diff options
Diffstat (limited to 'drivers/irqchip')
| -rw-r--r-- | drivers/irqchip/irq-gic.c | 151 |
1 files changed, 148 insertions, 3 deletions
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d0e948084ea..9031171c141 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -253,10 +253,9 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; + raw_spin_lock(&irq_controller_lock); mask = 0xff << shift; bit = gic_cpu_map[cpu] << shift; - - raw_spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; writel_relaxed(val | bit, reg); raw_spin_unlock(&irq_controller_lock); @@ -652,7 +651,9 @@ static void __init gic_pm_init(struct gic_chip_data *gic) void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { int cpu; - unsigned long map = 0; + unsigned long flags, map = 0; + + raw_spin_lock_irqsave(&irq_controller_lock, flags); /* Convert our logical CPU mask into a physical one. */ for_each_cpu(cpu, mask) @@ -666,7 +667,149 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) /* this always happens on GIC0 */ writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); + + raw_spin_unlock_irqrestore(&irq_controller_lock, flags); +} +#endif + +#ifdef CONFIG_BL_SWITCHER +/* + * gic_send_sgi - send a SGI directly to given CPU interface number + * + * cpu_id: the ID for the destination CPU interface + * irq: the IPI number to send a SGI for + */ +void gic_send_sgi(unsigned int cpu_id, unsigned int irq) +{ + BUG_ON(cpu_id >= NR_GIC_CPU_IF); + cpu_id = 1 << cpu_id; + /* this always happens on GIC0 */ + writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); +} + +/* + * gic_get_cpu_id - get the CPU interface ID for the specified CPU + * + * @cpu: the logical CPU number to get the GIC ID for. + * + * Return the CPU interface ID for the given logical CPU number, + * or -1 if the CPU number is too large or the interface ID is + * unknown (more than one bit set). + */ +int gic_get_cpu_id(unsigned int cpu) +{ + unsigned int cpu_bit; + + if (cpu >= NR_GIC_CPU_IF) + return -1; + cpu_bit = gic_cpu_map[cpu]; + if (cpu_bit & (cpu_bit - 1)) + return -1; + return __ffs(cpu_bit); } + +/* + * gic_migrate_target - migrate IRQs to another CPU interface + * + * @new_cpu_id: the CPU target ID to migrate IRQs to + * + * Migrate all peripheral interrupts with a target matching the current CPU + * to the interface corresponding to @new_cpu_id. The CPU interface mapping + * is also updated. Targets to other CPU interfaces are unchanged. + * This must be called with IRQs locally disabled. + */ +void gic_migrate_target(unsigned int new_cpu_id) +{ + unsigned int cur_cpu_id, gic_irqs, gic_nr = 0; + void __iomem *dist_base; + int i, ror_val, cpu = smp_processor_id(); + u32 val, cur_target_mask, active_mask; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + if (!dist_base) + return; + gic_irqs = gic_data[gic_nr].gic_irqs; + + cur_cpu_id = __ffs(gic_cpu_map[cpu]); + cur_target_mask = 0x01010101 << cur_cpu_id; + ror_val = (cur_cpu_id - new_cpu_id) & 31; + + raw_spin_lock(&irq_controller_lock); + + /* Update the target interface for this logical CPU */ + gic_cpu_map[cpu] = 1 << new_cpu_id; + + /* + * Find all the peripheral interrupts targetting the current + * CPU interface and migrate them to the new CPU interface. + * We skip DIST_TARGET 0 to 7 as they are read-only. + */ + for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) { + val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4); + active_mask = val & cur_target_mask; + if (active_mask) { + val &= ~active_mask; + val |= ror32(active_mask, ror_val); + writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4); + } + } + + raw_spin_unlock(&irq_controller_lock); + + /* + * Now let's migrate and clear any potential SGIs that might be + * pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET + * is a banked register, we can only forward the SGI using + * GIC_DIST_SOFTINT. The original SGI source is lost but Linux + * doesn't use that information anyway. + * + * For the same reason we do not adjust SGI source information + * for previously sent SGIs by us to other CPUs either. + */ + for (i = 0; i < 16; i += 4) { + int j; + val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i); + if (!val) + continue; + writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i); + for (j = i; j < i + 4; j++) { + if (val & 0xff) + writel_relaxed((1 << (new_cpu_id + 16)) | j, + dist_base + GIC_DIST_SOFTINT); + val >>= 8; + } + } +} + +/* + * gic_get_sgir_physaddr - get the physical address for the SGI register + * + * REturn the physical address of the SGI register to be used + * by some early assembly code when the kernel is not yet available. + */ +static unsigned long gic_dist_physaddr; + +unsigned long gic_get_sgir_physaddr(void) +{ + if (!gic_dist_physaddr) + return 0; + return gic_dist_physaddr + GIC_DIST_SOFTINT; +} + +void __init gic_init_physaddr(struct device_node *node) +{ + struct resource res; + if (of_address_to_resource(node, 0, &res) == 0) { + gic_dist_physaddr = res.start; + pr_info("GIC physical location is %#lx\n", gic_dist_physaddr); + } +} + +#else +#define gic_init_physaddr(node) do { } while (0) #endif static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, @@ -850,6 +993,8 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) percpu_offset = 0; gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node); + if (!gic_cnt) + gic_init_physaddr(node); if (parent) { irq = irq_of_parse_and_map(node, 0); |