aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/misc')
-rw-r--r--drivers/input/misc/Kconfig13
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/ati_remote.c20
-rw-r--r--drivers/input/misc/ati_remote2.c263
-rw-r--r--drivers/input/misc/cm109.c882
-rw-r--r--drivers/input/misc/hp_sdc_rtc.c10
-rw-r--r--drivers/input/misc/map_to_7segment.h189
-rw-r--r--drivers/input/misc/sparcspkr.c4
-rw-r--r--drivers/input/misc/wistron_btns.c19
-rw-r--r--drivers/input/misc/yealink.c5
10 files changed, 1164 insertions, 242 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index e99b7882f38..199055db508 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -180,6 +180,19 @@ config INPUT_YEALINK
To compile this driver as a module, choose M here: the module will be
called yealink.
+config INPUT_CM109
+ tristate "C-Media CM109 USB I/O Controller"
+ depends on EXPERIMENTAL
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to enable keyboard and buzzer functions of the
+ C-Media CM109 usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ To compile this driver as a module, choose M here: the module will be
+ called cm109.
+
config INPUT_UINPUT
tristate "User level driver support"
help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f48009b5222..d7db2aeb8a9 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index debfc1af9d9..e290fde35e7 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -285,7 +285,6 @@ static const struct {
};
/* Local function prototypes */
-static void ati_remote_dump (unsigned char *data, unsigned int actual_length);
static int ati_remote_open (struct input_dev *inputdev);
static void ati_remote_close (struct input_dev *inputdev);
static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
@@ -307,15 +306,16 @@ static struct usb_driver ati_remote_driver = {
/*
* ati_remote_dump_input
*/
-static void ati_remote_dump(unsigned char *data, unsigned int len)
+static void ati_remote_dump(struct device *dev, unsigned char *data,
+ unsigned int len)
{
if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
- warn("Weird byte 0x%02x", data[0]);
+ dev_warn(dev, "Weird byte 0x%02x\n", data[0]);
else if (len == 4)
- warn("Weird key %02x %02x %02x %02x",
+ dev_warn(dev, "Weird key %02x %02x %02x %02x\n",
data[0], data[1], data[2], data[3]);
else
- warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
+ dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
len, data[0], data[1], data[2], data[3], data[4], data[5]);
}
@@ -470,7 +470,7 @@ static void ati_remote_input_report(struct urb *urb)
/* Deal with strange looking inputs */
if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
((data[3] & 0x0f) != 0x00) ) {
- ati_remote_dump(data, urb->actual_length);
+ ati_remote_dump(&urb->dev->dev, data, urb->actual_length);
return;
}
@@ -814,7 +814,7 @@ static void ati_remote_disconnect(struct usb_interface *interface)
ati_remote = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (!ati_remote) {
- warn("%s - null device?\n", __func__);
+ dev_warn(&interface->dev, "%s - null device?\n", __func__);
return;
}
@@ -834,9 +834,11 @@ static int __init ati_remote_init(void)
result = usb_register(&ati_remote_driver);
if (result)
- err("usb_register error #%d\n", result);
+ printk(KERN_ERR KBUILD_MODNAME
+ ": usb_register error #%d\n", result);
else
- info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return result;
}
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index a7fabafbd94..3c9988dc0e9 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -1,8 +1,8 @@
/*
* ati_remote2 - ATI/Philips USB RF remote driver
*
- * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
- * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
+ * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
+ * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
@@ -12,7 +12,7 @@
#include <linux/usb/input.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
-#define DRIVER_VERSION "0.2"
+#define DRIVER_VERSION "0.3"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
@@ -27,7 +27,7 @@ MODULE_LICENSE("GPL");
* A remote's "channel" may be altered by pressing and holding the "PC" button for
* approximately 3 seconds, after which the button will slowly flash the count of the
* currently configured "channel", using the numeric keypad enter a number between 1 and
- * 16 and then the "PC" button again, the button will slowly flash the count of the
+ * 16 and then press the "PC" button again, the button will slowly flash the count of the
* newly configured "channel".
*/
@@ -45,9 +45,25 @@ static struct usb_device_id ati_remote2_id_table[] = {
};
MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
-static struct {
- int hw_code;
- int key_code;
+static DEFINE_MUTEX(ati_remote2_mutex);
+
+enum {
+ ATI_REMOTE2_OPENED = 0x1,
+ ATI_REMOTE2_SUSPENDED = 0x2,
+};
+
+enum {
+ ATI_REMOTE2_AUX1,
+ ATI_REMOTE2_AUX2,
+ ATI_REMOTE2_AUX3,
+ ATI_REMOTE2_AUX4,
+ ATI_REMOTE2_PC,
+ ATI_REMOTE2_MODES,
+};
+
+static const struct {
+ u8 hw_code;
+ u16 keycode;
} ati_remote2_key_table[] = {
{ 0x00, KEY_0 },
{ 0x01, KEY_1 },
@@ -73,6 +89,7 @@ static struct {
{ 0x37, KEY_RECORD },
{ 0x38, KEY_DVD },
{ 0x39, KEY_TV },
+ { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
{ 0x54, KEY_MENU },
{ 0x58, KEY_UP },
{ 0x59, KEY_DOWN },
@@ -91,15 +108,9 @@ static struct {
{ 0xa9, BTN_LEFT },
{ 0xaa, BTN_RIGHT },
{ 0xbe, KEY_QUESTION },
- { 0xd5, KEY_FRONT },
{ 0xd0, KEY_EDIT },
+ { 0xd5, KEY_FRONT },
{ 0xf9, KEY_INFO },
- { (0x00 << 8) | 0x3f, KEY_PROG1 },
- { (0x01 << 8) | 0x3f, KEY_PROG2 },
- { (0x02 << 8) | 0x3f, KEY_PROG3 },
- { (0x03 << 8) | 0x3f, KEY_PROG4 },
- { (0x04 << 8) | 0x3f, KEY_PC },
- { 0, KEY_RESERVED }
};
struct ati_remote2 {
@@ -117,46 +128,106 @@ struct ati_remote2 {
char name[64];
char phys[64];
