aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb')
-rw-r--r--drivers/media/dvb/dm1105/dm1105.c272
-rw-r--r--drivers/media/dvb/dvb-usb/lmedm04.c107
-rw-r--r--drivers/media/dvb/frontends/stb0899_algo.c2
-rw-r--r--drivers/media/dvb/frontends/tda8261.c1
4 files changed, 280 insertions, 102 deletions
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 2d8b4044be3..b2b0c45f32a 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -20,6 +20,7 @@
*/
#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -49,11 +50,12 @@
#define UNSET (-1U)
-#define DM1105_BOARD_NOAUTO UNSET
-#define DM1105_BOARD_UNKNOWN 0
-#define DM1105_BOARD_DVBWORLD_2002 1
-#define DM1105_BOARD_DVBWORLD_2004 2
-#define DM1105_BOARD_AXESS_DM05 3
+#define DM1105_BOARD_NOAUTO UNSET
+#define DM1105_BOARD_UNKNOWN 0
+#define DM1105_BOARD_DVBWORLD_2002 1
+#define DM1105_BOARD_DVBWORLD_2004 2
+#define DM1105_BOARD_AXESS_DM05 3
+#define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO 4
/* ----------------------------------------------- */
/*
@@ -157,22 +159,38 @@
#define DM1105_MAX 0x04
#define DRIVER_NAME "dm1105"
+#define DM1105_I2C_GPIO_NAME "dm1105-gpio"
#define DM1105_DMA_PACKETS 47
#define DM1105_DMA_PACKET_LENGTH (128*4)
#define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS)
+/* */
+#define GPIO08 (1 << 8)
+#define GPIO13 (1 << 13)
+#define GPIO14 (1 << 14)
+#define GPIO15 (1 << 15)
+#define GPIO16 (1 << 16)
+#define GPIO17 (1 << 17)
+#define GPIO_ALL 0x03ffff
+
/* GPIO's for LNB power control */
-#define DM1105_LNB_MASK 0x00000000
-#define DM1105_LNB_OFF 0x00020000
-#define DM1105_LNB_13V 0x00010100
-#define DM1105_LNB_18V 0x00000100
+#define DM1105_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13))
+#define DM1105_LNB_OFF GPIO17
+#define DM1105_LNB_13V (GPIO16 | GPIO08)
+#define DM1105_LNB_18V GPIO08
/* GPIO's for LNB power control for Axess DM05 */
-#define DM05_LNB_MASK 0x00000000
-#define DM05_LNB_OFF 0x00020000/* actually 13v */
-#define DM05_LNB_13V 0x00020000
-#define DM05_LNB_18V 0x00030000
+#define DM05_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13))
+#define DM05_LNB_OFF GPIO17/* actually 13v */
+#define DM05_LNB_13V GPIO17
+#define DM05_LNB_18V (GPIO17 | GPIO16)
+
+/* GPIO's for LNB power control for unbranded with I2C on GPIO */
+#define UNBR_LNB_MASK (GPIO17 | GPIO16)
+#define UNBR_LNB_OFF 0
+#define UNBR_LNB_13V GPIO17
+#define UNBR_LNB_18V (GPIO17 | GPIO16)
static unsigned int card[] = {[0 ... 3] = UNSET };
module_param_array(card, int, NULL, 0444);
@@ -187,7 +205,11 @@ static unsigned int dm1105_devcount;
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
struct dm1105_board {
- char *name;
+ char *name;
+ struct {
+ u32 mask, off, v13, v18;
+ } lnb;
+ u32 gpio_scl, gpio_sda;
};
struct dm1105_subid {
@@ -199,15 +221,50 @@ struct dm1105_subid {
static const struct dm1105_board dm1105_boards[] = {
[DM1105_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
+ .lnb = {
+ .mask = DM1105_LNB_MASK,
+ .off = DM1105_LNB_OFF,
+ .v13 = DM1105_LNB_13V,
