diff options
Diffstat (limited to 'drivers/media/dvb/b2c2')
| -rw-r--r-- | drivers/media/dvb/b2c2/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/Makefile | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-common.h | 6 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-dma.c | 165 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 26 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-hw-filter.c | 12 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-misc.c | 23 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-pci.c | 122 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-reg.h | 551 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-usb.c | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.c | 34 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.h | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop_ibi_value_be.h | 458 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop_ibi_value_le.h | 458 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/skystar2.c | 2644 |
15 files changed, 1209 insertions, 3310 deletions
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 99bd675df95..d7417eac2ab 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -6,6 +6,7 @@ config DVB_B2C2_FLEXCOP select DVB_MT312 select DVB_NXT2002 select DVB_STV0297 + select DVB_BCM3510 help Support for the digital TV receiver chip made by B2C2 Inc. included in Technisats PCI cards and USB boxes. @@ -34,17 +35,3 @@ config DVB_B2C2_FLEXCOP_DEBUG help Say Y if you want to enable the module option to control debug messages of all B2C2 FlexCop drivers. - -config DVB_B2C2_SKYSTAR - tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI" - depends on DVB_CORE && PCI - select DVB_STV0299 - select DVB_MT352 - select DVB_MT312 - select DVB_NXT2002 - help - Support for the Skystar2 PCI DVB card by Technisat, which - is equipped with the FlexCopII chipset by B2C2, and - for the B2C2/BBTI Air2PC-ATSC card. - - Say Y if you own such a device and want to use it. diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index 7703812af34..1a1c3bca55f 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -9,6 +9,4 @@ obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o b2c2-flexcop-usb-objs = flexcop-usb.o obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o -obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o - EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index 773d158032d..a94912ac187 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -108,6 +108,8 @@ void flexcop_device_kfree(struct flexcop_device*); int flexcop_device_initialize(struct flexcop_device*); void flexcop_device_exit(struct flexcop_device *fc); +void flexcop_reset_block_300(struct flexcop_device *fc); + /* from flexcop-dma.c */ int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size); void flexcop_dma_free(struct flexcop_dma *dma); @@ -115,7 +117,8 @@ void flexcop_dma_free(struct flexcop_dma *dma); int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); -int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index); +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx); +int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff); int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles); int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets); @@ -151,6 +154,7 @@ int flexcop_sram_init(struct flexcop_device *fc); /* from flexcop-misc.c */ void flexcop_determine_revision(struct flexcop_device *fc); void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix); +void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num); /* from flexcop-hw-filter.c */ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff); diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index 8d270607536..cf4ed1df608 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -37,22 +37,90 @@ void flexcop_dma_free(struct flexcop_dma *dma) } EXPORT_SYMBOL(flexcop_dma_free); -int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +int flexcop_dma_config(struct flexcop_device *fc, + struct flexcop_dma *dma, + flexcop_dma_index_t dma_idx) { - flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + flexcop_ibi_value v0x0,v0x4,v0xc; + v0x0.raw = v0x4.raw = v0xc.raw = 0; - if (no & FC_DMA_1) - v.ctrl_208.DMA1_Timer_Enable_sig = onoff; + v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; + v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; + v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; - if (no & FC_DMA_2) - v.ctrl_208.DMA2_Timer_Enable_sig = onoff; + if ((dma_idx & FC_DMA_1) == dma_idx) { + fc->write_ibi_reg(fc,dma1_000,v0x0); + fc->write_ibi_reg(fc,dma1_004,v0x4); + fc->write_ibi_reg(fc,dma1_00c,v0xc); + } else if ((dma_idx & FC_DMA_2) == dma_idx) { + fc->write_ibi_reg(fc,dma2_010,v0x0); + fc->write_ibi_reg(fc,dma2_014,v0x4); + fc->write_ibi_reg(fc,dma2_01c,v0xc); + } else { + err("either DMA1 or DMA2 can be configured at the within one flexcop_dma_config call."); + return -EINVAL; + } - fc->write_ibi_reg(fc,ctrl_208,v); return 0; } -EXPORT_SYMBOL(flexcop_dma_control_timer_irq); +EXPORT_SYMBOL(flexcop_dma_config); + +/* start the DMA transfers, but not the DMA IRQs */ +int flexcop_dma_xfer_control(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + flexcop_dma_addr_index_t index, + int onoff) +{ + flexcop_ibi_value v0x0,v0xc; + flexcop_ibi_register r0x0,r0xc; + + if ((dma_idx & FC_DMA_1) == dma_idx) { + r0x0 = dma1_000; + r0xc = dma1_00c; + } else if ((dma_idx & FC_DMA_2) == dma_idx) { + r0x0 = dma2_010; + r0xc = dma2_01c; + } else { + err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call."); + return -EINVAL; + } + + v0x0 = fc->read_ibi_reg(fc,r0x0); + v0xc = fc->read_ibi_reg(fc,r0xc); + + deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw); + deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw); + + if (index & FC_DMA_SUBADDR_0) + v0x0.dma_0x0.dma_0start = onoff; + + if (index & FC_DMA_SUBADDR_1) + v0xc.dma_0xc.dma_1start = onoff; + + fc->write_ibi_reg(fc,r0x0,v0x0); + fc->write_ibi_reg(fc,r0xc,v0xc); + + deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw); + deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_xfer_control); + +static int flexcop_dma_remap(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + int onoff) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + deb_info("%s\n",__FUNCTION__); + v.dma_0xc.remap_enable = onoff; + fc->write_ibi_reg(fc,r,v); + return 0; +} -int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +int flexcop_dma_control_size_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) { flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); @@ -67,75 +135,64 @@ int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t } EXPORT_SYMBOL(flexcop_dma_control_size_irq); -int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) { flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); if (no & FC_DMA_1) - v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff; + v.ctrl_208.DMA1_Timer_Enable_sig = onoff; if (no & FC_DMA_2) - v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff; + v.ctrl_208.DMA2_Timer_Enable_sig = onoff; fc->write_ibi_reg(fc,ctrl_208,v); return 0; } -EXPORT_SYMBOL(flexcop_dma_control_packet_irq); +EXPORT_SYMBOL(flexcop_dma_control_timer_irq); -int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index) +/* 1 cycles = 1.97 msec */ +int flexcop_dma_config_timer(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + u8 cycles) { + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); - flexcop_ibi_value v0x0,v0x4,v0xc; - v0x0.raw = v0x4.raw = v0xc.raw = 0; - - v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; - v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; - v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; - - if (index & FC_DMA_SUBADDR_0) - v0x0.dma_0x0.dma_0start = 1; - - if (index & FC_DMA_SUBADDR_1) - v0xc.dma_0xc.dma_1start = 1; - - if (dma_idx & FC_DMA_1) { - fc->write_ibi_reg(fc,dma1_000,v0x0); - fc->write_ibi_reg(fc,dma1_004,v0x4); - fc->write_ibi_reg(fc,dma1_00c,v0xc); - } else { /* (dma_idx & FC_DMA_2) */ - fc->write_ibi_reg(fc,dma2_010,v0x0); - fc->write_ibi_reg(fc,dma2_014,v0x4); - fc->write_ibi_reg(fc,dma2_01c,v0xc); - } - - return 0; -} -EXPORT_SYMBOL(flexcop_dma_config); + flexcop_dma_remap(fc,dma_idx,0); -static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff) -{ - flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; - flexcop_ibi_value v = fc->read_ibi_reg(fc,r); - v.dma_0xc.remap_enable = onoff; + deb_info("%s\n",__FUNCTION__); + v.dma_0x4_write.dmatimer = cycles; fc->write_ibi_reg(fc,r,v); return 0; } +EXPORT_SYMBOL(flexcop_dma_config_timer); -/* 1 cycles = 1.97 msec */ -int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles) +/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */ +int flexcop_dma_control_packet_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) { - flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; - flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); - flexcop_dma_remap(fc,dma_idx,0); + deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw); + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw); - v.dma_0x4_write.dmatimer = cycles >> 1; - fc->write_ibi_reg(fc,r,v); return 0; } -EXPORT_SYMBOL(flexcop_dma_config_timer); +EXPORT_SYMBOL(flexcop_dma_control_packet_irq); -int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets) +int flexcop_dma_config_packet_count(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + u8 packets) { flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; flexcop_ibi_value v = fc->read_ibi_reg(fc,r); diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 71be400e9ae..0410cc96a48 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -10,6 +10,7 @@ #include "stv0299.h" #include "mt352.h" #include "nxt2002.h" +#include "bcm3510.h" #include "stv0297.h" #include "mt312.h" @@ -285,21 +286,25 @@ static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_front } static struct mt352_config samsung_tdtc9251dh0_config = { - .demod_address = 0x0f, - .demod_init = samsung_tdtc9251dh0_demod_init, - .pll_set = samsung_tdtc9251dh0_pll_set, + .demod_init = samsung_tdtc9251dh0_demod_init, + .pll_set = samsung_tdtc9251dh0_pll_set, }; -static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) { struct flexcop_device *fc = fe->dvb->priv; return request_firmware(fw, name, fc->dev); } static struct nxt2002_config samsung_tbmv_config = { - .demod_address = 0x0a, - .request_firmware = nxt2002_request_firmware, + .demod_address = 0x0a, + .request_firmware = flexcop_fe_request_firmware, +}; + +static struct bcm3510_config air2pc_atsc_first_gen_config = { + .demod_address = 0x0f, + .request_firmware = flexcop_fe_request_firmware, }; static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) @@ -354,11 +359,16 @@ int flexcop_frontend_init(struct flexcop_device *fc) fc->dev_type = FC_AIR_DVB; info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); } else - /* try the air atsc (nxt2002) */ + /* try the air atsc 2nd generation (nxt2002) */ if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { - fc->dev_type = FC_AIR_ATSC; + fc->dev_type = FC_AIR_ATSC2; info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); } else + /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ + if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { + fc->dev_type = FC_AIR_ATSC1; + info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); + } else /* try the cable dvb (stv0297) */ if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { fc->dev_type = FC_CABLE; diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c index 2baf43d3ce8..75cf237196e 100644 --- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -10,6 +10,8 @@ static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff) { flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff); + + deb_ts("rcv_data is now: '%s'\n",onoff ? "on" : "off"); } void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff) @@ -151,7 +153,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d { int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; - fc->feedcount += onoff ? 1 : -1; + fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */ if (dvbdmxfeed->index >= max_pid_filter) fc->extra_feedcount += onoff ? 1 : -1; @@ -178,8 +180,14 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d /* if it was the first or last feed request change the stream-status */ if (fc->feedcount == onoff) { flexcop_rcv_data_ctrl(fc,onoff); - if (fc->stream_control) + if (fc->stream_control) /* device specific stream control */ fc->stream_control(fc,onoff); + + /* feeding stopped -> reset the flexcop filter*/ + if (onoff == 0) { + flexcop_reset_block_300(fc); + flexcop_hw_filter_init(fc); + } } return 0; diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 19e06da4677..3a08d38b318 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -45,11 +45,12 @@ const char *flexcop_revision_names[] = { const char *flexcop_device_names[] = { "Unkown device", - "AirStar 2 DVB-T", - "AirStar 2 ATSC", - "SkyStar 2 DVB-S", - "SkyStar 2 DVB-S (old version)", - "CableStar 2 DVB-C", + "Air2PC/AirStar 2 DVB-T", + "Air2PC/AirStar 2 ATSC 1st generation", + "Air2PC/AirStar 2 ATSC 2nd generation", + "Sky2PC/SkyStar 2 DVB-S", + "Sky2PC/SkyStar 2 DVB-S (old version)", + "Cable2PC/CableStar 2 DVB-C", }; const char *flexcop_bus_names[] = { @@ -64,3 +65,15 @@ void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type], flexcop_revision_names[fc->rev],suffix); } + +void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num) +{ + flexcop_ibi_value v; + int i; + for (i = 0; i < num; i++) { + v = fc->read_ibi_reg(fc,reg+4*i); + deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw); + } + deb_rdump("\n"); +} +EXPORT_SYMBOL(flexcop_dump_reg); diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index ed717c0073d..2f76eb3fea4 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -13,6 +13,10 @@ static int enable_pid_filtering = 1; module_param(enable_pid_filtering, int, 0444); MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); +static int irq_chk_intv; +module_param(irq_chk_intv, int, 0644); +MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging)."); + #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG #define dprintk(level,args...) \ do { if ((debug & level)) printk(args); } while (0) @@ -26,6 +30,7 @@ MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported #define deb_reg(args...) dprintk(0x02,args) #define deb_ts(args...) dprintk(0x04,args) #define deb_irq(args...) dprintk(0x08,args) +#define deb_chk(args...) dprintk(0x10,args) static int debug = 0; module_param(debug, int, 0644); @@ -56,6 +61,10 @@ struct flexcop_pci { spinlock_t irq_lock; + unsigned long last_irq; + + struct work_struct irq_check_work; + struct flexcop_device *fc_dev; }; @@ -88,18 +97,55 @@ static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_regi return 0; } +static void flexcop_pci_irq_check_work(void *data) +{ + struct flexcop_pci *fc_pci = data; + struct flexcop_device *fc = fc_pci->fc_dev; + + flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); + + flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4); + + if (v.sram_dest_reg_714.net_ovflow_error) + deb_chk("sram net_ovflow_error\n"); + if (v.sram_dest_reg_714.media_ovflow_error) + deb_chk("sram media_ovflow_error\n"); + if (v.sram_dest_reg_714.cai_ovflow_error) + deb_chk("sram cai_ovflow_error\n"); + if (v.sram_dest_reg_714.cai_ovflow_error) + deb_chk("sram cai_ovflow_error\n"); + + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); +} + /* When PID filtering is turned on, we use the timer IRQ, because small amounts * of data need to be passed to the user space instantly as well. When PID * filtering is turned off, we use the page-change-IRQ */ -static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t flexcop_pci_isr(int irq, void *dev_id, struct pt_regs *regs) { struct flexcop_pci *fc_pci = dev_id; struct flexcop_device *fc = fc_pci->fc_dev; - flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c); + flexcop_ibi_value v; irqreturn_t ret = IRQ_HANDLED; spin_lock_irq(&fc_pci->irq_lock); + v = fc->read_ibi_reg(fc,irq_20c); + + /* errors */ + if (v.irq_20c.Data_receiver_error) + deb_chk("data receiver error\n"); + if (v.irq_20c.Continuity_error_flag) + deb_chk("Contunuity error flag is set\n"); + if (v.irq_20c.LLC_SNAP_FLAG_set) + deb_chk("LLC_SNAP_FLAG_set is set\n"); + if (v.irq_20c.Transport_Error) + deb_chk("Transport error\n"); + + if ((fc_pci->count % 1000) == 0) + deb_chk("%d valid irq took place so far\n",fc_pci->count); + if (v.irq_20c.DMA1_IRQ_Status == 1) { if (fc_pci->active_dma1_addr == 0) flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188); @@ -115,8 +161,9 @@ static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2; u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0; - deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ", - v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos); + deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ", + jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos); + fc_pci->last_irq = jiffies; /* buffer end was reached, restarted from the beginning * pass the data from last_cur_pos to the buffer end to the demux @@ -127,7 +174,6 @@ static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos, (fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos); fc_pci->last_dma1_cur_pos = 0; - fc_pci->count = 0; } if (cur_pos > fc_pci->last_dma1_cur_pos) { @@ -139,16 +185,14 @@ static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) deb_irq("\n"); fc_pci->last_dma1_cur_pos = cur_pos; - } else + fc_pci->count++; + } else { + deb_irq("isr for flexcop called, apparently without reason (%08x)\n",v.raw); ret = IRQ_NONE; + } spin_unlock_irq(&fc_pci->irq_lock); -/* packet count would be ideal for hw filtering, but it isn't working. Either - * the data book is wrong, or I'm unable to read it correctly */ - -/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */ - return ret; } @@ -156,30 +200,35 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) { struct flexcop_pci *fc_pci = fc->bus_specific; if (onoff) { - flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); - flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); - flexcop_dma_config_timer(fc,FC_DMA_1,1); + flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1); + flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2); - if (fc_pci->fc_dev->pid_filtering) { - fc_pci->last_dma1_cur_pos = 0; - flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); - } else { - fc_pci->active_dma1_addr = 0; - flexcop_dma_control_size_irq(fc,FC_DMA_1,1); - } + flexcop_dma_config_timer(fc,FC_DMA_1,0); -/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0); - flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */ + flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,1); + deb_irq("DMA xfer enabled\n"); - deb_irq("irqs enabled\n"); + fc_pci->last_dma1_cur_pos = 0; + flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); + deb_irq("IRQ enabled\n"); + +// fc_pci->active_dma1_addr = 0; +// flexcop_dma_control_size_irq(fc,FC_DMA_1,1); + + if (irq_chk_intv > 0) + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); } else { - if (fc_pci->fc_dev->pid_filtering) - flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); - else - flexcop_dma_control_size_irq(fc,FC_DMA_1,0); + if (irq_chk_intv > 0) + cancel_delayed_work(&fc_pci->irq_check_work); + + flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); + deb_irq("IRQ disabled\n"); -// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0); - deb_irq("irqs disabled\n"); +// flexcop_dma_control_size_irq(fc,FC_DMA_1,0); + + flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,0); + deb_irq("DMA xfer disabled\n"); } return 0; @@ -198,6 +247,7 @@ static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci) flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2); fc_pci->init_state |= FC_PCI_DMA_INIT; + goto success; dma1_free: flexcop_dma_free(&fc_pci->dma[0]); @@ -244,7 +294,7 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci) pci_set_drvdata(fc_pci->pdev, fc_pci); - if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq, + if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr, SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0) goto err_pci_iounmap; @@ -324,6 +374,8 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e if ((ret = flexcop_pci_dma_init(fc_pci)) != 0) goto err_fc_exit; + INIT_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work, fc_pci); + goto success; err_fc_exit: flexcop_device_exit(fc); @@ -350,17 +402,17 @@ static void flexcop_pci_remove(struct pci_dev *pdev) static struct pci_device_id flexcop_pci_tbl[] = { { PCI_DEVICE(0x13d0, 0x2103) }, -/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */ +/* { PCI_DEVICE(0x13d0, 0x2200) }, ? */ { }, }; MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl); static struct pci_driver flexcop_pci_driver = { - .name = "Technisat/B2C2 FlexCop II/IIb/III PCI", + .name = "b2c2_flexcop_pci", .id_table = flexcop_pci_tbl, - .probe = flexcop_pci_probe, - .remove = flexcop_pci_remove, + .probe = flexcop_pci_probe, + .remove = flexcop_pci_remove, }; static int __init flexcop_pci_module_init(void) diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 5e131be55cb..4ae1eb5bfe9 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -21,7 +21,8 @@ extern const char *flexcop_revision_names[]; typedef enum { FC_UNK = 0, FC_AIR_DVB, - FC_AIR_ATSC, + FC_AIR_ATSC1, + FC_AIR_ATSC2, FC_SKY, FC_SKY_OLD, FC_CABLE, @@ -35,555 +36,21 @@ typedef enum { extern const char *flexcop_device_names[]; /* FlexCop IBI Registers */ +#if defined(__LITTLE_ENDIAN) + #include "flexcop_ibi_value_le.h" +#elif defined(__BIG_ENDIAN) + #include "flexcop_ibi_value_be.h" +#else + #error no endian defined +#endif -/* flexcop_ibi_reg - a huge union representing the register structure */ -typedef union { - u32 raw; - -/* DMA 0x000 to 0x01c - * DMA1 0x000 to 0x00c - * DMA2 0x010 to 0x01c - */ - struct { - u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */ - u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */ - u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */ - } dma_0x0; - - struct { - u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable - is able to be read and written while bit(1) of register - 0x00c (remap_enable) is set. This variable represents - the number of packets that will be transmitted to the PCI - host using PCI DMA1 before an interrupt to the PCI is - asserted. This functionality may be enabled using bit(20) - of register 0x208. N=0 disables the IRQ. */ - u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */ - } dma_0x4_remap; - - struct { - u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */ - u32 unused : 1; - u32 dma_addr_size :24; - } dma_0x4_read; - - struct { - u32 unused : 1; - u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */ - u32 dma_addr_size :24; - } dma_0x4_write; - - struct { - u32 unused : 2; - u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */ - } dma_0x8; - - struct { - u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */ - u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */ - u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */ - } dma_0xc; - -/* Two-wire Serial Master and Clock 0x100-0x110 */ - struct { -// u32 slave_transmitter : 1; /* ???*/ - u32 chipaddr : 7; /* two-line serial address of the target slave */ - u32 reserved1 : 1; - u32 baseaddr : 8; /* address of the location of the read/write operation */ - u32 data1_reg : 8; /* first byte in two-line serial read/write operation */ - u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready - * set to 1 when doing a write operation */ - u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */ - u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/ - u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */ - u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o - * preceding address assignment write frame - * ACK_ERROR = 1 when no ACK from slave in the last transaction */ - u32 st_done : 1; /* indicator for transaction is done */ - } tw_sm_c_100; - - struct { - u32 data2_reg : 8; /* 2nd data byte */ - u32 data3_reg : 8; /* 3rd data byte */ - u32 data4_reg : 8; /* 4th data byte */ - u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */ - u32 force_stop : 1; /* isolated stop flag */ - u32 unused : 6; - } tw_sm_c_104; - -/* Clock. The register allows the FCIII to convert an incoming Master clock - * (MCLK) signal into a lower frequency clock through the use of a LowCounter - * (TLO) and a High- Counter (THI). The time counts for THI and TLO are - * measured in MCLK; each count represents 4 MCLK input clock cycles. - * - * The default output for port #1 is set for Front End Demod communication. (0x108) - * The default output for port #2 is set for EEPROM communication. (0x10c) - * The default output for port #3 is set for Tuner communication. (0x110) - */ - struct { - u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_108; - - struct { - u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_10c; - - struct { - u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_110; - -/* LNB Switch Frequency 0x200 - * Clock that creates the LNB switch tone. The default is set to have a fixed - * low output (not oscillating) to the LNB_CTL line. - */ - struct { - u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */ - u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master - Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */ - u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */ - } lnb_switch_freq_200; - -/* ACPI, Peripheral Reset, LNB Polarity - * ACPI power conservation mode, LNB polarity selection (low or high voltage), - * and peripheral reset. - */ - struct { - u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */ - u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */ - u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */ - u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */ - u32 reserved :20; - u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */ - u32 Rev_N_sig_reserved1 : 2; - u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */ - u32 Rev_N_sig_reserved2 : 1; - } misc_204; - -/* Control and Status 0x208 to 0x21c */ -/* Gross enable and disable control */ - struct { - u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */ - u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */ - u32 PCR_filter_sig : 1; /* PCR PID filter */ - u32 PMT_filter_sig : 1; /* PMT PID filter */ - - u32 EMM_filter_sig : 1; /* EMM PID filter */ - u32 ECM_filter_sig : 1; /* ECM PID filter */ - u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */ - u32 Mask_filter_sig : 1; /* mask PID filter */ - - u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */ - u32 WAN_CA_Enable_sig : 1; /* not in FCIII */ - u32 CA_Enable_sig : 1; /* not in FCIII */ - u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */ - - u32 Per_CA_Enable_sig : 1; /* not in FCIII */ - u32 Multi2_Enable_sig : 1; /* ? */ - u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */ - u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will - examine and process packets according to all other (individual) PID - filtering controls. If it a zero, no packet processing of any kind will - take place. All data from the tuner will be thrown away. */ - - u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI - * interrupt after the specified count for filling the buffer. */ - u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt - after a specified amount of time. */ - u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */ - u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */ - - u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */ - u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */ - u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the - PCI host to indicate that mailbox data is available. */ - - u32 unused : 9; - } ctrl_208; - -/* General status. When a PCI interrupt occurs, this register is read to - * discover the reason for the interrupt. - */ - struct { - u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */ - u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */ - u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */ - u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */ - u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */ - u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/ - u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */ - u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */ - u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */ - u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */ - u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */ - u32 reserved :21; - } irq_20c; - - -/* Software reset register */ - struct { - u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00. - Each bit location represents a 0x100 block of registers. Writing - a one in a bit location resets that block of registers and the logic - that it controls. */ - u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */ - u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A; - Turns off pci encryption => 0xC259 Note: pci_encryption default - at power-up is ON. */ - } sw_reset_210; - - struct { - u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART - (RS-232 Smart Card interface). When set, the IBI interface - defined by register 0x600 controls the serial UART. */ - u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line - Serial Master EEPROM target. When set, the Two-line Serial Master - EEPROM target interface is controlled by IBI register 0x100. */ - u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space - bus masters. Once this signal is cleared, normal V8-space - operations resume. */ - u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry - to process section packed transport streams. */ - u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data - within the FlexCop3 front end circuitry is converted from a serial - stream into parallel data before downstream processing otherwise - interprets the data. */ - u32 unused1 : 3; - u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream CLOCK signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream VALID signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream SYNC signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream ERROR signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 unused2 :20; - } misc_214; - -/* Mailbox from V8 to host */ - struct { - u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an - end host, an interrupt is generated to the PCI host to indicate - that mailbox data is available. Reading register 20c will clear - the IRQ. */ - } mbox_v8_to_host_218; - -/* Mailbox from host to v8 Mailbox_to_V8 - * Mailbox_to_V8 mailbox storage register - * used to send messages from PCI to V8. Writing to this register will send an - * IRQ to the V8. Then it can read the data from here. Reading this register - * will clear the IRQ. If the V8 is halted and bit 31 of this register is set, - * then this register is used instead as a direct interface to access the - * V8space memory. - */ - struct { - u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */ - u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */ - u32 unused : 7; - u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */ - u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows - this IBI register interface to directly drive the V8-space memory. */ - } mbox_host_to_v8_21c; - - -/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */ - struct { - u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally - hold the PID value for the desired network stream. */ - u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */ - u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */ - u32 debug_flag_pid_saved : 1; - u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */ - u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in - Stream2_PID TS packets. */ - u32 debug_flag_write_status00 : 1; - u32 debug_fifo_problem : 1; - } pid_filter_300; - - struct { - u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */ - u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 debug_overrun3 : 1; - u32 debug_overrun2 : 1; - u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */ - u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 reserved : 2; - } pid_filter_304; - - struct { - u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for - conditional access-related data. */ - u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the - first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */ - u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users - complete 6-byte Smart Card ID number. */ - u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional - access-related data. */ - u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 reserved : 2; - } pid_filter_308; - - struct { - u32 Group_PID :13; /* PID value for group filtering. */ - u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 unused1 : 2; - u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */ - u32 unused2 : 3; - } pid_filter_30c_ext_ind_0_7; - - struct { - u32 net_master_read :17; - u32 unused :15; - } pid_filter_30c_ext_ind_1; - - struct { - u32 net_master_write :17; - u32 unused :15; - } pid_filter_30c_ext_ind_2; - - struct { - u32 next_net_master_write :17; - u32 unused :15; - } pid_filter_30c_ext_ind_3; - - struct { - u32 unused1 : 1; - u32 state_write :10; - u32 reserved1 : 6; /* default: 000100 */ - u32 stack_read :10; - u32 reserved2 : 5; /* default: 00100 */ - } pid_filter_30c_ext_ind_4; - - struct { - u32 stack_cnt :10; - u32 unused :22; - } pid_filter_30c_ext_ind_5; - - struct { - u32 pid_fsm_save_reg0 : 2; - u32 pid_fsm_save_reg1 : 2; - u32 pid_fsm_save_reg2 : 2; - u32 pid_fsm_save_reg3 : 2; - u32 pid_fsm_save_reg4 : 2; - u32 pid_fsm_save_reg300 : 2; - u32 write_status1 : 2; - u32 write_status4 : 2; - u32 data_size_reg :12; - u32 unused : 4; - } pid_filter_30c_ext_ind_6; - - struct { - u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code - representing one of 32 internal PIDn registers as well as its - corresponding internal MAC_lown register. */ - u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */ - u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register - 0=MAC_highB register, 1=MAC_highA */ - u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400. - All types of networks (DVB, ATSC, ISDB) are passed. */ - u32 unused :22; - } index_reg_310; - - struct { - u32 PID :13; /* PID value */ - u32 PID_trans : 1; /* translation will take place for packets filtered */ - u32 PID_enable_bit : 1; /* When set this PID filter is enabled */ - u32 reserved :17; - } pid_n_reg_314; - - struct { - u32 A4_byte : 8; - u32 A5_byte : 8; - u32 A6_byte : 8; - u32 Enable_bit : 1; /* enabled (1) or disabled (1) */ - u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */ - u32 reserved : 6; - } mac_low_reg_318; - - struct { - u32 A1_byte : 8; - u32 A2_byte : 8; - u32 A3_byte : 8; - u32 reserved : 8; - } mac_high_reg_31c; - -/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */ - struct { - u32 reserved :16; #define fc_data_Tag_ID_DVB 0x3e #define fc_data_Tag_ID_ATSC 0x3f #define fc_data_Tag_ID_IDSB 0x8b - u32 data_Tag_ID :16; - } data_tag_400; - - struct { - u32 Card_IDbyte6 : 8; - u32 Card_IDbyte5 : 8; - u32 Card_IDbyte4 : 8; - u32 Card_IDbyte3 : 8; - } card_id_408; - - struct { - u32 Card_IDbyte2 : 8; - u32 Card_IDbyte1 : 8; - } card_id_40c; - - /* holding the unique mac address of the receiver which houses the FlexCopIII */ - struct { - u32 MAC1 : 8; - u32 MAC2 : 8; - u32 MAC3 : 8; - u32 MAC6 : 8; - } mac_address_418; - - struct { - u32 MAC7 : 8; - u32 MAC8 : 8; - u32 reserved : 16; - } mac_address_41c; - - struct { - u32 transmitter_data_byte : 8; - u32 ReceiveDataReady : 1; - u32 ReceiveByteFrameError: 1; - u32 txbuffempty : 1; - u32 reserved :21; - } ci_600; - - struct { - u32 pi_d : 8; - u32 pi_ha :20; - u32 pi_rw : 1; - u32 pi_component_reg : 3; - } pi_604; - - struct { - u32 serialReset : 1; - u32 oncecycle_read : 1; - u32 Timer_Read_req : 1; - u32 Timer_Load_req : 1; - u32 timer_data : 7; - u32 unused : 1; /* ??? not mentioned in data book */ - u32 Timer_addr : 5; - u32 reserved : 3; - u32 pcmcia_a_mod_pwr_n : 1; - u32 pcmcia_b_mod_pwr_n : 1; - u32 config_Done_stat : 1; - u32 config_Init_stat : 1; - u32 config_Prog_n : 1; - u32 config_wr_n : 1; - u32 config_cs_n : 1; - u32 config_cclk : 1; - u32 pi_CiMax_IRQ_n : 1; - u32 pi_timeout_status : 1; - u32 pi_wait_n : 1; - u32 pi_busy_n : 1; - } pi_608; - struct { - u32 PID :13; - u32 key_enable : 1; #define fc_key_code_default 0x1 #define fc_key_code_even 0x2 #define fc_key_code_odd 0x3 - u32 key_code : 2; - u32 key_array_col : 3; - u32 key_array_row : 5; - u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */ - u32 rw_flag : 1; - u32 reserved : 6; - } dvb_reg_60c; - -/* SRAM and Output Destination 0x700 to 0x714 */ - struct { - u32 sram_addr :15; - u32 sram_rw : 1; /* 0=write, 1=read */ - u32 sram_data : 8; - u32 sc_xfer_bit : 1; - u32 reserved1 : 3; - u32 oe_pin_reg : 1; - u32 ce_pin_reg : 1; - u32 reserved2 : 1; - u32 start_sram_ibi : 1; - } sram_ctrl_reg_700; - - struct { - u32 net_addr_read :16; - u32 net_addr_write :16; - } net_buf_reg_704; - - struct { - u32 cai_read :11; - u32 reserved1 : 5; - u32 cai_write :11; - u32 reserved2 : 6; - u32 cai_cnt : 4; - } cai_buf_reg_708; - - struct { - u32 cao_read :11; - u32 reserved1 : 5; - u32 cap_write :11; - u32 reserved2 : 6; - u32 cao_cnt : 4; - } cao_buf_reg_70c; - - struct { - u32 media_read :11; - u32 reserved1 : 5; - u32 media_write :11; - u32 reserved2 : 6; - u32 media_cnt : 4; - } media_buf_reg_710; - - struct { - u32 NET_Dest : 2; - u32 CAI_Dest : 2; - u32 CAO_Dest : 2; - u32 MEDIA_Dest : 2; - u32 net_ovflow_error : 1; - u32 media_ovflow_error : 1; - u32 cai_ovflow_error : 1; - u32 cao_ovflow_error : 1; - u32 ctrl_usb_wan : 1; - u32 ctrl_sramdma : 1; - u32 ctrl_maximumfill : 1; - u32 reserved :17; - } sram_dest_reg_714; - - struct { - u32 net_cnt :12; - u32 reserved1 : 4; - u32 net_addr_read : 1; - u32 reserved2 : 3; - u32 net_addr_write : 1; - u32 reserved3 :11; - } net_buf_reg_718; - - struct { - u32 wan_speed_sig : 2; - u32 reserved1 : 6; - u32 wan_wait_state : 8; - u32 sram_chip : 2; - u32 sram_memmap : 2; - u32 reserved2 : 4; - u32 wan_pkt_frame : 4; - u32 reserved3 : 4; - } wan_ctrl_reg_71c; -} flexcop_ibi_value; extern flexcop_ibi_value ibi_zero; diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 0113449abd1..0a78ba3737a 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -545,7 +545,7 @@ static struct usb_device_id flexcop_usb_table [] = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver flexcop_usb_driver = { .owner = THIS_MODULE, - .name = "Technisat/B2C2 FlexCop II/IIb/III USB", + .name = "b2c2_flexcop_usb", .probe = flexcop_usb_probe, .disconnect = flexcop_usb_disconnect, .id_table = flexcop_usb_table, diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 8b5d14dd36e..12873d43540 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -46,7 +46,7 @@ int b2c2_flexcop_debug; module_param_named(debug, b2c2_flexcop_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); #undef DEBSTATUS /* global zero for ibi values */ @@ -173,9 +173,20 @@ static void flexcop_reset(struct flexcop_device *fc) fc->write_ibi_reg(fc,ctrl_208,ibi_zero); v210.raw = 0; - v210.sw_reset_210.reset_blocks = 0xff; + v210.sw_reset_210.reset_block_000 = 1; + v210.sw_reset_210.reset_block_100 = 1; + v210.sw_reset_210.reset_block_200 = 1; + v210.sw_reset_210.reset_block_300 = 1; + v210.sw_reset_210.reset_block_400 = 1; + v210.sw_reset_210.reset_block_500 = 1; + v210.sw_reset_210.reset_block_600 = 1; + v210.sw_reset_210.reset_block_700 = 1; v210.sw_reset_210.Block_reset_enable = 0xb2; + + v210.sw_reset_210.Special_controls = 0xc259; + fc->write_ibi_reg(fc,sw_reset_210,v210); + msleep(1); /* reset the periphical devices */ @@ -186,6 +197,25 @@ static void flexcop_reset(struct flexcop_device *fc) fc->write_ibi_reg(fc,misc_204,v204); } +void flexcop_reset_block_300(struct flexcop_device *fc) +{ + flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208), + v210 = fc->read_ibi_reg(fc,sw_reset_210); + + deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw); + + fc->write_ibi_reg(fc,ctrl_208,ibi_zero); + + v210.sw_reset_210.reset_block_300 = 1; + v210.sw_reset_210.Block_reset_enable = 0xb2; + + fc->write_ibi_reg(fc,sw_reset_210,v210); + msleep(1); + + fc->write_ibi_reg(fc,ctrl_208,v208_save); +} +EXPORT_SYMBOL(flexcop_reset_block_300); + struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) { void *bus; diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h index caa343a97bd..0cebe1d92e0 100644 --- a/drivers/media/dvb/b2c2/flexcop.h +++ b/drivers/media/dvb/b2c2/flexcop.h @@ -26,5 +26,6 @@ extern int b2c2_flexcop_debug; #define deb_i2c(args...) dprintk(0x04,args) #define deb_ts(args...) dprintk(0x08,args) #define deb_sram(args...) dprintk(0x10,args) +#define deb_rdump(args...) dprintk(0x20,args) #endif diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h new file mode 100644 index 00000000000..ed9a6756b19 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h @@ -0,0 +1,458 @@ +/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * register descriptions + * + * see flexcop.c for copyright information. + */ + +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_address0 :30; + u32 dma_0No_update : 1; + u32 dma_0start : 1; + } dma_0x0; + + struct { + u32 dma_addr_size :24; + u32 DMA_maxpackets : 8; + } dma_0x4_remap; + + struct { + u32 dma_addr_size :24; + u32 unused : 1; + u32 dma1timer : 7; + } dma_0x4_read; + + struct { + u32 dma_addr_size :24; + u32 dmatimer : 7; + u32 unused : 1; + } dma_0x4_write; + + struct { + u32 dma_cur_addr :30; + u32 unused : 2; + } dma_0x8; + + struct { + u32 dma_address1 :30; + u32 remap_enable : 1; + u32 dma_1start : 1; + } dma_0xc; + + struct { + u32 st_done : 1; + u32 no_base_addr_ack_error : 1; + u32 twoWS_port_reg : 2; + u32 total_bytes : 2; + u32 twoWS_rw : 1; + u32 working_start : 1; + u32 data1_reg : 8; + u32 baseaddr : 8; + u32 reserved1 : 1; + u32 chipaddr : 7; + } tw_sm_c_100; + + struct { + u32 unused : 6; + u32 force_stop : 1; + u32 exlicit_stops : 1; + u32 data4_reg : 8; + u32 data3_reg : 8; + u32 data2_reg : 8; + } tw_sm_c_104; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_108; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_10c; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_110; + + struct { + u32 LNB_CTLPrescaler_sig : 2; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLHighCount_sig :15; + } lnb_switch_freq_200; + + struct { + u32 Rev_N_sig_reserved2 : 1; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_revision_hi : 4; + u32 reserved :20; + u32 Per_reset_sig : 1; + u32 LNB_L_H_sig : 1; + u32 ACPI3_sig : 1; + u32 ACPI1_sig : 1; + } misc_204; + + struct { + u32 unused : 9; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 Rcv_Data_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 WAN_Enable_sig : 1; + u32 Mask_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 Stream1_filter_sig : 1; + } ctrl_208; + + struct { + u32 reserved :21; + u32 Transport_Error : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Continuity_error_flag : 1; + u32 Data_receiver_error : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA1_IRQ_Status : 1; + } irq_20c; + + struct { + u32 Special_controls :16; + u32 Block_reset_enable : 8; + u32 reset_block_700 : 1; + u32 reset_block_600 : 1; + u32 reset_block_500 : 1; + u32 reset_block_400 : 1; + u32 reset_block_300 : 1; + u32 reset_block_200 : 1; + u32 reset_block_100 : 1; + u32 reset_block_000 : 1; + } sw_reset_210; + + struct { + u32 unused2 :20; + u32 polarity_PS_ERR_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_CLK_sig : 1; + u32 unused1 : 3; + u32 s2p_sel_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 halt_V8_sig : 1; + u32 v2WS_oe_sig : 1; + u32 vuart_oe_sig : 1; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_busmuster : 1; + u32 sysramaccess_write : 1; + u32 unused : 7; + u32 sysramaccess_addr :15; + u32 sysramaccess_data : 8; + } mbox_host_to_v8_21c; + + struct { + u32 debug_fifo_problem : 1; + u32 debug_flag_write_status00 : 1; + u32 Stream2_trans : 1; + u32 Stream2_PID :13; + u32 debug_flag_pid_saved : 1; + u32 MAC_Multicast_filter : 1; + u32 Stream1_trans : 1; + u32 Stream1_PID :13; + } pid_filter_300; + + struct { + u32 reserved : 2; + u32 PMT_trans : 1; + u32 PMT_PID :13; + u32 debug_overrun2 : 1; + u32 debug_overrun3 : 1; + u32 PCR_trans : 1; + u32 PCR_PID :13; + } pid_filter_304; + + struct { + u32 reserved : 2; + u32 ECM_trans : 1; + u32 ECM_PID :13; + u32 EMM_filter_6 : 1; + u32 EMM_filter_4 : 1; + u32 EMM_trans : 1; + u32 EMM_PID :13; + } pid_filter_308; + + struct { + u32 unused2 : 3; + u32 Group_mask :13; + u32 unused1 : 2; + u32 Group_trans : 1; + u32 Group_PID :13; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 unused :15; + u32 net_master_read :17; + } pid_filter_30c_ext_ind_1; + + struct { + u32 unused :15; + u32 net_master_write :17; + } pid_filter_30c_ext_ind_2; + + struct { + u32 unused :15; + u32 next_net_master_write :17; + } pid_filter_30c_ext_ind_3; + + struct { + u32 reserved2 : 5; + u32 stack_read :10; + u32 reserved1 : 6; + u32 state_write :10; + u32 unused1 : 1; + } pid_filter_30c_ext_ind_4; + + struct { + u32 unused :22; + u32 stack_cnt :10; + } pid_filter_30c_ext_ind_5; + + struct { + u32 unused : 4; + u32 data_size_reg :12; + u32 write_status4 : 2; + u32 write_status1 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg0 : 2; + } pid_filter_30c_ext_ind_6; + + struct { + u32 unused :22; + u32 pass_alltables : 1; + u32 AB_select : 1; + u32 extra_index_reg : 3; + u32 index_reg : 5; + } index_reg_310; + + struct { + u32 reserved :17; + u32 PID_enable_bit : 1; + u32 PID_trans : 1; + u32 PID :13; + } pid_n_reg_314; + + struct { + u32 reserved : 6; + u32 HighAB_bit : 1; + u32 Enable_bit : 1; + u32 A6_byte : 8; + u32 A5_byte : 8; + u32 A4_byte : 8; + } mac_low_reg_318; + + struct { + u32 reserved : 8; + u32 A3_byte : 8; + u32 A2_byte : 8; + u32 A1_byte : 8; + } mac_high_reg_31c; + + struct { + u32 data_Tag_ID :16; + u32 reserved :16; + } data_tag_400; + + struct { + u32 Card_IDbyte3 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte6 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte1 : 8; + u32 Card_IDbyte2 : 8; + } card_id_40c; + + struct { + u32 MAC6 : 8; + u32 MAC3 : 8; + u32 MAC2 : 8; + u32 MAC1 : 8; + } mac_address_418; + + struct { + u32 reserved :16; + u32 MAC8 : 8; + u32 MAC7 : 8; + } mac_address_41c; + + struct { + u32 reserved :21; + u32 txbuffempty : 1; + u32 ReceiveByteFrameError : 1; + u32 ReceiveDataReady : 1; + u32 transmitter_data_byte : 8; + } ci_600; + + struct { + u32 pi_component_reg : 3; + u32 pi_rw : 1; + u32 pi_ha :20; + u32 pi_d : 8; + } pi_604; + + struct { + u32 pi_busy_n : 1; + u32 pi_wait_n : 1; + u32 pi_timeout_status : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 config_cclk : 1; + u32 config_cs_n : 1; + u32 config_wr_n : 1; + u32 config_Prog_n : 1; + u32 config_Init_stat : 1; + u32 config_Done_stat : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 pcmcia_a_mod_pwr_n : 1; + u32 reserved : 3; + u32 Timer_addr : 5; + u32 unused : 1; + u32 timer_data : 7; + u32 Timer_Load_req : 1; + u32 Timer_Read_req : 1; + u32 oncecycle_read : 1; + u32 serialReset : 1; + } pi_608; + + struct { + u32 reserved : 6; + u32 rw_flag : 1; + u32 dvb_en : 1; + u32 key_array_row : 5; + u32 key_array_col : 3; + u32 key_code : 2; + u32 key_enable : 1; + u32 PID :13; + } dvb_reg_60c; + + struct { + u32 start_sram_ibi : 1; + u32 reserved2 : 1; + u32 ce_pin_reg : 1; + u32 oe_pin_reg : 1; + u32 reserved1 : 3; + u32 sc_xfer_bit : 1; + u32 sram_data : 8; + u32 sram_rw : 1; + u32 sram_addr :15; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_write :16; + u32 net_addr_read :16; + } net_buf_reg_704; + + struct { + u32 cai_cnt : 4; + u32 reserved2 : 6; + u32 cai_write :11; + u32 reserved1 : 5; + u32 cai_read :11; + } cai_buf_reg_708; + + struct { + u32 cao_cnt : 4; + u32 reserved2 : 6; + u32 cap_write :11; + u32 reserved1 : 5; + u32 cao_read :11; + } cao_buf_reg_70c; + + struct { + u32 media_cnt : 4; + u32 reserved2 : 6; + u32 media_write :11; + u32 reserved1 : 5; + u32 media_read :11; + } media_buf_reg_710; + + struct { + u32 reserved :17; + u32 ctrl_maximumfill : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_usb_wan : 1; + u32 cao_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 net_ovflow_error : 1; + u32 MEDIA_Dest : 2; + u32 CAO_Dest : 2; + u32 CAI_Dest : 2; + u32 NET_Dest : 2; + } sram_dest_reg_714; + + struct { + u32 reserved3 :11; + u32 net_addr_write : 1; + u32 reserved2 : 3; + u32 net_addr_read : 1; + u32 reserved1 : 4; + u32 net_cnt :12; + } net_buf_reg_718; + + struct { + u32 reserved3 : 4; + u32 wan_pkt_frame : 4; + u32 reserved2 : 4; + u32 sram_memmap : 2; + u32 sram_chip : 2; + u32 wan_wait_state : 8; + u32 reserved1 : 6; + u32 wan_speed_sig : 2; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h new file mode 100644 index 00000000000..49f2315b6e5 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h @@ -0,0 +1,458 @@ +/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * register descriptions + * + * see flexcop.c for copyright information. + */ + +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_0start : 1; + u32 dma_0No_update : 1; + u32 dma_address0 :30; + } dma_0x0; + + struct { + u32 DMA_maxpackets : 8; + u32 dma_addr_size :24; + } dma_0x4_remap; + + struct { + u32 dma1timer : 7; + u32 unused : 1; + u32 dma_addr_size :24; + } dma_0x4_read; + + struct { + u32 unused : 1; + u32 dmatimer : 7; + u32 dma_addr_size :24; + } dma_0x4_write; + + struct { + u32 unused : 2; + u32 dma_cur_addr :30; + } dma_0x8; + + struct { + u32 dma_1start : 1; + u32 remap_enable : 1; + u32 dma_address1 :30; + } dma_0xc; + + struct { + u32 chipaddr : 7; + u32 reserved1 : 1; + u32 baseaddr : 8; + u32 data1_reg : 8; + u32 working_start : 1; + u32 twoWS_rw : 1; + u32 total_bytes : 2; + u32 twoWS_port_reg : 2; + u32 no_base_addr_ack_error : 1; + u32 st_done : 1; + } tw_sm_c_100; + + struct { + u32 data2_reg : 8; + u32 data3_reg : 8; + u32 data4_reg : 8; + u32 exlicit_stops : 1; + u32 force_stop : 1; + u32 unused : 6; + } tw_sm_c_104; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_108; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_10c; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_110; + + struct { + u32 LNB_CTLHighCount_sig :15; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLPrescaler_sig : 2; + } lnb_switch_freq_200; + + struct { + u32 ACPI1_sig : 1; + u32 ACPI3_sig : 1; + u32 LNB_L_H_sig : 1; + u32 Per_reset_sig : 1; + u32 reserved :20; + u32 Rev_N_sig_revision_hi : 4; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved2 : 1; + } misc_204; + + struct { + u32 Stream1_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 Mask_filter_sig : 1; + u32 WAN_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Rcv_Data_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 unused : 9; + } ctrl_208; + + struct { + u32 DMA1_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 Data_receiver_error : 1; + u32 Continuity_error_flag : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Transport_Error : 1; + u32 reserved :21; + } irq_20c; + + struct { + u32 reset_block_000 : 1; + u32 reset_block_100 : 1; + u32 reset_block_200 : 1; + u32 reset_block_300 : 1; + u32 reset_block_400 : 1; + u32 reset_block_500 : 1; + u32 reset_block_600 : 1; + u32 reset_block_700 : 1; + u32 Block_reset_enable : 8; + u32 Special_controls :16; + } sw_reset_210; + + struct { + u32 vuart_oe_sig : 1; + u32 v2WS_oe_sig : 1; + u32 halt_V8_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 s2p_sel_sig : 1; + u32 unused1 : 3; + u32 polarity_PS_CLK_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_ERR_sig : 1; + u32 unused2 :20; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_data : 8; + u32 sysramaccess_addr :15; + u32 unused : 7; + u32 sysramaccess_write : 1; + u32 sysramaccess_busmuster : 1; + } mbox_host_to_v8_21c; + + struct { + u32 Stream1_PID :13; + u32 Stream1_trans : 1; + u32 MAC_Multicast_filter : 1; + u32 debug_flag_pid_saved : 1; + u32 Stream2_PID :13; + u32 Stream2_trans : 1; + u32 debug_flag_write_status00 : 1; + u32 debug_fifo_problem : 1; + } pid_filter_300; + + struct { + u32 PCR_PID :13; + u32 PCR_trans : 1; + u32 debug_overrun3 : 1; + u32 debug_overrun2 : 1; + u32 PMT_PID :13; + u32 PMT_trans : 1; + u32 reserved : 2; + } pid_filter_304; + + struct { + u32 EMM_PID :13; + u32 EMM_trans : 1; + u32 EMM_filter_4 : 1; + u32 EMM_filter_6 : 1; + u32 ECM_PID :13; + u32 ECM_trans : 1; + u32 reserved : 2; + } pid_filter_308; + + struct { + u32 Group_PID :13; + u32 Group_trans : 1; + u32 unused1 : 2; + u32 Group_mask :13; + u32 unused2 : 3; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 net_master_read :17; + u32 unused :15; + } pid_filter_30c_ext_ind_1; + + struct { + u32 net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_2; + + struct { + u32 next_net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_3; + + struct { + u32 unused1 : 1; + u32 state_write :10; + u32 reserved1 : 6; + u32 stack_read :10; + u32 reserved2 : 5; + } pid_filter_30c_ext_ind_4; + + struct { + u32 stack_cnt :10; + u32 unused :22; + } pid_filter_30c_ext_ind_5; + + struct { + u32 pid_fsm_save_reg0 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 write_status1 : 2; + u32 write_status4 : 2; + u32 data_size_reg :12; + u32 unused : 4; + } pid_filter_30c_ext_ind_6; + + struct { + u32 index_reg : 5; + u32 extra_index_reg : 3; + u32 AB_select : 1; + u32 pass_alltables : 1; + u32 unused :22; + } index_reg_310; + + struct { + u32 PID :13; + u32 PID_trans : 1; + u32 PID_enable_bit : 1; + u32 reserved :17; + } pid_n_reg_314; + + struct { + u32 A4_byte : 8; + u32 A5_byte : 8; + u32 A6_byte : 8; + u32 Enable_bit : 1; + u32 HighAB_bit : 1; + u32 reserved : 6; + } mac_low_reg_318; + + struct { + u32 A1_byte : 8; + u32 A2_byte : 8; + u32 A3_byte : 8; + u32 reserved : 8; + } mac_high_reg_31c; + + struct { + u32 reserved :16; + u32 data_Tag_ID :16; + } data_tag_400; + + struct { + u32 Card_IDbyte6 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte3 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte2 : 8; + u32 Card_IDbyte1 : 8; + } card_id_40c; + + struct { + u32 MAC1 : 8; + u32 MAC2 : 8; + u32 MAC3 : 8; + u32 MAC6 : 8; + } mac_address_418; + + struct { + u32 MAC7 : 8; + u32 MAC8 : 8; + u32 reserved :16; + } mac_address_41c; + + struct { + u32 transmitter_data_byte : 8; + u32 ReceiveDataReady : 1; + u32 ReceiveByteFrameError : 1; + u32 txbuffempty : 1; + u32 reserved :21; + } ci_600; + + struct { + u32 pi_d : 8; + u32 pi_ha :20; + u32 pi_rw : 1; + u32 pi_component_reg : 3; + } pi_604; + + struct { + u32 serialReset : 1; + u32 oncecycle_read : 1; + u32 Timer_Read_req : 1; + u32 Timer_Load_req : 1; + u32 timer_data : 7; + u32 unused : 1; + u32 Timer_addr : 5; + u32 reserved : 3; + u32 pcmcia_a_mod_pwr_n : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 config_Done_stat : 1; + u32 config_Init_stat : 1; + u32 config_Prog_n : 1; + u32 config_wr_n : 1; + u32 config_cs_n : 1; + u32 config_cclk : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 pi_timeout_status : 1; + u32 pi_wait_n : 1; + u32 pi_busy_n : 1; + } pi_608; + + struct { + u32 PID :13; + u32 key_enable : 1; + u32 key_code : 2; + u32 key_array_col : 3; + u32 key_array_row : 5; + u32 dvb_en : 1; + u32 rw_flag : 1; + u32 reserved : 6; + } dvb_reg_60c; + + struct { + u32 sram_addr :15; + u32 sram_rw : 1; + u32 sram_data : 8; + u32 sc_xfer_bit : 1; + u32 reserved1 : 3; + u32 oe_pin_reg : 1; + u32 ce_pin_reg : 1; + u32 reserved2 : 1; + u32 start_sram_ibi : 1; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_read :16; + u32 net_addr_write :16; + } net_buf_reg_704; + + struct { + u32 cai_read :11; + u32 reserved1 : 5; + u32 cai_write :11; + u32 reserved2 : 6; + u32 cai_cnt : 4; + } cai_buf_reg_708; + + struct { + u32 cao_read :11; + u32 reserved1 : 5; + u32 cap_write :11; + u32 reserved2 : 6; + u32 cao_cnt : 4; + } cao_buf_reg_70c; + + struct { + u32 media_read :11; + u32 reserved1 : 5; + u32 media_write :11; + u32 reserved2 : 6; + u32 media_cnt : 4; + } media_buf_reg_710; + + struct { + u32 NET_Dest : 2; + u32 CAI_Dest : 2; + u32 CAO_Dest : 2; + u32 MEDIA_Dest : 2; + u32 net_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 cao_ovflow_error : 1; + u32 ctrl_usb_wan : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_maximumfill : 1; + u32 reserved :17; + } sram_dest_reg_714; + + struct { + u32 net_cnt :12; + u32 reserved1 : 4; + u32 net_addr_read : 1; + u32 reserved2 : 3; + u32 net_addr_write : 1; + u32 reserved3 :11; + } net_buf_reg_718; + + struct { + u32 wan_speed_sig : 2; + u32 reserved1 : 6; + u32 wan_wait_state : 8; + u32 sram_chip : 2; + u32 sram_memmap : 2; + u32 reserved2 : 4; + u32 wan_pkt_frame : 4; + u32 reserved3 : 4; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff --git a/drivers/media/dvb/b2c2/skystar2.c b/drivers/media/dvb/b2c2/skystar2.c deleted file mode 100644 index acbc4c34f72..00000000000 --- a/drivers/media/dvb/b2c2/skystar2.c +++ /dev/null @@ -1,2644 +0,0 @@ -/* - * skystar2.c - driver for the Technisat SkyStar2 PCI DVB card - * based on the FlexCopII by B2C2,Inc. - * - * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc - * - * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl() - * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped - * Vincenzo Di Massa, hawk.it at tiscalinet.it - * - * Converted to Linux coding style - * Misc reorganization, polishing, restyling - * Roberto Ragusa, skystar2-c5b8 at robertoragusa dot it - * - * Added hardware filtering support, - * Niklas Peinecke, peinecke at gdv.uni-hannover.de - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/version.h> - -#include <asm/io.h> - -#include "dvb_frontend.h" - -#include <linux/dvb/frontend.h> -#include <linux/dvb/dmx.h> -#include "dvb_demux.h" -#include "dmxdev.h" -#include "dvb_filter.h" -#include "dvbdev.h" -#include "demux.h" -#include "dvb_net.h" -#include "stv0299.h" -#include "mt352.h" -#include "mt312.h" -#include "nxt2002.h" - -static int debug; -static int enable_hw_filters = 2; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Set debugging level (0 = default, 1 = most messages, 2 = all messages)."); -module_param(enable_hw_filters, int, 0444); -MODULE_PARM_DESC(enable_hw_filters, "enable hardware filters: supported values: 0 (none), 1, 2"); - -#define dprintk(x...) do { if (debug>=1) printk(x); } while (0) -#define ddprintk(x...) do { if (debug>=2) printk(x); } while (0) - -#define SIZE_OF_BUF_DMA1 0x3ac00 -#define SIZE_OF_BUF_DMA2 0x758 - -#define MAX_N_HW_FILTERS (6+32) -#define N_PID_SLOTS 256 - -struct dmaq { - u32 bus_addr; - u32 head; - u32 tail; - u32 buffer_size; - u8 *buffer; -}; - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9) -#define __iomem -#endif - -struct adapter { - struct pci_dev *pdev; - - u8 card_revision; - u32 b2c2_revision; - u32 pid_filter_max; - u32 mac_filter_max; - u32 irq; - void __iomem *io_mem; - unsigned long io_port; - u8 mac_addr[8]; - u32 dw_sram_type; - - struct dvb_adapter dvb_adapter; - struct dvb_demux demux; - struct dmxdev dmxdev; - struct dmx_frontend hw_frontend; - struct dmx_frontend mem_frontend; - struct i2c_adapter i2c_adap; - struct dvb_net dvbnet; - - struct semaphore i2c_sem; - - struct dmaq dmaq1; - struct dmaq dmaq2; - - u32 dma_ctrl; - u32 dma_status; - - int capturing; - - spinlock_t lock; - - int useable_hw_filters; - u16 hw_pids[MAX_N_HW_FILTERS]; - u16 pid_list[N_PID_SLOTS]; - int pid_rc[N_PID_SLOTS]; // ref counters for the pids - int pid_count; - int whole_bandwidth_count; - u32 mac_filter; - - struct dvb_frontend* fe; - int (*fe_sleep)(struct dvb_frontend* fe); -}; - -#define write_reg_dw(adapter,reg,value) writel(value, adapter->io_mem + reg) -#define read_reg_dw(adapter,reg) readl(adapter->io_mem + reg) - -static void write_reg_bitfield(struct adapter *adapter, u32 reg, u32 zeromask, u32 orvalue) -{ - u32 tmp; - - tmp = read_reg_dw(adapter, reg); - tmp = (tmp & ~zeromask) | orvalue; - write_reg_dw(adapter, reg, tmp); -} - -/* i2c functions */ -static int i2c_main_write_for_flex2(struct adapter *adapter, u32 command, u8 *buf, int retries) -{ - int i; - u32 value; - - write_reg_dw(adapter, 0x100, 0); - write_reg_dw(adapter, 0x100, command); - - for (i = 0; i < retries; i++) { - value = read_reg_dw(adapter, 0x100); - - if ((value & 0x40000000) == 0) { - if ((value & 0x81000000) == 0x80000000) { - if (buf != 0) - *buf = (value >> 0x10) & 0xff; - - return 1; - } - } else { - write_reg_dw(adapter, 0x100, 0); - write_reg_dw(adapter, 0x100, command); - } - } - - return 0; -} - -/* device = 0x10000000 for tuner, 0x20000000 for eeprom */ -static void i2c_main_setup(u32 device, u32 chip_addr, u8 op, u8 addr, u32 value, u32 len, u32 *command) -{ - *command = device | ((len - 1) << 26) | (value << 16) | (addr << 8) | chip_addr; - - if (op != 0) - *command = *command | 0x03000000; - else - *command = *command | 0x01000000; -} - -static int flex_i2c_read4(struct adapter *adapter, u32 device, u32 chip_addr, u16 addr, u8 *buf, u8 len) -{ - u32 command; - u32 value; - - int result, i; - - i2c_main_setup(device, chip_addr, 1, addr, 0, len, &command); - - result = i2c_main_write_for_flex2(adapter, command, buf, 100000); - - if ((result & 0xff) != 0) { - if (len > 1) { - value = read_reg_dw(adapter, 0x104); - - for (i = 1; i < len; i++) { - buf[i] = value & 0xff; - value = value >> 8; - } - } - } - - return result; -} - -static int flex_i2c_write4(struct adapter *adapter, u32 device, u32 chip_addr, u32 addr, u8 *buf, u8 len) -{ - u32 command; - u32 value; - int i; - - if (len > 1) { - value = 0; - - for (i = len; i > 1; i--) { - value = value << 8; - value = value | buf[i - 1]; - } - - write_reg_dw(adapter, 0x104, value); - } - - i2c_main_setup(device, chip_addr, 0, addr, buf[0], len, &command); - - return i2c_main_write_for_flex2(adapter, command, NULL, 100000); -} - -static void fixchipaddr(u32 device, u32 bus, u32 addr, u32 *ret) -{ - if (device == 0x20000000) - *ret = bus | ((addr >> 8) & 3); - else - *ret = bus; -} - -static u32 flex_i2c_read(struct adapter *adapter, u32 device, u32 bus, u32 addr, u8 *buf, u32 len) -{ - u32 chipaddr; - u32 bytes_to_transfer; - u8 *start; - - ddprintk("%s:\n", __FUNCTION__); - - start = buf; - - while (len != 0) { - bytes_to_transfer = len; - - if (bytes_to_transfer > 4) - bytes_to_transfer = 4; - - fixchipaddr(device, bus, addr, &chipaddr); - - if (flex_i2c_read4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0) - return buf - start; - - buf = buf + bytes_to_transfer; - addr = addr + bytes_to_transfer; - len = len - bytes_to_transfer; - }; - - return buf - start; -} - -static u32 flex_i2c_write(struct adapter *adapter, u32 device, u32 bus, u32 addr, u8 *buf, u32 len) -{ - u32 chipaddr; - u32 bytes_to_transfer; - u8 *start; - - ddprintk("%s:\n", __FUNCTION__); - - start = buf; - - while (len != 0) { - bytes_to_transfer = len; - - if (bytes_to_transfer > 4) - bytes_to_transfer = 4; - - fixchipaddr(device, bus, addr, &chipaddr); - - if (flex_i2c_write4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0) - return buf - start; - - buf = buf + bytes_to_transfer; - addr = addr + bytes_to_transfer; - len = len - bytes_to_transfer; - } - - return buf - start; -} - -static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msgs, int num) -{ - struct adapter *tmp = i2c_get_adapdata(adapter); - int i, ret = 0; - - if (down_interruptible(&tmp->i2c_sem)) - return -ERESTARTSYS; - - ddprintk("%s: %d messages to transfer\n", __FUNCTION__, num); - - for (i = 0; i < num; i++) { - ddprintk("message %d: flags=0x%x, addr=0x%x, buf=0x%x, len=%d \n", i, - msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len); - } - - // read command - if ((num == 2) && (msgs[0].flags == 0) && (msgs[1].flags == I2C_M_RD) && (msgs[0].buf != NULL) && (msgs[1].buf != NULL)) { - - ret = flex_i2c_read(tmp, 0x10000000, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len); - - up(&tmp->i2c_sem); - - if (ret != msgs[1].len) { - dprintk("%s: read error !\n", __FUNCTION__); - - for (i = 0; i < 2; i++) { - dprintk("message %d: flags=0x%x, addr=0x%x, buf=0x%x, len=%d \n", i, - msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len); - } - - return -EREMOTEIO; - } - - return num; - } - // write command - for (i = 0; i < num; i++) { - - if ((msgs[i].flags != 0) || (msgs[i].buf == NULL) || (msgs[i].len < 2)) - return -EINVAL; - - ret = flex_i2c_write(tmp, 0x10000000, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); - - up(&tmp->i2c_sem); - - if (ret != msgs[0].len - 1) { - dprintk("%s: write error %i !\n", __FUNCTION__, ret); - - dprintk("message %d: flags=0x%x, addr=0x%x, buf[0]=0x%x, len=%d \n", i, - msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len); - - return -EREMOTEIO; - } - - return num; - } - - printk("%s: unknown command format !\n", __FUNCTION__); - - return -EINVAL; -} - -/* SRAM (Skystar2 rev2.3 has one "ISSI IS61LV256" chip on board, - but it seems that FlexCopII can work with more than one chip) */ -static void sram_set_net_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xfffffffc) | (dest & 3); - - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -static void sram_set_cai_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xfffffff3) | ((dest & 3) << 2); - - udelay(1000); - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -static void sram_set_cao_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xffffffcf) | ((dest & 3) << 4); - - udelay(1000); - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -static void sram_set_media_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xffffff3f) | ((dest & 3) << 6); - - udelay(1000); - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -/* SRAM memory is accessed through a buffer register in the FlexCop - chip (0x700). This register has the following structure: - bits 0-14 : address - bit 15 : read/write flag - bits 16-23 : 8-bit word to write - bits 24-27 : = 4 - bits 28-29 : memory bank selector - bit 31 : busy flag -*/ -static void flex_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) -{ - int i, retries; - u32 command; - - for (i = 0; i < len; i++) { - command = bank | addr | 0x04000000 | (*buf << 0x10); - - retries = 2; - - while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { - mdelay(1); - retries--; - }; - - if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); - - write_reg_dw(adapter, 0x700, command); - - buf++; - addr++; - } -} - -static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) -{ - int i, retries; - u32 command, value; - - for (i = 0; i < len; i++) { - command = bank | addr | 0x04008000; - - retries = 10000; - - while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { - mdelay(1); - retries--; - }; - - if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); - - write_reg_dw(adapter, 0x700, command); - - retries = 10000; - - while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { - mdelay(1); - retries--; - }; - - if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); - - value = read_reg_dw(adapter, 0x700) >> 0x10; - - *buf = (value & 0xff); - - addr++; - buf++; - } -} - -static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) -{ - u32 bank; - - bank = 0; - - if (adapter->dw_sram_type == 0x20000) { - bank = (addr & 0x18000) << 0x0d; - } - - if (adapter->dw_sram_type == 0x00000) { - if ((addr >> 0x0f) == 0) - bank = 0x20000000; - else - bank = 0x10000000; - } - - flex_sram_write(adapter, bank, addr & 0x7fff, buf, len); -} - -static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) -{ - u32 bank; - - bank = 0; - - if (adapter->dw_sram_type == 0x20000) { - bank = (addr & 0x18000) << 0x0d; - } - - if (adapter->dw_sram_type == 0x00000) { - if ((addr >> 0x0f) == 0) - bank = 0x20000000; - else - bank = 0x10000000; - } - - flex_sram_read(adapter, bank, addr & 0x7fff, buf, len); -} - -static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) -{ - u32 length; - - while (len != 0) { - length = len; - - // check if the address range belongs to the same - // 32K memory chip. If not, the data is read from - // one chip at a time. - if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { - length = (((addr >> 0x0f) + 1) << 0x0f) - addr; - } - - sram_read_chunk(adapter, addr, buf, length); - - addr = addr + length; - buf = buf + length; - len = len - length; - } -} - -static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) -{ - u32 length; - - while (len != 0) { - length = len; - - // check if the address range belongs to the same - // 32K memory chip. If not, the data is written to - // one chip at a time. - if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { - length = (((addr >> 0x0f) + 1) << 0x0f) - addr; - } - - sram_write_chunk(adapter, addr, buf, length); - - addr = addr + length; - buf = buf + length; - len = len - length; - } -} - -static void sram_set_size(struct adapter *adapter, u32 mask) -{ - write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); -} - -static void sram_init(struct adapter *adapter) -{ - u32 tmp; - - tmp = read_reg_dw(adapter, 0x71c); - - write_reg_dw(adapter, 0x71c, 1); - - if (read_reg_dw(adapter, 0x71c) != 0) { - write_reg_dw(adapter, 0x71c, tmp); - - adapter->dw_sram_type = tmp & 0x30000; - - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); - - } else { - - adapter->dw_sram_type = 0x10000; - - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); - } - - /* return value is never used? */ -/* return adapter->dw_sram_type; */ -} - -static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) -{ - u8 tmp1, tmp2; - - dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr); - - sram_set_size(adapter, mask); - sram_init(adapter); - - tmp2 = 0xa5; - tmp1 = 0x4f; - - sram_write(adapter, addr, &tmp2, 1); - sram_write(adapter, addr + 4, &tmp1, 1); - - tmp2 = 0; - - mdelay(20); - - sram_read(adapter, addr, &tmp2, 1); - sram_read(adapter, addr, &tmp2, 1); - - dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2); - - if (tmp2 != 0xa5) - return 0; - - tmp2 = 0x5a; - tmp1 = 0xf4; - - sram_write(adapter, addr, &tmp2, 1); - sram_write(adapter, addr + 4, &tmp1, 1); - - tmp2 = 0; - - mdelay(20); - - sram_read(adapter, addr, &tmp2, 1); - sram_read(adapter, addr, &tmp2, 1); - - dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2); - - if (tmp2 != 0x5a) - return 0; - - return 1; -} - -static u32 sram_length(struct adapter *adapter) -{ - if (adapter->dw_sram_type == 0x10000) - return 32768; // 32K - if (adapter->dw_sram_type == 0x00000) - return 65536; // 64K - if (adapter->dw_sram_type == 0x20000) - return 131072; // 128K - - return 32768; // 32K -} - -/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory. - - for 128K there are 4x32K chips at bank 0,1,2,3. - - for 64K there are 2x32K chips at bank 1,2. - - for 32K there is one 32K chip at bank 0. - - FlexCop works only with one bank at a time. The bank is selected - by bits 28-29 of the 0x700 register. - - bank 0 covers addresses 0x00000-0x07fff - bank 1 covers addresses 0x08000-0x0ffff - bank 2 covers addresses 0x10000-0x17fff - bank 3 covers addresses 0x18000-0x1ffff -*/ -static int sram_detect_for_flex2(struct adapter *adapter) -{ - u32 tmp, tmp2, tmp3; - - dprintk("%s:\n", __FUNCTION__); - - tmp = read_reg_dw(adapter, 0x208); - write_reg_dw(adapter, 0x208, 0); - - tmp2 = read_reg_dw(adapter, 0x71c); - - dprintk("%s: tmp2 = %x\n", __FUNCTION__, tmp2); - - write_reg_dw(adapter, 0x71c, 1); - - tmp3 = read_reg_dw(adapter, 0x71c); - - dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3); - - write_reg_dw(adapter, 0x71c, tmp2); - - // check for internal SRAM ??? - tmp3--; - if (tmp3 != 0) { - sram_set_size(adapter, 0x10000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 32K\n", __FUNCTION__); - - return 32; - } - - if (sram_test_location(adapter, 0x20000, 0x18000) != 0) { - sram_set_size(adapter, 0x20000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 128K\n", __FUNCTION__); - - return 128; - } - - if (sram_test_location(adapter, 0x00000, 0x10000) != 0) { - sram_set_size(adapter, 0x00000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 64K\n", __FUNCTION__); - - return 64; - } - - if (sram_test_location(adapter, 0x10000, 0x00000) != 0) { - sram_set_size(adapter, 0x10000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 32K\n", __FUNCTION__); - - return 32; - } - - sram_set_size(adapter, 0x10000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__); - - return 0; -} - -static void sll_detect_sram_size(struct adapter *adapter) -{ - sram_detect_for_flex2(adapter); -} - -/* EEPROM (Skystar2 has one "24LC08B" chip on board) */ -/* -static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len) -{ - return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len); -} -*/ - -static int eeprom_read(struct adapter *adapter, u16 