diff options
Diffstat (limited to 'drivers/input/touchscreen')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 32 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 3 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 6 | ||||
| -rw-r--r-- | drivers/input/touchscreen/da9034-ts.c | 390 | ||||
| -rw-r--r-- | drivers/input/touchscreen/tsc2007.c | 381 | ||||
| -rw-r--r-- | drivers/input/touchscreen/usbtouchscreen.c | 5 | ||||
| -rw-r--r-- | drivers/input/touchscreen/wacom_w8001.c | 325 |
7 files changed, 1136 insertions, 6 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3d1ab8fa9ac..bb6486a8c07 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -58,6 +58,14 @@ config TOUCHSCREEN_CORGI NOTE: this driver is deprecated, try enable SPI and generic ADS7846-based touchscreen driver. +config TOUCHSCREEN_DA9034 + tristate "Touchscreen support for Dialog Semiconductor DA9034" + depends on PMIC_DA903X + default y + help + Say Y here to enable the support for the touchscreen found + on Dialog Semiconductor DA9034 PMIC. + config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO @@ -95,6 +103,19 @@ config TOUCHSCREEN_ELO To compile this driver as a module, choose M here: the module will be called elo. +config TOUCHSCREEN_WACOM_W8001 + tristate "Wacom W8001 penabled serial touchscreen" + select SERIO + help + Say Y here if you have an Wacom W8001 penabled serial touchscreen + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called wacom_w8001. + + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO @@ -376,4 +397,15 @@ config TOUCHSCREEN_TOUCHIT213 To compile this driver as a module, choose M here: the module will be called touchit213. +config TOUCHSCREEN_TSC2007 + tristate "TSC2007 based touchscreens" + depends on I2C + help + Say Y here if you have a TSC2007 based touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tsc2007. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 15cf2907948..d3375aff46f 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -25,8 +25,11 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o +obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o +obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o +obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index e1ece89fe92..7c27c8b9b6d 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -472,7 +472,7 @@ static ssize_t ads7846_disable_store(struct device *dev, const char *buf, size_t count) { struct ads7846 *ts = dev_get_drvdata(dev); - long i; + unsigned long i; if (strict_strtoul(buf, 10, &i)) return -EINVAL; @@ -559,7 +559,7 @@ static void ads7846_rx(void *ads) if (packet->tc.ignore || Rt > ts->pressure_max) { #ifdef VERBOSE pr_debug("%s: ignored %d pressure %d\n", - ts->spi->dev.bus_id, packet->tc.ignore, Rt); + dev_name(&ts->spi->dev), packet->tc.ignore, Rt); #endif hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_MODE_REL); @@ -947,7 +947,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->penirq_recheck_delay_usecs = pdata->penirq_recheck_delay_usecs; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); input_dev->name = "ADS784x Touchscreen"; input_dev->phys = ts->phys; diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c new file mode 100644 index 00000000000..fa67d782c3c --- /dev/null +++ b/drivers/input/touchscreen/da9034-ts.c @@ -0,0 +1,390 @@ +/* + * Touchscreen driver for Dialog Semiconductor DA9034 + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Fengwei Yin <fengwei.yin@marvell.com> + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/workqueue.h> +#include <linux/mfd/da903x.h> + +#define DA9034_MANUAL_CTRL 0x50 +#define DA9034_LDO_ADC_EN (1 << 4) + +#define DA9034_AUTO_CTRL1 0x51 + +#define DA9034_AUTO_CTRL2 0x52 +#define