+
+ /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
+ u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
+
+ unsigned int flags;
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
static void ati_remote2_disconnect(struct usb_interface *interface);
+static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
+static int ati_remote2_resume(struct usb_interface *interface);
static struct usb_driver ati_remote2_driver = {
.name = "ati_remote2",
.probe = ati_remote2_probe,
.disconnect = ati_remote2_disconnect,
.id_table = ati_remote2_id_table,
+ .suspend = ati_remote2_suspend,
+ .resume = ati_remote2_resume,
+ .supports_autosuspend = 1,
};
-static int ati_remote2_open(struct input_dev *idev)
+static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
{
- struct ati_remote2 *ar2 = input_get_drvdata(idev);
int r;
r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
if (r) {
dev_err(&ar2->intf[0]->dev,
- "%s: usb_submit_urb() = %d\n", __func__, r);
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
return r;
}
r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
if (r) {
usb_kill_urb(ar2->urb[0]);
dev_err(&ar2->intf[1]->dev,
- "%s: usb_submit_urb() = %d\n", __func__, r);
+ "%s(): usb_submit_urb() = %d\n", __func__, r);
return r;
}
return 0;
}
+static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
+{
+ usb_kill_urb(ar2->urb[1]);
+ usb_kill_urb(ar2->urb[0]);
+}
+
+static int ati_remote2_open(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int r;
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ r = usb_autopm_get_interface(ar2->intf[0]);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+ goto fail1;
+ }
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
+ r = ati_remote2_submit_urbs(ar2);
+ if (r)
+ goto fail2;
+ }
+
+ ar2->flags |= ATI_REMOTE2_OPENED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ usb_autopm_put_interface(ar2->intf[0]);
+
+ return 0;
+
+ fail2:
+ mutex_unlock(&ati_remote2_mutex);
+ usb_autopm_put_interface(ar2->intf[0]);
+ fail1:
+ return r;
+}
+
static void ati_remote2_close(struct input_dev *idev)
{
struct ati_remote2 *ar2 = input_get_drvdata(idev);
- usb_kill_urb(ar2->urb[0]);
- usb_kill_urb(ar2->urb[1]);
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
+ ati_remote2_kill_urbs(ar2);
+
+ ar2->flags &= ~ATI_REMOTE2_OPENED;
+
+ mutex_unlock(&ati_remote2_mutex);
}
static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
@@ -172,7 +243,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
mode = data[0] & 0x0F;
- if (mode > 4) {
+ if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[0]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
@@ -191,7 +262,7 @@ static int ati_remote2_lookup(unsigned int hw_code)
{
int i;
- for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
+ for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
if (ati_remote2_key_table[i].hw_code == hw_code)
return i;
@@ -211,7 +282,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
mode = data[0] & 0x0F;
- if (mode > 4) {
+ if (mode > ATI_REMOTE2_PC) {
dev_err(&ar2->intf[1]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
@@ -219,10 +290,6 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
}
hw_code = data[2];
- /*
- * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
- * Use the mode byte to figure out which one was pressed.
- */
if (hw_code == 0x3f) {
/*
* For some incomprehensible reason the mouse pad generates
@@ -236,8 +303,6 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
if (data[1] == 0)
ar2->mode = mode;
-
- hw_code |= mode << 8;
}
if (!((1 << mode) & mode_mask))
@@ -260,8 +325,8 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
case 2: /* repeat */
/* No repeat for mouse buttons. */
- if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
- ati_remote2_key_table[index].key_code == BTN_RIGHT)
+ if (ar2->keycode[mode][index] == BTN_LEFT ||
+ ar2->keycode[mode][index] == BTN_RIGHT)
return;
if (!time_after_eq(jiffies, ar2->jiffies))
@@ -276,7 +341,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
return;
}
- input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]);
+ input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
input_sync(idev);
}
@@ -287,6 +352,7 @@ static void ati_remote2_complete_mouse(struct urb *urb)
switch (urb->status) {
case 0:
+ usb_mark_last_busy(ar2->udev);
ati_remote2_input_mouse(ar2);
break;
case -ENOENT:
@@ -297,6 +363,7 @@ static void ati_remote2_complete_mouse(struct urb *urb)
"%s(): urb status = %d\n", __func__, urb->status);
return;
default:
+ usb_mark_last_busy(ar2->udev);
dev_err(&ar2->intf[0]->dev,
"%s(): urb status = %d\n", __func__, urb->status);
}
@@ -314,6 +381,7 @@ static void ati_remote2_complete_key(struct urb *urb)
switch (urb->status) {
case 0:
+ usb_mark_last_busy(ar2->udev);
ati_remote2_input_key(ar2);
break;
case -ENOENT:
@@ -324,6 +392,7 @@ static void ati_remote2_complete_key(struct urb *urb)
"%s(): urb status = %d\n", __func__, urb->status);
return;
default:
+ usb_mark_last_busy(ar2->udev);
dev_err(&ar2->intf[1]->dev,
"%s(): urb status = %d\n", __func__, urb->status);
}
@@ -334,10 +403,60 @@ static void ati_remote2_complete_key(struct urb *urb)
"%s(): usb_submit_urb() = %d\n", __func__, r);
}
+static int ati_remote2_getkeycode(struct input_dev *idev,
+ int scancode, int *keycode)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int index, mode;
+
+ mode = scancode >> 8;
+ if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
+ return -EINVAL;
+
+ index = ati_remote2_lookup(scancode & 0xFF);
+ if (index < 0)
+ return -EINVAL;
+
+ *keycode = ar2->keycode[mode][index];
+ return 0;
+}
+
+static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
+{
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
+ int index, mode, old_keycode;
