diff options
Diffstat (limited to 'drivers/media/dvb/pluto2/pluto2.c')
| -rw-r--r-- | drivers/media/dvb/pluto2/pluto2.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 6ca6713d527..7cb79ec685f 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -294,13 +294,13 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) /* Workaround for broken hardware: * [1] On startup NBPACKETS seems to contain an uninitialized value, - * but no packets have been transfered. + * but no packets have been transferred. * [2] Sometimes (actually very often) NBPACKETS stays at zero - * although one packet has been transfered. + * although one packet has been transferred. * [3] Sometimes (actually rarely), the card gets into an erroneous * mode where it continuously generates interrupts, claiming it - * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet - * has been transfered. Only a reset seems to solve this + * has received nbpackets>TS_DMA_PACKETS packets, but no packet + * has been transferred. Only a reset seems to solve this */ if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { unsigned int i = 0; @@ -332,7 +332,7 @@ static irqreturn_t pluto_irq(int irq, void *dev_id) struct pluto *pluto = dev_id; u32 tscr; - /* check whether an interrupt occured on this device */ + /* check whether an interrupt occurred on this device */ tscr = pluto_readreg(pluto, REG_TSCR); if (!(tscr & (TSCR_DE | TSCR_OVR))) return IRQ_NONE; |