWR_CTL_EN, value, 4); + if (status < 0) + return status; + + current_is_port_3 = value[0] & I2C_DEMOD_EN ? true : false; + + /* Just return, if already using the right port */ + if (current_is_port_3 == is_port_3) + return 0; + + if (is_port_3) + value[0] |= I2C_DEMOD_EN; + else + value[0] &= ~I2C_DEMOD_EN; + + cx231xx_info("Changing the i2c master port to %d\n", + is_port_3 ? 3 : 1); + + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + + return status; + +} +EXPORT_SYMBOL_GPL(cx231xx_enable_i2c_port_3); + +void update_HH_register_after_set_DIF(struct cx231xx *dev) +{ +/* + u8 status = 0; + u32 value = 0; + + vid_blk_write_word(dev, PIN_CTRL, 0xA0FFF82F); + vid_blk_write_word(dev, DIF_MISC_CTRL, 0x0A203F11); + vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 0x1BEFBF06); + + status = vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); + vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390); + status = vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); +*/ +} + +void cx231xx_dump_HH_reg(struct cx231xx *dev) +{ + u32 value = 0; + u16 i = 0; + + value = 0x45005390; + vid_blk_write_word(dev, 0x104, value); + + for (i = 0x100; i < 0x140; i++) { + vid_blk_read_word(dev, i, &value); + cx231xx_info("reg0x%x=0x%x\n", i, value); + i = i+3; + } + + for (i = 0x300; i < 0x400; i++) { + vid_blk_read_word(dev, i, &value); + cx231xx_info("reg0x%x=0x%x\n", i, value); + i = i+3; + } + + for (i = 0x400; i < 0x440; i++) { + vid_blk_read_word(dev, i, &value); + cx231xx_info("reg0x%x=0x%x\n", i, value); + i = i+3; + } + + vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); + cx231xx_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value); + vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390); + vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); + cx231xx_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value); +} + +void cx231xx_dump_SC_reg(struct cx231xx *dev) +{ + u8 value[4] = { 0, 0, 0, 0 }; + cx231xx_info("cx231xx_dump_SC_reg!\n"); + + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0], + value[1], value[2], value[3]); + + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0], + value[1], value[2], value[3]); + + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0], + value[1], value[2], value[3]); + + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0], + value[1], value[2], value[3]); + + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0], + value[1], value[2], value[3]); + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, + value, 4); + cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0], + value[1], value[2], value[3]); + + +} + +void cx231xx_Setup_AFE_for_LowIF(struct cx231xx *dev) + +{ + u8 value = 0; + + afe_read_byte(dev, ADC_STATUS2_CH3, &value); + value = (value & 0xFE)|0x01; + afe_write_byte(dev, ADC_STATUS2_CH3, value); + + afe_read_byte(dev, ADC_STATUS2_CH3, &value); + value = (value & 0xFE)|0x00; + afe_write_byte(dev, ADC_STATUS2_CH3, value); + + +/* + config colibri to lo-if mode + + FIXME: ntf_mode = 2'b00 by default. But set 0x1 would reduce + the diff IF input by half, + + for low-if agc defect +*/ + + afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH3, &value); + value = (value & 0xFC)|0x00; + afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH3, value); + + afe_read_byte(dev, ADC_INPUT_CH3, &value); + value = (value & 0xF9)|0x02; + afe_write_byte(dev, ADC_INPUT_CH3, value); + + afe_read_byte(dev, ADC_FB_FRCRST_CH3, &value); + value = (value & 0xFB)|0x04; + afe_write_byte(dev, ADC_FB_FRCRST_CH3, value); + + afe_read_byte(dev, ADC_DCSERVO_DEM_CH3, &value); + value = (value & 0xFC)|0x03; + afe_write_byte(dev, ADC_DCSERVO_DEM_CH3, value); + + afe_read_byte(dev, ADC_CTRL_DAC1_CH3, &value); + value = (value & 0xFB)|0x04; + afe_write_byte(dev, ADC_CTRL_DAC1_CH3, value); + + afe_read_byte(dev, ADC_CTRL_DAC23_CH3, &value); + value = (value & 0xF8)|0x06; + afe_write_byte(dev, ADC_CTRL_DAC23_CH3, value); + + afe_read_byte(dev, ADC_CTRL_DAC23_CH3, &value); + value = (value & 0x8F)|0x40; + afe_write_byte(dev, ADC_CTRL_DAC23_CH3, value); + + afe_read_byte(dev, ADC_PWRDN_CLAMP_CH3, &value); + value = (value & 0xDF)|0x20; + afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, value); +} + +void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq, + u8 spectral_invert, u32 mode) +{ + u32 colibri_carrier_offset = 0; + u32 func_mode = 0x01; /* Device has a DIF if this function is called */ + u32 standard = 0; + u8 value[4] = { 0, 0, 0, 0 }; + + cx231xx_info("Enter cx231xx_set_Colibri_For_LowIF()\n"); + value[0] = (u8) 0x6F; + value[1] = (u8) 0x6F; + value[2] = (u8) 0x6F; + value[3] = (u8) 0x6F; + cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + + /*Set colibri for low IF*/ + cx231xx_afe_set_mode(dev, AFE_MODE_LOW_IF); + + /* Set C2HH for low IF operation.*/ + standard = dev->norm; + cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode, + func_mode, standard); + + /* Get colibri offsets.