+
+ mode = scancode >> 8;
+ if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
+ return -EINVAL;
+
+ index = ati_remote2_lookup(scancode & 0xFF);
+ if (index < 0)
+ return -EINVAL;
+
+ if (keycode < KEY_RESERVED || keycode > KEY_MAX)
+ return -EINVAL;
+
+ old_keycode = ar2->keycode[mode][index];
+ ar2->keycode[mode][index] = keycode;
+ set_bit(keycode, idev->keybit);
+
+ for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
+ for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
+ if (ar2->keycode[mode][index] == old_keycode)
+ return 0;
+ }
+ }
+
+ clear_bit(old_keycode, idev->keybit);
+
+ return 0;
+}
+
static int ati_remote2_input_init(struct ati_remote2 *ar2)
{
struct input_dev *idev;
- int i, retval;
+ int index, mode, retval;
idev = input_allocate_device();
if (!idev)
@@ -350,8 +469,26 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT);
idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
- set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
+
+ for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
+ for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
+ ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
+ set_bit(ar2->keycode[mode][index], idev->keybit);
+ }
+ }
+
+ /* AUX1-AUX4 and PC generate the same scancode. */
+ index = ati_remote2_lookup(0x3f);
+ ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
+ ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
+ ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
+ ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
+ ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
+ set_bit(KEY_PROG1, idev->keybit);
+ set_bit(KEY_PROG2, idev->keybit);
+ set_bit(KEY_PROG3, idev->keybit);
+ set_bit(KEY_PROG4, idev->keybit);
+ set_bit(KEY_PC, idev->keybit);
idev->rep[REP_DELAY] = 250;
idev->rep[REP_PERIOD] = 33;
@@ -359,6 +496,9 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
idev->open = ati_remote2_open;
idev->close = ati_remote2_close;
+ idev->getkeycode = ati_remote2_getkeycode;
+ idev->setkeycode = ati_remote2_setkeycode;
+
idev->name = ar2->name;
idev->phys = ar2->phys;
@@ -490,6 +630,8 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d
usb_set_intfdata(interface, ar2);
+ interface->needs_remote_wakeup = 1;
+
return 0;
fail2:
@@ -522,6 +664,57 @@ static void ati_remote2_disconnect(struct usb_interface *interface)
kfree(ar2);
}
+static int ati_remote2_suspend(struct usb_interface *interface,
+ pm_message_t message)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ ati_remote2_kill_urbs(ar2);
+
+ ar2->flags |= ATI_REMOTE2_SUSPENDED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return 0;
+}
+
+static int ati_remote2_resume(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ if (!r)
+ ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
static int __init ati_remote2_init(void)
{
int r;
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
new file mode 100644
index 00000000000..bce160f4349
--- /dev/null
+++ b/drivers/input/misc/cm109.c
@@ -0,0 +1,882 @@
+/*
+ * Driver for the VoIP USB phones with CM109 chipsets.
+ *
+ * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+/*
+ * Tested devices:
+ * - Komunikate KIP1000
+ * - Genius G-talk
+ * - Allied-Telesis Corega USBPH01
+ * - ...
+ *
+ * This driver is based on the yealink.c driver
+ *
+ * Thanks to:
+ * - Authors of yealink.c
+ * - Thomas Reitmayr
+ * - Oliver Neukum for good review comments and code
+ * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
+ * - Dmitry Torokhov for valuable input and review
+ *
+ * Todo:
+ * - Read/write EEPROM
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/rwsem.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_VERSION "20080805"
+#define DRIVER_AUTHOR "Alfred E. Heggestad"
+#define DRIVER_DESC "CM109 phone driver"
+
+static char *phone = "kip1000";
+module_param(phone, charp, S_IRUSR);
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+
+enum {
+ /* HID Registers */
+ HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */
+ HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */
+ HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */
+ HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */
+ HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
+ HID_OR1 = 0x01, /* GPO - General Purpose Output */
+ HID_OR2 = 0x02, /* Set GPIO to input/output mode */
+ HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */
+
+ /* HID_IR0 */
+ RECORD_MUTE = 1 << 3,
+ PLAYBACK_MUTE = 1 << 2,
+ VOLUME_DOWN = 1 << 1,
+ VOLUME_UP = 1 << 0,
+
+ /* HID_OR0 */
+ /* bits 7-6
+ 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
+ and SPDIF
+ 1: HID_OR0-3 are used as generic HID registers
+ 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
+ EEPROM_DATA0-1, EEPROM_CTRL (see Note)
+ 3: Reserved
+ */
+ HID_OR_GPO_BUZ_SPDIF = 0 << 6,
+ HID_OR_GENERIC_HID_REG = 1 << 6,
+ HID_OR_MAP_MCU_EEPROM = 2 << 6,
+
+ BUZZER_ON = 1 << 5,
+
+ /* up to 256 normal keys, up to 16 special keys */
+ KEYMAP_SIZE = 256 + 16,
+};
+
+/* CM109 protocol packet */
+struct cm109_ctl_packet {
+ u8 byte[4];
+} __attribute__ ((packed));
+
+enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
+
+/* CM109 device structure */
+struct cm109_dev {
+ struct input_dev *idev; /* input device */
+ struct usb_device *udev; /* usb device */
+ struct usb_interface *intf;
+
+ /* irq input channel */
+ struct cm109_ctl_packet *irq_data;
+ dma_addr_t irq_dma;
+ struct urb *urb_irq;
+
+ /* control output channel */
+ struct cm109_ctl_packet *ctl_data;
+ dma_addr_t ctl_dma;
+ struct usb_ctrlrequest *ctl_req;
+ dma_addr_t ctl_req_dma;
+ struct urb *urb_ctl;
+ /*
+ * The 3 bitfields below are protected by ctl_submit_lock.
+ * They have to be separate since they are accessed from IRQ
+ * context.
