diff options
Diffstat (limited to 'drivers/media/radio')
| -rw-r--r-- | drivers/media/radio/Kconfig | 26 | ||||
| -rw-r--r-- | drivers/media/radio/Makefile | 2 | ||||
| -rw-r--r-- | drivers/media/radio/radio-si470x.c | 1869 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/Kconfig | 24 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/Makefile | 7 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/radio-si470x-common.c | 794 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/radio-si470x-usb.c | 958 | ||||
| -rw-r--r-- | drivers/media/radio/si470x/radio-si470x.h | 201 |
8 files changed, 1989 insertions, 1892 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 3315cac875e..41bbec6df32 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -351,29 +351,11 @@ config USB_DSBR To compile this driver as a module, choose M here: the module will be called dsbr100. -config USB_SI470X - tristate "Silicon Labs Si470x FM Radio Receiver support" - depends on USB && VIDEO_V4L2 - ---help--- - This is a driver for USB devices with the Silicon Labs SI470x - chip. Currently these devices are known to work: - - 10c4:818a: Silicon Labs USB FM Radio Reference Design - - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) - - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) - - Sound is provided by the ALSA USB Audio/MIDI driver. Therefore - if you don't want to use the device solely for RDS receiving, - it is recommended to also select SND_USB_AUDIO. - - Please have a look at the documentation, especially on how - to redirect the audio stream from the radio to your sound device: - Documentation/video4linux/si470x.txt - - Say Y here if you want to connect this type of radio to your - computer's USB port. +config RADIO_SI470X + bool "Silicon Labs Si470x FM Radio Receiver support" + depends on VIDEO_V4L2 - To compile this driver as a module, choose M here: the - module will be called radio-si470x. +source "drivers/media/radio/si470x/Kconfig" config USB_MR800 tristate "AverMedia MR 800 USB FM radio support" diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index 0f2b35b3e56..18111e1fea8 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o obj-$(CONFIG_USB_DSBR) += dsbr100.o -obj-$(CONFIG_USB_SI470X) += radio-si470x.o +obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c deleted file mode 100644 index 8e6dd84ed20..00000000000 --- a/drivers/media/radio/radio-si470x.c +++ /dev/null @@ -1,1869 +0,0 @@ -/* - * drivers/media/radio/radio-si470x.c - * - * Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers: - * - Silicon Labs USB FM Radio Reference Design - * - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) - * - KWorld USB FM Radio SnapMusic Mobile 700 (FM700) - * - Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) - * - * Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -/* - * History: - * 2008-01-12 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.0 - * - First working version - * 2008-01-13 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.1 - * - Improved error handling, every function now returns errno - * - Improved multi user access (start/mute/stop) - * - Channel doesn't get lost anymore after start/mute/stop - * - RDS support added (polling mode via interrupt EP 1) - * - marked default module parameters with *value* - * - switched from bit structs to bit masks - * - header file cleaned and integrated - * 2008-01-14 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.2 - * - hex values are now lower case - * - commented USB ID for ADS/Tech moved on todo list - * - blacklisted si470x in hid-quirks.c - * - rds buffer handling functions integrated into *_work, *_read - * - rds_command in si470x_poll exchanged against simple retval - * - check for firmware version 15 - * - code order and prototypes still remain the same - * - spacing and bottom of band codes remain the same - * 2008-01-16 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.3 - * - code reordered to avoid function prototypes - * - switch/case defaults are now more