diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
24 files changed, 1298 insertions, 431 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index c545039287a..e85304c59a2 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -292,6 +292,11 @@ config DVB_USB_ANYSEE select DVB_MT352 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_STV0900 if !DVB_FE_CUSTOMISE + select DVB_STV6110 if !DVB_FE_CUSTOMISE + select DVB_ISL6423 if !DVB_FE_CUSTOMISE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c index f8e9bf116f2..b95a95e1784 100644 --- a/drivers/media/dvb/dvb-usb/a800.c +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -78,17 +78,26 @@ static struct rc_map_table rc_map_a800_table[] = { static int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5]; + int ret; + u8 *key = kmalloc(5, GFP_KERNEL); + if (!key) + return -ENOMEM; + if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0), 0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5, - 2000) != 5) - return -ENODEV; + 2000) != 5) { + ret = -ENODEV; + goto out; + } /* call the universal NEC remote processor, to find out the key's state and event */ dvb_usb_nec_rc_key_to_event(d,key,event,state); if (key[0] != 0) deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); - return 0; + ret = 0; +out: + kfree(key); + return ret; } /* USB Driver stuff */ diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 6b402e94353..7c327b54308 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -36,6 +36,11 @@ #include "mt352.h" #include "mt352_priv.h" #include "zl10353.h" +#include "tda18212.h" +#include "cx24116.h" +#include "stv0900.h" +#include "stv6110.h" +#include "isl6423.h" /* debug */ static int dvb_usb_anysee_debug; @@ -55,8 +60,6 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, int act_len, ret; u8 buf[64]; - if (slen > sizeof(buf)) - slen = sizeof(buf); memcpy(&buf[0], sbuf, slen); buf[60] = state->seq++; @@ -105,6 +108,27 @@ static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); } +/* write single register with mask */ +static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, + u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = anysee_read_reg(d, reg, &tmp); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return anysee_write_reg(d, reg, val); +} + static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) { u8 buf[] = {CMD_GET_HW_INFO}; @@ -154,30 +178,37 @@ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, { struct dvb_usb_device *d = i2c_get_adapdata(adap); int ret = 0, inc, i = 0; + u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */ if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; while (i < num) { if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - u8 buf[6]; + if (msg[i].len > 2 || msg[i+1].len > 60) { + ret = -EOPNOTSUPP; + break; + } buf[0] = CMD_I2C_READ; - buf[1] = msg[i].addr + 1; + buf[1] = (msg[i].addr << 1) | 0x01; buf[2] = msg[i].buf[0]; - buf[3] = 0x00; - buf[4] = 0x00; - buf[5] = 0x01; - ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + buf[3] = msg[i].buf[1]; + buf[4] = msg[i].len-1; + buf[5] = msg[i+1].len; + ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf, msg[i+1].len); inc = 2; } else { - u8 buf[4+msg[i].len]; + if (msg[i].len > 48) { + ret = -EOPNOTSUPP; + break; + } buf[0] = CMD_I2C_WRITE; - buf[1] = msg[i].addr; + buf[1] = (msg[i].addr << 1); buf[2] = msg[i].len; buf[3] = 0x01; memcpy(&buf[4], msg[i].buf, msg[i].len); - ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0); inc = 1; } if (ret) @@ -224,7 +255,7 @@ static int anysee_mt352_demod_init(struct dvb_frontend *fe) /* Callbacks for DVB USB */ static struct tda10023_config anysee_tda10023_config = { - .demod_address = 0x1a, + .demod_address = (0x1a >> 1), .invert = 0, .xtal = 16000000, .pll_m = 11, @@ -235,143 +266,539 @@ static struct tda10023_config anysee_tda10023_config = { }; static