diff options
Diffstat (limited to 'drivers/lguest/x86/core.c')
| -rw-r--r-- | drivers/lguest/x86/core.c | 476 |
1 files changed, 476 insertions, 0 deletions
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c new file mode 100644 index 00000000000..e2f46b16ce3 --- /dev/null +++ b/drivers/lguest/x86/core.c @@ -0,0 +1,476 @@ +/* + * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation. + * Copyright (C) 2007, Jes Sorensen <jes@sgi.com> SGI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/start_kernel.h> +#include <linux/string.h> +#include <linux/console.h> +#include <linux/screen_info.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/cpu.h> +#include <linux/lguest.h> +#include <linux/lguest_launcher.h> +#include <linux/lguest_bus.h> +#include <asm/paravirt.h> +#include <asm/param.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/desc.h> +#include <asm/setup.h> +#include <asm/lguest.h> +#include <asm/uaccess.h> +#include <asm/i387.h> +#include "../lg.h" + +static int cpu_had_pge; + +static struct { + unsigned long offset; + unsigned short segment; +} lguest_entry; + +/* Offset from where switcher.S was compiled to where we've copied it */ +static unsigned long switcher_offset(void) +{ + return SWITCHER_ADDR - (unsigned long)start_switcher_text; +} + +/* This cpu's struct lguest_pages. */ +static struct lguest_pages *lguest_pages(unsigned int cpu) +{ + return &(((struct lguest_pages *) + (SWITCHER_ADDR + SHARED_SWITCHER_PAGES*PAGE_SIZE))[cpu]); +} + +static DEFINE_PER_CPU(struct lguest *, last_guest); + +/*S:010 + * We are getting close to the Switcher. + * + * Remember that each CPU has two pages which are visible to the Guest when it + * runs on that CPU. This has to contain the state for that Guest: we copy the + * state in just before we run the Guest. + * + * Each Guest has "changed" flags which indicate what has changed in the Guest + * since it last ran. We saw this set in interrupts_and_traps.c and + * segments.c. + */ +static void copy_in_guest_info(struct lguest *lg, struct lguest_pages *pages) +{ + /* Copying all this data can be quite expensive. We usually run the + * same Guest we ran last time (and that Guest hasn't run anywhere else + * meanwhile). If that's not the case, we pretend everything in the + * Guest has changed. */ + if (__get_cpu_var(last_guest) != lg || lg->last_pages != pages) { + __get_cpu_var(last_guest) = lg; + lg->last_pages = pages; + lg->changed = CHANGED_ALL; + } + + /* These copies are pretty cheap, so we do them unconditionally: */ + /* Save the current Host top-level page directory. */ + pages->state.host_cr3 = __pa(current->mm->pgd); + /* Set up the Guest's page tables to see this CPU's pages (and no + * other CPU's pages). */ + map_switcher_in_guest(lg, pages); + /* Set up the two "TSS" members which tell the CPU what stack to use + * for traps which do directly into the Guest (ie. traps at privilege + * level 1). */ + pages->state.guest_tss.esp1 = lg->esp1; + pages->state.guest_tss.ss1 = lg->ss1; + + /* Copy direct-to-Guest trap entries. */ + if (lg->changed & CHANGED_IDT) + copy_traps(lg, pages->state.guest_idt, default_idt_entries); + + /* Copy all GDT entries which the Guest can change. */ + if (lg->changed & CHANGED_GDT) + copy_gdt(lg, pages->state.guest_gdt); + /* If only the TLS entries have changed, copy them. */ + else if (lg->changed & CHANGED_GDT_TLS) + copy_gdt_tls(lg, pages->state.guest_gdt); + + /* Mark the Guest as unchanged for next time. */ + lg->changed = 0; +} + +/* Finally: the code to actually call into the Switcher to run the Guest. */ +static void run_guest_once(struct lguest *lg, struct lguest_pages *pages) +{ + /* This is a dummy value we need for GCC's sake. */ + unsigned int clobber; + + /* Copy the guest-specific information into this CPU's "struct + * lguest_pages". */ + copy_in_guest_info(lg, pages); + + /* Set the trap number to 256 (impossible value). If we fault while + * switching to the Guest (bad segment registers or bug), this will + * cause us to abort the Guest. */ + lg->regs->trapnum = 256; + + /* Now: we push the "eflags" register on the stack, then do an "lcall". + * This is how we change from using the kernel code segment to using + * the dedicated lguest code segment, as well as jumping into the + * Switcher. + * + * The lcall also pushes the old code segment (KERNEL_CS) onto the + * stack, then the address of this