diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_driver.c')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_driver.c | 171 |
1 files changed, 72 insertions, 99 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index daad09a4591..bd0caedafe9 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -31,6 +31,7 @@ * SOFTWARE. */ +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/idr.h> #include <linux/pci.h> @@ -38,6 +39,9 @@ #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/vmalloc.h> +#include <linux/bitmap.h> +#include <linux/slab.h> +#include <linux/module.h> #include "ipath_kernel.h" #include "ipath_verbs.h" @@ -123,24 +127,18 @@ const char *ipath_ibcstatus_str[] = { "LTState1C", "LTState1D", "LTState1E", "LTState1F" }; -static void __devexit ipath_remove_one(struct pci_dev *); -static int __devinit ipath_init_one(struct pci_dev *, - const struct pci_device_id *); +static void ipath_remove_one(struct pci_dev *); +static int ipath_init_one(struct pci_dev *, const struct pci_device_id *); /* Only needed for registration, nothing else needs this info */ #define PCI_VENDOR_ID_PATHSCALE 0x1fc1 -#define PCI_VENDOR_ID_QLOGIC 0x1077 #define PCI_DEVICE_ID_INFINIPATH_HT 0xd -#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10 -#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220 /* Number of seconds before our card status check... */ #define STATUS_TIMEOUT 60 static const struct pci_device_id ipath_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) }, - { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) }, - { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) }, { 0, } }; @@ -149,7 +147,7 @@ MODULE_DEVICE_TABLE(pci, ipath_pci_tbl); static struct pci_driver ipath_driver = { .name = IPATH_DRV_NAME, .probe = ipath_init_one, - .remove = __devexit_p(ipath_remove_one), + .remove = ipath_remove_one, .id_table = ipath_pci_tbl, .driver = { .groups = ipath_driver_attr_groups, @@ -196,22 +194,17 @@ static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev) struct ipath_devdata *dd; int ret; - if (!idr_pre_get(&unit_table, GFP_KERNEL)) { - dd = ERR_PTR(-ENOMEM); - goto bail; - } - - dd = vmalloc(sizeof(*dd)); + dd = vzalloc(sizeof(*dd)); if (!dd) { dd = ERR_PTR(-ENOMEM); goto bail; } - memset(dd, 0, sizeof(*dd)); dd->ipath_unit = -1; + idr_preload(GFP_KERNEL); spin_lock_irqsave(&ipath_devs_lock, flags); - ret = idr_get_new(&unit_table, dd, &dd->ipath_unit); + ret = idr_alloc(&unit_table, dd, 0, 0, GFP_NOWAIT); if (ret < 0) { printk(KERN_ERR IPATH_DRV_NAME ": Could not allocate unit ID: error %d\n", -ret); @@ -219,6 +212,7 @@ static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev) dd = ERR_PTR(ret); goto bail_unlock; } + dd->ipath_unit = ret; dd->pcidev = pdev; pci_set_drvdata(pdev, dd); @@ -227,7 +221,7 @@ static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev) bail_unlock: spin_unlock_irqrestore(&ipath_devs_lock, flags); - + idr_preload_end(); bail: return dd; } @@ -392,14 +386,14 @@ done: ipath_enable_armlaunch(dd); } -static int __devinit ipath_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) +static void cleanup_device(struct ipath_devdata *dd); + +static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret, len, j; struct ipath_devdata *dd; unsigned long long addr; u32 bar0 = 0, bar1 = 0; - u8 rev; dd = ipath_alloc_devdata(pdev); if (IS_ERR(dd)) { @@ -470,14 +464,14 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, goto bail_disable; } - ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); if (ret) { /* * if the 64 bit setup fails, try 32 bit. Some systems * do not setup 64 bit maps on systems with 2GB or less * memory installed. */ - ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { dev_info(&pdev->dev, "Unable to set DMA mask for unit %u: %d\n", @@ -486,7 +480,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, } else { ipath_dbg("No 64bit DMA mask, used 32 bit mask\n"); - ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) dev_info(&pdev->dev, "Unable to set DMA consistent mask " @@ -496,7 +490,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, } } else { - ret = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); if (ret) dev_info(&pdev->dev, "Unable to set DMA consistent mask " @@ -518,30 +512,9 