aboutsummaryrefslogtreecommitdiff
path: root/drivers/isdn/i4l
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/i4l')
-rw-r--r--drivers/isdn/i4l/isdn_common.c5
-rw-r--r--drivers/isdn/i4l/isdn_tty.c466
2 files changed, 179 insertions, 292 deletions
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index d9f5524593f..8c610fa6782 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -46,7 +46,6 @@ static DEFINE_MUTEX(isdn_mutex);
static char *isdn_revision = "$Revision: 1.1.2.3 $";
extern char *isdn_net_revision;
-extern char *isdn_tty_revision;
#ifdef CONFIG_ISDN_PPP
extern char *isdn_ppp_revision;
#else
@@ -2327,8 +2326,6 @@ static int __init isdn_init(void)
dev->chanmap[i] = -1;
dev->m_idx[i] = -1;
strcpy(dev->num[i], "???");
- init_waitqueue_head(&dev->mdm.info[i].open_wait);
- init_waitqueue_head(&dev->mdm.info[i].close_wait);
}
if (register_chrdev(ISDN_MAJOR, "isdn", &isdn_fops)) {
printk(KERN_WARNING "isdn: Could not register control devices\n");
@@ -2353,8 +2350,6 @@ static int __init isdn_init(void)
strcpy(tmprev, isdn_revision);
printk(KERN_NOTICE "ISDN subsystem Rev: %s/", isdn_getrev(tmprev));
- strcpy(tmprev, isdn_tty_revision);
- printk("%s/", isdn_getrev(tmprev));
strcpy(tmprev, isdn_net_revision);
printk("%s/", isdn_getrev(tmprev));
strcpy(tmprev, isdn_ppp_revision);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3831abdbc66..7bc50670d7d 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1,5 +1,4 @@
-/* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $
- *
+/*
* Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
*
* Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de)
@@ -12,6 +11,7 @@
#undef ISDN_TTY_STAT_DEBUG
#include <linux/isdn.h>
+#include <linux/serial.h> /* ASYNC_* flags */
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mutex.h>
@@ -48,9 +48,6 @@ static int bit2si[8] =
static int si2bit[8] =
{4, 1, 4, 4, 4, 4, 4, 4};
-char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
-
-
/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
* to stuff incoming data directly into a tty's flip-buffer. This
* is done to speed up tty-receiving if the receive-queue is empty.
@@ -68,49 +65,54 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
struct tty_struct *tty;
char last;
- if (info->online) {
- if ((tty = info->tty)) {
- if (info->mcr & UART_MCR_RTS) {
- len = skb->len
+ if (!info->online)
+ return 0;
+
+ tty = info->port.tty;
+ if (!tty)
+ return 0;
+
+ if (!(info->mcr & UART_MCR_RTS))
+ return 0;
+
+ len = skb->len
#ifdef CONFIG_ISDN_AUDIO
- + ISDN_AUDIO_SKB_DLECOUNT(skb)
+ + ISDN_AUDIO_SKB_DLECOUNT(skb)
#endif
- ;
+ ;
+
+ c = tty_buffer_request_room(tty, len);
+ if (c < len)
+ return 0;
- c = tty_buffer_request_room(tty, len);
- if (c >= len) {
-#ifdef CONFIG_ISDN_AUDIO
- if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
- int l = skb->len;
- unsigned char *dp = skb->data;
- while (--l) {
- if (*dp == DLE)
- tty_insert_flip_char(tty, DLE, 0);
- tty_insert_flip_char(tty, *dp++, 0);
- }
- if (*dp == DLE)
- tty_insert_flip_char(tty, DLE, 0);
- last = *dp;
- } else {
-#endif
- if (len > 1)
- tty_insert_flip_string(tty, skb->data, len - 1);
- last = skb->data[len - 1];
#ifdef CONFIG_ISDN_AUDIO
- }
+ if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
+ int l = skb->len;
+ unsigned char *dp = skb->data;
+ while (--l) {
+ if (*dp == DLE)
+ tty_insert_flip_char(tty, DLE, 0);
+ tty_insert_flip_char(tty, *dp++, 0);
+ }
+ if (*dp == DLE)
+ tty_insert_flip_char(tty, DLE, 0);
+ last = *dp;
+ } else {
#endif
- if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
- tty_insert_flip_char(tty, last, 0xFF);
- else
- tty_insert_flip_char(tty, last, TTY_NORMAL);
- tty_flip_buffer_push(tty);
- kfree_skb(skb);
- return 1;
- }
- }
- }
+ if (len > 1)
+ tty_insert_flip_string(tty, skb->data, len - 1);
+ last = skb->data[len - 1];
+#ifdef CONFIG_ISDN_AUDIO
}
- return 0;
+#endif
+ if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
+ tty_insert_flip_char(tty, last, 0xFF);
+ else
+ tty_insert_flip_char(tty, last, TTY_NORMAL);
+ tty_flip_buffer_push(tty);
+ kfree_skb(skb);
+
+ return 1;
}
/* isdn_tty_readmodem() is called periodically from within timer-interrupt.
