aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/pci/pluto2
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/pci/pluto2')
-rw-r--r--drivers/media/pci/pluto2/Kconfig15
-rw-r--r--drivers/media/pci/pluto2/Makefile3
-rw-r--r--drivers/media/pci/pluto2/pluto2.c815
3 files changed, 833 insertions, 0 deletions
diff --git a/drivers/media/pci/pluto2/Kconfig b/drivers/media/pci/pluto2/Kconfig
new file mode 100644
index 00000000000..7d8e6e87bdb
--- /dev/null
+++ b/drivers/media/pci/pluto2/Kconfig
@@ -0,0 +1,15 @@
+config DVB_PLUTO2
+ tristate "Pluto2 cards"
+ depends on DVB_CORE && PCI && I2C
+ select I2C_ALGOBIT
+ select DVB_TDA1004X
+ help
+ Support for PCI cards based on the Pluto2 FPGA like the Satelco
+ Easywatch Mobile Terrestrial DVB-T Receiver.
+
+ Since these cards have no MPEG decoder onboard, they transmit
+ only compressed MPEG data over the PCI bus, so you need
+ an external software decoder to watch TV on your computer.
+
+ Say Y or M if you own such a device and want to use it.
+
diff --git a/drivers/media/pci/pluto2/Makefile b/drivers/media/pci/pluto2/Makefile
new file mode 100644
index 00000000000..524bf841f42
--- /dev/null
+++ b/drivers/media/pci/pluto2/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
+
+ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/
diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c
new file mode 100644
index 00000000000..f148b19a206
--- /dev/null
+++ b/drivers/media/pci/pluto2/pluto2.c
@@ -0,0 +1,815 @@
+/*
+ * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
+ *
+ * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
+ *
+ * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
+ * by Dany Salman <salmandany@yahoo.fr>
+ * Copyright (c) 2004 TDF
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include "demux.h"
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+#include "dvbdev.h"
+#include "tda1004x.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define DRIVER_NAME "pluto2"
+
+#define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
+#define REG_PCAR 0x0020 /* PC address register */
+#define REG_TSCR 0x0024 /* TS ctrl & status */
+#define REG_MISC 0x0028 /* miscellaneous */
+#define REG_MMAC 0x002c /* MSB MAC address */
+#define REG_IMAC 0x0030 /* ISB MAC address */
+#define REG_LMAC 0x0034 /* LSB MAC address */
+#define REG_SPID 0x0038 /* SPI data */
+#define REG_SLCS 0x003c /* serial links ctrl/status */
+
+#define PID0_NOFIL (0x0001 << 16)
+#define PIDn_ENP (0x0001 << 15)
+#define PID0_END (0x0001 << 14)
+#define PID0_AFIL (0x0001 << 13)
+#define PIDn_PID (0x1fff << 0)
+
+#define TSCR_NBPACKETS (0x00ff << 24)
+#define TSCR_DEM (0x0001 << 17)
+#define TSCR_DE (0x0001 << 16)
+#define TSCR_RSTN (0x0001 << 15)
+#define TSCR_MSKO (0x0001 << 14)
+#define TSCR_MSKA (0x0001 << 13)
+#define TSCR_MSKL (0x0001 << 12)
+#define TSCR_OVR (0x0001 << 11)
+#define TSCR_AFUL (0x0001 << 10)
+#define TSCR_LOCK (0x0001 << 9)
+#define TSCR_IACK (0x0001 << 8)
+#define TSCR_ADEF (0x007f << 0)
+
+#define MISC_DVR (0x0fff << 4)
+#define MISC_ALED (0x0001 << 3)
+#define MISC_FRST (0x0001 << 2)
+#define MISC_LED1 (0x0001 << 1)
+#define MISC_LED0 (0x0001 << 0)
+
+#define SPID_SPIDR (0x00ff << 0)
+
+#define SLCS_SCL (0x0001 << 7)
+#define SLCS_SDA (0x0001 << 6)
+#define SLCS_CSN (0x0001 << 2)
+#define SLCS_OVR (0x0001 << 1)
+#define SLCS_SWC (0x0001 << 0)
+
+#define TS_DMA_PACKETS (8)
+#define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
+
+#define I2C_ADDR_TDA10046 0x10
+#define I2C_ADDR_TUA6034 0xc2
+#define NHWFILTERS 8
+
+struct pluto {
+ /* pci */
+ struct pci_dev *pdev;
+ u8 __iomem *io_mem;
+
+ /* dvb */
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ struct dmxdev dmxdev;
+ struct dvb_adapter dvb_adapter;
+ struct dvb_demux demux;
+ struct dvb_frontend *fe;
+ struct dvb_net dvbnet;
+ unsigned int full_ts_users;
+ unsigned int users;
+
+ /* i2c */
+ struct i2c_algo_bit_data i2c_bit;
+ struct i2c_adapter i2c_adap;
+ unsigned int i2cbug;
+
+ /* irq */
+ unsigned int overflow;
+ unsigned int dead;
+
+ /* dma */
+ dma_addr_t dma_addr;
+ u8 dma_buf[TS_DMA_BYTES];
+ u8 dummy[4096];
+};
+
+static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