DA9034_AUTO_TSI_EN (1 << 3) +#define DA9034_PEN_DETECT (1 << 4) + +#define DA9034_TSI_CTRL1 0x53 +#define DA9034_TSI_CTRL2 0x54 +#define DA9034_TSI_X_MSB 0x6c +#define DA9034_TSI_Y_MSB 0x6d +#define DA9034_TSI_XY_LSB 0x6e + +enum { + STATE_IDLE, /* wait for pendown */ + STATE_BUSY, /* TSI busy sampling */ + STATE_STOP, /* sample available */ + STATE_WAIT, /* Wait to start next sample */ +}; + +enum { + EVENT_PEN_DOWN, + EVENT_PEN_UP, + EVENT_TSI_READY, + EVENT_TIMEDOUT, +}; + +struct da9034_touch { + struct device *da9034_dev; + struct input_dev *input_dev; + + struct delayed_work tsi_work; + struct notifier_block notifier; + + int state; + + int interval_ms; + int x_inverted; + int y_inverted; + + int last_x; + int last_y; +}; + +static inline int is_pen_down(struct da9034_touch *touch) +{ + return da903x_query_status(touch->da9034_dev, DA9034_STATUS_PEN_DOWN); +} + +static inline int detect_pen_down(struct da9034_touch *touch, int on) +{ + if (on) + return da903x_set_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_PEN_DETECT); + else + return da903x_clr_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_PEN_DETECT); +} + +static int read_tsi(struct da9034_touch *touch) +{ + uint8_t _x, _y, _v; + int ret; + + ret = da903x_read(touch->da9034_dev, DA9034_TSI_X_MSB, &_x); + if (ret) + return ret; + + ret = da903x_read(touch->da9034_dev, DA9034_TSI_Y_MSB, &_y); + if (ret) + return ret; + + ret = da903x_read(touch->da9034_dev, DA9034_TSI_XY_LSB, &_v); + if (ret) + return ret; + + touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3); + touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2); + + return 0; +} + +static inline int start_tsi(struct da9034_touch *touch) +{ + return da903x_set_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN); +} + +static inline int stop_tsi(struct da9034_touch *touch) +{ + return da903x_clr_bits(touch->da9034_dev, + DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN); +} + +static inline void report_pen_down(struct da9034_touch *touch) +{ + int x = touch->last_x; + int y = touch->last_y; + + x &= 0xfff; + if (touch->x_inverted) + x = 1024 - x; + y &= 0xfff; + if (touch->y_inverted) + y = 1024 - y; + + input_report_abs(touch->input_dev, ABS_X, x); + input_report_abs(touch->input_dev, ABS_Y, y); + input_report_key(touch->input_dev, BTN_TOUCH, 1); + + input_sync(touch->input_dev); +} + +static inline void report_pen_up(struct da9034_touch *touch) +{ + input_report_key(touch->input_dev, BTN_TOUCH, 0); + input_sync(touch->input_dev); +} + +static void da9034_event_handler(struct da9034_touch *touch, int event) +{ + int err; + + switch (touch->state) { + case STATE_IDLE: + if (event != EVENT_PEN_DOWN) + break; + + /* Enable auto measurement of the TSI, this will + * automatically disable pen down detection + */ + err = start_tsi(touch); + if (err) + goto err_reset; + + touch->state = STATE_BUSY; + break; + + case STATE_BUSY: + if (event != EVENT_TSI_READY) + break; + + err = read_tsi(touch); + if (err) + goto err_reset; + + /* Disable auto measurement of the TSI, so that + * pen down status will be available + */ + err = stop_tsi(touch); + if (err) + goto err_reset; + + touch->state = STATE_STOP; + break; + + case STATE_STOP: + if (event == EVENT_PEN_DOWN) { + report_pen_down(touch); + schedule_delayed_work(&touch->tsi_work, + msecs_to_jiffies(touch->interval_ms)); + touch->state = STATE_WAIT; + } + + if (event == EVENT_PEN_UP) { + report_pen_up(touch); + touch->state = STATE_IDLE; + } + + input_sync(touch->input_dev); + break; + + case STATE_WAIT: + if (event != EVENT_TIMEDOUT) + break; + + if (is_pen_down(touch)) { + start_tsi(touch); + touch->state = STATE_BUSY; + } else + touch->state = STATE_IDLE; + break; + } + return; + +err_reset: + touch->state = STATE_IDLE; + stop_tsi(touch); + detect_pen_down(touch, 1); +} + +static void da9034_tsi_work(struct work_struct *work) +{ + struct da9034_touch *touch = + container_of(work, struct da9034_touch, tsi_work.work); + + da9034_event_handler(touch, EVENT_TIMEDOUT); +} + +static int da9034_touch_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct da9034_touch *touch = + container_of(nb, struct da9034_touch, notifier); + + if (event & DA9034_EVENT_PEN_DOWN) { + if (is_pen_down(touch)) + da9034_event_handler(touch, EVENT_PEN_DOWN); + else + da9034_event_handler(touch, EVENT_PEN_UP); + } + + if (event & DA9034_EVENT_TSI_READY) + da9034_event_handler(touch, EVENT_TSI_READY); + + return 0; +} + +static int da9034_touch_open(struct input_dev *dev) +{ + struct da9034_touch *touch = input_get_drvdata(dev); + int ret; + + ret = da903x_register_notifier(touch->da9034_dev, &touch->notifier, + DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY); + if (ret) + return -EBUSY; + + /* Enable ADC LDO */ + ret = da903x_set_bits(touch->da9034_dev, + DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN); + if (ret) + return ret; + + /* TSI_DELAY: 3 slots, TSI_SKIP: 3 slots */ + ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL1, 0x1b); + if (ret) + return ret; + + ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL2, 0x00); + if (ret) + return ret; + + touch->state = STATE_IDLE; + detect_pen_down(touch, 1); + + return 0; +} + +static void da9034_touch_close(struct input_dev *dev) +{ + struct da9034_touch *touch = input_get_drvdata(dev); + + da903x_unregister_notifier(touch->da9034_dev, &touch->notifier, + DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY); + + cancel_delayed_work_sync(&touch->tsi_work); + + touch->state = STATE_IDLE; + stop_tsi(touch); + detect_pen_down(touch, 0); + + /* Disable ADC LDO */ + da903x_clr_bits(touch->da9034_dev, + DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN); +} + + +static int __devinit da9034_touch_probe(struct platform_device *pdev) +{ + struct da9034_touch_pdata *pdata = pdev->dev.platform_data; + struct da9034_touch *touch; + struct input_dev *input_dev; + int ret; + + touch = kzalloc(sizeof(struct da9034_touch), GFP_KERNEL); + if (touch == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + touch->da9034_dev = pdev->dev.parent; + + if (pdata) { + touch->interval_ms = pdata->interval_ms; + touch->x_inverted = pdata->x_inverted; + touch->y_inverted = pdata->y_inverted; + } else + /* fallback into default */ + touch->interval_ms = 10; + + INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work); + touch->notifier.notifier_call = da9034_touch_notifier; + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + ret = -ENOMEM; + goto err_free_touch; + } + + input_dev->name = pdev->name; + input_dev->open = da9034_touch_open; + input_dev->close = da9034_touch_close; + input_dev->dev.parent = &pdev->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + touch->input_dev = input_dev; + input_set_drvdata(input_dev, touch); + + ret = input_register_device(input_dev); + if (ret) + goto err_free_input; + + platform_set_drvdata(pdev, touch); + return 0; + +err_free_input: + input_free_device(input_dev); +err_free_touch: + kfree(touch); + return ret; +} + +static int __devexit da9034_touch_remove(struct platform_device *pdev) +{ + struct da9034_touch *touch = platform_get_drvdata(pdev); + + input_unregister_device(touch->input_dev); + kfree(touch); + + return 0; +} + +static struct platform_driver da9034_touch_driver = { + .driver = { + .name = "da9034-touch", + .owner = THIS_MODULE, + }, + .probe = da9034_touch_probe, + .remove = __devexit_p(da9034_touch_remove), +}; + +static int __init