call. This stack layout happens to + * exactly match the stack of an interrupt... */ + asm volatile("pushf; lcall *lguest_entry" + /* This is how we tell GCC that %eax ("a") and %ebx ("b") + * are changed by this routine. The "=" means output. */ + : "=a"(clobber), "=b"(clobber) + /* %eax contains the pages pointer. ("0" refers to the + * 0-th argument above, ie "a"). %ebx contains the + * physical address of the Guest's top-level page + * directory. */ + : "0"(pages), "1"(__pa(lg->pgdirs[lg->pgdidx].pgdir)) + /* We tell gcc that all these registers could change, + * which means we don't have to save and restore them in + * the Switcher. */ + : "memory", "%edx", "%ecx", "%edi", "%esi"); +} +/*:*/ + +/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts + * are disabled: we own the CPU. */ +void lguest_arch_run_guest(struct lguest *lg) +{ + /* Remember the awfully-named TS bit? If the Guest has asked + * to set it we set it now, so we can trap and pass that trap + * to the Guest if it uses the FPU. */ + if (lg->ts) + lguest_set_ts(); + + /* SYSENTER is an optimized way of doing system calls. We + * can't allow it because it always jumps to privilege level 0. + * A normal Guest won't try it because we don't advertise it in + * CPUID, but a malicious Guest (or malicious Guest userspace + * program) could, so we tell the CPU to disable it before + * running the Guest. */ + if (boot_cpu_has(X86_FEATURE_SEP)) + wrmsr(MSR_IA32_SYSENTER_CS, 0, 0); + + /* Now we actually run the Guest. It will pop back out when + * something interesting happens, and we can examine its + * registers to see what it was doing. */ + run_guest_once(lg, lguest_pages(raw_smp_processor_id())); + + /* The "regs" pointer contains two extra entries which are not + * really registers: a trap number which says what interrupt or + * trap made the switcher code come back, and an error code + * which some traps set. */ + + /* If the Guest page faulted, then the cr2 register will tell + * us the bad virtual address. We have to grab this now, + * because once we re-enable interrupts an interrupt could + * fault and thus overwrite cr2, or we could even move off to a + * different CPU. */ + if (lg->regs->trapnum == 14) + lg->arch.last_pagefault = read_cr2(); + /* Similarly, if we took a trap because the Guest used the FPU, + * we have to restore the FPU it expects to see. */ + else if (lg->regs->trapnum == 7) + math_state_restore(); + + /* Restore SYSENTER if it's supposed to be on. */ + if (boot_cpu_has(X86_FEATURE_SEP)) + wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); +} + +/*H:130 Our Guest is usually so well behaved; it never tries to do things it + * isn't allowed to. Unfortunately, Linux's paravirtual infrastructure isn't + * quite complete, because it doesn't contain replacements for the Intel I/O + * instructions. As a result, the Guest sometimes fumbles across one during + * the boot process as it probes for various things which are usually attached + * to a PC. + * + * When the Guest uses one of these instructions, we get trap #13 (General + * Protection Fault) and come here. We see if it's one of those troublesome + * instructions and skip over it. We return true if we did. */ +static int emulate_insn(struct lguest *lg) +{ + u8 insn; + unsigned int insnlen = 0, in = 0, shift = 0; + /* The eip contains the *virtual* address of the Guest's instruction: + * guest_pa just subtracts the Guest's page_offset. */ + unsigned long physaddr = guest_pa(lg, lg->regs->eip); + + /* The guest_pa() function only works for Guest kernel addresses, but + * that's all we're trying to do anyway. */ + if (lg->regs->eip < lg->page_offset) + return 0; + + /* Decoding x86 instructions is icky. */ + lgread(lg, &insn, physaddr, 1); + + /* 0x66 is an "operand prefix". It means it's using the upper 16 bits + of the eax register. */ + if (insn == 0x66) { + shift = 16; + /* The instruction is 1 byte so far, read the next byte. */ + insnlen = 1; + lgread(lg, &insn, physaddr + insnlen, 1); + } + + /* We can ignore the lower bit for the moment and decode the 4 opcodes + * we need to emulate. */ + switch (insn & 0xFE) { + case 0xE4: /* in <next byte>,%al */ + insnlen += 2; + in = 1; + break; + case 0xEC: /* in (%dx),%al */ + insnlen += 1; + in = 1; + break; + case 0xE6: /* out %al,<next byte> */ + insnlen += 2; + break; + case 0xEE: /* out %al,(%dx) */ + insnlen += 