+{
+ return container_of(feed->demux, struct pluto, demux);
+}
+
+static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
+{
+ return container_of(fe->dvb, struct pluto, dvb_adapter);
+}
+
+static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
+{
+ return readl(&pluto->io_mem[reg]);
+}
+
+static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
+{
+ writel(val, &pluto->io_mem[reg]);
+}
+
+static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
+{
+ u32 val = readl(&pluto->io_mem[reg]);
+ val &= ~mask;
+ val |= bits;
+ writel(val, &pluto->io_mem[reg]);
+}
+
+static void pluto_write_tscr(struct pluto *pluto, u32 val)
+{
+ /* set the number of packets */
+ val &= ~TSCR_ADEF;
+ val |= TS_DMA_PACKETS / 2;
+
+ pluto_writereg(pluto, REG_TSCR, val);
+}
+
+static void pluto_setsda(void *data, int state)
+{
+ struct pluto *pluto = data;
+
+ if (state)
+ pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
+ else
+ pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
+}
+
+static void pluto_setscl(void *data, int state)
+{
+ struct pluto *pluto = data;
+
+ if (state)
+ pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
+ else
+ pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
+
+ /* try to detect i2c_inb() to workaround hardware bug:
+ * reset SDA to high after SCL has been set to low */
+ if ((state) && (pluto->i2cbug == 0)) {
+ pluto->i2cbug = 1;
+ } else {
+ if ((!state) && (pluto->i2cbug == 1))
+ pluto_setsda(pluto, 1);
+ pluto->i2cbug = 0;
+ }
+}
+
+static int pluto_getsda(void *data)
+{
+ struct pluto *pluto = data;
+
+ return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
+}
+
+static int pluto_getscl(void *data)
+{
+ struct pluto *pluto = data;
+
+ return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
+}
+
+static void pluto_reset_frontend(struct pluto *pluto, int reenable)
+{
+ u32 val = pluto_readreg(pluto, REG_MISC);
+
+ if (val & MISC_FRST) {
+ val &= ~MISC_FRST;
+ pluto_writereg(pluto, REG_MISC, val);
+ }
+ if (reenable) {
+ val |= MISC_FRST;
+ pluto_writereg(pluto, REG_MISC, val);
+ }
+}
+
+static void pluto_reset_ts(struct pluto *pluto, int reenable)
+{
+ u32 val = pluto_readreg(pluto, REG_TSCR);
+
+ if (val & TSCR_RSTN) {
+ val &= ~TSCR_RSTN;
+ pluto_write_tscr(pluto, val);
+ }
+ if (reenable) {
+ val |= TSCR_RSTN;
+ pluto_write_tscr(pluto, val);
+ }
+}
+
+static void pluto_set_dma_addr(struct pluto *pluto)
+{
+ pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
+}
+
+static int __devinit pluto_dma_map(struct pluto *pluto)
+{
+ pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
+ TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+
+ return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
+}
+
+static void pluto_dma_unmap(struct pluto *pluto)
+{
+ pci_unmap_single(pluto->pdev, pluto->dma_addr,
+ TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+}
+
+static int pluto_start_feed(struct dvb_demux_feed *f)
+{
+ struct pluto *pluto = feed_to_pluto(f);
+
+ /* enable PID filtering */
+ if (pluto->users++ == 0)
+ pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
+
+ if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
+ pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
+ else if (pluto->full_ts_users++ == 0)
+ pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
+
+ return 0;
+}
+
+static int pluto_stop_feed(struct dvb_demux_feed *f)
+{
+ struct pluto *pluto = feed_to_pluto(f);
+
+ /* disable PID filtering */
+ if (--pluto->users == 0)
+ pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
+
+ if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
+ pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
+ else if (--pluto->full_ts_users == 0)
+ pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
+
+ return 0;
+}
+
+static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
+{
+ /* synchronize the DMA transfer with the CPU
+ * first so that we see updated contents. */
+ pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
+ TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+
+ /* Workaround for broken hardware:
+ * [1] On startup NBPACKETS seems to contain an uninitialized value,
+ * but no packets have been transferred.