+ */
+ unsigned irq_urb_pending:1; /* irq_urb is in flight */
+ unsigned ctl_urb_pending:1; /* ctl_urb is in flight */
+ unsigned buzzer_pending:1; /* need to issue buzz command */
+ spinlock_t ctl_submit_lock;
+
+ unsigned char buzzer_state; /* on/off */
+
+ /* flags */
+ unsigned open:1;
+ unsigned resetting:1;
+ unsigned shutdown:1;
+
+ /* This mutex protects writes to the above flags */
+ struct mutex pm_mutex;
+
+ unsigned short keymap[KEYMAP_SIZE];
+
+ char phys[64]; /* physical device path */
+ int key_code; /* last reported key */
+ int keybit; /* 0=new scan 1,2,4,8=scan columns */
+ u8 gpi; /* Cached value of GPI (high nibble) */
+};
+
+/******************************************************************************
+ * CM109 key interface
+ *****************************************************************************/
+
+static unsigned short special_keymap(int code)
+{
+ if (code > 0xff) {
+ switch (code - 0xff) {
+ case RECORD_MUTE: return KEY_MUTE;
+ case PLAYBACK_MUTE: return KEY_MUTE;
+ case VOLUME_DOWN: return KEY_VOLUMEDOWN;
+ case VOLUME_UP: return KEY_VOLUMEUP;
+ }
+ }
+ return KEY_RESERVED;
+}
+
+/* Map device buttons to internal key events.
+ *
+ * The "up" and "down" keys, are symbolised by arrows on the button.
+ * The "pickup" and "hangup" keys are symbolised by a green and red phone
+ * on the button.
+
+ Komunikate KIP1000 Keyboard Matrix
+
+ -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10)
+ | | | |
+ <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20)
+ | | | |
+ END - 7 -- 8 -- 9 --> GPI pin 6 (0x40)
+ | | | |
+ OK -- * -- 0 -- # --> GPI pin 7 (0x80)
+ | | | |
+
+ /|\ /|\ /|\ /|\
+ | | | |
+GPO
+pin: 3 2 1 0
+ 0x8 0x4 0x2 0x1
+
+ */
+static unsigned short keymap_kip1000(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x14: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x11: return KEY_NUMERIC_3; /* 3 */
+ case 0x24: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x21: return KEY_NUMERIC_6; /* 6 */
+ case 0x44: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x41: return KEY_NUMERIC_9; /* 9 */
+ case 0x81: return KEY_NUMERIC_POUND; /* # */
+ case 0x84: return KEY_NUMERIC_STAR; /* * */
+ case 0x88: return KEY_ENTER; /* pickup */
+ case 0x48: return KEY_ESC; /* hangup */
+ case 0x28: return KEY_LEFT; /* IN */
+ case 0x18: return KEY_RIGHT; /* OUT */
+ default: return special_keymap(scancode);
+ }
+}
+
+/*
+ Contributed by Shaun Jackman <sjackman@gmail.com>
+
+ Genius G-Talk keyboard matrix
+ 0 1 2 3
+ 4: 0 4 8 Talk
+ 5: 1 5 9 End
+ 6: 2 6 # Up
+ 7: 3 7 * Down
+*/
+static unsigned short keymap_gtalk(int scancode)
+{
+ switch (scancode) {
+ case 0x11: return KEY_NUMERIC_0;
+ case 0x21: return KEY_NUMERIC_1;
+ case 0x41: return KEY_NUMERIC_2;
+ case 0x81: return KEY_NUMERIC_3;
+ case 0x12: return KEY_NUMERIC_4;
+ case 0x22: return KEY_NUMERIC_5;
+ case 0x42: return KEY_NUMERIC_6;
+ case 0x82: return KEY_NUMERIC_7;
+ case 0x14: return KEY_NUMERIC_8;
+ case 0x24: return KEY_NUMERIC_9;
+ case 0x44: return KEY_NUMERIC_POUND; /* # */
+ case 0x84: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* Talk (green handset) */
+ case 0x28: return KEY_ESC; /* End (red handset) */
+ case 0x48: return KEY_UP; /* Menu up (rocker switch) */
+ case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */
+ default: return special_keymap(scancode);
+ }
+}
+
+/*
+ * Keymap for Allied-Telesis Corega USBPH01
+ * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
+ *
+ * Contributed by july@nat.bg
+ */
+static unsigned short keymap_usbph01(int scancode)
+{
+ switch (scancode) {
+ case 0x11: return KEY_NUMERIC_0; /* 0 */
+ case 0x21: return KEY_NUMERIC_1; /* 1 */
+ case 0x41: return KEY_NUMERIC_2; /* 2 */
+ case 0x81: return KEY_NUMERIC_3; /* 3 */
+ case 0x12: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x42: return KEY_NUMERIC_6; /* 6 */
+ case 0x82: return KEY_NUMERIC_7; /* 7 */
+ case 0x14: return KEY_NUMERIC_8; /* 8 */
+ case 0x24: return KEY_NUMERIC_9; /* 9 */
+ case 0x44: return KEY_NUMERIC_POUND; /* # */
+ case 0x84: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* IN */
+ case 0x88: return KEY_RIGHT; /* OUT */
+ default: return special_keymap(scancode);
+ }
+}
+
+static unsigned short (*keymap)(int) = keymap_kip1000;
+
+/*
+ * Completes a request by converting the data into events for the
+ * input subsystem.