+ .v18 = DM1105_LNB_18V,
+ },
},
[DM1105_BOARD_DVBWORLD_2002] = {
.name = "DVBWorld PCI 2002",
+ .lnb = {
+ .mask = DM1105_LNB_MASK,
+ .off = DM1105_LNB_OFF,
+ .v13 = DM1105_LNB_13V,
+ .v18 = DM1105_LNB_18V,
+ },
},
[DM1105_BOARD_DVBWORLD_2004] = {
.name = "DVBWorld PCI 2004",
+ .lnb = {
+ .mask = DM1105_LNB_MASK,
+ .off = DM1105_LNB_OFF,
+ .v13 = DM1105_LNB_13V,
+ .v18 = DM1105_LNB_18V,
+ },
},
[DM1105_BOARD_AXESS_DM05] = {
.name = "Axess/EasyTv DM05",
+ .lnb = {
+ .mask = DM05_LNB_MASK,
+ .off = DM05_LNB_OFF,
+ .v13 = DM05_LNB_13V,
+ .v18 = DM05_LNB_18V,
+ },
+ },
+ [DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = {
+ .name = "Unbranded DM1105 with i2c on GPIOs",
+ .lnb = {
+ .mask = UNBR_LNB_MASK,
+ .off = UNBR_LNB_OFF,
+ .v13 = UNBR_LNB_13V,
+ .v18 = UNBR_LNB_18V,
+ },
+ .gpio_scl = GPIO14,
+ .gpio_sda = GPIO13,
},
};
@@ -293,6 +350,8 @@ struct dm1105_dev {
/* i2c */
struct i2c_adapter i2c_adap;
+ struct i2c_adapter i2c_bb_adap;
+ struct i2c_algo_bit_data i2c_bit;
/* irq */
struct work_struct work;
@@ -328,6 +387,103 @@ struct dm1105_dev {
#define dm_setl(reg, bit) dm_andorl((reg), (bit), (bit))
#define dm_clearl(reg, bit) dm_andorl((reg), (bit), 0)
+/* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines,
+ so we can use only 3 GPIO's from GPIO15 to GPIO17.
+ Here I don't check whether HOST is enebled as it is not implemented yet.
+ */
+static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff);
+
+}
+
+static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff);
+
+}
+
+static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val);
+
+}
+
+static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff;
+
+ return 0;
+}
+
+static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if ((mask & 0x0003ffff) && asoutput)
+ dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff);
+ else if ((mask & 0x0003ffff) && !asoutput)
+ dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff);
+
+}
+
+static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state)
+{
+ if (state)
+ dm1105_gpio_enable(dev, line, 0);
+ else {
+ dm1105_gpio_enable(dev, line, 1);
+ dm1105_gpio_clear(dev, line);
+ }
+}
+
+static void dm1105_setsda(void *data, int state)
+{
+ struct dm1105_dev *dev = data;
+
+ dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state);
+}
+
+static void dm1105_setscl(void *data, int state)
+{
+ struct dm1105_dev *dev = data;
+
+ dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state);
+}
+
+static int dm1105_getsda(void *data)
+{
+ struct dm1105_dev *dev = data;
+
+ return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda)
+ ? 1 : 0;
+}
+
+static int dm1105_getscl(void *data)
+{
+ struct dm1105_dev *dev = data;
+
+ return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl)
+ ? 1 : 0;
+}
+
static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg *msgs, int num)
{
@@ -436,31 +592,20 @@ static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe)
static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct dm1105_dev *dev = frontend_to_dm1105_dev(fe);