+ * [2] Sometimes (actually very often) NBPACKETS stays at zero
+ * although one packet has been transferred.
+ * [3] Sometimes (actually rarely), the card gets into an erroneous
+ * mode where it continuously generates interrupts, claiming it
+ * has received nbpackets>TS_DMA_PACKETS packets, but no packet
+ * has been transferred. Only a reset seems to solve this
+ */
+ if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
+ unsigned int i = 0;
+ while (pluto->dma_buf[i] == 0x47)
+ i += 188;
+ nbpackets = i / 188;
+ if (i == 0) {
+ pluto_reset_ts(pluto, 1);
+ dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
+ }
+ }
+
+ dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
+
+ /* clear the dma buffer. this is needed to be able to identify
+ * new valid ts packets above */
+ memset(pluto->dma_buf, 0, nbpackets * 188);
+
+ /* reset the dma address */
+ pluto_set_dma_addr(pluto);
+
+ /* sync the buffer and give it back to the card */
+ pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
+ TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
+}
+
+static irqreturn_t pluto_irq(int irq, void *dev_id)
+{
+ struct pluto *pluto = dev_id;
+ u32 tscr;
+
+ /* check whether an interrupt occurred on this device */
+ tscr = pluto_readreg(pluto, REG_TSCR);
+ if (!(tscr & (TSCR_DE | TSCR_OVR)))
+ return IRQ_NONE;
+
+ if (tscr == 0xffffffff) {
+ if (pluto->dead == 0)
+ dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
+ /* It's dead Jim */
+ pluto->dead = 1;
+ return IRQ_HANDLED;
+ }
+
+ /* dma end interrupt */
+ if (tscr & TSCR_DE) {
+ pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
+ /* overflow interrupt */
+ if (tscr & TSCR_OVR)
+ pluto->overflow++;
+ if (pluto->overflow) {
+ dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
+ pluto->overflow);
+ pluto_reset_ts(pluto, 1);
+ pluto->overflow = 0;
+ }
+ } else if (tscr & TSCR_OVR) {
+ pluto->overflow++;
+ }
+
+ /* ACK the interrupt */
+ pluto_write_tscr(pluto, tscr | TSCR_IACK);
+
+ return IRQ_HANDLED;
+}
+
+static void __devinit pluto_enable_irqs(struct pluto *pluto)
+{
+ u32 val = pluto_readreg(pluto, REG_TSCR);
+
+ /* disable AFUL and LOCK interrupts */
+ val |= (TSCR_MSKA | TSCR_MSKL);
+ /* enable DMA and OVERFLOW interrupts */
+ val &= ~(TSCR_DEM | TSCR_MSKO);
+ /* clear pending interrupts */
+ val |= TSCR_IACK;
+
+ pluto_write_tscr(pluto, val);
+}
+
+static void pluto_disable_irqs(struct pluto *pluto)
+{
+ u32 val = pluto_readreg(pluto, REG_TSCR);
+
+ /* disable all interrupts */
+ val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
+ /* clear pending interrupts */
+ val |= TSCR_IACK;
+
+ pluto_write_tscr(pluto, val);
+}
+
+static int __devinit pluto_hw_init(struct pluto *pluto)
+{
+ pluto_reset_frontend(pluto, 1);
+
+ /* set automatic LED control by FPGA */
+ pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
+
+ /* set data endianess */
+#ifdef __LITTLE_ENDIAN
+ pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
+#else
+ pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
+#endif
+ /* map DMA and set address */
+ pluto_dma_map(pluto);