struct mt352_config anysee_mt352_config = { - .demod_address = 0x1e, + .demod_address = (0x1e >> 1), .demod_init = anysee_mt352_demod_init, }; static struct zl10353_config anysee_zl10353_config = { - .demod_address = 0x1e, + .demod_address = (0x1e >> 1), .parallel_ts = 1, }; +static struct zl10353_config anysee_zl10353_tda18212_config2 = { + .demod_address = (0x1e >> 1), + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, + .no_tuner = 1, + .if2 = 41500, +}; + +static struct zl10353_config anysee_zl10353_tda18212_config = { + .demod_address = (0x18 >> 1), + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, + .no_tuner = 1, + .if2 = 41500, +}; + +static struct tda10023_config anysee_tda10023_tda18212_config = { + .demod_address = (0x1a >> 1), + .xtal = 16000000, + .pll_m = 12, + .pll_p = 3, + .pll_n = 1, + .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C, + .deltaf = 0xba02, +}; + +static struct tda18212_config anysee_tda18212_config = { + .i2c_address = (0xc0 >> 1), + .if_dvbt_6 = 4150, + .if_dvbt_7 = 4150, + .if_dvbt_8 = 4150, + .if_dvbc = 5000, +}; + +static struct cx24116_config anysee_cx24116_config = { + .demod_address = (0xaa >> 1), + .mpg_clk_pos_pol = 0x00, + .i2c_wr_max = 48, +}; + +static struct stv0900_config anysee_stv0900_config = { + .demod_address = (0xd0 >> 1), + .demod_mode = 0, + .xtal = 8000000, + .clkmode = 3, + .diseqc_mode = 2, + .tun1_maddress = 0, + .tun1_adc = 1, /* 1 Vpp */ + .path1_mode = 3, +}; + +static struct stv6110_config anysee_stv6110_config = { + .i2c_address = (0xc0 >> 1), + .mclk = 16000000, + .clk_div = 1, +}; + +static struct isl6423_config anysee_isl6423_config = { + .current_max = SEC_CURRENT_800m, + .curlim = SEC_CURRENT_LIM_OFF, + .mod_extern = 1, + .addr = (0x10 >> 1), +}; + +/* + * New USB device strings: Mfr=1, Product=2, SerialNumber=0 + * Manufacturer: AMT.CO.KR + * + * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=???????? + * PCB: ? + * parts: DNOS404ZH102A(MT352, DTT7579(?)) + * + * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=???????? + * PCB: ? + * parts: DNOS404ZH103A(ZL10353, DTT7579(?)) + * + * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee" + * PCB: 507CD (rev1.1) + * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01 + * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe + * IOA=4f IOB=ff IOC=00 IOD=06 IOF=01 + * IOD[0] ZL10353 1=enabled + * IOA[7] TS 0=enabled + * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not) + * + * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)" + * PCB: 507DC (rev0.2) + * parts: TDA10023, DTOS403IH102B TM, CST56I01 + * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe + * IOA=4f IOB=ff IOC=00 IOD=26 IOF=01 + * IOD[0] TDA10023 1=enabled + * + * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)" + * PCB: 507SI (rev2.1) + * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024 + * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe + * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01 + * IOD[0] CX24116 1=enabled + * + * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" + * PCB: 507FA (rev0.4) + * parts: TDA10023, DTOS403IH102B TM, TDA8024 + * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff + * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0 + * IOD[5] TDA10023 1=enabled + * IOE[0] tuner 1=enabled + * + * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" + * PCB: 507FA (rev1.1) + * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024 + * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff + * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0 + * DVB-C: + * IOD[5] TDA10023 1=enabled + * IOE[0] tuner 1=enabled + * DVB-T: + * IOD[0] ZL10353 1=enabled + * IOE[0] tuner 0=enabled + * tuner is behind ZL10353 I2C-gate + * + * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)" + * PCB: 508TC (rev0.6) + * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) + * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff + * IOA=4d IOB=00 IOC=cc IOD=48 IOF=e4 + * IOA[7] TS 1=enabled + * IOE[4] TDA18212 1=enabled + * DVB-C: + * IOD[6] ZL10353 0=disabled + * IOD[5] TDA10023 1=enabled + * IOE[0] IF 1=enabled + * DVB-T: + * IOD[5] TDA10023 0=disabled + * IOD[6] ZL10353 1=enabled + * IOE[0] IF 0=enabled + * + * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)" + * PCB: 508S2 (rev0.7) + * parts: DNBU10512IST(STV0903, STV6110), ISL6423 + * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff + * IOA=4d IOB=00 IOC=c4 IOD=08 IOF=e4 + * IOA[7] TS 1=enabled + * IOE[5] STV0903 1=enabled + * + */ + static int anysee_frontend_attach(struct dvb_usb_adapter *adap) { int ret; struct anysee_state *state = adap->dev->priv; u8 hw_info[3]; - u8 io_d; /* IO port D */ + u8 tmp; + struct i2c_msg msg[2] = { + { + .addr = anysee_tda18212_config.i2c_address, + .flags = 0, + .len = 1, + .buf = "\x00", + }, { + .addr = anysee_tda18212_config.i2c_address, + .flags = I2C_M_RD, + .len = 1, + .buf = &tmp, + } + }; - /* check which hardware we have - We must do this call two times to get reliable values (hw bug). */ + /* Check which hardware we have. + * We must do this call two times to get reliable values (hw bug). + */ ret = anysee_get_hw_info(adap->dev, hw_info); if (ret) - return ret; + goto error; + ret = anysee_get_hw_info(adap->dev, hw_info); if (ret) - return ret; + goto error; /* Meaning of these info bytes are guessed. */ - info("firmware version:%d.%d.%d hardware id:%d", - 0, hw_info[1], hw_info[2], hw_info[0]); + info("firmware version:%d.%d hardware id:%d", + hw_info[1], hw_info[2], hw_info[0]); - ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ - if (ret) - return ret; - deb_info("%s: IO port D:%02x\n", __func__, io_d); - - /* Select demod using trial and error method. */ - - /* Try to attach demodulator in following order: - model demod hw firmware - 1. E30 MT352 02 0.2.1 - 2. E30 ZL10353 02 0.2.1 - 3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo - 4. E30 Plus ZL10353 06 0.1.0 - 5. E30C Plus TDA10023 0a 0.1.0 rev 0.2 - E30C Plus TDA10023 0f 0.1.2 rev 0.4 - E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo - */ - - /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ - adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, - &adap->dev->i2c_adap); - if (adap->fe != NULL) { - state->tuner = DVB_PLL_THOMSON_DTT7579; - return 0; - } + state->hw = hw_info[0]; - /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ - adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe != NULL) { - state->tuner = DVB_PLL_THOMSON_DTT7579; - return 0; - } + switch (state->hw) { + case ANYSEE_HW_02: /* 2 */ + /* E30 */ + + /* attach demod */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe) + break; + + /* attach demod */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + + break; + case ANYSEE_HW_507CD: /* 6 */ + /* E30 Plus */ - /* for E30 Combo Plus DVB-T demodulator */ - if (dvb_usb_anysee_delsys) { - ret = anysee_write_reg(adap->dev, 0xb0, 0x01); + /* enable DVB-T demod on IOD[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); if (ret) - return ret; + goto error; + + /* enable transport stream on IOA[7] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80); + if (ret) + goto error; - /* Zarlink ZL10353 DVB-T demod */ + /* attach demod */ adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe != NULL) { - state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; - return 0; + &adap->dev->i2c_adap); + + break; + case ANYSEE_HW_507DC: /* 10 */ + /* E30 C Plus */ + + /* enable DVB-C demod on IOD[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); + if (ret) + goto error; + + /* attach demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + + break; + case ANYSEE_HW_507SI: /* 11 */ + /* E30 S2 Plus */ + + /* enable