diff options
Diffstat (limited to 'drivers/media/dvb/b2c2/flexcop.c')
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.c | 324 |
1 files changed, 0 insertions, 324 deletions
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c deleted file mode 100644 index b1e8c99f469..00000000000 --- a/drivers/media/dvb/b2c2/flexcop.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III - * flexcop.c - main module part - * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de> - * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc - * - * Acknowledgements: - * John Jurrius from BBTI, Inc. for extensive support - * with code examples and data books - * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) - * - * Contributions to the skystar2-driver have been done by - * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) - * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) - * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu) - * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac - * filtering) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include "flexcop.h" - -#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" -#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de" - -#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG -#define DEBSTATUS "" -#else -#define DEBSTATUS " (debugging is not enabled)" -#endif - -int b2c2_flexcop_debug; -module_param_named(debug, b2c2_flexcop_debug, int, 0644); -MODULE_PARM_DESC(debug, - "set debug level (1=info,2=tuner,4=i2c,8=ts," - "16=sram,32=reg (|-able))." - DEBSTATUS); -#undef DEBSTATUS - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -/* global zero for ibi values */ -flexcop_ibi_value ibi_zero; - -static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct flexcop_device *fc = dvbdmxfeed->demux->priv; - return flexcop_pid_feed_control(fc, dvbdmxfeed, 1); -} - -static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct flexcop_device *fc = dvbdmxfeed->demux->priv; - return flexcop_pid_feed_control(fc, dvbdmxfeed, 0); -} - -static int flexcop_dvb_init(struct flexcop_device *fc) -{ - int ret = dvb_register_adapter(&fc->dvb_adapter, - "FlexCop Digital TV device", fc->owner, - fc->dev, adapter_nr); - if (ret < 0) { - err("error registering DVB adapter"); - return ret; - } - fc->dvb_adapter.priv = fc; - - fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING - | DMX_MEMORY_BASED_FILTERING); - fc->demux.priv = fc; - fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; - fc->demux.start_feed = flexcop_dvb_start_feed; - fc->demux.stop_feed = flexcop_dvb_stop_feed; - fc->demux.write_to_decoder = NULL; - - ret = dvb_dmx_init(&fc->demux); - if (ret < 0) { - err("dvb_dmx failed: error %d", ret); - goto err_dmx; - } - - fc->hw_frontend.source = DMX_FRONTEND_0; - - fc->dmxdev.filternum = fc->demux.feednum; - fc->dmxdev.demux = &fc->demux.dmx; - fc->dmxdev.capabilities = 0; - ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter); - if (ret < 0) { - err("dvb_dmxdev_init failed: error %d", ret); - goto err_dmx_dev; - } - - ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend); - if (ret < 0) { - err("adding hw_frontend to dmx failed: error %d", ret); - goto err_dmx_add_hw_frontend; - } - - fc->mem_frontend.source = DMX_MEMORY_FE; - ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend); - if (ret < 0) { - err("adding mem_frontend to dmx failed: error %d", ret); - goto err_dmx_add_mem_frontend; - } - - ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend); - if (ret < 0) { - err("connect frontend failed: error %d", ret); - goto err_connect_frontend; - } - - ret = dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); - if (ret < 0) { - err("dvb_net_init failed: error %d", ret); - goto err_net; - } - - fc->init_state |= FC_STATE_DVB_INIT; - return 0; - -err_net: - fc->demux.dmx.disconnect_frontend(&fc->demux.dmx); -err_connect_frontend: - fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend); -err_dmx_add_mem_frontend: - fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend); -err_dmx_add_hw_frontend: - dvb_dmxdev_release(&fc->dmxdev); -err_dmx_dev: - dvb_dmx_release(&fc->demux); -err_dmx: - dvb_unregister_adapter(&fc->dvb_adapter); - return ret; -} - -static void flexcop_dvb_exit(struct flexcop_device *fc) -{ - if (fc->init_state & FC_STATE_DVB_INIT) { - dvb_net_release(&fc->dvbnet); - - fc->demux.dmx.close(&fc->demux.dmx); - fc->demux.dmx.remove_frontend(&fc->demux.dmx, - &fc->mem_frontend); - fc->demux.dmx.remove_frontend(&fc->demux.dmx, - &fc->hw_frontend); - dvb_dmxdev_release(&fc->dmxdev); - dvb_dmx_release(&fc->demux); - dvb_unregister_adapter(&fc->dvb_adapter); - deb_info("deinitialized dvb stuff\n"); - } - fc->init_state &= ~FC_STATE_DVB_INIT; -} - -/* these methods are necessary to achieve the long-term-goal of hiding the - * struct flexcop_device from the bus-parts */ -void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) -{ - dvb_dmx_swfilter(&fc->demux, buf, len); -} -EXPORT_SYMBOL(flexcop_pass_dmx_data); - -void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) -{ - dvb_dmx_swfilter_packets(&fc->demux, buf, no); -} -EXPORT_SYMBOL(flexcop_pass_dmx_packets); - -static void flexcop_reset(struct flexcop_device *fc) -{ - flexcop_ibi_value v210, v204; - - /* reset the flexcop itself */ - fc->write_ibi_reg(fc,ctrl_208,ibi_zero); - - v210.raw = 0; - v210.sw_reset_210.reset_block_000 = 1; - v210.sw_reset_210.reset_block_100 = 1; - v210.sw_reset_210.reset_block_200 = 1; - v210.sw_reset_210.reset_block_300 = 1; - v210.sw_reset_210.reset_block_400 = 1; - v210.sw_reset_210.reset_block_500 = 1; - v210.sw_reset_210.reset_block_600 = 1; - v210.sw_reset_210.reset_block_700 = 1; - v210.sw_reset_210.Block_reset_enable = 0xb2; - v210.sw_reset_210.Special_controls = 0xc259; - fc->write_ibi_reg(fc,sw_reset_210,v210); - msleep(1); - - /* reset the periphical devices */ - - v204 = fc->read_ibi_reg(fc,misc_204); - v204.misc_204.Per_reset_sig = 0; - fc->write_ibi_reg(fc,misc_204,v204); - msleep(1); - v204.misc_204.Per_reset_sig = 1; - fc->write_ibi_reg(fc,misc_204,v204); -} - -void flexcop_reset_block_300(struct flexcop_device *fc) -{ - flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208), - v210 = fc->read_ibi_reg(fc, sw_reset_210); - - deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw); - fc->write_ibi_reg(fc,ctrl_208,ibi_zero); - - v210.sw_reset_210.reset_block_300 = 1; - v210.sw_reset_210.Block_reset_enable = 0xb2; - - fc->write_ibi_reg(fc,sw_reset_210,v210); - fc->write_ibi_reg(fc,ctrl_208,v208_save); -} - -struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) -{ - void *bus; - struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), - GFP_KERNEL); - if (!fc) { - err("no memory"); - return NULL; - } - - bus = kzalloc(bus_specific_len, GFP_KERNEL); - if (!bus) { - err("no memory"); - kfree(fc); - return NULL; - } - - fc->bus_specific = bus; - - return fc; -} -EXPORT_SYMBOL(flexcop_device_kmalloc); - -void flexcop_device_kfree(struct flexcop_device *fc) -{ - kfree(fc->bus_specific); - kfree(fc); -} -EXPORT_SYMBOL(flexcop_device_kfree); - -int flexcop_device_initialize(struct flexcop_device *fc) -{ - int ret; - ibi_zero.raw = 0; - - flexcop_reset(fc); - flexcop_determine_revision(fc); - flexcop_sram_init(fc); - flexcop_hw_filter_init(fc); - flexcop_smc_ctrl(fc, 0); - - ret = flexcop_dvb_init(fc); - if (ret) - goto error; - - /* i2c has to be done before doing EEProm stuff - - * because the EEProm is accessed via i2c */ - ret = flexcop_i2c_init(fc); - if (ret) - goto error; - - /* do the MAC address reading after initializing the dvb_adapter */ - if (fc->get_mac_addr(fc, 0) == 0) { - u8 *b = fc->dvb_adapter.proposed_mac; - info("MAC address = %pM", b); - flexcop_set_mac_filter(fc,b); - flexcop_mac_filter_ctrl(fc,1); - } else - warn("reading of MAC address failed.\n"); - - ret = flexcop_frontend_init(fc); - if (ret) - goto error; - - flexcop_device_name(fc,"initialization of","complete"); - return 0; - -error: - flexcop_device_exit(fc); - return ret; -} -EXPORT_SYMBOL(flexcop_device_initialize); - -void flexcop_device_exit(struct flexcop_device *fc) -{ - flexcop_frontend_exit(fc); - flexcop_i2c_exit(fc); - flexcop_dvb_exit(fc); -} -EXPORT_SYMBOL(flexcop_device_exit); - -static int flexcop_module_init(void) -{ - info(DRIVER_NAME " loaded successfully"); - return 0; -} - -static void flexcop_module_cleanup(void) -{ - info(DRIVER_NAME " unloaded successfully"); -} - -module_init(flexcop_module_init); -module_exit(flexcop_module_cleanup); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_NAME); -MODULE_LICENSE("GPL"); |