+ pluto_set_dma_addr(pluto);
+
+ /* enable interrupts */
+ pluto_enable_irqs(pluto);
+
+ /* reset TS logic */
+ pluto_reset_ts(pluto, 1);
+
+ return 0;
+}
+
+static void pluto_hw_exit(struct pluto *pluto)
+{
+ /* disable interrupts */
+ pluto_disable_irqs(pluto);
+
+ pluto_reset_ts(pluto, 0);
+
+ /* LED: disable automatic control, enable yellow, disable green */
+ pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
+
+ /* unmap DMA */
+ pluto_dma_unmap(pluto);
+
+ pluto_reset_frontend(pluto, 0);
+}
+
+static inline u32 divide(u32 numerator, u32 denominator)
+{
+ if (denominator == 0)
+ return ~0;
+
+ return DIV_ROUND_CLOSEST(numerator, denominator);
+}
+
+/* LG Innotek TDTE-E001P (Infineon TUA6034) */
+static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct pluto *pluto = frontend_to_pluto(fe);
+ struct i2c_msg msg;
+ int ret;
+ u8 buf[4];
+ u32 div;
+
+ // Fref = 166.667 Hz
+ // Fref * 3 = 500.000 Hz
+ // IF = 36166667
+ // IF / Fref = 217
+ //div = divide(p->frequency + 36166667, 166667);
+ div = divide(p->frequency * 3, 500000) + 217;
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = (div >> 0) & 0xff;
+
+ if (p->frequency < 611000000)
+ buf[2] = 0xb4;
+ else if (p->frequency < 811000000)
+ buf[2] = 0xbc;
+ else
+ buf[2] = 0xf4;
+
+ // VHF: 174-230 MHz
+ // center: 350 MHz
+ // UHF: 470-862 MHz
+ if (p->frequency < 350000000)
+ buf[3] = 0x02;
+ else
+ buf[3] = 0x04;
+
+ if (p->bandwidth_hz == 8000000)
+ buf[3] |= 0x08;
+
+ msg.addr = I2C_ADDR_TUA6034 >> 1;
+ msg.flags = 0;
+ msg.buf = buf;
+ msg.len = sizeof(buf);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
+ if (ret < 0)
+ return ret;
+ else if (ret == 0)
+ return -EREMOTEIO;
+
+ return 0;
+}
+
+static int pluto2_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct pluto *pluto = frontend_to_pluto(fe);
+
+ return request_firmware(fw, name, &pluto->pdev->dev);
+}
+
+static struct tda1004x_config pluto2_fe_config __devinitdata = {
+ .demod_address = I2C_ADDR_TDA10046 >> 1,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
+ .request_firmware = pluto2_request_firmware,
+};
+
+static int __devinit frontend_init(struct pluto *pluto)
+{
+ int ret;
+
+ pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
+ if (!pluto->fe) {
+ dev_err(&pluto->pdev->dev, "could not attach frontend\n");
+ return -ENODEV;
+ }
+ pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
+
+ ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
+ if (ret < 0) {
+ if (pluto->fe->ops.release)
+ pluto->fe->ops.release(pluto->fe);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void __devinit pluto_read_rev(struct pluto *pluto)
+{
+ u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
+ dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
+ (val >> 12) & 0x0f, (val >> 4) & 0xff);
+}
+
+static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
+{
+ u32 val = pluto_readreg(pluto, REG_MMAC);
+ mac[0] = (val >> 8) & 0xff;
+ mac[1] = (val >> 0) & 0xff;
+
+ val = pluto_readreg(pluto, REG_IMAC);
+ mac[2] = (val >> 8) & 0xff;
+ mac[3] = (val >> 0) & 0xff;
+
+ val = pluto_readreg(pluto, REG_LMAC);
