diff options
Diffstat (limited to 'drivers/iio/adc')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 65 | ||||
| -rw-r--r-- | drivers/iio/adc/Makefile | 6 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7266.c | 3 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7298.c | 408 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7476.c | 2 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7793.c | 876 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7887.c | 378 | ||||
| -rw-r--r-- | drivers/iio/adc/ad_sigma_delta.c | 2 | ||||
| -rw-r--r-- | drivers/iio/adc/at91_adc.c | 6 | ||||
| -rw-r--r-- | drivers/iio/adc/max1363.c | 1700 | ||||
| -rw-r--r-- | drivers/iio/adc/ti-adc081c.c | 161 |
11 files changed, 3598 insertions, 9 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 49275812033..961b8d0a4ba 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -18,6 +18,18 @@ config AD7266 Say yes here to build support for Analog Devices AD7265 and AD7266 ADCs. +config AD7298 + tristate "Analog Devices AD7298 ADC driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Analog Devices AD7298 + 8 Channel ADC with temperature sensor. + + To compile this driver as a module, choose M here: the + module will be called ad7298. + config AD7791 tristate "Analog Devices AD7791 ADC driver" depends on SPI @@ -30,6 +42,18 @@ config AD7791 To compile this driver as a module, choose M here: the module will be called ad7791. +config AD7793 + tristate "Analog Devices AD7793 and similar ADCs driver" + depends on SPI + select AD_SIGMA_DELTA + help + Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, + AD7794 and AD7795 SPI analog to digital converters (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called AD7793. + config AD7476 tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" depends on SPI @@ -45,6 +69,19 @@ config AD7476 To compile this driver as a module, choose M here: the module will be called ad7476. +config AD7887 + tristate "Analog Devices AD7887 ADC driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Analog Devices + AD7887 SPI analog to digital converter (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7887. + config AT91_ADC tristate "Atmel AT91 ADC" depends on ARCH_AT91 @@ -60,4 +97,32 @@ config LP8788_ADC help Say yes here to build support for TI LP8788 ADC. +config MAX1363 + tristate "Maxim max1363 ADC driver" + depends on I2C + select IIO_TRIGGER + select MAX1363_RING_BUFFER + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Say yes here to build support for many Maxim i2c analog to digital + converters (ADC). (max1361, max1362, max1363, max1364, max1036, + max1037, max1038, max1039, max1136, max1136, max1137, max1138, + max1139, max1236, max1237, max11238, max1239, max11600, max11601, + max11602, max11603, max11604, max11605, max11606, max11607, + max11608, max11609, max11610, max11611, max11612, max11613, + max11614, max11615, max11616, max11617, max11644, max11645, + max11646, max11647) Provides direct access via sysfs and buffered + data via the iio dev interface. + +config TI_ADC081C + tristate "Texas Instruments ADC081C021/027" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADC081C021 + and ADC081C027 ADC chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc081c. + endmenu diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 900995d5e17..472fd7cd241 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -4,7 +4,13 @@ obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o obj-$(CONFIG_AD7266) += ad7266.o +obj-$(CONFIG_AD7298) += ad7298.o obj-$(CONFIG_AD7476) += ad7476.o obj-$(CONFIG_AD7791) += ad7791.o +obj-$(CONFIG_AD7793) += ad7793.o +obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AT91_ADC) += at91_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o +obj-$(CONFIG_MAX1363) += max1363.o +obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o + diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index b11f214779a..a6f4fc5f820 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -91,7 +91,6 @@ static irqreturn_t ad7266_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; - struct iio_buffer *buffer = indio_dev->buffer; struct ad7266_state *st = iio_priv(indio_dev); int ret; @@ -99,7 +98,7 @@ static irqreturn_t ad7266_trigger_handler(int irq, void *p) if (ret == 0) { if (indio_dev->scan_timestamp) ((s64 *)st->data)[1] = pf->timestamp; - iio_push_to_buffer(buffer, (u8 *)st->data); + iio_push_to_buffers(indio_dev, (u8 *)st->data); } iio_trigger_notify_done(indio_dev->trig); diff --git a/drivers/iio/adc/ad7298.c b/drivers/iio/adc/ad7298.c new file mode 100644 index 00000000000..2364807a5d6 --- /dev/null +++ b/drivers/iio/adc/ad7298.c @@ -0,0 +1,408 @@ +/* + * AD7298 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/interrupt.