diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/vp702x.h')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/vp702x.h | 43 |
1 files changed, 21 insertions, 22 deletions
diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h index 4a3e8c7eca2..a808d48e7bf 100644 --- a/drivers/media/dvb/dvb-usb/vp702x.h +++ b/drivers/media/dvb/dvb-usb/vp702x.h @@ -13,47 +13,47 @@ extern int dvb_usb_vp702x_debug; /* commands are read and written with USB control messages */ /* consecutive read/write operation */ -#define REQUEST_OUT 0xB2 -#define REQUEST_IN 0xB3 +#define REQUEST_OUT 0xB2 +#define REQUEST_IN 0xB3 /* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0 * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer * the returning buffer looks as follows * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */ -#define GET_TUNER_STATUS 0x05 +#define GET_TUNER_STATUS 0x05 /* additional in buffer: * 0 1 2 3 4 5 6 7 8 * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */ -#define GET_SYSTEM_STRING 0x06 +#define GET_SYSTEM_STRING 0x06 /* additional in buffer: * 0 1 2 3 4 5 6 7 8 * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */ -#define SET_DISEQC_CMD 0x08 +#define SET_DISEQC_CMD 0x08 /* additional out buffer: * 0 1 2 3 4 * len X1 X2 X3 X4 * additional in buffer: * 0 1 2 - * N/A 0 0 b[1] == b[2] == 0 -> success otherwise not */ + * N/A 0 0 b[1] == b[2] == 0 -> success, failure otherwise */ -#define SET_LNB_POWER 0x09 +#define SET_LNB_POWER 0x09 /* additional out buffer: * 0 1 2 * 0x00 0xff 1 = on, 0 = off * additional in buffer: * 0 1 2 - * N/A 0 0 b[1] == b[2] == 0 -> success otherwise not */ + * N/A 0 0 b[1] == b[2] == 0 -> success failure otherwise */ -#define GET_MAC_ADDRESS 0x0A +#define GET_MAC_ADDRESS 0x0A /* #define GET_MAC_ADDRESS 0x0B */ /* additional in buffer: * 0 1 2 3 4 5 6 7 8 * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */ -#define SET_PID_FILTER 0x11 +#define SET_PID_FILTER 0x11 /* additional in buffer: * 0 1 ... 14 15 16 * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */ @@ -64,39 +64,38 @@ extern int dvb_usb_vp702x_debug; * freq0 freq1 divstep srate0 srate1 srate2 flag chksum */ - /* one direction requests */ -#define READ_REMOTE_REQ 0xB4 +#define READ_REMOTE_REQ 0xB4 /* IN i: 0; v: 0; b[0] == request, b[1] == key */ -#define READ_PID_NUMBER_REQ 0xB5 +#define READ_PID_NUMBER_REQ 0xB5 /* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */ -#define WRITE_EEPROM_REQ 0xB6 +#define WRITE_EEPROM_REQ 0xB6 /* OUT i: offset; v: value to write; no extra buffer */ -#define READ_EEPROM_REQ 0xB7 +#define READ_EEPROM_REQ 0xB7 /* IN i: bufferlen; v: offset; buffer with bufferlen bytes */ -#define READ_STATUS 0xB8 +#define READ_STATUS 0xB8 /* IN i: 0; v: 0; bufferlen 10 */ -#define READ_TUNER_REG_REQ 0xB9 +#define READ_TUNER_REG_REQ 0xB9 /* IN i: 0; v: register; b[0] = value */ -#define READ_FX2_REG_REQ 0xBA +#define READ_FX2_REG_REQ 0xBA /* IN i: offset; v: 0; b[0] = value */ -#define WRITE_FX2_REG_REQ 0xBB +#define WRITE_FX2_REG_REQ 0xBB /* OUT i: offset; v: value to write; 1 byte extra buffer */ -#define SET_TUNER_POWER_REQ 0xBC +#define SET_TUNER_POWER_REQ 0xBC /* IN i: 0 = power off, 1 = power on */ -#define WRITE_TUNER_REG_REQ 0xBD +#define WRITE_TUNER_REG_REQ 0xBD /* IN i: register, v: value to write, no extra buffer */ -#define RESET_TUNER 0xBE +#define RESET_TUNER 0xBE /* IN i: 0, v: 0, no extra buffer */ extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d); |