addr, u8 *buf, u16 len) -{ - return flex_i2c_read(adapter, 0x20000000, 0x50, addr, buf, len); -} - -static u8 calc_lrc(u8 *buf, int len) -{ - int i; - u8 sum; - - sum = 0; - - for (i = 0; i < len; i++) - sum = sum ^ buf[i]; - - return sum; -} - -static int eeprom_lrc_read(struct adapter *adapter, u32 addr, u32 len, u8 *buf, int retries) -{ - int i; - - for (i = 0; i < retries; i++) { - if (eeprom_read(adapter, addr, buf, len) == len) { - if (calc_lrc(buf, len - 1) == buf[len - 1]) - return 1; - } - } - - return 0; -} - -/* -static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries) -{ - int i; - - for (i = 0; i < retries; i++) { - if (eeprom_write(adapter, addr, wbuf, len) == len) { - if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) - return 1; - } - } - - return 0; -} -*/ - - -/* These functions could be used to unlock SkyStar2 cards. */ - -/* -static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len) -{ - u8 rbuf[20]; - u8 wbuf[20]; - - if (len != 16) - return 0; - - memcpy(wbuf, key, len); - - wbuf[16] = 0; - wbuf[17] = 0; - wbuf[18] = 0; - wbuf[19] = calc_lrc(wbuf, 19); - - return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4); -} - -static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len) -{ - u8 buf[20]; - - if (len != 16) - return 0; - - if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0) - return 0; - - memcpy(key, buf, len); - - return 1; -} -*/ - -static int eeprom_get_mac_addr(struct adapter *adapter, char type, u8 *mac) -{ - u8 tmp[8]; - - if (eeprom_lrc_read(adapter, 0x3f8, 8, tmp, 4) != 0) { - if (type != 0) { - mac[0] = tmp[0]; - mac[1] = tmp[1]; - mac[2] = tmp[2]; - mac[3] = 0xfe; - mac[4] = 0xff; - mac[5] = tmp[3]; - mac[6] = tmp[4]; - mac[7] = tmp[5]; - - } else { - - mac[0] = tmp[0]; - mac[1] = tmp[1]; - mac[2] = tmp[2]; - mac[3] = tmp[3]; - mac[4] = tmp[4]; - mac[5] = tmp[5]; - } - - return 1; - - } else { - - if (type == 0) { - memset(mac, 0, 6); - - } else { - - memset(mac, 0, 8); - } - - return 0; - } -} - -/* -static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) -{ - u8 tmp[8]; - - if (type != 0) { - tmp[0] = mac[0]; - tmp[1] = mac[1]; - tmp[2] = mac[2]; - tmp[3] = mac[5]; - tmp[4] = mac[6]; - tmp[5] = mac[7]; - - } else { - - tmp[0] = mac[0]; - tmp[1] = mac[1]; - tmp[2] = mac[2]; - tmp[3] = mac[3]; - tmp[4] = mac[4]; - tmp[5] = mac[5]; - } - - tmp[6] = 0; - tmp[7] = calc_lrc(tmp, 7); - - if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8) - return 1; - - return 0; -} -*/ - -/* PID filter */ - -/* every flexcop has 6 "lower" hw PID filters */ -/* these are enabled by setting bits 0-5 of 0x208 */ -/* for the 32 additional filters we have to select one */ -/* of them through 0x310 and modify through 0x314 */ -/* op: 0=disable, 1=enable */ -static void filter_enable_hw_filter(struct adapter *adapter, int id, u8 op) -{ - dprintk("%s: id=%d op=%d\n", __FUNCTION__, id, op); - if (id <= 5) { - u32 mask = (0x00000001 << id); - write_reg_bitfield(adapter, 0x208, mask, op ? mask : 0); - } else { - /* select */ - write_reg_bitfield(adapter, 0x310, 0x1f, (id - 6) & 0x1f); - /* modify */ - write_reg_bitfield(adapter, 0x314, 0x00006000, op ? 0x00004000 : 0); - } -} - -/* this sets the PID that should pass the specified filter */ -static void pid_set_hw_pid(struct adapter *adapter, int id, u16 pid) -{ - dprintk("%s: id=%d pid=%d\n", __FUNCTION__, id, pid); - if (id <= 5) { - u32 adr = 0x300 + ((id & 6) << 1); - int shift = (id & 1) ? 16 : 0; - dprintk("%s: id=%d addr=%x %c pid=%d\n", __FUNCTION__, id, adr, (id & 1) ? 'h' : 'l', pid); - write_reg_bitfield(adapter, adr, (0x7fff) << shift, (pid & 0x1fff) << shift); - } else { - /* select */ - write_reg_bitfield(adapter, 0x310, 0x1f, (id - 6) & 0x1f); - /* modify */ - write_reg_bitfield(adapter, 0x314, 0x1fff, pid & 0x1fff); - } -} - - -/* -static void filter_enable_null_filter(struct adapter *adapter, u32 op) -{ - dprintk("%s: op=%x\n", __FUNCTION__, op); - - write_reg_bitfield(adapter, 0x208, 0x00000040, op?0x00000040:0); -} -*/ - -static void filter_enable_mask_filter(struct adapter *adapter, u32 op) -{ - dprintk("%s: op=%x\n", __FUNCTION__, op); - - write_reg_bitfield(adapter, 0x208, 0x00000080, op ? 0x00000080 : 0); -} - - -static void ctrl_enable_mac(struct adapter *adapter, u32 op) -{ - write_reg_bitfield(adapter, 0x208, 0x00004000, op ? 0x00004000 : 0); -} - -static int ca_set_mac_dst_addr_filter(struct adapter *adapter, u8 *mac) -{ - u32 tmp1, tmp2; - - tmp1 = (mac[3] << 0x18) | (mac[2] << 0x10) | (mac[1] << 0x08) | mac[0]; - tmp2 = (mac[5] << 0x08) | mac[4]; - - write_reg_dw(adapter, 0x418, tmp1); - write_reg_dw(adapter, 0x41c, tmp2); - - return 0; -} - -/* -static void set_ignore_mac_filter(struct adapter *adapter, u8 op) -{ - if (op != 0) { - write_reg_bitfield(adapter, 0x208, 0x00004000, 0); - adapter->mac_filter = 1; - } else { - if (adapter->mac_filter != 0) { - adapter->mac_filter = 0; - write_reg_bitfield(adapter, 0x208, 0x00004000, 0x00004000); - } - } -} -*/ - -/* -static void check_null_filter_enable(struct adapter *adapter) -{ - filter_enable_null_filter(adapter, 1); - filter_enable_mask_filter(adapter, 1); -} -*/ - -static void pid_set_group_pid(struct adapter *adapter, u16 pid) -{ - u32 value; - - dprintk("%s: pid=%x\n", __FUNCTION__, pid); - value = (pid & 0x3fff) | (read_reg_dw(adapter, 0x30c) & 0xffff0000); - write_reg_dw(adapter, 0x30c, value); -} - -static void pid_set_group_mask(struct adapter *adapter, u16 pid) -{ - u32 value; - - dprintk("%s: pid=%x\n", __FUNCTION__, pid); - value = ((pid & 0x3fff) << 0x10) | (read_reg_dw(adapter, 0x30c) & 0xffff); - write_reg_dw(adapter, 0x30c, value); -} - -/* -static int pid_get_group_pid(struct adapter *adapter) -{ - return read_reg_dw(adapter, 0x30c) & 0x00001fff; -} - -static int pid_get_group_mask(struct adapter *adapter) -{ - return (read_reg_dw(adapter, 0x30c) >> 0x10)& 0x00001fff; -} -*/ - -/* -static void reset_hardware_pid_filter(struct adapter *adapter) -{ - pid_set_stream1_pid(adapter, 0x1fff); - - pid_set_stream2_pid(adapter, 0x1fff); - filter_enable_stream2_filter(adapter, 0); - - pid_set_pcr_pid(adapter, 0x1fff); - filter_enable_pcr_filter(adapter, 0); - - pid_set_pmt_pid(adapter, 0x1fff); - filter_enable_pmt_filter(adapter, 0); - - pid_set_ecm_pid(adapter, 0x1fff); - filter_enable_ecm_filter(adapter, 0); - - pid_set_emm_pid(adapter, 0x1fff); - filter_enable_emm_filter(adapter, 0); -} -*/ - -static void init_pids(struct adapter *adapter) -{ - int i; - - adapter->pid_count = 0; - adapter->whole_bandwidth_count = 0; - for (i = 0; i < adapter->useable_hw_filters; i++) { - dprintk("%s: setting filter %d to 0x1fff\n", __FUNCTION__, i); - adapter->hw_pids[i] = 0x1fff; - pid_set_hw_pid(adapter, i, 0x1fff); -} - - pid_set_group_pid(adapter, 0); - pid_set_group_mask(adapter, 0x1fe0); -} - -static void open_whole_bandwidth(struct adapter *adapter) -{ - dprintk("%s:\n", __FUNCTION__); - pid_set_group_pid(adapter, 0); - pid_set_group_mask(adapter, 0); -/* - filter_enable_mask_filter(adapter, 1); -*/ -} - -static void close_whole_bandwidth(struct adapter *adapter) -{ - dprintk("%s:\n", __FUNCTION__); - pid_set_group_pid(adapter, 0); - pid_set_group_mask(adapter, 0x1fe0); -/* - filter_enable_mask_filter(adapter, 1); -*/ -} - -static void whole_bandwidth_inc(struct adapter *adapter) -{ - if (adapter->whole_bandwidth_count++ == 0) - open_whole_bandwidth(adapter); -} - -static void whole_bandwidth_dec(struct adapter *adapter) -{ - if (--adapter->whole_bandwidth_count <= 0) - close_whole_bandwidth(adapter); -} - -/* The specified PID has to be let through the - hw filters. - We try to allocate an hardware filter and open whole - bandwidth when allocation is impossible. - All pids<=0x1f pass through the group filter. - Returns 1 on success, -1 on error */ -static int add_hw_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid <= 0x1f) - return 1; - - /* we can't use a filter for 0x2000, so no search */ - if (pid != 0x2000) { - /* find an unused hardware filter */ - for (i = 0; i < adapter->useable_hw_filters; i++) { - dprintk("%s: pid=%d searching slot=%d\n", __FUNCTION__, pid, i); - if (adapter->hw_pids[i] == 0x1fff) { - dprintk("%s: pid=%d slot=%d\n", __FUNCTION__, pid, i); - adapter->hw_pids[i] = pid; - pid_set_hw_pid(adapter, i, pid); - filter_enable_hw_filter(adapter, i, 1); - return 1; - } - } - } - /* if we have not used a filter, this pid depends on whole bandwidth */ - dprintk("%s: pid=%d whole_bandwidth\n", __FUNCTION__, pid); - whole_bandwidth_inc(adapter); - return 1; - } - -/* returns -1 if the pid was not present in the filters */ -static int remove_hw_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid <= 0x1f) - return 1; - - /* we can't use a filter for 0x2000, so no search */ - if (pid != 0x2000) { - for (i = 0; i < adapter->useable_hw_filters; i++) { - dprintk("%s: pid=%d searching slot=%d\n", __FUNCTION__, pid, i); - if (adapter->hw_pids[i] == pid) { // find the pid slot - dprintk("%s: pid=%d slot=%d\n", __FUNCTION__, pid, i); - adapter->hw_pids[i] = 0x1fff; - pid_set_hw_pid(adapter, i, 0x1fff); - filter_enable_hw_filter(adapter, i, 0); - return 1; - } - } - } - /* if we have not used a filter, this pid depended on whole bandwith */ - dprintk("%s: pid=%d whole_bandwidth\n", __FUNCTION__, pid); - whole_bandwidth_dec(adapter); - return 1; - } - -/* Adds a PID to the filters. - Adding a pid more than once is possible, we keep reference counts. - Whole stream available through pid==0x2000. - Returns 1 on success, -1 on error */ -static int add_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid > 0x1ffe && pid != 0x2000) - return -1; - - // check if the pid is already present - for (i = 0; i < adapter->pid_count; i++) - if (adapter->pid_list[i] == pid) { - adapter->pid_rc[i]++; // increment ref counter - return 1; - } - - if (adapter->pid_count == N_PID_SLOTS) - return -1; // no more pids can be added - adapter->pid_list[adapter->pid_count] = pid; // register pid - adapter->pid_rc[adapter->pid_count] = 1; - adapter->pid_count++; - // hardware setting - add_hw_pid(adapter, pid); - - return 1; - } - -/* Removes a PID from the filters. */ -static int remove_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid > 0x1ffe && pid != 0x2000) - return -1; - - // check if the pid is present (it must be!) - for (i = 0; i < adapter->pid_count; i++) { - if (adapter->pid_list[i] == pid) { - adapter->pid_rc[i]--; - if (adapter->pid_rc[i] <= 0) { - // remove from the list - adapter->pid_count--; - adapter->pid_list[i]=adapter->pid_list[adapter->pid_count]; - adapter->pid_rc[i] = adapter->pid_rc[adapter->pid_count]; - // hardware setting - remove_hw_pid(adapter, pid); - } - return 1; - } - } - - return -1; -} - - -/* dma & irq */ -static void ctrl_enable_smc(struct adapter *adapter, u32 op) -{ - write_reg_bitfield(adapter, 0x208, 0x00000800, op ? 0x00000800 : 0); -} - -static void dma_enable_disable_irq(struct adapter *adapter, u32 flag1, u32 flag2, u32 flag3) -{ - adapter->dma_ctrl = adapter->dma_ctrl & 0x000f0000; - - if (flag1 == 0) { - if (flag2 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00010000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00010000; - - if (flag3 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00020000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00020000; - - } else { - - if (flag2 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00040000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00040000; - - if (flag3 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00080000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00080000; - } -} - -static void irq_dma_enable_disable_irq(struct adapter *adapter, u32 op) -{ - u32 value; - - value = read_reg_dw(adapter, 0x208) & 0xfff0ffff; - - if (op != 0) - value = value | (adapter->dma_ctrl & 0x000f0000); - - write_reg_dw(adapter, 0x208, value); -} - -/* FlexCopII has 2 dma channels. DMA1 is used to transfer TS data to - system memory. - - The DMA1 buffer is divided in 2 subbuffers of equal size. - FlexCopII will transfer TS data to one subbuffer, signal an interrupt - when the subbuffer is full and continue fillig the second subbuffer. - - For DMA1: - subbuffer size in 32-bit words is stored in the first 24 bits of - register 0x004. The last 8 bits of register 0x004 contain the number - of subbuffers. - - the first 30 bits of register 0x000 contain the address of the first - subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1, - when dma1 is enabled. - - the first 30 bits of register 0x00c contain the address of the second - subbuffer. the last 2 bits contain 1. - - register 0x008 will contain the address of the subbuffer that was filled - with TS data, when FlexCopII will generate an interrupt. - - For DMA2: - subbuffer size in 32-bit words is stored in the first 24 bits of - register 0x014. The last 8 bits of register 0x014 contain the number - of subbuffers. - - the first 30 bits of register 0x010 contain the address of the first - subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1, - when dma1 is enabled. - - the first 30 bits of register 0x01c contain the address of the second - subbuffer. the last 2 bits contain 1. - - register 0x018 contains the address of the subbuffer that was filled - with TS data, when FlexCopII generates an interrupt. -*/ -static int dma_init_dma(struct adapter *adapter, u32 dma_channel) -{ - u32 subbuffers, subbufsize, subbuf0, subbuf1; - - if (dma_channel == 0) { - dprintk("%s: Initializing DMA1 channel\n", __FUNCTION__); - - subbuffers = 2; - - subbufsize = (((adapter->dmaq1.buffer_size / 2) / 4) << 8) | subbuffers; - - subbuf0 = adapter->dmaq1.bus_addr & 0xfffffffc; - - subbuf1 = ((adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) & 0xfffffffc) | 1; - - dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0); - udelay(1000); - write_reg_dw(adapter, 0x000, subbuf0); - - dprintk("%s: subbuffer size = 0x%x\n", __FUNCTION__, (subbufsize >> 8) * 4); - udelay(1000); - write_reg_dw(adapter, 0x004, subbufsize); - - dprintk("%s: second subbuffer address = 0x%x\n", __FUNCTION__, subbuf1); - udelay(1000); - write_reg_dw(adapter, 0x00c, subbuf1); - - dprintk("%s: counter = 0x%x\n", __FUNCTION__, adapter->dmaq1.bus_addr & 0xfffffffc); - write_reg_dw(adapter, 0x008, adapter->dmaq1.bus_addr & 0xfffffffc); - udelay(1000); - - dma_enable_disable_irq(adapter, 0, 1, subbuffers ? 