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/platform_data/ad7298.h> + +#define AD7298_WRITE (1 << 15) /* write to the control register */ +#define AD7298_REPEAT (1 << 14) /* repeated conversion enable */ +#define AD7298_CH(x) (1 << (13 - (x))) /* channel select */ +#define AD7298_TSENSE (1 << 5) /* temperature conversion enable */ +#define AD7298_EXTREF (1 << 2) /* external reference enable */ +#define AD7298_TAVG (1 << 1) /* temperature sensor averaging enable */ +#define AD7298_PDD (1 << 0) /* partial power down enable */ + +#define AD7298_MAX_CHAN 8 +#define AD7298_BITS 12 +#define AD7298_STORAGE_BITS 16 +#define AD7298_INTREF_mV 2500 + +#define AD7298_CH_TEMP 9 + +#define RES_MASK(bits) ((1 << (bits)) - 1) + +struct ad7298_state { + struct spi_device *spi; + struct regulator *reg; + unsigned ext_ref; + struct spi_transfer ring_xfer[10]; + struct spi_transfer scan_single_xfer[3]; + struct spi_message ring_msg; + struct spi_message scan_single_msg; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + __be16 rx_buf[12] ____cacheline_aligned; + __be16 tx_buf[2]; +}; + +#define AD7298_V_CHAN(index) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec ad7298_channels[] = { + { + .type = IIO_TEMP, + .indexed = 1, + .channel = 0, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, + .address = AD7298_CH_TEMP, + .scan_index = -1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + }, + }, + AD7298_V_CHAN(0), + AD7298_V_CHAN(1), + AD7298_V_CHAN(2), + AD7298_V_CHAN(3), + AD7298_V_CHAN(4), + AD7298_V_CHAN(5), + AD7298_V_CHAN(6), + AD7298_V_CHAN(7), + IIO_CHAN_SOFT_TIMESTAMP(8), +}; + +/** + * ad7298_update_scan_mode() setup the spi transfer buffer for the new scan mask + **/ +static int ad7298_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *active_scan_mask) +{ + struct ad7298_state *st = iio_priv(indio_dev); + int i, m; + unsigned short command; + int scan_count; + + /* Now compute overall size */ + scan_count = bitmap_weight(active_scan_mask, indio_dev->masklength); + + command = AD7298_WRITE | st->ext_ref; + + for (i = 0, m = AD7298_CH(0); i < AD7298_MAX_CHAN; i++, m >>= 1) + if (test_bit(i, active_scan_mask)) + command |= m; + + st->tx_buf[0] = cpu_to_be16(command); + + /* build spi ring message */ + st->ring_xfer[0].tx_buf = &st->tx_buf[0]; + st->ring_xfer[0].len = 2; + st->ring_xfer[0].cs_change = 1; + st->ring_xfer[1].tx_buf = &st->tx_buf[1]; + st->ring_xfer[1].len = 2; + st->ring_xfer[1].cs_change = 1; + + spi_message_init(&st->ring_msg); + spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg); + spi_message_add_tail(&st->ring_xfer[1], &st->ring_msg); + + for (i = 0; i < scan_count; i++) { + st->ring_xfer[i + 2].rx_buf = &st->rx_buf[i]; + st->ring_xfer[i + 2].len = 2; + st->ring_xfer[i + 2].cs_change = 1; + spi_message_add_tail(&st->ring_xfer[i + 2], &st->ring_msg); + } + /* make sure last transfer cs_change is not set */ + st->ring_xfer[i + 1].cs_change = 0; + + return 0; +} + +/** + * ad7298_trigger_handler() bh of trigger launched polling to ring buffer + * + * Currently there is no option in this driver to disable the saving of + * timestamps within the ring. + **/ +static irqreturn_t ad7298_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7298_state *st = iio_priv(indio_dev); + s64 time_ns = 0; + int b_sent; + + b_sent = spi_sync(st->spi, &st->ring_msg); + if (b_sent) + goto done; + + if (indio_dev->scan_timestamp) { + time_ns = iio_get_time_ns(); + memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64), + &time_ns, sizeof(time_ns)); + } + + iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ad7298_scan_direct(struct ad7298_state *st, unsigned ch) +{ + int ret; + st->tx_buf[0] = cpu_to_be16(AD7298_WRITE | st->ext_ref | + (AD7298_CH(0) >> ch)); + + ret = spi_sync(st->spi, &st->scan_single_msg); + if (ret) + return ret; + + return be16_to_cpu(st->rx_buf[0]); +} + +static int ad7298_scan_temp(struct ad7298_state *st, int *val) +{ + int ret; + __be16 buf; + + buf = cpu_to_be16(AD7298_WRITE | AD7298_TSENSE | + AD7298_TAVG | st->ext_ref); + + ret = spi_write(st->spi, (u8 *)&buf, 2); + if (ret) + return ret; + + buf = cpu_to_be16(0); + + ret = spi_write(st->spi, (u8 *)&buf, 2); + if (ret) + return ret; + + usleep_range(101, 1000); /* sleep > 100us */ + + ret = spi_read(st->spi, (u8 *)&buf, 2); + if (ret) + return ret; + + *val = sign_extend32(be16_to_cpu(buf), 11); + + return 0; +} + +static int ad7298_get_ref_voltage(struct ad7298_state *st) +{ + int vref; + + if (st->ext_ref) { + vref = regulator_get_voltage(st->reg); + if (vref < 0) + return vref; + + return vref / 1000; + } else { + return AD7298_INTREF_mV; + } +} + +static int ad7298_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + int ret; + struct ad7298_state *st = iio_priv(indio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { + ret = -EBUSY; + } else { + if (chan->address == AD7298_CH_TEMP) + ret = ad7298_scan_temp(st, val); + else + ret = ad7298_scan_direct(st, chan->address); + } + mutex_unlock(&indio_dev->mlock); + + if (ret < 0) + return ret; + + if (chan->address != AD7298_CH_TEMP) + *val = ret & RES_MASK(AD7298_BITS); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + *val = ad7298_get_ref_voltage(st); + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_TEMP: + *val = ad7298_get_ref_voltage(st); + *val2 = 10; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + *val = 1093 - 2732500 / ad7298_get_ref_voltage(st); + return IIO_VAL_INT; + } + return -EINVAL; +} + +static const struct iio_info ad7298_info = { + .read_raw = &ad7298_read_raw, + .update_scan_mode = ad7298_update_scan_mode, + .driver_module = THIS_MODULE, +}; + +static int __devinit ad7298_probe(struct spi_device *spi) +{ + struct ad7298_platform_data *pdata = spi->dev.platform_data; + struct ad7298_state *st; + struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st)); + int ret; + + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + if (pdata && pdata->ext_ref) + st->ext_ref = AD7298_EXTREF; + + if (st->ext_ref) { + st->reg = regulator_get(&spi->dev, "vref"); + if (IS_ERR(st->reg)) { + ret = PTR_ERR(st->reg); + goto error_free; + } + ret = regulator_enable(st->reg); + if (ret) + goto error_put_reg; + } + + spi_set_drvdata(spi, indio_dev); + + st->spi = spi; + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ad7298_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7298_channels); + indio_dev->info = &ad7298_info; + + /* Setup default message */ + + st->scan_single_xfer[0].tx_buf = &st->tx_buf[0]; + st->scan_single_xfer[0].len = 2; + st->scan_single_xfer[0].cs_change = 1; + st->scan_single_xfer[1].tx_buf = &st->tx_buf[1]; + st->scan_single_xfer[1].len = 2; + st->scan_single_xfer[1].cs_change = 1; + st->scan_single_xfer[2].rx_buf = &st->rx_buf[0]; + st->scan_single_xfer[2].len = 2; + + spi_message_init(&st->scan_single_msg); + spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg); + spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg); + spi_message_add_tail(&st->scan_single_xfer[2], &st->scan_single_msg); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + &ad7298_trigger_handler, NULL); + if (ret) + goto error_disable_reg; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_cleanup_ring; + + return 0; + +error_cleanup_ring: + iio_triggered_buffer_cleanup(indio_dev); +error_disable_reg: + if (st->ext_ref) + regulator_disable(st->reg); +error_put_reg: + if (st->ext_ref) + regulator_put(st->reg); +error_free: + iio_device_free(indio_dev); + + return ret; +} + +static int __devexit ad7298_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad7298_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + if (st->ext_ref) { + regulator_disable(st->reg); + regulator_put(st->reg); + } + iio_device_free(indio_dev); + + return 0; +} + +static const struct spi_device_id ad7298_id[] = { + {"ad7298", 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad7298_id); + +static struct spi_driver ad7298_driver = { + .driver = { + .name = "ad7298", + .owner = THIS_MODULE, + }, + .probe = ad7298_probe, + .remove = __devexit_p(ad7298_remove), + .id_table = ad7298_id, +}; +module_spi_driver(ad7298_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("Analog Devices AD7298 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c index 7f2f45a0a48..330248bfeba 100644 --- a/drivers/iio/adc/ad7476.c +++ b/drivers/iio/adc/ad7476.c @@ -76,7 +76,7 @@ static irqreturn_t ad7476_trigger_handler(int irq, void *p) if (indio_dev->scan_timestamp) ((s64 *)st->data)[1] = time_ns; - iio_push_to_buffer(indio_dev->buffer, st->data); + iio_push_to_buffers(indio_dev, st->data); done: iio_trigger_notify_done(indio_dev->trig); diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c