diff options
Diffstat (limited to 'drivers/md/raid1.h')
| -rw-r--r-- | drivers/md/raid1.h | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h new file mode 100644 index 00000000000..0a9ba7c3302 --- /dev/null +++ b/drivers/md/raid1.h @@ -0,0 +1,134 @@ +#ifndef _RAID1_H +#define _RAID1_H + +#include <linux/raid/md.h> + +typedef struct mirror_info mirror_info_t; + +struct mirror_info { + mdk_rdev_t *rdev; + sector_t head_position; +}; + +/* + * memory pools need a pointer to the mddev, so they can force an unplug + * when memory is tight, and a count of the number of drives that the + * pool was allocated for, so they know how much to allocate and free. + * mddev->raid_disks cannot be used, as it can change while a pool is active + * These two datums are stored in a kmalloced struct. + */ + +struct pool_info { + mddev_t *mddev; + int raid_disks; +}; + + +typedef struct r1bio_s r1bio_t; + +struct r1_private_data_s { + mddev_t *mddev; + mirror_info_t *mirrors; + int raid_disks; + int last_used; + sector_t next_seq_sect; + spinlock_t device_lock; + + struct list_head retry_list; + /* queue pending writes and submit them on unplug */ + struct bio_list pending_bio_list; + /* queue of writes that have been unplugged */ + struct bio_list flushing_bio_list; + + /* for use when syncing mirrors: */ + + spinlock_t resync_lock; + int nr_pending; + int nr_waiting; + int nr_queued; + int barrier; + sector_t next_resync; + int fullsync; /* set to 1 if a full sync is needed, + * (fresh device added). + * Cleared when a sync completes. + */ + + wait_queue_head_t wait_barrier; + + struct pool_info *poolinfo; + + struct page *tmppage; + + mempool_t *r1bio_pool; + mempool_t *r1buf_pool; +}; + +typedef struct r1_private_data_s conf_t; + +/* + * this is the only point in the RAID code where we violate + * C type safety. mddev->private is an 'opaque' pointer. + */ +#define mddev_to_conf(mddev) ((conf_t *) mddev->private) + +/* + * this is our 'private' RAID1 bio. + * + * it contains information about what kind of IO operations were started + * for this RAID1 operation, and about their status: + */ + +struct r1bio_s { + atomic_t remaining; /* 'have we finished' count, + * used from IRQ handlers + */ + atomic_t behind_remaining; /* number of write-behind ios remaining + * in this BehindIO request + */ + sector_t sector; + int sectors; + unsigned long state; + mddev_t *mddev; + /* + * original bio going to /dev/mdx + */ + struct bio *master_bio; + /* + * if the IO is in READ direction, then this is where we read + */ + int read_disk; + + struct list_head retry_list; + struct bitmap_update *bitmap_update; + /* + * if the IO is in WRITE direction, then multiple bios are used. + * We choose the number when they are allocated. + */ + struct bio *bios[0]; + /* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/ +}; + +/* when we get a read error on a read-only array, we redirect to another + * device without failing the first device, or trying to over-write to + * correct the read error. To keep track of bad blocks on a per-bio + * level, we store IO_BLOCKED in the appropriate 'bios' pointer + */ +#define IO_BLOCKED ((struct bio*)1) + +/* bits for r1bio.state */ +#define R1BIO_Uptodate 0 +#define R1BIO_IsSync 1 +#define R1BIO_Degraded 2 +#define R1BIO_BehindIO 3 +#define R1BIO_Barrier 4 +#define R1BIO_BarrierRetry 5 +/* For write-behind requests, we call bi_end_io when + * the last non-write-behind device completes, providing + * any write was successful. Otherwise we call when + * any write-behind write succeeds, otherwise we call + * with failure when last write completes (and all failed). + * Record that bi_end_io was called with this flag... + */ +#define R1BIO_Returned 6 + +#endif |