+ */
+static void report_key(struct cm109_dev *dev, int key)
+{
+ struct input_dev *idev = dev->idev;
+
+ if (dev->key_code >= 0) {
+ /* old key up */
+ input_report_key(idev, dev->key_code, 0);
+ }
+
+ dev->key_code = key;
+ if (key >= 0) {
+ /* new valid key */
+ input_report_key(idev, key, 1);
+ }
+
+ input_sync(idev);
+}
+
+/******************************************************************************
+ * CM109 usb communication interface
+ *****************************************************************************/
+
+static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
+{
+ int error;
+
+ if (dev->buzzer_state)
+ dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
+ else
+ dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
+
+ error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
+ if (error)
+ err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error);
+}
+
+/*
+ * IRQ handler
+ */
+static void cm109_urb_irq_callback(struct urb *urb)
+{
+ struct cm109_dev *dev = urb->context;
+ const int status = urb->status;
+ int error;
+
+ dev_dbg(&urb->dev->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
+ dev->irq_data->byte[0],
+ dev->irq_data->byte[1],
+ dev->irq_data->byte[2],
+ dev->irq_data->byte[3],
+ dev->keybit);
+
+ if (status) {
+ if (status == -ESHUTDOWN)
+ return;
+ err("%s: urb status %d", __func__, status);
+ }
+
+ /* Special keys */
+ if (dev->irq_data->byte[HID_IR0] & 0x0f) {
+ const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
+ report_key(dev, dev->keymap[0xff + code]);
+ }
+
+ /* Scan key column */
+ if (dev->keybit == 0xf) {
+
+ /* Any changes ? */
+ if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
+ goto out;
+
+ dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
+ dev->keybit = 0x1;
+ } else {
+ report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
+
+ dev->keybit <<= 1;
+ if (dev->keybit > 0x8)
+ dev->keybit = 0xf;
+ }
+
+ out:
+
+ spin_lock(&dev->ctl_submit_lock);
+
+ dev->irq_urb_pending = 0;
+
+ if (likely(!dev->shutdown)) {
+
+ if (dev->buzzer_state)
+ dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
+ else
+ dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
+
+ dev->ctl_data->byte[HID_OR1] = dev->keybit;
+ dev->ctl_data->byte[HID_OR2] = dev->keybit;
+
+ dev->buzzer_pending = 0;
+ dev->ctl_urb_pending = 1;
+
+ error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
+ if (error)
+ err("%s: usb_submit_urb (urb_ctl) failed %d",
+ __func__, error);
+ }
+
+ spin_unlock(&dev->ctl_submit_lock);
+}
+
+static void cm109_urb_ctl_callback(struct urb *urb)
+{
+ struct cm109_dev *dev = urb->context;
+ const int status = urb->status;
+ int error;
+
+ dev_dbg(&urb->dev->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
+ dev->ctl_data->byte[0],
+ dev->ctl_data->byte[1],
+ dev->ctl_data->byte[2],
+ dev->ctl_data->byte[3]);
+
+ if (status)
+ err("%s: urb status %d", __func__, status);
+
+ spin_lock(&dev->ctl_submit_lock);
+
+ dev->ctl_urb_pending = 0;
+
+ if (likely(!dev->shutdown)) {
+
+ if (dev->buzzer_pending) {
+ dev->buzzer_pending = 0;
+ dev->ctl_urb_pending = 1;
+ cm109_submit_buzz_toggle(dev);
+ } else if (likely(!dev->irq_urb_pending)) {
+ /* ask for key data */
+ dev->irq_urb_pending = 1;
+ error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
+ if (error)
+ err("%s: usb_submit_urb (urb_irq) failed %d",
+ __func__, error);
+ }
+ }
+
+ spin_unlock(&dev->ctl_submit_lock);
+}
+
+static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->ctl_submit_lock, flags);
+
+ if (dev->ctl_urb_pending) {
+ /* URB completion will resubmit */
+ dev->buzzer_pending = 1;
+ } else {
+ dev->ctl_urb_pending = 1;
+ cm109_submit_buzz_toggle(dev);
+ }
+
+ spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
+}
+
+static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
+{
+ int error;
+
+ if (on)
+ dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
+ else
+ dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
+
+ error = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ dev->ctl_req->bRequest,
+ dev->ctl_req->bRequestType,
+ le16_to_cpu(dev->ctl_req->wValue),
+ le16_to_cpu(dev->ctl_req->wIndex),
+ dev->ctl_data,
+ USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
+ if (error && error != EINTR)
+ err("%s: usb_control_msg() failed %d", __func__, error);
+}
+
+static void cm109_stop_traffic(struct cm109_dev *dev)
+{
+ dev->shutdown = 1;
+ /*
+ * Make sure other CPUs see this
+ */
+ smp_wmb();
+
+ usb_kill_urb(dev->urb_ctl);
+ usb_kill_urb(dev->urb_irq);
+
+ cm109_toggle_buzzer_sync(dev, 0);
+
+ dev->shutdown = 0;
+ smp_wmb();
+}
+
+static void cm109_restore_state(struct cm109_dev *dev)
+{
+ if (dev->open) {
+ /*
+ * Restore buzzer state.