+ mac[4] = (val >> 8) & 0xff;
+ mac[5] = (val >> 0) & 0xff;
+
+ dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
+}
+
+static int __devinit pluto_read_serial(struct pluto *pluto)
+{
+ struct pci_dev *pdev = pluto->pdev;
+ unsigned int i, j;
+ u8 __iomem *cis;
+
+ cis = pci_iomap(pdev, 1, 0);
+ if (!cis)
+ return -EIO;
+
+ dev_info(&pdev->dev, "S/N ");
+
+ for (i = 0xe0; i < 0x100; i += 4) {
+ u32 val = readl(&cis[i]);
+ for (j = 0; j < 32; j += 8) {
+ if ((val & 0xff) == 0xff)
+ goto out;
+ printk("%c", val & 0xff);
+ val >>= 8;
+ }
+ }
+out:
+ printk("\n");
+ pci_iounmap(pdev, cis);
+
+ return 0;
+}
+
+static int __devinit pluto2_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct pluto *pluto;
+ struct dvb_adapter *dvb_adapter;
+ struct dvb_demux *dvbdemux;
+ struct dmx_demux *dmx;
+ int ret = -ENOMEM;
+
+ pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
+ if (!pluto)
+ goto out;
+
+ pluto->pdev = pdev;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ goto err_kfree;
+
+ /* enable interrupts */
+ pci_write_config_dword(pdev, 0x6c, 0x8000);
+
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret < 0)
+ goto err_pci_disable_device;
+
+ pci_set_master(pdev);
+
+ ret = pci_request_regions(pdev, DRIVER_NAME);
+ if (ret < 0)
+ goto err_pci_disable_device;
+
+ pluto->io_mem = pci_iomap(pdev, 0, 0x40);
+ if (!pluto->io_mem) {
+ ret = -EIO;
+ goto err_pci_release_regions;
+ }
+
+ pci_set_drvdata(pdev, pluto);
+
+ ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
+ if (ret < 0)
+ goto err_pci_iounmap;
+
+ ret = pluto_hw_init(pluto);
+ if (ret < 0)
+ goto err_free_irq;
+
+ /* i2c */
+ i2c_set_adapdata(&pluto->i2c_adap, pluto);
+ strcpy(pluto->i2c_adap.name, DRIVER_NAME);
+ pluto->i2c_adap.owner = THIS_MODULE;
+ pluto->i2c_adap.dev.parent = &pdev->dev;
+ pluto->i2c_adap.algo_data = &pluto->i2c_bit;
+ pluto->i2c_bit.data = pluto;
+ pluto->i2c_bit.setsda = pluto_setsda;
+ pluto->i2c_bit.setscl = pluto_setscl;
+ pluto->i2c_bit.getsda = pluto_getsda;
+ pluto->i2c_bit.getscl = pluto_getscl;
+ pluto->i2c_bit.udelay = 10;
+ pluto->i2c_bit.timeout = 10;
+
+ /* Raise SCL and SDA */
+ pluto_setsda(pluto, 1);
+ pluto_setscl(pluto, 1);
+
+ ret = i2c_bit_add_bus(&pluto->i2c_adap);
+ if (ret < 0)
+ goto err_pluto_hw_exit;
+
+ /* dvb */
+ ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
+ THIS_MODULE, &pdev->dev, adapter_nr);
+ if (ret < 0)
+ goto err_i2c_del_adapter;
+
+ dvb_adapter = &pluto->dvb_adapter;
+
+ pluto_read_rev(pluto);
+ pluto_read_serial(pluto);
+ pluto_read_mac(pluto, dvb_adapter->proposed_mac);
+
+ dvbdemux = &pluto->demux;
+ dvbdemux->filternum = 256;
+ dvbdemux->feednum = 256;
+ dvbdemux->start_feed = pluto_start_feed;
+ dvbdemux->stop_feed = pluto_stop_feed;
+ dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+ ret = dvb_dmx_init(dvbdemux);
+ if (ret < 0)
+ goto err_dvb_unregister_adapter;
+
+ dmx = &dvbdemux->dmx;
+
+ pluto->hw_frontend.source = DMX_FRONTEND_0;
+ pluto->mem_frontend.source = DMX_MEMORY_FE;
+ pluto->dmxdev.filternum = NHWFILTERS;
+ pluto->dmxdev.demux = dmx;
+
+ ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
+ if (ret < 0)
+ goto err_dvb_dmx_release;
+
+ ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
+ if (ret < 0)
+ goto err_dvb_dmxdev_release;
+
+ ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
+ if (ret < 0)
+ goto err_remove_hw_frontend;
+
+ ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
+ if (ret < 0)
+ goto err_remove_mem_frontend;
+
+ ret = frontend_init(pluto);
+ if (ret < 0)
+ goto err_disconnect_frontend;
+
+ dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
+out:
+ return ret;
+
+err_disconnect_frontend:
+ dmx->disconnect_frontend(dmx);
+err_remove_mem_frontend:
+ dmx->remove_frontend(dmx, &pluto->mem_frontend);
+err_remove_hw_frontend:
+ dmx->remove_frontend(dmx, &pluto->hw_frontend);
+err_dvb_dmxdev_release:
+ dvb_dmxdev_release(&pluto->dmxdev);
+err_dvb_dmx_release:
+ dvb_dmx_release(dvbdemux);
+err_dvb_unregister_adapter:
+ dvb_unregister_adapter(dvb_adapter);
+err_i2c_del_adapter:
+ i2c_del_adapter(&pluto->i2c_adap);
+err_pluto_hw_exit:
+ pluto_hw_exit(pluto);
+err_free_irq:
+ free_irq(pdev->irq, pluto);
+err_pci_iounmap:
+ pci_iounmap(pdev, pluto->io_mem);
+err_pci_release_regions:
+ pci_release_regions(pdev);
+err_pci_disable_device:
+ pci_disable_device(pdev);
+err_kfree:
+ pci_set_drvdata(pdev, NULL);
+ kfree(pluto);
+ goto out;
+}
+
+static void __devexit pluto2_remove(struct pci_dev *pdev)
+{
+ struct pluto *pluto = pci_get_drvdata(pdev);
+ struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
+ struct dvb_demux *dvbdemux = &pluto->demux;
+ struct dmx_demux *dmx = &dvbdemux->dmx;
+
+ dmx->close(dmx);
+ dvb_net_release(&pluto->dvbnet);
+ if (pluto->fe)
+ dvb_unregister_frontend(pluto->fe);
+
+ dmx->disconnect_frontend(dmx);
+ dmx->remove_frontend(dmx, &pluto->mem_frontend);
+ dmx->remove_frontend(dmx, &pluto->hw_frontend);
+ dvb_dmxdev_release(&pluto->dmxdev);
+ dvb_dmx_release(dvbdemux);
+ dvb_unregister_adapter(dvb_adapter);
+ i2c_del_adapter(&pluto->i2c_adap);
+ pluto_hw_exit(pluto);
+ free_irq(pdev->irq, pluto);
+ pci_iounmap(pdev, pluto->io_mem);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ kfree(pluto);
+}
+
+#ifndef PCI_VENDOR_ID_SCM
+#define PCI_VENDOR_ID_SCM 0x0432
+#endif
+#ifndef PCI_DEVICE_ID_PLUTO2
+#define PCI_DEVICE_ID_PLUTO2 0x0001
+#endif
+
+static struct pci_device_id pluto2_id_table[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_SCM,
+ .device = PCI_DEVICE_ID_PLUTO2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ }, {
+ /* empty */
+ },
+};
+
+MODULE_DEVICE_TABLE(pci, pluto2_id_table);
+
+static struct pci_driver pluto2_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pluto2_id_table,
+ .probe = pluto2_probe,
+ .remove = __devexit_p(pluto2_remove),
+};
+
+static int __init pluto2_init(void)
+{
+ return pci_register_driver(&pluto2_driver);
+}
+
+static void __exit pluto2_exit(void)
+{
+ pci_unregister_driver(&pluto2_driver);
+}
+
+module_init(pluto2_init);
+module_exit(pluto2_exit);
+
+MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
+MODULE_DESCRIPTION("Pluto2 driver");
+MODULE_LICENSE("GPL");