- u32 lnb_mask, lnb_13v, lnb_18v, lnb_off;
- switch (dev->boardnr) {
- case DM1105_BOARD_AXESS_DM05:
- lnb_mask = DM05_LNB_MASK;
- lnb_off = DM05_LNB_OFF;
- lnb_13v = DM05_LNB_13V;
- lnb_18v = DM05_LNB_18V;
- break;
- case DM1105_BOARD_DVBWORLD_2002:
- case DM1105_BOARD_DVBWORLD_2004:
- default:
- lnb_mask = DM1105_LNB_MASK;
- lnb_off = DM1105_LNB_OFF;
- lnb_13v = DM1105_LNB_13V;
- lnb_18v = DM1105_LNB_18V;
- }
-
- dm_writel(DM1105_GPIOCTR, lnb_mask);
+ dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1);
if (voltage == SEC_VOLTAGE_18)
- dm_writel(DM1105_GPIOVAL, lnb_18v);
+ dm1105_gpio_andor(dev,
+ dm1105_boards[dev->boardnr].lnb.mask,
+ dm1105_boards[dev->boardnr].lnb.v18);
else if (voltage == SEC_VOLTAGE_13)
- dm_writel(DM1105_GPIOVAL, lnb_13v);
+ dm1105_gpio_andor(dev,
+ dm1105_boards[dev->boardnr].lnb.mask,
+ dm1105_boards[dev->boardnr].lnb.v13);
else
- dm_writel(DM1105_GPIOVAL, lnb_off);
+ dm1105_gpio_andor(dev,
+ dm1105_boards[dev->boardnr].lnb.mask,
+ dm1105_boards[dev->boardnr].lnb.off);
return 0;
}
@@ -708,6 +853,38 @@ static int __devinit frontend_init(struct dm1105_dev *dev)
int ret;
switch (dev->boardnr) {
+ case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO:
+ dm1105_gpio_enable(dev, GPIO15, 1);
+ dm1105_gpio_clear(dev, GPIO15);
+ msleep(100);
+ dm1105_gpio_set(dev, GPIO15);
+ msleep(200);
+ dev->fe = dvb_attach(
+ stv0299_attach, &sharp_z0194a_config,
+ &dev->i2c_bb_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(dvb_pll_attach, dev->fe, 0x60,
+ &dev->i2c_bb_adap, DVB_PLL_OPERA1);
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ stv0288_attach, &earda_config,
+ &dev->i2c_bb_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(stb6000_attach, dev->fe, 0x61,
+ &dev->i2c_bb_adap);
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ si21xx_attach, &serit_config,
+ &dev->i2c_bb_adap);
+ if (dev->fe)
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ break;
case DM1105_BOARD_DVBWORLD_2004:
dev->fe = dvb_attach(
cx24116_attach, &serit_sp2633_config,
@@ -870,11 +1047,32 @@ static int __devinit dm1105_probe(struct pci_dev *pdev,
if (ret < 0)
goto err_dm1105_hw_exit;
+ i2c_set_adapdata(&dev->i2c_bb_adap, dev);
+ strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME);
+ dev->i2c_bb_adap.owner = THIS_MODULE;
+ dev->i2c_bb_adap.dev.parent = &pdev->dev;
+ dev->i2c_bb_adap.algo_data = &dev->i2c_bit;
+ dev->i2c_bit.data = dev;
+ dev->i2c_bit.setsda = dm1105_setsda;
+ dev->i2c_bit.setscl = dm1105_setscl;
+ dev->i2c_bit.getsda = dm1105_getsda;
+ dev->i2c_bit.getscl = dm1105_getscl;
+ dev->i2c_bit.udelay = 10;
+ dev->i2c_bit.timeout = 10;
+
+ /* Raise SCL and SDA */
+ dm1105_setsda(dev, 1);
+ dm1105_setscl(dev, 1);
+
+ ret = i2c_bit_add_bus(&dev->i2c_bb_adap);
+ if (ret < 0)
+ goto err_i2c_del_adapter;
+
/* dvb */
ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME,
THIS_MODULE, &pdev->dev, adapter_nr);
if (ret < 0)
- goto err_i2c_del_adapter;
+ goto err_i2c_del_adapters;
