diff options
Diffstat (limited to 'drivers/media/platform/davinci/vpfe_capture.c')
| -rw-r--r-- | drivers/media/platform/davinci/vpfe_capture.c | 2080 |
1 files changed, 2080 insertions, 0 deletions
diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c new file mode 100644 index 00000000000..48052cbffc2 --- /dev/null +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -0,0 +1,2080 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Driver name : VPFE Capture driver + * VPFE Capture driver allows applications to capture and stream video + * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as + * TVP5146 or Raw Bayer RGB image data from an image sensor + * such as Microns' MT9T001, MT9T031 etc. + * + * These SoCs have, in common, a Video Processing Subsystem (VPSS) that + * consists of a Video Processing Front End (VPFE) for capturing + * video/raw image data and Video Processing Back End (VPBE) for displaying + * YUV data through an in-built analog encoder or Digital LCD port. This + * driver is for capture through VPFE. A typical EVM using these SoCs have + * following high level configuration. + * + * + * decoder(TVP5146/ YUV/ + * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) + * data input | | + * V | + * SDRAM | + * V + * Image Processor + * | + * V + * SDRAM + * The data flow happens from a decoder connected to the VPFE over a + * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface + * and to the input of VPFE through an optional MUX (if more inputs are + * to be interfaced on the EVM). The input data is first passed through + * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC + * does very little or no processing on YUV data and does pre-process Raw + * Bayer RGB data through modules such as Defect Pixel Correction (DFC) + * Color Space Conversion (CSC), data gain/offset etc. After this, data + * can be written to SDRAM or can be connected to the image processing + * block such as IPIPE (on DM355 only). + * + * Features supported + * - MMAP IO + * - Capture using TVP5146 over BT.656 + * - support for interfacing decoders using sub device model + * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV + * data capture to SDRAM. + * TODO list + * - Support multiple REQBUF after open + * - Support for de-allocating buffers through REQBUF + * - Support for Raw Bayer RGB capture + * - Support for chaining Image Processor + * - Support for static allocation of buffers + * - Support for USERPTR IO + * - Support for STREAMON before QBUF + * - Support for control ioctls + */ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <media/v4l2-common.h> +#include <linux/io.h> +#include <media/davinci/vpfe_capture.h> +#include "ccdc_hw_device.h" + +static int debug; +static u32 numbuffers = 3; +static u32 bufsize = (720 * 576 * 2); + +module_param(numbuffers, uint, S_IRUGO); +module_param(bufsize, uint, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); +MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/* standard information */ +struct vpfe_standard { + v4l2_std_id std_id; + unsigned int width; + unsigned int height; + struct v4l2_fract pixelaspect; + /* 0 - progressive, 1 - interlaced */ + int frame_format; +}; + +/* ccdc configuration */ +struct ccdc_config { + /* This make sure vpfe is probed and ready to go */ + int vpfe_probed; + /* name of ccdc device */ + char name[32]; +}; + +/* data structures */ +static struct vpfe_config_params config_params = { + .min_numbuffers = 3, + .numbuffers = 3, + .min_bufsize = 720 * 480 * 2, + .device_bufsize = 720 * 576 * 2, +}; + +/* ccdc device registered */ +static struct ccdc_hw_device *ccdc_dev; +/* lock for accessing ccdc information */ +static DEFINE_MUTEX(ccdc_lock); +/* ccdc configuration */ +static struct ccdc_config *ccdc_cfg; + +const struct vpfe_standard vpfe_standards[] = { + {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, + {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, +}; + +/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ +static const struct vpfe_pixel_format vpfe_pix_fmts[] = { + { + .fmtdesc = { + .index = 0, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit A-Law compr.", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 1, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb - 16bit", + .pixelformat = V4L2_PIX_FMT_SBGGR16, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 2, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit DPCM compr.", + .