+ * This will also kick regular URB submission
+ */
+ cm109_toggle_buzzer_async(dev);
+ }
+}
+
+/******************************************************************************
+ * input event interface
+ *****************************************************************************/
+
+static int cm109_input_open(struct input_dev *idev)
+{
+ struct cm109_dev *dev = input_get_drvdata(idev);
+ int error;
+
+ error = usb_autopm_get_interface(dev->intf);
+ if (error < 0) {
+ err("%s - cannot autoresume, result %d",
+ __func__, error);
+ return error;
+ }
+
+ mutex_lock(&dev->pm_mutex);
+
+ dev->buzzer_state = 0;
+ dev->key_code = -1; /* no keys pressed */
+ dev->keybit = 0xf;
+
+ /* issue INIT */
+ dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
+ dev->ctl_data->byte[HID_OR1] = dev->keybit;
+ dev->ctl_data->byte[HID_OR2] = dev->keybit;
+ dev->ctl_data->byte[HID_OR3] = 0x00;
+
+ error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
+ if (error)
+ err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error);
+ else
+ dev->open = 1;
+
+ mutex_unlock(&dev->pm_mutex);
+
+ if (error)
+ usb_autopm_put_interface(dev->intf);
+
+ return error;
+}
+
+static void cm109_input_close(struct input_dev *idev)
+{
+ struct cm109_dev *dev = input_get_drvdata(idev);
+
+ mutex_lock(&dev->pm_mutex);
+
+ /*
+ * Once we are here event delivery is stopped so we
+ * don't need to worry about someone starting buzzer
+ * again
+ */
+ cm109_stop_traffic(dev);
+ dev->open = 0;
+
+ mutex_unlock(&dev->pm_mutex);
+
+ usb_autopm_put_interface(dev->intf);
+}
+
+static int cm109_input_ev(struct input_dev *idev, unsigned int type,
+ unsigned int code, int value)
+{
+ struct cm109_dev *dev = input_get_drvdata(idev);
+
+ dev_dbg(&dev->udev->dev,
+ "input_ev: type=%u code=%u value=%d\n", type, code, value);
+
+ if (type != EV_SND)
+ return -EINVAL;
+
+ switch (code) {
+ case SND_TONE:
+ case SND_BELL:
+ dev->buzzer_state = !!value;
+ if (!dev->resetting)
+ cm109_toggle_buzzer_async(dev);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+
+/******************************************************************************
+ * Linux interface and usb initialisation
+ *****************************************************************************/
+
+struct driver_info {
+ char *name;
+};
+
+static const struct driver_info info_cm109 = {
+ .name = "CM109 USB driver",
+};
+
+enum {
+ VENDOR_ID = 0x0d8c, /* C-Media Electronics */
+ PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
+};
+
+/* table of devices that work with this driver */
+static const struct usb_device_id cm109_usb_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = VENDOR_ID,
+ .idProduct = PRODUCT_ID_CM109,
+ .bInterfaceClass = USB_CLASS_HID,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .driver_info = (kernel_ulong_t) &info_cm109
+ },
+ /* you can add more devices here with product ID 0x0008 - 0x000f */
+ { }
+};
+
+static void cm109_usb_cleanup(struct cm109_dev *dev)
+{
+ if (dev->ctl_req)
+ usb_buffer_free(dev->udev, sizeof(*(dev->ctl_req)),
+ dev->ctl_req, dev->ctl_req_dma);
+ if (dev->ctl_data)
+ usb_buffer_free(dev->udev, USB_PKT_LEN,
+ dev->ctl_data, dev->ctl_dma);
+ if (dev->irq_data)
+ usb_buffer_free(dev->udev, USB_PKT_LEN,
+ dev->irq_data, dev->irq_dma);
+
+ usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */
+ usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */
+ kfree(dev);
+}
+
+static void cm109_usb_disconnect(struct usb_interface *interface)
+{
+ struct cm109_dev *dev = usb_get_intfdata(interface);
+
+ usb_set_intfdata(interface, NULL);
+ input_unregister_device(dev->idev);
+ cm109_usb_cleanup(dev);
+}
+
+static int cm109_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct driver_info *nfo = (struct driver_info *)id->driver_info;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct cm109_dev *dev;
+ struct input_dev *input_dev = NULL;
+ int ret, pipe, i;
+ int error = -ENOMEM;
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ spin_lock_init(&dev->ctl_submit_lock);
+ mutex_init(&dev->pm_mutex);
+
+ dev->udev = udev;
+ dev->intf = intf;
+
+ dev->idev = input_dev = input_allocate_device();
+ if (!input_dev)
+ goto err_out;
+
+ /* allocate usb buffers */
+ dev->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+ GFP_KERNEL, &dev->irq_dma);
+ if (!dev->irq_data)
+ goto err_out;
+
+ dev->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+ GFP_KERNEL, &dev->ctl_dma);
+ if (!dev->ctl_data)
+ goto err_out;
+
+ dev->ctl_req = usb_buffer_alloc(udev, sizeof(*(dev->ctl_req)),
+ GFP_KERNEL, &dev->ctl_req_dma);
+ if (!dev->ctl_req)
+ goto err_out;
+
+ /* allocate urb structures */
+ dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->urb_irq)
+ goto err_out;
+
+ dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->urb_ctl)
+ goto err_out;
+
+ /* get a handle to the interrupt data pipe */
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ if (ret != USB_PKT_LEN)
+ err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+
+ /* initialise irq urb */
+ usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
+ USB_PKT_LEN,
+ cm109_urb_irq_callback, dev, endpoint->bInterval);
+ dev->urb_irq->transfer_dma = dev->irq_dma;
+ dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ dev->urb_irq->dev = udev;
+
+ /* initialise ctl urb */
+ dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_OUT;
+ dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
+ dev->ctl_req->wValue = cpu_to_le16(0x200);
+ dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
+ dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
+
+ usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
+ (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
+ cm109_urb_ctl_callback, dev);
+ dev->urb_ctl->setup_dma = dev->ctl_req_dma;
+ dev->urb_ctl->transfer_dma = dev->ctl_dma;
+ dev->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP |
+ URB_NO_TRANSFER_DMA_MAP;
+ dev->urb_ctl->dev = udev;
+
+ /* find out the physical bus location */
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ /* register settings for the input device */
+ input_dev->name = nfo->name;
+ input_dev->phys = dev->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, dev);
+ input_dev->open = cm109_input_open;
+ input_dev->close = cm109_input_close;