@@ -128,35 +130,39 @@ isdn_tty_readmodem(void)
modem_info *info;
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
- if ((midx = dev->m_idx[i]) >= 0) {
- info = &dev->mdm.info[midx];
- if (info->online) {
- r = 0;
+ midx = dev->m_idx[i];
+ if (midx < 0)
+ continue;
+
+ info = &dev->mdm.info[midx];
+ if (!info->online)
+ continue;
+
+ r = 0;
#ifdef CONFIG_ISDN_AUDIO
- isdn_audio_eval_dtmf(info);
- if ((info->vonline & 1) && (info->emu.vpar[1]))
- isdn_audio_eval_silence(info);
-#endif
- if ((tty = info->tty)) {
- if (info->mcr & UART_MCR_RTS) {
- /* CISCO AsyncPPP Hack */
- if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
- r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
- else
- r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
- if (r)
- tty_flip_buffer_push(tty);
- } else
- r = 1;
- } else
- r = 1;
- if (r) {
- info->rcvsched = 0;
- resched = 1;
- } else
- info->rcvsched = 1;
- }
- }
+ isdn_audio_eval_dtmf(info);
+ if ((info->vonline & 1) && (info->emu.vpar[1]))
+ isdn_audio_eval_silence(info);
+#endif
+ tty = info->port.tty;
+ if (tty) {
+ if (info->mcr & UART_MCR_RTS) {
+ /* CISCO AsyncPPP Hack */
+ if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
+ r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
+ else
+ r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
+ if (r)
+ tty_flip_buffer_push(tty);
+ } else
+ r = 1;
+ } else
+ r = 1;
+ if (r) {
+ info->rcvsched = 0;
+ resched = 1;
+ } else
+ info->rcvsched = 1;
}
if (!resched)
isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
@@ -294,7 +300,7 @@ isdn_tty_tint(modem_info *info)
len = skb->len;
if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
info->isdn_channel, 1, skb)) == len) {
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->port.tty;
info->send_outstanding++;
info->msr &= ~UART_MSR_CTS;
info->lsr &= ~UART_LSR_TEMT;
@@ -327,7 +333,7 @@ isdn_tty_countDLE(unsigned char *buf, int len)
static int
isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
{
- unsigned char *p = &info->xmit_buf[info->xmit_count];
+ unsigned char *p = &info->port.xmit_buf[info->xmit_count];
int count = 0;
while (len > 0) {
@@ -471,7 +477,7 @@ isdn_tty_senddown(modem_info *info)
return;
}
skb_reserve(skb, skb_res);
- memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
+ memcpy(skb_put(skb, buflen), info->port.xmit_buf, buflen);
info->xmit_count = 0;
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 2) {
@@ -699,7 +705,7 @@ isdn_tty_modem_hup(modem_info *info, int local)
printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
#endif
info->rcvsched = 0;
- isdn_tty_flush_buffer(info->tty);
+ isdn_tty_flush_buffer(info->port.tty);
if (info->online) {
info->last_lhup = local;
info->online = 0;
@@ -997,20 +1003,21 @@ isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
static void
isdn_tty_change_speed(modem_info *info)
{
+ struct tty_port *port = &info->port;
uint cflag,
cval,
quot;
int i;
- if (!info->tty || !info->tty->termios)
+ if (!port->tty || !port->tty->termios)
return;
- cflag = info->tty->termios->c_cflag;
+ cflag = port->tty->termios->c_cflag;
quot = i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 2)
- info->tty->termios->c_cflag &= ~CBAUDEX;
+ port->tty->termios->c_cflag &= ~CBAUDEX;
else
i += 15;
}
@@ -1040,20 +1047,20 @@ isdn_tty_change_speed(modem_info *info)
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
- info->flags |= ISDN_ASYNC_CTS_FLOW;
+ port->flags |= ASYNC_CTS_FLOW;
} else
- info->flags &= ~ISDN_ASYNC_CTS_FLOW;
+ port->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ISDN_ASYNC_CHECK_CD;
+ port->flags &= ~ASYNC_CHECK_CD;
else {
- info->flags |= ISDN_ASYNC_CHECK_CD;
+ port->flags |= ASYNC_CHECK_CD;
}
}
static int
isdn_tty_startup(modem_info *info)
{
- if (info->flags & ISDN_ASYNC_INITIALIZED)
+ if (info->port.flags & ASYNC_INITIALIZED)
return 0;
isdn_lock_drivers();
#ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1063,14 +1070,14 @@ isdn_tty_startup(modem_info *info)
* Now, initialize the UART
*/
info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
/*
* and set the speed of the serial port
*/
isdn_tty_change_speed(info);
- info->flags |= ISDN_ASYNC_INITIALIZED;
+ info->port.flags |= ASYNC_INITIALIZED;
info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
info->send_outstanding = 0;
return 0;
@@ -1083,14 +1090,14 @@ isdn_tty_startup(modem_info *info)