1; + break; + default: + /* OK, we don't know what this is, can't emulate. */ + return 0; + } + + /* If it was an "IN" instruction, they expect the result to be read + * into %eax, so we change %eax. We always return all-ones, which + * traditionally means "there's nothing there". */ + if (in) { + /* Lower bit tells is whether it's a 16 or 32 bit access */ + if (insn & 0x1) + lg->regs->eax = 0xFFFFFFFF; + else + lg->regs->eax |= (0xFFFF << shift); + } + /* Finally, we've "done" the instruction, so move past it. */ + lg->regs->eip += insnlen; + /* Success! */ + return 1; +} + +/*H:050 Once we've re-enabled interrupts, we look at why the Guest exited. */ +void lguest_arch_handle_trap(struct lguest *lg) +{ + switch (lg->regs->trapnum) { + case 13: /* We've intercepted a GPF. */ + /* Check if this was one of those annoying IN or OUT + * instructions which we need to emulate. If so, we + * just go back into the Guest after we've done it. */ + if (lg->regs->errcode == 0) { + if (emulate_insn(lg)) + return; + } + break; + case 14: /* We've intercepted a page fault. */ + /* The Guest accessed a virtual address that wasn't + * mapped. This happens a lot: we don't actually set + * up most of the page tables for the Guest at all when + * we start: as it runs it asks for more and more, and + * we set them up as required. In this case, we don't + * even tell the Guest that the fault happened. + * + * The errcode tells whether this was a read or a + * write, and whether kernel or userspace code. */ + if (demand_page(lg, lg->arch.last_pagefault, lg->regs->errcode)) + return; + + /* OK, it's really not there (or not OK): the Guest + * needs to know. We write out the cr2 value so it + * knows where the fault occurred. + * + * Note that if the Guest were really messed up, this + * could happen before it's done the INITIALIZE + * hypercall, so lg->lguest_data will be NULL */ + if (lg->lguest_data && + put_user(lg->arch.last_pagefault, &lg->lguest_data->cr2)) + kill_guest(lg, "Writing cr2"); + break; + case 7: /* We've intercepted a Device Not Available fault. */ + /* If the Guest doesn't want to know, we already + * restored the Floating Point Unit, so we just + * continue without telling it. */ + if (!lg->ts) + return; + break; + case 32 ... 255: + /* These values mean a real interrupt occurred, in + * which case the Host handler has already been run. + * We just do a friendly check if another process + * should now be run, then fall through to loop + * around: */ + cond_resched(); + case LGUEST_TRAP_ENTRY: /* Handled before re-entering Guest */ + return; + } + + /* We didn't handle the trap, so it needs to go to the Guest. */ + if (!deliver_trap(lg, lg->regs->trapnum)) + /* If the Guest doesn't have a handler (either it hasn't + * registered any yet, or it's one of the faults we don't let + * it handle), it dies with a cryptic error message. */ + kill_guest(lg, "unhandled trap %li at %#lx (%#lx)", + lg->regs->trapnum, lg->regs->eip, + lg->regs->trapnum == 14 ? lg->arch.last_pagefault + : lg->regs->errcode); +} + +/* Now we can look at each of the routines this calls, in increasing order of + * complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(), + * deliver_trap() and demand_page(). After all those, we'll be ready to + * examine the Switcher, and our philosophical understanding of the Host/Guest + * duality will be complete. :*/ +static void adjust_pge(void *on) +{ + if (on) + write_cr4(read_cr4() | X86_CR4_PGE); + else + write_cr4(read_cr4() & ~X86_CR4_PGE); +} + +/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do + * some more i386-specific initialization. */ +void __init lguest_arch_host_init(void) +{ + int i; + + /* Most of the i386/switcher.S doesn't care that it's been moved; on + * Intel, jumps are relative, and it doesn't access any references to + * external code or data. + * + * The only exception is the interrupt handlers in switcher.S: their + * addresses are placed in a table (default_idt_entries), so we need to + * update the table with the new addresses. switcher_offset() is a + * convenience function which returns the distance between the builtin + * switcher code and the high-mapped copy we just made. */ + for (i = 0; i < IDT_ENTRIES; i++) + default_idt_entries[i] += switcher_offset(); + + /* + * Set up the Switcher's per-cpu areas. + * + * Each CPU gets two pages of its own within the high-mapped region + * (aka. "struct lguest_pages"). Much of this can be initialized now, + * but some depends on what Guest we are running (which is set up in + * copy_in_guest_info()). + */ + for_each_possible_cpu(i) { + /* lguest_pages() returns this CPU's two pages. */ + struct lguest_pages *pages = lguest_pages(i); + /* This is a convenience pointer to make the code fit one + * statement to a line. */ + struct lguest_ro_state *state = &pages->state; + + /* The Global Descriptor Table: the Host has a different one + * for each CPU. We keep a descriptor for the GDT which says + * where it is and how big it is (the size is actually the last + * byte, not the size, hence the "-1"). */ + state->host_gdt_desc.size = GDT_SIZE-1; + state->host_gdt_desc.address = (long)get_cpu_gdt_table(i); + + /* All CPUs on the Host use the same Interrupt Descriptor + * Table, so we just use store_idt(), which gets this CPU's IDT + * descriptor. */ + store_idt(&state->host_idt_desc); + + /* The descriptors for the Guest's GDT and IDT can be filled + * out now, too. We copy the GDT & IDT into ->guest_gdt and + * ->guest_idt before actually running the Guest. */ + state->guest_idt_desc.size = sizeof(state->guest_idt)-1; + state->guest_idt_desc.address = (long)&state->guest_idt; + state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1; + state->guest_gdt_desc.address = (long)&state->guest_gdt; + + /* We know where we want the stack to be when the Guest enters + * the switcher: in pages->regs. The stack grows upwards, so + * we start it at the end of that structure. */ + state->guest_tss.esp0 = (long)(&pages->regs + 1); + /* And this is the GDT entry to use for the stack: we keep a + * couple of special LGUEST entries. */ + state->guest_tss.ss0 = LGUEST_DS; + + /* x86 can have a finegrained bitmap which indicates what I/O + * ports the process can use. We set it to the end of our + * structure, meaning "none". */ + state->guest_tss.io_bitmap_base = sizeof(state->guest_tss); + + /* Some GDT entries are the same across all Guests, so we can + * set them up now. */ + setup_default_gdt_entries(state); + /* Most IDT entries are the same for all Guests, too.*/ + setup_default_idt_entries(state, default_idt_entries); + + /* The Host needs to be able to use the LGUEST segments on this + * CPU, too, so put them in the Host GDT. */ + get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT; + get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT; + } + + /* In the Switcher, we want the %cs segment register to use the + * LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so + * it will be undisturbed when we switch. To change %cs and jump we + * need this structure to feed to Intel's "lcall" instruction. */ + lguest_entry.offset = (long)switch_to_guest + switcher_offset(); + lguest_entry.segment = LGUEST_CS; + + /* Finally, we need to turn off "Page Global Enable". PGE is an + * optimization where page table entries are specially marked to show + * they never change. The Host kernel marks all the kernel pages this + * way because it's always present, even when userspace is running. + * + * Lguest breaks this: unbeknownst to the rest of the Host kernel, we + * switch to the Guest kernel. If you don't disable this on all CPUs, + * you'll get really weird bugs that you'll chase for two days. + * + * I used to turn PGE off every time we switched to the Guest and back + * on when we return, but that slowed the Switcher down noticibly. */ + + /* We don't need the complexity of CPUs coming and going while we're + * doing this. */ + lock_cpu_hotplug(); + if (cpu_has_pge) { /* We have a broader idea of "global". */ + /* Remember that this was originally set (for cleanup). */ + cpu_had_pge = 1; + /* adjust_pge is a helper function which sets or unsets the PGE + * bit on its CPU, depending on the argument (0 == unset). */ + on_each_cpu(adjust_pge, (void *)0, 0, 1); + /* Turn off the feature in the global feature set. */ + clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability); + } + unlock_cpu_hotplug(); +}; +/*:*/ + +void __exit lguest_arch_host_fini(void) +{ + /* If we had PGE before we started, turn it back on now. */ + lock_cpu_hotplug(); + if (cpu_had_pge) { + set_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability); + /* adjust_pge's argument "1" means set PGE. */ + on_each_cpu(adjust_pge, (void *)1, 0, 1); + } + unlock_cpu_hotplug(); +} |