1 : 0); - - irq_dma_enable_disable_irq(adapter, 1); - - sram_set_media_dest(adapter, 1); - sram_set_net_dest(adapter, 1); - sram_set_cai_dest(adapter, 2); - sram_set_cao_dest(adapter, 2); - } - - if (dma_channel == 1) { - dprintk("%s: Initializing DMA2 channel\n", __FUNCTION__); - - subbuffers = 2; - - subbufsize = (((adapter->dmaq2.buffer_size / 2) / 4) << 8) | subbuffers; - - subbuf0 = adapter->dmaq2.bus_addr & 0xfffffffc; - - subbuf1 = ((adapter->dmaq2.bus_addr + adapter->dmaq2.buffer_size / 2) & 0xfffffffc) | 1; - - dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0); - udelay(1000); - write_reg_dw(adapter, 0x010, subbuf0); - - dprintk("%s: subbuffer size = 0x%x\n", __FUNCTION__, (subbufsize >> 8) * 4); - udelay(1000); - write_reg_dw(adapter, 0x014, subbufsize); - - dprintk("%s: second buffer address = 0x%x\n", __FUNCTION__, subbuf1); - udelay(1000); - write_reg_dw(adapter, 0x01c, subbuf1); - - sram_set_cai_dest(adapter, 2); - } - - return 0; -} - -static void ctrl_enable_receive_data(struct adapter *adapter, u32 op) -{ - if (op == 0) { - write_reg_bitfield(adapter, 0x208, 0x00008000, 0); - adapter->dma_status = adapter->dma_status & ~0x00000004; - } else { - write_reg_bitfield(adapter, 0x208, 0x00008000, 0x00008000); - adapter->dma_status = adapter->dma_status | 0x00000004; - } -} - -/* bit 0 of dma_mask is set to 1 if dma1 channel has to be enabled/disabled - bit 1 of dma_mask is set to 1 if dma2 channel has to be enabled/disabled -*/ -static void dma_start_stop(struct adapter *adapter, u32 dma_mask, int start_stop) -{ - u32 dma_enable, dma1_enable, dma2_enable; - - dprintk("%s: dma_mask=%x\n", __FUNCTION__, dma_mask); - - if (start_stop == 1) { - dprintk("%s: starting dma\n", __FUNCTION__); - - dma1_enable = 0; - dma2_enable = 0; - - if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) == 0) && (adapter->dmaq1.bus_addr != 0)) { - adapter->dma_status = adapter->dma_status | 1; - dma1_enable = 1; - } - - if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) == 0) && (adapter->dmaq2.bus_addr != 0)) { - adapter->dma_status = adapter->dma_status | 2; - dma2_enable = 1; - } - // enable dma1 and dma2 - if ((dma1_enable == 1) && (dma2_enable == 1)) { - write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr | 1); - write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1); - write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr | 1); - - ctrl_enable_receive_data(adapter, 1); - - return; - } - // enable dma1 - if ((dma1_enable == 1) && (dma2_enable == 0)) { - write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr | 1); - write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1); - - ctrl_enable_receive_data(adapter, 1); - - return; - } - // enable dma2 - if ((dma1_enable == 0) && (dma2_enable == 1)) { - write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr | 1); - - ctrl_enable_receive_data(adapter, 1); - - return; - } - // start dma - if ((dma1_enable == 0) && (dma2_enable == 0)) { - ctrl_enable_receive_data(adapter, 1); - - return; - } - - } else { - - dprintk("%s: stopping dma\n", __FUNCTION__); - - dma_enable = adapter->dma_status & 0x00000003; - - if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0)) { - dma_enable = dma_enable & 0xfffffffe; - } - - if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0)) { - dma_enable = dma_enable & 0xfffffffd; - } - //stop dma - if ((dma_enable == 0) && ((adapter->dma_status & 4) != 0)) { - ctrl_enable_receive_data(adapter, 0); - - udelay(3000); - } - //disable dma1 - if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0) && (adapter->dmaq1.bus_addr != 0)) { - write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr); - write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1); - - adapter->dma_status = adapter->dma_status & ~0x00000001; - } - //disable dma2 - if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0) && (adapter->dmaq2.bus_addr != 0)) { - write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr); - - adapter->dma_status = adapter->dma_status & ~0x00000002; - } - } -} - -static void open_stream(struct adapter *adapter, u16 pid) -{ - u32 dma_mask; - - ++adapter->capturing; - - filter_enable_mask_filter(adapter, 1); - - add_pid(adapter, pid); - - dprintk("%s: adapter->dma_status=%x\n", __FUNCTION__, adapter->dma_status); - - if ((adapter->dma_status & 7) != 7) { - dma_mask = 0; - - if (((adapter->dma_status & 0x10000000) != 0) && ((adapter->dma_status & 1) == 0)) { - dma_mask = dma_mask | 1; - - adapter->dmaq1.head = 0; - adapter->dmaq1.tail = 0; - - memset(adapter->dmaq1.buffer, 0, adapter->dmaq1.buffer_size); - } - - if (((adapter->dma_status & 0x20000000) != 0) && ((adapter->dma_status & 2) == 0)) { - dma_mask = dma_mask | 2; - - adapter->dmaq2.head = 0; - adapter->dmaq2.tail = 0; - } - - if (dma_mask != 0) { - irq_dma_enable_disable_irq(adapter, 1); - - dma_start_stop(adapter, dma_mask, 1); - } - } -} - -static void close_stream(struct adapter *adapter, u16 pid) -{ - if (adapter->capturing > 0) - --adapter->capturing; - - dprintk("%s: dma_status=%x\n", __FUNCTION__, adapter->dma_status); - - if (adapter->capturing == 0) { - u32 dma_mask = 0; - - if ((adapter->dma_status & 1) != 0) - dma_mask = dma_mask | 0x00000001; - if ((adapter->dma_status & 2) != 0) - dma_mask = dma_mask | 0x00000002; - - if (dma_mask != 0) { - dma_start_stop(adapter, dma_mask, 0); - } - } - remove_pid(adapter, pid); -} - -static void interrupt_service_dma1(struct adapter *adapter) -{ - struct dvb_demux *dvbdmx = &adapter->demux; - - int n_cur_dma_counter; - u32 n_num_bytes_parsed; - u32 n_num_new_bytes_transferred; - u32 dw_default_packet_size = 188; - u8 gb_tmp_buffer[188]; - u8 *pb_dma_buf_cur_pos; - - n_cur_dma_counter = readl(adapter->io_mem + 0x008) - adapter->dmaq1.bus_addr; - n_cur_dma_counter = (n_cur_dma_counter / dw_default_packet_size) * dw_default_packet_size; - - if ((n_cur_dma_counter < 0) || (n_cur_dma_counter > adapter->dmaq1.buffer_size)) { - dprintk("%s: dma counter outside dma buffer\n", __FUNCTION__); - return; - } - - adapter->dmaq1.head = n_cur_dma_counter; - - if (adapter->dmaq1.tail <= n_cur_dma_counter) { - n_num_new_bytes_transferred = n_cur_dma_counter - adapter->dmaq1.tail; - - } else { - - n_num_new_bytes_transferred = (adapter->dmaq1.buffer_size - adapter->dmaq1.tail) + n_cur_dma_counter; - } - - ddprintk("%s: n_cur_dma_counter = %d\n", __FUNCTION__, n_cur_dma_counter); - ddprintk("%s: dmaq1.tail = %d\n", __FUNCTION__, adapter->dmaq1.tail); - ddprintk("%s: bytes_transferred = %d\n", __FUNCTION__, n_num_new_bytes_transferred); - - if (n_num_new_bytes_transferred < dw_default_packet_size) - return; - - n_num_bytes_parsed = 0; - - while (n_num_bytes_parsed < n_num_new_bytes_transferred) { - pb_dma_buf_cur_pos = adapter->dmaq1.buffer + adapter->dmaq1.tail; - - if (adapter->dmaq1.buffer + adapter->dmaq1.buffer_size < adapter->dmaq1.buffer + adapter->dmaq1.tail + 188) { - memcpy(gb_tmp_buffer, adapter->dmaq1.buffer + adapter->dmaq1.tail, - adapter->dmaq1.buffer_size - adapter->dmaq1.tail); - memcpy(gb_tmp_buffer + (adapter->dmaq1.buffer_size - adapter->dmaq1.tail), adapter->dmaq1.buffer, - (188 - (adapter->dmaq1.buffer_size - adapter->dmaq1.tail))); - - pb_dma_buf_cur_pos = gb_tmp_buffer; - } - - if (adapter->capturing != 0) { - dvb_dmx_swfilter_packets(dvbdmx, pb_dma_buf_cur_pos, dw_default_packet_size / 188); - } - - n_num_bytes_parsed = n_num_bytes_parsed + dw_default_packet_size; - - adapter->dmaq1.tail = adapter->dmaq1.tail + dw_default_packet_size; - - if (adapter->dmaq1.tail >= adapter->dmaq1.buffer_size) - adapter->dmaq1.tail = adapter->dmaq1.tail - adapter->dmaq1.buffer_size; - }; -} - -static void interrupt_service_dma2(struct adapter *adapter) -{ - printk("%s:\n", __FUNCTION__); -} - -static irqreturn_t isr(int irq, void *dev_id, struct pt_regs *regs) -{ - struct adapter *tmp = dev_id; - - u32 value; - - ddprintk("%s:\n", __FUNCTION__); - - spin_lock_irq(&tmp->lock); - - if (0 == ((value = read_reg_dw(tmp, 0x20c)) & 0x0f)) { - spin_unlock_irq(&tmp->lock); - return IRQ_NONE; - } - - while (value != 0) { - if ((value & 0x03) != 0) - interrupt_service_dma1(tmp); - if ((value & 0x0c) != 0) - interrupt_service_dma2(tmp); - value = read_reg_dw(tmp, 0x20c) & 0x0f; - } - - spin_unlock_irq(&tmp->lock); - return IRQ_HANDLED; -} - -static int init_dma_queue_one(struct adapter *adapter, struct dmaq *dmaq, - int size, int dmaq_offset) -{ - struct pci_dev *pdev = adapter->pdev; - dma_addr_t dma_addr; - - dmaq->head = 0; - dmaq->tail = 0; - - dmaq->buffer = pci_alloc_consistent(pdev, size + 0x80, &dma_addr); - if (!dmaq->buffer) - return -ENOMEM; - - dmaq->bus_addr = dma_addr; - dmaq->buffer_size = size; - - dma_init_dma(adapter, dmaq_offset); - - ddprintk("%s: allocated dma buffer at 0x%p, length=%d\n", - __FUNCTION__, dmaq->buffer, size); - - return 0; - } - -static int init_dma_queue(struct adapter *adapter) -{ - struct { - struct dmaq *dmaq; - u32 dma_status; - int size; - } dmaq_desc[] = { - { &adapter->dmaq1, 0x10000000, SIZE_OF_BUF_DMA1 }, - { &adapter->dmaq2, 0x20000000, SIZE_OF_BUF_DMA2 } - }, *p = dmaq_desc; - int i; - - for (i = 0; i < 2; i++, p++) { - if (init_dma_queue_one(adapter, p->dmaq, p->size, i) < 0) - adapter->dma_status &= ~p->dma_status; - else - adapter->dma_status |= p->dma_status; - } - return (adapter->dma_status & 0x30000000) ? 0 : -ENOMEM; -} - -static void free_dma_queue_one(struct adapter *adapter, struct dmaq *dmaq) -{ - if (dmaq->buffer) { - pci_free_consistent(adapter->pdev, dmaq->buffer_size + 0x80, - dmaq->buffer, dmaq->bus_addr); - memset(dmaq, 0, sizeof(*dmaq)); - } -} - -static void free_dma_queue(struct adapter *adapter) -{ - struct dmaq *dmaq[] = { - &adapter->dmaq1, - &adapter->dmaq2, - NULL - }, **p; - - for (p = dmaq; *p; p++) - free_dma_queue_one(adapter, *p); - } - -static void release_adapter(struct adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - - iounmap(adapter->io_mem); - pci_disable_device(pdev); - pci_release_region(pdev, 0); - pci_release_region(pdev, 1); -} - -static void free_adapter_object(struct adapter *adapter) -{ - dprintk("%s:\n", __FUNCTION__); - - close_stream(adapter, 0); - free_irq(adapter->irq, adapter); - free_dma_queue(adapter); - release_adapter(adapter); - kfree(adapter); -} - -static struct pci_driver skystar2_pci_driver; - -static int claim_adapter(struct adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - u16 var; - int ret; - - ret = pci_request_region(pdev, 1, skystar2_pci_driver.name); - if (ret < 0) - goto out; - - ret = pci_request_region(pdev, 0, skystar2_pci_driver.name); - if (ret < 0) - goto err_pci_release_1; - - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &adapter->card_revision); - - dprintk("%s: card revision %x \n", __FUNCTION__, adapter->card_revision); - - ret = pci_enable_device(pdev); - if (ret < 0) - goto err_pci_release_0; - - pci_read_config_word(pdev, 4, &var); - - if ((var & 4) == 0) - pci_set_master(pdev); - - adapter->io_port = pdev->resource[1].start; - - adapter->io_mem = ioremap(pdev->resource[0].start, 0x800); - - if (!adapter->io_mem) { - dprintk("%s: can not map io memory\n", __FUNCTION__); - ret = -EIO; - goto err_pci_disable; - } - - dprintk("%s: io memory maped at %p\n", __FUNCTION__, adapter->io_mem); - - ret = 1; -out: - return ret; - -err_pci_disable: - pci_disable_device(pdev); -err_pci_release_0: - pci_release_region(pdev, 0); -err_pci_release_1: - pci_release_region(pdev, 1); - goto out; -} - -/* -static int sll_reset_flexcop(struct adapter *adapter) -{ - write_reg_dw(adapter, 0x208, 0); - write_reg_dw(adapter, 0x210, 0xb2ff); - - return 0; -} -*/ - -static void decide_how_many_hw_filters(struct adapter *adapter) -{ - int hw_filters; - int mod_option_hw_filters; - - // FlexCop IIb & III have 6+32 hw filters - // FlexCop II has 6 hw filters, every other should have at least 6 - switch (adapter->b2c2_revision) { - case 0x82: /* II */ - hw_filters = 6; - break; - case 0xc3: /* IIB */ - hw_filters = 6 + 32; - break; - case 0xc0: /* III */ - hw_filters = 6 + 32; - break; - default: - hw_filters = 6; - break; - } - printk("%s: the chip has %i hardware filters", __FILE__, hw_filters); - - mod_option_hw_filters = 0; - if (enable_hw_filters >= 1) - mod_option_hw_filters += 6; - if (enable_hw_filters >= 2) - mod_option_hw_filters += 32; - - if (mod_option_hw_filters >= hw_filters) { - adapter->useable_hw_filters = hw_filters; - } else { - adapter->useable_hw_filters = mod_option_hw_filters; - printk(", but only %d will be used because of module option", mod_option_hw_filters); - } - printk("\n"); - dprintk("%s: useable_hardware_filters set to %i\n", __FILE__, adapter->useable_hw_filters); -} - -static int driver_initialize(struct pci_dev *pdev) -{ - struct adapter *adapter; - u32 tmp; - int ret = -ENOMEM; - - adapter = kmalloc(sizeof(struct adapter), GFP_KERNEL); - if (!adapter) { - dprintk("%s: out of memory!\n", __FUNCTION__); - goto out; - } - - memset(adapter, 0, sizeof(struct adapter)); - - pci_set_drvdata(pdev,adapter); - - adapter->pdev = pdev; - adapter->irq = pdev->irq; - - ret = claim_adapter(adapter); - if (ret < 0) - goto err_kfree; - - irq_dma_enable_disable_irq(adapter, 0); - - ret = request_irq(pdev->irq, isr, 0x4000000, "Skystar2", adapter); - if (ret < 0) { - dprintk("%s: unable to allocate irq=%d !\n", __FUNCTION__, pdev->irq); - goto err_release_adapter; - } - - read_reg_dw(adapter, 0x208); - write_reg_dw(adapter, 0x208, 0); - write_reg_dw(adapter, 0x210, 0xb2ff); - write_reg_dw(adapter, 0x208, 0x40); - - ret = init_dma_queue(adapter); - if (ret < 0) - goto err_free_irq; - - adapter->b2c2_revision = (read_reg_dw(adapter, 0x204) >> 0x18); - - switch (adapter->b2c2_revision) { - case 0x82: - printk("%s: FlexCopII(rev.130) chip found\n", __FILE__); - break; - case 0xc3: - printk("%s: FlexCopIIB(rev.195) chip found\n", __FILE__); - break; - case 0xc0: - printk("%s: FlexCopIII(rev.192) chip found\n", __FILE__); - break; - default: - printk("%s: The revision of the FlexCop chip on your card is %d\n", __FILE__, adapter->b2c2_revision); - printk("%s: This driver works only with FlexCopII(rev.130), FlexCopIIB(rev.195) and FlexCopIII(rev.192).