static void
isdn_tty_shutdown(modem_info *info)
{
- if (!(info->flags & ISDN_ASYNC_INITIALIZED))
+ if (!(info->port.flags & ASYNC_INITIALIZED))
return;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
#endif
isdn_unlock_drivers();
info->msr &= ~UART_MSR_RI;
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
isdn_tty_modem_reset_regs(info, 0);
@@ -1100,10 +1107,10 @@ isdn_tty_shutdown(modem_info *info)
isdn_tty_modem_hup(info, 1);
}
}
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->flags &= ~ISDN_ASYNC_INITIALIZED;
+ info->port.flags &= ~ASYNC_INITIALIZED;
}
/* isdn_tty_write() is the main send-routine. It is called from the upper
@@ -1146,7 +1153,7 @@ isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
&(m->pluscount),
&(m->lastplus));
- memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
+ memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline) {
int cc = isdn_tty_handleDLEdown(info, m, c);
@@ -1478,107 +1485,6 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* isdn_tty_open() and friends
* ------------------------------------------------------------
*/
-static int
-isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *info)
-{
- DECLARE_WAITQUEUE(wait, NULL);
- int do_clocal = 0;
- int retval;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) ||
- (info->flags & ISDN_ASYNC_CLOSING)) {
- if (info->flags & ISDN_ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
-#ifdef MODEM_DO_RESTART
- if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
- return -EBUSY;
- info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
- return 0;
- }
- if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
- if (info->normal_termios.c_cflag & CLOCAL)
- do_clocal = 1;
- } else {
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
- }
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * isdn_tty_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
- info->line, info->count);
-#endif
- if (!(tty_hung_up_p(filp)))
- info->count--;
- info->blocked_open++;
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->flags & ISDN_ASYNC_INITIALIZED)) {
-#ifdef MODEM_DO_RESTART
- if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
- !(info->flags & ISDN_ASYNC_CLOSING) &&
- (do_clocal || (info->msr & UART_MSR_DCD))) {
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
- info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef ISDN_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
- info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
- return 0;
-}
/*
* This routine is called whenever a serial port is opened. It
@@ -1589,23 +1495,22 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
static int
isdn_tty_open(struct tty_struct *tty, struct file *filp)
{
+ struct tty_port *port;
modem_info *info;
int retval;
info = &dev->mdm.info[tty->index];
if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
return -ENODEV;
- if (!try_module_get(info->owner)) {
- printk(KERN_WARNING "%s: cannot reserve module\n", __func__);
- return -ENODEV;
- }
+ port = &info->port;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
- info->count);
+ port->count);
#endif
- info->count++;
+ port->count++;
tty->driver_data = info;
- info->tty = tty;
+ port->tty = tty;
+ tty->port = port;
/*
* Start up serial port
*/
@@ -1614,15 +1519,13 @@ isdn_tty_open(struct tty_struct *tty, struct file *filp)
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open return after startup\n");
#endif
- module_put(info->owner);
return retval;
}
- retval = isdn_tty_block_til_ready(tty, filp, info);
+ retval = tty_port_block_til_ready(port, tty, filp);
if (retval) {
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
#endif
- module_put(info->owner);
return retval;
}
#ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1639,6 +1542,7 @@ static void
isdn_tty_close(struct tty_struct *tty, struct file *filp)
{
modem_info *info = (modem_info *) tty->driver_data;
+ struct tty_port *port = &info->port;
ulong timeout;
if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
@@ -1649,7 +1553,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
#endif
return;
}
- if ((tty->count == 1) && (info->count != 1)) {
+ if ((tty->count == 1) && (port->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
@@ -1658,30 +1562,21 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
* serial port won't be shutdown.