*/ + colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode, + standard); + + cx231xx_info("colibri_carrier_offset=%d, standard=0x%x\n", + colibri_carrier_offset, standard); + + /* Set the band Pass filter for DIF*/ + cx231xx_set_DIF_bandpass(dev, (if_freq+colibri_carrier_offset), + spectral_invert, mode); +} + +u32 cx231xx_Get_Colibri_CarrierOffset(u32 mode, u32 standerd) +{ + u32 colibri_carrier_offset = 0; + + if (mode == TUNER_MODE_FM_RADIO) { + colibri_carrier_offset = 1100000; + } else if (standerd & (V4L2_STD_MN | V4L2_STD_NTSC_M_JP)) { + colibri_carrier_offset = 4832000; /*4.83MHz */ + } else if (standerd & (V4L2_STD_PAL_B | V4L2_STD_PAL_G)) { + colibri_carrier_offset = 2700000; /*2.70MHz */ + } else if (standerd & (V4L2_STD_PAL_D | V4L2_STD_PAL_I + | V4L2_STD_SECAM)) { + colibri_carrier_offset = 2100000; /*2.10MHz */ + } + + return colibri_carrier_offset; +} + +void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq, + u8 spectral_invert, u32 mode) +{ + unsigned long pll_freq_word; + u32 dif_misc_ctrl_value = 0; + u64 pll_freq_u64 = 0; + u32 i = 0; + + cx231xx_info("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n", + if_freq, spectral_invert, mode); + + + if (mode == TUNER_MODE_FM_RADIO) { + pll_freq_word = 0x905A1CAC; + vid_blk_write_word(dev, DIF_PLL_FREQ_WORD, pll_freq_word); + + } else /*KSPROPERTY_TUNER_MODE_TV*/{ + /* Calculate the PLL frequency word based on the adjusted if_freq*/ + pll_freq_word = if_freq; + pll_freq_u64 = (u64)pll_freq_word << 28L; + do_div(pll_freq_u64, 50000000); + pll_freq_word = (u32)pll_freq_u64; + /*pll_freq_word = 0x3463497;*/ + vid_blk_write_word(dev, DIF_PLL_FREQ_WORD, pll_freq_word); + + if (spectral_invert) { + if_freq -= 400000; + /* Enable Spectral Invert*/ + vid_blk_read_word(dev, DIF_MISC_CTRL, + &dif_misc_ctrl_value); + dif_misc_ctrl_value = dif_misc_ctrl_value | 0x00200000; + vid_blk_write_word(dev, DIF_MISC_CTRL, + dif_misc_ctrl_value); + } else { + if_freq += 400000; + /* Disable Spectral Invert*/ + vid_blk_read_word(dev, DIF_MISC_CTRL, + &dif_misc_ctrl_value); + dif_misc_ctrl_value = dif_misc_ctrl_value & 0xFFDFFFFF; + vid_blk_write_word(dev, DIF_MISC_CTRL, + dif_misc_ctrl_value); + } + + if_freq = (if_freq/100000)*100000; + + if (if_freq < 3000000) + if_freq = 3000000; + + if (if_freq > 16000000) + if_freq = 16000000; + } + + cx231xx_info("Enter IF=%zd\n", + ARRAY_SIZE(Dif_set_array)); + for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) { + if (Dif_set_array[i].if_freq == if_freq) { + vid_blk_write_word(dev, + Dif_set_array[i].register_address, Dif_set_array[i].value); + } + } +} + +/****************************************************************************** + * D I F - B L O C K C O N T R O L functions * + ******************************************************************************/ +int cx231xx_dif_configure_C2HH_for_low_IF(struct cx231xx *dev, u32 mode, + u32 function_mode, u32 standard) +{ + int status = 0; + + + if (mode == V4L2_TUNER_RADIO) { + /* C2HH */ + /* lo if big signal */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); + /* FUNC_MODE = DIF */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); + /* IF_MODE */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xFF); + /* no inv */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); + } else if (standard != DIF_USE_BASEBAND) { + if (standard & V4L2_STD_MN) { + /* lo if big signal */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); + /* FUNC_MODE = DIF */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 23, 24, + function_mode); + /* IF_MODE */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xb); + /* no inv */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); + /* 0x124, AUD_CHAN1_SRC = 0x3 */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AUD_IO_CTRL, 0, 31, 0x00000003); + } else if ((standard == V4L2_STD_PAL_I) | + (standard & V4L2_STD_PAL_D) | + (standard & V4L2_STD_SECAM)) { + /* C2HH setup */ + /* lo if big signal */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); + /* FUNC_MODE = DIF */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 23, 24, + function_mode); + /* IF_MODE */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xF); + /* no inv */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); + } else { + /* default PAL BG */ + /* C2HH setup */ + /* lo if big signal */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); + /* FUNC_MODE = DIF */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 23, 24, + function_mode); + /* IF_MODE */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xE); + /* no inv */ + status = cx231xx_reg_mask_write(dev, + VID_BLK_I2C_ADDRESS, 32, + AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); + } + } + + return status; +} + +int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard) +{ + int status = 0; + u32 dif_misc_ctrl_value = 0; + u32 func_mode = 0; + + cx231xx_info("%s: setStandard to %x\n", __func__, standard); + + status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value); + if (standard != DIF_USE_BASEBAND) + dev->norm = standard; + + switch (dev->model) { + case CX231XX_BOARD_CNXT_CARRAERA: + case CX231XX_BOARD_CNXT_RDE_250: + case CX231XX_BOARD_CNXT_SHELBY: + case CX231XX_BOARD_CNXT_RDU_250: + case CX231XX_BOARD_CNXT_VIDEO_GRABBER: + case CX231XX_BOARD_HAUPPAUGE_EXETER: + func_mode = 0x03; + break; + case CX231XX_BOARD_CNXT_RDE_253S: + case CX231XX_BOARD_CNXT_RDU_253S: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: + func_mode = 0x01; + break; + default: + func_mode = 0x01; + } + + status = cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode, + func_mode, standard); + + if (standard == DIF_USE_BASEBAND) { /* base band */ + /* There is a different SRC_PHASE_INC value + for baseband vs. DIF */ + status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 0xDF7DF83); + status = vid_blk_read_word(dev, DIF_MISC_CTRL, + &dif_misc_ctrl_value); + dif_misc_ctrl_value |= FLD_DIF_DIF_BYPASS; + status = vid_blk_write_word(dev, DIF_MISC_CTRL, + dif_misc_ctrl_value); + } else if (standard & V4L2_STD_PAL_D) { + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL, 0, 31, 0x6503bc0c); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL1, 0, 31, 