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 3, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 4, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 5, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Y/CbCr 4:2:0 - Semi planar", + .pixelformat = V4L2_PIX_FMT_NV12, + }, + .bpp = 1, + }, +}; + +/* + * vpfe_lookup_pix_format() + * lookup an entry in the vpfe pix format table based on pix_format + */ +static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { + if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat) + return &vpfe_pix_fmts[i]; + } + return NULL; +} + +/* + * vpfe_register_ccdc_device. CCDC module calls this to + * register with vpfe capture + */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) +{ + int ret = 0; + printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); + + BUG_ON(!dev->hw_ops.open); + BUG_ON(!dev->hw_ops.enable); + BUG_ON(!dev->hw_ops.set_hw_if_params); + BUG_ON(!dev->hw_ops.configure); + BUG_ON(!dev->hw_ops.set_buftype); + BUG_ON(!dev->hw_ops.get_buftype); + BUG_ON(!dev->hw_ops.enum_pix); + BUG_ON(!dev->hw_ops.set_frame_format); + BUG_ON(!dev->hw_ops.get_frame_format); + BUG_ON(!dev->hw_ops.get_pixel_format); + BUG_ON(!dev->hw_ops.set_pixel_format); + BUG_ON(!dev->hw_ops.set_image_window); + BUG_ON(!dev->hw_ops.get_image_window); + BUG_ON(!dev->hw_ops.get_line_length); + BUG_ON(!dev->hw_ops.getfid); + + mutex_lock(&ccdc_lock); + if (NULL == ccdc_cfg) { + /* + * TODO. Will this ever happen? if so, we need to fix it. + * Proabably we need to add the request to a linked list and + * walk through it during vpfe probe + */ + printk(KERN_ERR "vpfe capture not initialized\n"); + ret = -EFAULT; + goto unlock; + } + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + ret = -EINVAL; + goto unlock; + } + + if (ccdc_dev) { + printk(KERN_ERR "ccdc already registered\n"); + ret = -EINVAL; + goto unlock; + } + + ccdc_dev = dev; +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} +EXPORT_SYMBOL(vpfe_register_ccdc_device); + +/* + * vpfe_unregister_ccdc_device. CCDC module calls this to + * unregister with vpfe capture + */ +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) +{ + if (NULL == dev) { + printk(KERN_ERR "invalid ccdc device ptr\n"); + return; + } + + printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", + dev->name); + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + return; + } + + mutex_lock(&ccdc_lock); + ccdc_dev = NULL; + mutex_unlock(&ccdc_lock); + return; +} +EXPORT_SYMBOL(vpfe_unregister_ccdc_device); + +/* + * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings + */ +static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev, + struct v4l2_format *f) +{ + struct v4l2_rect image_win; + enum ccdc_buftype buf_type; + enum ccdc_frmfmt frm_fmt; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ccdc_dev->hw_ops.get_image_window(&image_win); + f->fmt.pix.width = image_win.width; + f->fmt.pix.height = image_win.height; + f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length(); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * + f->fmt.pix.height; + buf_type = ccdc_dev->hw_ops.get_buftype(); + f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format(); + frm_fmt = ccdc_dev->hw_ops.get_frame_format(); + if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + f->fmt.pix.field = V4L2_FIELD_NONE; + else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n"); + return -EINVAL; + } + } else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n"); + return -EINVAL; + } + return 0; +} + +/* + * vpfe_config_ccdc_image_format() + * For a pix format, configure ccdc to setup the capture + */ +static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; + int ret = 0; + + if (ccdc_dev->hw_ops.set_pixel_format( + vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "couldn't set pix format in ccdc\n"); + return -EINVAL; + } + /* configure the image window */ + ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); + + switch (vpfe_dev->fmt.fmt.pix.field) { + case V4L2_FIELD_INTERLACED: + /* do nothing, since it is default */ + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_INTERLEAVED); + break; + case V4L2_FIELD_NONE: + frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + /* buffer type only applicable for interlaced scan */ + break; + case V4L2_FIELD_SEQ_TB: + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_SEPARATED); + break; + default: + return -EINVAL; + } + + /* set the frame format */ + if (!ret) + ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); + return ret; +} +/* + * vpfe_config_image_format() + * For a given standard, this functions sets up the default + * pix format & crop values in the vpfe device and ccdc. It first + * starts with defaults based values from the standard table. + * It then checks if sub device support g_mbus_fmt and then override the + * values based on that.Sets crop values to match with scan resolution + * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the + * values in ccdc + */ +static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, + const v4l2_std_id *std_id) +{ + struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; + struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { + if (vpfe_standards[i].std_id & *std_id) { + vpfe_dev->std_info.active_pixels = + vpfe_standards[i].width; + vpfe_dev->std_info.active_lines = + vpfe_standards[i].height; + vpfe_dev->std_info.frame_format = + vpfe_standards[i].frame_format; + vpfe_dev->std_index = i; + break; + } + } + + if (i == ARRAY_SIZE(vpfe_standards)) { + v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); + return -EINVAL; + } + + vpfe_dev->crop.top = 0; + vpfe_dev->crop.left = 0; + vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; + vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; + pix->width = vpfe_dev->crop.width; + pix->height = vpfe_dev->crop.height; + + /* first field and frame format based on standard frame format */ + if (vpfe_dev->std_info.frame_format) { + pix->field = V4L2_FIELD_INTERLACED; + /* assume V4L2_PIX_FMT_UYVY as default */ + pix->pixelformat = V4L2_PIX_FMT_UYVY; + v4l2_fill_mbus_format(&mbus_fmt, pix, + V4L2_MBUS_FMT_YUYV10_2X10); + } else { + pix->field = V4L2_FIELD_NONE; + /* assume V4L2_PIX_FMT_SBGGR8 */ + pix->pixelformat = V4L2_PIX_FMT_SBGGR8; + v4l2_fill_mbus_format(&mbus_fmt, pix, + V4L2_MBUS_FMT_SBGGR8_1X8); + } + + /* if sub device supports g_mbus_fmt, override the defaults */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt); + + if (ret && ret != -ENOIOCTLCMD) { + v4l2_err(&vpfe_dev->v4l2_dev, + "error in getting g_mbus_fmt from sub device\n"); + return ret; + } + v4l2_fill_pix_format(pix, &mbus_fmt); + pix->bytesperline = pix->width * 2; + pix->sizeimage = pix->bytesperline * pix->height; + + /* Sets the values in CCDC */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + if (ret) + return ret; + + /* Update the values of sizeimage and bytesperline */ + if (!ret) { + pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); + pix->sizeimage = pix->bytesperline * pix->height; + } + return ret; +} + +static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) +{ + int ret = 0; + + /* set first input of current subdevice as the current input */ + vpfe_dev->current_input = 0; + + /* set default standard */ + vpfe_dev->std_index = 0; + + /* Configure the default format information */ + ret = vpfe_config_image_format(vpfe_dev, + &vpfe_standards[vpfe_dev->std_index].std_id); + if (ret) + return ret; + + /* now open the ccdc device to initialize it */ + mutex_lock(&ccdc_lock); + if (NULL == ccdc_dev) { + v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); + ret = -ENODEV; + goto unlock; + } + + if (!try_module_get(ccdc_dev->owner)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); + ret = -ENODEV; + goto unlock; + } + ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); + if (!ret) + vpfe_dev->initialized = 1; + + /* Clear all VPFE/CCDC interrupts */ + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(-1); + +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} + +/* + * vpfe_open : It creates object of file handle structure and + * stores it in private_data member of filepointer + */ +static int vpfe_open(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); + + if (!vpfe_dev->cfg->num_subdevs) { + v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); + return -ENODEV; + } + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); + if (NULL == fh) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + /* store pointer to fh in private_data member of file */ + file->private_data = fh; + fh->vpfe_dev = vpfe_dev; + mutex_lock(&vpfe_dev->lock); + /* If decoder is not initialized. initialize it */ + if (!vpfe_dev->initialized) { + if (vpfe_initialize_device(vpfe_dev)) { + mutex_unlock(&vpfe_dev->lock); + return -ENODEV; + } + } + /* Increment device usrs counter */ + vpfe_dev->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&vpfe_dev->prio, &fh->prio); + mutex_unlock(&vpfe_dev->lock); + return 0; +} + +static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + list_del(&vpfe_dev->next_frm->queue); + vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(vpfe_dev->next_frm); + + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + addr += vpfe_dev->field_off; + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) +{ + struct timeval timevalue; + + do_gettimeofday(&timevalue); + vpfe_dev->cur_frm->ts = timevalue; + vpfe_dev->cur_frm->state = VIDEOBUF_DONE; + vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; + wake_up_interruptible(&vpfe_dev->cur_frm->done); + vpfe_dev->cur_frm = vpfe_dev->next_frm; +} + +/* ISR for VINT0*/ +static irqreturn_t vpfe_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + enum v4l2_field field; + int fid; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); + field = vpfe_dev->fmt.fmt.pix.field; + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) + goto clear_intr; + + /* only for 6446 this will be applicable */ + if (NULL != ccdc_dev->hw_ops.reset) + ccdc_dev->hw_ops.reset(); + + if (field == V4L2_FIELD_NONE) { + /* handle progressive frame capture */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "frame format is progressive...\n"); + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + goto clear_intr; + } + + /* interlaced or TB capture check which field we are in hardware */ + fid = ccdc_dev->hw_ops.getfid(); + + /* switch the software maintained field id */ + vpfe_dev->field_id ^= 1; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", + fid, vpfe_dev->field_id); + if (fid == vpfe_dev->field_id) { + /* we are in-sync here,continue */ + if (fid == 0) { + /* + * One frame is just being captured. If the next frame + * is available, release the current frame and move on + */ + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + /* + * based on whether the two fields are stored + * interleavely or separately in memory, reconfigure + * the CCDC memory address + */ + if (field == V4L2_FIELD_SEQ_TB) { + vpfe_schedule_bottom_field(vpfe_dev); + } + goto clear_intr; + } + /* + * if one field is just being captured configure + * the next frame get the next frame from the empty + * queue if no frame is available hold on to the + * current buffer + */ + spin_lock(&vpfe_dev->dma_queue_lock); + if (!list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + } else if (fid == 0) { + /* + * out of sync. Recover from any hardware out-of-sync. + * May loose one frame + */ + vpfe_dev->field_id = fid; + } +clear_intr: + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +/* vdint1_isr - isr handler for VINT1 interrupt */ +static irqreturn_t vdint1_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) { + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + return IRQ_HANDLED; + } + + spin_lock(&vpfe_dev->dma_queue_lock); + if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && + !list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); +} + +static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { + return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, + IRQF_DISABLED, "vpfe_capture1", + vpfe_dev); + } + return 0; +} + +/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ +static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + vpfe_dev->started = 0; + ccdc_dev->hw_ops.enable(0); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(0); +} + +/* + * vpfe_release : This function deletes buffer queue, frees the + * buffers and the vpfe file handle + */ +static int vpfe_release(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); + + /* Get the device lock */ + mutex_lock(&vpfe_dev->lock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + if (vpfe_dev->started) { + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, + video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, + "stream off failed in subdev\n"); + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + videobuf_streamoff(&vpfe_dev->buffer_queue); + } + vpfe_dev->io_usrs = 0; + vpfe_dev->numbuffers = config_params.numbuffers; + } + + /* Decrement device usrs counter */ + vpfe_dev->usrs--; + /* Close the priority */ + v4l2_prio_close(&vpfe_dev->prio, fh->prio); + /* If this is the last file handle */ + if (!vpfe_dev->usrs) { + vpfe_dev->initialized = 0; + if (ccdc_dev->hw_ops.close) + ccdc_dev->hw_ops.close(vpfe_dev->pdev); + module_put(ccdc_dev->owner); + } + mutex_unlock(&vpfe_dev->lock); + file->private_data = NULL; + /* Free memory allocated to file handle object */ + kfree(fh); + return 0; +} + +/* + * vpfe_mmap : It is used to map kernel space buffers + * into user spaces + */ +static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* Get the device object and file handle object */ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); + + return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); +} + +/* + * vpfe_poll: It is used for select/poll system call + */ +static unsigned int vpfe_poll(struct file *file, poll_table *wait) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); + + if (vpfe_dev->started) + return videobuf_poll_stream(file, + &vpfe_dev->buffer_queue, wait); + return 0; +} + +/* vpfe capture driver file operations */ +static const struct v4l2_file_operations vpfe_fops = { + .owner = THIS_MODULE, + .open = vpfe_open, + .release = vpfe_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpfe_mmap, + .poll = vpfe_poll +}; + +/* + * vpfe_check_format() + * This function adjust the input pixel format as per hardware + * capabilities and update the same in pixfmt. + * Following algorithm used :- + * + * If given pixformat is not in the vpfe list of pix formats or not + * supported by the hardware, current value of pixformat in the device + * is used + * If given field is not supported, then current field is used. If field + * is different from current, then it is matched with that from sub device. + * Minimum height is 2 lines for interlaced or tb field and 1 line for + * progressive. Maximum height is clamped to active active lines of scan + * Minimum width is 32 bytes in memory and width is clamped to active + * pixels of scan. + * bytesperline is a multiple of 32. + */ +static const struct vpfe_pixel_format * + vpfe_check_format(struct vpfe_device *vpfe_dev, + struct v4l2_pix_format *pixfmt) +{ + u32 min_height = 1, min_width = 32, max_width, max_height; + const struct vpfe_pixel_format *vpfe_pix_fmt; + u32 pix; + int temp, found; + + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + if (NULL == vpfe_pix_fmt) { + /* + * use current pixel format in the vpfe device. We + * will find this pix format in the table + */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check if hw supports it */ + temp = 0; + found = 0; + while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { + if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) { + found = 1; + break; + } + temp++; + } + + if (!found) { + /* use current pixel format */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + /* + * Since this is currently used in the vpfe device, we + * will find this pix format in the table + */ + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check what field format is supported */ + if (pixfmt->field == V4L2_FIELD_ANY) { + /* if field is any, use current value as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + } + + /* + * if field is not same as current field in the vpfe device + * try matching the field with the sub device field + */ + if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { + /* + * If field value is not in the supported fields, use current + * field used in the device as default + */ + switch (pixfmt->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + /* if sub device is supporting progressive, use that */ + if (!vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_NONE: + if (vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_INTERLACED; + break; + + default: + /* use current field as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + break; + } + } + + /* Now adjust image resolutions supported */ + if (pixfmt->field == V4L2_FIELD_INTERLACED || + pixfmt->field == V4L2_FIELD_SEQ_TB) + min_height = 2; + + max_width = vpfe_dev->std_info.active_pixels; + max_height = vpfe_dev->std_info.active_lines; + min_width /= vpfe_pix_fmt->bpp; + + v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); + + pixfmt->width = clamp((pixfmt->width), min_width, max_width); + pixfmt->height = clamp((pixfmt->height), min_height, max_height); + + /* If interlaced, adjust height to be a multiple of 2 */ + if (pixfmt->field == V4L2_FIELD_INTERLACED) + pixfmt->height &= (~1); + /* + * recalculate bytesperline and sizeimage since width + * and height might have changed + */ + pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) + & ~31); + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = + pixfmt->bytesperline * pixfmt->height + + ((pixfmt->bytesperline * pixfmt->height) >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" + " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, + pixfmt->bytesperline, pixfmt->sizeimage); + return vpfe_pix_fmt; +} + +static int vpfe_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); + + cap->version = VPFE_CAPTURE_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); + strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); + /* Fill in the information about format */ + *fmt = vpfe_dev->fmt; + return ret; +} + +static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmt; + int temp_index; + u32 pix; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); + + if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) + return -EINVAL; + + /* Fill in the information about format */ + pix_fmt = vpfe_lookup_pix_format(pix); + if (NULL != pix_fmt) { + temp_index = fmt->index; + *fmt = pix_fmt->fmtdesc; + fmt->index = temp_index; + return 0; + } + return -EINVAL; +} + +static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); + + /* If streaming is started, return error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Check for valid frame format */ + pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); + + if (NULL == pix_fmts) + return -EINVAL; + + /* store the pixel format in the device object */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* First detach any IRQ if currently attached */ + vpfe_detach_irq(vpfe_dev); + vpfe_dev->fmt = *fmt; + /* set image capture parameters in the ccdc */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); + + pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); + if (NULL == pix_fmts) + return -EINVAL; + return 0; +} + +/* + * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a + * given app input index + */ +static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, + int *subdev_index, + int *subdev_input_index, + int app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (app_input_index < (j + sdinfo->num_inputs)) { + *subdev_index = i; + *subdev_input_index = app_input_index - j; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +/* + * vpfe_get_app_input - Get app input index for a given subdev input index + * driver stores the input index of the current sub device and translate it + * when application request the current input + */ +static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, + int *app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { + if (vpfe_dev->current_input >= sdinfo->num_inputs) + return -1; + *app_input_index = j + vpfe_dev->current_input; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +static int vpfe_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev, index ; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev, + &index, + inp->index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" + " for the subdev\n"); + return -EINVAL; + } + sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; + memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); + return 0; +} + +static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); + + return vpfe_get_app_input_index(vpfe_dev, index); +} + + +static int vpfe_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev_index, inp_index; + struct vpfe_route *route; + u32 input = 0, output = 0; + int ret = -EINVAL; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* + * If streaming is started return device busy + * error |