*/
printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
+ "info->count is %d\n", port->count);
+ port->count = 1;
}
- if (--info->count < 0) {
+ if (--port->count < 0) {
printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
- info->line, info->count);
- info->count = 0;
+ info->line, port->count);
+ port->count = 0;
}
- if (info->count) {
+ if (port->count) {
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
#endif
- module_put(info->owner);
return;
}
- info->flags |= ISDN_ASYNC_CLOSING;
- /*
- * Save the termios structure, since this port may have
- * separate termios for callout and dialin.
- */
- if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
- if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
- info->callout_termios = *tty->termios;
+ port->flags |= ASYNC_CLOSING;
tty->closing = 1;
/*
@@ -1690,7 +1585,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
- if (info->flags & ISDN_ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
tty_wait_until_sent_from_close(tty, 3000); /* 30 seconds timeout */
/*
* Before we drop DTR, make sure the UART transmitter
@@ -1708,16 +1603,10 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
isdn_tty_shutdown(info);
isdn_tty_flush_buffer(tty);
tty_ldisc_flush(tty);
- info->tty = NULL;
+ port->tty = NULL;
info->ncarrier = 0;
- tty->closing = 0;
- module_put(info->owner);
- if (info->blocked_open) {
- msleep_interruptible(500);
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+
+ tty_port_close_end(port, tty);
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close normal exit\n");
#endif
@@ -1730,14 +1619,15 @@ static void
isdn_tty_hangup(struct tty_struct *tty)
{
modem_info *info = (modem_info *) tty->driver_data;
+ struct tty_port *port = &info->port;
if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
return;
isdn_tty_shutdown(info);
- info->count = 0;
- info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ port->count = 0;
+ port->flags &= ~ASYNC_NORMAL_ACTIVE;
+ port->tty = NULL;
+ wake_up_interruptible(&port->open_wait);
}
/* This routine initializes all emulator-data.
@@ -1864,6 +1754,16 @@ static const struct tty_operations modem_ops = {
.tiocmset = isdn_tty_tiocmset,
};
+static int isdn_tty_carrier_raised(struct tty_port *port)
+{
+ modem_info *info = container_of(port, modem_info, port);
+ return info->msr & UART_MSR_DCD;
+}
+
+static const struct tty_port_operations isdn_tty_port_ops = {
+ .carrier_raised = isdn_tty_carrier_raised,
+};
+
int
isdn_tty_modem_init(void)
{
@@ -1899,9 +1799,8 @@ isdn_tty_modem_init(void)
goto err_unregister;
}
#endif
-#ifdef MODULE
- info->owner = THIS_MODULE;
-#endif
+ tty_port_init(&info->port);
+ info->port.ops = &isdn_tty_port_ops;
spin_lock_init(&info->readlock);
sprintf(info->last_cause, "0000");
sprintf(info->last_num, "none");
@@ -1913,12 +1812,7 @@ isdn_tty_modem_init(void)
isdn_tty_modem_reset_regs(info, 1);
info->magic = ISDN_ASYNC_MAGIC;
info->line = i;
- info->tty = NULL;
info->x_char = 0;
- info->count = 0;
- info->blocked_open = 0;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
info->isdn_driver = -1;
info->isdn_channel = -1;
info->drv_index = -1;
@@ -1930,13 +1824,15 @@ isdn_tty_modem_init(void)
#ifdef CONFIG_ISDN_AUDIO
skb_queue_head_init(&info->dtmf_queue);
#endif
- if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) {
+ info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
+ GFP_KERNEL);
+ if (!info->port.xmit_buf) {
printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
retval = -ENOMEM;
goto err_unregister;
}
/* Make room for T.70 header */
- info->xmit_buf += 4;
+ info->port.xmit_buf += 4;
}
return 0;
err_unregister:
@@ -1945,7 +1841,7 @@ err_unregister:
#ifdef CONFIG_ISDN_TTY_FAX
kfree(info->fax);
#endif
- kfree(info->xmit_buf - 4);
+ kfree(info->port.xmit_buf - 4);
}
tty_unregister_driver(m->tty_modem);
err:
@@ -1966,7 +1862,7 @@ isdn_tty_exit(void)
#ifdef CONFIG_ISDN_TTY_FAX
kfree(info->fax);
#endif
- kfree(info->xmit_buf - 4);
+ kfree(info->port.xmit_buf - 4);
}
tty_unregister_driver(dev->mdm.tty_modem);
put_tty_driver(dev->mdm.tty_modem);
@@ -2068,7 +1964,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
- if (info->count == 0)
+ if (info->port.count == 0)
continue;
if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */
(info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */
@@ -2076,12 +1972,12 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
#ifdef ISDN_DEBUG_MODEM_ICALL
printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
- info->flags, info->isdn_driver, info->isdn_channel,
- dev->usage[idx]);
+ info->port.flags, info->isdn_driver,
+ info->isdn_channel, dev->usage[idx]);
#endif
if (
#ifndef FIX_FILE_TRANSFER
- (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
+ (info->port.flags & ASYNC_NORMAL_ACTIVE) &&
#endif
(info->isdn_driver == -1) &&
(info->isdn_channel == -1) &&
@@ -2120,8 +2016,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
return (wret == 2) ? 3 : 0;
}
-#define TTY_IS_ACTIVE(info) \
- (info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
+#define TTY_IS_ACTIVE(info) (info->port.flags & ASYNC_NORMAL_ACTIVE)
int
isdn_tty_stat_callback(int i, isdn_ctrl *c)
@@ -2212,9 +2107,9 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
* for incoming call of this device when
* DCD follow the state of incoming carrier
*/
- if (info->blocked_open &&
+ if (info->port.blocked_open &&
(info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->port.open_wait);
}
/* Schedule CONNECT-Message to any tty
@@ -2222,7 +2117,8 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
* set DCD-bit of its modem-status.
*/
if (TTY_IS_ACTIVE(info) ||
- (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
+ (info->port.blocked_open &&
+ (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
info->msr |= UART_MSR_DCD;
info->emu.charge = 0;
if (info->dialing & 0xf)
@@ -2339,8 +2235,8 @@ isdn_tty_at_cout(char *msg, modem_info *info)
l = strlen(msg);
spin_lock_irqsave(&info->readlock, flags);
- tty = info->tty;
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
+ tty = info->port.tty;
+ if ((info->port.flags & ASYNC_CLOSING) || (!tty)) {
spin_unlock_irqrestore(&info->readlock, flags);
return;
}
@@ -2490,15 +2386,15 @@ isdn_tty_modem_result(int code, modem_info *info)
case RESULT_NO_CARRIER:
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
- (info->flags & ISDN_ASYNC_CLOSING),
- (!info->tty));
+ (info->port.flags & ASYNC_CLOSING),
+ (!info->port.tty));
#endif
m->mdmreg[REG_RINGCNT] = 0;
del_timer(&info->nc_timer);
info->ncarrier = 0;
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+ if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
return;
- }
+
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 1) {
#ifdef ISDN_DEBUG_MODEM_VOICE
@@ -2629,14 +2525,11 @@ isdn_tty_modem_result(int code, modem_info *info)
}
}
if (code == RESULT_NO_CARRIER) {
- if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+ if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
return;
- }
- if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
- (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
- (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
- tty_hangup(info->tty);
- }
+
+ if (info->port.flags & ASYNC_CHECK_CD)
+ tty_hangup(info->port.tty);
}
}
@@ -3803,19 +3696,19 @@ isdn_tty_modem_escape(void)
int midx;
for (i = 0; i < ISDN_MAX_CHANNELS; i++)
- if (USG_MODEM(dev->usage[i]))
- if ((midx = dev->m_idx[i]) >= 0) {
- modem_info *info = &dev->mdm.info[midx];
- if (info->online) {
- ton = 1;
- if ((info->emu.pluscount == 3) &&
- time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) {
- info->emu.pluscount = 0;
- info->online = 0;
- isdn_tty_modem_result(RESULT_OK, info);
- }
+ if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
+ modem_info *info = &dev->mdm.info[midx];
+ if (info->online) {
+ ton = 1;
+ if ((info->emu.pluscount == 3) &&
+ time_after(jiffies,
+ info->emu.lastplus + PLUSWAIT2)) {
+ info->emu.pluscount = 0;
+ info->online = 0;
+ isdn_tty_modem_result(RESULT_OK, info);
}
}
+ }
isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
}
@@ -3873,15 +3766,14 @@ isdn_tty_carrier_timeout(void)
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
- if (info->dialing) {
- if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
- info->dialing = 0;
- isdn_tty_modem_result(RESULT_NO_CARRIER, info);
- isdn_tty_modem_hup(info, 1);
- }
- else
- ton = 1;
- }
+ if (!info->dialing)
+ continue;
+ if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
+ info->dialing = 0;
+ isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+ isdn_tty_modem_hup(info, 1);
+ } else
+ ton = 1;
}
isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
}