da9034_touch_init(void) +{ + return platform_driver_register(&da9034_touch_driver); +} +module_init(da9034_touch_init); + +static void __exit da9034_touch_exit(void) +{ + platform_driver_unregister(&da9034_touch_driver); +} +module_exit(da9034_touch_exit); + +MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9034-touch"); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c new file mode 100644 index 00000000000..b75dc299057 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.c @@ -0,0 +1,381 @@ +/* + * drivers/input/touchscreen/tsc2007.c + * + * Copyright (c) 2008 MtekVision Co., Ltd. + * Kwangwoo Lee <kwlee@mtekvision.com> + * + * Using code from: + * - ads7846.c + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/hrtimer.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> + +#define TS_POLL_DELAY (10 * 1000) /* ns delay before the first sample */ +#define TS_POLL_PERIOD (5 * 1000) /* ns delay between samples */ + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { + u16 x; + u16 y; + u16 z1, z2; +}; + +struct tsc2007 { + struct input_dev *input; + char phys[32]; + struct hrtimer timer; + struct ts_event tc; + + struct i2c_client *client; + + spinlock_t lock; + + u16 model; + u16 x_plate_ohms; + + unsigned pendown; + int irq; + + int (*get_pendown_state)(void); + void (*clear_penirq)(void); +}; + +static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +{ + s32 data; + u16 val; + + data = i2c_smbus_read_word_data(tsc->client, cmd); + if (data < 0) { + dev_err(&tsc->client->dev, "i2c io error: %d\n", data); + return data; + } + + /* The protocol and raw data format from i2c interface: + * S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P + * Where DataLow has [D11-D4], DataHigh has [D3-D0 << 4 | Dummy 4bit]. + */ + val = swab16(data) >> 4; + + dev_dbg(&tsc->client->dev, "data: 0x%x, val: 0x%x\n", data, val); + + return val; +} + +static void tsc2007_send_event(void *tsc) +{ + struct tsc2007 *ts = tsc; + u32 rt; + u16 x, y, z1, z2; + + x = ts->tc.x; + y = ts->tc.y; + z1 = ts->tc.z1; + z2 = ts->tc.z2; + + /* range filtering */ + if (x == MAX_12BIT) + x = 0; + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + rt = z2; + rt -= z1; + rt *= x; + rt *= ts->x_plate_ohms; + rt /= z1; + rt = (rt + 2047) >> 12; + } else + rt = 0; + + /* Sample found inconsistent by debouncing or pressure is beyond + * the maximum. Don't report it to user space, repeat at least + * once more the measurement + */ + if (rt > MAX_12BIT) { + dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); + + hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), + HRTIMER_MODE_REL); + return; + } + + /* NOTE: We can't rely on the pressure to determine the pen down + * state, even this controller has a pressure sensor. The pressure + * value can fluctuate for quite a while after lifting the pen and + * in some cases may not even settle at the expected value. + * + * The only safe way to check for the pen up condition is in the + * timer by reading the pen signal state (it's a GPIO _and_ IRQ). + */ + if (rt) { + struct input_dev *input = ts->input; + + if (!ts->pendown) { + dev_dbg(&ts->client->dev, "DOWN\n"); + + input_report_key(input, BTN_TOUCH, 1); + ts->pendown = 1; + } + + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_PRESSURE, rt); + + input_sync(input); + + dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n", + x, y, rt); + } + + hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), + HRTIMER_MODE_REL); +} + +static int tsc2007_read_values(struct tsc2007 *tsc) +{ + /* y- still on; turn on only y+ (and ADC) */ + tsc->tc.y = tsc2007_xfer(tsc, READ_Y); + + /* turn y- off, x+ on, then leave in lowpower */ + tsc->tc.x = tsc2007_xfer(tsc, READ_X); + + /* turn