diff options
Diffstat (limited to 'drivers/media/i2c/Kconfig')
| -rw-r--r-- | drivers/media/i2c/Kconfig | 591 |
1 files changed, 591 insertions, 0 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig new file mode 100644 index 00000000000..24d78e28e49 --- /dev/null +++ b/drivers/media/i2c/Kconfig @@ -0,0 +1,591 @@ +# +# Generic video config states +# + +config VIDEO_BTCX + depends on PCI + tristate + +config VIDEO_TVEEPROM + tristate + depends on I2C + +# +# Multimedia Video device configuration +# + +if VIDEO_V4L2 + +config VIDEO_IR_I2C + tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT + depends on I2C && RC_CORE + default y + ---help--- + Most boards have an IR chip directly connected via GPIO. However, + some video boards have the IR connected via I2C bus. + + If your board doesn't have an I2C IR chip, you may disable this + option. + + In doubt, say Y. + +# +# Encoder / Decoder module configuration +# + +menu "Encoders, decoders, sensors and other helper chips" + visible if !MEDIA_SUBDRV_AUTOSELECT + +comment "Audio decoders, processors and mixers" + +config VIDEO_TVAUDIO + tristate "Simple audio decoder chips" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for several audio decoder chips found on some bt8xx boards: + Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, + tea6320, tea6420, tda8425, ta8874z. + Microchip: pic16c54 based design on ProVideo PV951 board. + + To compile this driver as a module, choose M here: the + module will be called tvaudio. + +config VIDEO_TDA7432 + tristate "Philips TDA7432 audio processor" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for tda7432 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tda7432. + +config VIDEO_TDA9840 + tristate "Philips TDA9840 audio processor" + depends on I2C + ---help--- + Support for tda9840 audio decoder chip found on some Zoran boards. + + To compile this driver as a module, choose M here: the + module will be called tda9840. + +config VIDEO_TEA6415C + tristate "Philips TEA6415C audio processor" + depends on I2C + ---help--- + Support for tea6415c audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6415c. + +config VIDEO_TEA6420 + tristate "Philips TEA6420 audio processor" + depends on I2C + ---help--- + Support for tea6420 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6420. + +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400. + +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs5345. + +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs53l32a. + +config VIDEO_TLV320AIC23B + tristate "Texas Instruments TLV320AIC23B audio codec" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TLV320AIC23B audio codec. + + To compile this driver as a module, choose M here: the + module will be called tlv320aic23b. + +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. + + To compile this driver as a module, choose M here: the + module will be called wm8775. + +config VIDEO_WM8739 + tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8739 + stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8739. + +config VIDEO_VP27SMPX + tristate "Panasonic VP27s internal MPX" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the internal MPX of the Panasonic VP27s tuner. + + To compile this driver as a module, choose M here: the + module will be called vp27smpx. + +comment "RDS decoders" + +config VIDEO_SAA6588 + tristate "SAA6588 Radio Chip RDS decoder support" + depends on VIDEO_V4L2 && I2C + + help + Support for this Radio Data System (RDS) decoder. This allows + seeing radio station identification transmitted using this + standard. + + To compile this driver as a module, choose M here: the + module will be called saa6588. + +comment "Video decoders" + +config VIDEO_ADV7180 + tristate "Analog Devices ADV7180 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7180 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7180. + +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + +config VIDEO_ADV7604 + tristate "Analog Devices ADV7604 decoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices ADV7604 video decoder. + + This is a Analog Devices Component/Graphics Digitizer + with 4:1 Multiplexed HDMI Receiver. + + To compile this driver as a module, choose M here: the + module will be called adv7604. + +config VIDEO_BT819 + tristate "BT819A VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT819A video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt819. + +config VIDEO_BT856 + tristate "BT856 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT856 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt856. + +config VIDEO_BT866 + tristate "BT866 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT866 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt866. + +config VIDEO_KS0127 + tristate "KS0127 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for KS0127 video decoder. + + This chip is used on AverMedia AVS6EYES Zoran-based MJPEG + cards. + + To compile this driver as a module, choose M here: the + module will be called ks0127. + +config VIDEO_SAA7110 + tristate "Philips SAA7110 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7110 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7110. + +config VIDEO_SAA711X + tristate "Philips SAA7111/3/4/5 