0xbd038c85); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL2, 0, 31, 0x1db4640a); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL3, 0, 31, 0x00008800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_REF, 0, 31, 0x444C1380); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_IF, 0, 31, 0xDA302600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_INT, 0, 31, 0xDA261700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_RF, 0, 31, 0xDA262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_INT_CURRENT, 0, 31, + 0x26001700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_RF_CURRENT, 0, 31, + 0x00002660); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VIDEO_AGC_CTRL, 0, 31, + 0x72500800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VID_AUD_OVERRIDE, 0, 31, + 0x27000100); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AV_SEP_CTRL, 0, 31, 0x3F3934EA); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_COMP_FLT_CTRL, 0, 31, + 0x00000000); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_PHASE_INC, 0, 31, + 0x1befbf06); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_GAIN_CONTROL, 0, 31, + 0x000035e8); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_RPT_VARIANCE, 0, 31, 0x00000000); + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3a023F11; + } else if (standard & V4L2_STD_PAL_I) { + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL, 0, 31, 0x6503bc0c); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL1, 0, 31, 0xbd038c85); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL2, 0, 31, 0x1db4640a); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL3, 0, 31, 0x00008800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_REF, 0, 31, 0x444C1380); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_IF, 0, 31, 0xDA302600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_INT, 0, 31, 0xDA261700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_RF, 0, 31, 0xDA262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_INT_CURRENT, 0, 31, + 0x26001700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_RF_CURRENT, 0, 31, + 0x00002660); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VIDEO_AGC_CTRL, 0, 31, + 0x72500800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VID_AUD_OVERRIDE, 0, 31, + 0x27000100); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AV_SEP_CTRL, 0, 31, 0x5F39A934); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_COMP_FLT_CTRL, 0, 31, + 0x00000000); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_PHASE_INC, 0, 31, + 0x1befbf06); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_GAIN_CONTROL, 0, 31, + 0x000035e8); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_RPT_VARIANCE, 0, 31, 0x00000000); + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3a033F11; + } else if (standard & V4L2_STD_PAL_M) { + /* improved Low Frequency Phase Noise */ + status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0xFF01FF0C); + status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xbd038c85); + status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1db4640a); + status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800); + status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C1380); + status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT, + 0x26001700); + status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT, + 0x00002660); + status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL, + 0x72500800); + status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE, + 0x27000100); + status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 0x012c405d); + status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL, + 0x009f50c1); + status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, + 0x1befbf06); + status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL, + 0x000035e8); + status = vid_blk_write_word(dev, DIF_SOFT_RST_CTRL_REVB, + 0x00000000); + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3A0A3F10; + } else if (standard & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) { + /* improved Low Frequency Phase Noise */ + status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0xFF01FF0C); + status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xbd038c85); + status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1db4640a); + status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800); + status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C1380); + status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT, + 0x26001700); + status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT, + 0x00002660); + status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL, + 0x72500800); + status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE, + 0x27000100); + status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, + 0x012c405d); + status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL, + 0x009f50c1); + status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, + 0x1befbf06); + status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL, + 0x000035e8); + status = vid_blk_write_word(dev, DIF_SOFT_RST_CTRL_REVB, + 0x00000000); + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value = 0x3A093F10; + } else if (standard & + (V4L2_STD_SECAM_B | V4L2_STD_SECAM_D | V4L2_STD_SECAM_G | + V4L2_STD_SECAM_K | V4L2_STD_SECAM_K1)) { + + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL, 0, 31, 0x6503bc0c); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL1, 0, 31, 0xbd038c85); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL2, 0, 31, 