y+ off, x- on; we'll use formula #1 */ + tsc->tc.z1 = tsc2007_xfer(tsc, READ_Z1); + tsc->tc.z2 = tsc2007_xfer(tsc, READ_Z2); + + /* power down */ + tsc2007_xfer(tsc, PWRDOWN); + + return 0; +} + +static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) +{ + struct tsc2007 *ts = container_of(handle, struct tsc2007, timer); + + spin_lock_irq(&ts->lock); + + if (unlikely(!ts->get_pendown_state() && ts->pendown)) { + struct input_dev *input = ts->input; + + dev_dbg(&ts->client->dev, "UP\n"); + + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); + + ts->pendown = 0; + enable_irq(ts->irq); + } else { + /* pen is still down, continue with the measurement */ + dev_dbg(&ts->client->dev, "pen is still down\n"); + + tsc2007_read_values(ts); + tsc2007_send_event(ts); + } + + spin_unlock_irq(&ts->lock); + + return HRTIMER_NORESTART; +} + +static irqreturn_t tsc2007_irq(int irq, void *handle) +{ + struct tsc2007 *ts = handle; + unsigned long flags; + + spin_lock_irqsave(&ts->lock, flags); + + if (likely(ts->get_pendown_state())) { + disable_irq(ts->irq); + hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), + HRTIMER_MODE_REL); + } + + if (ts->clear_penirq) + ts->clear_penirq(); + + spin_unlock_irqrestore(&ts->lock, flags); + + return IRQ_HANDLED; +} + +static int tsc2007_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tsc2007 *ts; + struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data; + struct input_dev *input_dev; + int err; + + if (!pdata) { + dev_err(&client->dev, "platform data is required!\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -EIO; + + ts = kzalloc(sizeof(struct tsc2007), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + ts->client = client; + i2c_set_clientdata(client, ts); + + ts->input = input_dev; + + hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + ts->timer.function = tsc2007_timer; + + spin_lock_init(&ts->lock); + + ts->model = pdata->model; + ts->x_plate_ohms = pdata->x_plate_ohms; + ts->get_pendown_state = pdata->get_pendown_state; + ts->clear_penirq = pdata->clear_penirq; + + pdata->init_platform_hw(); + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id); + + input_dev->name = "TSC2007 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + + tsc2007_read_values(ts); + + ts->irq = client->irq; + + err = request_irq(ts->irq, tsc2007_irq, 0, + client->dev.driver->name, ts); + if (err < 0) { + dev_err(&client->dev, "irq %d busy?\n", ts->irq); + goto err_free_mem; + } + + err = input_register_device(input_dev); + if (err) + goto err_free_irq; + + dev_info(&client->dev, "registered with irq (%d)\n", ts->irq); + + return 0; + + err_free_irq: + free_irq(ts->irq, ts); + hrtimer_cancel(&ts->timer); + err_free_mem: + input_free_device(input_dev); + kfree(ts); + return err; +} + +static int tsc2007_remove(struct i2c_client *client) +{ + struct tsc2007 *ts = i2c_get_clientdata(client); + struct tsc2007_platform_data *pdata; + + pdata = client->dev.platform_data; + pdata->exit_platform_hw(); + + free_irq(ts->irq, ts); + hrtimer_cancel(&ts->timer); + input_unregister_device(ts->input); + kfree(ts); + + return 0; +} + +static struct i2c_device_id tsc2007_idtable[] = { + { "tsc2007", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, tsc2007_idtable); + +static struct i2c_driver tsc2007_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tsc2007" + }, + .id_table = tsc2007_idtable, + .probe = tsc2007_probe, + .remove = tsc2007_remove, +}; + +static int __init tsc2007_init(void) +{ + return i2c_add_driver(&tsc2007_driver); +} + +static void __exit tsc2007_exit(void) +{ + i2c_del_driver(&tsc2007_driver); +} + +module_init(tsc2007_init); +module_exit(tsc2007_exit); + +MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>"); +MODULE_DESCRIPTION("TSC2007 TouchScreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index fdd645c214a..5080b26ba16 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -424,7 +424,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); if (ret < 0) goto err_out; - if (buf[0] != 0x06 || buf[1] != 0x00) { + if (buf[0] != 0x06) { ret = -ENODEV; goto err_out; } @@ -437,8 +437,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); if (ret < 0) goto err_out; - if ((buf[0] != 0x06 || buf[1] != 0x00) && - (buf[0] != 0x15 || buf[1] != 0x01)) { + if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) { ret = -ENODEV; goto err_out; } diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c new file mode 100644 index 00000000000..2f33a016764 --- /dev/null +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -0,0 +1,325 @@ +/* + * Wacom W8001 penabled serial touchscreen driver + * + * Copyright (c) 2008 Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout based on Elo serial touchscreen driver by Vojtech Pavlik + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> +#include <linux/ctype.h> + +#define DRIVER_DESC "Wacom W8001 serial touchscreen driver" + +MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define W8001_MAX_LENGTH 11 +#define W8001_PACKET_LEN 11 +#define W8001_LEAD_MASK 0x80 +#define W8001_LEAD_BYTE 0x80 +#define W8001_TAB_MASK 0x40 +#define W8001_TAB_BYTE 0x40 + +#define W8001_QUERY_PACKET 0x20 + +struct w8001_coord { + u8 rdy; + u8 tsw; + u8 f1; + u8 f2; + u16 x; + u16 y; + u16 pen_pressure; + u8 tilt_x; + u8 tilt_y; +}; + +/* + * Per-touchscreen data. + */ + +struct w8001 { + struct input_dev *dev; + struct serio *serio; + struct mutex cmd_mutex; + struct completion cmd_done; + int id; + int idx; + unsigned char expected_packet; + unsigned char data[W8001_MAX_LENGTH]; + unsigned char response[W8001_PACKET_LEN]; + char phys[32]; +}; + +static int parse_data(u8 *data, struct w8001_coord *coord) +{ + coord->rdy = data[0] & 0x20; + coord->tsw = data[0] & 0x01; + coord->f1 = data[0] & 0x02; + coord->f2 = data[0] & 0x04; + + coord->x = (data[1] & 0x7F) << 9; + coord->x |= (data[2] & 0x7F) << 2; + coord->x |= (data[6] & 0x60) >> 5; + + coord->y = (data[3] & 0x7F) << 9; + coord->y |= (data[4] & 0x7F) << 2; + coord->y |= (data[6] & 0x18) >> 3; + + coord->pen_pressure = data[5] & 0x7F; + coord->pen_pressure |= (data[6] & 0x07) << 7 ; + + coord->tilt_x = data[7] & 0x7F; + coord->tilt_y = data[8] & 0x7F; + + return 0; +} + +static void w8001_process_data(struct w8001 *w8001, unsigned char data) +{ + struct input_dev *dev = w8001->dev; + u8 tmp; + struct w8001_coord coord; + + w8001->data[w8001->idx] = data; + switch (w8001->idx++) { + case 0: + if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) { + pr_debug("w8001: unsynchronized data: 0x%02x\n", data); + w8001->idx = 0; + } + break; + case 8: + tmp = w8001->data[0] & W8001_TAB_MASK; + if (unlikely(tmp == W8001_TAB_BYTE)) + break; + w8001->idx = 0; + memset(&coord, 0, sizeof(coord)); + parse_data(w8001->data, &coord); + input_report_abs(dev, ABS_X, coord.x); + input_report_abs(dev, ABS_Y, coord.y); + input_report_abs(dev, ABS_PRESSURE, coord.pen_pressure); + input_report_key(dev, BTN_TOUCH, coord.tsw); + input_sync(dev); + break; + case 10: + w8001->idx = 0; + memcpy(w8001->response, &w8001->data, W8001_PACKET_LEN); + w8001->expected_packet = W8001_QUERY_PACKET; + complete(&w8001->cmd_done); + break; + } +} + + +static irqreturn_t w8001_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct w8001 *w8001 = serio_get_drvdata(serio); + + w8001_process_data(w8001, data); + + return IRQ_HANDLED; +} + +static int w8001_async_command(struct w8001 *w8001, unsigned char *packet, + int