+ input_dev->event = cm109_input_ev;
+
+ input_dev->keycode = dev->keymap;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
+ input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
+
+ /* register available key events */
+ for (i = 0; i < KEYMAP_SIZE; i++) {
+ unsigned short k = keymap(i);
+ dev->keymap[i] = k;
+ __set_bit(k, input_dev->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ error = input_register_device(dev->idev);
+ if (error)
+ goto err_out;
+
+ usb_set_intfdata(intf, dev);
+
+ return 0;
+
+ err_out:
+ input_free_device(input_dev);
+ cm109_usb_cleanup(dev);
+ return error;
+}
+
+static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct cm109_dev *dev = usb_get_intfdata(intf);
+
+ dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
+
+ mutex_lock(&dev->pm_mutex);
+ cm109_stop_traffic(dev);
+ mutex_unlock(&dev->pm_mutex);
+
+ return 0;
+}
+
+static int cm109_usb_resume(struct usb_interface *intf)
+{
+ struct cm109_dev *dev = usb_get_intfdata(intf);
+
+ dev_info(&intf->dev, "cm109: usb_resume\n");
+
+ mutex_lock(&dev->pm_mutex);
+ cm109_restore_state(dev);
+ mutex_unlock(&dev->pm_mutex);
+
+ return 0;
+}
+
+static int cm109_usb_pre_reset(struct usb_interface *intf)
+{
+ struct cm109_dev *dev = usb_get_intfdata(intf);
+
+ mutex_lock(&dev->pm_mutex);
+
+ /*
+ * Make sure input events don't try to toggle buzzer
+ * while we are resetting
+ */
+ dev->resetting = 1;
+ smp_wmb();
+
+ cm109_stop_traffic(dev);
+
+ return 0;
+}
+
+static int cm109_usb_post_reset(struct usb_interface *intf)
+{
+ struct cm109_dev *dev = usb_get_intfdata(intf);
+
+ dev->resetting = 0;
+ smp_wmb();
+
+ cm109_restore_state(dev);
+
+ mutex_unlock(&dev->pm_mutex);
+
+ return 0;
+}
+
+static struct usb_driver cm109_driver = {
+ .name = "cm109",
+ .probe = cm109_usb_probe,
+ .disconnect = cm109_usb_disconnect,
+ .suspend = cm109_usb_suspend,
+ .resume = cm109_usb_resume,
+ .reset_resume = cm109_usb_resume,
+ .pre_reset = cm109_usb_pre_reset,
+ .post_reset = cm109_usb_post_reset,
+ .id_table = cm109_usb_table,
+ .supports_autosuspend = 1,
+};
+
+static int __init cm109_select_keymap(void)
+{
+ /* Load the phone keymap */
+ if (!strcasecmp(phone, "kip1000")) {
+ keymap = keymap_kip1000;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for Komunikate KIP1000 phone loaded\n");
+ } else if (!strcasecmp(phone, "gtalk")) {
+ keymap = keymap_gtalk;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for Genius G-talk phone loaded\n");
+ } else if (!strcasecmp(phone, "usbph01")) {
+ keymap = keymap_usbph01;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else {
+ printk(KERN_ERR KBUILD_MODNAME ": "
+ "Unsupported phone: %s\n", phone);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __init cm109_init(void)
+{
+ int err;
+
+ err = cm109_select_keymap();
+ if (err)
+ return err;
+
+ err = usb_register(&cm109_driver);
+ if (err)
+ return err;
+
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
+
+ return 0;
+}
+
+static void __exit cm109_exit(void)
+{
+ usb_deregister(&cm109_driver);
+}
+
+module_init(cm109_init);
+module_exit(cm109_exit);
+
+MODULE_DEVICE_TABLE(usb, cm109_usb_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index daa9d422033..82ec6b1b646 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -458,35 +458,35 @@ static int hp_sdc_rtc_proc_output (char *buf)
p += sprintf(p, "i8042 rtc\t: READ FAILED!\n");
} else {
p += sprintf(p, "i8042 rtc\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_fhs(&tv)) {
p += sprintf(p, "handshake\t: READ FAILED!\n");
} else {
p += sprintf(p, "handshake\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_mt(&tv)) {
p += sprintf(p, "alarm\t\t: READ FAILED!\n");
} else {
p += sprintf(p, "alarm\t\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_dt(&tv)) {
p += sprintf(p, "delay\t\t: READ FAILED!\n");
} else {
p += sprintf(p, "delay\t\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_ct(&tv)) {
p += sprintf(p, "periodic\t: READ FAILED!\n");
} else {
p += sprintf(p, "periodic\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
p += sprintf(p,
diff --git a/drivers/input/misc/map_to_7segment.h b/drivers/input/misc/map_to_7segment.h
deleted file mode 100644
index a424094d9fe..00000000000
--- a/drivers/input/misc/map_to_7segment.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * drivers/usb/input/map_to_7segment.h
- *
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef MAP_TO_7SEGMENT_H
-#define MAP_TO_7SEGMENT_H
-
-/* This file provides translation primitives and tables for the conversion
- * of (ASCII) characters to a 7-segments notation.
- *
- * The 7 segment's wikipedia notation below is used as standard.
- * See: http://en.wikipedia.org/wiki/Seven_segment_display
- *
- * Notation: +-a-+
- * f b
- * +-g-+
- * e c
- * +-d-+
- *
- * Usage:
- *
- * Register a map variable, and fill it with a character set:
- * static SEG7_DEFAULT_MAP(map_seg7);
- *
- *
- * Then use for conversion:
- * seg7 = map_to_seg7(&map_seg7, some_char);
- * ...
- *
- * In device drivers it is recommended, if required, to make the char map
- * accessible via the sysfs interface using the following scheme:
- *
- * static ssize_t show_map(struct device *dev, char *buf) {
- * memcpy(buf, &map_seg7, sizeof(map_seg7));
- * return sizeof(map_seg7);
- * }
- * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
- * if(cnt != sizeof(map_seg7))
- * return -EINVAL;
- * memcpy(&map_seg7, buf, cnt);
- * return cnt;
- * }
- * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
- *
- * History:
- * 2005-05-31 RFC linux-kernel@vger.kernel.org
- */
-#include <linux/errno.h>
-
-
-#define BIT_SEG7_A 0
-#define BIT_SEG7_B 1
-#define BIT_SEG7_C 2
-#define BIT_SEG7_D 3
-#define BIT_SEG7_E 4
-#define BIT_SEG7_F 5
-#define BIT_SEG7_G 6
-#define BIT_SEG7_RESERVED 7
-
-struct seg7_conversion_map {
- unsigned char table[128];
-};
-
-static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
-{
- return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
-}
-
-#define SEG7_CONVERSION_MAP(_name, _map) \
- struct seg7_conversion_map _name = { .table = { _map } }
-
-/*
- * It is recommended to use a facility that allows user space to redefine
- * custom character sets for LCD devices. Please use a sysfs interface
- * as described above.