DVB-S/S2 demod on IOD[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); + if (ret) + goto error; + + /* attach demod */ + adap->fe = dvb_attach(cx24116_attach, &anysee_cx24116_config, + &adap->dev->i2c_adap); + + break; + case ANYSEE_HW_507FA: /* 15 */ + /* E30 Combo Plus */ + /* E30 C Plus */ + + /* enable tuner on IOE[4] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); + if (ret) + goto error; + + /* probe TDA18212 */ + tmp = 0; + ret = i2c_transfer(&adap->dev->i2c_adap, msg, 2); + if (ret == 2 && tmp == 0xc7) + deb_info("%s: TDA18212 found\n", __func__); + else + tmp = 0; + + /* disable tuner on IOE[4] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10); + if (ret) + goto error; + + if (dvb_usb_anysee_delsys) { + /* disable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), + 0x20); + if (ret) + goto error; + + /* enable DVB-T demod on IOD[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), + 0x01); + if (ret) + goto error; + + /* attach demod */ + if (tmp == 0xc7) { + /* TDA18212 config */ + adap->fe = dvb_attach(zl10353_attach, + &anysee_zl10353_tda18212_config2, + &adap->dev->i2c_adap); + } else { + /* PLL config */ + adap->fe = dvb_attach(zl10353_attach, + &anysee_zl10353_config, + &adap->dev->i2c_adap); + } + } else { + /* disable DVB-T demod on IOD[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0), + 0x01); + if (ret) + goto error; + + /* enable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), + 0x20); + if (ret) + goto error; + + /* attach demod */ + if (tmp == 0xc7) { + /* TDA18212 config */ + adap->fe = dvb_attach(tda10023_attach, + &anysee_tda10023_tda18212_config, + &adap->dev->i2c_adap, 0x48); + } else { + /* PLL config */ + adap->fe = dvb_attach(tda10023_attach, + &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + } } - } - /* connect demod on IO port D for TDA10023 & ZL10353 */ - ret = anysee_write_reg(adap->dev, 0xb0, 0x25); - if (ret) - return ret; + break; + case ANYSEE_HW_508TC: /* 18 */ + /* E7 TC */ - /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ - adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe != NULL) { - state->tuner = DVB_PLL_THOMSON_DTT7579; - return 0; - } + /* enable transport stream on IOA[7] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); + if (ret) + goto error; + + if (dvb_usb_anysee_delsys) { + /* disable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5), + 0x20); + if (ret) + goto error; + + /* enable DVB-T demod on IOD[6] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6), + 0x40); + if (ret) + goto error; + + /* enable IF route on IOE[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0), + 0x01); + if (ret) + goto error; + + /* attach demod */ + adap->fe = dvb_attach(zl10353_attach, + &anysee_zl10353_tda18212_config, + &adap->dev->i2c_adap); + } else { + /* disable DVB-T demod on IOD[6] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6), + 0x40); + if (ret) + goto error; + + /* enable DVB-C demod on IOD[5] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5), + 0x20); + if (ret) + goto error; + + /* enable IF route on IOE[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0), + 0x01); + if (ret) + goto error; + + /* attach demod */ + adap->fe = dvb_attach(tda10023_attach, + &anysee_tda10023_tda18212_config, + &adap->dev->i2c_adap, 0x48); + } - /* IO port E - E30C rev 0.4 board requires this */ - ret = anysee_write_reg(adap->dev, 0xb1, 0xa7); - if (ret) - return ret; + break; + case ANYSEE_HW_508S2: /* 19 */ + /* E7 S2 */ - /* Philips TDA10023 DVB-C demod */ - adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, - &adap->dev->i2c_adap, 0x48); - if (adap->fe != NULL) { - state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; - return 0; - } + /* enable transport stream on IOA[7] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); + if (ret) + goto error; - /* return