len) +{ + int rc = -1; + int i; + + mutex_lock(&w8001->cmd_mutex); + + for (i = 0; i < len; i++) { + if (serio_write(w8001->serio, packet[i])) + goto out; + } + rc = 0; + +out: + mutex_unlock(&w8001->cmd_mutex); + return rc; +} + +static int w8001_command(struct w8001 *w8001, unsigned char *packet, int len) +{ + int rc = -1; + int i; + + mutex_lock(&w8001->cmd_mutex); + + serio_pause_rx(w8001->serio); + init_completion(&w8001->cmd_done); + serio_continue_rx(w8001->serio); + + for (i = 0; i < len; i++) { + if (serio_write(w8001->serio, packet[i])) + goto out; + } + + wait_for_completion_timeout(&w8001->cmd_done, HZ); + + if (w8001->expected_packet == W8001_QUERY_PACKET) { + /* We are back in reporting mode, the query was ACKed */ + memcpy(packet, w8001->response, W8001_PACKET_LEN); + rc = 0; + } + +out: + mutex_unlock(&w8001->cmd_mutex); + return rc; +} + +static int w8001_setup(struct w8001 *w8001) +{ + struct w8001_coord coord; + struct input_dev *dev = w8001->dev; + unsigned char start[1] = { '1' }; + unsigned char query[11] = { '*' }; + + if (w8001_command(w8001, query, 1)) + return -1; + + memset(&coord, 0, sizeof(coord)); + parse_data(query, &coord); + + input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); + input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); + input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); + input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); + + if (w8001_async_command(w8001, start, 1)) + return -1; + + return 0; +} + +/* + * w8001_disconnect() is the opposite of w8001_connect() + */ + +static void w8001_disconnect(struct serio *serio) +{ + struct w8001 *w8001 = serio_get_drvdata(serio); + + input_get_device(w8001->dev); + input_unregister_device(w8001->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(w8001->dev); + kfree(w8001); +} + +/* + * w8001_connect() is the routine that is called when someone adds a + * new serio device that supports the w8001 protocol and registers it as + * an input device. + */ + +static int w8001_connect(struct serio *serio, struct serio_driver *drv) +{ + struct w8001 *w8001; + struct input_dev *input_dev; + int err; + + w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!w8001 || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + w8001->serio = serio; + w8001->id = serio->id.id; + w8001->dev = input_dev; + mutex_init(&w8001->cmd_mutex); + init_completion(&w8001->cmd_done); + snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys); + + input_dev->name = "Wacom W8001 Penabled Serial TouchScreen"; + input_dev->phys = w8001->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_W8001; + input_dev->id.product = w8001->id; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + serio_set_drvdata(serio, w8001); + err = serio_open(serio, drv); + if (err) + goto fail2; + + if (w8001_setup(w8001)) + goto fail3; + + err = input_register_device(w8001->dev); + if (err) + goto fail3; + + return 0; + +fail3: + serio_close(serio); +fail2: + serio_set_drvdata(serio, NULL); +fail1: + input_free_device(input_dev); + kfree(w8001); + return err; +} + +static struct serio_device_id w8001_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_W8001, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, w8001_serio_ids); + +static struct serio_driver w8001_drv = { + .driver = { + .name = "w8001", + }, + .description = DRIVER_DESC, + .id_table = w8001_serio_ids, + .interrupt = w8001_interrupt, + .connect = w8001_connect, + .disconnect = w8001_disconnect, +}; + +static int __init w8001_init(void) +{ + return serio_register_driver(&w8001_drv); +} + +static void __exit w8001_exit(void) +{ + serio_unregister_driver(&w8001_drv); +} + +module_init(w8001_init); +module_exit(w8001_exit); |