aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/dvb-usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
-rw-r--r--drivers/media/dvb/dvb-usb/anysee.c302
-rw-r--r--drivers/media/dvb/dvb-usb/anysee.h19
2 files changed, 233 insertions, 88 deletions
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index d50118ccc10..ff9226e1843 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -105,6 +105,27 @@ static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
}
+/* write single register with mask */
+static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+ u8 mask)
+{
+ int ret;
+ u8 tmp;
+
+ /* no need for read if whole reg is written */
+ if (mask != 0xff) {
+ ret = anysee_read_reg(d, reg, &tmp);
+ if (ret)
+ return ret;
+
+ val &= mask;
+ tmp &= ~mask;
+ val |= tmp;
+ }
+
+ return anysee_write_reg(d, reg, val);
+}
+
static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
{
u8 buf[] = {CMD_GET_HW_INFO};
@@ -244,134 +265,241 @@ static struct zl10353_config anysee_zl10353_config = {
.parallel_ts = 1,
};
+/*
+ * New USB device strings: Mfr=1, Product=2, SerialNumber=0
+ * Manufacturer: AMT.CO.KR
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: MT352, DTT7579(?), DNOS404ZH102A NIM
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: ZL10353, DTT7579(?), DNOS404ZH103A NIM
+ *
+ * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
+ * PCB: 507CD (rev1.1)
+ * parts: ZL10353, DTT7579(?), CST56I01, DNOS404ZH103A NIM
+ * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
+ * IOD[0] ZL10353 1=enabled
+ * IOA[7] TS 0=enabled
+ * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
+ *
+ * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
+ * PCB: 507DC (rev0.2)
+ * parts: TDA10023, CST56I01, DTOS403IH102B TM
+ * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
+ * IOD[0] TDA10023 1=enabled
+ *
+ * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev0.4)
+ * parts: TDA10023, TDA8024, DTOS403IH102B TM
+ * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ *
+ * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev1.1)
+ * parts: ZL10353, TDA10023, TDA8024, DTOS403IH102B TM
+ * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
+ * DVB-C:
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ * DVB-T:
+ * IOD[0] ZL10353 1=enabled
+ * IOE[0] tuner 0=enabled
+ * tuner is behind ZL10353 I2C-gate
+ */
+
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct anysee_state *state = adap->dev->priv;
u8 hw_info[3];
- u8 io_d; /* IO port D */
- /* check which hardware we have
- We must do this call two times to get reliable values (hw bug). */
+ /* Check which hardware we have.
+ * We must do this call two times to get reliable values (hw bug).
+ */
ret = anysee_get_hw_info(adap->dev, hw_info);
if (ret)
- return ret;
+ goto error;
+
ret = anysee_get_hw_info(adap->dev, hw_info);
if (ret)
- return ret;
+ goto error;
/* Meaning of these info bytes are guessed. */
info("firmware version:%d.%d hardware id:%d",
hw_info[1], hw_info[2], hw_info[0]);
- ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
- if (ret)
- return ret;
- deb_info("%s: IO port D:%02x\n", __func__, io_d);
-
- /* Select demod using trial and error method. */
-
- /* Try to attach demodulator in following order:
- model demod hw fw
- 1. E30 MT352 02 2.1
- 2. E30 ZL10353 02 2.1
- 3. E30 Combo ZL10353 0f 1.2 DVB-T/C combo
- 4. E30 Plus ZL10353 06 1.0
- 5. E30C Plus TDA10023 0a 1.0 rev 0.2
- E30C Plus TDA10023 0f 1.2 rev 0.4
- E30 Combo TDA10023 0f 1.2 DVB-T/C combo
- */
-
- /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
- adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
- &adap->dev->i2c_adap);
- if (adap->fe != NULL) {
- state->tuner = DVB_PLL_THOMSON_DTT7579;
- return 0;
- }
+ state->hw = hw_info[0];
- /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
- adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
- &adap->dev->i2c_adap);
- if (adap->fe != NULL) {
- state->tuner = DVB_PLL_THOMSON_DTT7579;
- return 0;
- }
+ switch (state->hw) {
+ case ANYSEE_HW_02: /* 2 */
+ /* E30 */
- /* for E30 Combo Plus DVB-T demodulator */
- if (dvb_usb_anysee_delsys) {
- ret = anysee_write_reg(adap->dev, 0xb0, 0x01);
- if (ret)
- return ret;
+ /* attach demod */
+ adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe)
+ break;
- /* Zarlink ZL10353 DVB-T demod */
+ /* attach demod */
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
- &adap->dev->i2c_adap);
- if (adap->fe != NULL) {
- state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
- return 0;
- }
- }
+ &adap->dev->i2c_adap);
+ if (adap->fe)
+ break;
- /* connect demod on IO port D for TDA10023 & ZL10353 */
- ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
- if (ret)
- return ret;
+ break;
+ case ANYSEE_HW_507CD: /* 6 */
+ /* E30 Plus */
- /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
- adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
- &adap->dev->i2c_adap);
- if (adap->fe != NULL) {
- state->tuner = DVB_PLL_THOMSON_DTT7579;
- return 0;
- }
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
- /* IO port E - E30C rev 0.4 board requires this */
- ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
- if (ret)
- return ret;
+ /* enable transport stream on IOA[7] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80);
+ if (ret)
+ goto error;
- /* Philips TDA10023 DVB-C demod */
- adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
- &adap->dev->i2c_adap, 0x48);
- if (adap->fe != NULL) {
- state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
- return 0;
- }
+ /* attach demod */
+ adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe)
+ break;
- /* return IO port D to init value for safe */
- ret = anysee_write_reg(adap->dev, 0xb0, io_d);
- if (ret)
- return ret;
+ break;
+ case ANYSEE_HW_507DC: /* 10 */
+ /* E30 C Plus */
+
+ /* enable DVB-C demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
+ &adap->dev->i2c_adap, 0x48);
+ if (adap->fe)
+ break;
- err("Unknown Anysee version: %02x %02x %02x. " \
- "Please report the <linux-media@vger.kernel.org>.",
- hw_info[0], hw_info[1], hw_info[2]);
+ break;
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ if (dvb_usb_anysee_delsys) {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe = dvb_attach(zl10353_attach,
+ &anysee_zl10353_config, &adap->dev->i2c_adap);
+ if (adap->fe)
+ break;
+ } else {
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe = dvb_attach(tda10023_attach,
+ &anysee_tda10023_config, &adap->dev->i2c_adap,
+ 0x48);
+ if (adap->fe)
+ break;
+ }
+ break;
+ }
- return -ENODEV;
+ if (!adap->fe) {
+ /* we have no frontend :-( */
+ ret = -ENODEV;
+ err("Unknown Anysee version: %02x %02x %02x. " \
+ "Please report the <linux-media@vger.kernel.org>.",
+ hw_info[0], hw_info[1], hw_info[2]);
+ }
+error:
+ return ret;
}
static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
{
struct anysee_state *state = adap->dev->priv;
+ int ret = 0;
deb_info("%s:\n", __func__);
- switch (state->tuner) {
- case DVB_PLL_THOMSON_DTT7579:
- /* Thomson dtt7579 (not sure) PLL inside of:
- Samsung DNOS404ZH102A NIM
- Samsung DNOS404ZH103A NIM */
+ switch (state->hw) {
+ case ANYSEE_HW_02: /* 2 */
+ /* E30 */
+
+ /* attach tuner */
dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
NULL, DVB_PLL_THOMSON_DTT7579);
break;
- case DVB_PLL_SAMSUNG_DTOS403IH102A:
- /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
+ case ANYSEE_HW_507CD: /* 6 */
+ /* E30 Plus */
+
+ /* attach tuner */
+ dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
+ &adap->dev->i2c_adap, DVB_PLL_THOMSON_DTT7579);
+
+ break;
+ case ANYSEE_HW_507DC: /* 10 */
+ /* E30 C Plus */
+
+ /* attach tuner */
+ dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
+ &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+ break;
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ if (dvb_usb_anysee_delsys) {
+ /* enable DVB-T tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* enable DVB-C tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ }
+
+ /* attach tuner */
dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+
break;
+ default:
+ ret = -ENODEV;
}
- return 0;
+error:
+ return ret;
}
static int anysee_rc_query(struct dvb_usb_device *d)
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index 686e06044fc..0f7b4d48a5c 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -57,10 +57,27 @@ enum cmd {
};
struct anysee_state {
- u8 tuner;
+ u8 hw; /* PCB ID */
u8 seq;
};
+#define ANYSEE_HW_02 2 /* E30 */
+#define ANYSEE_HW_507CD 6 /* E30 Plus */
+#define ANYSEE_HW_507DC 10 /* E30 C Plus */
+#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
+
+#define REG_IOA 0x80 /* Port A (bit addressable) */
+#define REG_IOB 0x90 /* Port B (bit addressable) */
+#define REG_IOC 0xa0 /* Port C (bit addressable) */
+#define REG_IOD 0xb0 /* Port D (bit addressable) */
+#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */
+#define REG_OEA 0xb2 /* Port A Output Enable */
+#define REG_OEB 0xb3 /* Port B Output Enable */
+#define REG_OEC 0xb4 /* Port C Output Enable */
+#define REG_OED 0xb5 /* Port D Output Enable */
+#define REG_OEE 0xb6 /* Port E Output Enable */
+
#endif
/***************************************************************************
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-12 17:24:13 +0000