user-friendly - * - unified comment style - * - applied all checkpatch.pl v1.12 suggestions - * except the warning about the too long lines with bit comments - * - renamed FMRADIO to RADIO to cut line length (checkpatch.pl) - * 2008-01-22 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.4 - * - avoid poss. locking when doing copy_to_user which may sleep - * - RDS is automatically activated on read now - * - code cleaned of unnecessary rds_commands - * - USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified - * (thanks to Guillaume RAMOUSSE) - * 2008-01-27 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.5 - * - number of seek_retries changed to tune_timeout - * - fixed problem with incomplete tune operations by own buffers - * - optimization of variables and printf types - * - improved error logging - * 2008-01-31 Tobias Lorenz <tobias.lorenz@gmx.net> - * Oliver Neukum <oliver@neukum.org> - * Version 1.0.6 - * - fixed coverity checker warnings in *_usb_driver_disconnect - * - probe()/open() race by correct ordering in probe() - * - DMA coherency rules by separate allocation of all buffers - * - use of endianness macros - * - abuse of spinlock, replaced by mutex - * - racy handling of timer in disconnect, - * replaced by delayed_work - * - racy interruptible_sleep_on(), - * replaced with wait_event_interruptible() - * - handle signals in read() - * 2008-02-08 Tobias Lorenz <tobias.lorenz@gmx.net> - * Oliver Neukum <oliver@neukum.org> - * Version 1.0.7 - * - usb autosuspend support - * - unplugging fixed - * 2008-05-07 Tobias Lorenz <tobias.lorenz@gmx.net> - * Version 1.0.8 - * - hardware frequency seek support - * - afc indication - * - more safety checks, let si470x_get_freq return errno - * - vidioc behavior corrected according to v4l2 spec - * 2008-10-20 Alexey Klimov <klimov.linux@gmail.com> - * - add support for KWorld USB FM Radio FM700 - * - blacklisted KWorld radio in hid-core.c and hid-ids.h - * 2008-12-03 Mark Lord <mlord@pobox.com> - * - add support for DealExtreme USB Radio - * 2009-01-31 Bob Ross <pigiron@gmx.com> - * - correction of stereo detection/setting - * - correction of signal strength indicator scaling - * 2009-01-31 Rick Bronson <rick@efn.org> - * Tobias Lorenz <tobias.lorenz@gmx.net> - * - add LED status output - * - get HW/SW version from scratchpad - * 2009-06-16 Edouard Lafargue <edouard@lafargue.name> - * Version 1.0.10 - * - add support for interrupt mode for RDS endpoint, - * instead of polling. - * Improves RDS reception significantly - * - * ToDo: - * - add firmware download/update support - */ - - -/* driver definitions */ -#define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>" -#define DRIVER_NAME "radio-si470x" -#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 10) -#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" -#define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" -#define DRIVER_VERSION "1.0.10" - - -/* kernel includes */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/smp_lock.h> -#include <linux/input.h> -#include <linux/usb.h> -#include <linux/hid.h> -#include <linux/version.h> -#include <linux/videodev2.h> -#include <linux/mutex.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> -#include <media/rds.h> -#include <asm/unaligned.h> - - -/* USB Device ID List */ -static struct usb_device_id si470x_usb_driver_id_table[] = { - /* Silicon Labs USB FM Radio Reference Design */ - { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, - /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ - { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, - /* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */ - { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) }, - /* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */ - { USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) }, - /* Terminating entry */ - { } -}; -MODULE_DEVICE_TABLE(usb, si470x_usb_driver_id_table); - - - -/************************************************************************** - * Module Parameters - **************************************************************************/ - -/* Radio Nr */ -static int radio_nr = -1; -module_param(radio_nr, int, 0444); -MODULE_PARM_DESC(radio_nr, "Radio Nr"); - -/* Spacing (kHz) */ -/* 0: 200 kHz (USA, Australia) */ -/* 1: 100 kHz (Europe, Japan) */ -/* 2: 50 kHz */ -static unsigned short space = 2; -module_param(space, ushort, 0444); -MODULE_PARM_DESC(space, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); - -/* Bottom of Band (MHz) */ -/* 0: 87.5 - 108 MHz (USA, Europe)*/ -/* 1: 76 - 108 MHz (Japan wide band) */ -/* 2: 76 - 90 MHz (Japan) */ -static unsigned short band = 1; -module_param(band, ushort, 0444); -MODULE_PARM_DESC(band, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); - -/* De-emphasis */ -/* 0: 75 us (USA) */ -/* 1: 50 us (Europe, Australia, Japan) */ -static unsigned short de = 1; -module_param(de, ushort, 0444); -MODULE_PARM_DESC(de, "De-emphasis: 0=75us *1=50us*"); - -/* USB timeout */ -static unsigned int usb_timeout = 500; -module_param(usb_timeout, uint, 0644); -MODULE_PARM_DESC(usb_timeout, "USB timeout (ms): *500*"); - -/* Tune timeout */ -static unsigned int tune_timeout = 3000; -module_param(tune_timeout, uint, 0644); -MODULE_PARM_DESC(tune_timeout, "Tune timeout: *3000*"); - -/* Seek timeout */ -static unsigned int seek_timeout = 5000; -module_param(seek_timeout, uint, 0644); -MODULE_PARM_DESC(seek_timeout, "Seek timeout: *5000*"); - -/* RDS buffer blocks */ -static unsigned int rds_buf = 100; -module_param(rds_buf, uint, 0444); -MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*"); - -/* RDS maximum block errors */ -static unsigned short max_rds_errors = 1; -/* 0 means 0 errors requiring correction */ -/* 1 means 1-2 errors requiring correction (used by original USBRadio.exe) */ -/* 2 means 3-5 errors requiring correction */ -/* 3 means 6+ errors or errors in checkword, correction not possible */ -module_param(max_rds_errors, ushort, 0644); -MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); - - -/************************************************************************** - * Register Definitions - **************************************************************************/ -#define RADIO_REGISTER_SIZE 2 /* 16 register bit width */ -#define RADIO_REGISTER_NUM 16 /* DEVICEID ... RDSD */ -#define RDS_REGISTER_NUM 6 /* STATUSRSSI ... RDSD */ - -#define DEVICEID 0 /* Device ID */ -#define DEVICEID_PN 0xf000 /* bits 15..12: Part Number */ -#define DEVICEID_MFGID 0x0fff /* bits 11..00: Manufacturer ID */ - -#define CHIPID 1 /* Chip ID */ -#define CHIPID_REV 0xfc00 /* bits 15..10: Chip Version */ -#define CHIPID_DEV 0x0200 /* bits 09..09: Device */ -#define CHIPID_FIRMWARE 0x01ff /* bits 08..00: Firmware Version */ - -#define POWERCFG 2 /* Power Configuration */ -#define POWERCFG_DSMUTE 0x8000 /* bits 15..15: Softmute Disable */ -#define POWERCFG_DMUTE 0x4000 /* bits 14..14: Mute Disable */ -#define POWERCFG_MONO 0x2000 /* bits 13..13: Mono Select */ -#define POWERCFG_RDSM 0x0800 /* bits 11..11: RDS Mode (Si4701 only) */ -#define POWERCFG_SKMODE 0x0400 /* bits 10..10: Seek Mode */ -#define POWERCFG_SEEKUP 0x0200 /* bits 09..09: Seek Direction */ -#define POWERCFG_SEEK 0x0100 /* bits 08..08: Seek */ -#define POWERCFG_DISABLE 0x0040 /* bits 06..06: Powerup Disable */ -#define POWERCFG_ENABLE 0x0001 /* bits 00..00: Powerup Enable */ - -#define CHANNEL 3 /* Channel */ -#define CHANNEL_TUNE 0x8000 /* bits 15..15: Tune */ -#define CHANNEL_CHAN 0x03ff /* bits 09..00: Channel Select */ - -#define SYSCONFIG1 4 /* System Configuration 1 */ -#define SYSCONFIG1_RDSIEN 0x8000 /* bits 15..15: RDS Interrupt Enable (Si4701 only) */ -#define SYSCONFIG1_STCIEN 0x4000 /* bits 14..14: Seek/Tune Complete Interrupt Enable */ -#define SYSCONFIG1_RDS 0x1000 /* bits 12..12: RDS Enable (Si4701 only) */ -#define SYSCONFIG1_DE 0x0800 /* bits 11..11: De-emphasis (0=75us 1=50us) */ -#define SYSCONFIG1_AGCD 0x0400 /* bits 10..10: AGC Disable */ -#define SYSCONFIG1_BLNDADJ 0x00c0 /* bits 07..06: Stereo/Mono Blend Level Adjustment */ -#define SYSCONFIG1_GPIO3 0x0030 /* bits 05..04: General Purpose I/O 3 */ -#define SYSCONFIG1_GPIO2 0x000c /* bits 03..02: General Purpose I/O 2 */ -#define SYSCONFIG1_GPIO1 0x0003 /* bits 01..00: General Purpose I/O 1 */ - -#define SYSCONFIG2 5 /* System Configuration 2 */ -#define SYSCONFIG2_SEEKTH 0xff00 /* bits 15..08: RSSI Seek Threshold */ -#define SYSCONFIG2_BAND 0x0080 /* bits 07..06: Band Select */ -#define SYSCONFIG2_SPACE 0x0030 /* bits 05..04: Channel Spacing */ -#define SYSCONFIG2_VOLUME 0x000f /* bits 03..00: Volume */ - -#define SYSCONFIG3 6 /* System Configuration 3 */ -#define SYSCONFIG3_SMUTER 0xc000 /* bits 15..14: Softmute Attack/Recover Rate */ -#define SYSCONFIG3_SMUTEA 0x3000 /* bits 13..12: Softmute Attenuation */ -#define SYSCONFIG3_SKSNR 0x00f0 /* bits 07..04: Seek SNR Threshold */ -#define SYSCONFIG3_SKCNT 0x000f /* bits 03..00: Seek FM Impulse Detection Threshold */ - -#define TEST1 7 /* Test 1 */ -#define TEST1_AHIZEN 0x4000 /* bits 14..14: Audio High-Z Enable */ - -#define TEST2 8 /* Test 2 */ -/* TEST2 only contains reserved bits */ - -#define BOOTCONFIG 9 /* Boot Configuration */ -/* BOOTCONFIG only contains reserved bits */ - -#define STATUSRSSI 10 /* Status RSSI */ -#define STATUSRSSI_RDSR 0x8000 /* bits 15..15: RDS Ready (Si4701 only) */ -#define STATUSRSSI_STC 0x4000 /* bits 14..14: Seek/Tune Complete */ -#define STATUSRSSI_SF 0x2000 /* bits 13..13: Seek Fail/Band Limit */ -#define STATUSRSSI_AFCRL 0x1000 /* bits 12..12: AFC Rail */ -#define STATUSRSSI_RDSS 0x0800 /* bits 11..11: RDS Synchronized (Si4701 only) */ -#define STATUSRSSI_BLERA 0x0600 /* bits 10..09: RDS Block A Errors (Si4701 only) */ -#define STATUSRSSI_ST 0x0100 /* bits 08..08: Stereo Indicator */ -#define STATUSRSSI_RSSI 0x00ff /* bits 07..00: RSSI (Received Signal Strength Indicator) */ - -#define READCHAN 11 /* Read Channel */ -#define READCHAN_BLERB 0xc000 /* bits 15..14: RDS Block D Errors (Si4701 only) */ -#define READCHAN_BLERC 0x3000 /* bits 13..12: RDS Block C Errors (Si4701 only) */ -#define READCHAN_BLERD 0x0c00 /* bits 11..10: RDS Block B Errors (Si4701 only) */ -#define READCHAN_READCHAN 0x03ff /* bits 09..00: Read Channel */ - -#define RDSA 12 /* RDSA */ -#define RDSA_RDSA 0xffff /* bits 15..00: RDS Block A Data (Si4701 only) */ - -#define RDSB 13 /* RDSB */ -#define RDSB_RDSB 0xffff /* bits 15..00: RDS Block B Data (Si4701 only) */ - -#define RDSC 14 /* RDSC */ -#define RDSC_RDSC 0xffff /* bits 15..00: RDS Block C Data (Si4701 only) */ - -#define RDSD 15 /* RDSD */ -#define RDSD_RDSD 0xffff /* bits 15..00: RDS Block D Data (Si4701 only) */ - - - -/************************************************************************** - * USB HID Reports - **************************************************************************/ - -/* Reports 1-16 give direct read/write access to the 16 Si470x registers */ -/* with the (REPORT_ID - 1) corresponding to the register address across USB */ -/* endpoint 0 using GET_REPORT and SET_REPORT */ -#define REGISTER_REPORT_SIZE (RADIO_REGISTER_SIZE + 1) -#define REGISTER_REPORT(reg) ((reg) + 1) - -/* Report 17 gives direct read/write access to the entire Si470x register */ -/* map across endpoint 0 using GET_REPORT and SET_REPORT */ -#define ENTIRE_REPORT_SIZE (RADIO_REGISTER_NUM * RADIO_REGISTER_SIZE + 1) -#define ENTIRE_REPORT 17 - -/* Report 18 is used to send the lowest 6 Si470x registers up the HID */ -/* interrupt endpoint 1 to Windows every 20 milliseconds for status */ -#define RDS_REPORT_SIZE (RDS_REGISTER_NUM * RADIO_REGISTER_SIZE + 1) -#define RDS_REPORT 18 - -/* Report 19: LED state */ -#define LED_REPORT_SIZE 3 -#define LED_REPORT 19 - -/* Report 19: stream */ -#define STREAM_REPORT_SIZE 3 -#define STREAM_REPORT 19 - -/* Report 20: scratch */ -#define SCRATCH_PAGE_SIZE 63 -#define SCRATCH_REPORT_SIZE (SCRATCH_PAGE_SIZE + 1) -#define SCRATCH_REPORT 20 - -/* Reports 19-22: flash upgrade of the C8051F321 */ -#define WRITE_REPORT_SIZE 4 -#define WRITE_REPORT 19 -#define FLASH_REPORT_SIZE 64 -#define FLASH_REPORT 20 -#define CRC_REPORT_SIZE 3 -#define CRC_REPORT 21 -#define RESPONSE_REPORT_SIZE 2 -#define RESPONSE_REPORT 22 - -/* Report 23: currently unused, but can accept 60 byte reports on the HID */ -/* interrupt out endpoint 2 every 1 millisecond */ -#define UNUSED_REPORT 23 - - - -/************************************************************************** - * Software/Hardware Versions - **************************************************************************/ -#define RADIO_SW_VERSION_NOT_BOOTLOADABLE 6 -#define RADIO_SW_VERSION 7 -#define RADIO_SW_VERSION_CURRENT 15 -#define RADIO_HW_VERSION 1 - -#define SCRATCH_PAGE_SW_VERSION 1 -#define SCRATCH_PAGE_HW_VERSION 2 - - - -/************************************************************************** - * LED State Definitions - **************************************************************************/ -#define LED_COMMAND 0x35 - -#define NO_CHANGE_LED 0x00 -#define ALL_COLOR_LED 0x01 /* streaming state */ -#define BLINK_GREEN_LED 0x02 /* connect state */ -#define BLINK_RED_LED 0x04 -#define BLINK_ORANGE_LED 0x10 /* disconnect state */ -#define SOLID_GREEN_LED 0x20 /* tuning/seeking state */ -#define SOLID_RED_LED 0x40 /* bootload state */ -#define SOLID_ORANGE_LED 0x80 - - - -/************************************************************************** - * Stream State Definitions - **************************************************************************/ -#define STREAM_COMMAND 0x36 -#define STREAM_VIDPID 0x00 -#define STREAM_AUDIO 0xff - - - -/************************************************************************** - * Bootloader / Flash Commands - **************************************************************************/ - -/* unique id sent to bootloader and required to put into a bootload state */ -#define UNIQUE_BL_ID 0x34 - -/* mask for the flash data */ -#define FLASH_DATA_MASK 0x55 - -/* bootloader commands */ -#define GET_SW_VERSION_COMMAND 0x00 -#define SET_PAGE_COMMAND 0x01 -#define ERASE_PAGE_COMMAND 0x02 -#define WRITE_PAGE_COMMAND 0x03 -#define CRC_ON_PAGE_COMMAND 0x04 -#define READ_FLASH_BYTE_COMMAND 0x05 -#define RESET_DEVICE_COMMAND 0x06 -#define GET_HW_VERSION_COMMAND 0x07 -#define BLANK 0xff - -/* bootloader command responses */ -#define COMMAND_OK 0x01 -#define COMMAND_FAILED 0x02 -#define COMMAND_PENDING 0x03 - - - -/************************************************************************** - * General Driver Definitions - **************************************************************************/ - -/* - * si470x_device - private data - */ -struct si470x_device { - /* reference to USB and video device */ - struct usb_device *usbdev; - struct usb_interface *intf; - struct video_device *videodev; - - /* Interrupt endpoint handling */ - char *int_in_buffer; - struct usb_endpoint_descriptor *int_in_endpoint; - struct urb *int_in_urb; - int int_in_running; - - /* driver management */ - unsigned int users; - unsigned char disconnected; - struct mutex disconnect_lock; - - /* Silabs internal registers (0..15) */ - unsigned short registers[RADIO_REGISTER_NUM]; - - /* RDS receive buffer */ - wait_queue_head_t read_queue; - struct mutex lock; /* buffer locking */ - unsigned char *buffer; /* size is always multiple of three */ - unsigned int buf_size; - unsigned int rd_index; - unsigned int wr_index; - - /* scratch page */ - unsigned char software_version; - unsigned char hardware_version; -}; - - -/* - * The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW, - * 62.5 kHz otherwise. - * The tuner is able to have a channel spacing of 50, 100 or 200 kHz. - * tuner->capability is therefore set to V4L2_TUNER_CAP_LOW - * The FREQ_MUL is then: 1 MHz / 62.5 Hz = 16000 - */ -#define FREQ_MUL (1000000 / 62.5) - - - -/************************************************************************** - * General Driver Functions - REGISTER_REPORTs - **************************************************************************/ - -/* - * si470x_get_report - receive a HID report - */ -static int si470x_get_report(struct si470x_device *radio, void *buf, int size) -{ - unsigned char *report = (unsigned char *) buf; - int retval; - - retval = usb_control_msg(radio->usbdev, - usb_rcvctrlpipe(radio->usbdev, 0), - HID_REQ_GET_REPORT, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - report[0], 2, - buf, size, usb_timeout); - - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": si470x_get_report: usb_control_msg returned %d\n", - retval); - return retval; -} - - -/* - * si470x_set_report - send a HID report - */ -static int si470x_set_report(struct si470x_device *radio, void *buf, int size) -{ - unsigned char *report = (unsigned char *) buf; - int retval; - - retval = usb_control_msg(radio->usbdev, - usb_sndctrlpipe(radio->usbdev, 0), - HID_REQ_SET_REPORT, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, - report[0], 2, - buf, size, usb_timeout); - - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": si470x_set_report: usb_control_msg returned %d\n", - retval); - return retval; -} - - -/* - * si470x_get_register - read register - */ -static int si470x_get_register(struct si470x_device *radio, int regnr) -{ - unsigned char buf[REGISTER_REPORT_SIZE]; - int retval; - - buf[0] = REGISTER_REPORT(regnr); - - retval = si470x_get_report(radio, (void *) &buf, sizeof(buf)); - - if (retval >= 0) - radio->registers[regnr] = get_unaligned_be16(&buf[1]); - - return (retval < 0) ? -EINVAL : 0; -} - - -/* - * si470x_set_register - write register - */ -static int si470x_set_register(struct si470x_device *radio, int regnr) -{ - unsigned char buf[REGISTER_REPORT_SIZE]; - int retval; - - buf[0] = REGISTER_REPORT(regnr); - put_unaligned_be16(radio->registers[regnr], &buf[1]); - - retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); - - return (retval < 0) ? -EINVAL : 0; -} - - -/* - * si470x_set_chan - set the channel - */ -static int si470x_set_chan(struct si470x_device *radio, unsigned short chan) -{ - int retval; - unsigned long timeout; - bool timed_out = 0; - - /* start tuning */ - radio->registers[CHANNEL] &= ~CHANNEL_CHAN; - radio->registers[CHANNEL] |= CHANNEL_TUNE | chan; - retval = si470x_set_register(radio, CHANNEL); - if (retval < 0) - goto done; - - /* wait till tune operation has completed */ - timeout = jiffies + msecs_to_jiffies(tune_timeout); - do { - retval = si470x_get_register(radio, STATUSRSSI); - if (retval < 0) - goto stop; - timed_out = time_after(jiffies, timeout); - } while (((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) && - (!timed_out)); - if ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) - printk(KERN_WARNING DRIVER_NAME ": tune does not complete\n"); - if (timed_out) - printk(KERN_WARNING DRIVER_NAME - ": tune timed out after %u ms\n", tune_timeout); - -stop: - /* stop tuning */ - radio->registers[CHANNEL] &= ~CHANNEL_TUNE; - retval = si470x_set_register(radio, CHANNEL); - -done: - return retval; -} - - -/* - * si470x_get_freq - get the frequency - */ -static int si470x_get_freq(struct si470x_device *radio, unsigned int *freq) -{ - unsigned int spacing, band_bottom; - unsigned short chan; - int retval; - - /* Spacing (kHz) */ - switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { - /* 0: 200 kHz (USA, Australia) */ - case 0: - spacing = 0.200 * FREQ_MUL; break; - /* 1: 100 kHz (Europe, Japan) */ - case 1: - spacing = 0.100 * FREQ_MUL; break; - /* 2: 50 kHz */ - default: - spacing = 0.050 * FREQ_MUL; break; - }; - - /* Bottom of Band (MHz) */ - switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { - /* 0: 87.5 - 108 MHz (USA, Europe) */ - case 0: - band_bottom = 87.5 * FREQ_MUL; break; - /* 1: 76 - 108 MHz (Japan wide band) */ - default: - band_bottom = 76 * FREQ_MUL; break; - /* 2: 76 - 90 MHz (Japan) */ - case 2: - band_bottom = 76 * FREQ_MUL; break; - }; - - /* read channel */ - retval = si470x_get_register(radio, READCHAN); - chan = radio->registers[READCHAN] & READCHAN_READCHAN; - - /* Frequency (MHz) = Spacing (kHz) x Channel + Bottom of Band (MHz) */ - *freq = chan * spacing + band_bottom; - - return retval; -} - - -/* - * si470x_set_freq - set the frequency - */ -static int si470x_set_freq(struct si470x_device *radio, unsigned int freq) -{ - unsigned int spacing, band_bottom; - unsigned short chan; - - /* Spacing (kHz) */ - switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { - /* 0: 200 kHz (USA, Australia) */ - case 0: - spacing = 0.200 * FREQ_MUL; break; - /* 1: 100 kHz (Europe, Japan) */ - case 1: - spacing = 0.100 * FREQ_MUL; break; - /* 2: 50 kHz */ - default: - spacing = 0.050 * FREQ_MUL; break; - }; - - /* Bottom of Band (MHz) */ - switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { - /* 0: 87.5 - 108 MHz (USA, Europe) */ - case 0: - band_bottom = 87.5 * FREQ_MUL; break; - /* 1: 76 - 108 MHz (Japan wide band) */ - default: - band_bottom = 76 * FREQ_MUL; break; - /* 2: 76 - 90 MHz (Japan) */ - case 2: - band_bottom = 76 * FREQ_MUL; break; - }; - - /* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */ - chan = (freq - band_bottom) / spacing; - - return si470x_set_chan(radio, chan); -} - - -/* - * si470x_set_seek - set seek - */ -static int si470x_set_seek(struct si470x_device *radio, - unsigned int wrap_around, unsigned int seek_upward) -{ - int retval = 0; - unsigned long timeout; - bool timed_out = 0; - - /* start seeking */ - radio->registers[POWERCFG] |= POWERCFG_SEEK; - if (wrap_around == 1) - radio->registers[POWERCFG] &= ~POWERCFG_SKMODE; - else - radio->registers[POWERCFG] |= POWERCFG_SKMODE; - if (seek_upward == 1) - radio->registers[POWERCFG] |= POWERCFG_SEEKUP; - else - radio->registers[POWERCFG] &= ~POWERCFG_SEEKUP; - retval = si470x_set_register(radio, POWERCFG); - if (retval < 0) - goto done; - - /* wait till seek operation has completed */ - timeout = jiffies + msecs_to_jiffies(seek_timeout); - do { - retval = si470x_get_register(radio, STATUSRSSI); - if (retval < 0) - goto stop; - timed_out = time_after(jiffies, timeout); - } while (((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) && - (!timed_out)); - if ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0) - printk(KERN_WARNING DRIVER_NAME ": seek does not complete\n"); - if (radio->registers[STATUSRSSI] & STATUSRSSI_SF) - printk(KERN_WARNING DRIVER_NAME - ": seek failed / band limit reached\n"); - if (timed_out) - printk(KERN_WARNING DRIVER_NAME - ": seek timed out after %u ms\n", seek_timeout); - -stop: - /* stop seeking */ - radio->registers[POWERCFG] &= ~POWERCFG_SEEK; - retval = si470x_set_register(radio, POWERCFG); - -done: - /* try again, if timed out */ - if ((retval == 0) && timed_out) - retval = -EAGAIN; - - return retval; -} - - -/* - * si470x_start - switch on radio - */ -static int si470x_start(struct si470x_device *radio) -{ - int retval; - - /* powercfg */ - radio->registers[POWERCFG] = - POWERCFG_DMUTE | POWERCFG_ENABLE | POWERCFG_RDSM; - retval = si470x_set_register(radio, POWERCFG); - if (retval < 0) - goto done; - - /* sysconfig 1 */ - radio->registers[SYSCONFIG1] = SYSCONFIG1_DE; - retval = si470x_set_register(radio, SYSCONFIG1); - if (retval < 0) - goto done; - - /* sysconfig 2 */ - radio->registers[SYSCONFIG2] = - (0x3f << 8) | /* SEEKTH */ - ((band << 6) & SYSCONFIG2_BAND) | /* BAND */ - ((space << 4) & SYSCONFIG2_SPACE) | /* SPACE */ - 15; /* VOLUME (max) */ - retval = si470x_set_register(radio, SYSCONFIG2); - if (retval < 0) - goto done; - - /* reset last channel */ - retval = si470x_set_chan(radio, - radio->registers[CHANNEL] & CHANNEL_CHAN); - -done: - return retval; -} - - -/* - * si470x_stop - switch off radio - */ -static int si470x_stop(struct si470x_device *radio) -{ - int retval; - - /* sysconfig 1 */ - radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS; - retval = si470x_set_register(radio, SYSCONFIG1); - if (retval < 0) - goto done; - - /* powercfg */ - radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; - /* POWERCFG_ENABLE has to automatically go low */ - radio->registers[POWERCFG] |= POWERCFG_ENABLE | POWERCFG_DISABLE; - retval = si470x_set_register(radio, POWERCFG); - -done: - return retval; -} - - -/* - * si470x_rds_on - switch on rds reception - */ -static int si470x_rds_on(struct si470x_device *radio) -{ - int retval; - - /* sysconfig 1 */ - mutex_lock(&radio->lock); - radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDS; - retval = si470x_set_register(radio, SYSCONFIG1); - if (retval < 0) - radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS; - mutex_unlock(&radio->lock); - - return retval; -} - - - -/************************************************************************** - * General Driver Functions - ENTIRE_REPORT - **************************************************************************/ - -/* - * si470x_get_all_registers - read entire registers - */ -static int si470x_get_all_registers(struct si470x_device *radio) -{ - unsigned char buf[ENTIRE_REPORT_SIZE]; - int retval; - unsigned char regnr; - - buf[0] = ENTIRE_REPORT; - - retval = si470x_get_report(radio, (void *) &buf, sizeof(buf)); - - if (retval >= 0) - for (regnr = 0; regnr < RADIO_REGISTER_NUM; regnr++) - radio->registers[regnr] = get_unaligned_be16( - &buf[regnr * RADIO_REGISTER_SIZE + 1]); - - return (retval < 0) ? -EINVAL : 0; -} - - - -/************************************************************************** - * General Driver Functions - LED_REPORT - **************************************************************************/ - -/* - * si470x_set_led_state - sets the led state - */ -static int si470x_set_led_state(struct si470x_device *radio, - unsigned char led_state) -{ - unsigned char buf[LED_REPORT_SIZE]; - int retval; - - buf[0] = LED_REPORT; - buf[1] = LED_COMMAND; - buf[2] = led_state; - - retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); - - return (retval < 0) ? -EINVAL : 0; -} - - - -/************************************************************************** - * General Driver Functions - SCRATCH_REPORT - **************************************************************************/ - -/* - * si470x_get_scratch_versions - gets the scratch page and version infos - */ -static int si470x_get_scratch_page_versions(struct si470x_device *radio) -{ - unsigned char buf[SCRATCH_REPORT_SIZE]; - int retval; - - buf[0] = SCRATCH_REPORT; - - retval = si470x_get_report(radio, (void *) &buf, sizeof(buf)); - - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME ": si470x_get_scratch: " - "si470x_get_report returned %d\n", retval); - else { - radio->software_version = buf[1]; - radio->hardware_version = buf[2]; - } - - return (retval < 0) ? -EINVAL : 0; -} - - - -/************************************************************************** - * RDS Driver Functions - **************************************************************************/ - -/* - * si470x_int_in_callback - rds callback and processing function - * - * TODO: do we need to use mutex locks in some sections? - */ -static void si470x_int_in_callback(struct urb *urb) -{ - struct si470x_device *radio = urb->context; - unsigned char buf[RDS_REPORT_SIZE]; - int retval; - unsigned char regnr; - unsigned char blocknum; - unsigned short bler; /* rds block errors */ - unsigned short rds; - unsigned char tmpbuf[3]; - - if (urb->status) { - if (urb->status == -ENOENT || - urb->status == -ECONNRESET || - urb->status == -ESHUTDOWN) { - return; - } else { - printk(KERN_WARNING DRIVER_NAME - ": non-zero urb status (%d)\n", urb->status); - goto resubmit; /* Maybe we can recover. */ - } - } - - /* safety checks */ - if (radio->disconnected) - return; - if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) - goto resubmit; - - if (urb->actual_length > 0) { - /* Update RDS registers with URB data */ - buf[0] = RDS_REPORT; - for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++) - radio->registers[STATUSRSSI + regnr] = - get_unaligned_be16(&radio->int_in_buffer[ - regnr * RADIO_REGISTER_SIZE + 1]); - /* get rds blocks */ - if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0) { - /* No RDS group ready, better luck next time */ - goto resubmit; - } - if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSS) == 0) { - /* RDS decoder not synchronized */ - goto resubmit; |