0x1db4640a); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL3, 0, 31, 0x00008800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_REF, 0, 31, 0x888C0380); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_IF, 0, 31, 0xe0262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_INT, 0, 31, 0xc2171700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_RF, 0, 31, 0xc2262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_INT_CURRENT, 0, 31, + 0x26001700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_RF_CURRENT, 0, 31, + 0x00002660); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VID_AUD_OVERRIDE, 0, 31, + 0x27000100); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_COMP_FLT_CTRL, 0, 31, + 0x00000000); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_PHASE_INC, 0, 31, + 0x1befbf06); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_GAIN_CONTROL, 0, 31, + 0x000035e8); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_RPT_VARIANCE, 0, 31, 0x00000000); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VIDEO_AGC_CTRL, 0, 31, + 0xf4000000); + + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3a023F11; + } else if (standard & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) { + /* Is it SECAM_L1? */ + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL, 0, 31, 0x6503bc0c); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL1, 0, 31, 0xbd038c85); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL2, 0, 31, 0x1db4640a); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL3, 0, 31, 0x00008800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_REF, 0, 31, 0x888C0380); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_IF, 0, 31, 0xe0262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_INT, 0, 31, 0xc2171700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_RF, 0, 31, 0xc2262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_INT_CURRENT, 0, 31, + 0x26001700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_RF_CURRENT, 0, 31, + 0x00002660); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VID_AUD_OVERRIDE, 0, 31, + 0x27000100); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_COMP_FLT_CTRL, 0, 31, + 0x00000000); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_PHASE_INC, 0, 31, + 0x1befbf06); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_GAIN_CONTROL, 0, 31, + 0x000035e8); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_RPT_VARIANCE, 0, 31, 0x00000000); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VIDEO_AGC_CTRL, 0, 31, + 0xf2560000); + + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3a023F11; + + } else if (standard & V4L2_STD_NTSC_M) { + /* V4L2_STD_NTSC_M (75 IRE Setup) Or + V4L2_STD_NTSC_M_JP (Japan, 0 IRE Setup) */ + + /* For NTSC the centre frequency of video coming out of + sidewinder is around 7.1MHz or 3.6MHz depending on the + spectral inversion. so for a non spectrally inverted channel + the pll freq word is 0x03420c49 + */ + + status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0x6503BC0C); + status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xBD038C85); + status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1DB4640A); + status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800); + status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C0380); + status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT, + 0x26001700); + status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT, + 0x00002660); + status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL, + 0x04000800); + status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE, + 0x27000100); + status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 0x01296e1f); + + status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL, + 0x009f50c1); + status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, + 0x1befbf06); + status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL, + 0x000035e8); + + status = vid_blk_write_word(dev, DIF_AGC_CTRL_IF, 0xC2262600); + status = vid_blk_write_word(dev, DIF_AGC_CTRL_INT, + 0xC2262600); + status = vid_blk_write_word(dev, DIF_AGC_CTRL_RF, 0xC2262600); + + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3a003F10; + } else { + /* default PAL BG */ + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL, 0, 31, 0x6503bc0c); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL1, 0, 31, 0xbd038c85); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL2, 0, 31, 0x1db4640a); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_PLL_CTRL3, 0, 31, 0x00008800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_REF, 0, 31, 0x444C1380); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_IF, 0, 31, 0xDA302600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_INT, 0, 31, 0xDA261700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_CTRL_RF, 0, 31, 0xDA262600); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_IF_INT_CURRENT, 0, 31, + 0x26001700); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AGC_RF_CURRENT, 0, 31, + 0x00002660); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VIDEO_AGC_CTRL, 0, 31, + 0x72500800); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_VID_AUD_OVERRIDE, 0, 31, + 0x27000100); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_AV_SEP_CTRL, 0, 31, 0x3F3530EC); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_COMP_FLT_CTRL, 0, 31, + 0x00A653A8); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_PHASE_INC, 0, 31, + 0x1befbf06); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_SRC_GAIN_CONTROL, 0, 31, + 