\n", __FILE__); - ret = -ENODEV; - goto err_free_dma_queue; - } - - decide_how_many_hw_filters(adapter); - - init_pids(adapter); - - tmp = read_reg_dw(adapter, 0x204); - - write_reg_dw(adapter, 0x204, 0); - mdelay(20); - - write_reg_dw(adapter, 0x204, tmp); - mdelay(10); - - tmp = read_reg_dw(adapter, 0x308); - write_reg_dw(adapter, 0x308, 0x4000 | tmp); - - adapter->dw_sram_type = 0x10000; - - sll_detect_sram_size(adapter); - - dprintk("%s sram length = %d, sram type= %x\n", __FUNCTION__, sram_length(adapter), adapter->dw_sram_type); - - sram_set_media_dest(adapter, 1); - sram_set_net_dest(adapter, 1); - - ctrl_enable_smc(adapter, 0); - - sram_set_cai_dest(adapter, 2); - sram_set_cao_dest(adapter, 2); - - dma_enable_disable_irq(adapter, 1, 0, 0); - - if (eeprom_get_mac_addr(adapter, 0, adapter->mac_addr) != 0) { - printk("%s MAC address = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x \n", __FUNCTION__, adapter->mac_addr[0], - adapter->mac_addr[1], adapter->mac_addr[2], adapter->mac_addr[3], adapter->mac_addr[4], adapter->mac_addr[5], - adapter->mac_addr[6], adapter->mac_addr[7] - ); - - ca_set_mac_dst_addr_filter(adapter, adapter->mac_addr); - ctrl_enable_mac(adapter, 1); - } - - spin_lock_init(&adapter->lock); - -out: - return ret; - -err_free_dma_queue: - free_dma_queue(adapter); -err_free_irq: - free_irq(pdev->irq, adapter); -err_release_adapter: - release_adapter(adapter); -err_kfree: - pci_set_drvdata(pdev, NULL); - kfree(adapter); - goto out; -} - -static void driver_halt(struct pci_dev *pdev) -{ - struct adapter *adapter = pci_get_drvdata(pdev); - - irq_dma_enable_disable_irq(adapter, 0); - - ctrl_enable_receive_data(adapter, 0); - - free_adapter_object(adapter); - - pci_set_drvdata(pdev, NULL); -} - -static int dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - struct adapter *adapter = (struct adapter *) dvbdmx->priv; - - dprintk("%s: PID=%d, type=%d\n", __FUNCTION__, dvbdmxfeed->pid, dvbdmxfeed->type); - - open_stream(adapter, dvbdmxfeed->pid); - - return 0; -} - -static int dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - struct adapter *adapter = (struct adapter *) dvbdmx->priv; - - dprintk("%s: PID=%d, type=%d\n", __FUNCTION__, dvbdmxfeed->pid, dvbdmxfeed->type); - - close_stream(adapter, dvbdmxfeed->pid); - - return 0; -} - -/* lnb control */ -static void set_tuner_tone(struct adapter *adapter, u8 tone) -{ - u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; - u16 ax; - - dprintk("%s: %u\n", __FUNCTION__, tone); - - switch (tone) { - case 1: - ax = wz_half_period_for_45_mhz[0]; - break; - case 2: - ax = wz_half_period_for_45_mhz[1]; - break; - case 3: - ax = wz_half_period_for_45_mhz[2]; - break; - case 4: - ax = wz_half_period_for_45_mhz[3]; - break; - - default: - ax = 0; - } - - if (ax != 0) { - write_reg_dw(adapter, 0x200, ((ax << 0x0f) + (ax & 0x7fff)) | 0x40000000); - - } else { - - write_reg_dw(adapter, 0x200, 0x40ff8000); - } -} - -static void set_tuner_polarity(struct adapter *adapter, u8 polarity) -{ - u32 var; - - dprintk("%s : polarity = %u \n", __FUNCTION__, polarity); - - var = read_reg_dw(adapter, 0x204); - - if (polarity == 0) { - dprintk("%s: LNB power off\n", __FUNCTION__); - var = var | 1; - }; - - if (polarity == 1) { - var = var & ~1; - var = var & ~4; - }; - - if (polarity == 2) { - var = var & ~1; - var = var | 4; - } - - write_reg_dw(adapter, 0x204, var); -} - -static void diseqc_send_bit(struct adapter *adapter, int data) -{ - set_tuner_tone(adapter, 1); - udelay(data ? 500 : 1000); - set_tuner_tone(adapter, 0); - udelay(data ? 1000 : 500); -} - - -static void diseqc_send_byte(struct adapter *adapter, int data) - { - int i, par = 1, d; - - for (i = 7; i >= 0; i--) { - d = (data >> i) & 1; - par ^= d; - diseqc_send_bit(adapter, d); - } - - diseqc_send_bit(adapter, par); - } - - -static int send_diseqc_msg(struct adapter *adapter, int len, u8 *msg, unsigned long burst) -{ - int i; - - set_tuner_tone(adapter, 0); - mdelay(16); - - for (i = 0; i < len; i++) - diseqc_send_byte(adapter, msg[i]); - - mdelay(16); - - if (burst != -1) { - if (burst) - diseqc_send_byte(adapter, 0xff); - else { - set_tuner_tone(adapter, 1); - udelay(12500); - set_tuner_tone(adapter, 0); - } - msleep(20); - } - - return 0; -} - -static int flexcop_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - switch(tone) { - case SEC_TONE_ON: - set_tuner_tone(adapter, 1); - break; - case SEC_TONE_OFF: - set_tuner_tone(adapter, 0); - break; - default: - return -EINVAL; - }; - - return 0; -} - -static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) - { - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - send_diseqc_msg(adapter, cmd->msg_len, cmd->msg, 0); - - return 0; - } - -static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) -{ - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - send_diseqc_msg(adapter, 0, NULL, minicmd); - - return 0; -} - -static int flexcop_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) - { - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - dprintk("%s: FE_SET_VOLTAGE\n", __FUNCTION__); - - switch (voltage) { - case SEC_VOLTAGE_13: - dprintk("%s: SEC_VOLTAGE_13, %x\n", __FUNCTION__, SEC_VOLTAGE_13); - set_tuner_polarity(adapter, 1); - return 0; - - case SEC_VOLTAGE_18: - dprintk("%s: SEC_VOLTAGE_18, %x\n", __FUNCTION__, SEC_VOLTAGE_18); - set_tuner_polarity(adapter, 2); - return 0; - - default: - return -EINVAL; - } - } - -static int flexcop_sleep(struct dvb_frontend* fe) - { - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - dprintk("%s: FE_SLEEP\n", __FUNCTION__); - set_tuner_polarity(adapter, 0); - - if (adapter->fe_sleep) return adapter->fe_sleep(fe); - return 0; - } - -static u32 flexcop_i2c_func(struct i2c_adapter *adapter) - { - printk("flexcop_i2c_func\n"); - - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm flexcop_algo = { - .name = "flexcop i2c algorithm", - .id = I2C_ALGO_BIT, - .master_xfer = master_xfer, - .functionality = flexcop_i2c_func, -}; - - - - -static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); - - return 0; -} - -static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - div = params->frequency / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x84; // 0xC4 - buf[3] = 0x08; - - if (params->frequency < 1500000) buf[3] |= 0x10; - - if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static u8 samsung_tbmu24112_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7D, - 0x05, 0x35, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0xC3, - 0x0C, 0x00, - 0x0D, 0x81, - 0x0E, 0x23, - 0x0F, 0x12, - 0x10, 0x7E, - 0x11, 0x84, - 0x12, 0xB9, - 0x13, 0x88, - 0x14, 0x89, - 0x15, 0xC9, - 0x16, 0x00, - 0x17, 0x5C, - 0x18, 0x00, - 0x19, 0x00, - 0x1A, 0x00, - 0x1C, 0x00, - 0x1D, 0x00, - 0x1E, 0x00, - 0x1F, 0x3A, - 0x20, 0x2E, - 0x21, 0x80, - 0x22, 0xFF, - 0x23, 0xC1, - 0x28, 0x00, - 0x29, 0x1E, - 0x2A, 0x14, - 0x2B, 0x0F, - 0x2C, 0x09, - 0x2D, 0x05, - 0x31, 0x1F, - 0x32, 0x19, - 0x33, 0xFE, - 0x34, 0x93, - 0xff, 0xff, - }; - -static struct stv0299_config samsung_tbmu24112_config = { - .demod_address = 0x68, - .inittab = samsung_tbmu24112_inittab, - .mclk = 88000000UL, - .invert = 0, - .enhanced_tuning = 0, - .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_LK, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, - .pll_set = samsung_tbmu24112_pll_set, -}; - - - -static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) -{ - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - return request_firmware(fw, name, &adapter->pdev->dev); -} - - -static struct nxt2002_config samsung_tbmv_config = { - .demod_address = 0x0A, - .request_firmware = nxt2002_request_firmware, -}; - -static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) -{ - static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; - static u8 mt352_reset [] = { 0x50, 0x80 }; - static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; - static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); - - return 0; -} - -static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) -{ - u32 div; - unsigned char bs = 0; - - #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ - div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; - - if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; - if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; - if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; - - pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address - pllbuf[1] = div >> 8; - pllbuf[2] = div & 0xff; - pllbuf[3] = 0xcc; - pllbuf[4] = bs; - - return 0; -} - -static struct mt352_config samsung_tdtc9251dh0_config = { - - .demod_address = 0x0f, - .demod_init = samsung_tdtc9251dh0_demod_init, - .pll_set = samsung_tdtc9251dh0_pll_set, -}; - -static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - div = (params->frequency + (125/2)) / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - buf[2] = 0x84 | ((div >> 10) & 0x60); - buf[3] = 0x80; - - if (params->frequency < 1550000) - buf[3] |= 0x02; - - if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct mt312_config skystar23_samsung_tbdu18132_config = { - - .demod_address = 0x0e, - .pll_set = skystar23_samsung_tbdu18132_pll_set, -}; - - - - -static void frontend_init(struct adapter *skystar2) -{ - switch(skystar2->pdev->device) { - case 0x2103: // Technisat Skystar2 OR Technisat Airstar2 (DVB-T or ATSC) - - // Attempt to load the Nextwave nxt2002 for ATSC support - skystar2->fe = nxt2002_attach(&samsung_tbmv_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe_sleep = skystar2->fe->ops->sleep; - skystar2->fe->ops->sleep = flexcop_sleep; - break; - } - - // try the skystar2 v2.6 first (stv0299/Samsung tbmu24112(sl1935)) - skystar2->fe = stv0299_attach(&samsung_tbmu24112_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe->ops->set_voltage = flexcop_set_voltage; - skystar2->fe_sleep = skystar2->fe->ops->sleep; - skystar2->fe->ops->sleep = flexcop_sleep; - break; -} - - // try the airstar2 (mt352/Samsung tdtc9251dh0(??)) - skystar2->fe = mt352_attach(&samsung_tdtc9251dh0_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe->ops->info.frequency_min = 474000000; - skystar2->fe->ops->info.frequency_max = 858000000; - break; - } - - // try the skystar2 v2.3 (vp310/Samsung tbdu18132(tsa5059)) - skystar2->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; - skystar2->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; - skystar2->fe->ops->set_tone = flexcop_set_tone; - skystar2->fe->ops->set_voltage = flexcop_set_voltage; - skystar2->fe_sleep = skystar2->fe->ops->sleep; - skystar2->fe->ops->sleep = flexcop_sleep; - break; - } - break; - } - - if (skystar2->fe == NULL) { - printk("skystar2: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", - skystar2->pdev->vendor, - skystar2->pdev->device, - skystar2->pdev->subsystem_vendor, - skystar2->pdev->subsystem_device); - } else { - if (dvb_register_frontend(&skystar2->dvb_adapter, skystar2->fe)) { - printk("skystar2: Frontend registration failed!\n"); - if (skystar2->fe->ops->release) - skystar2->fe->ops->release(skystar2->fe); - skystar2->fe = NULL; - } - } -} - - -static int skystar2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct adapter *adapter; - struct dvb_adapter *dvb_adapter; - struct dvb_demux *dvbdemux; - struct dmx_demux *dmx; - int ret = -ENODEV; - - if (!pdev) - goto out; - - ret = driver_initialize(pdev); - if (ret < 0) - goto out; - - adapter = pci_get_drvdata(pdev); - dvb_adapter = &adapter->dvb_adapter; - - ret = dvb_register_adapter(dvb_adapter, skystar2_pci_driver.name, - THIS_MODULE); - if (ret < 0) { - printk("%s: Error registering DVB adapter\n", __FUNCTION__); - goto err_halt; - } - - dvb_adapter->priv = adapter; - - - init_MUTEX(&adapter->i2c_sem); - - - memset(&adapter->i2c_adap, 0, sizeof(struct i2c_adapter)); - strcpy(adapter->i2c_adap.name, "SkyStar2"); - - i2c_set_adapdata(&adapter->i2c_adap, adapter); - -#ifdef I2C_ADAP_CLASS_TV_DIGITAL - adapter->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL; -#else - adapter->i2c_adap.class = I2C_CLASS_TV_DIGITAL; -#endif - adapter->i2c_adap.algo = &flexcop_algo; - adapter->i2c_adap.algo_data = NULL; - adapter->i2c_adap.id = I2C_ALGO_BIT; - - ret = i2c_add_adapter(&adapter->i2c_adap); - if (ret < 0) - goto err_dvb_unregister; - - dvbdemux = &adapter->demux; - - dvbdemux->priv = adapter; - dvbdemux->filternum = N_PID_SLOTS; - dvbdemux->feednum = N_PID_SLOTS; - dvbdemux->start_feed = dvb_start_feed; - dvbdemux->stop_feed = dvb_stop_feed; - dvbdemux->write_to_decoder = NULL; - dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); - - ret = dvb_dmx_init(&adapter->demux); - if (ret < 0) - goto err_i2c_del; - - dmx = &dvbdemux->dmx; - - adapter->hw_frontend.source = DMX_FRONTEND_0; - adapter->dmxdev.filternum = N_PID_SLOTS; - adapter->dmxdev.demux = dmx; - adapter->dmxdev.capabilities = 0; - - ret = dvb_dmxdev_init(&adapter->dmxdev, &adapter->dvb_adapter); - if (ret < 0) - goto err_dmx_release; - - ret = dmx->add_frontend(dmx, &adapter->hw_frontend); - if (ret < 0) - goto err_dmxdev_release; - - adapter->mem_frontend.source = DMX_MEMORY_FE; - - ret = dmx->add_frontend(dmx, &adapter->mem_frontend); - if (ret < 0) - goto err_remove_hw_frontend; - - ret = dmx->connect_frontend(dmx, &adapter->hw_frontend); - if (ret < 0) - goto err_remove_mem_frontend; - - dvb_net_init(&adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx); - - frontend_init(adapter); -out: - return ret; - -err_remove_mem_frontend: - dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &adapter->mem_frontend); -err_remove_hw_frontend: - dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &adapter->hw_frontend); -err_dmxdev_release: - dvb_dmxdev_release(&adapter->dmxdev); -err_dmx_release: - dvb_dmx_release(&adapter->demux); -err_i2c_del: - i2c_del_adapter(&adapter->i2c_adap); -err_dvb_unregister: - dvb_unregister_adapter(&adapter->dvb_adapter); -err_halt: - driver_halt(pdev); - goto out; -} - -static void skystar2_remove(struct pci_dev *pdev) -{ - struct adapter *adapter = pci_get_drvdata(pdev); - struct dvb_demux *dvbdemux; - struct dmx_demux *dmx; - - if (!adapter) - return; - - dvb_net_release(&adapter->dvbnet); - dvbdemux = &adapter->demux; - dmx = &dvbdemux->dmx; - - dmx->close(dmx); - dmx->remove_frontend(dmx, &adapter->hw_frontend); - dmx->remove_frontend(dmx, &adapter->mem_frontend); - - dvb_dmxdev_release(&adapter->dmxdev); - dvb_dmx_release(dvbdemux); - - if (adapter->fe != NULL) - dvb_unregister_frontend(adapter->fe); - - dvb_unregister_adapter(&adapter->dvb_adapter); - - i2c_del_adapter(&adapter->i2c_adap); - - driver_halt(pdev); - } - -static struct pci_device_id skystar2_pci_tbl[] = { - {0x000013d0, 0x00002103, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x00000000}, -/* {0x000013d0, 0x00002200, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x00000000}, UNDEFINED HARDWARE - mail linuxtv.org list */ //FCIII - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, skystar2_pci_tbl); - -static struct pci_driver skystar2_pci_driver = { - .name = "SkyStar2", - .id_table = skystar2_pci_tbl, - .probe = skystar2_probe, - .remove = skystar2_remove, -}; - -static int skystar2_init(void) -{ - return pci_register_driver(&skystar2_pci_driver); -} - -static void skystar2_cleanup(void) -{ - pci_unregister_driver(&skystar2_pci_driver); -} - -module_init(skystar2_init); -module_exit(skystar2_cleanup); - -MODULE_DESCRIPTION("Technisat SkyStar2 DVB PCI Driver"); -MODULE_LICENSE("GPL"); |