dvb_adapter = &dev->dvb_adapter;
@@ -952,6 +1150,8 @@ err_dvb_dmx_release:
dvb_dmx_release(dvbdemux);
err_dvb_unregister_adapter:
dvb_unregister_adapter(dvb_adapter);
+err_i2c_del_adapters:
+ i2c_del_adapter(&dev->i2c_bb_adap);
err_i2c_del_adapter:
i2c_del_adapter(&dev->i2c_adap);
err_dm1105_hw_exit:
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index f36f471deae..37b146961ae 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -207,17 +207,6 @@ static int lme2510_stream_restart(struct dvb_usb_device *d)
rbuff, sizeof(rbuff));
return ret;
}
-static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u32 keypress)
-{
- struct dvb_usb_device *d = adap->dev;
-
- deb_info(1, "INT Key Keypress =%04x", keypress);
-
- if (keypress > 0)
- rc_keydown(d->rc_dev, keypress, 0);
-
- return 0;
-}
static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
{
@@ -256,6 +245,7 @@ static void lme2510_int_response(struct urb *lme_urb)
struct lme2510_state *st = adap->dev->priv;
static u8 *ibuf, *rbuf;
int i = 0, offset;
+ u32 key;
switch (lme_urb->status) {
case 0:
@@ -282,10 +272,16 @@ static void lme2510_int_response(struct urb *lme_urb)
switch (ibuf[0]) {
case 0xaa:
- debug_data_snipet(1, "INT Remote data snipet in", ibuf);
- lme2510_remote_keypress(adap,
- (u32)(ibuf[2] << 24) + (ibuf[3] << 16) +
- (ibuf[4] << 8) + ibuf[5]);
+ debug_data_snipet(1, "INT Remote data snipet", ibuf);
+ if ((ibuf[4] + ibuf[5]) == 0xff) {
+ key = ibuf[5];
+ key += (ibuf[3] > 0)
+ ? (ibuf[3] ^ 0xff) << 8 : 0;
+ key += (ibuf[2] ^ 0xff) << 16;
+ deb_info(1, "INT Key =%08x", key);
+ if (adap->dev->rc_dev != NULL)
+ rc_keydown(adap->dev->rc_dev, key, 0);
+ }
break;
case 0xbb:
switch (st->tuner_config) {
@@ -691,45 +687,6 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
return (ret < 0) ? -ENODEV : 0;
}
-static int lme2510_int_service(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap->dev;
- struct rc_dev *rc;
- int ret;
-
- info("STA Configuring Remote");
-
- rc = rc_allocate_device();
- if (!rc)
- return -ENOMEM;
-
- usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
- strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
- rc->input_name = "LME2510 Remote Control";
- rc->input_phys = d->rc_phys;
- rc->map_name = RC_MAP_LME2510;
- rc->driver_name = "LME 2510";
- usb_to_input_id(d->udev, &rc->input_id);
-
- ret = rc_register_device(rc);
- if (ret) {
- rc_free_device(rc);
- return ret;
- }
- d->rc_dev = rc;
-
- /* Start the Interrupt */
- ret = lme2510_int_read(adap);
- if (ret < 0) {
- rc_unregister_device(rc);
- info("INT Unable to start Interrupt Service");
- return -ENODEV;
- }
-
- return 0;
-}
-
static u8 check_sum(u8 *p, u8 len)
{
u8 sum = 0;
@@ -831,7 +788,7 @@ static int lme_firmware_switch(struct usb_device *udev, int cold)
cold_fw = !cold;
- if (udev->descriptor.idProduct == 0x1122) {
+ if (le16_to_cpu(udev->descriptor.idProduct) == 0x1122) {
switch (dvb_usb_lme2510_firmware) {
default:
dvb_usb_lme2510_firmware = TUNER_S0194;