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, /* setup the chip-specific functions, as early as possible. */ switch (ent->device) { case PCI_DEVICE_ID_INFINIPATH_HT: -#ifdef CONFIG_HT_IRQ ipath_init_iba6110_funcs(dd); break; -#else - ipath_dev_err(dd, "QLogic HT device 0x%x cannot work if " - "CONFIG_HT_IRQ is not enabled\n", ent->device); - return -ENODEV; -#endif - case PCI_DEVICE_ID_INFINIPATH_PE800: -#ifdef CONFIG_PCI_MSI - ipath_init_iba6120_funcs(dd); - break; -#else - ipath_dev_err(dd, "QLogic PCIE device 0x%x cannot work if " - "CONFIG_PCI_MSI is not enabled\n", ent->device); - return -ENODEV; -#endif - case PCI_DEVICE_ID_INFINIPATH_7220: -#ifndef CONFIG_PCI_MSI - ipath_dbg("CONFIG_PCI_MSI is not enabled, " - "using INTx for unit %u\n", dd->ipath_unit); -#endif - ipath_init_iba7220_funcs(dd); - break; + default: ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, " "failing\n", ent->device); @@ -551,9 +524,8 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, for (j = 0; j < 6; j++) { if (!pdev->resource[j].start) continue; - ipath_cdbg(VERBOSE, "BAR %d start %llx, end %llx, len %llx\n", - j, (unsigned long long)pdev->resource[j].start, - (unsigned long long)pdev->resource[j].end, + ipath_cdbg(VERBOSE, "BAR %d %pR, len %llx\n", + j, &pdev->resource[j], (unsigned long long)pci_resource_len(pdev, j)); } @@ -563,13 +535,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, goto bail_regions; } - ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - if (ret) { - ipath_dev_err(dd, "Failed to read PCI revision ID unit " - "%u: err %d\n", dd->ipath_unit, -ret); - goto bail_regions; /* shouldn't ever happen */ - } - dd->ipath_pcirev = rev; + dd->ipath_pcirev = pdev->revision; #if defined(__powerpc__) /* There isn't a generic way to specify writethrough mappings */ @@ -639,8 +605,13 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, goto bail; bail_irqsetup: - if (pdev->irq) - free_irq(pdev->irq, dd); + cleanup_device(dd); + + if (dd->ipath_irq) + dd->ipath_f_free_irq(dd); + + if (dd->ipath_f_cleanup) + dd->ipath_f_cleanup(dd); bail_iounmap: iounmap((volatile void __iomem *) dd->ipath_kregbase); @@ -658,9 +629,11 @@ bail: return ret; } -static void __devexit cleanup_device(struct ipath_devdata *dd) +static void cleanup_device(struct ipath_devdata *dd) { int port; + struct ipath_portdata **tmp; + unsigned long flags; if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) { /* can't do anything more with chip; needs re-init */ @@ -742,23 +715,24 @@ static void __devexit cleanup_device(struct ipath_devdata *dd) /* * free any resources still in use (usually just kernel ports) - * at unload; we do for portcnt, not cfgports, because cfgports - * could have changed while we were loaded. + * at unload; we do for portcnt, because that's what we allocate. + * We acquire lock to be really paranoid that ipath_pd isn't being + * accessed from some interrupt-related code (that should not happen, + * but best to be sure). */ + spin_lock_irqsave(&dd->ipath_uctxt_lock, flags); + tmp = dd->ipath_pd; + dd->ipath_pd = NULL; + spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); for (port = 0; port < dd->ipath_portcnt; port++) { - struct ipath_portdata *pd = dd->ipath_pd[port]; - dd->ipath_pd[port] = NULL; + struct ipath_portdata *pd = tmp[port]; + tmp[port] = NULL; /* debugging paranoia */ ipath_free_pddata(dd, pd); } - kfree(dd->ipath_pd); - /* - * debuggability, in case some cleanup path tries to use it - * after this - */ - dd->ipath_pd = NULL; + kfree(tmp); } -static void __devexit ipath_remove_one(struct pci_dev *pdev) +static void ipath_remove_one(struct pci_dev *pdev) { struct ipath_devdata *dd = pci_get_drvdata(pdev); @@ -770,7 +744,7 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev) */ ipath_shutdown_device(dd); - flush_scheduled_work(); + flush_workqueue(ib_wq); if (dd->verbs_dev) ipath_unregister_ib_device(dd->verbs_dev); @@ -1259,7 +1233,7 @@ reloop: */ ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf" " %x, len %x hdrq+%x rhf: %Lx\n", - etail, tlen, l, + etail, tlen, l, (unsigned long long) le64_to_cpu(*(__le64 *) rhf_addr)); if (ipath_debug & __IPATH_ERRPKTDBG) { u32 j, *d, dw = rsize-2; @@ -1457,7 +1431,8 @@ static void ipath_reset_availshadow(struct