- */
-#define MAP_TO_SEG7_SYSFS_FILE "map_seg7"
-
-/*******************************************************************************
- * ASCII conversion table
- ******************************************************************************/
-
-#define _SEG7(l,a,b,c,d,e,f,g) \
- ( a<<BIT_SEG7_A | b<<BIT_SEG7_B | c<<BIT_SEG7_C | d<<BIT_SEG7_D | \
- e<<BIT_SEG7_E | f<<BIT_SEG7_F | g<<BIT_SEG7_G )
-
-#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
- 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-
-#define _MAP_33_47_ASCII_SEG7_SYMBOL \
- _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
- _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
- _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
- _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
- _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
-
-#define _MAP_48_57_ASCII_SEG7_NUMERIC \
- _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
- _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
- _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
- _SEG7('9',1,1,1,1,0,1,1),
-
-#define _MAP_58_64_ASCII_SEG7_SYMBOL \
- _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
- _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
- _SEG7('@',1,1,0,1,1,1,1),
-
-#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
- _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
- _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
- _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_91_96_ASCII_SEG7_SYMBOL \
- _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
- _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
-
-#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
- _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
- _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
- _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_123_126_ASCII_SEG7_SYMBOL \
- _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
- _SEG7('~',1,0,0,0,0,0,0),
-
-/* Maps */
-
-/* This set tries to map as close as possible to the visible characteristics
- * of the ASCII symbol, lowercase and uppercase letters may differ in
- * presentation on the display.
- */
-#define MAP_ASCII7SEG_ALPHANUM \
- _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
- _MAP_33_47_ASCII_SEG7_SYMBOL \
- _MAP_48_57_ASCII_SEG7_NUMERIC \
- _MAP_58_64_ASCII_SEG7_SYMBOL \
- _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
- _MAP_91_96_ASCII_SEG7_SYMBOL \
- _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _MAP_123_126_ASCII_SEG7_SYMBOL
-
-/* This set tries to map as close as possible to the symbolic characteristics
- * of the ASCII character for maximum discrimination.
- * For now this means all alpha chars are in lower case representations.
- * (This for example facilitates the use of hex numbers with uppercase input.)
- */
-#define MAP_ASCII7SEG_ALPHANUM_LC \
- _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
- _MAP_33_47_ASCII_SEG7_SYMBOL \
- _MAP_48_57_ASCII_SEG7_NUMERIC \
- _MAP_58_64_ASCII_SEG7_SYMBOL \
- _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _MAP_91_96_ASCII_SEG7_SYMBOL \
- _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _MAP_123_126_ASCII_SEG7_SYMBOL
-
-#define SEG7_DEFAULT_MAP(_name) \
- SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
-
-#endif /* MAP_TO_7SEGMENT_H */
-
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index d8765cc93d2..c4f42311fde 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -249,7 +249,7 @@ static int bbc_remove(struct of_device *op)
return 0;
}
-static struct of_device_id bbc_beep_match[] = {
+static const struct of_device_id bbc_beep_match[] = {
{
.name = "beep",
.compatible = "SUNW,bbc-beep",
@@ -328,7 +328,7 @@ static int grover_remove(struct of_device *op)
return 0;
}
-static struct of_device_id grover_beep_match[] = {
+static const struct of_device_id grover_beep_match[] = {
{
.name = "beep",
.compatible = "SUNW,smbus-beep",
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index fe268be3293..7c8957dd22c 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -277,6 +277,16 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = {
{ KE_END, 0 }
};
+static struct key_entry keymap_fs_amilo_pro_v3505[] __initdata = {
+ { KE_KEY, 0x01, {KEY_HELP} }, /* Fn+F1 */
+ { KE_KEY, 0x06, {KEY_DISPLAYTOGGLE} }, /* Fn+F4 */
+ { KE_BLUETOOTH, 0x30 }, /* Fn+F10 */
+ { KE_KEY, 0x31, {KEY_MAIL} }, /* mail button */
+ { KE_KEY, 0x36, {KEY_WWW} }, /* www button */
+ { KE_WIFI, 0x78 }, /* satelite dish button */
+ { KE_END, 0 }
+};
+
static struct key_entry keymap_fujitsu_n3510[] __initdata = {
{ KE_KEY, 0x11, {KEY_PROG1} },
{ KE_KEY, 0x12, {KEY_PROG2} },
@@ -618,6 +628,15 @@ static struct dmi_system_id dmi_ids[] __initdata = {
},
{
.callback = dmi_matched,
+ .ident = "Fujitsu-Siemens Amilo Pro Edition V3505",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro Edition V3505"),
+ },
+ .driver_data = keymap_fs_amilo_pro_v3505
+ },
+ {
+ .callback = dmi_matched,
.ident = "Fujitsu-Siemens Amilo M7400",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index facefd3dba2..93a22ac0f88 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -52,8 +52,8 @@
#include <linux/module.h>
#include <linux/rwsem.h>
#include <linux/usb/input.h>
+#include <linux/map_to_7segment.h>
-#include "map_to_7segment.h"
#include "yealink.h"
#define DRIVER_VERSION "yld-20051230"
@@ -999,7 +999,8 @@ static int __init yealink_dev_init(void)
{
int ret = usb_register(&yealink_driver);
if (ret == 0)
- info(DRIVER_DESC ":" DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return ret;
}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-19 10:57:08 +0000