0x000035e8); + status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, + DIF_RPT_VARIANCE, 0, 31, 0x00000000); + /* Save the Spec Inversion value */ + dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; + dif_misc_ctrl_value |= 0x3a013F11; + } + + /* The AGC values should be the same for all standards, + AUD_SRC_SEL[19] should always be disabled */ + dif_misc_ctrl_value &= ~FLD_DIF_AUD_SRC_SEL; + + /* It is still possible to get Set Standard calls even when we + are in FM mode. + This is done to override the value for FM. */ + if (dev->active_mode == V4L2_TUNER_RADIO) + dif_misc_ctrl_value = 0x7a080000; + + /* Write the calculated value for misc ontrol register */ + status = vid_blk_write_word(dev, DIF_MISC_CTRL, dif_misc_ctrl_value); + + return status; +} + +int cx231xx_tuner_pre_channel_change(struct cx231xx *dev) +{ + int status = 0; + u32 dwval; + + /* Set the RF and IF k_agc values to 3 */ + status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval); + dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF); + dwval |= 0x33000000; + + status = vid_blk_write_word(dev, DIF_AGC_IF_REF, dwval); + + return status; +} + +int cx231xx_tuner_post_channel_change(struct cx231xx *dev) +{ + int status = 0; + u32 dwval; + cx231xx_info("cx231xx_tuner_post_channel_change dev->tuner_type =0%d\n", + dev->tuner_type); + /* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for + * SECAM L/B/D standards */ + status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval); + dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF); + + if (dev->norm & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_B | + V4L2_STD_SECAM_D)) { + if (dev->tuner_type == TUNER_NXP_TDA18271) { + dwval &= ~FLD_DIF_IF_REF; + dwval |= 0x88000300; + } else + dwval |= 0x88000000; + } else { + if (dev->tuner_type == TUNER_NXP_TDA18271) { + dwval &= ~FLD_DIF_IF_REF; + dwval |= 0xCC000300; + } else + dwval |= 0x44000000; + } + + status = vid_blk_write_word(dev, DIF_AGC_IF_REF, dwval); + + return status; +} + +/****************************************************************************** + * I 2 S - B L O C K C O N T R O L functions * + ******************************************************************************/ +int cx231xx_i2s_blk_initialize(struct cx231xx *dev) +{ + int status = 0; + u32 value; + + status = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL1, 1, &value, 1); + /* enables clock to delta-sigma and decimation filter */ + value |= 0x80; + status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL1, 1, value, 1); + /* power up all channel */ + status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL2, 1, 0x00, 1); + + return status; +} + +int cx231xx_i2s_blk_update_power_control(struct cx231xx *dev, + enum AV_MODE avmode) +{ + int status = 0; + u32 value = 0; + + if (avmode != POLARIS_AVMODE_ENXTERNAL_AV) { + status = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL2, 1, &value, 1); + value |= 0xfe; + status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL2, 1, value, 1); + } else { + status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL2, 1, 0x00, 1); + } + + return status; +} + +/* set i2s_blk for audio input types */ +int cx231xx_i2s_blk_set_audio_input(struct cx231xx *dev, u8 audio_input) +{ + int status = 0; + + switch (audio_input) { + case CX231XX_AMUX_LINE_IN: + status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL2, 1, 0x00, 1); + status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, + CH_PWR_CTRL1, 1, 0x80, 1); + break; + case CX231XX_AMUX_VIDEO: + default: + break; + } + + dev->ctl_ainput = audio_input; + + return status; +} + +/****************************************************************************** + * P O W E R C O N T R O L functions * + ******************************************************************************/ +int cx231xx_set_power_mode(struct cx231xx *dev, enum AV_MODE mode) +{ + u8 value[4] = { 0, 0, 0, 0 }; + u32 tmp = 0; + int status = 0; + + if (dev->power_mode != mode) + dev->power_mode = mode; + else { + cx231xx_info(" setPowerMode::mode = %d, No Change req.\n", + mode); + return 0; + } + + status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, + 4); + if (status < 0) + return status; + + tmp = *((u32 *) value); + + switch (mode) { + case POLARIS_AVMODE_ENXTERNAL_AV: + + tmp &= (~PWR_MODE_MASK); + + tmp |= PWR_AV_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + + tmp |= PWR_ISO_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = + cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN, + value, 4); + msleep(PWR_SLEEP_INTERVAL); + + tmp |= POLARIS_AVMODE_ENXTERNAL_AV; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + + /* reset state of xceive tuner */ + dev->xc_fw_load_done = 0; + break; + + case POLARIS_AVMODE_ANALOGT_TV: + + tmp |= PWR_DEMOD_EN; + tmp |= (I2C_DEMOD_EN); + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + + if (!(tmp & PWR_TUNER_EN)) { + tmp |= (PWR_TUNER_EN); + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + + if (!(tmp & PWR_AV_EN)) { + tmp |= PWR_AV_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + if (!(tmp & PWR_ISO_EN)) { + tmp |= PWR_ISO_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + + if (!(tmp & POLARIS_AVMODE_ANALOGT_TV)) { + tmp |= POLARIS_AVMODE_ANALOGT_TV; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + + if (dev->board.tuner_type != TUNER_ABSENT) { + /* Enable tuner */ + cx231xx_enable_i2c_port_3(dev, true); + + /* reset the Tuner */ + if (dev->board.tuner_gpio) + cx231xx_gpio_set(dev, dev->board.tuner_gpio); + + if (dev->cx231xx_reset_analog_tuner) + dev->cx231xx_reset_analog_tuner(dev); + } + + break; + + case POLARIS_AVMODE_DIGITAL: + if (!