ipath_devdata *dd) 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */ if (oldval != dd->ipath_pioavailshadow[i]) ipath_dbg("shadow[%d] was %Lx, now %lx\n", - i, oldval, dd->ipath_pioavailshadow[i]); + i, (unsigned long long) oldval, + dd->ipath_pioavailshadow[i]); } spin_unlock_irqrestore(&ipath_pioavail_lock, flags); } @@ -1692,7 +1667,7 @@ void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start, unsigned len, int avail) { unsigned long flags; - unsigned end, cnt = 0, next; + unsigned end, cnt = 0; /* There are two bits per send buffer (busy and generation) */ start *= 2; @@ -1743,12 +1718,7 @@ void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start, if (dd->ipath_pioupd_thresh) { end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k); - next = find_first_bit(dd->ipath_pioavailkernel, end); - while (next < end) { - cnt++; - next = find_next_bit(dd->ipath_pioavailkernel, end, - next + 1); - } + cnt = bitmap_weight(dd->ipath_pioavailkernel, end); } spin_unlock_irqrestore(&ipath_pioavail_lock, flags); @@ -2411,7 +2381,7 @@ void ipath_shutdown_device(struct ipath_devdata *dd) /* * clear SerdesEnable and turn the leds off; do this here because * we are unloading, so don't count on interrupts to move along - * Turn the LEDs off explictly for the same reason. + * Turn the LEDs off explicitly for the same reason. */ dd->ipath_f_quiet_serdes(dd); @@ -2530,11 +2500,6 @@ static int __init infinipath_init(void) * the PCI subsystem. */ idr_init(&unit_table); - if (!idr_pre_get(&unit_table, GFP_KERNEL)) { - printk(KERN_ERR IPATH_DRV_NAME ": idr_pre_get() failed\n"); - ret = -ENOMEM; - goto bail; - } ret = pci_register_driver(&ipath_driver); if (ret < 0) { @@ -2585,6 +2550,7 @@ int ipath_reset_device(int unit) { int ret, i; struct ipath_devdata *dd = ipath_lookup(unit); + unsigned long flags; if (!dd) { ret = -ENODEV; @@ -2610,18 +2576,21 @@ int ipath_reset_device(int unit) goto bail; } + spin_lock_irqsave(&dd->ipath_uctxt_lock, flags); if (dd->ipath_pd) for (i = 1; i < dd->ipath_cfgports; i++) { - if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) { - ipath_dbg("unit %u port %d is in use " - "(PID %u cmd %s), can't reset\n", - unit, i, - pid_nr(dd->ipath_pd[i]->port_pid), - dd->ipath_pd[i]->port_comm); - ret = -EBUSY; - goto bail; - } + if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt) + continue; + spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); + ipath_dbg("unit %u port %d is in use " + "(PID %u cmd %s), can't reset\n", + unit, i, + pid_nr(dd->ipath_pd[i]->port_pid), + dd->ipath_pd[i]->port_comm); + ret = -EBUSY; + goto bail; } + spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); if (dd->ipath_flags & IPATH_HAS_SEND_DMA) teardown_sdma(dd); @@ -2655,9 +2624,12 @@ static int ipath_signal_procs(struct ipath_devdata *dd, int sig) { int i, sub, any = 0; struct pid *pid; + unsigned long flags; if (!dd->ipath_pd) return 0; + + spin_lock_irqsave(&dd->ipath_uctxt_lock, flags); for (i = 1; i < dd->ipath_cfgports; i++) { if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt) continue; @@ -2681,6 +2653,7 @@ static int ipath_signal_procs(struct ipath_devdata *dd, int sig) any++; } } + spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags); return any; } @@ -2703,7 +2676,7 @@ static void ipath_hol_signal_up(struct ipath_devdata *dd) * to prevent HoL blocking, then start the HoL timer that * periodically continues, then stop procs, so they can detect * link down if they want, and do something about it. - * Timer may already be running, so use __mod_timer, not add_timer. + * Timer may already be running, so use mod_timer, not add_timer. */ void ipath_hol_down(struct ipath_devdata *dd) { @@ -2712,7 +2685,7 @@ void ipath_hol_down(struct ipath_devdata *dd) dd->ipath_hol_next = IPATH_HOL_DOWNCONT; dd->ipath_hol_timer.expires = jiffies + msecs_to_jiffies(ipath_hol_timeout_ms); - __mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires); + mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires); } /* @@ -2751,7 +2724,7 @@ void ipath_hol_event(unsigned long opaque) else { dd->ipath_hol_timer.expires = jiffies + msecs_to_jiffies(ipath_hol_timeout_ms); - __mod_timer(&dd->ipath_hol_timer, + mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires); } } |