@@ -1053,8 +1010,11 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
end: if (ret) {
- kfree(adap->fe);
- adap->fe = NULL;
+ if (adap->fe) {
+ dvb_frontend_detach(adap->fe);
+ adap->fe = NULL;
+ }
+ adap->dev->props.rc.core.rc_codes = NULL;
return -ENODEV;
}
@@ -1097,8 +1057,12 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
return -ENODEV;
}
- /* Start the Interrupt & Remote*/
- ret = lme2510_int_service(adap);
+ /* Start the Interrupt*/
+ ret = lme2510_int_read(adap);
+ if (ret < 0) {
+ info("INT Unable to start Interrupt Service");
+ return -ENODEV;
+ }
return ret;
}
@@ -1204,6 +1168,12 @@ static struct dvb_usb_device_properties lme2510_properties = {
}
}
},
+ .rc.core = {
+ .protocol = RC_TYPE_NEC,
+ .module_name = "LME2510 Remote Control",
+ .allowed_protos = RC_TYPE_NEC,
+ .rc_codes = RC_MAP_LME2510,
+ },
.power_ctrl = lme2510_powerup,
.identify_state = lme2510_identify_state,
.i2c_algo = &lme2510_i2c_algo,
@@ -1246,6 +1216,12 @@ static struct dvb_usb_device_properties lme2510c_properties = {
}
}
},
+ .rc.core = {
+ .protocol = RC_TYPE_NEC,
+ .module_name = "LME2510 Remote Control",
+ .allowed_protos = RC_TYPE_NEC,
+ .rc_codes = RC_MAP_LME2510,
+ },
.power_ctrl = lme2510_powerup,
.identify_state = lme2510_identify_state,
.i2c_algo = &lme2510_i2c_algo,
@@ -1269,19 +1245,21 @@ static void *lme2510_exit_int(struct dvb_usb_device *d)
adap->feedcount = 0;
}
- if (st->lme_urb != NULL) {
+ if (st->usb_buffer != NULL) {
st->i2c_talk_onoff = 1;
st->signal_lock = 0;
st->signal_level = 0;
st->signal_sn = 0;
buffer = st->usb_buffer;
+ }
+
+ if (st->lme_urb != NULL) {
usb_kill_urb(st->lme_urb);
usb_free_coherent(d->udev, 5000, st->buffer,
st->lme_urb->transfer_dma);
info("Interrupt Service Stopped");
- rc_unregister_device(d->rc_dev);
- info("Remote Stopped");
}
+
return buffer;
}
@@ -1293,7 +1271,8 @@ static void lme2510_exit(struct usb_interface *intf)
if (d != NULL) {
usb_buffer = lme2510_exit_int(d);
dvb_usb_device_exit(intf);
- kfree(usb_buffer);
+ if (usb_buffer != NULL)
+ kfree(usb_buffer);
}
}
@@ -1327,5 +1306,5 @@ module_exit(lme2510_module_exit);
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.86");
+MODULE_VERSION("1.88");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
index 2da55ec2039..d70eee00f33 100644
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ b/drivers/media/dvb/frontends/stb0899_algo.c
@@ -23,7 +23,7 @@
#include "stb0899_priv.h"
#include "stb0899_reg.h"
-inline u32 stb0899_do_div(u64 n, u32 d)
+static inline u32 stb0899_do_div(u64 n, u32 d)
{
/* wrap do_div() for ease of use */
diff --git a/drivers/media/dvb/frontends/tda8261.c b/drivers/media/dvb/frontends/tda8261.c
index 1742056a34e..53c7d8f1df2 100644
--- a/drivers/media/dvb/frontends/tda8261.c
+++ b/drivers/media/dvb/frontends/tda8261.c
@@ -224,7 +224,6 @@ exit:
}
EXPORT_SYMBOL(tda8261_attach);
-MODULE_PARM_DESC(verbose, "Set verbosity level");
MODULE_AUTHOR("Manu Abraham");
MODULE_DESCRIPTION("TDA8261 8PSK/QPSK Tuner");
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-27 10:04:13 +0000