(tmp & PWR_TUNER_EN)) { + tmp |= (PWR_TUNER_EN); + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + if (!(tmp & PWR_AV_EN)) { + tmp |= PWR_AV_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + if (!(tmp & PWR_ISO_EN)) { + tmp |= PWR_ISO_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + + tmp &= (~PWR_AV_MODE); + tmp |= POLARIS_AVMODE_DIGITAL | I2C_DEMOD_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + + if (!(tmp & PWR_DEMOD_EN)) { + tmp |= PWR_DEMOD_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + + if (dev->board.tuner_type != TUNER_ABSENT) { + /* + * Enable tuner + * Hauppauge Exeter seems to need to do something different! + */ + if (dev->model == CX231XX_BOARD_HAUPPAUGE_EXETER) + cx231xx_enable_i2c_port_3(dev, false); + else + cx231xx_enable_i2c_port_3(dev, true); + + /* reset the Tuner */ + if (dev->board.tuner_gpio) + cx231xx_gpio_set(dev, dev->board.tuner_gpio); + + if (dev->cx231xx_reset_analog_tuner) + dev->cx231xx_reset_analog_tuner(dev); + } + break; + + default: + break; + } + + msleep(PWR_SLEEP_INTERVAL); + + /* For power saving, only enable Pwr_resetout_n + when digital TV is selected. */ + if (mode == POLARIS_AVMODE_DIGITAL) { + tmp |= PWR_RESETOUT_EN; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + PWR_CTL_EN, value, 4); + msleep(PWR_SLEEP_INTERVAL); + } + + /* update power control for afe */ + status = cx231xx_afe_update_power_control(dev, mode); + + /* update power control for i2s_blk */ + status = cx231xx_i2s_blk_update_power_control(dev, mode); + + status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, + 4); + + return status; +} + +int cx231xx_power_suspend(struct cx231xx *dev) +{ + u8 value[4] = { 0, 0, 0, 0 }; + u32 tmp = 0; + int status = 0; + + status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, + value, 4); + if (status > 0) + return status; + + tmp = *((u32 *) value); + tmp &= (~PWR_MODE_MASK); + + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN, + value, 4); + + return status; +} + +/****************************************************************************** + * S T R E A M C O N T R O L functions * + ******************************************************************************/ +int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask) +{ + u8 value[4] = { 0x0, 0x0, 0x0, 0x0 }; + u32 tmp = 0; + int status = 0; + + cx231xx_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask); + status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, + value, 4); + if (status < 0) + return status; + + tmp = *((u32 *) value); + tmp |= ep_mask; + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET, + value, 4); + + return status; +} + +int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask) +{ + u8 value[4] = { 0x0, 0x0, 0x0, 0x0 }; + u32 tmp = 0; + int status = 0; + + cx231xx_info("cx231xx_stop_stream():: ep_mask = %x\n", ep_mask); + status = + cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4); + if (status < 0) + return status; + + tmp = *((u32 *) value); + tmp &= (~ep_mask); + value[0] = (u8) tmp; + value[1] = (u8) (tmp >> 8); + value[2] = (u8) (tmp >> 16); + value[3] = (u8) (tmp >> 24); + + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET, + value, 4); + + return status; +} + +int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) +{ + int status = 0; + u32 value = 0; + u8 val[4] = { 0, 0, 0, 0 }; + + if (dev->udev->speed == USB_SPEED_HIGH) { + switch (media_type) { + case Audio: + cx231xx_info("%s: Audio enter HANC\n", __func__); + status = + cx231xx_mode_register(dev, TS_MODE_REG, 0x9300); + break; + + case Vbi: + cx231xx_info("%s: set vanc registers\n", __func__); + status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300); + break; + + case Sliced_cc: + cx231xx_info("%s: set hanc registers\n", __func__); + status = + cx231xx_mode_register(dev, TS_MODE_REG, 0x1300); + break; + + case Raw_Video: + cx231xx_info("%s: set video registers\n", __func__); + status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); + break; + + case TS1_serial_mode: + cx231xx_info("%s: set ts1 registers", __func__); + + if (dev->board.has_417) { + cx231xx_info(" MPEG\n"); + value &= 0xFFFFFFFC; + value |= 0x3; + + status = cx231xx_mode_register(dev, TS_MODE_REG, value); + + val[0] = 0x04; + val[1] = 0xA3; + val[2] = 0x3B; + val[3] = 0x00; + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + TS1_CFG_REG, val, 4); + + val[0] = 0x00; + val[1] = 0x08; + val[2] = 0x00; + val[3] = 0x08; + status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, + TS1_LENGTH_REG, val, 4); + + } else { + cx231xx_info(" BDA\n"); + status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101); + status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x010); + } + break; + + case TS1_parallel_mode: + cx231xx_info("%s: set ts1 parallel mode registers\n", + __func__); + status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); + status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400); + break; + } + } else { + status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101); + } + + return status; +} + +int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) +{ + int rc = -1; + u32 ep_mask = -1; + struct pcb_config *pcb_config; + + /* get EP for media type */ + pcb_config = (struct pcb_config *)&dev->current_pcb_config; + + if (pcb_config->config_num) { + switch (media_type) { + case Raw_Video: + ep_mask = ENABLE_EP4; /* ep4 [00:1000] */ + break; + case Audio: + ep_mask = ENABLE_EP3; /* ep3 [00:0100] */ + break; + case Vbi: + ep_mask = ENABLE_EP5; /* ep5 [01:0000] */ + break; + case Sliced_cc: + ep_mask = ENABLE_EP6; /* ep6 [10:0000] */ + break; + case TS1_serial_mode: + case TS1_parallel_mode: + ep_mask = ENABLE_EP1; /* ep1 [00:0001] */ + break; + case TS2: + ep_mask = ENABLE_EP2; /* ep2 [00:0010] */ + break; + } + } + + if (start) { + rc = cx231xx_initialize_stream_xfer(dev, media_type); + + if (rc < 0) + return rc; + + /* enable video capture */ + if (ep_mask > 0) + rc = cx231xx_start_stream(dev, ep_mask); + } else { + /* disable video capture */ + if (ep_mask > 0) + rc = cx231xx_stop_stream(dev, ep_mask); + } + + if (dev->mode == CX231XX_ANALOG_MODE) + ;/* do any in Analog mode */ + else + ;/* do any in digital mode */ + + return rc; +} +EXPORT_SYMBOL_GPL(cx231xx_capture_start); + +/***************************************************************************** +* G P I O B I T control functions * +******************************************************************************/ +int cx231xx_set_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val) +{ + int status = 0; + + status = cx231xx_send_gpio_cmd(dev, gpio_bit, gpio_val, 4, 0, 0); + + return status; +} + +int cx231xx_get_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val) +{ + int status = 0; + + status = cx231xx_send_gpio_cmd(dev, gpio_bit, gpio_val, 4, 0, 1); + + return status; +} + +/* +* cx231xx_set_gpio_direction +* Sets the direction of the GPIO pin to input or output +* +* Parameters : +* pin_number : The GPIO Pin number to program the direction for +* from 0 to 31 +* pin_value : The Direction of the GPIO Pin under reference. +* 0 = Input direction +* 1 = Output direction +*/ +int cx231xx_set_gpio_direction(struct cx231xx *dev, + int pin_number, int pin_value) +{ + int status = 0; + u32 value = 0; + + /* Check for valid pin_number - if 32 , bail out */ + if (pin_number >= 32) + return -EINVAL; + + /* input */ + if (pin_value == 0) + value = dev->gpio_dir & (~(1 << pin_number)); /* clear */ + else + value = dev->gpio_dir | (1 << pin_number); + + status = cx231xx_set_gpio_bit(dev, value, (u8 *) &dev->gpio_val); + + /* cache the value for future */ + dev->gpio_dir = value; + + return status; +} + +/* +* cx231xx_set_gpio_value +* Sets the value of the GPIO pin to Logic high or low. The Pin under +* reference should ALREADY BE SET IN OUTPUT MODE !!!!!!!!! +* +* Parameters : +* pin_number : The GPIO Pin number to program the direction for +* pin_value : The value of the GPIO Pin under reference. +* 0 = set it to 0 +* 1 = set it to 1 +*/ +int cx231xx_set_gpio_value(struct cx231xx *dev, int pin_number, int pin_value) +{ + int status = 0; + u32 value = 0; + + /* Check for valid pin_number - if 0xFF , bail out */ + if (pin_number >= 32) + return -EINVAL; + + /* first do a sanity check - if the Pin is not output, make it output */ + if ((dev->gpio_dir & (1 << pin_number)) == 0x00) { + /* It was in input mode */ + value = dev->gpio_dir | (1 << pin_number); + dev->gpio_dir = value; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *) &dev->gpio_val); + value = 0; + } + + if (pin_value == 0) + value = dev->gpio_val & (~(1 << pin_number)); + else + value = dev->gpio_val | (1 << pin_number); + + /* store the value */ + dev->gpio_val = value; + + /* toggle bit0 of GP_IO */ + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + return status; +} + +/***************************************************************************** +* G P I O I2C related functions * +******************************************************************************/ +int cx231xx_gpio_i2c_start(struct cx231xx *dev) +{ + int status = 0; + + /* set SCL to output 1 ; set SDA to output 1 */ + dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_val |= 1 << dev->board.tuner_sda_gpio; + + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + if (status < 0) + return -EINVAL; + + /* set SCL to output 1; set SDA to output 0 */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + if (status < 0) + return -EINVAL; + + /* set SCL to output 0; set SDA to output 0 */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + if (status < 0) + return -EINVAL; + + return status; +} + +int cx231xx_gpio_i2c_end(struct cx231xx *dev) +{ + int status = 0; + + /* set SCL to output 0; set SDA to output 0 */ + dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; + + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + if (status < 0) + return -EINVAL; + + /* set SCL to output 1; set SDA to output 0 */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + if (status < 0) + return -EINVAL; + + /* set SCL to input ,release SCL cable control + set SDA to input ,release SDA cable control */ + dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio); + dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); + + status = + cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + if (status < 0) + return -EINVAL; + + return status; +} + +int cx231xx_gpio_i2c_write_byte(struct cx231xx *dev, u8 data) +{ + int status = 0; + u8 i; + + /* set SCL to output ; set SDA to output */ + dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; + + for (i = 0; i < 8; i++) { + if (((data << i) & 0x80) == 0) { + /* set SCL to output 0; set SDA to output 0 */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + + /* set SCL to output 1; set SDA to output 0 */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + + /* set SCL to output 0; set SDA to output 0 */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + } else { + /* set SCL to output 0; set SDA to output 1 */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + dev->gpio_val |= 1 << dev->board.tuner_sda_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + + /* set SCL to output 1; set SDA to output 1 */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + + /* set SCL to output 0; set SDA to output 1 */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + } + } + return status; +} + +int cx231xx_gpio_i2c_read_byte(struct cx231xx *dev, u8 *buf) +{ + u8 value = 0; + int status = 0; + u32 gpio_logic_value = 0; + u8 i; + + /* read byte */ + for (i = 0; i < 8; i++) { /* send write I2c addr */ + + /* set SCL to output 0; set SDA to input */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + + /* set SCL to output 1; set SDA to input */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + + /* get SDA data bit */ + gpio_logic_value = dev->gpio_val; + status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + if ((dev->gpio_val & (1 << dev->board.tuner_sda_gpio)) != 0) + value |= (1 << (8 - i - 1)); + + dev->gpio_val = gpio_logic_value; + } + + /* set SCL to output 0,finish the read latest SCL signal. + !!!set SDA to input, never to modify SDA direction at + the same times */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* store the value */ + *buf = value & 0xff; + + return status; +} + +int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev) +{ + int status = 0; + u32 gpio_logic_value = 0; + int nCnt = 10; + int nInit = nCnt; + + /* clock stretch; set SCL to input; set SDA to input; + get SCL value till SCL = 1 */ + dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); + dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio); + + gpio_logic_value = dev->gpio_val; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + do { + msleep(2); + status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, + (u8 *)&dev->gpio_val); + nCnt--; + } while (((dev->gpio_val & + (1 << dev->board.tuner_scl_gpio)) == 0) && + (nCnt > 0)); + + if (nCnt == 0) + cx231xx_info("No ACK after %d msec -GPIO I2C failed!", + nInit * 10); + + /* + * readAck + * through clock stretch, slave has given a SCL signal, + * so the SDA data can be directly read. + */ + status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) { + dev->gpio_val = gpio_logic_value; + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + status = 0; + } else { + dev->gpio_val = gpio_logic_value; + dev->gpio_val |= (1 << dev->board.tuner_sda_gpio); + } + + /* read SDA end, set the SCL to output 0, after this operation, + SDA direction can be changed. */ + dev->gpio_val = gpio_logic_value; + dev->gpio_dir |= (1 << dev->board.tuner_scl_gpio); + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + return status; +} + +int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev) +{ + int status = 0; + + /* set SDA to ouput */ + dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* set SCL = 0 (output); set SDA = 0 (output) */ + dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* set SCL = 1 (output); set SDA = 0 (output) */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* set SCL = 0 (output); set SDA = 0 (output) */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* set SDA to input,and then the slave will read data from SDA. */ + dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + return status; +} + +int cx231xx_gpio_i2c_write_nak(struct cx231xx *dev) +{ + int status = 0; + + /* set scl to output ; set sda to input */ + dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; + dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* set scl to output 0; set sda to input */ + dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + /* set scl to output 1; set sda to input */ + dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; + status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); + + return status; +} + +/***************************************************************************** +* G P I O I2C related functions * +******************************************************************************/ +/* cx231xx_gpio_i2c_read + * Function to read data from gpio based I2C interface + */ +int cx231xx_gpio_i2c_read(struct cx231xx *dev, u8 dev_addr, u8 *buf, u8 len) +{ + int status = 0; + int i = 0; + + /* get the lock */ + mutex_lock(&dev->gpio_i2c_lock); + + /* start */ + status = cx231xx_gpio_i2c_start(dev); + + /* write dev_addr */ + status = cx231xx_gpio_i2c_write_byte(dev, (dev_addr << 1) + 1); + + /* readAck */ + status = cx231xx_gpio_i2c_read_ack(dev); + + /* read data */ + for (i = 0; i < len; i++) { + /* read data */ + buf[i] = 0; + status = cx231xx_gpio_i2c_read_byte(dev, &buf[i]); + + if ((i + 1) != len) { + /* only do write ack if we more length */ + status = cx231xx_gpio_i2c_write_ack(dev); + } + } + + /* write NAK - inform reads are complete */ + status = cx231xx_gpio_i2c_write_nak(dev); + + /* write end */ + status = cx231xx_gpio_i2c_end(dev); + + /* release the lock */ + mutex_unlock(&dev->gpio_i2c_lock); + + return status; +} + +/* cx231xx_gpio_i2c_write + * Function to write data to gpio based I2C interface + */ +int cx231xx_gpio_i2c_write(struct cx231xx *dev, u8 dev_addr, u8 *buf, u8 len) +{ + int i = 0; + + /* get the lock */ + mutex_lock(&dev->gpio_i2c_lock); + + /* start */ + cx231xx_gpio_i2c_start(dev); + + /* write dev_addr */ + cx231xx_gpio_i2c_write_byte(dev, dev_addr << 1); + + /* read Ack */ + cx231xx_gpio_i2c_read_ack(dev); + + for (i = 0; i < len; i++) { + /* Write data */ + cx231xx_gpio_i2c_write_byte(dev, buf[i]); + + /* read Ack */ + cx231xx_gpio_i2c_read_ack(dev); + } + + /* write End */ + cx231xx_gpio_i2c_end(dev); + + /* release the lock */ + mutex_unlock(&dev->gpio_i2c_lock); + + return 0; +} |