diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/mouse/Kconfig | 16 | ||||
-rw-r--r-- | drivers/input/mouse/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/mouse/gpio_mouse.c | 196 |
3 files changed, 213 insertions, 0 deletions
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 50e06e8dd05..7bbea097cda 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -216,4 +216,20 @@ config MOUSE_HIL help Say Y here to support HIL pointers. +config MOUSE_GPIO + tristate "GPIO mouse" + depends on GENERIC_GPIO + select INPUT_POLLDEV + help + This driver simulates a mouse on GPIO lines of various CPUs (and some + other chips). + + Say Y here if your device has buttons or a simple joystick connected + directly to GPIO lines. Your board-specific setup logic must also + provide a platform device and platform data saying which GPIOs are + used. + + To compile this driver as a module, choose M here: the + module will be called gpio_mouse. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index aa4ba878533..9e6e3633082 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o +obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c new file mode 100644 index 00000000000..0936d6ba015 --- /dev/null +++ b/drivers/input/mouse/gpio_mouse.c @@ -0,0 +1,196 @@ +/* + * Driver for simulating a mouse on GPIO lines. + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input-polldev.h> +#include <linux/gpio_mouse.h> + +#include <asm/gpio.h> + +/* + * Timer function which is run every scan_ms ms when the device is opened. + * The dev input varaible is set to the the input_dev pointer. + */ +static void gpio_mouse_scan(struct input_polled_dev *dev) +{ + struct gpio_mouse_platform_data *gpio = dev->private; + struct input_dev *input = dev->input; + int x, y; + + if (gpio->bleft >= 0) + input_report_key(input, BTN_LEFT, + gpio_get_value(gpio->bleft) ^ gpio->polarity); + if (gpio->bmiddle >= 0) + input_report_key(input, BTN_MIDDLE, + gpio_get_value(gpio->bmiddle) ^ gpio->polarity); + if (gpio->bright >= 0) + input_report_key(input, BTN_RIGHT, + gpio_get_value(gpio->bright) ^ gpio->polarity); + + x = (gpio_get_value(gpio->right) ^ gpio->polarity) + - (gpio_get_value(gpio->left) ^ gpio->polarity); + y = (gpio_get_value(gpio->down) ^ gpio->polarity) + - (gpio_get_value(gpio->up) ^ gpio->polarity); + + input_report_rel(input, REL_X, x); + input_report_rel(input, REL_Y, y); + input_sync(input); +} + +static int __init gpio_mouse_probe(struct platform_device *pdev) +{ + struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; + struct input_polled_dev *input_poll; + struct input_dev *input; + int pin, i; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + error = -ENXIO; + goto out; + } + + if (pdata->scan_ms < 0) { + dev_err(&pdev->dev, "invalid scan time\n"); + error = -EINVAL; + goto out; + } + + for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) { + pin = pdata->pins[i]; + + if (pin < 0) { + + if (i <= GPIO_MOUSE_PIN_RIGHT) { + /* Mouse direction is required. */ + dev_err(&pdev->dev, + "missing GPIO for directions\n"); + error = -EINVAL; + goto out_free_gpios; + } + + if (i == GPIO_MOUSE_PIN_BLEFT) + dev_dbg(&pdev->dev, "no left button defined\n"); + + } else { + error = gpio_request(pin, "gpio_mouse"); + if (error) { + dev_err(&pdev->dev, "fail %d pin (%d idx)\n", + pin, i); + goto out_free_gpios; + } + + gpio_direction_input(pin); + } + } + + input_poll = input_allocate_polled_device(); + if (!input_poll) { + dev_err(&pdev->dev, "not enough memory for input device\n"); + error = -ENOMEM; + goto out_free_gpios; + } + + platform_set_drvdata(pdev, input_poll); + + /* set input-polldev handlers */ + input_poll->private = pdata; + input_poll->poll = gpio_mouse_scan; + input_poll->poll_interval = pdata->scan_ms; + + input = input_poll->input; + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_REL, REL_X); + input_set_capability(input, EV_REL, REL_Y); + if (pdata->bleft >= 0) + input_set_capability(input, EV_KEY, BTN_LEFT); + if (pdata->bmiddle >= 0) + input_set_capability(input, EV_KEY, BTN_MIDDLE); + if (pdata->bright >= 0) + input_set_capability(input, EV_KEY, BTN_RIGHT); + + error = input_register_polled_device(input_poll); + if (error) { + dev_err(&pdev->dev, "could not register input device\n"); + goto out_free_polldev; + } + + dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n", + pdata->scan_ms, + pdata->bleft < 0 ? "" : "left ", + pdata->bmiddle < 0 ? "" : "middle ", + pdata->bright < 0 ? "" : "right"); + + return 0; + + out_free_polldev: + input_free_polled_device(input_poll); + platform_set_drvdata(pdev, NULL); + + out_free_gpios: + while (--i >= 0) { + pin = pdata->pins[i]; + if (pin) + gpio_free(pin); + } + out: + return error; +} + +static int __devexit gpio_mouse_remove(struct platform_device *pdev) +{ + struct input_polled_dev *input = platform_get_drvdata(pdev); + struct gpio_mouse_platform_data *pdata = input->private; + int pin, i; + + input_unregister_polled_device(input); + input_free_polled_device(input); + + for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) { + pin = pdata->pins[i]; + if (pin >= 0) + gpio_free(pin); + } + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +struct platform_driver gpio_mouse_device_driver = { + .remove = __devexit_p(gpio_mouse_remove), + .driver = { + .name = "gpio_mouse", + } +}; + +static int __init gpio_mouse_init(void) +{ + return platform_driver_probe(&gpio_mouse_device_driver, + gpio_mouse_probe); +} +module_init(gpio_mouse_init); + +static void __exit gpio_mouse_exit(void) +{ + platform_driver_unregister(&gpio_mouse_device_driver); +} +module_exit(gpio_mouse_exit); + +MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +MODULE_DESCRIPTION("GPIO mouse driver"); +MODULE_LICENSE("GPL"); |