new file mode 100644 index 00000000000..334e31ff7a4 --- /dev/null +++ b/drivers/iio/adc/ad7793.c @@ -0,0 +1,876 @@ +/* + * AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver + * + * Copyright 2011-2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/adc/ad_sigma_delta.h> +#include <linux/platform_data/ad7793.h> + +/* Registers */ +#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */ +#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */ +#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */ +#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */ +#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */ +#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */ +#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */ +#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit + * (AD7792)/24-bit (AD7793)) */ +#define AD7793_REG_FULLSALE 7 /* Full-Scale Register + * (RW, 16-bit (AD7792)/24-bit (AD7793)) */ + +/* Communications Register Bit Designations (AD7793_REG_COMM) */ +#define AD7793_COMM_WEN (1 << 7) /* Write Enable */ +#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */ +#define AD7793_COMM_READ (1 << 6) /* Read Operation */ +#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ + +/* Status Register Bit Designations (AD7793_REG_STAT) */ +#define AD7793_STAT_RDY (1 << 7) /* Ready */ +#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ +#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */ +#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */ +#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */ + +/* Mode Register Bit Designations (AD7793_REG_MODE) */ +#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */ +#define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */ +#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */ +#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */ + +#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */ +#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */ +#define AD7793_MODE_IDLE 2 /* Idle Mode */ +#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */ +#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ +#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ +#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ +#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ + +#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not + * available at the CLK pin */ +#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available + * at the CLK pin */ +#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */ +#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */ + +/* Configuration Register Bit Designations (AD7793_REG_CONF) */ +#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage + * Generator Enable */ +#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */ +#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */ +#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */ +#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */ +#define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */ +#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */ +#define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */ +#define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */ + +#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */ +#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */ +#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */ +#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */ +#define AD7793_CH_TEMP 6 /* Temp Sensor */ +#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */ + +#define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */ +#define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */ +#define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */ +#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */ + +/* ID Register Bit Designations (AD7793_REG_ID) */ +#define AD7785_ID 0xB +#define AD7792_ID 0xA +#define AD7793_ID 0xB +#define AD7794_ID 0xF +#define AD7795_ID 0xF +#define AD7796_ID 0xA +#define AD7797_ID 0xB +#define AD7798_ID 0x8 +#define AD7799_ID 0x9 +#define AD7793_ID_MASK 0xF + +/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */ +#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1, + * IEXC2 connect to IOUT2 */ +#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2, + * IEXC2 connect to IOUT1 */ +#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources + * IEXC1,2 connect to IOUT1 */ +#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources + * IEXC1,2 connect to IOUT2 */ + +#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */ +#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */ +#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */ + +/* NOTE: + * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output. + * In order to avoid contentions on the SPI bus, it's therefore necessary + * to use spi bus locking. + * + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. + */ + +#define AD7793_FLAG_HAS_CLKSEL BIT(0) +#define AD7793_FLAG_HAS_REFSEL BIT(1) +#define AD7793_FLAG_HAS_VBIAS BIT(2) +#define AD7793_HAS_EXITATION_CURRENT BIT(3) +#define AD7793_FLAG_HAS_GAIN BIT(4) +#define AD7793_FLAG_HAS_BUFFER BIT(5) + +struct ad7793_chip_info { + unsigned int id; + const struct iio_chan_spec *channels; + unsigned int num_channels; + unsigned int flags; + + const struct iio_info *iio_info; + const u16 *sample_freq_avail; +}; + +struct ad7793_state { + const struct ad7793_chip_info *chip_info; + struct regulator *reg; + u16 int_vref_mv; + u16 mode; + u16 conf; + u32 scale_avail[8][2]; + + struct ad_sigma_delta sd; + +}; + +enum ad7793_supported_device_ids { + ID_AD7785, + ID_AD7792, + ID_AD7793, + ID_AD7794, + ID_AD7795, + ID_AD7796, + ID_AD7797, + ID_AD7798, + ID_AD7799, +}; + +static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd) +{ + return container_of(sd, struct ad7793_state, sd); +} + +static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel) +{ + struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd); + + st->conf &= ~AD7793_CONF_CHAN_MASK; + st->conf |= AD7793_CONF_CHAN(channel); + + return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf); +} + +static int ad7793_set_mode(struct ad_sigma_delta *sd, + enum ad_sigma_delta_mode mode) +{ + struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd); + + st->mode &= ~AD7793_MODE_SEL_MASK; + st->mode |= AD7793_MODE_SEL(mode); + + return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode); +} + +static const struct ad_sigma_delta_info ad7793_sigma_delta_info = { + .set_channel = ad7793_set_channel, + .set_mode = ad7793_set_mode, + .has_registers = true, + .addr_shift = 3, + .read_mask = BIT(6), +}; + +static const struct ad_sd_calib_data ad7793_calib_arr[6] = { + {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M}, + {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M}, + {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M}, + {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M}, + {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M}, + {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M} +}; + +static int ad7793_calibrate_all(struct ad7793_state *st) +{ + return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr, + ARRAY_SIZE(ad7793_calib_arr)); +} + +static int ad7793_check_platform_data(struct ad7793_state *st, + const struct ad7793_platform_data *pdata) +{ + if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 || + pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) && + ((pdata->exitation_current != AD7793_IX_10uA) && + (pdata->exitation_current != AD7793_IX_210uA))) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) && + pdata->clock_src != AD7793_CLK_SRC_INT) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) && + pdata->refsel != AD7793_REFSEL_REFIN1) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) && + pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) && + pdata->exitation_current != AD7793_IX_DISABLED) + return -EINVAL; + + return 0; +} + +static int ad7793_setup(struct iio_dev *indio_dev, + const struct ad7793_platform_data *pdata, + unsigned int vref_mv) +{ + struct ad7793_state *st = iio_priv(indio_dev); + int i, ret = -1; + unsigned long long scale_uv; + u32 id; + + ret = ad7793_check_platform_data(st, pdata); + if (ret) + return ret; + + /* reset the serial interface */ + ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret)); + if (ret < 0) + goto out; + usleep_range(500, 2000); /* Wait for at least 500us */ + + /* write/read test for device presence */ + ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id); + if (ret) + goto out; + + id &= AD7793_ID_MASK; + + if (id != st->chip_info->id) { + dev_err(&st->sd.spi->dev, "device ID query failed\n"); + goto out; + } + + st->mode = AD7793_MODE_RATE(1); + st->conf = 0; + + if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) + st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src); + if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) + st->conf |= AD7793_CONF_REFSEL(pdata->refsel); + if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) + st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage); + if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER)) + st->conf |= AD7793_CONF_BUF; + if (pdata->boost_enable && + (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)) + st->conf |= AD7793_CONF_BOOST; + if (pdata->burnout_current) + st->conf |= AD7793_CONF_BO_EN; + if (pdata->unipolar) + st->conf |= AD7793_CONF_UNIPOLAR; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN)) + st->conf |= AD7793_CONF_GAIN(7); + + ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE); + if (ret) + goto out; + + ret = ad7793_set_channel(&st->sd, 0); + if (ret) + goto out; + + if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) { + ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1, + pdata->exitation_current | + (pdata->current_source_direction << 2)); + if (ret) + goto out; + } + + ret = ad7793_calibrate_all(st); + if (ret) + goto out; + + /* Populate available ADC input ranges */ + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { + scale_uv = ((u64)vref_mv * 100000000) + >> (st->chip_info->channels[0].scan_type.realbits - + (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1)); + scale_uv >>= i; + + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; + st->scale_avail[i][0] = scale_uv; + } + + return 0; +out: + dev_err(&st->sd.spi->dev, "setup failed\n"); + return ret; +} + +static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, + 33, 19, 17, 16, 12, 10, 8, 6, 4}; + +static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0, + 33, 0, 17, 16, 12, 10, 8, 6, 4}; + +static ssize_t ad7793_read_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7793_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", + st->chip_info->sample_freq_avail[AD7793_MODE_RATE(st->mode)]); +} + +static ssize_t ad7793_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7793_state *st = iio_priv(indio_dev); + long lval; + int i, ret; + + mutex_lock(&indio_dev->mlock); + if (iio_buffer_enabled(indio_dev)) { + mutex_unlock(&indio_dev->mlock); + return -EBUSY; + } + mutex_unlock(&indio_dev->mlock); + + ret = kstrtol(buf, 10, &lval); + if (ret) + return ret; + + if (lval == 0) + return -EINVAL; + + ret = -EINVAL; + + for (i = 0; i < 16; i++) + if (lval == st->chip_info->sample_freq_avail[i]) { + mutex_lock(&indio_dev->mlock); + st->mode &= ~AD7793_MODE_RATE(-1); + st->mode |= AD7793_MODE_RATE(i); + ad_sd_write_reg(&st->sd, AD7793_REG_MODE, + sizeof(st->mode), st->mode); + mutex_unlock(&indio_dev->mlock); + ret = 0; + } + + return ret ? ret : len; +} + +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, + ad7793_read_frequency, + ad7793_write_frequency); + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4"); + +static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, + sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); + +static ssize_t ad7793_show_scale_available(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7793_state *st = iio_priv(indio_dev); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0], + st->scale_avail[i][1]); + + len += sprintf(buf + len, "\n"); + + return len; +} + +static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, + in_voltage-voltage_scale_available, S_IRUGO, + ad7793_show_scale_available, NULL, 0); + +static struct attribute *ad7793_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_m_in_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7793_attribute_group = { + .attrs = ad7793_attributes, +}; + +static struct attribute *ad7797_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7797_attribute_group = { + .attrs = ad7797_attributes, +}; + +static int ad7793_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad7793_state *st = iio_priv(indio_dev); + int ret; + unsigned long long scale_uv; + bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR); + + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = ad_sigma_delta_single_conversion(indio_dev, chan, val); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + if (chan->differential) { + *val = st-> + scale_avail[(st->conf >> 8) & 0x7][0]; + *val2 = st-> + scale_avail[(st->conf >> 8) & 0x7][1]; + return IIO_VAL_INT_PLUS_NANO; + } else { + /* 1170mV / 2^23 * 6 */ + scale_uv = (1170ULL * 1000000000ULL * 6ULL); + } + break; + case IIO_TEMP: |