IO port D to init value for safe */ - ret = anysee_write_reg(adap->dev, 0xb0, io_d); - if (ret) - return ret; + /* enable DVB-S/S2 demod on IOE[5] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20); + if (ret) + goto error; + + /* attach demod */ + adap->fe = dvb_attach(stv0900_attach, &anysee_stv0900_config, + &adap->dev->i2c_adap, 0); - err("Unknown Anysee version: %02x %02x %02x. "\ - "Please report the <linux-dvb@linuxtv.org>.", - hw_info[0], hw_info[1], hw_info[2]); + break; + } - return -ENODEV; + if (!adap->fe) { + /* we have no frontend :-( */ + ret = -ENODEV; + err("Unsupported Anysee version. " \ + "Please report the <linux-media@vger.kernel.org>."); + } +error: + return ret; } static int anysee_tuner_attach(struct dvb_usb_adapter *adap) { struct anysee_state *state = adap->dev->priv; + struct dvb_frontend *fe; + int ret; deb_info("%s:\n", __func__); - switch (state->tuner) { - case DVB_PLL_THOMSON_DTT7579: - /* Thomson dtt7579 (not sure) PLL inside of: - Samsung DNOS404ZH102A NIM - Samsung DNOS404ZH103A NIM */ - dvb_attach(dvb_pll_attach, adap->fe, 0x61, - NULL, DVB_PLL_THOMSON_DTT7579); + switch (state->hw) { + case ANYSEE_HW_02: /* 2 */ + /* E30 */ + + /* attach tuner */ + fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1), + NULL, DVB_PLL_THOMSON_DTT7579); + + break; + case ANYSEE_HW_507CD: /* 6 */ + /* E30 Plus */ + + /* attach tuner */ + fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1), + &adap->dev->i2c_adap, DVB_PLL_THOMSON_DTT7579); + + break; + case ANYSEE_HW_507DC: /* 10 */ + /* E30 C Plus */ + + /* attach tuner */ + fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1), + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + + break; + case ANYSEE_HW_507SI: /* 11 */ + /* E30 S2 Plus */ + + /* attach LNB controller */ + fe = dvb_attach(isl6423_attach, adap->fe, &adap->dev->i2c_adap, + &anysee_isl6423_config); + + break; + case ANYSEE_HW_507FA: /* 15 */ + /* E30 Combo Plus */ + /* E30 C Plus */ + + if (dvb_usb_anysee_delsys) { + /* enable DVB-T tuner on IOE[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0), + 0x01); + if (ret) + goto error; + } else { + /* enable DVB-C tuner on IOE[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0), + 0x01); + if (ret) + goto error; + } + + /* Try first attach TDA18212 silicon tuner on IOE[4], if that + * fails attach old simple PLL. */ + + /* enable tuner on IOE[4] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); + if (ret) + goto error; + + /* attach tuner */ + fe = dvb_attach(tda18212_attach, adap->fe, &adap->dev->i2c_adap, + &anysee_tda18212_config); + if (fe) + break; + + /* disable tuner on IOE[4] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10); + if (ret) + goto error; + + /* attach tuner */ + fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1), + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; - case DVB_PLL_SAMSUNG_DTOS403IH102A: - /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ - dvb_attach(dvb_pll_attach, adap->fe, 0xc0, - &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + case ANYSEE_HW_508TC: /* 18 */ + /* E7 TC */ + + /* enable tuner on IOE[4] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); + if (ret) + goto error; + + /* attach tuner */ + fe = dvb_attach(tda18212_attach, adap->fe, &adap->dev->i2c_adap, + &anysee_tda18212_config); + break; + case ANYSEE_HW_508S2: /* 19 */ + /* E7 S2 */ + + /* attach tuner */ + fe = dvb_attach(stv6110_attach, adap->fe, + &anysee_stv6110_config, &adap->dev->i2c_adap); + + if (fe) { + /* attach LNB controller */ + fe = dvb_attach(isl6423_attach, adap->fe, + &adap->dev->i2c_adap, &anysee_isl6423_config); + } + + break; + default: + fe = NULL; } - return 0; + if (fe) + ret = 0; + else + ret = -ENODEV; + +error: + return ret; } static int anysee_rc_query(struct dvb_usb_device *d) diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h