video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7111/3/4/5 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7115. + +config VIDEO_SAA7191 + tristate "Philips SAA7191 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7191 video decoder. + + To compile this driver as a module, choose M here: the + module will be called saa7191. + +config VIDEO_TVP514X + tristate "Texas Instruments TVP514x video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 + decoder. It is currently working with the TI OMAP3 camera + controller. + + To compile this driver as a module, choose M here: the + module will be called tvp514x. + +config VIDEO_TVP5150 + tristate "Texas Instruments TVP5150 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP5150 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp5150. + +config VIDEO_TVP7002 + tristate "Texas Instruments TVP7002 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP7002 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp7002. + +config VIDEO_VPX3220 + tristate "vpx3220a, vpx3216b & vpx3214c video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for VPX322x video decoders. + + To compile this driver as a module, choose M here: the + module will be called vpx3220. + +comment "Video and audio decoders" + +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + +source "drivers/media/i2c/cx25840/Kconfig" + +comment "MPEG video encoders" + +config VIDEO_CX2341X + tristate "Conexant CX2341x MPEG encoders" + depends on VIDEO_V4L2 + ---help--- + Support for the Conexant CX23416 MPEG encoders + and CX23415 MPEG encoder/decoders. + + This module currently supports the encoding functions only. + + To compile this driver as a module, choose M here: the + module will be called cx2341x. + +comment "Video encoders" + +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7127/9 digital video encoders. + + To compile this driver as a module, choose M here: the + module will be called saa7127. + +config VIDEO_SAA7185 + tristate "Philips SAA7185 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7185 video encoder. + + To compile this driver as a module, choose M here: the + module will be called saa7185. + +config VIDEO_ADV7170 + tristate "Analog Devices ADV7170 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7170 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7170. + +config VIDEO_ADV7175 + tristate "Analog Devices ADV7175 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7175 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7175. + +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + +config VIDEO_ADV7393 + tristate "ADV7393 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7393 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7393. + +config VIDEO_AD9389B + tristate "Analog Devices AD9389B encoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices AD9389B video encoder. + + This is a Analog Devices HDMI transmitter. + + To compile this driver as a module, choose M here: the + module will be called ad9389b. + +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C + help + Video output driver for AKM AK8813 and AK8814 TV encoders + +comment "Camera sensor devices" + +config VIDEO_APTINA_PLL + tristate + +config VIDEO_SMIAPP_PLL + tristate + +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + +config VIDEO_MT9T001 + tristate "Aptina MT9T001 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt0t001 3 Mpixel camera. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_TCM825X + tristate "TCM825x camera sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the Toshiba TCM825x VGA camera sensor. + It is used for example in Nokia N800. + +config VIDEO_SR030PC30 + tristate "Siliconfile SR030PC30 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_NOON010PC30 + tristate "Siliconfile NOON010PC30 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports NOON010PC30 CIF camera from Siliconfile + +source "drivers/media/i2c/m5mols/Kconfig" + +config VIDEO_S5K6AA + tristate "Samsung S5K6AAFX sensor support" + depends on MEDIA_CAMERA_SUPPORT + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M + camera sensor with an embedded SoC image signal processor. + +config VIDEO_S5K4ECGX + tristate "Samsung S5K4ECGX sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M + camera sensor with an embedded SoC image signal processor. + +source "drivers/media/i2c/smiapp/Kconfig" + +comment "Flash devices" + +config VIDEO_ADP1653 + tristate "ADP1653 flash support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the ADP1653 flash controller. It is used for + example in Nokia N900. + +config VIDEO_AS3645A + tristate "AS3645A flash driver support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the AS3645A and LM3555 flash controllers. It has + build in control for flash, torch and indicator LEDs. + +comment "Video improvement chips" + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. + +comment "Miscelaneous helper chips" + +config VIDEO_THS7303 + tristate "THS7303 Video Amplifier" + depends on I2C + help + Support for TI THS7303 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. +endmenu + +menu "Sensors used on soc_camera driver" + +if SOC_CAMERA + source "drivers/media/i2c/soc_camera/Kconfig" +endif + +endmenu + +endif |