index 7ca01ff6e13..a7673aa1e00 100644 --- a/drivers/media/dvb/dvb-usb/anysee.h +++ b/drivers/media/dvb/dvb-usb/anysee.h @@ -57,10 +57,29 @@ enum cmd { }; struct anysee_state { - u8 tuner; + u8 hw; /* PCB ID */ u8 seq; }; +#define ANYSEE_HW_02 2 /* E30 */ +#define ANYSEE_HW_507CD 6 /* E30 Plus */ +#define ANYSEE_HW_507DC 10 /* E30 C Plus */ +#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ +#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ +#define ANYSEE_HW_508TC 18 /* E7 TC */ +#define ANYSEE_HW_508S2 19 /* E7 S2 */ + +#define REG_IOA 0x80 /* Port A (bit addressable) */ +#define REG_IOB 0x90 /* Port B (bit addressable) */ +#define REG_IOC 0xa0 /* Port C (bit addressable) */ +#define REG_IOD 0xb0 /* Port D (bit addressable) */ +#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */ +#define REG_OEA 0xb2 /* Port A Output Enable */ +#define REG_OEB 0xb3 /* Port B Output Enable */ +#define REG_OEC 0xb4 /* Port C Output Enable */ +#define REG_OED 0xb5 /* Port D Output Enable */ +#define REG_OEE 0xb6 /* Port E Output Enable */ + #endif /*************************************************************************** @@ -136,7 +155,7 @@ General reply packet(s) are always used if not own reply defined. ---------------------------------------------------------------------------- | 04 | 0x00 ---------------------------------------------------------------------------- -| 05 | 0x01 +| 05 | data length ---------------------------------------------------------------------------- | 06-59 | don't care ---------------------------------------------------------------------------- diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c index eb34cc3894e..2351077ff2b 100644 --- a/drivers/media/dvb/dvb-usb/au6610.c +++ b/drivers/media/dvb/dvb-usb/au6610.c @@ -33,8 +33,16 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, { int ret; u16 index; - u8 usb_buf[6]; /* enough for all known requests, - read returns 5 and write 6 bytes */ + u8 *usb_buf; + + /* + * allocate enough for all known requests, + * read returns 5 and write 6 bytes + */ + usb_buf = kmalloc(6, GFP_KERNEL); + if (!usb_buf) + return -ENOMEM; + switch (wlen) { case 1: index = wbuf[0] << 8; @@ -45,14 +53,15 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, break; default: warn("wlen = %x, aborting.", wlen); - return -EINVAL; + ret = -EINVAL; + goto error; } ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, - usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT); + usb_buf, 6, AU6610_USB_TIMEOUT); if (ret < 0) - return ret; + goto error; switch (operation) { case AU6610_REQ_I2C_READ: @@ -60,7 +69,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, /* requested value is always 5th byte in buffer */ rbuf[0] = usb_buf[4]; } - +error: + kfree(usb_buf); return ret; } diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c index 3df2045b7d2..6d1a3041540 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/dvb/dvb-usb/ce6230.c @@ -39,7 +39,7 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) u8 requesttype; u16 value; u16 index; - u8 buf[req->data_len]; + u8 *buf; request = req->cmd; value = req->value; @@ -62,6 +62,12 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) goto error; } + buf = kmalloc(req->data_len, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto error; + } + if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { /* write */ memcpy(buf, req->data, req->data_len); @@ -74,7 +80,7 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) msleep(1); /* avoid I2C errors */ ret = usb_control_msg(udev, pipe, request, requesttype, value, index, - buf, sizeof(buf), CE6230_USB_TIMEOUT); + buf, req->data_len, CE6230_USB_TIMEOUT); ce6230_debug_dump(request, requesttype, value, index, buf, req->data_len, deb_xfer); @@ -88,6 +94,7 @@ static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) if (!ret && requestt |